DIGSI 4

DIGSI V4.83 7XS54

ReadMe.rtf
 Note
This Product Information contains important information about DIGSI 4.83.
It is part of the product supplied, and the information in it should be
considered more up-to-date than any other information if uncertainties arise.

Disclaimer of Liability Copyright

Although we have carefully checked the contents of Copyright © Siemens AG 2009
this publication for conformity with the hardware and The reproduction, transmission or use of this document or
software described, we cannot guarantee complete its contents is not permitted without express written
conformity since errors cannot be excluded. The authority. Offenders will be liable for damages. All rights,
information provided in this manual is checked at including rights created by patent grant or registration of a
regular intervals and any corrections that might utility model or design, are reserved.
become necessary are included in the next releases.
Any suggestions for improvement are welcome.

Subject to change without prior notice. Registered Trademarks

Document Release V04.83.00 SIMATIC®, SIMATIC NET®, SIPROTEC®, DIGSI®,
Edition 10.2009 SICAM® and SINAUT® are registered trademarks of
SIEMENS AG. All other product and brand names in this
manual might be trademarks, the use of which by third
persons for their purposes might infringe the rights of their
respective owners.
 Table of Contents

1 Contents of the Consignment

2 Hardware Requirements

3 Software Requirements

4 Installation

5 Release Notes

6 New features and Changes Compared to Earlier Versions

7 Hotline

DIGSI 4 ReadMe.rtf
Edition 10/2009 3
DIGSI 4
Dear customer,

This DVD-ROM contains DIGSI 4, the PC program for configuring, parameterizing,

starting and operating all digital SIPROTEC protection, combination and bay
devices, in its current version 4.83. With a PC or a notebook you can parameterize
the devices via the interfaces and export and visualize the fault data. If ordered, the
following optional packages are also available:

• With the SIGRA evaluation program you can visualize and exactly evaluate
fault records.
• The graphic display on the larger displays can be designed and edited with the
Display Editor as with a graphics program; templates are provided on the CD-
ROM for further processing.
• You can configure additional functions of the devices graphically with the CFC
Editor.
• You can conveniently set remote communication with DIGSI Remote. An
electronic telephone book is available, for example for communication by a
modem line.
• What is new since DIGSI 4.60 is the IEC61850 System Configurator enabling
you to configure and parameterize IEC61850 stations. This tool allows you to
manage subnets, network communicators and their IP addresses and to
connect the information items of different communicators.

All components on this DVD-ROM are available in German, English, French,

Italian, Spanish, Turkish, Russian and Chinese.

To install them you must enter the serial number provided on the product card; then
you can initialize the components you ordered. Please keep the product card with
the serial number in a safe place.

As an alternative, you can enter "Trial" to use DIGSI together with all option
packages for up to 30 days for free.
 Installation notes
The installation notes contain important information that you require to install DIGSI
4.83. Read these notes before installing the software.

1 Contents of the Consignment

Content and Structure of the Product

DVD "Program & Device Drivers"

• IEC61850 browser for the displaying of files according to the norm IEC 61850.
• DIGSI 4 (incl. optional components) in all languages.
• Readme with important additional information in German and English.
• Templates in *.DOC format for labeling strips of the LEDs and function keys on
the device.
• Program for extracting archives created with DIGSI 3
• EXCEL document concerning the replacement of old analog devices (German,
English) with the function to transfer data from analog protection devices into
new digital SIPROTEC devices.
• MS EXCEL AddIn "DIGSI XML Interface" to create and adjust EXCEL sheets
and XML export from EXCEL to DIGSI.
• Program for installing "Web Monitor". This tool allows you to access
SIPROTEC 4 devices using Microsoft Internet Explorer (i.e. without DIGSI),
incl. online help and SIGRA plugin.
• IEC61850 browser for displaying files according to IEC 61850
• IEC61850 NetView (after DIGSI has been installed, the setup file
netviewsetup.exe is located in the DIGIS folder under
...\utilities\IEC61850\NetviewIEC61850)
• Acrobat Reader for reading the manuals (*.PDF).
• For using an external clock in an IEC61850 station, you will find the ICD file
(sntp.icd) on the program CD under ..\utilities\IEC61850\ICD.
• All device drivers released up to October 2009.

DVD "SIPROTEC Download-Area Offline"

• A copy (October 2009) of the complete download area (www.siprotec.com) for
example with device manuals in *.PDF format in various languages, application
examples and all device drivers.

DIGSI 4 ReadMe.rtf
Edition 10/2009 5
2 Hardware Requirements
To work with DIGSI 4.83, you require a PC or laptop with the following minimum
specifications as regards processor performance, RAM main memory and
graphics:

Operating System There are minimum requirements for:

Processor RAM Graphics

MS Windows XP 800MHz 512 MB *) XGA 1024x768 16-bit

Professional color depth
MS Windows Server 2.4 GHz 1 GB XGA 1024x768 16-bit
2003 color depth
MS Windows Vista 1 GHz 1 GB **) XGA 1024x768 16-bit
color depth
*) a memory configuration of at least 1 GB is recommended
**) a memory configuration of at least 2 GB is recommended

If you are dealing with comprehensive projects with several dozens of protection
devices, for example, you should use a PC meeting the latest standards of
performance.

Furthermore, you also need:

• DVD-ROM drive
• Serial interface: RS232 or USB depending on device type (e.g. 7Sx80)
• If you are using the "Aero Glass Style“ of Windows Vista, a high-performance
graphics card with DirectX capability and 128 MB of separate graphics memory
is recommended
3 Software Requirements

Startup Environment

Operating Systems
DIGSI 4.83 is a 32-bit application whose functionality has been especially been
designed for the following operating systems:
• MS Windows XP Professional SP 3
• MS Windows Vista 32-Bit Home Premium, Business, Enterprise and Ultimate
with SP1
• MS Windows Server 2003 Standard Edition with SP2 as Workstation computer

DIGSI 4.83 has not been tested for the following operating systems; use at your
own risks:
• MS Windows XP Professional without any service pack
• MS Windows 2000
• MS Windows Server 2003, SP1, SP1 R2
• MS Windows Server 2008

DIGSI 4.83 cannot be installed or operated under:

• MS Windows 3.1
• MS Windows for Workgroups 3.11
• MS Windows 95
• MS Windows 98
• MS Windows Millennium
• MS Windows NT 4.0
• MS Windows XP Home
• MS Windows XP Professional without any service packs
• MS Windows Vista 32 Bit Home Basic
• MS Windows Vista 64 Bit Version

DIGSI 4 ReadMe.rtf
Edition 10/2009 7
Virtual environment
DIGSI 4 now also supports the virtual environment VMWare (for more information,
see www.vmware.com).
The features of the VM comply with the following operating systems:
• MS Windows XP Professional SP 3
• MS Windows Vista 32-Bit Ultimate and Business with SP1

The performance of DIGSI 4.83 is not ensured in a virtual machine running under
other operating systems for which DIGSI 4 has been approved; use at your own
risks:

Memory Requirements

Memory requirements for DIGSI 4.83

DIGSI 4.83 requires, depending on the installation and number of installed device
drivers, between approx. 800 MB and 1.5 GB of memory on your hard disk.

Necessary Installation Rights

Depending on the configuration, you need administrator rights to install DIGSI 4
and the device drivers. However, DIGSI 4 users only need standard rights.

Compatibility with Other Software

TOOLBOX II
The usage of DIGSI 4.83 and TOOLBOX II V4.10 SP1 on one system is possible.

Spectrum Power CC
The usage of DIGSI 4.83 and Spectrum Power CC IMM V4.20 on one system is
possible.

STEP7 and SICAM plusTOOLS

If the automation software STEP7 or SICAM plusTOOLS is used on the same
computer, then the following must apply to the installed versions for compatibility
 reasons:

DIGSI 4.83 SICAM PAS 6.00 or higher

STEP7 5.4 (with SP4, incl. CFC 7.1, SIMATIC NET 2007)
DIGSI 4.82 SICAM PAS 5.11 or higher
STEP7 5.4 (with SP3.1, incl. CFC 7.0, SIMATIC NET 2007)
DIGSI 4.81 SICAM PAS 5.11
SICAM SAS, RTU, eRTU V5.20, V5.30
STEP7 5.30 (with SP2, incl. CFC 6.1 + Hotfix 1, SIMATIC NET
V6.3)
DIGSI 4.80 SICAM PAS 5.11
SICAM SAS, RTU, eRTU V5.20, V5.30
STEP7 5.30 (with SP2, incl. CFC 6.1 + Hotfix 1, SIMATIC NET
V6.3)
DIGSI 4.71 SICAM PAS 5.11
SICAM SAS, RTU, eRTU V5.20, V5.30
STEP7 5.30 (with SP2, incl. CFC 6.1 + Hotfix 1, SIMATIC NET
V6.3)
DIGSI 4.70 SICAM PAS 5.00 / 5.10
SICAM SAS 5.20
STEP7 5.30 (with SP2, incl. CFC 6.1 + Hotfix 1, SIMATIC NET
V6.3)
DIGSI 4.60 SICAM PAS 5.00 / 5.10
SICAM SAS 5.01 / 5.10
STEP7 5.20 (with SP1 + Hotfix 3, inkl. CFC 6.0 + Hotfix 4,
SIMATIC NET V6.1)
DIGSI 4.50 SICAM 5.00
STEP7 5.20 (with SP1, incl. CFC 6.0)
DIGSI 4.40 SICAM 4.0x
STEP7 5.10 (with SP3, incl. CFC 5.2)
DIGSI 4.40 SICAM 3.10
STEP7 5.00 (with. CFC 5.10)
DIGSI SICAM 2.00/2.10
4.00/4.10 STEP7 4.20 (with. CFC 4.20)

Rational ClearCase
DIGSI 4.83 projects must not be stored on ClearCase drives; that is, drives that are
linked to a ClearCase View (MVFS).

Compatibility of DIGSI 4 Versions

DIGSI 4 is backwards compatible, i.e. in DIGSI 4.83 you can still process device
files that were processed with DIGSI 4.82 or an older version of DIGSI 4

DIGSI 4 ReadMe.rtf
Edition 10/2009 9
 However, device files processed with DIGSI 4.83 cannot be processed with an
older DIGSI version.

4 Installation

4.1 General Notes on Installation

Note
Depending on the configuration of your operating system you require administrator
rights for installation.

If you are using Windows Vista, we recommend to not install DIGSI into the root
directory of a drive.
If you are using Windows Vista and the full version of Step7 V5.4, we recommend
to install DIGSI into the directory suggested during installation.
If you are using Windows Vista with a Chinese language option, we recommend to
install DIGSI into the directory suggested during installation (if necessary on
another drive).

You cannot install DIGSI 4.83 over an existing DIGSI 4 installation. In this case, the
old DIGSI 4 version must first be deinstalled using the deinstallation program (see
below). Important: Following deinstallation, the computer must always be rebooted!
For optimum display of the information during setup, you should set the colors in
the control panel of your computer to at least 65536 colors.
Before starting the setup program, please close all applications (such as MS Word,
etc.) and the control panel window, since you have to restart your computer
following the DIGSI installation so that all the system variables can be entered
completely.

Note
If you want to use STEP7 and/or SICAM on the target computer, you have to install
these software packages before installing DIGSI.

Insert the DIGSI 4 DVD called "Program and Device Drivers" in the drive. The
DIGSI setup program will guide you through the installation. The installation
program starts automatically after inserting the DIGSI 4 DVD. If you have disabled
this function on your computer, start the setup program with the MS Windows
Explorer by double-clicking on the SETUP.EXE in the root directory.
If you want to change the default installation path of the DIGSI 4 setup, make sure
that you do not install directly to the root directory (e.g. D:) of your computer. You
should maintain at least one subdirectory such as "DIGSI4", D:\DIGSI4, for
example.
 The installation of the selected components starts.
Some notes on what is required during setup:
• You can select any drive you want to install DIGSI 4 on. Sufficient hard-disk
space (see chapter memory requirements) must be available.
• Do not install DIGSI 4 in a directory whose path contains non-ASCII characters
(see chapter "Notes on the usage of foreign language character sets").

Follow the on-screen instructions of the set-up program:

• In a selection menu you can now select whether you want to carry out a full
installation (initial installation) or only a partial installation (option packages,
later installation of device drivers). You always require the serial number
indicated on the product card provided. As an alternative, you can enter "Trial"
to use DIGSI together with all option packages for up to 30 days for free.
• You find the manuals and device drivers on the same DVD from which you
perform the installation of DIGSI 4.83. Another DVD includes the bonus
material.

4.2 Operating DIGSI 4 without administrator rights

For working with DIGSI 4.83 without administration rights there are two options:

A. Releasing DIGSI 4 for all users

1. Give all users full access to the Registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Siemens
including all subkeys and values.

2. Give all users full access to the folder where DIGSI 4

was installed (usually C:\Siemens\DIGSI4\) including
all folders and files in it.

DIGSI 4 ReadMe.rtf
Edition 10/2009 11
 B. Releasing DIGSI 4 exclusively for DIGSI users
3. Create a user group named "DIGSI4 Users".

4. Give the group "DIGSI4 Users" full access to the

Registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Siemens
including all subkeys and values.

5. Give the group "DIGSI4 Users" full access to the folder

where DIGSI 4 was installed (usually
C:\Siemens\DIGSI4\) including all folders and files in it.

6. Add all users of DIGSI 4 to the group "DIGSI4 users".

4.3 De-Installation
With the Windows uninstaller you can remove DIGSI 4 with all optional
components from your PC. During the de-installation you remove all data installed
by the installation program of DIGSI 4. The user-specific data like projects remain
unaffected.

1. Select "Settings > Control Panel" in the Windows Start

menu and then "Software".

2. In the list, select "DIGSI Devices".

3. Click "Remove" to start the de-installation. Follow the

installation instructions.

4. If existing, the second entry "DIGSI Devices" has to be

removed.

5. Repeat steps 2 and 3 for the item "DIGSI 4".

5 Release Notes

5.1 Additional Orders

If you have not ordered components of DIGSI 4 that you now want to install, order
these with specification of the serial number: Then you will receive a new serial
number with which these components are made available.

5.2 Using the DIGSI 4 Licenses

Please note that you are not permitted to install one purchased DIGSI 4 license on
more than 10 computers.

5.3 Internet
To also always be up to date in the future, please use the offer at our download
web site in the Internet at the address
http://www.siemens.de/energy/siprotec (in German),
http://www.siemens.com/energy/siprotec (in English).

5.4 DIGSI 4 Courses:

If you are interested in taking a DIGSI 4 course, please contact your sales partner
or our Siemens Power Academy course office by calling +49 (911) 433-7005.

DIGSI 4 ReadMe.rtf
Edition 10/2009 13
6 New features and Changes Compared to
Earlier Versions

6.1 New in DIGSI 4.83

General Information
1. The product now supports Windows XP SP 3.

2. The product now also supports virtual environment

(VM software by VMWare can be found at
www.vmware.com). The following operating systems
are supported in the VM: Windows XP Professional
with SP3, Windows Vista Business and Ultimate (both
with SP1).

Extensions and New Features in DIGSI 4

3. The current STEP7 OEM version (incl. CFC and
Netpro) is supported: Step7 5.4 SP4.

4. The following extensions have been provided for the

interchange format at the DIGSI XML interface for data
import and export:

a. Export and import of long texts in DIGSI XML

for external use or modification.

b. Flexible import and export of parameter

groups; only one settings group is exported in
case of disabled settings group switching. All
parameters of the given settings groups are
given back during import so that a partial
update is required.

c. The export of SIPROTEC V3 setting values

and routing information is possible now.

d. Export and import of IEC 60870-103

addresses of measured values of a
SIPROTEC device

5. If the operating language of DIGSI 4 is set to Russian,

you can perform an automatic transliteration to Cyrillic
texts.

6. Now you can export CFC charts as structured text files

 (ST) for use in other systems and external evaluation.

7. DIGSI 4 now also supports the modem connection

under Windows Vista.

8. DIGSI 4 now also prints the topological SIPROTEC 3

addresses.

Extensions and New Features in the IEC 61850 System

Configurator
9. The system configurator now completely supports the
use of international character sets (Unicode) for
descriptions such as Russian or Chinese; it is also
possible to read the descriptions from SCD files and
save them there.

10. Up to now, the AppID value range for IEC61850 has

been limited from 0 to 63. There is no limitation with
the new DIGSI 4 version. The entire value range can
be used as specified by standard. The expert mode in
the system configurator provides this setting.

11. MAC addresses, used in IEC 61850 for identification

of GOOSE messages and reports, have been
assigned automatically up to. Now you can assign
them manually so that segmentation of the network via
filtering of MAC addresses is possible, leading to a
reduction of the network load in case of a large
number of GOOSE messages. The expert mode in the
system configurator provides this setting.

12. Now you can also assign the GOOSE ID manually.

The GOOSE ID is part of each GOOSE Telegram. For
interoperability scenarios where GOOSE telegrams
are transferred between devices of different
manufacturers it is important, that if another device
evaluates this ID, this can be adapted on the side of
the transmitter in the SIPROTEC 4 device. You find
this attitude in the system configurator in the expert
mode. For GOOSE-Telegrams which are exchanged
between SIPROTEC 4 devices, this ID does not have
a meaning and can remain unchanged.

13. A single device can now also be exported in the format

CID. The CID file contains all IEC 61850 relevant data
of a device, including the communication description to
a client (static reports) and its GOOSE connections to
another devices. It does not contain the settings of a
device. Some system configuration tools from other
manufacturers cannot handle big SCD files and the
derive from it the relevant IEC 61850 data of a device.
The CID file takes remedial action here by extracting
relevant IEC 61850 data of a device from the SCD file

DIGSI 4 ReadMe.rtf
Edition 10/2009 15
and offering it in a simply manageable file for
configuration tools of other manufacturers. An import
of ICD files is not provided by DIGSI and is not
needed.
6.2 Fault corrections
The following fault was eliminated:
ERR_36253
A parallel use of static and dynamic reports in the IEC 61850 was not possible in DIGSI 4.82
without manual corrections. A newly established parameter in the system configurator
permits the choice whether dynamic reports are also needed or whether an automatic
optimization using purely static reports can take place.

ERR_37804
At the online change of settings, DIGSI 4 has an extended mechanism. This mechanism
recognizes now also for special cases the differences to the offline data storage and offers a
synchronization.

ERR_37151
The USB/RS232 converter is recommended for the connection of the SIPROTEC 4 devices to
PCs without a serial interface. It does not work under MS Windows Vista.

ERR_36329
After upgrading the device driver of a SIPROTEC 4 device and adding an EN100
communication module later, the IED name of the device was empty and not alterable. The
IED name of the SIPROTEC 4 device remains unchanged after the upgrade now and is
furthermore alterable.

ERR_35283
An improved version of the Russian online help of the CFC blocks is available now.

ERR_37997
In some situations, the maximum number of cycle counters supported by the SIPROTEC device
could not be used. It is possible now to use all available cycle counters.

ERR_38848
Problems occurred in the interplay with USB drivers of other manufacturers. These problems
prevented a communication with the SIPROTEC devices connected over USB cables. A
stable connection is possible now, if USB drivers of other manufacturers exist.

ERR_36367
A fault prevented the correct operation of "Check switching authority at Remote commands” on
IEC 61850 systems. The execution of this function is possible now without problems.

DIGSI 4 ReadMe.rtf
Edition 10/2009 17
ERR_37259
The behavior of the system while changing the online and offline parameter set at the same
time has been improved.

ERR_36175
The compatibility during the import of ICD and SCD files of other manufacturers has been
improved.

ERR_39856
The performance during the creation of reports in the System configurator (IEC 61850) has
been improved significantly.

ERR 35264
The sporadic system failures during settings block comparison have been corrected.

ERR_35350
It is now possible to add user-defined information to newly created groups in the Excel Addln.

ERR_35608
From now on, you can also install DIGSI 4 on the operating system variants MS Windows Vista
Enterprise and Home Premium.

ERR35640
From now on, you can use the front or rear interface of the 7SS522 central unit without
restrictions to communicate between the central unit and the bay units 7SS523/7SS525
under DIGSI 4.

ERR_39448
System visualization of the 7SS522 central unit now also displays the current measured values
of the check zone.
6.3 Known Problems
1. ERR_36367: The check box “remote commands (system interface DIGSI)“ is
without function.
Situation:
Up from EN100 module firmware version V4.0 the check box “remote
commands (system interface DIGSI)“ is without function. Regardless of whether
the check box is activated or deactivated the function “remote commands” is
always active in the device.
Caution:
In DIGSI V4.83 the check box “remote commands (system interface DIGSI)“ is
disabled for the user. The check box may be activated or deactivated which
depends on its previous usage, but this has no effect on the by default activated
function of remote commands in the device (up from EN100 V4.0).

2. Changing the Operating Language: No Effect on the CFC Border

Situation:

You can change the operating language of the DIGSI 4 Manager any time.
Caution:

If the operating language is changed, the standard device texts in the edge bars
of a CFC chart remain in the language originally set. You can only obtain these
texts in the desired language when you delete and then restore every
connection to the edge bar.

3. Operation by several DIGSI users at the same time (No. 911)

Situation:

It is possible to operate a device via the front or the rear interface. Even for bus
users (PROFIBUS FMS, ETHERNET), concurrent access by several users is
possible.
Caution:

For the moment, no priority can be applied to communication channels. Access

via one connection may disturb the concurrent communication for another
connection (changing the baud rate, transfer of parameters).

4. Inserting a Device: "Server is busy"

Situation:

Devices are managed in the DIGSI 4 Manager. They can be selected from the

DIGSI 4 ReadMe.rtf
Edition 10/2009 19
 device catalogue and inserted in a project.
Caution:

When inserting a device with a large range of functions (e.g. 7SJ63...), the
message "Server is at full capacity" may appear. This message is meaningless:
The device will still be inserted correctly.
 5. Hierarchical CFC Charts Cannot Be Used

Situation:

With the new version, the ability to save modules and their circuitry in a new
macro module (hierarchical charts) is offered in the CFC option package.
Caution:

At present, such blocks cannot be used in different charts.

6. Supposedly Missing Projects (No. 13232)

Situation:

You have installed and started the new version, and now you want to open a
project edited previously.
Caution:

Projects which have just been created, are initially not visible.
Select "Open" and then the button "Search..." .
In the next dialogue you mark the desired projects and confirm them with "OK".

7. DIGSI 4 Manager does not react

Situation:

An existing modem connection is interrupted (e.g. by disconnecting the cable

from the PC modem).
Caution:

The DIGSI 4 Manager then no longer reacts, as the modem connection is not
re-established. Close the so-called ComTask (icon in system area of the
Windows taskbar).

8. No Comments during Export/Import (No. SE.144.3944.1)

Situation:

A device is exported and then reimported.

Caution:

All comments get lost during this procedure.

DIGSI 4 ReadMe.rtf
Edition 10/2009 21
9. No PROFIBUS-FMS connections

Situation:

In the COM-PROFIBUS configuration, a connection for SICAM RECPRO is

configured.
Caution:

The DIGSI-PROFIBUS-FMS connections then no longer work. In the COM-

PROFIBUS configuration for the CP, VFD 2 must be used for RECPRO. For
connections from SIPROTEC devices, the VFD 1 is to be used when available
(otherwise 3).

10. Comparison of devices with user-defined information

Situation:

Although it appears to the user that configurations are identical, differences may
be displayed when con-figuring user-defined information during the comparison.
Caution:

The reason for this is that this information has been inserted in the matrix in a
different order.

11. Icons of the busbar protection system editor can be copied

Situation:

The user-defined icon libraries of the system configuration cannot be exported

within the editor from one computer to another computer.
Caution:

Copy the user-defined libraries directly in the file system using the MS Explorer.
User-defined dynamic icons are located in the directory
...Digsi4\SSLib\SSData\dyndin
User-defined static icons are located in the directory
...Digsi4\SSLib\SSData\stauser.
 12. Incomprehensible error messages for modem communication (No.438)

Situation:

Working with a modem communication, incomprehensible error messages (and

numbers) may occur. These messages are generated by a windows component
(TAPI) used in DIGSI.
The following error codes are known:

0x80000005

The call could not be executed due to a busy line or a missing dialing tone, for
example.

0x80000048

Local modem not found due to a busy interface, for example.

0x8000004B

If this error occurs while initializing a modem, you have to send a reset
command (AT&F or ATZ, depending on the modem type) to the modem. This
error may also occur if the interface is busy while attempting to initialize a
modem.

0x80000022

An invalid character was entered in the phone book: For example, a letter or an
invalid country code.

13. No measured value update for PROFIBUS FMS (No.391, 10566, 10614,
13052)

Situation:

If windows for measured values are open for a longer time (1 hour) the values
may not be updated. DIGSI device editor may crash. This error applies for
PROFIBUS FMS connections only.
Caution:

If DIGSI crashes, you have to close the task in the task line.

DIGSI 4 ReadMe.rtf
Edition 10/2009 23
14. Upgrading a SIPTROTEC device to IEC61850 (No.1877)

Situation:

Devices with firmware version 4.50 may be upgraded for IEC61850

communication via the installation of a communication module. This requires a
firmware and a parameter set upgrade.
Caution:

When the firmware is upgraded and the communication module is installed,

proceed as follows:
- Upgrade the parameter set (use the function provided in DIGSI manager)
- Register the communication module via the property pages of the device
(tab "Communication modules").
Now, you can use the device as IEC61850 communicator.

15. Error during import of variables in WinCC (No. SE.144.13535.1)

Situation:

Variables that only differ in special characters or capital/small letters, cannot be

read into WinCC.
Caution:

Please adapt such texts in SICAM PAS or SICAM SAS.

16. Close DIGSI before archiving a project (No. 26699)

Situation:

If the DIGSI Device Editor was opened at least once before archiving a DIGSI
project, you have to close and re-open DIGSI Manager in order to archive the
project.

17. After a device upgrade timer blocks in the CFC charts must be deleted and re-
inserted (No. 26598)

Situation:

After a device upgrade to a higher version (e.g. V4.50 => V4.62) and
subsequent compilation of the CFC charts, for "old" devices (<=V4.50), an error
message will be displayed saying that the timer blocks are in the wrong task
level.
Solution:

After a device upgrade, replace all timer blocks in the CFC charts with new
timer blocks from the catalog. Then update all blocks (Options => Block types)
and compile the CFC charts.
 18. Unnecessary transfer of parameter set during online connection (No. 23060)

Situation:

When connecting to a protection device, always the entire parameter set is

transferred if the place of the connection (PC) changes, but the parameter set on
the PCs is identical. This is especially critical if you access a device from different
locations via a modem connection. Parameter set transfer may take up to several
minutes depending on the transfer rate.

19. CFC memory blocks are deleted (No. 33589)

Situation:

Certain changes in the parameter sets initiate a restart. As a consequence, the

data stored in the CFC memory blocks are lost.

20. The assignment of switching cycle counter is limited (No. 33936)

Situation:

When assigning switching cycle counters to commands, you may receive the
message that the limit has been reached.
Caution:

To cancel existing assignments, you should select "Others" in the "Switch type"
field for the corresponding command under the IEC61850 properties. You can
now make additional assignments.

21. Data transmission stop not working (No. 33248)

Situation:

The data transmission stop does not work for a SIPROTEC V4 device
(IEC60870-5-103). Although the transmission stop is activated, messages and
measured values are still being transmitted.
Solution:

Open your device in DIGSI and check whether the data transmission stop
(DataStop) is routed to the sys-tem interface as the destination in the
configuration matrix..

DIGSI 4 ReadMe.rtf
Edition 10/2009 25
 22. DIGSI not offered in the start menu under Vista (No. 34335)

Situation:

Under MS Vista, the entry "Siemens Energy" can not be opened directly in the
Windows start menu when using a Chinese operating system.
Solution:

Switch to the "classical view" in Vista.

23. EXPORT XML files for T103Redundant (No. 34674)

Situation:

After Import of XML-file created by DIGSI for "T103 Redundant" the commands
are missing.
In this file DIGSI uses the XML Attribute "DUType", but PAS is expecting
"DUTyp" during import..
Solution:

Replace the item "DUType" with "DUTyp" using a text or XML-editor.".

6.4 License information

This product includes software developed by the Apache Software Foundation
(http://www.apache.org/).

7 Hotline
If you have problems with DIGSI, contact our Customer Support Centre.

Fon: +49 (180) 524-7000

Fax: +49 (180) 524-2471

eMail: support.energy@siemens.com

FAQ: http://www.siemens.com/energy-support