IIESl Membership Guideline PDF

INSTITUTION
INSTITUTION OFOF INCORPORATED

INCORPORATED ENGINEERS, SRI
ENGINEERS,SRI LANKA
LANKA
GUIDELINES FOR
GUIDELINES FORMEMBERSHIP
COMPETENCY BASED
MEMBERSHIP
2011.12.17
1.3.2010
Version:01
THIS COPYIIESL-Guidelines
WAS APPROVED ATforTHEMembership Type text
COUNCIL OF MANAGEMENT Page 1
MEETING NO: CM03 OF SESSION 2010 2011 ON 2010.10.09.
COUNCIL DECISION: 2010 -11/ CM03/ 011
1 2 / 2 B ,[ 1G2A/L2LBE , RGOAAL LDE, RMOOA R

D ,A T
MUOW
R AAT, U SWRAI ] L A N K A
http://www.iie.lk
Institution of Incorporated Engineers, Sri Lanka
Guidelines for Submission of Applications

for
Class of Member and Associate Member
IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 2

PREFACE
Institution of Incorporated Engineers, Sri Lanka (IIESL) established in 1977 as All Ceylon Engineering
Diplomates Association, was transformed to a professional body under the name of Institute of
Engineering Diplomates, Sri Lanka, by an Act of Parliament(Act No. 64 of 1992). It was renamed with
the present status as Institution of Incorporated Engineers, Sri Lanka by an Act of Parliament (Act
No.11 of 2000). IIESL has a wide opening for personnel of all level in the field of Engineering Technology.
Incorporated Engineers are the internationally recognised category of Engineers in the field of
Engineering Technology, who effectively manage the construction, operation, maintenance and project
management functions, by implementing appropriate technology.
Incorporated Engineers are specialists in the development and application of todays technology,
managing and maintaining applications of current and developing technology at the highest efficiency.
With their detailed knowledge and understanding of current engineering applications, they possess the
skills and know-how to make things happen and often have key operational management roles. They
have detailed understanding of a recognised field of technology and exercise independent judgement
and management within that field. They add substantial value, independently and as leaders, to any
organisation where technology is a core activity or supports the business.
The work of Incorporated Engineer combines the need for a strong grasp of practical situations and
applications, with the intellectual challenge of keeping abreast of leading-edge developments in their
particular field. For this purpose they need a strong understanding of scientific and engineering
principles and a well-developed capacity for analysis.
The competency standard represents the level of preparation necessary and adequate for entry to
practice leading to these responsibilities. An Associate Member would be expected to work initially
under the supervision and guidance of more experienced Incorporated Engineers, while experience is
gained. Associate Members are encouraged to undertake IIESL approved Professional Development
Programs while developing the practice competencies that will qualify them for a competency
assessment and the status of Incorporated Engineer.
These competencies correspond to completion of a 3-year Engineering Diploma or equivalent

educational qualification accredited by Institution of Incorporated Engineers, Sri Lanka and relevant
number of years of post-qualifying experience. It is not expected that candidates will have demonstrated
every detail of the knowledge, competencies and attributes that follow; but they must demonstrate at
least the substance of each element. Assessment will be made in a holistic way.
This document describes the Competency Standards required for Associate Member and Member
category of the institution memberships.

CONTENTS
1. Section A- Introduction and Background 1
1.1 Introduction 2
1.2 Pathways to Recognition 4
1.3 Accredited Sri Lankan Qualifications 4
1.4 Accredited Overseas Qualifications 4
1.5 Competency Demonstration 5
1.6 Certification of Copies of Documents 5
1.7 Steps in the Assessment Process 6
2 Section B Self Assessment 9
2.1 Introduction 10
2.2 Determination of Membership Category 10
2.3 Institution of Incorporated Engineers, Sri Lanka Competency Standards 10
2.4 Using Self-Assessment Charts 10
12
3 Section C Competency Standards & Self-Assessment Charts
3.1 Incorporated Engineer or Corporate Member General Description of Role 13
3.2 Incorporated Engineer or Corporate Member-Units, Elements & Indicators of Competency 14
3.3 Incorporated Engineer Self Assessment Chart 20
3.4 Associate Member General Description of Role 22
3.5 Associate Member Units, Elements & Indicators of Competency 22
3.6 Associate Member Self Assessment Chart 29
4 Section D Continuing Professional Development Record (CPD) 31

5 Section E Compiling a Submission 33
5.1 Steps in preparing a Submission 34
5.2 Complete Application Form 35
5.3 Certified Copies of Qualifications & Academic Record(s) 35
5.4 Certification of Documents 35
5.5 Components of the CDR 35
5.5.1 Introduction 35
5.5.2 Cover Page 36
5.5.3 Second page 36
5.5.4 Curriculum Vitae CV 37
5.5.5 Identification of Continuing Professional Development 37
5.5.6 Writing Your Career Episode (CE) 38
5.5.7 Preparation of the Summery Sheet 40
5.6 Assessment of the CDR 41
6 Section F Check List of Documentation 42

6.1 Check List of Documentation 43
IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 4

44
7 Annexure to Section C
7.1 Annexure 1 Competency Standards Applicable for year 2010 45
7.2 Annexure 2 - Membership Application Form 46
7.3 Annexure 3 CV 48
1. SECTION A
Introduction and Background

1.1 Introduction
The Institution of Incorporated Engineers, Sri Lanka consists of the following classes of Membership:
CORPORATE MEMBERS: Fellows
Members
NON CORPORATE MEMBERS: Honorary Fellows
Associate Members
Associates
Students
Companions
In terms of bye laws of the Institution of Incorporated Engineers, Sri Lanka following classes of members
of the Institution shall be entitled to use appropriate designatory abbreviations as mentioned below ;
Honorary Fellow - Hon. FIIESL

Fellow - FIIESL
Member - MIIESL
Associate Member - AMIIESL
The Abbreviations stand for the following:
Hon.FIIESL - Honorary Fellow of the Institution of Incorporated Engineers, Sri Lanka

FIIESL - Fellow of the Institution of Incorporated Engineers, Sri Lanka
MIIESL - Member of the Institution of Incorporated Engineers, Sri Lanka
AMIIESL - AssociateMember of the Institution of Incorporated Engineers, Sri Lanka
In addition to the above, Corporate Members (Fellows and Members) of the Institution; in terms of the
Bye Laws; entitle to use designatory title of Incorporated Engineers with abbreviations IEng. at the
end of their names.
The guidelines has been developed by the Institution of Incorporated Engineers, Sri Lanka and
approved by its Council of Management in order to assist the prospective candidates in the application
process for enrolling in to following classes of membership;
Member
Associate Member
in the Register of Institution of Incorporated Engineers, Sri Lanka (IIESL).

Shown below is a description of the engineering qualifications and the workplace role required to qualify
for each membership category.
Member
Academic qualification for this category is a three year full time engineering technology diploma or any
equivalent qualification conducted by an academic institution and accredited by the Council of
Management of IIESL after successful completion of twelve years of schooling, or equivalent
And
minimum of 10 years of post- qualifying work experience in the field of Engineering Technology with
required competencies.
Or
7 years of post-qualifying work experience in the field of Engineering Technology with required
competencies for Associate Members
The Member;
Focuses on interactions within the system
Modifies and adapts established engineering practices
Advances engineering technology.
Associate Member
Academic qualification for this category is a three year full time engineering technology diploma or an
equivalent qualification conducted by an academic institution and accredited by the Council of
Management of IIESL after successful completion of twelve years of schooling, or equivalent with
required competencies
The Associate Member:
Focuses on specific elements of the system
Works within codes and applies established practices and procedures.
Further details on the general role descriptions for each occupational category and competencies
required are presented in Section C
Associate
Should be more than 35 years of age and should have being engaged in the practice or associated with
any discipline of engineering, and have attained a position of responsibility as an Engineer or by virtue

of connections with engineering or otherwise be qualified to concur with engineers in the advancement
of the field of engineering.
Student
Should have successfully completed 12 years of schooling and are aspiring to become Incorporated
Engineers. This category of membership is not available in International Branches of IIESL.
1.2 Pathways to Recognition

There are three pathways to recognition of your qualifications:
Through Accredited Engineering Academic Qualifications and a Competency Demonstration.
OR
Through reciprocal memberships programmes with other professional organisations.
OR
Through Mature candidate Route approved by IIESL not included in this document.
1.3 Accredited Sri Lankan Qualifications

The IIESL accredited Sri Lankan Engineering Academic Qualifications as at 2010/10/09 are as follows:
National Diploma in Technology (NDT) Institute of Technology, University of Moratuwa,

Moratuwa, Sri Lanka.
National Diploma in Technology (NDT) - Hardy Senior Technical Institute, Ampara, Sri Lanka.
Higher National Diploma in Engineering (HNDE) Advanced Technological Institute of Sri Lanka
Institute of Advanced Technological Education, Colombo, Sri Lanka
National Diploma in Engineering Science (NDES) Institute of Engineering Technology,
Katunayake of National Apprenticeship and Industrial Training Authority, Sri Lanka.
Diploma in Technology (Dip Tech) - The Open University of Sri Lanka.
Part II Examination of Institution of Incorporated Engineers, Sri Lanka
Any other qualifications or reciprocal programme accredited by the Council of Management of

1.4 Accredited Overseas Qualifications

These are the memberships of accredited overseas professional engineering bodies that are recognised
through formal agreements with engineering accreditation bodies in other countries. These
qualifications are readily recognizable through database listings of accredited programs.

Full Technological Certificate (FTC) (Prior to 1991) - City & Guilds Institute, United Kingdom
Full Technological Diploma (FTD) - City & Guilds Institute, United Kingdom
Licentiateship (LCGI) or Graduateship (GCGI) of City & Guilds Institute, United Kingdom
Full membership of CICES Chartered Institution of Civil Engineering Surveyors, United Kingdom
through the exclusive mutual membership route
Any other qualifications or reciprocal programme accredited by the Council of Management of
1.5 Competency Demonstration

If you possess one of those academic qualifications and do not have membership of professional
engineering bodies recognized through the agreements listed above, you may seek recognition through
a competency assessment process. This process consists of the following;
1. Submission of Competency Demonstration Report (CDR)
2. Professional Review - Professional Review (PR) process will consist of e v a l u a t i o n o f

c o m p e t e n c i e s based on the CDR including Viva.
The Competency Demonstration Report (CDR) provides you the opportunity to establish your
engineering knowledge and competencies that are equivalent to those of the appropriate occupational
category within the engineering profession in Sri Lanka and Overseas. Those competency requirements
are presented in Section C of this Guideline.
Section C of this Guideline also provides you with Self-Assessment Charts for each occupational
category to see if you can demonstrate the competency elements and indicators required for
different membership category.
If you are satisfied that you have demonstrated required competency elements and indicators you
may prepare your submission. If this is not the case you should undertake further study and/or
workplace activity to develop the required competency elements and indicators before making your
application.
1.6 Certification of Copies of Documents

Applications for competency assessments may get delayed if documents are not properly certified.
The assessors will contact you by letter or e-mail if there are any omissions with regard to certification.
Please make sure that your e-mail and contact addresses are up to date.
Applicants should note the following points concerning certification of documents:
1. Certified copies of previously certified copies will not be accepted. You must provide a properly
certified copy of the ORIGINAL document.

2. Proper certification will appear on each page to be certified, and should show;
(a) the signature of the person certifying the document
(b) The name of the person certifying the document. This should be clearly printed or
evident in the official stamp.
(c) The address, the telephone number and the e-mail address (if available) of the person
certifying the document and,
(d) Where possible an official stamp indicating the status of the person certifying the
document (eg. Justice of the Peace, Commissioner for Oaths or Notary Public.)
The following classes of persons are authorised to certify copies of documents:
A current corporate member of Institution of Incorporate Engineers. The Membership number

must be shown.
An authorized staff member of IIESL
An officer of Sri Lankan Diplomatic Mission
A Notary Public authorised in the country of application
A Commissioner for Oaths (Declarations) authorised in the country of application
A Solicitor, Barrister or Judge authorised in the country of application
A Justice of the Peace authorised in the country of application
If you employ the services of a legal firm, the solicitor must sign each page. It will not be satisfactory for
the name of the law firm to appear in lieu of the actual name and signature of the solicitor certifying
your documents. Collective responsibility implied in the use of we, accompanied by the name of the
law firm, is not acceptable.
1.7 Steps in the Assessment process

The following sections in this guideline will assist you to undertake the self-assessment and prepare your
Submission.
Section B: Self-Assessment
This part of the document guides you through a self-assessment process. By undertaking the self-
assessment you can determine whether you have the necessary competencies to justify proceeding with

your application. If you feel you have the necessary competencies you should proceed to Section C of
this guideline.
You should note however that a positive self-assessment is not a guarantee of success. Your application
will be rigorously assessed on the basis of the information and evidence you provide.
Section C: Competency Standards & Self-Assessment Charts

These charts allow you to determine your level of competency. Required competencies for each
membership is in the Annexure 1 in Annexure to Section C.
Section D: Continuing Professional Development Record
You should complete the application form provided. This form may be collected from IIESL office or
downloaded from the website (http://www.iie.lk ).
Section E: Compilation of a Competency Demonstration Report (CDR)

Competency Demonstration Report or CDR is a substantial component of your application
which provides the basis for IIESL for assessment of your competencies. You should follow the
guidelines in Section E carefully when compiling your CDR.
This part of the Document provides you with guidelines for a description of your personal engineering
practice and an identification of your engineering competencies.
Section F: Check List of documentation

This section provides you with a check list of the required material and dispatch address.
Application Form and guidelines are available from the IIESL website (http://www.iie.lk) or upon request
by e-mail iie@sltnet.lk or iiesl@iie.lk . You should complete the application form provided. If there are
any deficiencies in your submission you will be notified in writing. If the application is successful you will
receive a letter confirming the same.
Please Note that assessment of your application will not be processed if you submit copies of
documents where the class of person certifying the copy is not one of those listed above or where the
requirements stated above are not complied with.
The assessment fee is specified on the IIESL website (http://www.iie.lk).

Steps in the Competency Demonstration Process
Read Membership Guideline Document

which includes IIESL Competency
Standards (downloadable from IIESL
website) http://www.iie.lk
Determine Membership Category applicable to you
Undertake Preliminary Self-Assessment
No Decide whether Yes

to proceed with
CDR
Organise additional workplace Prepare Competency

practice, professional Demonstration Report (CDR)
development and/or
undertake further study to
acquire the competencies
Submit to Institution of
Incorporated Engineers, Sri
Lanka with specified fee

2. SECTION B
Self-Assessment

2.1 Introduction
The purpose of this section is to enable you to determine whether you have the necessary competencies
to proceed with your application for a formal Competency Demonstration Report (CDR) assessment.
Before proceeding with your self- assessment you will need to determine to which membership category
in the IIESL you wish to be assessed.
2.2 Determination of Membership Category

Re-read the Section A and familiarise yourself with the specified qualifications and experience required
for enrolment in IIESL Membership categories. Further details of the role descriptions can be found
in Section C. You should determine your most appropriate membership category by considering your
engineering qualifications, experience and your workplace role.
2.3 Competency Standards of Institution of Incorporated Engineers,

Sri Lanka
IIESL has developed a set of Competency Standards for each membership category. These standards are
identified as the minimum requirement to practice in the engineering profession. Competencies are
expressed in terms of units, elements and indicators. The unit title describes a particular area of
performance, and the elements are the necessary components or activities which make up that unit of
competency. Each element has a set of indicators which describe ways in which the element would
typically be demonstrated.
The competency standards for each occupational category are shown in detail in Section C. The
Section C should read in conjunction with Annexure to Section C of the document for the applicable
competency standards for the current year.
2.4 Using the Self-Assessment Charts

Self-Assessment Charts for each of the membership category are shown in Section C. Use the chart to
make a self-assessment of your competencies in the membership category for which you are seeking
assessment. Carefully look at each of the three core competencies and their respective elements. If you
feel that you have successfully demonstrated these competencies in your engineering practice then
make notes in the comments column as to when, where (eg: the work site), and how you applied these
competencies.
Note:
These charts are for your personal use only. Do not submit these with your formal application for
assessment.

Deciding whether to proceed
If you can demonstrate that you have successfully applied required specified competencies, you should
now compile your Competency Demonstration Report (CDR).
Note:
If you have completed the self-assessment and cannot demonstrate all of the competencies, it is
recommended that you do not proceed with the preparation of your CDR.
Instead you should take steps to develop the necessary competencies. You can do this by organising
additional professional work or by undertaking professional development programs and/or further
study so that you acquire those competencies. When you feel that you have acquired the competencies
at the required level of performance you should undertake another self-assessment to decide whether
to proceed with a formal assessment.

3. Section C
Competency Standards
and
Self-Assessment Charts

3.1 Incorporated Engineer or Corporate Member
General Description of Role
Incorporated Engineers normally operate within a relatively well-defined technical environment, and
undertake a wide range of functions and responsibilities. They are often specialists in the theory and
practice of a particular branch of engineering technology or engineering-related technology, and in its
application, adaptation and management in a variety of contexts. Their expertise lies in familiarity with
its current state of development and its most recent applications. Within their specialist field, their
expertise may be at a high level, and fully equivalent to that of a competent engineer; and they are
expected to carry wide-ranging responsibilities for stakeholder interactions, for system integration, and
for synthesising overall approaches to complex situations and complex engineering problems.
The work of Incorporated Engineers combines the need for a strong grasp of practical situations and
applications, with the intellectual challenge of keeping abreast of leading-edge developments in their
particular field. For this purpose they need a strong understanding of scientific and engineering
principles and a well-developed capacity for analysis. The work of technologists is most often concerned
with applying current and emerging technologies, often in new contexts; or with the application of
established principles in the development of new practice. They may also contribute to the
advancement of particular technologies.
Certain Incorporated Engineer qualifications include an emphasis on technical management as well as

grounding in a particular area of technology. Technical management is seen as an appropriate field of
specialisation in itself, and many technologists build their career paths in this direction. Examples of
such specialisation include product development for manufacturing, manufacturing management, mine
management, and management and maintenance of processing plants, complex building services, or
testing laboratories.
Persons may also be recognised as Incorporated Engineers who hold degrees in fields related to
engineering, and who have developed expertise and experience in applying their knowledge in
conjunction with engineering work. Examples might be in geology and geo-techniques, information
technology and software development, mining, biomedical technology, optical communications,
renewable energy systems, agriculture, and so on.
The competencies of Incorporated Engineers equip them to approve and certify many technical
operations such as calibration and testing regimes, compliance with performance-based criteria for fire
safety, and design of components and sub-systems and of installations such as building services in
circumstances that do not call for significant new development. Such certification should be fully
acceptable in the public domain and should not require further endorsement by other practitioners
perceived to be more highly qualified.

Incorporated Engineers may lead or manage teams appropriate to these activities. Some may establish
their own companies or may move into senior management roles in engineering and related enterprises,
employing professional engineers and other specialists where appropriate.
3.2 Incorporated Engineer (Corporate Member)

Units, Elements and Indicators of Competency
Units are numbered CM1, CM2 etc. Elements are numbered CM1.1, CM1.2 etc. Indicators are
denoted by a, b, c etc.
CM1 KNOWLEDGE BASE
CM1.1 Knowledge of science and engineering fundamentals
a. Sound knowledge of mathematics to the level required for fluency in the techniques of
analysis and synthesis that are relevant to a branch of engineering technology and its
major areas of application, and to related technologies
b. Sound basic knowledge of the physical sciences, life sciences, and/or information
sciences
c. Underpinning the knowledge of technology and related technologies, and appreciation
of scientific method
d. Strong grasp of the areas of engineering science that support the technology
e. Ability to work from first principles in tackling technically challenging problems in the
area of specialisation
f. Appreciation of the future need to apply fundamental knowledge to ongoing
developments in the technology and to new technologies relevant to the area of
application
CM1.2 In-depth knowledge and understanding of the technology and its applications
a. Knowledge of all aspects of an engineering technology and its major industrial,

commercial and community applications; and/or of the technologies supporting a
particular industry sector
b. Competence in applying mathematics, science and engineering science to the analysis
and solution of representative problems, situations and challenges in the technology
and its utilisation
c. Knowledge of relevant materials and resources and their main properties, and ability to
select appropriate materials, resources and techniques for particular applications
d. Ability to recognise results, calculations or proposals that may be ill-founded, identify
the source and nature of the problem and take corrective action
e. Awareness of current technical and professional practice, critical issues, and the current
state of developments in the technology and its major areas of application

f. Understanding of how new developments in the technology or its areas of application
relate to established theory and practice, and to other technical areas with which they
may interact
g. Advanced knowledge in at least one area of application of the technology, to a level that
engages with current developments in that area
h. Ability to ensure that applications and extensions of the technology are soundly based
in theory and fundamental principles
i. Formal knowledge of the management of technical operations including business,
financial, human resource, logistic, marketing, organisational, and procurement aspects,
product and process development, and managed approaches to innovation
CM1.3 Techniques and resources
a. Familiarity with mathematical and physical modelling techniques relevant to the field of
specialisation; ability to utilise these techniques for purposes of analysis and design, and
understanding of their applicability and limitations
b. Ability to characterise materials, devices and systems relevant to the field of
specialisation
c. Awareness of relevant current tools for analysis, simulation, synthesis and design,
particularly computer-based tools and packages, and competence in their use
d. Appreciation of the accuracy and limitations of such tools and the assumptions inherent
in their use. Ability to verify the credibility of results achieved, preferably from first
principles, to a reasonable approximation
e. Proficiency in the range of laboratory and testing procedures relevant to the technology,
and strong grasp of principles and practices of laboratory safety.
f. Ability to design and conduct relevant experiments, devise appropriate measurements,
analyse and interpret data and form reliable conclusions
g. Ability to perceive possible sources of error, eliminate or compensate for them where
possible, and quantify their significance to the conclusions drawn
Ability to construct and test representative components or sub-systems in a laboratory

setting
CM1.4 General Knowledge
a. Educational background and/or general knowledge necessary to understand the place

of engineering and technology in society
CM2 ENGINEERING ABILITY
CM2.1 Ability to undertake problem identification, formulation, and solution

a. Within the relevant field of specialisation, ability to identify the nature of a technical
problem, formulate an approach to its solution, make appropriate simplified
assumptions, and achieve a solution
b. Ability to quantify the significance of the assumptions to the reliability of the solution
and take further steps if necessary
c. Ability to investigate a situation, or the behaviour of a system, and identify any
underlying causes relevant to the field of specialisation
d. Ability to recognise problems that have origins outside the area of specialisation and
communicate them to an appropriately competent person
CM2.2 Ability to apply and adapt the technology
a. Knowledge of the factors likely to be important in particular areas of application of the

technology, and ability to understand and manage them
b. Ability to appreciate and manage the interactions between the technology and other
parts of an overall technical system, define operating interfaces with other technologies,
equipment or systems, and ensure that such interfaces function effectively
c. Ability to adapt the technology to a variety of situations, understanding its properties,
possibilities and limitations
d. Ability to identify and solve effectively a wide variety of practical problems arising from
application of the technology in different contexts
CM2.3 Proficiency in design of equipment or installations utilising the technology
a. Ability to design equipment or installations utilising the technology

b. Experience in personally conducting a significant design exercise to achieve an
engineering outcome to professional standards, demonstrating capacity to;
understand and document the required outcomes of a project or program utilising the
technology
evaluate and confirm the appropriateness of the proposed use of the technology
develop and complete the design using appropriate engineering principles, resources,
processes, codes and standards
specify the equipment and operating arrangements needed
quantify the engineering tasks needed to implement the design
devise and document tests to verify performance
if appropriate, produce technical manual for users of the equipment or installation
c. Alternatively, experience as a member of a team conducting such a significant design

exercise, and ability to demonstrate a key contribution to the team effort and the
success of the outcome
d. Ability to ensure that all proposals and designs emphasise safety, reliability,
maintainability, cost effectiveness, product quality and value, and user friendliness
CM2.4 Ability to conduct an engineering project
a. Experience in personally conducting and completing an engineering project appropriate

to the field, to a high standard; or experience as a member of a team conducting and
completing such a project, and ability to demonstrate a key contribution to the team
effort and the success of the outcome
b. Have produced at least one substantial report demonstrating mastery of the subject
matter and ability to communicate complex material clearly
CM2.5 Ability to ensure reliable operation
a. Thorough understanding of standards and codes of practice relating to the technology

and its applications
b. Understanding of the concept and processes of inspection and testing of equipment or
installations which utilise the technology, identification of shortcomings, and where
appropriate certification of compliance with standards and codes and/or performance-
based criteria
c. Where the technology is itself a medium for measuring or testing materials,
components, or quantities, ability to conduct such measurements or tests and accept
responsibility for accuracy and validity
d. Understanding of fundamental properties and limitations of the technology and ability
to identify circumstances that suggest a significant problem
CM2.6 Responsibility as technical expert
a. Ability to communicate the significance of the technology and its use in a particular
context, to other technical and non-technical stakeholders in a project or program
b. Ability to identify, assess, communicate and manage technical risk associated with use
of the technology
c. Appreciate the interactions between technical systems and the social, cultural,
environmental, economic and political context in which they operate; appreciate the
imperative of sustainability, and approaches to developing and maintaining sustainable
systems
CM2.7 Capacity to contribute to advancement of technology
a. Appreciation of the evolving nature of technology and its applications

b. Capacity to contribute to the advancement of technology and its adaptation to new
applications or situations
c. Readiness to apply fundamental knowledge to ongoing developments in technology,
and to embrace new technologies relevant to the industry sector or field of application

CM2.8 Understanding of the business environment
a. Introductory knowledge of the conduct and management of engineering enterprises

and of the structure and capabilities of the engineering workforce
b. Appreciation of the commercial, financial and marketing aspects of engineering projects
and programs and the requirements for successful innovation
c. Ability to assess realistically the scope and dimensions of a project or task in the field of
specialisation, as a starting point for estimating costs and scale of effort required
d. Understanding of the need to incorporate cost considerations throughout the design
and execution of a project and to manage within realistic constraints of time and budget
e. General awareness of business principles and appreciation of their significance
CM3 PROFESSIONAL ATTRIBUTES
CM3.1 Ability to communicate effectively, with the engineering team and with the
community at large
a. Fluency in written and spoken English

b. Ability to make effective oral and written presentations to technical and non-technical
audiences
c. Capacity to hear and comprehend others viewpoints as well as convey information
d. Effectiveness in discussion and in presenting arguments clearly and concisely
e. Ability to represent engineering issues and the engineering profession to the broader
community
CM3.2 Ability to manage information and documentation
a. Ability to locate, analyse, catalogue and utilise relevant information, including

proficiency in accessing, systematically searching, analysing and evaluating relevant
publications
b. Ability to assess the accuracy, reliability, and authenticity of information relevant to the
field
c. Ability to produce clear diagrams and engineering sketches
d. Fluency in current computer-based word-processing, spreadsheets, graphics packages
and data communication
e. Ability to maintain a professional journal and records and to produce clear and well-
constructed engineering documents such as progress reports, project reports, reports of
investigations, proposals, designs, briefs, and technical directions
f. Awareness of document identification and control procedures

CM3.3 Capacity for creativity and innovation
a. Readiness to challenge engineering and technological practices from a technical and non
technical viewpoint, to identify opportunities for improvement
b. Ability to apply creative approaches to identify and develop alternative solutions
c. Awareness of other fields of engineering and technology with which interfaces may
develop, and openness to such interactions
d. Propensity to seek information from widest practicable range of sources
e. Readiness to engage in wide-ranging exchanges of ideas, and receptiveness to change
CM3.4 Understanding of professional and ethical responsibilities, and commitment to them
a. Familiarity with Institution of Incorporated Engineers, Sri Lankas Code of Ethics, and any
other compatible codes of ethics relevant to the technology and its areas of application,
and commitment to their tenets
b. Awareness of legislation and statutory requirements relevant to the technology and its
areas of application
c. Familiarity with standards and codes of practice relevant to the technology and its areas
of application
CM3.5 Ability to function effectively as an individual and in multidisciplinary and

multicultural teams with the capacity to be a team leader or manager as well as an
effective team member
a. Manage own time and processes effectively, prioritising competing demands to achieve
personal and team goals and objectives
b. Earn trust and confidence of colleagues through competent and timely completion of
tasks
c. Communicate frequently and effectively with other team members
d. Recognise the value of cultural diversity, develop effective inter cultural skills, and build
network relationships that value and sustain a team ethic
e. Mentor others, and accept mentoring from others, in technical and team issues
f. Demonstrate capacity for initiative and leadership while respecting others agreed roles
CM3.6 Capacity for lifelong learning and professional development
a. Recognise limits to own knowledge and seek advice, or undertake research, to

supplement knowledge and experience
b. Take charge of own learning and development. Understand the need continually to
review own strengths, determine areas for development and undertake appropriate
learning programs
c. Commit to the importance of being part of a professional community: learning from its
knowledge and standards, and contributing to their maintenance and advancement
d. Improve non-engineering knowledge and skills to assist in achieving engineering
outcomes
CM3.7 Professional Attitudes
a. Present a professional image in all circumstances, including relationships with clients,

suppliers and stakeholders as well as professional and technical colleagues
b. Demonstrate intellectual rigour and readiness to tackle new issues in a responsible way
c. Demonstrate a sense of the physical and intellectual dimensions of projects and
programs, and related information requirements, based on reasoning from first
principles and on developing
3.3 Member Self Assessment Chart

Note: Do not include this chart with your submission. It is for your personal use only.
Elements Indicators Achieved Your comments (eg. notes on
when, where and how achieved)
CM1 KNOWLEDGE BASE
CM1.1 Knowledge of science and

engineering fundamentals.
CM1.2 In-depth knowledge and
understanding of the technology
and its applications.
CM1.3 Techniques and
resources.
CM1.4 General Knowledge.
CM2 ENGINEERING ABILITY
CM2.1 Ability to undertake

problem identification,
formulation, and solution.
CM2.2 Ability to apply and adapt
the technology.
CM2.3 Proficiency in design of
equipment or installations
utilising the technology.
CM2.4 Ability to conduct an
engineering project.
CM2.5 Ability to ensure reliable
operation.

Elements Indicators Achieved Your comments (eg. notes on
CM2.6 Responsibility as technical

expert.
CM2.7 Capacity to contribute to
advancement of technology
CM2.8 Understanding of the
business environment
CM3 PROFESSIONAL ATTRIBUTES
CM3.1 Ability to communicate

effectively, with the engineering
team and with the community at
large.
CM3.2 Ability to manage
information and documentation
CM3.3 Capacity for creativity and
innovation.
CM3.4 Understanding of
professional and social
responsibilities, and
commitment to them.
CM3.5 Ability to function
effectively as an individual and in
multidisciplinary and
multicultural teams with the
capacity to be a team leader or
manager as well as an effective
team member.
CM3.6 Capacity for lifelong
learning and professional
development.
CM3.7 Professional Attitudes.

3.4 Associate Member
General Description of Role
Associate Members focus mainly on practical applications. They may be expert in installing, testing and
monitoring equipment and systems, in the operation and maintenance of advanced plant, and in
managing or supervising trade people in these activities. They may be expert in selecting equipment and
components to meet given specifications, and in assembling these to form systems customised to
particular projects.
Associate Members are often required to be closely familiar with Standards and Codes of Practice, and
to become experts in their interpretation and application to a wide variety of situations. Many develop
extensive experience of practical installations, and will be knowledgeable on certain aspects that can
contribute greatly to safety and cost effectiveness in operation. Associate Members often develop
detailed practical knowledge and experience complementing the broader or more theoretical
knowledge of others.
Associate Members need a good grounding in engineering science and the principles underlying their
field of expertise, to ensure that their knowledge and skills are portable across different applications and
situations. Equipment-specific or context-specific training in a particular job are not sufficient to
guarantee generic competency. Given a good knowledge base, however, Associate Members may build
further on this through high levels of training in particular contexts and in relation to particular
equipment. Aircraft maintenance is an excellent example.
The competencies of Associate Members equip them to certify the quality of engineering work and the
condition of equipment and systems in defined circumstances, laid down in recognised standards and
codes of practice. Such certification should be fully acceptable in the public domain and should not
require further endorsement by other practitioners perceived to be more qualified.
Associate Members may lead or manage teams appropriate to these activities. Some may establish their
own companies or may move into management roles in engineering and related enterprises.
3.5 Associate Member

Units, Elements and Indicators of Competency
Units are numbered AM1, AM2 etc. Elements are numbered AM1.1, AM1.2 etc. Indicators are denoted
by a, b, c etc.
AM1 KNOWLEDGE BASE
AM1.1 Knowledge of science and engineering fundamentals
It is essential for Associate Members to have a fundamental knowledge that ensures portability of their
skills across different operating environments.

a. Knowledge of mathematics sufficient to understand from an analytical viewpoint the physical
phenomena relevant to the field of engineering and to the technologies commonly employed,
and the functioning and limitations of relevant plant and equipment; and to solve problems
commonly encountered in the field.
b. Knowledge in the physical sciences, life sciences and information sciences sufficient to
understand situations addressed by the field of engineering and the functioning and limitations
of relevant plant and equipment.
c. Sound basic knowledge of the engineering sciences that support the field of engineering and the
technologies employed, and ability to apply this knowledge in normally-encountered situations;
awareness of the further scope of relevant engineering sciences.
d. Knowledge of the properties of materials commonly used in the field of engineering
e. Analytical skills sufficient to understand and quantify operating situations and to recognise
when they may exceed the limits of accepted procedures.
f. Appreciation of the future need to apply fundamental knowledge to ongoing developments in

the field of engineering and to new technologies relevant to the field.
AM1.2 Knowledge and understanding of engineering and technology
a. Sound knowledge and understanding of the functioning, performance and operating

characteristics of plant and equipment used in the field of engineering.
b. Ability to apply analytical techniques and knowledge of engineering science to quantify

requirements, and to the specification of equipment and materials (where appropriate,
including software) to perform satisfactorily in particular situations.
c. Competence in applying mathematics, science and engineering science to the solution of

problems and situations routinely encountered in the field of engineering.
d. Awareness of current technical and professional practice, critical issues, and the current state of
developments in the field of engineering.
e. Ability to relate changing practices to existing knowledge and to question apparent departures
from established principles.
f. Understanding of how new developments in the field of engineering relate to established theory
and practice, and to other technical areas with which they may interact.

AM1.3 Techniques and resources
a. Awareness of standard design practices and tools currently used in the field, particularly
computer based tools and packages, and competence in their use.
b. Proficiency in laboratory and testing procedures relevant to the field, and strong grasp of
principles and practices of laboratory safety.
c. Ability to calibrate and use measuring instruments, conduct relevant measurements and tests,
analyse and interpret data and form reliable conclusions.
d. Knowledge of common sources of error and their avoidance: ability to recognise known sources
of error, eliminates or compensate for them where possible, and quantify their significance to
results and conclusions drawn.
e. Ability to construct and test representative components or sub-systems in a laboratory testing.
AM1.4 General Knowledge
a. General knowledge necessary to appreciate the place of engineering and technology in society.
AM2 ENGINEERING ABILITY
AM2.1 Application of standards and codes of practice
a. Thorough understanding of the standards and codes of practice relating to the field of
engineering and appreciation of their range of applicability.
b. Ability and commitment to apply the relevant standards and codes in all work undertaken.
c. Ability to inspect engineering work or installations that are subjected to recognised standards
and codes, detect shortcomings and verify compliance or otherwise, and specify remedial
action.
AM2.2 Specifying and installing systems
a. Ability to select and combine available components to form systems meeting given
specifications:
Understand and document the clients functional requirements.
Analyse the functional requirements and develop a performance specification.
Confirm that the specification can be met by standard components and equipment in
compliance with applicable standards and codes of practice.

Select, specify and document the system including all necessary equipment,
components and software.
Where possible, supervise installation of the system; or construct a prototype system
Conduct all required tests to confirm satisfactory operation.
Document operating procedures.
AM2.3 Design procedures
a. Ability to utilise standard design practices, including advanced software or other design aids, to
perform detailed design of components and/or systems.
b. Ability to perceive unexpected or inconsistent results of the design process, takes corrective
action, and brings persistent problems to attention.
AM2.4 Assessing technical and policy options
a. Ability to undertake feasibility studies for prototype development; upgrading, extension or

replacement of plant or equipment; procurement of new equipment; new operational
procedures etc:
Understand and document the objectives.
Formulate performance measures including functionality, maintainability, safety,

sustainability, user impact, training requirements, and cost-effectiveness.
Consult technical and other literature to identify available options
Evaluate options and quantify or rank each against the performance measures.
Recommend and justify preferred option
Produce clear and concise report of the investigation, comprehensible to both technical
and non-technical readers.
AM2.5 Observation, analysis and testing
a. Ability to conduct expert analysis and testing of materials or processes using agreed procedures,
calibrate test instruments and processes, record data, and provide advice on properties,
condition, or satisfactory operation.
b. Ability to critically observe, test and record progress of construction, assembly and
commissioning of engineering work.

AM2.6 Operations and maintenance
a. Ability to supervise and monitor the operation of complex plant, verifies satisfactory and safe
operation according to agreed standards, detect and interpret unusual circumstances and bring
these to attention.
b. Ability to conduct condition monitoring and maintenance programs in accordance with agreed
standards and procedures, diagnose faults or incipient faults, and propose and/or undertake
remedial action.
c. Ability to investigate technical malfunctions and their causes, or deviations from normal
performance, and propose and/or undertake remedial action.
AM 2.7 Specific training
Candidates whose background has included advanced equipment/process -specific training:
a. Evidence of having applied above training in a situation of responsibility and/or taken

responsibility for certifying satisfactory condition or operation.
Candidates from mainly educational background:
a. Appreciation of the likely need to undertake advanced training in specific equipment or

procedures and take responsibility for their condition or operation.
AM2.8 Responsibility as technical expert
a. Ability to communicate the significance of a technical issue to other technical and non-technical
stakeholders in a project or program.
b. Ability to identify, assess, communicate and manage technical risk in area of expertise
c. Appreciate the interactions between technical systems and the social, cultural, environmental,
economic and political context in which they operate
d. Appreciate the imperatives of safety and of sustainability, and approaches to developing and
maintaining safe and sustainable systems
AM2.9 Understanding of the business environment
a. Introductory knowledge of the conduct and management of engineering enterprises and of the
structure and capabilities of the engineering workforce.
b. Appreciation of the commercial, financial and marketing aspects of engineering projects and
programs and the requirements for successful innovation.

c. Understanding of the need to incorporate cost considerations throughout the design and
execution of a project and to manage within realistic constraints of time and budget.
d. General awareness of business principles and appreciation of their significance.
AM3 PROFESSIONAL ATTRIBUTES
AM3.1 Ability to communicate effectively, with the engineering team and with the community at
large
a. Fluency in written and spoken English.
b. Ability to make clear oral and written presentations of technical and non-technical audiences.
c. Capacity to hear and comprehend others viewpoints as well as convey information.
d. Effectiveness in discussion and in presenting arguments clearly and concisely.
e. Ability to represent engineering issues and the engineering profession to the general public.
AM3.2 Ability to manage information and documentation
a. Ability to locate, analyse, catalogue and utilise relevant information including proficiency in
accessing, searching, and evaluating relevant publications.
b. Ability to gauge the accuracy, reliability and authenticity of information.
c. Ability to produce clear diagrams and engineering sketches.
d. Fluency in current computer-based word-processing and graphics packages.
e. Ability to maintain records and to produce clear engineering documents such as progress
reports, project reports, reports of investigations, proposals, designs, and technical directions.
f. Awareness of document identification and control procedures.
AM3.3 Capacity for creativity and innovation
a. Readiness to challenge engineering and technological practices from a technical and non
technical viewpoint, to identify opportunities for improvement.
b. Readiness to apply creative approaches to identify and develop alternative solutions.
c. Awareness of other fields of engineering and technology with which interfaces may develop,
and openness to such interactions.
d. Propensity to seek information from widest practicable range of sources.

e. Readiness to engage in wide-ranging exchanges of ideas, and receptiveness to change.
AM3.4 Understanding of professional and social responsibilities, and commitment to them
a. Familiarity with IIESL Code of ethics, and any other compatible codes of ethics relevant to the
field of engineering, and commitment to their tenets.
b. Awareness of legislation and statutory requirements relevant to the field of engineering.
c. Familiarity with standards and codes of practice relevant to the field of engineering
AM3.5 Ability to function effectively as an individual and in multidisciplinary and multicultural teams,
as a team leader or manager as well as an effective team member
a. Manage own time and processes effectively, prioritising competing demands to achieve
personal and team goals and objectives.
b. Earn trust and confidence of colleagues through competent and timely completion of tasks
c. Communicate continuously and effectively with other team members.
d. Recognise the value of cultural diversity, develop effective intercultural skills, and build network
relationships that value and sustain a team ethic.
e. Mentor others, and accept mentoring from others, in technical and team issues.
f. Demonstrate capacity for initiative and leadership while respecting others agreed roles.
AM3.6 Capacity for lifelong learning and professional development
a. Recognise limits to own knowledge and seek advice, or undertake research, to supplement
knowledge and experience.
b. Take charge of own learning and development. Understand the need continually to review own
strengths, determine areas for development and undertake appropriate learning programs.
c. Commit to the importance of being part of a professional community: learning from its
knowledge and standards, and contributing to their maintenance and advancement.
d. Improve non-engineering knowledge and skills to assist in achieving engineering outcomes.
AM3.7 Professional Attitudes
a. Present a professional image in all circumstances, including relationships with all stakeholders
such as clients, suppliers and professional colleagues.

b. Demonstrate appreciation of the evolving nature of engineering and technology, and readiness
to tackle new issues in a responsible way.
c. Demonstrate readiness to apply fundamental knowledge to ongoing developments in

engineering and technology, and to embrace new technologies relevant to the industry sector or
field of application.
d. Demonstrate a sense of the dimensions and level of challenge of projects and programs, and
related information requirements, based on reasoning from first principles and on developing
experience
3.6 Associate Member Self Assessment Chart

Note: Do not include this chart with your submission. It is for your personal use only.
Elements Indicators achieved Your comments (eg. notes on

AM1 KNOWLEDGE BASE
AM1.1 Knowledge of science and
engineering fundamentals.
AM1.2 In-depth knowledge and
understanding of the technology
and its applications.
AM1.3 Techniques and resources.
AM1.4 General Knowledge.
AM2 ENGINEERING ABILITY
AM2.1 Application of standards
and codes of practice
AM2.2 Specifying and installing
systems
AM2.3 Design procedures
AM2.4 Assessing technical and
policy options
AM2.5 Observation, analysis and
testing
AM2.6 Operations and
maintenance

Elements Indicators achieved Your comments (eg. notes on
AM2.7 Specific training
AM2.8 Responsibility as technical
expert
AM2.9 Understanding of the
business environment
AM3 PROFESSIONAL ATTRIBUTES
AM3.1 Ability to communicate
effectively, with the engineering
team and with the community at
large.
AM3.2 Ability to manage
information and documentation
AM3.3 Capacity for creativity and
innovation.
AM3.4 Understanding of
professional and social
responsibilities, and commitment
to them.
AM3.5 Ability to function
effectively as an individual and in
multidisciplinary and multicultural
teams with the capacity to be a
team leader or manager as well as
an effective team member.
AM3.6 Capacity for lifelong
learning and professional
development.
AM3.7 Professional Attitudes.

4. Section D
Continuing Professional Development

Record

Continuing Professional Development Record

Name of the Applicant:
Srl Period No of Name of the CPD event CPD Provider Relevant

No Hours Competency Unit
From To
I certify that I have attended the CPD events as referred above and that the details set out above are accurate. I also certify that I have
maintained the CPD records/notes/certificates and will be available to present the Institution of Incorporated Engineers Sri Lanka if requested.
Signature Date:
5. SECTION E
Compiling a Submission

5.1 Steps in preparing a Submission
Complete Application Form
Assemble certified copies of

Academic certificate(s) and
Associated academic transcript(s)
Cover page
Second page
Prepare Curriculum Vitae as

per IESL format
CDR
Identify and prepare relevant
Continuing professional
Development record
Write Career Episode(s)
Prepare summary statement
Submit all specified documentation to IIESL for assessment

5.2 Complete Application form
You must first complete the Application Form accurately.
5.3 Certified Copies of Qualifications and Academic Record(s)

You must provide certified true copies of your original diploma and any other subsequent engineering
qualifications together with their associated academic transcripts. For each qualification you must
provide a certified copy of the academic qualification and the academic transcript (list of subjects
studied and results obtained).
5.4 Certification of Documents:

Many applications for assessment are delayed because documents are not properly certified. The
assessors will contact you by letter or email if there are any omissions in regard to certification. Please
make sure your email and contact addresses are up to date.
Applicants should note the instruction given in Section A concerning certification of documents:
5.5 Components of the CDR
5.5.1 Introduction
This section deals with the compilation of a Competency Demonstration Report (CDR) describing your
engineering practice. Do not proceed with this section unless you have completed the self-assessment in
Section B and believe that you have demonstrated all of the relevant competency elements in your
engineering education and/or workplace practice. The purpose of the CDR is to demonstrate:
1. how you have applied your engineering knowledge and skills;
2. that such applications meet the competency standards of the relevant membership category of
IIESL
You should note that the CDR must be all your own work. You must carefully follow the instructions
provided in preparing your CDR. You should realise that you are entering into a final assessment. The
major assessable features of the CDR are your narratives written in English of three Career Episodes and
a Summary Statement of the competency elements you have claimed.
You should type your CDR using a word processor and remember to keep a copy. The CDR must be
bound A4 format. The CDR should be typed in size 12 Calibri font with 1.5 spacing and submit in
three copies. Documents not meeting the above standards will be returned for resubmission.

Your CDR will be assessed against the competency standards of the membership category specified by
you. IIESL will not assess your competencies against a membership category higher than the one you have
specified.
5.5.2 Cover Page

Your Competency Demonstration Report must have a cover page consisting following;
Title; Competency Demonstration Report
Purpose; submitted for acquiring membership ( Associate Member /Member ) of the

Name; Name with initials
Date; YYYY/MM/DD
5.5.3 Second Page:

Second page must have a standard passport size photo, your full name together with your sworn
declaration (shown below).
Declaration:
The following declaration must be signed and presented on the Second page:
All statements of fact in this report are true and correct and I have made claims of acquired
competencies in good faith. The report is my own work and is a true representation of my personal
competence in written English. I confirm that I understand that members of the Institution of
Incorporated Engineers, Sri Lanka are required to display a commitment to exercising professional and
ethical responsibility in all aspects of their work.
Printed Name:
Signature:
Date:
Please Note: A submitted CDR which is incomplete when submitted or which does not meet the stated
requirements will not be assessed.
All submitted material becomes the property of IIESL. Applicants must make copies of all documents
sent to IIESL. Applicants who request photocopies and return of documents will be charged an
administration fee.

5.5.4 Curriculum Vitae (CV)
To gain a full perspective of your engineering workplace practice, IIESL requires a summary of your
employment history from graduation to date.
For each workplace provide;
organisation name and location including contact details where possible
dates and duration of employment clearly indicating number of years with the organisation.
title of position occupied by you
your defined role (provide a duty statement where available) and/or a brief description of your
activities
documentary evidence must be provided if you have relevant work experience. (Attach certified
copies of employment reference letters)
chronological order should be maintained. One record of an experience should not overlap with
another.
Your CV should be no more than three A4 pages excluding attachments of Employer reference letters.
5.5.5 Identification of Continuing Professional Development

A brief summary of the Continuing Professional Development (CPD) you have undertaken during the
three years preceding your application for assessment must be included in your CDR. This CPD may take
the form of;
Short courses you have attended.
Formal Post - graduate study
Conferences at which you have delivered papers or attended.
CPD programmes conducted by any other professional organization/institution.
This should be no more than one A4 page. The format required is provided in Section D of this Guideline.

5.5.6 Writing Your Career Episode (CE)
You are required to present a narrative utilizing three of your career episodes to demonstrate your
competences required for the eligibility of applied membership category.
A career episode is a documented component of your engineering education and/or work experience
which captures a particular period or distinct aspect of your engineering activity. It may be;
an engineering task undertaken as part of your educational program.
a project you have worked on or are currently working on.
a specific position that you occupied or currently occupy.
a particular engineering problem that you were required to solve.
Each narrative must be in your own words (a minimum of 1000 words for each narrative) and must be
written in English. The narrative, being written in your own words, will also provide evidence to the
examiners to assess your communication skills.
The narrative should be written in a spontaneous way and not be artificially constructed around the
competencies specified in the charts in Section C. Each narrative should emphasize any engineering
problems identified and any particular problem solving techniques used by you. The purpose of this is to
assess the nature of the contribution which you may have made to the engineering project or task -
particularly if that contribution was of a novel nature or critical to the implementation of the
task/project.
Please note that it is not sufficient to merely describe work in which you were involved. Your own role in
the work must be clearly described by you, and be identifiable in the assessment.
Career Episodes must be written in the first person singular clearly indicating your own personal role in
the work described. Remember, it is what I did, not what we did or what I was involved in.
You must number each paragraph in each of your career episodes. This is necessary to construct the
Summary Statement. Each narrative should follow the format shown below:

a) Introduction
This introduces the reader to the narrative and should include such things as;
the chronology - the dates and duration of the Career Episode.
the geographical location where the experience was gained.
the name of the organisation.
the title of the position occupied by you.
This section would be about 50 words.
b) Background
This sets the scene and provides the context in which you were studying/working. It should include such
things as;
the nature of the overall engineering project.
the objectives of the project.
the nature of your particular work area.
a chart of the organisational structure highlighting your position.
a statement of your duties (provide an official duty statement where available).
This section would be about 200 - 500 words.
c) Personal Workplace Activity

This is the body of the narrative and the key assessable component. In this section you must describe in
detail the actual work performed by you. It is not sufficient to describe the work performed by a team or
group your own role must be clearly identified. Remember it is your personal engineering
competencies that are being assessed.
This section should include such things as;
technical details of the work.
how you applied your engineering knowledge and skills.
the tasks delegated to you and how you went about accomplishing them.
any particular technical difficulties/problems you encountered and how you solved them.
strategies devised by you including any original or creative design work.

how you worked with other team members.
d) Summary
This section sums up your impressions of the work and your role in it. It should include such things as;
your view of the overall project.
how the project fared in meeting the goals/requirements.
how your personal role contributed to the project.
5.5.7 Preparation of the Summary Statement

Complete the narratives (1-3), then analyse them for the presence of the competency elements of the
relevant membership category.
The results of your analysis are reported in the form of a Summary Statement of competency elements
claimed. The Summary Statement cross-references the relevant set of competency elements with the
particular paragraph in your Career Episode where each element occurs. Summary Statement must
address all competency elements.
The Summary Statement must be presented in the form of a table identifying each competency element
claimed, and indicating how and where it was applied.
The numbering of the paragraphs in each Career Episode will allow you to construct the Summary
Statement table by identifying the exact location in the narrative where evidence for the particular
competency element can be found. eg. Paragraph 4 in Career Episode 1 would be CE 1.4.
The required format for the Summary Statement is shown below:
Summary Statement of Competencies Claimed
Competency element How and where demonstrated Paragraph reference in Career

Episode (CE)
eg. CM 1.3 or AM 1.3 A brief description of how achievement Identify relevant paragraph(s)
of the element is demonstrated and where application of the
where the (site/situation) applied to you element is demonstrated e.g.
CE 1.4, CE 3.6, CE 2.11

Note:
Do not address the indicators. Assessment is made on a holistic basis and it is not expected that every
indicator will be met.
5.6 Assessment of the CDR

Your CDR will be assessed to determine the presence of the competencies for the relevant membership
category. If it is found that the competencies you have demonstrated, meet the IIESL competency
standards you will be notified in writing to appear for a viva-voce in which your Career Episodes will be
orally questioned and assessed.
Assessment of the applications will be based on competency requirements required for the year of
application which is given in Annexure to the Section C, which will be revised each year by the Council
of IIESL assessing the degree of demonstration of competencies in the previous year.
IIESL assessing the degree of demonstration of competencies in the previous year.

6. Section F
Check List

6.1 Check List of Documentation
Before you dispatch your submission, you should use this check list to ensure that you have completed
all the necessary steps and provided all the required documents. Assemble your submission by placing
documents in the order shown below. Do not bind all the documents together only CDR should be
bound with Spiral binding.
Completed Application Form
Confirmation of payment for assessing
Identification document ( passport / national identity card issued by the country of citizenship)
Certified true copies of academic certificates
Certified true copies of academic transcript(s)
CDR
- Cover Page,
- Second page with full name, Passport style photo and signed declaration
- Curriculum Vitae
- Employer reference letter(s)
- CPD - Continuing Professional Development record
- Career Episode(s)
- Summary Statement of evidence for the competency elements
Note: CDR assessments may take up to 10 weeks from the date of receipt. Please DO NOT contact IIESL
within that time frame. Contact will cause delays to all applicants.

7. Annexure to section C

7.1 Annexure 1 - Competency Standards Applicable for Year
2010 (Approved by the Council of IIESL)
Member
The candidates should demonstrate at least two of the key competency Units of CM1
KNOWLEDGE BASE, CM2 ENGINEERING ABILITY and CM3 PROFESSIONAL ATTRIBUTES
including 50 % of the competency elements in each Unit. Altogether the candidate should
demonstrate 50 indicators using 3 Career Episodes.
Associate Member
The candidates should demonstrate at least two of the key competency Units of AM1 KNOWLEDGE
BASE, AM2 ENGINEERING ABILITY and AM3 PROFESSIONAL ATTRIBUTES including 50 % of the
competency elements in each Unit. Altogether the candidate should be able to demonstrate 20
indicators during the viva.

This Specimen Membership Application Form could be downloaded from website www.iie.lk
7.2 Annexure 2 - Membership Application Form FORM NO: IIESL/MEM/01

INSTITUTION OF INCORPORATED ENGINEERS, SRI LANKA
ESTABLISHED IN 1977, INCORPORATED BY ACT OF PARLIAMENT (ACT NO: 64 OF 1992 & AMENDED BY ACT NO: 11 OF
2000) OF DEMOCRATIC SOCIALIST REPUBLIC OF SRI LANKA
12/2 B, Galle Road, Moratuwa, Sri Lanka Tele: 0112611430 / 0112638633
Stamp size
Fax: 0112637026 E - mail : iie@sltnet.lk web site : www.iie.lk
(2.5 x 3.5 cm)
APPLICATION TO MEMBERSHIP Photograph
(THIS FORM SHOULD BE FILLED IN BLOCK CAPITALS) paste here
SECTION 1: PERSONAL DATA ABOUT THE CANDIDATE
1.1 Full Name (Surname First) Mr. / Miss / Mrs. / Ms. / .
1.2 Permanent Address
Tel Mobile Email
1.3 Official Address
Tel Fax Email
1.4 Preferred Mailing 1.5 Sex M F 1.6 Civil Status 1.7 National Identity Card Number
Address 1.2 1.3 Single Married
1.8 Date of Birth 1.9 Age 1.10 Class of Membership Applied for
Years Companion Student Associate
Y Y Y Y M M D D Associate Member Member
SECTION 2: DETAILS OF EDUCATION

2.1 General Education
From To School Attended Highest Educational Level Reached
Year Month Year Month
2.2 Engineering Education

From To Institution Course of Study Field of Engineering
2.3 In-plant Training (if applicable) / or any other special training in lieu of In-plant Training
From To Place/ Establishment Nature of Training
SECTION 3: DETAILS OF EXPERIENCE

From To Institution / Establishment Nature of Work Designation
(If the space provided is inadequate, a separate sheet may be

SECTION 4: CONTINUING PROFESSIONAL DEVELOPMENT RECORD
Is the record attached? Yes No
SECTION 5: DECLARATION BY THE CANDIDATE
I hereby certify that the particulars in this application and related documents furnished by me are true and
correct. I
am aware that if the particulars contained herein or the related documents are found to be false or incorrect, I
am liable to be disqualified before the election to the applied class of membership and for cessation after the
election
Date: at any instant.
. Signature of the Candidate:
SECTION 6: PROPOSER & SECONDER

We the undersigned having read and understood the stipulated conditions for eligibility of each Class of Membership
have certified and initialed all documents submitted by the Applicant and propose and
second as a person worthy of the distinction in every respect of being elected
a .. of the Institution.
PROPOSER
Name in Block Capitals
Full Signature Initials
Membership Number Y Y Y Y D D M M
SECONDER
Name in Block Capitals
Full Signature Initials
Membership Number Y Y Y Y M M D D
SECTION: 7: FOR OFFICE USE ONLY (To be filled by the Executive Secretary)
(This section should not be filled by the Applicant)
(a) Date of receiving the Application & Registration Fee
Application Index No
Y Y Y Y M M D D
Registration Fee Amount LKR Receipt No
Y Y Y Y M M D D
Originals of all the certificates were duly checked. The copies of the certificates submitted by the applicant
are correct.

Executive Secretary Date
(To be filled by the Chairman, Membership Committee)
(c) Date of appearance for the Competency Based Professional Review .
(d) Recommended for the election to ..

(Class of Membership)
(e) Date of payments Members Subscription:
Amount LKR Receipt No
Y Y Y Y M M D D
(f) Membership Number Allotted
Recommended by ..
Chairman, Membership Committee Date
Approved by the Council of Management
..
President Hony Secretary Council Decision Number Date
7.3 Annexure 3 CV
Generally, your curriculum vitae (C.V.) is the first contact you may have with a prospective
client. Therefore, you would surely want a C.V. that does more than simply impart information
about your personal history, and educational and professional qualifications and
achievements. Strive for a CV that establishes a favorable image of your professionalism in the
mind of the reader. It should emphasize your areas of strength and create an interest about
you sufficient to result in a personal interview. Make your C.V. work for you!
Note: - There are several phases in creating an effective C.V.
1. Compile all potentially useful information and organize those items under appropriate
categories. Be sure the information you choose clearly communicates a sense of
professionalism, competence, and enthusiasm.
2. Select only the most pertinent information. Keep the level of information concise and,
at the same time, as comprehensive as possible. Bear in mind that your C.V. is your
"advertisement" for an interview!
3. Finally - review and revise the document. As important as the information provided,
your C.V. should be edited for proper grammar, correct spelling and appropriate
punctuation. To further convey your professional image to the reader, use quality paper,
ink, and equipment. Inferior materials or illegible photocopies say to the reader, "You
are not important to me."
Main Points in a C.V
1. Contact Information
This information is always located at the top of the first page. It should include your
name (avoid nicknames), address, telephone and other contact numbers (fax, e-mail).
Be sure to spell out words like Street, Avenue, North, etc.
If your current address is not your permanent address, indicate your current-address

information under a heading marked "Present", followed by your permanent-address
information under a heading marked "Permanent."
2. Personal Data
This is a professional document, so disclosure of information regarding age, marital
status, children, and health is a matter of choice. Some recipients expect this
information, and it is a common practice to provide it.
3. Educational Background
The information in this section is usually given with the most recent training listed first.
The order in which you present this information is your choice be it date first,
diploma/degree first, or perhaps institution first. Whichever your preference, keep your
entries consistent.
4. Employment Experience
Begin by separating your part-time employment entries from your full-time employment
entries, and list them under appropriate subheadings. This avoids any misunderstanding
by the reader. The list of your employment experience generally starts with your current
employment. Be sure to provide the date of your employment, your job title, and your
employers name and address. You may choose to include major duties, successes and
achievements, research interests, committee assignments, etc. It is important, however,
to keep all entries uniform. Avoid providing a lot of information on your recent entries,
but giving less information on later entries.
A subheading for certification or license status may be included at the end of this
section. Indicate certificate/license numbers and the dates issued.
5. Professional Affiliations and Honors
This section should include your current membership in professional organizations.

Include any significant appointments and/or elections to positions or committees,
indicating the appropriate date for each position listed. Indicate any significant activities
completed under your leadership. Honors from professional, educational or related
organizations should also be shown under this section. Keep your comments brief in
describing these items. This will avoid the risk of creating an unfavorable impression of
exaggeration on your part.

6. Publications, Presentations, and Other Activities
This is an area considered to be the perfect opportunity to list your professional
accomplishments. The following subheadings may be listed in this section: publications,
presentations, invited lectures, abstracts, research activities, community service, and
leisure interests, to name a few. When listing your publications, give full bibliographic
entries so the reader can easily find them.
7. References
Place this information at the end of your document. Include the following information in
each entry: name, position, address, and telephone number, and e-mail if possible.
IMPORTANT POINTS TO CONSIDER

The information and advice given are no guarantee that your C.V. will open all doors for
you. It offers a start in preparing an effective document - one that shows clarity,
consistency, and an organized format. Your C.V. should be easy to read, leaving no
confusion in the readers mind as to what is presented. Here are some points that will
help you produce a document with impact.
1. Your C.V. will be read by people who do not know you, so you must present your
information in the clearest, most concise fashion possible. These people will be
responsible for developing a list of recommended candidates, probably in a limited
amount of time, so your document must be precise and specific at the first reading.
2. Accurate presentation of your qualifications is imperative. Be specific - for instance,

under:
Educational Background - include your major, year degree was received, name of
diploma/degree, complete name of institution (no abbreviations) and its location.
Employment History - leave NO gaps in the total number of years worked (account for
every year); distinguish between part-time and full-time work; use separate headings
for entries such as: military service, volunteer activities, leave of absence (explain).
Professional Activities - cite current memberships; clearly date all former activities and
memberships.

Publications - clarify your role in group efforts; distinguish between refereed and non
refereed articles; use separate headings for different types of publications (journal
articles, books, chapters in books, abstracts, etc.)
3. Consistency is crucial. It reflects good organization and appearance and is vital to fast
readers. Be consistent under all categories of your C.V. Do not provide information in
one entry and fail to do so in other entries within the same category.
4. Do not make double entries. This does not strengthen your C.V. and may be unfavorably
viewed as "padding" by the reader.
5. Stay chronologically consistent when presenting information. If you elect to present the
most current information first, stay with that order through all sections. This makes your
document easier to read and avoids confusion on the part of the reader.
6. There is no magic number for the maximum number of pages considered ideal for an
effective C.V. However, it is generally accepted that a two-to-four page C.V. should
communicate the essential background details for a young professional.
7. It bears repeating - be clear, consistent and organized. If your C.V. is hard to read or an
entry projects a suspicious aura, your entire document may be discounted or even
rejected.
8. It is helpful to have the final version of your document proofread by:
a) A professional friend who knows you (able to spot significant information left out or is
confusing as presented).
b) A professional who does not know you (able to read your C.V. critically as a person
learning about you for the first time - a status similar to your eventual readers).
c) A personnel officer, dean, or department head (experienced in reviewing this kind of
material).
9. Print your C.V. on standard 8 1/2" x 11" white paper (A4 Sheet) not exceeding 4 pages
in Font 11 Calibri; print on one side only; be sure the print on all copies is clear and easy
to read; all pages should be clean of smudges and streaks. A single staple in the upper
left-hand corner is a simple and sufficient method for securing the pages. You could
add a photo of yourself - either scanned in by computer, or stuck on. But make sure it is
a good one.
Individuals are faced with many choices when writing a C.V. The methods used to develop this
document are varied, but the goal is the same - a curriculum vitae that will impress and
convince the reader that you are the person they seek. The advice offered here will help you to
develop that kind of C.V. Best wishes for success in all your endeavors.
The following is a Sample Format of a C.V.

Curriculum Vitae (CV)

(Should not exceed 5 A4 pages in Font 11 Calibri)
Date of the CV : year /months /date
1. Contact Information
Name: Mr./Mrs/Miss Nimal Gamini Wijesinghe (avoid nicknames)
Present Address:
Permanent Address:
Contact Numbers:
Office Phone: +94xxxxxxxxx.

Home: +94xxxxxxxxxxxx.
Mobile: +94 7XXXXXXXXX.
Fax N0: +94xxxxxxxxxxxxxx
Email No: nimalwije123@email.com (MUST PROVIDE)
2. Personal details
Age:
Marital Status:
Nationality:
Date of Birth:
National Identity Card No:
Ability in other languages:
Computing experience:
3. Educational Background
Diploma:National Diploma in Technology, University of Moratuwa, Sri Lanka - 1975

Other Diplomas:
Degree/ Graduate:
Master: MBA, University of Sri Jayewardenepura, Sri Lanka.
4. Professional Experience and Significant Achievements

(Present employment first and then previous employments in chronological order)

PROJECT ENGINEER
Name of the Employer - Company A Present
Responsible for the renovation and refurbishment of both buildings and engineering services, including
the construction of new facilities and the expansion of building services infrastructure. Most of the
above projects are in excess of SLR 10 million with a total annual budget of approximately SLR 450
million. I conducted direct supervision of onsite contractors, chairing meetings, contract evaluation and
award.
Assisting in the in development and expansion of the existing hospital infrastructure and
improving engineering facilities.
Liaising between both the internal and external stakeholders.
Contributing to strategy formulation and forward planning as a member of the management
team.
Initiating the project, defining project scope and preparing the project plan.
Writing technical specifications and overseeing production of conceptual drawings,
preliminary design criteria for project including Scope of Work, Work Breakdown Structure and
general specification, milestone identification and planning (macro-level). Maintaining change
controls.
Identifying service needs, solving engineering problems relating to the continuous expansion of
the hospital.
Providing efficient and reliable buildings and engineering services for both patients and staff.
Establishing Planned and Preventive Maintenance PPM programs and procedures after project
closure.
Identifying and matching needs to approved budget with project stakeholders.
Identifying ongoing project risks and assigning and mitigating risks.
Reporting project status at progress meetings.
Ensuring all resources (manpower and materials), are provided as per the contractors
scheduled plan, meet all KPIs, and SLAs on time and within budget.
BUILDING SERVICE ENGINEER
Name of the Employer: Company B
Period of Employment From May 1993 To November 2003

Day-to-day operation and maintenance of all mechanical plant such as:
medical gas systems,

compressed air and vacuum pumps,

boilers and associated steam and condense systems,
air cooled chillers,
standby diesel generators,
laundry/kitchen equipment,
incinerators,
Autoclaves and building services;
heating and ventilation,
sanitation, sewage, potable water treatment plants,
Water distribution and electrical services.
ASSISTANT BUILDING SERVICE ENGINEER
Name of the Employer: Company C

Period of Employment From May 1990 To April 1993
Main description of work
Type of works
Type of works
Type of works
MAINTENANCE SUPERINTENDANT
Name of the Employer: Company D

Period of Employment- From May 1986 To April 1990
Employed in 4 different classes of ship which gave a broad base of experience from aero derived
gas turbines to steam driven propulsion systems.
Main involvement was on the operation and maintenance of main and auxiliary equipment
associated with a large marine power plant.
Applied multi-skilled, general engineering and workshops practice, ensured efficient operations
to technical level. Experience encompasses working on a variety of vessels worldwide and
varying classes of propulsion systems. No diesel engines for propulsion Mike only boilers and
gas turbines.
Responsible for the routine and ad hoc maintenance duties plus the smooth, efficient
running of the engine room and deck machinery, including boilers, pumps, compressors, air
conditioning and refrigeration plant Including generators, M/E injection equipment and diesel
engines. In charge of generators, purifiers, compressors, fuel transfer, engineering watches,
maintenance of main engine and auxiliary machinery.

5.Professional Affiliations and Honors
Registered with City and Guilds London- 2005

Associate Member of Institution of Incorporated Engineers, Sri Lanka.
6. Key Performing Areas

(eg. Quantity Surveying, Civil Engineering Construction, Production Engineering etc)
7. Areas of Expertise
Project Management
Trouble shooting problem solving
Strategic Planning
Manpower and Materials Planning
General Management
Contract Negotiations
Staff & Team Development
Project Finance
Team Leadership
Health and Safety
Change Controls
Total Quality
Wide range of computer software including AutoCAD, MS Project, MS Word, Excel, Power Point
and other specialty software.
Others please specify
8. Professional Training
Non Destructive Testing -Atomic Energy Authority, Sri Lanka ,2007
..
..
..
9.Publications, Presentations, and Other Activities
List your professional accomplishments under following subheadings.

a. Publications,(When listing your Publications, give full bibliographic entries)
b. Presentations,
c. Invited lectures,
d. Abstracts,
e. Research Activities,
f. Community Service, And
g. Leisure interests etc.
10. References
In each entry: name, position, address, and telephone number, and e-mail if possible.
1. Name
Position
Address
Telephone Number
E Mail
A Brief statement of how the person is relevant to your employment/experience
2. Name
Position
Address
Telephone Number
E Mail
A Brief statement of how the person is relevant to your employment/experience
Signature:
Date:

IIESl Membership Guideline PDF

Uploaded by

Copyright:

Available Formats

IIESl Membership Guideline PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

IIESl Membership Guideline PDF

Uploaded by

Copyright:

Available Formats

INSTITUTION

INSTITUTION OFOF INCORPORATED

1 2 / 2 B ,[ 1G2A/L2LBE , RGOAAL LDE, RMOOA R

Guidelines for Submission of Applications

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 2

These competencies correspond to completion of a 3-year Engineering Diploma or equivalent

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 3

4 Section D Continuing Professional Development Record (CPD) 31

6 Section F Check List of Documentation 42

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 4

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 1

NON CORPORATE MEMBERS: Honorary Fellows

Honorary Fellow - Hon. FIIESL

The Abbreviations stand for the following:

Hon.FIIESL - Honorary Fellow of the Institution of Incorporated Engineers, Sri Lanka

in the Register of Institution of Incorporated Engineers, Sri Lanka (IIESL).

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 2

Focuses on interactions within the system

Modifies and adapts established engineering practices

Advances engineering technology.

The Associate Member:

Focuses on specific elements of the system

Works within codes and applies established practices and procedures.

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 3

1.2 Pathways to Recognition

1.3 Accredited Sri Lankan Qualifications

National Diploma in Technology (NDT) Institute of Technology, University of Moratuwa,

Any other qualifications or reciprocal programme accredited by the Council of Management of

1.4 Accredited Overseas Qualifications

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 4

1.5 Competency Demonstration

1. Submission of Competency Demonstration Report (CDR)

2. Professional Review - Professional Review (PR) process will consist of e v a l u a t i o n o f

1.6 Certification of Copies of Documents

Applicants should note the following points concerning certification of documents:

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 5

(a) the signature of the person certifying the document

The following classes of persons are authorised to certify copies of documents:

A current corporate member of Institution of Incorporate Engineers. The Membership number

An authorized staff member of IIESL

An officer of Sri Lankan Diplomatic Mission

A Notary Public authorised in the country of application

A Commissioner for Oaths (Declarations) authorised in the country of application

A Solicitor, Barrister or Judge authorised in the country of application

A Justice of the Peace authorised in the country of application

1.7 Steps in the Assessment process

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 6

Section C: Competency Standards & Self-Assessment Charts

Section E: Compilation of a Competency Demonstration Report (CDR)

Section F: Check List of documentation

The assessment fee is specified on the IIESL website (http://www.iie.lk).

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 7

Read Membership Guideline Document

Determine Membership Category applicable to you

Undertake Preliminary Self-Assessment

No Decide whether Yes

Organise additional workplace Prepare Competency

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 8

IIESL- Guidelines for Membership - Council Decision: 2010-11/CM03/011 Page 9