This document summarizes a peripheral pump model CT 61. It is a close-coupled regenerative pump with a single-piece motor casing and wall. It has a cast iron or bronze casing and is protected against water entering the motor. It is suitable for clean liquids up to 60°C and can increase network pressure. The pump has an induction motor that runs at 2900 rpm on 230/400V or 230V power. Dimensions, performance data, and materials are provided.
This document summarizes a peripheral pump model CT 61. It is a close-coupled regenerative pump with a single-piece motor casing and wall. It has a cast iron or bronze casing and is protected against water entering the motor. It is suitable for clean liquids up to 60°C and can increase network pressure. The pump has an induction motor that runs at 2900 rpm on 230/400V or 230V power. Dimensions, performance data, and materials are provided.
This document summarizes a peripheral pump model CT 61. It is a close-coupled regenerative pump with a single-piece motor casing and wall. It has a cast iron or bronze casing and is protected against water entering the motor. It is suitable for clean liquids up to 60°C and can increase network pressure. The pump has an induction motor that runs at 2900 rpm on 230/400V or 230V power. Dimensions, performance data, and materials are provided.
This document summarizes a peripheral pump model CT 61. It is a close-coupled regenerative pump with a single-piece motor casing and wall. It has a cast iron or bronze casing and is protected against water entering the motor. It is suitable for clean liquids up to 60°C and can increase network pressure. The pump has an induction motor that runs at 2900 rpm on 230/400V or 230V power. Dimensions, performance data, and materials are provided.
Construction Close-coupled peripheral pump (regenerative pump) with turbine impeller. Compact, patented construction with single- piece motor casing and pump-side wall. Protected against water entering the motor from outside.
CT: version with pump casing in cast iron.
B-CT: version with pump casing in bronze (the pumps are supplied fully painted).
Applications For clean liquids without abrasives, without suspended solids, non-explosive, non-aggressive for the pump materials. For increasing network pressure (follow local specifications). For the reduced dimensions, these pumps are very well suitable to be mounted in cooling and air-conditioning machines and equipments, circulation.
Operating conditions Liquid temperature up to 60 C. Ambient temperature up to 40 C. Total suction lift up to 7 m. Continuous duty.
Motor 2-pole induction motor, 50 Hz (n 2900 rpm). Materials CT 61: three-phase 230/400 V 10%. CTM 61: single-phase 230 V 10%, with thermal protector. 19 Components CT 61 B-CT 61 Capacitor inside the terminal box. Pump casing Cast iron Bronze Insulation class F. GJL 200 EN 1561 G-Cu Sn 10 EN 1982 Protection IP 54. Constructed in accordance with: EN 60034-1; Casing cover motor side Brass P- Cu Zn Pb 2 UNI 5705 EN 60335-1, EN 60335-2-41. Impeller Brass P- Cu Zn Pb 2 UNI 5705 Shaft Chrome steel AISI 430 Special features on request - Other voltages. Mechanical seal Carbon - Ceramic - NBR - Frequency 60 Hz (as per 60 Hz data sheet). - Special mechanical seal.
Coverage chart n 2900 rpm
0 U.S. g.p.m. 2 4 6 8 10
0 Imp. g.p.m. 2 4 6 8 44 140 40 CTM 61 CT 61 120
30 100
H H m ft 20 60
40 10
20
0 0 0 m 3/h 1 2 2.6 0 Q l/min 10 20 30 40 72.865
www.bedu.nl 169 CT 61 Peripheral Pump
Performance n 2900 rpm
Q 3~ 230V 400V 1~ 230V P2 m3/h 0,48 0,6 0,75 0,96 1,2 1,5 1,89 2,3 A A A kW HP l/min 8 10 12,5 16 20 25 31,5 38 CT 61 CTM 61 1,9 1,1 2,5 0,33 0,45 H m 41 38,5 35,5 31 25,5 19 11 3 B-CT 61 B-CTM 61
