Type Series Booklet

1149.52/2-10 Etaline PumpDrive

In-line Pumps
with Standardized Three-Phase Motor
and Motor-mounted Frequency Inverter
for Continuously Variable Speed Adjustment

Fields of Application Materials

F Heating systems Etaline PumpDrive GN Etaline PumpDrive MN
F Air-conditioning systems Volute casing Cast iron JL1040 2) Cast iron JL1040 2)
Discharge cover Cast iron JL1040 2) Cast iron JL1040 2)
F Service water supply systems Impeller Cast iron JL1040 2) Tin bronze
F Water supply systems Casing wear rings Cast iron JL1040 2) Bronze
F Industrial recirculation systems Shaft Tempered steel C 45 Tempered steel
Shaft sleeve Chrome nickel Chrome nickel
Fluid Handled molybdenum steel 1.4571 molybdenum steel 1.4571
Drive lantern Cast iron JL1040 2) Cast iron JL1040 2)
Liquids not chemically or mechanically aggressive to the pump
2) to EN 1561 GJL-250 (was GG-25)
materials.

Operating Data Drive

Q up to 788 m3/h, 219 l/s Surface-cooled standardized three-phase motor with motor-
H up to 100 m mounted frequency inverter and interference suppression filter
t --10 °C to +110 °C to DIN EN 55 011, Class B <7.5 kW, Class A >11 kW.
pd up to 16 bar 1) Product standard IEC 22G-WG4.
1) The sum of inlet pressure and shutoff head must not exceed the value indicated. Continuously variable speed adjustment via potentiometer,
standard signal or on the basis of a set value using a sensor and
Designation PI controller.
Etaline G N 65 - 160 / 75 2 PDA X Mains voltage: 3~380 V AC --10 % to 480 V AC +10 %
Pump type series Mains frequency: 50/60 Hz
Material combination Power factor: cos φ >0.9
N = stub shaft variant with Mode of operation: continuous operation S1 and
standardized motor intermittent operation S3 3)
Pump size Permanent overload: nominal load + 10 %
Nom. dia. of suction/discharge nozzle Type of enclosure: IP 55
Approx. impeller diameter Thermal class: F/B
Motor rating x 10 (example: 7.5 kW) Design up to 4 kW: V1
Number of poles from 5.5 kW: V1 / V15
Advanced/Basic 3) In a humid environment, condensation on the Hya-Drive during intermittent
X = differential pressure transmitter operation must be prevented.

Pulsed current sensitive earth leakage circuit

Design breakers must not be used as sole protective de-
Close-coupled in-line pump with variable speed standardized vices against indirect contact for PumpDrive, as the direct-cur-
motor. The pump shaft is rigidly connected to the motor shaft. rent component in the earth leakage current may prevent the
circuit breaker from tripping the unit (VDE DIN 010).
Bearings Universal a.c./d.c. sensitive circuit breakers can be used, how-
Grease-lubricated deep-groove ball bearings. ever.

Shaft Seal
Maintenance-free, uncooled mechanical seal to EN 12 756.
 10 US.gpm 20 30 40 50 100 200 300 400 500 1000 2000

2
10 IM.gpm 20 30 40 50 100 200 300 400 500 1000

2 poles
200

500

400
Selection Charts

100--250
100
300
32--200 50--250
65--250
40--250 80--250
125--200
80--160 200
50--160 100--160
50

40
65--160 100--160
32--160
30 100
80--160
100--170
125--160
20

40--160 50
80--210
40

10 100--125 100--170
30

20

5
ft
4

For individual characteristic curves see Characteristic Curve Booklet 1149.55

3 10
H
[m]
2
3
2 3 4 5 Q[m/h] 10 20 30 40 50 100 200 300 400 500

1 l/s 2 3 4 5 10 20 30 40 50 100
KE1149.42/1
Etaline PumpDrive
 5 US.gpm 10 20 30 40 50 100 200 300 400 500 1000 2000 3000

4 5 IM.gpm 10 20 30 40 50 100 200 300 400 500 1000 2000

4 poles
60
200--315
50

40
40--250 65--250
80--250 100--250 150--250
125--250 100
30
50--250
32--200
80--210 125--200
20
100--200 150--200
50

80--160
40
32--160 50--160 100--170 200--250
10
30
65--160 125--160
100--160

20

4
40--160

3 10

For individual characteristic curves see Characteristic Curve Booklet 1149.55

H 5
[m] 100--125 ft
4

1
3
1 Q[m/h] 2 3 4 5 10 20 30 40 50 100 200 300 400 500 800

0.3 0.4 0.5 1 l/s 2 3 4 5 10 20 30 40 50 100 200

KE1149.44/1

3
Etaline PumpDrive
 Etaline PumpDrive

2-pole Models 1)
Etaline Motor Weight Etaline Motor Weight
PumpDrive Size P2 2) 400 V PumpDrive Size P2 2) 400 V
2-pole kW ~A ~ kg 2-pole kW ~A ~ kg
32-160/302 PD 100L 3,0 8,0 60 100-125/552 PD 132S 5,5 13,0 105
32-160/402 PD 112M 4,0 10,0 74 100-125/752 PD 132S 7,5 16,5 118
32-160/552 PD 132S 5,5 13,0 85 100-125/1102 PD 160M 11,0 25,0 154
32-160/752 PD 132S 7,5 16,5 98 100-125/1502 PD 160M 15,0 31,0 163
32-160/1102 PD 160M 11,0 25,0 134 100-125/1852 PD 160L 18,5 39,0 190
32-200/552 PD 132S 5,5 13,0 93 100-125/2202 PD 180M 22,0 45,0 219
32-200/752 PD 132S 7,5 16,5 106 100-160/752 PD 132S 7,5 16,5 116
32-200/1102 PD 160M 11,0 25,0 142 100-160/1102 PD 160M 11,0 25,0 152
32-200/1502 PD 160M 15,0 31,0 151 100-160/1502 PD 160M 15,0 31,0 161
32-200/1852 PD 160L 18,5 39,0 178 100-160/1852 PD 160L 18,5 39,0 188
40-160/402 PD 112M 4,0 10,0 75 100-160/2202 PD 180M 22,0 45,0 216
40-160/552 PD 132S 5,5 13,0 87 100-160/3002 PD 200L 30,0 65,0 296
40-160/752 PD 132S 7,5 16,5 100 100-160/3702 PD 200L 37,0 80,0 325
40-160/1102 PD 160M 11,0 25,0 135 100-170/1502 PD 160M 15,0 31,0 172
40-160/1502 PD 160M 15,0 31,0 144 100-170/1852 PD 160L 18,5 39,0 199
40-250/1102 PD 160M 11,0 25,0 151 100-170/2202 PD 180M 22,0 45,0 228
40-250/1502 PD 160M 15,0 31,0 160 100-170/3002 PD 200L 30,0 65,0 307
40-250/1852 PD 160L 18,5 39,0 187 100-170/3702 PD 200L 37,0 80,0 336
40-250/2202 PD 180M 22,0 45,0 215 100-200/3002 PD 200L 30,0 65,0 342
50-160/552 PD 132S 5,5 13,0 89 100-200/3702 PD 200L 37,0 80,0 371
50-160/752 PD 132S 7,5 16,5 102 100-200/4502 PD 225M 45,0 93,0 495
50-160/1102 PD 160M 11,0 25,0 138 100-250/4502 PD 225M 45,0 93,0 498
50-160/1502 PD 160M 15,0 31,0 147 125-160/2202 PD 180M 22,0 45,0 293
50-160/1852 PD 160L 18,5 39,0 174 125-160/3002 PD 200L 30,0 65,0 373
50-160/2202 PD 180M 22,0 45,0 202 125-160/3702 PD 200L 37,0 80,0 402
50-160/3002 PD 200L 30,0 65,0 281 125-160/4502 PD 225M 45,0 93,0 526
50-250/1502 PD 160M 15,0 31,0 163 125-200/3702 PD 200L 37,0 80,0 399
50-250/1852 PD 160L 18,5 39,0 190 125-200/4502 PD 225M 45,0 93,0 522
50-250/2202 PD 180M 22,0 45,0 219 1) Rated speed = 3000 rpm
50-250/3002 PD 200L 30,0 65,0 298 2) Line choke included in scope of supply from motor rating P2 < 45 kW
65-160/752 PD 132S 7,5 16,5 104
65-160/1102 PD 160M 11,0 25,0 140
65-160/1502 PD 160M 15,0 31,0 149
65-160/1852 PD 160L 18,5 39,0 176
65-160/2202 PD 180M 22,0 45,0 205
65-160/3002 PD 200L 30,0 65,0 284
65-160/3702 PD 200L 37,0 80,0 313
65-250/1852 PD 160L 18,5 39,0 195
65-250/2202 PD 180M 22,0 45,0 223
65-250/3002 PD 200L 30,0 65,0 302
65-250/3702 PD 200L 37,0 80,0 331
80-160/752 PD 132S 7,5 16,5 110
80-160/1102 PD 160M 11,0 25,0 146
80-160/1502 PD 160M 15,0 31,0 155
80-160/1852 PD 160L 18,5 39,0 182
80-160/2202 PD 180M 22,0 45,0 211
80-160/3002 PD 200L 30,0 65,0 290
80-160/3702 PD 200L 37,0 80,0 319
80-210/1852 PD 160L 18,5 39,0 194
80-210/2202 PD 180M 22,0 45,0 222
80-210/3002 PD 200L 30,0 65,0 302
80-210/3702 PD 200L 37,0 80,0 331
80-250/3002 PD 200L 30,0 65,0 313
80-250/3702 PD 200L 37,0 80,0 342
80-250/4502 PD 225M 45,0 93,0 465

4
 Etaline PumpDrive

4-pole Models 1)
Etaline Motor Weight Etaline Motor Weight
P
PumpDrive
Di Size P2 400 V P
PumpDrive
Di Size P2 2) 400 V
4-pole kW ~ A ~ kg 4-pole kW ~ A ~ kg
32-160/054 PD 80 0.55 1.8 41 80-250/554 PD 132S 5.5 13.0 121
32-160/074 PD 80 0.75 2.5 42 80-250/754 PD 132M 7.5 16.5 134
32-160/114 PD 90S 1.1 3.5 48 80-250/1104 PD 160M 11.0 25.0 176
32-160/154 PD 90L 1.5 4.8 51 80-250/1504 PD 160L 15.0 31.0 202
32-160/224 PD 100L 2.2 6.0 61 80-250/1854 PD 180M 18.5 39.0 227
32-200/114 PD 90S 1.1 3.5 55 80-250/2204 PD 180L 22.0 45.0 247
32-200/154 PD 90L 1.5 4.8 58 100-125/154 PD 90L 1.5 4.8 71
32-200/224 PD 100L 2.2 6.0 69 100-125/224 PD 100L 2.2 6.0 81
32-200/304 PD 100L 3.0 8.0 74 100-125/304 PD 100L 3.0 8.0 86
32-200/404 PD 112M 4.0 10.0 84 100-125/404 PD 112M 4.0 10.0 96
40-160/054 PD 80 0.55 1.8 42 100-160/154 PD 90L 1.5 4.8 68
40-160/074 PD 80 0.75 2.5 43 100-160/224 PD 100L 2.2 6.0 79
40-160/114 PD 90S 1.1 3.5 49 100-160/304 PD 100L 3.0 8.0 84
40-160/154 PD 90L 1.5 4.8 52 100-160/404 PD 112M 4.0 10.0 94
40-160/224 PD 100L 2.2 6.0 62 100-160/554 PD 132S 5.5 13.0 105
40-250/224 PD 100L 2.2 6.0 78 100-160/754 PD 132M 7.5 16.5 120
40-250/304 PD 100L 3.0 8.0 83 100-170/224 PD 100L 2.2 6.0 90
40-250/404 PD 112M 4.0 10.0 93 100-170/304 PD 100L 3.0 8.0 95
40-250/554 PD 132S 5.5 13.0 104 100-170/404 PD 112M 4.0 10.0 105
40-250/754 PD 132M 7.5 16.5 119 100-170/554 PD 132S 5.5 13.0 116
40-250/1104 PD 160M 11.0 25.0 159 100-170/754 PD 132M 7.5 16.5 131
50-160/114 PD 90S 1.1 3.5 51 100-170/1104 PD 160M 11.0 25.0 171
50-160/154 PD 90L 1.5 4.8 54 100-200/404 PD 112M 4.0 10.0 140
50-160/224 PD 100L 2.2 6.0 65 100-200/554 PD 132S 5.5 13.0 151
50-160/304 PD 100L 3.0 8.0 70 100-200/754 PD 132M 7.5 16.5 164
50-160/404 PD 112M 4.0 10.0 80 100-200/1104 PD 160M 11.0 25.0 205
50-250/304 PD 100L 3.0 8.0 86 100-200/1504 PD 160L 15.0 31.0 231
50-250/404 PD 112M 4.0 10.0 96 100-200/1854 PD 180M 18.5 39.0 257
50-250/554 PD 132S 5.5 13.0 107 100-200/2204 PD 180L 22.0 45.0 277
50-250/754 PD 132M 7.5 16.5 122 100-250/754 PD 132M 7.5 16.5 167
50-250/1104 PD 160M 11.0 25.0 162 100-250/1104 PD 160M 11.0 25.0 208
65-160/154 PD 90L 1.5 4.8 57 100-250/1504 PD 160L 15.0 31.0 234
65-160/224 PD 100L 2.2 6.0 67 100-250/1854 PD 180M 18.5 39.0 260
65-160/304 PD 100L 3.0 8.0 72 100-250/2204 PD 180L 22.0 45.0 280
65-160/404 PD 112M 4.0 10.0 82 100-250/3004 PD 200L 30.0 65.0 359
65-160/554 PD 132S 5.5 13.0 93 100-250/3704 PD 225S 37.0 80.0 454
65-250/304 PD 100L 3.0 8.0 91 125-160/404 PD 112M 4.0 10.0 172
65-250/404 PD 112M 4.0 10.0 101 125-160/554 PD 132S 5.5 13.0 182
65-250/554 PD 132S 5.5 13.0 112 125-160/754 PD 132M 7.5 16.5 195
65-250/754 PD 132M 7.5 16.5 127 125-160/1104 PD 160M 11.0 25.0 236
65-250/1104 PD 160M 11.0 25.0 167 125-160/1504 PD 160L 15.0 31.0 262
65-250/1504 PD 160L 15.0 31.0 193 125-200/554 PD 132S 5.5 13.0 178
80-160/154 PD 90L 1.5 4.8 62 125-200/754 PD 132M 7.5 16.5 191
80-160/224 PD 100L 2.2 6.0 73 125-200/1104 PD 160M 11.0 25.0 233
80-160/304 PD 100L 3.0 8.0 78 125-200/1504 PD 160L 15.0 31.0 259
80-160/404 PD 112M 4.0 10.0 88 125-200/1854 PD 180M 18.5 39.0 284
80-160/554 PD 132S 5.5 13.0 99 125-200/2204 PD 180L 22.0 45.0 304
80-160/754 PD 132M 7.5 16.5 114 125-200/3004 PD 200L 30.0 65.0 384
80-210/404 PD 112M 4.0 10.0 100 125-250/754 PD 132M 7.5 16.5 200
80-210/554 PD 132S 5.5 13.0 111 125-250/1104 PD 160M 11.0 25.0 241
80-210/754 PD 132M 7.5 16.5 126 125-250/1504 PD 160L 15.0 31.0 267
80-210/1104 PD 160M 11.0 25.0 166 125-250/1854 PD 180M 18.5 39.0 292
80-210/1504 PD 160L 15.0 31.0 192 125-250/2204 PD 180L 22.0 45.0 312
1)
125-250/3004 PD 200L 30.0 65.0 392
Rated speed = 1500 rpm
2) 125-250/3704 PD 225S 37.0 80.0 487
Line choke included in scope of supply from motor rating P2 < 45 kW
125-250/4504 PD 225M 45.0 93.0 530

5
 Etaline PumpDrive

4-pole Models 1)
Etaline Motor Weight
P
PumpDrive
Di Size P2 2) 400 V
4-pole kW ~ A ~ kg
150-200/754 PD 132M 7.5 16.5 227
150-200/1104 PD 160M 11.0 25.0 268
150-200/1504 PD 160L 15.0 31.0 294
150-200/1854 PD 180M 18.5 39.0 319
150-200/2204 PD 180L 22.0 45.0 339
150-200/3004 PD 200L 30.0 65.0 419
150-200/3704 PD 225S 37.0 80.0 514
150-200/4504 PD 225M 45.0 93.0 557
150-250/1104 PD 160M 11.0 25.0 261
150-250/1504 PD 160L 15.0 31.0 287
150-250/1854 PD 180M 18.5 39.0 313
150-250/2204 PD 180L 22.0 45.0 333
150-250/3004 PD 200L 30.0 65.0 412
150-250/3704 PD 225S 37.0 80.0 507
150-250/4504 PD 225M 45.0 93.0 550
200-250/1854 PD 180M 18.5 39.0 367
200-250/2204 PD 180L 22.0 45.0 387
200-250/3004 PD 200L 30.0 65.0 466
200-250/3704 PD 225S 37.0 80.0 561
200-250/4504 PD 225M 45.0 93.0 604
200-315/3004 PD 200L 30.0 65.0 473
200-315/3704 PD 225S 37.0 80.0 569
200-315/4504 PD 225M 45.0 93.0 612
1) Rated speed = 1500 rpm
2) Line choke included in scope of supply from motor rating P2 < 45 kW

6
 Etaline PumpDrive

Mechanical Features

Pressure boundary Vent valve

designed for 16 bar to ensure avoids dry running of
In-line design for easy
high operating reliability the mechanical seal
installation and simple
(if pump is installed vertically)
piping layout

Impeller
with optimized hydraulics,
excellent efficiency

Easy-to-service
shaft sleeve of chrome
nickel molybdenum steel
prevents wear on the shaft

Easy-to-replace
casing wear rings;
no wear on the casing

Mechanical seal,
uncooled and maintenance-free,
to EN 12 756

PumpDrive
Standard Functions Protective Functions
-- Diagnostic LED signals operation, overload or fault -- Electronic overcurrent trip
-- Increased starting torque -- Integrated EMC (electromagnetic compatibility) filter,
-- Min. and max. speed pump-specific 1) Class B <7.5 kW, Class A >11 kW
-- Two isolated analog inputs for standard signals -- Automatic overload control
live zero yes / no 1) -- Thermal overload control
-- Automatic restart after automatic safety tripping yes / no 1) -- Full motor protection by PTC thermistors
-- 3 restarting attempts within 3 seconds each 1) -- Undervoltage/overvoltage protection
-- Modes of operation: open-loop control / differential pressure -- Phase short-circuit protection
control by integrated PI controller -- Protective earthing
-- External standard signal 0/2 -- 10 V / 0/4 -- 20 mA -- Dry-running protection
-- General fault signalling contact -- Start/stop with digital input
(change-over contact 240 V AC, max. 1 A) -- No motor protection or mains switch required
-- Reference value (set point) setting via integrated potentio-
meter
1) optional with control panel

7
 Etaline PumpDrive

PumpDrive Features

Features PumpDrive ...

Basic Advanced
Protective functions
Thermal motor protection by PTC thermistor H H
Electric motor protection by over-/undervoltage monitor H H
Dynamic overload protection by speed limit (i2t control) H H
Dry running protection H
Minimum flow stop H
Characteristic curve monitor (Qmin, Qmax) H

Control
Open-loop control via set point H H
Selectable speed (0 to 70 Hz) H H
Periodic check of operation H H
(stop at minimum speed after a defined period of time)
Adjustable start and stop ramps H H
Slave in multiple-pump configuration with up to 6 pumps H H
Master in multiple-pump configuration with up to 6 pumps H
Parameterisable H/Q/P curve H

Control
Close-loop control operation via integrated, variable PI controller H H
Differential pressure control H H
Level control H H
Temperature control H H
Flow control H H
Pressure control with flow-dependent set point adjustment H H
(dynamic pressure compensation)

Commissioning/Start-up
Plug & Run H H
Automatic sensor detection (at initial start of frequency inverter) H H

Operation
3 LEDs (OK, warning and alert) H H
Control panel (optional), can be rotated by 180_ H
Control panel, can be rotated by 180° H

Monitoring
Fault history H H
El. energy input meter (kWh) H
Operating hours meter (motor, frequency inverter) H H
Energy saving meter (kWh) H

Communication
Field bus system Profibus H H
Field bus system LON H H
RS 232 Service interface H H

Installation
CM: in control cabinet IP 21 H H
MM: with adapter on motor IP 55 H H
WM: wall-mounted IP 55 H H

Additional functions (planned)

Sensorless flow rate estimate H
Sensorless control H

8
 Etaline PumpDrive

List of Fluids
Fluid pumped Application limits Casing/Impeller Mechanical seal Variant Comments
materials materials code

Q1Q1X4GG
U3U3VGG
Tin bronze
Cast iron/

Cast iron/

BQ1EGG
U3BEGG
Cast iron
GN MN 6 9 10 11
Water 1)
Service water t < 110 ˚C, p < 10 bar j j GN 10
Heating water 4) t < 110 ˚C, p < 16 bar J J GN 6 If used as circulator to
4) DIN 4752; pmax. <10 bar
Heating water t < 110 ˚C, p < 10 bar j j GN 10
Cooling water t < 60 ˚C, p < 10 bar j j GN 10 Provide open-loop
circuit MN 10
(without antifreeze agent)
Cooling water pH value >7.5 t > --10 ˚C, p < 10 bar J J GN 11
(with antifreeze agent) 2) t < 110 ˚C
Slightly contaminated water t < 60 ˚C, p < 10 bar j j GN 10
Clean water 3) t < 60 ˚C, p < 10 bar J J GN 11
Untreated water t < 60 ˚C, p < 10 bar j j GN 10
Swimming pool water, t < 60 ˚C, p < 10 bar j j GN 10 In case of requirements as
per DIN 19643,
fresh water provide MN 10 (processing
via product number)

Drinking water t < 60 ˚C, p < 10 bar j j MN 11

Partly desalinated water t < 110 ˚C, p < 10 bar J J GN 11
Refrigerants, cooling brines
Cooling brine, inorganic t > --10 ˚C, p < 10 bar J J GN 11
pH >7.5, inhibited t < 25 ˚C
Water with antifreeze agent t > --10 ˚C, p < 10 bar J J GN 11
pH >7.5 1) 2) t < 110 ˚C
Oils / emulsions
Drilling / grinding emulsion t < 60 ˚C, p < 10 bar j j j GN 9
Oil / water emulsion t < 60 ˚C, p < 10 bar j j j GN 9
Cleaning agents
Degreasing/ t < 90 ˚C, p < 10 bar j j GN 10
cleaning solutions
pH 7 to 14
Bottle rinsing lyes t < 90 ˚C, p < 10 bar j j GN 10
J = Standard j = Prices and delivery times upon request
1) General evaluation criteria for water analysis: pH value > 7; content
Example: of chlorides (Cl’) < 250 mg/kg, chlorine (Cl2) < 0.6 mg/kg.
2) Antifreeze agent on ethylene glycol basis with inhibitors.
Given:
Content >20 to 50 % (for example, Antifrogen N)
Clean water of 20 ˚C, Q = 60 m3/h, H = 15 m 3) No ultrapure water: conductivity at 25 ˚C: <800 mS/cm, neutral with
Found: Etaline PumpDrive GN 80-160/404 GN 11 regard to chemical corrosion
4) For heating water we recommend application of the VDI 2035 or Vd
Pump size as per selection chart TÜV 1466 standards, otherwise a reduced service life of the mech-
anical seal may be the consequence.

Variant code Mechanical seal material codes:

G = pump casing and impeller made of JL1040 U3 = tungsten carbide (metal carbide)
N = stub shaft variant with standardized motor B = carbon, synthetic resin impregnated
11 = mechanical seal materials BQ1EGG (to EN 12 756) Q1 = silicon carbide
G = CrNiMo steel
V = fluorocarbon rubber (Viton)
X4 = special elastomer
E = EP rubber

9
 Etaline PumpDrive

Dimensions of 2-pole motors

¶x Minimum clearance for removal

1) DN = EN 1092-2, PN 16 (was DIN 2633)
2) Rc = ISO 7/1 1M.1/.2 Pressure gauge
6B.1/.2/.3 Pumped fluid drain
6 D.1/.2 Pumped fluid venting
5B Vent connection for the mechanical seal
chamber

Tolerances of connecting dimensions as per EN 735 Dimensions in mm

Etaline DN 1) a ≈ b1 ≈ b2 d1 d2 ≈d3 g ≈p h1 h2 ≈I1 ≈I2 t x w z 1M.1/.2 6B.2 2)
Pump Drive 6B.1/.3
6D.1 2)
32-160/302 32 69 112 120 M10 250 203 163 285 160 160 600 531 12.5 100 184 190 Rc 3/8 --
32-160/402 32 69 112 120 M10 250 227 -- 340 160 160 624 555 12.5 100 184 250 Rc 3/8 --
32-160/552 32 69 112 120 M10 300 267 -- 355 160 160 689 620 12.5 100 207 250 Rc 3/8 --
32-160/752 32 69 112 120 M10 300 267 -- 355 160 160 689 620 12.5 100 207 250 Rc 3/8 --
32-160/1102 32 69 112 120 M10 350 320 -- 440 160 160 855 786 12.5 100 240 320 Rc 3/8 --
32-200/552 32 95 129 135 M10 300 267 -- 355 190 190 711 616 12.5 100 203 250 Rc 3/8 --
32-200/752 32 95 129 135 M10 300 267 -- 355 190 190 711 616 12.5 100 203 250 Rc 3/8 --
32-200/1102 32 95 129 135 M10 350 320 -- 440 190 190 877 782 12.5 100 236 320 Rc 3/8 --
32-200/1502 32 95 129 135 M10 350 320 -- 440 190 190 877 782 12.5 100 236 320 Rc 3/8 --
32-200/1852 32 95 129 135 M10 350 320 -- 440 190 190 883 788 12.5 100 236 320 Rc 3/8 --
40-160/402 40 80 112 119 M10 250 227 -- 340 160 160 636 556 12.5 100 185 250 Rc 3/8 --
40-160/552 40 80 112 119 M10 300 267 -- 355 160 160 701 621 12.5 100 208 250 Rc 3/8 --
40-160/752 40 80 112 119 M10 300 267 -- 355 160 160 701 621 12.5 100 208 250 Rc 3/8 --
40-160/1102 40 80 112 119 M10 350 320 -- 440 160 160 867 787 12.5 100 241 320 Rc 3/8 --
40-160/1502 40 80 112 119 M10 350 320 -- 440 160 160 867 787 12.5 100 241 320 Rc 3/8 --
40-250/1102 40 95 161 168 M10 350 320 -- 440 220 220 877 782 12.5 100 236 320 Rc 3/8 --
40-250/1502 40 95 161 168 M10 350 320 -- 440 220 220 877 782 12.5 100 236 320 Rc 3/8 --
40-250/1852 40 95 161 168 M10 350 320 -- 440 220 220 883 788 12.5 100 236 320 Rc 3/8 --
40-250/2202 40 95 161 168 M10 350 363 -- 515 220 220 941 846 12.5 100 236 320 Rc 3/8 --
50-160/552 50 85 113 125 M10 300 267 -- 355 170 170 711 626 12.5 100 213 250 Rc 3/8 --
50-160/752 50 85 113 125 M10 300 267 -- 355 170 170 711 626 12.5 100 213 250 Rc 3/8 --
50-160/1102 50 85 113 125 M10 350 320 -- 440 170 170 877 792 12.5 100 246 320 Rc 3/8 --
50-160/1502 50 85 113 125 M10 350 320 -- 440 170 170 877 792 12.5 100 246 320 Rc 3/8 --
50-160/1852 50 85 113 125 M10 350 320 -- 440 170 170 883 798 12.5 100 246 320 Rc 3/8 --
50-160/2202 50 85 113 125 M10 350 363 -- 515 170 170 941 856 12.5 100 246 320 Rc 3/8 --
50-160/3002 50 85 113 125 M10 400 402 -- 555 170 170 1000 915 12.5 100 246 450 Rc 3/8 --
50-250/1502 50 100 160 175 M10 350 320 -- 440 220 220 887 787 12.5 100 241 320 Rc 3/8 --
50-250/1852 50 100 160 175 M10 350 320 -- 440 220 220 893 793 12.5 100 241 320 Rc 3/8 --
50-250/2202 50 100 160 175 M10 350 363 -- 515 220 220 951 851 12.5 100 241 320 Rc 3/8 --
50-250/3002 50 100 160 175 M10 400 402 -- 555 220 220 1010 910 12.5 100 241 450 Rc 3/8 --
65-160/752 65 100 113 125 M10 300 267 -- 355 170 170 726 626 12.5 100 213 250 Rc 3/8 --
65-160/1102 65 100 113 125 M10 350 320 -- 440 170 170 892 792 12.5 100 246 320 Rc 3/8 --
65-160/1502 65 100 113 125 M10 350 320 -- 440 170 170 892 792 12.5 100 246 320 Rc 3/8 --
65-160/1852 65 100 113 125 M10 350 320 -- 440 170 170 898 798 12.5 100 246 320 Rc 3/8 --
65-160/2202 65 100 113 125 M10 350 363 -- 515 170 170 956 856 12.5 100 246 320 Rc 3/8 --
65-160/3002 65 100 113 125 M10 400 402 -- 555 170 170 1015 915 12.5 100 246 450 Rc 3/8 --
65-160/3702 65 100 113 125 M10 400 402 -- 555 170 170 1015 915 12.5 100 246 450 Rc 3/8 --
65-250/1852 65 105 167 190 M10 350 320 -- 440 225 250 908 803 12.5 100 251 320 Rc 3/8 --
65-250/2202 65 105 167 190 M10 350 363 -- 515 225 250 966 861 12.5 100 251 320 Rc 3/8 --
65-250/3002 65 105 167 190 M10 400 402 -- 555 225 250 1025 920 12.5 100 251 450 Rc 3/8 --
65-250/3702 65 105 167 190 M10 400 402 -- 555 225 250 1025 920 12.5 100 251 450 Rc 3/8 --

10
 Etaline PumpDrive

Tolerances of connecting dimensions as per EN 735 Dimensions in mm

Etaline DN 1) a ≈ b1 ≈ b2 d1 d2 ≈d3 g ≈p h1 h2 ≈I1 ≈I2 t x w z 1M.1/.2 6B.2 2)
Pump Drive 6B.1/.3
6D.1 2)
80-160/752 80 97 113 135 M10 300 267 -- 355 180 180 733 636 12.5 100 223 250 Rc 3/8 --
80-160/1102 80 97 113 135 M10 350 320 -- 440 180 180 899 802 12.5 100 256 320 Rc 3/8 --
80-160/1502 80 97 113 135 M10 350 320 -- 440 180 180 899 802 12.5 100 256 320 Rc 3/8 --
80-160/1852 80 97 113 135 M10 350 320 -- 440 180 180 905 808 12.5 100 256 320 Rc 3/8 --
80-160/2202 80 97 113 135 M10 350 363 -- 515 180 180 963 866 12.5 100 256 320 Rc 3/8 --
80-160/3002 80 97 113 135 M10 400 402 -- 555 180 180 1022 925 12.5 100 256 450 Rc 3/8 --
80-160/3702 80 97 113 135 M10 400 402 -- 555 180 180 1022 925 12.5 100 256 450 Rc 3/8 --
80-210/1852 80 151 140 160 M10 350 320 -- 440 250 250 929 778 12.5 140 226 320 Rc 3/8 Rc 3/8
80-210/2202 80 151 140 160 M10 350 363 -- 515 250 250 987 836 12.5 140 226 320 Rc 3/8 Rc 3/8
80-210/3002 80 151 140 160 M10 400 402 -- 555 250 250 1046 895 12.5 140 226 450 Rc 3/8 Rc 3/8
80-210/3702 80 151 140 160 M10 400 402 -- 555 250 250 1046 895 12.5 140 226 450 Rc 3/8 Rc 3/8
80-250/3002 80 114 165 184 M10 400 402 -- 555 250 250 1050 936 12.5 140 267 450 Rc 3/8 --
80-250/3702 80 114 165 184 M10 400 402 -- 555 250 250 1050 936 12.5 140 267 450 Rc 3/8 --
80-250/4502 80 114 165 184 M10 450 442 -- 670 250 250 1160 1046 12.5 140 291 450 Rc 3/8 --
100-125/552 100 121 113 153 M10 300 267 -- 355 230 220 736 615 12.5 100 202 250 Rc 1/2 --
100-125/752 100 121 113 153 M10 300 267 -- 355 230 220 736 615 12.5 100 202 250 Rc 1/2 --
100-125/1102 100 121 113 153 M10 350 320 -- 440 230 220 902 781 12.5 100 235 320 Rc 1/2 --
100-125/1502 100 121 113 153 M10 350 320 -- 440 230 220 902 781 12.5 100 235 320 Rc 1/2 --
100-125/1852 100 121 113 153 M10 350 320 -- 440 230 220 908 787 12.5 100 235 320 Rc 1/2 --
100-125/2202 100 121 113 153 M10 350 363 -- 515 230 220 966 845 12.5 100 235 320 Rc 1/2 --
100-160/752 100 118 114 144 M10 300 267 -- 355 250 200 741 623 12.5 100 210 250 Rc 1/2 --
100-160/1102 100 118 114 144 M10 350 320 -- 440 250 200 907 789 12.5 100 243 320 Rc 1/2 --
100-160/1502 100 118 114 144 M10 350 320 -- 440 250 200 907 789 12.5 100 243 320 Rc 1/2 --
100-160/1852 100 118 114 144 M10 350 320 -- 440 250 200 913 795 12.5 100 243 320 Rc 1/2 --
100-160/2202 100 118 114 144 M10 350 363 -- 515 250 200 971 853 12.5 100 243 320 Rc 1/2 --
100-160/3002 100 118 114 144 M10 400 402 -- 555 250 200 1030 912 12.5 100 243 450 Rc 1/2 --
100-160/3702 100 118 114 144 M10 400 402 -- 555 250 200 1030 912 12.5 100 243 450 Rc 1/2 --
100-170/1502 100 157 121 155 M20 350 320 -- 440 245 205 949 792 25.0 100 246 320 Rc 1/2 --
100-170/1852 100 157 121 155 M20 350 320 -- 440 245 205 955 798 25.0 100 246 320 Rc 1/2 --
100-170/2202 100 157 121 155 M20 350 363 -- 515 245 205 1013 856 25.0 100 246 320 Rc 1/2 --
100-170/3002 100 157 121 155 M20 400 402 -- 555 245 205 1072 915 25.0 100 246 450 Rc 1/2 --
100-170/3702 100 157 121 155 M20 400 402 -- 555 245 205 1072 915 25.0 100 246 450 Rc 1/2 --
100-200/3002 100 180 166 195 M20 400 402 -- 555 305 245 1095 915 25.0 140 246 450 Rc 1/2 Rc 1/2
100-200/3702 100 180 166 195 M20 400 402 -- 555 305 245 1095 915 25.0 140 246 450 Rc 1/2 Rc 1/2
100-200/4502 100 180 166 195 M20 450 442 -- 670 305 245 1205 1025 25.0 140 270 450 Rc 1/2 Rc 1/2
100-250/4502 100 158 191 212 M20 450 442 -- 670 290 260 1207 1049 25.0 140 294 450 Rc 1/2 Rc 1/2
125-160/2202 125 203 173 220 M20 350 363 -- 515 340 280 1059 856 25.0 140 246 320 Rc 1/2 Rc 1/2
125-160/3002 125 203 173 220 M20 400 402 -- 555 340 280 1118 915 25.0 140 246 450 Rc 1/2 Rc 1/2
125-160/3702 125 203 173 220 M20 400 402 -- 555 340 280 1118 915 25.0 140 246 450 Rc 1/2 Rc 1/2
125-160/4502 125 203 173 220 M20 450 442 -- 670 340 280 1228 1025 25.0 140 270 450 Rc 1/2 Rc 1/2
125-200/3702 125 207 175 213 M20 400 402 -- 555 340 280 1122 915 25.0 140 246 450 Rc 1/2 Rc 1/2
125-200/4502 125 207 175 213 M20 450 442 -- 670 340 280 1232 1025 25.0 140 270 450 Rc 1/2 Rc 1/2

11
 Etaline PumpDrive

Dimensions of 4-pole motors

¶x Minimum clearance for removal

1) DN = EN 1092-2, PN 16 (was DIN 2633)
2) Rc = ISO 7/1 1M.1/.2 Pressure gauge
6B.1/.2/.3 Pumped fluid drain
6 D.1/.2 Pumped fluid venting
5B Vent connection for the mechanical seal
chamber

Tolerances of connecting dimensions as per EN 735 Dimensions in mm

Etaline DN 1) a ≈ b1 ≈ b2 d1 d2 ≈d3 g ≈p h1 h2 ≈I1 ≈I2 t x w z 1M.1/.2 6B.2 2)
Pump Drive 6B.1/.3
6D.1 2)
32-160/054 32 69 112 120 M10 200 163 120 265 160 160 494 425 12.5 100 170 190 Rc 3/8 --
32-160/074 32 69 112 120 M10 200 163 120 265 160 160 494 425 12.5 100 170 190 Rc 3/8 --
32-160/114 32 69 112 120 M10 200 180 128 265 160 160 521 452 12.5 100 170 190 Rc 3/8 --
32-160/154 32 69 112 120 M10 200 180 128 275 160 160 547 478 12.5 100 170 190 Rc 3/8 --
32-160/224 32 69 112 120 M10 250 203 163 285 160 160 600 531 12.5 100 184 190 Rc 3/8 --
32-200/114 32 95 129 135 M10 200 180 128 265 190 190 543 448 12.5 100 166 190 Rc 3/8 --
32-200/154 32 95 129 135 M10 200 180 128 275 190 190 569 474 12.5 100 166 190 Rc 3/8 --
32-200/224 32 95 129 135 M10 250 203 163 285 190 190 622 527 12.5 100 180 190 Rc 3/8 --
32-200/304 32 95 129 135 M10 250 203 163 285 190 190 657 562 12.5 100 180 190 Rc 3/8 --
32-200/404 32 95 129 135 M10 250 227 -- 340 190 190 646 551 12.5 100 180 250 Rc 3/8 --
40-160/054 40 80 112 119 M10 200 163 120 265 160 160 506 426 12.5 100 171 190 Rc 3/8 --
40-160/074 40 80 112 119 M10 200 163 120 265 160 160 506 426 12.5 100 171 190 Rc 3/8 --
40-160/114 40 80 112 119 M10 200 180 128 265 160 160 533 453 12.5 100 171 190 Rc 3/8 --
40-160/154 40 80 112 119 M10 200 180 128 275 160 160 559 479 12.5 100 171 190 Rc 3/8 --
40-160/224 40 80 112 119 M10 250 203 163 285 160 160 612 532 12.5 100 185 190 Rc 3/8 --
40-250/224 40 95 161 168 M10 250 203 163 285 220 220 622 527 12.5 100 180 190 Rc 3/8 --
40-250/304 40 95 161 168 M10 250 203 163 285 220 220 657 562 12.5 100 180 190 Rc 3/8 --
40-250/404 40 95 161 168 M10 250 227 -- 340 220 220 646 551 12.5 100 180 250 Rc 3/8 --
40-250/554 40 95 161 168 M10 300 267 -- 350 220 220 711 616 12.5 100 203 250 Rc 3/8 --
40-250/754 40 95 161 168 M10 300 267 -- 350 220 220 739 644 12.5 100 203 250 Rc 3/8 --
40-250/1104 40 95 161 168 M10 350 320 -- 440 220 220 877 782 12.5 100 236 320 Rc 3/8 --
50-160/114 50 85 113 125 M10 200 180 128 265 170 170 543 458 12.5 100 176 190 Rc 3/8 --
50-160/154 50 85 113 125 M10 200 180 128 275 170 170 569 484 12.5 100 176 190 Rc 3/8 --
50-160/224 50 85 113 125 M10 250 203 163 285 170 170 622 537 12.5 100 190 190 Rc 3/8 --
50-160/304 50 85 113 125 M10 250 203 163 285 170 170 657 572 12.5 100 190 190 Rc 3/8 --
50-160/404 50 85 113 125 M10 250 227 -- 340 170 170 646 561 12.5 100 190 250 Rc 3/8 --
50-250/304 50 100 160 175 M10 250 203 163 285 220 220 667 567 12.5 100 185 190 Rc 3/8 --
50-250/404 50 100 160 175 M10 250 227 -- 340 220 220 656 556 12.5 100 185 250 Rc 3/8 --
50-250/554 50 100 160 175 M10 300 267 -- 350 220 220 721 621 12.5 100 208 250 Rc 3/8 --
50-250/754 50 100 160 175 M10 300 267 -- 350 220 220 749 649 12.5 100 208 250 Rc 3/8 --
50-250/1104 50 100 160 175 M10 350 320 -- 440 220 220 887 787 12.5 100 241 320 Rc 3/8 --
65-160/154 65 100 113 125 M10 200 180 128 275 170 170 584 484 12.5 100 176 190 Rc 3/8 --
65-160/224 65 100 113 125 M10 250 203 163 285 170 170 637 537 12.5 100 190 190 Rc 3/8 --
65-160/304 65 100 113 125 M10 250 203 163 285 170 170 672 572 12.5 100 190 190 Rc 3/8 --
65-160/404 65 100 113 125 M10 250 227 -- 340 170 170 661 561 12.5 100 190 250 Rc 3/8 --
65-160/554 65 100 113 125 M10 300 267 -- 350 170 170 726 626 12.5 100 213 250 Rc 3/8 --
65-250/304 65 105 167 190 M10 250 203 163 285 225 250 682 577 12.5 100 195 190 Rc 3/8 --
65-250/404 65 105 167 190 M10 250 227 -- 340 225 250 671 566 12.5 100 195 250 Rc 3/8 --
65-250/554 65 105 167 190 M10 300 267 -- 350 225 250 736 631 12.5 100 218 250 Rc 3/8 --
65-250/754 65 105 167 190 M10 300 267 -- 350 225 250 764 659 12.5 100 218 250 Rc 3/8 --
65-250/1104 65 105 167 190 M10 350 320 -- 440 225 250 902 797 12.5 100 251 320 Rc 3/8 --
65-250/1504 65 105 167 190 M10 350 320 -- 440 225 250 908 803 12.5 100 251 320 Rc 3/8 --

12
 Etaline PumpDrive

Tolerances of connecting dimensions as per EN 735 Dimensions in mm

Etaline DN 1) a ≈ b1 ≈ b2 d1 d2 ≈d3 g ≈p h1 h2 ≈I1 ≈I2 t x w z 1M.1/.2 6B.2 2)
Pump Drive 6B.1/.3
6D.1 2)
80-160/154 80 97 113 135 M10 200 180 128 275 180 180 591 494 12.5 100 186 190 Rc 3/8 --
80-160/224 80 97 113 135 M10 250 203 163 285 180 180 644 547 12.5 100 200 190 Rc 3/8 --
80-160/304 80 97 113 135 M10 250 203 163 285 180 180 679 582 12.5 100 200 190 Rc 3/8 --
80-160/404 80 97 113 135 M10 250 227 -- 340 180 180 668 571 12.5 100 200 250 Rc 3/8 --
80-160/554 80 97 113 135 M10 300 267 -- 350 180 180 733 636 12.5 100 223 250 Rc 3/8 --
80-160/754 80 97 113 135 M10 300 267 -- 350 180 180 761 664 12.5 100 223 250 Rc 3/8 --
80-210/404 80 151 140 160 M10 250 227 -- 340 250 250 692 541 12.5 140 170 250 Rc 3/8 Rc 3/8
80-210/554 80 151 140 160 M10 300 267 -- 350 250 250 757 606 12.5 140 193 250 Rc 3/8 Rc 3/8
80-210/754 80 151 140 160 M10 300 267 -- 350 250 250 785 634 12.5 140 193 250 Rc 3/8 Rc 3/8
80-210/1104 80 151 140 160 M10 350 320 -- 440 250 250 923 772 12.5 140 226 320 Rc 3/8 Rc 3/8
80-210/1504 80 151 140 160 M10 350 320 -- 440 250 250 929 778 12.5 140 226 320 Rc 3/8 Rc 3/8
80-250/554 80 114 165 184 M10 300 267 -- 350 250 250 761 647 12.5 140 234 250 Rc 3/8 --
80-250/754 80 114 165 184 M10 300 267 -- 350 250 250 789 675 12.5 140 234 250 Rc 3/8 --
80-250/1104 80 114 165 184 M10 350 320 -- 440 250 250 927 813 12.5 140 267 320 Rc 3/8 --
80-250/1504 80 114 165 184 M10 350 320 -- 440 250 250 933 819 12.5 140 267 320 Rc 3/8 --
80-250/1854 80 114 165 184 M10 350 363 -- 515 250 250 991 877 12.5 140 267 320 Rc 3/8 --
80-250/2204 80 114 165 184 M10 350 363 -- 515 250 250 991 877 12.5 140 267 320 Rc 3/8 --
100-125/154 100 121 113 153 M10 200 180 128 275 230 220 594 473 12.5 100 165 190 Rc 1/2 --
100-125/224 100 121 113 153 M10 250 203 163 285 230 220 647 526 12.5 100 179 190 Rc 1/2 --
100-125/304 100 121 113 153 M10 250 203 163 285 230 220 682 561 12.5 100 179 190 Rc 1/2 --
100-125/404 100 121 113 153 M10 250 227 -- 340 230 220 671 550 12.5 100 179 250 Rc 1/2 --
100-160/154 100 118 114 144 M10 200 180 128 275 250 200 599 481 12.5 100 173 190 Rc 1/2 --
100-160/224 100 118 114 144 M10 250 203 163 285 250 200 652 534 12.5 100 187 190 Rc 1/2 --
100-160/304 100 118 114 144 M10 250 203 163 285 250 200 687 569 12.5 100 187 190 Rc 1/2 --
100-160/404 100 118 114 144 M10 250 227 -- 340 250 200 676 558 12.5 100 187 250 Rc 1/2 --
100-160/554 100 118 114 144 M10 300 267 -- 350 250 200 741 623 12.5 100 210 250 Rc 1/2 --
100-160/754 100 118 114 144 M10 300 267 -- 350 250 200 769 651 12.5 100 210 250 Rc 1/2 --
100-170/224 100 157 121 155 M20 250 203 163 285 245 205 694 537 25.0 100 190 190 Rc 1/2 --
100-170/304 100 157 121 155 M20 250 203 163 285 245 205 729 572 25.0 100 190 190 Rc 1/2 --
100-170/404 100 157 121 155 M20 250 227 -- 340 245 205 718 561 25.0 100 190 250 Rc 1/2 --
100-170/554 100 157 121 155 M20 300 267 -- 350 245 205 783 626 25.0 100 213 250 Rc 1/2 --
100-170/754 100 157 121 155 M20 300 267 -- 350 245 205 811 654 25.0 100 213 250 Rc 1/2 --
100-170/1104 100 157 121 155 M20 350 320 -- 440 245 205 949 792 25.0 100 246 320 Rc 1/2 --
100-200/404 100 180 166 195 M20 250 227 -- 340 305 245 741 561 25.0 140 190 250 Rc 1/2 Rc 1/2
100-200/554 100 180 166 195 M20 300 267 -- 350 305 245 806 626 25.0 140 213 250 Rc 1/2 Rc 1/2
100-200/754 100 180 166 195 M20 300 267 -- 350 305 245 834 654 25.0 140 213 250 Rc 1/2 Rc 1/2
100-200/1104 100 180 166 195 M20 350 320 -- 440 305 245 972 792 25.0 140 246 320 Rc 1/2 Rc 1/2
100-200/1504 100 180 166 195 M20 350 320 -- 440 305 245 978 798 25.0 140 246 320 Rc 1/2 Rc 1/2
100-200/1854 100 180 166 195 M20 350 363 -- 515 305 245 1036 856 25.0 140 246 320 Rc 1/2 Rc 1/2
100-200/2204 100 180 166 195 M20 350 363 -- 515 305 245 1036 856 25.0 140 246 320 Rc 1/2 Rc 1/2
100-250/754 100 158 191 212 M20 300 267 -- 350 290 260 836 678 25.0 140 237 250 Rc 1/2 Rc 1/2
100-250/1104 100 158 191 212 M20 350 320 -- 440 290 260 974 816 25.0 140 270 320 Rc 1/2 Rc 1/2
100-250/1504 100 158 191 212 M20 350 320 -- 440 290 260 980 822 25.0 140 270 320 Rc 1/2 Rc 1/2
100-250/1854 100 158 191 212 M20 350 363 -- 515 290 260 1038 880 25.0 140 270 320 Rc 1/2 Rc 1/2
100-250/2204 100 158 191 212 M20 350 363 -- 515 290 260 1038 880 25.0 140 270 320 Rc 1/2 Rc 1/2
100-250/3004 100 158 191 212 M20 400 402 -- 555 290 260 1097 939 25.0 140 270 450 Rc 1/2 Rc 1/2
100-250/3704 100 158 191 212 M20 450 442 -- 670 290 260 1147 989 25.0 140 294 450 Rc 1/2 Rc 1/2

13
 Etaline PumpDrive

Dimensions of 4-pole motors

¶x Minimum clearance for removal

1) DN = EN 1092-2, PN 16 (was DIN 2633)
2) Rc = ISO 7/1 1M.1/.2 Pressure gauge
6B.1/.2/.3 Pumped fluid drain
6 D.1/.2 Pumped fluid venting
5B Vent connection for the mechanical seal
chamber

Tolerances of connecting dimensions as per EN 735 Dimensions in mm

Etaline DN 1) a ≈ b1 ≈ b2 d1 d2 ≈d3 g ≈p h1 h2 ≈I1 ≈I2 t x w z 1M.1/.2 6B.2 2)
Pump Drive 6B.1/.3
6D.1 2)
125-160/404 125 203 173 220 M20 250 227 -- 340 340 280 764 561 25.0 140 190 250 Rc 1/2 Rc 1/2
125-160/554 125 203 173 220 M20 300 267 -- 350 340 280 829 626 25.0 140 213 250 Rc 1/2 Rc 1/2
125-160/754 125 203 173 220 M20 300 267 -- 350 340 280 857 654 25.0 140 213 250 Rc 1/2 Rc 1/2
125-160/1104 125 203 173 220 M20 350 320 -- 440 340 280 995 792 25.0 140 246 320 Rc 1/2 Rc 1/2
125-160/1504 125 203 173 220 M20 350 320 -- 440 340 280 1001 798 25.0 140 246 320 Rc 1/2 Rc 1/2
125-200/554 125 207 175 213 M20 300 267 -- 350 340 280 833 626 25.0 140 213 250 Rc 1/2 Rc 1/2
125-200/754 125 207 175 213 M20 300 267 -- 350 340 280 861 654 25.0 140 213 250 Rc 1/2 Rc 1/2
125-200/1104 125 207 175 213 M20 350 320 -- 440 340 280 999 792 25.0 140 246 320 Rc 1/2 Rc 1/2
125-200/1504 125 207 175 213 M20 350 320 -- 440 340 280 1005 798 25.0 140 246 320 Rc 1/2 Rc 1/2
125-200/1854 125 207 175 213 M20 350 363 -- 515 340 280 1063 856 25.0 140 246 320 Rc 1/2 Rc 1/2
125-200/2204 125 207 175 213 M20 350 363 -- 515 340 280 1063 856 25.0 140 246 320 Rc 1/2 Rc 1/2
125-200/3004 125 207 175 213 M20 400 402 -- 555 340 280 1122 915 25.0 140 246 450 Rc 1/2 Rc 1/2
125-250/754 125 212 183 215 M20 300 267 -- 350 340 280 866 654 25.0 140 213 250 Rc 1/2 Rc 1/2
125-250/1104 125 212 183 215 M20 350 320 -- 440 340 280 1004 792 25.0 140 246 320 Rc 1/2 Rc 1/2
125-250/1504 125 212 183 215 M20 350 320 -- 440 340 280 1010 798 25.0 140 246 320 Rc 1/2 Rc 1/2
125-250/1854 125 212 183 215 M20 350 363 -- 515 340 280 1068 856 25.0 140 246 320 Rc 1/2 Rc 1/2
125-250/2204 125 212 183 215 M20 350 363 -- 515 340 280 1068 856 25.0 140 246 320 Rc 1/2 Rc 1/2
125-250/3004 125 212 183 215 M20 400 402 -- 555 340 280 1127 915 25.0 140 246 450 Rc 1/2 Rc 1/2
125-250/3704 125 212 183 215 M20 450 442 -- 670 340 280 1177 965 25.0 140 270 450 Rc 1/2 Rc 1/2
125-250/4504 125 212 183 215 M20 450 442 -- 670 340 280 1207 995 25.0 140 270 450 Rc 1/2 Rc 1/2
150-200/754 150 226 185 235 M20 300 267 -- 350 375 315 880 654 25.0 140 213 250 Rc 1/2 Rc 1/2
150-200/1104 150 226 185 235 M20 350 320 -- 440 375 315 1018 792 25.0 140 246 320 Rc 1/2 Rc 1/2
150-200/1504 150 226 185 235 M20 350 320 -- 440 375 315 1024 798 25.0 140 246 320 Rc 1/2 Rc 1/2
150-200/1854 150 226 185 235 M20 350 363 -- 515 375 315 1082 856 25.0 140 246 320 Rc 1/2 Rc 1/2
150-200/2204 150 226 185 235 M20 350 363 -- 515 375 315 1082 856 25.0 140 246 320 Rc 1/2 Rc 1/2
150-200/3004 150 226 185 235 M20 400 402 -- 555 375 315 1141 915 25.0 140 246 450 Rc 1/2 Rc 1/2
150-200/3704 150 226 185 235 M20 450 442 -- 670 375 315 1191 965 25.0 140 270 450 Rc 1/2 Rc 1/2
150-200/4504 150 226 185 235 M20 450 442 -- 670 375 315 1221 995 25.0 140 270 450 Rc 1/2 Rc 1/2
150-250/1104 150 220 221 270 M20 350 320 -- 440 370 330 1012 792 25.0 140 246 320 Rc 1/2 Rc 1/2
150-250/1504 150 220 221 270 M20 350 320 -- 440 370 330 1018 798 25.0 140 246 320 Rc 1/2 Rc 1/2
150-250/1854 150 220 221 270 M20 350 363 -- 515 370 330 1076 856 25.0 140 246 320 Rc 1/2 Rc 1/2
150-250/2204 150 220 221 270 M20 350 363 -- 515 370 330 1076 856 25.0 140 246 320 Rc 1/2 Rc 1/2
150-250/3004 150 220 221 270 M20 400 402 -- 555 370 330 1135 915 25.0 140 246 450 Rc 1/2 Rc 1/2
150-250/3704 150 220 221 270 M20 450 442 -- 670 370 330 1185 965 25.0 140 270 450 Rc 1/2 Rc 1/2
150-250/4504 150 220 221 270 M20 450 442 -- 670 370 330 1215 995 25.0 140 270 450 Rc 1/2 Rc 1/2
200-250/1854 200 222 235 299 M20 350 363 -- 515 400 400 1131 909 25.0 140 299 320 Rc 1/2 Rc 1/2
200-250/2204 200 222 235 299 M20 350 363 -- 515 400 400 1131 909 25.0 140 299 320 Rc 1/2 Rc 1/2
200-250/3004 200 222 235 299 M20 400 402 -- 555 400 400 1190 968 25.0 140 299 450 Rc 1/2 Rc 1/2
200-250/3704 200 222 235 299 M20 450 442 -- 670 400 400 1240 1018 25.0 140 323 450 Rc 1/2 Rc 1/2
200-250/4504 200 222 235 299 M20 450 442 -- 670 400 400 1270 1048 25.0 140 323 450 Rc 1/2 Rc 1/2
200-315/3004 200 225 255 313 M20 400 402 -- 555 410 410 1212 987 25.0 140 318 450 Rc 1/2 Rc 1/2
200-315/3704 200 225 255 313 M20 450 442 -- 670 410 410 1268 1043 25.0 140 348 450 Rc 1/2 Rc 1/2
200-315/4504 200 225 255 313 M20 450 442 -- 670 410 410 1298 1073 25.0 140 348 450 Rc 1/2 Rc 1/2

14
 Etaline PumpDrive

Horizontal Installation
If the direction of flow is from top to bottom, the motor must be turned by 180° so that the frequency inverter remains in its position on
top.

If flexible pipe joints are used, Etaline PumpDrive has

to be additionally fixed.

Dismantling the Pull-out Unit Support

Motors of size 160 and above on Etaline

PumpDrive units with horizontal motor axis
need to be adequately supported. The foot
fixing holes on the motor housing can be
used for this purpose.

Vertical Installation
Pump sizes Etaline PD 32-160/.. to 100-160/.. to be mounted on a baseplate are fixed by three steel angle feet.
Pump sizes 100-170/.. to 200-315/.. are fixed by a cast iron (GJL) pump foot (separate accessory).
If the pump set is installed vertically, the pump must be vented through vent valve B5 so as to avoid dry running of the mechanical
seal.

View Z
Foundation
fixing elements

Foundation
fixing elements

Pump fixing
elements Foundation fixing
elements

With cast iron With three angle feet

pump foot
For 4 bolts M12

15
 Etaline PumpDrive

2-pole Models
Etaline Design
PumpDrive
Advanced GN 6 GN 11
without with without with
diff. pressure sensor diff. pressure sensor (X) diff. pressure sensor diff. pressure sensor (X)
32-160/302 PDA(X) 48 877 699 48 877 848 48 878 295 48 878 444
32-160/402 PDA(X) 48 877 700 48 877 849 48 878 296 48 878 445
32-160/552 PDA(X) 48 877 701 48 877 850 48 878 297 48 878 446
32-160/752 PDA(X) 48 877 702 48 877 851 48 878 298 48 878 447
32-160/1102 PDA(X) 48 877 703 48 877 852 48 878 299 48 878 448
32-200/552 PDA(X) 48 877 704 48 877 853 48 878 300 48 878 449
32-200/752 PDA(X) 48 877 705 48 877 854 48 878 301 48 878 450
32-200/1102 PDA(X) 48 877 706 48 877 855 48 878 302 48 878 451
32-200/1502 PDA(X) 48 877 707 48 877 856 48 878 303 48 878 452
32-200/1852 PDA(X)
40-160/402 PDA(X) 48 877 708 48 877 857 48 878 304 48 878 453
40-160/552 PDA(X) 48 877 709 48 877 858 48 878 305 48 878 454
40-160/752 PDA(X) 48 877 710 48 877 859 48 878 306 48 878 455
40-160/1102 PDA(X) 48 877 711 48 877 860 48 878 307 48 878 456
40-160/1502 PDA(X)
40-250/1102 PDA(X) 48 877 712 48 877 861 48 878 308 48 878 457
40-250/1502 PDA(X) 48 877 713 48 877 862 48 878 309 48 878 458
40-250/1852 PDA(X) 48 877 714 48 877 863 48 878 310 48 878 459
40-250/2202 PDA(X) 48 877 715 48 877 864 48 878 311 48 878 460
50-160/552 PDA(X) 48 877 716 48 877 865 48 878 312 48 878 461
50-160/752 PDA(X) 48 877 717 48 877 866 48 878 313 48 878 462
50-160/1102 PDA(X) 48 877 718 48 877 867 48 878 314 48 878 463
50-160/1502 PDA(X) 48 877 719 48 877 868 48 878 315 48 878 464
50-160/1852 PDA(X) 48 877 720 48 877 869 48 878 316 48 878 465
50-160/2202 PDA(X) 48 877 721 48 877 870 48 878 317 48 878 466
50-160/3002 PDA(X)
50-250/1502 PDA(X) 48 877 722 48 877 871 48 878 318 48 878 467
50-250/1852 PDA(X) 48 877 723 48 877 872 48 878 319 48 878 468
50-250/2202 PDA(X) 48 877 724 48 877 873 48 878 320 48 878 469
50-250/3002 PDA(X)
65-160/752 PDA(X) 48 877 725 48 877 874 48 878 321 48 878 470
65-160/1102 PA(X)D 48 877 726 48 877 875 48 878 322 48 878 471
65-160/1502 PDA(X) 48 877 727 48 877 876 48 878 323 48 878 472
65-160/1852 PDA(X) 48 877 728 48 877 877 48 878 324 48 878 473
65-160/2202 PDA(X) 48 877 729 48 877 878 48 878 325 48 878 474
65-160/3002 PDA(X)
65-160/3702 PDA(X)
65-250/1852 PDA(X)
65-250/2202 PDA(X)
65-250/3002 PDA(X)
65-250/3702 PDA(X)
80-160/752 PDA(X) 48 877 730 48 877 879 48 878 326 48 878 475
80-160/1102 PDA(X) 48 877 731 48 877 880 48 878 327 48 878 476
80-160/1502 PDA(X) 48 877 732 48 877 881 48 878 328 48 878 477
80-160/1852 PDA(X) 48 877 733 48 877 882 48 878 329 48 878 478
80-160/2202 PDA(X) 48 877 734 48 877 883 48 878 330 48 878 479
80-160/3002 PDA(X)
80-160/3702 PDA(X)
80-210/1852 PDA(X)
80-210/2202 PDA(X)
80-210/3002 PDA(X)
80-210/3702 PDA(X)
80-250/3002 PDA(X)
80-250/3702 PDA(X)
80-250/4502 PDA(X)

16
 Etaline PumpDrive

2-pole Models
Etaline Design
PumpDrive
Advanced GN 6 GN 11
without with without with
diff. pressure sensor diff. pressure sensor (X) diff. pressure sensor diff. pressure sensor (X)
100-125/552 PDA(X) 48 877 735 48 877 884 48 878 331 48 878 480
100-125/752 PDA(X) 48 877 736 48 877 885 48 878 332 48 878 481
100-125/1102 PDA(X) 48 877 737 48 877 886 48 878 333 48 878 482
100-125/1502 PDA(X) 48 877 738 48 877 887 48 878 334 48 878 483
100-125/1852 PDA(X) 48 877 739 48 877 888 48 878 335 48 878 484
100-125/2202 PDA(X) 48 877 740 48 877 889 48 878 336 48 878 485
100-160/752 PDA(X) 48 877 741 48 877 890 48 878 337 48 878 486
100-160/1102 PDA(X) 48 877 742 48 877 891 48 878 338 48 878 487
100-160/1502 PDA(X) 48 877 743 48 877 892 48 878 339 48 878 488
100-160/1852 PDA(X) 48 877 744 48 877 893 48 878 340 48 878 489
100-160/2202 PDA(X) 48 877 745 48 877 894 48 878 341 48 878 490
100-160/3002 PDA(X)
100-160/3702 PDA(X)
100-170/1102 PDA(X) 48 877 746 48 877 895 48 878 342 48 878 491
100-170/1502 PDA(X) 48 877 747 48 877 896 48 878 343 48 878 492
100-170/1852 PDA(X) 48 877 748 48 877 897 48 878 344 48 878 493
100-170/2202 PDA(X) 48 877 749 48 877 898 48 878 345 48 878 494
100-170/3002 PDA(X)
100-170/3702 PDA(X)
100-200/3002 PDA(X)
100-200/3702 PDA(X)
100-200/4502 PDA(X)
100-250/4502 PDA(X)
125-160/2202 PDA(X)
125-160/3002 PDA(X)
125-160/3702 PDA(X)
125-160/4502 PDA(X)
125-200/3702 PDA(X)
125-200/4502 PDA(X)

17
 Etaline PumpDrive

2-pole Models
Etaline Design
PumpDrive
Basic GN 6 GN 11
without with without with
diff. pressure sensor diff. pressure sensor (X) diff. pressure sensor diff. pressure sensor (X)
32-160/302 PDB(X) 48 877 401 48 877 550 48 877 997 48 878 146
32-160/402 PDB(X) 48 877 402 48 877 551 48 877 998 48 878 147
32-160/552 PDB(X) 48 877 403 48 877 552 48 877 999 48 878 148
32-160/752 PDB(X) 48 877 404 48 877 553 48 878 000 48 878 149
32-160/1102 PDB(X) 48 877 405 48 877 554 48 878 001 48 878 150
32-200/552 PDB(X) 48 877 406 48 877 555 48 878 002 48 878 151
32-200/752 PDB(X) 48 877 407 48 877 556 48 878 003 48 878 152
32-200/1102 PDB(X) 48 877 408 48 877 557 48 878 004 48 878 153
32-200/1502 PDB(X) 48 877 409 48 877 558 48 878 005 48 878 154
32-200/1852 PDB(X)
40-160/402 PDB(X) 48 877 410 48 877 559 48 878 006 48 878 155
40-160/552 PDB(X) 48 877 411 48 877 560 48 878 007 48 878 156
40-160/752 PDB(X) 48 877 412 48 877 561 48 878 008 48 878 157
40-160/1102 PDB(X) 48 877 413 48 877 562 48 878 009 48 878 158
40-160/1502 PDB(X)
40-250/1102 PDB(X) 48 877 414 48 877 563 48 878 010 48 878 159
40-250/1502 PDB(X) 48 877 415 48 877 564 48 878 011 48 878 160
40-250/1852 PDB(X) 48 877 416 48 877 565 48 878 012 48 878 161
40-250/2202 PDB(X) 48 877 417 48 877 566 48 878 013 48 878 162
50-160/552 PDB(X) 48 877 418 48 877 567 48 878 014 48 878 163
50-160/752 PDB(X) 48 877 419 48 877 568 48 878 015 48 878 164
50-160/1102 PDB(X) 48 877 420 48 877 569 48 878 016 48 878 165
50-160/1502 PDB(X) 48 877 421 48 877 570 48 878 017 48 878 166
50-160/1852 PDB(X) 48 877 422 48 877 571 48 878 018 48 878 167
50-160/2202 PDB(X) 48 877 423 48 877 572 48 878 019 48 878 168
50-160/3002 PDB(X)
50-250/1502 PDB(X) 48 877 424 48 877 573 48 878 020 48 878 169
50-250/1852 PDB(X) 48 877 425 48 877 574 48 878 021 48 878 170
50-250/2202 PDB(X) 48 877 426 48 877 575 48 878 022 48 878 171
50-250/3002 PDB(X)
65-160/752 PDB(X) 48 877 427 48 877 576 48 878 023 48 878 172
65-160/1102 PDB(X) 48 877 428 48 877 577 48 878 024 48 878 173
65-160/1502 PDB(X) 48 877 429 48 877 578 48 878 025 48 878 174
65-160/1852 PDB(X) 48 877 430 48 877 579 48 878 026 48 878 175
65-160/2202 PDB(X) 48 877 431 48 877 580 48 878 027 48 878 176
65-160/3002 PDB(X)
65-160/3702 PDB(X)
65-250/1852 PDB(X)
65-250/2202 PDB(X)
65-250/3002 PDB(X)
65-250/3702 PDB(X)
80-160/752 PDB(X) 48 877 432 48 877 581 48 878 028 48 878 177
80-160/1102 PDB(X) 48 877 433 48 877 582 48 878 029 48 878 178
80-160/1502 PDB(X) 48 877 434 48 877 583 48 878 030 48 878 179
80-160/1852 PDB(X) 48 877 435 48 877 584 48 878 031 48 878 180
80-160/2202 PDB(X) 48 877 436 48 877 585 48 878 032 48 878 181
80-160/3002 PDB(X)
80-160/3702 PDB(X)
80-210/1852 PDB(X)
80-210/2202 PDB(X)
80-210/3002 PDB(X)
80-210/3702 PDB(X)
80-250/3002 PDB(X)
80-250/3702 PDB(X)
80-250/4502 PDB(X)

18
 Etaline PumpDrive

2-pole Models
Etaline Design
PumpDrive
Basic GN 6 GN 11
without with without with
diff. pressure sensor diff. pressure sensor (X) diff. pressure sensor diff. pressure sensor (X)
100-125/552 PDB(X) 48 877 437 48 877 586 48 878 033 48 878 182
100-125/752 PDB(X) 48 877 438 48 877 587 48 878 034 48 878 183
100-125/1102 PDB(X) 48 877 439 48 877 588 48 878 035 48 878 184
100-125/1502 PDB(X) 48 877 440 48 877 589 48 878 036 48 878 185
100-125/1852 PDB(X) 48 877 441 48 877 590 48 878 037 48 878 186
100-125/2202 PDB(X) 48 877 442 48 877 591 48 878 038 48 878 187
100-160/752 PDB(X) 48 877 443 48 877 592 48 878 039 48 878 188
100-160/1102 PDB(X) 48 877 444 48 877 593 48 878 040 48 878 189
100-160/1502 PDB(X) 48 877 445 48 877 594 48 878 041 48 878 190
100-160/1852 PDB(X) 48 877 446 48 877 595 48 878 042 48 878 191
100-160/2202 PDB(X) 48 877 447 48 877 596 48 878 043 48 878 192
100-160/3002 PDB(X)
100-160/3702 PDB(X)
100-170/1102 PDB(X) 48 877 448 48 877 597 48 878 044 48 878 193
100-170/1502 PDB(X) 48 877 449 48 877 598 48 878 045 48 878 194
100-170/1852 PDB(X) 48 877 450 48 877 599 48 878 046 48 878 195
100-170/2202 PDB(X) 48 877 451 48 877 600 48 878 047 48 878 196
100-170/3002 PDB(X)
100-170/3702 PDB(X)
100-200/3002 PDB(X)
100-200/3702 PDB(X)
100-200/4502 PDB(X)
100-250/4502 PDB(X)
125-160/2202 PDB(X)
125-160/3002 PDB(X)
125-160/3702 PDB(X)
125-160/4502 PDB(X)
125-200/3702 PDB(X)
125-200/4502 PDB(X)

19
 Etaline PumpDrive

4-pole Models
Etaline Design
PumpDrive
Advanced GN 6 GN 11
without with without with
diff. pressure sensor diff. pressure sensor (X) diff. pressure sensor diff. pressure sensor (X)
32-160/054 PDA(X) 48 877 750 48 877 899 48 878 346 48 878 495
32-160/074 PDA(X) 48 877 751 48 877 900 48 878 347 48 878 496
32-160/114 PDA(X) 48 877 752 48 877 901 48 878 348 48 878 497
32-160/154 PDA(X) 48 877 753 48 877 902 48 878 349 48 878 498
32-160/224 PDA(X)
32-200/114 PDA(X) 48 877 754 48 877 903 48 878 350 48 878 499
32-200/154 PDA(X) 48 877 755 48 877 904 48 878 351 48 878 500
32-200/224 PDA(X) 48 877 756 48 877 905 48 878 352 48 878 501
32-200/304 PDA(X) 48 877 757 48 877 906 48 878 353 48 878 502
32-200/404 PDA(X)
40-160/054 PDA(X) 48 877 758 48 877 907 48 878 354 48 878 503
40-160/074 PDA(X) 48 877 759 48 877 908 48 878 355 48 878 504
40-160/114 PDA(X) 48 877 760 48 877 909 48 878 356 48 878 505
40-160/154 PDA(X) 48 877 761 48 877 910 48 878 357 48 878 506
40-160/224 PDA(X)
40-250/224 PDA(X) 48 877 762 48 877 911 48 878 358 48 878 507
40-250/304 PDA(X) 48 877 763 48 877 912 48 878 359 48 878 508
40-250/404 PDA(X) 48 877 764 48 877 913 48 878 360 48 878 509
40-250/554 PDA(X) 48 877 765 48 877 914 48 878 361 48 878 510
40-250/754 PDA(X) 48 877 766 48 877 915 48 878 362 48 878 511
40-250/1104 PDA(X)
50-160/114 PDA(X) 48 877 767 48 877 916 48 878 363 48 878 512
50-160/154 PDA(X) 48 877 768 48 877 917 48 878 364 48 878 513
50-160/224 PDA(X) 48 877 769 48 877 918 48 878 365 48 878 514
50-160/304 PDA(X) 48 877 770 48 877 919 48 878 366 48 878 515
50-160/404 PDA(X)
50-250/304 PDA(X) 48 877 771 48 877 920 48 878 367 48 878 516
50-250/404 PDA(X) 48 877 772 48 877 921 48 878 368 48 878 517
50-250/554 PDA(X) 48 877 773 48 877 922 48 878 369 48 878 518
50-250/754 PDA(X) 48 877 774 48 877 923 48 878 370 48 878 519
50-250/1104 PDA(X) 48 877 775 48 877 924 48 878 371 48 878 520
65-160/154 PDA(X) 48 877 776 48 877 925 48 878 372 48 878 521
65-160/224 PDA(X) 48 877 777 48 877 926 48 878 373 48 878 522
65-160/304 PDA(X) 48 877 778 48 877 927 48 878 374 48 878 523
65-160/404 PDA(X) 48 877 779 48 877 928 48 878 375 48 878 524
65-160/554 PDA(X)
65-250/304 PDA(X) 48 877 780 48 877 929 48 878 376 48 878 525
65-250/404 PDA(X) 48 877 781 48 877 930 48 878 377 48 878 526
65-250/554 PDA(X) 48 877 782 48 877 931 48 878 378 48 878 527
65-250/754 PDA(X) 48 877 783 48 877 932 48 878 379 48 878 528
65-250/1104 PDA(X) 48 877 784 48 877 933 48 878 380 48 878 529
65-250/1504 PDA(X)
80-160/154 PDA(X) 48 877 785 48 877 934 48 878 381 48 878 530
80-160/224 PDA(X) 48 877 786 48 877 935 48 878 382 48 878 531
80-160/304 PDA(X) 48 877 787 48 877 936 48 878 383 48 878 532
80-160/404 PDA(X) 48 877 788 48 877 937 48 878 384 48 878 533
80-160/554 PDA(X) 48 877 789 48 877 938 48 878 385 48 878 534
80-160/754 PDA(X)
80-210/404 PDA(X) 48 877 790 48 877 939 48 878 386 48 878 535
80-210/554 PDA(X) 48 877 791 48 877 940 48 878 387 48 878 536
80-210/754 PDA(X) 48 877 792 48 877 941 48 878 388 48 878 537
80-210/1104 PDA(X) 48 877 793 48 877 942 48 878 389 48 878 538
80-210/1504 PDA(X)

20
 Etaline PumpDrive

4-pole Models
Etaline Design
PumpDrive
Advanced GN 6 GN 11
without with without with
diff. pressure sensor diff. pressure sensor (X) diff. pressure sensor diff. pressure sensor (X)
80-250/554 PDA(X) 48 877 794 48 877 943 48 878 390 48 878 539
80-250/754 PDA(X) 48 877 795 48 877 944 48 878 391 48 878 540
80-250/1104 PDA(X) 48 877 796 48 877 945 48 878 392 48 878 541
80-250/1504 PDA(X) 48 877 797 48 877 946 48 878 393 48 878 542
80-250/1854 PDA(X)
80-250/2204 PDA(X)
100-125/154 PDA(X) 48 877 798 48 877 947 48 878 394 48 878 543
100-125/224 PDA(X) 48 877 799 48 877 948 48 878 395 48 878 544
100-125/304 PDA(X) 48 877 800 48 877 949 48 878 396 48 878 545
100-125/404 PDA(X)
100-160/154 PDA(X) 48 877 801 48 877 950 48 878 397 48 878 546
100-160/224 PDA(X) 48 877 802 48 877 951 48 878 398 48 878 547
100-160/304 PDA(X) 48 877 803 48 877 952 48 878 399 48 878 548
100-160/404 PDA(X) 48 877 804 48 877 953 48 878 400 48 878 549
100-160/554 PDA(X) 48 877 805 48 877 954 48 878 401 48 878 550
100-160/754 PDA(X) 48 877 806 48 877 955 48 878 402 48 878 551
100-170/224 PDA(X) 48 877 807 48 877 956 48 878 403 48 878 552
100-170/304 PDA(X) 48 877 808 48 877 957 48 878 404 48 878 553
100-170/404 PDA(X) 48 877 809 48 877 958 48 878 405 48 878 554
100-170/554 PDA(X) 48 877 810 48 877 959 48 878 406 48 878 555
100-170/754 PDA(X) 48 877 811 48 877 960 48 878 407 48 878 556
100-170/1104 PDA(X) 48 877 812 48 877 961 48 878 408 48 878 557
100-200/404 PDA(X) 48 877 813 48 877 962 48 878 409 48 878 558
100-200/554 PDA(X) 48 877 814 48 877 963 48 878 410 48 878 559
100-200/754 PDA(X) 48 877 815 48 877 964 48 878 411 48 878 560
100-200/1104 PDA(X) 48 877 816 48 877 965 48 878 412 48 878 561
100-200/1504 PDA(X) 48 877 817 48 877 966 48 878 413 48 878 562
100-200/1854 PDA(X) 48 877 818 48 877 967 48 878 414 48 878 563
100-200/2204 PDA(X)
100-250/754 PDA(X) 48 877 819 48 877 968 48 878 415 48 878 564
100-250/1104 PDA(X) 48 877 820 48 877 969 48 878 416 48 878 565
100-250/1504 PDA(X) 48 877 821 48 877 970 48 878 417 48 878 566
100-250/1854 PDA(X) 48 877 822 48 877 971 48 878 418 48 878 567
100-250/2204 PDA(X) 48 877 823 48 877 972 48 878 419 48 878 568
100-250/3004 PDA(X)
100-250/3704 PDA(X)
125-160/404 PDA(X) 48 877 824 48 877 973 48 878 420 48 878 569
125-160/554 PDA(X) 48 877 825 48 877 974 48 878 421 48 878 570
125-160/754 PDA(X) 48 877 826 48 877 975 48 878 422 48 878 571
125-160/1104 PDA(X) 48 877 827 48 877 976 48 878 423 48 878 572
125-160/1504 PDA(X)
125-200/554 PDA(X) 48 877 828 48 877 977 48 878 424 48 878 573
125-200/754 PDA(X) 48 877 829 48 877 978 48 878 425 48 878 574
125-200/1104 PDA(X) 48 877 830 48 877 979 48 878 426 48 878 575
125-200/1504 PDA(X) 48 877 831 48 877 980 48 878 427 48 878 576
125-200/1854 PDA(X) 48 877 832 48 877 981 48 878 428 48 878 577
125-200/2204 PDA(X) 48 877 833 48 877 982 48 878 429 48 878 578
125-200/3004 PDA(X)
125-250/754 PDA(X) 48 877 834 48 877 983 48 878 430 48 878 579
125-250/1104 PDA(X) 48 877 835 48 877 984 48 878 431 48 878 580
125-250/1504 PDA(X) 48 877 836 48 877 985 48 878 432 48 878 581
125-250/1854 PDA(X) 48 877 837 48 877 986 48 878 433 48 878 582
125-250/2204 PDA(X) 48 877 838 48 877 987 48 878 434 48 878 583
125-250/3004 PDA(X)
125-250/3704 PDA(X)
125-250/4504 PDA(X)

21
 Etaline PumpDrive

4-pole Models
Etaline Design
PumpDrive
Advanced GN 6 GN 11
without with without with
diff. pressure sensor diff. pressure sensor (X) diff. pressure sensor diff. pressure sensor (X)
150-200/754 PDA(X) 48 877 839 48 877 988 48 878 435 48 878 584
150-200/1104 PDA(X) 48 877 840 48 877 989 48 878 436 48 878 585
150-200/1504 PDA(X) 48 877 841 48 877 990 48 878 437 48 878 586
150-200/1854 PDA(X) 48 877 842 48 877 991 48 878 438 48 878 587
150-200/2204 PDA(X) 48 877 843 48 877 992 48 878 439 48 878 588
150-200/3004 PDA(X)
150-200/3704 PDA(X)
150-200/4504 PDA(X)
150-250/1104 PDA(X) 48 877 844 48 877 993 48 878 440 48 878 589
150-250/1504 PDA(X) 48 877 845 48 877 994 48 878 441 48 878 590
150-250/1854 PDA(X) 48 877 846 48 877 995 48 878 442 48 878 591
150-250/2204 PDA(X) 48 877 847 48 877 996 48 878 443 48 878 592
150-250/3004 PDA(X)
150-250/3704 PDA(X)
150-250/4504 PDA(X)
200-250/1854 PDA(X)
200-250/2204 PDA(X)
200-250/3004 PDA(X)
200-250/3704 PDA(X)
200-250/4504 PDA(X)
200-315/3004 PDA(X)
200-315/3704 PDA(X)
200-315/4504 PDA(X)

22
 Etaline PumpDrive

4-pole Models
Etaline Design
PumpDrive
Basic GN 6 GN 11
without with without with
diff. pressure sensor diff. pressure sensor (X) diff. pressure sensor diff. pressure sensor (X)
32-160/054 PDB(X) 48 877 452 48 877 601 48 878 048 48 878 197
32-160/074 PDB(X) 48 877 453 48 877 602 48 878 049 48 878 198
32-160/114 PDB(X) 48 877 454 48 877 603 48 878 050 48 878 199
32-160/154 PDB(X) 48 877 455 48 877 604 48 878 051 48 878 200
32-160/224 PDB(X)
32-200/114 PDB(X) 48 877 456 48 877 605 48 878 052 48 878 201
32-200/154 PDB(X) 48 877 457 48 877 606 48 878 053 48 878 202
32-200/224 PDB(X) 48 877 458 48 877 607 48 878 054 48 878 203
32-200/304 PDB(X) 48 877 459 48 877 608 48 878 055 48 878 204
32-200/404 PDB(X)
40-160/054 PDB(X) 48 877 460 48 877 609 48 878 056 48 878 205
40-160/074 PDB(X) 48 877 461 48 877 610 48 878 057 48 878 206
40-160/114 PDB(X) 48 877 462 48 877 611 48 878 058 48 878 207
40-160/154 PDB(X) 48 877 463 48 877 612 48 878 059 48 878 208
40-160/224 PDB(X)
40-250/224 PDB(X) 48 877 464 48 877 613 48 878 060 48 878 209
40-250/304 PDB(X) 48 877 465 48 877 614 48 878 061 48 878 210
40-250/404 PDB(X) 48 877 466 48 877 615 48 878 062 48 878 211
40-250/554 PDB(X) 48 877 467 48 877 616 48 878 063 48 878 212
40-250/754 PDB(X) 48 877 468 48 877 617 48 878 064 48 878 213
40-250/1104 PDB(X)
50-160/114 PDB(X) 48 877 469 48 877 618 48 878 065 48 878 214
50-160/154 PDB(X) 48 877 470 48 877 619 48 878 066 48 878 215
50-160/224 PDB(X) 48 877 471 48 877 620 48 878 067 48 878 216
50-160/304 PDB(X) 48 877 472 48 877 621 48 878 068 48 878 217
50-160/404 PDB(X)
50-250/304 PDB(X) 48 877 473 48 877 622 48 878 069 48 878 218
50-250/404 PDB(X) 48 877 474 48 877 623 48 878 070 48 878 219
50-250/554 PDB(X) 48 877 475 48 877 624 48 878 071 48 878 220
50-250/754 PDB(X) 48 877 476 48 877 625 48 878 072 48 878 221
50-250/1104 PDB(X) 48 877 477 48 877 626 48 878 073 48 878 222
65-160/154 PDB(X) 48 877 478 48 877 627 48 878 074 48 878 223
65-160/224 PDB(X) 48 877 479 48 877 628 48 878 075 48 878 224
65-160/304 PDB(X) 48 877 480 48 877 629 48 878 076 48 878 225
65-160/404 PDB(X) 48 877 481 48 877 630 48 878 077 48 878 226
65-160/554 PDB(X)
65-250/304 PDB(X) 48 877 482 48 877 631 48 878 078 48 878 227
65-250/404 PDB(X) 48 877 483 48 877 632 48 878 079 48 878 228
65-250/554 PDB(X) 48 877 484 48 877 633 48 878 080 48 878 229
65-250/754 PDB(X) 48 877 485 48 877 634 48 878 081 48 878 230
65-250/1104 PDB(X) 48 877 486 48 877 635 48 878 082 48 878 231
65-250/1504 PDB(X)
80-160/154 PDB(X) 48 877 487 48 877 636 48 878 083 48 878 232
80-160/224 PDB(X) 48 877 488 48 877 637 48 878 084 48 878 233
80-160/304 PDB(X) 48 877 489 48 877 638 48 878 085 48 878 234
80-160/404 PDB(X) 48 877 490 48 877 639 48 878 086 48 878 235
80-160/554 PDB(X) 48 877 491 48 877 640 48 878 087 48 878 236
80-160/754 PDB(X)
80-210/404 PDB(X) 48 877 492 48 877 641 48 878 088 48 878 237
80-210/554 PDB(X) 48 877 493 48 877 642 48 878 089 48 878 238
80-210/754 PDB(X) 48 877 494 48 877 643 48 878 090 48 878 239
80-210/1104 PDB(X) 48 877 495 48 877 644 48 878 091 48 878 240
80-210/1504 PDB(X)

23
 Etaline PumpDrive

4-pole Models
Etaline Design
PumpDrive
Basic GN 6 GN 11
without with without with
diff. pressure sensor diff. pressure sensor (X) diff. pressure sensor diff. pressure sensor (X)
80-250/554 PDB(X) 48 877 496 48 877 645 48 878 092 48 878 241
80-250/754 PDB(X) 48 877 497 48 877 646 48 878 093 48 878 242
80-250/1104 PDB(X) 48 877 498 48 877 647 48 878 094 48 878 243
80-250/1504 PDB(X) 48 877 499 48 877 648 48 878 095 48 878 244
80-250/1854 PDB(X)
80-250/2204 PDB(X)
100-125/154 PDB(X) 48 877 500 48 877 649 48 878 096 48 878 245
100-125/224 PDB(X) 48 877 501 48 877 650 48 878 097 48 878 246
100-125/304 PDB(X) 48 877 502 48 877 651 48 878 098 48 878 247
100-125/404 PDB(X)
100-160/154 PDB(X) 48 877 503 48 877 652 48 878 099 48 878 248
100-160/224 PDB(X) 48 877 504 48 877 653 48 878 100 48 878 249
100-160/304 PDB(X) 48 877 505 48 877 654 48 878 101 48 878 250
100-160/404 PDB(X) 48 877 506 48 877 655 48 878 102 48 878 251
100-160/554 PDB(X) 48 877 507 48 877 656 48 878 103 48 878 252
100-160/754 PDB(X) 48 877 508 48 877 657 48 878 104 48 878 253
100-170/224 PDB(X) 48 877 509 48 877 658 48 878 105 48 878 254
100-170/304 PDB(X) 48 877 510 48 877 659 48 878 106 48 878 255
100-170/404 PDB(X) 48 877 511 48 877 660 48 878 107 48 878 256
100-170/554 PDB(X) 48 877 512 48 877 661 48 878 108 48 878 257
100-170/754 PDB(X) 48 877 513 48 877 662 48 878 109 48 878 258
100-170/1104 PDB(X) 48 877 514 48 877 663 48 878 110 48 878 259
100-200/404 PDB(X) 48 877 515 48 877 664 48 878 111 48 878 260
100-200/554 PDB(X) 48 877 516 48 877 665 48 878 112 48 878 261
100-200/754 PDB(X) 48 877 517 48 877 666 48 878 113 48 878 262
100-200/1104 PDB(X) 48 877 518 48 877 667 48 878 114 48 878 263
100-200/1504 PDB(X) 48 877 519 48 877 668 48 878 115 48 878 264
100-200/1854 PDB(X) 48 877 520 48 877 669 48 878 116 48 878 265
100-200/2204 PDB(X)
100-250/754 PDB(X) 48 877 521 48 877 670 48 878 117 48 878 266
100-250/1104 PDB(X) 48 877 522 48 877 671 48 878 118 48 878 267
100-250/1504 PDB(X) 48 877 523 48 877 672 48 878 119 48 878 268
100-250/1854 PDB(X) 48 877 524 48 877 673 48 878 120 48 878 269
100-250/2204 PDB(X) 48 877 525 48 877 674 48 878 121 48 878 270
100-250/3004 PDB(X)
100-250/3704 PDB(X)
125-160/404 PDB(X) 48 877 526 48 877 675 48 878 122 48 878 271
125-160/554 PDB(X) 48 877 527 48 877 676 48 878 123 48 878 272
125-160/754 PDB(X) 48 877 528 48 877 677 48 878 124 48 878 273
125-160/1104 PDB(X) 48 877 529 48 877 678 48 878 125 48 878 274
125-160/1504 PDB(X)
125-200/554 PDB(X) 48 877 530 48 877 679 48 878 126 48 878 275
125-200/754 PDB(X) 48 877 531 48 877 680 48 878 127 48 878 276
125-200/1104 PDB(X) 48 877 532 48 877 681 48 878 128 48 878 277
125-200/1504 PDB(X) 48 877 533 48 877 682 48 878 129 48 878 278
125-200/1854 PDB(X) 48 877 534 48 877 683 48 878 130 48 878 279
125-200/2204 PDB(X) 48 877 535 48 877 684 48 878 131 48 878 280
125-200/3004 PDB(X)
125-250/754 PDB(X) 48 877 536 48 877 685 48 878 132 48 878 281
125-250/1104 PDB(X) 48 877 537 48 877 686 48 878 133 48 878 282
125-250/1504 PDB(X) 48 877 538 48 877 687 48 878 134 48 878 283
125-250/1854 PDB(X) 48 877 539 48 877 688 48 878 135 48 878 284
125-250/2204 PDB(X) 48 877 540 48 877 689 48 878 136 48 878 285
125-250/3004 PDB(X)
125-250/3704 PDB(X)
125-250/4504 PDB(X)

24
 Etaline PumpDrive

4-pole Models
Etaline Design
PumpDrive
Basic GN 6 GN 11
without with without with
diff. pressure sensor diff. pressure sensor (X) diff. pressure sensor diff. pressure sensor (X)
150-200/754 PDB(X) 48 877 541 48 877 690 48 878 137 48 878 286
150-200/1104 PDB(X) 48 877 542 48 877 691 48 878 138 48 878 287
150-200/1504 PDB(X) 48 877 543 48 877 692 48 878 139 48 878 288
150-200/1854 PDB(X) 48 877 544 48 877 693 48 878 140 48 878 289
150-200/2204 PDB(X) 48 877 545 48 877 694 48 878 141 48 878 290
150-200/3004 PDB(X)
150-200/3704 PDB(X)
150-200/4504 PDB(X)
150-250/1104 PDB(X) 48 877 546 48 877 695 48 878 142 48 878 291
150-250/1504 PDB(X) 48 877 547 48 877 696 48 878 143 48 878 292
150-250/1854 PDB(X) 48 877 548 48 877 697 48 878 144 48 878 293
150-250/2204 PDB(X) 48 877 549 48 877 698 48 878 145 48 878 294
150-250/3004 PDB(X)
150-250/3704 PDB(X)
150-250/4504 PDB(X)
200-250/1854 PDB(X)
200-250/2204 PDB(X)
200-250/3004 PDB(X)
200-250/3704 PDB(X)
200-250/4504 PDB(X)
200-315/3004 PDB(X)
200-315/3704 PDB(X)
200-315/4504 PDB(X)

25
 Etaline PumpDrive

Accessories and Optional Equipment

¶ kg
Pump foot including mounting elements for vertical installation

Etaline Hya-Drive 32-160/... to 100-125/... 1) 47 077 960 2.0

Etaline Hya-Drive 100-170/... to 200-315/... 2) 47 086 291 14.0

1) 3 pump feet
2) 1 pump foot

¶ kg
LON module 47 106 600 0.2
Control panel Basic 47 106 620 0.2
Control panel Advanced 47 106 621 0.2

26
 Etaline PumpDrive

Accessories and Optional Equipement Adapter for mounting on the motor

An adapter is only required if the PumpDrive is to be mounted
Differential pressure sensors on the motor.
Type DE 30
Output signal 4 - 20 mA / three-wire system Size of KSB Ident number
Siemens M
Si Motor
t
Supply voltage 15 - 30 VDC Type V1 / V15 Type B3
Max. working resistance approx. 600 Ohm 71 47 117 519 47 117 519
Max. ambient temperature 40 °C 80 47 117 520 on request
90 47 117 521 47 117 522
Meas. range [bar] Union / Adapter Ident. number 1) 100 47 117 511 47 117 515
0 -- 2.5 Rc 3/8 01 060 209 112M 47 117 512 47 117 512
0 -- 4.0 Rc 3/8 01 060 210 132S 47 117 513 47 117 513
0 -- 6.0 Rc 3/8 01 060 211
160 47 117 514 47 117 514
0 -- 10.0 Rc 3/8 01 076 929
180M 47 117 516 47 117 516
0 -- 2.5 Rc 1/2 01 060 212
200L 47 117 517 47 117 517
0 -- 4.0 Rc 1/2 01 076 930
225M 47 117 518 47 117 518
0 -- 6.0 Rc 1/2 01 076 941
0 -- 10.0 Rc 1/2 01 076 942
1)
Line chokes
complete with retaining plate, spiralled pipe sections and adapter
The line input currents indicated in the project planning informa-
tion are for orientation only; they refer to drive operation at normal
Output filter
rating. These currents may vary depending on the actual line
In order to meet RFI suppression requirements to DIN 55011, the impedance. In low-impedance mains higher currents may occur.
maximum cable lengths specified in the technical data must be
observed. Output filters are required if longer cables are used. Note To limit the line input current, the use of line
chokes is recommended for PumpDrives with
Technical data available on request.
power ratings up to 45 kW.
In addition, the line chokes serve to reduce mains feedback and
to improve the power factor.
The scope of application of DIN EN 6100032 must be heeded.

PumpDrive Three-phase (3~) line choke: IP 00 enclosure; thermal class F; max. ambient temperature 40 °C

Size Power [kW] Ln [mH] In [A] Isat L [mm] B [mm] H [mm] Weight [kg] Ident No.
.. 000K55 .. 0.55
.. 000K75 .. 0.75
.. 001K10 .. 1.10
20
2.0 11 1 5 In
1.5 150 85 150 36
3.6 01 093 105
.. 001K50 .. 1.50
.. 002K20 .. 2.20
.. 004K00 .. 4.00
.. 005K50 .. 5.50
.. 007K50 .. 7.50 1.1 28 1.5 In 180 120 178 8.3 01 093 106
.. 011K00 .. 11.00
.. 015K00 .. 15.00
.. 018K50 .. 18.50 0.5 51 1.5 In 180 135 178 10.5 01 093 107
.. 022K00 .. 22.00
.. 030K00 .. 30.00
.. 037K00 .. 37.00 0.1 100 1.5 In 180 180 180 10.8 01 093 108
.. 045K00 .. 45.00

27
 Etaline PumpDrive

1149.52/2-10 / 1.4.2009 Subject to technical modifications without prior notice.