Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    Sp1668-Ab7702 3 1

    Uploaded by

    Anonymous zQu7SB
    anybus data programming

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sp1668-Ab7702 3 1

    Uploaded by

    Anonymous zQu7SB
    65 views2 pages
    anybus data programming

    Original Title

    SP1668-AB7702_3_1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    anybus data programming

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    65 views2 pages

    Sp1668-Ab7702 3 1

    Uploaded by

    Anonymous zQu7SB
    anybus data programming

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Configuration

    Anybus IPconfig utility


    The Anybus IPconfig utility is a Windows-based configuration utility to set TCP/IP network settings in Anybus devices. It scans
    the Ethernet network for connected devices and allows the user to set the IP address, netmask, default gateway, DNS and
    hostname for each unit.

    Installation Procedure
    1. Go to http://www.anybus.com/products/abxss.shtml and select File/Document Downloads.
    2. Download and install the IPconfig package.

    Scanning for connected devices INSTALLATION GUIDE


    First ensure that you have connected the Anybus units you want to install on the same Ethernet network the PC is connected
    to. Use standard Ethernet cables, straight-through or cross-over cables depending on how you connect to the device.
    When IPconfig is started, it will scan the Ethernet network for Anybus devices. All detected devices will be presented in a list in
    Anybus Modbus-TCP/RTU Gateway
    the main window. To refresh the list, click on Scan.

    Changing IP settings
    To change the IP settings on a detected device, double-click the device in the list of devices. This will open up a dialog in SP1668 3.1
    which you can enter the desired IP configuration. The default password for authentication of the new settings is admin.

    ! Do not enable DHCP if there is no available


    DHCP server on the network.

    Click Set to restart the Anybus device with the new settings applied.
    Test the new settings by opening a web browser and entering the assigned IP address. To discover the assigned IP address
    when using DHCP, simply perform a new scan with the IPconfig utility and locate the device in the list.

    Technical data
    Power Supply: 924 V AC/DC (2W)
    Temperature range: Operating: -40 to +65 C
    Storage: -40 to +85 C E214107
    Humidity range: 595 % RH, non-condensing
    Mounting option: DIN rail (EN 50022)
    HMS Industrial Networks
    CE certification: According to EN 55011:2007 and EN 61000-6-2:2005 Mailing address: Box 4126, 300 04 Halmstad, Sweden E-mail: info@hms-networks.com
    Visiting address: Stationsgatan 37, Halmstad, Sweden Web: www.anybus.com
    SP1668, rev. 3.1, Apr 2016 AB7702-B
    DIN Rail Mounting Connections

    SNAP ON SNAP OFF

    1
    3

    2
    2 Power + RS-485 Serial (Terminal Block)

    1 Pin
    24
    Description
    Vin +
    23 Vin - ! Field wiring terminals must be connected
    with minimum wire size 24 AWG.
    22 Digital Input 2 + (1024 VDC)

    LED Indicators 21
    20
    Digital Input 1 + (1024 VDC)
    Digital Input Common -
    1819 Not used
    17 RS-232 Receive
    16 RS-232 Transmit
    15 Common
    14 RS-485 Line A
    13 RS-485 Line B

    RS-232 Serial Port (D-sub)


    Pin Description
    1 CD (Carrier Detect)
    2 Rx (Receive)
    1 (male) 5
    3 Tx (Transmit)
    Name Color Function
    4 DTR (Data Terminal Ready)
    OFF No power
    5 GND
    Green (steady) Normal operation 6 DSR
    Status 6 9
    Red (steady) Hardware fault 7 RTS (Request To Send)
    Red (flashing) Error during initialization 8 CTS (Clear To Send)
    9 RI (Ring Indicator)
    Green (flashing) Serial Packet receive
    Serial Link Red (flashing) Serial Packet transmit Ethernet Port (RJ-45)
    Orange Boot-up Pin Description
    1 TD+
    Green (flashing) Packet receive
    Activity 2 TD-
    Red (flashing) Ethernet Collision
    3 RD+
    Green (steady) Ethernet network detected, 10Mbps 4, 5, 7, 8 Termination
    Link 1 8
    Orange (steady) Ethernet network detected, 100Mbps 6 RD-

    SP1668, rev. 3.1, Apr 2016 AB7702-B

    You might also like