AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Error Codes & SMTP Status Codes & SMTP

Reply Codes Reference 2010

What is “SMTP Error” ? What does it mean ? There comes a time in the life of a
Computer Consultant where, one day, he/she will have to deal with email server problems. It
is inevitable. Sometimes these problems will be with the interfacing of the mail server with the
ISP, in particular an inability to send mail. After checking the usual suspects such as lack of
connection (your broadband line is dead), faulty router, firewall problems, DNS problems, or
an incorrect SMTP server name (thanks to some clever ISP changing its SMTP server name
without informing anyone – it happens!!), you will likely start delving a little deeper by checking
if your email server reports any errors.

Depending on the actual problem it is encountering, your mail server may not be able to
provide detailed help on how to resolve the problem, and may instead only be able to provide
you with an SMTP Status Code in your server’s log (these codes are also known as SMTP
Error Codes or SMTP Reply Codes), or emails will be returned to the sender with error text.
A classic reply might be, for example, “SMTP error from remote mail server after end of data -
<host ip-address> : 550 Error: Message content rejected”, or “SMTP error from remote mail
server after RCPT TO <email-address>, 550 5.1.1 User unknown” or “SMTP Error: Data not
accepted” or “SMTP Error: The following recipients failed”. It is just for such cases that we
have produced this document (we use it too !! J ). What does 550 mean ? What does 550
5.1.1 mean (or, shortened, what does 511 mean ?) ? What does “Data not accepted” mean ?
What is SMTP error 553, what does it mean ?

So, use this document as a quick reference to common Mail Delivery Errors, SMTP status
codes or SMTP error codes for SMTP mail servers such as AA Mail Server, Alt-N MDaemon,
ArGoSoft Mail Server, Axigen Mail Server, Barracuda Spam Firewall, Chilkat SMTPQ, CMail,
CMailServer, E-Mail Anywhere, FTGate, GMS Mail, Internet Anywhere, Kerio MailServer
(KMS), Lotus Notes, MailEnable, Mailman, MailMax, Mailtraq, Merak Mail Server, Microsoft
Exchange (Exchange Server 2003 NDR, Non-Delivery Report, error codes), Novell
GroupWise, Qmail, PostCast Server, PostConf, PostFix, PowerMTA, QK (QKSoft) SMTP
Server, Rockliffe MailSite, SendMail, SquirrelMail, SurgeMail, TFS Secure Message Server,
VisNetic Mail Server, WinMail, Zimbra, or any other SMTP / ESMTP standards compliant
e-mail MTA.

Note : the following list of SMTP reply codes can also be used to troubleshoot Eudora
or FoxMail email problems, Outlook error codes, Outlook Express error codes
(Windows 2000/XP), Windows Mail Error Codes (Vista), Thunderbird problems, or other
email program problems when those programs send and collect emails directly to and
from the Internet as opposed to through a corporate email system. The error codes
returned are the same.

Finally, there are no better tools for resolving complex SMTP error situations than the
WHOIS, Name Server Lookup, Trace Route, and PING tools of our own
The Ultimate Troubleshooter available on our AnswersThatWork.com website – that is
how we ourselves quickly solve complex SMTP error situations.

Page 1 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

101 – Cannot open SMTP Error 101 : Typically your SMTP server or email
connection program is unable to even start an SMTP session. Typical
replies will be “SMTP Error 101, Error opening connection”
or “SMTP Error 101, cannot open SMTP stream”.
(also called SMTP Error 1.0.1)
All SMTP Error 101 errors usually point to a configuration
problem, such as an incorrectly spelt SMTP server, or an
IP address that does not exist, or an SMTP port that does
not exist or which the recipient will not accept SMTP
connections on, or some other process is already using the
default SMTP port, port 25.

111 – Connection refused SMTP Error 111 : Typically from Linux based email
systems such as SquirrelMail and Mailman. The message
will usually go like this : “Connection refused, 111 Can’t
open SMTP stream”.
(also called SMTP Error 1.1.1)
All SMTP Error 111 errors usually point to an inability of
your server to communicate with the remote SMTP server
(either the recipient’s SMTP server or your ISP’s SMTP
server) or to a Linux/SMTP software configuration problem,
typically /etc/hosts not being world readable, or a
newly installed or reconfigured firewall preventing
connection to the remote SMTP server, or incorrect
hostnames and/or domains (e.g. does your sending
hostname match your IP address in a reverse lookup?), or
exim not running. Telnet and logs should help you home
in on the problem.

211 – System Status SMTP Error 211 : SMTP status 211 prefaces a message
message or System about the Mail Server status or a System Help reply to the
Help Reply user requesting help information. You might for example
issue a command to the mail server to display a list of
(also called SMTP Error 2.1.1) commands you can use and the server replies with an
SMTP Reply 211 followed by the list you requested.

214 – Help Reply message SMTP Error 214 : SMTP status 214 is usually in reply to
the “HELP” command. It displays information about the
(also called SMTP Error 2.1.4) server, usually a URL to the FAQ page of the SMTP
software running on the server. As a result this “error” is
normally called a reply, as in SMTP Reply 214.

220 – <Server Name> SMTP Status 220 : This is normally the first message you
service is running will get back from the server. It means the mail service is
running (ie. your mail server is running). It will normally
contain a welcome message and/or the title of the SMTP
software and, sometimes, the version number of the mail
(also called SMTP Error 2.2.0)
server software. SMTP Reply 220 is effectively a “Hi
There, I have just this second finished starting up – I
am ready to go and at your command” informational
message.

Page 2 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

221 – The domain service is SMTP Error 221 : The server is ending the mail session –
closing the it is closing the conversation with the ISP as it has no more
transmission channel mail to send in this sending session.

SMTP Status 221 is often misconstrued as an error

(also called SMTP Error 2.2.1) condition, when it is in fact nothing of the sort. The mail
server is simply telling you that it has processed everything
it was given in this particular session, and it is now going
back into waiting mode.

Because SMTP status 221 is often misinterpreted, with

some mail servers the Network Administrators have
changed the default text of SMTP Reply 221 to something
more meaningful and less alarming. For example, a typical
SMTP reply 221 might say “221 Goodbye” or
“221 Closing connection”, or the most irritating one we’ve
seen “221 Bye”, Arrrgghh – can you blame anyone for
thinking there might be a problem ? Of course not ! So
some Network Administrators are these days being quite
imaginative by changing the default text of SMTP reply 221
to more user friendly messages like : “221 Thank you for
your business” (I love that one!), or “221 All messages
processed successfully in this session, SMTP connection
is closing”.

250 – Requested mail SMTP Status 250 : The mail server has successfully
action OK completed delivered the message! This is the best SMTP reply (250)
to receive - your message has been accepted and
transmitted OK ! J Yippee.
(also called SMTP Error 2.5.0)
250 is effectively a status code rather than an error code –
there is no such thing as an SMTP error 250.

251 – User not local will SMTP Status 251 : The email account is not local to the
forward ISP server but the ISP server will accept the email and will
forward it (the server will RELAY your message, this is the
most common action for ISP Mail servers – the recipient
(also called SMTP Error 2.5.1) will see your ISP in the mail header as one of the first hops
on the way to the recipient’s email system).

SMTP Error 251 is therefore more of an informational

message for technicians tracking how a message reached
its destination.

Page 3 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

252 – Cannot VRFY (verify) SMTP Status 252 : The user account appears to be valid
the user – the server but could not be verified, however the server will try do
will accept the deliver the message.
message and attempt
to deliver it There are sometimes circumstances where an email
address appears to be valid but cannot be verified as
definitely valid during the SMTP session between the
(also called SMTP Error 2.5.2) sending server (your server) and the next server to accept
your message. This can happen for example in very large
corporation where the first email receiving server might
only be an email exchanger server, a gateway server to
the eventual server which holds the user mailboxes and
which can verify if the intended recipient exists in that
organization. When this happens the gateway server will
reply with an SMTP Error 252 telling your sending server
that it cannot verify the user part of the email address, that
the domain part is OK, and that it will forward your email to
a server which can do the checking and eventually deliver
to the user mailbox if it exists.

354 – Start mail input end SMTP Error 354 : This is normally in response to the
with <CRLF>.<CRLF>, DATA command. The server has received the From and
or, as a less cryptic To information and is now asking for the “Message
description – “FROM Body”, the main part of the message which should be
and TO information ended by two blank lines separated by a dot (period).
received, now please
provide message Therefore, on receiving an SMTP Reply 354 the sending
body and mark its server should send the body of the message to the
end with receiving server and indicate the end of the message body
<CRLF>.<CRLF>” with <CRLF>.<CRLF> (note the full stop between the two
Carriage_Return-Line_Feed’s).

(also called SMTP Error 3.5.4)

Page 4 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

420 – Timeout SMTP Error 420 : In our experience only Novell

communication GroupWise servers use this error (we use GroupWise!).
problem encountered You will get a GroupWise GWIA (GroupWise Internet
during transmission. Agent) 420 TCP Write Error or 420 TCP Read Error if
This is a Novell there are communication problems during transmission of
GroupWise SMTP the actual message after the sending and receiving servers
error have actually connected. A small number of 420 SMTP
errors is normal as occasional peaks of Internet usage may
delay the transmission of an email with attachment so
much that a timeout occurs. When a timeout occurs on a
(also called SMTP Error 4.2.0)
GWIA send, the message is queued up in the
<Domain>\WPGATE\DEFER directory for processing at a
later time (as defined in ConsoleOne or GWIA.CFG).

If you experience 420 errors only with specific

recipient then it is quite likely that the recipient’s anti-
spam firewall does not like your server, your server’s
external IP address, or that your server’s HELO command
uses an outbound identification that does not match your
server’s external IP address (check that your sending
domain’s DNS is set up correctly). In an ideal world a well
behaved recipient server should really be issuing your
GroupWise server with a 554 error rather than timing out
and causing the GroupWise GWIA to fault with a 420 error.

If you experience too many 420 errors with all email

communications, then you have a physical
communication problem somewhere. This could be
your server’s network card, the network point that your
server is plugged into, your switch(es), your router(s),
your firewall, or your Internet line – problems caused by
routers with different MTU sizes is a classic issue. Unless
the logs of all those various problem points can give you
an instant answer, the only way you will get to the bottom
of the problem is to use a packet tracing and inspection
program like Ethereal or Wireshark, its successor, if
you’re running GroupWise on a Windows or Linux server;
on NetWare your only choice is PacketScan which you
can get here
http://support.novell.com/docs/Readmes/InfoDocument/2967287.html.
In the final analysis, if the tracing of packets, and the
changing of hardware does not help then do not discount a
slightly faulty hard disk being the cause of all your
problems (even if your RAID controller or your hard disk
testing software does not detect any problem!).

Page 5 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

421 – <Server name> SMTP Error 421 : The Mail transfer service is
Service not available unavailable because of a transient event. SMTP reply
– the sending email 421 can be caused by many things but generally indicates
program should try that the mail server which returns this status code is
again later currently unavailable but may be available later.

or For example, the server administrator may have stopped

the mail service to troubleshoot a problem, or the mail
The SMTP service server is right in the middle of rebooting, or the mail server
/server you use has a is currently processing too many incoming messages or
limit on the number of incoming requests, etc.... Note : “Mail Server” in this
concurrent SMTP case can be any of the mail servers on the message’s
streams your server route – the sending server (your server), the ISP SMTP
can use server, or the recipient’s mail server.

Clearly, if you repeatedly receive an SMTP status 421 then

the problem is no longer of a transient nature and you
(also called SMTP Error 4.2.1)
need to investigate or inform the relevant network
administrator, ISP tech support, or the recipient.

------------------------------

SMTP Response 421 can also be received as a result of

your message server sending an email where the total
number of TO, CC, and BCC users results in a
number of simultaneous SMTP connections that is in
excess of the number of connections your ISP or
SMTP service allows. A typical error message for this
situation would be : “421 Too many concurrent SMTP
connections from this IP address; please try again later”.
Typically, when this happens your server will have sent
some of the messages (note that for all servers, each
email sent by a user always gets broken down into
individual separate emails to each of the recipients in the
TO, CC, and BC fields), and will automatically retry a little
later to send the remaining messages.

422 – The recipient’s SMTP Error 422 : Either the recipient’s mailbox is over its
mailbox is over its storage limit or the message delivery directory (folder) on
storage limit the recipient’s mail server is currently over a size limit
imposed by the Network Administrator (e.g. possibly as a
or result of the mail server having been down for some time,
having been repaired, and currently in the process of
The size of the collecting thousands of queued up messages).
message exceeds the
recipient’s size limits However, SMTP response 422 can also be received if the
for incoming emails email being sent is larger than the incoming emails size
limit in operation at the recipient’s mail server (particularly
when that recipient’s mail server is Exchange Server).
(also called SMTP Error 4.2.2)

431 – The recipient’s mail SMTP Error 431 : The recipient’s mail server is
server is experiencing experiencing a Disk Full error condition, or an Out of
a Disk Full condition Memory (too many file handles) error condition (Microsoft
Exchange).
(also called SMTP Error 4.3.1)

Page 6 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

432 – The recipient’s SMTP Error 432 : This is an SMTP status response
Exchange Server specific to Microsoft Exchange Server. It indicates that the
incoming mail queue recipient’s mail queue on their Exchange Server has been
has been stopped stopped (frozen), probably while the Network Administrator
troubleshoots some problem.
(also called SMTP Error 4.3.2)

441 – The recipient’s server SMTP Error 441 : This is an error emanating from your
is not responding server indicating that the recipient’s server is not
responding. Your server will automatically try again a
(also called SMTP Error 4.4.1) number of times – how many depends on how your server
has been configured.

442 – The connection was SMTP Error 442 : Your server started delivering the
dropped during message but the connection was broken during
transmission. transmission. This may be an unusual transient error –
however, if it keeps happening you should investigate
possible problems with your server’s network card, your
Internet routers, processes hogging the resources of your
(also called SMTP Error 4.4.2)
server, and anything else which could result in a network
connection being broken.

446 – The maximum hop SMTP Error 446 : The maximum hop count was
count was exceeded exceeded for your message. The most likely cause of this
for the message error status code is that your message is looping internally
on your server, internally between two of your
(also called SMTP Error 4.4.6) organisation’s servers, or, sometimes, looping between
your server and the recipient’s server.

447 – Your outgoing SMTP Error 447 : Your outgoing message timed out
message timed out. because of problems with the receiving server who
objected to your message. Typically there is a problem
with the message header (such as too many recipients, in
most cases, or a protocol timeout between the two
(also called SMTP Error 4.4.7)
servers).

449 – Routing error SMTP Error 449 : This is a Microsoft Exchange Server
specific error code. As per Microsoft’s documentation this
error code is returned when either of the following
(also called SMTP Error 4.4.9) conditions occurs : an SMTP connector is configured to
use DNS without a smart host and also uses a non-SMTP
address space (e.g. X.400), or A message was sent to a
recipient who was identified as a member of a routing
group that was deleted.

Microsoft recommends using the WinRoute tool to

troubleshoot this error (Microsoft Knowledgebase article
281382)

Page 7 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

450 – Requested action not SMTP Error 450 : The server could not access the
taken – The mailbox mailbox to deliver the message. This could be caused by
was unavailable at the a process on the remote server tidying up the mailbox, or
remote end. A the remote mailbox could be corrupt, or the remote mailbox
secondary SMTP may be stored on another server which is currently offline,
error code may follow or the network connection went down while sending, or the
“450” to refine the remote mail server does not want to accept mail from your
reason for the failure server for some reason (IP address, blacklisting, etc..).
to transmit the
message, e.g. In general SMTP Error 450 is a transient error at the
“SMTP Error 450 remote end (the destination), or at one of the routers
or servers en route to the remote end, and should
induce your mail server to retry after it’s preset retry
interval. Example of an SMTP Error 450 reply message :
(also called SMTP Error 4.5.0)
“450 Please try again later”, or a classic Novell GroupWise
450 status message : “The message that you sent has
been delayed. The reason given for the delay: 450 Host
down (relay.clara.net)”.

SMTP Error 450 is often followed by a second SMTP error

code to refine the reason for the email not reaching its
destination. For example : “SMTP Error 450 5.2.3 Msg
Size greater than allowed by Remote Host”. When that is
the case and If the error message is not as clearly worded
as in this example, then simply search this document for
the secondary error code. In this case searching this
document for SMTP Error 523 or SMTP Error 5.2.3 would
yield an explanation identical to the wording above.

Page 8 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

451 – Requested action SMTP Error 451 : The action has been aborted by the
aborted – Local error ISP’s server. “Local” (Local Problem, Local Error) refers
in processing. to the next server that your message will go through after
leaving your server, typically your ISP’s server, or the
or SMTP relaying service you are using, or, if your mail server
is sending directly to the destinations, the destination mail
Requested action server. This error is usually due to overloading at your
delayed – Local ISP or your SMTP relaying service from [temporarily]
problem too many messages or some other similar transient
failure. Typically some [hopefully] temporary event
or prevents the successful sending of the message. The next
attempt to send by your server may prove successful.
<IP_Address> has
recently sent spam If this error keeps occurring to the point that it has
effectively lost its transient nature and has become
..... frequent (!!), then the problem is at your end and
(also called SMTP Error 4.5.1) you should check your own mail server (if you email out of
a corporate network), communications on your side (router,
server network card), or inform your ISP if your mail server
relays through your ISP or if you are a home user emailing
out through Outlook, Outlook Express, Windows Mail, or
similar email program.

Examples of typical SMTP Error 451 return messages :

“SMTP error 451 Unable to complete command, DNS not
available or timed out” or “451 Domain of sender
address does not resolve” or “451 Error getting LDAP
results in map”, or “451 4.7.1 Greylisting in action,
please come back in 00:02:00 [minutes]” or “The
message that you sent has been delayed. The reason
given for the delay : 451 Temporary local problem - please
try later.”.

------------------------------

With the original SMTP standards having been invented

before spam became the scourge of the Internet, there are
no SMTP error codes dedicated to anti-spam errors. As a
result, SMTP Error 451 is now increasingly also used
to indicate that a message has been rejected by the
remote server because of anti-spam measures. A
typical error might be, for example : “SMTP error from
remote mail server after end of data, host
<host_address>: 451 <ip_address> has recently sent
spam. If you are not a spammer, please try later.”.

If all anti-spam related SMTP 451 errors are as descriptive

as the one above, then the error itself will tell you what you
need to do. As a general rule, however, you will most
times need to take some measures to have either your
server, or your ISP’s server, taken off some Internet
blacklist used by the recipient.

Page 9 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

452 – Requested action not SMTP Error 452 : The ISP server’s disk system has run
taken – Insufficient out of storage space, so the action had to be cancelled.
storage. Unless you are with an ISP which is so slack that they
have not implemented Disk Full Alerts, this error usually
indicates that your ISP’s mail server is overloaded from too
(also called SMTP Error 4.5.2) many messages. This can happen even to the best ISPs
when, for example, there have been problems and none of
the ISP’s customers could send mail; as soon as the
problems are fixed there is almost always a situation where
thousands of users and organizations are trying to send
mail all at the same time, and those numbers can
occasionally result in the ISP’s mail servers’ hard disks
temporarily filling up, with SMTP Error 452 being the result.
The next attempt to send by your server may prove
successful.

SMTP Error 452 : Most ISPs mail servers impose a

maximum number of concurrent connections that client’s
mail servers can attempt to make, and they usually also
have a limit on the number of messages that are sent per
connection. With business customers these maximums
are rarely reached, if ever. Nevertheless, If you have a lot
of messages queued up, for example as a result of the
connection to your ISP going down for a significant amount
of time (and you have hundreds of users in your
organization, or it happened just as you were about to
send that large mailshot!), there could be a situation where
the output of messages from your server goes over the
maximum number of messages per connection allowed by
your ISP. This is another case where the ISP’s server may
issue a 452 SMTP error. As above, the next attempt to
send by your server may prove successful.

SMTP Error 452 : This error can also be indicative of a

problem on your own mail server. Here is an example of
an SMTP 452 error : “”452 Out of memory”

465 – Code Page SMTP Error 465 : This is an Exchange Server-specific

unavailable on the error code. This error is returned by the recipient’s server
recipient server if the incoming email specifies a Code Page that is not
installed on the recipient’s server, normally because not all
language files were installed on the server during either the
installation of Windows or of Exchange Server.
(also called SMTP Error 4.6.5)

Update : in 2010 we are seeing other mail server

programs and web applications now using SMTP Error
465. For example the osTicket product will return
“465 SMTP: Invalid response code received from server” if
the SMTP server you are using in your configuration of
osTicket, requires authentication and you have set up the
authentication incorrectly.

Page 10 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

471 – This is a local error SMTP Error 471 : This is always a local error with your
with the sending own mail server. SMTP Error 471 (or 4.7.1) is usually
server and is often tagged onto a primary SMTP error code, for example
followed with “Please “SMTP Error 450 4.7.1”, or “SMTP Error 451 4.7.1”, or
try again later” “SMTP Error 550 4.7.1”; example : “451 4.7.1 Greylisting
in action, please come back in 00:02:00 [minutes]”. In all
the cases that we have seen SMTP Error 471 is usually
(also called SMTP Error 4.7.1) caused by anti-spam or virus scanning software on your
server (the sending server) getting into problems through a
bug in the software, or because of a bad automatic update
from the antivirus/anti-spam manufacturer, because of lack
of memory on your server, or because of hard disk
problems.

500 – Syntax error SMTP Error 500 : The last command sent by your server
command not was not recognized as a valid SMTP or ESMTP command,
recognized. or is not formatted in the way the server expected. This
includes situations where the command is too long.

Note that commands that are recognized, but not

(also called SMTP Error 5.0.0)
implemented, are handled by different status messages
(see 502 and 504).

Note : A “500 unrecognized command” server response

is often a case of antivirus software and/or firewall
interfering with incoming and/or outgoing SMTP
communications. Read your antivirus / firewall software
documentation thoroughly to solve the problem.

Examples of SMTP Error 500 error messages : “SMTP

Permanent Error: 500 Access Denied By Port Access” or
“SMTP Error 500 Line too long”.

Page 11 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

501 – Syntax error in SMTP Error 501 : The command was correct and
parameters or recognised, but the parameters (the arguments, e.g. email
arguments (e.g. address) were not valid.
invalid email address)
For example, the following email address will definitely give
Can sometimes also an SMTP Error 501 with most mail servers,
be indicative of happy\_larry@hotmail.com, as “\” is not allowed in email
communication addresses, which makes this email address invalid.
problems
In the vast majority of cases SMTP Error 501 is caused
by invalid email addresses, an invalid domain name
recipient, or a Unix / Linux SEND MAIL command
(also called SMTP Error 5.0.1)
which does not follow the established standards. For
example, a typical return error message might be :
“<remote-server-ip-address> does not like recipient.
Remote host said: 501 Invalid Address”.

In cases where the error is not caused by an invalid email

address, or by the failure to assign a valid email address to
the mandatory “From” property, an SMTP Error 501,
particularly if repeated, can be indicative of
communications problems, such as a noisy line,
intermittent drops in network connections, etc...

------------------------------

If you write your own SMTP program, rather than use

established SMTP software, you may get a 501 error if you
send to recipients hosted on a Microsoft Exchange server
and you add a trailing space or dot to the domain name in
your programming code. In such case you will typically get
a “501 5.5.4 Invalid Address” error. See this Microsoft
Knowledgebase article for more details :
http://support.microsoft.com/kb/291828.

------------------------------

Lastly, if you virus scan incoming emails on an Exchange

server, with the antivirus scanning software integrated into
Exchange, then the problem may be a bug in your antivirus
software – try turning it off to see if the problem
disappears.

502 – Command not SMTP Error 502 : The command or function issued by
implemented. your mail server is valid but has not been activated
(typically, it is not supported on this particular server).
(also called SMTP Error 5.0.2)

Page 12 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

503 – Bad sequence of SMTP Error 503 : In the original standards SMTP Status
commands. 503 indicates that the commands have been sent in the
wrong order, for example your mail server has sent the
or “Hello” command before sending the “Mail” command.
This can often be caused by a drop in network connection
This mail server just as your server was sending a command, resulting in
requires the ISP’s server not receiving it and consequently not
authentication understanding the command that followed it.

Note : this error, particularly if repeated, can be indicative

(also called SMTP Error 5.0.3) of communications problems, such as a noisy line,
intermittent drops in network connections, intermittently
faulty router, etc... The typical pattern will be that you get
the error, then messages transmit without problems, then
you get error 503 again, etc…

------------------------------

SMTP Reply Code 503 is nowadays more often an

indicator that the SMTP server you are trying to use
requires authentication and you tried to send a message
without authentication (username + password). This
SMTP Error 503 is permanent in that the SMTP server will
not log any errors in its log and it will not retry – you will
have to resend the email using authentication. Example of
such an error : “SMTP Error (state 13): 503 This mail
server requires authentication when attempting to send to
a non-local e-mail address. Please check your mail client
settings or contact your administrator to verify that the
domain or address is defined for this server.”.

504 – Command parameter SMTP Error 504 : The command and parameter are both
not implemented. valid, but the parameter is not implemented on the ISP
server, or an additional parameter or action is missing.

(also called SMTP Error 5.0.4) For example, an often encountered SMTP Error 504 is :
“504 Need to authenticate first”.

If you are receiving this error in a Microsoft

Exchange Server environment where the error shows up
in the Application Log as Event ID 7004 or 7010, then
read this Microsoft Knowledgebase article
http://support.microsoft.com/kb/843106.

510 – Bad Email Address SMTP Error 510 : Bad email address. This status code
is generated by the sender’s local mail server.

(also called SMTP Error 5.1.0) If the email was addressed internally, then it means that
the addressee, as written in the email’s TO, CC, or BCC
fields, does not exist in your organization’s email system.

If the email was addressed externally, then the recipient’s

email address was misspelt.

Page 13 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

511 – Bad Email Address SMTP Error 511 : Bad email address. This error is
similar to error 510 and as with error 510, this status code
is generated by the sender’s local mail server.
(also called SMTP Error 5.1.1)
If the email was addressed internally, then it means that
the addressee, as written in the email’s TO, CC, or BCC
fields, does not exist in your organization’s email system.

If the email was addressed externally, then the recipient’s

email address was misspelt.

Here is an example of a 511 error : “511 sorry, recipient

address has invalid format”.

512 – The host server for SMTP Error 512 : This SMTP reply code is received
the recipient’s when one of the servers on the way to the destination is
domain name cannot unable to resolve the domain name of a recipient email
be found (DNS error) address. Said differently : one of the servers on the way
to the destination, including your server or your ISP, has a
DNS problem or, possibly correctly, does not like one of
the email addresses in the message’s TO, CC, and BCC
(also called SMTP Error 5.1.2)
fields.

The first check you should perform to resolve a 5.1.2 reply

code is to check all the recipient email addresses for
incorrect domain names (misspelt domain names, or,
maybe, totally non-existent domain names) – remember,
error code 512 is very specifically an error with the
domain name of one of the recipient email addresses.
You can call the recipient(s) or use the WHOIS tool of The
Ultimate Troubleshooter. If all the recipient email
addresses check out as regards the domain part of the
email addresses, then one of the servers on the way to the
recipient(s) has DNS problems – usually this will be one of
the first 2 servers in the chain, your own mail server (or
your network) or your ISP’s mail server.

Examples of typical SMTP error 512 messages : “5.1.2 -

Bad destination host 'DNS Hard Error looking up domain”,
or “SMTP Error 550 5.1.2 Host unknown – host cannot be
found”, or how about this fantastically informative error
message “5.1.2 The message could not be delivered
because the recipient's destination email system is
unknown or invalid. Please check the address and try
again, or contact your system administrator to verify
connectivity to the email system of the recipient.”.

--------------

In summary : most SMTP error 512 conditions are

caused by misspellings of the domain name part of a
recipient email address. However, with the proliferation
of spam, error 512 is also often encountered by automatic
“out-of-office” replies to junk mail because the domain
names used by junk mail are often bogus domain names.

Page 14 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

513 – Address type is SMTP Error 513 : This status code (from the sender’s
incorrect (most mail mail server) is usually symptomatic, in an Exchange +
servers) Outlook environment, of the user’s Outlook Contacts
having been imported from another system or PST and
or where some of the addresses are not defined correctly.
Or, in any environment it is simply that the end-user simply
Relaying denied or did enter the email address completely wrongly, such as
Authentication copying it from a website and not replacing “at” with “@”,
required (a small e.g. : John.DoeatUCLA.edu (which should have been
percentage of mail John.Doe@UCLA.edu), or John.Doe@UCLA.edu” (“,
servers) quotes, is not allowed in email addresses and is often
included in error as a result of copying and pasting an
email from somewhere).
(also called SMTP Error 5.1.3)
The user should check all the recipient addresses in the
email, including those that were inserted from Contacts.

Note : the SMTP reply code 5.1.3 is often a secondary

reply code. Some mail servers, for example, might reply
“SMTP error 501 5.1.3 Invalid address”, or “SMTP error
553 5.1.3 User address required !”, or “SMTP error 501
5.1.3 Bad recipient address syntax”, or “SMTP error 513
Relaying Denied - Can not send e-mails to some
addresses”, or this excellently informational Exchange
Server 2007 error (the whole error message is in green
below) :

”SMTP error 550 5.1.3 STOREDRV.Submit; invalid

recipient address.

Delivery has failed to these recipients or distribution lists:

The format of the recipient's e-mail address isn't valid. A

valid address looks like this: username@microsoft.com.
Microsoft Exchange will not try to redeliver this message
for you. Please check the e-mail address and try sending
the message again, or provide the following diagnostic text
to your system administrator.

5.1.3: The format of the recipient e-mail address is not

valid. Valid SMTP e-mail addresses can contain only
letters, numbers, hyphens, periods, and only one @
symbol. Troubleshooting: Verify that the SMTP address of
the recipient is formatted correctly and resend the
message.”

--------------

SMTP Error 513 is also used by a small percentage of

mail servers to indicate a completely different error, namely
that you need to authenticate to the mail server before
being able to send your message (SMTP authentication).
A typical error message might be : “SMTP error 553
Authentication is required to send mail as
username@ispdomainname.com”.

In such cases you simply need to configure your mail

server, or your email program to send emails with SMTP
authentication. Page 15 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

523 – The Recipient’s SMTP Status 523 : This error will be received when the
mailbox cannot total size of the message you have sent (ie: message + all
receive messages of its attachments) exceeds the size limits on the
this big Recipient’s server. Many companies implement the good
practice of configuring their servers with limits on the size
of emails they can receive to prevent their systems running
out of space as a result of a spam attack where the spam
(also called SMTP Error 5.2.3)
emails contain large attachments, or as a result of valid but
not very technically savvy senders sending enormous
scans (through not knowing that scanning at 1200dpi
rather than the usually perfectly usable and acceptable
300dpi, will create humongous attachments).

Check the size of the email you sent, and, specifically, the
size of the attachments you included, and consider splitting
your email into smaller emails. If that does not work, check
with the Recipient the maximum size of email they can
receive, and if that is still prohibitive then consider FTP
arrangements between you and the recipient.

SMTP Error 523 is often a secondary SMTP error code

rather than a primary error code, as in the following
examples : “SMTP Error 450 5.2.3 Message Size greater
than allowed by Remote Host” or “SMTP Error 552 5.2.3
Data size exceeds maximum permitted” or “SMTP Error
552 5.2.3 Message exceeds maximum fixed size”, and so
on ....

530 – Authentication is SMTP Error 530 : Originally this error has always
required pointed to a problem with the SMTP server you are
using requiring authentication (a username +
or password every time you send an email), as per the
examples below. However read this entry fully ....
Your server has been
blacklisted by the One example would be because that SMTP server,
recipient’s server typically your ISP’s SMTP server, requires all email sent
through it to be done with authentication (and your email
or program or server is not configured to do so).

The recipient’s The other classic example of this error is when you are
mailbox does not trying to send emails through a particular ISP’s SMTP
exist server but you are not doing so through that ISP’s
broadband connection. For example : at home you use
Verizon and you have configured Windows Mail (Outlook /
(also called SMTP Error 5.3.0) Outlook Express) on your laptop to send emails through
the Verizon SMTP server available free of charge to you as
a Verizon customer. All works well without authentication.
You then take a vacation to visit friends in Canada and at
their house their wireless Internet is through Telus. The
first time you try to send emails you get a
“530 Authentication is required” error. This is because the
Verizon SMTP server realises that you are trying to access
it through a DSL service not provided by Verizon (your
friends’ DSL service is provided by Telus) and it will only
allow you to access it if you can provide your Verizon
username + password (authentication) thus confirming that

Page 16 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

as a paid Verizon customer you are allowed to use their
SMTP server even though you are connecting to it through
a Telus DSL service. If at that point you then configure
Windows Mail / Outlook / Outlook Express to use
authentication, the problem will disappear.

In another example GMAIL (Googlemail) introduces a

secondary SMTP error 570 with its 530 replies. Here is a
typical GMAIL response telling that you need to use
authentication : “530, response: 5.7.0 Must issue a
STARTTLS command first”.

--------------

In a departure from the original intended use for error 530,

one of the most irritating misuse of SMTP response 530 is
its use to either indicate that your server has been
blocked by the recipient’s server or that the recipient’s
mailbox does not exist. And to make matters worse, the
explanation text attached to the error is totally misleading.
Judge for yourself – how would you ever suspect that
“SMTP error 530 : The message cannot be delivered
due to a configuration error on the server. Please
contact your Administrator.” either means that the
recipient’s server has actually blacklisted your server
or that the recipient’s mailbox does not exist ? Mad !!!

This misuse of error 530 is a fault of the outgoing

mailserver, almost always your own ISP’s server which
should return a 554 or similar error (for example : “554 this
user doesn't have a Yahoo.com account”), but which
instead returns a 530 error.

550 – Requested actions SMTP Error 550 : This response can be caused by quite
not taken as the a few situations.
mailbox is
unavailable. 550 is always a problem external to your own mail
server. Usually it is at the recipient’s end, but it could
550 is always a also originate from inside your own “walls” through being
problem external to caused, for example, by a firewall appliance which scans
your own mail server. your outgoing emails once they’ve left your server.
Usually it is at the
recipient’s end, but it --------------
could also originate
from inside your own SMTP Error 550 will be returned by many servers If the
“walls” through being recipient email address simply does not exist on the
caused, for example, remote side (you will often get “550 Invalid recipient” or
by an appliance “550 User account is unavailable” or “<ip-address-of-
which scans your remote-server> does not like recipient - 550 Address
outgoing emails once rejected” or “550 No such user here” or “550 Not our
they’ve left your Customer” or “550 Account not available” or “Remote
server. host said : 550 – Barack.Obama@ThisCompany.com, this
THISCOMPANY.COM Mailbox Does Not Exist – Giving
up”). In this case the sender of the email needs to contact
(also called SMTP Error 5.5.0) the recipient verbally to get the correct email address.

--------------

Page 17 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

SMTP Error 550 will sometimes also be returned by the

recipient’s anti-spam firewall if, for example, the
anti-spam firewall does not like the sender (typically
because the sender needs to be whitelisted). A typical
example of an SMTP Error 550 return message by an
anti-spam firewall might be :

240.240.240.240 does not like recipient.

Remote host said: 550-Verification failed for
John.Doe@YourDomain.com
550-Previous (cached) callout verification failure
550 Sender verify failed
Giving up on 240.240.240.240.

--------------

SMTP Error 550 can also be returned by your own mail

and web filtering appliance where the message leaves
your mail server and is intercepted by your web and mail
filtering appliance, before it leaves your premises, and for
whatever configuration reasons it thinks your email is spam
or dangerous for the recipient (in other words it tries to
protect your company from accidentally sending viruses
and accidental spam emails – through a PC being infected
with a bot – to your customers). Here is a typical example
of such a response :

The attached file had the following undeliverable

recipient(s):
John.Doe@comcast.net

Transcript of session follows:

Command: Data...
Response: 550 Cyberoam Anti Spam Engine has identified
this email as a spam. Ref-
id:str=0001.0A0B0206.4BA7422C.01F5,ss=1,vtr=str,vl=0,p
t=
--------------

SMTP Error 550 will also be returned if the user’s

mailbox is not local and Mail Relay is not enabled, or
the sending address is invalid (the latter is a way, by the
remote server, to control spam).

--------------

Other situations of SMTP Error 550 include sending mail

to recipients outside of your domain where this is not
allowed.

--------------

SMTP Error 550 is also returned when you are attempting

to send through a server which requires SMTP
authentication and you have not supplied credentials (ie.
your mail server, or email program, is attempting to send

Page 18 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

without SMTP authentication)

--------------

Yet another set of circumstances where an SMTP error

550 might be issued include an incorrect From address
when used with an ISP where you can send mail only if
the From address is from a domain that they host for
you (at the time of writing, September 2008, and still at
time of this update, March 2010, British Telecom in the UK
is such an ISP – you have to notify them through a lengthy,
ridiculous, and almost soul destroying procedure, involving
proving that you own the domain, for them to allow you to
send emails from a domain name that they do not host for
you).

--------------

Another case of SMTP Error 550 is when the recipient’s

server is down (or cannot receive mail at this time) and
the ISP’s servers will retry periodically for a limited amount
of time (this is often accompanied by a return mail from
your ISP informing the sender of the email of just that
situation).

--------------

Another case of SMTP Error 550 is when the recipient’s

server requires you to make a change to the To part of
your email to achieve successful delivery of the email
(some organizations configure their receiving mail servers
in this way when they have changed their domain name
and want to force the senders to update his address books
– for example, My-Great-Company.com has changed its
domain to MyGreatCompany.com and you are still using
the old domain name).

--------------

Yet another set of circumstances when the SMTP Error

550 is received is when the recipient’s mailbox has
been suspended. For instance, the QMAIL SMTP mail
program has an endearing way of telling you about a
mailbox that has been suspended : “I'm afraid I wasn't
able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work
out. <email-address@email-domain>: <ip-address-of-
remote-server> does not like recipient. Remote host said:
550 [SUSPEND] Mailbox currently suspended - Please
contact correspondent directly.”.

--------------

Another circumstance of an SMTP Error 550 is when the

recipient’s mailbox has been disabled. The typical
reasons for this are the mailbox being full (the user needs
to delete messages before new ones will be accepted) or

Page 19 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

the user not having paid a bill. An example of the reply
you will receive is : “550 mailbox temporarily disabled”

--------------

SMTP Error 550 can also occur when either your DNS or
your ISP’s DNS is not configured correctly for the
recipient’s mailserver details, or the recipient’s MX record
is configured incorrectly. A typical error message for this
type of error might be : “550-Verification failed for
my@exchangeserver.com - 550-Unrouteable address
- 550 Sender verify failed (in reply to RCPT TO
command) ".

--------------

”Mailbox is inactive”. Another instance of error 550 is

when there is a temporary system-wide problem at the
ISP. The error takes two forms, the one just quoted, or :
“5.1.0 - Unknown address error 550-'Mailbox is
inactive'”.

This error is almost always a problem at the hosting

ISP which hosts the POP box(es) of the recipient’s
email address or domain. You need to inform the
recipient that there is a problem with their hosting
company. So, for example, if you are sending an email to
John.Doe@clara.net and you get the “Mailbox is inactive”
error, then you need to tell John Doe that his hosting ISP,
ClaraNET, are having problems with incoming emails and
that he should talk to them.

551 – User not local or SMTP Error 551 : If neither the sending mail address nor
invalid address – the recipient’s address are locally hosted by the server,
Relay denied. then the ISP’s servers may refuse to relay the message
on.

Some ISPs implement this restriction to thwart spammers.

(also called SMTP Error 5.5.1)
In our view, here at AnswersThatWork, this is a lazy and
incompetent method of fighting spam as most of the time it
does nothing but inconvenience no-one other than the
ISP’s vast majority of considerate and law abiding users.
In our experience this usually goes hand in hand with
barely competent technical support. At the time of writing,
14-Sep-2008, a typical culprit for this is BT, British
Telecom, in the UK. The way in which it manifests itself is
as follows : you have a domain that is hosted by
CrystalTech.com but your ISP is DodgyISP.com and
you try to send emails from your domain to
WhatANiceBunchOfPeopleYouAre@yahoo.usa.
Neither your domain nor Yahoo.usa are hosted by
DodgyISP.com, as a result your email is not accepted by
DodgyISP’s mail servers and your mail server is returned
an SMTP Error 551. To correct the problem you have to
call DodgyISP.com and ask them to enter your domain
name as an allowed sender.

Page 20 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

552 – Requested mail SMTP Error 552 : The recipient’s mailbox has reached
actions aborted – its maximum allowed size (this is often accompanied by
Exceeded storage a return mail from your ISP or mail server informing the
allocation. sender of the email of just that situation).

or Example : “552 sorry, mailbox Alan@ThisCompany.com

is over quota temporarily (#5.1.1)”.
Size of the incoming
message exceeds the --------------
incoming size limit
Some mail servers have extended the scope of SMTP
Reply Code 552 by also including errors where the size of
(also called SMTP Error 5.5.2) the incoming message exceeds the size limit specified
by the Network Administrator, as in, for example,
“SMTP Error 552 5.2.3 Message size exceeds fixed
maximum message size (7000000)”, which effectively
says that the incoming message was larger than the 7MB
limit (7,000,000 bytes) set by the Network Administrator of
the recipient’s mail server.

Page 21 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

553 – Requested action not SMTP Error 553 : There is an invalid email address in
taken – Mailbox name the “To“, “CC”, or “BCC” field of the email message.
invalid.
Here is a typical SMTP Error 553 response :
or
”Hi. This is the QMAIL-send program at <ip-address>. I'm
You are attempting to afraid I wasn't able to deliver your message to the following
send emails through addresses. This is a permanent error; I've given up. Sorry
a specific ISP’s SMTP it didn't work out. <Email-address-you’re-sending-to> :
server without <remote-mail-server-ip> does not like recipient. Remote
authentication and host said: 553 5.3.0 <Email-address-you’re-sending-to>.
without being Addressee unknown. Giving up.”.
connected to the
Internet through that --------------
ISP’s service
SMTP Status 553 is also sometimes returned by an ISP
or mail server. When this happens this is almost always
because you are trying to send through a specific
You are sending from ISP’s SMTP server and yet you are not connected to
an Exchange server the Internet through that ISP; for example : you have
configured to send connected to the Internet through a Comcast broadband
via DNS and you do connection but your email program (Outlook Express,
not have a public Windows Mail, ...) is configured to send emails through the
reverse DNS record SMTP server of Tiscali. A typical such error message
pointing back to your might be : “553 sorry, relaying denied from your location”.
Exchange server
--------------

(also called SMTP Error 5.5.3) SMTP Error 553 can also be received if you are sending
from a Microsoft Exchange server configured to send
directly via DNS (rather than by relaying to an ISP’s
SMTP server) and there is no public reverse DNS
record pointing back to the public IP of your Exchange
Server, in which case some receiving mail servers return
a 553 error because they weren’t able to verify that your
server’s HELO name matched its public outgoing IP
address. A typical error message for this 553 response
might be : "5.5.0 smtp;553 sorry, that domain isn't allowed
to be relayed thru this MTA (#5.7.1)” or “5.5.0 smtp;553
sorry, that domain isn't in my list of allowed rcpthosts
(#5.7.1)”.

554 – Transaction failed. SMTP Error 554 : There was a permanent error trying to
complete the mail transaction which will not be resolved by
Nowadays SMTP resending the message in its current form. Some change
status 554 is in most to the message and/or destination must be made for
cases returned when successful delivery.
the recipient server
believes your email is For instance, Yahoo often returns the following if the
spam or your IP recipient email address does not exist on the Yahoo
address or ISP server systems : “554 delivery error: This user doesn't have a
has been blacklisted Yahoo.com account”. Another typical Yahoo SMTP Error
on one or more 554 reply is : “554 delivery error: Sorry your message to
Internet blacklists. <Email-Address> cannot be delivered. This account has
been disabled or discontinued”.
or
In the case of an IBM Lotus Domino server on the other

Page 22 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

With Yahoo, on the hand, this is either a disk full error (the first thing to
other hand, this check), or a Lotus Domino bug which has appeared in
usually means the various guises in many versions of Lotus Domino as far
email address does back as 2002. Eight years, Eight years and counting and
not exist or has been IBM still suffer from this bug – the mind boggles ! Click
disabled. on this link to read the latest IBM Knowledgebase article
on this error at the time of writing :
or http://tinyurl.com/ygfqoov.

With IBM’s Lotus --------------

Domino this is either
a Domino bug or a In most other cases, however, a recipient mail server will
Disk Full error return an SMTP REPLY 554 when its anti-spam firewall
does not like the sender’s email address, or the
sender’s IP address, or the sender’s ISP server
(because, for example, they are listed in an RBL) and
(also called SMTP Error 5.5.4)
where you will therefore either need to have the sender
whitelist you in their anti-spam program/appliance, or,
worse, you will need to take steps to have either your IP
address or your ISP’s servers (if you send mail through
your ISP) de-listed from one or more RBLs (RBL =
Realtime Blackhole List – also called Realtime Blacklist
nowadays).

For example, a 554 error returned by a Comcast server

might look like this : “Username@comcast.net SMTP error
from remote mail server after initial connection : host
mx2.comcast.net :
554 IMTA11.emeryville.ca.mail.comcast.net <Your-server-
IP-address> was found on one or more DNSBLs, see
http://help.comcast.net/content/faq/BL000010”, where
DNSBLs = DNS Blacklists. In this case, therefore, if you
get such a message back it is telling you your IP address,
or your ISP’s mail server is listed on one of the anti-spam
blacklist databases that Comcast uses to filter out spam on
incoming emails to Comcast mailboxes – click the link
provided in the error message to see how you may be able
to un-blacklist yourself as far as Comcast is concerned.

Here is another example from the OZEMAIL ISP in

Australia, “SMTP error from remote mail server after initial
connection to host mx1.ozemail.com.au :
554 filter.ozemail.com.au” – not very informative, as you
can see, but the name of the server returning the SMTP
reply 554 is what gives this away as OZEMAIL’s anti-spam
not liking you : filter.ozemail.com.au. “Filter” in the
name of a recipient server is almost always an indication
that that server is an anti-spam and antivirus server.

And here is a Twitter example : “SMTP error: Email

Error: RCPT TO invalid mail server response:
554 5.7.1 : Recipient address rejected”.

Note that SMTP Error 554 can also often be buried in the
middle of SMTP Error 550 errors. Here is an example of a
recipient mail server returning an SMTP Error 554 because
its Barracuda anti-spam firewall appliance rejected the

Page 23 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

email (the cause, as shown below, is Barracuda
Reputation which means your IP address or your ISP’s
server is blacklisted on Barracuda’s RBL) :

240.240.240.240 does not like recipient.

Remote host said: 550-Verification failed for
John.Doe@YourDomain.com
550-Called: 250.250.250.250
550-Sent: RCPT TO:John.Doe@YourDomain.com
550-Response:
554 : Service unavailable; Client host
[server11.virgohosting.net] blocked using Barracuda
Reputation;
http://recipientdomain.barracudacentral.com/q.cgi?ip=230.
230.230.230
550 Sender verify failed
Giving up on 240.240.240.240

Here is a Yahoo example : “UP Email not accepted for

policy reasons. Please visit
http://help.yahoo.com/help/us/mail/defer/defer-
04.html”.

Whenever you see the word “Reputation” in a return

error you need to think “Outgoing IP address + Spam
going from that address”. The outgoing IP address is
often not yours, unless you know you’re a spammer (!!),
but that of your ISP where one of its servers has been
used by spammers and as a result has been blacklisted on
the Internet and unfortunately your emails are going
through that server. Here is a classic example of this type
of return SMTP error : “554 Your access to this mail
system has been rejected due to the sending MTA's poor
reputation. If you believe that this failure is in error, please
contact the intended recipient via alternate means.”.

571 – I have been told not SMTP Error 571 is usually a subset of SMTP Error 550.
to work with you !!! So typically you will get an “SMTP Error 550 571” or an
“SMTP Error 550 5.7.1”. SMTP Error 571 is almost
always the recipient’s server telling your sending
(Also called SMTP Error 5.7.1) server that “it has been told not to work with you !”.
The explanation text which follows the error response
usually does a good job of telling you why the remote
server does not want to work with your server (typically it
will be because your server/email-address is not
whitelisted, or you are not allowed to send messages
through this ISP’s SMTP server without providing
authentication, relaying not permitted, or your server is on
an RBL blacklist).

Typical SMTP 571 responses are : “5.5.0 SMTP; 571

Delivery not authorized, message refused” or “550 5.7.1
Mail from Ip_Address refused by blackhole site
dialups.mail-abuse.org” or “571 email address we do
not relay” or “550 5.7.1 Relaying prohibited”.

Page 24 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.

AnswersThatWorkTM SMTP Status codes – SMTP Error Codes – SMTP Reply Codes – 2010

SMTP Status Codes What the message may mean

The following addresses had “The following addresses had permanent delivery
permanent delivery errors errors” / “The following address had permanent
delivery errors” : Either of these sentences are usually
followed by one or more email address(es).

The error message is effectively saying that the email

addresses listed do not exist, or no longer exist (if you
used to be able to email to them successfully). You need
to get the sender to verbally verify with the recipient what
his/her new email address is.

Mailbox is inactive A typical error message might go like this : “A message

that you sent could not be delivered to one or more of its
(The hosting ISP is having problems)
recipients. This is a permanent error. The following
address(es) failed : XXXXXX Mailbox is inactive”.

This error is almost always a problem at the hosting

ISP which hosts the POP box(es) of the recipient’s
email address or domain. You need to inform the
recipient that there is a problem with their hosting
company. So, for example, if you are sending an email to
John.Doe@clara.net and you get the “Mailbox is inactive”
error, then you need to tell John Doe that his hosting ISP,
ClaraNET, are having problems with incoming emails and
that he should talk to them.

oooooooOOOOOOOooooooo

Page 25 of 25

© Copyright AnswersThatW ork.com, 15-May-2010.