Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
232 views

Configuring Microsoft SQL Server 2008 Express Server Authentication For Use With InTouch Alarm DB Logger-TN497

Configuring Microsoft SQL Server 2008 Express Server Authentication for Use with Wonderware InTouch Alarm DB Logger-TN497

Uploaded by

Mauricio Palacios
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
232 views

Configuring Microsoft SQL Server 2008 Express Server Authentication For Use With InTouch Alarm DB Logger-TN497

Configuring Microsoft SQL Server 2008 Express Server Authentication for Use with Wonderware InTouch Alarm DB Logger-TN497

Uploaded by

Mauricio Palacios
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Schneider Electric Software

Knowledge & Support Center

Doc Type Tech Notes

Doc Id TN497

Last Modified Date 02/20/2015

Configuring Microsoft SQL Server 2008 Express Server Authentication for Use with
InTouch Alarm DB Logger
LEGACY TECH NOTE #

892

SUMMARY

In some cases, InTouch is installed on a machine without Microsoft SQL Server. When SQL Server is not installed in the machine where you are
installing InTouch, InTouch installs SQL Server Express. You can also install SQL Server Express manually.

The InTouch Alarm DB Logger requires a SQL-Authenticated connection. However, by default, SQL Server Express does not enable the SQL
Server and Windows Authentication mode. This option must be configured manually after the installation.

Note: If SQL Server is already installed, InTouch's Alarm DB Logger will make use of it.

When InTouch installs SQL Server Express, complete the following steps to turn on SQL Server and Windows Authentication mode and enable
the sa account.

See Tech Note 892G ndern der Microsoft SQL Server 2008 Express Serverauthentifizierung nach InTouch 2012 Installation for the German
version.

SITUATION

Application Versions

Microsoft SQL Server Express 2008


Wonderware InTouch 2012

Procedure
1. Download and install the x86 version of SQL Server 2008 Management Studio Express from
http://www.microsoft.com/download/en/details.aspx?id=7593.
2. Start after successful installation the SQL Server Management Studio.

Figure 1: Start SQL Server Management Studio


3. Login to SQL Server.

Copyright 2016. Schneider Electric Pvt Ltd


Figure 2: Login Window
4. Open the Server Properties by right-clicking it and clicking Properties.

Figure 3: SQL Server Properties


5. Change the Server authentication setting on the Security Page to SQL Server and Windows Authentication mode and click OK.

Copyright 2016. Schneider Electric Pvt Ltd


Figure 4: Change to SQL Server and Windows Authentication mode

At the Server root, Security/Logins/sa is disabled (red arrow).

Figure 5: sa Login is Disabled


6. Right-click sa and click Properties.

Copyright 2016. Schneider Electric Pvt Ltd


Figure 6: sa Properties
7. Set a new Password for the sa User in the General page (Figure 7 below).

Figure 7: Set Up a Password for sa


8. Click Status and Enable the Login (Figure 8 below).

Copyright 2016. Schneider Electric Pvt Ltd


Figure 8: Enable Login
9. Right-click sa and click Refresh.
10. Restart the SQL Server by right-clicking it, then clicking Restart.
11. Start Alarm DB Logger Manager and configure it (Figure 9 below). In User Info enter the username sa and the previously defined password.
Click Test Connection to validate the configuration.

Copyright 2016. Schneider Electric Pvt Ltd


Figure 9: Configure Alarm DB Using Alarm DB Manager

Copyright 2016. Schneider Electric Pvt Ltd

You might also like