S115V Specifications
S115V Specifications
S115V Specifications
SPEAKER SYSTEM
DEUTSCH
S112V/S115V/S215V
SM10V/SM12V/SM15V
FRANAIS
SUBWOOFER
SW115V/SW118V/SW218V
ESPAOL
Owners Manual
Bedienungsanleitung
Mode demploi
Manual de instruccines
Thank you for choosing the YAMAHA speaker system. In
order to take maximum advantage of the speakers features
and ensure maximum performance and longevity, please
read this manual carefully before using the speaker system.
Keep the manual in a safe place for future reference.
Contents
PRECAUTIONS .................................................................. 2
Connecting the Speakers ..................................................... 4
Specifications ...................................................................... 6
Technical Data/Kennlinien/Donnes techniques/Datos tc-
nicos .................................................................................. 32
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the device or other property. These precautions include, but are not limited to, the following:
Location Connections
If you use a stand, check the stands specifications and Before connecting the device to other devices, turn off the
make sure that it is sturdy enough to support the weight of power for all devices. Before turning the power on or off for
the speaker. You may need to limit the number of people all devices, set all volume levels to minimum.
around the placed stand, in order to avoid toppling the Use only speaker cables for connecting speakers to the
device or causing damage to the internal components. speaker jacks. Use of other types of cables may result in
If you use speaker stands, be sure to keep the following fire.
cautions. Be sure to observe the amplifiers rated load impedance
Use the speaker stands with their legs fully opened. (see page 4), particularly when connecting speakers in
Place only one speaker on each speaker stand. parallel. Connecting an impedance load outside the ampli-
Tighten fastening screws securely. fiers rated range can damage the amplifier.
Remove the speakers from the stands before moving
the stands or adjusting their height.
Add weight such as sand bags around the stand legs to Handling caution
prevent them from falling over. Do not use the device for a long period of time at a high or
Use the stand at a maximum height of 140 cm. uncomfortable volume level, since this can cause perma-
If you use a metal socket of the SW115V/SW118V sub- nent hearing loss. If you experience any hearing loss or
woofer to allow mounting of a satellite speaker, use a pole ringing in the ears, consult a physician.
shorter than 90cm with an outer diameter of 35mm. Do not operate the device if the sound is distorting. Pro-
When transporting or moving the device, always use two or longed use in this condition could cause overheating and
more people. result in fire.
Before moving the device, remove all connected cables. Always turn AC power to the power amplifier on last in any
Do not expose the device to excessive dust or vibrations, audio system to avoid speaker damage. When turning
or extreme cold or heat (such as in direct sunlight, near a power off, the power amplifier should be turned off first for
heater) to prevent the possibility of panel disfiguration or the same reason.
damage to the internal components.
Do not place the device in an unstable position where it
might accidentally fall over.
2
This product, when used in combination Poly Switch
ENGLISH
with amplification and/or additional loud-
All full-range loudspeakers are fitted with a self-resetting
speakers, may be capable of producing
poly switch that protects the high-frequency driver from
sound levels that could cause permanent
damage caused by excessive power.
hearing loss.
DO NOT operate at high volume levels or at If a loudspeaker cabinet loses high-frequency output, imme-
a level that is uncomfortable. If you experi- diately remove power from the unit and wait for two to three
ence any discomfort or ringing in the ears, or minutes. They should allow the poly switch to reset. Re-
suspect an hearing loss, you should consult apply power and check the performance of the high-fre-
an audiologist. quency driver before continuing with the power reduced to a
level that does not cause the poly switch to interrupt the sig-
nal.
3
Connecting the Speakers
Phone Plug Wiring
Phone plugs for connection to the phone jack inputs should be wired as
shown to the right. Be sure to use proper speaker cable NOT shielded
instrument or line cable for all speaker connections.
1 :COLD ()
Full-range Connection
Each speaker features four input/parallel connectorstwo 1/4 phone jacks and two Neutrik NL4MP connectors.
Use either a phone jack or a Neutrik connector to receive input from your sound system/power amplifier. One of
the spare connectors can be used to parallel-connect an additional speaker (keeping in mind the impedance consid-
erations mentioned below).
L L L
SPEAKER SPEAKER
SYSTEMS SYSTEMS
R R R
Impedance Considerations
When connecting speakers in parallel be sure to check the rated load impedance of the power amplifier. Most
power amplifiers are capable of safely driving speakers with minimum impedance of 8 ohms or 4 ohms. A pair of
parallel-connected 8-ohm speakers have a total impedance of 4 ohms. The S112V/S115V/SM10V/SM12V/
SM15V/SW115V/SW118V are 8-ohm speakers, and two of these can safely be paralleled on one output. The
S215V/SW218V, however, has an impedance of 4 ohms and should not be parallel-connected with another
S215V/SW218V or any other model. These models can be connected in parallel, however, if you are using a
power amplifier that can safely drive load impedances of 2 ohms or lower.
4
Subwoofers and the P-Series Power Amplifiers
Adding subwoofers to speaker systems like the one shown in the diagram can provide superior dynamic range and
ENGLISH
overall sound quality. After inputting the line-level audio from the preamplifier or mixing console into the Yamaha
P-series power amplifiers (P7000S/P5000S/P3500S/P2500S), the separate frequency bands are outputted from the
amplifiers.
TWO-CHANNEL
MIXING GRAPHIC P-SERIES
CONSOLE EQUALIZER POWER AMPLIFIERS SPEAKER
SYSTEM
A A
FREQUENCY=90Hz
B B SUBWOOFER
SUBWOOFER
A A
B B
SUBWOOFER
P-SERIES SUBWOOFER
POWER AMPLIFIERS
5
Specifications
Model SM10V S112V SM12V S115V SM15V S215V
Enclosure Bass reflex type
Speaker Unit LF 10" cone 12" cone 15" cone 15" cone 2
HF 1" V.C. driver 2" V.C. driver
Frequency Response 70Hz-20kHz 60Hz-16kHz 55Hz-16kHz 42Hz-16kHz
Power Capacity NOISE* 125W 175W 250W 500W
PGM 250W 350W 500W 1000W
MAX 500W 700W 1000W 2000W
Nominal Impedance 8 4
Sensitivity 96dB SPL (1W, 1m) 97dB SPL (1W, 1m) 99dB SPL (1W, 1m) 99dB (1W, 1m)
Nominal Dispersion Horizontal 40 90 40 90 40 90
Vertical 60 40 90 40 90 40
Crossover Frequency 1.8kHz 2kHz 1.7kHz 1.5kHz
Input Connectors 1/4" phone jack 2, SPEAKON Neutrik NL4MP 2
Dimensions (WHD) 560353277 420 632 333 632 414 351 489 719 377 719 483 343 495 1167 597
Weight 13.4kg 20.8kg 21.4kg 29.4kg 28.0kg 47.2kg
SW115V/SW118V SW218V
*: EIA RS-426
Unit: mm
6
ClubV.book Page 32 Tuesday, February 14, 2006 9:58 AM
Frequency Response/Impedance
SM10V S115V/SM15V
110 110
100 100
RESPONSE(dB)
RESPONSE(dB)
90 90
80 80
16 16
70 8 70 8
4 4
60 60
20 100 1k 10k 20 100 1k 10k
FREQUENCY(Hz) FREQUENCY(Hz)
S112V/SM12V S215V
110 110
100 100
RESPONSE(dB)
RESPONSE(dB)
90 90
80 80 16
16 8
70 70 4
8
4 2
60 60
20 100 1k 10k 20 100 1k 10k
FREQUENCY(Hz) FREQUENCY(Hz)
SW115V SW118V
110 110
100 100
RESPONSE(dB)
RESPONSE(dB)
90 90
80 80
16 16
70 70
8 8
4 4
60 60
20 100 1k 10k 20 100 1k 10k
FREQUENCY(Hz) FREQUENCY(Hz)
SW218V
110
100
RESPONSE(dB)
90
80 16
8
70 4
2
60
20 100 1k 10k
FREQUENCY(Hz)
32
ClubV.book Page 33 Tuesday, February 14, 2006 9:58 AM
Horizontal Directivity
ENGLISH
SM10V
0
0
500Hz 4kHz
33
33
30
30
0
0
1kHz 8kHz
2kHz 30
0
60
16kHz 30
0
60
90 90
50 50 40 30 20 10 0 0 10 20 30 40
40 30 20 10 0 0 10 20 30 40 50 50
270 270
DEUTSCH
0
0
0
0 12
24
12
24
0
0
0
0
15
15
21
21
180
180
S112V/SM12V
FRANAIS
0
0
500Hz 4kHz
33
30
33
30
0
1kHz 8kHz
2kHz 30
0
60
16kHz 30
0
60
90 90
50 40 30 20 10 0 0 10 20 30 40 50
270
50 40 30 20 10 0 0 10 20 30 40 50
270
ESPAOL
0
0 12 0
0
24 24
12
0
0
0
0
15
15
21
21
180
180
S115V/SM15V
0
0
500Hz 4kHz
33
33
30
30
0
0
1kHz 8kHz
2kHz 30
0
60
16kHz 30
0
60
90 90
50 50 40 30 20 10 0 0 10 20 30 40
40 30 20 10 0 0 10 20 30 40 50 50
270 270
0
0
0
0 12
24
12
24
0
0
0
0
15
15
21
21
180
180
S215V
0
0
500Hz 4kHz
33
33
30
30
0
0
1kHz 8kHz
2kHz 30
0
60
16kHz 30
0
60
90 90
50 50 40 30 20 10 0 0 10 20 30 40
40 30 20 10 0 0 10 20 30 40 50 50
270 270
0
0
0
0 12
24
12
24
0
0
0
0
15
15
21
21
180
180
33
ClubV.book Page 34 Tuesday, February 14, 2006 9:58 AM
Vertical Directivity
SM10V
0
500Hz 4kHz
33
30
33
30
0
1kHz 8kHz
2kHz 30
0
60
16kHz 30
0
60
90 90
50 40 30 20 10 0 0 10 20 30 40 50
270
50 40 30 20 10 0 0 10 20 30 40 50
270
0
0 12 0 0
24 24
12
0
0
15
15
21
21
180
180
S112V/SM12V
0
0
500Hz 4kHz
33
30
33
30
0
1kHz 8kHz
2kHz 30
0
60
16kHz 30
0
60
90 90
50 40 30 20 10 0 0 10 20 30 40 50
270
50 40 30 20 10 0 0 10 20 30 40 50
270
0
0
0
24
12 0 12
24
0
0
0
0
15
15
21
21
180
180
S115V/SM15V
0
500Hz 4kHz
33
33
30
30
0
1kHz 8kHz
2kHz 30
0
60
16kHz 30
0
60
90 90
50 40 30 20 10 0 0 10 20 30 40 50 50 40 30 20 10 0 0 10 20 30 40 50
270 270
0 0
0 12 0 12
24 24
0
0
0
0
15
15
21
21
180
180
S215V
0
500Hz 4kHz
33
33
30
30
0
1kHz 8kHz
2kHz 30
0
60
16kHz 30
0
60
90 90
50 40 30 20 10 0 0 10 20 30 40 50 50 40 30 20 10 0 0 10 20 30 40 50
270 270
0 0
0 12 0 12
24 24
0
0
0
0
15
15
21
21
180
180
34
For details of products, please contact your nearest Yamaha Die Einzelheiten zu Produkten sind bei Ihrer unten aufgefhrten
representative or the authorized distributor listed below. Niederlassung und bei Yamaha Vertragshndlern in den jeweiligen
Bestimmungslndern erhltlich.
Pour plus de dtails sur les produits, veuillez-vous adresser Yamaha ou
au distributeur le plus proche de vous figurant dans la liste suivante. Para detalles sobre productos, contacte su tienda Yamaha ms cercana
o el distribuidor autorizado que se lista debajo.
HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650
Tel: +81-53-460-2441
PA19
Yamaha Pro Audio global web site
http://www.yamahaproaudio.com/
Yamaha Manual Library
http://www.yamaha.co.jp/manual/