M.tech Cadcam
M.tech Cadcam
(Autonomous)
(Approved by AICTE | NAAC Accreditation with A Grade | Accredited by NB A | Affiliated to JNTUH)
Dundigal, Hyderabad - 500 043, Telangana
MASTER OF TECHNOLOGY
CAD / CAM
Academic Council: The Academic Council is the highest academic body of the institute and is responsible for the
maintenance of standards of instruction, education and examination within the institute. Academic Council is an
authority as per UGC regulations and it has the right to take decisions on all academic matters including academic
research.
Academic Autonomy: Means freedom to an institute in all aspects of conducting its academic programs, granted by
UGC for Pro moting Excellence.
Academic Year : It is the period necessary to complete an actual course of study within a year. It comprises two
consecutive semesters i.e., Even and Odd semester.
AICTE: Means All India Council for Technical Education, New Delhi.
Autonomous Institute: Means an institute designated as autonomous by University Grants Commission (UGC),
New Delh i in concurrence with affiliating Un iversity (Jawaharlal Nehru Technolo gical University, Hyderabad) and
State Government.
Backlog Course: A course is considered to be a backlog course if the student has obtained a failure grade (F) in that
course.
Basic Sciences: The courses offered in the areas of Mathematics, Physics, Chemistry, Biology etc., are considered
to be foundational in nature.
Betterment: Betterment is a way that contributes towards imp rovement of the students grade in any course(s). It
can be done by either (a) re-appearing or (b) re-registering for the course.
Board of Studies (BOS): BOS is an authority as defined in UGC regulations, constituted by Head of the
Organization for each of the departments separately. They are responsible for curriculu m design and updation in
respect of all the programs offered by a depart ment.
Certificate course: It is a course that makes a student gain hands-on experience and skill required for holistic
development in a specific area/field.
Choice Based Credit System: The credit based semester system is one which provides flexibility in designing
curriculu m and assigning credits based on the course content and hours of teaching along with provision of choice
for the student in the course selection.
Compulsory course: Course required to be undertaken for the award of the degree as per the program.
Commission: Means University Grants Co mmission (UGC), New Delhi.
Continuous Internal Exami nation: It is an examination conducted towards internal assessment.
Course: A course is a subject offered by the University for learning in a part icu lar semester.
Course Outcomes: The essential skills that need to be acquired by every student through a course.
Credit: A credit is a unit that gives weight to the value, level or time requirements of an academic course. The
number of 'Contact Hours' in a week of a particular course determines its credit value. One credit is equivalent to
one lecture hour per week.
Credit poi nt: It is the product of grade point and number of credits for a course.
Cumulati ve Grade Point Average (CGPA): It is a measure of cumulative performance of a student over all the
completed semesters. The CGPA is the ratio of total cred it points secured by a student in various courses in all
semesters and the sum of the total cred its of all courses in all the semesters. It is expressed upto two decimal places.
Curriculum: Curriculu m incorporates the planned interaction of students with instructional content, materials,
resources and processes for evaluating the attainment of Program Educational Ob jectives.
Degree with Specialization: A student who fulfills all the program requirements of her/his discipline and
successfully completes a specified set of professional elective courses in a specialized area is eligible to receive a
degree with specialization like St ructural Engineering, Embedded Systems, CSE, etc.
i| P a g e
Department: An academic entity that conducts relevant curricular and co -curricular activ ities, involving both
teaching and non-teaching staff and other resources in the process of study for a degree.
Detention in a course: Student who does not obtain min imu m prescribed attendance in a course shall be detained in
that particular course.
Dropping from the Semester:A student who doesnt want to register for any semester can apply in writing in
prescribed format before co mmencement of that semester.
Electi ve Course: A course that can be chosen from a set of courses. An elective can be Professional Elective and/or
Open Elective.
Evaluati on: Evaluation is the process of judging the academic performance of the student in her/his cou rses. It is
done through a combination of continuous internal assessment and semester end examinations.
Grade: It is an index of the performance of the students in a said course. Grades are indicated by alphabets.
Grade Poi nt: It is a numerical weight allotted to each letter grade on a 10 point scale.
Institute: Means Institute of Aeronautical Engineering, Hyderabad unless indicated otherwise by the context.
Massive Open Online Course (MOOC): MOOC courses inculcate the habit of self learning. MOOC
courses would be additional choices in all the elective group courses.
Pre-requisite: A course, the knowledge of which is required for registration into higher level course.
Core: The courses that are essential constituents of each engineering discipline are c ategorized as professional core
courses for that discipline.
Professional Electi ve: A course that is discipline centric. An appropriate choice of min imu m nu mber of such
electives as specified in the program will lead to a degree with specialization.
Program: Means, Master of Technology (M.Tech) degree program / UG degree program: B.Tech.
Program Educational Objecti ves: The broad career, professional and personal goals that every student will
achieve through a strategic and sequential action plan.
Project work: It is a design or research based work to be taken up by a student during his/her second year to
achieve a particular aim. It is a credit based course and is to be planned carefully by the student.
Re-Appearing: A student can reappear only in the s emester end examination for the theory component of a course,
subject to the regulations contained herein.
Registration: Process of enrolling into a set of courses in a semester of a Program.
Regulati ons: The regulations, common to all M.Tech programs offered by Institute are designated as IARE-R16
and are binding on all the stakeholders.
Semester: It is a period of study consisting of 15 to 18 weeks of academic work equivalent to normally 90 wo rking
days. The odd semester starts usually in July and even semester in December.
Semester End Exami nations: It is an examination conducted for all courses offered in a semester at the end of the
semester.
S/he: Means she and he both.
Student Outcomes: The essential skill sets that need to be acquired by every student during her/his program of
study. These skill sets are in the areas of employability, entrepreneurial, social and behavioral.
Uni versity: Means the Jawaharlal Nehru Technological University Hyderabad, Hyderabad.
Withdraw from a Course: Withdrawing fro m a course means that a student can drop from a course within the first
two weeks of the odd or even semester (deadlines are different for summer sessions). However s/he can choose a
substitute course in place of it by exercising the option within 5 working days fro m the date of withdrawal.
Words he, him, his, occur, they i mpl y she, her, hers also.
ii | P a g e
FOREWORD
The autonomy is conferred to Institute of Aeronautical Engineering (IARE), Hyderabad by University Grants
Commission (UGC), New Delhi based on its performance as well as future commitment and competency to
impart quality education. It is a mark of its ability to function independently in accordance with the set norms
of the monitoring bodies like J N T University Hyderabad (JNTUH), Hyderabad and AICTE. It reflects the
confidence of the affiliating University in the autonomous institution to uphold and maintain standards it
expects to deliver on its own behalf and thus awards degrees on behalf of the college. Thus, an autonomous
institution is given the freedom to have its own curriculum, examination system and monitoring
mechanism, independent of the affiliating University but under its observance.
IARE is proud to win the credence of all the above bodies monitoring the quality in education and has gladly
accepted the responsibility of sustaining, if not improving upon the standards and ethics for which it has been
striving for more than a decade in reaching its present standing in the arena of contemporary technical
education. As a follow up, statutory bodies like Academic Council and Boards of Studies are constituted with
the guidance of the Governing Body of the institute and recommendations of the JNTUH to frame the
regulations, course structure and syllabi under autonomous status.
The autonomous regulations, course structure and syllabi have been prepared after prolonged and detailed
interaction with several expertise solicited from academics, industry and research, in accordance with the
vision and mission of the institute to order to produce a quality engineering graduate to the society.
All the faculty, parents and students are requested to go through all the rules and regulations carefully. Any
clarifications needed are to be sought at appropriate time and with principal of the college, without
presumptions, to avoid unwanted subsequent inconveniences and embarrassments. The Cooperation of all the
stake holders is sought for the successful implementation of the autonomous system in the larger interests of
the college and brighter prospects of engineering graduates.
PRINCIPAL
iii | P a g e
INSTITUTE OF AERONAUTICAL ENGINEERING
(Autonomous)
ACADEMIC REGULATIONS
M. Tech. Regular Two Year Degree Program
(for the batches admitted from the academic year 2016 - 17)
For pursuing two year postgraduate Master Degree program of study in Engineering (M.Tech) offered by
Institute of Aeronautical Engineering under Autonomous status and herein after referred to as IARE.
The Indian Higher Education Institutions (HEIs) are changing from the conventional course
structure to Choice Based Credit System (CBCS) along with introduction to semester system at first
year itself. The semester system helps in accelerating the teaching learning process and enables
vertical and horizontal mobility in learning.
The credit based semester system provides flexibility in designing curriculum and assigning credits
based on the course content and hours of teaching. The choice based credit system provides a
cafeteria type approach in which the students can take courses of their choice, learn at their own
pace, undergo additional courses and acquire more than the required credits and adopt an
interdisciplinary approach to learning.
Choice Based Credit System (CBCS) is a flexible system of learning and provides choice for
students to select from the prescribed elective courses. A course defines learning objectives and
learning outcomes and comprises of lectures / tutorials / laboratory work / field work / project work /
comprehensive examination / viva / seminars / assignments / presentations / self-study etc. or a
combination of some of these.
Under the CBCS, the requirement for awarding a degree is prescribed in terms of number of credits
to be completed by the students.
1
3.0 ELIGIBILITY FOR ADMISSION
The admissions for category A and B seats shall be as per the guidelines of Telangana State Council
for Higher Education (TSCHE) in consonance with government reservation policy.
a) Under Category A: 70% of the seats are filled based on GATE/PGECET ranks.
b) Under Category B: 30% seats are filled on merit basis as per guidelines of TSCHE.
Every specialization of the M.Tech programme will be placed in one of the seven groups as listed in
the Table 1.
Table 1: Group of Courses
There shall be four professional elective groups out of which students can choose not more than
two courses from each group. Overall, students can opt for four professional elective courses
2
which suit their project work in consultation with the faculty advisor/mentor. In addition, one
course from each of the two open electives has to be selected. A student may also opt for more
elective courses in his/her area of interest.
The institute shall follow semester pattern. An academic year shall consist of a first semester and a
second semester and the summer term. Each semester shall be of 23 weeks (Table 2) duration and
this period includes time for course work, examination preparation and conduct of examinations.
Each main semester shall have a minimum of 90 working days; out of which number of contact days
for teaching / practical shall be 75 and 15 days shall be for examination preparation. The duration for
each semester shall be a minimum of 17 weeks of instruction. The Academic Calendar is declared at
the beginning of the academic year as given in Table 2.
Table 2: Academic Calendar
I Spell Instruction Period 9 weeks
I Mid Examinations 1 week
FIRST SEMESTER II Spell Instruction Period 8 weeks 21 weeks
(23 weeks) II Mid Examinations 1 week
Preparation and Practical Examinations 2 weeks
Semester End Examinations 2 weeks
Semester Break and Supplementary Exams 2 weeks
I Spell Instruction Period 9 weeks
I Mid Examinations 1 week
SECOND SEMESTER II Spell Instruction Period 8 weeks 21 weeks
(23 weeks) II Mid Examinations 1 Week
Preparation & Practical Examinations 2 weeks
Semester End Examinations 2 weeks
Summer Vacation 4 weeks
THIRD SEMESTER Project Work Phase - I 18 weeks
FOURTH SEMESTER Project Work Phase - II 18 weeks
A student shall be declared eligible for the award of M.Tech degree, if s/he pursues a course of study
and completes it successfully in not less than two academic years and not more than four academic
years. A student, who fails to fulfill all the academic requirements for the award of the degree within
four academic years from the year of his/her admission, shall forfeit his/her seat in M.Tech course.
a) A student will be eligible for the award of M.Tech degree on securing a minimum of 5.0/10.0
CGPA.
b) In the event of non-completion of project work and/or non-submission of the project report by the
end of the fourth semester, the candidate shall re-register by paying the semester fee for the
3
project. In such a case, the candidate will not be permitted to submit the report earlier than three
months and not later than six months from the date of registration.
The curriculum shall comprise Core Courses, Elective Courses, Laboratory Course, Comprehensive
Examination, Internship and Project Work. The list of elective courses may include subjects from
allied disciplines also.
Each Theory and Laboratory course carries credits based on the number of hours/week as
follows:
4
9.0 EVALUATION METHODOLOGY
9.1 Theory Course:
Each theory course will be evaluated for a total of 100 marks, with 30 marks for Continuous
Internal Evaluation (CIA) and 70 marks for Semester End Examination (SEE). Out of 30 marks
allotted for CIE during the semester, marks are awarded by taking average of two sessional
examinations.
COMPONENT THEORY
Type of CIE Exam Technical Seminar and TOTAL MARKS
Assessment (Sessional) Term Paper
Max. CIA 25 5 30
5
9.2 Laboratory Course:
9.2.1 Each lab will be evaluated for a total of 100 marks consisting of 30 marks for internal
assessment and 70 marks for semester end lab examination. Out of 30 marks of internal
assessment, continuous lab assessment will be done for 20 marks for the day to day
performance and 10 marks for the final internal lab assessment. The semester end lab
examination for 70 marks shall be conducted by two examiners, one of them being a
internal examiner and another is external examiner, both nominated by the Principal from
the panel of experts recommended by Chairman, BOS.
9.2.2 All the drawing related courses are evaluated in line with lab courses. The distribution
shall be 30 marks for internal evaluation (20 marks for daytoday work, and 10 marks
for internal tests) and 70 marks for semester end lab examination. There shall be ONE
internal test for 10 marks each in a semester.
Meeting with the global requirements, to inculcate the habit of self learning and in
compliance with UGC guidelines, MOOC (Massive Open Online Course) courses have been
introduced as electives.
9.3.1 The proposed MOOC Courses would be additional choices in all the elective groups
subject to the availability during the respective semesters and respective departments will
declare the list of the courses at the beginning of the semester. Course content for the
selected MOOC Courses shall be drawn from respective MOOCs links or shall be
supplied by the department. Course will be mentored by faculty members and Assessment
and evaluation of the courses shall be done by the department.
9.3.2 There shall be one Mid Sessional Examination (Quiz exam for 30 marks) after 8 weeks of
the commencement of the course and semester end evaluation (Descriptive exam for 70
marks) shall be done along with other regular courses.
9.3.3 Two credits will be awarded upon successful completion of each MOOC Course.
9.3.4 Students interested in doing MOOC Courses shall register the course title at their
department office at the start of the semester against the courses that are announced by the
department.
9.4 Project work
Normally, the project work should be carried out at Host Institute (Institute of Aeronautical
Engineering). However, it can also be carried out in any of the recognized Educational
Institutions, National Laboratories, Research Institutions, Industrial Organizations, Service
Organizations or Government Organizations with the prior permission from the guide and
concerned Head of the Department. A student shall submit the outcome of the project work in
the form of a dissertation.
9.4.1 The student shall submit the project work synopsis at the end of III semester for Phase-I
of project evaluation. The Phase-I of project work shall be evaluated by Project Review
Committee (PRC) at the end of the third semester for a maximum of 100 marks. Head
of the Department (HOD) shall constitute a PRC comprising of senior faculty of the
specialization, Guide and Head of the Department.
6
9.4.2 The first phase of project work is to be carried out in IV semester for Phase II of Project
work. The student will be allowed to appear for final viva voce examination at the end
of IV semester only if s/he has submitted s/he project work in the form of paper for
presentation / publication in a conference/journal and produce the proof of acceptance
of the paper from the organizers/publishers.
9.4.3 The student shall submit the project work in the form of dissertation at least four weeks
ahead of the completion of the program. Head of the Department shall constitute an
Internal Evaluation Committee (IEC) comprising of the Chairman BOS (PG), HOD and
Guide. As per convenes of all meeting for open pre-submission seminar evaluation of
the student. If the open pre-submission seminar by a student is not satisfactory, another
seminar shall be scheduled within two weeks.
The evaluation of the project work and the marks allotted are as under:
Project
S.No Phases Mode Evaluation Committee Marks
Continuous
1 evaluation at the end Guide 30
of III Semester
Phase - I Project Review Committee (PRC)
Evaluation at the end
comprising of senior faculty of 70
2 of
the specialization, guide and
III Semester
HOD.
Total(Phase I) 100
The Internal Evaluation
An open pre- Committee (IEC) comprising of
3 submission seminar the Chairman, BOS (PG), HOD 30
by the student and guide wherein the HOD
convenes its meeting.
Phase - II
End Semester The External Evaluation
Examination (An Committee (EEC) comprising of
7
4 open seminar External Examiner, HOD and
70
followed by viva- guide wherein the HOD shall be
voce) the chairman of the committee.
Total(Phase-II) 100
9.4.4 As soon as a student submits his project work, Principal shall appoint the External
Examiner among the panel of examiners recommended by the Chairman, BOS (PG).
9.4.5 The Principal shall schedule the End Semester Examination in project work soon after the
completion of the study of program and a student can appear for the same provided s/he
has earned successfully all the requisite credits. The student shall produce the dissertation
duly certified by the guide and HOD during the Examination.
9.4.6 The project reports of M.Tech students who have not completed their course work
successfully will be evaluated in that semester itself and the result sent confidentially to
the Controller of Examinations. The results of the project work evaluation will be
declared by the Controller of Examinations only after the successful completion of the
courses by those students.
7
9.5 Comprehensive Examination
The comprehensive examination is aimed at assessing the students understanding of various
Foundation, Skill and Core courses studied by the end of II semester and is intended to test
the student's grasp of the chosen field of study. The comprehensive examination is an online
test evaluated for 100 marks.
10.1 It is desirable for a candidate to put on 100% attendance in each course. In every course
(theory/laboratory), student has to maintain a minimum of 80% attendance including the
days of attendance in sports, games, NCC and NSS activities to be eligible for appearing
in Semester End Examination of the course.
10.2 For cases of medical issues, deficiency of attendance in each course to the extent of 15%
may be condoned by the College Academic Committee (CAC) on the recommendation of
Head of the Department if his/her attendance is between 80% to 70% in every course,
subjected to submission of medical certificate and other needful documents to the
concerned department.
10.3 The basis for the calculation of the attendance shall be the period prescribed by the
institute by its calendar of events. For late admission, attendance is reckoned from the
date of admission to the program.
10.3 However, in case of a student having less than 70% attendance in any course, s/he shall
be detained in the course and in no case such process will be relaxed.
10.4 Students whose shortage of attendance is not condoned in any subject are not eligible to
write their semester end examination of that courses and their registration shall stand
cancelled.
10.5 A prescribed fee shall be payable towards Condonation of shortage of attendance.
10.6 A candidate shall put in a minimum required attendance at least in three (3) theory
courses for getting promoted to next higher class / semester. Otherwise, s/he shall be
declared detained and has to repeat semester.
10.7 A student shall not be promoted to the next semester unless he satisfies the attendance
requirement of the present semester, as applicable. They may seek readmission into that
semester when offered next. If any candidate fulfills the attendance requirement in the
present semester, s/he shall not be eligible for readmission into the same class.
11.1 Semester end examination shall be conducted by the Controller of Examinations (COE) by
inviting Question Papers from the External Examiners.
11.2 Question papers may be moderated for the coverage of syllabus, pattern of questions by
Semester End Examination Committee chaired by Head of the Department one day before
the commencement of semester end examinations.
11.3 Internal Examiner shall prepare a detailed scheme of valuation.
11.4 The answer papers of semester end examination should be evaluated by the internal
examiner immediately after the completion of exam and the award sheet should be
submitted to COE in a sealed cover before the same papers are kept for second evaluation
by external examiner.
8
11.5 In case of difference is more than 15% of marks, the answer paper shall be re-evaluated by
a third examiner appointed by the Examination Committee and marks awarded by him shall
be taken as final.
11.6 HOD shall invite 3-9 external examiners to evaluate all the end semester answer scripts on
a prescribed date(s). Practical laboratory exams are conducted involving external
examiners.
11.7 Examination Control Committee shall consolidate the marks awarded by internal and
external examiners to award grades.
13.1 Performances of students in each course are expressed in terms of marks as well as in
Letter Grades based on absolute grading system. The UGC recommends a 10 point
grading system with the following letter grades as given below:
13.2 A student obtaining Grade F shall be declared as failed and will be required to reappear in
the examination.
9
13.3 At the end of each semester, the institute issues grade sheet indicating the SGPA and
CGPA of the student. However, grade sheet will not be issued to the student if s/he has
any outstanding dues.
The UGC recommends to compute the Semester Grade Point Average (SGPA) and Cumulative
Grade Point Average (CGPA). The credit points earned by a student are used for calculating the
Semester Grade Point Average (SGPA) and the Cumulative Grade Point Average (CGPA), both
of which are important performance indices of the student. SGPA is equal to the sum of all the
total points earned by the student in a given semester divided by the number of credits registered
by the student in that semester. CGPA gives the sum of all the total points earned in all the
previous semesters and the current semester divided by the number of credits registered in all
these semesters. Thus,
n n
SGPA Ci Gi / Ci
i 1 i 1
Where, Ci is the number of credits of the ith course and Gi is the grade point scored by the
student in the ith course and n represent the number of courses in which a students is
registered in the concerned semester.
m m
CGPA C j S j / C j
j 1 j 1
Where, S j is the SGPA of the jth semester and Cj is the total number of credits upto the
semester and m represent the number of semesters completed in which a student
registered upto the semester.
The SGPA and CGPA shall be rounded off to 2 decimal points and reported in the
transcripts.
Credit Point
Course Name Course Credits Grade letter Grade point
(Credit x Grade)
Course 1 3 A 8 3 x 8 = 24
Course 2 4 B+ 7 4 x 7 = 28
Course 3 3 B 6 3 x 6 = 18
Course 4 3 O 10 3 x 10 = 30
Course 5 3 C 5 3 x 5 = 15
Course 6 4 B 6 4 x 6 = 24
20 139
10
15.2 Illustration for CGPA
The following academic requirements shall be met for the award of M .Tech degree.
17.1 Student shall register and acquire minimum attendance in all courses and secure 80
credits.
17.2 A student who fails to earn 80 credits within four consecutive academic years from the
year of his/her admission with a minimum CGPA of 5.0, shall forfeit his/her degree and
his/her admission stands cancelled.
a) In case a student takes more than one attempt in clearing a course, the final marks secured
shall be indicated by * mark in the grade sheet.
b) All the candidates who register for the semester end examination will be issued grade sheet by
the Institute. Apart from the semester wise grade sheet, the institute will issue the provisional
certificate subject to the fulfillment of all the academic requirements.
11
19.0 IMPROVEMENT OF GRADE:
A candidate, after becoming eligible for the award of the degree, may reappear for the final
examination in any of the theory courses as and when conducted for the purpose of improving the
aggregate and the grade. But this reappearance shall be within a period of two academic years
after becoming eligible for the award of the degree.
However, this facility shall not be availed of by a candidate who has taken the Original Degree
Certificate. Candidates shall not be permitted to reappear either for CIE in any course or for
Semester End Examination (SEE) in laboratory courses (including Project Viva-voce) for the
purpose of improvement.
The college shall institute prizes and medals to meritorious students annually on Graduation Day.
This will greatly encourage the students to strive for excellence in their academic work.
23.0 DISCIPLINE
Every student is required to observe discipline and decorum both inside and outside the institute
and not to indulge in any activity which will tend to bring down the honor of the institute. If a
student indulges in malpractice in any of the theory / practical examination, continuous
assessment examinations he/she shall be liable for punitive action as prescribed by the Institute
from time to time.
The institute shall form a Grievance Redressal Committee for each course in each department
with the Course Teacher and the HOD as the members. This Committee shall solve all grievances
related to the course under consideration.
12
25.0 TRANSITORY REGULATIONS
25.1 A student who has been detained in any semester of previous regulations for not
satisfying the attendance requirements shall be permitted to join in the corresponding
semester of this regulation.
25.2 Semester End Examination in each course under the regulations that precede immediately
these regulations shall be conducted three times after the conduct of last regular
examination under those regulations. Thereafter, the failed students, if any, shall take
examination in the equivalent papers of these regulations as suggested by the Chairman,
BOS concerned.
The Institute from time to time may revise, amend or change the regulations, scheme of
examinations and syllabi if found necessary and on approval by the Academic Council and the
Governing Body shall come into force and shall be binding on the students, faculty, staff, all
authorities of the Institute and others concerned.
13
INSTITUTE OF AERONAUTICAL ENGINEERING
(Autonomous)
CAD / CAM
COURSE STRUCTURE
I SEMESTER
Periods Scheme of
Subject
Credits
Course Name per Examination
Area
Course
Category week Max. Marks
Code
L T P CIA SEE Total
THEORY
BCC001 Advanced CAD PC Core 3 - - 3 30 70 100
Numerical Method for Partial Differential
BCC002 PC Core 3 - - 3 30 70 100
Equations
BCC003 Rapid Prototype Technologies PC Core 3 - - 3 30 70 100
Professional Elective I PE Elective 3 - - 3 30 70 100
Professional Elective II PE Elective 3 - - 3 30 70 100
Open Elective I OE Elective 3 - - 3 30 70 100
BCC301 MOOC - I (Massive Open Online Course) PE Elective - - 3 2 30 70 100
PRACTICAL
BCC101 Computer Aided Design Laboratory PC Core - - 3 2 30 70 100
TOTAL 18 00 06 22 240 560 800
II SEMESTER
Periods Scheme of
Credits
Subject
Course
Category week Max. Marks
Code
L T P CIA SEE Total
THEORY
BCC004 Design of Hydraulic and Pneumatic System PC Core 3 - - 3 30 70 100
BCC005 Computer Aided Manufacturing PC Core 3 - - 3 30 70 100
BCC006 Flexible Manufacturing System PC Core 3 - - 3 30 70 100
Professional Elective III PE Elective 3 - - 3 30 70 100
Professional Elective IV PE Elective 3 - - 3 30 70 100
Open Elective II OE Elective 3 - - 3 30 70 100
PRACTICAL
Computer Aided Machining and Robotics
BCC102 PC Core - - 3 2 30 70 100
Laboratory
Application Development Mini Project
BCC103 - Core - - 3 2 30 70 100
Laboratory
TOTAL 18 00 06 22 240 560 800
14
III SEMESTER
Periods Scheme of
Subject
Credits
per Examination
Area
Course
Course Name Category week Max. Marks
Code
L T P CIA SEE Total
THEORY
BCC401 Seminar and Technical Writing PC Core - - 3 2 30 70 100
BCC302 MOOC-II (Massive Open Online Course) PE Elective - - 3 2 30 70 100
PRACTICAL
BCC501 Comprehensive Examination - Core - - - 2 30 70 100
BCC601 Project Work (Phase -I) - Core - - - 10 100 - 100
TOTAL 00 00 06 16 190 210 400
IV SEMESTER
Periods Scheme of
Subject
Credits
per Examination
Area
Course
Course Name Category week Max. Marks
Code
L T P CIA SEE Total
BCC602 Project Work (Phase -II) - Core - - - 20 30 70 100
TOTAL 00 00 00 20 30 70 100
15
PROFESSIONAL ELECTIVES
16
OPEN ELECTIVES-I
OPEN ELECTIVES-II
17
SYLLABI
18
ADVANCED CAD
I Semester: CAD/CAM
Course Code Category Hours / Week Credits Maximum Marks
L T P C CIA SEE Total
BCC001 Core
3 - - 3 30 70 100
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understand of basic trends in design and modeling applicable to CAD/CAM.
II. Applying the CAD tools for designing.
III. Create surface and geometric models.
Parametric representation of surfaces, plane surface, rule surface, surface of revolution, tabulated
cylinder.
UNIT-IV PARAMETRIC REPRESENTATION OF SYNTHETIC SURFACES Classes: 09
Parametric representation of synthetic surfaces: : Hermite Bicubic surface, Bezier surface, Bezier Spline
surface, COONs surface, Blending surface Sculptured surface, Surface manipulation; Displaying,
Segmentation, Trimming, Intersection, Transformations (both 2D and 3D).
19
Text Books:
1. Ibrhim Zeid, Mastering CAD/CAM, Tata McGraw Hill, 2nd Edition, 2013.
2. P. N. Rao, CAD/CAM Principles and Applications, Tata McGraw Hill, 3 rd Edition, 2010.
3. M. P. Groover, E. Zimmers, CAD/ CAM Computer- Aided Design and Manufacturing, Pearson, 1st
Edition, 2003.
4. R. Alavala Chennakesava, CAD/ CAM Concepts and Applications, PHI, 1st Edition, 2013.
Reference Books:
1. Farid Amirouche, Principles of Computer-Aided Design and Manufacturing, Pearson, 2nd Edition,
2004.
2. P. Radha Krishnan, CAD/ CAM/ CIM, New Age International, 4th Edition, 2016.
3. Warren. S. Seames, Computer Numerical Control Concepts and Programming, Delmar Cengage
Learning, 4th Edition, 2013.
Web References:
1. http://nptel.ac.in/courses/112102101/
2. http://www.journals.elsevier.com/computer-aided-design
3. https://www.elsevier.com/books/surface-modeling-for-cad-cam/choi/978-0-444-88482-4
E-Text Books:
1. http://sbmpme.blogspot.in/2011/01/cad-cam-cim-p-radhakrishnan.html
2. https://www.scribd.com/doc/228624725/cad-cam-text-book-by-P-N-RAO
20
NUMERICAL METHODS FOR PARTIAL DIFFERENTIAL EQUATIONS
I Semester: CAD/CAM
21
Reference Books:
1. A. R. Mitchel and D. F. Griffiths, The Finite Difference Methods in Partial Differential equation, John
Wiley, 1st Edition, 1980.
2. Larry J. Segerlind, Applied Finite Element Analysis, John Wiley, 2nd Edition, 1984.
Web References:
1. http://ocw.mit.edu/courses/aeronautics-and-astronautics/16-920j-numerical-methods-for-partial-
differential-equations-sma-5212-spring-2003/lecture-notes/
2. https://espace.library.uq.edu.au/view/UQ:239427/Lectures_Book.pdf
3. http://cms.unipune.ac.in/programmes/2006-07/modules/0613-2/resources/NSPDE.pdf
E-Text Books:
1. http://www.e-booksdirectory.com/details.php?ebook=10166
2. http://www.e-booksdirectory.com/details.php?ebook=7400re
22
RAPID PROTOTYPE TECHNOLOGIES
I Semester: CAD/CAM
23
UNIT-V RAPID PROTOTYPING APPLICATIONS Classes: 09
RP Applications: Application, Material Relationship, Application in Design, Application in
Engineering, Analysis and P lanning, Aerospace Industry, Automotive Industry, Jewelry Industry, Coin
Industry, GIS application, Arts and Architecture. RP Medical and Bioengineering Applications:
Planning and simulation of complex surgery, Customized Implants & Prosthesis, Design and Production
of Medical Devices, Forensic Science and Anthropology, Visualization of Biomolecules.
Text Book:
1. Chua C.K., Leong K.F, LIM C.S, Rapid prototyping: Principles and Applications,World
Scientific publications, 3rd Edition, 2010.
Reference Books:
1. D.T Pham, S. S. Dony, Rapid Manufacturing, Springer, 1st Edition, 2001.
2.Paul F Jacobs, Rapid Prototyping & Manufacturing, Wohlers Associates, 2000
ASME Press, 1st Edition, 1996.
Web References:
1. http://nptel.ac.in/courses/112107077/38
2. http://web.iitd.ac.in/~pmpandey/MEL120_html/RP_document.pdf
E-Text Books:
1.https://books.google.co.in/books?id=4OYcyiDUpsQC&redir_esc=y
2.http://store.elsevier.com/Direct-Write-Technologies-for-Rapid-Prototyping-Applications/isbn-
9780121742317/
24
COMPUTER AIDED DESIGN LABORATORY
I Semester: CAD/CAM
OBJECTIVES:
The course should enable the students to:
I. Basic understanding of modern trends in design and manufacturing us ing CAD/CAM.
II. Advanced aspects of enabling computer aided technologies used in design.
III. Application of thermal analysis software.
LIST OF EXPERIMENTS
Week-1 Introduction to CAD and Tools
Creation of working drawing, creating geometry, constraining the profile, extracting a part using tools,
creating pattern of holes, translating rotating, mirroring, managing the specification tree. Creating sheets
and views, creating text and dimensions.
Week-2 Assembly of Part Drawing
creating an assembly, moving components, assembling existing components, creating bill of materials,
creating wire frame and surface geometry using generative shape design and sweep tools.
Week-3 Generation of Surfaces
Generation of Fergusons cubic surface patches, Bezier surface patches. Coons patch, import and export of
drawing from other software.
Week-4 Analysis of Model
Linear static analysis, automatic calculation of rigid body modes, uses specified eigen value shift, lumped
and consistent mass matrices. Buckling analysis, jacobi inverse iteration techniques, steady state harmonic
response, mode superposition method, overall structural and damping, linear dynamic analysis, non linear
static analysis, non-linear dynamic analysis. Steady state heat transfer analysis problems.
Week-5 Thermal Analysis
Transient heat transfer analysis. Familiarity with element library. Defining Boundary conditions,
multipoint constraint familiarity with different types of loads. Solution techniques, direct and iterative
solver. Results and analysis. Design optimization.
Reference Books:
1. Farid Amirouche, Principles of Computer-Aided Design and Manufacturing, Pearson, 2nd Edition,
2004.
2. P. Radha Krishnan, CAD/ CAM/ CIM, New Age International, 4th Edition, 2016.
3. Warren. S. Seames, Computer Numerical Control Concepts and Programming, Delmar Cengage
Learning, 4th Edition,
2013.
25
E-Text Books:
1.http://sbmpme.b logspot.in/2011/ 01/cad-cam-cim-p-radhakrishnan.html
2.https://www.scribd.com/doc/228624725/cad-cam-text -book-by-P-N-RA O
SOFTWARE AND HARDWARE REQUIRED FOR A BATCH OF 18 STUD ENTS
26
DES IGN OF HYDRAULIC AND PNEUMATIC S YSTEMS
Contact Cl asses: 45 Tutori al Cl asses: Nil Practical Classes: Nil Total Cl asses: 45
OBJ ECTIVES:
The course shoul d enable the students to:
I. Understand of basic hydraulic circuits and maintenance.
II. Design of hydraulic, pneumatic pumps and circuits.
III. Apply of pneumatic and hydraulic systems, automation in industrial equip ment.
Element of power pack, design of hydraulic power pack, line pressure, discharge and motor.
Selection, power pack size and capacity, importance of pressure relief valve and safety systems, heating and cooling
systems for hydraulic powe r pack.
27
Text B ooks:
1. S. R. Maju mdar, Oil Hydraulic Systems, Tata McGraw Hill, 1st Edit ion, 2013.
2. S. R. Maju mdar, Pneu matic Systems, Princip les & maintaianance, Tata McGraw Hill, 1 st Edit ion, 2013.
Reference B ooks:
1. Andrew Parr, Hydraulic & Pneu matic, Butterworth-Heinemann Ltd, 2nd Edit ion, 2013.
2. Antony Esponssito, Flu id Power with applications, Prentice Hall, 5 th Edition, 2015.
Web References:
1. http://nptel.ac.in/courses/112105046
2. http://www.nptel.ac.in/courses/112106175/Module%201/ Lecture%201.pdf
3. http://hydraulicspneumatics.com/fluid-power-basics
E-Text Books:
1.https://www.google.co.in/?gfe_rd=cr&ei=weV5V8HrNKLR8AeNgr7g Bw&gws_rd=ssl#q=hydraulic+and+pne
umatics+andrew+parr+pdf
2. https://books.google.co.in/books/about/Oil_ Hydraulic_Systems.html? id=NBMtphgTmxg C&redir_esc=y
3. http://www.faa.gov/regulations_policies/handbooks_manuals/aircraft/amt_airframe_handbook/media/ama_ch1
2.pdf
28
COMPUTER AIDED MANUFACTURING
II Semester: CAD/CAM
OBJECTIVES:
The course should enable the students to:
I. Applying CNC programming for manufacturing.
II. Development of automatic programming techniques.
III. Applying the computer aided concepts in computer aided process planning.
Communication channels and major variables in the DAPP based post processor, the creation of a DAPP
based post processor.
29
Text Books:
1. Yoram Koren,Computer Control of Manufacturing System, Tata Mcgraw Hill, 1st Edition, 1983.
2. K. Lalit Narayan, K. Mallikarjuna Rao, Computer Aided Manufacturing, 1st Edition, 2008.
Reference Books:
1. Mikell. P. Grover, Emory W. Zimmer, CAD/CAM, PHI, 1st Edition, 2010.
Web References:
1. http://nptel.ac.in/courses/112105046
2.http://nptel.ac.in/courses/Webcoursecontents/IITDelhi/Computer%20Aided%20Design%20&%20Ma
nufacturingI/index.ht
mhttp://www.nptel.ac.in/courses/112106175/Module%201/Lecture%201.pdf
E-Text Books:
1.https://www.google.co.in/?gfe_rd=cr&ei=weV5V8HrNKLR8AeNgr7gBw&gws_rd=ssl#q=hydraulic
+and+pneumatics+andrew+parr+pdf
2.https://books.google.co.in/books/about/Oil_Hydraulic_Systems.html?id=NBMtphgTmxgC&redir_es
c=y
3.http://www.faa.gov/regulations_policies/handbooks_manuals/aircraft/amt_airframe_handbook/media
/ama_ch12.pdf
30
FLEXIBLE MANUFACTURING SYSTEMS
II Semester: CAD/CAM
OBJECTIVES:
The course should enable the students to:
I. Understanding of modern trends in design and manufacturing using CAD/CAM.
II. Apply performance analysis techniques.
III.Understand preventive maintenance procedures in manufacturing.
Continuous and discrete mathematical modeling methods -discrete event, monte carlo method; Basic
concepts of Markov chains and processes; The M/M/1 and M/M/m queue; Models of manufacturing
systems including transfer lines and flexible manufacturing systems, introduction to Petri nets.
UNIT-IV PERFORMANCE ANALYSIS Classes: 09
Performance Analysis: Transient analysis of manufacturing systems, analysis.
Text Books:
1. N. K. Jha, Hand Book of Flexible Manufacturing Systems, Academic Press, 1st Edition, 2013.
2. Talichi Ohno, Production System beyond Large Scale Production, Toyota Productivity Press India
Pvt. Ltd,
1st Edition, 2010.
3. H K Shivanand, Flexible Manufacturing Systems, New Age International, 1st Edition, 2006.
31
Reference Books:
1. Farid Amirouche, Principles of Computer-Aided Design and Manufacturing, 2nd Edition, 2004.
2. P. Radha Krishnan, CAD/ CAM/ CIM, New Age International, 4th Edition, 2016.
Web References:
1. http://www.ignou.ac.in/upload/UNIT6-55.pdf
2. http://www.journals.elsevier.com/computer-aided-design
3. https://www.elsevier.com/books/surface-modeling-for-cad-cam/choi/978-0-444-88482-4
E-Text Books:
1. http://engineeringstudymaterial.net/ebook/flexible-manufacturing-system/
2. http://www.sciencedirect.com/science/book/9780123853103
32
COMPUTER AIDED MANUFACTURING LABORATORY
II Semester: CAD/CAM
Course Code Category Hours / Week Credits Maximum Marks
L T P C CIA SEE Total
BCC102 Core - - 3 2 30 70 100
Contact Classes: Nil Tutorial Classes: Nil Practical Classes: 36 Total Classes: 36
OBJECTIVES:
The course should enable the students to:
I. Create the part model using CAM software.
II. Generate computer numerically part program for computer numerically control turning and milling
operation.
III. Demonstrate the tool path for turning operation using CAM software.
LIST OF EXPERIMENTS
Week-1 INTRODUCTION TO COMPUTER AIDED MACHINING
Tool planning and selection of sequences of operation, tool setting on machine-practice.
Week-2 PART PROGRAM
Practice in part programming and operation of CNC turning machines, sub routines and use of cycles.\
Week-3 PART PROGRAM
Practice in part program and operation of a machine center, joining and selection of sequence of
operation, tool setting on machine.
Week-4 NUMERICAL CONTROL PROGRAMMING
Generate APT based NC programming and tool simulation for drilling operation.
Week-5 NUMERICAL CONTROL PROGRAMMING
Practice in APT based NC programming and tool simulation for facing operation.
Week-6 NUMERICAL CONTROL PROGRAMMING
Generate of NC code generation and tool path simulation for profile milling operation using CAM
software.
Week-7 NUMERICAL CONTROL PROGRAMMING
Develop NC code and tool path simulation for thread operation using CAM software.
Week-8 ROBOTICS SIMULATION
Practice of robotic languages, 3-D Robot Simulation for operation of pick-place robot.
Reference Books:
1. Farid Amirouche, Principles of Computer-Aided Design and Manufacturing, Pearson, 2nd Edition,
2004.
2. P. Radha Krishnan, CAD/ CAM/ CIM, New Age International, 4th Edition, 2016.
3. Warren. S. Seames, Computer Numerical Control Concepts and Programming, Delmar Cengage
Learning, 4th Edition, 2013.
E-Text Books:
1. http://sbmpme.blogspot.in/2011/01/cad-cam-cim-p-radhakrishnan.html
2. https://www.scribd.com/doc/228624725/cad-cam-text-book-by-P-N-RAO
33
PRECISION ENGINEERING
Group I: CAD/CAM
Course Code Category Hours / Week Credits Maximum Marks
L T P C CIA SEE Total
BCC201 Elective
3 - - 3 30 70 100
Contact Classes: 45 Tutorials Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understanding the basics of tolerances.
II. Applying the tolerance analysis and tolerance charting technique for a process.
III. Understanding the basics fundamentals of nanotechnology.
CONCEPT OF ACCURACYAND TOLERANCE ZONE
UNIT-I Classes: 09
CONVERSION
Concepts of accuracy: Introduction, concept of accuracy of machine tools,spindle and displacement
accuracies, accuracy of numerical control systems, errors due to numerical interpolation displacement
measurement system and velocity lags; geometric dimensioning and tolerancing: To lerance zone
conversions, surfaces, features, features of size, datum features, datum Oddly configured and curved
surfaces as datum features, equalizing datums datum feature of representation; form controls, orientation
controls logical approach to tolerancing.
34
Text Books:
1. R. L. Murthy, Precision Engineering in Manufacturing, New Age International limited, 1st Edition,
1996.
2. James D. Meadows, Geometric Dimensioning and Tolerancing, Marcel Dekker, 1 st Edition, 1995.
3. Norio Taniguchi, Nano Technology, Oxford University Press, 1st Edition, 1996.
4. Matousek, Engineering DesignA systematic Approach,Blackie & Son Ltd., London.
5. V. C. Venkatesh, S.Izman, Precision Engineering, Tata McGraw Hill,
Reference Books:
1. Preumont, A., Vibration Control of Active Structures, Kluwer Academic Publishers, 2002.
2. F. Y. Cheng, H. Jiang, K. Lou, Smart Structures: Innovative Systems for Seismic Response
Control, CRC Press, 2008
Web References:
1.http://nptel.ac.in/courses/112104173/
2.http://ttp.net/978-3-908451-70-9.html
3.http://iopscience.iop.org/journal/0964726
E-Text Books:
1. http://www.me.umn.edu/~wkdurfee/projects/ccefp/fp-chapter/fluid-pwr.pdf
2. http://hydraulicspneumatics.com/ebooks/fluid-power-ebook-fluid-power-basics
35
DESIGN FOR MANUFACTURING AND ASSEMBLY
Group I: CAD/CAM
Course Code Category Hours / Week Credits Maximum Marks
L T P C CIA SEE Total
BCC202 Elective
3 - - 3 30 70 100
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understanding of basic design rules for manufacturing and material selection.
II. Applying the production processes for ease of manufacturing..
III. Apply the concepts of design for manufacturing and assembly for product manufacturing.
UNIT-I INTRODUCTION TO DESIGN Classes: 09
Introduction: Design philosophy steps in design process, general design rules for manufacturability, basic
principles of design Ling for economical production, creativity in design; Materials selection of materials
for design developments in material technology, criteria for material selection, material selection
interrelationship with process selection process selection charts.
UNIT-II MACHINING PROCESS Classes: 09
Machining process: Overview of various machining processes, general design rules for machining,
dimensional tolerance and surface roughness, design for machining, ease of redesigning of components
for machining ease with suitable examples. General design recommendations for machined parts; Metal
casting: Appraisal of various casting processes, selection of casting process, general design considerations
for casting, casting tolerances, use of solidification simulation in casting design, product design rules for
sand casting.
UNIT-III METAL JOINING Classes: 09
Metal joining: Appraisal of various welding processes, factors in design of weldments, general design
guidelines, pre and post treatment of welds, effects of thermal stresses in weld joints, design of brazed
joints; Forging, design factors for forging, closed dies forging design, parting lines of die drop forging die
design general design recommendations.
Extrusion and sheet metal work: Design guidelines for extruded sections, design principles for punching,
blanking, bending, deep drawing, Keeler Goodman forming line diagram, component design for blanking.
UNIT-IV ASSEMBLY ADVANTAGES Classes: 09
Assembly advantages: Development of the assemble process, choice of assemble method assemble
advantages social effects of automation, automatic assembly transfer systems: Continuous transfer,
intermittent transfer, indexing mechanisms, and operator, paced free, transfer machine
UNIT-V DESIGN OF MANUAL ASSEMBLY Classes: 09
Design of manual assembly: Design for assembly fits in the design process, general design guidelines for
manual assembly, development of the systematic DFA methodology, assembly efficiency, classification
system for manual handling, classification system for manual insertion and fastening, effect of part
symmetry on handling time, effect of part thickness and size on handling time, effect of weight on
handling time, parts requiring two hands for manipulation, effects of combinations of fa ctors, effect of
symmetry effect of chamfer design on insertion operations, estimation of insertion time.
36
Text Books:
1. GeoffreyBoothroyd, Assembly Automation and Product Design, CRC Press, 2nd Edition, 2013.
2. George E. Deiter, Engineering Design - Material & Processing Approach, Tata McGraw Hill,
2nd Edition, 2000.
3. Geoffrey Boothroyd, Hand Book of Product Design, Marcel and Dekken, 1st Edition, 1990.
Reference Books:
1. A Delbainbre, Computer Aided Assembly1992.
2. Geoffrey Boothroyd, Peter Dewhurst, Winston. A. Knight, Product Design for Manufacturing
and Assembly,CRC Press, 3rd Edition, 2013.
Web References:
1. http://nptel.ac.in/courses/107103012/
2. http://me.gatech.edu/files/capstone/L071ME4182DFA
E-Text Books:
1.https://books.google.co.in/books/about/Assembly_Automation_and_Product_Design.html?id=XF
tgaNFzMHQC
2.https://books.google.co.in/books/about/Product_Design_for_Manufacture_and_Assem.html?id=q
YGgjwEACAAJ
37
AUTOMATION IN MANUFACTURING
Group I: CAD/CAM
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understand of modern trends in automation and manufacturing
II. Application of material handling systems and storage systems.
III. Design of automated assembly lines with quality control.
Text Books:
1. Mikell. P Groover, Automation, Production system and computer integrated manufacturing, PHI, 3 rd
38
Edition, 2012.
2. MikeJ P. Groover, Automation, Production Systems and CIM, PHI, 1st Edition, 2001.
3. P. Radha Krishnan, S. Subrahamanyan, CAD/CAM/CIM, New Age International, 1st Edition, 2005.
Reference Books:
1. Sadhu Singh, Svstem Approach to Computer Integrated Design and Manufacturing, John wiley, 1 st
Edition, 1996.
2.Tien-Chien Chang, Richard A. Wysk ,Hsu-Pin Wang, Computer Aided Manufacturing, Pearson, 1st
Edition, 2009.
3. R Thomas Wright and Michael Berkeihiser, Good Heart, Manufacturing and Automation Technology,
Willcox Publishers, 1st Edition, 2012.
Web References:
1. https://www3.nd.edu/~manufact/MPEM_pdf_files/Ch14.pdf
2. http://www.journals.elsevier.com/journal-of-manufacturing-systems
E-Text Books:
1.http://www.automationmag.com/education/news/4721
2 http://www.e-booksdirectory.com/details.php?ebook=1120
39
INDUSTRIAL ROBOTICS
Group I: CAD/CAM
Course Code Category Hours / Week Credits Maximum Marks
L T P C CIA SEE Total
BCC204 Elective 3 - - 3 30 70 100
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understand of basic automation and robotic in transfer lines.
II. Design of robot with kinematic, dynamic and path control.
III. Applying of robot programming using robot languages.
IV. Design of robot cell and control in computer aided transfer lines.
40
Text Books:
1. Mikell P. Groover, Industrial Robotics, Tata McGraw Hill, 2nd Edition, 2012.
2. John. J Craig, Introduction to Robotic Mechanics and Control, Prentice Hall, 3 rd Edition, 2004.
3. H.Asada, J. J. E. Slotine, Robot Analysis and Intelligence, Wiley, 1st Edition, 2013.
Reference Books:
1. King-Sun Fu, C. S. George Lee, Robotics, Tata McGraw Hill, 1st Edition, 2013.
2. R. K. Mittal, I. J. Nagrath, Robotics and Control, Tata McGraw Hill, 1st Edition, 2013.
Web References:
1. http://nptel.ac.in/courses/112101099/
2. http://www.journals.elsevier.com/robotics-and-computer-integrated-manufacturing
E-Text Books:
1. https://books.google.co.in/books/about/Industrial_Robotics.html?id=dr9IAI7wucUC
2. https://books.google.co.in/books/about/Robotics_Control_Sensing_Vis.html?id=_oYYRzSohJgC
3.https://books.google.co.in/books/about/Robot_Analysis_and_Control.html?id=Zz9SAAAAMAAJ&r
edir_esc=y
41
SPECIAL MANUFACTURING PROCESSES
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understanding the basic surface treatment coating in manufacturing.
II. Applying the advanced aspects in processing of ceramics.
III. Understanding of modern trends in manufacturing fields.
Text Books:
1. I Kalpakijian, Manufacturing Engineering and Technology, Adisson Wesley, 1995.
2. R. A. Lindburg, Process and Materials of Manufacturing,PHI, 1st Edition, 1990.
3. Rao. R. Thummala, Eugene, J. Rymaszewski, Van Nostrand Renihold, Microelectronic packaging
handbook, 1st Edition, 2013.
4. Tai-Run Hsu, MEMS & Micro Systems Design and manufacture, Tata McGraw Hill, 1st Edition,
2002.
42
Reference Books:
1. Rao. R. Thummala, Eugene, J. Rymaszewski, Van Nostrand Renihold, Microelectronic packaging
handbook, 1st Edition, 2013.
2. Tai-Run Hsu, MEMS & Micro Systems Design and manufacture, Tata McGraw Hill, 1 st Edition,
2002
Web References:
1.https://www.google.co.in/#q=design+of+mems+and+microsystems+npte l
2. http://www.thelibraryofmanufacturing.com
E-Text Book:
1.http://royalmechanicalbuzz.blogspot.in/2015/04/manufacturing
43
ADVANCED MECHANICS OF SOLIDS
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understand the theory of elasticity including stress, strain, displacement and Hookes law and strain
energy relationships.
II. Understand the shear force and bending moment diagrams of symmetrical beams.
III. Distinguish bending and shear stresses developed in beams of various sections.
IV. Compare stresses in a shaft under torsion and in thin cylindrical members.
UNIT-I SHEAR CENTRE Classes: 09
Bending axis and shear center, shear center for axi-symmetric and unsymmetrical sections;
Unsymmetrical bending: Bending stresses in beams subjected to nonsymmetrical bending, deflection of
straight beams due to nonsymmetrical bending.
44
1. Arthur P. Boresi , Richard, J. Schmidt, Advanced Mechanics of materials wiley international, 6th
Edition, 2003.
2. J. P. Den Hortog, Advanced strength of materials, Dover Publications, 1st Edition, 2012.
3. Timoshenko, Theory of Plates, Tata McGraw Hill, 1st Edition, 2013.
Reference Books:
1. Stephen P. Timoshenko, S. Woinowsky Kriger, Theory of Plates and Shells, Tata McGraw
Hill, 2nd Edition, 2013.
2. James. O. Seely, Smith, B. Fred, Advanced Mechanics of materials, John Willey, 1 st Edition 1967.
Web References:
1.http://nptel.ac.in/courses/105106049/pdf-assignments/main.pdf
2.http://www.nptel.ac.in/syllabus/105101003/
3.http://numgeom.ams.sunysb.edu/shells/ThinPlatesAndShellsTheory
E-Text Books:
1.https://books.google.co.in/books/about/Advanced_mechanics_of_materials.html
2.http://155.207.34.6/files/Timoshenko.pdf
3. https://books.google.co.in/books/about/Strength_of_Materials.html?id=S5A-sZgcYM0C
45
DESIGN OPTIMIZATION
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understanding the basic concepts techniques and applications of design optimization.
II. Understanding practical use of optimization.
III. Applying problem formulation techniques..
UNIT-I INTRODUCTION TO DESIGN OPTIMIZATION Classes: 09
General characteristics of mechanical elements, adequate and optimum design, principles of optimization,
formulation of objective function, design constraints, classification of optimization problems, single and
multivariable optimization techniques.
UNIT-II OPTIMUM DESIGN PROBLEM FORMULATION Classes: 09
Technique of unconstrained minimization, golden section, random, pattern and gradient search methods,
interpolation methods, equality and inequality constraints.
Text Books:
1 C.Johnson Ray, Optimum Design of Mechanical elements, Wiley, John & Sons, 1st Edition, 2013.
2. Goldberg D. E. Addison, Genetic Algorithms in search Optimization and Machine, Wesley, 13 th
Edition, 2013.
Reference Books:
1. Kalyanamoy Deb, Optimization for Engineering Design Algorithms and Examples, Prentice Hal,
2nd Edition, 2013.
2. Jasbir S. Arora, Introduction to Optimum Design, Academic Press, 3rd Edition, 2016.
46
Web References:
1. http://nptel.ac.in/courses/106104025/31
2.http://nptel.ac.in/courses/Webcoursecontents/IIScBANG/OPTIMIZATION%20METHODS/pdf/Mod
ule_1/M1L2_LN.pdf
E-Text Books:
1.https://books.google.co.in/books?id=_edSAAAAMAAJ&source=gbs_navlinks_s&redir_esc=y
2.https://books.google.co.in/books/about/Optimization_for_Engineering_Design.html?id=JypoXt5hHrk
C
47
COMPUTER AIDED PROCESS PLANNING
OBJECTIVES:
The course should enable the students to:
I. Understanding the basic concepts of computer aided process planning.
II. Applying the computer aided processing planning in the automation.
III. Understanding the fundamental theories and technologies in computer aided Process planning.
Text Books:
1. Mikell P. Groover Automation Production systems and Computer Integrated Manufacturing System,
3rd Edition, 2013.
48
2. Sadhu Singh, Computer Design and Manufacturing, S.K. Kataria & Sons, 1st Edition, 2013.
Reference Books:
1. Chang, T. C, Wysk, R. A, An Introduction to Automated Process Planning, Prentice, 1st Edition,
1985.
2. Gallagher, C. C, Knight, W. A., Group Technology: Production Method in Manufacturing, Ellis
Horewood, 1st Edition, 1986.
3. Nilsson, N. J., Principles of Artificial Intelligence, Springer, 1st Edition, 1982.
4. Cornelius, L.T, Computer Aided and Integrated Manufacturing Systems: Manufacturing Processes
World scientific, 1st Edition, 2003.
Web References:
1.http://nptel.ac.in/courses/Webcoursecontents/IITdelhi/ComputerAidedDesign20ManufacturingII/Mo
dule/p3.html
2. http://www.ignou.ac.in/upload/CRC.pdf
E-Text Books:
1.http:// elsevierComputer-Aided-Process-Planning/H_P_-Wang/isbn-9780444886316/
2.http://link.springer.com/chapter/10.1007%2F978-94-011-1250-5_15
49
ADVANCED AUTOMATIC CONTROL
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understanding the advanced concepts of state space approach in control system.
II. Applying the stability, controllability and observability issues and synthesis of industrial control
systems.
50
Text Books:
1. Katsuhiko Ogata, Modern Control Engineering, Prentice Hall, 1st Edition, 2002.
2. F. H. Raven, Automatic control Theory, Tata McGraw Hill, 1st Edition, 1995.
3. B. C. Kuo, Automatic Control System, Prentice Hall, 5th Edition, 1995.
4. C. T. Chen, Linear System Theory & Design, Oxford University Press, 3rd Edition, 1999.
Reference Books:
1. H. L. Harrison, J. G. Bollinger, Automatic Controls, International Text Book Company, 1970.
2. J. S. Bay, Fundamentals of Linear State Space Systems, Tata McGraw 1st Edition, 1999.
3. S. N. Norman, Control Systems Engineering, Wiley 1st Edition, 2003.
Web References:
1.https://www.google.co.in/?gfe_rd=cr&ei=HeWGV4yuM6aM8QfPxYPIBQ&gws_rd=ssl#q=advance
d+automatic+control
2. http://nptel.ac.in/syllabus/108103007/
E-Text Books:
1.https://books.google.co.in/books?id=A93AAAQBAJ&pg=PA430&lpg=PA430&dq=H.+L.+Harrison,
+J.+G.+Bollinger,+Automatic+Controls
2. https://books.google.co.in/books/about/Modern_Control_Engineering.html?id=Wu5GpNAelzkC
51
DESIGN FOR MANUFACTURING OF MEMS AND MICRO SYSTEMS
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understanding of modern trends in design and manufacturing using CAD/CAM.
II. Applying advanced aspects of enabling computer aided technologies used in design.
III. Enumerate fundamental theories and technologies in computer aided manufacturing.
OVERVIEW AND WORKING PRINCIPLES OF MEMS AND
UNIT-I Classes: 09
MICROSYSTEMS
Overview and working principles of mems and microsystems: MEMS and microsystems, evolution of
micro fabrication, microsystems and microelectronics, microsystems and miniaturization, applications of
MEMS in industries, micro sensors, micro actuation, MEMS with micro actuators micro accelerometers,
micro fluidies.
ENGINEERING SCIENCE FOR MICROSYSTEMS DESIGN AND
UNIT-II Classes: 09
FABRICATION
Engineering science for microsystems design and fabrication: Atomic structure of matter, ions and
ionization, molecular theory of mater and intermolecular force, doping of semiconductors, diffusion
Process, plasma physics, electrochemistry, quantum physics.
ENGINEERING SCIENCE FOR MICROSYSTEMS DESIGN AND
UNIT-III Classes: 09
FABRICATION
Engineering mechanics for microsystems design: Static Bending of thin Plates, mechanical vibration.
Thermo mechanics fracture mechanics, thin-film mechanics, overview of finite element stress analysis
UNIT-IV THERMO FLUID ENGINEERING AND MICROSYSTEMS DESIGN Classes: 09
Thermo fluid engineering and microsystems design: Overview of basics of fluid mechanics in macro and
meso scales, basic equations in continuum fluid dynamics, laminar fluid flow in circular conduits,
computational fluid dynamics, incompressible fluid flow in micro conduits, fluid flow in sub micrometer
and nano scale, overview of heat conduction in solids, heat conduction in multilayered thin films and in
solids in sub micrometer scale, design considerations, process design mechanical design, mechanical
design using finite element method, design of a silicon die for a micro pressure sensor.
52
Text Books:
1. Tai-Ran Hsu, MEMs & Microsystems: Design & Manufacture, Tata McGraw Hill, 1st Edition,
2002.
2. M. Maluf, An Introduction to Microelectromechanical Systems Engineering, Artech House,1 st
Edition, 2000
3. Trimmer, W.S.N, Micro robots and Micromechanical Systems Sensors & Actuators, 19th Edition,
1989.
Reference Books:
1. Madou, M, Fundamentals of Microfabrication, CRC Press, 1st Edition, 1997.
2. Hsu, T.R, The Finite Element Method in Thermomechanics, Alien & Unwin, London, 1st Edition,
1986.
Web References:
1. http://nptel.ac.in/courses/117105082/
2. https://www.mems-exchange.org/MEMS/what-is.html
E-Text Books:
1.http://ebooks.cawok.pro/Artech.House.Publishers.An.Introduction.to.Microelectromechanical.System
s.Engineering.2nd.edition.eBook-LiB.pdf
2. http://www.springer.com/la/book/9783540850557?token=prtst0416p
53
INTELLEGENT MANUFACTURING SYSTEM
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the student to:
I. Understanding of basic computer integrated manufacturing.
II. Applying the knowledge based system in manufacturing.
III. Applying of machine learning and group technology in manufacturing system.
54
Text Books:
1. Andrew Kusiak, Intelligent Manufacturing Systems, Prentice Hall, 1st Edition, 1990.
2. Yagna Narayana, Artificial Neural Networks, PHI, 1st Edition, 2006.
3. M. P. Groover, Automation, Production Systems and CIM, PHI, 2nd Edition, 2007.
4. Simon Hhaykin, Neural networks: A comprehensive foundation, PHI, 1st Edition, 1994
Reference Books:
1. B.yegnanarayana, Artificial neural networks, PHI, 1st Edition, 2004.
2. Li Min Fu, Neural networks in Computer intelligence, TMH, 1st Edition, 2003.
3. David M. Skapura, James A. Freeman, Neural networks, Pearson education, 1st Edition, 2004.
4. Jacek M. Zurada, Introduction to Artificial Neural Systems, JAICO Publishing House 1 st Edition,
2013.
Web References:
1, http://nptel.ac.in/courses/117105084/
2. http://prolog.univie.ac.at/teaching/LVAs/Layout_und_Design/SS09/Skript%20insel.pdf
3. http://nptel.ac.in/courses/106106139/
4. http://nptel.ac.in/courses/106106126/
E-Text Books:
1.https://books.google.co.in/books/about/Intelligent_manufacturing_systems.html?id=5RVUAAAAM
AAJ&hl=en
2.https://books.google.co.in/books/about/ARTIFICIAL_NEURAL_NETWORKS.html?id=RTtvUVU_
xL4C
3.https://donvalebooks.com/pdf-automation-production-systems-and-cim-groover-second-edition.html
55
EXPERT SYSTEMS DESIGN
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understanding concepts, techniques and tools for developing expert systems for various engineering systems.
II. Applying the pattern matching techniques.
III. Designing of expert system design.
Reference Books:
1. P. Jackson, Introduction to Expert Systems, Addison Wesley, 3 rd Edition, 1998.
2. R. Akerkar, P. Sajja, Knowledge-Based Systems, Jones & Bartlett Publishers, 1st Edition, 2009.
Web References:
1.http://nptel.ac.in/courses/Webcoursecontents/IIT%20Kharagpur/Artificial%20intelligence/pdf/Lesson%2018.pdf
56
2.http://nptel.ac.in/courses/106105077/25
E-Text Books:
1. http://www.worldcat.org/title/expert-systems-design-and-development/oclc/622154797
2. https://www.cs.ru.nl/~peterl/proe.pdf
57
STRESS ANALYSIS AND VIBRATION
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understanding of modern trends in design and manufacturing using CAD/CAM.
II. Applying vibration theory for engineering.
58
COMPUTER AIDED ANALYSIS OF MECHANICAL SYSTEM
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understanding the computer based design tools for analysis.
II. Analysis of kinematics and dynamics of mechanical system.
III. Understanding the concept of expert system and their application in CAD.
INTRODUCTION TO COMPUTER AIDED ANALYSIS OF MECHANICAL
UNIT-I Classes: 09
SYSTEM
Introduction: Introduction to mechanical systems analysis, kinematic modeling: Modeling the kinematics of
mechanical systems; Vector loop methods, vector chain methods.
Text Books:
1. Norton R., Design of Machinery, McGraw Hill, 1992.
2. Palm W. J., Introduction to MATLAB 6 for Engineers, Tata McGraw Hill, 1st Edition, 2000.
3. Nikravesh, P. E., Computer-Aided Analysis of Mechanical Systems, Prentice Hall, 1988.
Reference Books:
1. Haug, E. J., Computer Aided Analysis and Optimization of Mechanical System Dynamics, Springer-Verlag.
1984.
2. Mukherjee, A., Karmaker, R. and Samantaray, A.K., Bond Graph in Modeling, Simulation and Fault
59
identification, I & K International 1st Edition, 2007.
Web References:
1.http://nptel.ac.in/courses/106105077/
2.http://nptel.ac.in/courses/Webcourse-contents/IITKharagpur/Artificialintelligence/New_index1.html
E-Text Books:
1.http://www.ulb.ac.be/scmero/documents/Teaching/Mecah405/MecaH405_part1.pdf
2.http://link.springer.com/book/10.1007%2F978-3-642-52465-3
60
SIMULATION MODELING OF MANUFACTURING
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understand concepts, techniques and tools for modeling and simulation of thermal systems.
II. Apply the fluid mechanics and heat transfer with discrete continuous systems.
INTRODUCTION TO MODELING AND MATHEMATICAL
UNIT-I Classes: 09
PRELIMINARIES
Introduction to Modeling: Concept of system, continuous and discrete systems, types of models,
steps in simulation study; Mathematical preliminaries: Review of vector calculus, Cartesian tensors,
vector spaces and linear transformations; Interpolation and extrapolation; Numerical differentiation
and integration.
UNIT-II DISCRETE AND CONTINUOUS SYSTEMS Classes: 09
Discrete and Continuous systems: Continuous and discrete systems from fluid mechanics and heat
transfer; Characteristics of discrete systems, eigenvalue problems; Characteristics of continuous
systems based on differential equa tions; Inverse problems;
UNIT-III MATHEMATICAL MODELING OF THERMAL PROCESSES Classes: 09
Mathematical modeling of thermal processes: Conservation laws, mass, momentum and energy
balance; Classification of governing equations, boundary conditions.
Dimensional analysis, model development for various thermal processes and system; Dynamics of
thermo-fluid systems.
UNIT-IV SIMULATION OF THERMAL SYSTEMS Classes: 09
Simulation of Thermal Systems: Numerical methods for solution of partial and ordinary differe ntial
equations; Numerical solution of linear and nonlinear algebraic equations; Numerical simulation of
steady state and dynamic systems.
61
Reference Books:
1. Jaluria, Y. Computer Methods for Engineering with MATLAB Applications, 2nd Edition, CRC
Press. 2011.
2. W. H., Teukolsky, S. A., Vetterling, W. T., Flannery, B. P., Numerical Recipes: The Art of Scientific
Computing, Third Edition, Cambridge UniversityPress, 2007.
Web References:
1. https://www.youtube.com/watch?v=-gYcZt5iKPA
2. https://www.google.co.in/#q=simulation+modelling+of+manufacturing
E-Text Book:
1. http://www.mescenter.ru/images/abook_file/ManufacturingSystems.pdf
62
DATA COMMUNICATION IN CAD/CAM
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the stude nts to:
I. Understanding the basic concepts of computer and microprocessors.
II. Identify the function of operating system.
III. Applying the data communication and networking in transmission of data.
Text Books:
1. Morris Mano. M., "Computer System Architecture", Prentice Hall of India, 1st Edition, 1996.
2. Gaonkar R.S., "Microprocessor Architecture, Programming and Applications of 8085", Penram
International, 1997.
3. Peterson J.L., Galvin P. and Silberschaz, A., "Operating Systems Concepts", Addison Wesley, 1 st
63
Edition, 1997.
Reference Books:
1. Alfred V. Aho, Ravi Setjhi, Jeffrey D Ullman, "Compilers Principles Techniques and Tools", Addison
Wesley,
1986.
2. William Stallings, "Data of Computer Communications" Prentice Hall of India, 1997.
3. Andrew S. Tanenbanum "Computer Networks", Prentice Hall of India, 3 rd Edition, 1996.
4. Christian Crumlish, "The ABC's of the Internet", BPB Publication, 1996.
Web References:
1. http://nptel.ac.in/downloads/106108100/
2. http://nptel.ac.in/courses/106105082/
3. http://nptel.ac.in/courses/106105080/2
4. http://nptel.ac.in/courses/ microcontrollers/micro/ui/Course_home1_1.html
E-Text Books:
1. http://www.faadooengineers.com/threads/3371-Data-communication-and-networking-Ebook-PDF-
DCN-Ebook
2.https://www.google.co.in/?gfe_rd=cr&ei=Dq6SV_G6KNLk8Ae624HgCw&gws_rd=ssl#q=data+com
munication+ebook
3. https://books.google.co.in/books?id=zrWQ4Bk-XHMC&redir_esc=y
64
DISASTER MANAGEMENT
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The student should enable the students to:
I. Exposure to disasters, their significance and types.
II. Understand the relationship between vulnerability, disasters, disaster prevention and risk reduction.
III. Explore on Disaster R is k Reduction (DRR) approaches.
IV. Enhance awareness of institutional processes in the country.
V. Develop rudimentary a b ilit y to respond to their surroundings w it h potential disaster response in
areas where they live , with due sensitivity.
Concepts and definitions of Disaster, Hazard, Vulnerability, Resilience, Risks. Impact of drought, review of
past disasters and drought in India, its classification and characteristics. Classification of drought, ca us es ,
Impacts (including social, economic. political, environmental, health, psychosocial, etc.).
DISASTER, DIFFERENTIAL IMPACTS, CYCLONES A ND
UNI T-II Classes: 09
FLOODS
Classifications, Causes, Impacts including social, economic, political, environmental, health, psychosocial
etc. Differential Impacts in terms of caste, class, gender, age, location, disability Global trends in disas ters ,
urban disasters, pandemics, complex emergencies, climate change.
Tropical cyclones & Local storms, Destruction by tropical cyclones and local storms, Cumulative
atmospheric hazards/ dis asters, Cold waves, Heat waves, Causes of floods, Rood hazards in India.
Disaster cycle, its analysis, phases, culture of safety, prevention, mitigation and preparedness community based
Disaster ris k r eduction.
Structural, nonstructural sources, roles and responsibilities of community, Panchayati raj Institutions, Urban
local bodies, states, centre and other stake holders.
INTER-RELATIONSHI P BETWEEN DISASTERS AND
UNI T-IV Classes: 09
DEVELOPMENT
Factors affecting vulnerabilities, differential impacts, impact of development projects such as darns,
embankments, changes in Land-use etc. Climate Change Adaptation, Relevance of indigenous knowledge,
appropriate technology and local resources.
Hazard and Vulnerability profile of India Components of Disaster Relief: Water, Food, Sanitation, Shelter,
Health, Waste Management Institutional arrangements (Mitigation, Response and Preparedness, OM Act and
65
Policy, other related policies, plans, programmes and legislation).
Field work and case Studies to understand vulnerabilities and to work on reducing disaster risks and to
build a culture of safety. Projects must be conceived creatively bas ed on the geographic loc ation and
hazard profile of the region where the institute is located.
Text Books:
1. Nick, Disaster Management: A Disaster Manager's Handbook, As ian Development Bank, Manila
Philippines, 1991.
2. Kapur, et al. , Disasters in India: Studies of Grim Reality, Rawat Publishers, Jaipur, 2005.
3. Pelling Mark, The Vulnerability of Cities: Natural Disaster and Social Res ilience, Earthscan
Publishers, London, 2003.
Reference Books:
1. Sharma, V. K. (1999), Disaster Management, National Centre for Disaster Management, IIPE, Delhi,
1999.
2. Anil, K. Gupta a n d Sreeja, S. Nair (2011), Environmental Knowledge for Disaster Risk
Management, NIDM, New Delhi, 2011.
Web References:
1. http://humanityroad.org/
2. http://www.wcpt.org/disaster-management/what-is-disaster-management
3. http://www.ndmindia.nic.in/
4. http://nidm.gov.in/default.asp
5. http://www.unisdr.org/2005/mdgs-drr/national-reports/India-report.pdf
Web References:
1. http://www.ekalavvya.com/disaster-management-in-india-volume-i-free-ebook/
2. http://cbse.nic.in/natural%20hazards%20&%20disaster%20management.pdf
3. http://www.undp.org/content/dam/india/docs/disaster_management_in_india.pdf
4. http://www.digitalbookindex.org/_search/search010emergencydisastera.asp
66
RENEWABLE ENERGY SYSTEMS
OBJECTIVES:
This course should enable the students to:
I. Illustrate the concept of photo voltaic power generation.
II. Discuss the Magneto hydrodynamic (MHD) and wind energy power conversion systems.
III. Explain tidal and wave energy.
IV. Design energy conversion systems with low impact on environment.
V. Understand the technology of fuel cells.
Photo voltaic power generation: spectral distribution of energy in solar radiation, solar cell configurations,
voltage developed by solar cell, photo current and load current, practical solar cell performance, commercial
photo voltaic systems, test specifications for PV systems, applications of super conducting materials in
electrical equipment systems.
Tides and tidal power stations, modes of operation, tidal project examples, turbines and generators for tidal
power generation.
Wave energy conversion: Properties of waves, power content, vertex motion of waves, device applications,
types of ocean thermal energy conversion systems application of OTEC systems examples.
Miscellaneous energy conversion systems: coal gasification and liquefaction, biomass conversion, geothermal
energy, thermo electric energy conversion, principles of EMF generation, co generation and energy storage,
combined cycle co generation, energy storage; Global energy position and environmental effects: energy units,
global energy position.
Fuel cells: Types of fuel cells, H2 O2 Fuel cells, application of fuel cells, batteries, description of batteries,
battery application for large power, environmental effects of energy conversion systems.
67
Text Books:
Reference Books:
1. Mittal K.M, Non-Conventional Energy Systems, Wheeler Publishing Co. Ltd, 1997.
2. Ramesh R, Kurnar K.U, Renewable Energy Technologies, Narosa Publishing House, New Delhi, 1997.
3. John Twidell, Tony Weir Renewable Energy Resources, 2nd edition.
4. Kreith, Kreider, Solar Energy Handbook, McGrawHill
Web References:
1. http://www.nrel.gov/docs/fy13osti/54909.pdf
2. http://www.gisday.com/resources/ebooks/renewable-energy.pdf
3. http://www.geni.org/globalenergy/library/energytrends/currentusage/renewable/Renewable-Energy-
Potential-for-India.pdf
4. http://www.cerien.upc.edu/jornades/jiie2005/ponencies/power%20converters%20and%20control%20of%2
0renewable%20energy%20systems%20paper.pdf
5. https://www.irena.org/DocumentDownloads/Publications/RE_Technologies_Cost_Analysis -
SOLAR_PV.pdf
E-Text Books:
1. http://maxwell.sze.hu/~marcsa/MegujuloEnergiaforrasok/Books/renewable%20energy%20resources.pdf
2. http://lab.fs.uni-
lj.si/kes/erasmus/Renewable%20Energy%20Conversion,%20Transmission,%20and%20Storage.pdf
3. http://www.landartgenerator.org/LAGI-FieldGuideRenewableEnergy-ed1.pdf
68
AUTOMOTIVE DESI GN
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understand and Specify automotive styling and design principles of automotive exteriors.
II. Analyze automotive exterior design trends.
III. Design automotive exteriors using manual and digital renderings.
IV. Create clay models of automotive exterior design.
69
AUTOMOTIVE EXTERIOR DESIGN, PAI NTI NG , SURFACE
UNI T-V Classes: 09
PROTECTION
Design methodology, image boards : lifestyle board, mood board, theme board, design trends, design
movements, application of design principles, product aesthetics, different types of corrosion on
automotive bodies, corrosion protection methods, automotive body painting procedure, paint components
and latest trends in automotive body colors.
Text Books:
1. J.Fenton, Handbook of Automotive Body and System Design, Professional Engineering
Publishing, 1st Edition, 2000.
2. Erik Eckermann, World History of the Automobile, SAE International, 1st Edition, 2002.
Reference Books:
1. Stephen Newbury, Car Design Year Book 1 to 5, Marrell, 1stEdition, London, 2007.
2. Tony Lewin, How to Design Car Like A Pro, Motorbooks International, 1 st Edition, 2003
Web References:
1.www.carbodydesign.com
2. www.style4cars.com
3..www.cardesignnews.com
E-Text Books:
1. http://www.sciencedirect.com/science/book/9780750656924
2. http://books.sae.org/r-312/
70
EMBEDDED C
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understand embedded C and use it for programming embedded system.
II. Apply techniques for data transfer between I/O ports and memory.
III. Apply object oriented programming for designing embedded system.
IV. Use timers to generate time delays.
Introduction, what is an embedded system, which processor should you use, which programming language
should you use, which operating system should you use, how do you develop embedded software, conclusions;
Introduction, whats in a name, the external interface of the standard 8051, reset requirements, clock frequency
and performance, memory issues, I/O pins, timers, interrupts, serial interface, power consumption,
conclusions.
Introduction, basic techniques for reading from port pins; Example: Reading and writing bytes, example:
Reading and writing bits (simple version), Example: Reading and writing bits (generic version), The need for
pull-up resistors, Dealing with switch bounce, Example: Reading switch inputs (basic code), example:
counting goats, conclusions.
Introduction, object oriented programming with C, the project header (MAIN.H), the port header (PORT.H);
Example: Restructuring the Hello Embedded World example, Example: Restructuring the goat-counting
example, further examples and conclusions.
Introduction, The software architecture, key software components used in this example, running the program,
the software, conclusions.
71
Text Books:
Reference Books:
nd
1. Nigel Gardner, The Microchip PIC in CCS C, Ccs Inc, 2 Revision Edition, 2002.
Web References:
1. http://www.keil.com/forum/5973/
2. http://nptel.ac.in/courses/Webcourse-contents/IIT%20Kharagpur/Embedded%20systems
/New_index1.html
3. http://nptel. iitg.ernet.in/courses/Elec_Engg/IIT%20Delhi/Embedded%20Systems%20(Video).htm
4. http://freevideolectures.com/Course/2999/Embedded-Systems-I/5
E-Text Books:
1. http://teachers.teicm.gr/kalomiros/Mtptx/e-books/eBook%20-%20PIC%20Programming%20with %20C.pdf
2. http://www.ecpe.nu.ac.th/ponpisut/22323006-Embedded-c-Tutorial-8051.pdf
3. http://dsp-book.narod.ru/CPES.pdf
4. http://staff.ustc.edu.cn/~shizhu/WinCE/winCE6%20Fundamentals.pdf
5. http://read.pudn.com/downloads167/ebook/769402/Wrox.Professional.Microsoft.Windows.Embedd
6. ed.CE.6.0.Nov.2008.eBook-DDU.pdf
7. https://syhpullpdf.files.wordpress.com/2015/05/embedded-systems-textbook-pdf.pdf
72
ADVANCED JAVA PROGRAMMI NG AND WEB SERVICES
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to :
I. Understand OOPS Concepts Describe client side technologies.
II. Implement database connections.
III. Develop the skills to design user interfaces for web Applications.
Basic concepts of OOPs: Java History, Java Features, Comparison in Java and C++ ,Java Virtual Machine,
Java Environment, Program, Data types, operators, Control Structure, Classes and Objects, Constructors,
Interfaces, Exception Handling.
XML: document type definition, XML schemas, document object model, presenting XML, using XML
processors: DOM and SAX.
JDBC & ODBC :Java and JDBC , JDBC vs ODBC, JDBC driver model, JDBC driver types, two-tier
architecture for data access ,three-tier architecture for data access , types of driver managers, connecting to an
ODBC data source, JDBC programs
73
Text Books:
1. WILEY Dreamtech Chris Bates, Web Programming, building internet applications , 2nd edition.
2. Patrick Naughton and Herbert Schildt, The complete Reference Java 2 , TMH, 5 th Edition.
3. Hans Bergsten , Java Server Pages, SPD OReilly.
Reference Books:
1. Sebesta, Programming world wide web, Pearson Core,8th Edition 2008.
2. Marty Hall, Larry Brown, Servlets and Javaserver Pages, Volume 1: Core Technologies, Pearson 2 nd
Edition 1998.
Web References:
1. http://engineeringppt.blogspot.in/2010/01/advance-java-web-technology.html
2. http://www.scoopworld.in/2015/02/ajwt-ppt-lab-materials-cse.html
3. http://jntuh.ac.in/new/bulletin_board/WEB_T ECHNOLOGIES.pdf
E-Text Books:
1. http://www.freetechbooks.com/advanced-programming-for-the-java-2-platform-t36.html
2. https://www.mkyong.com/featured/top-5-free-java-ebooks/
3. http://www.e-booksdirectory.com/listing.php?category=226
74
INTRODUCTION TO AEROSPACE ENGI NEERING
OBJECTIVES:
The course should enable the students to:
I. Outline different aspects of flight vehicles and their operational environment.
II. Description of flow behavior of one-dimensional incompressible and compressible flow, two-
dimensional flow and finite wing.
III. Apprise about boundary layer effects, aerodynamic forces on airfoils, wings and high-lift systems.
IV. Analyze airplane performance, stability and control.
Historical perspective of aeronautics and astronautics, anatomy of the airplane, anatomy of a space
vehicle, aerodynamic forces; Parameters affecting aerodynamic forces: Dimensional analysis; Theory and
experiment, wind tunnels; Atmosphere: Properties of U.S. standard atmosphere, definitions of altitude.
Supersonic flow: Shock waves and Mach waves, supersonic wing lift and drag, area rule,
supersonic aircraft, airfoils; Wings: early airfoil development, modern airfoils, supersonic airfoils,
airfoil pitching moments, effects of sweepback on lift, airfoil characteristics, airfoil selection and wing
design; High-lift Devices: Airfoil maximum lift coefficient, leading and trailing edge devices, effect
of sweepback, deep stall, effect of Reynolds number, propulsive lift.
75
AIRPLANE PERFORMANCE, STABILITY AND CONTROL,
UNI T-IV Classes: 09
AEROSPACE PROPULSION
Level flight performance, climb performance, range, endurance, energy-state approach to airplane
performance, takeoff performance, landing performance; Static longitudinal stability; Dynamic longitudinal
stability; Dynamic lateral stability; Control and maneuverability: Turning performance, control systems,
active controls; Aerospace propulsion: Piston engines, gas turbines; Speed limitations of gas turbines:
Ramjets, propellers, overall propuls ion efficiency, rocket engines, rocket motor performance, propulsion-
airframe integration.
Text Books :
nd
1. Richard S. Shevell, Fundamentals of Flight, Pearson Education Publication, 2 Edition, 1988.
th
2. Anderson J. D, Introduction to Flight, McGraw -Hill, 5 Edition, 1989.
st
3. Newman D, Interactive Aerospace Engineering and Design, McGraw -Hill, 1 Edition, 2002.
rd
4. Barnard R.H and Philpot. D.R, Aircraft Flight, Pearson, 3 Edition, 2004.
Reference Books:
1. Introduction to Flight, John D. Anderson, Jr., Tata McGraw -Hill Publishing Company, Fifth Edition,
Fifth Edition, 2007.
2. Kermode, A. C, Flight without Formulae, McGraw Hill, 4th Edition, 1997.
3. Swatton P. J, Flight Planning, Blackwell Publisher, 6 th Edition, 2002.
Web References:
1. https://fas.org/irp/doddir/army/fm3-04-203.pdf
2. http://www.aerospaceengineering.es/book/
3. http://www.ne.nasa.gov/education/
4. http://nptel.ac.in
E-Text Books:
1. http://www.e-booksdirectory.com/
2. http://www.adl.gatech.edu/extrovert/Ebooks/ebook_Intro.pdf
3. http://www.academia.edu/7950378/Introduction_to_Flight_-_Anderson_5th_Ed._
76
GEOSPATIAL TECHNIQUES
OBJECTIVES:
The course should enable the students to:
I. Provide technical skills to use geo-referenced data for the purpose of economic, educational, and social
development.
II. Learn the art of image interpretation and mapping.
III. Learn the applications of geospatial technologies.
Geospatial data, why to study geospatial data, importance of geospatial technology, spatial data infrastructure,
three important geospatial technologies, spatial elements., coordinates and coordinate systems, basic
electromagnetic radiation.
Definition and scope, history of photogrammetry and remote sensing, principle, remote sensing data
acquisition, Remote sensing data analys is methods, advantages and limitations, hardware and software
required. Map Vs mosaic, ground control points. Energy interactions with atmosphere and earth surface
features.
UNI T-III MAPPI NG AND CARTOGRAPHY Classes: 10
What is map and its importance, map scale and types, elements of map and Indexing, map coordinate systems,
visual interpretation of satellite images, and interpretation of terrain evaluation.
Introduction to digital data analys is, cartographic symbolization, classification of symbols, colours in
cartography, scale and purpose of a map, cartographic design, thematic cartography, digital cartography.
Introduction to GIS, definition and terminology, GIS categories, components of GIS, fundamental operations
of GIS, theoretical framework for GIS, GIS data structures, data collection and input overview, processing of
spatial data, data Input or output, vector data model, raster data model, geometric representation of spatial
feature and data structure. Spatial data and modeling, TIN, DTM, overlay, spatial measurement .
Visual image analys is for land use / land cover mapping, land use and land cover in water resources, surface
water mapping and Inventory, geological and soil mapping, agriculture applications for forestry applications,
water resources applications, urban and regional planning, environmental assessment, principles of land form
identification and evaluation: sedimentary, igneous and metamorphic rock terrain.
77
Text Books :
1. John D. Bossler, Manual of Geospatial Science and Technology Taylor & Francis.
2. M. Anji Reddy, Textbook of Remote Sensing and Geographical Information Systems, BS Publications.
Reference Books:
1. C. P. Lo Albert, K.W. Yonng, Concepts and Techniques of GIS, Prentice Hall (India) Publications.
2. Peter A Burragh and Rachael A. Mc Donnell, Principles of Geo- Physical Information Systems, Oxford
Publishers, 2004.
3. M. Anji Reddy, Geo-informatics for Environmental Management BS Publications.
Web References:
1. https://www.aaas.org/content/what-are-geospatial-technologies
2. http://www.istl.org/10-spring/internet2.htmls
E-Text Books:
1. http://www.springer.com/us/book/9781441900494
2. https://www.amazon.com/Introduction-Geospatial-Technologies-Bradley-Shellito/dp/146413345X
3. http://www.springer.com/us/book/9784431555186
4. http://gep.frec.vt.edu/VCCS/materials/2011/Day1/Handouts/1.2-Ch.1_GIS_Intro.pdf
5. http://www.slideshare.net/CuteGirl11/introduction-to-geospatial-technologies-pdf
78
SOLAR PHOTOVOLTAIC ENERGY CONVERSION
OBJECTIVES:
This course should enable the students to:
I. Illustrate the operation of Photo voltaic power generation.
II. Analyze the characteristics of solar photovoltaic power generation.
III. Design energy conversion systems with low impact on environment.
IV. Understand the technology of fuel cells.
Introduction: Highlights, an atomic description of silicon, the effect of light on silicon the potential barr ier, the
function of the barrier, the potential barrier in action the electric current.
Physical aspects of solar cell efficiency: Reflection light with too little or too much energy, recombination of
electron hole pairs, direct recombination indirect recombination, resistance, self shading, performance
degradation at non optimal temperatures, high temperature losses, low temperature losses.
UNI T-III SINGLE CRYSTAL SILICON SOLAR CELLS AND ARRAYS Classes: 09
Single Crystal Silicon Solar cells: New fabrication edge, defined film fed growth (dendritic web growth,
Ribbon to ribbon (rtr) growth innovative cell designs back surface fields (BSF) and other minority carrier
mirrors (MCM). Schottky barrier cells, inversion layer cells, cells for concentrated sun light advances in
component technology highlights, PV building blocks, boosting voltage and amperage design requirements for
connecting components, the physical connection. placing the cells;
Arrays: Array support, module covers, module cooling, hybrid designs, Brayton cycle, electricity production,
the rmo electric generators, intercepting sunlight, arrays with relectors, arrays that follow the sun, controlling
intensity, imaging optics, mirrors,
lenses tracking devices, steering mechanisms, tracking device controls, optimizing the use of the spectrum,
splitting the spectrum, converting the spectrum to a single color.
Solar array constructions: Intercepting sunlight, arrays with relectors, arrays that follow the sun, controlling
intensity, imaging optics, mirrors, lenses; Tracking devices: steering mechanisms, tracking device controls,
optimizing the use of the spectrum, splitting the spectrum, converting the spectrum to a single color.
79
UNI T-V PV SUPPORT EQUIPMENT Classes: 09
PV support equipment: PV vs conventional electricity, storing PV's electricity, batteries, fuel cells, power
conditioning equipment the inverter regulators other devices; system analysis, design procedure, design
constraints, other considerations.
Text Books:
1. CS Solanki, Solar photovoltaics fundamentals, Technologies and Applications, PHI Learning Pvt. Ltd.,
2011.
2. Rai. G.D, Solar energy utilization, Khanna publishes, 1993.
3. Rai,G.D., Non- conventional resources of energy, Khanna publishers, Fourth edition, 2010.
Reference Books:
Web References:
1. http://www.tue.nl/fileadmin/content/faculteiten/tn/PMP/White_papers/Delft2012_-_ALD4PV.pdf
2. http:// www.en.wikipedia.org/wiki/Photovoltaics
3. http://www.desware.net/Sample-Chapters/D06/D10-014.pdf
4. http://www.southampton.ac.uk/~solar/files/Strasbourg.pdf
5. http:// www.science.nasa.gov/science-news/science-at-nasa/2002/solarcells/
E-Text Books:
1. http://www.nrel.gov/docs/legosti/old/1448.pdf
2. http://www.irena.org/DocumentDownloads/Publications/IRENAETSAP%20Tech%20Brief%20E11%20S
olar%20PV.pd
3. http://www.opalrt.com/sites/default/files/technical_papers/SOLAR%20PHOTOVOLTAIC%20ENERGY%
20GENERATION%20AND%20CONVERSION.pdf
80
COMPUTER GRAPHICS
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understanding the basics of Computer Graphics needed for CAD/ CAM applications.
II. Applying the geometrical modeling for computer graphics.
III. Applying data structures in computer graphics.
Text Books:
1. D. F. Rogers, J. A. Adams, Mathematical Elements for Computer Graphics, Tata McGraw Hill.
1989.
2. I. D. Faux, M. J. Pratt, Computational Geometry for Design and Manufacture, Ellis Horwood,
1979.
3. Mortenson, M. E., Geometric Modeling, 3rd Ed., Industrial Press. 2006
81
4. Ibrahim Zeid, CAD/CAM: Theory and Practice, Tata McGraw Hill, 1998.
5. B. K. Choi, B. K., Surface Modeling for CAD/CAM", John Wiley & Sons 1991
Reference Books:
1. C. Pozrikidis, Introduction to Theoretical and Computational Fluid Dynamics, Oxford University
Press, 2nd Edition, 2013.
2.V. Patankar, Hema shava Suhas , Numerical heat transfer and fluid flow, Tata McGraw Hill
Web References:
1. http://nptel.ac.in/courses/106106090/
2. http://nptel.ac.in/courses/112102101/
E-Text Books:
1. http://www.freebookcentre.net/CompuScience/Free-Computer-Graphics-Books-Download.html
2.https://docs.google.com/file/d/0B_YZ665nBRhlYmNiOTU5ZDItMmU2OC00YTVmLThiNmMtMjg
3. Y2E3ZTgwZDYw/edit?hl=en_US&pref=2&pli=1
82
MICROCONTROLLERS FOR EMBEDDED SYSTEM DESIGN
Contact Classes: 45 Tutorial Classes: Nil Practical Classes: Nil Total Classes: 45
OBJECTIVES:
The course should enable the students to:
I. Understand hardware units and devices for design of embedded systems.
II. Use architectures of embedded RISC processors and system on chip processor design of embedded
systems.
III. Analyze interrupt latency, context switching time, for development of device drives for timing devic es.
Overview of embedded systems, processor embedded into a system, embedded hardware units and devices in
system, embedded software, complex system design, design process in embedded system, formalization of
system design, classification of embedded systems.
8051 architecture, input/output ports and circuits, external memory, counters and timers, PIC controllers;
Interfacing processor 8051, PIC, memory interfacing, I/O devices, memory controller and memory arbitration
schemes.
Exceptions and Interrupt handling Schemes, Context and periods for context switching, deadline and interrupt
latency; Device driver using interrupt service routine, serial port device driver and device drivers for internal
programmable timing devices.
Serial communication protocols, Ethernet protocol, SDMA, Channel and IDMA, external bus interface.
Text Books:
83
nd
1. Raj Kamal, Embedded Systems, Architecture Programming and Design, Tata Mc Graw Hill, 2 Edition,
2008.
2. Muhammad Ali Mazidi, Rolin D. Mckinaly, Danny Causy, PIC Microc ontroller and Embedded Systems,
Pearson Education, 1st Edition, 2008.
st
3. Robert Ashpy, Designers Guide to the Cypress PSOC, Elsevier, 1 Edition, 2005.
Reference Books:
1. Jonathan W. Valvano Brookes / Cole, Embedded Microcomputer Systems, Real Time Interfacing,
Thomas Learning, 1st Edition, 1998.
2. Andrew N. Sloss, Dominic Symes, Chris Wright, ARM Systems Developers Guides, Design &
Optimizing System Software, Elsevier, 1 st Edition, 2004.
3. John B. Peatman, Designing with PIC Microcontrollers, PH Inc, 1st Edition, 1998.
Web References:
1. http://nptel.ac.in/syllabus/108102045/
2. http://nptel.ac.in/courses/Webcourse-
contents/IIT,KANPUR/microcontrollers/micro/ui/Course_home1_1.Htm
E-Text Books:
1. http://microcontrollershop.com/default.php?cPath=239
2. http://www.sciencedirect.com/science/book/9780750667555
3. https://books.google.co.in/books/about/Embedded_Systems_Design_with_8051_Microc.html?id=YiTa,
HChn0UC&redir_esc=y
4. https://books.google.co.in/books/about/Microcontroller_And_Embedded_Systems.html?id=4GrXJeC6HFk
C
84
LINUX PROGRAMMI NG
OBJECTIVES:
The course should enable the students to :
I. Understand basic Linux utilities and Shell scripting language (bash) to solve Problems.
II. Explore on implementation of linux utilities using system calls.
III. Develop the skills necessary for systems programming
IV. Illustrate the basic skills required to write inter process communication programs.
Classes: 09
UNI T-I LINUX UTILI TIES
File handling utilities, Security by file permissions, Process utilities, Disk utilities, Networking commands,
Filters, Text processing utilities and Backup utilities; Sed-Scripts, Operation, Addresses, Commands, awk-
Execution, Fields and Records, Scripts, Operation, Patterns, Actions, Associative Arrays, String and
Mathematical functions, System commands in awk, Applications.
Introduction, shell responsibilities, pipes and Redirection, here documents, running a shell script, the shell as a
programming language, shell meta characters, file name substitution, shell variables, command substitution,
shell commands, the environment, quoting, test command, control structures, arithmetic in shell, shell script
examples, interrupt processing, debugging shell scripts.
Files: File types, File System Structure, file metadata: Inodes, kernel support for files, system calls for file I/O
operations: open, create, read, write, close, lseek, dup2, file status information: stat family, file and record
locking: fcntl function.
File permissions - chmod, fchmod, file ownership, links: soft and hard links: symlink, link, unlink. Directories:
Creating, removing and changing Directories, obtaining current working directory: getcwd, Directory contents,
Scanning Directories: opendir, readdir, closedir, rewinddir functions.
Introduction to IPC, IPC between processes on a single computer system, IPC between processes on different
systems, pies-creation, IPC between related processes using unnamed pipes, FIFOs: creation, IPC between
unrelated processes using FIFOs(Named pipes), differences between unnamed and named pipes, popen and
pclose library functions, Message Queues: Kernel support for messages, APIs for message queues,
client/server example. Semaphores-Kernel support for semaphores, APIs for semaphores, file locking with
semaphores.
85
UNI T-V SHARED MEMORY AND SOCKETS Classes: 09
Shared Memory: Kernel support for shared memory, APIs for shared memory, shared memory example,
Sockets: Introduction to Berkeley Sockets, IPC over a network, Client-Server model, Socket address structures
(unix domain and Internet domain), Socket system calls for connection oriented protocol and connectionless
protocol.
Text Books:
nd
1. T. Chan , Unix System Programming using C++, PHI, 2 Edition,2005.
2. Sumitabha Das, Unix Concepts and Applications, 4th Edition, TMH, 2011.
3. W. R. Stevens , Unix Network Programming, PHI, 2 nd Edition ,1999.
Reference Books:
1. Mathew, R. Stones, Wrox, Beginning Linux Programming, Wiley India Edition,4th Edition,2008.
2. Graham Glass, King Ables, Unix for programmers and users, 3rd Edition,Pearson, 2006.
3. Hoover, SystemProgramming with C and Unix, Pearson, 2 nd Edition ,2009.
4. K. A. Robbins, Unix System Programming, Communication, Concurrency and Threads, Pearson
Education, 6th Edition, 2007.
Web References:
1. http://www.fuky.org/abicko/beginning-linux-programming.pdf
2. https://www.pdc.kth.se/about/links/linux-programming-for-beginners
3. http://www.tutorialspoint.com/unix/unix_tutorial.pdf
4. http://www.rpi.edu/dept/arc/training/shell/s lides.pdf
E-Text Books:
1. http://onlinevideolecture.com/ebooks/?subject=Linux
2. http://www.onlineprogrammingbooks.com/linux-succinctly/
3. http://ebook-dl.com/item/beginning_linux_programming_4th_edition_neil_matthew_richard_stones/
86
RESEARCH METHODOLOGY
OBJECTIVES:
The course should enable the students to:
I. Identify an appropriate research problem in their interesting domain.
II. Organize and conduct research project.
III. Prepare a research project thesis report.
IV. Understand the law of patent and copyrights.
V. Adequate knowledge on process for filing Patent.
Definition, types of research, research approaches, research process, validity and reliability in research,
features of good design, types of research design, and basic principles of experimental design.
Errors in measurement, tests of sound measurement, scaling and scale construction techniques, forecasting
techniques, time series analysis, interpolation and extrapolation.
Primary data, questionnaire and interviews, collection of secondary data, cases and schedules.
Professional attitude and goals, concept of excellence, ethics in science and engineering, some famous frauds
in science, case studies.
Layout of a research paper, techniques of interpretation, making scientific presentation at conferences and
popular lectures to semi technical audience, participating in public debates on scientific issues.
Introduction, types of intellectual property, international organizations, agencies and treaties, importance of
intellectual property rights; Law of copy rights: Fundamental of copy right law, originality of material, rights
of reproduction, rights to perform the work publicly, copy right ownership issues, copy right registration,
notice of copy right, international copy right law; Law of patents: Foundation of patent law, patent searching
process, ownership rights and transfer.
87
Text Books:
1. C. R. Kothari, Research Methodology: Methods and Techniques, New Age International Publishers, 2 nd
Edition, 2004.
st
2. P. Gupta, Statistical Methods, Sultan Chand and Sons, New Delhi, 1 Edition, 2005.
nd
3. Richard W. Stim, Intellectual Property: Patents, Trademarks, and Copyrights, Cengage learning, 2
Edition, 2001.
Reference Books:
1. P. Narayana Reddy, G. V. R. K. Acharyulu, Research Methodology and Statistical Tools, Excel Books,
New Delhi, 1st Edition, 2008.
2. Prabuddha Ganguli, Intellectual Property Right, Unleashing the Knowledge Economy, Tata Mc Graw
Hill Publishing Company Ltd, 1st Edition, 2001.
Web References:
1. http://nptel.ac.in/courses/109103024/40
2. http://study.com/academy/topic/introduction-to-research-methods.html
3. https://www.vutube.edu.pk/vu-lectures/viewcategory/240/research-methods-sta630
E-Text Books:
1. http://www.metastudio.org/Science%20and%20Ethics/file/readDoc/535a76367d9d331598f49e2d/34_Hb_o
n_IPR.pdf
2. http://www.bits-pilani.ac.in/uploads/Patent_ManualOct_25th_07.pdf
3. http://euacademic.org/BookUpload/9.pdf
88
INDUSTRIAL AERODYNAMICS AND WIND ENERGY
OBJECTIVES:
The course should enable the students to:
I. Understand the atmospheric boundary layer and conditions.
II. Describe the wind energy and its application in turbines.
III. Familiarize with non-aeronautical uses of aerodynamics such as road vehicle, building aerodynamics and
problems of flow induced vibrations.
Causes of wind thermal drive, Coriolis effect, pressure gradient effect, Geotropic winds; Land and sea breeze,
mountain winds, thermals, cause of turbulence at ground level; Atmospheric boundary layer, velocity profile laws,
effects of terrain on atmospheric boundary Layer; Wind tunnels basic features and components; Wind tunnel
models, role of non-dimensional groups; Creation of atmospheric boundary layer type flow in a wind tunnel.
Ship propulsion, sails, lift and drag translators, modern yachts; Horizontal and vertical axis wind turbines: History,
first example of automatic feedback control for yaw in 16th century English windmills, classification. Horizontal
axis wind turbine: Elementary actuator disc theory, Betz coefficient; Definition of power coefficient and torque
coefficient for all wind turbines; Working principle, power coefficients, tip speed ratio explanation, by introductory
blade element theory, conventional horizontal axis wind turbine, savonious vertical axis wind turbine, Darries
vertical axis wind turbine, merits and demerits of horizontal axis wind turbines and vertical axis wind turbines.
Relative importance of rolling resistance and aerodynamics resistance, power requirements and drag coefficients of
automobiles, notch front and notch rear wind screens versus streamlined shape, causes of vortex formation and drag,
attached transverse vortex , trailing vortex, trailing vortex drag, effect of floor height on lift, effects of cut bank
angle; Rear end taper.
Side panels and bottom, effects of chamfering of edges and cambering of roof and side panels; Racing cars: Traction
and steering strip and use of aerofoils, high cornering seed; Commercial transport vehicles: Drag reduction on buses
and tucks, driver cabin and trailer combinations.
Use of light weight components in modern buildings, pressure distribution on low-rise buildings, wind forces on
buildings-aerodynamics of flat plate and circular cylinder , critical Reynolds no, sub -, super- & ultra critical
Reynolds No. Role of wind tunnel requirements in determining shape factors (Drag coefficients) of
building/structure shapes such as circular cylinder (chimneys & towers), rectangle, I- shape, L-shape, H-shape etc.
vortex shedding & transverse oscillating loads. Slenderness ratio & correction factor. Special problems of tall
buildings, interference effect of building.
89
UNI T-V FLOW INDUCED VIBATIONS Classes: 08
Classification: Vortex induced vibration and flow induced instability such as galloping and stall flutter; Effects of
Reynolds number on wake formation of bluff shapes; Vortex induced vibration: Experimental determination of
strouhal numbers for different shapes such as circular cylinder, square, rectangle, L-shape ect, universal strouhal
number, unsteady Bernoulli equation, concept of added mass, resonance; Fluid-structure interaction: Effect of
transverse cylinder motion on flow and wake, lock-in vortex shedding near resonant frequency, experimental
evidence of cylindrical motion influencing flow and thereby reducing strength of shed vortices; Methods of
suppression of vortex induced vibration; Galloping & Stall flutter: Motion of one degree-of-freedom, quasi steady
flow assumption, aerodynamic damping; Galloping: Force in the direction of plunging (transverse motion ) and
positive force coefficient, critical speed, galloping of transmission wire with winter ice, stall flutter of airfoils.
Text Books :
1. Siraj Ahmed, Wind Energy theory and practice, PHI learning Pvt Ltd., 3 rd Edition, 2015.
2. R. D. Blevins, Flow Induced Vibrations, Van Nostard, 2 nd Edition, 1990.
3. P. Sachs, Wind Forces in Engineering, Pergamon press, 2 nd Edition, 1988.
4. N. G. Calvert, Wind Power Principles, Charles Griffin & co. London, 1 st Edition, 1979.
Reference Books:
st
1. R. S. Scorer, Environmental Aerodynamics, Ellis Harword Ltd, England, 1 Edition, 1978.
nd
2. M. Sorvan, Aerodynamics Drag Mechanisms of Bluff Bodies and Road vehicles, plenum press, 2 Edition,
1978.
Web References:
1. http://www.mech.canterbury.ac.nz/research/fluid%20mechanics.shtml
2. http://www.journals.elsevier.com/journal-of-wind-engineering-and-industrial-aerodynamics
E-Text Books:
1. http://www.sciencedirect.com/science/journal/01676105
2. https://www.scribd.com/doc/42602999/Flow -Induced-Vibration-by-Robert-D-Blevins-2nd-Ed
3. http://store.elsevier.com/Wind-Forces-in-Engineering/Peter-Sachs/isbn-9781483148359/
90
VISION AND MISSION OF THE INSTITUTE
VISION
To bring forth professionally competent and socially sensitive engineers, capable of working across
cultures meeting the global standards ethically.
MISSION
To provide students with an extensive and exceptional education that prepares them to excel in their
profession, guided by dynamic intellectual community and be able to face the technically complex world
with creative leadership qualities.
Further, be instrumental in emanating new knowledge through innovative research that emboldens
entrepreneurship and economic development for the benefit of wide spread community.
M.TECH - PROGRAM OUTCOM ES (POs )
PO-1: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering
specialization to the solution of complex engineering problems (Engineering Knowledge).
PO-2: Identify, formulate, review research literature, and analyze complex engineering problems
reaching substantiated conclusions using first principles of mathematics, natural sciences, and
engineering sciences (Problem Analysis).
PO-3: Design solutions for complex engineering problems and design system components or processes
that meet the specified needs with appropriate consideration for the public health and safety, and
the cultural, societal, and environmental considerations (Design/Development of Solutions).
PO-4: Use research-based knowledge and research methods including design of experiments, analysis
and interpretation of data, and synthesis of the information to provide valid conclusions (Conduct
Investigations of Complex Problems).
PO-5: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools
including prediction and modeling to complex engineering activities with an understanding of the
limitations (Modern Tool Usage).
PO-6: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal
and cultural issues and the consequent responsibilities relevant to the professional engineering
practice (The Engineer and Society).
PO-7: Understand the impact of the professional engineering solutions in societal and environmental
contexts, and demonstrate the knowledge of, and need for sustainable development
(Environment and Sustainability).
PO-8: Apply ethical principles and commit to professional ethics and responsibilities and norms of the
engineering practice (Ethics).
PO-9: Function effectively as an individual, and as a member or leader in diverse teams, and in
multidisciplinary settings (Individual and Team Work).
PO-10: Communicate effectively on complex engineering activities with the engineering community and
with society at large, such as, being able to comprehend and write effective reports and design
documentation, make effective presentations, and give and receive clear instructions
(Communication).
PO-11: Project management and finance: Demonstrate knowledge and understanding of the engineering
and management principles and apply these to ones own work, as a member and leader in a
team, to manage projects and in multidisciplinary environments.
PO-12: Recognize the need for, and have the preparation and ability to engage in independent and life-
long learning in the broadest context of technological change (Life-long learning).
91
OBJECTIVES OF THE DEPARTMENT
DEPARTMENT OF MECHANICAL ENGINEERING
A graduate of Institute of Aeronautical Engineering, Mechanical Engineering should enjoy a successful career
in Mechanical Engineering or a related field after graduation. The program aims to:
PEO I: To provide students with a sound foundation in the mathematical, scientific and engineering
fundamentals necessary to formulate, solve and analyze engineering problems.
PEO II: To prepare students for successful careers in industry that meet the needs of local, Indian and
multinational companies.
PEO III: To develop the ability among students to synthesize data and technical concepts for application
to product design and prepares students to work as part of teams on multidisciplinary projects.
PEO IV: To promote student awareness for life-long learning and to introduce them to codes of
professional practice, ethics and prepare them for higher studies.
PSO I: To produce engineering professional capable of synthesizing and analyzing mechanical systems
including allied engineering streams.
PSO II: An ability to adopt and integrate current technologies in the design and manufacturing domain to
enhance the employability.
PSO III: To build the nation, by imparting technological inputs and managerial skills to become
Technocrats.
92
FREQUENTLY ASKED QUESTIONS AND ANSWERS ABOUT AUTONOMY
4. How will the Foreign Universities or other stake holders know that we are an Autonomous
College?
Autonomous status, once declared, shall be accepted by all the stake holders. The Govt. of Telangana
mentions autonomous status during the First Year admission procedure. Foreign Universities and
Indian Industries will know our status through our website.
5. What is the change of Status for Students and Teachers if we become Autonomous?
An autonomous college carries a prestigious image. Autonomy is actually earned out of our
continued past efforts on academic performances, our capability of self- governance and the kind of
quality education we offer.
6. Who will check whether the academic standard is maintained / improved after Autonomy? How
will it be checked?
There is a built in mechanism in the autonomous working for this purpose. An Internal Committee
called Academic Programme Evaluation Committee, which will keep a watch on the academics and
keep its reports and recommendations every year. In addition the highest academic council also
supervises the academic matters. The standards of our question papers, the regularity of academic
calendar, attendance of students, speed and transparency of result declaration and such other
parameters are involved in this process.
7. Will the students of IARE as an Autonomous College qualify for University Medals and Prizes
for academic excellence?
No. IARE has instituted its own awards, medals, etc. for the academic performance of the students.
However for all other events like sports, cultural on co-curricular organized by the University the
students shall qualify.
93
sends a list of successful candidates with their final Grades and Grade Point Averages including
CGPA to the University. Therefore with the prior permission of the University the co llege will be
entitled to give the provisional certificate.
10. Will Academic Autonomy make a positive impact on the Placements or Employability?
Certainly. The number of students qualifying for placement interviews is expected to improve, due to
rigorous and repetitive classroom teaching and continuous assessment. Also the autonomous status is
more responsive to the needs of the industry. As a result therefore, there will be a lot of scope for
industry oriented skill development built-in into the system. The graduates from an autonomous
college will therefore represent better employability.
11. What is the proportion of Internal and External Assessment as an Autonomous College?
Presently, it is 70 % external and 30% internal. As the autonomy matures the internal assessment
component shall be increased at the cost of external assessment.
15. What are the norms for the number of Credits per Semester and total number of Credits for
UG/PG programme?
These norms are usually defined by UGC or AICTE. Usually around 25 Credits per semester is the
accepted norm.
n n
SGPA Ci Gi / Ci
i 1 i 1
Where, Ci is the number of credits of the ith course and Gi is the grade point scored by the student in
the ith course and i represent the number of courses in which a student registered in the concerned
semester. SGPA is rounded to two decimal places.
94
17. What is a Cumulative Grade Point Average (CGPA)?
An up-to-date assessment of overall performance of a student from the time of his first registration is
obtained by calculating a number called CGPA, which is weighted average of the grade points
obtained in all the courses registered by the students since he entered the Institute.
n n
CGPA Ci Si / Ci
j 1 j 1
Where, S i is the SGPA of the ith semester and Ci is the total number of credits in that semester and
j represent the number of courses in which a students is registered upto the semester. CGPA is
rounded to two decimal places.
18. Is there any Software available for calculating Grade point averages and converting the
same into Grades?
Yes, The institute has its own MIS software for calculation of SGPA, CGPA, etc.
19. Will the teacher be required to do the job of calculating SGPAs etc. and convert the same into
Grades?
No. The teacher has to give marks obtained out of whatever maximum marks as it is. Rest is all done
by the computer.
22. Will the Degree be awarded on the basis of only final year performance?
No. The CGPA will reflect the average performance of all the semester taken together.
95
26. Is there any mechanism for Grievance Redressal?
The institute has grievance redressal committee, headed by Dean - Student affairs and Dean - IQAC.
29. Who will keep the Student Academic Records, University or IARE?
It is the responsibility of the Dean, Academics of the Autonomous College to keep and preserve all
the records.
31. Shall we require University approval if we want to start any New Courses?
Yes, It is expected that approvals or such other matters from an autonomous college will receive
priority.
96
INSTITUTE OF AERONAUTICAL ENGINEERING
(Autonomous)
Dundigal, Hyderabad - 500 043
To make the students attend the classes regularly fro m the first day of starting of classes and be aware of the
College regulat ions, the following Undertaking Form is introduced which should be signed by both student and
parent. The same should be submitted to the Dean, Academic.
1. I will attend all the classes as per the timetable fro m the starting day of the semester specified in the institute
Academic Calendar. In case, I do not turn up even after two weeks of starting of classes, I shall be inelig ible to
continue for the current academic year.
2. I will be regular and punctual to all the classes (theory/practical/drawing) and secure attendance of not less than
80% in every course as stipulated by Institute. I am fully aware that an attendanc e of less than 70% in more than
three courses will make me lose one year.
3. I will co mpulsorily follow the dress code prescribed by the college.
4. I will conduct myself in a high ly disciplined and decent manner both inside the classroom and on campus,
failing which suitable action may be taken against me as per the rules and regulations of the institute.
5. I will concentrate on my studies without wasting time in the Campus/Hostel/Residence and attend all the tests to
secure more than the minimu m prescribed Class/Sessional Marks in each course. I will submit the assignments
given in time to imp rove my performance.
6. I will not use Mobile Phone in the institute premises and also, I will not involve in any fo rm of ragging inside or
outside the campus. I am fully aware that using mobile phone to the institute premises is not permissible and
involving in Ragging is an offence and punishable as per JNTUH/UGC rules and the law.
7. I declare that I shall not indulge in ragging, eve-teasing, smoking, consuming alcohol drug abuse or any other
anti-social activ ity in the college premises, hostel, on educational tours, industrial visits or elsewhere.
8. I will pay tuition fees, examination fees and any other dues within the stipulated time as required by the
Institution / authorities, failing which I will not be permitted to attend the classes.
9. I will not cause or involve in any sort of violence or disturbance both within and outside the college campus.
10. If I absent myself continuously for 3 days, my parents will have to meet the HOD concerned/ Principal.
11. I hereby acknowledge that I have received a copy of IARE - R16 Academic Rules and Regulations, Syllabus
copy and hence, I shall abide by all the rules specified in it.
----------------------------------------------------------------------------------------------------------------------------------------
ACKNOWLEDGEMENT
I have carefully gone through the terms of the undertaking mentioned above and I understand that follo wing these
are for my/his/her own benefit and improvement. I also understand that if I/he/she fail to co mply with these terms,
shall be liab le for suitable action as per Institute/JNTUH/AICTE/UGC rules and the law. I undertake that I/he/she
will strictly follow the above terms.
97