Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 32 views

    Sem 2 1617 - Test 1

    Uploaded by

    Davidz Gan
    The document is a test paper for a Power Electronics course consisting of 3 questions. Question 1 has 4 parts identifying power semiconductor devices, their operating characteristics, and whether they are triggered by voltage or current. Question 2 involves calculating output voltage and current waveforms for an AC-DC converter circuit. Question 3 examines waveforms and calculations for a controlled full-wave rectifier circuit, including output voltage, current, switch current, and absorbed power. Formulas for trigonometry, integration, average voltage/current, and effective voltage/current are also provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sem 2 1617 - Test 1

    Uploaded by

    Davidz Gan
    32 views4 pages
    The document is a test paper for a Power Electronics course consisting of 3 questions. Question 1 has 4 parts identifying power semiconductor devices, their operating characteristics, and whether they are triggered by voltage or current. Question 2 involves calculating output voltage and current waveforms for an AC-DC converter circuit. Question 3 examines waveforms and calculations for a controlled full-wave rectifier circuit, including output voltage, current, switch current, and absorbed power. Formulas for trigonometry, integration, average voltage/current, and effective voltage/current are also provided.

    Original Description:

    Power Electronics Test 1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is a test paper for a Power Electronics course consisting of 3 questions. Question 1 has 4 parts identifying power semiconductor devices, their operating characteristics, and whether they are triggered by voltage or current. Question 2 involves calculating output voltage and current waveforms for an AC-DC converter circuit. Question 3 examines waveforms and calculations for a controlled full-wave rectifier circuit, including output voltage, current, switch current, and absorbed power. Formulas for trigonometry, integration, average voltage/current, and effective voltage/current are also provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    32 views4 pages

    Sem 2 1617 - Test 1

    Uploaded by

    Davidz Gan
    The document is a test paper for a Power Electronics course consisting of 3 questions. Question 1 has 4 parts identifying power semiconductor devices, their operating characteristics, and whether they are triggered by voltage or current. Question 2 involves calculating output voltage and current waveforms for an AC-DC converter circuit. Question 3 examines waveforms and calculations for a controlled full-wave rectifier circuit, including output voltage, current, switch current, and absorbed power. Formulas for trigonometry, integration, average voltage/current, and effective voltage/current are also provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    COLLEGE OF ENGINEERING

    SEMESTER 2 2016/17
    TEST 1

    PROGRAM : BEEE/BEPE

    SUBJECT : POWER ELECTRONICS

    SUBJECT CODE : EEEB393

    DATE : 18 NOVEMBER 2016

    TIME : 1 HOUR

    INSTRUCTION TO CANDIDATE
    1. Do NOT open this question paper until you are instructed to do so.

    2. This is a CLOSED book examination.

    3. This paper contains THREE (3) questions.

    4. A list of formula is provided in this question paper.

    5. Answer ALL questions.

    6. Write all answers in the answer booklet provided.

    7. The answers must be written using ink or ballpoint pen. Use of pencil is NOT
    allowed EXCEPT waveforms sketching.

    THIS QUESTION PAPER CONSISTS OF 4 PRINTED PAGES INCLUDING


    THIS COVER PAGE.

    1
    Question 1: [10 marks]

    (a) (b) (c) (d)


    Figure 1: Power Semiconductor Devices

    Figure 1 shows four types of power semiconductors. For each power semiconductor,
    i. State the device name.
    ii. State one of its operating characteristic.
    iii. Specify if the device is triggered ON by voltage or current. [2.5 marks 4]

    Question 2: [15 marks]


    is

    AC

    DC

    Figure 2: AC-DC Converter circuit with RL-load and voltage waveforms

    In Figure 2, the input voltage source is rated at 110 Vrms, 50 Hz. The RL-load is given
    as R = 4 W and L = 6 mH. The extinction angle, b is equivalent to 200.
    a) Sketch a potential AC-DC converter circuit which able to produce the
    corresponding output voltage waveform as shown in Figure 2. [3 marks]
    b) Briefly explain the operation of your proposed circuit in order to obtain the
    corresponding output voltage waveform. [4 marks]
    Vm
    c) Derive and prove the average load voltage, Vo,dc = [2 marks]
    p
    d) Determine the average load voltage, Vo,dc. [2 marks]
    e) Sketch the following waveforms on the given template.
    i. The output current, io (t), [2 marks]
    ii. The input current, is (t), [2 marks]
    Please indicate all the important peak quantities.

    2
    Question 3: [15 marks]

    T1

    v s1
    vs
    vs 2
    T2

    Figure 3: Controlled full-wave center-tapped transformer rectifier with R-load.

    Figure 3 shows a controlled full-wave center-tapped rectifier circuit. The ac source


    vs(t) = 100 sin wt, R = 50 W, vs1 = vs 2 = vs . Assume that all power switches are ideal

    with NO forward conduction loss. The firing angle, a, is set to 45,

    a) Sketch the following waveforms on the given template.


    i. The expected output voltage, vo (t), [3 marks]
    ii. The expected output current, io (t), [2 marks]
    iii. The expected switch T2 current, iT2 (t), [2 marks]
    iv. The expected switch T2 voltage, vT 2 (t), [3 marks]

    Please indicate all the important peak quantities.

    b) Derive and prove the effective load current, Io,rms as follows: [3 marks]

    Vm 1 a sin (2a )
    I o ,rms = - +
    R 2 2p 4p

    c) Determine the power absorbed by the load. [2 marks]

    -END OF QUESTION PAPER-

    3
    Formula:
    Trigonometry:
    sin 2 q + cos 2 q = 1
    sin ( A B ) = sin A cos B cos A sin B
    cos ( A B ) = cos A cos B m sin A sin B
    tan A tan B
    tan ( A B ) =
    1 m tan A tan B
    sin 2 A = 2 sin A cos A
    cos 2 A = (cos 2 A - sin 2 A) = (2 cos 2 A - 1) = (1 - 2 sin 2 A)
    2 tan A
    tan A =
    1 - tan 2 A

    Integration:

    sin x dx = - cos x + c cos x dx = sin x + c e


    x
    dx = e x + c
    - cos nx
    sin nx dx = n + c e nx
    sin nx
    cos nx dx = n + c e nx dx =
    n
    +c

    Average voltage/current:
    t0 +T

    v(t ) dt ,
    1
    vavg =
    T
    t0

    t0 +T

    i(t ) dt
    1
    iavg =
    T
    t0

    Effective voltage/current (RMS):,

    1 t +T 2 N
    v (t ) dt = V1,2rms + V22,rms + V32,rms + K =
    0

    vrms =
    T t
    V
    n =1
    2
    n ,rms
    0

    1 t +T 2 N
    i (t ) dt = I12,rms + I 22,rms + I 32,rms + K =
    0

    irms =
    T t
    I
    n=1
    2
    n ,rms
    0

    You might also like