Readme 1

Performance features 2

SIMATIC HMI

WinCC flexible 2008 SP4

Smart Panels

System Manual

06/2012
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.

DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE
indicates that an unintended result or situation can occur if the relevant information is not taken into account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be
used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property
damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified
personnel are those who, based on their training and experience, are capable of identifying risks and avoiding
potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:

WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended or
approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks
All names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described.
Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in
this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

Siemens AG Copyright Siemens AG 2012.

Industry Sector 08/2012 Technical data subject to change All rights reserved
Postfach 48 48
90026 NRNBERG
GERMANY
Table of contents

1 Readme........................................................................................................................................................5
1.1 Security note..................................................................................................................................5
1.2 General Notes...............................................................................................................................6
2 Performance features.................................................................................................................................11
2.1 Smart Panels...............................................................................................................................11
Index...........................................................................................................................................................13

Smart Panels
System Manual, 06/2012, 3
Readme 1
1.1 Security note

Security information
Siemens offers IT security mechanisms for its portfolio of automation and drive products in
order to support secure operation of the plant/machine. Our products are also continuously
developed further with regard to IT security. We therefore recommend that you keep yourself
informed about updates and upgrades for our products and always use the latest version of
each product. For information on this topic, refer to: http://support.automation.siemens.com
(http://www.siemens.de/automation/csi_en_WW) You can register for a product-specific
newsletter here.
For the safe operation of a plant/machine, however, it is also necessary to integrate the
automation components into an overall IT security concept for the entire plant/machine which
corresponds to the state-of-the-art IT technology. You can find information on this under:
http://www.siemens.com/industrialsecurity. (http://www.siemens.com/industrialsecurity)
Products used from other manufacturers should also be taken into account here.

Smart Panels
System Manual, 06/2012, 5
Readme
1.2 General Notes

1.2 General Notes

Contents
General information on WinCC flexible that could not be included in the manual or Online Help.

"Date/time" area pointer

Note that when you enter the year, values 90-99 result in years 1990 through 1999 and the
values 0-89 result in the years 2000 through 2089.

Copying HMI devices with system functions

If you copy, delete and reinsert an HMI device that contains system functions, it is possible
that the system functions are no longer available.

Support for new HMI devices

Two new HMI devices are available to you in WinCC flexible 2008 SP4:
1. Smart 700 IE
2. Smart 1000 IE

Color depth
The Smart 700 IE and Smart 1000 IE HMI devices have a color depth of 16 bits. This means
that objects can be displayed with a higher quality in the graphic view.

Dynamic control of the operability of objects.

The "Operability" animation is available to you for the following objects:
User view
Date/time field
I/O field
Graphic I/O field
Alarm view
Switch
Button

Smart Panels
6 System Manual, 06/2012,
 Readme
1.2 General Notes

Symbolic I/O field

Recipe view

Example at "Button" object:

Depending on the value of a tag, the user may or may not be able to operate the button in
Runtime. You use this dynamic control so that the user can operate the button only in certain
situations, for example, during maintenance work.
HMI devices concerned:
1. Smart 700 IE
2. Smart 1000 IE

Alarm indicator with advanced properties

The alarm indicator offers two new properties:

Smart Panels
System Manual, 06/2012, 7
Readme
1.2 General Notes

1. Size
The size of the alarm indicator is freely scalable. You change the size in the screen or in
the properties window under "Layout" in the "Properties" group.
2. Color
Select the different color settings under "Appearance" in the "Properties" group of the
properties window.

HMI devices concerned:

1. Smart 700 IE
2. Smart 1000 IE

Ethernet communication
The "Ethernet" transfer mode has been added to the transfer dialog.
HMI devices concerned:
1. Smart 700 IE
2. Smart 1000 IE

Communication with SIMATIC S7-200 Smart and SIMATIC S7-200

WinCC flexible 2008 SP4 supports both communication drivers. The transfer takes place
serially via Ethernet.

Communication with Modicon Modbus

A new PLC is available for the Modicon Modbus communication driver.

Smart Panels
8 System Manual, 06/2012,
 Readme
1.2 General Notes

Select the "Modicon Modbus" communication driver in the working area of the "Connections"
editor. Select the CPU type "Delta" on the "Parameters" tab.
HMI devices concerned:
1. Smart 700 IE
2. Smart 1000 IE

Communication with LOGO! (0BA7)

WinCC flexible 2008 SP4 supports the LOGO! communication driver. The transfer takes place
via Ethernet.
HMI devices concerned:
1. Smart 700 IE
2. Smart 1000 IE

Extended address area for OMRON communication driver

The address area for the "DM" user data type has been extended. The address range is
between "0" and "32767".
HMI devices concerned:
1. Smart 700 IE
2. Smart 1000 IE

Address area for 3rd party controllers

Check the address area that is valid or usable for communication with 3rd party HMI Panel
and controllers.

Validity of documents in the online help

The documents specified in the WinCC flexible SP2 or SP3 online help are also valid for WinCC
flexible SP4 without limitation.

Smart Panels
System Manual, 06/2012, 9
Performance features 2
2.1 Smart Panels

Introduction
The following table provides assistance in estimating whether a specific project is still within
the performance features of the HMI device.
The stated maximum values are not additive. We cannot guarantee proper functioning of
configurations that make full use of all system limits on the HMI devices.
In addition to the specified limits, the transfer time of process values must be observed during
serial communication. A low baud rate may have the result that process values are not updated.

Smart Panels

Smart 700 Smart 700 IE

Smart 1000 Smart 1000 IE
Variables
Number of variables in the project 500 800
Number of PowerTags -- --
Number of elements per array 100 100
Number of local variables -- --
Alarms
Number of alarm classes 32 32
Number of discrete alarms 200 200
Number of analog alarms 15 15
Character length of an alarm 80 80
Number of process values per alarm 8 8
Size of the alarm buffer 256 256
Number of queued alarm events 64 64
Images
Number of screens 50 100
Number of variables per screen 30 100
Number of complex objects per screen 5 5
Recipes
Number of recipes 5 5
Number of elements per recipe 20 20
User data length in bytes per data record -- --

Smart Panels
System Manual, 06/2012, 11
Performance features
2.1 Smart Panels

Smart 700 Smart 700 IE

Smart 1000 Smart 1000 IE
Number of data records per recipe 20 20
Number of recipe elements in the project -- --
Reserved memory for data records in the 40 KB 40 KB
internal Flash
Logs
Number of logs -- --
Trends
Number of trends 25 25
Text lists and graphics lists
Number of graphic lists 100 100
Number of text lists 150 150
Total number of lists 150 150
Number of entries per text or graphic list 30 30
Number of graphic objects 500 500
Number of text elements 500 500
Scripts
Number of scripts -- --
Communication
Number of serial connections 4 4 *)
Number of Ethernet connections -- 3
Number of connections based on the -- --
"SIMATIC HMI http Protocol"
Help system
Number of characters in a help text 320 320
Languages
Number of runtime languages 5 5
Scheduler
Tasks -- --
User administration
User groups 50 50
Permissions 32 32
Passwords 50 50
Project
Size of the project file "*.srt" 1024 KB 2048 KB

*) For the following communication types, only a serial connection is possible: Mitsubishi FX,
S7 200 Smart, S7 200 and Modbus RTU (CPU type: "Delta CPU").

Smart Panels
12 System Manual, 06/2012,
Index

H
HMI device
Performance features, 11
System limits, 11

P
Performance features
HMI device, 11

S
System limits
HMI device, 11

Smart Panels
System Manual, 06/2012, 13