Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
528 views

Important Questions

This document contains questions about various electronic circuits and concepts including: 1. A combinational clipper circuit and its working. 2. The working of a voltage doubler circuit and the drain characteristics of JFETs. 3. The difference between positive and negative feedback and how negative feedback modifies amplifier gain. 4. The Barkhausen Criteria for oscillations and what a zero crossing detector is. 5. The operation of a triangular wave generator and limitations of an ideal integrator. 6. The difference between triangular wave and ramp generators using op-amps. 7. Factors to consider for selecting an amplifier's operating point and deriving equations for a voltage divider bias circuit.

Uploaded by

ramjidr
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
528 views

Important Questions

This document contains questions about various electronic circuits and concepts including: 1. A combinational clipper circuit and its working. 2. The working of a voltage doubler circuit and the drain characteristics of JFETs. 3. The difference between positive and negative feedback and how negative feedback modifies amplifier gain. 4. The Barkhausen Criteria for oscillations and what a zero crossing detector is. 5. The operation of a triangular wave generator and limitations of an ideal integrator. 6. The difference between triangular wave and ramp generators using op-amps. 7. Factors to consider for selecting an amplifier's operating point and deriving equations for a voltage divider bias circuit.

Uploaded by

ramjidr
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

1. Sketch a combinational clipper circuit. Explain its working.

2. Explain voltage doubler ckt


3. Explain the drain characteristics of JFET and mark the pinch-off voltage.
4. Differentiate between positive and negative feedback. Explain how does the negative
feedback modify the gain of an amplifier.
5. Explain the Barkhausen Criteria of oscillations.
6. What is a zero crossing detector?
7. Explain the operation of a triangular wave generator
8. What are the limitations of an ideal integrator? Design a circuit which overcome the errors
of ideal integrator
9. Distinguish between triangular wave and ramp generator using op-amp.
10. What is cross over distortion? Why most power amplifiers used in practice are designed to
operate in class AB stage?

11. What factors are to be considered for selecting the operating point Q for an amplifier?
12. Draw a voltage divider bias circuit and derive the equations of voltage and current at input
and output terminals.
13. Derive the equation for voltage gain and current gain for a BJT using approximate h-
parameter model for Common Emitter configuration.
14. How does the constructional feature of a MOSFET differ from that of a JFET?
15. Why the gate junction of FET is always reverse biased? List the parameters of JFET from
characteristics.
16. Explain any compensation technique adopted in transistor amplifier for reducing the drift of
operating point.
17. Explain construction f enhancement type MOSFET

18. Draw the circuit of a Two Stage RC- Coupled amplifier and explain its working and
advantages.
19. Derive the equation for power output and conversion efficiency of a class Aseries fed
amplifier
20. Write short notes on the following:
a) CMRR
b) Slew rate
c) Common mode gain
d) Differential mode gain
21. Draw the inverting and non-inverting amplifier circuits of an OP-AMP in closed loop
configuration. Obtain the expressions for the closed loop gain in these circuits.
22. With the help of internal functional diagram, explain how a monostable multivibrator works
with use of 555 timer
23. Draw the circuit of a Half Wave Precision Rectifier circuit and Explain its operation
24. What are the advantages and features of instrumentation amplifier? Derive the expression
for output voltage of instrumentation amplifier.
25. What is the function of precision rectifier circuits? What is the significance of UTP and LTP in
Schmitt trigger circuits?
26. Discuss how logarithmic amplifier is realized with op-amp circuitry.
27. What is the basic principle of RC oscillators? Design a phase shift oscillator to oscillate at
500Hz.
28. Explain Schmitt trigger
29. Derive voltage gain of inverting ampifier

Also study following Problems from

Module 1: Clipper & Clamper , transistor biasing topics

Module 2: Mosfet biasing

Module 5: Op-amp summer difference amplifier

You might also like