Funk Modular

Pump Drives
Selection Guide

The simplest solutions

are also the most reliable
 Funk Modular Pump Drives

Built stronger and smarter

from the inside out
Modular hydraulic pump drives
When you look inside a Funk hydraulic pump drive, you are seeing the result of over 50 years of off-highway power transmission
experience. This knowledge led to advancements including the development of the first modular hydraulic pump drive design.
Our modular approach gives you a choice of gear ratios, pump adapters, mounting options, and more. With over 5,000 option
combinations, we can provide a pump drive that meets your configuration, reliability, and durability needs. Add up all the advantages,
and it is easy to see why Funk pump drives are number one.

3
1 2 4

5 6 7 8 9

1 Ball bearings include a built-in oil reservoir in the 4 Cast iron housings are built to withstand hard use in 7 High quality spur gears provide quiet operation
outer race to provide uninterrupted lubrication. tough applications. and allow the use of ball bearings.

2 Viton shaft seals provide long life in high- 5 Dedicated pathways provide lubrication to bearings 8 Wet splines provide a long, trouble-free life.
temperature applications. and splines.
9 Pump adapter plates can be easily changed for use
3 Engine housing adapters are available for a variety 6 Internal spline adapters make it quick and easy to with different pump sizes.
of flywheel sizes. configure pump drives to a variety of applications.

2
Introduction
Perfect fit
With more than 5,000 pump drive configurations up to 950 hp Pump drive selection procedure................4
(708 kW), we are sure to have the pump drive that meets your Service factors.........................................5
needs. Our application engineers provide support to help you Clutch capacities......................................5
choose the best pump drive for your application.
Series 28000.................................... 6 17
360 hp* (268 kW) max input power
High quality 750 lb-ft* (1017 Nm) max input torque
1, 2, or 3 pump drives
We use the latest manufacturing technology to ensure we
deliver the highest quality products to you. A, B, C, or D available SAE pump sizes

Series 59000.................................. 18 27
700 hp* (522 kW) max input power
Fast service 1250 lb-ft* (1694 Nm) max input torque
Whether you need a new pump drive or service support on an 2, 3, or 4 pump drives
existing drive, our modular assembly system and experienced A, B, C, or D available SAE pump sizes
regional distribution network lets us get you what you need fast.
Series 56000.................................. 28 39
950 hp* (708 kW) max input power
Integration support 2000 lb-ft* (2712 Nm) max input torque
2, 3, 4, or 5 pump drives
Getting the most out of your equipment depends on close
integration between all components. Our application experts D, E, or F available SAE pump sizes
can help integrate your entire system from the engine to the Series 57000.................................. 40 45
pump drives, powershift transmissions, HMD transmissions, 950 hp (708 kW) max input power
planetary drives, and inboard planetary axles. 2000 lb-ft* (2712 Nm) max input torque
4 pump drives 14 in and 16 in centers
C, D, or E available SAE pump sizes

SAE engine flywheel and

housing standard........................... 46 47
Formulas........................................ 48 49
SAE hydraulic pump and
motor drive standards............................50

* Ratings may vary depending upon application and service.

Application and installation are subject to review by John Deere.

3
 Funk Modular Pump Drives

Pump drive selection procedure

The performance and reliability of a hydraulic pump drive is directly related to the proper selection of the pump drive
series and options. Follow the steps below to determine the options required for your application.

Selection of the proper pump drive series can be accomplished by using either the torque method or power method
described below.

Torque method Power method

1. Determine the net peak torque (lb-ft, or Nm) transmitted to 1. Determine the net peak power (hp or kW) transmitted to the
the pump drive from the prime mover. Remember to deduct pump drive from the prime mover.
any continuous parasitic losses.
2. Determine the equivalent power (hp or kW) by multiplying the net
2. Determine the maximum pump drive input torque (lb-ft, or peak power by the appropriate service factor for the application.
Nm) required to drive the hydraulic pumps attached to the A list of service factors are found on the table on page 5.
pump drive. Be sure to consider the pump drive ratio.
3. Using the equivalent power calculated above, select the proper
3. Using the lesser of the torque values calculated above, select pump drive series with a maximum input power capacity that
a pump drive series with a maximum input torque capacity exceeds the equivalent power for the application.
that exceeds the torque required for the application.

Additional steps required for determining the proper pump drive configuration:
4. Determine the number of pump pads required by making a selection from the models available within the pump drive series. Be
sure to take into consideration the maximum output torque rating per pad, and the center distance between the mounting pads
for clearance of the pumps and their hydraulic plumbing.

5. Select a gear ratio from the options available for the selected model which will provide the desired pump speed and flow. Be sure
to consider the maximum recommended speed for both the pump drive series and the hydraulic pumps being used.

6. Select the desired input configuration from the available options for the pump drive series:
Engine mounted drive plate or torsional coupling driven
Engine mounted clutch-driven (consider clutch limiting speeds and torque capacity)
Remote mounted

7. Select the desired output configurations from the available options for the pump drive series:
Pump adapter plates
Pump shaft adapter sleeves (if required)
Drive shaft or PTO options

8.After the pump drive configuration has been determined, your John Deere Power Systems distributor can assist you in reviewing
the application to determine if it will meet your expectations for service life based on the duty cycle provided.

4
Service factors
Service factors
Prime mover Duration of service Uniform Moderate shock Heavy shock
Occasional 1/2 hr. per day 0.50 0.80 1.25
Electric motor, Intermittent 3 hr. per day 0.80 1.00 1.50
steam turbine, or
hydraulic motor Over 3 hr. up to and incl. 10 hr. per day 1.00 1.25 1.75
Over 10 hr. per day 1.25 1.50 2.00
Occasional 1/2 hr. per day 0.80 1.00 1.50
Multi-cylinder Intermittent 3 hr. per day 1.00 1.25 1.75
internal combustion engine Over 3 hr. up to and incl. 10 hr. per day 1.25 1.50 2.00
Over 10 hr. per day 1.50 1.75 2.25
Occasional 1/2 hr. per day 1.00 1.25 1.75
Single cylinder Intermittent 3 hr. per day 1.25 1.50 2.00
internal combustion engine Over 3 hr. up to and incl. 10 hr. per day 1.50 1.75 2.25
Over 10 hr. per day 1.75 2.00 2.50

Clutch capacities
Operating speeds and working torque Important notice
Max. safe The presence of torsional resonant frequencies in the system can
Clutch Working torque
operating speed
model lb-ft (Nm) cause damage to components in the drivetrain.
(rpm)
C-110 3100 328 (444.4)
The assembler of the drive and driven equipment is responsible for
C-111 2850 387 (524.4) ensuring that damaging torsional resonant frequencies are not
SP-211 2850 910 (1233.1) present in the system.
SP-214 2400 1620 (2195.1)
Torsional vibration analysis can be made by the engine manufacturer,
torsional coupling supplier, and independent consultants. John Deere
is prepared to supply the torsional data relating to the pump drive
components and assist in evaluation of analyses in order to prevent
damage to transmissions designed and manufactured by John Deere.

5
 Funk Modular Pump Drives

Series 28000 single direct drive

Ratings
Input torque Clutch-dependent
Input speed Clutch-dependent

Pump rotation
Enginewise

Approximate weight
28T 120 lb (55 kg)

Option selections
Refer to pages 20 21.

28T

6
 Specifications in (mm)

Ratings 28105 mm (in)

Max input torque 650 lb-ft (880 Nm)
Input speed As required
Max power 360 hp (268 kW)

Pump rotation
Enginewise

Approximate weight
28105 50 lb (23 kg)

Option selections
Refer to pages 20 21.

Ratings
Max input torque 500 lb-ft (678 Nm) 281FC (flex coupling)
Input speed As required
Max power 250 hp (186 kW)

Pump rotation
Enginewise

Approximate weight
281FC 35 lb (16 kg)

Flywheel covers
SAE sizes 2, 3, or 4

Pump adaptations
SAE sizes B, BB, C, or D

Drive flange sizes Note:

0.38 (9.6) SAE 4
Nominal clutch size
0.5 (12.7) SAE 2 and 3
10 in (254.0 mm) or 11-1/2 in (292.1 mm)
Refer to pages 20 21 for other dimensions.

7
 Funk Modular Pump Drives

Series 28000 single

Ratings Oil
Max input torque 575 lb-ft (780 Nm) Any oil that meets EP gear lubrication specification MIL-L-2105C
Max output torque 575 lb-ft (780 Nm) or API classification GL-5.
Max input or output speed 3000 rpm
Max input power 325 hp (242 kW) Approximate weight
Max output power 325 hp (242 kW)
28101 120 lb (55 kg)
For further explanation of ratings, see service factors on page 5. 28103 110 lb (50 kg)
28275 175 lb (80 kg)

Pump rotation
Anti-enginewise Option selections
Refer to pages 20 21.

28101

8
 Specifications mm (in)

28103

28275

9
 Funk Modular Pump Drives

Series 28000 double

127 mm (5 in) gear centers
Ratings Oil
Max input torque 650 lb-ft (881 Nm) Any oil that meets EP gear lubrication specification MIL-L-2105C
Max output torque 575 lb-ft (780 Nm) or API classification GL-5.
Max input or output speed 3000 rpm
Max input power 360 hp (268 kW) Approximate weight
Max output power 325 hp (242 kW) per pump pad
28102 160 lb (73 kg)
For further explanation of ratings, see service factors on page 5. 28104 150 lb (68 kg)
28180 215 lb (98 kg)

Pump rotation
Anti-enginewise Option selections
Refer to pages 20 21.

28102

10
 Specifications mm (in)

28104

28180

11
 Funk Modular Pump Drives

Series 28000 double

152.7 mm (6 in) gear centers
Ratings Oil
Max input torque 750 lb-ft (1017 Nm) Any oil that meets EP gear lubrication specification MIL-L-2105C
Max output torque 650 lb-ft (881 Nm) per pump pad or API classification GL-5.
Max input or output speed 3000 rpm
Max input power 360 hp (268 kW) Approximate weight
Max output power 360 hp (268 kW) per pump pad
2826XXP 175 lb (80 kg)
For further explanation of ratings, see service factors on page 5. 2826XR 165 lb (75 kg)
2826XXC 230 lb (105 kg)

Pump rotation
Anti-enginewise Option selections
Refer to pages 20 21.

2826XXP

12
 Specifications mm (in)

2826XR

2826XXC

13
 Funk Modular Pump Drives

Series 28000 triple

Ratings Oil
Max input torque 750 lb-ft (1017 Nm) Any oil that meets EP gear lubrication specification MIL-L-2105C
Max output torque 650 lb-ft (881 Nm) per pump pad or API classification GL-5.
Max input or output speed 3000 rpm
Max input power 360 hp (268 kW) Approximate weight
Max output power 360 hp (268 kW) per pump pad
28211 220 lb (100 kg)
For further explanation of ratings, see service factors on page 5. 28212 210 lb (96 kg)
28213 275 lb (125 kg)

Pump rotation
Anti-enginewise Option selections
Refer to pages 20 21.

28211

14
 Specifications mm (in)

28212

28213

15
 Funk Modular Pump Drives

Series 28000 option selections

Input Plate-driven Clutch-driven
Flywheel cover housing in (mm)
SAE A B Bolts
size dimension dimension required
14 20.875 (530.2) 20.125 (511.2) 12-7/16 (11.1)-14
2 18.375 (466.7) 17.625 (447.7) 12-3/8 (9.5)-16
3 16.875 (428.6) 16.125 (409.6) 12-3/8 (9.5)-16
4 15.000 (381.0) 14.250 (362.0) 12-3/8 (9.5)-16
51 13.125 (333.4) 12.375 (314.3) 8-3/8 (9.5)-16
1 Available on 28105 only.

Clutch cover housing in (mm)

SAE size A dimension B dimension H dimension Bolts required
13 20.875 (530.2) 20.125 (511.2) 9.625 (244.5) 12-7/16(11.1)-14
2 18.375 (466.7) 17.625 (447.7) 4.875 (123.8) 12-3/8 (9.5)-16
3
2 18.375 (466.7) 17.625 (447.7) 9.625 (244.5) 12-3/8 (9.5)-16
3 16.875 (428.6) 16.125 (409.6) 4.875 (123.8) 12-3/8 (9.5)-16
3
3 16.875 (428.6) 16.125 (409.6) 9.625 (244.5) 12-3/8 (9.5)-16
3 SP-211 only.
4 15.000 (381.0) 14.250 (362.0) 4.875 (123.8) 12-3/8 (9.5)-16 4 Not available on 28T.

Drive plate assembly in (mm)

Nominal flywheel size C dimension D dimension E dimension F dimension G dimension Holes Hole size
8 (203.2) 10.375 (263.5) 9.625 (244.5) 2.04 (51.8) or 2.44 (62.0) 3.94 (100.0) 2.44 (62.0) 6 13/32 (10.3)
10 (254.0) 12.375 (314.3) 11.625 (295.3) 2.44 (62.0) or 2.83 (71.9) 3.94 (100.0) 2.12 (53.8) 8 13/32 (10.3)

3.94 (100.0) 1.56 (39.6) or

11-1/2 (292.1) 13.875 (352.4) 13.125 (333.4) 2.44 (62.0) or 2.83 (71.9) 8 13/32 (10.3)
2.12 (53.8)
14 (355.6) 18.375 (466.7) 17.250 (438.2) 2.83 (71.9) or 3.15 (80.0) 3.94 (100.0) 1.00 (25.4) 8 17/32 (13.5)

Pump drive clutch data in (mm)

Nominal Working C D E dimension F G Hole
clutch size Clutch no. Holes
torque dimension dimension (pilot bearing) dimension dimension size
10 328 lb-ft 2.83 (72.0) or
C-110 12.375 (314.3) 11.625 (295.3) 3.94 (100.0) 2.12 (53.8) 8 13/32 (10.3)
(254) (444.4 Nm) 2.44 (62.0)
11-1/2 387 lb-ft 2.83 (72.0) or 3.94 (100.0) 1.56 (39.6) or
C-111 13.875 (352.4) 13.125 (333.4) 8 13/32 (10.3)
(292.1) (524.4 Nm) 2.44 (62.0) 2.12 (53.8)
11-1/2 910 lb-ft 2.83 (72.0) or 3.94 (100.0) 1.56 (39.6) or
SP-211 13.875 (352.4) 13.125 (333.4) 8 13/32 (10.3)
(292.1) (1233.1 Nm) 2.44 (62.0) 2.12 (53.8)

16
Gear ratios Spline adapter
Specifications in (mm)
28000 single and double
5 in (127 mm)
.628:1 .71:1 .89:1 1:1 1.12:1 1.41:1 1.592:1
28000 triple and double
6 in (152 mm) 13T. 8/16 D.P.
.647:1 .714:1 .826:1 .867:1 .909:1 1:1 1.10:1
1.27:1 1.40:1 Output
Pump adapter sleeves in (mm)
Pump adapter plates SAE A B Internal
These pump adapter plates are available for Series 28000 size dimension dimension spline
(except 28T) models. B 1.81 (46.0) .75 (19.1) 7/8 (22.2)-13T. 16/32 P.
2.00 (50.8) .94 (23.9) 1-1/4 (31.8)-14T. 12/24 P.
C
SAE A 1.87 (47.5) .81 (20.6) 1-1/4 (31.8)-14T. 12/24 P.
2.00 (50.8) .94 (23.9) 1-3/8 (34.9)-21T. 16/32 P.
BB 2.00 (50.8) .94 (23.9) 1 (25.4)-15T. 16/32 P.

Input or output drive assemblies in (mm)

Flanged shaft

SAE B

2-1/4 (57.2) Diameter keyed shaft

SAE C

1-3/8 (34.9)-10 Straight-side splined shaft

SAE D

17
 Funk Modular Pump Drives

Series 59000 double

Ratings Oil
Max input torque 1250 lb-ft (1695 Nm) Any oil that meets EP gear lubrication specification MIL-L-2105C
Max output torque 650 lb-ft (881 Nm) per pump pad or API classification GL-5.
Max input or output speed 3000 rpm
Max input power 700 hp (522 kW) Approximate weight
Max output power 360 hp (268 kW) per pump pad
5928XXP 240 lb (109 kg)
For further explanation of ratings, see service factors on page 5. 5928XR 215 lb (98 kg)
5928XXC 320 lb (145 kg)

Pump rotation
Anti-enginewise Option selections
Refer to pages 30 31.

5928XXP

18
 Specifications mm (in)

5928XR

5928XXC

19
 Funk Modular Pump Drives

Series 59000 triple

Ratings Oil
Max input torque 1250 lb-ft (1695 Nm) Any oil that meets EP gear lubrication specification MIL-L-2105C
Max output torque 650 lb-ft (881 Nm) per pump pad or API classification GL-5.
Max input or output speed 3000 rpm
Max input power 700 hp (522 kW) Approximate weight
Max output power 360 hp (268 kW) per pump pad
593WXXP 290 lb (132 kg)
For further explanation of ratings, see service factors on page 5. 593WXR 265 lb (120 kg)
593WXXC 370 lb (168 kg)

Pump rotation
Anti-enginewise Option selections
Refer to pages 30 31.

593WXXP

20
 Specifications mm (in)

593WXR

593WXXC

21
 Funk Modular Pump Drives

Series 59000 four

Ratings Oil
Max input torque 1250 lb-ft (1695 Nm) Any oil that meets EP gear lubrication specification MIL-L-2105C
Max output torque 650 lb-ft (881 Nm) per pump pad or API classification GL-5.
Max input or output speed 3000 rpm
Max input power 700 hp (522 kW) Approximate weight
Max output power 360 hp (268 kW) per pump pad
594PXXP 340 lb (154 kg)
For further explanation of ratings, see service factors on page 5. 594PXR 315 lb (143 kg)
594PXXC 420 lb (191 kg)

Pump rotation
Anti-enginewise Option selections
Refer to pages 30 31.

594PXXP

22
 Specifications mm (in)

594PXR

594PXXC

23
 Funk Modular Pump Drives

Series 59000 four (wide)

Ratings Oil
Max input torque 1250 lb-ft (1695 Nm) Any oil that meets EP gear lubrication specification MIL-L-2105C
Max output torque 650 lb-ft (881 Nm) per pump pad or API classification GL-5.
Max input or output speed 3000 rpm
Max input power 700 hp (522 kW) Approximate weight
Max output power 360 hp (268 kW) per pump pad
594WXXP 389 lb (176 kg)
For further explanation of ratings, see service factors on page 5. 594WXXR 364 lb (165 kg)
594WXXC 469 lb (213 kg)

Pump rotation
Anti-enginewise Option selections
Refer to pages 30 31.

594WXXP

24
 Specifications mm (in)

594WXXR

594WXXC

25
 Funk Modular Pump Drives

Series 59000 option selections

Input Plate-driven Clutch-driven
Flywheel cover housing in (mm)
SAE A B Bolts
size dimension dimension required
1 20.875 (530.2) 20.125 (511.2) 12-7/16 (11.1)-14
2 18.375 (466.7) 17.625 (447.7) 12-3/8 (9.5)-16
3 16.875 (428.6) 16.125 (409.6) 12-3/8 (9.5)-16

Clutch cover housing in (mm)

SAE size A dimension B dimension H dimension Bolts required
1 20.875 (530.2) 20.125 (511.2) 7.500 (190.5) 12-7/16 (11.1)-14
1* 20.875 (530.2) 20.125 (511.2) 10.250 (260.4) 12-7/16 (11.1)-14
2 18.375 (466.7) 17.625 (447.7) 7.500 (190.5) 12-3/8 (9.5)-16
3 16.875 (428.6) 16.125 (409.6) 7.500 (190.5) 12-3/8 (9.5)-16
* For SP-214 only.

Drive plate assembly in (mm)

Nominal flywheel size C dimension D dimension E dimension F dimension G dimension Holes Hole size
10 (254.0) 12.375 (314.3) 11.625 (295.3) 2.44 (62.0) or 2.83 (71.9) 3.94 (100.0) 2.12 (53.8) 8 13/32 (10.3)

3.94 (100.0) 1.56 (39.6) or

11-1/2 (292.1) 13.875 (352.4) 13.125 (333.4) 2.44 (62.0) or 2.83 (71.9) 8 13/32 (10.3)
2.12 (53.8)
14 (355.6) 18.375 (466.7) 17.250 (438.2) 2.83 (71.9) or 3.15 (80) 3.94 (100.0) 1.00 (25.4) 8 17/32 (13.5)

Pump drive clutch data in (mm)

Nominal Working C D E dimension F G Hole
clutch size Clutch no. Holes
torque dimension dimension (pilot bearing) dimension dimension size
11-1/2 387 lb-ft 2.83 (72.0) or
C-111 13.875 (352.4) 13.125 (333.4) 3.94 (100.0) 1.56 (39.6) 8 13/32 (10.3)
(292.1) (524.4 Nm) 2.44 (62.0)
11-1/2 910 lb-ft 2.83 (72.0) or
SP-211 13.875 (352.4) 13.125 (333.4) 3.94 (100.0) 1.56 (39.6) 8 13/32 (10.3)
(292.1) (1233.1 Nm) 2.44 (62.0)
14 1620 lb-ft 3.15 (80.0) or
SP-214 18.375 (466.7) 17.250 (438.2) 3.94 (100.0) 1.00 (25.4) 8 17/32 (13.5)
(355.6) (2195 Nm) 2.83 (72.0)

26
Gear ratios Spline adapter
Specifications in (mm)
59000 double, triple, four
.72:1 .78:1 .84:1 .898:1 1:1 1.13:1 1.2:1
59000 four (wide)
.74:1 1:1
13T. 8/16 D.P.

Pump adapter plates Output

Pump adapter sleeves in (mm)
These pump adapter plates are available for Series 59000 models.
SAE A B Internal
Size dimension dimension spline
SAE A B 1.81 (46.0) .75 (19.1) 7/8 (22.2)-13T. 16/32 P.
2.00 (50.8) .94 (23.9) 1-1/4 (31.8)-14T. 12/24 P.
C 1.87 (47.5) .81 (20.6) 1-1/4 (31.8)-14T. 12/24 P.
2.00 (50.8) .94 (23.9) 1-3/8 (34.9)-21T. 16/32 P.
BB 2.00 (50.8) .94 (23.9) 1 (25.4)-15T. 16/32 P.

Input drive assemblies in (mm)

* Refer to page 21 for output drive assemblies.

SAE B
Flanged shaft

SAE C
2-1/4 (57.2) Diameter keyed shaft

SAE D
1-3/8 (34.9)-10 Straight-side splined shaft

27
 Funk Modular Pump Drives

Series 56000 double

Ratings Oil
Max input torque 2000 lb-ft (2712 Nm) or clutch Any oil that meets EP gear lubrication specification MIL-L-2105C
rating-dependent or API classification GL-5.
Max output torque 2000 lb-ft (2712 Nm) per pump pad
Max input or output speed 2500 rpm
Approximate weight
Max input power 950 hp (708 kW) or clutch
rating-dependent 56005 450 lb (204 kg)
Max output power 950 hp (708 kW) per pump pad 56006 425 lb (193 kg)
56004 600 lb (272 kg)
For further explanation of ratings, see service factors on page 5.

Option selections
Pump rotation
Refer to pages 42 43.
Anti-enginewise, except through shaft-drive, enginewise.

56005

28
 Specifications mm (in)

56006

56004

29
 Funk Modular Pump Drives

Series 56000 triple

Ratings Oil
Max input torque 2000 lb-ft (2712 Nm) or clutch John Deere HY-GARD or any oil that meets John Deere standard
rating-dependent JDM J20C.
Max output torque 2000 lb-ft (2712 Nm) per pump pad
Max input or output speed 2500 rpm
Approximate weight
Max input power 950 hp (708 kW) or clutch
rating-dependent 56016 725 lb (329 kg)
Max output power 950 hp (708 kW) per pump pad 56018 700 lb (318 kg)
56019 910 lb (413 kg)
For further explanation of ratings, see service factors on page 5.

Option selections
Pump rotation
Refer to pages 42 43.
Anti-enginewise.

56016

30
 Specifications mm (in)

56018

56019

31
 Funk Modular Pump Drives

Series 56000 four

Ratings Oil
Max input torque 2000 lb-ft (2712 Nm) Any oil that meets EP gear lubrication specification MIL-L-2105C
Max output torque 2000 lb-ft (2712 Nm) per pump pad or API classification GL-5.
Max input or output speed 2500 rpm
Max input power 950 hp (708 kW) Approximate weight
Max output power 950 hp (708 kW) per pump pad
56009 480 lb (218 kg)
For further explanation of ratings, see service factors on page 5.
Option selections
Pump rotation Refer to pages 42 43.
Anti-enginewise, except through shaft-drive.

32
 Specifications mm (in)

56009

33
 Funk Modular Pump Drives

Series 56000 five

Ratings Oil
Max input torque 2000 lb-ft (2712 Nm) or clutch Any oil that meets EP gear lubrication specification MIL-L-2105
rating-dependent or API classification GL-5.
Max output torque 1500 lb-ft (2034 Nm) per pump pad
Max input or output speed 2500 rpm
Approximate weight
Max input power 950 hp (708 kW) or clutch
rating-dependent 56012 615 lb (279 kg)
Max output power 700 hp (522 kW) per pump pad 56013 580 lb (263 kg)
56011 775 lb (352 kg)
For further explanation of ratings, see service factors on page 5.

Option selections
Pump rotation
Refer to pages 42 43.
Enginewise*
*NOTE: Engine side pump mounts on models 56011 and 56012 may be
limited on pump size due to interference with adapter housing and/or engine
components.

56012

34
 Specifications mm (in)

56013

56011

35
 Funk Modular Pump Drives

Series 56000 five deep sump

Ratings Oil
Max input torque 2000 lb-ft (2712 Nm) or clutch John Deere HY-GARD or any oil that meets John Deere standard
rating-dependent JDM J20C.
Max output torque 1500 lb-ft (2034 Nm) per pump pad
Max input or output speed 2500 rpm
Approximate weight
Max input power 950 hp (708 kW) or clutch
rating-dependent 565LXXP 884 lb (402 kg)
Max output power 700 hp (522 kW) per pump pad 565LXR 849 lb (386 kg)
565LXXC 1044 lb (475 kg)
For further explanation of ratings, see service factors on page 5.

Option selections
Pump rotation
Refer to pages 42 43.
Enginewise*
*NOTE: Engine side pump mounts on models 565LXXP and 565LXXC may be
limited on pump size due to interference with adapter housing and/or engine
components.

565LXXP

36
 Specifications mm (in)

565LXR

565LXXC

37
 Funk Modular Pump Drives

Series 56000 option selections

Input Plate-driven Clutch-driven
Flywheel cover housing in (mm)
SAE A B Bolts
size dimension dimension required
0 26.750 (679.5) 25.500 (647.7) 16-1/2 (12.7)-13
1 20.875 (530.2) 20.125 (511.2) 12-7/16 (11.1)-14
2 18.375 (466.7) 17.625 (447.7) 12-3/8 (9.5)-16

Clutch cover housing in (mm)

SAE size A dimension B dimension H dimension Bolts required
1 20.875 (530.2) 20.125 (511.2) 10.250 (260.4) 12-7/16 (11.1)-14

Drive plate assembly in (mm)

Nominal flywheel size C dimension D dimension G dimension Holes Hole size
11-1/2 (292.1) 13.875 (352.4) 13.125 (333.4) 1.56 (39.6) 8 13/32 (10.3)
14 (355.6) 18.375 (466.7) 17.250 (438.2) 1.00 (25.4) 16 17/32 (13.5)
18 (457.2) 22.5 (571.5) 21.375 (542.9) .62 (15.7) 6 21/32 (16.7)

Pump drive clutch data in (mm)

Nominal Working C D E dimension F G Hole
clutch size Clutch no. Holes
torque dimension dimension (pilot bearing) dimension dimension size
11-1/2 910 lb-ft 2.44 (62.0) or
SP-211 13.875 (352.4) 13.125 (333.4) 3.94 (100.0) 1.56 (39.6) 8 13/32 (10.3)
(292.1) (1233.1 Nm) 2.83 (72.0)
14 1620 lb-ft 2.83 (72.0) or
SP-214 18.375 (466.7) 17.250 (438.2) 3.94 (100.0) 1.00 (25.4) 8 17/32 (13.5)
(355.6) (2195 Nm) 3.15 (80.0)

Output
Pump flange data in (mm)
SAE No.
Pilot size B.C.D. Tap size
size holes
5.750 (146.1) 2 1/2 (12.7)-13
B 4.000 (101.6) 5.000 (127.0) 4 1/2 (12.7)-13
7.125 (181.0) 2 5/8 (15.9)-11
C 5.000 (127.0) 6.375 (161.9) 4 1/2 (12.7)-13
D 6.000 (152.4) 9.000 (228.6) 4 3/4 (19.1)-10
E 6.500 (165.1) 12.500 (317.5) 4 3/4 (19.1)-10
F 7.000 (177.8) 13.781 (350.0) 4 1 (25.4)-8

38
 Spline adapter Specifications in (mm)

19T. 8/16P.

Gear ratios Output

56000 double Pump adapter sleeves in (mm)
.76:1 .875:1 1:1 1.14:1 1.31:1 SAE A dim. B dim. Internal spline
size
56000 triple
BB* 4.25 (108.0) 1.88 (47.8) 15T. 16/32P.
.882:1 1:1 1.14:1
B* 4.25 (108.0) 1.88 (47.8) 13T. 16/32P.
56000 four
CC* 4.25 (108.0) 1.88 (47.8) 17T. 12/24P.
.76:1 .875:1 1:1 1.14:1 1.31:1
C* 4.25 (108.0) 1.88 (47.8) 14T. 12/24P.
56000 five
D* 4.25 (108.0) 1.88 (47.8) 13T. 8/16P.
.875:1 1:1 1.18:1
D 2.5 (63.5) 1.88 (47.8) 13T. 8/16P.
56000 five (deep sump)
E 2.5 (63.5) 1.88 (47.8) 13T. 8/16P.
.722:1 .857:1 1:1
F 2.88 (7.32) 1.88 (47.8) 15T. 8/16P.

* These are for use with add-on adapter plates.

Input drive assemblies in (mm)

39
 Funk Modular Pump Drives

Series 57000 Four (14 in centers)

Ratings Oil
Max input torque 2000 lb-ft (2712 Nm) or clutch John Deere HY-GARD or any oil that meets John Deere standard
rating-dependent JDM J20C.
Max output torque 2000 lb-ft (2712 Nm) per pump pad
Max input or output speed 2500 rpm
Approximate weight
Max input power 950 hp (708 kW) or clutch
rating-dependent 5714P 725 lb (329 kg)
Max output power 950 hp (708 kW) per pump pad 5714R 700 lb (318 kg)
5714C 775 lb (352 kg)

Pump rotation
Anti-enginewise Option selections
Refer to pages 48 49.

5714P

40
 Specifications mm (in)

5714R

5714C

41
 Funk Modular Pump Drives

Series 57000 four (16 in centers)

Ratings Oil
Max input torque 2000 lb-ft (2712 Nm) or clutch John Deere HY-GARD or any oil that meets John Deere standard
rating-dependent JDM J20C.
Max output torque 2000 lb-ft (2712 Nm) per pump pad
Max input or output speed 2500 rpm
Approximate weight
Max input power 950 hp (708 kW) or clutch
rating-dependent 5716P 770 lb (350 kg)
Max output power 950 hp (708 kW) per pump pad 5716R 735 lb (334 kg)
5716C 920 lb (418 kg)

Pump rotation
Anti-enginewise Option selections
Refer to pages 48 49.

5716P

42
 Specifications mm (in)

5716R

5716C

43
 Funk Modular Pump Drives

Series 57000 option selections

Input Plate-driven Clutch-driven
Flywheel cover housing in (mm)
SAE A B Bolts
size dimension dimension required
0 26.750 (679.5) 25.500 (647.7) 16-1/2 (12.7)-13
1 20.875 (530.2) 20.125 (511.2) 12-7/16 (11.1)-14
2 18.375 (466.7) 17.625 (447.7) 12-3/8 (9.5)-16

Clutch cover housing in (mm)

SAE size A dimension B dimension H dimension Bolts required
1 20.875 (530.2) 20.125 (511.2) 10.250 (260.4) 12-7/16 (11.1)-14

Drive plate assembly in (mm)

Nominal flywheel size C dimension D dimension G dimension Holes Hole size
11-1/2 (292.1) 13.875 (352.4) 13.125 (333.4) 1.56 (39.6) 8 13/32 (10.3)
14 (355.6) 18.375 (466.7) 17.250 (438.2) 1.00 (25.4) 16 17/32 (13.5)
18 (457.2) 22.5 (571.5) 21.375 (542.9) .62 (15.7) 6 21/32 (16.7)

Pump drive clutch data in (mm)

Nominal Working C D E dimension F G Hole
clutch size Clutch no. Holes
torque dimension dimension (pilot bearing) dimension dimension size
11-1/2 910 lb-ft 2.44 (62.0) or
SP-211 13.875 (352.4) 13.125 (333.4) 3.94 (100.0) 1.56 (39.6) 8 13/32 (10.3)
(292.1) (1233.1 Nm) 2.83 (72.0)
14 1620 lb-ft 2.83 (72.0) or
SP-214 18.375 (466.7) 17.250 (438.2) 3.94 (100.0) 1.00 (25.4) 8 17/32 (13.5)
(355.6) (2195 Nm) 3.15 (80.0)

44
 Spline adapter
Specifications in (mm)

19T. 8/16P.

Gear ratios Output

57000 four (14 in centers) Pump adapter sleeves in (mm)
.667:1 .837:1 1:1 1.195:1 SAE A B Internal spline
57000 four (16 in centers) size dimension dimension
.774:1 .83:1 1:1 1.204:1 C 2.88 (73.15) 2.00 (50.80) 14T. 12/24P.
D 2.5 (63.5) 1.88 (47.78) 13T. 8/16P.
E 2.5 (63.5) 1.88 (47.78) 13T. 8/16P.

Pump adapter plates in (mm) Input drive assemblies in (mm)

SAE C

SAE D

SAE E

45
 Funk Modular Pump Drives

SAE engine flywheel

and housing standards
The table and drawings below give dimensions for flywheel housings. The tolerances shall be +0.000 and -0.13 (0.005), and the maximum
The drawings also show spacing for 8-, 12-, and 16-bolt flange eccentricity shall be 0.064 (0.0025) [indicated runout 0.13 (0.005)].
mounting patterns.
The mating housing flange pilot diameter shall be 6.4 (0.25) long,
and its lead-in chamfer shall not exceed 2.0 (0.08) in length. The
Mating housing flanges fillet radius between the mounting flange face and the pilot
The capscrew holes on the mating housing flanges shall be 1.19 diameter shall not exceed 1.0 (0.04) R.
(0.047) larger than the nominal diameter of the capscrews used on
the flywheel housing. The maximum variation of the face of the mating housing flange
from its true position, when rotated about its axis, shall be 0.064
The diameter of the pilot on the flange of the mating housing shall be (0.0025) [indicated runout 0.13 (0.005)].
the same as the nominal diameter of the bore in the flywheel housing:

Flywheel housing dimensions mm (in)

Tolerance Tapped holes
SAE Bore Bore
A B C E Hole
no. diameter eccentricity/ Holes size
0.00 face deviation
00 787.40 (31.000) +0.25 (0.010) 0.30 (0.012) 882.6 (34.75) 850.90 (33.500) 100.0 (3.94) 16 1/2-13
0 647.70 (25.500) +0.25 (0.010) 0.25 (0.010) 711.2 (28.00) 679.45 (26.750) 100.0 (3.94) 16 1/2-13
1/2 584.20 (23.000) +0.20 (0.008) 0.25 (0.010) 647.7 (25.50) 619.12 (24.375) 100.0 (3.94) 12 1/2-13
1 511.18 (20.125) +0.13 (0.005) 0.20 (0.008) 552.4 (21.75) 530.22 (20.875) 100.0 (3.94) 12 7/16-14
2 447.68 (17.625) +0.13 (0.005) 0.20 (0.008) 489.0 (19.25) 466.72 (18.375) 100.0 (3.94) 12 3/8-16
3 409.58 (16.125) +0.13 (0.005) 0.20 (0.008) 450.8 (17.75) 428.62 (16.875) 100.0 (3.94) 12 3/8-16
4 361.95 (14.250) +0.13 (0.005) 0.15 (0.006) 403.4 (15.88) 381.00 (15.000) 100.0 (3.94) 12 3/8-16
5 314.32 (12.375) +0.13 (0.005) 0.15 (0.006) 355.6 (14.00) 333.38 (13.125) 71.4 (2.81) 8 3/8-16
6 266.70 (10.500) +0.13 (0.005) 0.15 (0.006) 307.8 (12.12) 285.75 (11.250) 71.4 (2.81) 8 3/8-16

46
The tables and drawing give dimensions for flywheel housings.

For dimensions of industrial power take-offs with driving-ring-type

over-center clutches, see SAE J620.

For flywheel dimensions for engine-mounted torque converters

without front disconnect clutch, see SAE J927.

Flywheel dimensions mm (in)

Clutch no. A Ba, b C D E F
6-1/2 184.2 (7.25) 215.90 (8.500) 200.02 (7.875) 127.0 (5.00) 71.4 (2.81) 63.5 (2.50)
7-1/2 206.2 (8.12) 241.30 (9.500) 222.25 (8.750) 71.4 (2.81) 63.5 (2.50)
8 225.6 (8.88) 263.52 (10.375) 244.48 (9.625) 100.0 (3.94) 76.2 (3.00)
10 276.4 (10.88) 314.32 (12.375) 295.28 (11.625) 196.8 (7.75) 100.0 (3.94) 76.2 (3.00)
11-1/2 314.5 (12.38) 352.42 (13.875) 333.38 (13.125) 203.2 (8.00) 100.0 (3.94)
14 409.4 (16.12) 466.72 (18.375) 438.15 (17.250) 222.2 (8.75) 100.0 (3.94) 101.6 (4.00)
16 460.2 (18.12) 517.52 (20.375) 488.95 (19.250) 254.0 (10.00) 100.0 (3.94) 104.6 (4.12)
18 498.3 (19.62) 571.52 (20.375) 542.92 (21.375) 100.0 (3.94) 104.6 (4.12)
21 584.2 (23.00) 673.10 (26.500) 641.35 (25.250) 100.0 (3.94) 146.0 (5.75)
24 644.7 (25.38) 733.42 (28.875) 692.15 (27.250) 100.0 (3.94) 146.0 (5.75)

Flywheel dimensions mm (in)

Tapped holes
Clutch no. G H J Kc Lbc
No. holes Hole size
6-1/2 30.2 (1.19) 12.7 (0.50) 9.7 (0.38) 17.5 (0.69) 52.000 (2.0472) 6 5/16-18
7-1/2 30.2 (1.19) 12.7 (0.50) 12.7 (0.50) 17.5 (0.69) 52.000 (2.0472) 8 5/16-18
8 62.0 (2.44) 12.7 (0.50) 12.7 (0.50) 19.0 (0.75) 62.000 (2.4409) 6 3/8-16
10 53.8 (2.12) 15.7 (0.62) 12.7 (0.50) 28.4 (1.12) 72.000 (2.8346) 8 3/8-16
11-1/2 39.6 (1.56) 28.4 (1.12) 22.4 (0.88) 31.8 (1.25) 72.000 (2.8346) 8 3/8-16
14 25.4 (1.00) 28.4 (1.12) 22.4 (0.88) 38.1 (1.50) 80.000 (3.1496) 8 1/2-13
16 15.7 (0.62) 28.4 (1.12) 22.4 (0.88) 44.4 (1.75) 100.000 (3.9370) 8 1/2-13
18 15.7 (0.62) 31.8 (1.25) 31.8 (1.25) 44.4 (1.75) 100.000 (3.9370) 6 5/8-11
21 0.0 (0.00) 31.8 (1.25) 31.8 (1.25) 57.2 (2.25) 130.000 (5.1181) 12 5/8-11
24 0.0 (0.00) 31.8 (1.25) 31.8 (1.25) 57.2 (2.25) 130.000 (5.1181) 12 3/4-10

C k is length of bore for pilot bearing; L is nominal diameter of bearing. Diameter

NOTE: Suggested tolerances are to be measured on assembled engine; for
measuring procedure, see SAE J1033. and fit are to suit installation. Maximum eccentricity is 0.13 (0.005) total indicator
reading (see footnote b).
* Diameter tolerance of driving-ring pilot bore B is +0.13 (0.005), -0.000; maximum
d Tapped holes shall be threaded in accordance with UNC Class 2B tolerances of
eccentricity is 0.13 (0.005) total indicator reading (see footnote b); face runout
maximum total indicator reading is 0.0005 times the measured diameter. Diameter ANSI B1.1 screw threads, and the minimum length of thread engagement shall be
tolerance for mating driving-ring, etc. pilot diameter is +0.000, -0.13 (0.005). 1.5 times the nominal diameter.
b Eccentricity between driving-ring pilot bore B and pilot bearing bore L is not to

exceed 0.20 (0.008) total indicator reading.

47
 Funk Modular Pump Drives

Formulas
Fluid power formulas
Formula for: Word formula
Fluid pressure =
force (lb)
Pounds/square inch unit area (sq in)
Cylinder area = x radius2 (in) or
Square inches (head end) = x diameter2 (in)/4

Cylinder area =

x (diameter piston2- diameter rod2)
Square inches (rod end) 4

Cylinder force = pressure (psi) x net area (sq in)

Pounds, push or pull
Cylinder velocity =
231 x flow rate (gpm)
Feet/second 12 x 60 x net area (sq in)
x radius2 (in) x stroke (in)
=
Cylinder volume capacity 231
Gallons net area (sq in) x stroke (in)
=
231
Cylinder flow rate =
12 x 60 x velocity (ft/sec) x net area (sq in)
Gallons/minute 231
pressure (psi) x F.M. displacement (in3/rev)
=
2
Fluid motor torque =
horsepower x 63025
Inch pounds rpm
flow rate (gpm) x pressure (psi) x 36.77
=
rpm
Fluid motor speed =
231 x flow rate (gpm)
Revolutions/minute F.M. displacement (in3/rev)
Fluid motor power =
torque output (in/lb) x rpm
Horsepower output 63025
Pump outlet flow =
rpm x pump displacement (in3/rev)
Gallons/minute 231
Pump input power =
flow rate output (gpm) x pressure (psi)
Horsepower required 1714 x efficiency (overall)
Flow velocity =
.3208 x flow rate through I.D. (gpm)
Feet/second internal area (sq in)

48
Formulas (Metric)
Fluid power formulas
Formula for: Word formula
Fluid pressure =
force (N)
(Bar) area (cm2) x 10

Cylinder area = x radius2 (cm) or

(cm2) (head end) = x diameter2/4

Cylinder area = x (diameter piston2- diameter rod2)/4

(cm ) (rod end)
2

Cylinder force = pressure (bar) x area (cm2) x 10

(N)
Cylinder velocity =
flow rate (l/min)
(m/s) cylinder area (cm2) x 6

Cylinder volume capacity =

cylinder area (cm2) x stroke (cm)
(liters) 1000

Cylinder flow rate = area (cm2) x velocity (m/s) x 600

(l/m)
Fluid motor torque =
pres. (bar) x displacement (cm3/rev) x efficiency
(Nm) 20 x

Fluid motor speed =

flow (l/m) x 1000
(rpm) displacment (cm3// rev)

Fluid motor power =

torque (Nm) x speed (rpm)
(kW) 9549

Pump outlet flow =

displacment (cm3// rev) x speed (rpm)
(l/m) 1000

Pump input power =

flow (l/m) x pressure (bar)
(kW) 600 x efficiency

Flow velocity =
flow (l/m)
(m/s) area (cm2) x 6

49
 Funk Modular Pump Drives

SAE hydraulic pump and

motor drive standards
SAE standards
The SAE standards and specifications shown below are intended primarily for hydraulic power transmission pumps and motors on
construction and industrial machinery and equipment.

We provide pump mounting flange and spline configurations to match most typical SAE flange sizes used within the power range of the
pump drive. Other non-SAE standard spline sizes may be available. Consult your John Deere Power Systems distributor for other spline
sizes available.

Flywheel housing dimensions in (mm)

SAE Spline 30
A W X K S M R DS2 LS
size involute

A 3.250 (82.55) 0.250 (6.35) 4.188 0.438 .625 0.938 9 Teeth

3.248 (82.49) 0.230 (5.84) (106.38) (11.13) (15.88) (23.82) 16/32 D. P.

B 4.000 (101.60) 0.380 (9.65) 2.000 5.750 5.000 0.562 0.562 .875 1.312 13 Teeth
3.998 (101.55) 0.360 (9.14) (50.80) (146.05) (127.00) (14.27) (14.27) (22.23) (33.32) 16/32 D. P.

BB 4.000 (101.60) 0.360 (9.14) 2.000 5.750 5.000 0.562 0.562 1.000 1.500 15 Teeth
3.998 (101.55) 0.340 (8.63) (50.80) (146.05) (127.00) (14.27) (14.27) (25.40) (38.10) 16/32 D. P.

C 5.000 (127.00) 0.500 (12.70) 2.500 7.125 6.375 0.68 0.562 1.25 1.875 14 Teeth
4.998 (126.95) 0.480 (12.19) (63.5) (180.98) (161.93) (17.27) (14.27) (31.75) (46.63) 12/24 D. P.

CC 5.000 (127.00) 0.500 (12.70) 2.500 7.125 6.375 0.688 0.562 1.500 2.125 17 Teeth
4.998 (126.95) 0.480 (12.19) (63.5) (180.98) (161.93) (17.48) (14.27) (38.10) (53.98) 12/24 D. P.

D 6.000 (152.40) 0.500 (12.70) 2.750 9.000 9.000 0.812 0.812 1.75 2.625 13 Teeth
5.998 (152.35) 0.480 (12.19) (69.85) (228.60) (228.60) (20.62) (20.62) (44.45) (66.68) 8/16 D. P.

E 6.500 (165.10) 0.625 (15.88) 2.750 12.500 12.500 1.062 0.812 1.75 2.625 13 Teeth
6.498 (165.05) 0.605 (15.37) (69.85) (317.50) (317.50) (26.97) (20.62) (44.45) (66.68) 8/16 D. P.

F 7.000 (177.80) 0.625 (15.88) 2.750 13.781 13.781 1.062 1.062 1.998 3.125 15 Teeth
6.998 (177.75) 0.605 (15.37) (69.85) (350.04) (350.04) (26.97) (26.97) (50.75) (79.38) 8/16 D. P.

50
Worldwide
locations
North America
John Deere Power Systems
3801 West Ridgeway Avenue
P.O. Box 5100
Waterloo, IA 50704-5100
Phone: +1 800 533 6446 (U.S.)
Phone: +1 319 292 6060 (Canada)
Fax: +1 319 292 5075
E-mail: jdpower@JohnDeere.com
John Deere Power Systems
Doornelei, 24
2018 Antwerpen
Belgium
Phone: + 32 3 238 89 69
Fax: + 32 3 248 54 98

51
 This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text
may include finance, credit, insurance, product options and accessories NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL DEALER FOR DETAILS.
John Deere reserves the right to change specification and design of all products described in this literature without notice.

www.JohnDeere.com/jdpower
DKD1507 Litho in U.S.A. (09-05)