321321

The worlds
Thechoice
worldsfor corrosion
choice protection
for corrosion protection

GEOMET 321 is applied

GEOMET
321toisprotect
appliedfasteners
to protectand many type
fasteners andof metallic
many type of metallic
parts from corrosion
parts from and is used
corrosion in
and many
is industries.
used in many It can be combined
industries. It can be combined
with PLUS,with
DACROLUB

or GEOKOTE

topcoats to
provide a very broad
PLUS , DACROLUB or GEOKOTE topcoats to provide a very broad
range of friction
rangecoefficients. It is the most
of friction coefficients. widely
It is usedwidely
the most product in zinc
used product in zinc
flake technology.
flake technology.
Thin dry-film, non-electrolytic
Thin dry-film, non-electrolytic
Water-based chemistry
Water-based chemistry
Passivated zinc and aluminium
Passivated flakes
zinc and in a binder,
aluminium flakespatented chemistry
in a binder, patented chemistry

Chrome free alternative to DACROMET 320
Chrome free alternative to DACROMET 320

Metallic silver appearance

Metallic silver appearance
Characterictics and performance*
Characterictics and performance*
The coefficient
Theof friction can of
coefficient befriction
adjusted
cantobetargeted
adjustedvalues ranging
to targeted from 0.06
values to 0.20
ranging from 0.06 to 0.20
(ISO 16047) with NOF METAL COATING GROUPs selected topcoats
(ISO 16047) with NOF METAL COATING GROUPs selected topcoats
It can be used
Itwith
can orbewithout topcoat
used with or without topcoat
No hydrogen embrittlement
No hydrogen embrittlement
Excellent assembly
Excellentandassembly
multi-tightening behavior (withbehavior
and multi-tightening lubricated topcoat)
(with lubricated topcoat)
Good mechanical damage (test method D24 1312, USCAR 32) and chemical
Good mechanical damage (test method D24 1312, USCAR 32) and chemical
(test VDA 621-412) resistance
(test VDA 621-412) resistance
Performance maintained
Performance atmaintained
elevated temperatures (up to 300C)(up to 300C)
at elevated temperatures
Paintable coating
Paintable coating
Electrical conductivity
Electricalfor most application
conductivity for mostprocesses
application processes
Bimetallic compatibility with aluminum
Bimetallic compatibility with aluminum
High corrosion resistance*
High corrosion resistance*
Coating Weight Coating
Salt Spray Test (IS0 Cyclic Test
Weight Salt 9227/ASTM B117)
Spray Test (IS0 9227/ASTM B117) Cyclic Test

> 24 g/m2 > 240

> 24 g/m 2 hours without white
> 240 rustwithout white rust
hours
> 720 hours without redhours
> 720 rust without red rust

> 24 g/m2 + > 24 g/m 2

> 720+ hours without red rust 4 cycles ACT
topcoat > 720 hours without red rust 4 cycles ACT
topcoat 60 cycles GMW 14872
60 cycles GMW 14872
60 cycles SAE J2334
60 cycles SAE J2334

> 36 g/m2 > 1000

> 36 g/m 2 hours without redhours
> 1000 rust without red rust

* Results may vary depending

* Results on substrate, geometry of parts and type of application processes
may vary depending on substrate, geometry of parts and type of application processes
 321321

A p p l i c a tA
i opnp lpi rcoact ieosns p r o c e s s

GEOMET 321
GEOMET 321 canby
can be applied beDip-Spin,
applied by Dip-Spin,
Spray, Spray, Dip-Drain-Spin
Dip-Drain-Spin using bulk orusing
rack bulk or rack

Health
Health and and Safety
Safety

InfoPrd/GEOMET321/GB/0712/05
InfoPrd/GEOMET321/GB/0712/05
Aqueous dispersion
Aqueous dispersion
Complies Complies
with REAChwith REACh
Complies Complies
with with the 2000/53/CE
the 2000/53/CE and 2002/95/CE
and 2002/95/CE directives directives

Among
Among our our w orldwide
w orldwide specifications
specifications
is a registered trademark of NOF CORPORATION
is a registered trademark of NOF CORPORATION

BMW (GS BMW (GS 90010)

90010)
CHRYSLER
CHRYSLER (PS-5873, PS-9666)
(PS-5873, PS-9666)
DAIMLER
(DBL 9440) (DBL 9440)
DAIMLER
FIAT (Capitolato
FIAT 9.57513)
(Capitolato 9.57513)
FORD (S438)
FORD (S438)
GENERAL
MOTORS
GENERAL(GMW3359-GMW14)
MOTORS (GMW3359-GMW14)
IVECO (18-1101)
IVECO (18-1101)
PORSCHE
(PN 11011) (PN 11011)
PORSCHE
RENAULT
(01-71-002)
RENAULT (01-71-002)
RENAULT
Trucks
RENAULT(01-71-4002)
Trucks (01-71-4002)
VOLKSWAGEN (TL245)
VOLKSWAGEN (TL245)
VOLVO Cars (VCS 5737,29)
VOLVO Cars (VCS 5737,29)
ALSTOM (DTRF 150213)
ALSTOM (DTRF 150213)
BOMBARDIER (BT/CE-WN30-02)
BOMBARDIER (BT/CE-WN30-02)
CATERPILLAR (1E1675G) (1E1675G)
CATERPILLAR
JOHN DEERE
JOHN (JDM F13) (JDM F13)
DEERE
KNORRBREMSE (N12005)
KNORR BREMSE (N12005)

International standards
International standards
EN ISO 10683
EN -ISO
Fasteners:
10683 -non-electrolytic zinc flake coatings
Fasteners: non-electrolytic zinc flake coatings
EN 13858 - EN
Non-electrolytic zinc flake coatings
13858 - Non-electrolytic on iron
zinc flake and steel
coatings parts
on iron and steel parts
ASTM F1136 / F1136
ASTM M - /Zinc/Aluminum
F1136 Corrosion Protective
F1136 M - Zinc/Aluminum Corrosion Protective
Coatings forCoatings
Fasteners
for Fasteners

www.nofmetalcoatings.com
www.nofmetalcoatings.com