© 2002 ASM International. All Rights Reserved. www.asminternational.

org
Atlas of Stress-Strain Curves (#06825G)

Atlas of
Stress-Strain Curves

Second Edition

INTERNATIONAL

The Materials
Information Society

Materials Park, OH 44073-0002

www.asminternational.org
© 2002 ASM International. All Rights Reserved. www.asminternational.org
Atlas of Stress-Strain Curves (#06825G)

Copyright © 2002
by
ASM International®
All rights reserved

No part of this book may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the written permission of the copyright owner.

First printing, December 2002

Great care is taken in the compilation and production of this book, but it should be made clear that NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE GIVEN IN CONNECTION WITH THIS PUBLICATION. Although this information is believed to
be accurate by ASM, ASM cannot guarantee that favorable results will be obtained from the use of this publication alone. This publi-
cation is intended for use by persons having technical skill, at their sole discretion and risk. Since the conditions of product or material
use are outside of ASM’s control, ASM assumes no liability or obligation in connection with any use of this information. No claim of
any kind, whether as to products or information in this publication, and whether or not based on negligence, shall be greater in amount
than the purchase price of this product or publication in respect of which damages are claimed. THE REMEDY HEREBY PROVIDED
SHALL BE THE EXCLUSIVE AND SOLE REMEDY OF BUYER, AND IN NO EVENT SHALL EITHER PARTY BE LIABLE
FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHETHER OR NOT CAUSED BY OR RESULTING FROM THE
NEGLIGENCE OF SUCH PARTY. As with any material, evaluation of the material under end-use conditions prior to specification is
essential. Therefore, specific testing under actual conditions is recommended.

Nothing contained in this book shall be construed as a grant of any right of manufacture, sale, use, or reproduction, in con-
nection with any method, process, apparatus, product, composition, or system, whether or not covered by letters patent, copyright, or
trademark, and nothing contained in this book shall be construed as a defense against any alleged infringement of letters patent, copy-
right, or trademark, or as a defense against liability for such infringement.

Comments, criticisms, and suggestions are invited, and should be forwarded to ASM International.

Prepared under the direction of the ASM International Technical Book Committee (2001–2002), Charles A. Parker, Chair.
Prepared with assistance from the ASM International Materials Properties Database Committee, P.J. Sikorsky, Chair.
ASM International staff who worked on this project included Charles Moosbrugger, Technical Editor; Veronica Flint,
Acquisitions Editor; Bonnie Sanders, Manager of Production; Carol Terman, Production Project Manager; and Scott Henry, Assistant
Director of Reference Publications.

Library of Congress Cataloging-in-Publication Data

Atlas of stress-strain curves.—2nd ed.

p. cm.
SAN: 204-586—T.p. verso.
ISBN: 0-87170-739-X
1. Stress-strain curves—Atlases. 2. Metals—Testing. I. ASM International.

TA460 .A86 2002

620.1'63—dc 21
2002027674

ASM International®
Materials Park, OH 44073-0002
www.asminternational.org

Printed in the United States of America

© 2002 ASM International. All Rights Reserved. www.asminternational.org
Atlas of Stress-Strain Curves (#06825G)

Contents

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

Representation of Stress-Strain Behavior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Ferrous Metals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Cast Iron (CI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Carbon Steel (CS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Alloy Steel (AS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
High-Strength Steel (HS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Stainless Steel (SS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Tool Steel (TS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269

Nonferrous Metals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277

Cast Aluminum (CA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
Wrought Aluminum (WA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
Aluminum Laminates (LA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503
Copper (Cu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 515
Magnesium (Mg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555
Nickel (Ni) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 631
Reactive and Refractory Metals (RM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 705
Titanium (Ti) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 729
Pure Metals and Miscellaneous Alloys (MA). . . . . . . . . . . . . . . . . . . . . . . . . 799

Alloy Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 809

UNS Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 815

iii
© 2002 ASM International. All Rights Reserved. www.asminternational.org
Atlas of Stress-Strain Curves (#06825G)

Preface

In this information age, mechanical property data are plentiful. Many people are involved in a project of this size, and we would
However, locating needed information quickly, judging the validity of like to thank those who have contributed to, or assisted, this effort.
the data, and making reasoned comparisons of data can be daunting. First and foremost, ASM International thanks the materials researchers
Stress-strain curves condense much information about the mechanical who created the original curves—without their efforts this volume
behavior of metals into a convenient form. From these basic curves the would not exist.
engineer can extract such information as the strength, ductility, forma- Donna M. Walker, FASM, Stressolvers Inc., and Veronica Flint,
bility, elasticity, and other information useful in predicting the per- ASM staff, initiated the project to revise and expand this book. ASM
formance of a particular alloy under stress. International thanks them for their efforts in helping to define the
ASM International published the first edition of the Atlas of Stress- goals for this project and in acquiring many of the new curves to be
Strain Curves, a collection of over 550 curves, in 1986. This book, added to the book.
along with the Atlas of Fatigue Curves, Atlas of Creep and Stress- Special thanks are extended to Special Metals, Gil Kaufman,
Rupture Curves, and the Atlas of Stress-Corrosion and Corrosion FASM, Kaufman Associates, and Bruce Boardman, FASM, Deere &
Fatigue Curves, has formed a set of useful materials property resources Company, for their contributions of stress-strain curves.
for the engineer, materials scientist, and designer. Hiro Okamoto and his associates performed the huge task of
Well over three years ago—with the encouragement, assistance, redrawing the curves to normalize their presentation, and we are grate-
and guidance of the ASM Technical Books and Materials Properties ful for their accurate and timely work.
Database Committees—ASM International embarked on the project to The organization and final quality of the data as seen in the book
create this updated, expanded, and improved Second Edition of the are my responsibility, and any errors, omissions, or misclassifications
Atlas of Stress-Strain Curves. Some of the overriding goals of this of alloys are mine. I thank Heather Lampman, the principal copy edi-
project have been to: tor, and the members of the ASM International production staff, who
have worked diligently to keep any errors to a minimum. However, in
● Add curves for materials that are especially useful to key industries, any endeavor of this scope, there will be mistakes. Corrections, com-
including aerospace, automotive, and heavy manufacturing ments, and criticisms are invited.
● Seek out curves with a “pedigree” so readers can trace the source of It should be noted that most of the data included in this book are
the information and have some indication regarding its reliability not specified as being minimum, typical, or having any defined confi-
● Include as much pertinent information as possible for each curve. dence level associated with them. The reader may want to refer to the
Factors such as heat-treat condition, product form, thickness, spec- source of a particular curve to find additional details. The
imen size, orientation, history, testing temperature, and testing rate “Introduction” in this book provides a review of the information that
all affect materials performance and may be helpful when inter- can be extracted from stress-strain curves, a clarification of terms used
preting the curves in describing mechanical behavior, and a guide to the limitations of the
● Normalize the presentation of the curves to facilitate comparisons accuracy and precision of the information given.
among different materials
Charles Moosbrugger
We feel ASM International has been reasonably successful in Technical Editor
achieving these objectives in this edition. ASM International

iv
 ASM International is the society for materials
engineers and scientists, a worldwide network
dedicated to advancing industry, technology, and
applications of metals and materials.

ASM International, Materials Park, Ohio, USA

www.asminternational.org
This publication is copyright © ASM International®. All rights reserved.
Publication title Product code
Atlas of Stress-Strain Curves 06825G

To order products from ASM International:

Online Visit www.asminternational.org/bookstore

Telephone 1-800-336-5152 (US) or 1-440-338-5151 (Outside US)

Fax 1-440-338-4634
Customer Service, ASM International
Mail
9639 Kinsman Rd, Materials Park, Ohio 44073-0002, USA
Email CustomerService@asminternational.org
American Technical Publishers Ltd.
27-29 Knowl Piece, Wilbury Way, Hitchin Hertfordshire SG4 0SX,
In Europe United Kingdom
Telephone: 01462 437933 (account holders), 01462 431525 (credit card)
www.ameritech.co.uk
Neutrino Inc.
In Japan Takahashi Bldg., 44-3 Fuda 1-chome, Chofu-Shi, Tokyo 182 Japan
Telephone: 81 (0) 424 84 5550

Terms of Use. This publication is being made available in PDF format as a benefit to members and
customers of ASM International. You may download and print a copy of this publication for your
personal use only. Other use and distribution is prohibited without the express written permission of
ASM International.
No warranties, express or implied, including, without limitation, warranties of merchantability or
fitness for a particular purpose, are given in connection with this publication. Although this
information is believed to be accurate by ASM, ASM cannot guarantee that favorable results will be
obtained from the use of this publication alone. This publication is intended for use by persons having
technical skill, at their sole discretion and risk. Since the conditions of product or material use are
outside of ASM's control, ASM assumes no liability or obligation in connection with any use of this
information. As with any material, evaluation of the material under end-use conditions prior to
specification is essential. Therefore, specific testing under actual conditions is recommended.
Nothing contained in this publication shall be construed as a grant of any right of manufacture, sale,
use, or reproduction, in connection with any method, process, apparatus, product, composition, or
system, whether or not covered by letters patent, copyright, or trademark, and nothing contained in this
publication shall be construed as a defense against any alleged infringement of letters patent,
copyright, or trademark, or as a defense against liability for such infringement.