FOCAS Library
FOCAS Library
FOCAS Library
FOCAS Library
FOCAS is required to control a CNC remotely from a PC. The FOCAS library provides all required functions to develop MS Windows
applications, which can communicate with FANUC CNC via Ethernet or HSSB.
Main Features
Reading/writing data related to controlled axes/spindle
Operations related to CNC program
Reading/writing CNC file data
Reading/writing tool life management data
Reading history data
Reading servo/spindle data
Reading/writing data related to Data Server, DNC1, DNC2, OSI-Ethernet (HSSB version only)
Reading/writing waveform diagnosis data
Reading/writing data related to PUNCH PRESS CNC
Reading/writing data related to LASER CNC
Reading/writing data related to servo learning data (HSSB version only)
Reading/writing of other data (diagnostic data, alarm information, operator messages,etc.)
Reading/writing data related to PMC
Reading/writing data related to PROFIBUS-DP
For details of each function, please refer to the contents of FOCAS specification.
Technical data is subject to change without further notice. In case of doubt, the information given in the FANUC manuals or genuine manufacturers documentation shall prevail.
Reproduction in any form is prohibited. All rights reserved. FANUC
Page: 2 of 2
EUROPEAN HEADQUARTERS
FANUC FA Europe S.A.
Zone Industrielle
L-6468 Echternach
Tel.: (+352) 72 79 79 1
Fax.: (+352) 72 79 79 510
info@fanuc.eu
www.fanuc.eu
Technical data is subject to change without further notice. In case of doubt, the information given in the FANUC manuals or genuine manufacturers documentation shall prevail.
Reproduction in any form is prohibited. All rights reserved. FANUC