Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 131 views

    Whether You Need To Ream Casing To Bottom, or Rotate During Cementing, MLT Rings Enable Success

    Uploaded by

    Sudish Bhat
    Volant MLT Rings

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Whether You Need To Ream Casing To Bottom, or Rotate During Cementing, MLT Rings Enable Success

    Uploaded by

    Sudish Bhat
    131 views4 pages
    Volant MLT Rings

    Original Title

    MLT Rings

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Volant MLT Rings

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    131 views4 pages

    Whether You Need To Ream Casing To Bottom, or Rotate During Cementing, MLT Rings Enable Success

    Uploaded by

    Sudish Bhat
    Volant MLT Rings

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    MLT Rings

    Whether you need to ream casing to bottom, or rotate


    during cementing, MLT Rings enable success.
    The Right Connection.
    When you’re looking for an increase in torque, short lead time and reasonable
    cost, MLT Rings in conjunction with API connections are the solution. Whether
    you need to ream casing to bottom, or rotate during cementing, MLT Rings
    enable success. They work in API connections ‘as-is’.

    Tubing
    Applications

    Casing
    Applications
    Problem. Solution.
    Problem Problem
    Where: Tubing Systems Where: Center Section of Coupling (J Section)
    What: Downhole progressing cavity pumps driven What: High velocity gas travelling up the tubing string
    by a shaft from the surface, apply a reverse torque to can erode the inside of the coupling at the J section.
    tubing connections tending to unscrew them. When
    this happens the well must be worked over. Solution
    Volant MLT Rings fill the J section, smooth the flow
    Solution stream and protect the coupling from erosion.
    Volant MLT Rings fit into standard API connections
    to increase torsion capacity, eliminating the need
    for additional downhole hardware. Preventing sand
    Problem
    accumulation in the coupling keeps threads clean and Where: Casing
    extends service life. What: Difficult casing runs often require rotation
    to overcome friction and work past downhole
    Problem obstructions. Casing rotation requires a top drive, a
    CRT and connections with adequate torsion capacity.
    Where: Tubing Running
    What: Tubing threads are often screwed together
    quickly in the high-paced world of well servicing. As
    Solution
    a result, the connection is often over torqued and the Volant MLT Rings convert tapered threaded
    pin advances into the box further each time the tubing connections with modest torsion capacity, to tapered
    string is run into the hole. When the connection threads threaded shouldering connections with superior
    are sufficiently deformed, the pins must be recut. This torsion capacity.
    is an expense many operators tolerate, but it doesn’t
    need to be that way. Problem
    Where: Casing
    Solution What: Casing threads loaded in compression can
    Volant MLT Rings provide a positive shoulder that stops ‘jump in’, which compromises both the structural
    makeup at the correct position time after time. The ring capacity and the sealability of the connection.
    is resistant to over torque and therefore extends the life
    of the tubing connection. Solution
    Volant MLT Rings fill the gap between the pin tips,
    providing a direct compressive load path to protect
    threads from overload.

    MLT Rings™ volantproducts.ca / volantoiltoolsUS.com


    Product Range
    Connection Pipe Sizes

    EUE 2.88 in (73.15 mm) to 4.5 in (114.3 mm)

    USS Buttress 4.5 in (114.3 mm)

    BTC 4.5 in (114.3 mm) to 20.0 in (508.0 mm)

    LTC 4.5 in (114.3 mm) to 9.63 in (244.6 mm)

    STC On request

    Please contact Volant for full details.

    Give us a problem.
    Or just drop us a line if you want to learn more.
    +1 866.8VOLANT / +1 866.886.5268 Volant Oil Tools (US) Inc.
    +1 780.784.7099 +1 480.696.2436
    sales@volantproducts.ca sales@volantoiltoolsUS.com
    volantproducts.ca volantoiltoolsUS.com Printed in Canada APRIL 2014

    You might also like