Me VR10 PDF

VR10
DEPARTMENT OF MECHANICAL ENGINEERING

SCHEME OF INSTRUCTION AND EXAMINATION
with effect from 2010 – 2011
I / IV B.TECH. :: First SEMESTER
Periods per week Maximum Marks

Lab/ Total
Code No. Subject Lect Tutoria Credits
Internal External Marks
ure l Practice
FY 1001 Engineering Mathematics – I 4 1 - 4 30 70 100
FY 1002 P Engineering Physics 3 1 - 3 30 70 100

Technical English &
FY 1003 E 2 - 2 3 30 70 100
Communication skills
FY 1004 EM Engineering Mechanics-I 4 1 - 4 30 70 100
FY 1005 Introduction to Computing 2 - - 2 30 70 100
FY 1006 G Engineering Graphics 2 - 6 5 30 70 100
FY 1051 P Engineering Physics Lab - - 3 2 25 50 75
FY 1052 Basic Computing Lab - - 3 2 25 50 75
Total 17 3 14 25 230 520 750
I / IV B.TECH. :: Second SEMESTER

Lab/ Total
Code No. Subject Lec Credits
ture
Tutorial Internal External Marks
Practice
Engineering Mathematics –
FY 2001 4 1 - 4 30 70 100
II
FY 2002 C Engineering Chemistry 3 1 - 3 30 70 100
Basics of Civil & Mech.
FY 2003 B 4 - - 4 30 70 100
Engg.
FY 2004 EM Engineering Mechanics-II 3 1 - 3 30 70 100
FY 2005 Programming in C 3 1 - 3 30 70 100
FY 2006 PE Professional Ethics 2 - - 2 30 70 100
FY 2051 C Chemistry Lab - - 3 2 25 50 75
FY 2052 C Programming Lab 3 2 25 50 75
FY 2053W Basic Workshop - - 3 2 25 50 75
Total 19 4 9 25 255 570 825
DEPARTMENT OF MECHANICAL ENGINEERING, V.R SIDDHARTHA ENGINEERING COLLEGE 1

VR10

II / IV B.TECH. (Mech) :: Third SEMESTER
Lab/ Total
Code No. Subject Lect Credits
ure Practice
Engineering Mathematics
ME 3001 4 1 - 4 30 70 100
– III
ME 3002 Mechanics of Materials 4 1 - 4 30 70 100
ME 3003 Kinematics of Machines 4 1 - 4 30 70 100
ME 3004 Basic Thermodynamics 4 1 - 4 30 70 100
ME 3005 Manufacturing Processes 3 1 - 3 30 70 100
ME 3006 Environmental Science 3 - - 3 30 70 100
Computer Aided Drafting

ME 3051 - - 3 2 25 50 75
Lab
ME 3052 Work shop Practice - - 3 2 25 50 75
Total 22 5 6 26 230 520 750
II / IV B.TECH. (Mech) :: Fourth SEMESTER

Lab/ Total
ure Practice
Engineering Mathematics –
ME 4001 4 1 - 4 30 70 100
IV
Advanced Mechanics of
ME 4002 4 1 - 4 30 70 100
Materials
ME 4003 Applied Thermodynamics 4 1 - 4 30 70 100
ME 4004 Fluid Mechanics 4 1 - 4 30 70 100

Material Science &
ME 4005 4 - - 4 30 70 100
Metallurgy
Basic Electronics
ME 4006 3 - - 3 30 70 100
Engineering
ME 4051 S.M & F.M. Lab - - 3 2 25 50 75
ME 4052 Communication Skills Lab - - 2 1 25 50 75
Total 23 4 5 26 230 520 750

VR10

III / IV B.TECH. (Mech) :: Fifth SEMESTER

Lab/ Total
ure Practice
ME 5001 Hydraulic Machines 4 1 - 4 30 70 100

Design of Machine
ME 5002 4 1 - 4 30 70 100
Elements
ME 5003 Machine Dynamics 4 1 - 4 30 70 100
I.C. Engines and Gas
ME 5004 4 1 - 4 30 70 100
Turbines
Metal Cutting & Machine
ME 5005 3 1 - 3 30 70 100
Tools
ME 5006 Electrical Technology 3 - - 3 30 70 100
ME 5051 Geometrical Modeling Lab. - - 3 2 25 50 75

Electrical & Electronics
ME 5052 - - 3 2 25 50 75
Lab
Total 22 5 6 26 230 520 750
III / IV B.TECH. (Mech) :: Sixth SEMESTER

Lab/ Total
ure Practice
Advanced Manufacturing
ME 6001 3 1 - 3 30 70 100
Processes
Design of transmission
ME 6002 4 1 - 4 30 70 100
Elements
Engg. Economics &
ME 6003 4 - - 4 30 70 100
Management
ME 6004 Heat Transfer 4 1 - 4 30 70 100
Engineering Metrology &
ME 6005 4 - - 4 30 70 100
Measurements
ME 6051 Fuels & IC Engines Lab - - 3 2 25 50 75
ME 6052 Machine Tool lab - - 3 2 25 50 75
Computational Methods
ME 6053 - - 3 2 25 50 75
Lab
ME 6054 Term Paper - 1 - 1 25 50 75
Total 19 4 9 26 250 550 800

VR10

With Effect from 2010 – 2011
IV / IV B.TECH. (Mech):: Seventh SEMESTER

Lect Tutorial Lab/ Internal External Total
Code No. Subject Credits
ure Marks
Practice
ME 7001 Operations Research 3 1 - 3 30 70 100

Design of Automobile
ME 7002 4 1 - 4 30 70 100
Components
ME 7003 Finite Element Method 4 1 - 4 30 70 100
Manufacturing
ME 7004 3 1 - 3 30 70 100
Management
ME 7005 Elective – I 3 1 - 3 30 70 100
ME 7006 Elective – II 4 - - 4 30 70 100
ME 7051 Heat Transfer Lab - - 3 2 25 50 75
ME 7052 Design & Metrology Lab. - - 3 2 25 50 75
ME 7053 Mini Project - 1 - 1 25 50 75
Total 21 6 6 26 255 570 825
ELECTIVE – I:
ME 7005 / 1 : Mechatronics
ME 7005 / 2 : Automatic Control Engineering
ME 7005 / 3 : Hydraulic and Pneumatic Systems
ME 7005 / 4 : Optimization Techniques
ME 7005 / 5 : Industry need based elective
ELECTIVE – II:
ME 7006 / 1 : Energy Resources Utilization
ME 7006 / 2 : Refrigeration & Air Conditioning
ME 7006 / 3 : Computational Fluid Dynamics
ME 7006 / 4 : Gas Dynamics & Rocket Propulsion
ME 7006 / 5 : Open Elective

VR10

IV / IV B.TECH. (Mech):: Eighth SEMESTER

Lab/ Total
ure Practice
Computer Aided
ME 8001 4 - - 4 30 70 100
Manufacturing
ME 8002 Elective – III 4 - - 4 30 70 100
ME 8003 Elective – IV 4 - - 4 30 70 100
ME 8051 CAD & CAM Lab. - - 3 2 25 50 75
ME 8052 Project Work 2 6 10 12 50 100 150
Total 14 6 13 26 165 360 525
ELECTIVE – III:
ME 8002 / 1 : Computer Aided Design
ME 8002 / 2 : Automobile Engineering
ME 8002 / 3 : Experimental Stress Analysis
ME 8002 / 4 : Mechanics of Composite Materials
ME 8002 / 5 : Industry need based elective
ELECTIVE – IV:
ME 8003 /1 : Robotics
ME 8003 / 2 : Flexible Manufacturing Systems & Group Technology
ME 8003 /3 : Machine Tool Design
ME 8003 /4 : Design for Manufacturing & Assembly
ME 8003/ 5 : Energy Management

VR10
FY 1001
ENGINEERING MATHEMATICS – I
Lecture : 4 hrs/ week Internal Assessment: 30 Marks

Tutorial : 1 hr/ week Semester End Examination: 70 Marks
Practical : - Credits: 4
Objectives: Evaluate rank of a matrix, Eigen values and Eigen vectors and inverse of a
matrix by Cayley-Hamilton theorem.
Identify the nature of quadratic form by orthogonal transformation
Discuss the convergence and divergence of infinite series using ratio tests,
roots tests and Leibnitz’s test
Formation of ordinary Differential Equations and resolve linear differential
equations and apply them to Newton’s law of cooling.
Realize dependence of solutions to equations reducible to linear differential
equations, simultaneous Differential Equations with constant coefficients..
Formation and solution of partial differential equations of first order
Learning At the end of the course the students will be able to

Outcomes:
Understand the nature of solutions of system of linear equations(a,b,e)
Apply Gauss-Jordan method, Caley-Hamilton theorem to find inverse of a
matrix and Eigen vectors to find canonical form of a quadratic form(a,b,e)
Analyze the nature of an infinite series. (a,b,e)
Solve the first order and higher order linear differential equations and apply
these methods to solve applied problems. (a,b,e)
Understand the formation of partial differential equations and solve them.
(a,b,e)
Prerequisites:- This course assumes the knowledge of mathematics at 10+2 level

UNIT – I
Matrices: Rank of a matrix, Elementary transformations, Echelon-form of a matrix, normal form
of a matrix, Inverse of a matrix by elementary transformations (Gauss – Jordan method). Solution
of system of linear equations: Non homogeneous linear equations and homogeneous linear
equations. Linear dependence and linear independence of vectors.
Characteristic equation – Eigen values – Eigen vectors – properties of Eigen values. Cayley-
Hamilton theorem (without proof). Inverse of a matrix by using Cayley-Hamilton theorem.
UNIT – II
Reduction to diagonal form – Modal matrix orthogonal transformation. Reduction of quadratic
form to canonical form by orthogonal transformations. Nature of a quadratic form – Hermitian
and skew-Hermitian matrices.
Sequences and series: Convergence of series – comparison test – D’Alemberts Ratio test –
Cauchy’s Root Test – Alternating series – Absolute convergence – Leibnitz’s Rule.

VR10
UNIT – III
Ordinary differential equations – Formation – separable equations – exact equations –
integrating factors – linear first order differential equations – Bernoulli’s equation - orthogonal
trajectories. Newtons Law of Cooling, Heat Flow - Linear equations of higher order with constant
coefficients.
UNIT – IV
Linear dependence of solutions, method of variation of parameters – equations reducible to linear
equations – Cauchy’s homogeneous linear equation – Legendre’s linear equation simultaneous
linear equations with constant coefficients.
Partial Differential Equations: Formation of Partial Differential Equations, Solutions of a Partial
Differential Equation – Equations solvable by direct integration – Linear Equation of First order.
Learning Resources:
Text Books:
1. A text book of Higher Engineering Mathematics by Dr.B.S.Grewal, 40th Edition, 2007,
Khanna Publishers.
Reference Books:
1. Advanced Engineering Mathematics by Krezig., 8th Edition, 2007, John Wiley & Sons
2. Advanced Engineering Mathematics by Peter.V.O.Neil, Thomson, Canada, 7th Edition,
2011 Hardcover
3. Advanced Engineering Mathematics by R.K.Jain and S.R.K.Iyengar, 3rd Edition -
Reprint, 2012, Narosa Publishers.
4. A Text book of Engineering Mathematics by N.P.Bali, Manish Goyal, 1st Edition, 2011
Laxmi Publications (P) Limited.
5. A text book of mathematics by B.V.Ramana, 6th reprint, 2008,Tata MC Graw Hill.

VR10
FY 1002P
ENGINEERING PHYSICS
Objectives: Impart the knowledge of electricity and electromagnetism to various

engineering applications.
Study the wave particle dualism, matter waves and learn concepts of
semiconductors, superconductors and opto-electronic devices.
Understand the basic principle and working of different types of lasers and
optical fibers.
Study nano materials, carbon nano tubes and their properties and
applications

Outcomes:
Analyse and understand the basics of electricity and how these basic ideas are
used to enhance our current prosperity. (a,b,c,k)
Understand the differences between classical and quantum mechanics and
learn about semiconductor technology. (a,c,e)
Analyse and learn about how materials behave at low temperature, causes for
their behaviour and applications. (a,b,c)
Analyse and understand various types of lasers and optical fibers and their
applications. (a,b,c)
Understand the fabrication of nanomaterials, carbon nanotubes and their
applications in various fields. (a,h)
Prerequisites: --------
UNIT – I
Electricity, Electromagnetism and Semiconductors: Gauss law in electricity (Statement and
proof) and it’s applications: Coulomb’s law from Gauss law, spherically distributed charge, Hall
effect, Biot-Savart’s law: B due to a current carrying wire and a circular loop, Faraday’s law of
induction, Lenz’s law, Induced electric fields, Gauss’ law for magnetism, Maxwell equations (
Qualitative treatment), Electromagnetic oscillations in LC circuit (quantitative), A.C. circuit
containing series LCR circuit (Resonance condition).
Semiconductors: Carrier transport, Carrier drift, Carrier diffusion, generation and recombination
process (qualitative), classification of materials based on energy diagram.
UNIT - II
Modern Physics: Dual nature of light, Matter waves and Debroglie’s hypothesis, Davisson &
Germer experiment, Heisenberg’s uncertainty principle and its application ( Non existence of
electron in nucleus, Finite width of spectral lines), Classical and quantum aspects of particle. One
dimensional time independent Schrodinger’s wave equation, physical significance of wave function,
Particle in a box (One dimension).
Optoelectronic Devices: LED, LCD, Photo emission, Photo diode, Photo transistor and Solar
cell and its applications.

VR10
UNIT – III
Superconductors and Advanced Physics:
Superconductivity: Introduction, Critical parameters, Flux quantization, Meissner effect, Types of
Superconductors, BCS theory, Cooper pairs, London’s equation-penetration depth, high
temperature super conductors, Applications of superconductors.
Advanced physics: Lasers: Spontaneous emission, stimulated emission, population inversion,
Solid state (Ruby) laser, Gas (He – Ne) laser, Semiconductor (Ga As) laser, Applications of lasers,
applications of Infrared radiation.
Fiber optics: Propagation of light through optical fiber, types of optical fibers, Numerical aperture,
Fiber optics in communications and its advantages.
UNIT - IV
Nanotechnology: Introduction, Physical & Chemical properties. Fabrication: AFM, SEM, TEM,
STM, MRFM. Production of nanoparticles: Plasma Arcing, Sol-gel, Chemical vapour deposition.
Carbon nanotubes: SWNT, MWNT. Formation of carbon nanotubes: Arc discharge, Laser
ablation; Properties of carbon nanotubes, Applications of CNT’s & Nanotechnology.
Learning Resources:
Text Books:
1. Physics Part-II-Halliday and Resnick, 5th Edition,2001 John wiley and sons.Inc
2. Engineering Physics – Gaur and Gupta, 8th Edition, 2008, Dhanapatrai publishers.
Reference Books:
1. Solid State Physics – S.O.Pillai, 6th Edition, 2005, New age International Limited.
2. Engineering Physics – M.Armugam, 2nd Edition, 2003, Anuradha publishers.
3. Modern engineering physics – A.S.Vasudeva, 2nd Edition, 2003, S.Chand publications
4. Engineering Physics – P.K. Palanisamy, 2nd Edition, 2010, Scitech publications.

VR10
FY 1003E
TECHNICAL ENGLISH AND COMMUNICATION SKILLS

Tutorial : - Semester End Examination: 70 Marks
Practical : 2 hrs/ week Credits: 3
Objectives: Make the learners aware of the elements of functional English in order to
make them authentic users of language in any given academic and/or
professional situation
Develop proficiency in academic presentations
Expose real carrier oriented environment.
Develop felicity of expression and familiarity with technology enabled
communication
Expose to corporate to adequate etiquette and rhetoric.

Outcomes:
Be aware of the elements of functional English in order to make them
authentic users of language in any given academic and/or professional
situation. (a,g)
Be proficient in making academic presentations (d)
Be exposed to the real-time career oriented environment(h)
communication (i)
Be exposed to the corporate etiquette and rhetoric (f,j)
UNIT – I
written communication skills
This area exposes the learners to the basic tenets of writing; the style and format of
different tools of written communication
(I) Description (through Paragraph Writing)
(II) Reflection (through Essay Writing)
(III) Persuasion (through indented Letter Writing)
UNIT – II
Reading Comprehension:
This area exposes the learners to the techniques of deciphering and analyzing longer texts
pertaining to various disciplines of study.
(I) Types of Reading
(II) Sub skills of Reading
(III) Eye span – fixation
(IV) Reading Aloud & Silent Reading
(V) Vocalization & Sub-vocalization.

VR10
UNIT – III
A) Vocabulary and Functional English:
This area attempts at making the learners withstand the competition at the transnational
technical environment so as to enable them to undertake various professional operations.
(I) Vocabulary – a basic word list of one thousand words.
(II) Functional grammar, with special focus on Common Errors in English.
(III) Idioms & Phrasal verbs.
B) Listening and Speaking:
This area exposes the learners to the standard expressions including stress, rhythm and
various aspects of isolated elements and connected speech.
(I) The use of diphthongs
(II) Elements of spoken expression
(III) Varieties of English
(IV) Towards accent neutralization
UNIT – IV
Technical Communication Skills:
This area falls under English for Specific Purposes (ESP) which trains the learner in Basic
Technical Communication.
(I) Technical Report Writing (Informational, Analytical & Special reports)
(II) Technical Vocabulary
Learning Resources:
1. Use of English – Randolph Quirk, Longman, 2nd Edition, 2004.

2. Practical English Grammar– Thomson A.J & Martinet A.V, Oxford University Press,4th Edition,
2001
3. Common Errors in English – Thomas Eliot Berry, 1st Edition, TMH, 2001.
4. Structural Patterns & Usage in English – B.S.Sarma, Poosha Series, 4th edition, 2007.
5. College Writing Skills - John Langan, 8th Edition, McGraw Hill, 2004.
6. English for Academic and Technical Purposes – Sellinkar, Larry et. al., Newbury
House Publishers, 1st Edition, 1981.
7. Oxford guide to Plain English – Martin Cutts, Oxford University Press, 3rd Edition, 2004.
8. Phonetics and spoken English – V.Sethi and P.V. Dhamija, Orient Longman, 2nd Edition 2004.
9. Technical Communication- Principles and Practice- Meenakshi Raman& Sangeet Sharma,
Oxford University Press, 1st Edition 2009.

VR10
FY 1004 EM
ENGINEERING MECHANICS – I
Tutorial : 1 Hr/week Semester End Examination: 70 Marks
Objectives: To develop an understanding of the principles of statics and the ability to

analyze problems using static equilibrium equations.
To introduce the basic principles of mechanics applicable to rigid bodies in
equilibrium.
To develop the fundamentals of engineering mechanics and problem solving
skills essential for mechanical engineering

Outcomes:
Construct free body diagrams and develop appropriate equilibrium equations.
(a,e)
Simplify the system of forces and moments to equivalent systems. (a,e)
Determine the axial forces in the members of determinate truss. (a,e)
Analyze systems with friction. (e)
Determine centroids and determine moment of inertia for composite areas. (a)
Develop the equilibrium conditions in terms of virtual work. (e)
Prerequisites: Basic Mathematics & Physical Science
UNIT – I
Concurrent Forces in a Plane:
Principles of statics, Force, Addition of two forces: Parallelogram Law – Composition and resolution of
forces – Constraint, Action and Reaction. Types of supports and support reactions. Free body diagram.
Equilibrium of concurrent forces in a plane – Method of projections –Moment of a force, Theorem of
Varignon, Method of moments.
UNIT –II
Parallel Forces in a Plane:
Introduction, Types of parallel forces, Resultant. Couple, Resolution of Force into force and a couple.
General case of parallel forces in a plane.
Centroids:
Introduction, Determination of centroids by integration method, Centroids of composite plane figures.
UNIT – III
Moment of Inertia of Plane Figures: Moment of Inertia of a plane figure with respect to an axis in its
plane – Moment of inertia with respect to an axis perpendicular to the plane of the figure – Parallel axis
theorem
General Case of Forces in a Plane:
Composition of forces in a plane – Equilibrium of forces in a plane -Plane Trusses: Method of joints

VR10
UNIT – IV
Friction: Introduction, Classification of friction, Laws of dry friction. Co-efficient of friction, Angle of
friction, Angle of repose, Cone of friction, Frictional forces on wheel, Wedge friction.
Principle Of Virtual Work:
Equilibrium of ideal systems.
Learning Resources:
Textbooks:
1. Engineering Mechanics by S.Timoshenko & D.H.Young, 4th Edition, 2007, McGraw Hill
International Edition. (For Concepts and symbolic Problems).
2. Engineering Mechanics Statics and dynamics by A.K.Tayal, 13th Edition, 2006 Umesh
Publication, Delhi, (For numerical Problems using S.I.System of Units).
Reference Books:
1. Vector Mechanics for Engineers Statics and Dynamics by Beer and Johnston,3rd SI Metric
Edition,Reprint 2010, Tata McGraw Hill Publishing Company, New Delhi.
2. Engineering Mechanics by SS Bhavikatti and KG Rajasekharappa, 4th Edition, 2012, New
age international, Private limited.
3. Singer’s Engineering Mechanics Statics and Dynamics by K.Vijaya Kumar Reddy
and J Suresh Kumar ,3rd Edition, 2010, SI Units-BS Publications.
Web References:
1. http://openlibrary.org/books/OL22136590M/Basic_engineering_mechanics
2. http://en.wikibooks.org/wiki/Engineering_Mechanics
3. http://nptel.iitm.ac.in/video.php?courseId=1048
4. http://imechanica.org/node/1551
5. http://emweb.unl.edu/
6. http://ebooks-freedownload.com/2009/11/engineering-mechanics-statics-12.html
7. http://www.ebookee.com/Engineering-Mechanics-Statics_37859.html

VR10
FY 1005
INTRODUCTION TO COMPUTING

Objectives: Understand the basic parts of a computer system and their relationships.
Understand and use basic computer terminology to equip the graduates with
a broad foundation of basic engineering concepts and fundamentals of
Computer Engineering.
To develop in graduates the capability to apply these learned concepts in
engineering design and to implement such a career as a practicing engineer.
Use a computer system for interactive communications.

Outcomes:
Identify the basic components of the computer and working of each device.
(a)
Understand the representation of data in a computer. (a)
Find the difference between Assembly and High level programming
Languages. (a)
Develop Algorithms and Flowcharts(a,b)
Understand the functions of Operating System. (a)
Analyze the fundamentals of Computer Networking. (a)
UNIT I:
Introduction:
Algorithms, Simple model of a computer, Characteristics of a computer, Problem solving using
computers.
Data Representation: Representation of characters in computer, representation of Integers,
fractions, number systems, binary system, octal system, hexadecimal system, organizing of
memories, representation of numbers, alpha numeric characters, error detection codes.
Computer Generation and Classification: Computer generations, Classifications of computers.
UNIT II:
Computer Architecture:
Interconnection of units, Input Units: Keyboard, VDU, OMR, MICR, OCR and BAR Coding.
Output Units: Types of Printers, Plotters,
Computer memory: Memory cell, Organization, Read-Only-Memory,Magnetic Hard Disk,
CDROM.
UNIT III:
Computer Languages:
Why programming Language, Assembly language, Higher Level Programming Languages,
Compiling High Level Languages.

VR10
Algorithm and Flowcharting:

Introductory programming techniques, Algorithms, Structure of Algorithms, Types of Algorithms,
Structure of a Flowchart, Terminal Symbol Off page connector symbol, Modification Symbol,
Group instruction symbol, Connection symbol, Drawing efficient flowcharts.
UNIT – IV
Introduction to operating system, functions of operating system, basic introduction to DOS,
LINUX, WINDOWS –XP.
Definition and Applications of Computer Network, LAN, MAN and WAN, Intranet, Internet.
Learning Resources:
Text Book:
1. Fundamentals of Computers V. Rajaraman 4 th Edition, 2007, PHI.
Reference Books:
1. Introduction to Computer Science; S. Govindaraju, M. Chandrasekaran,
A. Abdul Haq, T. R. Narayanan, 1St Edition,1996, Newage International Limited.
2. Computer Fundamentals by PK Sinha, 4th Edition, 2004, BPB Publications, New Delhi.

VR10
FY 1006G
ENGINEERING GRAPHICS

Objectives: To visualize and communicate geometrical elements

To understand the fundamentals of geometry like engineering curves, planes,
solids, sections, developments & isometric views and its applications in design
and manufacturing of various engineering components.

Outcomes:
Represent various conics and curves. (a,c,g)
Construct plain and diagonal scales. (a,c,g)
Draw Orthographic projections of Lines, Planes, and Solids. (a,c,g)
Construct isometric scale, isometric projections and views. And also convert
pictorial views to orthographic projections. (a,c,g)
Draw Sectional views of Solids. (a,c,g)
Understand Development of surfaces and their representation. (a,c,g)
UNIT – I
General: Use of Drawing instruments, Lettering - Single stroke letters, Dimensioning, Representation
of various type lines - Geometrical Constructions.
Scales: Construction and use of plain and diagonal scales.
Conic Sections: conic sections - general construction method for ellipse, parabola and hyperbola.
Special methods for conic sections.
Curves: Curves used in Engineering practice - Cycloidal curves - Cycloid, Epicycloid and
Hypocycloid; Involute of circle.
UNIT – II
Method of Projections: Principles of projection - First angle projection and third angle projection of
points and straight lines.
Projection of Planes : Projections of planes of regular geometrical lamina.
UNIT – III
Projections of Solids: Projections of simple solids such as Cubes, Prisms, Pyramids, Cylinders and
Cones with varying positions.
Sections of Solids: Sections of solids such as Cubes, Prisms, Pyramids, Cylinders and Cones. true
shapes of sections. (Limited to the Section Planes perpendicular to one of the Principal Planes).
UNIT – IV
Development of Surfaces: Lateral development of cut sections of Cubes, Prisms, Pyramids,
Cylinders and Cones.
Isometric Projections: Isometric Projection and conversion of Orthographic Projections into
isometric views. (Treatment is limited to simple objects only). Introduction to Isometric Projections
to Orthographic Projections.
VR10
Learning Resources:
Text Book:
1. Elementary Engineering Drawing by N.D. Bhatt & V.M. Panchal. Charotar Publishing House,
Anand. 49th Edition – 2006.
Reference Books:
1. Text Book on Engineering Drawing by Prof. K. L. Narayana & Prof. P. Kannaiah.
Scitech publications(India) Pvt. Ltd., Chennai 2nd Edition – fifth reprint 2006.
Website:
1. http://www.youtube.com/watch?v=XCWJ_XrkWco
2. http://www.me.umn.edu/courses/me2011/handouts/drawing/blanco-
tutorial.html#isodrawing
3. http://www.slideshare.net
4. http://edpstuff.blogspot.in

VR10
FY 1051P
ENGINEERING PHYSICS LABORATORY
Lecture : --- Internal Assessment: 25 Marks

Tutorial : --- Semester End Examination: 50 Marks
Practical : 3 hrs/week Credits: 2
Objectives: Identify resonating length of A.C. mains in Sonometer experiment

Construct L.C.R. series circuit and justify resonance frequency
Explain magnetic field along the axis of circular coil carrying current with
respect to distance.
Discuss oscillations using torsional and compound pendulums
Determine Numerical Aperture and study Hall Effect

Outcomes:
Elucidate the concepts of physics through involvement in the experiment by
applying theoretical knowledge (a,b,c)
Illustrate the basics of electro magnetism, optics, mechanics, semi-conductors
& quantum theory. (a,b,c,k)
Develop an ability to apply the knowledge of physics experiments in the later
studies (a,b,c)
Minimum of 8 Experiments to be Completed out of the following

1. AC Sonometer – Verification of Laws
2. Sensitive Galvonometer –Figure of merit
3. Photo tube-study o f V-I Characteristics,determination of work function
4. Torsional Pendulum-Rigidity modulus calculation
5. Variation of magnetic field along the axis of current-carrying circular coil
6. Fibre Optics-Numerical aperture calculation
7. Compound pendulum-Measurement of ’g’
8. Solar cell – Determination of Fill Factor
9. Losses in Optical Fibres
10. LCR circuit-Resonance
11. Newton’s Rings-Radius of curvature of plano convex lens
12. Hall effect- Study of B & I Variation
13. Photovoltaic cell-Energy gap
14. Measurement of thickness of a foil using wedge method
15. Diffraction grating-Measurement of wavelength
Learning Resources:
1. A text book of practical physics by Indu Prakash & Rama Krishna, vol.1, 25th Edition 2003,
Kitab Mahal publishers Allahabad.
2. University practical physics by J.C. Mohanty, D.K. Mishra, 1st Edition 1990, Kalyani
publishers, Delhi.
3. A laboratory manual of Physics by D P Khandelwal, 1st Edition 1991, vani educational books,
Delhi.
4. Laboratory manual of engineering Physics by Dr. Y.Aparna, Dr. K. Venkateswara Rao, 1st
Edition 2010, VGS Publications,Vijayawada.

VR10
FY 1052
BASIC COMPUTING LABORATORY
Lecture : -- Internal Assessment: 25 Marks

Objectives: To learn productivity tools like word, power point etc…

To attain knowledge on PC hardware and software
To attain knowledge on world wide web

Outcomes:
Apply MS Office tools (a)
Understand installation & uninstallation of application and System software.
(a)
Attain basic knowledge on hardware (I/O devices, Mother board, processor
etc...) (a)
List of programs
1. Execution of Simple DOS Commands COPY, REN, DIR, TYPE, CD, MD,
BACKUP
2. Create your Bio-Data in MSWord giving Educational and Personal Details.
3. Create an Excel Worksheet entering marks in 6 subjects of 10 Students. Give ranks
on the basis of Total marks and also generate graphs.
4. Create a Database in MS-Access for Storing Library Information.
Ex Fields: Book name, author, book code, subject, rack no, price, volumes Enter Sample
data of 15 books in to database.
5 Design a PowerPoint presentation with not less than 10 slides on any of your
interesting topic.
Ex: Literacy, Freedom Struggle, Siddhartha Engineering College, Evolution of
Computers, Internet etc.
6. Register for new Email address with any free Email provider and send
Email using Internet to your friends, parents, teachers etc.
7. Search Internet using Search Engines like Google.com, Yahoo.com and
ask.com for files, pictures, power point presentations etc. Downloading files,
EBooks, EContent from Internet.
8 Practice in installing a Computer System by giving connection and loading System
Software and Application Software.
9. Accessing and Changing BIOS settings.
10 Installing Windows XP operating System.
11 Assembling of PC.
12 Disassembling of PC.

VR10
Learning Resources:
Text Books :
1. Introduction to Computers with MSOffice, Alexis Leon and Mathews Leon TATA
McGraw HILL, 2001
2. Internet for Every One by Alexis Leon and Mathews Leon; Vikas Publishing House
Pvt. Ltd., Jungpura, New Delhi,2008
3. Familiarity With the computer, Software, Internet and their uses.
Reference Books:
1. Computers Today by SK Basandra,1st 2010,Galgotia Publication Pvt. Ltd., New Delhi.
2. Fundamentals of Information Technology by Leon and Leon, 2nd edition 1999, Vikas
Publishing House Pvt. Ltd., Jungpura, New Delhi.
3. Surviving in an E-World, Anushka Wirasinha, Prentice Hall of India Pvt. Ltd., New
Delhi

VR10
FY 2001
ENGINEERING MATHEMATICS – II

Objectives: Define limit, continuity and differentiability

State and apply Rolle’s, Lagrange’s theorems and Taylor series
Realize maxima and minima functions by Lagrange’s multipliers.
Define and solve radius of curvature and Centre of curvature.
Explain and solve double & triple integrals using change of order (both in
Cartesian and polar coordinates)
Define scalar and vector fields with its applications to differentiation and
integration.
Introduce the concepts of interpolation, finite differences and apply them to
various interpolation formulae.

Outcomes:
Understand Mathematical concepts of limit, continuity, derivability and
apply them for Taylor’s series expansion of functions, curvature and
extremum of functions. (a,b,e)
Acquire knowledge of double and triple integrals in evaluation of area,
volumes of plane and solid regions. (a,b,e)
Familier with principle application of vector functions. (a,b,e)
Understand concept of interpolation and apply it to construct a new
function. (a,b,e)
Prerequisites: Engineering Mathematics – I, 10+2 level

UNIT – I
Differential Calculus: Limit, continuity, differentiability – Rolle’s Theorem – Lagrange’s Mean
Value Theorem – Taylor’s Series (without proof) – Maxima and Minima of functions of two
variables – Lagrange’s multipliers – Curvature – radius of curvature – Centre of curvature.
UNIT – II
Integral Calculus: Double integrals – Evaluation in Cartesian and Polar coordinates – Changing
the order of integration – Evaluation of areas using double integrals – Evaluation of triple integrals
– Evaluation of volume using triple integrals, change of variables.
UNIT – III
Vector Calculus: Scalar and Vector fields – Differentiation of scalar and vector point functions –
gradient of Scalar fields – directional derivatives – divergence and curl of vector fields – vector
identities
Line and surface integrals – Green’s theorem in a plane (without proof) – Gauss’ divergence
theorem (without proof) – Stoke’s theorem (without proof).

VR10
UNIT – IV
Interpolation: Introduction, Finite Differences – Forward, Backward, Central Differences,
Symbolic Relations, Differences of a polynomial, Newton’s formula for interpolation, Central
difference interpolation formulae –Gauss’s, Stirling’s, Bessel’s formulae Interpolation with unequal
intervals – Lagrange’s and Newton’s Interpolation formulae.
Learning Resources:
Text Books:
1. A text book of Higher Engineering Mathematics by Dr.B.S.Grewal, 40th Edition. 2007,
Khanna Publishers
Reference Books:
1. Advanced Engineering Mathematics by Krezig., 8th Edition, 2007, John Wiley & Sons
2. Advanced Engineering Mathematics by Peter.V.O.Neil, Thomson, 7th Edition 2011
Canada,
3. Advanced Engineering Mathematics by R.K.Jain and S.R.K.Iyengar, 3rd Edition -
Reprint 2012, Narosa Publishers.
4. A Text book o Engineering Mathematics by N.P.Bali, Manish Goyal, 1st Edition 2011
Laxmi Publications(P) Limited.
5. A text book of mathematics by B.V.Ramana, Tata Mc Graw Hill.2003

VR10
FY 2002C
ENGINEERING CHEMISTRY

Objectives: To introduce basic chemistry principles applied in engineering and to

familiarize the students with dependency of life and maintenance of various
constructions and equipment on quality of water.
To explore the mechanistic aspects of conducting polymers in view of their
applications in various fields like electronics, electrical, sophisticated
instruments, microchips, etc.
To impart knowledge of inter-conversion of chemical and electrical energies
for the development of better electrochemical energy systems that is useful
in all the engineering fields.
To make students understand the mechanistic aspects of corrosion processes
which strongly effect the performance of all the major metallic structures
and devices used in various technologies.
To develop analytical skills in engineering students which are essential for
any engineering student to understand and resolve various challenges in their
fields.

Outcomes:
Analyze various water treatment methods, boiler troubles and understand
conduction mechanism in conducting polymers. (b)
Understand construction and the working principle of different electrodes
batteries/ sensors and their applicability. (a)
Identify and Evaluate different factors influencing corrosion and protection
methods. (e)
Apply the principles of ultraviolet and infrared spectroscopy, instrumental
mechanisms of spectrophotometers and applications of these techniques in
chemical analysis. (k)
UNIT - I
Water technology: Water treatment for drinking purpose - sedimentation, coagulation, filtration,
various methods of disinfection and concept of break-point chlorination.
Boiler troubles: scales, sludges, caustic embrittlement and boiler corrosion – causes and prevention.
Desalination of brakish water: Principle and process of electrodialysis and reverse osmosis,
Polymer technology: Conducting polymers – Examples, classification-intrinsically conducting
polymers and extrinsically conducting polymers- mechanism of conduction of undoped, p-doped
and n-doped polyacetylenes – applications of conducting polymers – structure, importance and
applications of polyaniline.

VR10
UNIT - II
Electrochemistry and Electrochemical energy systems
Reference electrodes: Calomel electrode, silver-silver chloride electrode, quinhydrone electrode
and glass electrode, determination of pH using glass electrode, concept of concentration cells.
Conductivity – Conductometric titrations and Potentiometric titrations.
Electrochemical energy systems: Types of electrochemical energy systems – Storage cells –Zinc-
air battery, Ni-Cd battery, Lithium batteries – Li/MnO2, Li/SOCl2, Li/TiS2 and LixC/LiCoO2 –
Advantages of lithium batteries – Electrochemical sensors – Principle, working and applications –
Simple introduction to the terms – polarization, decomposition potential and overvoltage.
UNIT – III
Corrosion and its control
Introduction – chemical and electrochemical corrosion – electrochemical theory of corrosion –
corrosion due to dissimilar metals, galvanic series – differential aeration corrosion – concept of
passivity.
Forms of corrosion –pitting, crevice, stress corrosion cracking and microbiological corrosion.
Factors affecting corrosion: Relative anodic and cathodic areas, nature of corrosion product,
concentration of D.O., pH and temperature.
Protection methods: Cathodic protection (impressed current and sacrificial anode), anodic
protection, corrosion inhibitors – types and mechanism of inhibition.
Electrolytic methods in electronics: Electroplating – principle and process of electroplating of
copper on iron – Electroless plating – principle and electroless plating of copper, Self assembled
monolayers.
UNIT - IV
Instrumental techniques in chemical analysis
Introduction of spectroscopy – interaction of electromagnetic radiation with matter.
UV-visible (electronic) spectroscopy: Frank-Condon principle – types of electronic transitions.
Lambert-Beer’s law, numericals (simple substitution) – Instrumentation-Single beam UV-visible
spectrophotometer. Applications of UV-visible spectroscopy: qualitative analysis, quantitative
analysis, detection of impurities, determination of molecular weight and dissociation constants.
Infrared (vibrational) spectroscopy: Principle of IR spectroscopy, types of molecular vibrations-
stretching and bending vibrations, vibrational spectra diatomic molecules, selection rule for
harmonic vibrational transition – Instrumentation. Applications of IR spectroscopy: Determination
of force constant – numericals (simple substitution), detection of impurity and identification of
nature of hydrogen bonding.
Learning Resources:
Text Books:
1. Engineering Chemistry, P.C. Jain, 15th edition, 2005, Dhanpat Rai Publishing Company
(P) Limited, New Delhi.
Reference Books:
1. A text book of Engineering Chemistry, S.S. Dara, 11th Reprint, 2008, S. Chand &
Company Limited, New Delhi.
2. A text book of Engineering Chemistry, Shashi Chawla, 3rd Edition, Dhanpat Rai &
Company Pvt. Ltd., New Delhi.
3. Essentials of Physical Chemistry, B.S. Bahl and G. D. Tuli, 2nd Edition,S.Cahand&
Company
4. Text book of analytical chemistry, Y.Anjaneyulu, K. Chandrasekhar and Valli Manickam,
1st Edition, 2006, Pharma Med press.
5. Engineering Chemistry, O. G. Palanna, 1st Edition, 2009 Tata McGraw Hill Education
Pvt. Ltd., New Delhi.

VR10
Web References:
1. http://www.cip.ukcentre.com/steam.htm
2. http://corrosion-doctors.org/Modules/mod-basics.htm
3. http://chemwiki.ucdavis.edu/Analytical_Chemistry/.htm
4. http://teaching.shu.ac.uk/hwb/chemistry/tutorials/molspec/uvvisab1.htm
5. http://www.prenhall.com/settle/chapters/ch15.pdf

VR10
FY 2003B
BASICS OF CIVIL AND MECHANICAL ENGINEERING

Tutorial : -- Semester End Examination: 70 Marks
Objectives: To introduce basic knowledge on simple Stresses & Strains

To introduce basic knowledge on Civil engineering materials & structures
To impart basic knowledge on masonry’s, sub-structure & super-structure of a
building
To impart basic knowledge on the principles & types of surveying, measuring
the distances & angles in surveying
To impart the knowledge of basic manufacturing methods and power
transmission in mechanical engineering
To teach the working principle of Internal Combustion Engines and
refrigeration
To provide knowledge about various layouts of power plants & get acquainted
with mechanical elements

Outcomes:
Attain basic knowledge on simple Stresses & Strains (a)
Attain basic knowledge on Civil engineering materials & Civil engineering
structures (a)
Attain basic knowledge on masonry’s, sub-structure & super-structure of a
building. (a)
Attain basic knowledge on the principles of surveying, types in surveying,
measuring the distances & angles in surveying (a)
Gain fundamental knowledge about the basics of manufacturing methods.
(a,d)
Understand the principle of operation of different I. C. engines. (a,d)
Describe the performance of different types of refrigeration systems. (a,d,)
Understand about gear nomenclature, and do the simple calculations in
transmission of Power. (a,d)
Part – A Civil Engineering

UNIT – I
Simple stress and strains: Definition of Mechanics- External and Internal forces-Stress and Strain-
Elasticity and Hook’s Law- Relations between elastic constants.
Civil Engineering Materials: Bricks, Stones, Cement, Steel and Cement Concrete.
Sub-structure and Super structure: Soil, Types of Foundations, Bearing capacity of Soil, Brick
Masonry, Stone Masonry, Flooring, Roofing and Plastering.

VR10
UNIT – II
Surveying: Objectives, Types, Principles of Surveying. Measurement of distances, angles – Levelling.
Civil Engineering Structures: Roads- Classification, Cross section of roads.

Bridges- Necessity, Components, Classification.
Dams- Purpose, Classification
Part – B Mechanical Engineering

UNIT – III
Basic Manufacturing Methods : Principles of casting , green sand moulds , Advantages and
applications of casting ; Principles of gas welding and arc welding, Soldering and Brazing ; Hot
working – hot rolling , Cold working – cold rolling ; Description of basic machine tool- Lathe –
operations – turning, threading, taper turning and drilling ;
Power Transmission : Introduction to belt and gears drives , types of gears , Difference between
open belts and cross belts, power transmission by belt drives ; (theoretical treatment only ) .
UNIT – IV
Power Plants : Introduction , , working principle of nuclear power plant and steam power plant,
Alternate sources of energy – solar , wind and tidal power;
Refrigeration& Air Conditioning : Definition – COP , Unit of Refrigeration , Applications of
refrigeration system, vapour compression refrigeration system , simple layout of summer air
conditioning system ;
IC Engines : Introduction , Main components of IC engines , working of 4-stroke petrol engine and
diesel engine , working of 2- stroke petrol engine and diesel engine , difference between petrol and
diesel engine , difference between 4- stroke and 2- stroke engines.
Learning Resources:
Text Books
1. Basic Civil Engineering by M. S. Palanichamy, 3rd Edition, Tata Mc Graw-Hill Publishing
Company Limited, New Delhi. 2002
2. Basic Mechanical Engineering, by T S Rajan, 3rd Edition, New Age International Ltd. First
Reprint 1999.
References:
1. Refrigeration and Air Conditioning by Zakria Baig, Radiant Publishing House, Hyd.
2. Basic Civil and Mechanical Engineering by G.Shanmugam and M S Palanichamy, Tata
Mc Graw-Hill Publishing Company Limited, New Delhi.
3. Thermal Engineering, by R Rudramoorthy, 4th reprint 2006,Tata McGraw-Hill Publishing
Company Ltd. New Delhi. (2003)
Web references :
1. www.result.khatana.net/2010/07/ge2152
2. www.engiblogger.com/mechanical/mechan
3. www.indiastudychannel.com/resources/5...
4. www.scribd.com/doc/15653381/Basic-Civ

VR10
FY 2004EM
ENGINEERING MECHANICS - II

Objectives: To teach the basic principles of mechanics applicable to the motion of

particles and rigid bodies.
To introduce with mathematical description of the plane motion of rigid
bodies.
This course is designed to enable students to acquire fundamental
knowledge for engineering design

Outcomes:
Determine the kinematic relations of particles & rigid bodies. (a)
Determine the mass moment of inertia of rigid bodies. (a)
Apply equations of motions to particle and rigid body motion. (a,e)
Analyze motion of particles & rigid bodies using the principle of energy and
momentum methods. (e)
Prerequisites: Basic Mathematics & Physical Science
UNIT – I
Kinematics of Rectilinear Translation: Introduction, displacement, velocity and acceleration.
Motion with Uniform and Variable acceleration.
Kinetics of Rectilinear Translation: Equations of rectilinear motion. Equations of Dynamic
Equilibrium: D’Alembert’s Principle. Work and Energy, Conservation of energy, Impulse and
Momentum, Impact-Direct central Impact.
UNIT – II
Kinematics of Curvilinear Motion: Introduction, rectangular components of velocity &
acceleration. Normal and Tangential acceleration. Motion of projectiles.
Kinetics of Curvilinear Motion: D’Alembert’s Principle in curvilinear motion – Work and energy.
UNIT –III
Moment of Inertia of Material Bodies: Moment of inertia of a rigid body – Moment of inertia of
laminas- slender bar, rectangular plate, Circular plate, circular ring, Moment of inertia of 3D
bodies- cone, solid cylinder, sphere & parallelepiped.
Rotation of a Rigid Body about a Fixed Axis: Kinematics of rotation, Equation of motion for a
rigid body rotating about a fixed axis – Rotation under the action of a constant moment.
UNIT – IV
Kinematics of plane motion: Concepts of relative velocity and instantaneous center.
Kinetics of plane motion: Equations of motion, Dynamic equilibrium of symmetrical rolling
bodies.

VR10
Learning Resources:
Textbooks:
1. Engineering Mechanics by S.Timoshenko & D.H.Young, 4th Edition, 2007, McGraw Hill
International Edition. (For Concepts and symbolic Problems).
2. Engineering Mechanics Statics and dynamics by A.K.Tayal, 13th Edition,2006, Umesh
Publication, Delhi, (For numerical Problems using S.I.System of Units).
Reference books:
1. Vector Mechanics for Engineers Statics and Dynamics by Beer and Johnston, 3rd SI Metric
Edition, Reprint 2010, Tata McGraw Hill Publishing Company, New Delhi.
2. Engineering Mechanics by SS Bhavikatti and KG Rajasekharappa. 4th Edition, 2012, New
age International Private Limited.
3. Singer’s Engineering Mechanics Statics and Dynamics by K.Vijaya Kumar Reddy and J
Suresh Kumar 3rd Edition 2010, SI Units-BS Publications.
Web References:
1. http://openlibrary.org/books/OL22136590M/Basic_engineering_mechanics
2. http://en.wikibooks.org/wiki/Engineering_Mechanics
4. http://imechanica.org/node/1551
5. http://emweb.unl.edu/
6. http://ebooks-freedownload.com/2009/11/engineering-mechanics-statics-12.html
7. http://www.ebookee.com/Engineering-Mechanics-Statics_37859.html

VR10
FY 2005
PROGRAMMING IN C
Lecture : 3 Hrs/week Internal Assessment: 30 Marks

Practical : --- Credits: 3
Objectives: An ability to use modern C application development tools and good knowledge
of C’s keywords, data types and structures, control structures, and program
organization.
An ability to apply knowledge of mathematics, science, engineering and
technology in problem solving using C programming language.
Knowledge and skills of applying structure programming methods, techniques
and standard library functions.

Outcomes:
Understand the fundamentals of C programming. (a,k)
Analyze the loops and decision making statements to solve the problem. (b,k)
Implement different Operations on arrays. (b,k)
Apply functions to solve the given problem. (b,k)
Understand pointers, structures and unions. (b,k)
Implement file Operations in C programming for a given application. (b,k)
UNIT – I
Constants, Variables and Data Types: Character Set, , Keywords and Identifiers, Constants, Variables,
Data Types, Declaration of Variables, Assigning values to Variables, Declaring variable as a constant.
Operators and Expressions: Introduction, Arithmetic Operators, Relational Operators, Logical Operators,
Increment and decrement operators, Conditional Operators, Bitwise Operators Special Operators.
Precedence of Arithmetic Operators.
Managing Input and Output Operations: Introduction, reading a character, writing a character, formatted
I/O.
UNIT – II
Decision Making and Branching: Introduction, Decision Making with IF statement. Simple IF
Statement, the IF ELSE Statement, Nesting of IF ELSE Statement. The ELSE IF Ladder. The
Switch Statement, the GOTO Statement, break and continue
Decision Making and Looping: Introduction, the WHILE statement, the DO Statement, the FOR
statement, Jumps in Loops.
UNIT – III
Arrays: Introduction, One Dimensional Arrays, Declaration of one dimensional arrays, Initialization of one
dimensional arrays, two-dimensional arrays, initializing two dimensional arrays, multi dimensional arrays.
Character Arrays and Strings: Introduction, Declaring and Initializing string variables. Reading strings
from Terminal. Writing string to screen. Arithmetic operations on characters. Putting strings together,
Comparison of two strings, string handling functions.
VR10
User Defined functions: Introduction, user defined functions, storage classes, a multi function
program, elements of user defined functions, definition of functions, return values and their types,
function calls, function declaration, parameter passing techniques, recursion.
UNIT – IV
Structures and Unions: Introduction, defining a structure, declaring structure variables, accessing structure
members, structure initialization, operations on individual members, Unions.
Pointers: Introduction, Understanding Pointers, accessing the address of the variable, declaring pointer
variables, Initialization of pointer variables. Accessing a variable through its pointer.
File Management in C: Introduction, defining and opening a file, closing a file, Input/Output operations on
files, pre processor directives and macros.
Learning Resources:
Text Book:
1. Programming in ANSI C, E. Balagurusamy, 4th Edition, 2010, TMH Publishers.
Reference Books:
1. Programming with C (Schaum's Outlines) by Byron Gottfried, 2nd Edition, 1998, Tata
Mcgraw-Hill.
2. The C programming language by Kernighan B W and Ritchie O M,
Prentice Hall, 2nd edition, 2009.
3. Programming with C by K R Venugopal & Sudeep R Prasad,3rd Edition, 1997, TMH.
Electronic Materials, Websites
1. www.cprogramming.com
2. http://en.wikiversity.org/wiki/Topic:C
3. http://www.learn-c.com

VR10
FY 2006
PROFESSIONAL ETHICS
Lecture : 2Hrs/week Internal Assessment: 30 Marks
Tutorial : --- Semester End Examination : 70 Marks
Practical : -- Credits: 2
Objectives: To impart knowledge on ethics and moral values in the society.

To Study of the Engineering Safety Responsibilities and rights of Engineers
To study the practical problems and understand to solve them to improve the
living standards of people in the society.
To Study of the Codes of Ethics, rules and regulations of Professional bodies.
To study the human values and development of character
Learning
outcomes : At the end of the course the student will be able to
Understand the Human values (f)

Understand the Moral autonomy, Moral dilemmas and professional roles. (f)
Understand the Codes of Ethics, Engineers as responsible experimenters and
challenger case study. (f)
Understand the safety & risk , collegiality & loyalty, occupational crime,
professional rights and intellectual property rights (f)
Understand the Global issues (f)
UNIT – I
Engineering Ethics : Senses of 'Engineering Ethics' - variety of moral issued - types of inquiry -
moral dilemmas - moral autonomy - Kohlberg's theory - Gilligan's theory - consensus and controversy
– Models of Professional Roles - theories about right action - Self-interest - customs and religion -
uses of ethical theories.
UNIT –II
Human Values: Morals, Values and Ethics – Integrity – Work Ethic – Service Learning – Civic
Virtue – Respect for Others – Living Peacefully – caring – Sharing – Honesty – Courage – Valuing
Time – Co-operation – Commitment – Empathy – Self-Confidence – Character – Spirituality
UNIT –III
Engineering as Social Experimentation: Engineering as experimentation - engineers as
responsible experimenters - codes of ethics - a balanced outlook on law - the challenger case study
Safety, Responsibilities and Rights: Safety and risk - assessment of safety and risk - risk benefit
analysis and reducing risk - the three mile island and chernobyl case studies. Collegiality and loyalty -
respect for authority - collective bargaining - confidentiality - conflicts of interest - occupational crime
- professional rights - employee rights - Intellectual Property Rights (IPR) - discrimination.

VR10
UNIT – IV
Global Issues: Multinational corporations - Environmental ethics - computer ethics - weapons
development - engineers as managers-consulting engineers-engineers as expert witnesses and advisors
-moral leadership-sample code of Ethics (Specific to a particular Engineering Discipline).
Learning Resources:
Text books
1. Mike Martin and Roland Schinzinger, "Ethics in engineering", 3rd Edition McGraw Hill,
New York 1996.
2. Govindarajan M, Natarajan S, Senthil Kumar V. S, “ Engineering Ethics”, Prentice Hall of
India, New Delhi, 2004.

VR10
FY 2051C
ENGINEERING CHEMISTRY LABORATORY

Practical : 3 Hrs/week Credits: 2
Objectives: To make students familiar with the methods of analysis of various parameters
of water samples.
To impart practical knowledge of different types of chemical reactions used for
chemical analysis.
To develop analytical skills in the engineering students by allowing them to
perform chemical analysis on instruments.
To demonstrate practically certain phenomena like corrosion, corrosion control
by inhibitors and coatings, photochemical reactions, so that the students can
better understand the principles behind these phenomena

Outcomes:
Perform the analytical experiments; improve analytical skills and attitude which
help them to apply these skills in their field of engineering. (a,b)
Understand the handling maintenance and performance of analytical
instruments. (a,b)
Understand the practical knowledge of various chemical phenomena by
demonstration of experiments (a,b)
List of Experiments
1. Determination of total alkalinity of water sample

a) Standardisation of HCl solution
b) Determination of total alkalinity
2. Determination of chlorides in water sample
a) Standardisation of AgNO3 solution
b) Determination of chlorides in the water sample
3. Determination of hardness of water sample
a) Standardization of EDTA solution
b) Determination of total hardness of water sample
4. Determination of available chlorine in bleaching powder
a) Standardisation of sodium thiosulphate
b) Determination of available chlorine
5. Estimation of Mohr’s salt – Dichrometry
a) Standardization of K2Cr2O7 solution
b) Estimation of Mohr’s salt
6. Estimation of Mohr’s salt – Permanganometry
a) Standardization of KMnO4 solution
b) Estimation of Mohr’s salt
7. Conductometric determination of a strong acid using a strong base
8. pH metric titration of a strong acid vs. a strong base

VR10
9. Determination of corrosion rate of mild steel in the absence and presence of an inhibitor
10. Electroplating of Nickel on iron article
11. Chemistry of Blue Printing
12. Colorimetric determination of potassium permanganate
13. Preparation of Phenol-Formaldehyde resin
14. Spectrophotometry
Learning Resources
1. “Experiments in Applied Chemistry” by Sunitha Rattan, 2nd Edition 2003, S.K.Kataria & Sons
2. “Laboratory Manual on Engineering Chemistry” by S.K.Bhasin and Sudha Rani, 2nd Edition
2002, Dhanpak Rai publishing company, New Delhi.

VR10
FY 2052
C-PROGRAMMING LABORATORY

Practical : 3 Hrs/week Credits: 2
Objectives: Program structure, good knowledge of C keywords, data types and control
structures.
Practice on Arrays (one of the linear data structure), Strings and Functions.
Practice on pointers, structures, unions and Files.
Practical Knowledge and skills of applying structure programming methods,
techniques and standard library functions
Learning At the end of the course the student will be able to

Outcomes:
Understand the fundamentals of C programming. (a,k)
Analyze the loops and decision making statements to solve the problem.
(b,k)
Implement different Operations on arrays. (b,k)
Apply functions to solve the given problem. (b,k)
Understand pointers, structures and unions. (b,k)
Implement file Operations in C programming for a given application. (b,k)
List of Lab Exercises :
WEEK-I
1) Write a C-Program to perform the simple arithmetic operations.

2) Write a C-Program to calculate area and circumference of the triangle and rectangle.
3) Write a C-Program to swap the two numbers without using third variable.
WEEK-II
1) Write a C-Program to find the biggest of the given three numbers.

2) Write a C-Program to find the roots of the given quadratic equation.
3) Write a C-Program to implement the calculator application (using switch)
WEEK-III
1) Write a C-program to convert given Decimal number to Binary number.

2) Write a C-Program to check the given number is Palindrome or not.
3) Write a C-Program to check the given Armstrong or not.

VR10
WEEK-IV
1) Write a C-Program to find the sum first N natural numbers.
2) Write a C-Program to generate the Fibonacci series.
Ex: 0,1,1,2,3,5,8,13,21,ni , n i+1 , n i +n i+1
3) Write a C-Program to print the prime numbers between 1 to N.
WEEK-V
1) Write a C-Program to find the biggest and smallest numbers in the given array.
2) Write a C-Program to find the sum, mean and standard deviation by using arrays.
WEEK-VI
1) Write a C-program to remove duplicate elements in the given array.
2) Write a C-program to insert an element at the specified location of the array.
3) Write a C-program to store the polynomial using arrays and differentiate it.
WEEK-VII
1) Write a C-Program to perform the Matrix addition, subtraction and multiplication using
arrays.
2) Write a C-Program to print the transpose of the given Matrix without using the second
matrix.
WEEK-VIII
1) Write a C-Program to find the given element is exist in the given list or not.
2) Write a C-Program to arrange the given elements in the ascending order.
WEEK-IX
1) Write a C-Program to check the given string is Palindrome or not.
2) Write a C-Program to perform the following operations with and without using String
handling functions
i) Length of the string ii) Reverse the given string
ii) Concatenate the two strings iv) Compare the two strings
WEEK-X
1) Write a C-Program to swap the two number using call by value and call by reference.
2) Write a C-Program to find the factorial of the given number using recursion.
3) Write a Program to find NCR using functions.

VR10
4) W rite a Program to find Mean and standard deviation of a given set of numbers.(Define
functions for mean and standard deviation)
WEEK-XI
1) Write a ‘C’ program to read name of the student, roll number and marks obtained in
subjects from keyboard and print name of the student, roll number, marks in 3 subjects,
and total marks by using structures concept.
2) Write a C-program to count number of characters, spaces, words and lines in given file.
3) Write a ‘C’ Program to copy the contents of one file into another file.

VR10
FY 2053W
BASIC WORKSHOP
Lecture : -- Internal Assessment: 25 Marks

Objectives: To impart the knowledge regarding the various techniques, skills and tools
necessary for engineering practice
To provide the students with hands on experience on different trades of
Engineering like Carpentry, Tin Smithy, Welding and House Wiring.

Outcomes:
Model and Develop various basic prototypes in the carpentry trade such as
Lap joint, Lap Tee joint, Dove tail joint, Mortise & Tenon joint and Cross-
Lap joint. (a,b,k)
Develop various basic prototypes in the trade of Welding such as Lap joint,
Lap Tee joint, Edge joint, Butt joint and Corner joint. (a,b,k)
Develop various basic prototypes in the trade of Tin smithy such as Saw
edge, wired edge, lap seam, grooved seam, and funnel preparations. (a,b,k)
Understand various basic House Wiring techniques such as connecting one
lamp with one switch, connecting two lamps with one switch, connecting a
fluorescent tube, Stair case wiring, Go down wiring. (a,b,k)
List of Experiments:
1. Carpentry
To make the following jobs with hand tools

a) Lap joint
b) Lap Tee joint
c) Dove tail joint
d) Mortise & Tenon joint
e) Cross-Lap joint
2. Welding using electric arc welding process / gas welding.

The following joints to be welded.
a) Lap joint
b)Tee joint
c)Edge joint
d)Butt joint
e)Corner joint
3. Sheet metal operations with hand tools.
a) Saw edge
b) Wired edge
c) Lap seam

VR10
d) Grooved seam
e) Funnel
4. House wiring
a) To connect one lamp with one switch

b) To connect two lamps with one switch
c) To connect a fluorescent tube
d) Stair case wiring
e) Go down wiring
Learning Resources:
Reference Books:
1. Kannaiah P. & Narayana K. C., “Manual on Work Shop Practice”, Scitech Publications,
Chennai.1999

VR10
ME 3001
ENGINEERING MATHEMATICS – III
Objectives: Define and explain the theory of Laplace transforms periodic function,
derivatives, unit step function, Dirac delta and convolution theorem and apply
the concepts to solve differential equation with constant and variable
coefficients.
Analyze general periodic functions in the form of an infinite convergent series
of sine and cosines.
Define Fourier integrals Fourier transforms and apply them to evaluate real
definite integrals
Solve algebra and transcendental equations using Newton Raphson, Gauss-
Seidel and Gauss elimination methods.
Analyze and Apply Numerical methods to ordinary differential equations and
partial differential equations

Outcomes:
Apply Laplace transforms and Fourier Transforms to evaluate indefinite
integrals and Engineering problems. (a,b,e)
Analyze general periodic functions in the form of an infinite convergence
series of sines & cosines. (a,b,e)
Solve algebraic, transcendental, system of equations and definite integrals
numerically. (a,b,e)
Solve initial and boundary value problems numerically. (a,b,e)
Understand the basic knowledge of computational techniques for formulating
and solving the Engineering problems. (a,b,e)
Prerequisites: Engineering Mathematics – I, Engineering Mathematics – II
UNIT – I
laplace Transforms: Definition and basic theory – Linearity property – condition for existence of
Laplace transform. First & Second Shifting properties, Laplace Transform of derivatives and integrals;
Unit step functions, Dirac delta-function. Differentiation and Integration of transforms, Convolution
Theorem, Inversion. Periodic functions. Evaluation of integrals by Laplace Transform. Transforms of
periodic function. Unit impulse function (Dirac delta function). Convolution and Duahamel formulae.
Applications to differential equations with constant coefficients, variable coefficients
UNIT – II
Fourier Series: Introduction, Euler's Formulae, Conditions for a Fourier expansion, Functions
having points of discontinuity, change of interval, odd and even functions, Expansions of odd and
even periodic functions, Half - range series, Parseval's formula, complex form of Fourier series.

VR10
UNIT – III
Fourier Series: Practical harmonic analysis.
Fourier Transforms: Introduction, Definition, Fourier integrals, Fourier sine and cosine integrals -
complex form of Fourier integrals. Fourier transforms, Fourier sine and cosine transforms - Finite
Fourier sine and cosine transforms, Fourier transforms of the derivatives of a function.
UNIT – IV
Numerical Methods: Solution of Algebraic and Transcendental Equations : Introduction, Newton -
Raphson method, Solution of simultaneous linear equations – Gauss Elimination Method - Gauss -
Seidel iterative method.
Numerical Differentiation And Integration : Finding first and second order differentials using
Newton's formulae. Numerical solutions of ordinary and partial differential equations, Euler's
method, Taylor's series method Picard's method. Runge - Kutta method of 4th order, Predicator and
Corrector method, Milne’s method, Adams - Bashforth method (for first order equations only).
Boundary value problems, Solution of Laplace's and Poisson's equations by iteration.
Learning Resources:
Text books:
1. Higher Engineering Mathematics by B.S. Grewal , 40th edition – 2007, Khana Publishers, New
Delhi for Unit –I, II, III
Reference books:
1. Advanced Engineering Mathematics by Erwin Kreyszig, 8th edition – Wiley Publishers
2. Advanced Engineering Mathematics by Jain Iyengar, 3rd Edition –Reprint 2012, Narosa
Publishers.
3. A text book of Mathematics by B.V.Ramana, Tata MC GrawHill 2003
4. Engineering Mathematics by N.P.Bali, Manish Goyal, 7th Edition – 2011, Laxmi Publications
for Unit –I, II, III
5. Introductory Methods of Numerical Analysis by S.S.Sastry for Unit –IV, 4th Edition, 2006,
Prentice-Hall of Private India Ltd.

VR10
ME 3002
MECHANICS OF MATERIALS

Objectives: To develop an understanding of the relationship between external loads

applied to a deformable body and the internal stresses, strains and deformation
induced in the body.
To develop analytical & graphical problem solving skills.

Outcomes:
Calculate stress, strain, and deformation for basic geometries subjected to
axial loading and thermal effects. (a,c,e)
Calculate bending and shear stresses from shear force and bending moment
diagram for cantilever, simply supported and over hanging beams of
transverse loading. (a,c,e)
Calculate shear stresses for torsional loading and identify the location of shear
centers for the various sections of beams. (a,c,e)
Calculate analytically and graphically (Mohr’s Circle) the maximum and
minimum normal and shear stresses and the orientations at which they occur
for an arbitrary two-dimensional stress/strain state for combined loading
conditions. (a,c,e)
Analyze and calculate bi-axial stresses in thin cylinders and spherical shells.
(a,c,e)
Prerequisites: Engineering Mathematics, Engineering Mechanics
UNIT - I
Tension, Compression and Shear : Introduction, Normal Stress and Strain, Stress-Strain Diagrams,
Elasticity and Plasticity, Linear Elasticity and Hooke’s Law, Shear Stress and Strain, Allowable Stresses
and Loads. Axially loaded members, Deflections of Axially loaded Members
Statically Indeterminate Structures: Analysis, Temperature effects, Strain Energy of Axially Loaded
Members subjected to static load.
UNIT - II
Shear force and Bending Moment: Types of Beams, Shear Force and Bending Moment,
Relationships between Load, Shear Force and Bending Moment, Shear Force and Bending Moment
Diagrams.
Stresses in Beams: Introduction, Normal Strains in Beams, Normal Stresses in Beams, Shear
Stresses in Rectangular Beams, Shear Stresses in Webs of Beams with flanges.
UNIT – III
Torsion : Introduction, Torsion of Circular Bars, Relationship between Moduli of Elasticity E and G,
Transmission of power by circular shafts, Strain Energy in pure Shear and uniform Torsion for
Statically determinate Members.

VR10
Shear Centre: Bending Axis and Shear Centre, Position of Shear Centre, Shear flow, Shear Centre of
Channel section, Angle section, T- section and I – section.
UNIT - IV
Analysis of plane stress: Stresses on inclined Sections, Plane Stress, Principal Stresses and Maximum
Shear Stress. Mohr’s Circle for Plane Stress. Hooke’s Law for Plane Stress.
Biaxial stresses: Thin Spherical and Cylindrical Pressure Vessels
Learning Resources:
Text Books:
1. Mechanics of Materials by Gere and Timoshenko, 4th Edition 1997, C B S Publishers.
Reference books:
1. Strength of Materials by Dr. Sadhu Singh, 9th Edition 2007,Khanna Publishers.
2. Strength of Materials by R.K.Bansal, 4th Edition 2010, Laxmi Publishers
3. Strength of Materials by R.K. Rajput, 4th Edition , 2007 S.Chand & Company
4. Strength of Materials by M.Chakraborti, 2nd Edition 2007 S.K.Kataria & Sons.
Web References:
1. http://www.engineersedge.com/strength_of_materials.html
2. http://www.tutorvista.com/bow/strength-of-materials-notes
3. http://www.mypptsearch.com/search-ppt/strength+of+materials/

VR10
ME 3003
KINEMATICS OF MACHINES
Lecture : 4hrs/week Internal Assessment: 30 Marks
Tutorial : 1hr/week Semester End Examination: 70 Marks
Objectives: The objectives of this course are to cover the kinematics &
synthesis of single degree of-freedom mechanisms including
velocity and acceleration of links in a mechanism.
To develop CAM motion profiles.
To develop gear terminology and gear train analysis.
Learning Outcomes: At the end of the course the students will be able to
Analyze different mechanisms and machines. (a,c,e)

Calculate position, velocity, and acceleration of linkages. (a,c,e)
Synthesize kinematical linkages. (a,c,e)
Calculate the length of path of contact,length of arc of contact,
contact ratio, no of teeth’s required to avoid interference and
speed. (a,c,e)
Develop the cam profiles. Calculate velocity, and acceleration of
follower. (a,c,e)
Prerequisites: Engineering Mechanics-II, Engineering Graphics
UNIT – I
Introduction : Mechanisms and machines, Rigid and resistant bodies, Link, Kinematic pair,
Degrees of Freedom, Classifications of Kinematic pairs, kinematic-chain, Linkage, Mechanism,
and structure, Classification of mechanisms, Equivalent Mechanisms, Four - Link (bar)
Mechanism, Inversions of Slider - Crank Chain, Double – Slider Chain.
Instantaneous centre, Notation, Number of I - Centres, Kennedy's theorem, Locating I -
Centres, Angular velocity by I - Centre Method.
UNIT - II
Velocity analysis: Introduction, Absolute and Relative Motion, Vectors, Addition and
subtraction of Vectors, Motion of a Link, Four Link Mechanism, Angular Velocity of Links,
Velocity of Rubbing, Slider - Crank Mechanism, Crank and Slotted Lever Mechanism.
Acceleration analysis : Acceleration, Four-Link Mechanism, Angular acceleration of Links,
Acceleration of Intermediate and offset points, slider-Crank Mechanism, Coriolis acceleration
component, Crank and slotted lever Mechanism.
UNIT – III
Kinematic synthesis: Stages of synthesis-Concepts of type, Number and dimensional synthesis
- Tasks of dimensional synthesis, Concepts of function generation, Rigid body guidance and path
generation, Freudenstein equation for function generation using three precision points.
Cams: Introduction, Types of cams, Types of Followers, Definitions, Graphical synthesis of
cam profile.(Knife Edge, Roller and Flat faced Followers).

VR10
UNIT - IV
Gears : Introduction, Classification of gear terminology, Law of Gearing, Velocity of Sliding,
Forms of Teeth, Cycloidal Profile Teeth, Involute Profile Teeth, Path of contact, Arc of contact,
Number of pairs of Teeth in contact, Interference in Involute Gears, Minimum number of
Teeth, Interference between Rack and Pinion, Undercutting, Comparison of Cycloidal and
Involute tooth forms.
Gear trains: Introduction, simple Gear Train, Compound Gear Train, Reverted Gear train,
Planetary or Epicyclic Gear Train, Analysis of Epicyclic Gear Train, Torques in Epicyclic Trains.
Tabular and Algebric Methods.
Learning Resources:
Text Books:
1. Theory of Machines of by S.S.Rattan. 2nd Edition, 4th Reprint 2006, TMH.
2. Mechanism and Machine Theory by J.E. Shigley,4Th Edition 2011,Oxford university
press
Reference books:
1. Theory of Mechanisms and Machines by C S Sharma and Kamlesh Purohit, Prentice
Hall of India.
2. Theory of Mechanisms and Machines by Ghosh and Mallik, 2nd Edition,1988 East
West Press
Web references:
1. http://nptel.iitg.ernet.in/Mech_Engg/IIT%20Delhi/Kinematics%20of%20Machin
es.htm
2. http://freevideolectures.com/Course/2359/Kinematics-of-Machines
3. http://www.rapidmaniac.com/search/relevant/All/solution-manual-kinematics-
and-dynamics-of-machines

VR10
ME 3004
BASIC THERMODYNAMICS

Objectives: To make students familiar with the basic concepts of thermodynamics and
need of energy conservation.
To develop an understanding of the concepts underlying first and second laws.
To provide basic understanding of pure substance behavior.

Outcomes:
Apply mass and energy balances (First Law) to a variety of simple processes
(a,c)
Apply Steady flow energy equation to a practical system of thermodynamic
devices. (a,c)
Understand the limitations of First law of thermodynamics and need of
Second law of thermodynamics (a,c)
Understand to the concept of energy and irreversibility. (a,c)
Determine the properties of a pure substance using thermodynamic tables
(a,c,e)
Analyze s Rankine’s ideal power cycle (a,c,e)
UNIT – I
Fundamental concepts and definitions: Thermodynamic system and control volume, Macroscopic
and microscopic points of view, properties and state of a substance, Thermodynamic equilibrium and
Quasi-static Process, thermodynamic path, cycle, Zeroth law, concept of temperature, Perfect gases.
Work and heat: Definition of work, units, work done at the moving boundary of a system, work
done in various non-flow processes, definition of heat, units, comparison of heat and work.
UNIT – II
First law for non-flow systems: First law of thermodynamics for a system undergoing a cycle and
for a change in state of system, internal energy and enthalpy, constant volume and constant pressure
specific heats and their relation to internal energy and enthalpy of ideal gases.
First law for flow systems: Control mass and control volume, first law of thermodynamics for a
control volume, steady state steady flow energy equation and application to engineering equipment.
UNIT – III
Second law of thermodynamics: Heat engines and Refrigerators, Statements of Second law of
Thermodynamics, Carnot cycle and the two propositions regarding the efficiency of Carnot cycle,
Thermodynamic temperature scale, processes-reversible and irreversible, factors that render a process
irreversible.

VR10
Entropy: Inequality of Classius, Entropy change in reversible process, T.dS Relations, Entropy
change of a system during an irreversible process, Principle of increase of entropy, Applications,
Entropy change of an ideal gas, Availability, Maximum work.
UNIT – IV
Pure substance: Pure substance, vapor-liquid-solid phase equilibrium in a pure substance,
Independent properties of a pure substance, Equations of state for vapor phase of a simple
compressible substance, Tables of thermodynamic properties, thermodynamic surfaces.
Vapor power cycles: Rankine cycle, Effect of pressure and temperature on the Rankine cycle, reheat
cycle, regenerative cycle, Deviation of actual cycles from ideal cycles.
Learning Resources:
Text books:
1. Engineering Thermodynamics—P.K.NAG, 3rd Edition, Reprint 2006 MC Graw Hill
Publications
2. Engineering Thermodynamics—Cengel & Boles, 7th Edition2010 MC Graw Hill
Publications
3. Thermal Engineering – Rajput, 8th Edition 2010, Lakshmi publications
Reference books:
1. Fundamentals of Engineering Thermodynamics-Rathakrishnan-2nd Edition 2006, PHI
2. Fundamentals of Classical Thermodynamics -- G.J.Van Wylen & Sonntag, 4th Edition,
1994 Wiley publication
3. Thermodynamics -- J.P.Holman.2nd Edition, 1974, McGraw Hill.
Web references:
1. http://www.iscid.org/encyclopedia/Thermodynamics.
2. http://www.transtutors.com/

VR10
ME 3005
MANUFACTURING PROCESSES
Practical : Credits: 3
Objectives: To impart the principles of various fabrication process such as casting, welding
and expose the students to various forming processes.

Outcomes:
Understand the technology of the casting processes. (a, c)
Understand the various casting methods. (a, c)
Differentiate the various joining processes with application. (a, c)
Understand the various bulk forming processes. (a, c)
Understand and apply the concept of clearance between the tool and work
piece in Sheet metal operations. (a,c,e)
Prerequisites Courses: Engineering Physics and Basics of Civil and Mechanical Engineering
UNIT – I
Metal casting: Introduction, General method in making a Casting, pattern: types, materials and
allowances. Moulding materials and equipment, Preparation, control and testing of moulding sands.
Types of Cores, introduction to Gating system.
Cupola: Description, operation and zones.
UNIT – II
Special casting methods: Permanent Mould Casting, Die Casting: Hot chamber die casting, Cold
chamber die casting, Air blown type die casting, Vaccum die cating. Centrifugal casting:True
centrifugal casting, Semi-centrifugal cating Centrifuging. Investment casting, shell moulding, CO2
process and continuous casting. Fettling of castings, casting defects:causes, remedies and testing.
UNIT – III
Welding: Gas and arc welding, principles of oxy-acetylene welding, TIG, MIG, submerged arc
welding. Resistance welding principles, Butt welding, Spot welding, Seam welding. Thermit Welding,
Electroslag welding. Laserbeam welding. Brazing & Soldering, welding defects, causes and remedies
UNIT – IV
Bulk forming processes: Introduction, Hot and Cold working of metals. Rolling, Forging,
Extrusion, Tube making, and Wire drawing.
Sheet metal working operations: Introduction, Sheet metal Blanking and Punching operations.
Clearance and shear as applied to Punching/Blanking operations. simple related problems. Elastic
recovery in bending operation.

VR10
Learning Resources:
Text books:
1. Manufacturing Technology by PN RaoVol.1,Edition-3,2009, TMH
2. Principles of Metal Casting by Heine, Loper, Rosenthal.33rd Reprint,2008,TMH
3. A course in Work shop technology Vol-I by V.S.Raghuwamshi, 2007,Dhanpatrai &
sons.
4. Mechanical Metallurgy by George. E. Dieter, SI Metric Edition 2000, McGraw Hills.
Reference books:
1. Welding and weldingTechnology by Richard L.Little,1973, Mc Graw Hill
2. Workshop Technology Vol.1 by S.K.Hazra Chowdary. Khanna publishers.
Web references:
1. http://nptel.iitm.ac.in
2. http://www.egr.msu.edu
3. http://www.engr.sjsu.edu
4. http://mechatronic.me.hfu.edu.tw
5. http://web.iitd.ac.in

VR10
ME 3006
ENVIRONMENTAL SCIENCE
Lecture : 3hrs/week Internal Assessment: 30 Marks

Tutorial : 1hr/week- Semester End Examination: 70 Marks
Practical : -- Credits: 3
Objectives: Develops the ability to evaluate local, regional and global environmental topics
related to resource use and management.
Develops the ability to understand the problems related to environmental
pollution and management.
Develops the consciousness on human impact on ecosystem and biodiversity
solutions.
Develops an ability to analyze causes and evaluate possible solutions to
environmental problems and related health issues at the local/regional level.

outcomes :
Indentify of the various natural resources; analyze their degradation and
available management. (a)
Understand the Classification and functioning of Ecosystems. (a)
Recognize the Importance of Biodiversity and its Conservation. (c,f)
Understand the Problems related to Environmental Pollution and
management. (f,h)
Apply the Role of Information Technology, Analyze social issues and Acts
associated with Environment. (i)
Prerequisites: Engineering Chemistry
UNIT – I
Introduction:
Definition, Scope and Importance of Environmental Sciences
Present global issues
Natural resources management:
Forest resources – use and over exploitation, Mining and Dams their effects on Forest and Tribal
people,
Water resources: Use and over utilization of surface and ground water, Floods, Droughts, Water
logging and Salinity, Water conflicts.
Energy resources- Energy needs, renewable and Non renewable Energy sources, use of alternate
Energy sources, Impact of Energy use on Environment;
UNIT – II
Ecosystems: Introduction, characteristic features, structure and functions of Ecosystem – Forest,

Grass land, Desert, Aquatic.
Biodiversity and Conservation:
Value of Biodiversity- Consumptive and Productive use, Social, Ethical, aesthetic and option values,
Bio-geographical classification of India- India as a mega diversity Habitat; Threats to Biodiversity-
Hot spots, Habitat Loss, Poaching of Wildlife, loss of species, seeds, etc., In-situ and Ex- situ
conservation of Biodiversity.
VR10
UNIT – III
Environmental Pollution
Causes, effects and control measures of Air pollution, Indoor Air pollution, Water pollution, Soil
pollution, Marine pollution, Noise pollution,
Solid waste management Urban, Industrial, nuclear and e-waste management
UNIT – IV
Information technology and Environment
Role of information technology in environmental sciences
Social issues and Environment
Effects of human activities on the Quality of Environment: Urbanization, Transportation,
Industrialization, Green revolution; Water scarcity and Ground water depletion,
Population growth and Environment: Environmental Impact Assessment
Environmental Acts- Water (Prevention and control of pollution) act, air (prvention and control of
pollution) act, Environmental Protection Act, Forest conservation act,
Learning Resources
Text Books:
1. AnjaneyuluY. Introduction to Environmental sciences, B S Publications PVT Ltd,
Hyderabad
2. Anjireddy.M Environmental science & Technology, BS Publications PVT Ltd,
Hyderabad
3. Benny Joseph, 2005, Environmental Studies, The Tata McGraw- Hill publishing
company limited, New Delhi.
4. Principles of Environmental Science. & Engg. P.Venu Gopala Rao, 2006,
Prentice-Hall of India Pvt. Ltd., New Delhi.
5. Ecological and Environmental Studies – Santosh Kumar Garg, Rajeswari Garg
(or) Rajani Garg, 2006, Khanna Publishers, New Delhi.
6..Essentials of Environmental Studies, Kurian Joseph & R Nagendran, Pearson
Education publishers, 2005
Reference Books:
1. A.K Dee – Environmental Chemistry, New Age India Publications
2. Bharucha Erach- Biodiversity of India, Mapin Publishing Pvt.Ltd..

VR10
ME 3051
COMPUTER AIDED DRAFTING LAB
Lecture : - Internal Assessment: 25 Marks
Tutorial : - Semester End Examination : 50 Marks
Objectives: To equip students with necessary skills in engineering graphics, computer aided
design, and Mechanical engineering drawing applications.
To prepare students to apply the foundations and skills of this discipline to
develop detailed CAD drawings by using existing technology and software
confidently, and effectively.

Outcomes:
Develop sectional views of different objects like body, screw, cup, nut etc.
(a,c,i,k)
Develop part drawing of Screw jack, Stuffing box, Drill jig, Pipe vice,
Eccentric (a,c,i,k)
Do assembly of Screw jack, Stuffing box, Drill jig, Pipe vice(a,c,i,k)
Any Eight of the following
Part drawing (using CAD software)
1. Part drawing of Screw jack

2. Part drawing of stuffing box
3. Part drawing of Drill jig
4. Part drawing of Pipe vice
5. Part drawing of eccentric
Assembly drawing (using CAD software)
1. Assembly of Screw jack

2. Assembly of Stuffing box
3. Assembly of Drill jig
4. Assembly of Pipe vice
5. Assembly of eccentric

VR10
ME 3052
WORKSHOP PRACTICE

Objectives: To learn about the Lathe machine in view of constructional details, different
operations to be performed on the machines and different tools.
To make understand the casting terminology and processes.
To visualise the concepts related to fitting.

Outcomes:
Understand principles of manufacturing methods like casting, Fitting and
machining. (a,b,c,k)
Apply different operations to be performed on Lathe machine. (a,b,c,k)
Develop preparations of different moulds. (a,b,c,k)
Assemble the components by using different methods of joints in
fitting(a,b,c,k)
Pattern making: Solid – I no., Split – I no.

Moulding: Stepped cone pulley, Hand wheel, Bush.
Fitting: T-Joint, Dovetail joint, Simi-Circular Joint, Hexagonal plate Jobs
Turning: Plain, Step and Taper turning, Right-hand and Left-hand threads, and Knurling.

VR10
ME 4001
ENGINEERING MATHEMATICS – IV
Objectives: Define Complex variable functions, limit, continuity, differentiability,

analytic functions and apply these functions to derive Cauchy-Riemann
equation, Harmonic function and orthogonal system
Realize complex Integration
State and prove Cauchy residue theorem
Calculate residues and apply them to evaluate real definite integrals
Explain translation, magnification, rotation, Inversion and reflection
bilinear transformation
Define continuous random variables, normal distribution, probability
densities, uniform log, gamma, beta, wei bull joint distributions
Apply relevant distribution to the data, check discrete and continuity of the
data and transform observation to near normally.
Explain population samples
Define sampling distribution, mean, variance.
Explain method of least of square, correlation, lines of regression

Outcomes:
Determine analytic functions and non analytic functions. (a,b,e)
Evaluate real definite integrals by complex integration. (a,b,e)
Estimate probability densities using different techniques. (a,b,e,)
Determine variance and S.D of sampling distribution. (a,b,e)
Prerequisites: This course assumes the knowledge of mathematics at 10+2 level
UNIT – I
Complex analysis: Introduction, continuity, Cauchy-Riemann equations. Analytic functions,
Harmonic functions, Orthogonal systems, Complex integration, Cauchy's integral theorem,
Cauchy's integral formula
UNIT – II
Taylor's series, Laurent's series, Zeros and singularities. Residue theorem, calculation of residues,
evaluation of real definite integrals (by applying the residue theorem).
Standard transformations : Translation - Magnification and Rotation – Inversion and
reflection - Bilinear transformation.

VR10
UNIT – III
Probability densities: Continuous random variables – Normal distribution – Normal
approximation to the binomial distribution – Other probability densities – Uniform distribution
– Log – Normal distribution – Gamma distribution – Beta distribution – Weibull distribution –
joint distributions – Discrete and continuous checking if the data are normal – Transforming
observations to near normally.
UNIT – IV
Sampling distributions: Populations and samples – Sampling distribution of the mean (SD
known) – Sampling distribution of the mean (SD unknown) – Sampling distribution of the
variance.
Statistics: Method of Least Squares – correlation – Regression
Learning Resources:
Text books:
1. Higher Engineering Mathematics by B.S. Grewal , 40th edition – 2007 Khana
Publishers, New Delhi (Unit I and Unit II)
2. Probability and statistics for Engineers by Richard A.Johnson,C.B.Gupta 7th Edition
2008– Prentice Hall of India (Unit III and Unit IV)
Reference books:
1. Advanced Engineering Mathematics by Erwin Kreyszig, 8th edition – 2007 Wiley
2. Publishers
3. Advanced Engineering Mathematics by Jain Iyengar, 3rd Edition – Narosa
4. Publishers
5. A text book of Mathematics by B.V.Ramana, 2003 Tata Mc Graw Hill.
6. Engineering Mathematics by N.P.Bali, Manish Goyal, 7th Edition – 2011 Laxmi
7. Publications

VR10
ME 4002
ADVANCED MECHANICS OF MATERIALS

Objectives: To provide students with an understanding of advanced topics concerning the

response of materials and structural elements to applied forces and
deformations..

Outcomes:
Calculate deflection of beams under different boundary and loading conditions.
(a,c,e)
Analyze and determine statically indeterminacy in fixed and continuous beams.
(a,c,e)
Analyze and calculate stresses and strains for thick pressure vessels. (a,c,e)
Understand the concept and to determine stresses in curved beams having
different cross-sections. (a,c,e)
Calculate stresses and deflections for the discs having high speed rotations.
(a,c,e)
Calculate safe load for columns with different boundary conditions. (a,c,e)
Prerequisites: Mechanics of Materials, Engineering Mechanics-I, Engineering Mathematics-I,

Engineering Mathematics-II
UNIT - I
Deflections of beams : Introduction, Differential Equations of the Deflection Curve, Deflections by
Integration of the Bending Moment Equation integration of the Shear Force and Load equations,
Deflections by Moment Area Method and Macaulay’s Method.
UNIT - II
Statically indeterminate beams: Statically indeterminate Beams, Analysis by the differential
equations of the Deflection curve, Moment Area Method.
Continuous beams: Clapeyron’s theorem of three moments, Beams with constant and varying
moments of inertia.
UNIT – III
Thick pressure vessels: Thick Cylinders: Lame’s theory, Radial Deflection, Compound Cylinder.
Curved beams: Stresses in Beams of small and large initial curvature, The Winkler-Bach theory,
Stresses in Crane Hook and C-Clamp with Rectangular, Circular and Trapezoidal cross-sections.
UNIT - IV
Centrifugal stresses: Introduction, Rotating Ring, Rotating Disc, Rotating Disc of uniform strength.
Columns : Buckling and Stability, Columns with Pinned ends, Columns with other support
conditions, Limitations of Euler’s Formula, Rankine’s Formula, Columns with eccentric Axial Loads,
Secant formula

VR10
Learning Resources:
Text Books:
1. Mechanics of Materials by Gere and Timoshenko, 4th Edition, 1997, C B S Publishers &
Distributors.
Reference books:
1. Strength of Materials by Dr. Sadhu Singh, 9th Edition 2007, Khanna Publishers.
2. Strength of Materials by R.K.Bansal, 4th edition 2010, Laxmi Publishers.
3. Strength of Materials by R.K. Rajput, 4th edition 2007S.Chand & Company.
4. Strength of Materials by M.Chakraborti, 2nd Edition, 2007 S.K.Kataria & Sons.
Web references:
1. http://www.engineersedge.com/strength_of_materials.html
2. http://www.tutorvista.com/bow/strength-of-materials-notes
3. http://www.mypptsearch.com/search-ppt/strength+of+materials/

VR10
ME 4003
APPLIED THERMODYNAMICS
Lecture : 4 hrs/week Internal Assessment: 30 Marks
Objectives: To make the student understand the working principles of main components of
a steam power plant, compressors and the principles of refrigeration and air
conditioning

Outcomes:
Identify the different types of steam generators and the function of the
components. (a,e,j)
Analyse and solve problems associated with nozzles by using molier diagram
and steam tables. (a,e,j)
Analyse the different types of steam turbines for their performance. (a,c,e,j)
Describe the purpose, construction and operation of different condensers (a,e,j)
Understand the principles of reciprocating compressors and rotary
compressors and their application. (a,e,j)
Understand and analyze basic vapour compression refrigeration cycle (a,c,e,j)
Understand psychometric process and air- conditioning systems (a,c,e,j)
Prerequisites: Basic Thermodynamics
UNIT – I
Steam boilers: Function, classification, working of Cochran boiler and Babcock and Wilcox boiler,
Mountings & Accessories.
Steam nozzles: Types of nozzles, isentropic flow through nozzles, Effect of friction, Nozzle
efficiency, Critical pressure ratio and maximum discharge, calculation of throat and exit areas using
Mollier diagram.
UNIT - II
Steam turbines: Types of steam turbines, Impulse turbines, pressure and velocity compounding,
velocity diagrams, work output, power, blade efficiency and stage efficiency, Reaction turbines,
velocity diagrams, degree of reaction, work output, power, blade efficiency and stage efficiency,
Governing of turbines, Overall efficiency and reheat factor.
Steam condensers: Jet and Surface condensers, condenser vacuum and vacuum efficiency,
Condenser efficiency, Thermodynamic analysis, Air pumps, Capacity of air extraction pump.
UNIT – III
Reciprocating air compressors: Classification, Operation, Effect of clearance volume, compression
ratio, volumetric efficiency, indicated power, Single-stage and Multi-stage compressors, Effect of
inter-cooling, optimum intermediate pressure in a two-stage compressor.
Rotary compressors: Introduction, Types and their applications, principles of working, static and
total head values, Centrifugal compressor- velocity vector diagrams, pressure coefficient, pre whirl,
Axial flow compressor - polytrophic efficiency, Surging, Choking and Stalling, Centrifugal compressor
versus axial flow compressor.

VR10
UNIT - IV
Refrigeration: Need for Refrigeration, Definitions, Methods of refrigeration, Working of
Refrigerator & Heat pump, Reversed Carnot and Bell - Coleman cycles, Refrigerating effect, COP,
vapor compression refrigeration system, influence of various parameters on cycle performance, Vapor
absorption refrigeration cycle.
Psychrometry and air conditioning: Introduction, psychrometric properties, Psychrometric
relations, Psychrometric chart, psychrometric processes, Comfort conditions, Air conditioning
systems.
Learning Resources:
Textbooks:
1. Engineering Thermodynamics-Cengle and Boles, 7th edition 2010 MC Graw Hill publications,
7th edition 2010
2. Thermal Engineering ---Rajput,8th Edition, 2010 Lakshmi publications
Reference books:
1. Treatise on Heat Engineering - V.P. Vasandani and D.S. Kumar.3rd Edition,1979 ,
Metropolitian publishers.
2. Refrigeration and Air Conditioning - C.P. Arora 2nd Edition, 2006 Tata MC Graw Hill.
3. Refrigeration and Air Conditioning – S.C.Arora & Domakundwar Dhanpat Rai Publication
2007
4. Engineering Thermodynamics-Achuthan—2nd Edition, 2009 PHI
Note: Use of Steam Tables and Refrigeration and Air-Conditioning Tables are permitted in
Examinations.
Web references:
1. http://www.iscid.org/encyclopedia/Tthermodynamics.
2. http://www.transtutors.com/

VR10
ME 4004
FLUID MECHANICS

Objectives: To expose the student to the fundamental aspects of fluids at rest, fluids in
motion, fluid kinematics, fluid dynamics, fluid properties and methods of flow.
To teach the principles of fluid motion and derive governing equations from
basic principles and their use in analyzing and solving flow problems.

Outcomes:
Understand the concepts of mass, momentum, and energy in engineering
applications. (a,e)
Develop basic understanding of the fundamental equations of fluid mechanics.
(a,d,e,)
Analyze hydrodynamic forces in submerged bodies. (a,e)
Apply the Bernoulli equation to solve problems in fluid flows. (a,c,e)
Understand about laminar and turbulent boundary layer concepts. (a,e)
Understand and analyze of compressible flow through converging-diverging
nozzles. (a,e)
Prerequisites: Engineering Mechanics-I, Engineering Mechanics-II
UNIT – I
Introduction: Definition of fluid, properties of fluid – density, specific weight, specific gravity,
viscosity, compressibility, surface tension, capillarity, Classification of fluids, vapor pressure.
Fluid statics: Pressure, variation of pressure in fluid, pressure head, Pascal’s law, measurement of
pressure- simple and differential manometers, Total pressure and center of pressure on plane and
curved surfaces, Buoyancy and Metacentric heigh.
UNIT – II
Fluid kinematics: Description of fluid flow, Velocity and acceleration of fluid particle, type of fluid
flow, Description of flow pattern, Rotation and irrotational flow, velocity potential, stream function,
continuity equation in Cartesian coordinates.
Fluid dynamics: Introduction, Control volume & control surface, Euler’s equation of motion along a
stream line, Bernoulli’s equation and applications, Pitot tube, Venturimeter, orifice meter, coefficient
of discharge.

VR10
UNIT – III
Impulse momentum equation: Impulse momentum Principle, Equation and Applications-Force on
pipe bend
Flow through pipes: Types, Reynolds experiment, laws of fluid friction, Darcy-Wiesbach equation,
minor losses, hydraulic gradient, Total energy lines, pipes in series and parallel, transmission of power
through a pipe, water hammer, flow through a circular pipe, Hagen-Poiseulle law.
UNIT – IV
Boundary layer theory: Introduction, boundary layer thickness, displacement thickness, momentum
thickness, energy thickness, boundary layer growth on a flat plate, separation of boundary layer,
Method of controlling boundary layer.
Flow of compressible fluids: Equation of state, Gas laws, Equation of motion, Equation of
Continuity and Equation of Energy, Propagation of elastic waves, Mach number, Mach cone, Shock
waves, Stagnation point, flow of compressible fluid through Venturi meter, concept of lift and drag.
Learning Resources:
Text books:
1. Hydraulics and fluid mechanics - P.N. Modi & S.M.Seth, 17th Edition, 2009,Standard Book
House
2. Fluid Mechanics and Hydraulic machines - R.K.Bansal, 9th Edition 2011, Laxmi Publications
Reference books:
1. Fluid mechanics and fluid power engineering - D.S.Kumar, 7thReprint 2011Laxmi Publications
2. Fluid mechanics including Hydraulic machines - A.K.Jain, 10th Edition 2010 khanna
Publishers
3. Fluid Mechanics-K.L..Kumar, 8th Reprint 2012 ,S.Chand
Web references:
1. http://www.iscid.org/encyclopedia/Fluid_Mechanics.
2. http://www.efluids.com/
3. http://fluid.power.net/
4. www.mastep.sjsu.edu/resources/engineer.htm

VR10
ME 4005
MATERIAL SCIENCE AND METALLURGY

Objectives: To introduce the basic concepts concerning the materials in the world.
To explain the structure and properties of crystalline and non-crystalline
materials, the symmetry and defects of crystal structures, physical properties,
mechanical properties and changes in structure;
To explain the different heat treatment approaches and technologies which
have led to our understanding of materials' structure and properties;
To provide sufficient background material to enable students to continue with
more specialized courses, such as Nano Science and other physical science
subjects.
.

Outcomes:
Acquire an understanding of the main concepts related to the structure and
properties of materials (a,d)
Understand about phase rules and Iron-Iron Carbon equilibrium diagram,
TTT diagrams (a,d)
Understand the basic concepts of Heat treatment processes (a)
Understand the various strengthening mechanisms. (a)
Understand the basic steps involved in the Powder Metallurgy process (a)
Understand the basic methods of manufacturing various types of composite
materials (a)
Prerequisites: Engineering Physics, Chemistry
UNIT – I
Properties of materials: Physical properties - Mechanical properties – Electrical properties, Magnetic
Properties and Chemical properties.
Crystallography: Classification of crystals – Bravi’s lattices – Miller Indices – Packing factor in cubic
systems – coordination number – crystal imperfections – crystal deformation – Slip and Twinning.
UNIT – II
Phase diagrams: Binary phase diagrams – Phase rule – one component system, two component
system, isomorphous, eutectic, eutectoid, peritectic and peritectoid systems, Fe-Fe3C equilibrium
diagram.
Heat treatment of steels: TTT diagrams for eutectoid, hypo and hyper eutectoid steels.

VR10
UNIT – III
Heat treatment processes: Annealing, normalizing, hardening, tempering, austempering,
martempering, flame Hardening, Induction Hardening & Chemical hardening techniques,
hardenability concept and experimental determination.
Strengthening mechanisms: Strain hardening, solid solution strengthening, grain refinement,
dispersion strengthening.
UNIT – IV
Powder metallurgy: Powder metallurgy process, preparation of powders, characteristics of metal
powders, mixing, compacting, sintering, Applications of Powder Metallurgy.
Composite materials:
Classification of composites, various methods of component manufacture of composites, particle
reinforced materials, fiber reinforced composite materials, and metal matrix composites.
Learning Resources:
Text books:
1. Introduction to Physical Metallurgy – Avener, 1997, Tata McGraw hill education
2. Material Science and Engineering - R. K. Rajput, 2009, S.K.kataria & Sons
3. Material Science and Metallurgy - Dr.V.D.Kodgirie, 1990,Everest House publication.
Reference books:
1. Material Science and Metallurgy - V. Raghavan,5th Edition, 2006 PHI Learning pvt.Ltd
Web references:
1. http://nptel.iitm.ac.in/courses.php?branch=Mechanical
2. http://nptel.iitm.ac.in/courses.php?branch=Metallurgy
3. http://en.wikipedia.org/wiki/Materials_science

VR10
ME 4006
BASIC ELECTRONICS ENGINEERING

Objectives: Provide Clear Explanation of all the Semi conductor devices( PN diode, Zener
diode, Transistor
Provide the explanation for Construction and operation of different FET
configurations.
Provide the Explanation for different oscillator circuits and operational
amplifiers.
provide Explanation for different digital circuits( combinational & sequential
circuits)

Outcomes:
Apprehend the electrical characteristics of different semiconductor devices::
Design of DC power supplies with the given Specifications. (a,c,d,h)
Interpret the construction & characteristics of FET’s. (a,h)
Appreciate different applications of transistor & able to select suitable oscillator
for the given application. (a,c,h)
analyze different digital circuits (Combinational & sequential) &able to apply
for different applications. (a,c,h)
Prerequisites: Engineering Physics
UNIT – I
Semiconductor Diodes: Semiconductor Diode, Diode Equivalent circuits, Zener diodes, Load line
Analysis, Half-Wave rectification, Full-Wave rectification, Clippers and Clampers.
Bipolar Junction Transistor: Transistor construction, Transistor operation, Common base
configuration, Common emitter configuration, Common collector configuration, Operating Point,
Biasing circuits. Transistor as an amplifier.
UNIT –II
Unipolar Devices: Construction and characteristics of JFETs, Depletion type MOSFETs,
Enhancement type MOSFETs, Fixed bias configuration, Self-bias configuration, Source Follower
Circuit, Common Gate circuit, Unijunction Transistor.
UNIT – III
Feedback And Oscillator Circuits: Feedback concepts, Feedback topologies, Barkhaussen Criteria,
Phase-Shift Oscillator, Wien Bridge Oscillator, Harteley Oscillator, Colpitts Oscillator.
Operational amplifiers and Linear ICs: Differential amplifier, Introduction to Op amps, Inverting
and Non inverting amplifier, Comparators, Instrumentation amplifier, Summing amplifier, Voltage
follower

VR10
UNIT – IV
Digital Electronics: Decimal, Binary, Octal, Hexadecimal, Conversions, Codes – BCD, Excess – 3
code, Logic gates, Truth tables. Combinational logic circuits, Adders, Subtractors, Encoders,
Decoders, Multiplexer and Demultiplexers. Flip Flops, SR, JK, T, D and Master slave JK flip Flop,
Counters, Shift registers, Study of semi conductor memories.
Learning Resources:
Textbooks:
1. Bell A.D., Electronic Devices and Circuits, 3rd Edition 1998, PHI.
2. M.Morris mano, Digital Logic and Computer Design, 3rd edition 2003, PHI.
3. N.N. Bhargava, D.L. Kulshreshtha, S.C. Gupta, Basic Electronics and Linear Circuits T.T.T.I.
Chandigrah, 4th Reprint 2006, TMH
Reference books:
1. S.Salivahanan & Vallavaraj, ‘Electronic Devices & Circuits’,4th Edition 2009 Tata McGraw Hill
Pubs.
2. Milliman & Halkies, ‘Integrated Electronics’, 48th Reprint 2008 Tata McGraw Hill Publications

VR10
ME 4051
SM & FM LABORATORY
Objectives: To familiarize the students with the use of stress, strain measuring instruments
and to enable the students to acquire the knowledge of flow meters.
The course will give the student an insight into working of various fluid
machines and be able to compare performance of fluid machines under
different working conditions

Outcomes:
Determine Young's modulus by conducting tensile, torsion tests on mild
steel rods, compression test on springs, bricks, concrete, and impact strength
of steel. (a,b,c,d,e)
Gain knowledge on working of centrifugal pumps, reciprocating pumps,
hydraulic turbines, centrifugal blowers and steam turbines and compare
performance at different operating conditions (a,b,c,d,e)
Any TEN experiments out of following
Strength of materials lab:
1. Load vs Deflection - Determination of Young's modulus on cantilever beam and

propped cantilever beam.
2. Load vs deflection on simply supported and overhanging beams. Determination of
Young's modulus of the beam material
3. (a) Rockwell Hardness test - Determination of Hardness Number for different metal
specimens such as mildsteel, cast iron, Brass, Aluminum (b) Brinnell's Hardness
Test
4. Impact Test - (a) Charpy and (b) lzod: Determination of impact strength of mild
steel and cast iron specimens
5. Torsion test - Determination of Modulus of Rigidity of the material.
6. Double shear Test - Determination of shear strength of mild steel / Torsteel
specimens.
7. Tension Test on UTM - Determination of mechanical properties of mild steel and
cast iron specimens.
8. Tests on helical spring - Determination of stiffness of Helical springs.
Fluid mechanics lab:

1. Orifice / mouthpiece - Determination of coefficient of discharge
2. Venturimeter / Orifice meter - Determination of coefficient of discharge
3. Pipe friction - Determination of friction factor and size of roughness of a given pipe.
4. Single - stage centrifugal pump - To draw the operating characteristics of the pump
and to determine the designed discharge and designed head from it.
5. Single - acting reciprocating pump - To draw the operating characteristic curves at
constant speed and determination of efficiency.

VR10
6. Gear pump - To draw the operating characteristic curves and determination of

overall efficiency
7. Pelton turbine - To draw the performance characteristic curves and determination of
overall efficiency
8. Francis / Kaplan turbine - To draw the performance characteristic curves and
determination of overall efficiency.
9. Wind tunnel a) Determination of pressure distribution on car/truck/ airfoil models
- b)Lift and drag measurement - c) Pitot tube - Velocity distribution and
calibration. d) Boundary - Layer profile.

VR10
ME 4052
COMMUNICATION SKILLS LAB
Objectives: Make the learners aware of the elements of functional English in order to
make them authentic users of language in any given academic and/or
professional situation
Develop proficiency in academic presentations
Expose real carrier oriented environment.
communication
Expose to corporate to adequate etiquette and rhetoric

Outcomes:
Refurbish and fortify the linguistic abilities of the learners (g)
Develop familiarity with different linguistic patterns including forms of writing
(g)
Develop their aplomb by multifold (g)
I. Oral communication:
(A) Fluency vs Accuracy
(i)Constructing authentic sentences

(ii) Contextual use of Rhetoric
(iii)Audience Orientation
(iv)Contextual Determination of Scope and extent of speech acts, including job interviews
(B)Pre-Programmed presentation vs Spontaneous delivery of expressions
(i) Sentence Patterns(Technical & Semi Technical)

(ii)Modes of Reference
(iii) Process of Argumentation & Substantiation
(C) Discourse Analysis
(i) Across the table discussion

(ii) Interactive Presentation
(iii) Modeling

VR10
Practicals:
Brief &interludes, Group Discussion, MOCK Press, MOCK Interviews, Seminar Presentations.
II. WRITING COMMUNICATION
(A) Letter writing
(i) Letters of persuation

(ii) Letters of Direction
(iii) Letters of Corporate Interaction
(iv) Announcements
(B) Articles
(i)Types of Articles
(ii) Means of Literature Search
(iii) Administering Questionnaires
(iv) Personal Interviews
(v) Triangulation of Data &Composition
(vi) Linguistic representation including punctuation
(vii) Graphic Representation
(viii) Syntactic Felicitators &Semantic signals.
Practicals:
Compilation of
(i)Letters & Announcement: Business Letters, Letters of enquiry, acceptance & refusal, job
Applications.
(ii)Articles: Technical, semi technical &popular articles
III. Preparations of
(i)Visual aids like Transparencies

(ii) Electronic presentations using power point, flash etc
IV. Project
Technical Paper/Report Writing
V. Evaluation:
Presentation of Technical Paper & 15min.Duaration using OHP/LCD.

VR10
Learning Resources:
References:
1. Better English Pronunciation JOD CONNOR ,2nd Edition 2009,CUP
2. English Pronouncing Dictionary, Daniel Jones (EPD) 17th Edition 2006,CUP
3. Strengthen your writing, VR Narayanan Swamy, 3rd Edition 2005,Orient Longman
4. Text, Context, Pretext, Critical issues in Discourse Analysis,2004, 1st Edition Blackwell.

VR10
ME 5001
HYDRAULIC MACHINES
Objectives: To impart knowledge of various types of hydraulic machines and their working
principles. The course expose the student's to the applications of hydraulic
devices and hydraulic systems.

Outcomes:
Apply the momentum principles for impact of jets. (a, e)
Analyze hydraulic pumps, hydraulic turbines. (a)
Study the performance characteristics of the hydraulic machines. (e)
Understand the various factors influencing the performance of hydraulic
machines. (e)
Understand the controlling methods of hydraulic turbines. (e)
Familiarize with different hydraulic devices/systems needed for various
applications. ( j)
Prerequisites: Fluid Mechanics

UNIT – I
Introduction, Classification of fluid machines, impulse action, linear impulse momentum and angular
momentum principles.
Impact of jets: Introduction, Force exerted by a fluid jet on stationary and moving flat plate and
curved vanes, flow over radial curved vanes.
UNIT – II
Hydraulic turbines: Elements of hydroelectric power plants, Heads and efficiencies of a turbine,
Classification- Pelton, Francis and Kaplan turbines, working proportions of turbines.
Performance of turbines: Unit quantities, Specific speed, Comparison and selection of turbines,
Numerical problems. Draft tube theory, Oil pressure Governing, Performance characteristics.
UNIT – III
centrifugal pumps: Types, Working, Reciprocating vs. Centrifugal pump, Work done by impeller,
Head of a pump, losses and efficiencies, Minimum starting speed, Specific speed, Multistage pumps,
Pumps in parallel, Performance characteristic curves, limitation of suction lift, NPSH, Cavitation.

VR10
UNIT – IV
reciprocating pumps: Introduction, main components, working, types work done by Reciprocating
pump, coefficient of discharge, slip, percentage slip, negative slip.
Hydraulic systems: Hydraulic-press, accumulator, lift, intensifier, crane and coupling.
Pumping devices: Hydraulic ram, Airlift pump, rotary pumps and jet pump
Learning Resources:
Text books:
1. Hydraulics and Fluid Mechanics --P.N.Modi & S.M. Seth., Standard Book House,2nd
Edition,2005.
2. Fluid Mechanics & Hydraulic Machines - by R.K.Bansal, Laxmi Publications, 9th Edition,2009.
Reference books:
1. Fluid Mechanics & Hydraulic Machines – by R.K.Rajput,4th Edition, 2008 S.Chand &
Company Limited
2. Fluid Mechanics & Fluid Power Engineering - by D.S.Kumar, SK.Kataria& Sons
Web references:
3. www.hydraulicspneumatics.com/
4. www.waterengr.com/
5. www.pumps.org/

VR10
ME 5002
DESIGN OF MACHINE ELEMENTS

Objectives: To introduce the fundamental knowledge of design, this deals about the shape,
size and material of a particular machine element.
To improve the understanding of the strength, stiffness and material
properties involved in designing and predicting the behavior of machine
components.
To introduce the basic principles for design of power screws and some
machine elements such as riveted joints, welded joints, bolted joints and cotter
joint.

Outcomes:
Acquire knowledge of preferred numbers and the use of standards in design of
machine elements. (a,c,e).
Apply multi dimensional static and fatigue failure criteria in the design and
analysis of machine components under various loading conditions. (a,c,e).
Analyze and design power screws. (a,c,e).
Analyze and design permanent joints such as the riveted and welded joints
under various loading conditions. (a,c,e).
Analyze and design detachable joints such as the bolted and cotter joint under
various loading conditions. (a,c,e).
Prerequisites: Engineering Mechanics, , Mechanics of Materials, kinematics of machinery

Advanced Mechanics of Materials
UNIT - I
Basics: Phases of design, Types of designs, standardization in design, preferred numbers and
significance.
Design for static strength: Simple Stresses - Combined stresses - Torsion and bending stresses -
stress strain relation, various theories of failure - Factor of safety and its importance in design.
UNIT - II
Design for fatigue strength: Stress concentration - Theoretical stress concentration factor - Fatigue
stress concentrations factor, Design for fluctuating stresses, Fatigue strength and endurance limit,
Goodman diagram, Soderberg line, Endurance limit - Approximate estimation.
Power screws: Types - Mechanics of power screws, efficiency, Design of Screw Jack.
UNIT – III
Fasteners: Riveted joints, Design of joints under eccentric loading, Welded joints, eccentrically
loaded welded joints.
VR10
UNIT - IV
Bolted joints, Design of joints under eccentric loading, cotter joint.
Learning Resources:
Text Books:
1. Design of machine elements by Bhandari, Tata McGraw Hill book Co.3rd Edition,2010.
2. Machine Design by P.C. Sharma & D.K. Agarwal. 4th Edition-1997 S.K.Kataria & Sons
Reference books:
1. Design of Machine Elements by Sharma & Purohit ,PHI, 10th Edition,2011.
2. Machine Design by Robert L.Norton.2nd Edition 2000.Pearson education Inaia
3. Design of Machine Elements by Kannaiah.5th Edition,1999.Scitech publication
DATA BOOKS TO BE ALLOWED IN EXAMINATION:

4. Design data book, P.S.G. College of Technology,Coimbatore,1966 P.S.G. College of
Technology
5. Design data book, Mahadevan & Balaveera Reddy – 3rd Edition 2009,CBS Publishers.
Web resources:
2. http://school.mech.uwa.edu.au
3. www.sgbau.ac.in

VR10
ME 5003
MACHINE DYNAMICS

Objectives: To equip the student with fundamental knowledge of dynamics of machines,

problems of dynamic force balance, transmissibility of forces, isolation of
systems, vibrations, instrumentation and standards

Outcomes:
Understand how to balance several masses in different planes along with
rotating and reciprocating masses. (a,c,e)
Analyze different types of governors which controls speed of the machine or
engine (a,c,e)
Attain a deeper understanding on the gyroscopic effects of rotating bodies for
aero-planes, naval ships, automobiles, and two wheelers (a,c,e)
Calculate natural frequencies for un damped and damped vibrating systems.
(a,c,e)
Analyze the response of the vibrating mass at different operating conditions
(a,c,e)
Calculate natural frequencies for different modes of vibrations for transverse
and torsional loading conditions. (a,c,e)
Prerequisites: Engineering Mechanics-I, Engineering Mechanics-II, Kinematics of Machines
UNIT – I
Balancing : Introduction, Static balancing, Dynamic balancing, Transferring of a Force from one
plane to another, Balancing of Several Masses in Different planes, Balancing of Reciprocating Mass,
Balancing of locomotives, Effects of partial balancing in locomotives.
UNIT - II
Governors: Introduction, Watt Governor, Porter Governor, Proell Governor, Hartnell Governor,
Sensitiveness of a Governor, Hunting, Isochronism, Stability, Effort of a Governor, Power of a
Governor.
Gyroscopes: Angular Velocity, Angular Acceleration, Gyroscopic Torque, Gyroscopic Effect on
Naval Ships, Stability of an Automobile, Stability of a Two Wheel vehicle.
UNIT – III
Free vibration: Introduction, Definitions, Types of vibrations, Basic features of vibrating systems,
Degree of freedom, free longitudinal vibrations, displacement, velocity and acceleration, damped
vibrations.
Forced vibration: Introduction, forced damped vibrations, magnification factor, vibration isolation
and transmissibility, forcing due to unbalance, forcing due to support motion.
UNIT - IV
Transverse vibration: Single concreted load, uniformly loaded shaft, shaft carrying several loads,
whirling of shafts
VR10
Torsional vibrations: Free torsional vibration, multifilar system, single, two, three rotor systems,
torsion ally equivalent shaft, free torsional vibration of geared system.
Learning Resources:
Text books:
1. Theory of Machines by S.S.Rattan,.3rd edition ,2011, McGraw Hills

2. Theory of Machines by R.K.Bansal, 4th edition,2009, Firewall media
Reference books:
1. Theory of Machines by R.S. Khurmi & J. K. Guptha, 1st edition,2001.

2. Mechanical vibrations by V.P.Singh 9th edition, 2009.Dhanpat Rai & company

VR10
ME 5004
I.C. ENGINES & GAS TURBINES

Tutorial : 1 hr/week Semester End Examination: 70 Marks
Objectives: This course provides the fundamental thermodynamic operating principles of

I.C. engines and Gas turbines and also exposes to the alternative fuels used in
I.C.Engines
Learning
Outcomes: At the end of the course the student will be able to
Analyze air standard cycles used in I.C. Engines and Gas turbines. (a,e,j)
Familiarize with the types of engines and their working 2-stroke and 4-stroke,
petrol and diesel engines. (c,e)
Understand different fuel supply systems like carburetor, MPFI, fuel injectors,
direct injection and their limitations. Also understand principles and operation
of various jet and rocket propulsion devices. (a,e,j)
Analyze the performance of I.C.engines , gas turbines and their operating
curves etc. (a,e,j)
Understand the combustion phenomena in I.C. Engines. (c)
Indentify various alternative fuels and their applicability. (c,j)
Prerequisites: Basic Thermodynamics, Applied Thermodynamics
UNIT – I
Gas power cycles: Air standard Carnot cycle, Otto cycle, Diesel cycle, Dual Combustion cycle, Air
standard efficiency and MEP.
I.c.engines: Introduction, Basic engine nomenclature, Review and classification of I.C. Engines,
working principles of S.I. and C.I. Engines (both 4 stroke and 2-stroke) - valve timing diagram -
Differences between S.I. & C. I. and 2 stroke & 4 stroke engines.
Concepts of Wankel, Stirling and Free Piston engines.
UNIT – II
Fuel supply systems: S.I. Engines- Carburetion, injection system, chemically correct air-fuel ratio,
Air-fuel mixture requirements, Simple float type carburetor,
C. I. Engines- Fuel supply and injection systems, Bosch fuel pump, air fuel requirements
Testing of I.c.engines: Indicator diagram, evaluation of Indicated Power, Brake power, Fuel
consumption, SFC, Mechanical & thermal efficiencies, mean effective pressure, air-fuel ratio, Heat
balance, Engine performance curves, Variables affecting engine performance for both S.I. & C.I.
Engines.
UNIT – III
Combustion processes: S.I. Engines- Normal combustion, abnormal combustion, C.I. Engines-
Ignition delay, combustion knock in C.I. engines, Knock rating of fuels- Octane number and Cetane
number.

VR10
Alternate fuels: Liquid fuels – Alcohols - Methanol, Ethanol, Alcohols for SI and CI engines,
Gaseous fuels – Hydrogen, Natural gas, CNG and LPG, other possible fuels.
UNIT – IV
Gas turbines: Closed and Open Brayton cycle gas turbines, analysis of closed cycle gas turbine ,
Compressor and turbine efficiencies, Gas turbine cycles with inter cooling, reheat and regeneration.
Jet & rocket propulsion: Basic principles of Jet propulsion - specific thrust, propulsive efficiency
and overall thermal efficiency of a jet engine; Concepts of Turbo shaft, Turbo Prop, Turbo Fan;
Principles of Rocket propulsion, Types of rocket propulsion.
Learning Resources:
Text books:
1. I.C. Engines - V.Ganesan - T.M.H Publications New Delhi. 2nd Edition, 2009.
2. Thermal Engineering- Rajput-Laxmi Publications, Delhi, 6th Edition, 2010.
Reference books:
1. Fundamentals of I.C.Engines - P.W. Gill, J.H. Smith & Ziurys- IBH & Oxford pub.
2. A Course in I.C. Engines - M.L. Mathur & R.P. Sharma - Dhanpat Rai & Sons – New Delhi, 8th
edition 1990.
3. Treatise on heat Engineering - Vasandani & Kumar-Metropolitan Book Company, Delhi, 4th
edition 2009.
4. A Course in Internal Combustion Engines – V.M. Domakundwar, Dhanapat Rai, 2nd edition
2010.
Web resources:
1. College Intranet resource: 152.152.1.100
2. http://autoclub.rso.siuc.edu/frange.html
3. http://www.howstuffworks.com/engine1.htm
4. http://inventors.about.com/library/inventors/blinternalcombustion.htm
5. http://www.animatedengines.com/

VR10
ME 5005
METAL CUTTING AND MACHINE TOOLS

Tutorial : 1 hr/week Semester End Examination: 70 Marks
Objectives: To apply the basic terminology associated with machine tools.

To familiarise with the basic principles and theories used to describe the
machining process

Outcomes: Understand the basic principles, constructional features and classification of
machine tools. (a)
Differentiate the various machining processes with applicability. (a)
Understand the various machine tool mechanisms. (a)
Analyze the basic theory of metal cutting. (a)
Get acquainted with the numerical calculations in metal cutting. (c)
Prerequisites: Manufacturing Processes, Engineering Mechanics-I
UNIT – I
Machining processes and machine tools: Introduction, Primary and
Auxiliary Motions in Machine Tools, Parameters. Defining working motions of a
Machine tool.
Lathe: Constructional details, specifications, classification of lathes.
Lathe mechanisms: Spindle speed Mechanisms in Belt driven and All Geared Head stock Apron
and Half-nut mechanisms. Lathe accessories. Lathe operations including taper turning and thread
cutting and related problems.
UNIT – II
Drilling machines: Types and specifications, spindle feed mechanism, drilling operations, drilling
time.
Shaping and planing: Constructional details, types of shapers and planers, specifications, tool
holding and work holding devices, Quick Return Mechanism and automatic feed mechanisms.
Grinding machines: General Principles, Wheel materials, Selection and specifications, Truing and
Dressing of grinding wheels, types of grinding machines, Honing and Lapping operations.
UNIT – III
Milling machines: Working Principle, Size and Specification, Up and Down Milling, Types of
milling machines, Description and working of Universal Milling machine, Milling operations, Milling
cutters, Indexing methods and Indexing Head, related problems.
Broaching: Introduction to broaching, broaches, broaching methods and Machines.

VR10
UNIT – IV
Theory of metal cutting: Introduction, Basic elements of machining, Nomenclature of single point
cutting tool, Tool Geometry, Mechanics of chip formation, Types of chips. Determination of shear
angle and chip thickness ratio, stress and strain in the chip, velocity relations, Merchant’s theory of
orthogonal cutting forces, related simple problems. Tool wear, Tool life and Tool life criteria
Heat Generation and cutting tool temperature and its measurement, cutting fluids-types and required
characteristics.
Cutting tool materials: Requirements of Tool materials and types.
Learning Resources:
Text books:
1. Workshop Technology Vol.II by Hazra Chowdary,11th Edition,2002.

2. Production Engineering by P.C. Sharma, S.Chand & Co. 10th Edition,2008
Reference books:
1. Materials and Processes in Manufacturing by E.Paul De Garmo, J.T.Black and Ronald

A.Kohser. 11th Edition,2008.
2. Machine Tool Design and Numerical Control by N.K.Mehta.2nd Edition,2010.
3. Manufacturing Science by Ghosh & Mallick,2nd Edition,1986 .Hills Horwood
Web resources:
1. www.hgfarley.com
2. www.kennametal.com/ - United States
3. www.mini-lathe.com/links.htm machinedesign.com/.../designer-s-guide-to-
metalcutting-machinery-0608 –
4. www.metalwebnews.com/wc.html
5. www.britannica.com/EBchecked/topic/463000/planer
6. www.americanmachinist.com
7. www.machinetools.net.tw/parts/taiwan_voltage_regulator.htm

VR10
ME 5006
ELECTRICAL TECHNOLOGY
Objectives: The aim of this course is to introduce the basic concepts of AC & DC circuits,
use of three-phase system, the working principle, construction, applications of
DC & AC machines and Transformers, fundamentals of electric measuring
instruments. Utilize electrical energy for applications like heating and electric
traction.

Outcomes:
Understand about Kirchoff’s laws and simple circuits (a)
Understand principles of DC Machines and Single Phase transformer (b)
Understand principles of electrical power, Induction Motors and Generators
(b)
Understand applications and utilization of various electrical equipments and
working of Electrical measuring devices (d,h)
Understand applications of various Electrical Machines in day to day life and
industrial applications (h)
Prerequisites: Engineering Physics
UNIT – I
DC and AC circuits: Kirchhoff’s laws, simple circuits – Alternating current – Waveforms – RMS –
Average values – simple R-L-C circuits, power factor, 3-phase balanced circuits.
D.C. Machines: Constructional features – Methods of excitation – Load characteristics of shunt,
series and compound generators – Torque development in motor – Torque equation
UNIT –II
Load characteristics of shunt series and compound motors – losses and efficiency of motors and
generators – principle of starters – 3 point starter only.
Transformers: E.M.F. equation – equivalent circuit – regulation – losses and efficiency – open and
short circuit tests.
UNIT – III
Induction Machines: Constructional features – principle of operation – concept of rotating
magnetic field, torque-slip characteristics – Principle of starters, Fundamentals of single-phase
induction motors and their starting.
Synchronous machines: Principle – constructional features – E.M.F. equation – Applications of
synchronous motors.

VR10
UNIT – IV
Measuring Instruments: Principle of operation of moving-coil and moving-iron instruments –
Dynamometer –type watt meter.
Utilization: Principles of resistance and induction heating – principles of electrical traction – speed
time characteristics.
Learning Resources:
Textbooks:
1. Basic Electrical Engineering by VN Mittal and Arvind Mittal, TMH,2nd Edition,2005.
2. Utilization of electrical energy by Openshaw and Taylor.1st Edition,2006.Orient Longman
Pvt.ltd
Reference Books:
1. Electrical Technology by H. Cotton5th edition 1945, (Sir Issac Pittman & Sons Ltd., London).
2. Electrical Technology by B. Hughes (ELBS) 5th edition, 1977,Longman Publishers
Web resources:
1. www.iitm.ac.in
2. www.nptel.com
3. MIT video lessons

VR10
ME 5051
GEOMETRICAL MODELING LAB
Lecture : - Internal Assessment : 25 Marks
Tutorial : - Semester End Examination : 50 Marks
Practical : 3 hrs/ week Credits : 2
Objectives: To impart geometric modeling skills required to develop mechanical

components using commercial modeling software.
Learning At the end of the course student is able to

Outcomes: Acquire knowledge of basic commands in pro-E and Catia softwares.(a,k)
Develop part modeling of Mechanical elements.(a,e,k)
Develop surface Models.(a,k)
Develop Assembly of Mechanical elements. (a,e,k)
Lab Exercises:
1. Construction of 2D drawings.
2. Modeling of simple machine components.
3. Assembly of Machine components.
4. Modeling of Complex parts.
5. Modeling of Simple surfaces.
6. Modeling of Complex surfaces
7. Solid/Surface modeling of a real part
Learning Resources:
References:
1. Pro/Engineer Wildfire 5.0 by Roger Toogood, Jack Zecher, SDC Publications, 28-Feb-
2010.
2. CATIA V5R17 for engineers & designers By Prof. Sham Tickoo, published by
Dreamtech Press, 2009; ISBN:10-81-7722-815-3, 13-978-81-7722-815-1
Web References:
1. www.ptc.com
2. www.mcadcentral.com/proe
3. www.v5train.com
4. www.igiat.com

VR10
ME 5052
ELECTRICAL AND ELECTRONICS ENGINEERING LABORATORY

Objectives: To get thorough knowledge about the basics of circuit analysis, DC

machines and transformers and characteristics of basic electronic devices.
Learning
Outcomes: At the end of the course the student will be able to
Gain knowledge of characteristics of DC machines and electronic
devices to work with basic electrical and electronics circuits. (a,b,d,k)
List of Experiments
Electrical Lab:
1. Verification of superposition theorem
2. Parameters of choke coil
3. Measurement of low and medium resistance
4. Speed control of DC shunt motor
5. Brake test on shunt motor
6. OCC of separately excited shunt generator
7. O.C and S.C test on a 1-phase transformer
8. Load test on 1-phase transformer.
Note: Any 5 experiments must be completed from above experiments.
Electronics Lab:
1 V/I Characteristics of Junction diode.

2 V/I Characteristics of Zener diode.
3 Half wave Rectifier and Fullwave rectifier.
4 OR AMP Applications
5 Common Emitter configuration
6 Characteristics of FET.
7 Characteristics of U J T
8 Transistor Biasing
9 RC coupled amplifier
10 Simple programs in Microprocessor
11 Verification of Flip – Flops. (JK, TD etc.)
12 Verification of combinational circuits (Half Adder, Full Adder, Half subtractor, Full
subtractor)
Note: (Any Five Experiments)
Reference: Laboratory Manual

VR10
ME 6001
ADVANCED MANUFACTURING PROCESSES
Objectives: To impart the knowledge of different methods of production of gears and

their finishing processes.
To impart the principles of un- conventional methods of manufacturing.
To know the various types of jigs and fixtures.
To expose the student to different methods of processing of plastics

Outcomes:
Get clear understanding of the various manufacturing processes, methods of
producing gears. (a,c)
Acquire thorough knowledge of un- conventional methods of manufacturing.
(c)
Understand the principles of location and the use of various jigs & fixtures. (c)
Analyze the methods of processing of plastics. (c)
Prerequisites: Metal Cutting & Machine Tools
UNIT – I
Gear Manufacturing
Gear materials, Types of gear manufacturing, gear generation and forming processes, Principles,
Advantages and limitations of gear milling, Gear broaching, Gear shaping, Gear hobbing, Types of
Gear hobbing.
Gear Finishing Methods: Gear burnishing, shaving, honing, lapping and grinding
Thread Manufacturing:
Thread chasing, Thread milling, rolling, grinding, tapping and thread cutting on lathe.
UNIT - II
Broaching:
Definition, advantages and disadvantages of broaching processes, nomenclature of broach, design of
broach, types of broaches and broaching machines.
Modern Machining Processes:
Introduction, need, selection, Principles of operation, equipment, merits, demerits and applications of
A J M, U S M, C H M.
UNIT – III
Introduction, need, selection, Principles of operation, equipment, merits, demerits and applications
of ECM, ECG, EDM, LBM, PAM and EBM

VR10
UNIT - IV
Jigs and Fixtures:
Introduction, design considerations of jigs and fixtures, principles of location, locating devices,
principles of clamping, clamping devices, types of drilling jigs, jig bushes, milling fixtures.
Processing of Plastics:
Blow moulding, Compression moulding and Injection moulding.
Learning Resources:
Text Books:
1. P. C. Sharma, “Production Technology” 7th Edition,2007.S.Chand&Company
2. P. N. Joshi, “Jigs and Fixtures”3rd Edition,2009.TMH
3. P. C. Pandey & H. S. Shan, “Modern Machining Processes”, Mc Graw Hill Publishing
Co. Ltd., New Delhi. 2nd Edition, 1980.
Reference Books:
1. Donaldson, “Tool Engineering”3rd Edition 2001, TMH
2. Kempster, “An Introduction to Jig and Tool Design”3rd Edition, 2004, Viva Books
Pvt.Ltd.
3. H M T “Production Technology”28th Reprint, 2008, TMH
4. Amitabha Ghosh & A. K. Mallik, “Manufacturing Science”,1986, Ellis Harwood
Web references:
1. www.srmuniv.ac.in
2. www.jntu.ac.in
3. www.iitm.ac.in
Other learning material such as computer based programs / CD, Professional standards /
regulations
MIT Video lessons
IIT, NPTEL video lessons.

VR10
ME 6002
DESIGN OF TRANSMISSION ELEMENTS

Objectives: Primarily contributes towards the concept, procedures, and data to analyze
machine elements in power transmission systems.
To apply principles of design to mechanical power transmission elements such
as shafts, keys, shaft couplings, bearings, belts, chains and gears.

Outcomes:
Analyze and Design shaft with different geometrical features under loading
(a,c,e)
Determine the key design parameter for geared transmission systems like
spur, helical, bevel and worm gears. (a,c,e)
Identify the principal failure mechanisms affecting bearing systems, and
materials and lubricants capable of resisting them. (a,c,e)
Specify the principal requirements of drive systems for given applications.
(a,c,e)
Identify appropriate transmission elements to meet specified objectives. (a,e)
Summarize appropriate mechanical components from manufacturer’s
catalogues. (a,e)
Prerequisites: Kinematics of Machines, Advanced Mechanics of Materials, Design of Machine

Elements
UNIT - I
Shafts: Design of solid and hollow shafts for strength – For Bending, Torsion, Combined bending
and torsion and axial loads
keys: Introduction, Design of square and flat keys
Shaft couplings: Regid couplings – Muff, split muff and flange couplings, Flexible coupling-
Modified Flange coupling
UNIT - II
Bearings and lubrication: Lubrication, Types of lubrications, types of lubricants, properties of
lubricants, types of Bearings, Bearing materials, Journal bearing design (using McKee’s equation and
Raymond and Boyd charts & tables)
Ball and Roller Bearings: Static load, Dynamic load, Equivalent radial load, selection of ball and
roller bearings
UNIT – III
Belt drives: Flat and V-belts, Belt constructions, Geometrical relationships, Analysis of belt tensions,
condition for maximum power, Selection of V-belts – Selection of Pulleys.
Chain drives: Introduction, Chain drives, Advantages of chain drives over belt drives, Polygonal
effect, Selection of roller chains

VR10
UNIT - IV
Spur gears : Classification of gears, Terminology of spur gear, standard systems of Gear Tooth,
Force analysis, Gear tooth failures, Selection of material, Beam Strength of gear teeth, lubrication,
Lewis Equation.
Helical gears: Terminology of helical gears, virtual number of teeth, Tooth proportions, force
analysis, Beam Strength of helical gears, effective load on gear tooth, wear strength of helical gears.
Lewis Equation.
Bevel gears: Terminology, force analysis, Beam Strength of bevel gears, wear strength. Lewis
Equation.
Worm gears: Terminology, Force analysis, Strength rating of worm gears, Wear rating of worm gears.
Learning Resources:
Text Books:
2. Machine Design by P.C. Sharma & D.K. Agarwal. 4th Edition-1996.S.K.Kataria & Sons
Reference books:
1. Design of Machine Elements by Sharma & Purohit ,PHI, 10th Edition,2011.
2. Machine Design by Robert L.Norton.2nd Edition 2009.Pearson education
3. Design of Machine Elements by Kannaiah.5th Edition,1999.Scitech Publication
Hand books to be allowed in external examination:

1. Design data book, P.S.G. College of Tech, Coimbatore 1966 P.S.G. College of Technology
2. Design data book, Mahadevan & Balaveera Reddy - 3rd Edition 2009,CBS Publishers
Web references:
6. www.sgbau.ac.in

VR10
ME 6003
ENGINEERING ECONOMICS & MANAGEMENT
Objectives: To introduce different types of business organizations

To make understand various scientific principles used for effective
management of an organization.
To introduce the basic economic concepts of market.

Outcomes:
Understand Henri Fayol’s principles of management. (a)
Understand the functions of a Personnel Department and evaluate a job for
wage determination (a)
Understand the Law of diminishing Utility and Law of equimarginal utility for
any market condition. (a,l)
Understand how to maximize profit under competition. (a)
Apply various work study techniques to reduce work content and ineffective
time. (a)
Familiarize with various functions of marketing and market research. (a,l)
Evaluate the best alternative from various options and calculate depreciation
using different methods. (a)
UNIT – I
General management: Principles of scientific management, Henry Fayol's principles of
management. Brief treatment of managerial functions: planning, organizing, staffing, directing,
coordinating and controlling etc.
Forms of Business Organization: Salient features of sole proprietorship, partnership, Joint Stock
Company: private limited and public limited companies.
Personnel management: The personnel function, functions of a personnel management, Job
Evaluation – Methods
UNIT – II
Managerial Economics: Introduction, Basic Economic concepts, Supply and Demand Law of
Diminishing Utility, Marginal Utility and Total Utility, Law of Equimarginal utility, Demand Analysis ,
Demand Schedule and Demand Curve , Factors influencing Demand, Shift in Demand, Demand
Function, Supply Schedule and Supply Curve, Factors influencing Supply, Equilibrium of Supply and
Demand, Elasticity of Demand, Elastic and Inelastic Demand
Production Aspect: Production function, Factors of production, Isoquants (Equal Product Curves),
Least cost combination of inputs for a given output, Cost output relationship (Theory of Cost).
Relationship between ATC and MC, Relationship between AC and MC. Theory of Firm, Profit
maximization under perfect competition and under monopoly, Returns to scale

VR10
UNIT – III
Work study: Introduction, Management techniques to reduce work content and ineffective time.
Method Study: Procedure, Tools for recording information: charts and diagrams, use of fundamental
hand motions (Therbligs), principles of motion economy, SIMO chart, cycle graph and chrono cycle
graph.
Work Measurement: Objectives and techniques, time study methods and rating systems.
Allowances: Standard time.
UNIT – IV
Marketing Management: Concept of selling and marketing – differences, functions of marketing,
market research, advertising and sales promotion, break-even analysis, distribution channels – types,
product life cycle.
Financial Management: Functions of financial management, simple and compound interest,
Methods of evaluating alternatives- Present Worth method. Future worth Method, Annual equivalent
method. Depreciation, common methods of depreciation: straight line method, declining balance
method, sum of year’s digits method
Learning Resources:
Textbooks:
1. Introduction to work study- ILO,2nd Edition,2006. Oxford& IBH publishing
2. Industrial& business management-Marthand & Telsang,1 Volume,2011. S.Chand & Company
Reference books:
1. Personnel Management- Tripathi and Reddy,3rd Edition 2006, vansantha desai himalaya
publishing house
2. Engineering economy- Theusen & Theusen, 8th edition,1993,Prentice Hall
Web references:
1. www.tectime.com
2. www.exinfm.com
3. www.slideshare.net
4. www.economywatch.com

VR10
ME 6004
HEAT TRANSFER
Objectives: To make the student familiar with basic mechanisms of heat transfer
[conduction, convection and radiation].
To teach the physics of conduction [solids and composites] and also concept
of electrical resistance analogy.
To teach the physics of convection, thermal radiation heat transfer.
To provide basic tools to be used in thermal system design and expose the
student to design of heat transfer equipment

Outcomes:
Formulate heat conduction problems in rectangular, cylindrical and spherical
coordinate system, by transforming the physical system into a mathematical
model. (a, e)
Familiarize with time dependent heat transfer. (a, e)
Compute convective heat transfer coefficients in forced convection, natural
convection for internal flows & external flows. (a)
Know the fundamental mechanism involved in boiling and condensation.(a)
Know the design fundamentals for heat exchangers, which include the LMTD
and ε-NTU approaches.(a, c)
Understand radiation heat transfer and can compute radiation heat transfer
between black and non-black bodies.(a)
Prerequisites: Engineering Mathematics – I, Basic Thermodynamics, Fluid Mechanics
UNIT – I
Introduction: Basic Modes and laws of Heat transfer, thermal conductivity, Steady state Heat
Conduction, General conduction equation in Cartesian, Cylindrical and Spherical coordinates, initial
and boundary conditions.
One- dimensional heat conduction: Heat flow through plane wall , cylinder and sphere with
constant thermal conductivity , Heat flow through composite slab and Cylinders, Thermal resistance,
Electrical analogy, Thermal contact resistance, critical insulation thickness, Heat source systems-
Simple systems with uniform heat generation in slabs and cylinders.
Extended surfaces: Types, Applications, Fin materials, Heat transfer from fins with uniform cross
section, Fin efficiency and Effectiveness.

VR10
UNIT – II
Transient heat conduction: One dimensional lumped heat capacity systems.
Forced convection: Introduction, Principles of convection, Conservation of Mass and Momentum,
Differential equation of continuity, Energy equation, Hydrodynamic and thermal boundary layers,
concept of turbulence, Flow over bodies, Drag coefficient, Heat transfer coefficient, Empirical and
semi empirical relations for heat transfer in Laminar and Turbulent flows over a flat plate, Relation
between fluid friction and heat transfer in laminar & turbulent flow – Reynolds-Colburn Analogy,
Laminar flow heat transfer in a pipe, Turbulent flow heat transfer in a pipe- Empirical relations.
Phase Change: Introduction – Film wise & Drop wise Condensation, Boiling Curve.
UNIT – III
Natural convection: Approximate analysis for laminar film on a vertical plate, Correlations for
vertical plates, horizontal plates, vertical and horizontal cylinders, inclined surfaces.
Heat exchangers: Classification and type of heat exchangers, Flow arrangement, Temperature
distribution , Overall heat transfer coefficient, Fouling factor, LMTD method of Heat exchanger
analysis, correction for LMTD for use with multi pass and cross flow Heat Exchanger, Effectiveness -
NTU method for Heat Exchanger analysis.
UNIT – IV
Radiation: Fundamentals of Radiation: Basic Concepts and definitions, Absorptivity, Reflectivity,
Transmissivity, concept of Black body, Laws of Radiation, Kirchhoff's law, Planck's & Wein’s law,
Stefan Boltzman's law.
Radiant heat transfer: Heat Exchange by radiation between two finite parallel surfaces, Electrical
analogy, solid angle and Radiation intensity, Heat exchange by radiation between two finite black and
gray surfaces, shape factor, Radiation shields.
Learning Resources:
Text books:
1. Heat and Mass Transfer –R.C. Sachdeva New age publication-2009.
2. Heat transfer - J.P.Holman Tata Mc Graw-Hill, 9th Edition-2008.
3. Basic of Heat & Mass Transfer—D.S. Kumar 8th Edition 2010,S.K.Kataria & Sons
Reference books:
1. Heat Transfer- A Basic Approach Volume I-- N.Ozisik ,1985 TMH
2. A Text Book of Heat transfer - S.P.Sukhatme, 4th Edition, 2005 University Press Pvt.Ltd.
3. Introduction to Heat Transfer - lncropera and Dewitt, 6th Edition, 2011 John Wiley & Sons
Web references:
1. IIT video lecturers (NPTEL)
2. http://www.wisc-online.com/Objects/ViewObject.aspx?ID=SCE304
3. http://web.cecs.pdx.edu/~gerry/heatAnimations/sphereTransient/#TOC
4. http://rpaulsingh.com/animated%20figures/animationlisttopic.htm
5. http://www.slideshare.net/meenng/transfer-of-heat
6. http://www.phy.cuhk.edu.hk/contextual/heat/hea/heatp01_e.html
NOTE: Heat and Mass Transfer Data Book by Kothandaraman and Subramanian to be
allowed in the Examinations

VR10
ME 6005
ENGINEERING METROLOGY & MEASUREMENTS
Objectives: To provide the knowledge on different concepts of metrology, principles of

Gauges, Parameters of different measurands and application of instruments.

Outcomes:
Get familiarity with terminology and errors in measurement.(a)
Get acquainted with limits, tolerances and gauge design. (a,c,e)
Understand the principles of linear and angular measuring instruments. (a)
Understand the surface roughness terminology and types of various surface
roughness measuring instruments. (e,k)
Understand the strain measurement. (a,e,k)
Familiarize with temperature measuring instruments. (a,k)
UNIT – I
Metrology: Introduction, Elements of engineering measurements, standards of length; end and line
standards. Slip gauges, angle gauges, sine bars, spirit levels. bore gauges, straight edges
UNIT – II
Limits, fits and gauges: Theory of limits, Fits, Tolerances and their selection, Hole Basis and shaft
basis system, IS system of limits & fits, Simple problems. Interchangeability, Selective Assembly,
Limit gauges, Taylor’s Principle of limit gauging, plug gauges, Ring gauges and their applications.
UNIT – III
Comparators: Mechanical comparators- Read comparator, Sigma comparator, Solex pneumatic
gauge, electrical & electronic comparator, projectors, Tool Maker’s Microscope, Auto collimator,
angle dekkor
Measurement of surface finish: Surface texture, roughness, waviness, Indian standard terminology,
Various methods of measuring surface finish, Tomilson surface meter and Taylor Hobson Talysurf.
UNIT – IV
Strain measurement: Introduction, electrical resistance strain gauges principle, method of fixing and
bridge circuit for measuring strain gauges, gauge factor, Temperature compensation of strain gauge,
application
Temperature measurement: Liquid in glass thermometer, Bimetallic strip thermometer, Thermo
couple, Thermistry

VR10
Learning Resources:
Text books:
1. Metrology - R.K.Jain,3rd Edition,2009., Khanna publishers

2. Mechanical Measurements & Control Engineering by D. S. Kumar, 1st
Edition,1979.Metrololotian Book company Ltd.
Reference Books:
1. Engg.Metrology – D.M.Antony
2. A text book of Engg.Metrology – I.C.Gupta., Dhanapath rai publications
3. Hand Book of Industrial Metrology – ASTME.
4. Mechanical Measurements by T.G.Beckwith & N.L.Buck 3rd Edition 1982 Addison
Wesele Publication
Web references:
1. http://www.metrologymetro.com
2. http://www. emtoolbox.nist.gov/.
3. http://en.wikipedia.org/wiki/Metrology#Basics

VR10
ME 6051
FUELS & I.C ENGINES LAB
Objectives: To provide practical ways of determining the fuel properties and performance
evaluation of different types of I.C. Engines

Outcomes:
Measure the thermal properties of different fuels. (a,b)
Analyze the properties of various fuels and emission standards (b,h,j,k)
Determine the efficiency of compressor and blower. (a,b,h)
Analyze the performance and determine the operating characteristics of I.C
engines [2-stroke, 4-stroke, petrol, diesel] using rope brake, hydraulic and,
electrical dynamometers. (a,b,h,j)
Draw the valve and port timing diagrams of two and four stroke engines. (b,c)
Any Eight of the following
Fuels and models lab:

1. Redwood Viscometer I & II
2. Dead weight pressure gauge tester
3. Junker’s gas calorimeter
4. Abel’s Flash and Fire point tester
5. Canradson Carbon Residue Tester
6. Bomb Calorimeter
7. Two Stroke Petrol Engine (PTD)
8. Multi Cylinder Petrol Engine ( VTD )
I.C. Engines lab:

1. Single Cylinder 4-Stroke Diesel Engine
2. Twin Cylinder 4-Stroke Diesel Engine
3. Two Stroke Petrol Engine
4. Reciprocating Air Compressor
5. Blower Test Rig

VR10
ME 6052
MACHINE TOOL LAB
Objectives: To get familiarity with various machine tools and the mechanisms.
To enhance the practical approach towards machine tools.

Outcomes:
Get exposure to hand tools, equipments and machines. (b,c,k)
Categorize the choice and care of the tools (b,c,k)
Find acquainted with the types of motions. (b,c,k)
Understand the mechanisms of all the machine tools. (b,c,e,k)
Understand the usage of different types of machine tools. (b,c,k)
List of Experiments :
Turning
Multi-start threading, Drilling, Boring and Internal threading
Measurement of cutting forces using Dynamometer
Drilling & Tapping
Drilling and Tapping of Different threads on drilling machine
Milling
Key-way, Spur and Helical Gear Milling
Shaping
At least three models involving production of flat surface, Stepped surface, Cutting dovetail
and rectangular grooves.
Planing and Slotting
Working on Planning and Slotting Machines
Grinding
At least one model on surface grinder, cylindrical grinder or tool and cutter grinder.

VR10
ME 6053
COMPUTATIONAL METHODS LAB
Objectives: To train the basic features of MAT Lab. Software

To solve the Matrix calculations, numerical, algebraic, differential, partial
equations & Integrations using MAT lab.
Learning
Outcomes: At the end of the course the students will be able to
Understand basic commands in Mat lab (a)
Matrix calculations like Multiplication, Addition, Determinant, Inverse etc. (a,e)
Solve ordinary Partial differential equations (a,e,k)
Integrate & Develop 2-D plots (a,e,k)
List of Exercises:
1. Introduction of Mat lab
2. Basics of Mat lab
2. Mathematical operations on matrices.
(Addition, Multiplication, Division)

3. Transpose, determinant and inverse of a matrix.
4. Solutions of simultaneous algebraic equation.
5. Solution of ordinary differential equations.
6. Solution of partial differential equations
7. Numerical integration.
8. 2d-plots
References:
1. Matlab programming by Y.Virani Singh & B.B.Chaudhuri. PHI publications(2010).
2. Getting started with Mat lab-a quick reference for scientists & engineers by Rudra Pratap.
Oxford university press(2009).
3. an introduction to programming and numerical methods in Matlab by s.r.Otto, j.p.denier.

Springer publications(2007).

VR10
4. Ordinary & partial differential equations routines in Matlab-H.J.Lee & W.E.Schiesser.

champmans hall /CRC (2004).
5. Graphics and GUI’S with Matlab, 3rd edition by Patrick Marchand, O.Thomas Holland.
champmans hall /CRC (2004).
Web References:
1. http://www.math.ucsd.edu/~bdriver/21d-s99/matlab-primer.html
2. http://www.mathworks.in/academia/student_center/tutorials/launchpad.html
3. http://www.cyclismo.org/tutorial/matlab/
4. http://www.mathworks.com/matlabcentral/fileexchange?s_cid=wiki_matlab_17
Videos:
1. http://www.youtube.com/user/matlab?feature=results_main
2. http://www.youtube.com/watch?v=DPLBPdux6bs

VR10
ME 6054
TERM PAPER

Credits: 1
Practical : -
Objectives:
Provide students with an opportunity to develop in-depth expertise.
To improve the working relation between the student and teacher.
Guide students through the process of planning and executing a
substantial project.
Allow students the opportunity to teach among themselves.

Outcomes: Students will be able to familiarize with new technical topics and
participate in technical seminars and paper contests. (e,g,h,i,j)
Assessment and distribution of the marks are based on the academic regulation clause
10.2.4 of VR10

VR10
ME 7001
OPERATIONS RESEARCH
Objectives: To make use of optimum utilization of men, capital, material and machines

Outcomes:
Understand the usage Linear programming for the optimum allocation of
limited resources such as men, machines, materials and capital. (a,c,e)
Solve transportation problems to minimize cost and understand the principles
of assignment of jobs and recruitment polices. (a,c,e)
Solve game theory problems. (a,c,e)
Apply Queuing theory to solve problems of traffic congestion, counters in
banks, railway bookings etc. (a,c,d,e)
Solve problems of Scheduling and sequencing of production runs and develop
proper inventory policies. (a,c,d,e)
Apply PERT/CPM: [Project scheduling and allocation of resources] to
schedule and control construction of dams, bridges, roads etc in a optimal way.
(a,c,d,e,l)
UNIT – I
Introduction: Definition and Scope of Operations Research, Limitations of Operations Research,
Model building in Operations Research.
Linear programming: Mathematical formulation of the problem, Graphical method, Simplex
method, artificial basis technique, dual Simplex method. Degeneracy, alternative optima, unbounded
solution, infeasible solution.
UNIT – II
Transportation problem: Basic feasible solution by north-west corner method, Vogel’s
approximation method, assignment by inspection method. Finding optimal solution, degeneracy,
unbalanced transportation matrix.
Assignment problem: One-to-one assignment problem, optimal solution, unbalanced assignment
matrix.
Queuing theory: Queuing systems and their characteristics. M/M/1 : FCFS/ / and M/M/1 :
FCFS/ / N models.
UNIT – III
Project planning through networks: Arrow (Network) Diagram representation. Rules for
constructing an arrow diagram, PERT and CPM, Critical path calculations, earliest start and latest
completion times, Determination of critical path, determination of floats, Probability considerations
in project, cost considerations in project scheduling, crashing (least cost project scheduling).

VR10
UNIT – IV
Game theory: Optimal solution of two-person zero-sum games, the max-min and min-max principle.
Games without saddle points, mixed strategies. Arithmetic and algebraic methods, reduction by
dominance and average, method of sub games, graphical method.
Sequencing: Introduction, Job shop Scheduling, Flow shop Scheduling, Solution of Sequencing
Problem, Processing of n Jobs through two machines, Processing of n Jobs through m machines,
Scheduling Criteria’s.
Learning Resources:
Text books:
1. ‘Operations Research (units: I, IV)’S D Sharma, ‘Kedarnath, Ramnath & Co.,Meerut.16th
Edition,2009.Macmillian publishers.
2. Operations Research V K Kapoor.7th edition, 2001.S.Chand
Reference books:
1. Operations Research’ R Pannerselvam 2nd EditionPentice Hall of India Pvt Ltd-New
Delhi.2006
Web references:
2. http://en.wikipedia.org
3. http://coral.ie.lehigh.edu
4. http://books.google.co.in
5. http://www.universalteacherpublications.com/univ/ebooks/or/Ch1/origin.htm
6. http://www.wolfram.com/solutions/OperationsResearch/
7. http://www.informs.org/Journal/IJOC/Areas-and-Area-Editors
8. http://orion.uwaterloo.ca/~hwolkowi/intrstsites.html

VR10
ME 7002
DESIGN OF AUTOMOBILE COMPONENTS
Objectives: To study the design concepts of different types of suspensions systems,

clutches and brakes, I.C engine components and flywheel for an automobile.
To familiarize the students in employing different optimum algorithms for the
design of a machine element and predicting the overall failure and life of an
assembly of components using the concepts of reliability

Outcomes:
Design and develop different kinds of suspension systems such as coil and leaf
springs under different loading conditions. (a,c)
Analyze and design the clutches and brakes according to the requirement. (a,c)
Design the I.C engine components like piston, connecting rod,crankshaft and
flywheel for a greater range of conditions. (a,c)
Employ the best economical and safe design of a machine element using the
techniques of optimum design. (a,c,d,e)
Determine the probability of failure and life of a machine element using the
concepts of reliability. (a)
Prerequisites: Kinematics of Machines, Machine Dynamics, Design of Machine Elements, Design

of transmission Elements
UNIT – I
Springs: Introduction; Materials; Types of springs, Helical springs under axial load, Fatigue loading,
Torsion springs, Spiral springs, leaf springs.
UNIT – II
Brakes and Clutches:- Introduction to Brakes, Types, Analysis and design of block brakes, band
brakes, block and band brakes; Internal shoe brakes, external shoe brakes, pivoted shoe brakes,
Temperture rise, Friction materials, Clutches, Analysis and design of simple and multiple disc
clutches, cone clutches and centrifugal clutches, friction materials; comparison of brakes and clutches.
UNIT – III
I. C. Engine Components: Introduction, Design of trunk type piston, connecting rod and
crankshaft.
Optimum design: Optimization function of single variable and multi variables, optimization
techniques, Interval halving and Golden section methods, optimum design of tension bar for
minimum deflection, cost and weight, Torsion member for minimum deflection, cost and weight.

VR10
UNIT – IV
Flywheel: Introduction, construction, Torque analysis, solid flywheel, Rimmed flywheel, stresses in
rimmed flywheel, Design of flywheel.
Reliability and life expectances: Introduction, Method of achieving reliability, Series, Parallel and
series and parallel reliability, Analysis.
Learning Resources:
Text Books:
2. Machine Design by P.C. Sharma & D.K. Agarwal, S.K.Kataria & Sons,11th Edition,2006.
3. Singeresu S. Rao, "Engineering Optimization - Theory and Practice" New Age Intl.
Ltd.Publishers,3rd Edition, 2009.
Reference Books:
1. Mechanical Engg Design by Joseph Edward Shigley, Tata McGraw Hill book Co.8th
edition,2008.
2. Machine Design by R.K. Jain, Khanna Publishers,5th edition,1988.
Hand books to be allowed in university examination:

1. Design data book, P.S.G. College of Tech, Coimbatore
2. Design data book, Mahadevan & Balaveera Reddy - CBS Pub.
Web references:
3. http://www.pdftop.com

VR10
ME 7003
FINITE ELEMENT METHOD
Objectives: Development of numerical formulation to solve Engineering structural and

field problems with an intension to extension of the procedure to address
complicated problems that cannot be solved by classical analytical methods.

Outcomes:
Understand the philosophy of discretization of continuum (a, c, d , e)
Apply governing principles of the problem at element level and develop
element matrices. (a, e, j, k)
Assemble element matrices based on local-global connectivity to generate total
system equations .(a, e, j, k)
Impose boundary conditions and solve for unknown field variables (a, b, c, e,k)
Interpret results from the calculated field variables. (a, b, k)
Observe the symmetries in the system to minimize the geometry of FE model
(a, b, c, e, f, h)
Classify the problems as 1-D, 2-D and 3-D based on the system behavior (a, b,
c, d, e, f, i , h, k)
Analyze of linear structural and steady state heat transfer problems (a, b, c , e,
h)
Prerequisites: Mechanics of Materials, Advanced Mechanics of Materials, Heat Transfer
UNIT – I
Fundamental concepts: Analysis of 3-D stresses & strains, stress-strain relations, stress cubic,
principal stress calculations, potential energy and equilibrium, the Rayleigh-Ritz method, Galerkine’s
method.
UNIT – II
Basic concepts of F.E.M. and one dimensional problems : Fundamental concepts, Finite
Element Modeling, Coordinates and Shape functions, The Potential Energy Approach, Global
Stiffness Matrix and Load Vector, The Finite Element equations; Treatment of boundary conditions,
Examples of Axially Loaded Members.
Analysis of plane trusses: Introduction, Plane Trusses, Local and Global Coordinate systems,
Element Stiffness Matrix, Stress Calculations, Example of plane Truss with three members.
UNIT – III
Analysis of beams: Introduction, Potential Energy Approach, Element stiffness matrix for two
nodes, two degree of freedom for node beam element, load vector, simple beam problems.
Steady state heat transfer analysis: One Dimensional Heat transfer analysis of a Fin.

VR10
UNIT – IV
Two dimensional problems : Introduction, Plane Stress and Plane Strain, Finite Element Modeling,
Constant Strain Triangle (CST); Iso-parametric representation, Potential Energy Approach, Element
Stiffness, Force terms, Galerkin Approach, Stress calculation, Problem modeling and boundary
conditions, Examples of plane Stress and plane Strain problems with three degrees of freedom using
CST Element.
Steady state heat transfer analysis: Two dimensional steady state heat transfer analysis of a thin
plate.
Learning Resources:
Text books:
1. Introduction to Finite Elements in Engineering by Chandrupatla & Belegundu, PHI.3rd
Edition,2011.
Reference books:
1. Cook, Robert Davis et al, "Concepts and Applications of Finite Element Analysis" ,
Wiley, John & Sons,4th Edition,2007.
2. George R Buchanan, "Schaum's Outline of Finite Element Analysis", McGraw Hill
Company, 1995.
3. Finite Element Analysis by P. Seshu, PHI publications,2003.
Web References:
1. http://en.wikipedia.org/wiki/Finite_element_method
2. http://reference.wolfram.com/applications/structural/FiniteElementMethod.html
3. http://www.finite-element-method.info/

VR10
ME 7004
MANUFACTURING MANAGEMENT
Lecture : 3hrs/ week Internal Assessment: 30 Marks
Objectives: To impart the knowledge of various production systems.

To introduce the methods of applying scientific principles to solve problems
of forecasting, scheduling, inventory etc with optimum operating solutions.
To introduces various concepts of quality

Outcomes:
Familiarize with different types production systems and functions of
Production Planning and control.(c)
Apply to predict the demand accurately (a,c)
Plan the required Capacity using different strategies and develop a Master
production schedule.(a,c,l)
Ensure proper and better inventory control.(a,c,l)
Develop a MRP schedule.(c,l)
Diagnose quality problems and ensure better quality control.(a,c)
UNIT – I
Production systems: Continuous and intermittent production. Mass and flow production, batch
production, job order production, production functions. Production Planning & Control Functions
Forecasting: Forecasting variables, forecasting procedure, methods of forecasting: moving average,

least squares, simple exponential smoothing, linear regression, correlation coefficient, problems.
UNIT – II
Aggregate planning and scheduling: Long range, intermediate range and short range plans, the
aggregate planning problem, aggregate planning strategies
Master scheduling: Master scheduling formation: inputs and outputs. Master scheduling methods.
UNIT – III
Materials Management and Inventory Control : Functions of materials management, purpose of
inventories, types of inventories, relevant costs in inventory control, ABC, VED and XYZ analysis.
Economic order quantity (EOQ) models: Basic EOQ, economic production run length (ERL),
quantity discounts, safety stock, problems, P & Q Systems of Control.
Materials requirement planning (MRP): Importance of MRP and CRP, MRP system inputs and
outputs, bill of materials, MRP logic, MRPII, ERP.

VR10
UNIT – IV
Quality control: Tolerance limits of a process, control charts for variables: X and R charts. Control
charts of attributes, p-chart, c-chart, zero defect programs, problems.
Acceptance sampling – single sampling, double sampling and multi sampling plans for attributes,
OC curves, problems.
TQM, Demings Quality Philosophy, Taguchi Quality Philosophy.
Learning Resources:
Text books:
1. Operations Management – Joseph G. Monks 3rd Edition TMH,1987
Reference books:
1. Materials Management – Gopalakrishnan and Sudhakaresan
2. Quality Control – Dale H. Besterfield,1995 Prentice Hall
Web references:
1. www.transtutors.com
2. www.referenceforbusiness.com
3. www.prenhall.com
4. www.brighthub.com

VR10
ME 7005/1
MECHATRONICS

Objectives: To familiarize the different sensors & transducers, signal conditioning

techniques,
To understand the dynamic response of the system and usage of different
controllers.

Outcomes:
Recognize of different sensors,transducers,signal conditioning techniques (d)
Develop a system models like Mechanical, Electrical, Fluid & Thermal systems
(a,h)
Formulate Transfer function for different Systems.(a)
Understand the working principle of different controllers like Proportional,
Derivative, Integral, PI, PD, PID. (d,h)
Develop a PLC programming techniques with Microprocessor, ladder diagram
for different logic Gates (d)
Demonstrate case studies of Mechatronics systems like pick-and-palace robot.
(i)
Prerequisites: Basic Electrical & Electronics, Mathematics and Design of machine

elements.
UNIT – I
Introduction to Mechatronics
Sensors & Transducers: Introduction, performance terminology, classification of sensors, selection
of sensors.
Signal Conditioning: Introduction data acquisition – Quantizing theory, Analog to digital
conversion, digital to analog conversion.
Data Presentation Systems: Displays, Data presentation elements - i) Analog Chart recorders ii)
magnetic recording codes iii) Visual display unit, Systems measurement, Testing and Calibration.
UNIT – II
Basic System Models: Modeling of one and two degrees of freedom Mechanical, Electrical, Fluid
and thermal systems. Block diagram representations for these systems.
Dynamic Responses of System: Transfer function, Modeling Dynamic systems, first order systems,
second order systems
UNIT – III
Closed loop controllers: Continuous and discrete processes, control modes, Two step, Proportional,
Derivative, Integral, PID controllers.
Digital logic: Logic gates, Boolean algebra, Karnaugh maps

VR10
UNIT – IV
PLC : Introduction, basic structure, I/P, O/P, processing, programming, ladder diagrams, timers,
internal relays and counters, data handling, analogue input and output selection of PLC.
Design : Designing Mechatronics systems, possible design solutions, case studies of Mechatronics
systems – i) Pick and place robot ii) Timed switch iii) Bar code reader
Learning Resources:
Text books:
1. Mechatronics by W.Bolton ,Pearson Education India 3rd Edtion,2006.
Reference Books:
1. Mechatronics by HMT,1st Edition,2000.
2. Mechatronics by Mahalik,1st Edition,2003 TMH.
3. Introduction to Mechatronics – David and Alcaitore Michael B.Histand TMH, 4th
Edition ,2006.
Web References:
1. http://www.engr.sjsu.edu/sjlee/vendors.htm
2. www.engr.colostate.edu/~dga/mechatronics/resources.html
3. www.NI.com
4. www.cambridgemechatronics.com/contact/terms
5. www.pdf-free-download.com/mechatronics-labs.pdf
6. mechatronics.me.wisc.edu
Video references:
1. http://video_demos.colostate.edu/mechatronics/index.html#actuators
2. http://video.designworldonline.com/channel/MECHANICAL

VR10
ME 7005/2
AUTOMATIC CONTROL ENGINEERING
Objectives: To teach the methods to analyze the fundamental control systems and to
provide principles & working stability of systems
To analyze the Response of control systems,
To teach root locus analysis and PID Controls

Outcomes:
Understand open loop/closed loop systems with design control systems (a)
Develop of transfer function with block diagrams (a)
Represent dynamic systems like Mechanical, Electrical, thermal & fluid systems
(c,h)
Develop linear varying time response and also to analyze first & second order
systems (a)
Develop of Root Contour Plots (a)
Develop Body diagrams & polar plots and also to analyze PID controllers (d)
Prerequisites: Basic Electronics Engineering, Electrical Technology, Engineering Metrology &

Measurements
UNIT – I
Introduction to Control Systems:
Introduction-Examples of control Systems- Closed loop Control versus Open loop Control system-
Design of Control Systems.
Mathematic Modeling of Dynamic Systems:
Introduction- Transfer Function and Impulse Response Function- Block Diagram-Modeling in State
space.
UNIT – II
State-space Representation of Dynamic Systems:
Mechanical Systems- Electrical Systems- Liquid Level Systems- Thermal Systems- Linear Systems –
Linear time Invariable systems, Linear time Varying System.
UNIT – III
Transient-Response Analysis and Response of Control Systems:
Introduction- First Order System- Second Order System- Higher Order Systems- Routh’s Criterion,
Nyquist stability criterion, Application of the Nyquist criterion.
Root Locus Analysis:
Introduction- Root Locus Plot- General Rules for constructing Root Loci- Root Locus Analysis of
Control Systems- Root Contour Plots.

VR10
UNIT – IV
Frequency-Response Analysis:
Introduction-Bode Diagrams-Polar Plots-Closed loop Frequency Response- Experimental
Determination of Transfer Functions.
P I D Controls:
Introduction – Tuning Rules for PID Controllers- Modifications of PID Controllers – Two Degree
Freedom Controls.
Learning Resources:
Text books:
1. K. Ogata, Modern Control Engineering, Pearson Ed, 2002.
Reference books:
1. Gene F. Franklin et. al. Feedback control of dynamic systems, Pearson Ed. Asia 1998
2. Harison and Boilinger, Introduction to Automatic Control System Jolzn Wiley
Publication 1976
3. G. V. Reklatis, A. Ravinran and K. M. Ragsdell, Engineering Optimization: Methods and
applications, Interscience 1983.
4. Automatic Control Systems, by Benjamin C. Kuo. 9th edition,2009, Wiley
5. Mechanical Measurements, by R.S.Sirohi, H.G. Radha Krishna, 3rd edition1991 New age
International,
6. Control Systems Engineering by Nagrath/Gopal, 2006 New age international

VR10
ME 7005/3
HYDRAULIC AND PNEUMATIC SYSTEMS
Objectives: To provide the working principles of various hydraulic and pneumatic systems
and their control

Outcomes:
Understand the working Principals of Hydraulic pump, actuators, flow control
valves (a,c)
Understand basic principles of pressure control of hydraulic systems (a,c)
Understand the operation of a fluid power system with emphasis on the design
and engineering of the system components (a,d)
Understand basic principles and control of pneumatic systems (a,c)
Identify faults in the hydraulic and pneumatic systems and able to trouble shoot
the system.(a,d,k)
Prerequisites: Fluid Mechanics
UNIT – I
Oil hydraulic systems: Hydraulic power generators-selection and specification of pumps
Hydraulic actuators: Linear and Rotary Actuators-Selection and Specification
UNIT – II
Control and regulation elements: Pressure-direction and flow control valves
Introduction to Pneumatic Systems: Pneumatic fundamentals, brief description of control
elements
UNIT – III
Hydraulic circuits: Reciprocation, quick return, Sequencing synchronizing circuits-accumulator
circuits-industrial circuits-punching press circuit-hydraulic milling machine, shaper
Pneumatic circuits: Pneumatic circuits- Basic pneumatic circuit, Quick exhaust circuit, feed control
circuit and Time delay circuit
UNIT – IV
Maintenance of fluidic circuits: Fault finding-hydro pneumatic circuits, Introduction to PLC, Basic
structure of PLC, Timers, counters, PLC controlled hydraulic and pneumatic systems.

VR10
Learning Resources:
Text books:
1. Antony Espossito, "Fluid power with Applications", Prentice Hall, 1980
2. R Srinivasulu, “Hydraulic Pneumatic Controls”, 2nd edition, TMH, 2009.
Reference books:
1. Andrew Parr, "Hydraulics and Pneumatics", (HB), Jaico Publishing House, 1999
2. Bolton. W. "Pneumatic and Hydraulic systems", Butterworth - Heinneman, 1997
Web references:
3. www.hydraulicspneumatics.com/
4. www.waterengr.com/
5. www.pumps.org/

VR10
ME 7005/4
OPTIMIZATION TECHNIQUES
Objectives: To impart knowledge of optimizing the performance of the system using

various linear and non linear models.
To introduce the knowledge of developing a best replacement policy and
elements of a queuing model.

Outcomes:
Apply the various linear programming techniques for optimal allocation of
limited resources such as machine, material and money. (a,b,e)
Familiarize with the various non linear programming procedures. (a,e)
Solve Integer programming problems by Cutting – Plane Algorithms branch
and bound method. . (a,e)
Solve linear programs by using dynamic programming (a,e,l)
Develop optimum replacement policy and Solve sequencing problems. (a,l)
Familiarize with the basic elements of a Queuing model (a)
UNIT – I
Introduction: Engineering Applications of Optimization, Problem formulation – Objective
function, constraints and types – Equality and inequality, Classification of Optimization problems,
Single variable optimization, Multi variable optimization, Constrained and Unconstrained
optimization.
Linear Programming : Introduction, Formulation of the linear programming problem (LPP),
Definitions, motivation to simplex method, Simplex Algorithm, Two phase simplex method, Revised
simplex method, Quality in LP and Sensitivity.
UNIT – II
Optimal solution by north west corner method- least cost method – vogels approximation method –
optimality test – MODI method.
Assignment problem – formulation – Hungarian method -unbalanced assignment problem.
UNIT – III
Non Linear Programming: Unconstrained nonlinear optimization – Direct elimination procedures,
Direct climbing procedures, constrained nonlinear optimization.
Integer Programming: Cutting – Plane Algorithms, Branch and Bound method. Introduction to
geometric programming
Dynamic Programming: Elements of Dynamic Programming model, Problem of dimensionality in
Dynamic Programming, Solution of linear programs by Dynamic Programming.

VR10
UNIT – IV
Replacement Analysis: Replacement of items that deteriorate with time – value of money changing
with time –not charging with time – optimum replacement policy – individual and group replacement.
Sequencing problem: models with n jobs with 2 machines – problem with n jobs with 3 machines.
Queuing Theory: Basic elements of Queuing model, Poison and exponential distributions, single
server and multi server models, Queues with combined arrivals and departures. Queues with
priorities for services.
Learning Resources:
Text books:
1. ‘Operations Research (units: I, IV)’SD Sharma,‘Kedarnath,Ramnath & Co.,Meerut.16th
edition 2009.
2. Operations Research V K Kapoor.7th edition 2001.
Reference books:
1. Operations Research’ R Pannerselvam 2ne Edition 2006, Pentice Hall of India Pvt Ltd-
New Delhi.
Web resources:
1. http://www.universalteacherpublications.com/univ/ebooks/or/Ch1/origin.htm
2. http://www.wolfram.com/solutions/OperationsResearch/
3. http://www.informs.org/Journal/IJOC/Areas-and-Area-Editors
4. http://orion.uwaterloo.ca/~hwolkowi/intrstsites.html

VR10
ME 7005/5
INDUSTRY NEED BASED ELECTIVE
Lecture 4 hrs/ Week Internal Assessment: 30 Marks

Tutorial - Semester End Examination: 70 Marks
Practical - Credits: 3
Objectives: To bridge the gap between academia and industry

To provide hands-on experience on new technologies
To prepare the students for current industry requirements

Outcomes:
Understand the current needs of the industry. (a,f,i,j)
Engage in life-long learning. (a,i)
Apply techniques, skills, and modern engineering tools. (a,b,c,d,j,k)
Analyze and solve the problems of the society. (a,c,g)
The syllabus will be decided in consultation with industry and BoS members based on
the proposals.

VR10
ME 7006/1
ENERGY RESOURCES & UTILIZATION
Objectives: To impart knowledge of various conventional and nonconventional energy

Resources, technology for conversion of energy and power plant economics.

Outcomes:
Identify various conventional energy resources(a,j)

Understand the working principle of various energy conversion system(a)
Familiarize power plant economics and power tariffs(a)
Understand impact of power plant effluents on environment (a,i)
Identify different non-conventional energy resources and their utilization(a,h)
Prerequisites: Applied Thermodynamics, I.C. Engines and Gas Turbines, Hydraulic Machines
UNIT – I
Introduction: Various Energy Sources, Types of power plants
Hydro electric power plant: Hydrology, rainfall, runoff and their measurement, hydrograph, flow
duration curve, mass curve and calculation of storage capacity, site selection of hydro plant, different
types of hydro plants.
Diesel and gas turbine power plants: classification, main components of plant, plant layout,
application and comparison with other plants.
UNIT – II
Thermal power plant: general lay out, fuels coal analysis, coal handling, burning of coal-stoker and
pulverized systems, ash handling systems, ESP, need for draught in thermal plants, high-pressure
boilers,condensers,cooling ponds and towers(wet and dry types), dearation.
UNIT – III
Nuclear power plants: Principles of release of nuclear energy; Fusion and fission reactions. Nuclear
fuels used in the reactors. Multiplication and thermal utilization factors. Elements of the nuclear
reactor; moderator, control rod, fuel rods, coolants. Brief description of reactors of the following
types-Pressurized water reactor, boiling water reactor, Sodium graphite reactor, Fast Breeder reactor,
Homogeneous graphite reactor and gas cooled reactor, Radiation hazards, Shielding, Radio active
waste disposal.
Fluctuating loads on power plants: Various performance factors (load factor,diversityfactor, use
factor etc...) .
Power plant economics: fixed costs, operating costs, cost per KWh, comparison of fixed and
operating costs of hydro, thermal, nuclear plants, power tariffs.
Pollution and control: Introduction, effluents from power plants and impact on environment-
pollutants and pollution standards-methods of pollution control.

VR10
UNIT – IV
Solar energy: solar collectors, solar energy storage, solar ponds , solar energy utilization and
applications.
Wind energy: Basic principle, different types of wind mills, wind energy conversion systems, other
applications.
Geo-thermal power: Sources, energy conversion systems, potential in India.
Bio-mass energy: Sources, conversion systems
Otec: ocean thermal energy conversion systems, introduction to tidal power.
Direct energy conversion systems: fuel cells, MHD, Solar cell.
Learning Resources:
Text books:
1. Power Plant Engineering - G.R.NAGPAL - khanna publications,15th Edition,1996.
2. Power Plant Engineering - P.K.Nag – Tata McGraw hill , 3rd Edition.
3. Non Conventional Energy Resources - G.D.Rai -khanna publications 4th Edition
Reference books:
1. Power Plant Technology - M.M. EL Wakil TMH, 1984
2. Principles of Energy Conversion - A.W.Culp, TMH,1979
Web resources:
1. en.wikipedia.org/wiki/Thermal_power_station
2. www.world-nuclear.org/info/inf32.html
3. en.wikipedia.org/wiki/Hydroelectricity
4. en.wikipedia.org/wiki/Gas_turbine
5. www.renewable-energy-sources.com/
6. www.grist.org/article/the-economics-of-power-plant-construction/

VR10
ME 7006/2
REFRIGERATION & AIR CONDITIONING
Objectives: To make students familiar with basic concepts of various Refrigeration and
Air-conditioning methods and analysis of different Air-conditioning systems.
To expose students to various types of Refrigeration and Air-conditioning
applications

Outcomes:
Understand and analyze air refrigeration, simple and complex vapor
compression refrigeration systems and their subsystems. (a,c,e)
Understand the operation of various devices of VCR system and their effect
on the performance of whole refrigeration system (a,c)
Analyze the aqua ammonia and LiBr absorption refrigeration and understand
their merits as alternatives to VCR systems. (a,c,h,j)
Select the most appropriate refrigerant for a given cooling application and
understand the impact of refrigerants on the environment (h,i,j)
Understand thermodynamics of air –vapour mixtures and various A/C process
and presenting them on psychrometric chat. (a,c)
Understand various A/C systems and heat pump circuits and using them in
combination to design real world heating & cooling needs (a,c,e,h,j)
Prerequisites: Basic Thermodynamics, Applied Thermodynamics, Heat Transfer
UNIT – I
Introduction to refrigeration: Necessity and applications, unit of refrigeration and C.O.P,
mechanical refrigeration, types of ideal cycle of refrigeration, Refrigerants- desirable properties,
commonly used refrigerants, nomenclature.
Air refrigeration: Bell Coleman cycle and Brayton cycle, Open and Dense air systems, Actual
refrigeration system, refrigeration needs of aircrafts, adoption of air refrigeration, Justification, types
of systems, problems.
UNIT – II
Vapour compression refrigeration: Working principle, essential components of plant, simple vapor
compression refrigeration cycle, Multi pressure systems – multistage compression, multi evaporator
system, Cascade system, use of p – h charts, problems.
System components: Compressors- general classification, comparison, advantages and

disadvantages, Condensers - classification, working, Evaporators - classification, working, Expansion
devices - types, working.
UNIT – III
Vapour absorption system: Calculation of max COP, description and working of NH 3 - water
system, Li - Br, H2O system, principle of operation of three fluid absorption system and salient
features.

VR10
Steam jet refrigeration system: Principle of working, application, merits and demerits.
Non-conventional refrigeration methods: Principle and operation of thermoelectric refrigerator

and Vortex tube or Hirsch tube.
UNIT – IV
Introduction to air conditioning: Psychrometric properties and processes, sensible and latent heat
loads, need for ventilation, infiltration, concepts of RSHF, GSHF, ESHF & ADP, concept of human
comfort and effective temperature, comfort air conditioning, industrial air conditioning requirements,
air conditioning load calculations.
Air conditioning systems: classification of equipment, cooling, heating, humidification and
dehumidification, filters, grills and registers, deodorants, fans and blowers, heat pump, heat
sources, different heat pump circuits, application.
Learning Resources:
Text books:
1. Refrigeration and air conditioning - C. P. Arora. Tata Mc Graw-Hill, 7 th Print,2006.
2. Refrigeration and Air conditioning - Manohar Prasad.New age international (P) ltd.,Ist
Edition,2002.
3. A course in refrigeration and air conditioning - S. C. Arora, Domkundwar.3rd
Edition,1994,
Reference books:
1. Principles of Refrigeration - Dossat., 4th Reprint 1997,Pearson Education Ltd.
2. Refrigeration and air conditioning - Stoecker, 1958, TMH
3. Refrigeration and Air conditioning Data book by Domkundwar& Domkundwar
Web Resources:
1. http://www.refrigerationbasics.com/index.htm
2. http://www.howstuffworks.com/ac.htm
3. http://www.ashrae.org
4. http://www.taftan.com/thermodynamics/AIRCOND.HTM
5. http://www.wisegeek.com/how-does-air-conditioning-work.htm

VR10
ME 7006/3
COMPUTATIONAL FLUID DYNAMICS
Objectives: To expose the student to the governing equations required for CFD and their
mathematical behavior, grid generation principles and make aware of solution
techniques and computer codes

Outcomes:
Formulate Analyze and Verify fluid, thermal systems analysis problems. (a,c,e)
Understand the structure and operation of commercial CFD software. (k)
Determine the velocity field, pressure distribution and heat transfer rates on the
boundaries of interior and exterior flows. (a,c,e)
Apply some of the popular FD techniques in the solution of fluid flow
problem (a,c,e)
Prerequisites: Basic Thermodynamics, Fluid Mechanics, Heat Transfer, Engineering Mathematics –

I, Engineering Mathematics – II, Engineering Mathematics – III
UNIT – I
Introduction:-CFD as a design tool, as a research tool, impact of CFD, Applications.
Governing equations: - Continuity, Momentum and Energy equations in 3 Dimensions,

Navier-Stokes equations, Single Generic Integral form equations for Continuity, Momentum and
Energy.
UNIT – II
Discretization:-Basic aspects of discretization, Techniques used--Finite Difference, Finite Volume
and Finite Element, comparison of above, difference equations, Explicit and Implicit approaches.
UNIT – III
Grid generation and transformation:-Generation of grid, Transformation of non- uniform grids,
General transformation of equations, form of governing equations suitable for CFD, Compressed
grids, Boundary filled coordinate systems—Elliptic grid generation, Adaptive grids, Modern
developments in grid generation.
UNIT – IV
CFD techniques:-Introduction, LAX-WENDORFF technique, MACCORMICK technique,
CRANK-NICHOLSON technique, Relaxation technique, ADI technique, suitability for different
conditions. Aspects of numerical dissipation and dispersion.

VR10
Learning Resources:
Text books:
1. Computational Fluid Dynamics, Basics with Applications—ANDERSON Jr.-MGH, 5th
Edition,1995.
2. Numerical Heat Transfer and Fluid Flow—PATANKAR-Hemisphere, NY, Volume 53,
2004.
Reference books:
1. Computational Fluid Dynamics for Engineering—HOFFMAN K.A. - Engineering
Education System, Austin, TX, 1989
Web resources:
1. www.cfd-online.com
2. Fluent Inc. Product Documentation
3. http://courses.cit.cornell.edu/fluent/index.htm
4. http://www.flow3d.com/index.html

VR10
ME 7006/4
GAS DYNAMICS
Objectives: This course aims to apply the fundamental principles of Fluid Dynamics and
Thermodynamics to understand, analyze and solve basic problems of Subsonic
and Supersonic flows of compressible fluids with Friction and Heat transfer

Outcomes:
Understand the physical origin of equations of compressible 1-D flows. (a)
Analyze 1-D flows including shock waves, heat addition and friction. (a,c,e)
Understand the concept of Mach number and how it relates to compressibility
effects, typical flow properties and wave propagation. (a,c)
Understand and analyze the effect of shock waves on compressible flows. (a,c)
Prerequisites: Basic Thermodynamics, Fluid Mechanics
UNIT – I
Definitions and basic Relations: Energy equation for a flow processes, stagnation- pressure,
density, temperature, velocity, Mach number, effect of mach number on compressibility.
Rate equations for a control volume: Continuity equation, Navier stokes equations, aerofoil theory,
boundary layer, boundary layer separation criterion.
UNIT – II
Isentropic flow with variable area: Comparison of isentropic and adiabatic processes, Mach
number variation stagnation and critical states, area ratio as function of Mach number, mass flow rate,
flow trough nozzles.
Flow with friction: flow in constant area duct with friction- Fanno Line, Fanno flow
equations,Variation of flow properties, variation of Mach number with duct length.
UNIT – III
Flow with heating or cooling in ducts: Governing equations, Rayleigh curve, Rayleigh flow
relations, heating in subsonic and supersonic flows.
Flow with Normal shock waves: Development of a shock wave, governing equations, Pandtl-
Meyer relation, Static pressure, temperature and density (the Rankine-Hugoniot equations) ratios
across the shock waves, determination of Mach number of supersonic flows.
UNIT – IV
Flow with Oblique shock waves: Nature of flow through oblique shock waves, fundamental
relations, Prandtl’s equation, Rankine-Hugoniot equation, variation of flow parameters, oblique shock
relation from the normal shock equations.
Methods of measurement: Pressure measurement, Temperature, Density, Velocity, Hot-wire
anemometer, Wind tunnels.

VR10
Learning Resources:
Text books:
1. S.M.Yahya, “Compressible Flow”, 4th Edition New age science 2009
2. E.Radhakrishnan, Gas Dynamics, PHI Publishers,5th printing,2005.
Reference books:
1. John D.Anderson, Jr. “Modern Compressible Flow”, 2nd Edition,1990 McGraw-Hill
2. Camhel and Jennings, “Gas Dynamics”, McGraw-Hill
Web resources:
1. http://www.adl.gatech.edu/classes/gasdyn/gasdyn01.html
2. http://web.ics.purdue.edu/~alexeenk/GDT/index.html
3. http://www.nd.edu/~powers/ae.360/notes.pdf
4. Books available at college web 152.152.1.100

VR10
ME 7006/5
OPEN ELECTIVE



Outcomes:
Understand the current needs of the industry. (f,i,j)
Engage in life-long learning. (i)
Apply techniques, skills, and modern engineering tools. (b,c,d,j,k)
Analyze and solve the problems of the society. (c,g)
Prerequisite :--------
The syllabus will be decided in consultation with industry and BOS members based on
the proposals.

VR10
ME 7051
HEAT TRANSFER LABORATORY
Objectives: To make the student understand the experimental approaches/methods in

heat transfer applications.
To provide necessary skills to conduct experiments in an accurate manner and
in safe environment.

Outcomes:
Perform diverse experiments in the areas of conduction, convection and
radiative heat transfer. (b,c,k)
Familiarize with instrumentation used for heat transfer experiment. (b)
Apply the concepts from heat transfer theory. (a)
Analyze experimental results and their uncertainties. (b)
Represent and discuss experimental results effectively using graphical methods.
(b,k).
Identify the procedures for finding material constants in the area of heat
transfer. (e)
Any Eight Experiments of the following
1. Refrigeration Test Rig

2. Air Conditioning Test Rig
3. Heat Exchanger – Parallel Flow
4. Heat Exchanger – Counter Flow
5. Composite Slab / Metal Rod
6. Critical Heat flux Apparatus
7. Emissivity Apparatus
8. Pin fin – Natural Convection
9. Pin fin – Forced Convection
10. Insulating powder Apparatus
11. Dropwise and filmwise condensation Apparatus
12. Forced Convection Apparatus
13. Stefan – Boltzmann’s Apparatus
14. Lagged pipe Apparatus
15. User defined design based experiment.

VR10
ME 7052
DESIGN & METROLOGY LABORATORY

Objectives: Provide the breadth and depth of the field of Design and Metrology.
To familiar with the basic principles of metrology.
To get acquainted with the use of design equipment through design
experiments.

Outcomes:
Design lab:
Evaluate the time period of oscillations of simple and compound pendulums.

(a,b,c,e,k)
Study of torsional vibration of single and double rotor shaft system.. (a,b,c,e,k)
Understand the gyroscopic effect of moving bodies (a,b,c,e,k)
Determine stress in the material by using photo elastic bench. (a,b,c,e,k)
Study the whirling of shafts under different boundary conditions. (a,b,c,e,k)
Metrology Lab:
Understand the procedures to measure the internal taper of bore gauge (b,c,e,k)
Analyze the some of the tool angles in tool signature by using tool maker’s
microscope. (b,c,e,k)
Understand the procedure for setting the given object to a required angle using
sine bar. (b,c,e,k)
Utilize profile projector in estimation of thread profile parameters. (b,c,e,k)
Measure the effective diameter of thread profile by using the three wire
method. (b,c,e,k)
Understand the procedure for measuring the external taper for the given taper
gauge. (b,c,e,k)
Any Twelve Experiments of the following
1. Measuring internal diameter using bore dial gauge

2. Measuring gear tooth thickness using gear tooth vernier
3. Measuring angles using universal bevel protractor
4. Measuring external diameters using micrometer and plotting x, r charts.
5. Measuring different elements of a thread using profile projector.
6. Measuring linear and angular dimensions of a tool using tool -makers
microscope.
7. Measurement of surface finish using surf tester
8. Measuring effective diameter of the thread using three wire method
9. Measurement of cutting forces using dynamometer on a lathe machine

VR10
10. Measurement of cutting forces using dynamometer on a drilling machine

11. Alignment test on a lathe machine
12. Alignment test on a milling machine
13. Alignment test on a drilling machine
14. Alignment test on a cutter and tool grinder
15. Vibration measurements.
16. Gyroscopes
17. Balancing
18. Temperature, strain and displacement measurements
19. Speed measurement
20. Force & torque measurement
21. Use of comparators
22. Measurements using photo elastic bench.
23. User defined design based experiment.

VR10
ME 7053
MINI PROJECT

Tutorial : 1hr/week Semester End Examination: 50 Marks
Objectives: To gauge the ability of the student in transforming the theoretical

knowledge studied into a working model of a computer / information
system.
For enabling the students to gain experience in analyzing and executing
of a small project to acquire the necessary confidence to carry out main
project in the final year

Outcomes:
Identify, formulate and solve theoretical or practical engineering problems
of simple nature
(a,e,f,g,h,i,j)
10.2.4 of VR10

VR10
ME 8001
COMPUTER AIDED MANUFACTURING
Objectives: To introduce the concepts of automation in manufacturing and direct

& indirect applications of computers in manufacturing.
To provide knowledge about the components of Numerical control
systems, programming codes & concepts, features of CNC & DNC,
Adaptive control, Computer Aided Process Planning [CAPP], Group
Technology [GT] and applications & benefits of Flexible
Manufacturing System [FMS].

Outcomes:
Understand the NC applications, Advantages & Disadvantages of NC
systems (a,c)
Classify the NC systems & NC co-ordinate systems, CNC, DNC. (a,c)
Generate NC part programming (a,c,k) and also to generate APT
language programming
Develop Process planning (a,c,e)
Generate code for cellular manufacturing & group technology (a,c)
Understand Allocations & benefits of FMS (a,c,e)
Prerequisites: Metal Cutting & Machine Tools
UNIT – I
Numerical control in production systems: Need for numerical control, components of NC systems,
Classification of NC systems, Punched tape, Tape format, NC co-ordinate system, NC Applications,
Advantages and disadvantages of NC machines.
UNIT – II
Computer control of NC machines: CNC concepts, Advantages of CNC, Direct numerical
control, types, advantages, adaptive control machining
Manual part programming: Introduction, Manual part programming, codes & concepts, length
compensation, radius compensation, canned cycles, Simple programming examples.
UNIT – III
Computer assisted part programming: Advantages of Computer assisted part programming,
APT language, geometry, motion statements, Macros, Simple programming examples.
Computer aided process planning: Types of Computer Aided Process Planning. Retrieval –
Type Process Planning Systems, Generative Process Planning Systems, Benefits of CAPP.
UNIT – IV
Group technology: Introduction, Part Families, Parts Classification and Coding, Different Parts
Classification and Coding Systems, Cellular Manufacturing, Composite Part Concept, Benefits of
Group Technology.

VR10
Flexible manufacturing systems: Introduction, Types of FMS, FMS Layout Configurations,

FMS Applications and Benefits. Introduction to Computer Integrated Manufacturing.
Learning Resources:
Text books:
1. Automation, Production Systems and CIM by Mikel P. Groover. Prentice Hall of India,
Delhi, 1995,2nd Edition.
Reference books:
1. CAD/CAM Mikel P. Groover. Prentice Hall of India, Delhi, 1995,3rd Editon.
2. Numerical Control & Computer Aided Manufacturing – T.K.Kundra, P.N.Rao &
N.K.Tiwari. 1988,TMH
3. Computer Aided Manufacturing - T.K.Kundra, P.N.Rao & N.K.Tiwari. 1998, TMH
Computer Integrated Design and Manufacturing, by David D.Bedworth, Mark
R.Henderson & Philip M.Wolfe, McGraw-Hill Book Company, Singapore.
Web References:
1. http://www.enotes.com/computer-aided-design-cad-computer- aided
2. http://www.britannica.com/EBchecked/topic/130575/computer-aided-manufacturing
3. http://en.wikipedia.org/wiki/Computer-aided_design#Overview
Video lessons:
1. http://www.youtube.com/watch?v=83rhQ6oehIc
2. http://www.metacafe.com
3. http://www.youtube.com/watch?v=nvZBtJ-ncEM

VR10
ME 8002/1
COMPUTER AIDED DESIGN

Objectives: To introduce the fundamentals of CAD, computer systems, computer

graphics, hard ware of design work station and graphics software
To familiarize with the usage of data exchange software & Analysis of graphic
entities algorithms
To know the importance of the Geometric transformations and the
windowing & clipping operation for graphic entities

Outcomes:
Understand the Importance of design work station, its utility advantages of
computer aided design over traditional design (a,d)
Generate Algorithms for different graphic primitives like Line, circle, ellipse
etc. (a,d)
Generate different curves like B-spline, Cubic spline, Bezier curve etc (a,d)
Solve different problems using Graphic transformations like Translation,
scaling, Rotation, mirror & shearing (a,d)
Understand various graphics standards like IGES, PHIGS, GKS etc (a,d)
Understand and apply windowing algorithms & view port algorithms (a,d)
Prerequisites: Design of Machine Elements, Design of transmission Elements, Design of

Automobile Components
UNIT - I
Introduction: Fundamentals of CAD, Design process, Applications of computer for design, Benefits
of CAD, Design Workstation, Graphic terminal.
Computer systems: CPU, Categories of Computer, Mass Storage Devices, Input and Output
Devices. Data representation, Programming Languages, Operating system, System Configuration.
UNIT - II
Computer aided design system hardware: Graphics Input Devices – Light pens, Analogue
devices, Keyboard devices, Graphics Display Devices – CRT devices, Plasma Panel Display devices,
Pen Plotter and other graphics output devices, CAD System Configuration.
UNIT – III
Computer aided design system software: Operating System, Graphics System, Graphics Database
structure and handling, Operating features, Symbols, Macros, Editing facility. Graphics Standards,
GKS and CORE, GKS-3D and PHIGS, IGES.
Primitives: Point Plotting, Drawing of Lines, Line drawing algorithms, DDA algorithm, Bresenham’s
Circle algorithm.

VR10
UNIT - IV
Geometric transformations: Co-ordinate system used in Graphics and Windowing, Viewport, 2-D
Transformations, Scaling, Translation, Rotation, Shearing. Homogeneous Transformations,
Combination Transformations, Clipping, 3-D Transformations.
Learning Resources:
Text Books:
1. CAD/CAM by Mikel P.Groover and Emory W.Zimmers,Prentice Hall of India , Delhi,3rd
Edition-2007.
2. Computer Aided Design and Manufacture by C.B.Besant, and C.W.K.Lui, Affiliated East –
West Press Pvt Ltd, New Delhi. 3rd Edition-2007.
References:
1. CAD/CAM by Ibrahim Zied, 5th Re print-2002. TMH,
Web References:
1. http://en.wikipedia.org
2. http://www.learnerstv.com
3. http://www.caddprimer.com/
4. http://www.compinfo-center.com/cad/cad.htm
5. http://www.srikumar.com/cad/cad.html
6. http://www.tenlinks.com/CAD/reference/directories.htm
Video Reference:
1. http://blog.capinc.com/2010/06/convert-to-a-section-view/
2. http://www.solidsmack.com/design-resources/solidworks-lamborghini-gallardo-car-tutorial/

VR10
ME 8002/2
AUTOMOBILE ENGINEERING

Objectives: To impart the knowledge of Power plant of an automobile and necessary fuel
supply systems.
To provide essentials of transmission systems from power plant to road
wheels.
To make the students familiar with the auxiliary systems

Outcomes:
Analyse complete functionality of petrol and diesel engines (a,j)
Analyse complete details & working of fuel supply systems in automobile
vehicle and modern trends in fuel supply systems. (a,j)
Understand necessity and working of cooling system, lubrication, electrical and
starting systems. (a,d)
Understand systems that are transmitting power from prime mover of
automobile to the road wheels. (a,j)
Familiarize with the systems for stability of an automobile. (a)
Understand the control systems of an automobile. (a)
Prerequisites: I.C.Engines
UNIT – I
Introduction: Classification of vehicles – applications, options of prime movers, transmission and
arrangements.
Engine: Engine Classifications - Number of strokes, cylinders, types of combustion chambers for
petrol and diesel engines, DTSI, valves, valve arrangements and operating Mechanisms (SOHC &
DOHC), Piston - design basis, types, piston rings, firing order, Crankshaft, Flywheel
Fuel supply systems for petrol and diesel engines: Fuel pumps- Mechanical and Electrical
Diaphragm pumps, Air and Fuel Filters, Fuel injection systems for Diesel and Petrol Engines,
(CRDI), Electronic Fuel injection-MPFI System, super chargers, Mufflers, Catalytic Converter.
UNIT - II
Cooling systems for i.c. engines: Need for cooling system, Air, evaporative cooling and water
cooling-Thermo-syphon and forced circulation, radiator, Thermostat, Antifreeze solutions.
Lubricating systems for i.c. engines: Splash, Petroil, Pressure & Dry sump lubrication systems, oil
filters, Crankcase ventilation.
Electrical system: Ignition system, Spark plugs, Electronic Ignition, Alternator, cutout, Current and
voltage regulators, starting motors-Bendix Drive Mechanism, lighting, instruments and accessories.

VR10
UNIT – III
Chassis & transmission systems: Introduction to Chassis & Transmission, Clutches – Single-plate
and Multi-plate clutches, Centrifugal clutches, Fluid Fly Wheel, Cone Clutch actuating mechanisms.
Transmission: Gear Box - Theory, Four speed and Five Speed Sliding Mesh, Constant mesh &
synchromesh type, selector mechanism, automatic transmission, overdrive, propeller shaft,
differential - principle of working.
UNIT - IV
Suspension systems: Need for suspension systems, springs, shock absorbers, axles – front and rear,
different methods of floating rear axle, front axle and wheel alignment.
Vehicle control: steering mechanisms and power steering, types of brakes and brake actuation
mechanisms (air and hydraulic), Disc Brakes, Anti-lock braking system, Air bags. Introduction - Tyres
& retread.
Learning Resources:
Text books:
1. Automobile Engineering - G.B.S. Narang,1989.5th Edition, Khanna Publishers.
2. Automobile Engineering - Vol I & II - Kirpal Singh,1st edition,2009. Standard
publishers
Reference books:
1. Automotive Mechanics - Joseph Heitner 2nd Edition 1967, Van Nastrand Rehinhold
2. Automobile Engineering – R.B. Gupta 3rd edition 1982,satya prakashan
Web references:
1. www.gec.ac.in/~bsm/automobile/automobile.html
2. http://auto.howstuffworks.com/engine2.htm
3. www.carbibles.com/steering_bible.html
4. www.educypedia.be/education/carjava.htm

VR10
ME 8002/3
EXPERIMENTAL STRESS ANALYSIS
Objectives: Development of relations between deformations, strains and stresses and

learning of various experimental techniques like strain gauges, photo-elasticity,
brittle coating and Moire’s method to test the structural behavior in terms of
stability, strength and stiffness.

Outcomes:
Understand the relations between deformations, strains and stresses in a loaded
structure. (a,d,e)
Idealize the structural analysis problems to 1-D, 2-D and 3-D models (a,d,e)
Understand various strain measurement methods and their applications
(a,b,c,d,h,j,k)
Apply light theories for structural analysis (a,b,c,e,k)
Understand non-destructive methods of structural analysis (a,b,f,i,k)
Prerequisites: Mechanics of materials
UNIT – I
Introduction to theory of Elasticity:- Stress at a point, stress equations of equilibrium, principal
stresses, maximum shear stress, plane stress and plane strain conditions, compatibility conditions,
three-dimensional stress-strain relations, problems on plane stress & plane strain.
UNIT – II
Strain Measurements Methods: - Types of strain gauges, semiconductor strain gauges, electrical
resistance strain gauges, (Gage construction, strain gage mounting methods, gage sensitivity & gauge
factor), strain gauge circuits-potentiometer, Wheatstone bridge & transducer applications.
UNIT – III
Photo Elasticity: The stress optic law, plane and circular polariscopes, photo elastic materials, Fringe
multiplication.
UNIT – IV
Stress analysis using brittle coating methods, moiré method & grid method of strain analysis.

VR10
Learning Resources:
Text books:
1. Experimental Stress Analysis,James W. Dally & William F.Riley, McGraw-Hill, INC.
Newyork,3rd Edition,1991.
2. Experimental Stress Analysis, L.S.Srinath, Tata McGraw-Hill,sharp Editor,2009.
Reference Books:
1. Theory of Elasticity by Timoshenco and Goodier ,3rd Edition 2010 ,TMH
Web References:
1. http://www.experimentalstress.com/
2. http://rapiddigger.com/experimental-stress-analysis-william-f-riley/
3. Www.Rapid4search.Com/Files/Experimental_Stress_Analysis

VR10
ME 8002/4
MECHANICS OF COMPOSITE MATERIALS
Objectives: To explore the light weight materials like unidirectional continuous fiber
reinforced plastic [FRP] and enhancing the solid mechanics concepts to
characterize these composites at micro as well as macro level.
.

Outcomes:
Understand the composition of FRP composites, their classification,
advantages, applications and manufacturing methods. (c,f,i)
Observe for the number of independent elastic constants required to solve a
structural problem depending on the type of anisotropy in the material
(a,b,c,e,j)
Transform the material properties from material coordinates to geometric
coordinates ( a,b)
Understand the different failure theories of FRP composites (a,b,c )
Understand the interactions of constituents at micro level and estimate the
aggregate properties of composite ( a,b,c,e,k)
Analyze laminate by extending lamina analysis. (a,b,c,e)
Prerequisites: Advanced Mechanics of materials
UNIT – I
Basic Concepts : - Classification and characteristics of Composite materials, Mechanical behaviour,
Advantages and limitations, manufacturing procedures.
UNIT – II
Macromechanical behaviour of a lamina:- Stress- Strain relations for anisotropic materials,
Engineering constants for orthotropic materials, stress-strain relations for plane stress in an
orthotropic materials,Stress-strain relations for a Lamina of orbitrary orientation.
UNIT – III
Strength of an orthotropic lamina, Biaxial strength theories-maximum stress, maximum strain and T-
Sai Hill theories, Failure envelope.
Micromechanical behaviour of a lamina:- Mechanics of materials approach to stiffness & strength
(tensile loading).
UNIT – IV
Macromechanical behaviour of a laminatae: Classical lamination theory, Lamina stress-strain
behaviour, strain-stress variation in a laminate, resultant laminate forces & moments, symmetric &
Anti symmetric laminates

VR10
Learning Resources:
Text Books:
1. Robert M. Jones, Mechanics of Composite materials, McGraw-HILL KOGAKUSHA,
LTD, Tokyo.
Reference books:
1. B.D.Agarwal, Lawrence J.Broutman & K.Chandrashekhara, Analysis and performance of

fiber composites, John wiley & Sons, Inc, USA.
2. ISSAC M.DANIEL & ORI ISHAI, Engineering Mechanics of Composite Materials,
OXFORD University Press.
Web References:
1. http://www.springer.com/materials/
2. http://composite.about.com/
3. http://www.matter.org.uk/matscicdrom/manual/co.html

VR10
ME 8002/5
INDUSTRY NEED BASED ELECTIVE



Outcomes:
Understand the current needs of the industry. (a,f,i,j)
Engage in life-long learning. (a,i)
Use techniques, skills, and modern engineering tools. (a,b,c,d,j,k)
Analyze and solve the problems of the society. (a,c,g)
Prerequisit -------
es:
The syllabus will be decided in consultation with industry and BOS members based on
the proposals.

VR10
ME 8003/1
ROBOTICS
Objectives: To introduce the learners an understanding of the principles and operation of

industrial robots used in modern manufacturing, provide basic concepts on
robot control systems, analysis of different sensors used and their application
within an industrial robot

Outcomes:
Understand the basic components of robotics (a)
Differentiate the various types of robots and robot grippers(a)
Understand the Machine vision functions (a,d)
Understand the working principles of Robot sensory devices (a,d)
Calculate the transformations matrix for robot manipulator (a)
Design components to meet desired needs in terms of kinematics of robot links
(c,d)
Prerequisites: Mechatronics, Kinematics of machines and Design of machine elements
UNIT – I
Introduction to Robotics, major component of a robot, robotic like devices, classification of robots –
Classification by coordinate system and by control method, Specifications of robots, fixed versus
flexible automation, economic analysis, Overview of robot application.
UNIT – II
Robot end Effectors: Introduction, end effectors, interfacing, types of end effectors, grippers and
tools, considerations in the selection and design of remote centered devices.
Machine Vision: Introduction, Functions of machine vision, applications of machine vision.
UNIT – III
Robotic sensory devices : Objective, Non-optical position sensors – potentiometers, synchros,
optical position sensors – opto interrupters, optical encoders (absolute & incremental).
Proximity sensors : Contact type , non contact type – reflected light scanning laser sensors.
Touch & slip sensors : Tactile sensors – proximity rod & photo detector sensors, slip sensors –
Forced oscillation slip sensor, interrupted type slip sensors
UNIT – IV
Transformations and Kinematics : Objectives, homogenous coordinates, basic transformation
operations, forward solution – Denavit Hartenberg procedure. Simple problems involving planar
manipulators.
Introduction to Trajectory Planning, the manipulator jacobian.

VR10
Learning Resources:
Text books:
1. Robotic Engineering by Richard D.Klafter, Prentice Hall, Tata Mc Graw-Hill, 1995. 3rd
Edition.
2. Industrial Robotics by Mikell P.Groover, TMH
Reference Books:
1. Introduction to Robotics – John J. Ceaig, Addison Wesley,3rd Edition
2. Robotics – K. S. Fu, Gonzalez & Hee, Tata Mc Graw-Hill, 1995. 3rd Edition.
3. Robotics for Engineers by Yoram Koren. Tata Mc Graw-Hill, 1995. 3rd Edition.
Web References:
1. http://nptel.iitm.ac.in/courses.php?branch=Mechanical
2. http://academicearth.org/courses/introduction-to-robotics
Video references:-

VR10
ME 8003/2
FLEXIBLE MANUFACTURING SYSTEMS & GROUP TECHNOLOGY
Objectives: To introduce advanced production process.

To provide an introduction to the design and analysis of manufacturing
systems.

Oucomes
Understand the structure of FMS and work station for inspection. (a)
Understand the concepts of advanced material handling storage systems.(a,d)
Differentiate the various levels of control systems of FMS. (a)
Design the different types coding system. (a,b)
Gain advanced skills in modeling, design and simulation of complex systems. (j)
Prerequisites: Manufacturing Management, Computer aided Manufacturing, Optimization

Techniques
UNIT – I
Introduction: Manufacturing Automation, Definition and types of FMS, Architecture of FMS,
Workpiece flow in FMS, Performance measures of FMS.
WORK STATION: CNC Machines, Machine Centers, Inspection Stations.
UNIT – II
Automated material handling: Function of MHS, Types of Material handling equipment, Conveyor
systems, AGVs, Industrial Robots.
Automated storage systems: Characteristics of Storage Systems.
UNIT – III
Computer control system of fms: Functions of Computer, Control system architecture, Factory
level, Cell level control systems, Equipment control systems, Factory communications, Local area
networks, Data files and system reports.
Group technology: Introduction, need of G.T. Part families, Methods for developing part families.
UNIT – IV
Basic type of codes : Hierarchical codes, Attribute code, Hybrid code, selecting a coding system,
Developing a coding system in an industry, examples of coding systems, MICLASS, OPITZ, CODE
systems.Facility Design using, GT, Economic modeling in GT environment – production planning
cost model, Economics of GT, Application of GT for design retrieval, CAPP, NIC, MR and FMS.

VR10
Learning Resources:
Text books:
1. Automation, Production Systems and Computer Integrated Manufacturing by
M.P.Groover, 3rd Edition 2007,Prentice Hall
References:
1. Performance Modeling of Automated Manufacturing Systems, N. Viswanadham,
Y.Narahari.1992 , Prentice hall
2. CAD/CAM Handbook by Eric Teichloz.1985,TMH
3. Computer Integrated Design and Manufacturing by Bedworth Henderson,1991, TMH
Web references:
1. http://www.mechanicalindetail.info/advanced-manufacturing-systems/concept-of-
flexible-manufacturing-systems-FMS.htm
2. http://www.scribd.com/doc/19321303/Flexible-Manufacturing-Systems-FMS-A-
Whitepaper

VR10
ME 8003/3
MACHINE TOOL DESIGN
Objectives: To provide knowledge of design of various parts of machine tools, like gear
box, feed box, bed, columns, spindles etc
To analyze different machine tool drivers
To study the machine tool structures and its vibrations

Outcomes:
Understand the types of motions and also analyze Mechanical & Hydraulic
transmission elements (a,c)
Design a gear box with variable load conditions (a)
Understand the types of guide ways and design criteria for machine tool
structures (a,)
Design of Spindle and Power Screws (a)
Understand the sources of machine tool vibrations (a)
Understand the Lubrication and Rigidity in Machine Tools (a,)
Prerequisites: Mechanics of Materials, Advanced Mechanics of Materials, Engineering Mechanics-

I, Mechanics of Materials, Applied Thermodynamics, Design of Machine Elements,
Design of transmission Elements
UNIT – I
Introduction: Working and Auxiliary motions in Machine Tools, Parameters defining the working
motions of a machine tool, determination of the forces acting on the tool, determination of the forces
acting on the tool in certain machining operations and horse power requirement in lathe. Techno
economical pre requisites for undertaking the design of new machine tool, General requirements of
machine tool design. Engineering design process applied to machine tools.
Machine Tool Drives: Classification and choice of driving system, basic considerations in the
design of drives, Mechanical and Hydraulic Transmission and its elements, Aim of speed and feed
regulation.
UNIT – II
Design of Gear Box: Stepped regulation of speed, Design of speed gear box, feed gear box, Machine
tool drives using multiple speed motors, Special cases of gear box design, General recommendations
for developing the gearing diagram, Standardization of common ratio, Ray diagrams, Classifications of
speed and feed boxes. Step less regulation of speed and feed rates (elementary treatment only)
Machine Tool Guide ways: Functions and types of guide ways, types of slide ways, Types of anti
friction ways, Design of slide ways, Shapes of slide ways, Materials of slide ways, Methods of adjusting
clearances in slide ways, Design criteria and calculations for slide ways, Design of slide ways for wear
resistance, Design of slide ways for stiffness, Effect of lubrication and design of guide ways,
Protecting devices for slide ways.

VR10
UNIT – III
Machine Tool Structures: Function of Machine Tool Structures and their requirements, Design
criteria for machine tool structures, profile of machine tool structures, Basic design procedure of
machine tool structures, Introduction to design of Beds, Columns and Housings.
Design of Spindle and Power Screws: Functions of spindle unit and requirements of spindles,
Introduction to design of power screws, Design of sliding friction power screw, Design of rolling
friction power screws.
UNIT – IV
Machine Tool Vibrations:Introduction, forced vibration, self excited vibration, forced and damped
vibrations, stick- slip vibration in machine tools, vibration isolated tool holders.
Lubrication and Rigidity in Machine Tools:

Introduction, Steps in selecting proper lubricating oil, specification of lubricating oil, friction
conditions of working, Rigidity of machine tool unit, Overall static rigidity of machine tool, Dynamic
rigidity of machine tool.
Learning Resources:
Text books:
1. N. K. Mehata, “Machine Tool Design”, Tata Mc Graw Hill Publ. Co. Ltd., New Delhi.
1984
2. S. K. Basu & D. K. Pal, “Design of Machine Tools”, Allied Publishers, India.,1965
Reference Books:
1. G. C. Sen and A. Bhattacharyya, “Design and construction of Machine Tools”, New
Central Book agency, Calcutta.1999
2. F. Koenisberger, “Design principles of Metal Cutting Machine Tools”, Pergamon
Press.1964
3. N. Acherkhan, “Machine Tool Design”, Vol. 1 & 2 , and 3& 4, M I R Publishers,
Moscow. 1969
Web references:
1. www.srmuniv.ac.in
2. www.jntu.ac.in
3. www.iitk.ac.in
4. www.vit.edu
Other learning material such as computer based programs / CD, Professional standards /
regulations
MIT Video lessons
IIT, NPTEL video lessons.

VR10
ME 8003/4
DESIGN FOR MANUFACTURING AND ASSEMBLY
Objectives: To develop an understanding and appreciation for using a structured design

methodology.
To become familiar with fundamental design principles.
To explore basic manufacturing processes and the implications of design
choices for specific manufacturing processes
To use assembly considerations and assembly costs in evaluations

Outcomes:
Understand quality specifications of design for manufacturing and assembly.
(a,c)
Apply the concepts of design for casting, welding and forming operations. (a,c)
Identify the design factors and processes along customer desires for
manufacturing. (a,c,l)
Understand the design for assessable with case studies. (a,c)
Prerequisites: Mechanics of Materials, Advanced Mechanics of Materials
UNIT – I
Introduction to DFM:Qualities of a designer - Systematic working plan - Factors influencing choice
of materials - Manufacturing methods. Process capability. Tolerances - Relevant to manufacturing,
assembly. Tolerance stack - effects on assembly - Methods of eliminating tolerance stack.
UNIT – II
Form design - casting and welding:Influence of loading, materials, production methods on form
design. Casting considerations - Requirements and rules. Welding considerations - Requirements and
rules. Redesign of components for castings. Redesign of components for welding.Case studies.
Form design-forging
Forging considerations - Requirements and rules. Choice between casting, forging and welding.
Redesign of components for forging. Case studies
UNIT – III
Introduction to DFA:Distinction between assembly methods and processes. Factors determining
assembly methods and processes. Design factors independent of methods and processes. Design
factors dependent on methods. Design factors dependent on processes.
UNIT – IV
Design for assembly methods:Approaches to design for assembly - Approaches based on design
principles and rules - Qualitative evaluation procedures, knowledge based approach, and Computer
aided DFA methods. Assimilability measures. Boothroyd - Dewhurst DFA method - Redesign of a
simple product. Case studies

VR10
Learning Resources:
Text books:
1. Harry Peck., Design for Manufacture, Pittman Publication, 1983

2. Alan Redford and Chal, Design for Assembly - Principles and Procedures, McGraw Hill
International Europe, London, 1994
Reference books:
1. Robert Matousek., Engineering Design - A Systematic Approach, Blackie & Sons Ltd,
1963
2. James G. Bralla, Hand Book of Product Design for Manufacturing, McGraw Hill Co.,
1986
3. Swift, K. G., Knowledge Based Design for Manufacture, Kogan Page Ltd., 1987
Web references:
1. http://www.npd-solutions.com
2. http://poeth.com
3. http://hubpages.com
4. www.sciencedirect.com
5. http://soa.asee.org

VR10
ME 8003/5
ENERGY MANAGEMENT
Objectives: To describe the principles and techniques used in energy conservation, auditing
and management.
To describe the principles of efficient energy usage in commercial and
industrial sectors.

Outcomes:
Identify the waste heat sources in industries and develop conservation
methods. (a,d,e,h,j )
Evaluate the energy losses and its effect on plant economy. (c,f,h,i,k)
Apply energy management principles in manufacturing and process industries.
(a,c,d,h,k,l)
UNIT I
ENERGY CONSERVATION: Rules for efficient energy conservation – technologies for

energy conservation – outline of waste heat and material reclamation, load management,
alternate energy sources, and energy storage.
WASTE HEAT RECOVERY SYSTEMS: Guideline to identify waste heat – feasibility study
of waste heat – shell and tube heat exchanger – thermal wheel – heat pipe heat exchanger – heat
pump – waste heat boilers – incinerators.
UNIT II
ENGINEERING ECONOMICS: Managerial objectives, steps in planning – efficiency of

organization- capital budgeting – classification of costs – interest – types – nominal and effective
interest rates – discrete and continuous compounding – discounting - time value of money –
cash flow diagrams – present worth factor, capital recovery factor, equal annual payments –
equivalent between cash flows.
UNIT II
PROJECT MANAGEMENT: Method of investment appraisal – rate of return method, pay

back method, net present value method (NPV) – adoption of the methods in energy
conservation campaign – types of projects –– propose of project management – classification –
role and qualities of project manager – types of budgets - budget committee – budgeting.

VR10
UNIT IV
ENERGY AUDITING: objectives – level of responsibility – control of energy– energy

conservation schemes – energy index – cost index – pie charts – sankey diagrams – load profiles
– types of energy audits– energy audit of industries–general energy audit-energy saving potential.
ENERGY MANAGEMENT PROGRAMS: Necessary steps of energy management

programme – concepts of energy management – general principles of energy management –
energy management in manufacturing and process industries
Text Books :
1. W.R. Murphy & G.Mickay – ‘Energy Management’
2. P.W.O Callaghan – ‘Energy Conservation’, Pargamon Press
References:
1. D.A. Reay – ‘Waste heat recovery systems’, Pergmon Press
2. Albert Thumann – ‘Hand book of energy audits’
3. Craig B. Smith – ‘Energy Management Principles’, Pergarmon Press
Web Resources:
1. http://www.energymanagertraining.com/new_index.php
2. http://www.energylens.com/articles/energy-management
3. http://www.iiemindia.org/
4. http://www.energyprofessional.in/home.php
5. http://www.energysaversindia.com/

VR10
ME 8051
CAD & CAM LABORATORY
Objectives: To Analyze Mechanical Engineering problems using a Finite Element Software.

To Develop CNC programs & simulation of turning, milling, thread cutting etc.

Outcomes:
Understand the various features of Pre-processing, Processing and Post-
processing operations of a Finite Element Software. (a,b, e,k)
Perform basic structural and thermal analysis of mechanical engineering
problems using FE Software. (a,c,e,k)
Perform Step turning and taper turning operations on CNC lathe. (a,e,k)
Develop thread cutting operations(a,e,k)
Perform linear and circular interpolation on a CNC Milling m/c. (a,e,k)
Perform simulation of machine shop with 2 or more machines. (a,e,k)
FINITE ELEMENT ANALYSIS:
1. Static analysis of a 1 D Structural problem (Bar / Beam / Truss)

2. Static analysis of a 2D/3D Structural problem (Plane stress/Plane strain/Axi symmetric
option)
3. Modal Analysis of a Beam and a Plate
4. Steady state Heat Transfer Analysis (Use of different B/C’s)
5. A Transient Heat conduction Problem.
6. A Thermo Elastic problem
7. Solution for a Fluid flow problem.
CNC TRAINER MACHINES:
LATHE: * Step turning * Taper turning * Profile turning

* Thread cutting * Parting/Grooving
MILLING * Linear and Circular interpolation * Mirror Imaging
SIMULATION: Simulation of Machine Shop with 2 or more machines
A User defined design based experiment

VR10
ME 8052
PROJECT WORK

Tutorial : 6 hrs/ week Semester End Examination: 100 Marks
Objectives: Demonstrate a wide range of skills learned during the course of study by
involving them to deliver a product that has passed through the design,
analysis, testing and evaluation stages.
Provide students with project defining methodology, structuring,
establishment and execution of appropriate concept feasibility studies.
Preparing project formulation dealing with specific objective.
Develop professional project oriented skills including communication, team
management and to lead efficiently in a multidisciplinary team.

Outcomes:
Get Exposure to research and development (a,b,e,f,h,k)
Generate and Implement innovative ideas for social benefit.(a,f,h,k)
Develop Algorithms/Programs.(a,e,k)
Develop prototype/models. (a,b,d,k)
Solve the industrial problems at various stages.(a,b,e,f,h,k)
Publish/present research papers in National/International journals &
conferences.(a,b,e,f,g,i,k)
*
Student should work another 12 hours per week.
10.2.5 of VR10.

Me VR10 PDF

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Me VR10 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Me VR10 PDF

Uploaded by

Copyright:

Available Formats

VR10

DEPARTMENT OF MECHANICAL ENGINEERING

I / IV B.TECH. :: First SEMESTER

Periods per week Maximum Marks

FY 1001 Engineering Mathematics – I 4 1 - 4 30 70 100

FY 1002 P Engineering Physics 3 1 - 3 30 70 100

FY 1005 Introduction to Computing 2 - - 2 30 70 100

FY 1006 G Engineering Graphics 2 - 6 5 30 70 100

FY 1051 P Engineering Physics Lab - - 3 2 25 50 75

FY 1052 Basic Computing Lab - - 3 2 25 50 75

Total 17 3 14 25 230 520 750

I / IV B.TECH. :: Second SEMESTER

FY 2005 Programming in C 3 1 - 3 30 70 100

FY 2006 PE Professional Ethics 2 - - 2 30 70 100

FY 2051 C Chemistry Lab - - 3 2 25 50 75

FY 2052 C Programming Lab 3 2 25 50 75

FY 2053W Basic Workshop - - 3 2 25 50 75

Total 19 4 9 25 255 570 825

DEPARTMENT OF MECHANICAL ENGINEERING, V.R SIDDHARTHA ENGINEERING COLLEGE 1

SCHEME OF INSTRUCTION AND EXAMINATION

ME 3002 Mechanics of Materials 4 1 - 4 30 70 100

ME 3003 Kinematics of Machines 4 1 - 4 30 70 100

ME 3004 Basic Thermodynamics 4 1 - 4 30 70 100

ME 3005 Manufacturing Processes 3 1 - 3 30 70 100

ME 3006 Environmental Science 3 - - 3 30 70 100

Computer Aided Drafting

ME 3052 Work shop Practice - - 3 2 25 50 75

Total 22 5 6 26 230 520 750

II / IV B.TECH. (Mech) :: Fourth SEMESTER

ME 4004 Fluid Mechanics 4 1 - 4 30 70 100

ME 4051 S.M & F.M. Lab - - 3 2 25 50 75

ME 4052 Communication Skills Lab - - 2 1 25 50 75

Total 23 4 5 26 230 520 750

DEPARTMENT OF MECHANICAL ENGINEERING, V.R SIDDHARTHA ENGINEERING COLLEGE 2

SCHEME OF INSTRUCTION AND EXAMINATION

Periods per week Maximum Marks

ME 5001 Hydraulic Machines 4 1 - 4 30 70 100

ME 5051 Geometrical Modeling Lab. - - 3 2 25 50 75

III / IV B.TECH. (Mech) :: Sixth SEMESTER

ME 6051 Fuels & IC Engines Lab - - 3 2 25 50 75

ME 6052 Machine Tool lab - - 3 2 25 50 75

ME 6054 Term Paper - 1 - 1 25 50 75

Total 19 4 9 26 250 550 800

DEPARTMENT OF MECHANICAL ENGINEERING, V.R SIDDHARTHA ENGINEERING COLLEGE 3

SCHEME OF INSTRUCTION AND EXAMINATION

IV / IV B.TECH. (Mech):: Seventh SEMESTER

Periods per week Maximum Marks

ME 7001 Operations Research 3 1 - 3 30 70 100

ME 7006 Elective – II 4 - - 4 30 70 100

ME 7051 Heat Transfer Lab - - 3 2 25 50 75

ME 7052 Design & Metrology Lab. - - 3 2 25 50 75

ME 7053 Mini Project - 1 - 1 25 50 75

Total 21 6 6 26 255 570 825

DEPARTMENT OF MECHANICAL ENGINEERING, V.R SIDDHARTHA ENGINEERING COLLEGE 4

SCHEME OF INSTRUCTION AND EXAMINATION

Periods per week Maximum Marks

ME 8003 Elective – IV 4 - - 4 30 70 100

ME 8051 CAD & CAM Lab. - - 3 2 25 50 75