Integrated Amplifier

A-S700 NEW PRODUCT BULLETIN

Designed for superb musical expression with outstanding power and sound quality,
the A-S700 will show its true worth when paired with the CD-S700 CD Player.

High Sound Quality Main Specifications

[AUDIO SECTION]
Maximum Power (4 ohms, 1 kHz, 0.7 % THD, for Europe) 160 W + 160 W
• ToP-ART (Total Purity Audio Reproduction Technology) Minimum RMS Output Power (8 ohms, 20 Hz—20 kHz, 0.019% THD) 90 W + 90 W
• I/O (input to output) Direct Symmetrical Design with top-quality Maximum Power (8 ohms, 1 kHz, 10% THD) 145 W + 145 W
parts, ART (Anti-Resonance and Tough) Base and solid center bar Dynamic Power (8/6/4/2 ohms) 140/170/220/290 W
Input Sensitivity/Impedance CD, etc. 200 mV/47 k-ohms
• Pure Direct Maximum Input Signal CD, etc., 1kHz, 0.5% THD 2.2 V
Frequency Response (CD Direct On) 10 Hz-100 kHz ±1 dB
• CD Direct Amplification
Total Harmonic Distortion (20 Hz—20 kHz, CD to Sp Out) 0.012% (50 W/8 ohms)
• High dynamic power, low-impedance drive capability Signal-to-Noise Ratio CD, etc. [CD Direct On] 110 dB (input shorted, 200mV)
RIAA Equalization Deviation 20 Hz-20 kHz ±0.5 dB
• Aluminum front panel and knobs Loudness Control Characteristics (Attenuation, 1 kHz) -30 dB

[GENERAL SECTION]
Advanced Features Standby Power Consumption 0.1 W
435 x 151 x 382 mm
Dimensions (W x H x D)
• Continuously Variable Loudness Control 17-1/8" x 5-15/16" x 15-1/16"
Weight 10.9 kg; 24 lbs.
• Rotary-encoder input selector with LED
Product designs and specifications are subject to change without notice.
• Remote controllable motor-driven volume control
• Gold-plated input terminals
• Rec Out Selector
• Speaker A, B, A+B selection Silver finish available in some areas.

P10020841W-AS700@NPB
Technical Data 1
Integrated Amplifier

A-S700 NEW PRODUCT BULLETIN

HIGH SOUND QUALITY being affected by noise and distortion. Yamaha’s Gold-Plated Input Terminals
amplifier design technology called ToP-ART features The A-S700 uses high-grade gold-plated input
Designed to Convey Genuine Musical I/O (input to output) Direct Symmetrical Design, terminals that provide a secure connection and
Expressiveness with left and right channels organized in a straight, ensure high quality signal transmission.
The A-S700 has inherited the Natural Sound symmetrical layout for highest signal purity.
concept of the A-S2000 and the A-S1000 Series: Advanced Yamaha audio technology and Aluminum Front Panel
By pursuing the reality of musical instruments and component parts give the A-S700 the winning edge The aluminum front panel provides a elegant
the human voice without adding extra seasoning to in audio performance. For signal purity, Yamaha’s look and helps to improve sonic performance.
the music, convey the thoughts of the musician or I/O (input to output) direct symmetrical design The volume and input selector knobs are also
recording engineer. Expressing the reality of organizes the left and right channel circuitry in a crafted of aluminum for a solid feel.
musical instruments is the foundation of Natural symmetrical layout. Custom-made power
Sound that only a musical instrument manufacturer transformer, custom-made block capacitors, two ADVANCED FEATURES
can achieve. direct signal path speaker relays, one-point
The A-S700 was tuned with three objectives: grounding system, aluminum-extruded heat sinks Continuously Variable Loudness Control
to naturally produce the harmonic constituents of and other top-quality parts effortlessly handle and Bass/Treble/Balance Controls
violins and other high frequency instruments, to demanding audio signal conditions. High-rigidity With this control, the midrange frequencies are
express the rich texture of the human voice and support and vibration damping are provided by a attenuated over a continuously varying, level-
guitars and other midrange instruments, and to solid center bar and Yamaha’s ART (Anti-Resonance dependent curve,
0
prevent the bass of kick drums or orchestra from and Tough) Base bottom chassis. instead of a fixed
losing its deep feeling and weightiness. By level of low and -10

Response (dB)
achieving these three objectives, that is by focusing Pure Direct high frequency -20
on faithfully reproducing musical expressiveness, When this switch engaged, the signal bypasses the boost as in
the A-S700 fully conveys not only the clarity, but tone, loudness, balance controls, and other circuit, conventional -30

also the joy of music. being fed directly to the discrete power amplifier. It loudness controls. -40
20 50 100 200 500 1k 2k 5k 10k 20k
travels in a straight line from the volume control, The Frequency (Hz)

ToP-ART (Total Purity Audio through the high-gain short, direct path is bass/treble/balance An original Yamaha feature,
Reproduction Technology) maximum signal purity. controls are Continuously variable loudness Control
maintains natural tonal balance as the
When processing and transmission of the audio continuously volume is reduced.
signal is simple and direct there is less chance of it CD Direct variable, so they
Amplification can offer smooth and accurate tonal response
Engaged by a front panel switch, it matches CD control over a wide range. And, with the controls
signal levels so each stage produces less noise, set to their center positions, you have a flat
resulting in improved S/N ratio and maintenance of tonal balance, with no influence on the original
the amp’s total gain balance. sound.
Pure Direct / CD Direct Amplification Block Diagram
CD CD Direct Amp To Power Amp
Rec Out Selector
Rec Out Selector lets you easily and simply listen
Pure Direct to one source while recording another, for even
Tuner, etc.
more convenience and flexibility in your multi-
e
um
l
Vo

component system.
le

ss

ce
eb

ne

lan
/Tr

ud

Input Selector
Ba
ss

Lo

Other Notable Features

Ba

• Remote controllable motor-driven volume

High Dynamic Power, Low-Impedance control
Drive Capability • Rotary-encoder input selector with LED
The A-S700 is capable of delivering large amounts • Speaker A, B or A+B selection
of reserve power for accurate reproduction of high • Detachable AC power cable
energy peaks. This emphasizes the music’s dynamic • 0.1W standby power consumption
qualities and provides a sharper sound image. • System remote unit
A-S700 Extensive Connection Panel

I/O (input to output) direct

symmetrical design with center bar
(top), ART (Anti-Resonance and
tough) Base (left bottom), quality
parts including one-point grounding
system (right top), custom-made
power transformer (right center) and
custom-made block capacitors (right
bottom) Rear panel is depending on areas. Banana-plug compatible speaker terminals are not available in some areas.

Technical Data 2