Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 115 views

    14 Inspection and Testing

    Uploaded by

    elmira
    The document discusses inspection and testing requirements for welding processes. It outlines that inspections and tests should be conducted at appropriate points during manufacturing to ensure conformity with contract requirements. Inspections and tests are required before, during, and after welding to check elements like welder qualifications, welding parameters, workpiece quality, and dimensional accuracy. Records of inspection results and any non-conformances must be documented.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    14 Inspection and Testing

    Uploaded by

    elmira
    115 views3 pages
    The document discusses inspection and testing requirements for welding processes. It outlines that inspections and tests should be conducted at appropriate points during manufacturing to ensure conformity with contract requirements. Inspections and tests are required before, during, and after welding to check elements like welder qualifications, welding parameters, workpiece quality, and dimensional accuracy. Records of inspection results and any non-conformances must be documented.

    Original Description:

    iso 3834 14

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses inspection and testing requirements for welding processes. It outlines that inspections and tests should be conducted at appropriate points during manufacturing to ensure conformity with contract requirements. Inspections and tests are required before, during, and after welding to check elements like welder qualifications, welding parameters, workpiece quality, and dimensional accuracy. Records of inspection results and any non-conformances must be documented.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    115 views3 pages

    14 Inspection and Testing

    Uploaded by

    elmira
    The document discusses inspection and testing requirements for welding processes. It outlines that inspections and tests should be conducted at appropriate points during manufacturing to ensure conformity with contract requirements. Inspections and tests are required before, during, and after welding to check elements like welder qualifications, welding parameters, workpiece quality, and dimensional accuracy. Records of inspection results and any non-conformances must be documented.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 3
    At a glance
    Powered by AI
    The key takeaways are about inspection and testing procedures at different stages of welding to ensure quality.

    The different stages of inspection and testing mentioned are before welding, during welding, and after welding.

    Details that need to be checked before welding include suitability of welders qualifications, welding procedure specifications, parent material, welding consumables, joint preparation, and working conditions.

    14 Inspection and testing

    14.1 General

    Applicable inspections and tests shall be implemented at appropriate points in the


    manufacturing process to assure conformity with contract requirements. Location and
    frequency of such inspections and/or tests will depend on the contract and/or product
    standard, the welding process and the type of construction (see 5.2 and 5.3).
    NOTE: The manufacturer may carry out additional tests without restriction. Reporting of
    such tests is not required.

    14.2 Inspection and testing before welding

     Before the start of welding, the following shall be checked:


     suitability and validity of welders’ and welding operators’ qualification certificates;
     suitability of welding-procedure specification;
     identity of parent material;
     identity of welding consumables;
     joint preparation (e.g. shape and dimensions);
     fit-up, jigging and tacking;
     any special requirements in the welding-procedure specification (e.g. prevention of
    distortion);
     suitability of working conditions for welding, including environment.

    14.3 Inspection and testing during welding

    During welding, the following shall be checked at suitable intervals or by continuous


    monitoring:
     essential welding parameters (e.g. welding current, arc voltage and travel speed);
     preheating/interpass temperature;
     cleaning and shape of runs and layers of weld metal;
     back gouging;
     welding sequence;
     correct use and handling of welding consumables;
     control of distortion;
     any intermediate examination (e.g. checking of dimensions).
    The ISO documents to which it is required to conform to fulfil the quality
    requirements are specified in ISO 3834-5:2005, Table 7, for arc welding, electron beam
    welding, laser beam welding and gas welding, and in ISO 3834-5:2005, Table 10, for other
    fusion welding processes.

    14.4 Inspection and testing after welding

    After welding, the compliance with relevant acceptance criteria shall be checked:
     by visual inspection;
     by non-destructive testing;
     by destructive testing;
     form, shape and dimensions of the construction;
     results and records of post-weld operations (e.g. post-weld heat treatment, ageing).
    The ISO documents to which it is required to conform to fulfil the quality
    requirements are specified in
    ISO 3834-5:2005, Table 8, for arc welding, electron beam welding, laser beam welding and
    gas welding, and in ISO 3834-5:2005, Table 10, for other fusion welding processes.

    14.5 Inspection and test status

    Measures shall be taken, as appropriate, to indicate, e.g. by marking of the item or a routing
    card, the status of inspection and test of the welded construction.

    Annex A

    ISO 3834-2, ISO 3834-3 and ISO 3834-4


    Clause No. Required documents Typical records/reports
    14 Inspection and testing: Included in the documented process Dimensional reports
    for production planning and
    Inspection reports
    ⎯ preparation of inspection plans; controlling production operations.
    Records of repairs
    ⎯ inspection and testing before welding; Inspection plans.
    ⎯ inspection and testing during welding; Inspection procedures.

    ⎯ inspection and testing after welding.


    Related Related clause: 14
    Section (Inspection and
    testing)

    14.2 Inspection 14.3 Inspection 14.4 Inspection 14.5 Inspection


    14.1 General and testing and testing and testing after and test status
    before welding during welding welding

    Dimensional reports Related


    Dimensional reports standards
    Inspection reports Inspection reports
    Dimensional reports Related forms
    Records of repairs Records of repairs
    Inspection reports

    Related
    standards
    Related standards
    Related standars Related forms
    Related forms
    Related forms

    You might also like