TROUBLE SHOOTING

Read all instructions BEFORE assembly and USE of product.

WHEEL ADJUSTMENT: FLAT TIRE: KEEP INSTRUCTIONS FOR FUTURE USE.
It should be noted that all three wheel vehicles The jogging stroller features bicycle tires to
can be easily influenced to deviate from a allow for extended wear and ease of pushing.
straight line. In most cases strollers can have Just like a bicycle tire, the jogging stroller can
a tendency to pull to the right/left due to
many factors. Including uneven tire pressure,
improper wheel installation, road conditions and
manufacturing tolerances. If you find your Baby
suffer from flat tires. If you have a flat tire, you
can use a standard bicycle tire repair kit to repair
the tire or you can take the tire to a bicycle
shop for repair. If you experience numerous
Velocity Jogging Stroller
Trend stroller to significantly track or pull to the flat tires, you may want to purchase thorn proof
left or right while use on flat terrain, follow the inner tubes for the jogging stroller. These can be
sequence of the instructions on page 3 to realign purchased at bicycle stores or at many national
your front wheel. retail stores. The correct size to purchase is
shown on the sidewall of the tire.

IF YOU EXPERIENCE ANY DIFFICULTY IN USING THIS PRODUCT,

PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT AT
1-800-328-7363 BETWEEN THE HOURS OF 8:00 A.M. AND 4:30 P.M. PACIFIC
STANDARD TIME FOR ASSISTANCE. PLEASE HAVE YOUR MODEL NUMBER AND
MANUFACTURING DATE AVAILABLE WHEN YOU CALL. THIS INFORMATION CAN BE
FOUND ON A SMALL STICKER ON THE INSIDE OF THE STROLLER FRAME.

Instruction Manual
Convenience through innovation and thoughtful design

11.09

Contact us by mail: Contact us by phone:

Baby Trend, Inc. 1-800-328-7363 (8:00am ~ 4:30pm PST)
Convenience through innovation and thoughtful design

1607 S. Campus Ave., Ontario, CA 91761 or online http://www.babytrend.com www.babytrend.com

 WARNING PARTS
WARNING: Please follow all of these instructions to ensure
the safety of your child. Keep these instructions for future reference. SWIVEL FRONT WHEEL

WARNING: Failure to follow these instructions could result in

serious injury or death. Avoid serious injury from falling or sliding out.
Always use the safety harness and insure that the children are properly
positioned according to these instructions.

WARNING: Never leave children unattended.

Front Wheel
Stroller
• CAUTION: This single jogger is designed for one child only. Use with more than one child may
cause the unbalance condition which can injure/ harm your child.
• Purses, shopping bags, parcels, diaper bags or accessory items may change the balance of the
stroller and cause hazardous unstable conditions.
• The maximum weight that can be carried in the basket is 5 lbs, child tray and parent tray are 3 lbs
each. The maximum weight can be carried in the side pockets (2) is 3 lbs, back pockets (2) is
3 lbs and canopy pockets is (2) 1 lb. Excessive weight may cause a hazardous unstable condition
to exist. Parent Tray*
*type vary
• Be certain the stroller is fully erect and latched in the open position before allowing the children
near the stroller.
• Use of the stroller with children weighing more than 50 pounds or over 42 inches tall, will cause
excessive wear and stress on the stroller and may cause a hazardous unstable condition to exist.
• NEVER use the stroller on stairways or escalators.
• NEVER use the stroller with roller skates, in-line skates, skateboards or bicycles.
• We recommend that the child occupant be at least 6 months of age prior to use of the stroller for
jogging. Because children develop at different rates, please discuss the use of a jogging stroller Child Tray Rear Wheels
with your health care provider prior to jogging with your child.
• NEVER allow your stroller to be used as a toy.
• To clean use only mild household soap or detergent and warm water on a sponge or clean cloth.
• Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis.
Replace or repair parts as needed.
• Discontinue use of stroller should it malfunction or become damaged. Please contact our customer
service Parts Hotline to arrange for repair or obtain replacement parts. OPTIONAL
If you experience any difficulty with the use of our product or have a question regarding these
instructions, please contact our Customer Service Department at 1-800-328-7363 between the
hours of 8:00 a.m. and 4:30 p.m. (PST). Please do not return the product to the store as once it
is returned it cannot be re-sold and the materials and energy used to make it are wasted.

Contact us by mail: Contact us by phone:

Baby Trend, Inc. 1-800-328-7363 (8:00am ~ 4:30pm PST)
1607 S. Campus Ave., Ontario, CA 91761 or online http://www.babytrend.com
Pedometer Tire Pump Infant Car Seat

1 Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved. Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved. 2
 ASSEMBLY ASSEMBLY
IMPORTANT! To ensure safe operation of your stroller, • Close the lever (Fig. 5) and you should feel
significant resistance and the wheel should
Tighten

please follow these instructions carefully. Please keep these be held tightly. If you do not, open the lever
instructions for future reference. and tighten the finger nut a bit more and close
the lever again. Continue to do this until the
IMPORTANT! Before assembly and each use, inspect this wheel is held tightly in the fork.
DO NOT OVER TIGHTEN.
product for damaged hardware, loose joints, missing parts or sharp Loosen

edges. NEVER use if any parts are missing or broken. Fig. 4

WARNING: Always make

IMPORTANT! Adult assembly is required. sure the lever is in closed position Close Open
before use. Leaving the lever in Fig. 5
opened position can cause the wheel
to fall off.
Swivel Front Wheel
• If you experience front wheel wobble that is
beyond what is normal for use while walking
Remove stroller from box. The front wheel, rear or jogging you may have to adjust the front
wheels, fender, and parent tray need to be installed wheel housing nut. This nut is located under
prior to use. the footrest located at the front of the jogger.
Fig. 1 You can use a standard crescent wrench to
tighten the nut.
FRONT WHEEL DO NOT OVER TIGHTEN this can cause Fig. 6
To attach the front wheel, unfold stroller as damage to the wheel housing. (Fig. 6)
described in the section following:
Loosen
• Lean the stroller backwards so that it rests on
Fig. 2a
the handle and rear axle frame and the front
wheel forks are pointing upward. (Fig. 1)
FENDER INSTALLATION/
Fig. 2b
• The front wheel features a quick release REMOVAL
attachment system. The quick release must be To secure the fender to the frame, use the 4 screws
open enough for the wheel to slide on the forks. provided. Fig. 7a
Rotate the lever forward to loosen one side
(Fig. 2a) and loosen the finger nut on the other • Examine the bottom of the front fender. You
side. (Fig. 2b) will notice four 1/4 inch diameter plastic tubes
protruding from the bottom (Fig. 7a).
Fig. 3a • Slide the front wheel onto the front forks. Fig. 7b
(Fig. 3a) Make sure the front forks are in the • These tubes must be lined up with the holes in
Fig. 3b position as shown on Fig. 3b. the front frame assembly (Fig. 7b).
Fork Plate
• Line up the tab on the Retainer Plate with the • Line up the front fender and press onto the
Slot
Slot on both sides of the forks. (Fig. 3c) front frame assembly (Fig. 7c). Fig. 7c
Retainer Plate
IMPORTANT! The tab on the Retainer Plate • Insert the 4 screws through the underside of
must be lined up with the slot before tighten the front frame assembly into the front fender's
the wheel. plastic tubes. Tighten the screws only until
• With the wheel in position, tighten the snug (Fig. 7d). DO NOT OVER TIGHTEN.
Lever
Ring finger nut on the axle until it is very close To remove, reverse the above steps.
Fig. 3c to contacting the fork and rotate the lever to
tighten it as shown in Fig. 4. Fig. 7d
3 Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved. Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved. 4
 ASSEMBLY ASSEMBLY
REAR WHEEL CHILD TRAY (if equipped)
Lean the stroller forward to rest on the front To attach the front child tray: Insert the tray
wheel. To attach the rear wheels, push each clipinto the fitting on the stroller’s fold joint.
wheel's axle into the plastic corner fitting as Check the tray clip locks into place. (Fig. 11a)
shown in Fig. 8. Depress the metal lever on the Push the angled tray onto the post at the end of
the right armrest, while pressing downward on the
inside of the corner fitting as you push the axle snap button, until locked into place. Rotate the
into corner fitting. When the wheel will not go tray downward until latched onto the left armrest.
Fig. 8 on any farther, release the lever. Check that the Please check that the snap button comes through Fig. 11a
wheel has locked into the corner fitting by pulling and securely latches the tray in place. (Fig. 11b)
on the wheel. If not locked, lift upward on the
lever, push the wheel on farther and release lever. To open the front child tray: Pull one side of the
release lever (Fig. 11C) located on the underside
Ensure that the wheels are firmly locked of the child tray and lift upward. The child tray Fig. 11b
into place. NEVER use the stroller if the will lift and rotate out of the way to allow access
wheels are not locked into place, contact our to the seat.
customer service department immediately at
1-800- 328-7363, between the hours of 8:00am PEDOMETER (if equipped)
and 4:30pm PST, for assistance. The pedometer is located in a separate box inside
Fig. 11c
the main box. Slide the pedometer onto the
provided mounting bracket as shown in
Fig. 12a. Connect the wire as shown in Fig. 12b.
PARENT TRAY Instructions on how to use the pedometer are
To attach the parent tray, align the fittings on the included in the separate box. Caution: When
ends of the parent tray with the fittings on the folding the stroller, please make sure to rotate
outsides of the handle. Hook the hole in the parent the pedometer inside towards the parent tray to
tray. Pull outward on the opposite end while prevent damage when folded.
pushing down on the tray until locked onto the Fig. 12a
Fig. 9 stroller handle. Please be careful not to pinch your
fingers when installing the parent tray. (Fig. 9) To MP3 SPEAKER (if equipped)
remove the parent tray, pull outward on one end of The parent tray comes with speaker with MP3 jack
the tray while lifting upward. inside. The speaker has a wire with a male jack Fig. 12b
Open for use with MP3 player so you and your child can
listen to music while you jog. Connect male end
WARNING: Do not place of speaker wire into your MP3 player. (Fig. 13)
hot liquids or more than 3 pounds
in the parent tray. Serious burns or INFANT CAR SEAT (if equipped)
To attach the Baby Trend Infant Car Seat, recline
unstable conditions could result. the seat all the way back.
Fig. 13
Fig. 10a

CANOPY WARNING: Never jog or

Close To open the canopy: push forward on the front run with your newborn in the car
edge of the canopy while holding the rear of seat position. Use for strolling only.
canopy in place. (Fig. 10a)
To fold the canopy: pull backwards on the front • Position the Infant Car Seat, facing toward the
edge. (Fig. 10b) rear of the stroller, so that the seat shell goes
into the front tray and latches into place. (Fig.
14) Check that the Infant Car Seat is firmly
Fig. 10b locked onto the front tray before using. Fig. 14

5 Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved. Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved. 6
 SAFETY SAFETY
• Check that the front child tray is firmly The swivel jogger is equipped with a front
attached to the stroller armrests. Make sure wheel locking device. There are two types, Fig.
that the car seat locks into the front child tray. 18a is a remote release lever located under the
Then turn tabs on stroller frame to lock the right side handle. Pull to disengage the wheel and
front of the car seat into the stroller. (Fig. 15) push to engage the locking device located under
the footrest. Fig. 18b front wheel lock works in a
vertical motion from top to bottom, locking and Fig. 18a
• To remove the Infant Car Seat, squeeze the
Fig. 15 release handle located at the foot-end of the unlocking the wheel.
seat and carefully lift upward on the seat.
(Fig. 16)
WARNING: Avoid serious
Lock

Before placing your children in the stroller,

injury from falling or sliding out.
please follow the instructions below.
Always use the safety harness. Unlock

Fig. 18b

WARNING: Always STRANGULATION

check with your pediatrician for a
recommended starting age / weight HAZARD: Child can
for your baby in an all terrain stroller. strangle in loose straps. Never leave
Fig. 16
child in seat when straps are loose
or undone.
WARNING: Always set
brakes when the stroller is not being TO SECURE THE CHILD
pushed so that the stroller will not The shoulder straps of the 5-point harness have
roll away. NEVER leave stroller 3 attachment positions. Select the position that
unattended on a hill or incline as places the shoulder strap level with, or below the Shoulder Strap

the stroller may slide down the hill. top of the child's shoulder.

• Carefully place the child in the stroller seat

and bring the safety harness around the
Squeeze

BRAKES
Waist Strap
child's waist and over the shoulders. Place the
To engage brakes, apply light downward pressure crotch strap between the child's legs. Insert
to the brake lever located on each rear wheel. The the male end of each shoulder/waist belt into
stroller may require slight forward or rearward the buckle on the crotch strap. Tighten the
Adjust for a snug fit

movement in order to line up the teeth on the harness to be snug around the child's waist Crotch Strap

brake with each wheel brake cluster. (Fig. 17) and over the child's shoulders Please see Fig. 19a
Check that the stroller will not move and that both figure 19a.
brakes are properly applied. To release, gently lift
Fig. 17 up on the brake lever. • To release, apply pressure to both sides of
each male clip until the clip is released. See

WARNING: Always lock

figure 19b. This process requires a moderate
amount of effort so as to prevent an accidental
the front swivel wheel in STRAIGHT release by your child.
position before placing or removing
your children from the jogger. Fig. 19b

7 Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved. Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved. 8
 SAFETY FOLD / UNFOLD

SEATBACK POSITIONING Hold the body of Tire Pump and pull back on the
The seat has a multiple position recline that is handle, press down on handle pushing air into tire.
controlled by a strap and buckle assembly behind Repeat until tire is at 20 to 25 pounds.
the seat. (Fig. 20a) To recline the seat, loosen the
strap through the buckle and adjust to the required
recline position. (Fig. 20b) To place the seat back
in a more upright position, press upward on the Trigger Release
Fig. 20a seat back with one hand while pulling the strap
through the buckle with the other. The strap will
lock automatically. WARNING: Care must be
The upright position should be used only for a taken when folding and unfolding
child that is at least 6 months old. Always re- the stroller to prevent finger
Fig. 20b adjust the safety harness, including the shoulder entrapment.
belts, when repositioning the seatback. Fig. 23
TO FOLD STROLLER
Close the canopy as described in the canopy
section. Recline seat by releasing buckle as
JOGGING WITH YOUR STROLLER described in seatback positioning section.
When you are jogging with your child, use the
following safety features: The stroller is folded by simultaneously pulling
each trigger fold. (Fig. 23) When the fold latches
• LOCK THE FRONT SWIVEL WHEEL IN are released, the handle will begin to fall toward
STRAIGHT POSITION the floor. Release the fold buttons and press
Fig. 21a
downward on the stroller handle until the stroller
• SAFETY WRIST STRAP: Always connect is completely folded. Secure the stroller in the
Fig. 21b the safety strap to either wrist when jogging. folded position by hooking the fold latch, located Fig. 24
This strap will keep the stroller from rolling on the right side of the stroller, over the rivet that
away in the event that you trip while running. protrudes from the frame. (Fig. 24)
(Fig. 21a) The safety strap must remain
connected to the rear lower frame cross
Flexible air hose inside member at all times. This location is intended
to prevent the stroller being tipped backward
WARNING: Care must be
Fig. 22a
in the event that you do fall to the ground.
The safety strap includes a Velcro attachment
for storage, on the left side of the stroller, taken when folding and unfolding
the stroller to prevent finger
Remove flexible air hose
Fig. 22b when not in use. (Fig. 21b)
entrapment.
TIRES Fig. 25
Tires are shipped un-inflated. The tires should TO UNFOLD STROLLER
be inflated on a regular basis to between 20 to 25 Stand the stroller on the ground with all three
pounds of air pressure. Always use a bicycle style wheels touching the ground. Release the folding
hand air pump to inflate the tires. latch, which is located on the right side. (Fig. 25)
Remove Tire Pump (if equipped) from storage
Valve stem of rim Small brass fitting location, remove flexible air hose (Fig. 22a) from Lift up on the stroller handle with both hands until
Fig. 22c end of pump (Fig. 22b), thread small brass fitting the stroller frame is erected and locked in the open
into opposite end of pump (Fig. 22c), thread air position. (Fig. 26) The stroller has spring-loaded
nozzle tip onto valve stem of rim (Fig. 22d), now latches on both sides of the frame. Test that both
you’re ready to pump up your tires. latches are fully engaged prior to placing your Fig. 26
Fig. 22d
child in the stroller.
9 Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved. Copyright © 2009 - 2010, Baby Trend Inc., All Rights Reserved. 10