Intro To Orgonite

An Introduction to OrgoniteTM
second edition copyright 2004 Jon Logan

An overview of Orgone Matrix Material, it’s manufacture and application.
Email – wizzer@littlemountainsmudge.com
Phone – 250-446-2032
Mail – PO Box 139, Westbridge BC V0H2B0
Url – www.littlemountainsmudge.com
Introduction to OrgoniteTM second edition copyright 2004 Jon Logan
1
What is orgonite?
The word "Orgonite" refers to a new class of materials which are composed of a mixture of metallic particles suspended in an organic medium. The term
"Orgonite" was coined by Karl Welz, the man who is generally credited with inventing it. Though initially intended by Welz to refer only to his commercial
product, the name stuck- and has come into usage by most people familiar with the material. So... I suppose in the mind of Karl Welz and few other
folks, orgonite means Welz' s individual recipe, but to most others it has come to mean any material produced using the same basic conceptual
approach. In any case, it refers to an orgone matrix material, as opposed to a layered orgone accumulator. To a degree, a piece of orgonite will act as
an orgone accumulator in that it will tend to attract orgone from the area around it, but with an added dimension. The added dimension is that it will
process the orgone energy as it interacts with it, whereas an orgone accumulator more simply condenses orgone energy.
There are many variations on the basic concept of suspending the metal within the organic element (as opposed to using thin layers of organic and
metallic substances like in an orgone accumulator), and many other substances which can be added to the mixture to make it more potent, or to
specialize it for different applications. Most of the people producing orgonite wind up developing their own exact recipes, I use several different recipes
for slightly different applications. At the end of the day, the basic, fundamental ingredients of orgonite are metal particles and an organic medium to
suspend them in, usually resin.
A wide range of metaphysical disciplines all work with the same energy, know it by various names ... (orgone, odic force, reiki energy, prana, chi, etheric
energy, bio energy, bio magnetic energy, huna energy, animal magnetism, soft electrons, mass free electricity, radiesthetic color, astral energy, 4th
dimensional energy, emotional body energy, life force energy, and no doubt a bunch of other names I have never even heard of) ... and so far orgone
matrix material has proven itself a to be a readily adaptable and highly functional conceptual approach for work in these areas. Orgonite, (by any name)
both releases orgone energy when stimulated by other forms of energy, and has the capacity to change orgone from one state to another. It is especially
suited to taking the energy from an unhealthy state into a healthy, balanced state, and/or adding a selected property to the orgone energy which it
processes. This makes it useful in a wide range of applications, from alternative health through to radionics and other traditional metaphysics.
Organic substances attract ORgone energy and soak it up like a sponge, while metallic substances tend to repel it. Basically, ORgonite pulls in the
ORgone energy, and while the energy is inside the device, The metal particles and organic resin both push and pull on it in all directions at the same
time. This puts the energy in a scrambled, chaotic state. When the energy comes back out of the device, it collapses back into an organized, defined
state .As a side effect of being scrambled and put back together, it comes out clean! DOR is converted back into OR as it passes through the orgonite.
(DOR=Deadly ORgone Radiation... Harmful ORgone. OR=ORgone Energy, the Healthy kind)
Orgone matrix material, or orgonite, has not only the property of changing OR (Orgone) from one form to another, but also the property of ‘generating’
OR when stimulated by other kinds of energy... like light, sound, physical motion, or electricity. When using a matrix of randomly arranged particles
instead of orderly layers of the two substances (metal and organic) you get a different effect. Some benefits of using a matrix are:
A: Increased efficiency (higher proportionate orgone potential to mass) compared to a traditional ORAC.
B: Changes DOR (harmful ORgone) to OR (Healthy ORgone)... When orgone passes/percolates through the matrix, it is in effect reduced to its
component polarities of + (positive/masculine/hot), 0 (zero point/omni potential/infinite), and - (negative/feminine/cool). It is then recombined, and re-
emitted. The act of being broken down into its positive and negative charges and recombined basically flashes it across the 0 state and has the effect of
restoring the orgone to a ‘base’ state, i.e.. it is no longer ‘healthy’ or ‘unhealthy’ orgone, it is no longer orgone of any specific ‘color’, rather it comes out
of the matrix material as more or less undifferentiated orgone. That which makes the orgone ‘colored’ or differentiated is (oversimplified a tad) basically
encoded in the proportions of +/-, (+/-)0, and in oscillation rate between + and -. When the orgone exits the matrix material, the conditions which ' force'it
to exist in an undefined state no longer exist, and so it collapses back into a defined state, and is ' colored'to varying degree by the exact composition of
the matrix material and any minerals/other substances included in the matrix.
C: Orgonite does not actually generate orgone, in the truest sense of the word, but I suppose that is a technicality. Orgonite, when excited with other
forms of energy, both converts a portion of the energy used to excite it into orgone energy, and draws additional orgone energy from the Aether (the
cosmic omni potential ' pool'of orgone energy that has yet to be '
put to work'in 3D terms), and puts it to work as orgone manifest in 3D terms. Thus for
practical intents and purposes, orgonite '
generates'ORgone on demand when excited by scalar waves, magnetic fields, heat, sound, light, electrical
energy, kinetic energy, etc.
2
HHGs and TBs
The type of orgone device which is commonly called a ' Holy hand grenade'is a medium-sized device which attracts harmful ORgone energy, converts it
to healthy ORgone energy, and emits it again as a flow of healthy orgone energy. This is different from other orgone devices used up until this point,
which had the ability to block or collect harmful energy, but not convert it to healthy energy. The device gets it'
s name from an old Monty Python movie ;
)... When placed in an area, buried, or placed in a body of water, the ORgonite Holy hand grenade will act to continuously clean the ORgone energy
within a surprisingly large radius (average 3/4 mile radius from the device). A TB (Towerbuster) does basically the same thing on a little bit smaller scale.
The effective range of a towerbuster is generally somewhere around 1/4 mile.
A basic TB is a small (3 to 8 ounce volume), usually cylindrical or conical mass of orgonite with a quartz crystal embedded in it. Generally the xtal is on
the verticals axis if the device is tall, and on the horizontal axis if it disk-shaped. A basic HHG is a little larger (usually 8 to 32 ounce volume), usually
conical or pyramidal mass of orgonite with 5 double terminate quartz xtals embedded in it, one of them on the vertical axis and four of them on the
horizontal axis. The vertical xtal is near the small end of the device, and the horizontal xtals are arranged radially, near the wide end of the device. Don
Croft invented these two devices to counteract the adverse physical and mental health effects of HAARP, GWEN, ELF, SCALAR and HPRF
transmission towers. In addition to serving well for this purpose, the HHG and TB devices are highly effective multipurpose energy cleaners. Think of
them as air freshener for your aura.
To use one of these devices, simply place the device within an area and leave it alone. If possible, it increases the effectiveness to put them into a body
of water or bury them in the earth. It is not necessary to bury them or put them in water, and most folks who use them have a few in their homes, to
provide a constant cleaning action for the orgone envelope in their living space. With the HHGs, it helps a bit to align the device with the magnetic field of
the earth, so that one of the xtals in the base of the unit points north. People who are familiar with natural energy vortices, Curry and Hartman lines, Ley
lines, and so forth have been using these devices to restore many of the earth' s energy centers to healthy state. This process is generally referred to as
‘gifting’ or ‘towerbusting’. As should be no surprise to anyone familiar with orgone (by any name) , many of us have noticed beneficial changes in the
behavior of people within the effective range of such devices, whether they are aware of its presence or not. They are, in effect- getting the same sort of
emotional healing and balancing (and in some cases the commensurate physical benefits) that one would expect from more traditional methods of life
energy therapy. For several years I used xtals for basic pain relief and first aid in energy work on myself, and now I use something which is basically a
fancy TB.
These devices can also be used as meditation aids, used by holding it between the hands while meditating, or by sitting near it while meditating. They
can also be carried on the person in order to afford a constant cleaning action for your personal energy fields, and provide shielding against various
forms of energy assault, ranging from psychic attack to EM pollution. And, while the devices can be used as intent amplifiers /radionics boosters, IMO
there are more specialized orgonite devices which perform that task better. I have noticed that suspending water over the top of an HHG does charge it
with orgone energy, and I regularly use this kind of charged water as a general tonic, I find that it has beneficial effects both physically and energetically
(vitality, clarity of thought, emotional balance).
One thing which the HHGs and TBs seem to be good at is serving as a basic life energy therapy device, to speed healing and, in some cases, relieve
pain. I of course am not a doctor, and am not giving you medical advice, and that applies to everything on this site, bla bla bla. There are several folks
who find a TB or a slightly modified TB to be very useful (when held in the practitioner'
s hand or over the problematic body area on the person being
treated) in Reiki, Reflexology, Massage Therapy, healing hands, and so on and so forth (these are all systems which effect healing by working with the
human body' s orgone energy).
Unlike orgone accumulators, These devices do not have to be carefully protected from EM pollution and DOR. They convert DOR to OR, so I think it is a
good idea for most everyone to make at least one or two and put them in their homes, and enjoy the benefits of a healthy life energy environment where
they live. As with some of the other similar devices which are already in use, these devices have applications in agriculture and alternative health, in
addition to their primary function as an '
energy cleaner' - a device which processes life energy and removes harmful properties in so doing. Every day, we
all take a bath in more energy pollution than most folks care to think about, ranging from huge uses of metaphysics with some very nasty intent behind it,
to the modern phenomenon of technological assault on natural weather patterns (HAARP), The human mind and body (GWEN), and the harmful effects
that various more mundane electrical systems have on life energy. These devices have been shown time and again to have a beneficial effect on the life
energy of a given area, being adapted to many uses beyond the original purpose for them, and for which they are still heavily and successfully used,
which is to restore natural weather patterns to the environment around us by mitigating or nullifying the effects of weather control technology.
I have seen no evidence that HHGs or TBs will become saturated with DOR from prolonged exposure, but I have seen that such devices have a
processing capacity, and that capacity may be exceeded. I have been able to deal with that in most cases by simply using more devices. The capacity of
the device is determined by the mass of the device, (larger mass of orgonite = more capacity) the way the internal components are assembled, and the
composition of the orgonite itself. I have not found it necessary to move the HHGs and TBs around in order to keep them working, but I have noticed that
doing so excites them and ' stirs things up'quite a bit. The exception to this is when you are using them to create a perimeter or clean field in or around
your home or another area, in which case you ought to install them by placing them, rotating them clockwise until it ' feels right'
... and then try to avoid
moving them. Once moved, it takes some time for the fields to re-establish themselves. Where several devices are linked together to create a shield or
ley line, moving one causes the whole thing to wobble. Stimulating one of them also stimulates the whole of the field in which the linked devices are
included. If you have an SP, or a wand, or even a favorite xtal you use for a beamer you can go around the perimeter clockwise and touch each of the
TBs with the tip of your device as you go around. This assists in linking the devices together.
The reason they work better when buried is that the orgonite works a bit more efficiently when in contact with the earth, since the orgone ' resistance'of
air is slightly higher than the orgone '
resistance'of earth. Therefore, when the energy flows through the HHG or TB, it can flow a little more quickly if it
is buried, because it has a huge potential (the earth or the body of water) to which it is grounded. Even if you do not bury them, just tossing TBs into a
problem area works fine, burying them is a boost, and not absolutely necessary. Good thing, because there are many places where burying them is
impractical. If possible, toss them where they will land in water (best) or on earth, as opposed to pavement. Drop one in your annoying neighbor' s
bushes hahaha ...
3
Orgone Accumulators, Orgone generators and Orgonite
The basic difference between orgone accumulators (ORACs) and orgonite is that orgonite processes orgone energy, whereas ORACs condense orgone
energy. Some devices employ orgonites processing ability to ' generate'orgone from other forms of energy, and some devices employ orgonites
processing ability to change orgone from one state to another. Examples of this latter use are changing orgone that is in an unhealthy state into a orgone
that is in a healthy state, or converting orgone into the state which is most suitable for a given purpose at a given time (say, for therapy or radionics,
etc.).
An orgone generator is a device that both collects orgone, and translates other forms of energy into orgone energy. It is possible, using orgonite, to
convert heat, light, sound, scalar, kinetic, electrical and magnetic energies into orgone energy. Some people call orgone cleaners 'orgone generators' ,
and in fact the man who invented orgonite has patented the term orgone generator, so indeed there are people who would define these terms differently
than I do. However, I am trying to make the point that there are different functions involved, and as long as you are aware of them I suppose it does not
matter what you call the, except for the sake of convenience in establishing a cohesive terminology with respect to orgonomy. Orgonomy, by the way, is
a name for the study and application of orgone energy.
(Sigh), now... Orgonite does not actually generate orgone, in the truest sense of the word, but I suppose that is a technicality. Orgonite, when excited
with other forms of energy, both converts a portion of the energy used to excite it into orgone energy, and draws additional orgone energy from the
Aether (the cosmic omni potential ' pool'of orgone energy that has yet to be '
put to work'in 3D terms), and puts it to work as orgone manifest in 3D
terms. Thus for practical intents and purposes, orgonite 'generates'ORgone on demand when excited by scalar waves, magnetic fields, heat, sound,
light, electrical energy, kinetic energy, etc.
An orgone cleaner is a device that allows orgone to pass through it, and in the passing revitalizes the orgone energy. In addition to revitalizing the
orgone, cleaner devices which employ orgonite or other similar conceptual approaches selectively remove and add qualities form the orgone. Again,
there will be more articles at some point in the future which go into this matter further, but for now bear in mind that a cleaner is different from both a
generator and an accumulator. HHGs, TBs, and Chembusters are examples of orgone cleaners. Also, it bears mentioning that orgonite-based orgone
cleaners are not filters, though if overloaded of insufficiently grounded they will still function as filters. A filter picks the bad stuff out and collects it, and
you have to periodically clean or replace the filter. Some folks have found that when their HHGs are not grounded well enough, the they have to
periodically refresh them by sitting them on the earth or in running water for a few hours. But, if the HHG is in contact with earth or moving water, or
connected electrically to the house electrical ground (I' ll be producing a kit for this so you can modify your HHG easily at home... still in the testing
phase, looks promising so far... and of course I' ll post instruction so you can do it even if you do not want to buy it from me hahaha), then the HHG
actually converts the bad stuff into good stuff, as opposed to just filtering it out. That is the chief benefit of orgonite-based orgone cleaners, and that is
what they are designed to do, and that is what they do when they are constructed and installed properly.
An orgone accumulator is rather like a big capacitor. It is a device, usually in the form of a closed container, which collects the orgone energy from the
surrounding area and stores it inside the container. Like a capacitor, an ORAC will collect as much orgone ' pressure'as it can hold, and then it will
release some of the orgone so that more can come in. Therefore, it runs cyclically, if often the cycles may be days and months apart, instead of the
fractions of a second which we call Hertz when considering the cycle duration of electrical capacitors. Unlike orgonite, an ORAC does not process the
orgone, so it can collect a store of orgone on the inside of it which is either good for you or bad for you, depending on the condition of the orgone energy
fields in which it is located. It will just collect whatever kind of orgone energy is around it. It is a good idea to have an HHG or TB inside your ORAC if you
plan to build one, since most of our electrical grid produces a kind of orgone energy that is unhealthy, and ORACs operated within the EM fields
produces by electrical appliances or high tension power lines tend to become saturated with this unhealthy orgone. Thanks to the higher levels of
masonry for the decision that 60 Hz is the frequency of alternating current we use in North America. In terms of pulse rate, orgone is not in a healthy
state when it pulses at 60 cycles per second (orgone energy will often pulse in sympathy to an electrical current which passes through it. 60 cycle
electricity passes through the earth' s orgone fields and puts them into a state which is more or less inimical to most living organisms). Of the places in
your home to place an HHG, near your electrical mains (don' t shock yourself and don't sue me. i mean to put it near the mains, not electrically connected
to them) or fuse box is a likely candidate.
An ORAC is able to collect the energy because the sides of the container are composed of alternate layers of metallic and organic material. This
arrangement of layers produces something like an orgone ' diode' . It is easier for the orgone to travel one direction through the lamination of metallic and
organic layers, and much harder for it to travel in the other direction. So, like a diode, the layers move orgone in one direction. Build a box out of this
material, and it will collect and condense orgone on the inside, since it can get into the box much more easily than it can get out. The ORAC was
invented by Wilhelm Reich about 70 years ago.
Another thing to bear in mind is that TBs, HHGs, and chembusters will, to some degree, respond to the energy environment around them, becoming
more active when there is a lot of DOR or unbalanced, harmful life energy around them, and less active (unless excited) when there is little problematic
energy around them. They also respond to large potentials of healthy life energy when they are near them, and will often appear to sit inactive when the
energy around them is relatively clean and undisturbed. If you are using an HHG to charge water, for example, it is a good idea to use sound or light to
stimulate it, so that you can make sure it is active. Assuming you have the proportions of metal and resin correct, and the particle size of the metal is
within working parameters, It is not possible for a TB or HHG to become saturated with DOR the same way as an ORAC because the orgonite has a
quality of processing the orgone from one state to another, whereas an ORAC does not. I and several other use TBs to keep our ORACS clean, and
(with a TB in it) I have been using a small cylindrical ORAC less than two miles from a large power line without any problems, this for years now (a/o mar
2004).
4
Chembusters and Cloudbusters
There is a lot of controversy on this subject now, and to be honest I consider it important to distinguish between a Croft-style Chembuster and a Reich-
style Cloudbuster. After having had a chance to experiment with both devices, I find that they are indeed different in function. A Cloudbuster is a device
invented by Wilhelm Reich about seventy years ago, and it uses orgone energy to influence weather patterns. It is basically an array of parallel pipes
which are in turn connected by means of rubber or other organic hoses to either an ORAC or a body of moving water. It relies on the circulation of
orgone energy within the water bodies of the earth to clean the orgone by virtue of the action of moving water over stone, this action takes place in
riverbeds especially. A Chembuster (or Croft-style Cloudbuster) is a slightly different device, which is based on the Cloudbuster in that it uses a parallel
array of pipes to channel orgone energy, in order to affect the weather patterns in the area around it. The main difference between a Cloudbuster and a
Chembuster are that a Chembuster has a ballast of orgonite, while a Cloudbuster is grounded directly from the pipes to the earth, or water. And since
orgonite processes orgone energy instead of simply collecting it or moving it around a Chembuster cleans the orgone as it passes through. A
cloudbuster does not.
Although both Cloudbusters and Chembusters generally pull orgone in the form of DOR down from the atmosphere and channel it into the Earth, it is
possible for both devices to work in the opposite direction and send orgone form the Earth into the atmosphere. In both cases, it is the changing orgone
fields which affect weather patterns. I do not approve of novices using Reich-style Cloudbusters, but I do approve of just about anyone using
Chembusters. This is because a Chembuster is a great deal more user-friendly than a Cloudbuster. A Cloudbuster, used carelessly, can cause
tornadoes, imbalances in the earth' s orgone fields, and torrential rains or severe droughts. It is nonetheless a very useful device, but one which requires
knowledge both of meteorology and orgonomy in order to operate beneficially. The Chembuster, on the other hand, functions more like a ' safety release
valve'between the earth and atmosphere, so that it becomes more active when there is a large unbalance in the ambient orgone fields and less active
when the energy around it is in a balanced and healthy state.
I have some other articles coming which go into this matter further, but for now suffice it to say that you can cause problems with a Cloudbuster if you do
not know what you are doing, but this is not true of a Chembuster, and that is because a Chembuster uses orgonite and quartz crystals to clean the
orgone as it passes through, whereas a Cloudbuster does not. It is possible to further enhance the function of a Chembuster by grounding it to the earth.
After experimenting with it for some time, I generally ground the orgonite base of my Chembuster instead of grounding the pipes, because if you ground
the pipes, then the device will appear to work more rapidly, but what it is actually doing is dumping the excess
DOR into the ground rather than cleaning it. In my opinion, grounding the copper pipes directly is no better than a Reich style cloudbuster, because it is
just dumping the DOR into the ground. If you are doing this, then you ought to add some HHGs and TBs or equivalent right near the ground wire where it
enters the ground. Also, a wet ground is better than a dry ground. It is better to ground the Chembuster to moving water or wet earth than to dry earth. If
you are grounding it to dry earth, you should use a long wire to maximize contact with the earth. You can either attach a length of copper wire to the
orgonite, or just cut the bottom out of your bucket and let the orgonite touch the earth.
Orgonite Density
Not all orgonite is the same. The size of the particles used makes a lot of difference to the finished product. Below is a short description of some of the
different grades of orgonite with which I have worked. Orgonite can be used for different devices, and the intended function of the device determines
what kind of orgonite is best to use. Different materials offer differing amounts of resistance to the orgone as it flows through it, and the different grades
of orgonite have sequentially higher 'orgone resistance'values.
LD - Low Density Orgonite
Low Density orgonite offers very little resistance to the orgone as it flows through the device. This means that the device is not very suited to cleaning
the orgone, it will not convert DOR to OR with much efficiency. But, since it attracts the orgone and allows it to flow through it very easily, low density
orgonite is useful for sending and receiving orgone energy, and for collecting and moving orgone energy from one place to another. One place I often
use LD orgonite is to make a channel or layer of LD orgonite within an orgone device, which acts like a wire to conduct the orgone along a chosen path
inside the device. LD orgonite also works well as an orgone ' antenna'to send and receive orgone energy within a network of devices. LD orgonite does
not work well on its own for making TBs and HHGs, but a thin layer of LD or VLD (Very Low Density) orgonite at the base of an HHG or TB assists the
device in grounding to the earth more efficiently. LD orgonite will release some orgone when excited, but not very much.
MD - Medium Density orgonite
MD orgonite offers enough orgone resistance to foster the cleaning action for which orgonite is well known, and works as a material from which to make
TBs and HHGs. MD orgonite has a dense enough matrix to convert DOR to OR, but does not work very efficiently in an orgone-on-demand generator. It
offers low enough orgone resistance to function well in a passive mode, and high enough orgone resistance to still afford the ' scrubbing'action which is
desirable. MD orgonite will release some orgone energy when excited by external energy sources, but like LD orgonite, still not very much. The orgone
resistance is low enough in MD orgonite that much of the energy used to excite it either passes through it or is attenuated. It is more suited to use in
devices which are meant to operate in a passive mode. TBs, HHGs and Chembusters are generally meant to operate in a passive mode. While MD
orgonite may not be the absolute best thing from which to make TBs and HHGs, it will work nonetheless.
5
MHD - Medium High Density orgonite
MHD orgonite is imo the most efficient type of orgonite from which to make TBs, HHGs, Chembusters and other devices which operate in a passive
mode. MHD orgonite offers just low enough orgone resistance to operate in a passive mode, but offers high enough orgone resistance to maximize the
'scrubbing'action while still in a passive mode. MHD orgonite will convert DOR to OR efficiently without being excited by external energy sources (other
than a potential of DOR to convert into OR). Because of its higher density, MHD orgonite will also release orgone when excited, and it will do so with
more efficiency than MD orgonite. MHD orgonite works well to construct devices which are intended to operate in both passive and active modes. The
spaces between the larger particles are filled with smaller particles. This is also the grade of orgonite that I make my HHGs and TBs from now. See the 3
small pics below? MHD orgonite can be gotten by either using smaller particles, as in the two cases on the left and center, or by adding superfine
particles to the resin and then using larger metal particles which would ordinarily produce MD orgonite. Either way will produce MHD orgonite. I use
about 2 teaspoons of mineral ' flour'to a liter of resin.
HD - High Density orgonite
HD orgonite offers a much higher orgone resistance than MD or MHD orgonite. The scrubbing action provided by HD orgonite is plentiful, provided it is
excited in some way. TBs and HHGs made from HD orgonite need to be placed in an area with extreme inimical energy problems if they are to do much.
They also benefit from being electrically grounded, though I suppose it is not absolutely necessary. TBs and HHGs made from HD orgonite can be a bit
smaller than ones made from MHD orgonite, and still do the same job, provided they are excited in some way, either by external energy sources or by a
LARGE potential of DOR to convert into OR. One place in which TBs and HHGs made from HD orgonite work well is on or near household electrical
appliances. To make a long story short, HD orgonite processes orgone more efficiently than MHD orgonite, but you need to ' push on it'in order for the
orgone to go through it very fast at all. There are few if any large particles, and that there is not very much space between them. HD orgonite does not
work very well for devices which are meant to operate in a passive mode, but it does work well for devices which are meant to operate in an active, or
'
powered'mode. HD orgonite works well to make orgone-on-demand generators which convert other forms of energy such as heat, light, sound, EM or
scalar waves into orgone. HD orgonite works well to make intent amplifiers. HD orgonite can also be used inside an orgone device made from lower
density orgonite to control the pattern of energy flow by offering more resistance at select places inside the device, acting like an ' orgone pressure valve'
so that orgone will not pass through it until it has reached a sufficient intensity. HD orgonite is the highest density at which orgonite will work both in the
passive and active modes, but is more suited to the active or ' powered'mode.
XHD - Extra High Density orgonite
XHD orgonite does not work very well in a passive mode, and does not appear to be doing much of anything until it is excited by some form of external
energy. When excited by heat, light, physical motion, sound, EM fields, electrical current, scalar waves, etc., XHD orgonite is VERY efficient at producing
orgone energy. XHD orgonite has uses in the internal composition of orgone devices built from lower densities of orgonite, just like HD orgonite, but is
especially suited to making orgone-on-demand generators which are designed to operate in an active or ' powered'mode. Note the particle size, all of the
have gone through a 1 mm sieve, the largest are about 1.5 x 1 mm, and the majority of the particles are in the form of a fine powder like flour. When
making HD or XHD orgonite, you can add the organic part of the orgonite in the form of small particles, and just use enough resin to hold the mass
together. While XHD orgonite works very well for making devices which operate in an active mode, it does not work very well at all for devices which
operate in a passive mode, except as a small part of the finished device.
Different materials for making orgonite
While many people now use polyester resin and metal particles from a machine shop, there are many different materials from which orgonite can be
made. In my experience, not all of these combinations produce a very durable substance, but in some cases produce more orgone than the basic
polyester resin and metal filing mixture
Cheap orgonite from waste paint
An extremely cost-effective and colorful variety of orgonite with which I have been experimenting. The orgonite is not especially durable, and needs to be
kept indoors or recast in plastic resin to seal it from the elements. It is made from old latex paint (often free at recycling depots) and commercially
available waste paint hardener ( about $3.00 CDN for enough to do 2/3 of a gallon). The waste paint hardener is in the form of a small packet of crystals
which, when mixed into the paint, cause it to solidify. The metal has to be mixed into the paint prior to adding the hardener, since it turns stiff almost
immediately. The mixture then takes several weeks to dry fully in a large casting like the 3.5" blue TB (with kyanite from revted ;) shown. This can be
quickened by making the mixture and spreading it out into a thin sheet, allowing it to dry, and crumbling it into small pieces like the two shown on the
right of the picture. The small pieces can then be combined in different colors and recast with just enough resin to hold them together. Doing it this way,
you can reduce the cost of polyester resin by 50 to 70 percent, but it takes a lot longer.
Another orgonite recipe is made from polyester autobody filler, mixed with metal shavings and a little aluminum roof patch paint. You have to work
quickly, and mix in the metal and paint before adding the catalyst to the autobody filler. While this kind of orgonite is not ideal for TBs and HHGs, it has
the advantage of not leaking out of small holes in the molds, and therefore is useful for some hard-to-cast shapes, as it can be forced into the mold in
small amounts with a spoon or spatula.
6
A few notes about using fine powders in orgonite
You don' t need to have NASA grade powdered quartz or ultra fine metal particles. You can use them, but you can also make your own. I make most of
my own. One source of copper powder that is easy to get is copper spray paint. Get the cheap kind that rubs off on your fingers after its dry. It is
basically metal flakes, solvent, and a little oil. When the solvent evaporates, you are left with fine metal flakes and a little oil. Just spray it into the resin
and mix thoroughly. Of course, you have to mix the fine powders into the resin before you pour. Also, if you are using any of the following powders (and
probably a few I don' t know about)...
copper
paramagnetic earth with high iron content
rust (iron oxide)
white polyester pigment (titanium oxide)
decomposed chalcopyrite (oxidized copper and iron and sulphur)
decomposed iron pyrite (oxidized iron and sulphur)
...then you have to add a bit more catalyst than you normally would, since the copper and paramagnetic earth (some kinds, anyway) slow down the
curing (of POLYESTER resin) quite a lot.
There is no answer the question ' which is better, powder or shavings'because the two give different effects. That'
s kind of like asking whether apples or
oranges are better. In short, for an orgone generator (which technically an HHG is NOT) powder is better. For an orgone FILTER/CLEANER (which is
what an HHG is) powder can be used as an additive, and you will get a bit more out of it.
If you are trying to make HD orgonite at home, and have problems with the powder settling out, then you can do two things: 1... use less resin! 2... add
the organic to the mix in a powdered form and then just use enough resin to stick it all together. To make the higher densities of orgonite, you have to
actually mix the ingredients, you cannot just pour the resin over them. Mix all the dry stuff up in a vessel, and then add it to catalyzed resin. Use enough
powder that you get a slurry, like oatmeal. Just use a little resin. However, for hhgs and tbs, unless you are gonna put them in a really bad spot or make
sure to ground them by burying or tossing in water... you don' t want it to be ALL powders. HD max, not XHD. Also, you can make the TBs a bit smaller if
they are made from HD than the minimum size they would need to be if they were made from MD. A CB made with HD is a bit different because the
pipes create a bit of flow, so there is something to push (or pull) the orgone through the orgonite. Depending on how you have it set up and configured, it
may work really well, or not very well at all. Even so, it is possible to get the density too high and '
plug up'the device. I have had that happen before. If
you can figure out a way to stimulate it enough, then it will work. One thing you can do is increase the diameter of the pipes a bit to compensate for the
density of the ballast. The push or pull provided by the pipes of a CB can act as stimulation for the orgonite if it is of sufficient intensity.
There is one density rating that belongs to the orgonite. Then there is another density rating that belongs to the device as a whole. Ideally, the orgonite
density of a TB should be as high as you can get it before it starts to ' plug up'. If you make it too dense, and expect it to work in a passive role, then you
will get all discouraged perhaps and say 'it doesn't work'... but that will be because you are basically trying to use a pressure release valve set at 500 psi
to relieve 20 psi of peak pressure, understand? Orgonite made with fine particles (high density) works just fine, as long as you use it right. ;)
Anyway, for a TB, the orgonite density should be as high as you can get it and still work, but the overall device density should be a bit lower, so that it
will allow energy to flow through it relatively easily. A simple way to say this is the more orgone resistance the device has the better it cleans, but the less
orgone resistance the device has, easier energy can flow through it. So you have to find the ' sweet spot'in that range. Imo, for things like TBs and HHGs
(as opposed to radionics outputs, pulsers, powerwands, etc) that ' sweet spot'is what I call '
MHD'which stands for ' medium high density' . I also make HD
(high density) towerbusters, and they work great... as long as they are deployed CORRECTLY which means being either:
A... right on top (metaphorically speaking) of the tower, or on top of your monitor, or TV, or something else which makes a lot of EM noise...
or B... well buried and spread out a bit in the pattern of gifting.
For HHGs and TBs, what most of us do is to use fine powders as an additive to larger metal particles. Doing this enables us to adjust the density of the
orgonite to hit that '
sweet spot'and/or add other energy signatures to the output of the device. So, some people say ' powders are garbage, they don' t
work'because they try to make TBs with only powders, the density is too high, and (no surprise) it doesn' t work. And others say ' well, Welz uses
powders so they must be good' . Well... Welz doesn't make devices that have to function in a passive sense, or at least that'
s not what he's known for. He
is not known for making HHGs and TBs. Welz makes devices that use EM (Electro-Magnetic) stimulation to translate EM into orgone, which he then
integrates into a radionics machine' s output stage. That's why he uses HD/XHD orgonite in his devices. And that' s why in devices like my pulsers, ring
generators, and so forth, I also use higher densities.
7
Ingredients for orgonite
Here are some of the ingredients I have worked with in orgonite, and a brief description of their properties according to my opinion and observations. All
pronunciations of usefulness for a given purpose are my own views and based on my own perceptions. I am not giving you medical advice. I am not a
medical doctor, but there' s a good chance you may be ;) Experiment and form your own opinions. I will do my best to update this page from time to time.
By no means are all possible ingredients listed here, nor are all the possible effects of the ingredients listed here. This list is my opinion, and is a work in
progress. There are many different ingredients being used in orgonite. There are many different recipes of orgonite being used. Some perform better
than others all around, and some perform better for a single purpose. In terms of energy work and metaphysics, whatever minerals are included in the
orgonite will, to some degree, impart their energy qualities to the orgonite. The same holds true so far for the energy effects of hertzian frequencies,
sounds, colors of light and energy impressions via reiki work or other traditional metaphysical discipline in application. The rate of success with this
effect, the orgone signature programmed into the orgonite while it cures, seems to vary. In other words, say you have a little piece of turquoise that you
like to use for body work. Or perhaps it is rose quartz. I dunno, it' s up to you. Say this little piece of turquoise you have is 1 cc. 1 cubic centimeter. Say
you cast it inside of 10 cc of orgonite. Well, now it's like you have between 1.5 and 7.5 cc of turquoise to work with. Suppose you are really finicky and
you match the recipe of the orgonite to the turquoise, use minerals and metals that the turquoise likes in the orgonite, and maybe charge the orgonite
with the energy signature of turquoise while it cures. Now, it' s like you have 11 or 12 cc of turquoise to work with, all from that little 1 cc chunk of
turquoise cast inside the orgonite. There are people in the world who know a lot more about the specific effects of various frequencies and minerals than
I do, and in fact there is really a substantial body of information on the web dealing with the specific energy effects of minerals, colors, and frequencies.
Point being, most or all of this knowledge is transferable to working with orgonite, and orgonite is complimentary to these already well established means
of working with energy (sounds, colors, frequencies, minerals, etc.).
NOTE - Primary indicates that it can be the main ingredient of it's type, and secondary indicates that it can be used as an addition to the orgonite, but
should not imo be used as the main ingredient of it's type.. For example, a TB would have to have at least 1 primary ingredient each (or equivalent not
listed in the tables below) from the minerals, metals, and organics tables below. Coloration refers to the 'colors' of orgone that a given substance is
harmonic to. I am using the same old 7 spectral colors system with which so many of us are familiar.
Minerals for orgonite:
Mineral Coloration Primary Secondary Effect
Focuses and directs energy within the orgonite. Holds a program.

The basic standby in TBs and HHGs, pulsers, succor punches,
Quartz Crystal All chembusters, radionics machines and other orgone devices. Is like
the master crystal which will respond to some degree to virtually any
orgone energy signature, regardless of color or frequency.
Enhances overall function of the orgonite. Increases the output and

Quartz Powder All responsiveness of the orgonite. Can be used to adjust the density of
the orgonite.
Provides some coloration. Useful for healing. Useful for cleansing

Selenite Crystal White, Blue, Cream and invigorating.. Holds a program. Similar effects to kyanite but a bit
more gentle.

responsiveness of the orgonite. Provides some coloration and is
Selenite Powder White, Blue, Cream
useful for healing and cleansing. Can be used to adjust the density of
the orgonite.
Focuses and directs energy within the orgonite. A workable

substitute for quartz in TBs and HHGs, with the condition that it
significantly colors the output into the blue and violet range.
Violet, Blue, Silver, Produces a surprisingly sharp energy considering it is mostly in the
Kyanite Crystal
White blue range. Useful for cleansing. Similar to selenite bit more sharp
and stronger cleansing influence. Holds a program sometimes, but
program parameters are limited to those harmonic to the coloration of
the mineral.

Violet, Blue, Silver,
Kyanite Powder responsiveness of the orgonite. Can be used to adjust the density of
White
the orgonite. Retains most of the properties of kyanite xtals.

significantly colors the output into golds, yellow and some reds,
Citrine Crystal Gold, White, Yellow, Red
depending on how darkly colored the specimen is. Holds a program
sometimes, but program parameters are limited to those harmonic to
the coloration of the mineral. Useful for cleansing and invigorating.
8
Minerals cont.
responsiveness of the orgonite. Can be used to adjust the density of
Citrine Powder Gold, Yellow, Red
the orgonite. Provides some coloration to the orgonite. Gives a nice
warm feel to the energy.

significantly colors the output into the violet and gold range. Useful
Amethyst Crystal Violet, Blue, White, Gold for healing, and for divining, and for cleansing. Holds a program
sometimes, but program parameters are limited to those harmonic to
the coloration of the mineral. Useful for divining. Useful also for self-
searching.

Amethyst Powder Violet, Blue, Gold
the orgonite. Imparts some of the effects of amethyst xtals to the
orgonite.

significantly colors the output into the red range, but a light red, more
Rose Quartz Crystal Pink, White, Red, Violet like pink. Soothing and healing energy, surprisingly mellow
considering it is mostly in the red range. Holds a program sometimes,
but program parameters are limited to those harmonic to the
coloration of the mineral. Invigorating.

Rose Quartz Powder Pink, Red, Light Blue
the orgonite. Gives a people-friendly, smooth feel to the energy.
Invigorating.

Gold, Brown, Green, substitute for quartz in TBs and HHGs, with the condition that it
Smoky Quartz
White significantly colors the output into the reds and browns and golds.
Strongly masculine energy. Useful for diving and protecting.
Soothing and healing, useful for pain reduction and physical healing.
Strong feminine energy, good for healing and regrowth on many
Turquoise Blue levels. Some shielding action but imo more useful for stimulating
recovery from injuries physical or energetic. Strong synergy with
blood coral and hematite. Increases orgonite' s connection to water.
Strong connection to the earth imparts a ' stability'to the energy from
the orgonite. Increases orgonite' s capacity to drain away harmful
energy by increasing device' s mean energy flow capacity. Use as a
Hematite Black, White
grounding stone in place of / in addition to electrically grounding the
orgonite to earth. Strong synergy with many minerals, especially imo
turquoise and blood coral. Somewhat invigorating.
Very high energy output from this stone for a variety of possible
Lapis Lazuli Gold, Blue, Red, Violet uses. Too much to go into here. Potent and worth reading upon
elsewhere. Invigorating. Manifesting.
Garnet Red Provides coloration into the red range. Synergy with amethyst.
Provides coloration into the green range, and sometimes into the
blue or violet range. Rounds the feel of the energy. Assist orgonite
with absorbing program while curing. Useful for healing. Does not
Fluorite Blue, Green, Violet hold and execute program terribly well, but stores an impression
rather well. Useful as a means of transferring energy signatures from
one device to another or storing them for future use. Increases
orgonite's connection to water.
9
Minerals cont.
Mica Green, White the orgonite. Sharpens the feel of the energy from the orgonite. Can
be used as an organic. Provides coloration into the high green range.
An energy "astringent".
Strongly increases orgonite' s mean output. Provides some grounding

Varies, Generally
action similar to hematite, pyrite and chalcopyrite. Increases
includes Red and up the
Paramagnetic Earth Chunk orgonite's responsiveness to electromagnetic stimulation. Sometimes
spectrum to a variable
invigorating, sometimes soothing. Depends on actual earth being
height.
used.
Provides strong coloration into the blue and violet ranges. Similar to
Azurite Blue, White, Violet kyanite in that it is a sharp blue, not a soft blue. Strong synergy with
malachite.
Provides coloration into the green range. Strong synergy with azurite.
Malachite Green A relatively sharp kind of green energy, useful for cleansing and
invigorating.
Focuses and directs energy within the orgonite. substitute for Quartz
Yellow, Brown, Gold, in a pinch, but tends to flow more slowly than if quartz were used.
Agate
White Strong connection to earth and fire, useful for some
protective/shielding influences.
Imparts a lovely smooth 'creamy'feel to the energy hahaha. Useful

Pearls Gold, Silver, Cream for cleansing and invigorating. Increases orgonite connection to
water somewhat. Helps to bridge between fire and water.
Very masculine energy. Coloration into both green and red ranges.
Bloodstone Red, Green Useful for soul- search and overcoming obstacles. Tends to be
invigorating, perhaps too much so for some.
Focuses and directs energy within the orgonite. A poor substitute for
quartz xtal, but useful as a means of controlling energy flow within a
Glass All device, especially if faceted. Tends to give the energy a bit of a
rounding/mellowing effect, and gives some coloration of the orgone if
it is colored glass.
Focuses and directs energy within the orgonite. A slightly Better

substitute for quartz Than Cut Glass, But still not as good as quartz.
Quartzite White, All
Recommend using at least 3X the mass you would if you were using
Quartz Xtal.

Quartzite Powder White, All responsiveness of the orgonite. Can be used to adjust the density of
the orgonite.
Provides coloration into the red range. Strong synergy with turquoise
Blood Coral Red and hematite. A gentle masculine to balance the strong feminine of
turquoise. Increases orgonite connection to water somewhat.
Tourmaline Red Red, Blue Provides coloration into the red range. Gentler than garnet.
Provides coloration into the green range. Gentle and soothing

Tourmaline Green Green, Blue
energy.
Increases orgonite' s capacity to drain away harmful energy by

increasing device' s mean energy flow capacity. Use as a grounding
Brown, Gold, Yellow,
Tiger Eye stone in place of / in addition to electrically grounding the orgonite to
Red
earth. Useful for manifestation and repelling unwanted influences.
Useful also for self-searching.
Increases orgonite' s capacity to drain away harmful energy by

Dark Red, Gold, White, increasing device' s mean energy flow capacity. Use as a grounding
Pyrite Chunk
Black stone in place of / in addition to electrically grounding the orgonite to
earth.
10
Metals for orgonite:
Metal Coloration Primary Secondary Effect
High frequencies. Healing, and lifting of mind upwards. Head in the

clouds. Useful for divining, soul-searching, overcoming obstacles,
Gold Gold, White, All
and of course purification. Increases orgonite's response to intent
stimulation.
Very wide response range of frequencies. Boosts flow of orgone

Copper All, Blue, Red through device by increasing dynamic action within orgonite matrix.
Gives a smooth feel to the energy. Strong synergy with steel or iron.
High and subtle effects. Quite potent, but may be difficult for some to
feel. Good for clearing. Not so good for grounding. Increases
Brass Gold, Silver, White, Blue
orgonite's response to intent stimulation. Boosts flow of orgone
through device by increasing dynamic action within orgonite matrix.
Provides strong coloration into the blue range. Increases orgonite'

s
Cobalt (in blue glass) Blue, Silver, White connection to water. Boosts flow of orgone through device by
increasing dynamic action within orgonite matrix.
Similar to brass but a bit lower on the scale. Increases orgonite'

s
Bronze Red, Gold, Blue, Red response to intent stimulation. A bit more grounding influence than
brass.
Similar to copper but a second to copper in terms of the feel of the

Aluminum All, White, Blue energy. A wide range of frequency response and coloration. Strong
synergy with steel or iron.
Very high frequencies, and relatively sharp energy. Good for

dissolving blockages / clearing / energy astringent. Boosts flow of
Titanium White, Silver, Gold
orgone through device by increasing dynamic action within orgonite
matrix.
Provides stability to the energy signature of the orgonite. A relatively

Steel Blue, Red, Black low response range. Provides some grounding influence. Increases
orgonite'
s responsiveness to EM stimulation.
Provides stability to the energy signature of the orgonite. A very low

response range. Provides more grounding influence than steel.
Iron Red, Blue, Black
grounding influence. Increases orgonite' s responsiveness to EM
stimulation.
Strongly increases orgonite's response to magnetic stimulation.

Some grounding influence. Boosts flow of orgone through device by
Bismuth Blue, Brown
increasing dynamic action within orgonite matrix. Increases orgonite'
s
responsiveness to intent stimulation.
Very low response range. Provides some stability to energy signature

Lead Black, Silver
of orgonite. Some synergy with copper and gold.
Increases synergy between magnetic and non magnetic metals.

Strong synergy with copper. Strong catalyst in energy terms, good for
Zinc Silver, Blue
manifestation. Boosts flow of orgone through device by increasing
dynamic action within orgonite matrix.
Dark Red, Gold, White, Provides a grounding, stable note to the energy form the orgonite.
Iron Pyrite
Black Gentler and a bit rounder feel to the energy than steel or iron.
Provides some grounding and some uplifting action to the energy

form the orgonite. Since it is a combination of iron and copper, it
possesses the synergy between these two metals in its natural form.
Chalcopyrite Gold, Red, Blue, White
Gives a pleasant smooth and potent energy if used alone, mellows
the output and increases the response range of the orgonite if used
as an additive.
11
Metals cont.
Strongly increases both the orgonite' s connection to the earth, and
Varies, Generally the orgonite's responsiveness to EM stimulation. Increases the
includes Red and up the orgonite's responsiveness to intent stimulation in some cases. May or
Paramagnetic Earth Powder
spectrum to a variable may not carry it's own potent energy signature to impart to the
height. orgonite. Varies greatly from place to place. Boosts flow of orgone
through device by increasing dynamic action within orgonite matrix.
Organics for orgonite:
Organic Primary Secondary Comments
Wonderful smooth feeling energy. A bit nicer than polyester resin, but less durable. Better imo
as a primary than a secondary. I make a fair amount of stuff out of pitch. Will melt in the sun so
Pitch
must be kept indoors or buried. Is ideal for water gifting. Does not dissolve in water. Absorbs a
charge well during curing. Strong connection to earth and water.
A workable if not ideal organic primary. Energy output is less than pitch or polyester, and device
Beeswax
must be contained somehow. Works better when cold.
Paraffin Wax Much less functional in orgonite as primary than natural wax. Dunno why.
Carnuba Wax A little mixed into the pitch gives it a bit '
brighter'feel.
Gives a warm, comfortable, people-friendly feel to the energy when mixed with polyester based
orgonite. Often provides coloration according to the color of the paint, but not always. Depends
Latex Paint with hardener on the chemistry of the paint. With waste paint hardener added, it is a slightly better primary than
added wax, but not much. Excels as a secondary with polyester., Useful as a means of transferring
energy signature form one botch of orgonite to another, for lightening the weight of the orgonite,
or for adjusting the density of the orgonite. Absorbs a charge well during curing.
Gives a warm, comfortable, people-friendly feel to the energy when mixed with polyester based
Flour
orgonite. Can be used to adjust the density of the orgonite.
Acrylic Plastic A somewhat smoother feeling yet much more expensive alternative to polyester resin.
The basic standby against which I measure other organics. Provides some coloration according
Polyester resin
to the chemistry of the resin. Absorbs a charge well during curing.
Imparts to varying degrees the energy signature of the plants used to the orgonite. Useful for
Vegetative Matter reproducing in orgonite the effects of various herbs. Recommend using well dried, evenly and
finely shredded vegetative matter.
Can be used to permanently link a body of orgonite to an individual. Caution advised. Useful for
Hair
custom work or tailoring a device to a specific user.
Can be used to permanently link a body of orgonite to an individual. Caution advised. Useful for
Blood
custom work or tailoring a device to a specific user.
Dirt In small amounts can be used to adjust the density. Increases the orgonite'
s connection to earth.
Can be used to impart the energy signature of a given incense to the orgonite, if not always the
Incense
smell.
Have not tried this myself yet, but some are reporting success with sugar (hard candy) as an
Sugar
alternative to polyester, similar to pitch.
Honey Adds a soft, high frequency overtone to the orgonite.
Carbon Adds a strong grounding influence to the orgonite.
12
Recipes for orgonite:
Here are some different kinds of orgonite I have been playing with. All pronunciations of usefulness for a given purpose are my own views and based on
my own perceptions. I am not giving you medical advice. I am not a medical doctor, but there' s a good chance you may be ;) Experiment and form your
own opinions. You are responsible for your own safety. Note - "resin" in recipes refers to catalyzed resin, if applicable. In some recipes, extra catalyst is
needed, and given as a percentage value above the regular mix ration. Eg. catalyst +10% means to use the normal amount of catalyst, plus an extra
10% on top of that. The normal resin / catalyst ration for your resin is generally marked on the side of the container you bought your resin in. Particle
sizes are given as follows : fine = 0 - 1mm dia., small = 1 - 5 mm dia., large = 5 - 15 mm dia. Proportions of ingredients are approximate.
Basic LD
Ingredient Amount in parts Process Comments
Copper - Fine .05 - .1 Useful for creating a path of lower resistance
inside of a device, in order to control the flow
Quartz Powder - of energy. On a more basic note, all HHGs and
.05 - .1
Fine Mix the catalyst into resin. Add all other TBS benefit from a thin layer of something like
ingredients, stirring continually and pour this at their base. Also works nice as cosmetic
Resin 1
into mold. second coat for orgonite pieces, and has a bit
more output than if just resin were used for the
Catalyst +50% second coat. Also some applications in linking
modules for radionics devices.
Basic MHD
Aluminum - Large 1.5 Mix dry steel and aluminum together. A good all-purpose orgonite recipe. Other
Place mixture into molds. Add xtals / items can be added as desired.
Steel - Small 1
other internal components as applicable.
Quartz Powder - Mix catalyst and resin. Add Quartz
.01 - .25 Powder to catalyzed resin and stir
Fine
thoroughly. Pour resin Over metal
particles and allow to seep down.
Resin To fill molds Repeat layers as necessary.
Basic HD
Steel - Small 1 A good basic recipe for use in either heavy-
duty TBs and HHGs, or in actively stimulated
Secondary metal - orgone generators. Different primary and
Fine secondary ingredients can be used as desired.
.1 - .25 Mix all dry ingredients together
.
thoroughly. Add catalyzed resin a bit at a
(copper or pyrite or time until there is enough resin to just
bronze suggested) cover the surface of the particles. The
Resin .75 - 1.15 mixture should have the consistency of
thick oatmeal, and have just enough
Catalyst resin that all the particles are covered.
Allow it to sit for a few minute. If there is
more than 1/8" (2mm) of resin covering
(if using copper or +50% the surface of the particles, add more
paramagnetic earth
steel until the mixture is an even thick
)
slurry like oatmeal. Pour into molds. Stir
Secondary Mineral constantly, including while pouring.
.1 - .25
- Fine
Secondary Organic
.1 - .25
- Small
13
Basic XHD
Primary Metal - The particles must be fine enough to A useful recipe for making orgone generators
1
Fine suspend in the resin. One way to deal designed to be driven by outside power
with it if this is not the case is to catalyze sources like zappers, magnetic pulsers,
Secondary Metal - the resin, wait until it gels, and quickly radionics machines and so forth. Also useful in
1
Fine mix in the other ingredients. Another is making small orgonite devices to be carried in
Resin 3-4 to use a thickening agent. In some a pocket and handled a lot.
cases, the thickening agent and the
Secondary Organic secondary organic can be the same.
1.3
- Fine
Quartz Powder - Premix all dry ingredients thoroughly,
.4 and the add the dry ingredients to the
Fine
catalyzed resin, stirring continually. Add
Secondary Mineral the dry ingredients a bit at a time. You
.3
- Fine should get a creamy thick liquid that
pours slowly into the molds and still is
liquid enough to smooth itself off at the
surface. If the particles are settling out,
Catalyst if using there is too much resin. Usually, resin to
+ 30% - 50% dry ingredients should be about 1 to 1,
copper
sometimes a little more or less
depending on the absorbency of the
secondary organic.
Basic EHD
Primary Metal - It may take a bit of messing around to get this
1 Mix the catalyst into the resin. Add the
Small recipe working right, but it has (especially
fine ingredients to the resin. If it is not
when made with wheat flour) a gentle, people
Secondary Metal - thick enough at this point to suspend the
.10 friendly feel to it. This orgonite is good for
Fine primary metal particles, add a bit more
many things, since it basically behaves like
flour until it is.
Resin .75 - 1 MHD. EHD stands for expanded high density.
Good for devices which are meant to be used
Quartz Powder - Mix all the small ingredients into the indoors in living space, and / or handled by
.10
Fine resin, a bit at a time. It should come out people a lot. Useful for both passive and active roles.
looking like a thick slurry, with bits of
Secondary Mineral metal visible in it. The metal should not
.25 - .5
- Small all pile up on the bottom. Internal
Secondary components of devices (like crystals)
Organic - Fine need to be supported in some way
during curing since this orgonite will
.75 - 1 most likely not hold them in place during
(wheat flour curing like MHD will.
suggested)
14
Wood Sprite
Pitch Resin 2.5 - 3 Melt the pitch slowly over a heat source A lot of work, but well worth it. Strong
with no open flame. The fumes from connection to the earth, have gotten many
Chalcopyrite or melting pitch may be flammable. Don' t obvious reactions from animals when gifting
.5
Pyrite - Small burn yourself, wear gloves. Once the this kind of orgonite to natural energy centers.
Aluminum - Large 1.5 pitch is melted, Premix all the dry Also a nice kind to have indoors if protected
ingredients except for the citrine. Add form hot sun. Mixture will melt if exposed to
Steel - Small 1 the dry ingredients to the pitch and stir high heat.
well. Then add the citrine. Spoon
Paramagnetic carefully into molds and allow to
Earth - Small or .5 cool. You generally have a few minutes
Large only before the mixture sets up once
Dried Crumbled removed from the heat.
Sage or Chaparral .3 - .5
- Small Charge with either sunlight or a charged
water bath (or both) while cooling.
Citrine - Fine .01
White Light
Aluminum - Large 1 Produces a kind of MHD which is useful for
Mix the catalyst Into the resin along with
repelling unwanted entities / energies. Also
Titanium Oxide Enough to make the pigment. The resin should come out
useful for clearing blockages. Energy tends to
White Pigment resin opaque bright white and opaque. Place the
feel uplifting (as opposed to grounding) and
Large metal in the molds and sprinkle a
Steel or Iron - somewhat astringent.
.25 little of the small metal over it. Place
Small xtals if applicable and pour in enough
resin to cover the metal.
Copper or
Chalcopyrite - .25
Small
Resin To fill molds
Charge during curing with 741 Hz.
Catalyst +50%
Chocolate Shine
Steel - Small or Cosmetically appealing and highly EM
1
Large responsive HD or MHD orgonite. Good for
Mix all the fine ingredients together. Mix TBS and HHGS as well as generators. Has a
Brass or Copper - catalyst into resin and add fine warm feel to the energy. Especially suited for
.3 ingredients. If the steel particles are
Fine work on Geopathic lines, ley lines, Curry /
large, then place them in the mold and Hartman lines etc. Provided the paramagnetic
Paramagnetic pour the resin mixture over them stirring
.3 earth of is sufficient quality, this general recipe
earth - Fine as you pour. If the steel particles are has been proven to reduce EMF by
small, add them to the resin mixture and conventional testing.
Citrine Powder -
.05 stir constantly as you pour the mixture
Fine
into the molds.
Quartz Powder -
.1
Fine Charge with 15Hz and / or Schumann
Resin 1.25 - 1.3 frequencies while curing.
Catalyst +100%
15
Ivory
Copper - Fine .05 Produces HD orgonite that tends to exude a
Mix all the dry ingredients together. Add milky white color of orgone. Useful for
Titanium Oxide Enough to make the pigment to the resin along with the applications in reiki healing hands radionic
Pigment resin opaque catalyst. Sift the dry ingredients into the therapy body work etc. Useful for removing
resin, mixing continually, until you have blockages and stimulating energy circulation.
Paramagnetic an event consistency. You should have
.05 Orgonite tends to have affinity for human body
Earth - Fine a slurry with the consistency of oatmeal. and sunlight. Useful for active roles.
Copper or
Chalcopyrite - 1 Pour into molds and allow to set. This
Small recipe will usually support the internal
components at least somewhat, but is
Iron or Steel -
1 still thin enough to pour into complex
Small
shapes.
Selenite - Small .3
Resin 2.5 Charge with both high and low freqs
while curing.
Catalyst +100%
Water Baby
Blue latex paint The paint is a separate preparation that Produces MHD or HD with a strong affinity for
with or without has to be done ahead of time. Mix 10 water. Also can repeat the energy signature of
charged water drops per liter blue food dye with paint. charged water which was added to the paint.
.3 - .6
added. Paint must Then mix the kyanite powder into the Waste paint hardener or other granular,
be dried out and paint. Then mix at least .01 part charged absorbent material is useful to speed the
crumbled. water to 1 part paint and dye mixture. drying out process. Generally the paint takes
Add hardener to paint and / or spread several weeks to fully dry, so I set a bunch on
Chalcopyrite or paint out on Wax paper to dry. at time.
copper - Small or 1
Large
The paint has to be dry enough you can This kind of orgonite is pretty to look at if it
10 drops per L of crumble it into pieces. It does not have comes out right, and it is well suited to water gifting. It also has the
Blue food dye.
paint. to be fully dry as you will be encasing it quality of not containing any ferromagnetic materials, which is
in resin. Once the paint has dried useful for some applications. It is a bit less responsive to EM
Kyanite Powder .01
enough, crumble it into pieces about 5- stimulation than other kinds of orgonite, but it works very well for
15mm dia. (1/4" to 1/2"). charging water when placed in proximity to a glass vessel of water.
Mix the blue paint crumbs and the metal

(copper) together. Add catalyst to resin
and resin. Place metal mixture in molds
and pour resin over the metal.
Use turquoise or blue glass as the

At least 1 chunk secondary mineral.
Turquoise - Large
per unit.
Charge with the sound of running water

while curing, and if possible with
moonlight or other silvery blue light. In
general, charge in with cool energy as
opposed to hot energy.
Resin To fill molds
16
Orgonite and the curing process
In other articles, i have mentioned a few times that charging the orgonite while the resin is curing has a large effect. Here, i will go into that in a bit more
detail. All information given here is based on my own experiments / perceptions, and/or things which other researchers / orgonite users / colleagues
have confirmed. I am not a medical doctor, and you are responsible for your own discretion.
To start out with, not all organic components are not equally responsive to charging while the resin cures. Polyester resin, acrylic resin and pitch all
demonstrate this property in significant degrees. The waxes seem a lot less responsive in this area, something which i attribute to the formation of
crystalline structures within the resin while solidification takes place. Polyester resin, for example, is well know in conventional scientific circles to have
significant electromagnetic attenuation properties. That means that it absorbs electromagnetic energy. Since energy is never created or destroyed and
only changes form, the energy soaked up by the resin has to go somewhere, doesn' t it?
After experimenting for a couple of years, i can comfortably say that the way orgonite is treated during construction creates at least a 70% difference in
the finished product. In other words, by paying some attention to the thoughts, emotions, energies, ect to which the orgonite is exposed when you make
it, you can generally get at least 70% more functionality than you would if you did not pay attention to these factors.
Now, i would like to point out that the beauty of orgonite is that you can get that 30% functionality, regardless of how you make it. It is not NECESSARY
to charge the resin while it cures, it is an improvement. And in many cases, 30% functionality is more than enough to make a significant difference. But if
the orgonite can be made yet more potent, why not do so? If you can optimize the orgonite to work with a specific ailment, or to do a chosen task, then it
only seems prudent to do so.
There are, imo, 2 main ways in which the orgonite absorbs a charge / program while it is curing. One way is through the person making it, and the way
that they influence the energy while handling the materials. Another way is to expose the orgonite to energies generated by various metaphysical tools
while it cures. Obviously, both of these approaches encompass many different techniques. Both of these approaches can be used either alone, or in
combination with each other. Myself, i generally use a combination of the two.
It is also possible for the orgonite to turn out with either a sympathetic or a counteractive effect. The frequencies used in the following description are just
examples. So, if you expose orgonite to a hertzian frequency of say 15kHz, generated by a device of some kind, the orgonite will become more
responsive to that 15kHz frequency. The fact that the orgonite is now more responsive to 15kHz can be applied in one of two primary ways, depending
on what thoughts and intent you expose it to, or what other frequencies are present. If you expose the resin to 15kHz and leave it at that, the finished
orgonite will tend to amplify the 15kHz frequency effects when stimulated by it. It will tend to produce that frequency effect as part of it'
s output,
converting other energies it is stimulated with INTO the frequency effect of 15kHz. The same applies if you expose the resin to both a weak 10Hz signal
and a strong 15kHz signal. It will tend to ' capture'the act of 10Hz being drowned out by 15kHz, and have that function programmed into it. Doing it that
way, you are getting a sympathetic effect towards 15kHz.
But suppose you flip it around the other way. Suppose you expose the resin to a 15kHz signal, and at the same time give it a clear mental impression
that you want to dampen out and get rid of 15kHz. If you do it that way, you will get a counteractive effect, in proportion to the clarity of the mental
impression you give the resin. It will tend to respond well to 15kHz, but instead of amplifying 15kHz, it will dampen it out, and convert 15kHz into other
energy 'colors'or frequencies. The same applies if you were to expose the orgonite to a strong 10Hz signal and a weak 15kHz signal. It would then
capture the act of 15kHz being drowned out by 10Hz, and have that function as a ' program'.
In reality, the way that different frequencies interact with each other has arguably a bigger effect that the volume of each signal. There are frequencies
that are harmonic to 15kHz, and they tend to boost it. There are frequencies that are discordant to 15kHz, and they tend to dampen it. So, both the
relative strength of each signal and the effects of signals on each other produce an effect.
By default, orgonite seems to produce a sympathetic effect to that which excites it during curing. In other words, if you want to get a counteractive effect,
you have to 'tell'it you want a counteractive effect. This, doubtless, is why some towerbusters have a greater effect than others. Many people are
programming the orgonite with a counteractive effect to the tower' s signals, whether or not they are consciously aware of it. Many other people are not,
and so the orgonite is running at varying degrees of efficiency. Rather than criticizing, it is my hope that this will help people all around to improve their
orgonite manufacture.
People who are already doing reiki, visualization, or other traditional metaphysical disciplines will find that whatever energy they put into the mixture will,
to some degree at least, become a permanent part of the finished orgonite' s energy signature. This applies, of course, whether or not a person is
consciously using metaphysical discipline of some variety. Even if a person is not consciously directing energy into the orgonite while it cures, their
thoughts and emotions, the state of their mind, the things they are thinking about while working with the materials... these all have some effect on the
finished product. It appears to me (so far) that consciously directing your energy into the orgonite often produces a greater change in the finished
product than not. The exception to this would be states of great emotional intensity. If you are in a state of emotional excitement, then a part of that
emotional energy will be picked up and integrated into the orgonite.
So, if you are a person who uses prayers, affirmations, declarations, visualization, intent or the like, then you can program your orgonite with these
techniques. One thing to bear in mind if using minerals other than quartz crystals is the kinds of jobs that various minerals are suited to doing. For
example, if you are making orgonite and programming it to get rid of toxins in the body, then you could make that process either more efficient or less
efficient, depending on what minerals you include. If you include minerals that have the effect of stimulating the body to release toxins, then the mineral
and the program are harmonic. If you use a mineral that stimulates the body to absorb energy but program the orgonite with a purgative effect, then the
result will generally be a bit less effective. In short, the orgone output spectrum of the finished orgonite is defined by a COMBINATION of the ingredients
and the programming, so it pays to give a little thought to how you put those 2 factors together.
17
So what if you are making orgonite and you inadvertently put a bunch of nasty thoughts / emotions into it? Well, they WILL affect it somewhat, but not
enough to reduce its effectiveness beyond the 30% line, in my experience. They will make it work less well, but not stop it from working entirely imo. One
thing i have discovered is that say, for example, you think ' issue X is horrible'
. well, you don'
t want the orgonite to enhance the horrible nature of issue X,
obviously. But once you have thought that thought, it is difficult if not impossible to take it back. So give the orgonite a counteractive program with
respect to issue X. Immediately think another thought, namely, that you wish to direct the healing / clearing properties of the orgonite toward issue X,
and work on the problem. This produces orgonite that works specifically (counteractively) on issue X. Not a bad recovery from a little slip of the mind.
Practitioners of radionics will likely be familiar with this concept, point being the concept is of course transferable to orgonite manufacture.
Another example. Some time ago i made some orgonite TBs which had a few flies fall into the resin while it was curing. I didn' t think it that important,
though maybe i felt a little sorry for the flies. The orgonite came out with a sympathetic effect towards houseflies. It was amazing to watch how they just
couldn' t leave it alone. They would be buzzing around the light bulb, and kept stopping and landing on the TBs, which i must admit i found rather
annoying. But at the same time, others have reported success using TBs to get rid of problematic insect infestations, by including a sample of the insect
in the orgonite. Whether they knew it or not, and i must assume they did, they included the intent that they wanted a counteractive effect. And they saw
that the insect infestation was reduced. The difference between my TBs attracting the insects cast inside them, and their TBs repelling the insects cast
inside them was simply the difference between a counteractive effect and a sympathetic effect. Again, those familiar with metaphysics will probably find
this familiar territory.
Bearing that in mind, i am sure you will understand why programming the resin with the intent that you want to counteract the inimical health effects of
the HAARP and GWEN towers is worthwhile. Also perhaps this sheds some light on why there exists such variance in the observable effects of TBs.
Without the intent to get a counteractive effect (since if you live in area with towers the resin is exposed to the signal from the towers while it cures) you
will get the cleansing effect in the 30% range. But if you add the simple thought that you want the orgonite to have a counteractive effect, you will get
much more efficiency, up to several hundred percent improvement.
Rather than going into detail about how to do visualization or focus your intent, i will just say that your emotions are a big part of it. For example, if you
are making orgonite to help your sore back, then you want to make sure that the orgonite is programmed by imagining a healthy back, free from pain. Or
perhaps imagining a sore back turning into a comfortable, pain-free back. You do not want to program the orgonite with you wondering if it will work.
That saps efficiency. So if you have doubts, well that just means you are human. We can not always instantly finish up with our doubts or uncertainty.
But we can put them out of our minds for a few minutes. And in those few minutes when we have put our doubts out of our mind and have stopped
thinking about them, that is the time to do your intent or programming or visualization. For posterity, the same thing applies with prayers, affirmations,
declarations, etc., with or without orgonite.
Ideally, you want to charge the orgonite for the duration of time it takes to cure. This may or may not be possible. I have found so far that with the mental
impressions, it is best to do it at least 3 times. Since polyester resin actually continues to cure for a long time after it has solidified, you generally have
about a 3 day window of opportunity to charge the resin, though the initial period when it is solidifying appears to be the most critical. Once the plastic
has cured, you cannot reprogram the resin, but you can reprogram the crystals embedded within it. You can also direct the energy that the orgonite is
producing to a given task with your intent. Directing the output from the orgonite is different than charging the resin. Using your orgonite' s energy output
is giving the output a job to do. Charging the resin while it cures is defining what the output will be.
When using a machine to program the orgonite, depending on how strong the machine is, a ten to 15 minute period of exposure is often enough to
produce an effect, but where possible i often give it up to 72 hours of exposure.
If you have a radionics machine, succor punch, pulser, wand, or some other kind of intent amplifier / orgone generator, you can use that to either charge
the orgonite or enhance the mental impression (intent) that you give the orgonite. You can also set your favorite xtal (if you work with xtals) near it while
it cures and use that to charge the resin. Varying methods of charging give varying degrees of success. Any kind of attention to the charging process will
produce a more effect than none, i find.
One way you can charge the resin is to devise some means of connecting a quartz crystal wrapped with a mobius coil to the output of your pc sound
card. I have a bit of info about one such device on the ring generator page (http://www.littlemountainsmudge.com/ringgenerator.htm ). Even a smaller
device such as a succor punch, connected to the output of a pc sound card, provides a very versatile apparatus for charging orgonite. If you are unable
to set up something like that, then even using a tone generator and exposing the orgonite to the sound produced will charge the resin. I am amazed at
orgonite's ability to accept a program and repeat it almost indefinitely.
Roberto Forcen, at his site Voicesync (http://www.voicesync.org/ ), has some very impressive sound analysis and sound generation software. One of his
programs that i have worked with a fair amount is called mineral sounds. In his own words, it ' Generates resonant three octave compound tones from a
list of more than 3000 minerals. Tones are generated using powder X-ray Diffraction parameters.'What i can say is that when i fist started playing with it,
i was very impressed. When i run the sounds from this program through my big mobius-driven orgone generators, the energy produced is very similar in
'feel'and in 'color'to the energy from the minerals themselves. Aside from using it to program orgonite with the effects of a mineral i would like to have,
but don' t have on hand (not quite the same as having the actual mineral in the orgonite but close if you let it run several hours), i use it to compliment the
ingredients of the orgonite. For example, if the orgonite contains steel, copper and quartz, i will open multiple copies of this program and charge the
orgonite with the sounds of iron, copper, quartz, and gold. This gives the orgonite a lot more power when it is finished.
Sunlight is another wonderful thing to expose the resin to while it cures, and so is moonlight. These two methods of charging the orgonite are already in
widespread use. Especially with exposing the resin to sunlight, you will often notice a difference in the visible color of the resin when it has cured,
indication that you are in fact doing something and this is not all hocus pocus... ;)
Astrology also has a certain amount of influence on the orgonite, though not one with which i often work. Using a large orgone generator to charge it can
drown out some of the astrological effects, it would appear. One batch i did during the harmonic concordance came out very nice, and it appears to have
captured some of the intense catalytic energy of the harmonic concordance.
18
Another way you can do it is to pour the orgonite outdoors, preferably in contact with the earth, in a clean vortex or ley line. This way tends to both
stimulate the vortex or ley line and program the orgonite with a permanent link to the area in which it was poured. Alternately, you can add some dirt or
wood chips from the vortex to the orgonite and pour it elsewhere. I have used this technique to link together a few different medicine wheels in the area.
Possibly, it could be used to create and/or divert energy lines in the earth'
s body, leading to or from the vortex.
While i was proofreading this article, i phoned my friend of several years Chris Gozdzik from diviningmind.com (http://www.diviningmind.com/ ), and
asked him if he thought i had left out anything glaringly obvious. He reminded me about linking, which is another way that you can do several things with
orgonite, including charging it while it cures. Basically, if you link the orgonite to the energy from an existing large source of energy, either by a sample of
the source or clear visualization, then the orgonite will not only pick up the energy from the existing source as a program, but will also have a permanent
link to the energy source. Thanks, Chris :)
And 2 final notes- If you are building a ring generator, power radionics machine, or other large power-driven orgone generator, first decide what
frequencies you plan to use to drive it with. At least pick out a few of the ones you plan to use a lot. Then, charge the orgonite for the generator with the
frequencies it will be running at. This increases power in the finished generator. Example, the pulsers run at 5075Hz and 32kHz, so whatever other
programming i give them during curing, i give them a good zap of these two frequencies also.
Many of us have noted that orgonite, once cast, sometimes takes a certain amount of time '
start working'
. Charging during curing dramatically reduces
the amount of time that it takes a device to '
start working'
.
Well, that about takes up the time i have today, but here are a few of my favorite hertzian frequencies for charging orgonite, and some the effects i have
observed with them.
741Hz (sine wave) - This is one of the solfeggio tones, and is quite potent imo. When i first started using it i immediately felt a buildup of energy and
subsequent release in the solar plexus and heart chakras. It may be a bit intense for some people at first, but they should rapidly acclimatize. It appears
to have the effect it is reported to by others, that of assisting with finding the solution to a problem. I use it a fair amount these days, and thanks to
whomever it was that posted about it on the yahoo cloudbusters (http://groups.yahoo.com/group/cloudbusters/ ) forum some time ago.
528Hz (sine wave) - This is another one of the solfeggio tones, and it has proven useful for me in manifestation.
5075Hz (square wave) - A frequency i chose myself for use in the driver circuits of the pulsers. It tends to have a grounding, stabilizing effect. I use it as
a multipurpose frequency to drive generators, and to help me calm down when i get cranky ;)
32kHz (square wave) - Another frequency i chose for use in the pulsers, tends to have the opposite effect than 5075Hz, but meshes well with 5075Hz. I
use it for removing blockages in body work, for shielding from energy attacks, and for an aid in the mental '
reach upwards'involved in meditation and
remote viewing. When set to a frequency higher than 20 kHz, NCH toner produces a lower harmonic of target frequency. Since square waves especially
produce many harmonics ranging up and down the scale, imo you are still getting this frequency (or one close to it) as a harmonic when you use a pc
sound card connected to a coil and xtal.
15Hz (square wave) - The frequency many people use to drive their succor punches ( http://www.educate-yourself.org/ ). It tends to have a solid,
relatively stable effect. Of the low frequencies, it is one commonly used today. It is potent, though imo benefits from the company of a higher frequency.
Useful for shielding from energy attacks. Also, if you have a 15Hz driven SP, then charging your orgonite with 15Hz will increase the responsiveness of
your orgonite to your SP.
32Hz/31.7Hz (square or sine wave) - A frequency i first heard of from (i believe) Bruce Stenulson (http://www.stenulson.net/energy/doras.htm ). It has
proven very useful as an aid in programming quartz crystals. Because of it' s tendency to carry programming information / intent from the user to a quartz
crystal, it is useful imo for intent amplification, and as a general purpose frequency for driving mobius-powered orgone generators.
68.635kHz (square or sine wave) - This one of the Hodowanec frequencies. Now, since the upper end of the sound card is well below this frequency, i
am not actually getting this frequency when i put it into the NCH toner (http://www.nch.com.au/tonegen/ ) program that i use as a signal generator. When
set to a frequency higher than 20 kHz, NCH toner produces a lower harmonic of target frequency. Since square waves especially produce many
harmonics ranging up and down the scale, imo you are still getting this frequency (or one close to it) as a harmonic. When run through the nch toner,
and a mobius/quartz driven orgone generator, it produces an emission of orgone that is almost all in the violet range. Violet orgone is both soothing and
cleansing, good for soul-searching as well as healing.
19
EHD Orgonite – Another step
As mentioned earlier, one can produce MHD or MD orgonite either by allowing the particle size to determine density (as in using larger, curly metal
shavings, such as one would find in the average TB) or by adding the organic to the mixture in a particulate form. In fact, when making HD or higher
densities, you basically have to add the organic in a particle form, along with the metal, since there is not enough space between the metal particles
(when they are really small) to produce a ratio close to 50/50 between the metal and organic ingredients. Some time ago I began going a step further
and using metal (fine and superfine particles) that would ordinarily produce HD and adding enough organic to bring the density of the orgone matrix
material down to MHD or MD. The material produced this way has some very interesting differences from the standard TB / HHG mixture of curly
shavings and polyester resin.
It appears that the matrix thus derived has a lot more capacity to store orgone than regular MHD. A given mass of EHD (Expanded High Density) orgone
matrix material will have a slower rate at which the orgone flows through it than the same mass of regular MHD, and it will have a higher overall orgone
field strength than the same mass of regular MHD, even though the density and the resistance afforded to the orgone as it flows through is about the
same. I attribute the slower flow rate of EHD not to a difference in resistance from MHD, but to the fact that adding the organic element in both liquid and
particle form increases the overall energy storage capacity of the matrix somehow. This effect is observed much more when superfine metal particles
are used along with fine metal and organic particles, as opposed to using fine metal and organic particles alone.
After experimenting with several different organic particles, I have settled on flour as preferred material for the time being. One could use wheat flour,
wood flour or other finely powdered absorbent organic substance. The particles should be absorbent enough that they combine with the polyester resin
to produce a thick liquid the consistence of stiff pancake batter. The organic powder is mixed into the resin along with catalyst initially. The metal is
added last, beginning with the superfine particles and finishing with the fine particles. For a readily available source of superfine metal particles, I
suggest cheap metal spray paint. Just add extra catalyst and spray the paint directly on the surface of your resin in the mixing container. Another source
of superfine metal particles are the bronzing powders and other metal powders sold by crafts stores for plating.
I have noticed that especially when the organic material is a fibrous material, the orgone matrix material both takes much longer to absorb a charge
during curing, and absorbs much more of a charge than regular MHD. It absorbs a program, intent or energy signature with much higher fidelity than
regular MHD. It also takes longer to accumulate enough energy to begin working. Regular MHD that I make is usually finished the curing process and
has ‘come online’ by about 3 days after casting. EHD seems to take until about 5 to 7 days after casting to be finished the curing process and ‘powered
up’.
EHD is also efficient for use in power driven orgone generating devices such as powerwands and ring generators and pulsers. It also affords the
cleaning action of converting unhealthy orgone to healthy orgone, but the charging and curing process is much more determinative of the end result, in
terms of cleaning capacity, than with MHD. In General, since it takes so long to store a charge and stores such a high potential of orgone, the energy it is
subjected to while curing are much more an influence on the finished product than with regular MHD. I would not recommend making EHD orgonite
without working in a clean energy environment. Provided you can supply a clean environment or preferably a clean and charged environment in
bioenergy terms, EHD will produce TBS that have a higher output that regular TBs and are more ‘ergonomic’, they feel a bit more alive in the hand. If
you make TBs from EHD but do not have a clean energy environment to cast them in, then you will get TBs that are not very efficient at doing anything
until you pick them up and play with them, at which point you will still likely be able to feel a strong surge of energy when you hold them in your hand.
For personal orgone devices meant to be held in the hands or carried in a pocket, I now prefer EHD to the other recipes I formerly used.
EHD lends itself not so well to making conventional towerbusters which are designed to be high flow filter cleaners. It lends itself very well to making
power driven generators or to making TBs and HHGs for indoor use and human contact. It is like taking a snapshot of an energy field (the field in which it
cures), and then it will sit there and broadcast an image of that energy field, continuously and with respectable intensity. It will covert other forms of
energy into the energy signature (that snapshot) that it has as it’s output. So, if you can handle the programming and charging end of it, it will turn out
much more potent per cubic inch than regular MHD. Instead of producing devices which are simple filter/cleaner devices, making TBs with EHD produce
SELECTIVE filter devices, in that they selectively convert orgone into the orgone signature they have as their output. That’s why the charging / curing
process is so much more critical with EHD.
Though it produces an orgone energy field of higher intensity that MHD, EHD has an output that is much less chaotic than MHD, and the chaotic energy
fields are much more contained within the physical matrix than with regular MHD. With regular MHD, the wave fronts of orgone energy collide within the
device as they are reflected by curved surfaces which are relatively close together. The waves of orgone energy inside EHD orgone matrix material react
less directly with each other, especially the waves reflected by the more widely spaced fine particles. It’s like instead of the waves smacking into each
other up close, the matrix has to build enough pressure until the energy ARCS across between the more widely spaced fine particles. All the while, the
superfine particles afford the waves the opportunity for up-close collisions but to a lesser degree, providing a stable basis for the matrix, if that makes
any sense to you. For this reason, EHD made without superfine and fine particles will not work very well at all.
The mixture should be thick enough that the fine metal particles (say between .5 and 2 mm dia.) are fully suspended in the resin and do not settle out at
all. The mixture should be just thin enough that it smoothes itself off at the surface when vibrated, but it should be thick enough that you have to vibrate it
to get it to smooth over on the surface. You should be able to count 20 to 50 of the suspended fine metal particles in a square inch of surface area.
There should be enough of the superfine metal particles that when wet, the mixture appears to be slight shiny and metallic. When the mixture cures, the
surface will become dusty and opaque but a bit of sanding and a clear coat takes care of that. The mixture also takes longer to chemically cure than
regular MHD, especially if copper or iron is the superfine metal. Extra time should be allowed for curing. EHD to be exposed to the elements should be
protected with a clear coat of spray lacquer or poly resin.
So, in short, as long as it is programmed by a competent energy worker, it works really good for TBs and HHGs designed for human contact as
opposed to agricultural and other nature gifting or tower busting. It also works pretty well for generators which will be excited in some active way while in
use. And, it absorbs a charge of higher potential and with higher fidelity during the curing process.
20
If you have access to the internet, you can check for the latest edition of this document at www.littlemountainsmudge.com in the info section of the site.
Legal notice:
Introduction to OrgoniteTM copyright 2003 Jon Logan

Introduction to OrgoniteTM second edition copyright 2004 Jon Logan
“Introduction to OrgoniteTM” and/or Introduction to ErgoniteTM” are compilations of articles written by Jon Logan, concerning Orgone Matrix Material, it’s
manufacture and application. These compilations will be released in updated form as time progresses.
Orgonite TM is a trademark belonging to Karl Welz, the inventor of orgonite, and is used on littlemountainsmudge.com and in this document for
educational purposes
Wizzer' s Workshop TM, Ergonite TM, Welzite TM, Wood Sprite TM, Water Baby TM, Chocolate Shine TM, O-Matrix Material TM and all text / images on
littlemountainsmudge.com, unless clearly otherwise stated, are copyright 2003 Jon Logan, all rights reserved.
Limited authorization to reproduce: This material may be reproduced or reprinted freely, in whole or in part, in printed paper or digital format for
educational purposes. Additionally, the trademarks Ergonite TM and Welzite TM may be used freely by anyone for private or commercial purposes, so long
as they are specifically used to refer to Orgone Matrix Material, a mixture of metal particles suspended in organic resin.
Owner of copyright for text and images on littlemountainsmudge.com and trademarks used on littlemountainsmudge.com reserves the right to refuse,
suspend or revoke limited authorization to reproduce this material if the material is reproduced inaccurately, or if is sold at a cost in excess of it'
s
production without prior written consent from the owner, or if printed material from this site is used commercially without stating in the printed copy that
the material is copyright 2003 Jon Logan.
TM
In reference to “Introduction to Orgonite second edition, this document may be reproduced freely by anyone for
private or commercial purposes without prior written consent so long as the following conditions are met:
- The document must be reproduced in it’s entirety and not altered in any way.
- You may not charge a fee for distributing or reproducing this document in digital format.
- You may charge a fee for distributing hard copies of this document, of not more than 20 Dollars CDN or 17
Dollars US, whichever is greater.
Email – wizzer@littlemountainsmudge.com
Phone – 250-446-2032
Mail – PO Box 139, Westbridge BC V0H2B0
Url – www.littlemountainsmudge.com
Introduction to Orgonite second edition 2004 Jon Logan
21

Intro To Orgonite

Uploaded by

Copyright:

Available Formats

Intro To Orgonite

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Intro To Orgonite

Uploaded by

Copyright:

Available Formats

An Introduction to OrgoniteTM

second edition copyright 2004 Jon Logan

LD - Low Density Orgonite

MD - Medium Density orgonite

HD - High Density orgonite

XHD - Extra High Density orgonite

Different materials for making orgonite

Cheap orgonite from waste paint

paramagnetic earth with high iron content

rust (iron oxide)

white polyester pigment (titanium oxide)

decomposed chalcopyrite (oxidized copper and iron and sulphur)

decomposed iron pyrite (oxidized iron and sulphur)

Minerals for orgonite:

Mineral Coloration Primary Secondary Effect

Focuses and directs energy within the orgonite. Holds a program.

Enhances overall function of the orgonite. Increases the output and

Provides some coloration. Useful for healing. Useful for cleansing

Enhances overall function of the orgonite. Increases the output and

Focuses and directs energy within the orgonite. A workable

Enhances overall function of the orgonite. Increases the output and

Focuses and directs energy within the orgonite. A workable

Focuses and directs energy within the orgonite. A workable

Enhances overall function of the orgonite. Increases the output and

Focuses and directs energy within the orgonite. A workable

Enhances overall function of the orgonite. Increases the output and

Focuses and directs energy within the orgonite. A workable

Strongly increases orgonite' s mean output. Provides some grounding

Imparts a lovely smooth 'creamy'feel to the energy hahaha. Useful

Focuses and directs energy within the orgonite. A slightly Better

Enhances overall function of the orgonite. Increases the output and

Provides coloration into the green range. Gentle and soothing

Increases orgonite' s capacity to drain away harmful energy by

Increases orgonite' s capacity to drain away harmful energy by

Metal Coloration Primary Secondary Effect

High frequencies. Healing, and lifting of mind upwards. Head in the

Very wide response range of frequencies. Boosts flow of orgone

Provides strong coloration into the blue range. Increases orgonite'

Similar to brass but a bit lower on the scale. Increases orgonite'

Similar to copper but a second to copper in terms of the feel of the

Very high frequencies, and relatively sharp energy. Good for

Provides stability to the energy signature of the orgonite. A relatively

Provides stability to the energy signature of the orgonite. A very low

Strongly increases orgonite's response to magnetic stimulation.

Very low response range. Provides some stability to energy signature

Increases synergy between magnetic and non magnetic metals.

Provides some grounding and some uplifting action to the energy

Organics for orgonite:

Organic Primary Secondary Comments

Honey Adds a soft, high frequency overtone to the orgonite.

Carbon Adds a strong grounding influence to the orgonite.

Mix the blue paint crumbs and the metal

Use turquoise or blue glass as the

Charge with the sound of running water

Resin To fill molds

Introduction to OrgoniteTM copyright 2003 Jon Logan

You might also like