IQAN Catalog HY33-1825 Us

Electronic Control Systems
IQAN® System Products

Catalog HY33-1825/US
North American Product Offering
Catalog HY33-1825/US Electronic Control Systems
IQAN System Products
WARNING - USER RESPONSIBILITY

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
• This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investi-
gation by users having technical expertise.
• The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance,
endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry
standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or autho-
rized distributors.
• To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the
user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or
systems.
OFFER OF SALE
The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are
governed by the provisions stated in the detailed “Offer of Sale” elsewhere in this document or available at www.parker.com.
SAFETY
For safety information, see Safety Guide at www.parker.com/safety or call 1-800-CParker.
II Parker Hannifin Corporation

Electronic Controls Division
Elk Grove Village, IL 60007 USA
Catalog HY33-1825/US Electronic Control Systems
Contents IQAN System Products
Software
IQAN Studios...................................................................................................................... 1
Master displays
IQAN-MD4........................................................................................................................... 3
IQAN-MD3........................................................................................................................... 4
Master controllers
IQAN-MC41......................................................................................................................... 5
IQAN-MC42......................................................................................................................... 6
IQAN-MC43......................................................................................................................... 7
IQAN-MC3........................................................................................................................... 8
IQAN-MC2........................................................................................................................... 9
Expansion units
IQAN-XC10....................................................................................................................... 10
IQAN-XA2......................................................................................................................... 11
IQAN-XS2......................................................................................................................... 12
IQAN-XC21....................................................................................................................... 13
IQAN-XC22/XC23............................................................................................................. 14
IQAN-XT2.......................................................................................................................... 15
IQAN-LC5-C01/C02.......................................................................................................... 16
MP handle for IQAN-LC5-C0x........................................................................................... 17
Accessories
IQAN communication and prototyping cables................................................................... 18
IQAN connector kits.......................................................................................................... 18
IQAN address tags............................................................................................................ 19
IQAN-LF1 footpedal.......................................................................................................... 19
IQAN-G11 diagnostic gateway.......................................................................................... 19
IQAN-SV camera.............................................................................................................. 19
Terms of sale with Warranty Limitations
Offer of sale....................................................................................................................... 20
III Parker Hannifin Corporation

Catalog HY33-1825/US IQANdesign software
IQAN Studios IQAN System Products
Application
The IQAN software studios cover all phases of a
machine’s life cycle, from development through
production to after sales. There are three different
studios available; IQAN Creative Studio, IQAN
Productive Studio and IQAN Active Studio.
IQAN Creative studio

IQAN Creative studio is a user-programmable software
package for the R&D department. It includes tools for
application development, simulation and initial setup.
• IQANdesign
• IQANsimulate
• IQANrun
• IQANanalyze
Contents
IQAN Productive studio
When ordering IQAN Studios, the following items
IQAN Productive studio is a software package for the
are included:
manufacturing and service departments. It includes
• IQAN Studio software (download from website) development tools for customization and automation
of production and maintenance processes.
• 1 licence
• IQANscript
The user’s manuals for IQAN software is provided
in electronic format and is copied to your PC during • IQANcustomize
installation. For a printed manual, contact Parker
• IQANsimulate
Catalog Services.
• IQANrun
Communication cables are not included. Order the
cables you need from the accessories section.
IQAN Active studio
Requirements IQAN Active studio is a software package for service
and production personnel. It includes tools for machine
CPU PC compatible, Pentium® II 233 MHz
diagnostics, setup and simulation.
or better
• IQANrun
RAM minimum 256 Mbyte
(512 Mbyte recommended) • IQANsimulate
HD 100 Mbyte storage space available IQAN Studios are used with the newest IQAN products
including the IQAN-MD3 and IQAN-MD4 master/
Ports serial port, RS232 or USB port
display units and also with the IQAN-MC2, IQAN-MC3
Display XVGA and IQAN-MC4x controllers.
(1280x1024 recommended)
Description
Software Windows® 7, 8, 10 IQAN Creative Studio
IQAN Productive Studio
IQAN Active Studio
Upgrade
It is always possible to download the latest version
from our web site www.iqan.com. Order on-line at iqan.se/store
1 Parker Hannifin Corporation

Catalog HY33-1825/US Master displays
IQAN-MD4 IQAN System Products
Application
The IQAN-MD4 is a family of master display units, fully
compliant with the IQANdesign platform system. The
units have full graphical, diagnostic and CAN gateway
capability and are used together with the easy to use
IQAN programing tools.
IQAN-MD4-7 is offered with a 7’’ (18 cm) display with
touch screen, IQAN-MD4-10 has a 10.4" (26 cm)
display ith touch screen and the IQAN-MD4-5 has a
5.7’’ (14 cm) display with optional touchscreen. The
General IQAN-MD4 has a rugged mechanical design and is
Weight (MD4-7) 0.93 kg
Weight (MD4-5) 0.67 kg completely sealed. The use of optical bonded display
Weight (MD4-10) 1.5 kg glass improves the readability, avoids light refraction
Operating temperature -30 °C to 70 °C and also eliminates possible condensation.
Storage temperature -40 °C to 85 °C
Protection IP65 The display units have a pleasing, aesthetic design
Voltage supply 9-32 Vdc that blends with modern cabins. A touchscreen
Current consumption (idle) 300 mA (28Vdc) interface is offered for interactive, intuitive HMI (code
600 mA(14Vdc) T1). The IQAN-MD4 also has IP-camera support (code
CE marking 2004/108/EC E2). There is no need for separate camera monitors.
Performance
Mounting is easy, with steel clips for a well integrated,
Processor ARM Cortex-A8, (800 MHz)
Memory 2 Gbyte Flash, flush mount in cabin panels, or the back of the unit
256 Mbyte SDRAM has an optional stand-alone bracket compatible
Logging 64 Mb with RAM™ mount components. The MD4 may be
Cycle time 10 to 100 ms mounted in landscape or portrait orientation for easy
Software tools IQANdesign platform integration of HMI or mechanics.
Communication interface
CAN (ISO 11898) 4 (2)2 Description Ordering PN
Protocols ICP, SAE J1939, generic IQAN-MD4-7-T1E2 20077771
Ethernet 100Base-Tx 2 (1)1, 2 IQAN-MD4-5-T0E1 20077772
Display IQAN-MD4-5-T1E2 20077773
Touch Interface PCAP2
7’’ (18 cm) display 16:9, 800x480 pixels IQAN-MD4-10-T1E2 20077774
5.7’’ (14 cm) display 4:3, 640x480 pixels
10.1” (26 cm) display 4:3, 800x600 pixels
Connection
Electrical connection 2x Deutsch DTM, 12 pos
194/(164)
Ethernet 2 x M12, D-code, 4 pos
Outputs
Digital outputs 43
Type Low side
Max load, 1 output 300 mA
Max load, all outputs 850 mA
Inputs
Voltage inputs 23
Signal range 0 - 5 Vdc, 12 bit
Digital inputs 103
Encoder input 13
Signal range 0 - 500 Hz, 50/50 signal 133
1) Ethernet port A dedicated for PC diagnostics.
2) Depending on configuration.
3) The outputs and inputs share the same physical pins. The user
defines the channels/pins with IQANdesign.
MD4-7/(MD4-5) CO
NN
units=mm EC
TO
R
48
5.5

Catalog HY33-1825/US Master displays
IQAN-MD3 IQAN System Products
Application
The IQAN-MD3 is a master/display unit that works
with a variety of expansion modules in the IQANdesign
platform. The MD3 is fully programmable for use in any
machine application, as a graphical user interface and
as a CAN gateway. The IQAN-MD3 is constructed to
be weatherproof for outdoor use. The MD3 will display
vehicle data and system information.
The IQAN-MD3 has a 3.5” transflective TFT color
display. There are five navigation buttons and four
’soft’ function buttons to make interaction with the
control simple for the operator. The unit is designed to
be easily mounted in a vehicle dashboard or exterior
General control panel. The unit has two sealed and keyed
Weight 0.3 Kg Deutsch DTM 12 position connectors.
Operating temperature -30 to +60 °C
-25>LCD off >+75 °C The MD3 has a large internal memory for events and
Protection outdoor use logging that is capable of storing 80,000 records. The
Voltage supply 11- 32 Vdc analog inputs accept 0-5V signals from input devices
Current consumption (idle) 130 mA (28 Vdc) or sensors. These inputs can also be set up as on-off
190 mA (14 Vdc)
inputs. A digital output is available and may be used
Performance for alarm or alert signals.
Processor 32-bit (144 MHz)
Logging 80K records The MD3 is connected to other units by 3 CAN busses.
Sample time min 10ms All CAN busses may be configured as ICP (IQAN
Software tools IQANdesign family CAN Protocol), SAE J1939 or Generic CAN. The unit
Communication interfaces supports CAN connection and USB for communication
CAN (ISO 11898) 2 with a PC.
Protocols ICP, SAE J1939,
CANopen, etc Description Ordering PN
RS-232 1 IQAN-MD3-M15 200777933
Protocols AT-Hayes,GSM07.07,
GSM07.05, IDP Phased-out part number
USB 2.0 (full speed)1 1 IQAN-MD3 200724094
Outputs
3) This p/n is used after June 1, 2015 and requires software
Digital output 1 versions 2.63 and 3.17 or higher.
Type high side switch 4) This p/n was used before June 1, 2015.
Max load 200 mA
Inputs
137
Voltage inputs 7
Signal range 0 - 5 Vdc
Resolution 1.2 mV
Digital inputs (7)2
Signal high 4 Vdc
Signal low 1 Vdc
1) The USB driver circuit and LCD were updated on June 1, 2015
2) The voltage and digital inputs share the same physical pins. The
user defines the channels/pins with IQANdesign.
116
23
CO
NN
E CT
47
units=mm OR
S

Catalog HY33-1825/US Master controllers
IQAN-MC41 IQAN System Products
Application
The IQAN-MC41 controller is the lowest I/O
count module in the MC4 family. It is best for
smaller applications such as task-oriented control,
implementing single features on a vehicle (e.g. valve
driver for auxiliary hydraulic function).
The IQAN-MC41 is designed to be either an IEC
61508 SIL2 Functional Safety (-FS) variant, or a
performance optimized, standard controller.
The 3 core CPU architecture of the IQAN-MC41
General provides computational power that allows it to perform
Weight 0.5 kg
high speed (ex. 1 ms) control loops for time critical
Temperature range -40 to +85 °C
Protection outdoor, chassis functions. Lockstep CPU and hardware redundancy
Voltage supply 9 - 32 Vdc offers very high real-time performance in safety critical
Current consumption (idle) 180 mA (24V) applications.
250 mA (12V)
There are Voltage inputs in 2 different scales,
Communication interfaces
Current loop inputs for 4-20 mA, Timer inputs (used
CAN buses 2
Protocols ICP (IQAN CAN Protocol) for frequency, PWM and pulse devices) and Digital
SAE J1939, Generic CAN (on-off) inputs. Voltage and Timer inputs share pin
Outputs positions with Digital inputs.
Max number of outputs 8 The IQAN-MC41 has 2 double proportional outputs
Proportional outputs for controlling valves. These outputs can control up to
Current output pairs 2
Type current closed loop 2 bi-directional proportional valve sections or 2 single
Signal range 100 - 2500 mA solenoid devices (ex. proportional cartridge valves).
Dither frequency 70 - 1000 Hz The unit also has 4 high-side PWM outputs and 4
Resolution 1 mA
PWM outputs (HS) 4
low-side PWM outputs.
Type high side switch The IQAN-MC41 footprint is small enough for any
Max load 2 A (single) installation. The enclosure is rated IP66 + IP69K and
PWM outputs (LS) 4
is a rugged mechanical design, sealed for outdoor use.
Type low side switch
Max load 2.5 A (single) To meet the environment found in mobile machines the
Inputs MC41 uses a 66 position Molex MX123 high reliability
Max number of inputs 18 connector, made for harsh environment and high
Voltage inputs 10 vibration applications.
Signal range 8 x 0 - 5 Vdc
2 x 0 - 32 Vdc Description Ordering PN
Resolution 12 bit IQAN-MC41 20085111
Current-loop inputs 2
Signal range 0 - 20 mA, 13 bit IQAN-MC41-FS 20085121
Timer inputs:
Frequency, PWM, Pulse 6 M6 screw (4x)
Signal high 4 Vdc - 32 Vdc
Signal low 0 - 1 Vdc
Range 0 - 50,000 Hz
Digital inputs 0 (up to 6)
Connector 42
Type 1 x Molex MX123, 66 pos.

92
5
15
CC73
86.5
units=mm

Application
The IQAN-MC42 controller is an intermediate I/O
count module in the MC4 family. It is best for mid-size
applications such as powertrain control (e.g. power
shift transmissions) or distributing I/O on a vehicle
(physically placed close to functions).
Weight 0.8 kg
Temperature range -40 to +85 °C high speed (ex. 1 ms) control loops for time critical
320 mA (12V)
CAN buses 3
Current loop inputs for 4-20 mA, Timer inputs (used
Ethernet 10 base T positions with Digital inputs.
Outputs The IQAN-MC42 has 6 double proportional outputs
Max number of outputs 16
for controlling valves. These outputs can control up to
Proportional outputs
Current output pairs 6 6 bi-directional proportional valve sections or 6 single
Type current closed loop solenoid devices (ex. proportional cartridge valves).
Signal range 100 - 2500 mA
The unit also has 4 high-side PWM outputs and 12
Dither frequency 70 - 1000 Hz
Resolution 1 mA low-side PWM outputs.
PWM outputs (HS) 4 The IQAN-MC42 footprint is small enough for any
Type high side switch installation. The enclosure is rated IP66 + IP69K and
Max load 2 A (single)
PWM outputs (LS) 12 is a rugged mechanical design, sealed for outdoor use.
Type low side switch To meet the environment found in mobile machines the
Max load 2.5 A (single) MC42 uses a 66 position Molex MX123 high reliability
Inputs connector, made for harsh environment and high
Max number of inputs 18 vibration applications.
Voltage inputs 10
Signal range 8 x 0 - 5 Vdc Description Ordering PN
2 x 0 - 32 Vdc IQAN-MC42 20085112
Resolution 12 bit
Current-loop inputs 2 IQAN-MC42-FS 20085122
Signal range 0 - 20 mA, 13 bit
Timer inputs: M6 screw (4x)
Frequency, PWM, Pulse 6
Range 0 - 50,000 Hz
42
Connector
92
Type 1 x Molex MX123, 66 pos.

15
CC15
3
166
units=mm

Application
The IQAN-MC43 controller is a large I/O count module
in the MC4 family. It is best for bigger applications such
as total vehicle control (all hydraulic functions) when
it is desired to have the controller centrally located to
save valuable space.
Weight 0.8 kg
Temperature range -40 to +85 °C high speed (ex. 1 ms) control loops for time critical
240 mA (12V)
CAN buses 5 Current loop inputs for 4-20 mA, Timer inputs (used
Ethernet 10 base T positions with Digital inputs.
Outputs
The IQAN-MC43 has 10 double proportional outputs
Max number of outputs 36
Proportional outputs for controlling valves. These outputs can control up to
Current output pairs 10 10 bi-directional proportional valve sections or 10 single
Type current closed loop solenoid devices (ex. proportional cartridge valves).
Dither frequency 70 - 1000 Hz The unit also has 8 high-side PWM outputs and 20
Resolution 1 mA low-side PWM outputs.
PWM outputs (HS) 8
The IQAN-MC43 footprint is small enough for any
Type high side switch
Max load 2 A (single) installation. The enclosure is rated IP66 + IP69K and
PWM outputs (LS) 20 is a rugged mechanical design, sealed for outdoor use.
To meet the environment found in mobile machines
Max load 2.5 A (single)
PWM outputs (LS) 8 the MC43 uses 66 position and 73 position Molex
Type low side switch MX123 high reliability connectors, made for harsh
Max load 300 mA environment and high vibration applications.
Inputs Description Ordering PN
Max number of inputs 50
Voltage inputs 28 IQAN-MC43 20085113
Signal range 26 x 0 - 5 Vdc IQAN-MC43-FS 20085123
2 x 0 - 32 Vdc
Resolution 12 bit M6 screw (4x)
Current-loop inputs 4
Signal range 0 - 20 mA, 13 bit
Timer inputs:
Frequency, PWM, Pulse 6
Signal high 4 Vdc - 32 Vdc 42
Range 0 - 50,000 Hz
92

5
15
CC15
Signal low 0 - 1 Vdc 166
3
Connector
Type, C1 1 x Molex MX123, 66 pos. units=mm
Type, C2 1 x Molex MX123, 73 pos.

Application
The IQAN-MC3 is a SIL2 rated master module in the
IQANdesign platform. It can be used as a standalone
controller, as a single bus master, or together with
other IQAN master modules.
All IQAN modules are designed with the functional
safety requirements of mobile machines in mind. The
IQAN-MC3 is especially suited for applications with
higher demands on functional safety, where there is a
need to prove the safety integrity of each implemented
General safety function. It is designed in accordance with IEC
Weight 1.1 kg 61508, and can be used to implement safety functions
Temperature range of up to SIL2. When applying EN ISO 13849-1 for
Operating, ambient -40 to +85 °C safety functions, it can be used as a PLd subsystem.
Storage, ambient -40 to +100 °C
Protection outdoor, chassis All of the 32 inputs on the IQAN-MC3 can be used for
Voltage supply 9 - 32 Vdc safety related signals, when the inputs are configured
Current consumption (idle) 160 mA (24V) in pairs. On the unit there are analog inputs for 0-5 V
240 mA (12V) signals from e.g. hall-effect or potentiometer sensors;
CAN buses 41
digital inputs for e.g. switches; and frequency inputs.
Protocols Parker ICP
(IQAN CAN Protocol) Frequency inputs can be configured to read signals
SAE J1939, Generic CAN from quadrature encoders, or alternatively to be used
1) It is recommended that one CAN bus is dedicated for diagnostic as digital inputs.
purposes (PC interface)
Safety
As a supply for sensors, it has two separately
IEC 61508 Up to SIL2 monitored 5 V reference signals.
EN ISO 13849-1 Up to PLd All of the outputs on the IQAN-MC3 can be used for
PFHd < 10-7
safety related signals. There are four proportional
Outputs current outputs designed to drive proportional
Proportional outputs
hydraulic valves, where each output controls one bi-
Type current closed loop directional valve section. The unit also has five digital
Signal range 100-2000 mA outputs for driving on-off solenoids. Two of these are
Dither frequency 70-333 Hz also intended to function as alarm outputs, for e.g.
Digital outputs LED lamps.
Dedicated digital outputs 5
Type hs+ls switch The enclosure is designed to protect the electronics
Max load 3x3A in a harsh environment on mobile machines. On the
2 x 1.5 A front of the unit, there are four sealed and individually
Inputs keyed Deutsch DT connectors.
Voltage inputs 16 Description Ordering PN
Signal range 0 - 5 Vdc IQAN-MC3 20077717
Frequency inputs 8
Alternative configuration Quadrature in (4)
Digital in (8)
Dedicated digital inputs 8
Connector
Type 4 x DT04-18P(key A-D)
units=mm

Application
The IQAN-MC31 is a master module in the IQANdesign
platform. It can be used as a standalone controller,
as a single bus master, or together with other IQAN
master modules.
The unit is based on the IQAN-MC3 SIL2 rated
controller and uses the same hardware, but with
software optimized for higher speed and lower memory
consumption.
The 32 bit architecture of the IQAN-MC31 provides
General computational capacity that allows it to perform
Weight 1.1 kg
high speed (ex. 3 ms) control loops for time critical
Temperature range
Operating, ambient -40 to +85 °C functions. The unit is equipped with a Real Time Clock
Storage, ambient -40 to +100 °C and can perform data logging functions.
Protection outdoor, chassis
The IQAN-MC31 controller has 16 voltage inputs for
Voltage supply 9 - 32 Vdc
Current consumption (idle) 160 mA (24V) connection of 0-5 Vdc signals and 8 frequency inputs
240 mA (12V) for speed and position sensors.
CE marking 2004/108/EC
The IQAN-MC31 has 4 double proportional outputs
Communication interfaces for controlling valves. These outputs can control up to
CAN buses 4 4 bi-directional proportional valve sections or 4 single
Protocols Parker ICP
(IQAN CAN Protocol) solenoid devices (ex. proportional cartridge valves).
SAE J1939, Generic CAN The unit also has 5 dedicated on-off outputs that
Outputs are high-side power outputs and 5 dedicated on-off
Proportional outputs outputs that are low-side outputs.
Type current closed loop A bank of low-side, on-off outputs is typically connected
Signal range 100-2000 mA to one or more of the high-side, on-off outputs and are
Dither frequency 70-333 Hz used for low current functions.
Resolution 1 mA
Digital outputs 5 The enclosure is designed to protect the electronics
Type high side switch in a harsh environment on mobile machines. On the
Max load 3x3A front of the unit, there are four sealed and individually
2 x 1.5 A keyed Deutsch DT connectors. The MC31 is designed
Digital outputs (LS) 5
for mounting outdoor on the chassis.
Max load 3x3A Description Ordering PN
2 x 1.5 A
IQAN-MC31 20077786
Inputs
Voltage inputs
Number 16
Signal range 0 - 5 Vdc
Resolution 1.2 mV
Frequency inputs
Number 8 (0)
Alternative configurations Quadrature in (4)
Digital in (8)
Digital inputs
Number 8
Connector units=mm
Type 4 x DT04-18P(key A-D)

The IQAN-MC2 is a flexible master unit that works with
a variety of expansion modules in the IQANdesign
platform control system. This unit is suitable for use as
either a Bus master or standalone control. The IQAN-
MC2 has new I/O flexibility that allows the user greater
freedom in defining signals for both measurement
and control.
The different input types are voltage, on/off, pulse
and frequency. The outputs are proportional and on/
off. The unit also has two CAN interfaces for bus
communication using IQAN CAN Protocol (ICP) and
SAE J1939 or Generic CAN.
The MC2 is equipped with a Real Time Clock and can
General perform data logging functions.
Weight 0.7 Kg
Temperature range -40 to +70 °C The IQAN-MC2 can control proportional valves using
Protection outdoor use current mode (current closed-loop) or PWM mode
Voltage supply 11- 32 VDC (voltage open-loop) signals. The analog inputs will
Current consumption (idle) 160 mA (28 VDC)
accept 0-5V signals from input devices or sensors. The
200 mA (14 VDC)
Data interface inputs can also be configured for 5 frequency inputs.
Type Parker ICP Some outputs may alternatively be used as voltage
(IQAN CAN Protocol) inputs or digital inputs for switches. For communication
J1939, Generic CAN and diagnostics the MC2 has a USB interface.
Communication port
Type USB 1.11 The aluminum housing is designed to be rugged, but
Outputs light and has a sealed, automotive AMP/Tyco power
Proportional outputs 8 double (max)2 timer connector. The IQAN-MC2 has a membrane to
Type current mode current - closed-loop prevent condensation inside the housing. Additional
PWM mode voltage - open-loop protection allows the unit to be steam-cleaned. This
Signal range 100 - 2000 mA controller is designed for the outdoor environment.
Dither frequency 25 - 333 Hz
Resolution 0.1 mA Description Ordering PN
Digital outputs 24 (max)2 IQAN-MC2-M14 200777873
Total load (all outputs) 16 A
Phased-out part number
Inputs
IQAN-MC2 200708994
Voltage inputs 13 (max)2 3) This p/n is used after January 1, 2015 and requires software
Signal range 0 - 5 VDC versions 2.61 and 3.14 or higher.
Resolution 1.2 mV 4) This p/n was used before January 1, 2015.
Frequency inputs 5 (max)2
Signal range (speed mode) 2 - 20000 Hz
(position mode) 0 - 20000 Hz
Digital inputs 13 (max)2
Signal high 4 VDC - VBAT
Signal low 0 - 1 VDC 60
1) the USB driver circuit was updated on January 1, 2015.

2) The flexible inputs and outputs share the same physical pins. The
user defines the channels/pins with IQANdesign. 32
Application 142
164
67
52
75
units=mm

Catalog HY33-1825/US Expansion units
IQAN-XC10 IQAN System Products
Application
The IQAN-XC10 is an IQANdesign platform expansion
module in the IQAN product group. This unit is
designed to get a high digital I/O count in one module.
All IQAN expansion modules communicate with a
master over a CAN bus, using the IQAN CAN protocol.
The module has a large number of digital inputs for
connection to switches. It also has analog inputs
for connection to 0-5 Vdc sensors from resistive or
Hall-effect sensors and joysticks. The sensors can be
powered from the 5 V reference on the module. For
flexibility, all of the analog voltage inputs can also be
configured as digital inputs.
General
There are two types of frequency inputs, allowing for
Weight 1.2 kg
Temperature range both active sensors, such as Hall effect sensors, and
Operating, ambient -40 to +85 °C for inductive pickup sensors.
Storage, ambient -40 to +85 °C
The module has a large number of digital outputs
Protection IP66
Voltage supply 7.5 - 32 Vdc designed for driving on-off solenoids in a hydraulic
Current consumption (idle) 60 mA (28 VDC) system. The dedicated digital outputs can also be
70 mA (14 VDC) used for driving other types of loads, such as LEDs.
Data interface Parker ICP
(IQAN CAN Protocol) Some of the outputs can also be configured as PWM
outputs, for less demanding proportional functions
Outputs
Digital out high 16 when temperature compensation is not needed. The
Type high-side switch PWM outputs are configured in pairs, where each pair
Max load 2.5 A is intended for one valve section. These outputs are
Max PWM frequency 500 Hz monitored, and use a combination of high-side and
Digital out low 4 low-side switches to make it possible to shut down in
Type low-side switch the event of wiring faults.
Max load 2.5 A
Inputs The IQAN-XC10 is designed for use on mobile
Voltage inputs 10 machinery. It uses two keyed 35-pin Ampseal
Signal range 0 - 5 Vdc connectors. The unit also has two LEDs for aiding
Resolution 5 mV diagnostics when it is not connected to a master
Frequency inputs 4 display.
Signal range 0 - 10000 Hz
Digital inputs 16 Description Ordering PN
Signal high 3.65 Vdc - VBAT IQAN-XC10 20077638ECD
Signal low 0 - 1.56 Vdc
Ø8.2
47 6.2
23
4
12
7 25
14
5
units=mm

IQAN-XA2 IQAN System Products
Application
The IQAN-XA2 is an expansion module in the IQAN
product group and is used with the IQANdesign
platform. This unit is designed for high digital I/O count,
weather resistance, and safety.
master over a CAN bus. The XA2 module has new
I/O flexibility that allows the user greater freedom in
defining signals for measurement and control.
The IQAN-XA2 can control proportional valves using
current mode (current closed-loop) or PWM mode
(voltage open-loop) signals. The analog inputs accept
0-5V signals from input devices or sensors. These
General
inputs can also be set up to accept 4 frequency or
Weight 0.7 Kg
Operating temperature -40 to +70 °C 2 directional frequency (quadrature) inputs. Many
Protection outdoor use outputs may alternatively be used as digital inputs for
Voltage supply 11- 32 VDC switches. The XA2 also has a number of high power
Current consumption (idle) 75 mA (28 VDC) digital (on-off) outputs.
95 mA (14 VDC)
Data interface Parker ICP The aluminum housing is designed to be rugged, but
(IQAN CAN Protocol) light and has a sealed, automotive AMP/Tyco power
Outputs timer connector. The XA2 has a membrane to prevent
Proportional outputs 6 double (max)1 condensation inside the housing. This controller is
Type current mode current - closed-loop designed for the outdoor environment.
PWM mode voltage - open-loop
Signal range 100 - 2000 mA The unit executes a self-test during start up and cyclic
Dither frequency 25 - 333 Hz operation. An internal watch dog checks for software
Resolution 1 mA errors and will interrupt outputs if errors are detected.
Digital outputs 12 (max)1 The IQAN-XA2 is made using selected components
Type high side switch and conforms to strict international requirements.
Total load (all outputs) 20 A
Inputs Diagnostics: If an error is detected an LED on the top
Voltage inputs 8 (max) 1 of the controller flashes a sequence to indicate the
Signal range 0 - 5 VDC nature of the error.
Resolution 5 mV
Frequency inputs 4 (max)1 Description Ordering PN
Signal range (speed mode) 2 - 30000 Hz IQAN-XA2 5010033
Quadrature inputs 2 (max)1
Signal range (speed mode) 2 - 30000 Hz
Signal low 0 - 1 VDC
60
1) The flexible inputs and outputs share the same physical pins. The
32
142
164
67
52
75
units=mm

IQAN-XS2 IQAN System Products
Application
The IQAN-XS2 is an expansion module in the IQAN
product group and is used with the IQANdesign
platform. This unit is designed for high digital I/O count,
weather resistance, and safety.
master over a CAN bus. The XS2 module has a large
number of inputs and outputs that allows the user to
have fewer modules for digital signals.
The IQAN-XS2 can control valves using digital (on-off)
output signals. The analog inputs accept 0-5V signals
from input devices or sensors. These analog inputs
may alternatively be used as high impedance digital
General
inputs for switches. The XS2 also has a number of
Weight 0.7 Kg
Operating temperature -40 to +70 °C dedicated digital (on-off) inputs.
Protection outdoor use The aluminum housing is designed to be rugged, but
Voltage supply 11- 32 VDC
light and has a sealed, automotive AMP/Tyco power
Current consumption (idle) 75 mA (28 VDC)
95 mA (14 VDC) timer connector. The XS2 has a membrane to prevent
Data interface Parker ICP condensation inside the housing. This controller is
(IQAN CAN Protocol) designed for the outdoor environment.
Outputs The unit executes a self-test during start up and cyclic
Digital outputs 12 operation. An internal watch dog checks for software
Total load (all outputs) 20 A errors and will interrupt outputs if errors are detected.
The IQAN-XS2 is made using selected components
Inputs
Voltage inputs 8 (max)1 and conforms to strict international requirements.
Signal range 0 - 5 VDC Diagnostics: If an error is detected an LED on the top
Resolution 5 mV of the controller flashes a sequence to indicate the
nature of the error.
Signal low 0 - 1 VDC Description Ordering PN
1) The flexible inputs and outputs share the same physical pins. The IQAN-XS2 5010017
60
32
142
164
67
52
75
units=mm

IQAN-XC21 IQAN System Products
The IQAN-XC21 is an IQANdesign platform expansion
module in the IQAN product group. This unit is a small
dimension I/O module to be used as an expansion unit
in an IQAN system. It is also useful as an interface with
the IQAN-LC6-X05 joystick to provide CAN capability.
The IQAN-XC21 module has I/O flexibility that allows
the user freedom in defining signals for measurement
and control.
The IQAN-XC21 has up to 20 digital inputs for
connection to switches. Up to 8 of these inputs may
be configured as voltage inputs for connection of 0-5
General Vdc signals from resistive or Hall-effect sensors and
Weight 0.1 kg
Temperature range
joysticks. The sensors can be powered from one of the
Operating, ambient -40 to +70 °C 5 Vdc reference voltages on the module.
Storage, ambient -40 to +100 °C The remaining 12 inputs can be configured as up to 10
Protection IP32
frequency inputs and 1 encoder input for measuring
Current consumption (idle) 20 mA (28 Vdc) speed and position.
30 mA (14 Vdc) The module’s low power digital outputs are designed
for driving low power loads such as relays, LEDs or
(IQAN CAN Protocol) alarm buzzers. The outputs share pins with the inputs
Outputs
and are configured using IQAN software.
Digital out low up to 81 The IQAN-XC21 is designed for in-cab use on mobile
Type low-side switch machinery. It uses four Molex Micro-fit connectors
Max load, 1 output 300 mA
of varying pin density to prevent wiring mix-ups. The
module has addressing in the wiring harness through
Inputs
use of an IDtag; the addressing of the IQAN-XC21
Voltage inputs up to 81
Signal range 0 - 5 Vdc allows up to 8 modules of this type on the bus.
Resolution 1.22 mV The housing is designed for stacking multiple modules,
Frequency inputs up to 101
providing a high density of I/O in a small footprint.
Signal range (FIN-A to B) 1 - 20000 Hz
Signal range (FIN-C to J) 1 - 4000 Hz The module also has pins that allow ‘daisy chaining’
Logic level high >4 Vdc of power and CAN for simplified cable harness
Logic level low <1 Vdc installation.
Encoder inputs up to 11
Signal range 0 - 20000 Hz Description Ordering PN
Logic level high >4 Vdc IQAN-XC21 20077775
Logic level low <1 Vdc
Digital inputs up to 201
Signal high >4 Vdc
Signal low <1 Vdc
Sensor supplies
Voltage references 2
Supply range 5 Vdc ±100 mV
Max load C2 connector 70 mA (has 2 pins)
Max load C3 connector 70 mA (has 1 pin) 18
1) depending on configuration
91
67.2
units=mm

IQAN-XC22/-XC23 IQAN System Products
The IQAN-XC22 and IQAN-XC23 are IQANdesign
platform expansion modules in the IQAN system. This
type of unit is a small dimension I/O module to be
used as an expansion unit in an IQAN control system.
The IQAN-XC22/23 modules have I/O flexibility
that allows the user freedom in defining signals for
measurement and control.
The IQAN-XC22 has up to 12 digital inputs for
connection to switches. These inputs can be configured
as up to 10 frequency inputs and 1 encoder input for
measuring speed and position.
General
Weight 0.2 kg The IQAN-XC23 has up to 20 digital inputs for
Temperature range connection to switches. Up to 8 of these inputs may
Operating, ambient -40 to +70 °C be configured as voltage inputs for connection of 0-5
Storage, ambient -40 to +100 °C Vdc signals from resistive or Hall-effect sensors and
Protection IP65, IP6K9K
joysticks. The remaining 12 inputs can be configured
Current consumption (idle) 20 mA (28 Vdc) as up to 10 frequency inputs and 1 encoder input for
30 mA (14 Vdc) measuring speed and position.
The module’s low power digital outputs are designed
(IQAN CAN Protocol) for driving low power loads such as relays, LEDs or
alarm buzzers. The outputs share pins with the inputs
Outputs
Digital out low up to 81 and are configured using IQAN software.
Type low-side switch The IQAN-XC22/23 is designed for outdoor use on
Max load, 1 output 300 mA mobile machinery. It uses 2 or 3 keyed Deutsch DTM
connectors, depending on model, to prevent wiring
Inputs mix-ups. The module has addressing in the wiring
Voltage inputs up to 81, 2
Signal range 0 - 5 Vdc harness through use of an IDtag; the addressing of
Resolution 1.22 mV the IQAN-XC22/23 allows up to 8 modules of this type
Frequency inputs up to 101 on the bus.
Signal range (FIN-A to B) 1 - 20000 Hz
Signal range (FIN-C to J) 1 - 4000 Hz
The housing is designed for stacking multiple modules,
Logic level high >4 Vdc providing a high density of I/O in a small footprint.
Logic level low <1 Vdc Description Ordering PN
Encoder inputs up to 11
Signal range 0 - 20000 Hz IQAN-XC22 20077784
Logic level high >4 Vdc IQAN-XC23 20077792
Logic level low <1 Vdc
Digital inputs up to 121 (201, 2) 90
Signal high >4 Vdc
Signal low <1 Vdc
1) depending on configuration
2) -XC23 only
86
23
250
units=mm

IQAN-XT2 IQAN System Products
Application
IQAN-XT2 is a legacy unit from the IQANdevelop
platform of IQAN expansion modules that is also
supported in IQANdesign platform systems. Key
features for this type of module are flexibility, weather
resistance and safety.
master over a CAN-BUS. The XT2 has an additional
CAN hub designed to interface with J1939 diesel
engines on mobile machinery and has a dedicated
output for electronic throttle control, E-GAS.
The IQAN-XT2 module has a flexible I/O interface
which gives system designers increased options. The
General
same physical pin can be used for different types of
Weight 0.7 Kg
Operating temperature -40 to +70 °C inputs or outputs. Types of I/O such as E-gas and
Protection outdoor use PWM outputs increase the flexibility of the module.
Voltage supply 9 - 34 VDC Digital outputs now have features such as softstart
Current consumption (idle) 160 mA (28 VDC) and peak & hold. The J1939 CAN hub allows the XT2
140 mA (14 VDC) to communicate directly with an electronic engine
Data interface Parker ICP control bus.
(IQAN CAN Protocol)
Additional CAN hub J1939 or other byte The aluminum housing is designed to be rugged, but
aligned CAN protocol light and has a sealed, automotive AMP/Tyco power
Outputs timer connector. The XT2 has a membrane to prevent
Proportional current outputs condensation inside the housing. This controller is
Number 2 double designed for the outdoor environment.
Dither frequency 25 - 150 Hz The unit executes a self-test during start up and cyclic
Dither amplitude 0 - 500 mA operation. An internal watch dog checks for software
Resolution 0.7 mA errors and will interrupt outputs if errors are detected.
Digital/ PWM (no current feedback) The IQAN-XT2 is made using selected components
Number 6 / 3 double
and conforms to strict international requirements.
Max load 3A Diagnostics: If an error is detected an LED on the top
PWM frequency 25 - 2000 Hz of the controller flashes a sequence to indicate the
E-gas/Servo motor output (PWM H-bridge)
nature of the error.
Number 1
Signal Range 0-100% rated power Description Ordering PN
Max load 2,5A
Total load (all outputs) 20 A IQAN-XT2 5010018
Inputs
Voltage/Frequency
Number 10/3
Signal range 0 - 5 VDC
Resolution 5 mV 60
Frequency range 1-10 000 Hz
32
142
164
67
52
75
units=mm

IQAN-LC5-C01 IQAN System Products
Application
The IQAN-LC5-C01 is a large, coordinate joystick that
incorporates ruggedness, functionality, light weight
with high flexibility for mobile market applications.
The unit is extremely robust, able to withstand
aggressive conditions during outdoor use and in
outdoor installations, including EMI, vibrations and
a wide temperature range. The IQAN-LC5-C01 has
high I/O count and the ability to support up to 5 axes
in IQANdesign platform applications.
Fourth generation IQAN-LL joysticks are easily
replaced with the IQAN-LC5-C02/C03 versions. The
U, N and G handles are offered.
General (Lever base)
The IQAN-LC5 housing has integrated Deutsch
Weight .41 kg
Voltage supply 9 - 32 Vdc transportation connectors. The handle cable may be
Current consumption 45mA @ 14Vdc routed completely through the main, non-corrosive
30mA @ 28Vdc housing. This makes field mounting of new handles or
CAN (ISO 11898) CAN 2.0b replacing a bellow very easy to accomplish.
Protocol ICP (IQAN Protocol)
All proportional inputs are of contactless Hall effect
Mechanical (Lever base)
Angle of movement ±18° type with dual sensors to provide redundancy for
Expected life high safety and reliability. This makes it easy for the
(full stroke cycles) 5 million application designer to meet high safety requirements
Lever force in neutral, XY 0.6 Nm on functions by using IQAN software.
Full actuated, XY direction 1.4 Nm
One time loading (max.) 100 Nm The IQAN-LC5-C01/C02 CAN levers are connected
Environmental (Lever base) to other modules through a CAN bus.
Temperature range Description Ordering PN
Operating, ambient -40 to +85° C
Storage, ambient -40 to +100° C IQAN-LC5-C01-U1 20076330
Sealing (above flange) IP65 IQAN-LC5-C01-U2 20076331
Connection IQAN-LC5-C01-G 20077750
Electrical connection Deutsch DTM, IQAN-LC5-C02-U1 20076333
2x 6 pos., 1x 12 pos.
IQAN-LC5-C02-U2 20076334
Inputs
Voltage inputs1 8(1) IQAN-LC5-C02-N2 20077690
Signal range 0-5 Vdc IQAN-LC5-C02-N2E1 20077686
Resolution 1.2 mV IQAN-LC5-C02-N2T 20077685
Digital inputs 5
Signal high >4 Vdc
IQAN-LC5-C02-N4 20077688
Signal low <= 1 Vdc IQAN-LC5-C03-G 20077752
1) The voltage inputs share the same physical pins. The user de-
fines the channels/pins with IQAN software. 1) wired to replace LL-E2 handle functionality
Outputs
Digital output 1
Max load 200 mA
105
80
49 Ø91
105
units=mm

-MP handle option for IQAN-LC5-C0x IQAN System Products
Application
The MP handle option provides a variety of control
interfaces in an ergonomic, multi-function handle that
comfortably fits your hand. The handle is a robust
design, able to withstand heavy use in outdoor
installations, including exposure to a wide range of
automotive chemicals. The handle has the capability to
have a maximum of 8 buttons or 2 proportional thumb
wheels in the faceplate. Combinations of buttons,
thumb wheels, and trigger are also possible. The MP
handle will be assembled to the IQAN-LC5 base,
and the cables are routed through the base. The push
buttons and thumb wheel are easily connected to the
joystick base by a Deutsch DTM connector.
General (handle)
Weight .25 kg The MP handle is made to fit either the right or left
Temperature range -40 to +85° C hand, reducing inventory part numbers. The buttons
Sealing outdoor use are large, and have a nice tactile feel. The proportional
Buttons/Trigger thumb wheel has dual sensors providing 2 crossed
Expected life (electrical) 0.5 million outputs that may be compared in IQAN modules for
Expected life (mechanical) 1 million
safe operation.
Travel 1.5 mm
Actuating force 2 - 5 Nm Description Ordering PN
Switching current (max) 400 mA, 32 VAC,
resistive load
IQAN-LC5-C01-MPB2W0T0 20076996
Thumb wheel
IQAN-LC5-C01-MPB2W0T1 20076997
Rated power supply (Vs) 5 Vdc IQAN-LC5-C01-MPB2W2T1 20076999
Load resistive (min) 4.5 kW IQAN-LC5-C01-MPB4W0T0 20077000
Load capacitive (max) 1 uF IQAN-LC5-C01-MPB4W0T1 20077001
Current consumption (typ) 16 mA
Analog output active range 10%-90% Vs IQAN-LC5-C01-MPB4W1T1 20077003
Resolution < 2 mV IQAN-LC5-C01-MPB8W0T1 20077005
Angle of movement ± 25 degrees Consult datasheet and pricelist for other
Expected life (operations) 5 million IQAN-LC5-C01-MP options and ordering part numbers.
Connection
B0W0T1 / B2W0T0 / Deutsch DTM, 6 pos.
B2W0T1 / B4W0T0
B4W0T1 / B4W1Tx / Deutsch DTM, 12 pos.
B2W2Tx / B8W0Tx
MP standard faceplate configurations
B2W0T0 B4W0T0 B8W0T0


units=mm

Catalog HY33-1825/US Cables and connector kits
Accessories IQAN System Products
Communication cables 5030219
5030124 C4-cable, sealed, key D
USB adapter-cable, panel mount length: 2,5 meters
length: 0,4 meters use with: IQAN-MC3, -MC31
use with: IQAN-MC2, -MD3
20077744
Power/CAN cable
length: 2,0 meters
20077780 use with: IQAN-G3
Ethernet cable
length: 1,5 meters 20077777
use with: IQAN-MD4 C1-C4 cables
length: 2,5 meters
20077785 use with: IQAN-XC21
Ethernet cable, panel mount
length: 1,5 meters 20085102
use with: IQAN-MD4 C1-C2 cables
length: 2,5 meters
use with: IQAN-XC10
Prototype installation cables
5030030
C1-cable, with seals 20085116
length: 2,5 meters C1-cable
use with: IQAN-XA2, -XS2, -XT2, length: 2,5 meters
-MC2 use with: IQAN-MC42, -MC43
5030125 20085117
C1-cable, sealed C-2 cable
length: 2,5 meters length: 2,5 meters
use with: IQAN-MD3, -MD4 use with: IQAN-MC43
5030126 20085124
C2-cable, sealed C-1 cable
length: 2,5 meters length: 2,5 meters
use with: IQAN-MD3, -MD4 use with: IQAN-MC41
50301271 Connector kits

C1-cable, sealed 5031022
length: 2,5 meters C1-connector, 6 position
use with: IQAN-LC5-C01, -C02 use with: IQAN-LF1
1) from catalog HY33-1800/US
5031063
5030216 C1-connector, 42 position
C1-cable, sealed, key A use with: IQAN-XA2, -XS2, -XT2,
length: 2,5 meters -MC2
use with: IQAN-MC3, -MC31
20072406
5030217 C1-connector (grey), 12 position
C2-cable, sealed, key B use with: IQAN-G1, -XC22
length: 2,5 meters
200724081
C1-connector (grey), 6 position
5030218 use with: IQAN-XC22, -XC23
C3-cable, sealed, key C 1) from catalog HY33-1800/US
length: 2,5 meters

Catalog HY33-1825/US Cables and connector kits
Accessories IQAN System Products
20073081 20085020 - 20085027
C1-connector (grey), 12 position IQAN address tags 0-7 with Molex
C2-connector (black), 12 position MicroFit terminals.
use with: IQAN-MD3, -MD4, -XC23 Bag of 10 pcs.
20085030 - 20085037
5035007 IQAN address/termination tags 0T-
C1/C3-connector (grey), 6 pos. 7T with Molex MicroFit terminals.
C2-connector (grey), 12 position Bag of 10 pcs.
use with: IQAN-LC5-C01, -C02/3
20085050 - 20085057
5035016 IQAN address tags 0-7 with
C1-connector (key A), 18 position Deutsch DT terminals.
C2-connector (key B), 18 position Bag of 10 pcs.
C3-connector (key C), 18 position 20085060 - 20085067
C4-connector (key D), 18 position IQAN address/termination tags 0T-
use with: IQAN-MC3, -MC31 7T with Deutsch DT terminals.
Bag of 10 pcs.
20077776
C1-connector, 12 position 20085130 - 20085133
C2-connector, 6 position IQAN address tags 0-3 with Molex
C3-connector, 8 position MX64 terminals.
C4-connector, 10 position Bag of 10 pcs.
use with: IQAN-XC21
20085140 - 20085143
IQAN address/termination tags 0T-
20085114 3T with Molex MX64 terminals.
C1-connector, 66 position Bag of 10 pcs.
use with: IQAN-MC4x
20085115
C2-connector, 73 position
use with: IQAN-MC43
Additional items
5010011
IQAN-LF1 electric speed/throttle
pedal (legacy product).
use with: Engine ECUs, IQAN
systems.
Address tags 20085100

5030060 - 5030067 IQAN-G11 Bluetooth® gateway for
IQAN address tags 0-7 with AMP remote diagnostics
terminals. use with: IQAN-MD3, -MD4, -MC2.
Bag of 10 pcs.
5030070 - 5030077 20085106
IQAN address/termination tags 0T- IQAN-SV hardened IP camera.
7T with AMP terminals. use with: IQAN-MD4 displays.
Bag of 10 pcs.
5030160 - 5030167
IQAN address tags 0-7 with
Deutsch DTM terminals.
Bag of 10 pcs.
5030170 - 5030177
IQAN address/termination tags 0T-
7T with Deutsch DTM terminals.
Bag of 10 pcs. Consult "IQAN accessories" datasheet and pricelist for
other accessory items and ordering part numbers.

Catalog HY33-1825/US
Terms of Sale with Warranty Limitations
Offer of Sale
The goods, services or work (referred to as the “Products”) offered by Parker-Hannifin Corporation, its subsidiaries, groups, divisions, and authorized distributors (“Seller”) are offered for sale at
prices indicated in the offer, or as may be established by Seller. The offer to sell the Products and acceptance of Seller’s offer by any customer (“Buyer”) is contingent upon, and will be governed
by all of the terms and conditions contained in this Offer of Sale. Buyer’s order for any Products specified in Buyer’s purchase document or Seller’s offer, proposal or quote (“Quote”) attached to the
purchase order, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer.
1. Terms and Conditions. Seller’s willingness to offer Products for sale or accept an order for infringement or any other claim, brought by or incurred by Buyer, Buyer’s employees, or any other
Products is subject to the terms and conditions contained in this Offer of Sale or any newer version person, arising out of: (a) improper selection, application, design, specification or other misuse
of the same, published by Seller electronically at www.parker.com/saleterms/. Seller objects to of Products purchased by Buyer from Seller; (b) any act or omission, negligent or otherwise,
any contrary or additional terms or conditions of Buyer’s order or any other document or other of Buyer; (c) Seller’s use of patterns, plans, drawings, or specifications furnished by Buyer to
communication issued by Buyer. manufacture Products; or (d) Buyer’s failure to comply with these terms and conditions. Seller
2. Price; Payment. Prices stated on Seller’s Quote are valid for thirty (30) days, except as explic- shall not indemnify Buyer under any circumstance except as otherwise provided.
itly otherwise stated therein, and do not include any sales, use, or other taxes or duties unless 12. Cancellations and Changes. Buyer may not cancel or modify or cancel any order for any
specifically stated. Seller reserves the right to modify prices to adjust for any raw material price reason, except with Seller’s written consent and upon terms that will indemnify, defend and hold
fluctuations. Unless otherwise specified by Seller, all prices are F.C.A. Seller’s facility (INCOTERMS Seller harmless against all direct, incidental and consequential loss or damage. Seller may change
2010). Payment is subject to credit approval and payment for all purchases is due thirty (30) Product features, specifications, designs and availability.
days from the date of invoice (or such date as may be specified by Seller’s Credit Department). 13. Limitation on Assignment. Buyer may not assign its rights or obligations under this agreement
Unpaid invoices beyond the specified payment date incur interest at the rate of 1.5% per month without the prior written consent of Seller.
or the maximum allowable rate under applicable law. 14. Force Majeure. Seller does not assume the risk and is not liable for delay or failure to
3. Shipment; Delivery; Title and Risk of Loss. All delivery dates are approximate. Seller is not perform any of Seller’s obligations by reason of events or circumstances beyond its reasonable
responsible for damages resulting from any delay. Regardless of the manner of shipment, delivery control (hereinafter “Events of Force Majeure”). Events of Force Majeure shall include without
occurs and title and risk of loss or damage pass to Buyer, upon placement of the Products with limitation: accidents, strikes or labor disputes, acts of any government or government agency,
the shipment carrier at Seller’s facility. Unless otherwise stated, Seller may exercise its judgment acts of nature, delays or failures in delivery from carriers or suppliers, shortages of materials, or
in choosing the carrier and means of delivery. No deferment of shipment at Buyers’ request any other cause beyond Seller’s reasonable control.
beyond the respective dates indicated will be made except on terms that will indemnify, defend 15. Waiver and Severability. Failure to enforce any provision of this agreement will not invalidate
and hold Seller harmless against all loss and additional expense. Buyer shall be responsible for that provision; nor will any such failure prejudice Seller’s right to enforce that provision in the
any additional shipping charges incurred by Seller due to Buyer’s acts or omissions. future. Invalidation of any provision of this agreement by legislation or other rule of law shall not
4. Warranty. Seller warrants that the Products sold hereunder shall be free from defects in mate- invalidate any other provision herein. The remaining provisions of this agreement will remain
rial or workmanship for a period of twelve (12) months from the date of delivery or 2,000 hours in full force and effect.
of normal use, whichever occurs first. All prices are based upon the exclusive limited warranty 16. Termination. Seller may terminate this agreement for any reason and at any time by giving
stated above, and upon the following disclaimer: DISCLAIMER OF WARRANTY: THIS WARRANTY Buyer thirty (30) days prior written notice. Seller may immediately terminate this agreement, in
IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO PRODUCTS PROVIDED. SELLER DISCLAIMS writing, if Buyer: (a) breaches any provision of this agreement (b) appoints a trustee, receiver or
ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING DESIGN, MERCHANTABILITY AND custodian for all or any part of Buyer’s property (c) files a petition for relief in bankruptcy on its
FITNESS FOR A PARTICULAR PURPOSE. own behalf, or one if filed by a third party (d) makes an assignment for the benefit of creditors;
5. Claims; Commencement of Actions. Buyer shall promptly inspect all Products upon receipt. No or (e) dissolves its business or liquidates all or a majority of its assets.
claims for shortages will be allowed unless reported to the Seller within ten (10) days of delivery. 17. Governing Law. This agreement and the sale and delivery of all Products are deemed to have
No other claims against Seller will be allowed unless asserted in writing within thirty (30) days taken place in, and shall be governed and construed in accordance with, the laws of the State
after delivery. Buyer shall notify Seller of any alleged breach of warranty within thirty (30) days of Ohio, as applicable to contracts executed and wholly performed therein and without regard to
after the date the defect is or should have been discovered by Buyer. Any claim or action against conflicts of laws principles. Buyer irrevocably agrees and consents to the exclusive jurisdiction
Seller based upon breach of contract or any other theory, including tort, negligence, or otherwise and venue of the courts of Cuyahoga County, Ohio with respect to any dispute, controversy or
must be commenced within twelve (12) months from the date of the alleged breach or other claim arising out of or relating to this agreement.
alleged event, without regard to the date of discovery. 18. Indemnity for Infringement of Intellectual Property Rights. Seller is not liable for infringement of
6. LIMITATION OF LIABILITY. IN THE EVENT OF A BREACH OF WARRANTY, SELLER WILL, AT ITS any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided
OPTION, REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE PURCHASE PRICE WITHIN in this Section. Seller will defend and indemnify Buyer against allegations of infringement of U.S.
A REASONABLE PERIOD OF TIME. IN NO EVENT IS SELLER LIABLE FOR ANY SPECIAL, INDIRECT, patents, U.S. trademarks, copyrights, trade dress and trade secrets (“Intellectual Property Rights”).
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR AS THE RESULT OF, THE SALE, Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an
DELIVERY, NON-DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS OR ANY PART action brought against Buyer based on an allegation that a Product sold pursuant to this agree-
THEREOF, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER’S ment infringes the Intellectual Property Rights of a third party. Seller’s obligation to defend and
WRITTEN CONSENT, WHETHER BASED IN CONTRACT, TORT OR OTHER LEGAL THEORY. IN NO indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes
EVENT SHALL SELLER’S LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE aware of such allegations of infringement, and Seller having sole control over the defense of any
PRICE OF THE PRODUCTS. allegations or actions including all negotiations for settlement or compromise. If a Product is subject
7. User Responsibility. The user, through its own analysis and testing, is solely responsible for to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole
making the final selection of the system and Product and assuring that all performance, endurance, expense and option, procure for Buyer the right to continue using the Product, replace or modify
maintenance, safety and warning requirements of the application are met. The user must analyze the Product so as to make it noninfringing, or offer to accept return of the Product and refund
all aspects of the application and follow applicable industry standards and Product information. the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing,
If Seller provides Product or system options based upon data or specifications provided by the Seller is not liable for claims of infringement based on information provided by Buyer, or directed
user, the user is responsible for determining that such data and specifications are suitable to Products delivered hereunder for which the designs are specified in whole or part by Buyer,
and sufficient for all applications and reasonably foreseeable uses of the Products or systems. or infringements resulting from the modification, combination or use in a system of any Product
8. Loss to Buyer’s Property. Any designs, tools, patterns, materials, drawings, confidential sold hereunder. The foregoing provisions of this Section constitute Seller’s sole and exclusive
information or equipment furnished by Buyer or any other items which become Buyer’s property, liability and Buyer’s sole and exclusive remedy for infringement of Intellectual Property Rights.
will be considered obsolete and may be destroyed by Seller after two (2) consecutive years have 19. Entire Agreement. This agreement contains the entire agreement between the Buyer and
elapsed without Buyer ordering the items manufactured using such property. Seller shall not be Seller and constitutes the final, complete and exclusive expression of the terms of sale. All prior
responsible for any loss or damage to such property while it is in Seller’s possession or control. or contemporaneous written or oral agreements or negotiations with respect to the subject matter
9. Special Tooling. A tooling charge may be imposed for any special tooling, including without are herein merged. The terms contained herein may not be modified unless in writing and signed
limitation, dies, fixtures, molds and patterns, acquired to manufacture Products. Such special by an authorized representative of Seller.
tooling shall be and remain Seller’s property notwithstanding payment of any charges by Buyer. 20. Compliance with Laws. Buyer agrees to comply with all applicable laws, regulations, and
In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in industry and professional standards of care, including those of the United Kingdom, the United
the manufacture of the Products, even if such apparatus has been specially converted or adapted States of America, and the country or countries in which Buyer may operate, including without
for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, limitation the U. K. Bribery Act, the U.S. Foreign Corrupt Practices Act (“FCPA”), the U.S. Anti-Kickback
Seller has the right to alter, discard or otherwise dispose of any special tooling or other property Act (“Anti-Kickback Act”) and the U.S. Food Drug and Cosmetic Act (“FDCA”),each as currently
in its sole discretion at any time. amended, and the rules and regulations promulgated by the U.S. Food and Drug Administration
10. Buyer’s Obligation; Rights of Seller. To secure payment of all sums due or otherwise, Seller (“FDA”), and agrees to indemnify and hold harmless Seller from the consequences of any viola-
retains a security interest in all Products delivered to Buyer and this agreement is deemed to tion of such provisions by Buyer, its employees or agents. Buyer acknowledges that it is familiar
be a Security Agreement under the Uniform Commercial Code. Buyer authorizes Seller as its with the provisions of the U. K. Bribery Act, the FCPA, the FDA, and the Anti-Kickback Act, and
attorney to execute and file on Buyer’s behalf all documents Seller deems necessary to perfect certifies that Buyer will adhere to the requirements thereof. In particular, Buyer represents and
its security interest. agrees that Buyer will not make any payment or give anything of value, directly or indirectly to
11. Improper Use and Indemnity. Buyer shall indemnify, defend, and hold Seller harmless from any governmental official, any foreign political party or official thereof, any candidate for foreign
any losses, claims, liabilities, damages, lawsuits, judgments and costs (including attorney fees political office, or any commercial entity or person, for the purpose of influencing such person to
and defense costs), whether for personal injury, property damage, patent, trademark or copyright purchase Products or otherwise benefit the business of Seller.
05/14

Parker Hydraulics International Sales Offices
North America Industrial Sales Asia Pacific
Hydraulics Group Headquarters Central Region Parker Hannifin Shanghai Ltd
6035 Parkland Boulevard 1042 Maple Avenue 280 Yunqiao Road,
Cleveland, OH 44124-4141 USA Unit 331 Jin Qiao Export Processing Zone
Tel: 216-896-3000 Lisle, IL 60532 USA Shanghai 201206, China
Fax: 216-896-4031 Tel: 630-964-0796 Tel: 86 21 2899 5000
Parker Canada Division Great Lakes Region Fax: 86 21 6445 9917
160 Chisholm Drive Milton 6035 Parkland Boulevard Parker Hannifin Hong Kong Ltd
Ontario Canada L9T 3G9 Cleveland, OH 44124-4141 USA 8/F, Kin Yip Plaza
Tel: 905-693-3000 Tel: 216-896-2740 9 Cheung Yee Street
Fax: 905-876-1958 Fax: 866-498-7507 Cheung Sha Wan, Hong Kong
Parker Hannifin de México Gulf Region Tel: 852 2428 8008
Industrial Hydraulic Sales 20002 Standing Cypress Drive Fax: 852 2425 6896
Eje Uno Norte No.100 Spring, TX 77379 USA Parker Hannifin Korea Ltd
Parque Industrial Toluca 2000 Tel: 817-473-4431 9F KAMCO Yangjae Tower
Toluca, Edo, de Mexico CP 50100 Fax: 888-227-9454 949-3 Dogok1-dong, Gangnam-gu
Tel: 52 722 275 4200 Southwest Region Seoul, 135-860, Korea
Fax: 52 722 279 9308 700 S. 4th Avenue Tel: 82 2 559 0400
Parker Hannifin de México Mansfield, TX 76063 USA Fax: 82 2 556 8187
Mobile Hydraulic Sales Tel: 817-473-9341 Parker Hannifin India Pvt Ltd
Via de FFCC a Matamoraos 730 Fax: 817-473-2680 Plot No. EL-26, MIDC
Apodaca, NL, de Mexico CP 66600 Mid Atlantic and Southeast TTC Industrial Area
Tel: 52 81 8156 6000 Regions Mahape, Navi Mumbai, 400 709 India
Fax: 52 81 8156 6068 1225 Old Alpharetta Road Tel: 91 22 6513 7081
Suite 290 Fax: 91 22 2768 6841
Alpharetta, GA 30005 USA Parker Hannifin Australia
Europe
Tel: 770-619-9767 Parker Hannifin Pty Ltd.
Hydraulics Group Headquarters
Fax: 770-619-9806 9 Carrington Road
La Tuilière 6 Castle Hill, NSW 2154, Australia
Midwest Region
1163 Etoy - Switzerland Tel: 612 9634 7777
Tel: 41 21 821 8500 8145 Lewis Road
Minneapolis, MN 55427 USA Fax: 612 9842 5111
Fax: 41 21 821 8580
Tel: 763-513-3535
Fax: 763-544-3418 Latin America
South Africa Northeast Region Parker Hannifin Ind. e Com. Ltda
Parker Hannifin Africa Pty Ltd P.O. Box 396 Hydraulics Division
P.O. Box 1153 Pine Brook, NJ 07058 USA Av. FredericoRitter, 1100
ZA-Kempton Park 1620, Tel: 973-227-2565 94930-000 Cachoeirinha RS, Brazil
Republic of South Africa Fax: 973-227-2467 Tel: 55 51 3470 6090
Tel: 27 11 961 0700 Northwest Region Fax: 55 51 3470 9281
Fax: 27 11 392 7213 6458 North Basin Avenue Parker Hannifin Argentina S.A.I.C.
Portland, OR 97217 USA Stephenson 2711
Mobile Sales Tel: 503-283-1020 1667-Tortuguitas-Malvinas Argentinas
Mobile Sales Organization Fax: 866-611-7308 Pcia. de Buenos Aires, Argentina
and Global Sales Pacific Region Tel: 54 3327 44 4129
850 Arthur Avenue 8460 Kass Drive Fax: 54 3327 44 4199
Elk Grove Village, IL 60007 USA Buena Park, CA 90621 Pan American Division
Tel: 847-258-6200 Tel: 714-228-2510 7400 NW 19th Street, Suite A
Fax: 847-258-6299 Fax: 714-228-2511 Miami, FL 33126 USA
Tel: 305-470-8800
Fax: 305-470-8808
© 2009-2016 Parker Hannifin Corporation. All rights reserved. Catalog HY33-1825/US 12/2016
Parker Hannifin Corporation

850 Arthur Avenue
phone 800 221 9257
ecdinfo@parker.com
www.parker.com/ecd Your Local Authorized Parker Distributor

IQAN Catalog HY33-1825 Us

Uploaded by

Copyright:

Available Formats

IQAN Catalog HY33-1825 Us

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

IQAN Catalog HY33-1825 Us

Uploaded by

Copyright:

Available Formats

Electronic Control Systems

IQAN® System Products

WARNING - USER RESPONSIBILITY

II Parker Hannifin Corporation

III Parker Hannifin Corporation

IQAN Creative studio

1 Parker Hannifin Corporation

2 Parker Hannifin Corporation

3 Parker Hannifin Corporation

Type 1 x Molex MX123, 66 pos.

4 Parker Hannifin Corporation

Type 1 x Molex MX123, 66 pos.

5 Parker Hannifin Corporation

Signal high 4 Vdc - 32 Vdc

6 Parker Hannifin Corporation

7 Parker Hannifin Corporation

8 Parker Hannifin Corporation

1) the USB driver circuit was updated on January 1, 2015.

9 Parker Hannifin Corporation

10 Parker Hannifin Corporation

11 Parker Hannifin Corporation

12 Parker Hannifin Corporation

13 Parker Hannifin Corporation

14 Parker Hannifin Corporation

15 Parker Hannifin Corporation

16 Parker Hannifin Corporation

MP standard faceplate configurations

B2W0T0 B4W0T0 B8W0T0

B2W2T0 B4W1T0 B0W0T0

17 Parker Hannifin Corporation

50301271 Connector kits

18 Parker Hannifin Corporation

Address tags 20085100

19 Parker Hannifin Corporation

20 Parker Hannifin Corporation

Parker Hannifin Corporation

You might also like