Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 389 views

    Hybrid Combiner 2:1 698 - 2690 MHZ 2 X 60 W: Excellent Intermodulation Performance

    Uploaded by

    Radu Barbu
    The Hybrid Combiner 2:1 is designed to combine two transmitter or receiver signals between 698-2690 MHz onto a single antenna. It has excellent intermodulation performance and can accommodate a small frequency spacing between signals. The combiner is suitable for indoor or outdoor use and can be wall or mast mounted. It has a power rating of 60W per input port and low insertion loss between ports of 3.1 dB.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hybrid Combiner 2:1 698 - 2690 MHZ 2 X 60 W: Excellent Intermodulation Performance

    Uploaded by

    Radu Barbu
    389 views2 pages
    The Hybrid Combiner 2:1 is designed to combine two transmitter or receiver signals between 698-2690 MHz onto a single antenna. It has excellent intermodulation performance and can accommodate a small frequency spacing between signals. The combiner is suitable for indoor or outdoor use and can be wall or mast mounted. It has a power rating of 60W per input port and low insertion loss between ports of 3.1 dB.

    Original Title

    78210504.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Hybrid Combiner 2:1 is designed to combine two transmitter or receiver signals between 698-2690 MHz onto a single antenna. It has excellent intermodulation performance and can accommodate a small frequency spacing between signals. The combiner is suitable for indoor or outdoor use and can be wall or mast mounted. It has a power rating of 60W per input port and low insertion loss between ports of 3.1 dB.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    389 views2 pages

    Hybrid Combiner 2:1 698 - 2690 MHZ 2 X 60 W: Excellent Intermodulation Performance

    Uploaded by

    Radu Barbu
    The Hybrid Combiner 2:1 is designed to combine two transmitter or receiver signals between 698-2690 MHz onto a single antenna. It has excellent intermodulation performance and can accommodate a small frequency spacing between signals. The combiner is suitable for indoor or outdoor use and can be wall or mast mounted. It has a power rating of 60W per input port and low insertion loss between ports of 3.1 dB.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Hybrid Combiner 2:1

    698 – 2690 MHz


    2 x 60 W

    • Designed for the decoupled combining of 2 transmitter


    or receiver signals onto one common antenna
    • The frequency spacing between transmitter signals can
    be as small as required
    • Excellent intermodulation performance
    Port 3
    • Suitable for indoor or outdoor applications
    • Wall or mast mounting Port 1

    • DC by-pass between port 1 and port 3

    Port 2
    Technical Data
    Type No. 782 10504
    Frequency range 698 – 2690 MHz
    Attenuation
    Port 1 ↔ Port 3 3.1 ±0.5 dB
    Port 2 ↔ Port 3 3.1 ±0.5 dB
    Port 1 ↔ Port 2 > 23 dB*
    VSWR (all ports) < 1.2 (698 – 2170 MHz) / < 1.25 (2170 – 2690 MHz)
    Impedance 50 Ω
    Input power
    Port 1 < 60 W
    Port 2 < 60 W
    Intermodulation products < –160 dBc (3 rd order; with 2 x 20 W)
    Temperature range –40 … +55 °C
    Connectors 7-16 female (long neck)
    Application Indoor or outdoor (IP 66)
    DC/AISG transparency
    Port 1 ↔ Port 3 By-pass (max. 2500 mA)
    Port 2 ↔ Port 3 Stop
    Mounting Wall mounting: With 4 screws (max. 8 mm diameter)
    Mast mounting: With additional clamp set
    Weight 4.3 kg
    Packing size 385 x 345 x 168 mm
    Dimensions (w x h x d) 264 x 203 x 72.5 mm
    (without connectors, without mounting brackets)

    * Valid if all ports are terminated with 50-Ohm loads.

    Note:
    The input power rating of 60 W per port is specified at an ambient temperature
    of +55 °C with the combiner mounted vertically, without additional cooling, and
    while respecting the safety standard EN IEC 60950 (max. surface temperature Accessories (order separately)
    +90 °C).
    Clamp Set
    Subject to alteration.

    If used at a lower ambient temperature, then a higher input power in accor- Clamp set
    dance with the following table is possible: Type No. suitable for mast
    diameter of
    Max. input power per port 734 360 34 – 60 mm

    Mounted horizontally Mounted vertically 734 361 60 – 80 mm


    734 362 80 – 100 mm
    734 363 100 – 120 mm
    936.3737

    734 364 120 – 140 mm


    Max. ambient
    temperature 734 365 45 – 125 mm
    +55 °C 55 W 60 W *131 1847 50 – 145 mm
    +40 °C 70 W 75 W *U.S. Customers order 131 1847

    +25 °C 80 W 85 W

    782 10504 Page 1 of 2


    All specifications are subject to change without notice.
    The latest specifications are available at www.kathreinusa.com
    Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
    Phone: 214.238.8800 Fax: 214.238.8801 Email: info@kathrein.com
    Hybrid Combiner 2:1
    698 – 2690 MHz
    2 x 60 W

    Please note:
    As a result of more stringent legal regulations and judgements regarding
    product liability, we are obliged to point out certain risks that may arise
    when products are used under extraordinary operating conditions.
    Extraordinary operating conditions, such as heavy icing or exceptional dyna-
    Subject to alteration.

    mic stress (e.g. strain caused by oscillating support structures), may result in
    the breakage of a mast mounted device or even cause it to fall to the ground.
    These facts must be considered during the site planning process.
    The Hybrid Combiner is designed to operate under the environmental condi-
    tions as described in ETS 300 019-1-4 class 4.1 E and have passed environ-
    mental tests as recommended in ETS 300 019-2-4.
    The installation team must be properly qualified and also be familiar with
    the relevant national safety regulations.
    936.3737

    The details given in our data sheets have to be


    followed carefully when installing the combiner
    and accessories.
    The limits for the coupling torque of RF connec-
    tors, recommended by the connector manufactu-
    rers must be obeyed.
    Any previous datasheet issues have now become
    invalid.

    Page 2 of 2 782 10504 All specifications are subject to change without notice.
    The latest specifications are available at www.kathreinusa.com
    Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
    Phone: 214.238.8800 Fax: 214.238.8801 Email: info@kathrein.com

    You might also like