Dual-Band Combiner

470 – 960 MHz 1710 – 2700 MHz

LTE 800 / CDMA 850 / GSM 900 GSM 1800 / UMTS 2100 / WiMAX / LTE 2600

• Designed for co-siting purposes

• Enables feeder sharing
• Can be used as a combiner near the BTS or
in a reciprocal function near the antenna
• Suitable for indoor or outdoor applications Port 1

• Wall or mast mounting

• Available as a single unit, or for XPol antennas Port 3
as a double unit
Port 2
• Built-in lightning protection
• External DC stop available as an accessory 782 10660, 782 10662, 782 10664 782 10661, 782 10663, 782 10665
Single Unit Double Unit
• Extremely small dimensions and low weight
• Very low insertion loss
• High input power

470 – 960 1710 – 2700 470 – 960 1710 – 2700 470 – 960 1710 – 2700

Technical Data
Type No. 782 10660 782 10662 782 10664
Single Unit Single Unit Single Unit

782 10661 782 10663 782 10665

Double Unit Double Unit Double Unit
Pass band
Band 1 470 – 960 MHz
Band 2 1710 – 2700 MHz
Insertion loss
Port 1 ÷ Port 3 < 0.1 dB (470 – 960 MHz)
Port 2 ÷ Port 3 < 0.1 dB (1710 – 2700 MHz)
Isolation
Port 1 ÷ Port 2 > 55 dB (470 – 960 MHz) / > 65 dB (1710 – 2700 MHz)
VSWR < 1.2 (470 – 960 / 1710 – 2700 MHz)
Impedance 50 Ohm
Input power
Band 1 / Band 2 < 650 W / < 350 W
Subject to alteration.

Intermodulation products < –160 dBc (3 rd order with 2 x 20 W)

Temperature range –55 ... +60 °C
Connectors 7-16 female (long neck)
Application Indoor or outdoor (IP 66)
DC/AISG transparency
Port 1 ÷ Port 3 By-pass (max. 2500 mA) Stop By-pass (max. 2500 mA)
Port 2 ÷ Port 3 By-pass (max. 2500 mA) By-pass (max. 2500 mA) Stop
936.3891/a

Lightning protection 3 kA, 10/350 μs pulse

Mounting Wall mounting: With 4 screws (max. 8 mm diameter) / Mast mounting: With additional clamp set
Weight Single Unit: 1.2 kg / Double Unit: 2.4 kg
Packing size Single Unit: 285 x 157 x 93 mm / Double Unit: 285 x 157 x 148 mm
Dimensions (w x h x d) Single Unit: 126 x 145 x 38 mm / Double Unit: 126 x 145 x 93 mm
(without connectors, without mounting brackets)

782 10660, 782 10661, 782 10662, 782 10663, 782 10664, 782 10665 Page 1 of 2
All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: info@kathrein.com
Dual-Band Combiner
470 – 960 MHz 1710 – 2700 MHz
LTE 800 / CDMA 850 / GSM 900 GSM 1800 / UMTS 2100 / WiMAX / LTE 2600

Accessories (order separately)

Typical Attenuation Curves
Clamp set Clamp Set Diagram I
Type No. suitable for mast Port 1 ÷ Port 3 Port 2 ÷ Port 3
diameter of 0

Attenuation/dB
734 360 34 – 60 mm
-10
734 361 60 – 80 mm
-20
734 362 80 – 100 mm 470 – 960 1710 – 2700

734 363 100 – 120 mm -30

734 364 120 – 140 mm DC stop -40

734 365 45 – 125 mm -50

*131 1847 50 – 145 mm -60

*U.S. Customers order 131 1847
-70
50-Ohm load
-80
Type No. Description
-90
782 10850 DC stop
-100
784 10367 50-Ohm load 0 300 600 900 1200 1500 1800 2100 2400 2700 3000
Frequency/MHz

Diagram II
Port 1 ÷ Port 3 Port 2 ÷ Port 3
0
Attenuation/dB

-0.1

-0.2
470 – 960 1710 – 2700
-0.3

-0.4

-0.5

-0.6

-0.7

-0.8
Side view
Single Unit -0.9

-1.0
0 300 600 900 1200 1500 1800 2100 2400 2700 3000
Frequency/MHz

Side view
Double Unit
Please note:
As a result of more stringent legal regulations and judgements regarding
product liability, we are obliged to point out certain risks that may arise
when products are used under extraordinary operating conditions.
Extraordinary operating conditions, such as heavy icing or exceptional dyna-
Subject to alteration.

mic stress (e.g. strain caused by oscillating support structures), may result in
the breakage of a mast mounted device or even cause it to fall to the ground.
These facts must be considered during the site planning process.
Top view The Dual-band Combiners are designed to operate under the environmental
Single Unit, conditions as described in ETS 300 019-1-4 class 4.1 E and have passed
Double Unit environmental tests as recommended in ETS 300 019-2-4.
The installation team must be properly qualified and also be familiar with
the relevant national safety regulations.
936.3891/a

The details given in our data sheets have to be followed carefully when
installing the combiner and accessories.
The limits for the coupling torque of RF connectors,
recommended by the connector manufacturers must
be obeyed.
Terminate unused inputs with a suitable 50-Ohm load,
e.g. 784 10367.
Any previous datasheet issues have now become
invalid.

Page 2 of 2 782 10660, 782 10661, 782 10662, 782 10663, 782 10664, 782 10665
All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: info@kathrein.com