CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT EW3 -PAYA LEBAR EHT CABLE SUPPORT
NUMBER A1601-02232-2012-ST363
CONNECTION Member a1 to a1
Design Information Material properties

1
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 28-09-2015
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN
DWG NO
l properties

2
CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT EW3-KALLANG BUILDING
NUMBER A1601-02231-2012-ST74
Design Information Material properties
Supporting Plate details = 220 X 350 X 20 mm thk
Depth D = 350.00 mm
Width b = 220.00 mm
Plate thickness
tp = 20.00 mm

Supported beam = UB 254x146x37 kg/m Bolt details

Depth D = 256.00 mm
Width b = 146.40 mm
Flange thickness, End/Fin Plate details
tf = 10.90 mm Steel grade
Web thickness Yield stress
tw = 6.30 mm Thickeness
Depth between flanges Width
d = 219.00 mm Depth
Tensile stress

Bearing stress

Design forces
Maximum shear force
Vu = 17.50 kN
CHODAI - BURO ENGINEERING PTE. LTD.

Connection design check

Check 1 Detailing check
Edge distance from the end plate a = 110.00 mm
Length of the fin plate lpfin = 200.00 mm
Thickness of fin plate tpfin = 10.00 mm
Bolt edge distances e1 = 40.00 mm
e2 = 40.00 mm
Bolt pitch vertical p = 60.00 mm
horizontal gb = 80.00 mm
Check 2 Supported beam Bolt group check
Bearing capacity per bolt Pbs = min(dbolt*tf*pbs.f*f, dbolt*tw*pbs.b)
Bearing capacity of fin plate Pbs.f = 92.00 kN
Bearing capacity of supported beam web Pbs.b = 57.96 kN
Bearing capacity per bolt Pbs = 57.96 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = ((Fsv + Fsmv)2 + Fsmh2)0.5
Vertical force on the bolt due to moment Fsv = Vu/2n
Number of bolt rows n = 3 nos
Fsv = 2.9 kN
Centre of gravity of the bolt group
x-axis location = 60.0 mm
y-axis location = 40.0 mm
Moment on the bolt group due to eccentricity
M = Vu*(a+y)
M = 2.63 kNm
Inertia of bolt group Ibg = 24000 sq.mm
Vertical force on the outermost bolt due to moment
Fsmv = 4.38 kN
Horizontal force on the outermost bolt due to moment
Fsmh = 6.56 kN
Fs = 9.81 kN
CHODAI - BURO ENGINEERING PTE. LTD.
Check 3 Supported beam - Shear and bending interaction check
Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional buckling check of
i) Shear check
Effective Area of fin plate Av = 1800 sq.mm
Net Area of fin plate Av.net = 600 sq.mm
0.6*py*Av = 297.00 kN
0.7*py*Ke*Av.net = 138.60 kN
Effective length for block shear
Lv = 160.00 mm
Shear force of Fin plate Pvmin = 138.60 kN
ii) Shear & Bending check
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 1.93 kNm
Moment capcity of the fin plate
Mc = 18.33 kNm
iii) Lateral torsional buckling resistance of long fin plates
Lateral torsional buckling resistance moment of the fin plate
Condition 1 Mb >=Vu*a
Mb = pb*Zx
pb = Bending strength of fin plate obta
based on λLT as follows.
λLT = 2.8*((LE*l)/(1.5*tf*tf))0.5
= 33.91
pb = 275 MPa
Zx = tf*l*l/6
= 66666.7 cu.mm
Mb/mLT = 30.56 kNm
Condition 2 py * Zx >=Vu*a
py * Zx = 18.33 kNm
Check 4 Supporting beam - Shear and bending capacity at the connection
Shear capacity of end plate
Shear check
Effective Area of web Av = 4000 sq.mm
Net Area of web Av.net = 1600 sq.mm
0.6*py*Av = 660.00 kN
0.7*py*Ke*Av.net = 369.60 kN
Shear capacity of supporting beam Pvmin = 369.60 kN
Check 5 Weld capacity check
Weld thickness used = 6.00 mm
Weld capacity check = 0.92 kN/mm
Weld length = 400.00 mm
CHODAI - BURO ENGINEERING PTE. LTD.
Overall weld capacity = 369.60 kN
Check 6 Simple bolt capacity check
Shear capacity of one bolt Vbolt.cap = 91.9 kN
No. of bolts required Nosreq = 0.19
No. of bolts provided Nosprov =6
Check 7 Supporting beam Local capacity check
Local shear capacity of end plate
Av = 3600 sq.mm
Pv = 594.00 kN
End plate bending check
Maximum tension force in the uppermost bolt
Vertical Spacing of Hilti bolts = 200.00 mm
No of rows = 2 nos
Maximum tension force in the uppermost bolt = 4.81 kN
Distance from the fin plate = 100.00 mm
Maximum moment in end plate due to bending = 0.48 kNm
Bending capacity of the end plate = 5.50 kNm
Punching shear capacity, conservative check VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 02-08-2016
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN

Steel grade pyb = 275 MPa

Yield stress pyb = 275 MPa
Tensile stress
pub = 413 MPa
Bearing stress
pbs = 460 MPa

Bolt dia dbolt = 20.00 mm

Hole dia dhole = 40.00 mm
late details
pyb = 275 MPa
pyb = 275 MPa
tep = 10.00 mm
Wep = 240.00 mm
lep = 200.00 mm

pub = 413 MPa

pbs = 460 MPa

 CHODAI - BURO ENGINEERING PTE. LTD.

>=2 x Bolt dia, o.k.

>=0.6D, o.k.
> 0.5 x Bolt dia,o.k.
>=2 x Bolt dia, o.k.
>=2 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.

*tf*pbs.f*f, dbolt*tw*pbs.b)

)2 + Fsmh2)0.5
mv

VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

orsional buckling check of fin plate required

Plain Shear Pv = 138.60 kN

Block Shear Pr = 303.60 kN

VALID DESIGN

strength of fin plate obtained from BS 5950, Table 17 and

λLT as follows.
*l)/(1.5*tf*tf))0.5

(from BS5950, Table 17)

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.
VALID DESIGN

VALID DESIGN

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT EW3-KALLANG BUILDING
NUMBER A1601-02231-2012-ST74
Design Information Material properties
Supporting Plate details = 220X400X20 mm thk
Depth D = 450.00 mm
Width b = 220.00 mm
Plate thickness
tp = 20.00 mm

Supported beam = UB 305X165X52 kg/m Bolt details

Depth D = 317.50 mm
Width b = 166.60 mm
Flange thickness, End/Fin Plate details
tf = 13.20 mm Steel grade
Web thickness Yield stress
tw = 7.60 mm Thickeness
Depth between flanges Width
d = 275.90 mm Depth
Tensile stress

Bearing stress

Design forces
Maximum shear force
Vu = 46.50 kN
CHODAI - BURO ENGINEERING PTE. LTD.

Connection design check

Check 1 Detailing check
Edge distance from the end plate a = 110.00 mm
Length of the fin plate lpfin = 200.00 mm
Thickness of fin plate tpfin = 10.00 mm
Bolt edge distances e1 = 40.00 mm
e2 = 40.00 mm
Bolt pitch vertical p = 60.00 mm
horizontal gb = 80.00 mm
Check 2 Supported beam Bolt group check
Bearing capacity per bolt Pbs = min(dbolt*tf*pbs.f*f, dbolt*tw*pbs.b)
Bearing capacity of fin plate Pbs.f = 92.00 kN
Bearing capacity of supported beam web Pbs.b = 69.92 kN
Bearing capacity per bolt Pbs = 69.92 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = ((Fsv + Fsmv)2 + Fsmh2)0.5
Vertical force on the bolt due to moment Fsv = Vu/2n
Number of bolt rows n = 3 nos
Fsv = 7.8 kN
Centre of gravity of the bolt group
x-axis location = 60.0 mm
y-axis location = 40.0 mm
Moment on the bolt group due to eccentricity
M = Vu*(a+y)
M = 6.98 kNm
Inertia of bolt group Ibg = 24000 sq.mm
Vertical force on the outermost bolt due to moment
Fsmv = 11.63 kN
Horizontal force on the outermost bolt due to moment
Fsmh = 17.44 kN
Fs = 26.07 kN
CHODAI - BURO ENGINEERING PTE. LTD.
Check 3 Supported beam - Shear and bending interaction check
Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional buckling check of
i) Shear check
Effective Area of fin plate Av = 1800 sq.mm
Net Area of fin plate Av.net = 600 sq.mm
0.6*py*Av = 297.00 kN
0.7*py*Ke*Av.net = 138.60 kN
Effective length for block shear
Lv = 160.00 mm
Shear force of Fin plate Pvmin = 138.60 kN
ii) Shear & Bending check
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 5.12 kNm
Moment capcity of the fin plate
Mc = 18.33 kNm
iii) Lateral torsional buckling resistance of long fin plates
Lateral torsional buckling resistance moment of the fin plate
Condition 1 Mb >=Vu*a
Mb = pb*Zx
pb = Bending strength of fin plate obta
based on λLT as follows.
λLT = 2.8*((LE*l)/(1.5*tf*tf))0.5
= 33.91
pb = 275 MPa
Zx = tf*l*l/6
= 66666.7 cu.mm
Mb/mLT = 30.56 kNm
Condition 2 py * Zx >=Vu*a
py * Zx = 18.33 kNm
Check 4 Supporting beam - Shear and bending capacity at the connection
Shear capacity of end plate
Shear check
Effective Area of web Av = 4000 sq.mm
Net Area of web Av.net = 1600 sq.mm
0.6*py*Av = 660.00 kN
0.7*py*Ke*Av.net = 369.60 kN
Shear capacity of supporting beam Pvmin = 369.60 kN
Check 5 Weld capacity check
Weld thickness used = 6.00 mm
Weld capacity check = 0.92 kN/mm
Weld length = 400.00 mm
CHODAI - BURO ENGINEERING PTE. LTD.
Overall weld capacity = 369.60 kN
Check 6 Simple bolt capacity check
Shear capacity of one bolt Vbolt.cap = 91.9 kN
No. of bolts required Nosreq = 0.51
No. of bolts provided Nosprov =6
Check 7 Supporting beam Local capacity check
Local shear capacity of end plate
Av = 3600 sq.mm
Pv = 594.00 kN
End plate bending check
Maximum tension force in the uppermost bolt
Vertical Spacing of Hilti bolts = 250.00 mm
No of rows = 2 nos
Maximum tension force in the uppermost bolt = 10.23 kN
Distance from the fin plate = 100.00 mm
Maximum moment in end plate due to bending = 1.02 kNm
Bending capacity of the end plate = 6.88 kNm
Punching shear capacity, conservative check VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 02-08-2016
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN

Steel grade pyb = 275 MPa

Yield stress pyb = 275 MPa
Tensile stress
pub = 413 MPa
Bearing stress
pbs = 460 MPa

Bolt dia dbolt = 20.00 mm

Hole dia dhole = 40.00 mm
late details
pyb = 275 MPa
pyb = 275 MPa
tep = 10.00 mm
Wep = 240.00 mm
lep = 200.00 mm

pub = 413 MPa

pbs = 460 MPa

 CHODAI - BURO ENGINEERING PTE. LTD.

>=2 x Bolt dia, o.k.

>=0.6D, o.k.
> 0.5 x Bolt dia,o.k.
>=2 x Bolt dia, o.k.
>=2 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.

*tf*pbs.f*f, dbolt*tw*pbs.b)

)2 + Fsmh2)0.5
mv

VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

orsional buckling check of fin plate required

Plain Shear Pv = 138.60 kN

Block Shear Pr = 303.60 kN

VALID DESIGN

strength of fin plate obtained from BS 5950, Table 17 and

λLT as follows.
*l)/(1.5*tf*tf))0.5

(from BS5950, Table 17)

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.
VALID DESIGN

VALID DESIGN

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT EW3-KALLANG BUILDING
NUMBER A1601-02231-2012-ST74
Design Information Material properties
Supporting Plate details = 200X240X20 mm thk
Depth D = 240.00 mm
Width b = 200.00 mm
Plate thickness
tp = 20.00 mm

Supported beam = PFC-150X75X18 kg/m Bolt details

Depth D = 150.00 mm
Width b = 75.00 mm
Flange thickness, End/Fin Plate details
tf = 10.00 mm Steel grade
Web thickness Yield stress
tw = 5.50 mm Thickeness
Depth between flanges Width
d = 106.00 mm Depth
Tensile stress

Bearing stress

Design forces
Maximum shear force
Vu = 20.00 kN
CHODAI - BURO ENGINEERING PTE. LTD.

Connection design check

Check 1 Detailing check
Edge distance from the end plate a = 110.00 mm
Length of the fin plate lpfin = 140.00 mm
Thickness of fin plate tpfin = 10.00 mm
Bolt edge distances e1 = 40.00 mm
e2 = 50.00 mm
Bolt pitch vertical p = 50.00 mm
horizontal gb = 80.00 mm
Check 2 Supported beam Bolt group check
Bearing capacity per bolt Pbs = min(dbolt*tf*pbs.f*f, dbolt*tw*pbs.b)
Bearing capacity of fin plate Pbs.f = 92.00 kN
Bearing capacity of supported beam web Pbs.b = 50.60 kN
Bearing capacity per bolt Pbs = 50.60 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = ((Fsv + Fsmv)2 + Fsmh2)0.5
Vertical force on the bolt due to moment Fsv = Vu/2n
Number of bolt rows n = 2 nos
Fsv = 5.0 kN
Centre of gravity of the bolt group
x-axis location = 25.0 mm
y-axis location = 40.0 mm
Moment on the bolt group due to eccentricity
M = Vu*(a+y)
M = 3.00 kNm
Inertia of bolt group Ibg = 8900 sq.mm
Vertical force on the outermost bolt due to moment
Fsmv = 13.48 kN
Horizontal force on the outermost bolt due to moment
Fsmh = 8.43 kN
Fs = 20.31 kN
CHODAI - BURO ENGINEERING PTE. LTD.
Check 3 Supported beam - Shear and bending interaction check
Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional buckling check of
i) Shear check
Effective Area of fin plate Av = 1170 sq.mm
Net Area of fin plate Av.net = 370 sq.mm
0.6*py*Av = 193.05 kN
0.7*py*Ke*Av.net = 85.47 kN
Effective length for block shear
Lv = 90.00 mm
Shear force of Fin plate Pvmin = 85.47 kN
ii) Shear & Bending check
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 2.20 kNm
Moment capcity of the fin plate
Mc = 7.75 kNm
iii) Lateral torsional buckling resistance of long fin plates
Lateral torsional buckling resistance moment of the fin plate
Condition 1 Mb >=Vu*a
Mb = pb*Zx
pb = Bending strength of fin plate obta
based on λLT as follows.
λLT = 2.8*((LE*l)/(1.5*tf*tf))0.5
= 28.37
pb = 275 MPa
Zx = tf*l*l/6
= 32666.7 cu.mm
Mb/mLT = 14.97 kNm
Condition 2 py * Zx >=Vu*a
py * Zx = 8.98 kNm
Check 4 Supporting beam - Shear and bending capacity at the connection
Shear capacity of end plate
Shear check
Effective Area of web Av = 2600 sq.mm
Net Area of web Av.net = 1000 sq.mm
0.6*py*Av = 429.00 kN
0.7*py*Ke*Av.net = 231.00 kN
Shear capacity of supporting beam Pvmin = 231.00 kN
Check 5 Weld capacity check
Weld thickness used = 6.00 mm
Weld capacity check = 0.92 kN/mm
Weld length = 280.00 mm
CHODAI - BURO ENGINEERING PTE. LTD.
Overall weld capacity = 258.72 kN
Check 6 Simple bolt capacity check
Shear capacity of one bolt Vbolt.cap = 91.9 kN
No. of bolts required Nosreq = 0.22
No. of bolts provided Nosprov =4
Check 7 Supporting beam Local capacity check
Local shear capacity of end plate
Av = 2520 sq.mm
Pv = 415.80 kN
End plate bending check
Maximum tension force in the uppermost bolt
Vertical Spacing of Hilti bolts = 130.00 mm
No of rows = 2 nos
Maximum tension force in the uppermost bolt = 8.46 kN
Distance from the fin plate = 70.00 mm
Maximum moment in end plate due to bending = 0.59 kNm
Bending capacity of the end plate = 3.58 kNm
Punching shear capacity, conservative check VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 02-08-2016
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN

Steel grade pyb = 275 MPa

Yield stress pyb = 275 MPa
Tensile stress
pub = 413 MPa
Bearing stress
pbs = 460 MPa

Bolt dia dbolt = 20.00 mm

Hole dia dhole = 40.00 mm
late details
pyb = 275 MPa
pyb = 275 MPa
tep = 10.00 mm
Wep = 240.00 mm
lep = 140.00 mm

pub = 413 MPa

pbs = 460 MPa

 CHODAI - BURO ENGINEERING PTE. LTD.

>=2 x Bolt dia, o.k.

>=0.6D, o.k.
> 0.5 x Bolt dia,o.k.
>=2 x Bolt dia, o.k.
>=2 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.

*tf*pbs.f*f, dbolt*tw*pbs.b)

)2 + Fsmh2)0.5
mv

VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

orsional buckling check of fin plate required

Plain Shear Pv = 85.47 kN

Block Shear Pr = 207.90 kN

VALID DESIGN

strength of fin plate obtained from BS 5950, Table 17 and

λLT as follows.
*l)/(1.5*tf*tf))0.5

(from BS5950, Table 17)

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.
VALID DESIGN

VALID DESIGN

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT EW3 -KALLANG BUILDING
NUMBER A1601-02231-2012-ST74
Design Information Material properties
Supporting beam = PFC-250X90X35.5 kg/m
Depth D = 250.00 mm
Width b = 90.00 mm
Flange thickness,
tf = 15.00 mm
Web thickness
tw = 8.00 mm Bolt details
Depth between flanges
d = 220.00 mm
End/Fin Plate details
Supported beam = PFC-250X90X35.5 kg/m Steel grade
Depth D = 250.00 mm Yield stress
Width b = 90.00 mm Thickeness
Flange thickness, Width
tf = 15.00 mm Depth
Web thickness Tensile stress
tw = 8.00 mm
Depth between flanges Bearing stress
d = 220.00 mm
Design forces
Maximum shear force
Vu = 20.00 kN

Connection design check

CHODAI - BURO ENGINEERING PTE. LTD.
Check 1 Detailing check
Edge distance from the end plate a = 60.00 mm
Length of the fin plate lpfin = 162.00 mm
Thickness of fin plate tpfin = 10.00 mm
Bolt edge distances e1 = 40.00 mm
e2 = 40.00 mm
Bolt pitch vertical p = 70.00 mm
horizontal gb = 0.00 mm
Check 2 Supported beam Bolt group check
Bearing capacity per bolt Pbs = min(dbolt*tf*pbs.f*f, dbolt*tw*pbs.b)
Bearing capacity of fin plate Pbs.f = 73.60 kN
Bearing capacity of supported beam web Pbs.b = 58.88 kN
Bearing capacity per bolt Pbs = 58.88 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = ((Fsv + Fsmv)2 + Fsmh2)0.5
Vertical force on the bolt due to moment Fsv = Vu/2n
Number of bolt rows n = 2 nos
Fsv = 5.0 kN
Centre of gravity of the bolt group
x-axis location = 35.0 mm
y-axis location = 0.0 mm
Moment on the bolt group due to eccentricity
M = Vu*(a+y)
M = 1.20 kNm
Inertia of bolt group Ibg = 4900 sq.mm
Vertical force on the outermost bolt due to moment
Fsmv = 0.00 kN
Horizontal force on the outermost bolt due to moment
Fsmh = 8.57 kN
Fs = 9.92 kN
Check 3 Supported beam - Shear and bending interaction check
Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional buckling check no
i) Shear check
Effective Area of fin plate Av = 1350 sq.mm
Net Area of fin plate Av.net = 990 sq.mm
0.6*py*Av = 222.75 kN
CHODAI - BURO ENGINEERING PTE. LTD.
0.7*py*Ke*Av.net = 228.69 kN
Effective length for block shear
Lv = 110.00 mm
Shear force of Fin plate Pvmin = 171.60 kN
ii) Shear & Bending check
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 1.20 kNm
Moment capcity of the fin plate
Mc = 10.31 kNm
Check 4 Supporting beam - Shear and bending capacity at the connection
Shear & bending capacity of the supported beam
i) Shear check
Effective Area of web Av = 1200 sq.mm
Net Area of web Av.net = 912 sq.mm
0.6*py*Av = 198.00 kN
0.7*py*Ke*Av.net = 210.67 kN
Shear capacity of supporting beam Pvmin = 198.00 kN
Check 5 Weld capacity check
Weld thickness used = 6.00 mm
Weld capacity check = 0.92 kN/mm
Weld length = 440.00 mm
Overall weld capacity = 406.56 kN
Check 6 Simple bolt capacity check
Shear capacity of one bolt Vbolt.cap = 58.9 kN
No. of bolts required Nosreq =0
No. of bolts provided Nosprov =2
Check 7 Supporting beam Local capacity check
Local shear capacity of supporting beam
Av = 1166 sq.mm
Pv = 192.46 kN
Punching shear capacity, conservative check VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 02-08-2016
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN
l properties
Steel grade pyb = 275 MPa
Yield stress pyb = 275 MPa
Tensile stress
pub = 413 MPa
Bearing stress
pbs = 460 MPa

Bolt dia dbolt = 16.00 mm

Hole dia dhole = 18.00 mm
Plate details
pyb = 275 MPa
pyb = 275 MPa
tep = 10.00 mm
Wep = 100.00 mm
lep = 162.00 mm

pub = 413 MPa

pbs = 460 MPa

 CHODAI - BURO ENGINEERING PTE. LTD.

>=2 x Bolt dia, o.k.

>=0.6D, o.k.
> 0.5 x Bolt dia, o.k.
>=2 x Bolt dia, o.k.
>=2 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.
< 2 x Bolt dia, Not o.k.

*tf*pbs.f*f, dbolt*tw*pbs.b)
olt

Fsmv)2 + Fsmh2)0.5

VALID DESIGN

torsional buckling check not required

 CHODAI - BURO ENGINEERING PTE. LTD.

Plain Shear Pv = 222.75 kN

Block Shear Pr = 171.60 kN

hear criteria

VALID DESIGN

VALID DESIGN

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT EW3 -KALLANG BUILDING
NUMBER A1601-02231-2012-ST74
Design Information Material properties
Supporting beam = PFC-250X90X35.5 kg/m
Depth D = 250.00 mm
Width b = 90.00 mm
Flange thickness,
tf = 15.00 mm
Web thickness
tw = 8.00 mm Bolt details
Depth between flanges
d = 220.00 mm
End/Fin Plate details
Supported beam = PFC-150X75X18 kg/m Steel grade
Depth D = 150.00 mm Yield stress
Width b = 75.00 mm Thickeness
Flange thickness, Width
tf = 10.00 mm Depth
Web thickness Tensile stress
tw = 5.50 mm
Depth between flanges Bearing stress
d = 106.00 mm
Design forces
Maximum shear force
Vu = 20.00 kN

Connection design check

CHODAI - BURO ENGINEERING PTE. LTD.
Check 1 Detailing check
Edge distance from the end plate a = 50.00 mm
Length of the fin plate lpfin = 110.00 mm
Thickness of fin plate tpfin = 10.00 mm
Bolt edge distances e1 = 30.00 mm
e2 = 40.00 mm
Bolt pitch vertical p = 50.00 mm
horizontal gb = 0.00 mm
Check 2 Supported beam Bolt group check
Bearing capacity per bolt Pbs = min(dbolt*tf*pbs.f*f, dbolt*tw*pbs.b)
Bearing capacity of fin plate Pbs.f = 92.00 kN
Bearing capacity of supported beam web Pbs.b = 50.60 kN
Bearing capacity per bolt Pbs = 50.60 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = ((Fsv + Fsmv)2 + Fsmh2)0.5
Vertical force on the bolt due to moment Fsv = Vu/2n
Number of bolt rows n = 2 nos
Fsv = 5.0 kN
Centre of gravity of the bolt group
x-axis location = 25.0 mm
y-axis location = 0.0 mm
Moment on the bolt group due to eccentricity
M = Vu*(a+y)
M = 1.00 kNm
Inertia of bolt group Ibg = 2500 sq.mm
Vertical force on the outermost bolt due to moment
Fsmv = 0.00 kN
Horizontal force on the outermost bolt due to moment
Fsmh = 10.00 kN
Fs = 11.18 kN
Check 3 Supported beam - Shear and bending interaction check
Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional buckling check no
i) Shear check
Effective Area of fin plate Av = 990 sq.mm
Net Area of fin plate Av.net = 550 sq.mm
0.6*py*Av = 163.35 kN
CHODAI - BURO ENGINEERING PTE. LTD.
0.7*py*Ke*Av.net = 127.05 kN
Effective length for block shear
Lv = 80.00 mm
Shear force of Fin plate Pvmin = 102.30 kN
ii) Shear & Bending check
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 1.00 kNm
Moment capcity of the fin plate
Mc = 5.55 kNm
Check 4 Supporting beam - Shear and bending capacity at the connection
Shear & bending capacity of the supported beam
i) Shear check
Effective Area of web Av = 880 sq.mm
Net Area of web Av.net = 528 sq.mm
0.6*py*Av = 145.20 kN
0.7*py*Ke*Av.net = 121.97 kN
Shear capacity of supporting beam Pvmin = 121.97 kN
Check 5 Weld capacity check
Weld thickness used = 6.00 mm
Weld capacity check = 0.92 kN/mm
Weld length = 440.00 mm
Overall weld capacity = 406.56 kN
Check 6 Simple bolt capacity check
Shear capacity of one bolt Vbolt.cap = 58.9 kN
No. of bolts required Nosreq =0
No. of bolts provided Nosprov =2
Check 7 Supporting beam Local capacity check
Local shear capacity of supporting beam
Av = 792 sq.mm
Pv = 130.68 kN
Punching shear capacity, conservative check VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 02-08-2016
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN
l properties
Steel grade pyb = 275 MPa
Yield stress pyb = 275 MPa
Tensile stress
pub = 413 MPa
Bearing stress
pbs = 460 MPa

Bolt dia dbolt = 20.00 mm

Hole dia dhole = 22.00 mm
Plate details
pyb = 275 MPa
pyb = 275 MPa
tep = 10.00 mm
Wep = 80.00 mm
lep = 110.00 mm

pub = 413 MPa

pbs = 460 MPa

 CHODAI - BURO ENGINEERING PTE. LTD.

>=2 x Bolt dia, o.k.

Not o.k.
> 0.5 x Bolt dia, o.k.
>=1.25 x Bolt dia, o.k.
>=1.25 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.
< 2 x Bolt dia, Not o.k.

*tf*pbs.f*f, dbolt*tw*pbs.b)
olt

Fsmv)2 + Fsmh2)0.5

VALID DESIGN

torsional buckling check not required

 CHODAI - BURO ENGINEERING PTE. LTD.

Plain Shear Pv = 127.05 kN

Block Shear Pr = 102.30 kN

hear criteria

VALID DESIGN

VALID DESIGN

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT EW3 -KALLANG BUILDING
NUMBER A1601-02231-2012-ST74
Design Information Material properties
Supporting beam = PFC-250X90X35.5 kg/m
Depth D = 250.00 mm
Width b = 90.00 mm
Flange thickness,
tf = 15.00 mm
Web thickness
tw = 8.00 mm Bolt details
Depth between flanges
d = 220.00 mm
End/Fin Plate details
Supported beam = PFC-100X50X10.2 kg/m Steel grade
Depth D = 100.00 mm Yield stress
Width b = 50.00 mm Thickeness
Flange thickness, Width
tf = 8.50 mm Depth
Web thickness Tensile stress
tw = 5.00 mm
Depth between flanges Bearing stress
d = 65.00 mm
Design forces
Maximum shear force
Vu = 2.50 kN

Connection design check

CHODAI - BURO ENGINEERING PTE. LTD.
Check 1 Detailing check
Edge distance from the end plate a = 70.00 mm
Length of the fin plate lpfin = 70.00 mm
Thickness of fin plate tpfin = 10.00 mm
Bolt edge distances e1 = 35.00 mm
e2 = 75.00 mm
Bolt pitch vertical p = 35.00 mm
horizontal gb = 70.00 mm
Check 2 Supported beam Bolt group check
Bearing capacity per bolt Pbs = min(dbolt*tf*pbs.f*f, dbolt*tw*pbs.b)
Bearing capacity of fin plate Pbs.f = 73.60 kN
Bearing capacity of supported beam web Pbs.b = 36.80 kN
Bearing capacity per bolt Pbs = 36.80 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = ((Fsv + Fsmv)2 + Fsmh2)0.5
Vertical force on the bolt due to moment Fsv = Vu/2n
Number of bolt rows n = 1 nos
Fsv = 1.3 kN
Centre of gravity of the bolt group
x-axis location = 0.0 mm
y-axis location = 35.0 mm
Moment on the bolt group due to eccentricity
M = Vu*(a+y)
M = 0.26 kNm
Inertia of bolt group Ibg = 1225 sq.mm
Vertical force on the outermost bolt due to moment
Fsmv = 7.50 kN
Horizontal force on the outermost bolt due to moment
Fsmh = 0.00 kN
Fs = 8.75 kN
Check 3 Supported beam - Shear and bending interaction check
Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional buckling check of
i) Shear check
Effective Area of fin plate Av = 630 sq.mm
Net Area of fin plate Av.net = 450 sq.mm
0.6*py*Av = 103.95 kN
CHODAI - BURO ENGINEERING PTE. LTD.
0.7*py*Ke*Av.net = 103.95 kN
Effective length for block shear
Lv = 35.00 mm
Shear force of Fin plate Pvmin = 103.95 kN
ii) Shear & Bending check
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 0.18 kNm
Moment capcity of the fin plate
Mc = 2.25 kNm
Check 4 Supporting beam - Shear and bending capacity at the connection
Shear & bending capacity of the supported beam
i) Shear check
Effective Area of web Av = 560 sq.mm
Net Area of web Av.net = 416 sq.mm
0.6*py*Av = 92.40 kN
0.7*py*Ke*Av.net = 96.10 kN
Shear capacity of supporting beam Pvmin = 92.40 kN
Check 5 Weld capacity check
Weld thickness used = 6.00 mm
Weld capacity check = 0.92 kN/mm
Weld length = 440.00 mm
Overall weld capacity = 406.56 kN
Check 6 Simple bolt capacity check
Shear capacity of one bolt Vbolt.cap = 58.9 kN
No. of bolts required Nosreq =0
No. of bolts provided Nosprov =1
Check 7 Supporting beam Local capacity check
Local shear capacity of supporting beam
Av = 504 sq.mm
Pv = 83.16 kN
Punching shear capacity, conservative check VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 02-08-2016
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN
l properties
Steel grade pyb = 275 MPa
Yield stress pyb = 275 MPa
Tensile stress
pub = 413 MPa
Bearing stress
pbs = 460 MPa

Bolt dia dbolt = 16.00 mm

Hole dia dhole = 18.00 mm
Plate details
pyb = 275 MPa
pyb = 275 MPa
tep = 10.00 mm
Wep = 195.00 mm
lep = 70.00 mm

pub = 413 MPa

pbs = 460 MPa

 CHODAI - BURO ENGINEERING PTE. LTD.

>=2 x Bolt dia, o.k.

>=0.6D, o.k.
> 0.5 x Bolt dia, o.k.
>=2 x Bolt dia, o.k.
>=2 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.

*tf*pbs.f*f, dbolt*tw*pbs.b)
olt

Fsmv)2 + Fsmh2)0.5

VALID DESIGN

torsional buckling check of fin plate required

 CHODAI - BURO ENGINEERING PTE. LTD.

Plain Shear Pv = 103.95 kN

Block Shear Pr = 255.75 kN

hear criteria

VALID DESIGN

VALID DESIGN

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT EW3 -KALLANG BUILDING
NUMBER A1601-02231-2012-ST74
Design Information Material properties
Supporting beam = UB 305X165X52 kg/m
Depth D = 317.50 mm
Width b = 166.60 mm
Flange thickness,
tf = 13.20 mm
Web thickness
tw = 7.60 mm Bolt details
Depth between flanges
d = 275.90 mm
End/Fin Plate details
Supported beam = PFC-250X90X35.5 kg/m Steel grade
Depth D = 250.00 mm Yield stress
Width b = 90.00 mm Thickeness
Flange thickness, Width
tf = 15.00 mm Depth
Web thickness Tensile stress
tw = 8.00 mm
Depth between flanges Bearing stress
d = 220.00 mm
Design forces
Maximum shear force
Vu = 20.00 kN

Connection design check

CHODAI - BURO ENGINEERING PTE. LTD.
Check 1 Detailing check
Edge distance from the end plate a = 60.00 mm
Length of the fin plate lpfin = 200.00 mm
Thickness of fin plate tpfin = 10.00 mm
Bolt edge distances e1 = 40.00 mm
e2 = 60.00 mm
Bolt pitch vertical p = 60.00 mm
horizontal gb = 0.00 mm
Check 2 Supported beam Bolt group check
Bearing capacity per bolt Pbs = min(dbolt*tf*pbs.f*f, dbolt*tw*pbs.b)
Bearing capacity of fin plate Pbs.f = 92.00 kN
Bearing capacity of supported beam web Pbs.b = 73.60 kN
Bearing capacity per bolt Pbs = 73.60 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = ((Fsv + Fsmv)2 + Fsmh2)0.5
Vertical force on the bolt due to moment Fsv = Vu/2n
Number of bolt rows n = 3 nos
Fsv = 3.3 kN
Centre of gravity of the bolt group
x-axis location = 60.0 mm
y-axis location = 0.0 mm
Moment on the bolt group due to eccentricity
M = Vu*(a+y)
M = 1.20 kNm
Inertia of bolt group Ibg = 7200 sq.mm
Vertical force on the outermost bolt due to moment
Fsmv = 0.00 kN
Horizontal force on the outermost bolt due to moment
Fsmh = 10.00 kN
Fs = 10.54 kN
Check 3 Supported beam - Shear and bending interaction check
Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional buckling check no
i) Shear check
Effective Area of fin plate Av = 1800 sq.mm
Net Area of fin plate Av.net = 1140 sq.mm
0.6*py*Av = 297.00 kN
CHODAI - BURO ENGINEERING PTE. LTD.
0.7*py*Ke*Av.net = 263.34 kN
Effective length for block shear
Lv = 160.00 mm
Shear force of Fin plate Pvmin = 263.34 kN
ii) Shear & Bending check
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 1.20 kNm
Moment capcity of the fin plate
Mc = 18.33 kNm
Check 4 Supporting beam - Shear and bending capacity at the connection
Shear & bending capacity of the supported beam
i) Shear check
Effective Area of web Av = 1520 sq.mm
Net Area of web Av.net = 1018 sq.mm
0.6*py*Av = 250.80 kN
0.7*py*Ke*Av.net = 235.25 kN
Shear capacity of supporting beam Pvmin = 235.25 kN
Check 5 Weld capacity check
Weld thickness used = 6.00 mm
Weld capacity check = 0.92 kN/mm
Weld length = 551.80 mm
Overall weld capacity = 509.86 kN
Check 6 Simple bolt capacity check
Shear capacity of one bolt Vbolt.cap = 91.9 kN
No. of bolts required Nosreq =0
No. of bolts provided Nosprov =3
Check 7 Supporting beam Local capacity check
Local shear capacity of supporting beam
Av = 1368 sq.mm
Pv = 225.72 kN
Punching shear capacity, conservative check VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 02-08-2016
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN
l properties
Steel grade pyb = 275 MPa
Yield stress pyb = 275 MPa
Tensile stress
pub = 413 MPa
Bearing stress
pbs = 460 MPa

Bolt dia dbolt = 20.00 mm

Hole dia dhole = 22.00 mm
Plate details
pyb = 275 MPa
pyb = 275 MPa
tep = 10.00 mm
Wep = 100.00 mm
lep = 200.00 mm

pub = 413 MPa

pbs = 460 MPa

 CHODAI - BURO ENGINEERING PTE. LTD.

>=2 x Bolt dia, o.k.

>=0.6D, o.k.
> 0.5 x Bolt dia, o.k.
>=2 x Bolt dia, o.k.
>=2 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.
< 2 x Bolt dia, Not o.k.

*tf*pbs.f*f, dbolt*tw*pbs.b)
olt

Fsmv)2 + Fsmh2)0.5

VALID DESIGN

torsional buckling check not required

 CHODAI - BURO ENGINEERING PTE. LTD.

Plain Shear Pv = 263.34 kN

Block Shear Pr = 273.90 kN

hear criteria

VALID DESIGN

VALID DESIGN

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT EW3 -KALLANG BUILDING
NUMBER A1601-02231-2012-ST74
Design Information Material properties
Supporting beam = UB 254x146x37 kg/m
Depth D = 256.00 mm
Width b = 146.40 mm
Flange thickness,
tf = 10.90 mm
Web thickness
tw = 6.30 mm Bolt details
Depth between flanges
d = 219.00 mm
End/Fin Plate details
Supported beam = PFC-150X75X18 kg/m Steel grade
Depth D = 150.00 mm Yield stress
Width b = 75.00 mm Thickeness
Flange thickness, Width
tf = 10.00 mm Depth
Web thickness Tensile stress
tw = 5.50 mm
Depth between flanges Bearing stress
d = 106.00 mm
Design forces
Maximum shear force
Vu = 20.00 kN

Connection design check

CHODAI - BURO ENGINEERING PTE. LTD.
Check 1 Detailing check
Edge distance from the end plate a = 50.00 mm
Length of the fin plate lpfin = 110.00 mm
Thickness of fin plate tpfin = 10.00 mm
Bolt edge distances e1 = 30.00 mm
e2 = 30.00 mm
Bolt pitch vertical p = 60.00 mm
horizontal gb = 0.00 mm
Check 2 Supported beam Bolt group check
Bearing capacity per bolt Pbs = min(dbolt*tf*pbs.f*f, dbolt*tw*pbs.b)
Bearing capacity of fin plate Pbs.f = 92.00 kN
Bearing capacity of supported beam web Pbs.b = 50.60 kN
Bearing capacity per bolt Pbs = 50.60 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = ((Fsv + Fsmv)2 + Fsmh2)0.5
Vertical force on the bolt due to moment Fsv = Vu/2n
Number of bolt rows n = 2 nos
Fsv = 5.0 kN
Centre of gravity of the bolt group
x-axis location = 30.0 mm
y-axis location = 0.0 mm
Moment on the bolt group due to eccentricity
M = Vu*(a+y)
M = 1.00 kNm
Inertia of bolt group Ibg = 1800 sq.mm
Vertical force on the outermost bolt due to moment
Fsmv = 0.00 kN
Horizontal force on the outermost bolt due to moment
Fsmh = 16.67 kN
Fs = 17.40 kN
Check 3 Supported beam - Shear and bending interaction check
Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional buckling check no
i) Shear check
Effective Area of fin plate Av = 1080 sq.mm
Net Area of fin plate Av.net = 640 sq.mm
0.6*py*Av = 178.20 kN
CHODAI - BURO ENGINEERING PTE. LTD.
0.7*py*Ke*Av.net = 147.84 kN
Effective length for block shear
Lv = 90.00 mm
Shear force of Fin plate Pvmin = 99.00 kN
ii) Shear & Bending check
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 1.00 kNm
Moment capcity of the fin plate
Mc = 6.60 kNm
Check 4 Supporting beam - Shear and bending capacity at the connection
Shear & bending capacity of the supported beam
i) Shear check
Effective Area of web Av = 756 sq.mm
Net Area of web Av.net = 479 sq.mm
0.6*py*Av = 124.74 kN
0.7*py*Ke*Av.net = 110.60 kN
Shear capacity of supporting beam Pvmin = 110.60 kN
Check 5 Weld capacity check
Weld thickness used = 6.00 mm
Weld capacity check = 0.92 kN/mm
Weld length = 438.00 mm
Overall weld capacity = 404.71 kN
Check 6 Simple bolt capacity check
Shear capacity of one bolt Vbolt.cap = 91.9 kN
No. of bolts required Nosreq =0
No. of bolts provided Nosprov =2
Check 7 Supporting beam Local capacity check
Local shear capacity of supporting beam
Av = 624 sq.mm
Pv = 102.91 kN
Punching shear capacity, conservative check VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 02-08-2016
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN
l properties
Steel grade pyb = 275 MPa
Yield stress pyb = 275 MPa
Tensile stress
pub = 413 MPa
Bearing stress
pbs = 460 MPa

Bolt dia dbolt = 20.00 mm

Hole dia dhole = 22.00 mm
Plate details
pyb = 275 MPa
pyb = 275 MPa
tep = 10.00 mm
Wep = 80.00 mm
lep = 110.00 mm

pub = 413 MPa

pbs = 460 MPa

 CHODAI - BURO ENGINEERING PTE. LTD.

>=2 x Bolt dia, o.k.

>=0.6D, o.k.
> 0.5 x Bolt dia, o.k.
>=1.25 x Bolt dia, o.k.
>=1.25 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.
< 2 x Bolt dia, Not o.k.

*tf*pbs.f*f, dbolt*tw*pbs.b)
olt

Fsmv)2 + Fsmh2)0.5

VALID DESIGN

torsional buckling check not required

 CHODAI - BURO ENGINEERING PTE. LTD.

Plain Shear Pv = 147.84 kN

Block Shear Pr = 99.00 kN

hear criteria

VALID DESIGN

VALID DESIGN

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT BENOI FIT OUT
NUMBER A995-01415-2013-ST07 (AMENDMENT TO ST03)
Design Information Material properties
Supporting beam = UB 406x260x115 kg/m
Depth D = 419.60 mm
Width b = 261.50 mm
Flange thickness,
tf = 19.30 mm
Web thickness
tw = 11.60 mm Bolt details
Depth between flanges
d = 360.60 mm
End/Fin Plate details
Supported beam = UB 203X133X25 kg/m Steel grade
Depth D = 203.20 mm Yield stress
Width b = 133.20 mm Thickeness
Flange thickness, Width
tf = 7.80 mm Depth
Web thickness Tensile stress
tw = 5.70 mm
Depth between flanges Bearing stress
d = 172.40 mm
Design forces
Maximum shear force
Vu = 54.00 kN

Connection design check

CHODAI - BURO ENGINEERING PTE. LTD.
Check 1 Detailing check
Edge distance from the end plate a = 39.00 mm
Length of the fin plate lpfin = 155.00 mm
Thickness of fin plate tpfin = 12.00 mm
Bolt edge distances e1 = 35.00 mm
e2 = 31.00 mm
Bolt pitch vertical p = 85.00 mm
horizontal gb = 0.00 mm
Check 2 Supported beam Bolt group check
Bearing capacity per bolt Pbs = min(dbolt*tf*pbs.f*f, dbolt*tw*pbs.b)
Bearing capacity of fin plate Pbs.f = 88.32 kN
Bearing capacity of supported beam web Pbs.b = 41.95 kN
Bearing capacity per bolt Pbs = 41.95 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = ((Fsv + Fsmv)2 + Fsmh2)0.5
Vertical force on the bolt due to moment Fsv = Vu/2n
Number of bolt rows n = 2 nos
Fsv = 13.5 kN
Centre of gravity of the bolt group
x-axis location = 42.5 mm
y-axis location = 0.0 mm
Moment on the bolt group due to eccentricity
M = Vu*(a+y)
M = 2.11 kNm
Inertia of bolt group Ibg = 3613 sq.mm
Vertical force on the outermost bolt due to moment
Fsmv = 0.00 kN
Horizontal force on the outermost bolt due to moment
Fsmh = 24.78 kN
Fs = 28.22 kN
Check 3 Supported beam - Shear and bending interaction check
Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional buckling check no
i) Shear check
Effective Area of fin plate Av = 1674 sq.mm
Net Area of fin plate Av.net = 1242 sq.mm
0.6*py*Av = 356.56 kN
CHODAI - BURO ENGINEERING PTE. LTD.
0.7*py*Ke*Av.net = 339.50 kN
Effective length for block shear
Lv = 120.00 mm
Shear force of Fin plate Pvmin = 267.36 kN
ii) Shear & Bending check
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 2.11 kNm
Moment capcity of the fin plate
Mc = 17.06 kNm
Check 4 Supporting beam - Shear and bending capacity at the connection
Shear & bending capacity of the supported beam
i) Shear check
Effective Area of web Av = 1798 sq.mm
Net Area of web Av.net = 1380 sq.mm
0.6*py*Av = 382.97 kN
0.7*py*Ke*Av.net = 377.33 kN
Shear capacity of supporting beam Pvmin = 377.33 kN
Check 5 Weld capacity check
Weld thickness used = 10.00 mm
Weld capacity check = 1.54 kN/mm
Weld length = 721.20 mm
Overall weld capacity = 1110.65 kN
Check 6 Simple bolt capacity check
Shear capacity of one bolt Vbolt.cap = 58.9 kN
No. of bolts required Nosreq =1
No. of bolts provided Nosprov =2
Check 7 Supporting beam Local capacity check
Local shear capacity of supporting beam
Av = 1618 sq.mm
Pv = 344.68 kN
Punching shear capacity, conservative check VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 06-12-2017
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN
l properties
Steel grade pyb = 355 MPa
Yield stress pyb = 355 MPa
Tensile stress
pub = 470 MPa
Bearing stress
pbs = 460 MPa

Bolt dia dbolt = 16.00 mm

Hole dia dhole = 18.00 mm
Plate details
pyb = 355 MPa
pyb = 355 MPa
tep = 12.00 mm
Wep = 85.00 mm
lep = 155.00 mm

pub = 470 MPa

pbs = 460 MPa

 CHODAI - BURO ENGINEERING PTE. LTD.

>=2 x Bolt dia, o.k.

>=0.6D, o.k.
>=0.42 x Bolt dia, o.k.
>=1.25 x Bolt dia, o.k.
>=1.25 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.
< 2 x Bolt dia, Not o.k.

*tf*pbs.f*f, dbolt*tw*pbs.b)
olt

Fsmv)2 + Fsmh2)0.5

VALID DESIGN

torsional buckling check not required

 CHODAI - BURO ENGINEERING PTE. LTD.

Plain Shear Pv = 339.50 kN

Block Shear Pr = 267.36 kN

hear criteria

VALID DESIGN

VALID DESIGN

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT BENOI FIT OUT
NUMBER A995-01415-2013-ST07 (AMENDMENT TO ST03)
Design Information Material properties
Supporting beam = UB 406x260x115 kg/m
Depth D = 419.60 mm
Width b = 261.50 mm
Flange thickness,
tf = 19.30 mm
Web thickness
tw = 11.60 mm Bolt details
Depth between flanges
d = 360.60 mm
End/Fin Plate details
Supported beam = UB 406x260x115 kg/m Steel grade
Depth D = 419.60 mm Yield stress
Width b = 261.50 mm Thickeness
Flange thickness, Width
tf = 19.30 mm Depth
Web thickness Tensile stress
tw = 11.60 mm
Depth between flanges Bearing stress
d = 360.60 mm
Design forces
Maximum shear force
Vu = 120.00 kN

Connection design check

CHODAI - BURO ENGINEERING PTE. LTD.
Check 1 Detailing check
Edge distance from the end plate a = 50.00 mm
Length of the fin plate lpfin = 335.00 mm
Thickness of fin plate tpfin = 16.00 mm
Bolt edge distances e1 = 50.00 mm
e2 = 40.00 mm
Bolt pitch vertical p = 85.00 mm
horizontal gb = 0.00 mm
Check 2 Supported beam Bolt group check
Bearing capacity per bolt Pbs = min(dbolt*tf*pbs.f*f, dbolt*tw*pbs.b)
Bearing capacity of fin plate Pbs.f = 147.20 kN
Bearing capacity of supported beam web Pbs.b = 106.72 kN
Bearing capacity per bolt Pbs = 106.72 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = ((Fsv + Fsmv)2 + Fsmh2)0.5
Vertical force on the bolt due to moment Fsv = Vu/2n
Number of bolt rows n = 4 nos
Fsv = 15.0 kN
Centre of gravity of the bolt group
x-axis location = 127.5 mm
y-axis location = 0.0 mm
Moment on the bolt group due to eccentricity
M = Vu*(a+y)
M = 6.00 kNm
Inertia of bolt group Ibg = 36125 sq.mm
Vertical force on the outermost bolt due to moment
Fsmv = 0.00 kN
Horizontal force on the outermost bolt due to moment
Fsmh = 21.18 kN
Fs = 25.95 kN
Check 3 Supported beam - Shear and bending interaction check
Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional buckling check no
i) Shear check
Effective Area of fin plate Av = 5112 sq.mm
Net Area of fin plate Av.net = 3704 sq.mm
0.6*py*Av = 1088.86 kN
CHODAI - BURO ENGINEERING PTE. LTD.
0.7*py*Ke*Av.net = 1012.49 kN
Effective length for block shear
Lv = 305.00 mm
Shear force of Fin plate Pvmin = 983.21 kN
ii) Shear & Bending check
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 6.00 kNm
Moment capcity of the fin plate
Mc = 119.30 kNm
Check 4 Supporting beam - Shear and bending capacity at the connection
Shear & bending capacity of the supported beam
i) Shear check
Effective Area of web Av = 4118 sq.mm
Net Area of web Av.net = 3097 sq.mm
0.6*py*Av = 877.13 kN
0.7*py*Ke*Av.net = 846.62 kN
Shear capacity of supporting beam Pvmin = 846.62 kN
Check 5 Weld capacity check
Weld thickness used = 12.00 mm
Weld capacity check = 1.85 kN/mm
Weld length = 721.20 mm
Overall weld capacity = 1334.22 kN
Check 6 Simple bolt capacity check
Shear capacity of one bolt Vbolt.cap = 91.9 kN
No. of bolts required Nosreq = 1.306
No. of bolts provided Nosprov =4
Check 7 Supporting beam Local capacity check
Local shear capacity of supporting beam
Av = 3497 sq.mm
Pv = 744.95 kN
Punching shear capacity, conservative check VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 06-12-2017
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN
l properties
Steel grade pyb = 355 MPa
Yield stress pyb = 355 MPa
Tensile stress
pub = 470 MPa
Bearing stress
pbs = 460 MPa

Bolt dia dbolt = 20.00 mm

Hole dia dhole = 22.00 mm
Plate details
pyb = 355 MPa
pyb = 355 MPa
tep = 16.00 mm
Wep = 115.00 mm
lep = 335.00 mm

pub = 470 MPa

pbs = 460 MPa

 CHODAI - BURO ENGINEERING PTE. LTD.

>=2 x Bolt dia, o.k.

>=0.6D, o.k.
>=0.42 x Bolt dia, o.k.
>=1.25 x Bolt dia, o.k.
>=1.25 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.
< 2 x Bolt dia, Not o.k.

*tf*pbs.f*f, dbolt*tw*pbs.b)
olt

Fsmv)2 + Fsmh2)0.5

VALID DESIGN

torsional buckling check not required

 CHODAI - BURO ENGINEERING PTE. LTD.

Plain Shear Pv = 1012.49 kN

Block Shear Pr = 983.21 kN

hear criteria

VALID DESIGN

VALID DESIGN

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.

EXTENDED FIN PLATE CONNECTION

PROJECT BENOI FIT OUT
NUMBER A995-01415-2013-ST07 (AMENDMENT TO ST03)
Design Information Material properties
Supporting beam = UB 203X133X25 kg/m
Depth D = 203.20 mm
Width b = 133.20 mm
Flange thickness,
tf = 7.80 mm
Web thickness
tw = 5.70 mm Bolt details
Depth between flanges
d = 172.40 mm
End/Fin Plate details
Supported beam = UB 203X133X25 kg/m Steel grade
Depth D = 203.20 mm Yield stress
Width b = 133.20 mm Thickeness
Flange thickness, Width
tf = 7.80 mm Depth
Web thickness Tensile stress
tw = 5.70 mm
Depth between flanges Bearing stress
d = 172.40 mm
Design forces
Maximum shear force
Vu = 25.00 kN

Connection design check

CHODAI - BURO ENGINEERING PTE. LTD.
Check 1 Detailing check
Edge distance from the end plate a = 39.00 mm
Length of the fin plate lpfin = 165.00 mm
Thickness of fin plate tpfin = 12.00 mm
Bolt edge distances e1 = 40.00 mm
e2 = 31.00 mm
Bolt pitch vertical p = 85.00 mm
horizontal gb = 0.00 mm
Check 2 Supported beam Bolt group check
Bearing capacity per bolt Pbs = min(dbolt*tf*pbs.f*f, dbolt*tw*pbs.b)
Bearing capacity of fin plate Pbs.f = 88.32 kN
Bearing capacity of supported beam web Pbs.b = 41.95 kN
Bearing capacity per bolt Pbs = 41.95 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = ((Fsv + Fsmv)2 + Fsmh2)0.5
Vertical force on the bolt due to moment Fsv = Vu/2n
Number of bolt rows n = 2 nos
Fsv = 6.3 kN
Centre of gravity of the bolt group
x-axis location = 42.5 mm
y-axis location = 0.0 mm
Moment on the bolt group due to eccentricity
M = Vu*(a+y)
M = 0.98 kNm
Inertia of bolt group Ibg = 3613 sq.mm
Vertical force on the outermost bolt due to moment
Fsmv = 0.00 kN
Horizontal force on the outermost bolt due to moment
Fsmh = 11.47 kN
Fs = 13.06 kN
Check 3 Supported beam - Shear and bending interaction check
Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional buckling check no
i) Shear check
Effective Area of fin plate Av = 1782 sq.mm
Net Area of fin plate Av.net = 1350 sq.mm
0.6*py*Av = 379.57 kN
CHODAI - BURO ENGINEERING PTE. LTD.
0.7*py*Ke*Av.net = 369.02 kN
Effective length for block shear
Lv = 125.00 mm
Shear force of Fin plate Pvmin = 280.14 kN
ii) Shear & Bending check
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 0.98 kNm
Moment capcity of the fin plate
Mc = 19.33 kNm
Check 4 Supporting beam - Shear and bending capacity at the connection
Shear & bending capacity of the supported beam
i) Shear check
Effective Area of web Av = 941 sq.mm
Net Area of web Av.net = 735 sq.mm
0.6*py*Av = 200.33 kN
0.7*py*Ke*Av.net = 200.99 kN
Shear capacity of supporting beam Pvmin = 200.33 kN
Check 5 Weld capacity check
Weld thickness used = 10.00 mm
Weld capacity check = 1.54 kN/mm
Weld length = 344.80 mm
Overall weld capacity = 530.99 kN
Check 6 Simple bolt capacity check
Shear capacity of one bolt Vbolt.cap = 58.9 kN
No. of bolts required Nosreq = 0.424
No. of bolts provided Nosprov =2
Check 7 Supporting beam Local capacity check
Local shear capacity of supporting beam
Av = 846 sq.mm
Pv = 180.29 kN
Punching shear capacity, conservative check VALID DESIGN
 CHODAI - BURO ENGINEERING PTE. LTD.

Date 06-12-2017
Prepared I.HARI AMUDHAN
Checked Dr.K.MURUGAPPAN
l properties
Steel grade pyb = 355 MPa
Yield stress pyb = 355 MPa
Tensile stress
pub = 470 MPa
Bearing stress
pbs = 460 MPa

Bolt dia dbolt = 16.00 mm

Hole dia dhole = 18.00 mm
Plate details
pyb = 355 MPa
pyb = 355 MPa
tep = 12.00 mm
Wep = 70.00 mm
lep = 165.00 mm

pub = 470 MPa

pbs = 460 MPa

 CHODAI - BURO ENGINEERING PTE. LTD.

>=2 x Bolt dia, o.k.

>=0.6D, o.k.
>=0.42 x Bolt dia, o.k.
>=1.25 x Bolt dia, o.k.
>=1.25 x Bolt dia, o.k.
>=2.5 x Bolt dia, o.k.
< 2 x Bolt dia, Not o.k.

*tf*pbs.f*f, dbolt*tw*pbs.b)
olt

Fsmv)2 + Fsmh2)0.5

VALID DESIGN

torsional buckling check not required

 CHODAI - BURO ENGINEERING PTE. LTD.

Plain Shear Pv = 369.02 kN

Block Shear Pr = 280.14 kN

hear criteria

VALID DESIGN

VALID DESIGN

VALID DESIGN

VALID DESIGN
CHODAI - BURO ENGINEERING PTE. LTD.

UN-NOTCHED FIN PLATE CONNECTION CHECK (SINGLE LINE OF BOLTS) Date 15-10-2015
PROJECT ST425 - NBV SHAFT STEEL FRAMING PLAN Prepared I.HARI AMUDHAN
NUMBER Checked Dr.K.MURUGAPPAN
CONNECTION SECTION X5 (BEAM B8 TOP B8) DWG NO 00198-EW1-OC-SH-NBV-CI-DAL-6821
Beam Mark Main Beam = UB-457X191X89.3 kg/m Sec. Beam = C-125X65X13.4 kg/m
Design Information
Secondary beam details Main beam details
Section = C-125X65X13.4 kg/m Section = UB-457X191X89.3 kg/m
Flange width, bf = 65.00 mm Flange width, bf = 191.90 mm
Flange thickness, Flange thickness,
tf = 8.00 mm tf = 17.70 mm
Section depth, D = 125.00 mm Section depth D = 463.40 mm
Depth between flanges, Depth between flanges,
d = 109.00 mm d = 428.00 mm
Web thickness, Web thickness,
tw = 6.00 mm tw = 10.50 mm
Material properties
Steel sections - Main beam
Yield stress pyb = 275 MPa Bearing Stress pbs = 460 MPa
Tensile stress pub = 410 MPa
Steel sections - Secondary beam
Yield stress pyb = 275 MPa Bearing Stress pbs = 460 MPa
Tensile stress pub = 410 MPa
Plates
Yield stress pyf = 275 MPa Bearing Stress pbs = 460 MPa
Tensile stress puf = 410 MPa
Bolt grade = M4.6 Bolt hole type = Slotted (Refer section 6.3.3 of BS5950-1:2000)
Bolt diameter db = 12 mm Bolt hole diameter dbh = 14 mm

Design Forces
Max. Shear Force Max. Shear forces Vu1/Fv1 = 11.00 kN
Vu/Fv = 11.00 kN Vu2/Fv2 = 0.00 kN
* Fv - consider the maximum shear force and the respective sections for the design, if connected on both sides.
Connection Check
Check 1 Detailig check
End distance from main beam, a = 41 mm >2 x bolt dia, Hence o.k
Edge distance from bolt,e1/et = 25 mm >1.25 x bolt dia, Hence o.k
Edge distance from bolt, eb = 30 mm >1.25 x bolt dia, Hence o.k
Edge distance from bolt, e2/eh = 45 mm >1.25 x bolt dia, Hence o.k
Length of fin plate, lf = 265 mm >0.6D, Hence o.k
** Fin plate length of the side considered only to be entered.
Thickness of fin Plate = 10 mm >=0.5*Bolt dia,Hence o.k.
Gap bet Main beam & Sec. beam,t1 = 10 mm
Bolt pitch = 40 mm >2.5*Bolt dia, Hence o.k
Check 2 Secondary beam - Bolt group check
Bearing capacity per bolt Pbs = Min(Fin plate bearing capacity, Web bearing capacity)

75
CHODAI - BURO ENGINEERING PTE. LTD.

Co-effiecient kbs = 0.5 ( Co-efficent based on bearing based on BS 5950-1:2000,cl.6.3.3.3)

76
CHODAI - BURO ENGINEERING PTE. LTD.
Fin plate bearing capacity = 47.2 kN
Web bearing capacity = 16.6 kN
Bearing capacity per bolt Pbs = 16.6 kN
Nos of bolt rows n = 2 nos
Vertical force on bolt due to vertical shear
Fsv = 5.5 kN
Force on the outermost bolt due to moment
Fsm = 11.3 kN
Resultant force on outermost bolt due to direct shear and moment
Fs = 12.5 kN <=Pbs, Hence o.k
Basic shear capacity check
Shear capacity of one bolt = 13.5 kN
No. of bolts required = 0.8 nos
No of bolts provided = 2 nos No. of bolts provided is o.k.

Check 3 Shear & bending capacity of fin plate connected to supported beam
Check for long fin plate a > tf/0.15 = Lateral torsional check for long fin plate not required
i) Shear check
Effective Area of fin plate Av = 810 sq.mm
Net Area of fin plate Av.net = 530 sq.mm
0.6*py*Av = 133.7 kN
0.7*py*Ke*Av.net = 122.4 kN Plain Shear Pv = 122.4 kN
Effective length for block shear
Lv = 65 mm Block Shear Pr = 177.7 kN
Shear force of Fin plate Pvmin = 122.4 kN >Max. Shear force, Hence o.k
ii) Shear & Bending information
Check for low shear Vu<=0.75*Pvmin = Low shear criteria
Moment due to shear force Vu*a = 0.45 kNm
Moment capcity of the fin plate
Mc = 3.71 kNm >Moment due to Shear force, Hence o.k
Check 4 Shear and bending capacity at notch - for single line of bolts only
Type of notch =1 1 - One flange notched
Notch length from the edge of the beam 2 - Two flange notched
c = 87 mm
Max. design check moment
Vu*(t1+c) = 1.07 kNm
Shear capacity at notch PvN = 84.6 kN
Shear criteria, Vu<=0.75PvN / Vu<=0.75PvN = Low shear criteria
Moment capacity at notch
McN = 2.48 kNm >Max. design moment, Hence o.k
Check 5 Supported beam - Local stability of restrained notched beam 1 - One flange notched
* If secondary beam/supported beam is unrestrained against lateral torsional buckling, the overall stability
of the beam should be checked.
Type of notch =1 2 - Two flange notched
Depth of notch cut, dc1 = 26 mm
Depth of notch cut, dc2 = 0 mm <D/2,Hence o.k.
Length of the notch cut, c1 = 87 mm
Length of the notch cut, c2 = 0 mm Max(c1,c2) = 87 mm
D/tw ratio = 20.8
160000D/(D/tw)^3 =0 <req.condtions, Hence o.k.
Check 6 Shear & bending capacity of the supported beam
Check for long fin plate a > tf/0.15 = Shear & bending interaction of beam web section not required
Shear check
Effective Area of fin plate Av = 998 sq.mm
Net Area of fin plate Av.net = 704 sq.mm
0.6*py*Av = 164.6 kN
0.7*py*Ke*Av.net = 162.5 kN
Shear capacity of the beam at connection
Pvmin = 162.5 kN

77
CHODAI - BURO ENGINEERING PTE. LTD.
Check 7 Supporting beam weld check
Weld thickness s = 6 mm
Conservative check 0.8*t f = 8 mm Not o.k.
* if not o.k, the strength of the weld provided is checked to resist the design forces
Strength of weld used = 275 MPa
Longitudinal strength of the weld = 0.924 kN/mm
Overall weld length = 530 mm
Weld capacity = 490 kN Max.S.F.<0.5*Weld cap., Hence o.k
Check 8 Supporting beam/column - Local capacity
i) Local shear capacity
Shear capacity of main beam's web, Pv
If main beam supports only one beam
0.6*py*0.9*lf*tw = 413.20 kN >Max.Shear force, Hence o.k.
ii) Punching Shear check
Max. bending stress in fin plate,fb = 3.85 MPa
fb = (Fv/Vu*a*6)/(tf*l2) <=pyf
tf<=tw*(pub/fb) = Punching shear capacity of main beam is o.k.

78