Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
44 views

Crack Width Check Project Date Prepared by Checked by Material Properties

This document summarizes the crack width check calculations for a beam/slab section with a service moment of 40 kNm. It lists the material properties, section properties, calculations of the neutral axis, steel and concrete strains, and maximum predicted crack width of 0.0957847 mm, which is less than the limiting value of 0.2 mm. Therefore, the crack width check indicates the design is acceptable.

Uploaded by

hary9100
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
44 views

Crack Width Check Project Date Prepared by Checked by Material Properties

This document summarizes the crack width check calculations for a beam/slab section with a service moment of 40 kNm. It lists the material properties, section properties, calculations of the neutral axis, steel and concrete strains, and maximum predicted crack width of 0.0957847 mm, which is less than the limiting value of 0.2 mm. Therefore, the crack width check indicates the design is acceptable.

Uploaded by

hary9100
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

CRACK WIDTH CHECK

PROJECT
DATE
PREPARED BY
CHECKED BY
* ALL SECTIONS ARE CHECKED WITHOUT THE AXIAL FORCE ITSELF
Material properties
Conc. Strength, fc = 60 N/mm2
Re-bar steel strength, fs = 460 N/mm2
Concrete modulus,Ec = 16 kN/mm2
Re-bar steel modulus.Es = 200 kN/mm2

Beam/ Slab Section properties


Breadth,b = 1400 mm
Depth,D = 300 mm
Effective depth,d = 250 mm
Clear cover,cmin = 50 mm
Dia of the Tension Re-bars = 13 mm
No of bars provided = 8 NOS
Tension Reinf. Provided = 1061.8608 mm2
Spacing of the Tension re-bars = 250 mm

Service moment = 40 kNm

Calculations
Modular ratio, e = 25
b/2 = 700 mm
e * As = 26546.52 mm2
- e * As * d = -6636630 mm3
Neutral axis,x (FROM TOP) = 81 mm
x/d ratio = 0.324
k = 0.0114286
z = 246.78403 mm

Avg stress @ Tension reinf. = 152.64246 N/mm2


= STEEL STRESS IS O.K.
Strain @ tension reinf, s = 0.0007632
Strain @ bottom ext. fibre, h = 0.000989
Avg strain @ level considered, mh = 0.0003654

Maximum crack width calculation @ midway between bars


am = 235 mm
maximum crack width, wm = 0.0957847 mm
Limiting crack width value,wlim = 0.2 mm
CRACK WIDTH CHECK IS O.K.

You might also like