Camera Adapter BMW Manual

m
co
BMW APIX PAS
(Rear Camera Interface)
.
ns
io
ut
ol
-S
MODEL BM-PAS-160525
ar
DATE 2016.07.30
C
support@car-solutions.com www.car-solutions.com
Main Spec.
m
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
co
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
- 1 x Analog RGB Input (Navigation System output)
.
2. Output Spec.
ns
- 1 x LVDS Output (LCD Operation)
3. Power Spec.
io
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode

ut
ol
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN
-S
ar
C
External Appearance
m
co
.
ns
io
ut
ol
-S
ar
C
Connector Pin Assignment
m
. co
ns
*POWER Connect *NAVI Connect
io
① ② ③ ④ ⑤ ⑥ ①②③④⑤⑥⑦
①
②
ACC(Yellow)
ut
REAR_POWER (Red)
①
②
R DATA (Red)
G DATA (Green)
ol
③ CAN-HIGH (Orange) ③ B DATA (Blue)
④ CAN-LOW (Green) ④ SYNC (White)
⑤ REAR-Detect(Brown) ⑤ GND (Black)
-S
⑥ GND (Black) ⑥ DVB-T IR(Green)
⑦ DVD IR(Orange)
ar
C
Product Composition
m
. co
ns
io
Interface 1 EA Power Cable(5P) 1 EA LVDS Cable 1 EA
(Z(6P)-Z(6P) Type R/A)
ut
ol
-S
ar
RGB NAVI(7P)Cable 1 EA Option : Plug & Play Power Cable

C
DIP S/W Setting
m
* ON : DOWN , OFF : UP * DIP S/W Example
co
PIN FUNCTION DIP S/W Selection
ON : Not Used
1 NAVI F30 6.5”
.
OFF : Used
ns
ON : Not Used
2 DVB-T(AV1)
OFF : Used
ON : Not Used F20 8.8”
io
3 DVD(AV2)
OFF : Used
ON : Not Used
4 MHL
ut
OFF : Used
F30 8.8”
5 N.C
ol
6
X3,X4 8.8” MINI 6.5”
-S
7 CAR type SEL Right Picture

ar
8
F15 10.2” MINI 8.8”
C
I-DRIVE CONTROL
m
BMW I-Drive Control : Mode Change
. co
ns
Steering wheel button -> on/off selection to OSD MENU
io
ut
8.8” 6.5”
“8” button -> on/off selection to OSD MENU

Push Long : Mode Change
ol
Push Short : Back to OEM Menu
-S
OEM NAVI DVB-T DVD

ar
C
I-DRIVE CONTROL
m
BMW I-Drive Control : Screen Size Change (PIP)
co
RearCamera Full size
.
ns
RearCamera middle size
io
6.5”
ut
8.8” RearCamera None
ol
Push Long : SIZE Change (PIP)
-S
ar
C
I-DRIVE CONTROL
m
BMW I-Drive Control : DVB-T(DTV) Control
co
- DVB-T UI off - DVB-T UI on
④ Push Short : channel Up ④ Push Short : channel Up
⑤ Push Short : channel Down ⑤ Push Short : channel Down
.
② ④ ② ⑤ Push Long : SCAN ⑤ Push Long : SCAN
ns
① ⑤ ① ④ ① Push Short : Selection
⑤ ③ ① Push Long : DVB-T UI on
③ ④ ② UI move to left
io
③ UI move to right
⑤
ut
8.8” 6.5” ol
-S
ar
C
DVB-T UI -> on/off selection to OSD MENU
I-DRIVE CONTROL
m
BMW I-Drive Control : DVD Control
co
- DVD UI on
① Push Short : Selection
① Push Long : DVB-T UI on
.
② ②
ns
② UI Move to left
① ① ③ UI Move to right
③ ③
io
ut
8.8” 6.5” ol
-S
ar
C
DVD UI -> on/off selection to OSD MENU
OSD(On Screen Display) Control
m
I-Drive Control : OSD Mode
co
OPTION Push 6sec : OSD ON
Push Short : MENU EXIT
ENTER Item Selection, Value Selection
UP Item up
.
Increase selected value
ns
RIGHT First->Second->Third Menu move
Third Menu에서 Item down
Increase selected value
io
DOWN Item down
Decrease selected value
LEFT Third->Second->First Menu move
ut
8.8” Third Menu에서 Item up
Decrease selected value
ol
Mode State
-S
ar
First Menu Second Menu

C
Third Menu
6.5”
m
First Menu Second Menu Third Menu Action
ELT-980XU SLIM LCKT SANYO NECVOX AMPIRE DVX101 PIONEER
GI4000 Selection Korea 480*234
co
GI8000 Selection Korea 800*480
GI80003G Selection Korea 800*480
PANASONIC Selection Taiwan 480*234
NAVI-RGB PT-GPS800A Selection China 480*234
.
KD900(WVGA) Selection China 800*480
ns
KD900(WQVGA) Selection China 480*234
PURENAV18 Selection Taiwan 480*234
SINGAPURA Selection Singapore 480*234
io
NAVI-AV
ELT-980XU Slim Selection Europe
LCKT Selection China

ELT-DVBT20 Pioneer Portugal GEX-DTV
ut
SANYO Selection China
DVD
NECBOX DVA-3206 Selection China
Config
AMPIRE DVX-101 Selection Singapore
Pioneer
ol
Selection Japan
ELT-DVBT20 Selection Europe
NET-770 Selection Korea

-S
MediaLife Selection Korea
Panasonic Selection Japan

DVB-T2010HD DVBT55HD CMMB-ZW TUE-T440
Pioneer Selection Japan
ar
DVB-T(DMB) GEX-DTV Selection Japan
TUE-T440 Selection Japan
Portugal Selection Europe
DVB-T20010HD Selection Europe

C
DVBT55-HD Selection Europe
CMMB-ZWa Selection China
Reset Excute Config Menu all Reset

m
OSD Control : DVB-T Model Selection
co
1. Press OPTION Button 6sec, OSD menu on. 2. Push ⑤ or ③ Move to right side menu
.
ns
①
③ ⑤ ④
②
io
3. Push ② or ② move to DVB-T(DMB) menu. 4. Push ⑤ or③ move to right side menu
ut
8.8” ol
-S
5. Push ② or ② find device, Push ⑤ or ③ to select.
① ③ ②
ar
C
6.5”
m
REAR Detect control
. co
ns
Rear detect selection to OSD MENU
io
GEAR : ‘R’ on, Enter reverse mode
‘R’ off, Release reverse mode
ut
ol
PDC : Work as OEM (same as OEM)
Button LED on, Enter reverse mode
Button LED off, Release reverse mode
-S
WIRE : Not use CAN

ar
Connect rear detect wire to REAR LIGHT (+12V )

C
m
OSD setting – Front Camera Auto Mode
co
- Option -> RearCam-RcvOpt -> On setting
.
ns
Off mode : 0 second
io
On mode : 1~30 second
ut
OEM OEM
NAVI NAVI
ol
REAR FRONT
AV1(DVB-T) AV1(DVB-T)
-S
AV2(DVD) AV2(DVD)
ar
C
Time selection : 1~30 second
m
First Menu Second Menu Third Menu Action
co
OEM Original Camera
RearCam-Type
ExtDevice Use aftermarket Rear camera
ON Rear camera get +12V consistently
.
RearCam-Power AUTO Rear camera get +12V when reverse gear on
ns
OFF Shut out the power supply.
OEM Original Camera
FrontCam-Type
Option ExtDevice Use aftermarket Front camera
io
ON Front camera get +12V consistently
FrontCam-Power AUTO Front camera get +12V when reverse gear on
OFF
ON
utShut out the power supply.
Show Frontcam 25sec after rear mode.
ol
RearCam-RcvOpt
OFF Default
Reset Excute Option Menu all Reset
-S
ar
C
m
NAVI-RGB menu DVD,DVB-T(DMB),NAVI-AV,REAR,FRONT menu
co
First Menu Second Menu Third Menu Action First Menu Second Menu Third Menu Action
Brightness Adjust the value of brightness Brightness Adjust the value of brightness
Contrast Adjust the value of contrast Contrast Adjust the value of contrast
.
Color-RED Adjust the value of RED Saturation Adjust the value of Saturation
Image Image
ns
Color-GREEN Adjust the value of GREEN Hue Adjust the value of Hue
Color-BLUE Adjust the value of BLUE Sharpness Adjust the value of Sharpness
Reset Excute Option Menu all Reset Reset Excute Option Menu all Reset
io
ut
ol
<< Brightness >> << Saturation >>
-S
ar
<< Contrast >>

C
m
OSD Setting– Screen Mode
co
- Horizontal
- Vertical
- Scaler X Up
- Scaler X Down
.
- Scaler Y Up
ns
- Scaler Y Down
io
ut
ol
-S
ar
C
Install Manual
m
1. Installation Power,CAN Connection
co
1.
Can high
.
ns
13 14 15 16
11
9 10 11 12 9
5 6 7 8
Can low
1 2 3 4
io
2.
ut
BMW APIX PAS
AV
ol
INTERFACE
RGB
-S
5. GND (Black)
4. CAN-LOW (White)
3. CAN-HIGH (Orange)
POWER/CAN
2. REAR_POWER (Red)
ar
1. BATTERY (Yellow)
C
Install Manual
m
2. Installation DVB-T Remote Control Connection
. co
BMW APIX PAS
ns
INTERFACE
RGB
① or ②
io
①
MHL
DVD IR
DVB-T IR
ut
GND
SYNC
BLUE
GREEN
POWER/CAN
RED
GEX-909DTV
ol DVB-T-IR
-S
2 ②
ar
TUE-T440
C
Install Manual
m
3. Installation DVD Remote Control Connection
. co
BMW APIX PAS
ns
INTERFACE
RGB
io
MHL
DVD IR
DVB-T IR
ut
GND
SYNC
BLUE
GREEN
POWER/CAN
RED
ol DVD-IR
-S
DHA-S690
ar
C
Install Manual
m
4. Installation External Reverse(Rear) Camera Connection : OSD Screen selection CAN
. co
ns
BMW APIX PAS
INTERFACE
io
RGB
ut
MHL
6. GND (Black)
5. REAR DETECT (Brown) REAR-POWER (Red)
ol
4. CAN-LOW (Green)
3. CAN-HIGH (Orange)
POWER/CAN
2. REAR_POWER (Red)
-S
1. BATTERY (Yellow)
ar
CAN
C
Install Manual – 8.8”
m
① ②
co
.
ns
io
③ ut
④
ol
-S
ar
C
m
⑤ ⑥
. co
ns
io
Take out OEM Power Cable
⑦ ut ⑧
ol
-S
ar
C
Move MOST Cable to Our connector

m
⑨ ⑩
co
.
ns
io
ut
ol
-S
ar
C
m
① ②
. co
ns
io
③ ut
④
ol
-S
ar
C
support@car-solutions.com
Take out OEM Power Cable
www.car-solutions.com
Install Manual – 6.5
m
⑤ ⑥
co
.
ns
io
⑦ ut
ol
-S
ar
C
Q & A
m
1. If Interface has a problem, Please check LED.
- ACC on (12v), If Interface does not have a problem; GREEN LED is blinking every 1 sec..
co
- RED LED is turn on (not blinking), Interface has a problem.
- - RED LED is turn off every 1 sec, there is no input.
- - RED LED and GREEN LED both are not turn on, check the CAN or ACC connection.
.
2. Q : LCD screen black
A : LVDS Cable problem or, connection problem.
ns
3. When DTV or DVD mode, cannot control with I-Drive
- Check IR cable, and DTV or DVD device’s ground cable and Interface ground cable join together with
using extra cable.
io
- Check device in OSD menu
ut
ol
-S
ar
C
Q & A (HDMI TO RGB)
m
4. HDMI to RGB Audio connection
. co
ns
Yeonho
SMH200-10
io
Yeonho
YDH200-10
EXTEND (Mesh)
10 GND 10 10 GND
ut
GND 9 9 GND
AUDIO-R 8 8 AUDIO-R
5V 7 7 5V
9
AUDIO-L 6
ol 6 AUDIO-L
RED 5 5 RED 10
GND 4 4 GND 1
GREEN 3 3 GREEN
-S
SYNC 2 2 SYNC 2
1 BLUE 1 1 BLUE
LVDS shrinkable tube
ar
500 mm
C

Camera Adapter BMW Manual

Uploaded by

Copyright:

Available Formats

Camera Adapter BMW Manual

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Camera Adapter BMW Manual

Uploaded by

Copyright:

Available Formats

m

4. Switch Input mode

RGB NAVI(7P)Cable 1 EA Option : Plug & Play Power Cable

7 CAR type SEL Right Picture

“8” button -> on/off selection to OSD MENU

OEM NAVI DVB-T DVD

DVB-T UI -> on/off selection to OSD MENU

DVD UI -> on/off selection to OSD MENU

First Menu Second Menu

GI80003G Selection Korea 800*480

PANASONIC Selection Taiwan 480*234

NAVI-RGB PT-GPS800A Selection China 480*234

PURENAV18 Selection Taiwan 480*234

SINGAPURA Selection Singapore 480*234

ELT-980XU Slim Selection Europe

LCKT Selection China

ELT-DVBT20 Selection Europe

NET-770 Selection Korea

Panasonic Selection Japan

DVB-T(DMB) GEX-DTV Selection Japan

TUE-T440 Selection Japan

Portugal Selection Europe

DVB-T20010HD Selection Europe

DVBT55-HD Selection Europe

CMMB-ZWa Selection China

Reset Excute Config Menu all Reset

WIRE : Not use CAN

Connect rear detect wire to REAR LIGHT (+12V )

Time selection : 1~30 second

<< Contrast >>

Move MOST Cable to Our connector

You might also like