Foreword

Dear Customer,
Congratulations on becoming the proud owner of a “Avenger 220 DTS-i” motorcycle, one of the
finest motorcycles in the country.
Your safety and the safety of others is extremely important. Hence, before you ride the bike,
please read this Owner's Manual carefully and familiarize yourself with the operating mechanism,
controls and maintenance requirements. This will ensure you a long and trouble free ownership
experience.
To keep your bike in perfect running condition and ensure consistent performance, we have
specially programmed the periodic maintenance services which includes 3 Free and subsequent
Paid services.
We earnestly advise you to avail all these services at any of our Vehicle Dealers or Authorised
Service Centers as per the schedule contained in this booklet. They are well equipped with all
necessary facilities / genuine parts / oil and trained manpower. All this would ensure better care of
your bike.
Your “Avenger 220 DTS-i” has been provided with a warranty of 2 Years or 30,000 Kms.
whichever occurs earlier from the date of sale. For details please refer to “Warranty : Scope &
Limits” given in this manual.
Should you require any additional information feel free to contact us on our toll free no.:
1800 233 2453 or e-mail us at: customerservice@bajajauto.co.in or visit the Bajaj Auto website
www.bajajauto.com
Thank you for choosing a Avenger and wish you unlimited miles of happy riding !!
SERVICE DEPARTMENT
BAJAJ AUTO LIMITED
 Table of Contents
Description Safety and Warning information :
1. Technical Specifications 1
2. Identification Data 3 Warning : This indicates that a potential
3. Location of Parts 4 hazard or injury to you or other persons &
4. Steering cum Ignition lock 6 to the vehicle can happen if advice
provided is not followed.
5. Fuel Tank Cap / Fuel Tap 7
6. Speedometer Details 8
7. Control Switches 10 Caution : This indicates that a potential
8. Removal & Fitment of Side Covers 12 hazard that could result in vehicle
9. Battery / Tool kit 13
damage. Follow the Advice provided with
the caution.
10. Daily Safety Checks 14
11. How to ride your Bike 15
12. Safe Riding Tips 19 Notice:
13. Engine Oil 20 The description and illustration in this booklet
14. Wheels - Tyre 22 are not to be taken as binding on the
15. Periodic Maintenance Information 23 manufacturers. The essential features of the
16. Free Service Guidelines 26 type described and illustrated herein remaining
16. Periodic Maintenance & Lubrication Chart 27
unaltered. Bajaj Auto Limited reserves the
right to carry out at any moment without
17. Non Use Maintenance 32
being obliged to bring this booklet upto-date
18. Delivery Certificate 33 & to do modifications on the vehicle, parts or
19. Warranty Scope & Limit 34 accessories as may be convenient and
20. Battery Warranty Card necessary.
 Technical Specifications
Engine : 4 stroke Brakes
Bore X Stroke : 67.00 mm x 62.40 mm Front Brake : Hydraulic disc brake.
Eng. Displacement : 219.89 CC Rear Brake : Mechanical expanding
shoe.
Compression Ratio : 9.5 : 1
Fuel Tank Capacity
Idling Speed : 1400 +/- 150
Full : 13 liters
Max. Net Power : 19.03 PS at 8400 rpm
Reserve : 3.8 liters
Max. Net Torque : 17.5 Nm at 7000 rpm
Ignition System : DC CDI
Dimensions
Spark Plug : CHAMPION P-RG6HCC,
BOSCH - UR6CE
Spark Plug Gap : 0.8 to 0.9 mm. Length : 2177 mm
Width : 806 mm (Cruise)
Transmission : 5 speed constant mesh
: 801 mm (Street)
Gear Shifting
Height : 1309 mm (Cruise)
Pattern : 1 Down 4 Up
: 1070 mm (Street)
Engine Lubrication : Wet sump, forced
Wheel base : 1490 mm
Cooling System : Air cooled with oil cooler
Ground Clearance : 169 mm
Starting Aid : Electric Starter

1
 Technical Specifications
Tyre Size Pilot Lamp : 4W
Front : 90/90 - 17, 49P Tail /Stop Lamp : 5/21W
Rear : 130/90 -15, 66P Turn Signal Lamp : 10W
Cruise : Tube Tyre Speedometer Lamp : LED
Street : Tubeless Tyre Bajaj Logo : LED
Fuel Gauge Lamp : LED
Tyre Pressure Neutral Indicator Lamp : LED
2
Front : 1.5Kg/cm (21PSI) High Beam Indicator Lamp :LED
Rear (Solo) : 1.5Kg/cm2 (21PSI) Turn Pilot Indicator Lamp : 1.7W
Rear (with Pillion ) : 1.75Kg/cm2(25PSI) Low Battery Indicator : LED
Vehicle Kerb Weight : 156 kg. (Cruise) Horn : 12V DC
: 151 kg. (Street)
Gross Vehicle Weight : 286 kg. (Cruise)
: 281 kg. (Street) Note :
• All dimensions are under UNLADEN condition.
Electrical System : 12 Volts DC
• Above information is subject to change without
Battery : 12V, 9Ah MF any notice.
Head Lamp : 55/60W (Blue Tinge) • This vehicle complies to BS IV standards.
• AHO is government regulation.
2
 Identification Data
The Frame and Engine serial numbers are used to register the motorcycle. They are the unique
alpha-numeric codes to identify your particular vehicle from others of the same model and type.

Engine Number Location

On LH Side Crankcase Near Gear
Change Lever (Alpha-Numeric - 11 Digits)

Frame Number Location

On Side of Steering Tube
(Alpha-Numeric - 17 Digits)

3
Location of Parts

Grab Handle / Fuel Tank Cap Speedometer

Pillion Back Rest.

Rear
Shock Absorber Brake Lever

Front Fork

Pillion
Foot Rest

Brake
Lever

Note: Wind shield is not part of standard fitment and is sold as an accessory at our showrooms.
4
Location of Parts

Grab Handle / Fuel Tank Cap Speedometer

Pillion Back Rest.

Brake Lever
Rear
Shock Absorber

Front Fork

Pillion
Foot Rest

Brake
Lever

Note: Wind shield is not part of standard fitment and is sold as an accessory at our showrooms.
5
 Steering cum Ignition Lock

Ignition Lock : It is located at right side of Steering Lock :

the frame below ‘Fuel Tank’. It has three To lock the steering : Turn the handle bar to
positions. The key can be removed from
switch only in ‘OFF’ position. the left. Slide open key hole cover clockwise.
Insert key in lock. Turn the key anti-clockwise
Key position Function and push key in while turning the handle bar
OFF Engine off. slightly to ‘Right’, and turn the key clockwise
All Electrical circuits off (Original position). Pull the key out.
ON Engine can be started in this To unlock the steering : Insert key in lock
Position by starter button. and turn anti-clockwise. Hold the key in this
position & move the handle bar to ‘Right’ to
P (Park) Engine & all electrical off. release the lock. Pull the key out.
Only Tail & Pilot lamp ‘ON’.
Key : A common key is used for Ignition lock,
Warning : If you leave the P (Park) Steering lock, Fuel tank cap and Side cover
position on for a long time (@1 hour), the lock.
battery may get discharged.
6
Fuel Tank Cap / Fuel Tap

Fuel Tap Fuel Tank Cap

Fuel tap lever has following positions. • To open the fuel tank cap, open the flap.
Insert the key in the lock and turn it
clockwise and lift fuel tank cap.
OFF : When fuel supply is to be • To lock the ‘Fuel Tank Cap’ insert the key
cut off. in the lock and turn it clockwise and press
ON : When fuel level is above fuel tank cap. ‘Click’ sound ensures cap is
reserve position. fully locked.
RES : When fuel level is below Precaution :
reserve position. Dont attach metallic ‘Key chain’ as it may damage
paint of petrol tank.
7
 Speedometer Details

5
7 8 9
1
4 6 10

2
3

Speedometer display will work when both Ignition 6. Turn Signal Indicator (LH & RH): It blinks
switch & kill switch are in ‘ON’ position. when Turn signal switch is turned to L/R side.
1. Speedometer : The speedometer needle 7. Neutral Indicator Light : When transmission is
shows the speed of the vehicle in Km/Hr. in neutral, the neutral indicator light will glow.
2. Odometer : It shows the total distance that 8. Fuel level indicator: It shows approx.
the vehicle has covered. available fuel in fuel tank. Tank icon ( )
3. Trip Meter : It shows the distance traveled blinks when fuel level indicator is in red zone.
since it was last reset to zero. 9. Low Battery Indicator : It indicates battery
4. Trip Meter Knob : Reset trip meter to zero needs charging.
by turning reset knob anticlockwise. 10.Hi Beam Indicator Light : When the H/L is
5. Bajaj Logo : Bajaj logo flying ‘B’. on & the hi beam is selected then indicator
light will glow.
8
 Speedometer Setting

After power on speedometer pointer moves from 0 to 160 Trip Meter Reset :
& returns back to Zero. • Trip meter knob is provided for selecting & resetting
ODO Meter (ODO): ‘TRIP’.
• 6 digits with 'ODO' & 'km' icons.
• After 9, 99,999 Km, the odometer display rolls over to 0 1. Press trip meter knob Mode changes from
and continue updating. for less than 2 sec. ODO - TRIP - ODO
Trip Meter (TRIP): 2. Press trip meter knob TRIP meter reading will
• 4 digits with a decimal point after third digit & 'TRIP' for more than 5 sec. reset to zero.
icon. ODO meter reading can
• Rolls over to zero after 999.9 Km & continue updating. not be resetted.

9
 Control Switches

A D

Left Handle Bar Switches C. Horn Button : ( ) Press button for

A. Dipper Switch : When headlight is ON, sounding horn.
High or Low beam can be selected with D. Pass Switch : Press the switch to flash
the dipper switch. the head light. It is used to give signal to
: High Beam : Low beam vehicles coming from opposite side while
overtaking.
B. Turn Signal Switch : When the turn signal
switch is turned to Left ( ) or Right ( )
the corresponding turn signals flash on and
off. To stop blinking push the switch in &
release.

10
 Control Switches

AHO Feature (Automatic Headlight ‘ON’)

There is no ‘Light switch’ on RH control
F switch.

Ignition switch ‘ON’ Speedometer illumination

Engine ‘OFF’ Tail lamp, Pilot
Lamp will get ‘ON’
E

Effect of pressing In addition to above

‘Pass Switch’ Hi-beam will get ‘ON’
Right Handle Bar Switches
E. Starter Button : Ignition switch ‘ON’ & Engine Running
Starter button operates the electric starter. Speedometer illumination, Tail lamp, Pilot Lamp will
It is recommended to start the engine with get ‘ON’.
in addition to above, headlamp will get on as given
the transmission in neutral. below.
Vehicle in Gear - Press clutch lever &
operate starter button to start the engine.
Hi/Low beam Headlamp Effect of
F. Engine Kill Switch : Switch Status Pass Switch
The engine kill switch is used for switching
ON & OFF the engine. Low beam Low beam ‘ON’ Hi beam ‘ON’
: Engine OFF
: Engine ON Hi beam Hi beam No change
‘ON’
11
 Removal & Fitment of Side Cover

RIGHT SIDE COVER

B F
E

C
D

Removal of Side Cover RH Fitment of Side Cover RH

• Insert the key into the cover lock (A) and • Match ‘Side Cover’ rear bullet (D) with bracket
turn the key clockwise. (E) located on chassis & slide toward front.
• Pull front side (B) first • Match ‘Side Cover’ front bullet with slot (F) &
press side cover by other hand for positive
• Slide side cover toward rear (C). engagement of bullet of side panel with tank
• Take out ‘Side cover’. slot.
• Match ‘Side Cover’ lock properly.
• Insert the key into the cover lock (A) and turn
the key anti-clockwise.
CAUTION : Remove cover as described
above, Otherwise the lugs may break. CAUTION : Ensure tool kit is inserted
properly into compartment
12
 Battery / Tool Kit

Battery Tool Kit Location

• It is located inside the ‘Side Cover’ RH. • Tool kit is located in tool kit compartment.
• Always maintain electrolyte level in each
• Lid is provided inside RH side cover.
cell between max and min level lines.
• Always keep a watch on battery charge
level indicating icon, if it flashes (indicates First Aid Kit Location
battery is in low charged condition), show
the vehicle to authorised BAL dealer. • First aid kit is to be stored along with tool
kit in the slot provided near battery.

CAUTION : Remove cover as described

above, Otherwise the lugs may break. CAUTION : Ensure tool kit is inserted
properly into compartment.
13
 Daily Safety Checks
Before riding motorcycle be sure to check • Brake Pedal Play - 20 to 30 mm.
following items. Please give proper importance
• Wear lining Indicator within usable range.
to these checks and perform all of them
No brake dragging.
before riding motorcycle.
If any irregularities are found during these • Brake Fluid level above MIN mark
checks, refer to the Maintenance chapter & provided on reservoir, applicable to disc
see your dealer for the action required to brake vehicle.
return the motorcycle to a safe operating • Drive Chain slack of 25 to 35 mm
condition. adequately lubricated.

Warning : Failure to perform these • Function of all lights & horn

checks every day before you ride may • Clutch lever play - 2 to 3 mm
result in serious damage or severe
• Smooth steering movement without
accident.
restriction.
• Enough fuel level for planned distance of • Both stand return to their fully up position.
journey. No fuel leakage in fuel lines. • Correct inflation pressure in both tyres
• Engine oil level (between upper and lower Adequate tyre tread depth - no cracks /
level mark) cuts.
• Throttle cable play of 2 ~ 3 mm. Smooth • Correct rear viewing span adjustment of
operation and positive return to closed mirror.
position,

14
 How to Ride Your Bike
Starting The Engine : Note : When the engine is already warm on hot
• Keep fuel tap to ON or RES position. days (Higher than 350C), open the throttle part
• Turn ignition / kill switch to ON position. away instead of using the choke, and then start
the engine.
• Confirm that transmission is in neutral.
• If the engine is cold or when starting for Caution : Do not operate the starter
first time, use choke for quick starting. Continuously for more than 5 seconds. Wait
• Keep throttle completely closed, press for 15 seconds before you recrank.
starter button “ ”. Note : The motorcycle is equipped with a starter
• When the engine is warmed up enough to lockout switch. The starter switch will operate
idle without using choke, return the choke only when transmission is in neutral or clutch
to “OFF” position. lever depressed.

Choke “ON” - Pull Choke “OFF” - Push

15
 How to Ride Your Bike
Moving Off : Warning : When shifting down to lower
• Check that Center/Side stand is up. gear, do not shift at such high speed that
engine rpm jumps excessively. This may
• Depress clutch lever, Shift into 1st gear. cause engine damage, & rear wheel may
• Open the throttle and release the clutch skid. Downshifting should be done at
lever slowly and simultaneously. recommended speeds as shown in table.
• As the clutch starts to engage, open the
throttle a little more, giving the engine just Braking :
enough rpm to keep running. • Close the throttle completely, leaving the
clutch engaged (except where shifting gears)
Shifting Gears : so that the engine braking will help slow
• Close throttle & depress the clutch. down the motorcycle.
• Shift down one gear at a time so that you
• Shift into next higher or lower gear.
are in Neutral when you come to a complete
• Open the throttle and release the clutch stop.
lever slowly and simultaneously. • When stopping, always apply both brakes at
the same time. De-clutch as necessary to
avoid engine stalling.
• Never lock the brakes, or it will cause the
From 5th to 4th 50 km/h tyres to skid. When cornering, use brakes
judiciously & do not de-clutch. Reduce your
th
From 4 to 3 rd
40 km/h speed before you get into the corner. For
rd nd
30 km/h emergency braking, disregard downshifting,
From 3 to 2
and concentrate on applying brakes as hard
From 2 nd
to 1 st
20 km/h Gear Shifting Pattern
as possible without skidding.
16
 How to Ride Your Bike
Stopping the Vehicle : Running IN
• Close the throttle completely. Proper running-in is important for the better
• Shift the transmission into neutral. life & trouble free performance of the vehicle.
• Bring the vehicle to complete stop. • During first 2000 kms running-in period do
not exceed following speed limits.
• Turn the ignition switch off.
Parking the Vehicle : Kms 1st 2nd 3rd 4th 5th
• Support the motorcycle on a firm level 0 - 1000 15 30 45 55 65
surface with the center or side stand. 1000 - 2000 20 40 55 65 75
• Lock the steering.
• Always keep the speed below the limits
CAUTION : Do not park on a soft or mentioned in the table.
steeply inclined surface or the motorcycle
may fall over. • Do not race the engine excessively.
Whenever vehicle is fallen down, remove plug of • Do not start moving or race the engine
'Y connecter drain tube' & drain out accumulated immediately after starting. Run the engine
petrol for a minute at idle speed to give the oil a
Location - Near Main Stand
chance to workup into the engine.

'Y connecter drain

tube plug’
17
 How to Ride Your Bike
Fuel Saving Tips : Ensure following maintenance points to get
A well maintained vehicle and good driving optimum performance from your bike.
can contribute a lot to the saving of petrol.
Following are a few simple fuel saving tips. Fuel Check fuel lines & connections
for leakage.
Good Riding Habits :
Spark Plugs Inspect and clean spark plugs.
• Ride smoothly and steadily at an optimum
Adjust electrode gap. Replace
driving speed of 40 to 50 Km/h
spark plugs as per P.M. Chart.
• Avoid harsh braking.
• Change the gear judiciously according to Air Filter Clean the air filter element
the speed and load requirement. periodically. Replace as per
• Don’t overload the vehicle above the Periodic Maintenance Chart.
specified payload. Engine Oil Check engine oil level. Always
• Use the accelerator judiciously. use recommended grade and
• Cut off the engine if you want to stop for quantity.
more than two minutes. Brakes Ensure that the brakes are not
How to check mileage (Fuel efficiency) dragging / binding.
Best way to calculate mileage is by following Clutch Ensure correct clutch lever
the full tank to full tank method. play.
• Fill way tank full up to small mouth (brim). Tyre Air Always maintain recommended
• Run the bike for say 100 km.
• Fill the tank full again in same fuel filling Pressure tyre pressure.
station, probably with same fuel dispenser. Carburettor Clean & adjust the carburettor.
• Divide kilometer run / fuel quantity filled. Adjust idling speed.
18
 Safe Riding Tips
Safe Riding Tips • Drive cautiously. Start early & reach your destination
• Always wear Helmet while driving or riding. Your safely.
helmet should conform to appropriate Indian • Always carry vehicle registration & insurance papers,
standards. and a valid driving licence with you.
• Read thoroughly the instructions • Avoid driving on loose sand or stones where vehicle
given in this manual and follow is likely to skid.
them carefully. • Properly wrap-up loose clothes while driving or riding
• Avoid unnecessary accessories to avoid entangling in wheel or other objects on road.
for the safety of both rider and • Always concentrate on riding for safety.
other motorists.
• Get familiar and follow traffic rules & regulations in Monsoon Care :
your states as well as general traffic signs. • It is suggested to customer to take appropriate care
• Familiarise yourself well with starting, acceleration and in area of heavy monsoon or high rainfall area. The
braking of the vehicle. appropriate surface preventive coat to avoid rusting /
• When applying the brakes, use both front & rear poor surface finish on account of adverse atmospheric
conditions.
brakes simultaneously. Applying only one brake may
cause the vehicle to loose control. • Vehicle cleaning to be done with soft & clean wet
• Riding at proper speed and avoiding unnecessary cloth to avoid scratches on painted parts.
acceleration and braking are important not only for • Clean & lubricate all the important parts as detailed in
safety and low fuel consumption, but also for longer a periodic maintenance chart.
life of the vehicle. • Do not apply direct water jet on painted, electrical /
• During monsoon drive the vehicle more cautiously. electronic parts.
Remember vehicles skid more easily during light • Do not obstruct engine cooling by adding mud
showers. protection sheet from front.
19
 Engine Oil
A : Oil Recommended Engine Oil:
filler
Always insist on Bajaj Genuine
hole
Engine Oil for optimum engine
B : Oil
A
level
performance and warranty
gauge benefits. It is a specially
formulated oil for vehicles with
B DTS-i engines.
C
D Recommended Grade
Engine oil
Bajaj DTS-i SAE 20W50 API ‘SL’
Engine Oil Level Checking :
10000
• Check engine oil level every day. Park
vehicle on level surface.
• Check oil level through oil level gauge ‘B’. • Engine oil replacement frequency : 1st service &
• Always maintain engine oil level between then every 10,000 Km.
upper (C) and lower (D) mark provided on • Engine oil level top-up frequency : Every 5000 km.
Cover RH. Top up with specified grade of CAUTION :
oil if the oil level is below lower level mark. • It is most important to adhere to
• Completely screw in the dipstick after oil recommended grade & frequency of oil
filling is over. change for the purpose of long life of
Engine Oil Capacity : critical engine components. For details
• Refill at servicing : 1150 ml. refer periodic maintenance chart.
• During engine overhaul : 1200 ml. • Do not reuse drained oil.
20
 Battery
CAUTION : Do not drive/run vehicle in
battery disconnected condition. It may
Max lead to damage of electrical /electronic
Min components.

• Warranty on battery is 18 months from the

date of purchase of vehicle.
How to keep battery healthy ?
• Switch ‘Off’ ignition if engine is not running.
Battery : 12V-9 Ah MF
• Do not press starter button for more than
• Always ensure that battery electrolyte level
5 sec. After 3 successive cranking, wait for
is in between max & min level marks.
15-20 sec. for battery to recover.
• Check & top up battery by distilled water if
electrolyte level is below min level mark. • Do not add extra electrical accessories such
as - Remote, Bigger horn, Musical brake light
CAUTION : Tap water is not a substitute etc. This will reduce life of battery
for distilled water and will shorten the life • If vehicle is to be stored for more than 2
of the battery. weeks disconnect battery to avoids self
• Environment care must be taken to discharge.
dispose off the used battery. It is always
recommended to hand over the same to CAUTION :
the Authorised battery / Bajaj dealer for • While disconnecting always disconnect
proper disposal of the same. negative (-ve) cable first.
• When battery is found discharged, it is • While refitting always connect positive
advised to get it charged immediately. (+ve) cable first.
21
 Wheels - Tyre
Cruise Tube Tyre Street Tubeless Tyre
CAUTION : The walls of the tyres in
contact with the wheel rim seals air &
should not be damaged in any way during
fitment / removal of tyre.

Wheel Puncture:
• Visit nearest known tubeless tyre repair shop
to remove puncture.
• Remove puncture by Filler or Plug method
• Do not use patch method to remove puncture.

Tube Tyre: Ensure no damage to wheel rim Tyre Pressure :

while removing tyre for puncture & Keep appropriate tyre pressure to increase life
replacement. of the tyre & for better fuel consumption.
Ensure spokes are fully tight. Incase loose
spoke, kindly visit to authorised service center Front 21 PSI
for re-tightening.
Avenger 220 Rear (Solo) 21 PSI
Tubeless Tyre :
Rear (with Pillion) 25 PSI
The main advantage of tubeless tyres is in
case of puncture the rate of air leak is very
slow, hence customer can easily drive the Note : Incase the motorcycle is fitted with
vehicle upto nearest puncture repair shop for imported tyres. compliance to respective indian
removing puncture. standard & central motor vehicle rules has been
ensured.
22
 Periodic Maintenance Information

MIN A

Front Brake Fluid Level Head Light Beam Adjustment

• Front brake fluid master cylinder reservoir is The Head light beam can be adjusted Vertically and
located near RH switch on handle bar. Horizontally. If adjusted too low, neither low nor high
• To check oil level, keep the vehicle on beam will illuminate the road adequately. If adjusted
too high, the high beam will fail to illuminate the road.
Centre stand with handle bar in straight A. Horizontal Adjustment screw : Turn the horizontal
position. adjuster on the headlight with a screw driver in or out
• Always ensure that brake fluid level is above unit the beam points straight ahead.
‘MIN’ mark given on inspection window. Turn the horizontal adjuster clockwise to face the
• Use only DOT 4 brake fluid (from sealed headlight left.
container) to top up if required. B. Vertical Adjustment screw : Turn the Vertical adjuster
on the headlight in or out to adjust vertically.
• Change the brake fluid as per periodic Turn the Vertical adjuster clockwise to face the
maintenance schedule. headlight up.
23
 Periodic Maintenance Information
Spark Plug Matte finish painted parts cleaning
• Remove spark plugs Do’s :
by using plug spanner. ∙ Use Colin or dish washing detergent
• Clean the spark plugs. 0.8 to
0.9 mm
solution for cleaning.(1 spoon in ½ bucket)
• Adjust the gaps if Remove foreign substances like insect
incorrect by bending remains, road debris using a soft brush.
outer electrode carefully. ∙ Use microfiber cleaning cloths Ex.- Muslin
cloth for painted parts cleaning.
Spark Plug Gap : 0.8 to 0.9 mm.
Don’ts :
Spark Plug (2 Nos.) : CHAMPION P-RG6HCC ∙ Do not use wax/spray/products made for
BOSCH - UR6CE normal glossy paint for cleaning.
∙ Do not use products that are even mildly
abrasive, such as polishes, glazes, or
rubbing compounds.
Drive Chain Slackness
∙ Do not use mechanical cleaners/polishers.
• Chain slackness will have to be adjusted
∙ Do not use terrycloth or paper towels or
whenever required.
shine enhancement products.
• Std. Chain slackness 25 ~ 35 mm.
∙ Do not rub the finish vigorously, this will
• Marking on chain adjusters should be burnish the paint finish, causing a
identically positioned on both sides. permanent shiny spot. Shiny spots cannot
be removed.
∙ No Polishing/Teflon coating on painted
parts.
24
 Periodic Maintenance Information

Drive Drive
Chain Chain
Cleaning Lubrication

Drive chain must be cleaned & lubricated as Method of O-ring Chain Lubrication :
per periodic maintenance schedule. • Park vehicle perpendicular to the ground on level
Drive Chain (O-ring type) surface. Clean the chain by using lint free cloth (If
excessive mud / slush found approach Bajaj
• ‘O’ rings must always be kept wet for
Service Center for proper cleaning)
best performance hence lubricate every • Shake the can vigorously by holding vertically
500 Km. upright till the noise of steel ball inside heard
• O-ring chain lubrication can easily be uniformly.
• Hold spray can at the back of rear sprocket with
done by owners using Bajaj ‘Chain Lube extension tube nose at 5~10 cm.
Spray Can’ available with Bajaj dealers. • Rotate the wheel in reverse direction & spray the
lube on middle portion of the chain up to full
length of the chain.
25
Free Service Guidelines Customer ID :

Instruction to avail Free Service through

Digitized Free Service Coupon Periodic Service Criteria
Please follow following procedure : -
Service Days Kms
• Please provide your mobile number to Dealer
at the time of buying of new Bajaj Vehicle. 1st Free
Service 30~45 500~750
• In case of change in mobile number, please
update to Dealer / ASC. 2nd Free

whichever occurs earlier

• You will receive the Customer ID through SMS Service 240 4500~5000
at the time of buying of new vehicle. 3rd Free
• Please note the Customer ID in Owner’s Service 360 9500~10000
Manual for your reference.
1st Paid
• During Free Service, please provide your Service
Customer ID to Dealer / ASC workshop.
2nd Paid 120 Days Every
• When you are at Dealership / ASC workshop Service from 5000 Km
for Free Service, you will receive the ‘Unique
3rd Paid last Service after previous
Coupon Number’ (UCN) through SMS in your
mobile. Service service
• Please inform the UCN to Dealer / ASC at the 4th Paid
time of Free Service. Service

Availing all Free / Paid Services, replacing mandatory periodic parts & engine oil will entitle warranty eligibility.

26
 Periodic Maintenance & Lubrication Chart
RECOMMENDED FREQUENCY
Sr. Operation
st nd rd
Servicing 1 Free 2 Free 3 Free Every Subsequent
No. 500 4500 9500 5000 Km after
Kms ~ ~ ~ Previous Service
750 5000 10000
1. Water wash & dry the vehicle Ensure to prevent water
completely        entry in Petrol tank,
Silencer & electrical
Parts. Use caustic free
detergent for washing.

2. Engine oil (Bajaj DTSi 10000 oil) C,R R Top R Top R Top R BGO DTSi 10W30 for
Up Up Up 100cc models.
BGO DTSi 20W50 for
Models above 125cc.

3. Engine oil filter** C,R R R R R

4. Oil strainer CL CL CL CL CL

5. Body centrifugal filter** CL CL CL CL

6. Starter Clutch (Dry Type)** L L L L L L L Use recommended

Molycote grease.

7. Spark plug CL,A,R CL,A CL,A R

8. Air cleaner element *** CL,R CL CL CL R CL CL R

 Tick in the box   after replacing the periodic parts. 27

 Periodic Maintenance & Lubrication Chart
RECOMMENDED FREQUENCY
Sr. Operation
st nd rd
Servicing 1 Free 2 Free 3 Free Every Subsequent
No. 500 4500 9500 5000 Km after
Kms ~ ~ ~ Previous Service
750 5000 10000
9. Air filter cover ‘O’ ring CL,R CL CL CL R CL CL R

10. In line paper filter R R R

11. Fuel cock paper filter. R R R

12. Fuel cock sediment bowl cleaning CL CL CL

13. Carburettor rubber duct C,R C,R

14. Fuel pipe C,R C C C R C C R

15. Valve tappet clearance C,A C,A C,A C,A C,A C,A C,A C,A

16. Non-Sealed drive chain CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A
cleaning & lubrication

17. Sealed drive chain CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A Customer to apply OKS
cleaning & lubrication chain lub spray at every
500 kms.

18. Engine air breather tube C C C C C C C C

19. Silencer drain hole cleaning CL CL CL CL CL CL CL

 Tick in the box   after replacing the periodic parts. 28

 Periodic Maintenance & Lubrication Chart
RECOMMENDED FREQUENCY
Sr. Operation
st nd rd
Servicing 1 Free 2 Free 3 Free Every Subsequent
No. 500 4500 9500 5000 Km after
Kms ~ ~ ~ Previous Service
750 5000 10000
20. Silencer tail pipe cleaning** CL CL CL CL CL CL CL

21. Brake cam & brake pedal pivot pin C,L,R C C,L,R C,L,R C,L,R C,L,R C,L,R C,L,R Use AP grease.

22. Brake lining or pad - C,R C,R C,R R C,R C,R R

Check wear indicator

23. Brake fluid level **- top up / replace C,A,R C,A R Use recommended
brake fluid
(DOT3/DOT4)

24. Disc brake assly -- Check functionality, C C C C

leakage or any other damage.

25. All cables & rear brake pedal-free play C,A C,A C,A C,A C,A C,A C,A C,A

26. Battery electrolyte level, specific gravity C,A C,A C,A C,A C,A C,A C,A C,A Not applicable for
VRLA battery

27. Wiring harness & Battery connections- C,A,T C,A,T C,A,T C,A,T C,A,T C,A,T C,A,T C,A,T
routing, tie bands & clamps tightness.

28. Ignition switch barrel cleaning C,CL C,CL C,CL C,CL C,CL C,CL C,CL C,CL Use WD40 spray

 Tick in the box   after replacing the periodic parts. 29

 Periodic Maintenance & Lubrication Chart
RECOMMENDED FREQUENCY
Sr. Operation
st nd rd
Servicing 1 Free 2 Free 3 Free Every Subsequent
No. 500 4500 9500 5000 Km after
Kms ~ ~ ~ Previous Service
750 5000 10000
29. Handle bar control switches C,CL C,CL C,CL C,CL C,CL C,CL C,CL C,CL Use WD40 spray
contacts cleaning

30. Steering play C,A C,A C,A C,A C,A C,A C,A C,A

31. Steering stem bearing*** & C,CL,L,R C,CL, C,CL, C,CL, Check & replace if
Cap steering bearing (Plastic)** L,R L,R L,R Damaged. Use HP
Lithon RR3 grease for
lubrication.

32. Main stand & side stand pin** CL,L CL,L CL,L CL,L Use AP grease.

33. Swing arm pivot pin L L L L L L L

(for non silent bush)**

34. All fasteners tightness C,T C,T C,T C,T C,T C,T C,T C,T

35. Engine foundation silent bushes** C C C

36. General lubrication-Clutch lever, L L L L L L L L Use AP grease.

front brake lever, kick lever.

37. Idle speed / CO% C,A C,A C,A C,A C,A C,A C,A C,A

 Tick in the box   after replacing the periodic parts. 30

 Periodic Maintenance & Lubrication Chart
RECOMMENDED FREQUENCY
Sr. Operation
st nd rd
Servicing 1 Free 2 Free 3 Free Every Subsequent
No. 500 4500 9500 5000 Km after
Kms ~ ~ ~ Previous Service
750 5000 10000
38. Coolant level in expansion tank** C,A C,A C,A C,A C,A C,A C,A C,A Use recommended
'Ready to use coolant'.

39. Coolant hose damage/clamps/leakage** C C C C C C C

40. Radiator fins** C C C C C C C

41. Spoke tightening**-Front & Rear C,T C,T C,T C,T C,T C,T C,T C,T

42. Front fork dust seal & Rubber bellow CL CL CL CL CL CL CL

43. SAI, EVAP hoses - Check functionality, C,R C,R C,R C,R C,R C,R C,R C,R Replace if cut / damaged
leakage or any other damage**
44. EVAP drain tube cleaning** CL CL CL CL CL CL CL CL

 Tick in the box   after replacing the periodic parts.

** As applicable to model
*** More frequent cleaning may be required while driving in dusty environment.
C : Check, A : Adjust, CL : Clean, R : Replace, T : Tighten, L : Lubricate
Note : Periodic parts, Oil, Coolant, Filters, All types of greases, Cleaning agents, Cables, Wear & tear parts, Rubber
‘O’ rings / oil seals / pipes, Gaskets to be replaced as per Periodic Maintenance and Lubrication Chart are mandatory
and the same are chargeable to customer.
31
 Non-Use Maintenance
Non-use maintenance is necessary if a vehicle • Do not apply oil on front brake disc, to
remains off road for a longer duration (more prevent rusting. If the front brake disc rusts
than 15 days**). The correct and careful non- during storage, do not attempt to clean it
use maintenance carried out before storing the with soap water. The rust will go off
vehicle will prevent the vehicle from rusting automatically during first few application of
and from such other non-operational damages brake.
like fire hazards.
** For Battery :
• Clean the entire vehicle thoroughly.
a. Remove battery and keep it on wooden
• Empty the fuel from the fuel tank and
plank, in properly ventilated area.
carburettor float bowl (if fuel is left in for a
b. Before taking the vehicle for use.
longer time, the fuel will break and gummy
• Get the battery recharged from the
substance could clog the carburettor).
Authorised Service Center / Battery Dealer.
• Remove spark plug & put several drops of
• Apply petroleum jelly on terminals.
2T oil into the cylinder. Crank the engine
(applicable to certain models).
over slowly a few times to coat cylinder wall
with oil & install back spark plug. Preparation for regular use after storage :
• Set the vehicle on a box or a stand so that • Clean the vehicle
both wheels are raised off the ground. • Make sure the spark plugs are fitted tightly.
• Spray oil on all unpainted metal surfaces to • Fill the fuel tank with fuel.
prevent rusting. Avoid getting oil on rubber • Change the engine oil.
parts or brake liners. • Check all the points listed in the Daily Safety
• Cover entire vehicle neatly. Make sure that Checks section.
storage area is well ventilated & free from • Check and inflate tyres to proper tyre
any source of flames or spark. pressure.
• Fill 10% excess air pressure in both wheels.
32
 Delivery Certificate
FRAME NO. :

ENGINE NO. : Sold on.:

Customer’s Name Mr/Mrs/Miss :

Address : Contact No.:

I have taken possesion of motorcycle along with the following items.

1. Owner's Manual 5. Standard Accessories

2. 2 nos of key 6. Battery Make ___________ Sr. No. ____________
3. Set of tools 7. Tyre Fr Make ___________ Sr. No. ____________
4. First Aid Kit Rr Make ___________ Sr. No. ____________
The Vehicle has been delivered to my satisfaction & I have understood all terms and conditions of
warranty, service schedules & maintenance tips and shall abide by them.

Dealer Code :
Dealer Name :
Address :
Customer's Signature (To be filled in by the dealer) Contact No. :

Important - "Do not detach this page from Owner's Manual"

33
 Warranty : Scope & Limit
Bajaj Auto Limited gives the following warranty in respect though their dealer will give full assistance in preferring
of the “Avenger 220 DTS-i” motorcycle such claims.
manufactured by them. Bajaj Auto Limited undertake no liability in the matter of
Every possible care and precaution has been taken to consequential loss or damage caused due to the failure of
ensure quality in respect of the material & workmanship in the parts. Delay, if any, at the repairing workshop in
the vehicles manufactured by us. Bajaj Auto Limited will carrying out repair to vehicle shall not be a ground for
repair or replace at their Authorised Workshops, free of extending the warranty period, nor shall it give any right to
charge, part or parts there of as may be found, on the customer for claiming any compensation for damages.
examination, to have manufacturing defect within a period Bajaj Auto Limited reserves the right either to repair or
of 2 Years or 30,000 Kms., whichever occurs earlier from replace the defective parts.
the date of sale subject to fulfillment of condition stipulated Where a defective part can be replaced by part/s of
in part A, B & C given here under alternative brand/s, which are normally used by Bajaj
Warranty is applicable for only first owner of vehicle. Auto Limited in the course of manufacture, Bajaj Auto
Limited reserves the right to carry out the replacement
Part A:
by a part or parts of any such alternative brand/s.
Warranty claims in respect of such items like shock
This warranty and any claim arising there from is subject
absorbers, speedometers etc. though claimed through us,
to Pune jurisdiction only.
are subject to acceptance of the respective manufacturers.
In all such cases the decision of the respective Part B:
manufacturer will be final and binding. No claim for exchange or repair can be considered
Proprietory parts like tyres, tubes, battery and spark plugs unless the customer :
are warranted by their respective manufacturers (Only one a. Ensures that immediately upon detection of the
year warranty from the date of purchase/as applicable) defect, he approaches any nearest Authorised Bajaj
and should be claimed on them directly by the customer. Vehicle Dealers & Recommended Authorised Service
Bajaj Auto Limited shall not be Liable to replace them Centers with the concerned vehicle and enables him
34
 Warranty : Scope & Limit
to remove and despatch the part / parts attributing to Part C :
the manufacturing defect to the Company. Further this warranty is NOT applicable to :
b. Produces the Owner's Manual, in original, to enable 1. Normal maintenance operations like brake & clutch
that dealer to verify the details. adjustments, cleaning of fuel system, engine tune-up or
It must be expressly understood that claims forwarded such other adjustments.
directly to us by the owner / customers will not be 2. Parts subjected to normal wear & tear like Clutch Plates,
entertained at all and such defective part/parts thus Brake Shoes, Chain, Sprockets, Fork Oil Seal, Spark
forwarded by them will lie at our factory at their own Plug, Control Cables, Brake Pads.
risk, and this warranty shall not be enforceable. 3. Replacement of electrical items like self-start’s wear and
To avail benefits of warranty, following are tear items (if fitted), bulbs & rubber components like
mandatory grommets, ‘O’ rings, bellows as well as filters, packings,
1. Availing of Initial 3 Free Services without lapse. gaskets, fasteners etc.
2. Availing 4 paid services at every 5000 kms. or 120 4. Painted parts. Only blistering or peeling off of paint film
days whichever occurs first without any lapse. are covered under warranty. Any defect arising out of
3. Availing of all above services at the Authorised external damages or due to usage of protective covers
Vehicle Dealers & Recommended Authorised Service /additional protective coatings adverse atmospheric
condition etc. is not allow like under warranty.
Centers.
4. Maintaining all service records duly signed and 5. Damage to Matte paint finish due to use of Teflon
Coating / Rubbing / Polishing or any commercial shine
stamped by dealers.
enhancement products.
5. Usage of only recommended engine oil
6. All consumables like Engine oil, Fork oil, Brake Oil,
“Bajaj DTS-i 10000” at specified frequency for drain
Grease etc. are chargeable to customer.
interval of 10,000 kms. & engine oil level top-up at
7. Any defect arising due to above consumables not
5000 kms.
changed as per scheduled or if used other than the
6. Replacing mandatory periodic parts such as air filter, recommended one.
oil filter etc. as per periodic maintenance schedule.
35
 Warranty : Scope & Limit
7. All chrome plated parts are prone to rust or 12. Vehicles which are not being serviced at
corrosion in coastal area or in acidic environment or recommended dealers as per the service schedule
due to neglected cleaning etc. However chrome film described or which have not been operated or
peeling is covered under warranty in general maintained in accordance with the instructions
atmospheric conditions. Blue/ Yellow colouration of maintained in the Owner’s Manual.
silencer near exhaust port is permissible and hence 13. Vehicles used for any competition or race and/or for
not covered under warranty. attempting to set up any kind of record.
8. Oxidation of unpainted/painted crankcase, cylinder 14. Any failure arising due to use of adulterated or bad
block, cylinder head etc. in acidic environment or in quality fuel. Parts affected due to bad fuel quality are not
a coastal area. covered Under warranty.
9. Valve lapping is to be carried out if required. 15. If additional electrical accessories e.g. Remote, Bigger
10. Parts of the vehicle that have been subjected to horn, Musical brake light etc. fitted on vehicle.
misuse, accident, negligent treatment OR which have 16. If the vehicle has been used for commercial purpose
been used in conjunction with parts & an equipment like Taxi or any other means of commercial
not manufactured or recommended for use by Bajaj transportation.
Auto Limited, if in the sole judgement of Bajaj Auto Bajaj Auto Limited reserves the right to make any changes in
Limited, such use prematurely affects the design or to add any improvements on the vehicle at any
performance and reliability of the vehicle. time without incurring any obligation to install the same on a
vehicle previously supplied and sold. Also, the conditions of
11. Parts of the vehicle that have been altered and this warranty are subject to alteration without any notice.
modified or replaced in unauthorized manner like use
of wider tyres, loud silencers etc and which in the
This warranty is the entire written warranty given by Bajaj
sole judgement of the Bajaj Auto Limited affects its
Auto Limited for “Avenger 220 DTS-i” motorcycle’ and
performance and reliability.
no other dealer or its or his agent or employee is authorised
to extend or enlarge this warranty.
36
 BATTERY WARRANTY CARD
MAKE OF BATTERY : ........................
MFG. CODE OF BATTERY : SR.NO.:
TYPE OF BATTERY : DATE OF SALE :
NAME OF OWNER AND ADDRESS :

TYPE OF VEHICLE : REG. NO.:

FRAME NO.: ENGINE NO.:

SERVICE RECORD
Sr. Age Specific Dealer’s Stamp * Code For Remarks:
Date Gravity Voltage Remarks & Signature * Code
No. Mths. LL : Low electrolyte level.
1 AE : Electrical system needs attention.
2 IR : Insufficient running of vehicle.
3 CB : Cover broken.
4 BC : Broken Container.
5 PM : Poor maintenance.
6 BA : Battery abused.

Note : Customer should insist that “Service Record" must be filled by respective authorised battery dealer as proof of specified
maintenance for easy settlement of claim, if any.
 TO BE FILLED IN BY BATTERY DEALERS / DISTRIBUTORS
IN CASE OF CLAIM
Name of Dealer & Code :__________________________________________________________________
__________________________________________________________________________________________
Date of claim :________________________________________________Battery Type :_______________
Serial No. :__________________________________________________Date of Fitment :______________

Failure Mode (Please tick as applicable)

• Loose connection • Overcharge / Undercharge
• Internal Short • Reverse Charge
• Plate Shedding • High Specific Gravity Electrolyte
• Intercell Connection • Electrolyte Contamination
• Does not Hold Charge • Electrolyte Level not Maintained
• Wrong Assembly • Left Lying Idle
• Wrong Application
• Terminal Corroded

# Claim Accepted ## Claim Rejected

Details of Repair, if any____________________________________________________________________________

Note:
Please contact nearest respective authorised battery dealer for details immediately after purchase of
vehicle.