Lee Spring Catalogue
Lee Spring Catalogue
Lee Spring Catalogue
STOCK SPRINGS
compression springs
Bantam™ Mini
Compression Springs
Die Springs
Extension Springs
Torsion Springs
Custom Springs,
Wire Forms & Stamping
Nº 5692
Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
SKINNY&STRONG
leespring.co.uk
Call: +44 (0)118 978 1800 | Fax: +44 (0)118 977 4832 | www.leespring.co.uk
2 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
CONTENTS
INTRODUCTION 4
Benefit from the Lee Spring Difference 6
Guide to Lee Spring Part Numbers 7
STOCK SPRINGS
Spring Selection Kits 8
LeeP™ Plastic Composite Springs 9
Compression Springs 12
Bantam™ Mini Springs 12
Lite Pressure Series 17
Instrument Series 32
Standard Series 45
Heavy duty Series 103
High Pressure Series 108
Die Springs 113
REDUX™ Wave springs 124
Belleville Spring Washers 139
Extension Springs 144
Torsion Springs 171
Speciality Stock Parts 189
Constant Force Springs 189
Battery Springs 191
Continuous Length Extension Springs 193
CUSTOM SPRINGS
Spring design and manufacture service 197
SPECIFICATION FORMS
Wave springs 198
Constant force springs 199
Compression springs 200
Conical springs 201
Extension springs 202
Swivel hook springs 203
Torsion springs 204
Battery springs 205
Belleville spring washers 206
ENGINEERING DATA
Specifications and tolerances 207
Glossary 208
Using microns and geometric solutions 209
Conversion data 210
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 3
FROM 10 TO 10 MILLION.
STOCK SPRINGS OR CUSTOM SPRINGS
If you need it, If you think it,
we can do it. we can make it.
The catalogue lists thousands of spring types including Custom designs are normally considered when
the Innovative LeeP™ high performance plastic either the performance required or physical size and
composite springs, Bantam™ Mini compression springs, configuration exceed the scope available from our
Lite Pressure™ and High Pressure compression springs. comprehensive stock range.
Our complete portfolio includes Compression, Die, Our specialist design engineers have a wealth of spring
Extension and Wave springs in addition to Belleville experience and can provide expert consultancy for any
Washers and numerous Speciality springs. specific project, from start to finish.
All stock products are available for despatch within On page 208 you will find a glossary to help specify a
24 hours. spring to match your application. Starting on page 198
there are specification forms for compression, extension,
torsion, conical, swivel hook, drawbar, constant force
SPRING KITS and wave springs.
Formulated with research and development engineers, Our dedicated customer service and technical teams are
technicians and maintenance engineers in mind, our always on hand to help you find the right solution for
spring kits comprise a selection of different sizes and are your specific application.
available for standard compression, extension, torsion
and instrument springs.
4 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
QUALITY MANAGEMENT SPRING MATERIALS
ISO 9001
Our quality system meets Lee Spring Stock Springs are manufactured using
BUREAU VERITAS
Certification
the requirements of materials to military, aerospace and/or equivalent
Nº 5692 BS EN ISO 9001-2008 British or DIN standards.
– Certificate No. 5692.
• M
usic Wire Standard & Oil Tempered – zinc plated and
Lee Spring is also ROHS COMPLIANT fully de-embrittled
and REACH compliant
• S
tainless Steel Type 302 – passivated to optimise
corrosion resistance
Material Traceability is a standard procedure on all
• S
tainless Steel Type 316 – Excellent corrosion
orders, regardless of quantity. Batch codes are fixed
resistance in chloride environments, purity levels are
to all packages prior to despatch. A Certificate of
higher and colour more consistent. Ultrasonically
Conformity is issued free with every packing note.
cleaned and passivated to offer medical and food
Additional copies are charged at £10.00 (€13.00) per
grade cleanliness.
copy, per spring type.
• L eeP™ Plastic Composite Springs – Manufactured in
Ultem* PEI resin making them inert and
CUSTOMER SERVICE non-magnetic. High strength to weight rations,
optimising performance and reducing mass.
Whatever your requirements; springs for repair or Excellent stability of physical and mechanical
maintenance, development work or batch production, properties at elevated temperatures, corrosion
our trained telephone sales staff will help you select resistant, low flammability, toxicity and recyclable.
springs from this catalogue.
• B
antam™ Mini Springs – feature a wire diameter size
We can accept credit card transactions and open of 0.102 mm – just slightly thicker than a human hair.
accounts for new customers immediately. Manufactured in Elgiloy, a cobalt-chromium nickel
alloy known for its high strength.
Whether you are ordering ten springs or millions,
we welcome every enquiry and each order receives Custom Spring designs can employ a range of Nickel
the same professional service. and Cobalt alloys including -
Inconel 600, 718 and X-750, Nimonic 90, Hastelloy C-276,
Monel 400, Monel K-500. Other available alloys are
Stainless Steel 17-7 and 316, Phosphor Bronze,
Beryllium Copper.
* Ultem resin is produced by SABIC innovation Plastics, a
leader in engineering thermoplastic material solutions.
ORDER ONLINE
Order springs online at www.leespring.com or www.leespring.co.uk.
Via our website you can also access a vast engineering database that
will help you calculate spring characteristics and select types to meet
specific performance and application criteria.
When you have selected a spring full technical details, including
dimensions and loads can be accessed along with price information.
Users can view and manipulate stock spring images and download 3D
or 2D CAD models in all major platforms or view and save images as
.jpg or .tiff files.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 5
Benefit from the Lee Spring Difference
Lee Spring Europe offers Plating
around 20,000 stock springs On all music wire stock springs
Passivation
On 302, 316 & 17-7 stainless steel stock springs
Certificate of compliance
On all stock springs
Comprehensive website
with on-line ordering
FREE postage to many locations
On stock spring designs
6 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
G U I D E T O L E E S P R I N G PA R T N U M B E R S
LEEP™ PLASTIC COMPOSITE SPRINGS ––––––––––––––––––––––––––––––––––––––––––––––––––––––––– pg.9
LEEP™ SPRING LL 038 050 U10G
HOLE DIAMETER CODE
FREE LENGTH CODE MATERIAL CODE
COMPRESSION SPRINGS –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– pg.12
Series
BANTAM MINI SERIES (Inch)
INSTRUMENT SERIES (Inch)
CB
CI
SERIES CI 006 A 01 M MATERIAL CODE
Torsion SERIES (Metric, Left Wind) LTML DIRECTION OF WIND SERIES NUMBER
Torsion SERIES (Metric, Right Wind) LTMR L = LEFT WIND, R = RIGHT WIND
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 7
SPRING SELECTION KITS
Kit No. SK 250 Compression springs music wire containing approx. 300 springs Compact spring kits
Kit No. SK 251 Compression springs in stainless steel containing approx. 300 springs
Kit No. SK 350 Extension springs in music wire containing approx. 300 springs
Kit No. SK 351 Extension springs in stainless steel containing approx. 250 springs
Designed for those moments when engineers need a spring immediately to solve a problem or test a prototype, these
Compact Spring Kits offer a selection of compression and extension springs in a range of sizes and materials.
Each box contains a choice of springs to suit research and development, servicing, repairs or maintenance; at work or at
home for workshop or garage.
8 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
LeeP™ PLASTIC COMPOSITE SPRINGS
Guide to using tables
Colour Outside Diameter Inside Diameter Load at Solid Height Spring Rate Price Group
spring strength. arranged through the nominal dimension. the load or force required change in load or force reference to the
pages in ascending to bring all the coils per unit of deflection. price list.
order of size. into contact.
SI. No LEE COLOUR TO WORK IN OUTSIDE TO WORK OVER INSIDE MATERIAL THICKNESS X APPROXIMATE NOMINAL SPRING RATE APPROXIMATE DIRECTION PRICE
STOCK HOLE DIAMETER MIN. DIAMETER ROD DIAMETER MAX. DIAMETER RADIAL WALL LOAD AT SOLID HEIGHT FREE LENGTH SOLID HEIGHT OF WIND GROUP
NUMBER
MM IN MM IN MM IN MM IN MM IN N LB MM IN N/MM LB/IN MM IN
1 LL 038 038 U000 Red 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 4.41 0.99 9.53 0.375 0.65 3.70 2.74 0.108 Left AM
2 LL 038 038 U10G Orange 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 6.67 1.50 9.53 0.375 0.98 5.59 2.74 0.108 Left AM
3 LL 038 038 U20G Yellow 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 7.28 1.64 9.53 0.375 1.07 6.11 2.74 0.108 Left AM
4 LL 038 038 U30G Green 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 8.06 1.81 9.53 0.375 1.18 6.76 2.74 0.108 Left AM
5 LL 038 038 U36G Blue 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 8.64 1.94 9.53 0.375 1.27 7.25 2.74 0.108 Left AM
6 LL 038 038 U40G Violet 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 9.08 2.04 9.53 0.375 1.33 7.62 2.74 0.108 Left AM
7 LL 038 050 U000 Red 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 4.41 0.99 12.70 0.500 0.46 2.65 3.22 0.127 Left AM
8 LL 038 050 U10G Orange 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 6.67 1.50 12.70 0.500 0.70 4.00 3.22 0.127 Left AM
9 LL 038 050 U20G Yellow 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 7.28 1.64 12.70 0.500 0.77 4.37 3.22 0.127 Left AM
10 LL 038 050 U30G Green 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 8.06 1.81 12.70 0.500 0.85 4.84 3.22 0.127 Left AM
11 LL 038 050 U36G Blue 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 8.64 1.94 12.70 0.500 0.91 5.19 3.22 0.127 Left AM
12 LL 038 050 U40G Violet 9.53 0.375 8.89 0.350 3.81 0.150 4.72 0.186 0.76 X 2.08 .030 X .082 9.08 2.04 12.70 0.500 0.96 5.46 3.22 0.127 Left AM
13 LL 050 050 U000 Red 12.70 0.500 12.32 0.485 5.54 0.218 6.63 0.261 1.07 X 2.84 .042 X .112 8.48 1.91 12.70 0.500 0.95 5.40 3.75 0.148 Right AM
14 LL 050 050 U10G Orange 12.70 0.500 12.32 0.485 5.54 0.218 6.63 0.261 1.07 X 2.84 .042 X .112 12.82 2.88 12.70 0.500 1.43 8.16 3.75 0.148 Right AM
15 LL 050 050 U20G Yellow 12.70 0.500 12.32 0.485 5.54 0.218 6.63 0.261 1.07 X 2.84 .042 X .112 14.00 3.15 12.70 0.500 1.56 8.91 3.75 0.148 Right AM
16 LL 050 050 U30G Green 12.70 0.500 12.32 0.485 5.54 0.218 6.63 0.261 1.07 X 2.84 .042 X .112 15.50 3.48 12.70 0.500 1.73 9.87 3.75 0.148 Right AM
17 LL 050 050 U36G Blue 12.70 0.500 12.32 0.485 5.54 0.218 6.63 0.261 1.07 X 2.84 .042 X .112 16.61 3.73 12.70 0.500 1.85 10.57 3.75 0.148 Right AM
18 LL 050 050 U40G Violet 12.70 0.500 12.32 0.485 5.54 0.218 6.63 0.261 1.07 X 2.84 .042 X .112 17.47 3.93 12.70 0.500 1.95 11.12 3.75 0.148 Right AM
19 LL 050 075 U000 Red 12.70 0.500 11.94 0.470 5.54 0.218 6.25 0.246 1.07 X 2.84 .042 X .112 8.83 1.99 19.05 0.750 0.62 3.56 4.91 0.193 Left AP
20 LL 050 075 U10G Orange 12.70 0.500 11.94 0.470 5.54 0.218 6.25 0.246 1.07 X 2.84 .042 X .112 13.36 3.00 19.05 0.750 0.94 5.38 4.91 0.193 Left AP
21 LL 050 075 U20G Yellow 12.70 0.500 11.94 0.470 5.54 0.218 6.25 0.246 1.07 X 2.84 .042 X .112 14.59 3.28 19.05 0.750 1.03 5.88 4.91 0.193 Left AP
22 LL 050 075 U30G Green 12.70 0.500 11.94 0.470 5.54 0.218 6.25 0.246 1.07 X 2.84 .042 X .112 16.15 3.63 19.05 0.750 1.14 6.50 4.91 0.193 Left AP
23 LL 050 075 U36G Blue 12.70 0.500 11.94 0.470 5.54 0.218 6.25 0.246 1.07 X 2.84 .042 X .112 17.31 3.89 19.05 0.750 1.22 6.97 4.91 0.193 Left AP
24 LL 050 075 U40G Violet 12.70 0.500 11.94 0.470 5.54 0.218 6.25 0.246 1.07 X 2.84 .042 X .112 18.20 4.09 19.05 0.750 1.28 7.33 4.91 0.193 Left AP
25 LL 075 075 U000 Red 19.05 0.750 18.29 0.720 8.71 0.343 9.55 0.376 1.57 X 4.37 .062 X .172 19.31 4.34 19.05 0.750 1.43 8.18 5.61 0.221 Right AN
Lee Stock 26
27
Minimum Hole
LL 075 075 U10G
LL 075 075 U20G
Orange
Yellow
19.05
19.05
0.750
0.750
18.29
18.29
Maximum Rod Diameter
0.720
0.720
8.71
8.71
0.343
0.343
9.55
9.55
0.376
0.376
Material Thickness
1.57 X 4.37
1.57 X 4.37
.062 X .172
.062 X .172
29.20
31.89
6.56
7.17
19.05
19.05
Free Length
0.750
0.750
2.17
2.37
12.37
13.51
5.61
5.61
0.221
0.221
Solid Height
Right
Right
AN
AN
28 LL 075 075 U30G Green 19.05 0.750 18.29 0.720 8.71 0.343 9.55 0.376 1.57 X 4.37 .062 X .172 35.31 7.94 19.05 0.750 2.62 14.96 5.61 0.221 Right AN
Number 29
30
LL 075 075 U36G
LL 075 075 U40G Diameter
Blue
Violet
19.05
19.05
0.750
0.750
18.29
18.29
0.720
0.720 over which the spring will
8.71
8.71
0.343
0.343
9.55
9.55
0.376
0.376 x Radial Wall
1.57 X 4.37
1.57 X 4.37
.062 X .172
.062 X .172
37.84
39.79
8.50
8.94
19.05
19.05 the overall length of
0.750
0.750
2.81
2.95
16.03
16.85
5.61
5.61
0.221
0.221 length when
Right
Right
AN
AN
31 LL 075 100 U000 Red 19.05 0.750 18.29 0.720 8.71 0.343 9.55 0.376 1.57 X 4.37 .062 X .172 19.31 4.34 25.40 1.000 1.02 5.85 6.59 0.259 Right AP
32 LL 075 100 U10G Orange 19.05 0.750 18.29 0.720 8.71 0.343 9.55 0.376 1.57 X 4.37 .062 X .172 29.20 6.56 25.40 1.000 1.55 8.84 6.59 0.259 Right AP
ordering 33
34
required for the effective
LL 075 100 U20G
LL 075 100 U30G
Yellow
Green
19.05
19.05
0.750
0.750
18.29
18.29
effectively operate, allowing
0.720
0.720
8.71
8.71
0.343
0.343
9.55
9.55
0.376
0.376
nominal dimensions.
1.57 X 4.37
1.57 X 4.37
.062 X .172
.062 X .172
31.89
35.31
7.17
7.94
25.40
25.40
the spring in the
1.000
1.000
1.69
1.87
9.66
10.69
6.59
6.59
0.259
0.259
fully compressed.
Right
Right
AP
AP
35 LL 075 100 U36G Blue 19.05 0.750 18.29 0.720 8.71 0.343 9.55 0.376 1.57 X 4.37 .062 X .172 37.84 8.50 25.40 1.000 2.01 11.45 6.59 0.259 Right AP
reference.36
37 operation of the spring,
LL 075 100 U40G
LL 100 100 U000
Violet
Red
19.05
25.40
0.750
1.000
18.29
24.51
0.720
0.965
for working conditions and
8.71
11.91
0.343
0.469
9.55
12.83
0.376
0.505
1.57 X 4.37
2.16 X 5.84
.062 X .172
.085 X .230
39.79
36.19
8.94
8.13
25.40
25.40
unloaded position.
1.000
1.000
2.11
2.04
12.04
11.64
6.59
7.70
0.259
0.303
Right
Right
AP
AP
38 LL 100 100 U10G Orange 25.40 1.000 24.51 0.965 11.91 0.469 12.83 0.505 2.16 X 5.84 .085 X .230 54.72 12.30 25.40 1.000 3.08 17.60 7.70 0.303 Right AP[
39
40 allowing for manufacturing
LL 100 100 U20G
LL 100 100 U30G
Yellow
Green
25.40
25.40
1.000
1.000
24.51
24.51
0.965
0.965manufacturing tolerances.
11.91
11.91
0.469
0.469
12.83
12.83
0.505
0.505
2.16 X 5.84
2.16 X 5.84
.085 X .230
.085 X .230
59.77
66.17
13.43
14.87
25.40
25.40
1.000
1.000
3.37
3.73
19.23
21.28
7.70
7.70
0.303
0.303
Right
Right
AP
AP
41 LL 100 100 U36G Blue 25.40 1.000 24.51 0.965 11.91 0.469 12.83 0.505 2.16 X 5.84 .085 X .230 70.90 15.93 25.40 1.000 4.00 22.81 7.70 0.303 Right AP
42 LL 100 100 U40G Violet 25.40 1.000 24.51 0.965 11.91 0.469 12.83 0.505 2.16 X 5.84 .085 X .230 74.56 16.76 25.40 1.000 4.20 23.98 7.70 0.303 Right AP
43
44
tolerances and normal
LL 100 125 U000
LL 100 125 U10G
Red
Orange
25.40
25.40
1.000
1.000
24.51
24.51
0.965
0.965
11.91
11.91
0.469
0.469
12.83
12.83
0.505
0.505
2.16 X 5.84
2.16 X 5.84
.085 X .230
.085 X .230
36.19
54.72
8.13
12.30
31.75
31.75
1.250
1.250
1.57
2.37
8.95
13.53
8.72
8.72
0.343
0.343
Right
Right
AQ
AQ
45 LL 100 125 U20G Yellow 25.40 1.000 24.51 0.965 11.91 0.469 12.83 0.505 2.16 X 5.84 .085 X .230 59.77 13.43 31.75 1.250 2.59 14.78 8.72 0.343 Right AQ
46
47 working conditions.
LL 100 125 U30G
LL 100 125 U36G
Green
Blue
25.40
25.40
1.000
1.000
24.51
24.51
0.965
0.965
11.91
11.91
0.469
0.469
12.83
12.83
0.505
0.505
2.16 X 5.84
2.16 X 5.84
.085 X .230
.085 X .230
66.17
70.90
14.87
15.93
31.75
31.75
1.250
1.250
2.87
3.07
16.36
17.53
8.72
8.72
0.343
0.343
Right
Right
AQ
AQ
48 LL 100 125 U40G Violet 25.40 1.000 24.51 0.965 11.91 0.469 12.83 0.505 2.16 X 5.84 .085 X .230 74.56 16.76 31.75 1.250 3.23 18.43 8.72 0.343 Right AQ
Additional Information
1 LeeP™ plastic composite compression springs combine the strength of metal with the special attributes of
high performance engineered thermoplastics.
2 Manufactured in Ultem* PEI (polyetherimide) resin. Different formulations are designed to meet or exceed
*Ultem resin is produced by SABIC Innovative Plastics, a leader in engineered thermoplastic material solutions
*Ultem resin is produced by SABIC Innovative Plastics, a leader in engineered thermoplastic material solutions
performance criteria.
6 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 7
3 Benefits include:
• Unique patent pending designs that maximise spring rates and cycle life, while minimizing solid height
• High strength to weight ratios that optimise performance while reducing mass
• Excellent stability of physical and mechanical properties at elevated temperatures up to 170°C (340°F)
• High corrosion resistance and compatibility with many chemicals including strong acids, weak bases,
aromatics, and ketones
• Non-magnetic. Does not interfere with imaging and other ferro-sensitive technologies
• Dielectric insulation. Suitable for non-conductive applications
• Inert, non-contaminating material protects product purity
• Low flammability and toxicity ensure environmental safety
• Recyclable and compliant with global regulations including RoHS and REACH
4 LeeP™ plastic composite springs are available in a variety of standard sizes and six colour coded strengths:
red, orange, yellow, green, blue and violet, the strongest.
*Ultem resin is produced by SABIC Innovative Plastics, a leader in engineered thermoplastic material solutions.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 9
LeeP™ PLASTIC COMPOSITE SPRINGS
● Ultem* PEI (polyetherimide) resin
*Ultem resin is produced by SABIC Innovative Plastics, a leader in engineered thermoplastic material solutions
10 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
LeeP™ PLASTIC COMPOSITE SPRINGS
● Ultem* PEI (polyetherimide) resin
MM IN N LB MM IN N/MM LB/IN MM IN
0.76 X 2.08 .030 X .082 4.41 0.99 9.53 0.375 0.65 3.70 2.74 0.108 BN
6.67 1.50 9.53 0.375 0.98 5.59
7.28 1.64 9.53 0.375 1.07 6.11
8.06 1.81 9.53 0.375 1.18 6.76
8.64 1.94 9.53 0.375 1.27 7.25
9.08 2.04 9.53 0.375 1.33 7.62
4.41 0.99 12.70 0.500 0.46 2.65 3.22 0.127 BP
6.67 1.50 12.70 0.500 0.70 4.00
7.28 1.64 12.70 0.500 0.77 4.37
8.06 1.81 12.70 0.500 0.85 4.84
8.64 1.94 12.70 0.500 0.91 5.19
9.08 2.04 12.70 0.500 0.96 5.46
1.07 X 2.84 .042 X .112 8.48 1.91 12.70 0.500 0.95 5.40 3.75 0.148 BP
12.82 2.88 12.70 0.500 1.43 8.16
14.00 3.15 12.70 0.500 1.56 8.91
15.50 3.48 12.70 0.500 1.73 9.87
16.61 3.73 12.70 0.500 1.85 10.57
17.47 3.93 12.70 0.500 1.95 11.12
8.83 1.99 19.05 0.750 0.62 3.56 4.91 0.193 BU
13.36 3.00 19.05 0.750 0.94 5.38
14.59 3.28 19.05 0.750 1.03 5.88
16.15 3.63 19.05 0.750 1.14 6.50
17.31 3.89 19.05 0.750 1.22 6.97
18.20 4.09 19.05 0.750 1.28 7.33
1.57 X 4.37 .062 X .172 19.31 4.34 19.05 0.750 1.43 8.18 5.61 0.221 BS
29.20 6.56 19.05 0.750 2.17 12.37
31.89 7.17 19.05 0.750 2.37 13.51
35.31 7.94 19.05 0.750 2.62 14.96
37.84 8.50 19.05 0.750 2.81 16.03
39.79 8.94 19.05 0.750 2.95 16.85
19.31 4.34 25.40 1.000 1.02 5.85 6.59 0.259 BU
29.20 6.56 25.40 1.000 1.55 8.84
31.89 7.17 25.40 1.000 1.69 9.66
35.31 7.94 25.40 1.000 1.87 10.69
37.84 8.50 25.40 1.000 2.01 11.45
39.79 8.94 25.40 1.000 2.11 12.04
2.16 X 5.84 .085 X .230 36.19 8.13 25.40 1.000 2.04 11.64 7.70 0.303 BU
54.72 12.30 25.40 1.000 3.08 17.60
59.77 13.43 25.40 1.000 3.37 19.23
66.17 14.87 25.40 1.000 3.73 21.28
70.90 15.93 25.40 1.000 4.00 22.81
74.56 16.76 25.40 1.000 4.20 23.98
36.19 8.13 31.75 1.250 1.57 8.95 8.72 0.343 BV
54.72 12.30 31.75 1.250 2.37 13.53
59.77 13.43 31.75 1.250 2.59 14.78
66.17 14.87 31.75 1.250 2.87 16.36
70.90 15.93 31.75 1.250 3.07 17.53
74.56 16.76 31.75 1.250 3.23 18.43
*Ultem resin is produced by SABIC Innovative Plastics, a leader in engineered thermoplastic material solutions
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 11
L e eBPA™N TA
P LM
A S™T I C
s pCr O
i nM
gPsO S I T E S P R I N G S
Guide to using tables
● Ultem* PEI (polyetherimide) resin
Wire Diameter
Load at Solid Height
in ascending order of
the load or force required
size, within each group of
to bring all coils into contact
outside diameters.
Free Length
B A N TA M S P R I N G S the overall length of
Solid Height
CB0040B 03 E 1.02 .040 1.19 .047 .10 .0040 .464 .104 5.08 0.200 0.126 0.72 1.40 0.055 R
CB0040B 04 E 1.02 .040 1.19 .047 .10 .0040 .464 .104 6.35 0.250 0.099 0.57 1.68 0.066 R
CB0040B 05 E 1.02 .040 1.19 .047 .10 .0040 .464 .104 7.62 0.300 0.082 0.47 1.98 0.078 R
CB0040B 06 E
CB0040B 07 E
1.02
1.02
.040
.040
1.19
1.19
.047
.047
.10
.10
.0040
.0040
.464
.464
.104
.104
8.89
10.16
0.350
0.400
0.070
0.061
0.40
0.35
2.26
2.54
0.089
0.100
S
S
Length when fully compressed.
CB0040B 08 E 1.02 .040 1.19 .047 .10 .0040 .464 .104 11.43 0.450 0.054 0.31 2.84 0.112 S
CB0040B 09 E 1.02 .040 1.19 .047 .10 .0040 .464 .104 12.70 0.500 0.049 0.28 3.12 0.123 S
CB0045B 01 E 1.02 .040 1.19 .047 .11 .0045 .670 .151 2.54 0.100 0.422 2.41 0.94 0.037 R
CB0045B 02 E 1.02 .040 1.19 .047 .11 .0045 .670 .151 3.81 0.150 0.267 1.53 1.30 0.051 R
CB0045B 03 E 1.02 .040 1.19 .047 .11 .0045 .670 .151 5.08 0.200 0.196 1.12 1.65 0.065 R
CB0045B 04 E 1.02 .040 1.19 .047 .11 .0045 .670 .151 6.35 0.250 0.154 0.88 2.01 0.079 R
CB0045B 05 E 1.02 .040 1.19 .047 .11 .0045 .670 .151 7.62 0.300 0.127 0.73 2.36 0.093 R
CB0045B 06 E 1.02 .040 1.19 .047 .11 .0045 .670 .151 8.89 0.350 0.108 0.62 2.72 0.107 S
CB0045B 07 E 1.02 .040 1.19 .047 .11 .0045 .670 .151 10.16 0.400 0.094 0.54 3.07 0.121 S
CB0045B 08 E
CB0045B 09 E
1.02
1.02
.040
.040
1.19
1.19
.047
.047
.11
.11
.0045
.0045
.670
.670
.151
.151
11.43
12.70
0.450
0.500
0.084
0.075
0.48
0.43
3.40
3.76
0.134
0.148
S
S Spring Rate
CB0050B 01 E 1.02 .040 1.19 .047 .13 .0050 .932 .210 2.54 0.100 0.642 3.67 1.09 0.043 R
CB0050B 02 E
CB0050B 03 E
1.02
1.02
.040
.040
1.19
1.19
.047
.047
.13
.13
.0050
.0050
.932
.932
.210
.210
3.81
5.08
0.150
0.200
0.404
0.295
2.31
1.68
1.50
1.93
0.059
0.076
R
R
change in load or force per
CB0050B 04 E 1.02 .040 1.19 .047 .13 .0050 .932 .210 6.35 0.250 2.320 1.33 2.34 0.092 R
CB0050B 05 E
CB0050B 06 E
1.02
1.02
.040
.040
1.19
1.19
.047
.047
.13
.13
.0050
.0050
.932
.932
.210
.210
7.62
8.89
0.300
0.350
0.191
0.163
1.09
0.93
2.74
3.18
0.108
0.125
R
S
unit of deflection
CB0050B 07 E 1.02 .040 1.19 .047 .13 .0050 .932 .210 10.16 0.400 0.142 0.81 3.58 0.141 S
CB0050B 08 E 1.02 .040 1.19 .047 .13 .0050 .932 .210 11.43 0.450 0.125 0.72 3.99 0.157 S
CB0050B 09 E 1.02 .040 1.19 .047 .13 .0050 .932 .210 12.70 0.500 0.112 0.64 4.42 0.174 S
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 9
Additional Information
1 Bantam™ Mini compression springs combine impressive strength with corrosion resistance.
2 While our smallest Bantam™ Mini spring features a wire diameter size of 0.10 mm (0.0040”), just slightly
thicker than a human hair, the range extends up to 0.14 mm (0.0055”) in standard outside diameters of 0.64
mm (0.025”) to 1.65 mm (0.065”).
3 To meet the performance needs of a diverse range of applications these springs are manufactured in Elgiloy®, a
cobalt-chromium-nickel alloy known for its high strength. Elgiloy® is 10% stronger than Type 316 stainless steel
and exhibits superior corrosion resistance. In addition it performs well in temperatures up to 454°C (850°F) and
is non-magnetic.
*Ultem resin is produced by SABIC Innovative Plastics, a leader in engineered thermoplastic material solutions
12 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
B A N TA M ™ S P R I N G S
● Elgiloy® cobalt-chromium-nickel alloy
LEE OUTSIDE TO WORK IN HOLE NOMINAL WIRE APPROXIMATE LOAD NOMINAL FREE Spring Rate APPROXIMATE
STOCK DIAMETER DIAMETER MIN. DIAMETER AT SOLID HEIGHT LENGTH SOLID HEIGHT PRICE
NUMBER GROUP
MM IN MM IN MM IN N LB MM IN N/MM LB/IN MM IN
CB0040A 01 E 0.64 .025 0.81 .032 .10 .0040 .796 .179 1.27 0.050 1.537 8.78 0.76 0.030 R
CB0040A 02 E 1.91 0.075 0.927 5.30 1.04 0.041 R
CB0040A 03 E 2.54 0.100 0.664 3.79 1.35 0.053 R
CB0040A 04 E 3.18 0.125 0.517 2.95 1.63 0.064 R
CB0040A 05 E 3.81 0.150 0.423 2.42 1.93 0.076 R
CB0040A 06 E 4.45 0.175 0.358 2.05 2.24 0.088 S
CB0040A 07 E 5.08 0.200 0.311 1.77 2.51 0.099 S
CB0040A 08 E 5.72 0.225 0.274 1.57 2.82 0.111 S
CB0040A 09 E 6.35 0.250 0.245 1.40 3.10 0.122 S
CB0045A 01 E .11 .0045 1.161 .261 1.27 0.050 2.690 15.36 0.84 0.033 R
CB0045A 02 E 1.91 0.075 1.596 9.12 1.17 0.046 R
CB0045A 03 E 2.54 0.100 1.135 6.48 1.52 0.060 R
CB0045A 04 E 3.18 0.125 0.880 5.03 1.85 0.073 R
CB0045A 05 E 3.81 0.150 0.719 4.11 2.21 0.087 R
CB0045A 06 E 4.45 0.175 0.608 3.47 2.54 0.100 S
CB0045A 07 E 5.08 0.200 0.526 3.01 2.87 0.113 S
CB0045A 08 E 5.72 0.225 0.464 2.65 3.23 0.127 S
CB0045A 09 E 6.35 0.250 0.415 2.37 3.56 0.140 S
CB0050A 01 E .13 .0050 1.632 .367 1.27 0.050 4.570 26.10 0.91 0.036 R
CB0050A 02 E 1.91 0.075 2.666 15.23 1.30 0.051 R
CB0050A 03 E 2.54 0.100 1.882 10.75 1.68 0.066 R
CB0050A 04 E 3.18 0.125 1.454 8.31 2.06 0.081 R
CB0050A 05 E 3.81 0.150 1.185 6.77 2.44 0.096 R
CB0050A 06 E 4.45 0.175 1.000 5.71 2.82 0.111 S
CB0050A 07 E 5.08 0.200 0.865 4.94 3.20 0.126 S
CB0050A 08 E 5.72 0.225 0.762 4.35 3.58 0.141 S
CB0050A 09 E 6.35 0.250 0.681 3.89 3.96 0.156 S
CB0055A 01 E .14 .0055 2.228 .501 1.27 0.050 7.583 43.31 0.97 0.038 R
CB0055A 02 E 1.91 0.075 4.342 24.80 1.40 0.055 R
CB0055A 03 E 2.54 0.100 3.042 17.38 1.80 0.071 R
CB0055A 04 E 3.18 0.125 2.341 13.37 2.24 0.088 R
CB0055A 05 E 3.81 0.150 1.903 10.87 2.64 0.104 R
CB0055A 06 E 4.45 0.175 1.603 9.15 3.05 0.120 S
CB0055A 07 E 5.08 0.200 1.384 7.91 3.48 0.137 S
CB0055A 08 E 5.72 0.225 1.218 6.96 3.89 0.153 S
CB0055A 09 E 6.35 0.250 1.088 6.21 4.29 0.169 S
CBM0040A 01 E 0.81 .032 1.00 .039 .10 .0040 .600 .135 1.00 0.039 1.281 7.31 0.53 0.021 S
CBM0040A 02 E 2.00 0.079 0.525 3.00 0.86 0.034 S
CBM0040A 03 E 3.00 0.118 0.330 1.89 1.19 0.047 S
CBM0040A 04 E 4.00 0.157 0.241 1.38 1.50 0.059 S
CBM0040A 05 E 5.00 0.197 0.190 1.08 1.83 0.072 S
CBM0040A 06 E 6.00 0.236 0.156 0.89 2.16 0.085 S
CBM0040A 07 E 7.00 0.276 0.133 0.76 2.49 0.098 S
CBM0040A 08 E 8.00 0.315 0.116 0.66 2.82 0.111 S
CBM0040A 09 E 9.00 0.354 0.102 0.59 3.15 0.124 S
CBM0045A 01 E .11 .0045 .900 .202 1.00 0.039 2.210 12.62 0.58 0.023 S
CBM0045A 02 E 2.00 0.079 0.876 5.00 0.97 0.038 S
CBM0045A 03 E 3.00 0.118 0.546 3.12 1.35 0.053 S
CBM0045A 04 E 4.00 0.157 0.397 2.27 1.73 0.068 S
CBM0045A 05 E 5.00 0.197 0.312 1.78 2.11 0.083 S
CBM0045A 06 E 6.00 0.236 0.257 1.47 2.49 0.098 S
CBM0045A 07 E 7.00 0.276 0.218 1.25 2.87 0.113 S
CBM0045A 08 E 8.00 0.315 0.190 1.08 3.25 0.128 S
CBM0045A 09 E 9.00 0.354 0.168 0.96 3.63 0.143 S
CBM0050A 01 E .13 .0050 1.200 .270 1.00 0.039 3.535 20.19 0.66 0.026 S
CBM0050A 02 E 2.00 0.079 1.352 7.72 1.12 0.044 S
CBM0050A 03 E 3.00 0.118 0.836 4.77 1.57 0.062 S
CBM0050A 04 E 4.00 0.157 0.605 3.46 2.01 0.079 S
CBM0050A 05 E 5.00 0.197 0.474 2.71 2.46 0.097 S
CBM0050A 06 E 6.00 0.236 0.389 2.22 2.92 0.115 S
CBM0050A 07 E 7.00 0.276 0.331 1.89 3.38 0.133 S
CBM0050A 08 E 8.00 0.315 0.287 1.64 3.81 0.150 S
CBM0050A 09 E 9.00 0.354 0.254 1.45 4.27 0.168 S
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 13
B A N TA M ™ S P R I N G S
● Elgiloy® cobalt-chromium-nickel alloy
LEE OUTSIDE TO WORK IN HOLE NOMINAL WIRE APPROXIMATE LOAD NOMINAL FREE Spring Rate APPROXIMATE
STOCK DIAMETER DIAMETER MIN. DIAMETER AT SOLID HEIGHT LENGTH SOLID HEIGHT PRICE
NUMBER GROUP
MM IN MM IN MM IN N LB MM IN N/MM LB/IN MM IN
CBM0055A 01 E 0.81 .032 1.00 .039 .14 .0055 1.600 .360 1.00 0.039 5.654 32.29 0.71 0.028 S
CBM0055A 02 E 2.00 0.079 2.077 11.86 1.22 0.048 S
CBM0055A 03 E 3.00 0.118 1.272 7.27 1.75 0.069 S
CBM0055A 04 E 4.00 0.157 0.917 5.24 2.26 0.089 S
CBM0055A 05 E 5.00 0.197 0.717 4.09 2.77 0.109 S
CBM0055A 06 E 6.00 0.236 0.588 3.36 3.28 0.129 S
CBM0055A 07 E 7.00 0.276 0.499 2.85 3.78 0.149 S
CBM0055A 08 E 8.00 0.315 0.433 2.47 4.32 0.170 S
CBM0055A 09 E 9.00 0.354 0.383 2.19 4.83 0.190 S
CB0040B 01 E 1.02 .040 1.19 .047 .10 .0040 .463 .104 2.54 0.100 0.269 1.53 0.81 0.032 R
CB0040B 02 E 3.81 0.150 0.171 0.98 1.09 0.043 R
CB0040B 03 E 5.08 0.200 0.126 0.72 1.40 0.055 R
CB0040B 04 E 6.35 0.250 0.099 0.57 1.68 0.066 R
CB0040B 05 E 7.62 0.300 0.082 0.47 1.98 0.078 R
CB0040B 06 E 8.89 0.350 0.070 0.40 2.26 0.089 S
CB0040B 07 E 10.16 0.400 0.061 0.35 2.54 0.100 S
CB0040B 08 E 11.43 0.450 0.054 0.31 2.84 0.112 S
CB0040B 09 E 12.70 0.500 0.049 0.28 3.12 0.123 S
CB0045B 01 E .11 .0045 .672 .151 2.54 0.100 0.422 2.41 0.94 0.037 R
CB0045B 02 E 3.81 0.150 0.267 1.53 1.30 0.051 R
CB0045B 03 E 5.08 0.200 0.196 1.12 1.65 0.065 R
CB0045B 04 E 6.35 0.250 0.154 0.88 2.01 0.079 R
CB0045B 05 E 7.62 0.300 0.127 0.73 2.36 0.093 R
CB0045B 06 E 8.89 0.350 0.108 0.62 2.72 0.107 S
CB0045B 07 E 10.16 0.400 0.094 0.54 3.07 0.121 S
CB0045B 08 E 11.43 0.450 0.084 0.48 3.40 0.134 S
CB0045B 09 E 12.70 0.500 0.075 0.43 3.76 0.148 S
CB0050B 01 E .13 .0050 .934 .210 2.54 0.100 0.642 3.67 1.09 0.043 R
CB0050B 02 E 3.81 0.150 0.404 2.31 1.50 0.059 R
CB0050B 03 E 5.08 0.200 0.295 1.68 1.93 0.076 R
CB0050B 04 E 6.35 0.250 0.232 1.33 2.34 0.092 R
CB0050B 05 E 7.62 0.300 0.191 1.09 2.74 0.108 R
CB0050B 06 E 8.89 0.350 0.163 0.93 3.18 0.125 S
CB0050B 07 E 10.16 0.400 0.142 0.81 3.58 0.141 S
CB0050B 08 E 11.43 0.450 0.125 0.72 3.99 0.157 S
CB0050B 09 E 12.70 0.500 0.112 0.64 4.42 0.174 S
CB0055B 01 E .14 .0055 1.259 .283 2.54 0.100 0.953 5.44 1.22 0.048 R
CB0055B 02 E 3.81 0.150 0.596 3.41 1.70 0.067 R
CB0055B 03 E 5.08 0.200 0.434 2.48 2.18 0.086 R
CB0055B 04 E 6.35 0.250 0.341 1.95 2.67 0.105 R
CB0055B 05 E 7.62 0.300 0.281 1.60 3.15 0.124 R
CB0055B 06 E 8.89 0.350 0.239 1.36 3.61 0.142 S
CB0055B 07 E 10.16 0.400 0.207 1.19 4.09 0.161 S
CB0055B 08 E 11.43 0.450 0.184 1.05 4.57 0.180 S
CB0055B 09 E 12.70 0.500 0.165 0.94 5.05 0.199 S
CBM0040B 01 E 1.32 .052 1.50 .059 .10 .0040 .350 .079 2.00 0.079 0.241 1.38 0.53 0.021 S
CBM0040B 02 E 3.00 0.118 0.151 0.86 0.69 0.027 S
CBM0040B 03 E 4.00 0.157 0.110 0.63 0.84 0.033 S
CBM0040B 04 E 5.00 0.197 0.087 0.50 0.97 0.038 S
CBM0040B 05 E 6.00 0.236 0.072 0.41 1.12 0.044 S
CBM0040B 06 E 7.00 0.276 0.061 0.35 1.24 0.049 S
CBM0040B 07 E 8.00 0.315 0.053 0.30 1.40 0.055 S
CBM0040B 08 E 9.00 0.354 0.047 0.27 1.52 0.060 S
CBM0040B 09 E 10.00 0.394 0.042 0.24 1.68 0.066 S
CBM0045B 01 E .11 .0045 .500 .112 2.00 0.079 0.366 2.09 0.64 0.025 S
CBM0045B 02 E 3.00 0.118 0.229 1.31 0.81 0.032 S
CBM0045B 03 E 4.00 0.157 0.166 0.95 0.99 0.039 S
CBM0045B 04 E 5.00 0.197 0.130 0.74 1.17 0.046 S
CBM0045B 05 E 6.00 0.236 0.107 0.61 1.35 0.053 S
CBM0045B 06 E 7.00 0.276 0.091 0.52 1.52 0.060 S
CBM0045B 07 E 8.00 0.315 0.079 0.45 1.70 0.067 S
CBM0045B 08 E 9.00 0.354 0.070 0.40 1.88 0.074 S
CBM0045B 09 E 10.00 0.394 0.063 0.36 2.06 0.081 S
14 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
B A N TA M ™ S P R I N G S
● Elgiloy® cobalt-chromium-nickel alloy
LEE OUTSIDE TO WORK IN HOLE NOMINAL WIRE APPROXIMATE LOAD NOMINAL FREE Spring Rate APPROXIMATE
STOCK DIAMETER DIAMETER MIN. DIAMETER AT SOLID HEIGHT LENGTH SOLID HEIGHT PRICE
NUMBER GROUP
MM IN MM IN MM IN N LB MM IN N/MM LB/IN MM IN
CBM0050B 01 E 1.32 .052 1.50 .059 .13 .0050 .700 .157 2.00 0.079 0.548 3.13 0.71 0.028 S
CBM0050B 02 E 3.00 0.118 0.339 1.94 0.94 0.037 S
CBM0050B 03 E 4.00 0.157 0.245 1.40 1.14 0.045 S
CBM0050B 04 E 5.00 0.197 0.192 1.10 1.35 0.053 S
CBM0050B 05 E 6.00 0.236 0.158 0.90 1.57 0.062 S
CBM0050B 06 E 7.00 0.276 0.134 0.77 1.78 0.070 S
CBM0050B 07 E 8.00 0.315 0.116 0.67 1.98 0.078 S
CBM0050B 08 E 9.00 0.354 0.103 0.59 2.21 0.087 S
CBM0050B 09 E 10.00 0.394 0.092 0.53 2.41 0.095 S
CBM0055B 01 E .14 .0055 .950 .214 2.00 0.079 0.798 4.56 0.81 0.032 S
CBM0055B 02 E 3.00 0.118 0.489 2.79 1.07 0.042 S
CBM0055B 03 E 4.00 0.157 0.352 2.01 1.30 0.051 S
CBM0055B 04 E 5.00 0.197 0.275 1.57 1.55 0.061 S
CBM0055B 05 E 6.00 0.236 0.226 1.29 1.80 0.071 S
CBM0055B 06 E 7.00 0.276 0.192 1.10 2.06 0.081 S
CBM0055B 07 E 8.00 0.315 0.166 0.95 2.29 0.090 S
CBM0055B 08 E 9.00 0.354 0.147 0.84 2.54 0.100 S
CBM0055B 09 E 0.00 0.394 0.132 0.75 2.79 0.110 S
CB0040C 01 E 1.45 .057 1.60 .063 .10 .0040 .316 .071 3.18 0.125 0.125 0.71 0.66 0.026 R
CB0040C 02 E 4.78 0.188 0.080 0.46 0.84 0.033 R
CB0040C 03 E 6.35 0.250 0.059 0.34 1.02 0.040 R
CB0040C 04 E 7.95 0.313 0.047 0.27 1.22 0.048 R
CB0040C 05 E 9.53 0.375 0.039 0.22 1.40 0.055 R
CB0040C 06 E 11.13 0.438 0.033 0.19 1.60 0.063 S
CB0040C 07 E 12.70 0.500 0.029 0.17 1.78 0.070 S
CB0040C 08 E 14.30 0.563 0.026 0.15 1.98 0.078 S
CB0040C 09 E 15.88 0.625 0.023 0.13 2.16 0.085 S
CB0045C 01 E .11 .0045 .454 .102 3.18 0.125 0.188 1.07 0.76 0.030 R
CB0045C 02 E 4.78 0.188 0.120 0.69 1.02 0.040 R
CB0045C 03 E 6.35 0.250 0.089 0.51 1.24 0.049 R
CB0045C 04 E 7.95 0.313 0.070 0.40 1.47 0.058 R
CB0045C 05 E 9.53 0.375 0.058 0.33 1.70 0.067 R
CB0045C 06 E 11.13 0.438 0.049 0.28 1.96 0.077 S
CB0045C 07 E 12.70 0.500 0.043 0.25 2.18 0.086 S
CB0045C 08 E 14.30 0.563 0.038 0.22 2.41 0.095 S
CB0045C 09 E 15.88 0.625 0.034 0.20 2.67 0.105 S
CB0050C 01 E .13 .0050 .627 .141 3.18 0.125 0.274 1.57 0.89 0.035 R
CB0050C 02 E 4.78 0.188 0.174 1.00 1.17 0.046 R
CB0050C 03 E 6.35 0.250 0.128 0.73 1.45 0.057 R
CB0050C 04 E 7.95 0.313 0.101 0.58 1.75 0.069 R
CB0050C 05 E 9.53 0.375 0.084 0.48 2.03 0.080 R
CB0050C 06 E 11.13 0.438 0.071 0.41 2.31 0.091 S
CB0050C 07 E 12.70 0.500 0.062 0.36 2.62 0.103 S
CB0050C 08 E 14.30 0.563 0.055 0.31 2.90 0.114 S
CB0050C 09 E 15.88 0.625 0.049 0.28 3.18 0.125 S
CB0055C 01 E .14 .0055 .845 .190 3.18 0.125 0.389 2.22 1.02 0.040 R
CB0055C 02 E 4.78 0.188 0.246 1.41 1.35 0.053 R
CB0055C 03 E 6.35 0.250 0.181 1.03 1.68 0.066 R
CB0055C 04 E 7.95 0.313 0.142 0.81 2.03 0.080 R
CB0055C 05 E 9.53 0.375 0.118 0.67 2.36 0.093 R
CB0055C 06 E 11.13 0.438 0.100 0.57 2.72 0.107 S
CB0055C 07 E 12.70 0.500 0.087 0.50 3.05 0.120 S
CB0055C 08 E 14.30 0.563 0.077 0.44 3.38 0.133 S
CB0055C 09 E 15.88 0.625 0.069 0.40 3.73 0.147 S
CBM0040C 01 E 1.65 .065 1.80 .071 .10 .0040 .250 .056 3.00 0.118 0.103 0.59 0.58 0.023 S
CBM0040C 02 E 4.00 0.157 0.075 0.43 0.69 0.027 S
CBM0040C 03 E 5.00 0.197 0.059 0.34 0.79 0.031 S
CBM0040C 04 E 6.00 0.236 0.049 0.28 0.89 0.035 S
CBM0040C 05 E 7.00 0.276 0.041 0.24 0.99 0.039 S
CBM0040C 06 E 8.00 0.315 0.036 0.21 1.09 0.043 S
CBM0040C 07 E 9.00 0.354 0.032 0.18 1.19 0.047 S
CBM0040C 08 E 10.00 0.394 0.029 0.16 1.30 0.051 S
CBM0040C 09 E 12.00 0.472 0.024 0.14 1.50 0.059 S
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 15
B A N TA M ™ S P R I N G S
● Elgiloy® cobalt-chromium-nickel alloy
LEE OUTSIDE TO WORK IN HOLE NOMINAL WIRE APPROXIMATE LOAD NOMINAL FREE Spring Rate APPROXIMATE
STOCK DIAMETER DIAMETER MIN. DIAMETER AT SOLID HEIGHT LENGTH SOLID HEIGHT PRICE
NUMBER GROUP
MM IN MM IN MM IN N LB MM IN N/MM LB/IN MM IN
CBM0045C 01 E 1.65 .065 1.80 .071 .11 .0045 .400 .090 3.00 0.118 0.170 0.97 0.64 0.025 S
CBM0045C 02 E 4.00 0.157 0.124 0.71 0.76 0.030 S
CBM0045C 03 E 5.00 0.197 0.097 0.55 0.89 0.035 S
CBM0045C 04 E 6.00 0.236 0.080 0.46 0.99 0.039 S
CBM0045C 05 E 7.00 0.276 0.068 0.39 1.12 0.044 S
CBM0045C 06 E 8.00 0.315 0.059 0.34 1.22 0.048 S
CBM0045C 07 E 9.00 0.354 0.052 0.30 1.35 0.053 S
CBM0045C 08 E 10.00 0.394 0.047 0.27 1.45 0.057 S
CBM0045C 09 E 12.00 0.472 0.039 0.22 1.68 0.066 S
CBM0050C 01 E .13 .0050 .550 .124 3.00 0.118 0.244 1.40 0.76 0.030 S
CBM0050C 02 E 4.00 0.157 0.177 1.01 0.89 0.035 S
CBM0050C 03 E 5.00 0.197 0.139 0.79 1.04 0.041 S
CBM0050C 04 E 6.00 0.236 0.114 0.65 1.17 0.046 S
CBM0050C 05 E 7.00 0.276 0.097 0.55 1.32 0.052 S
CBM0050C 06 E 8.00 0.315 0.084 0.48 1.45 0.057 S
CBM0050C 07 E 9.00 0.354 0.074 0.42 1.60 0.063 S
CBM0050C 08 E 10.00 0.394 0.067 0.38 1.73 0.068 S
CBM0050C 09 E 12.00 0.472 0.055 0.32 2.01 0.079 S
CBM0055C 01 E .14 .0055 .700 .157 3.00 0.118 0.329 1.88 0.86 0.034 S
CBM0055C 02 E 4.00 0.157 0.237 1.35 1.04 0.041 S
CBM0055C 03 E 5.00 0.197 0.185 1.06 1.22 0.048 S
CBM0055C 04 E 6.00 0.236 0.152 0.87 1.40 0.055 S
CBM0055C 05 E 7.00 0.276 0.129 0.74 1.57 0.062 S
CBM0055C 06 E 8.00 0.315 0.112 0.64 1.75 0.069 S
CBM0055C 07 E 9.00 0.354 0.099 0.57 1.93 0.076 S
CBM0055C 08 E 10.00 0.394 0.089 0.51 2.11 0.083 S
CBM0055C 09 E 12.00 0.472 0.073 0.42 2.44 0.096 S
16 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
CO
COMPRESSIO N MS P R EI NS G
S ISO: NL ISTPER PI NR G
E SSS: ULRI TEE SPERREI ES SS U R E S E R I E S
effectively
MM operate,
IN allowing
MM IN MM IN MM IN in ascending
kPA PSI order ofN LB MM IN occurring
N/MM at 80%MM IN
LB/IN of S316
for working conditions and size, within each group of maximum available deflection.
manufacturing tolerances. outside diameters.
Load at Solid Height
the load or force required to
LITE PRESSURE™ COMPRESSION SPRINGS bring all the coils into contact.
● End Coils Closed ● Stainless Steel (Passivated. Ultrasonically Cleaned)
Lee Stock Number LEE
OUTSIDE
TO WORK TO WORK
WIRE PRESSURE @ LOAD AT FREE SPRING SOLID
PRICE GROUP
STOCK IN HOLE OVER ROD
DIAMETER DIAMETER 80% DEFLECTION SOLID HEIGHT LENGTH RATE HEIGHT S316
NUMBER DIA. MIN DIA. MAX.
ordering reference.
Stainless
Price Group
LP 008A 02 12.70 0.500 0.021 0.122 1.53 0.060 Q
LP 008A 03 15.88 0.625 0.017 0.097 1.77 0.070 Q
LP 008A 04 19.05 0.750 0.014 0.080 2.01 0.079 Q
LP 008A 05
LP 008A 06
25.40
31.75
1.000
1.250
0.011
0.008
0.060
0.047
2.49
2.98
0.098
0.117
Q
Q
reference to the price list
LP 010A 01 3.97 0.156 0.25 0.010 14 2 0.48 0.108 7.95 0.313 0.075 0.429 1.58 0.062 Q
LP 010A 02 12.70 0.500 0.045 0.258 2.13 0.084 Q
LP 010A 03 15.88 0.625 0.036 0.204 2.49 0.098 Q
LP 010A 04 19.05 0.750 0.030 0.169 2.85 0.112 Q
LP 010A 05 25.40 1.000 0.022 0.125 3.58 0.141 Q
LP 010A 06 31.75 1.250 0.018 0.100 4.31 0.170 Q
LP 011A 01 3.97 0.156 0.28 0.011 21 3 0.72 0.161 7.95 0.313 0.115 0.657 1.72 0.068 Q
LP 011A 02 12.70 0.500 0.069 0.394 2.30 0.091 Q Solid Height
LP 011A 03 15.88 0.625 0.054 0.311 2.69 0.106 Q
LP 011A 04 19.05 0.750 0.045 0.257 3.09 0.121 Q
Length when fully compressed.
Outside Diameter LP 011A 05
LP 011A 06
25.40
31.75
1.000
1.250
0.033
0.026
0.190
0.151
3.87
4.65
0.152
0.183
Q
Q
LP 012A 01 3.97 0.156 0.30 0.012 28 4 0.96 0.215 7.95 0.313 0.159 0.905 1.91 0.075 Q
arranged through the pages LP 012A 02 12.70 0.500 0.095 0.540 2.59 0.102 Q
LP 012A 03 15.88 0.625 0.074 0.425 3.04 0.120 Q
operation of the spring, allowing LP 010B 04 19.05 0.750 0.017 0.099 3.39 0.133 Q
LP 010B 05
LP 010B 06
25.40
31.75
1.000
1.250
0.013
0.010
0.074
0.059
4.30
5.21
0.169
0.205
R
R
Free Length
for manufacturing tolerances and LP 011B 01 4.76 0.188 0.28 0.011 14 2 0.55 0.123 7.95 0.313 0.087 0.498 1.69 0.067 Q
LP 011B 02
LP 011B 03
12.70
15.88
0.500
0.625
0.052
0.041
0.299
0.236
2.26
2.65
0.089
0.104
Q
Q
the overall length of
normal working conditions. LP 011B 04 19.05 0.750 0.034 0.195 3.03 0.119 Q
LP 011B 05 25.40 1.000 0.025 0.144 3.79 0.149 R the spring in the
LP 011B 06 31.75 1.250 0.020 0.115 4.55 0.179 R
LP 012B 01
LP 012B 02
4.76 0.188 0.30 0.012 21 3 0.82 0.184 7.95
12.70
0.313
0.500
0.133
0.079
0.759
0.453
1.79
2.39
0.071
0.094
Q
Q
unloaded position.
LP 012B 03 15.88 0.625 0.063 0.357 2.78 0.109 Q
LP 012B 04 19.05 0.750 0.052 0.295 3.18 0.125 Q
LP 012B 05 25.40 1.000 0.038 0.218 3.97 0.156 R
LP 012B 06 31.75 1.250 0.030 0.173 4.76 0.187 R
LP 013B 01 4.76 0.188 0.33 0.013 28 4 1.09 0.245 7.95 0.313 0.182 1.041 1.96 0.077 Q
LP 013B 02 12.70 0.500 0.108 0.618 2.62 0.103 Q
LP 013B 03 15.88 0.625 0.085 0.487 3.06 0.121 Q
LP 013B 04 19.05 0.750 0.070 0.401 3.50 0.138 Q
LP 013B 05 25.40 1.000 0.052 0.297 4.39 0.173 R
LP 013B 06 31.75 1.250 0.041 0.235 5.27 0.208 R
LP 014B 01 4.76 0.188 0.36 0.014 35 5 1.37 0.307 7.95 0.313 0.196 1.121 2.39 0.094 Q
LP 014B 02 12.70 0.500 0.116 0.663 3.30 0.130 Q
LP 014B 03 15.88 0.625 0.091 0.521 3.91 0.154 Q
LP 014B 04 19.05 0.750 0.075 0.429 4.52 0.178 Q
LP 014B 05 25.40 1.000 0.056 0.317 5.73 0.226 R
LP 014B 06 31.75 1.250 0.044 0.251 6.95 0.274 R
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 21
Additional Information
1 Load at Solid Height, Solid Height and Number of Coils are all given as approximate figures because during the
manufacturing process all material and engineering tolerances may result in the number of coils being adjusted,
to maintain the correct spring rate.
2 To find the load at any working length, when free length and spring rate are given, use the formula
F = S x ∆ L (where F is the load; S is the spring rate; ∆ L is the deflection from free length).
The surface area over the nominal hole diameter would be π times the diameter squared divided by 4.
The resultant pressure would then be determined by dividing the calculated load by the surface area.
3 It is general practice to avoid compressing springs to their solid height in order to achieve longer life.
Therefore we recommend that compression springs should not be compressed greater than
80% of their deflective capability - except on an occasional basis.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 17
COMPRESSION SPRINGS: LITE PRESSURE SERIES
18 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
COMPRESSION SPRINGS: LITE PRESSURE SERIES
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 19
COMPRESSION SPRINGS: LITE PRESSURE SERIES
20 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
COMPRESSION SPRINGS: LITE PRESSURE SERIES
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 21
COMPRESSION SPRINGS: LITE PRESSURE SERIES
22 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
COMPRESSION SPRINGS: LITE PRESSURE SERIES
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 23
COMPRESSION SPRINGS: LITE PRESSURE SERIES
24 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
COMPRESSION SPRINGS: LITE PRESSURE SERIES
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 25
COMPRESSION SPRINGS: LITE PRESSURE SERIES
26 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
COMPRESSION SPRINGS: LITE PRESSURE SERIES
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 27
COMPRESSION SPRINGS: LITE PRESSURE SERIES
28 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
COMPRESSION SPRINGS: LITE PRESSURE SERIES
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 29
COMPRESSION SPRINGS: LITE PRESSURE SERIES
30 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
COMPRESSION SPRINGS: LITE PRESSURE SERIES
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 31
COMPRESSION SPRINGS
Guide to using tables
Maximum Rod Diameter
Wire Diameter Load at Solid Height
over which the spring will
in ascending order of the load or force required
effectively operate, allowing
size, within each group of to bring all coils into contact
for working conditions and
outside diameters. (See note 5).
manufacturing tolerances.
Free Length
COMPRESSION SPRINGS the overall length of
Lee Stock Number ● End Coils Closed ● Music Wire (Plated) or Stainless Steel (Passivated) the spring in the
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL
Please add suffix M for Music STOCK
NUMBER
OUTSIDE
DIAMETER
IN HOLE
DIA. MIN
WIRE
DIAMETER
OVER ROD
DIA. MAX.
LOAD AT
SOLID HEIGHT
FREE
LENGTH
SPRING
RATE
APPROXIMATE
SOLID Music
PRICE GROUP
302 316 unloaded position.
HEIGHT Wire Stainless Stainless
CIM 020A 02
CIM 020A 03
5.00
7.50
0.197
0.295
0.11
0.07
6.07
3.87
2.59
3.72
0.102
0.146
C
C
D
D
SPECIAL
SPECIAL
in the S316 price group
in ascending order of size. CIM 020A 04 10.00 0.394 0.05 2.84 4.85 0.191 C D SPECIAL
CIM 020A 05 12.50 0.492 0.04 2.24 5.97 0.235 C D SPECIAL column means that springs
CIM 020A 06 15.00 0.591 0.03 1.85 7.10 0.279 C D SPECIAL
CIM 020A 07
CIM 025A 01 0.25 0.010 0.80 0.031 0.53 1.16
17.50
3.50
0.689
0.138
0.03
0.46
1.58
26.04
8.23
2.37
0.324
0.093
C
C
D
D
SPECIAL
SPECIAL
are available but as special
CIM 025A 02 5.00 0.197 0.30 16.82 3.25 0.128 C D SPECIAL
Minimum Hole Diameter CIM 025A 03 7.50 0.295 0.19 10.58 4.71 0.186 C D SPECIAL orders only.
CIM 025A 04 10.00 0.394 0.14 7.72 6.18 0.243 C D SPECIAL
required for the effective CIM 025A 06 15.00 0.591 0.09 5.01 9.11 0.359 C D SPECIAL
operation of the spring, allowing CIM 030A 01 0.30 0.120 0.70 0.027 0.94 2.07 3.50 0.138 1.19 66.46 2.71 0.107 D E SPECIAL
for manufacturing tolerances and CIM 030A 04 10.00 0.394 0.34 18.91 7.22 0.284 D E SPECIAL
SPECIAL
Solid Height
CIM 030A 05 12.50 0.492 0.26 14.83 8.95 0.352 D E
SPECIAL
normal working conditions. CIM 030A 06
CIM 030A 07
15.00
17.50
0.591
0.689
0.22
0.19
12.20
10.36
10.69
12.42
0.421
0.489
D
D
E
E SPECIAL Length when fully compressed.
CI 006A 01 1.45 0.057 1.59 0.063 0.15 0.006 0.99 0.039 1.33 0.30 3.18 0.125 0.67 3.80 1.04 0.041 C D H
CI 006A 02 4.76 0.188 0.42 2.40 1.37 0.054 C D H
CI 006A 03 6.35 0.250 0.32 1.80 1.68 0.066 C D H
CI 006A 04 7.94 0.313 0.25 1.40 2.06 0.081 C D H
CI 006A 05 9.53 0.375 0.19 1.10 2.44 0.096 C D H
CI 006A 06 11.11 0.438 0.18 1.00 2.74 0.108 C D H
CI 006A 07 12.70 0.500 0.16 0.90 3.05 0.120 C D H
CI 006A 08 14.29 0.563 0.12 0.70 3.91 0.154 C D H
CI 006A 09 15.88 0.625 0.11 0.60 4.42 0.174 C D H
CI 007A 01 0.18 0.007 0.94 0.037 2.22 0.50 3.18 0.125 1.21 6.90 1.30 0.051 C D H Spring Rate
CI 007A 02 4.76 0.188 0.72 4.10 1.78 0.070 C D H
CI 007A 03
CI 007A 04
6.35
7.94
0.250
0.313
0.53
0.42
3.00
2.40
2.29
2.67
0.090
0.105
C
C
D
D
H
H
change in load or force per
CI 007A 05 9.53 0.375 0.37 2.10 3.02 0.119 C D H
CI 007A 06 11.11 0.438 0.30 1.70 3.56 0.140 C D H unit of deflection
CI 007A 07 12.70 0.500 0.26 1.50 4.01 0.158 C D H
CI 007A 08
CI 007A 09
14.29
15.88
0.563
0.625
0.23
0.19
1.30
1.10
4.39
5.05
0.173
0.199
C
C
D
D
H
H
(See note 5).
36 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.lee
ADDITIONAL INFORMATION
1 Load at Solid Height, Solid Height and Number of Coils are all given as approximate figures because during the
manufacturing process all material and engineering tolerances may result in the number of coils being adjusted,
to maintain the correct spring rate.
2 To find the load at any working length, when free length and spring rate are given, use the formula
F = S x ∆L (where F is the load; S is the spring rate; ∆L is the deflection from free length).
3 It is general practice to avoid compressing springs to their solid height in order to achieve longer life
Therefore we recommend that compression springs should not be compressed greater than
80% of their deflective capability - except on an occasional basis.
5 Please note the spring rates at solid height and maximum load listed in the compression spring tables relate
only to music wire. When choosing stainless steel multiply factors by 0.833.
32 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
COMPRESSION SPRINGS: INSTRUMENT SERIES
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
CIM010ZA 01† 0.60 0.024 0.80 0.031 0.10 0.004 0.30 0.012 0.80 0.18 1.00 0.039 2.36 13.50 0.66 0.026 SPECIAL D SPECIAL
CIM010ZA 02† 1.40 0.055 1.50 8.59 0.84 0.033 SPECIAL D SPECIAL
CIM010ZA 03† 2.00 0.079 0.97 5.56 1.14 0.045 SPECIAL D SPECIAL
CIM010ZA 04† 2.70 0.106 0.66 3.78 1.55 0.061 SPECIAL D SPECIAL
CIM010ZA 05† 3.90 0.154 0.45 2.55 2.16 0.085 SPECIAL D SPECIAL
CIM010ZB 01† 0.73 0.029 0.90 0.035 0.10 0.004 0.40 0.016 0.62 0.14 1.20 0.047 1.18 6.75 0.66 0.026 SPECIAL D SPECIAL
CIM010ZB 02† 1.70 0.067 0.75 4.29 0.84 0.033 SPECIAL D SPECIAL
CIM010ZB 03† 2.40 0.094 0.49 2.78 1.14 0.045 SPECIAL D SPECIAL
CIM010ZB 04† 3.40 0.134 0.33 1.89 1.55 0.061 SPECIAL D SPECIAL
CIM010ZB 05† 4.90 0.193 0.22 1.28 2.16 0.085 SPECIAL D SPECIAL
CIM012ZC 01† 0.75 0.030 0.90 0.035 0.12 0.005 0.40 0.016 1.05 0.24 1.20 0.047 2.45 13.99 0.79 0.031 SPECIAL D SPECIAL
CIM012ZC 02† 1.70 0.067 1.56 8.90 1.02 0.040 SPECIAL D SPECIAL
CIM012ZC 03† 2.40 0.094 1.01 5.76 1.37 0.054 SPECIAL D SPECIAL
CIM012ZC 04† 3.40 0.134 0.69 3.92 1.85 0.073 SPECIAL D SPECIAL
CIM012ZC 05† 4.90 0.193 0.46 2.65 2.59 0.102 SPECIAL D SPECIAL
CIM010ZD 01† 0.90 0.035 1.10 0.043 0.10 0.004 0.50 0.020 0.49 0.11 1.50 0.059 0.58 3.30 0.66 0.026 SPECIAL D SPECIAL
CIM010ZD 02† 2.20 0.087 0.37 2.10 0.84 0.033 SPECIAL D SPECIAL
CIM010ZD 03† 3.20 0.126 0.24 1.36 1.14 0.045 SPECIAL D SPECIAL
CIM010ZD 04† 4.60 0.181 0.16 0.92 1.55 0.061 SPECIAL D SPECIAL
CIM010ZD 05† 6.60 0.260 0.11 0.62 2.16 0.085 SPECIAL D SPECIAL
CIM012ZE 01† 0.92 0.036 1.10 0.043 0.12 0.005 0.50 0.020 0.85 0.19 1.50 0.059 1.20 6.83 0.79 0.031 SPECIAL D SPECIAL
CIM012ZE 02† 2.10 0.083 0.76 4.35 1.02 0.040 SPECIAL D SPECIAL
CIM012ZE 03† 3.10 0.122 0.49 2.81 1.37 0.054 SPECIAL D SPECIAL
CIM012ZE 04† 4.40 0.173 0.33 1.91 1.85 0.073 SPECIAL D SPECIAL
CIM012ZE 05† 6.30 0.248 0.23 1.29 2.59 0.102 SPECIAL D SPECIAL
CIM016ZF 01† 0.96 0.038 1.20 0.047 0.16 0.006 0.40 0.016 2.02 0.45 1.60 0.063 3.78 21.60 1.04 0.041 SPECIAL D SPECIAL
CIM016ZF 02† 2.20 0.087 2.41 13.74 1.37 0.054 SPECIAL D SPECIAL
CIM016ZF 03† 3.10 0.122 1.56 8.89 1.83 0.072 SPECIAL D SPECIAL
CIM016ZF 04† 4.40 0.173 1.06 6.05 2.49 0.098 SPECIAL D SPECIAL
CIM016ZF 05† 6.20 0.244 0.72 4.09 3.43 0.135 SPECIAL D SPECIAL
CI 006AA 01 1.02 0.040 1.19 0.047 0.15 0.006 0.53 0.021 1.93 0.43 2.54 0.100 1.56 8.92 1.30 0.051 C D H
CI 006AA 02 3.81 0.150 0.97 5.54 1.83 0.072 C D H
CI 006AA 03 5.08 0.200 0.70 4.02 2.34 0.092 C D H
CI 006AA 04 6.35 0.250 0.55 3.15 2.84 0.112 C D H
CI 006AA 05 7.62 0.300 0.45 2.59 3.35 0.132 C D H
CI 006AA 06 8.89 0.350 0.39 2.20 3.89 0.153 C D H
CI 006AA 07 10.16 0.400 0.34 1.91 4.39 0.173 C D H
CI 006AA 08 11.43 0.450 0.30 1.69 4.90 0.193 C D H
CI 006AA 09 12.70 0.500 0.27 1.52 5.44 0.214 C D H
CI 007AA 01 0.18 0.007 0.48 0.019 3.16 0.71 2.54 0.100 3.13 17.88 1.52 0.060 C D H
CI 007AA 02 3.81 0.150 1.92 10.95 2.16 0.085 C D H
CI 007AA 03 5.08 0.200 1.38 7.89 2.79 0.110 C D H
CI 007AA 04 6.35 0.250 1.08 6.17 3.43 0.135 C D H
CI 007AA 05 7.62 0.300 0.89 5.06 4.06 0.160 C D H
CI 007AA 06 8.89 0.350 0.75 4.29 4.67 0.184 C D H
CI 007AA 07 10.16 0.400 0.65 3.73 5.31 0.209 C D H
CI 007AA 08 11.43 0.450 0.58 3.29 5.94 0.234 C D H
CI 007AA 09 12.70 0.500 0.52 2.95 6.58 0.259 C D H
CIM010ZG 01† 1.10 0.043 1.40 0.055 0.10 0.004 0.70 0.028 0.39 0.09 2.00 0.079 0.30 1.69 0.66 0.026 SPECIAL D SPECIAL
CIM010ZG 02† 2.90 0.114 0.19 1.07 0.84 0.033 SPECIAL D SPECIAL
CIM010ZG 03† 4.40 0.173 0.12 0.69 1.14 0.045 SPECIAL D SPECIAL
CIM010ZG 04† 6.30 0.248 0.08 0.47 1.55 0.061 SPECIAL D SPECIAL
CIM010ZG 05† 9.20 0.362 0.06 0.32 2.16 0.085 SPECIAL D SPECIAL
CIM012ZH 01† 1.12 0.044 1.40 0.055 0.12 0.005 0.60 0.024 0.67 0.15 1.90 0.075 0.61 3.50 0.79 0.031 SPECIAL D SPECIAL
CIM012ZH 02† 2.70 0.106 0.39 2.23 1.02 0.040 SPECIAL D SPECIAL
CIM012ZH 03† 4.00 0.157 0.25 1.44 1.37 0.054 SPECIAL D SPECIAL
CIM012ZH 04† 5.80 0.228 0.17 0.98 1.85 0.073 SPECIAL D SPECIAL
CIM012ZH 05† 8.40 0.331 0.12 0.66 2.59 0.102 SPECIAL D SPECIAL
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 33
COMPRESSION SPRINGS: INSTRUMENT SERIES
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
34 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
COMPRESSION SPRINGS: INSTRUMENT SERIES
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
CI 007A 01 1.45 0.057 1.60 0.063 0.18 0.007 0.97 0.038 2.22 0.50 3.18 0.125 1.21 6.90 1.30 0.051 C D H
CI 007A 02 4.78 0.188 0.72 4.10 1.78 0.070 C D H
CI 007A 03 6.35 0.250 0.53 3.00 2.29 0.090 C D H
CI 007A 04 7.95 0.313 0.42 2.40 2.67 0.105 C D H
CI 007A 05 9.53 0.375 0.37 2.10 3.02 0.119 C D H
CI 007A 06 11.13 0.438 0.30 1.70 3.56 0.140 C D H
CI 007A 07 12.70 0.500 0.26 1.50 4.01 0.158 C D H
CI 007A 08 14.30 0.563 0.23 1.30 4.39 0.173 C D H
CI 007A 09 15.88 0.625 0.19 1.10 5.05 0.199 C D H
CI 008A 01 0.20 0.008 0.91 0.036 3.56 0.80 3.18 0.125 2.03 11.60 1.52 0.060 C D H
CI 008A 02 4.78 0.188 1.33 7.60 2.03 0.080 C D H
CI 008A 03 6.35 0.250 0.91 5.20 2.64 0.104 C D H
CI 008A 04 7.95 0.313 0.70 4.00 3.25 0.128 C D H
CI 008A 05 9.53 0.375 0.60 3.40 3.76 0.148 C D H
CI 008A 06 11.13 0.438 0.49 2.80 4.37 0.172 C D H
CI 008A 07 12.70 0.500 0.42 2.40 4.98 0.196 C D H
CI 008A 08 14.30 0.563 0.39 2.20 5.33 0.210 C D H
CI 008A 09 15.88 0.625 0.35 2.00 6.17 0.243 C D H
CIM025ZP 01† 1.70 0.067 0.25 0.010 0.70 0.028 5.05 1.14 2.40 0.094 6.68 38.14 1.63 0.064 SPECIAL E SPECIAL
CIM025ZP 02† 3.30 0.130 4.25 24.27 2.13 0.084 SPECIAL E SPECIAL
CIM025ZP 03† 4.70 0.185 2.75 15.71 2.87 0.113 SPECIAL E SPECIAL
CIM025ZP 04† 6.60 0.260 1.87 10.68 3.89 0.153 SPECIAL E SPECIAL
CIM025ZP 05† 9.40 0.370 1.26 7.22 5.38 0.212 SPECIAL E SPECIAL
CI 007AB 01 1.59 0.063 1.98 0.078 0.18 0.007 1.12 0.044 1.89 0.43 3.18 0.125 0.96 5.48 1.19 0.047 C D H
CI 007AB 02 4.78 0.188 0.60 3.41 1.60 0.063 C D H
CI 007AB 03 6.35 0.250 0.44 2.49 2.01 0.079 C D H
CI 007AB 04 7.95 0.313 0.34 1.95 2.41 0.095 C D H
CI 007AB 05 9.53 0.375 0.28 1.61 2.79 0.110 C D H
CI 007AB 06 11.13 0.438 0.24 1.37 3.20 0.126 C D H
CI 007AB 07 12.70 0.500 0.21 1.19 3.61 0.142 C D H
CI 007AB 08 14.30 0.563 0.18 1.05 4.01 0.158 C D H
CI 007AB 09 15.88 0.625 0.17 0.94 4.39 0.173 C D H
CI 008AB 01 0.20 0.008 1.07 0.042 3.80 0.85 3.18 0.125 2.02 11.55 1.30 0.051 C D H
CI 008AB 02 4.78 0.188 1.25 7.11 1.71 0.068 C D H
CI 008AB 03 6.35 0.250 0.90 5.16 2.12 0.084 C D H
CI 008AB 04 7.95 0.313 0.71 4.04 2.54 0.100 C D H
CI 008AB 05 9.53 0.375 0.58 3.32 2.95 0.116 C D H
CI 008AB 06 11.13 0.438 0.49 2.82 3.37 0.133 C D H
CI 008AB 07 12.70 0.500 0.43 2.45 3.78 0.149 C D H
CI 008AB 08 14.30 0.563 0.38 2.16 4.20 0.165 C D H
CI 008AB 09 15.88 0.625 0.34 1.94 4.61 0.182 C D H
CI 009AB 01 0.23 0.009 1.02 0.040 4.18 0.94 3.18 0.125 2.68 15.32 1.63 0.064 C D H
CI 009AB 02 4.78 0.188 1.63 9.33 2.21 0.087 C D H
CI 009AB 03 6.35 0.250 1.18 6.73 2.82 0.111 C D H
CI 009AB 04 7.95 0.313 0.92 5.25 3.40 0.134 C D H
CI 009AB 05 9.53 0.375 0.76 4.31 3.99 0.157 C D H
CI 009AB 06 11.13 0.438 0.64 3.65 4.60 0.181 C D H
CI 009AB 07 12.70 0.500 0.56 3.17 5.18 0.204 C D H
CI 009AB 08 14.30 0.563 0.49 2.80 5.79 0.228 C D H
CI 009AB 09 15.88 0.625 0.44 2.51 6.38 0.251 C D H
CI 010AB 01 0.25 0.010 0.97 0.038 5.84 1.31 3.18 0.125 4.28 24.42 1.80 0.071 D E J
CI 010AB 02 4.78 0.188 2.57 14.68 2.51 0.099 D E J
CI 010AB 03 6.35 0.250 1.85 10.54 3.20 0.126 D E J
CI 010AB 04 7.95 0.313 1.44 8.20 3.89 0.153 D E J
CI 010AB 05 9.53 0.375 1.18 6.72 4.57 0.180 D E J
CI 010AB 06 11.13 0.438 1.00 5.69 5.26 0.207 D E J
CI 010AB 07 12.70 0.500 0.86 4.94 5.94 0.234 D E J
CI 010AB 08 14.30 0.563 0.76 4.35 6.63 0.261 D E J
CI 010AB 09 15.88 0.625 0.68 3.90 7.32 0.288 D E J
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 35
COMPRESSION SPRINGS: INSTRUMENT SERIES
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
36 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
COMPRESSION SPRINGS: INSTRUMENT SERIES
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
CI 008B 01 2.24 0.088 2.38 0.094 0.20 0.008 1.68 0.066 1.78 0.40 3.18 0.125 0.96 5.50 1.07 0.042 C D H
CI 008B 02 4.78 0.188 0.61 3.50 1.32 0.052 C D H
CI 008B 03 6.35 0.250 0.42 2.40 1.63 0.064 C D H
CI 008B 04 7.95 0.313 0.35 2.00 1.83 0.072 C D H
CI 008B 05 9.53 0.375 0.25 1.40 2.34 0.092 C D H
CI 008B 06 11.13 0.438 0.23 1.30 2.44 0.096 C D H
CI 008B 07 12.70 0.500 0.19 1.10 2.79 0.110 C D H
CI 008B 08 14.30 0.563 0.18 1.00 3.05 0.120 C D H
CI 008B 09 15.88 0.625 0.16 0.90 3.56 0.140 C D H
CI 008B 10 17.48 0.688 0.14 0.80 3.63 0.143 C D H
CI 008B 11 19.05 0.750 0.14 0.80 3.91 0.154 C D H
CI 010B 01 0.25 0.010 1.60 0.063 3.56 0.80 3.18 0.125 2.22 12.70 1.40 0.055 D E J
CI 010B 02 4.78 0.188 1.23 7.00 1.91 0.075 D E J
CI 010B 03 6.35 0.250 0.91 5.20 2.29 0.090 D E J
CI 010B 04 7.95 0.313 0.70 4.00 2.74 0.108 D E J
CI 010B 05 9.53 0.375 0.58 3.30 3.18 0.125 D E J
CI 010B 06 11.13 0.438 0.51 2.90 3.51 0.138 D E J
CI 010B 07 12.70 0.500 0.44 2.50 3.94 0.155 D E J
CI 010B 08 14.30 0.563 0.39 2.20 4.37 0.172 D E J
CI 010B 09 15.88 0.625 0.32 1.80 5.21 0.205 D E J
CI 010B 10 17.48 0.688 0.30 1.70 5.74 0.226 D E J
CI 010B 11 19.05 0.750 0.28 1.60 6.05 0.238 D E J
CI 010B 12 22.23 0.875 0.26 1.50 6.50 0.256 D E J
CI 010B 13 25.40 1.000 0.23 1.30 7.14 0.281 D E J
CI 012B 01 0.30 0.012 1.50 0.059 6.23 1.40 3.18 0.125 4.55 26.00 1.75 0.069 D E J
CI 012B 02 4.78 0.188 2.63 15.00 2.36 0.093 D E J
CI 012B 03 6.35 0.250 1.93 11.00 2.90 0.114 D E J
CI 012B 04 7.95 0.313 1.49 8.50 3.51 0.138 D E J
CI 012B 05 9.53 0.375 1.17 6.70 4.11 0.162 D E J
CI 012B 06 11.13 0.438 1.02 5.80 4.65 0.183 D E J
CI 012B 07 12.70 0.500 0.88 5.00 5.18 0.204 D E J
CI 012B 08 14.30 0.563 0.79 4.50 5.74 0.226 D E J
CI 012B 09 15.88 0.625 0.68 3.90 6.35 0.250 D E J
CI 012B 10 19.05 0.750 0.53 3.00 8.00 0.315 D E J
CI 012B 11 22.23 0.875 0.49 2.80 9.02 0.355 D E J
CI 012B 12 25.40 1.000 0.42 2.40 10.24 0.403 D E J
CIM025B 01 2.25 0.089 2.40 0.094 0.25 0.010 1.63 0.064 3.56 0.80 3.50 0.138 1.75 10.00 1.60 0.063 C D SPECIAL
CIM025B 02 5.00 0.197 1.12 6.40 2.01 0.079 C D SPECIAL
CIM025B 03 6.50 0.256 0.84 4.80 2.39 0.094 C D SPECIAL
CIM025B 04 8.00 0.315 0.67 3.80 2.79 0.110 C D SPECIAL
CIM025B 05 9.50 0.374 0.54 3.10 3.20 0.126 C D SPECIAL
CIM025B 06 11.00 0.433 0.47 2.70 3.61 0.142 C D SPECIAL
CIM025B 07 12.50 0.492 0.40 2.30 3.99 0.157 C D SPECIAL
CIM025B 08 14.00 0.551 0.37 2.10 4.45 0.175 C D SPECIAL
CIM025B 09 15.50 0.610 0.33 1.90 4.85 0.191 C D SPECIAL
CIM025B 10 17.00 0.669 0.30 1.70 5.26 0.207 C D SPECIAL
CIM025B 11 19.00 0.748 0.26 1.50 5.84 0.230 C D SPECIAL
CIM025BA 01† 2.60 0.102 0.25 0.010 1.50 0.059 3.05 0.69 3.70 0.146 1.44 8.24 1.63 0.064 SPECIAL E SPECIAL
CIM025BA 02† 5.50 0.217 0.92 5.24 2.13 0.084 SPECIAL E SPECIAL
CIM025BA 03† 8.00 0.315 0.59 3.39 2.87 0.113 SPECIAL E SPECIAL
CIM025BA 04† 11.40 0.449 0.40 2.31 3.89 0.153 SPECIAL E SPECIAL
CIM025BA 05† 16.60 0.654 0.27 1.56 5.38 0.212 SPECIAL E SPECIAL
CIM032BB 01† 2.32 0.091 2.60 0.102 0.32 0.013 1.40 0.055 6.38 1.44 3.70 0.146 3.87 22.12 2.08 0.082 SPECIAL E SPECIAL
CIM032BB 02† 5.30 0.209 2.46 14.07 2.72 0.107 SPECIAL E SPECIAL
CIM032BB 03† 7.70 0.303 1.59 9.11 3.68 0.145 SPECIAL E SPECIAL
CIM032BB 04† 10.90 0.429 1.08 6.19 4.95 0.195 SPECIAL E SPECIAL
CIM032BB 05† 15.60 0.614 0.73 4.18 6.88 0.271 SPECIAL E SPECIAL
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 37
COMPRESSION SPRINGS: INSTRUMENT SERIES
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
38 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
COMPRESSION SPRINGS: INSTRUMENT SERIES
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
CI 008C 01 2.59 0.102 2.77 0.109 0.20 0.008 1.98 0.078 1.65 0.37 6.35 0.250 0.33 1.91 1.40 0.055 C D H
CI 008C 02 7.95 0.313 0.26 1.49 1.63 0.064 C D H
CI 008C 03 9.53 0.375 0.22 1.23 1.83 0.072 C D H
CI 008C 04 11.13 0.438 0.18 1.04 2.06 0.081 C D H
CI 008C 05 12.70 0.500 0.16 0.91 2.26 0.089 C D H
CI 008C 06 14.30 0.563 0.14 0.80 2.49 0.098 C D H
CI 008C 07 15.88 0.625 0.13 0.72 2.69 0.106 C D H
CI 008C 08 19.05 0.750 0.10 0.60 3.15 0.124 C D H
CI 008C 09 22.23 0.875 0.09 0.51 3.58 0.141 C D H
CI 008C 10 25.40 1.000 0.08 0.44 4.01 0.158 C D H
CI 010C 01 0.25 0.010 1.93 0.076 3.11 0.70 6.35 0.250 0.72 4.10 2.03 0.080 D E J
CI 010C 02 7.95 0.313 0.56 3.20 2.39 0.094 D E J
CI 010C 03 9.53 0.375 0.46 2.60 2.72 0.107 D E J
CI 010C 04 11.13 0.438 0.39 2.20 3.07 0.121 D E J
CI 010C 05 12.70 0.500 0.33 1.90 3.43 0.135 D E J
CI 010C 06 14.30 0.563 0.30 1.70 3.78 0.149 D E J
CI 010C 07 15.88 0.625 0.26 1.50 4.14 0.163 D E J
CI 010C 08 19.05 0.750 0.21 1.20 4.83 0.190 D E J
CI 010C 09 22.23 0.875 0.19 1.10 5.54 0.218 D E J
CI 010C 10 25.40 1.000 0.16 0.90 6.25 0.246 D E J
CI 011C 01 0.28 0.011 1.88 0.074 4.45 1.00 6.35 0.250 1.07 6.10 2.24 0.088 D E J
CI 011C 02 7.95 0.313 0.82 4.70 2.64 0.104 D E J
CI 011C 03 9.53 0.375 0.68 3.90 3.02 0.119 D E J
CI 011C 04 11.13 0.438 0.58 3.30 3.43 0.135 D E J
CI 011C 05 12.70 0.500 0.49 2.80 3.81 0.150 D E J
CI 011C 06 14.30 0.563 0.44 2.50 4.22 0.166 D E J
CI 011C 07 15.88 0.625 0.39 2.20 4.62 0.182 D E J
CI 011C 08 19.05 0.750 0.32 1.80 5.41 0.213 D E J
CI 011C 09 22.23 0.875 0.28 1.60 6.20 0.244 D E J
CI 011C 10 25.40 1.000 0.25 1.40 6.99 0.275 D E J
CI 012C 01 0.30 0.012 1.85 0.073 5.56 1.25 6.35 0.250 1.49 8.50 2.57 0.101 D E J
CI 012C 02 7.95 0.313 1.10 6.30 3.05 0.120 D E J
CI 012C 03 9.53 0.375 0.91 5.20 3.53 0.139 D E J
CI 012C 04 11.13 0.438 0.77 4.40 4.01 0.158 D E J
CI 012C 05 12.70 0.500 0.67 3.80 4.47 0.176 D E J
CI 012C 06 14.30 0.563 0.58 3.30 4.95 0.195 D E J
CI 012C 07 15.88 0.625 0.53 3.00 5.44 0.214 D E J
CI 012C 08 19.05 0.750 0.44 2.50 6.38 0.251 D E J
CI 012C 09 22.23 0.875 0.37 2.10 7.34 0.289 D E J
CI 012C 10 25.40 1.000 0.32 1.80 8.28 0.326 D E J
CIM020CA 01† 2.70 0.106 3.10 0.122 0.20 0.008 2.00 0.079 1.25 0.28 5.40 0.213 0.30 1.73 1.30 0.051 SPECIAL E SPECIAL
CIM020CA 02† 8.20 0.323 0.19 1.10 1.70 0.067 SPECIAL E SPECIAL
CIM020CA 03† 12.40 0.488 0.12 0.71 2.31 0.091 SPECIAL E SPECIAL
CIM020CA 04† 17.90 0.705 0.08 0.48 3.10 0.122 SPECIAL E SPECIAL
CIM020CA 05† 26.20 1.031 0.06 0.33 4.29 0.169 SPECIAL E SPECIAL
CIM025CB 01† 2.75 0.108 3.10 0.122 0.25 0.010 1.90 0.075 2.44 0.55 4.90 0.193 0.74 4.22 1.63 0.064 SPECIAL E SPECIAL
CIM025CB 02† 7.30 0.287 0.47 2.68 2.13 0.084 SPECIAL E SPECIAL
CIM025CB 03† 10.90 0.429 0.30 1.74 2.87 0.113 SPECIAL E SPECIAL
CIM025CB 04† 15.70 0.618 0.21 1.18 3.89 0.153 SPECIAL E SPECIAL
CIM025CB 05† 22.90 0.902 0.14 0.80 5.38 0.212 SPECIAL E SPECIAL
CIM032CC 01† 2.82 0.111 3.10 0.122 0.32 0.013 1.90 0.075 5.16 1.16 4.70 0.185 1.98 11.32 2.08 0.082 SPECIAL E SPECIAL
CIM032CC 02† 6.80 0.268 1.26 7.21 2.72 0.107 SPECIAL E SPECIAL
CIM032CC 03† 10.00 0.394 0.82 4.66 3.68 0.145 SPECIAL E SPECIAL
CIM032CC 04† 14.20 0.559 0.56 3.17 4.95 0.195 SPECIAL E SPECIAL
CIM032CC 05† 20.60 0.811 0.38 2.14 6.88 0.271 SPECIAL E SPECIAL
CIM040CD 01† 2.90 0.114 3.30 0.130 0.40 0.016 1.80 0.071 9.07 2.04 4.30 0.169 4.84 27.65 2.59 0.102 D E SPECIAL
CIM040CD 02† 6.30 0.248 3.08 17.59 3.40 0.134 D E SPECIAL
CIM040CD 03† 9.10 0.358 1.99 11.38 4.60 0.181 D E SPECIAL
CIM040CD 04† 13.00 0.512 1.36 7.74 6.20 0.244 D E SPECIAL
CIM040CD 05† 18.50 0.728 0.92 5.23 8.61 0.339 D E SPECIAL
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 39
COMPRESSION SPRINGS: INSTRUMENT SERIES
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
40 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
COMPRESSION SPRINGS: INSTRUMENT SERIES
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
CIM025DA 01† 3.45 0.136 4.00 0.157 0.25 0.010 2.50 0.098 1.92 0.43 7.10 0.280 0.35 2.01 1.63 0.064 SPECIAL E SPECIAL
CIM025DA 02† 10.70 0.421 0.22 1.28 2.13 0.084 SPECIAL E SPECIAL
CIM025DA 03† 16.10 0.634 0.15 0.83 2.87 0.113 SPECIAL E SPECIAL
CIM025DA 04† 23.30 0.917 0.10 0.56 3.89 0.153 SPECIAL E SPECIAL
CIM025DA 05† 34.10 1.343 0.07 0.38 5.38 0.212 SPECIAL E SPECIAL
CIM032DB 01† 3.52 0.139 4.00 0.157 0.32 0.013 2.40 0.094 4.01 0.90 6.30 0.248 0.95 5.40 2.08 0.082 SPECIAL E SPECIAL
CIM032DB 02† 9.40 0.370 0.60 3.44 2.72 0.107 SPECIAL E SPECIAL
CIM032DB 03† 14.00 0.551 0.39 2.22 3.68 0.145 SPECIAL E SPECIAL
CIM032DB 04† 20.10 0.791 0.26 1.51 4.95 0.195 SPECIAL E SPECIAL
CIM032DB 05† 29.30 1.154 0.18 1.02 6.88 0.271 SPECIAL E SPECIAL
CIM040DC 01† 3.60 0.142 4.00 0.157 0.40 0.016 2.50 0.098 7.20 1.62 5.60 0.220 2.31 13.18 2.59 0.102 D E SPECIAL
CIM040DC 02† 8.30 0.327 1.47 8.39 3.40 0.134 D E SPECIAL
CIM040DC 03† 12.00 0.472 0.95 5.43 4.60 0.181 D E SPECIAL
CIM040DC 04† 17.50 0.689 0.65 3.69 6.20 0.244 D E SPECIAL
CIM040DC 05† 25.50 1.004 0.44 2.49 8.61 0.339 D E SPECIAL
CI 010DE 01 3.96 0.156 4.37 0.172 0.25 0.010 3.20 0.126 1.94 0.44 6.35 0.250 0.39 2.20 1.32 0.052 D E J
CI 010DE 02 7.95 0.313 0.30 1.71 1.47 0.058 D E J
CI 010DE 03 9.53 0.375 0.25 1.40 1.63 0.064 D E J
CI 010DE 04 11.13 0.438 0.21 1.19 1.80 0.071 D E J
CI 010DE 05 12.70 0.500 0.18 1.03 1.96 0.077 D E J
CI 010DE 06 14.30 0.563 0.16 0.91 2.11 0.083 D E J
CI 010DE 07 15.88 0.625 0.14 0.81 2.26 0.089 D E J
CI 010DE 08 19.05 0.750 0.12 0.67 2.59 0.102 D E J
CI 010DE 09 22.23 0.875 0.10 0.57 2.90 0.114 D E J
CI 010DE 10 25.40 1.000 0.09 0.50 3.23 0.127 D E J
CI 011DE 01 0.28 0.011 3.18 0.125 2.59 0.58 6.35 0.250 0.54 3.08 1.54 0.061 D E J
CI 011DE 02 7.95 0.313 0.42 2.39 1.73 0.068 D E J
CI 011DE 03 9.53 0.375 0.34 1.95 1.92 0.076 D E J
CI 011DE 04 11.13 0.438 0.29 1.65 2.12 0.083 D E J
CI 011DE 05 12.70 0.500 0.25 1.43 2.31 0.091 D E J
CI 011DE 06 14.30 0.563 0.22 1.26 2.51 0.099 D E J
CI 011DE 07 15.88 0.625 0.20 1.13 2.70 0.106 D E J
CI 011DE 08 19.05 0.750 0.16 0.93 3.09 0.122 D E J
CI 011DE 09 22.23 0.875 0.14 0.79 3.47 0.137 D E J
CI 011DE 10 25.40 1.000 0.12 0.69 3.86 0.152 D E J
CI 012DE 01 0.30 0.012 3.12 0.123 3.40 0.76 6.35 0.250 0.73 4.15 1.68 0.066 D E J
CI 012DE 02 7.95 0.313 0.56 3.21 1.91 0.075 D E J
CI 012DE 03 9.53 0.375 0.46 2.62 2.13 0.084 D E J
CI 012DE 04 11.13 0.438 0.39 2.21 2.36 0.093 D E J
CI 012DE 05 12.70 0.500 0.34 1.92 2.57 0.101 D E J
CI 012DE 06 14.30 0.563 0.30 1.69 2.79 0.110 D E J
CI 012DE 07 15.88 0.625 0.26 1.51 3.02 0.119 D E J
CI 012DE 08 19.05 0.750 0.22 1.25 3.45 0.136 D E J
CI 012DE 09 22.23 0.875 0.19 1.06 3.91 0.154 D E J
CI 012DE 10 25.40 1.000 0.16 0.92 4.37 0.172 D E J
CI 013DE 01 0.33 0.013 3.07 0.121 4.31 0.97 6.35 0.250 0.96 5.49 1.88 0.074 D E J
CI 013DE 02 9.53 0.375 0.60 3.45 2.39 0.094 D E J
CI 013DE 03 12.70 0.500 0.44 2.51 2.92 0.115 D E J
CI 013DE 04 15.88 0.625 0.35 1.98 3.43 0.135 D E J
CI 013DE 05 19.05 0.750 0.29 1.63 3.96 0.156 D E J
CI 013DE 06 25.40 1.000 0.21 1.21 5.00 0.197 D E J
CIM032DF 01† 4.32 0.170 4.80 0.189 0.32 0.013 3.20 0.126 3.21 0.72 8.70 0.343 0.48 2.76 2.08 0.082 SPECIAL E SPECIAL
CIM032DF 02† 13.10 0.516 0.31 1.76 2.72 0.107 SPECIAL E SPECIAL
CIM032DF 03† 19.80 0.780 0.20 1.14 3.68 0.145 SPECIAL E SPECIAL
CIM032DF 04† 28.60 1.126 0.14 0.77 4.95 0.195 SPECIAL E SPECIAL
CIM032DF 05† 41.90 1.650 0.09 0.52 6.88 0.271 SPECIAL E SPECIAL
CIM040DG 01† 4.40 0.173 5.00 0.197 0.40 0.016 3.20 0.126 5.72 1.29 7.50 0.295 1.18 6.75 2.59 0.102 D E SPECIAL
CIM040DG 02† 11.00 0.433 0.75 4.30 3.40 0.134 D E SPECIAL
CIM040DG 03† 16.50 0.650 0.49 2.78 4.60 0.181 D E SPECIAL
CIM040DG 04† 24.00 0.945 0.33 1.89 6.20 0.244 D E SPECIAL
CIM040DG 05† 35.50 1.398 0.22 1.28 8.61 0.339 D E SPECIAL
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 41
COMPRESSION SPRINGS: INSTRUMENT SERIES
42 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
COMPRESSION SPRINGS: INSTRUMENT SERIES
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
CI 011EF 12 4.78 0.188 5.16 0.203 0.28 0.011 3.99 0.157 1.61 0.36 34.93 1.375 0.05 0.31 4.47 0.176 D E J
CI 011EF 13 38.10 1.500 0.05 0.28 4.80 0.189 D E J
CI 011EF 14 44.45 1.750 0.04 0.24 5.46 0.215 D E J
CI 012EF 01 0.30 0.012 3.94 0.155 1.55 0.35 6.35 0.250 0.35 1.97 1.86 0.073 D E J
CI 012EF 02 7.95 0.313 0.28 1.61 2.06 0.081 D E J
CI 012EF 03 9.53 0.375 0.23 1.31 2.31 0.091 D E J
CI 012EF 04 11.13 0.438 0.19 1.11 2.57 0.101 D E J
CI 012EF 05 12.70 0.500 0.17 0.96 2.82 0.111 D E J
CI 012EF 06 14.30 0.563 0.15 0.85 3.08 0.121 D E J
CI 012EF 07 15.88 0.625 0.13 0.76 3.33 0.131 D E J
CI 012EF 08 19.05 0.750 0.11 0.62 3.84 0.151 D E J
CI 012EF 09 22.23 0.875 0.09 0.53 4.34 0.171 D E J
CI 012EF 10 25.40 1.000 0.08 0.46 4.85 0.191 D E J
CI 012EF 11 31.75 1.250 0.06 0.37 5.86 0.231 D E J
CI 012EF 12 34.93 1.375 0.06 0.33 6.37 0.251 D E J
CI 012EF 13 38.10 1.500 0.05 0.30 6.88 0.271 D E J
CI 012EF 14 44.45 1.750 0.05 0.26 7.89 0.311 D E J
CI 013EF 01 0.33 0.013 3.84 0.151 4.07 0.92 6.35 0.250 0.85 4.87 1.58 0.062 D E J
CI 013EF 02 7.95 0.313 0.66 3.75 1.74 0.069 D E J
CI 013EF 03 9.53 0.375 0.54 3.06 1.91 0.075 D E J
CI 013EF 04 11.13 0.438 0.45 2.58 2.08 0.082 D E J
CI 013EF 05 12.70 0.500 0.39 2.23 2.24 0.088 D E J
CI 013EF 06 14.30 0.563 0.34 1.96 2.41 0.095 D E J
CI 013EF 07 15.88 0.625 0.31 1.75 2.57 0.101 D E J
CI 013EF 08 19.05 0.750 0.25 1.45 2.90 0.114 D E J
CI 013EF 09 22.23 0.875 0.22 1.23 3.23 0.127 D E J
CI 013EF 10 25.40 1.000 0.19 1.07 3.56 0.140 D E J
CI 013EF 11 31.75 1.250 0.15 0.85 4.22 0.166 D E J
CI 013EF 12 34.93 1.375 0.13 0.77 4.55 0.179 D E J
CIM040EG 01† 5.40 0.213 6.00 0.236 0.40 0.016 4.10 0.161 4.85 1.09 10.50 0.413 0.61 3.46 2.59 0.102 D E J
CIM040EG 02† 16.00 0.630 0.39 2.20 3.40 0.134 D E J
CIM040EG 03† 24.00 0.945 0.25 1.42 4.60 0.181 D E J
CIM040EG 04† 35.00 1.378 0.17 0.97 6.20 0.244 D E J
CIM040EG 05† 53.00 2.087 0.11 0.65 8.61 0.339 D E J
CI 010EG 01 5.54 0.218 5.94 0.234 0.25 0.010 4.72 0.186 1.09 0.25 6.35 0.250 0.21 1.19 1.12 0.044 D E J
CI 010EG 02 7.95 0.313 0.16 0.92 1.22 0.048 D E J
CI 010EG 03 9.53 0.375 0.13 0.76 1.32 0.052 D E J
CI 010EG 04 11.13 0.438 0.11 0.64 1.42 0.056 D E J
CI 010EG 05 12.70 0.500 0.10 0.56 1.52 0.060 D E J
CI 010EG 06 14.30 0.563 0.09 0.49 1.63 0.064 D E J
CI 010EG 07 15.88 0.625 0.08 0.44 1.73 0.068 D E J
CI 010EG 08 19.05 0.750 0.06 0.36 1.93 0.076 D E J
CI 010EG 09 22.23 0.875 0.05 0.31 2.13 0.084 D E J
CI 010EG 10 25.40 1.000 0.05 0.27 2.34 0.092 D E J
CI 010EG 11 31.75 1.250 0.04 0.21 2.74 0.108 D E J
CI 010EG 12 38.10 1.500 0.03 0.18 3.15 0.124 D E J
CI 010EG 13 44.45 1.750 0.03 0.15 3.56 0.140 D E J
CI 011EG 01 0.28 0.011 4.70 0.185 1.40 0.31 6.35 0.250 0.28 1.57 1.27 0.050 D E J
CI 011EG 02 7.95 0.313 0.21 1.22 1.40 0.055 D E J
CI 011EG 03 9.53 0.375 0.18 1.00 1.52 0.060 D E J
CI 011EG 04 11.13 0.438 0.15 0.85 1.65 0.065 D E J
CI 011EG 05 12.70 0.500 0.13 0.73 1.78 0.070 D E J
CI 011EG 06 14.30 0.563 0.11 0.65 1.91 0.075 D E J
CI 011EG 07 15.88 0.625 0.10 0.58 2.03 0.080 D E J
CI 011EG 08 19.05 0.750 0.08 0.48 2.29 0.090 D E J
CI 011EG 09 22.23 0.875 0.07 0.41 2.54 0.100 D E J
CI 011EG 10 25.40 1.000 0.06 0.36 2.77 0.109 D E J
CI 011EG 11 31.75 1.250 0.05 0.28 3.28 0.129 D E J
CI 011EG 12 38.10 1.500 0.04 0.24 3.78 0.149 D E J
CI 011EG 13 44.45 1.750 0.04 0.20 4.29 0.169 D E J
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 43
COMPRESSION SPRINGS: INSTRUMENT SERIES
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
44 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LCM035A 01 3.00 0.118 3.20 0.126 0.35 0.014 2.10 0.083 8.14 1.83 6.50 0.256 1.91 10.88 2.39 0.094 C E SPECIAL
LCM035A 02 8.00 0.315 1.51 8.65 2.79 0.110 C E SPECIAL
LCM035A 03 9.50 0.374 1.26 7.17 3.20 0.126 C E SPECIAL
LCM035A 04 11.00 0.433 1.07 6.13 3.61 0.142 C E SPECIAL
LCM035A 05 12.50 0.492 0.94 5.35 3.99 0.157 C E SPECIAL
LCM035A 06 14.00 0.551 0.83 4.75 4.39 0.173 D F SPECIAL
LCM035A 07 15.50 0.610 0.75 4.27 4.80 0.189 D F SPECIAL
LCM035A 08 17.00 0.669 0.68 3.87 5.26 0.207 D F SPECIAL
LCM035A 09 19.00 0.748 0.60 3.45 5.79 0.228 E G SPECIAL
LCM035A 10 25.00 0.984 0.46 2.60 7.39 0.291 E G SPECIAL
LCM035A 11 27.50 1.083 0.41 2.36 8.15 0.321 F H SPECIAL
LCM035A 12 30.00 1.181 0.38 2.15 8.84 0.348 F H SPECIAL
LCM035A 13 40.00 1.575 0.28 1.61 11.61 0.457 F H SPECIAL
LCM050A 01 0.50 0.020 1.80 0.071 20.51 4.61 6.50 0.256 7.50 42.81 3.76 0.148 C E SPECIAL
LCM050A 02 8.00 0.315 5.89 33.64 4.52 0.178 C E SPECIAL
LCM050A 03 9.50 0.374 4.85 27.70 5.26 0.207 C E SPECIAL
LCM050A 04 11.00 0.433 4.12 23.54 6.02 0.237 C E SPECIAL
LCM050A 05 12.50 0.492 3.58 20.47 6.76 0.266 C E SPECIAL
LCM050A 06 14.00 0.551 3.17 18.11 7.52 0.296 D F SPECIAL
LCM050A 07 15.50 0.610 2.84 16.24 8.28 0.326 D F SPECIAL
LCM050A 08 17.00 0.669 2.58 14.72 9.02 0.355 D F SPECIAL
LCM050A 09 19.00 0.748 2.29 13.08 10.03 0.395 E G SPECIAL
LCM050A 10 25.00 0.984 1.72 9.81 13.03 0.513 E G SPECIAL
LCM050A 11 27.50 1.083 1.55 8.88 14.30 0.563 F H SPECIAL
LCM050A 12 30.00 1.181 1.42 8.12 15.54 0.612 F H SPECIAL
LCM050A 13 40.00 1.575 1.06 6.04 20.55 0.809 F H SPECIAL
LCM050AA 01† 3.40 0.134 0.50 0.020 1.70 0.067 16.79 3.78 4.40 0.173 11.82 67.49 2.74 0.108 F H SPECIAL
LCM050AA 02† 6.10 0.240 7.52 42.95 3.76 0.148 F H SPECIAL
LCM050AA 03† 8.70 0.343 4.87 27.79 5.26 0.207 F H SPECIAL
LCM050AA 04† 12.00 0.472 3.31 18.90 7.24 0.285 F H SPECIAL
LCM050AA 05† 17.50 0.689 2.24 12.77 10.26 0.404 F H SPECIAL
LC 014A 01 3.05 0.120 3.18 0.125 0.36 0.014 2.13 0.084 8.90 2.00 6.35 0.250 1.98 11.30 2.24 0.088 C E J
LC 014A 02 7.95 0.313 1.56 8.90 2.67 0.105 C E J
LC 014A 03 9.53 0.375 1.24 7.10 3.10 0.122 C E J
LC 014A 04 11.13 0.438 1.05 6.00 3.53 0.139 C E J
LC 014A 05 12.70 0.500 0.91 5.20 3.96 0.156 D F K
LC 014A 06 14.30 0.563 0.81 4.60 4.37 0.172 D F K
LC 014A 07 15.88 0.625 0.72 4.10 4.80 0.189 D F K
LC 014A 08 17.48 0.688 0.67 3.80 5.23 0.206 D F K
LC 014A 09 19.05 0.750 0.60 3.40 5.66 0.223 E G L
LC 014A 9A 20.65 0.813 0.54 3.10 6.45 0.254 E G L
LC 014A 9B 22.23 0.875 0.51 2.90 6.83 0.269 E G L
LC 014A 9C 23.83 0.938 0.47 2.70 7.29 0.287 E G L
LC 014A 10 25.40 1.000 0.44 2.50 7.37 0.290 E G L
LC 014A 11 28.58 1.125 0.40 2.30 8.23 0.324 F H M
LC 014A 12 31.75 1.250 0.35 2.00 9.07 0.357 F H M
LC 014A 13 38.10 1.500 0.32 1.80 10.72 0.422 F H M
LC 016A 0 0.41 0.016 2.06 0.081 11.12 2.50 4.78 0.188 4.48 25.60 2.21 0.087 C E J
LC 016A 01 6.35 0.250 3.06 17.50 2.90 0.114 C E J
LC 016A 02 7.95 0.313 2.45 14.00 3.38 0.133 C E J
LC 016A 03 9.53 0.375 1.93 11.00 4.06 0.160 C E J
LC 016A 04 11.13 0.438 1.66 9.50 4.70 0.185 C E J
LC 016A 05 12.70 0.500 1.49 8.50 5.21 0.205 D F K
LC 016A 06 14.30 0.563 1.31 7.50 5.72 0.225 D F K
LC 016A 07 15.88 0.625 1.14 6.50 6.32 0.249 D F K
LC 016A 08 17.48 0.688 1.05 6.00 6.93 0.273 D F K
LC 016A 09 19.05 0.750 0.88 5.00 7.75 0.305 E G L
LC 016A 10 25.40 1.000 0.70 4.00 9.53 0.375 E G L
LC 016A 11 28.58 1.125 0.61 3.50 11.23 0.442 F H M
LC 016A 12 31.75 1.250 0.56 3.20 12.14 0.478 F H M
LC 016A 13 38.10 1.500 0.47 2.70 14.22 0.560 F H M
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 45
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
46 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 014AA 01 3.18 0.125 3.58 0.141 0.36 0.014 2.26 0.089 6.91 1.55 6.35 0.250 1.71 9.77 2.31 0.091 C E J
LC 014AA 02 7.95 0.313 1.33 7.61 2.76 0.109 C E J
LC 014AA 03 9.53 0.375 1.09 6.25 3.20 0.126 C E J
LC 014AA 04 11.13 0.438 0.93 5.29 3.65 0.144 C E J
LC 014AA 05 12.70 0.500 0.80 4.59 4.09 0.161 D F K
LC 014AA 06 14.30 0.563 0.71 4.05 4.54 0.179 D F K
LC 014AA 07 15.88 0.625 0.64 3.63 4.98 0.196 D F K
LC 014AA 08 17.48 0.688 0.58 3.29 5.43 0.214 D F K
LC 014AA 09 19.05 0.750 0.53 3.00 5.87 0.231 D F K
LC 014AA 10 20.65 0.813 0.48 2.76 6.32 0.249 E G L
LC 014AA 11 22.23 0.875 0.45 2.56 6.76 0.266 E G L
LC 014AA 12 23.83 0.938 0.42 2.38 7.21 0.284 E G L
LC 014AA 13 25.40 1.000 0.39 2.23 7.65 0.301 E G L
LC 014AA 14 28.58 1.125 0.35 1.98 8.54 0.336 F H M
LC 014AA 15 31.75 1.250 0.31 1.77 9.43 0.371 F H M
LC 014AA 16 34.93 1.375 0.28 1.61 10.32 0.406 F H M
LC 014AA 17 38.10 1.500 0.26 1.47 11.21 0.441 F H M
LC 016AA 01 0.41 0.016 2.16 0.085 12.09 2.72 6.35 0.250 3.20 18.29 2.57 0.101 C E J
LC 016AA 02 7.95 0.313 2.48 14.19 3.08 0.121 C E J
LC 016AA 03 9.53 0.375 2.04 11.62 3.57 0.141 C E J
LC 016AA 04 11.13 0.438 1.72 9.82 4.07 0.160 C E J
LC 016AA 05 12.70 0.500 1.49 8.52 4.56 0.180 D F K
LC 016AA 06 14.30 0.563 1.31 7.51 5.07 0.200 D F K
LC 016AA 07 15.88 0.625 1.18 6.72 5.56 0.219 D F K
LC 016AA 08 17.48 0.688 1.06 6.08 6.06 0.239 D F K
LC 016AA 09 19.05 0.750 0.97 5.55 6.56 0.258 D F K
LC 016AA 10 20.65 0.813 0.89 5.11 7.06 0.278 E G L
LC 016AA 11 23.83 0.938 0.77 4.40 8.06 0.317 E G L
LC 016AA 12 25.40 1.000 0.72 4.12 8.55 0.337 E G L
LC 016AA 13 31.75 1.250 0.57 3.27 10.54 0.415 F H M
LC 016AA 14 38.10 1.500 0.48 2.72 12.53 0.494 F H M
LC 018AA 01 0.46 0.018 2.08 0.082 16.36 3.68 6.35 0.250 4.99 28.47 3.07 0.121 C E J
LC 018AA 02 7.95 0.313 3.85 22.00 3.69 0.145 C E J
LC 018AA 03 9.53 0.375 3.15 18.00 4.31 0.170 C E J
LC 018AA 04 12.70 0.500 2.30 13.13 5.55 0.219 D F K
LC 018AA 05 14.30 0.563 2.02 11.56 6.18 0.243 D F K
LC 018AA 06 15.88 0.625 1.81 10.34 6.79 0.267 D F K
LC 018AA 07 17.48 0.688 1.64 9.34 7.42 0.292 D F K
LC 018AA 08 19.05 0.750 1.49 8.53 8.03 0.316 D F K
LC 018AA 09 20.65 0.813 1.37 7.84 8.66 0.341 E G L
LC 018AA 10 23.83 0.938 1.18 6.75 9.90 0.390 E G L
LC 018AA 11 25.40 1.000 1.11 6.32 10.52 0.414 E G L
LC 018AA 12 31.75 1.250 0.88 5.02 13.00 0.512 F H M
LC 018AA 13 38.10 1.500 0.73 4.16 15.49 0.610 F H M
LC 020AA 01 0.51 0.020 1.98 0.078 25.04 5.63 6.35 0.250 8.30 47.41 3.33 0.131 C E J
LC 020AA 02 7.95 0.313 6.39 36.47 4.02 0.158 C E J
LC 020AA 03 9.53 0.375 5.42 30.97 4.70 0.185 C E J
LC 020AA 04 12.70 0.500 3.76 21.46 6.10 0.240 D F K
LC 020AA 05 14.30 0.563 3.28 18.73 6.84 0.269 D F K
LC 020AA 06 15.88 0.625 2.91 16.61 7.57 0.298 D F K
LC 020AA 07 17.48 0.688 2.60 14.88 8.34 0.328 D F K
LC 020AA 08 19.05 0.750 2.36 13.47 9.10 0.358 D F K
LC 020AA 09 20.65 0.813 2.17 12.37 9.81 0.386 E G L
LC 020AA 10 23.83 0.938 1.86 10.65 11.23 0.442 E G L
LC 020AA 11 25.40 1.000 1.74 9.96 11.94 0.470 E G L
LC 020AA 12 31.75 1.250 1.38 7.90 14.77 0.582 F H M
LC 020AA 13 38.10 1.500 1.15 6.55 17.61 0.693 F H M
LC 022AA 01 0.56 0.022 1.88 0.074 30.47 6.85 6.35 0.250 12.09 69.07 3.83 0.151 C E J
LC 022AA 02 7.95 0.313 9.26 52.90 4.65 0.183 C E J
LC 022AA 03 9.53 0.375 7.53 42.99 5.46 0.215 C E J
LC 022AA 04 12.70 0.500 5.46 31.20 7.08 0.279 D F K
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 47
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
48 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 021AB 07 3.76 0.148 3.96 0.156 0.53 0.021 2.51 0.099 17.79 4.00 15.88 0.625 2.05 11.70 7.47 0.294 D F K
LC 021AB 08 17.48 0.688 1.84 10.50 8.15 0.321 D F K
LC 021AB 09 19.05 0.750 1.70 9.70 8.86 0.349 E G L
LC 021AB 10 20.65 0.813 1.56 8.90 9.55 0.376 E G L
LC 021AB 11 23.83 0.938 1.31 7.50 10.92 0.430 E G L
LC 021AB 12 25.40 1.000 1.23 7.00 11.63 0.458 F H M
LC 021AB 13 31.75 1.250 1.02 5.80 14.43 0.568 F H M
LC 021AB 14 38.10 1.500 0.84 4.80 17.15 0.675 F H M
LC 023AB 01 0.58 0.023 2.41 0.095 22.24 5.00 6.35 0.250 8.32 47.50 3.73 0.147 C E J
LC 023AB 02 7.95 0.313 6.39 36.50 4.52 0.178 C E J
LC 023AB 03 9.53 0.375 5.17 29.50 5.31 0.209 C E J
LC 023AB 04 11.13 0.438 4.45 25.40 6.07 0.239 C E J
LC 023AB 05 12.70 0.500 3.85 22.00 6.91 0.272 D F K
LC 023AB 06 14.30 0.563 3.33 19.00 7.67 0.302 D F K
LC 023AB 07 15.88 0.625 2.98 17.00 8.48 0.334 D F K
LC 023AB 08 17.48 0.688 2.71 15.50 9.25 0.364 D F K
LC 023AB 09 19.05 0.750 2.45 14.00 10.06 0.396 E G L
LC 023AB 10 20.65 0.813 2.24 12.80 10.80 0.425 E G L
LC 023AB 11 23.83 0.938 1.93 11.00 12.83 0.505 E G L
LC 023AB 12 25.40 1.000 1.80 10.30 13.16 0.518 F H M
LC 023AB 13 31.75 1.250 1.45 8.30 16.56 0.652 F H M
LC 023AB 14 38.10 1.500 1.21 6.90 19.63 0.773 F H M
LCM063AC 01† 3.83 0.151 4.20 0.165 0.63 0.025 2.30 0.091 25.65 5.77 5.50 0.217 14.20 81.12 3.45 0.136 F H SPECIAL
LCM063AC 02† 7.80 0.307 9.04 51.62 4.72 0.186 F H SPECIAL
LCM063AC 03† 11.00 0.433 5.85 33.40 6.60 0.260 F H SPECIAL
LCM063AC 04† 15.50 0.610 3.98 22.71 9.14 0.360 F H SPECIAL
LCM063AC 05† 22.50 0.886 2.69 15.35 12.90 0.508 F H SPECIAL
LC 016AC 01 3.96 0.156 4.37 0.172 0.41 0.016 2.95 0.116 7.83 1.76 6.35 0.250 1.89 10.82 2.21 0.087 C E J
LC 016AC 02 7.95 0.313 1.47 8.39 2.61 0.103 C E J
LC 016AC 03 9.53 0.375 1.20 6.88 3.00 0.118 C E J
LC 016AC 04 11.13 0.438 1.02 5.81 3.40 0.134 D F K
LC 016AC 05 12.70 0.500 0.88 5.04 3.79 0.149 D F K
LC 016AC 06 14.30 0.563 0.78 4.44 4.19 0.165 D F K
LC 016AC 07 15.88 0.625 0.70 3.98 4.58 0.181 D F K
LC 016AC 08 17.48 0.688 0.63 3.60 4.98 0.196 D F K
LC 016AC 09 19.05 0.750 0.58 3.29 5.38 0.212 E G L
LC 016AC 10 25.40 1.000 0.43 2.45 6.96 0.274 E G L
LC 016AC 11 28.58 1.125 0.38 2.16 7.75 0.305 E G L
LC 016AC 12 31.75 1.250 0.34 1.94 8.54 0.336 F H M
LC 016AC 13 38.10 1.500 0.28 1.61 10.12 0.398 F H M
LC 023AD 01 0.58 0.023 2.62 0.103 24.57 5.52 6.35 0.250 8.43 48.13 3.43 0.135 C E J
LC 023AD 02 7.95 0.313 6.44 36.77 4.12 0.162 C E J
LC 023AD 03 9.53 0.375 5.23 29.84 4.80 0.189 C E J
LC 023AD 04 11.13 0.438 4.39 25.05 5.49 0.216 C E J
LC 023AD 05 12.70 0.500 3.79 21.63 6.17 0.243 D F K
LC 023AD 06 14.30 0.563 3.33 18.99 6.86 0.270 D F K
LC 023AD 07 15.88 0.625 2.97 16.96 7.53 0.297 D F K
LC 023AD 08 17.48 0.688 2.68 15.29 8.22 0.324 D F K
LC 023AD 09 19.05 0.750 2.44 13.95 8.90 0.350 E G L
LC 023AD 10 20.65 0.813 2.24 12.80 9.59 0.378 E G L
LC 023AD 11 23.83 0.938 1.93 11.01 10.96 0.431 E G L
LC 023AD 12 25.40 1.000 1.80 10.29 11.63 0.458 F H M
LC 023AD 13 31.75 1.250 1.43 8.15 14.37 0.566 F H M
LC 023AD 14 38.10 1.500 1.18 6.75 17.10 0.673 F H M
LCM050AE 01 4.50 0.177 5.00 0.197 0.50 0.020 3.10 0.122 11.51 2.59 7.00 0.276 2.83 16.18 2.74 0.108 F H SPECIAL
LCM050AE 02 10.00 0.394 1.81 10.36 3.76 0.148 F H SPECIAL
LCM050AE 03 15.00 0.591 1.19 6.79 5.26 0.207 F H SPECIAL
LCM050AE 04 21.50 0.846 0.81 4.61 7.24 0.285 F H SPECIAL
LCM050AE 05 31.00 1.220 0.55 3.12 10.26 0.404 F H SPECIAL
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 49
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
50 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 022B 01 4.57 0.180 4.78 0.188 0.56 0.022 3.25 0.128 17.79 4.00 6.35 0.250 5.25 30.00 2.82 0.111 C E J
LC 022B 02 7.95 0.313 4.20 24.00 3.25 0.128 C E J
LC 022B 03 9.53 0.375 3.50 20.00 3.66 0.144 C E J
LC 022B 04 11.13 0.438 2.98 17.00 4.09 0.161 C E J
LC 022B 05 12.70 0.500 2.45 14.00 4.78 0.188 D F K
LC 022B 06 14.30 0.563 2.10 12.00 5.33 0.210 D F K
LC 022B 07 15.88 0.625 1.84 10.50 6.05 0.238 D F K
LC 022B 08 17.48 0.688 1.66 9.50 6.60 0.260 D F K
LC 022B 09 19.05 0.750 1.49 8.50 7.29 0.287 E G L
LC 022B 10 20.65 0.813 1.31 7.50 7.87 0.310 E G L
LC 022B 11 23.83 0.938 1.17 6.70 8.79 0.346 E G L
LC 022B 12 25.40 1.000 1.10 6.30 9.35 0.368 F H M
LC 022B 13 28.58 1.125 0.96 5.50 10.24 0.403 F H M
LC 022B 14 31.75 1.250 0.88 5.00 11.33 0.446 F H M
LC 022B 15 38.10 1.500 0.72 4.10 13.39 0.527 F H M
LC 022B 16 44.45 1.750 0.61 3.50 15.75 0.620 F H M
LC 024B 01 0.61 0.024 3.15 0.124 24.02 5.40 6.35 0.250 7.70 44.00 3.30 0.130 C E J
LC 024B 02 7.95 0.313 5.78 33.00 4.01 0.158 C E J
LC 024B 03 9.53 0.375 4.64 26.50 4.52 0.178 C E J
LC 024B 04 11.13 0.438 3.85 22.00 5.13 0.202 C E J
LC 024B 05 12.70 0.500 3.33 19.00 5.61 0.221 D F K
LC 024B 06 14.30 0.563 2.89 16.50 6.30 0.248 D F K
LC 024B 07 15.88 0.625 2.63 15.00 6.83 0.269 D F K
LC 024B 08 19.05 0.750 2.10 12.00 8.18 0.322 E G L
LC 024B 09 22.23 0.875 1.80 10.30 9.40 0.370 E G L
LC 024B 10 25.40 1.000 1.58 9.00 10.57 0.416 F H M
LC 024B 11 28.58 1.125 1.37 7.80 11.84 0.466 F H M
LC 024B 12 31.75 1.250 1.23 7.00 12.95 0.510 F H M
LC 024B 13 38.10 1.500 1.02 5.80 15.19 0.598 F H M
LC 024B 14 44.45 1.750 0.88 5.00 17.07 0.672 F H M
LC 024B 15 50.80 2.000 0.75 4.30 19.53 0.769 G J N
LC 026B 01 0.66 0.026 3.05 0.120 30.25 6.80 6.35 0.250 10.51 60.00 3.51 0.138 C E J
LC 026B 02 7.95 0.313 8.23 47.00 3.99 0.157 C E J
LC 026B 03 9.53 0.375 6.48 37.00 4.83 0.190 C E J
LC 026B 04 11.13 0.438 5.43 31.00 5.46 0.215 C E J
LC 026B 05 12.70 0.500 4.73 27.00 5.97 0.235 D F K
LC 026B 06 14.30 0.563 4.03 23.00 6.96 0.274 D F K
LC 026B 07 15.88 0.625 3.68 21.00 7.29 0.287 D F K
LC 026B 08 17.48 0.688 3.33 19.00 7.95 0.313 D F K
LC 026B 09 19.05 0.750 2.98 17.00 8.76 0.345 E G L
LC 026B 10 20.65 0.813 2.80 16.00 9.27 0.365 E G L
LC 026B 11 22.23 0.875 2.63 15.00 9.93 0.391 E G L
LC 026B 12 25.40 1.000 2.15 12.30 11.51 0.453 F H M
LC 026B 13 28.58 1.125 1.89 10.80 13.00 0.512 F H M
LC 026B 14 31.75 1.250 1.70 9.70 14.02 0.552 F H M
LC 026B 15 38.10 1.500 1.40 8.00 17.27 0.680 F H M
LC 026B 16 44.45 1.750 1.21 6.90 19.46 0.766 F H M
LC 026B 17 50.80 2.000 1.05 6.00 22.12 0.871 G J N
LC 029B 0 0.74 0.029 2.92 0.115 42.26 9.50 6.35 0.250 17.12 97.80 4.04 0.159 C E J
LC 029B 01 7.95 0.313 13.31 76.00 4.75 0.187 C E J
LC 029B 02 9.53 0.375 10.68 61.00 5.59 0.220 C E J
LC 029B 03 11.13 0.438 8.76 50.00 6.32 0.249 C E J
LC 029B 04 12.70 0.500 7.53 43.00 7.11 0.280 D F K
LC 029B 05 14.30 0.563 6.57 37.50 8.00 0.315 D F K
LC 029B 06 15.88 0.625 5.78 33.00 8.74 0.344 D F K
LC 029B 07 17.48 0.688 5.25 30.00 9.45 0.372 D F K
LC 029B 08 19.05 0.750 4.73 27.00 10.41 0.410 E G L
LC 029B 09 20.65 0.813 4.38 25.00 11.10 0.437 E G L
LC 029B 10 22.23 0.875 4.03 23.00 11.89 0.468 E G L
LC 029B 11 23.83 0.938 3.73 21.30 12.75 0.502 E G L
LC 029B 12 25.40 1.000 3.41 19.50 13.51 0.532 F H M
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 51
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
52 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LCM045B 08 4.60 0.181 4.80 0.189 0.45 0.018 3.40 0.134 10.81 2.43 17.00 0.669 0.84 4.78 4.09 0.161 D F SPECIAL
LCM045B 09 19.00 0.748 0.74 4.25 4.50 0.177 E G SPECIAL
LCM045B 10 25.00 0.984 0.56 3.19 5.69 0.224 E G SPECIAL
LCM045B 11 30.00 1.181 0.46 2.64 6.68 0.263 F H SPECIAL
LCM045B 12 40.00 1.575 0.34 1.97 8.66 0.341 F H SPECIAL
LCM055B 01 0.55 0.022 3.27 0.129 17.66 3.97 6.50 0.256 4.72 26.96 2.77 0.109 C E SPECIAL
LCM055B 02 8.00 0.315 3.69 21.10 3.23 0.127 C E SPECIAL
LCM055B 03 9.50 0.374 3.03 17.33 3.68 0.145 C E SPECIAL
LCM055B 04 11.00 0.433 2.57 14.70 4.14 0.163 C E SPECIAL
LCM055B 05 12.50 0.492 2.24 12.77 4.60 0.181 C E SPECIAL
LCM055B 06 14.00 0.551 1.98 11.28 5.05 0.199 D F SPECIAL
LCM055B 07 15.50 0.610 1.77 10.11 5.54 0.218 D F SPECIAL
LCM055B 08 17.00 0.669 1.60 9.16 5.99 0.236 D F SPECIAL
LCM055B 09 19.00 0.748 1.42 8.13 6.60 0.260 E G SPECIAL
LCM055B 10 25.00 0.984 1.07 6.09 8.43 0.332 E G SPECIAL
LCM055B 11 27.50 1.083 0.96 5.51 9.22 0.363 F H SPECIAL
LCM055B 12 30.00 1.181 0.88 5.04 9.98 0.393 F H SPECIAL
LCM055B 13 40.00 1.575 0.65 3.74 13.06 0.514 F H SPECIAL
LCM060B 01 0.60 0.024 3.10 0.122 23.57 5.30 6.50 0.256 6.81 38.91 3.05 0.120 C E SPECIAL
LCM060B 02 8.00 0.315 5.31 30.33 3.56 0.140 C E SPECIAL
LCM060B 03 9.50 0.374 4.35 24.85 4.09 0.161 C E SPECIAL
LCM060B 04 11.00 0.433 3.68 21.04 4.60 0.181 C E SPECIAL
LCM060B 05 12.50 0.492 3.20 18.25 5.13 0.202 C E SPECIAL
LCM060B 06 14.00 0.551 2.82 16.11 5.66 0.223 D F SPECIAL
LCM060B 07 15.50 0.610 2.52 14.42 6.17 0.243 D F SPECIAL
LCM060B 08 17.00 0.669 2.29 13.05 6.71 0.264 D F SPECIAL
LCM060B 09 19.00 0.748 2.03 11.59 7.39 0.291 E G SPECIAL
LCM060B 10 25.00 0.984 1.52 8.67 9.47 0.373 E G SPECIAL
LCM060B 11 27.50 1.083 1.37 7.84 10.34 0.407 F H SPECIAL
LCM060B 12 30.00 1.181 1.25 7.16 11.23 0.442 F H SPECIAL
LCM060B 13 40.00 1.575 0.93 5.32 16.08 0.633 F H SPECIAL
LCM060B 14 50.00 1.969 0.74 4.23 18.19 0.716 F H SPECIAL
LCM080B 01 0.80 0.032 2.70 0.106 55.91 12.57 6.50 0.256 24.00 137.07 4.17 0.164 C E SPECIAL
LCM080B 02 8.00 0.315 18.37 104.94 4.95 0.195 C E SPECIAL
LCM080B 03 9.50 0.374 14.89 85.02 5.74 0.226 C E SPECIAL
LCM080B 04 11.00 0.433 12.51 71.45 6.53 0.257 C E SPECIAL
LCM080B 05 12.50 0.492 10.79 61.62 7.32 0.288 C E SPECIAL
LCM080B 06 14.00 0.551 9.48 54.13 8.10 0.319 D F SPECIAL
LCM080B 07 15.50 0.610 8.46 48.32 8.89 0.350 D F SPECIAL
LCM080B 08 17.00 0.669 7.64 43.61 9.68 0.381 D F SPECIAL
LCM080B 09 19.00 0.748 6.76 38.60 10.74 0.423 E G SPECIAL
LCM080B 10 25.00 0.984 5.03 28.70 13.89 0.547 E G SPECIAL
LCM080B 11 27.50 1.083 4.54 25.93 15.19 0.598 F H SPECIAL
LCM080B 12 30.00 1.181 4.14 23.65 16.51 0.650 F H SPECIAL
LCM080B 13 40.00 1.575 3.06 17.49 21.77 0.857 F H SPECIAL
LCM080B 14 50.00 1.969 2.43 13.88 27.00 1.063 F H SPECIAL
LCM063BA 01† 4.63 0.182 5.00 0.197 0.63 0.025 3.00 0.118 22.56 5.07 6.70 0.264 7.27 41.53 3.45 0.136 F H SPECIAL
LCM063BA 02† 9.60 0.378 4.63 26.43 4.72 0.186 F H SPECIAL
LCM063BA 03† 14.00 0.551 2.99 17.10 6.60 0.260 F H SPECIAL
LCM063BA 04† 20.00 0.787 2.04 11.63 9.14 0.360 F H SPECIAL
LCM063BA 05† 29.00 1.142 1.38 7.86 12.90 0.508 F H SPECIAL
LC 014BB 01 4.78 0.188 5.16 0.203 0.36 0.014 3.86 0.152 2.64 0.59 6.35 0.250 0.59 3.40 1.91 0.075 C E J
LC 014BB 02 7.95 0.313 0.46 2.65 2.25 0.088 C E J
LC 014BB 03 9.53 0.375 0.38 2.17 2.57 0.101 C E J
LC 014BB 04 11.13 0.438 0.32 1.84 2.91 0.115 C E J
LC 014BB 05 12.70 0.500 0.28 1.60 3.24 0.128 D F K
LC 014BB 06 14.30 0.563 0.25 1.41 3.57 0.141 D F K
LC 014BB 07 15.88 0.625 0.22 1.26 3.90 0.154 D F K
LC 014BB 08 19.05 0.750 0.18 1.04 4.57 0.180 D F K
LC 014BB 09 22.23 0.875 0.16 0.89 5.23 0.206 D F K
LC 014BB 10 25.40 1.000 0.14 0.78 5.89 0.232 E G L
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 53
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
54 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 026BB 11 4.78 0.188 5.16 0.203 0.66 0.026 3.25 0.128 34.17 7.68 23.83 0.938 2.39 13.65 9.39 0.370 E G L
LC 026BB 12 25.40 1.000 2.14 12.20 10.11 0.398 E G L
LC 026BB 13 28.58 1.125 1.96 11.19 11.16 0.439 E G L
LC 026BB 14 31.75 1.250 1.76 10.03 12.30 0.484 E G L
LC 026BB 15 38.10 1.500 1.45 8.30 14.58 0.574 F H M
LC 026BB 16 44.45 1.750 1.24 7.07 16.86 0.664 F H M
LC 029BB 01 0.74 0.029 3.10 0.122 47.29 10.63 6.35 0.250 17.04 97.31 3.57 0.141 C E J
LC 029BB 02 7.95 0.313 12.83 73.27 4.25 0.167 C E J
LC 029BB 03 9.53 0.375 10.32 58.94 4.91 0.193 C E J
LC 029BB 04 11.13 0.438 8.61 49.17 5.59 0.220 C E J
LC 029BB 05 12.70 0.500 7.40 42.27 6.25 0.246 D F K
LC 029BB 06 14.30 0.563 6.48 37.00 6.93 0.273 D F K
LC 029BB 07 15.88 0.625 5.77 32.95 7.59 0.299 D F K
LC 029BB 08 17.48 0.688 5.19 29.66 8.27 0.326 D F K
LC 029BB 09 19.05 0.750 4.73 27.00 8.93 0.352 D F K
LC 029BB 10 20.65 0.813 4.33 24.75 9.61 0.378 E G L
LC 029BB 11 22.23 0.875 4.00 22.87 10.27 0.404 E G L
LC 029BB 12 23.83 0.938 3.72 21.23 10.95 0.431 E G L
LC 029BB 13 28.58 1.125 3.07 17.51 12.95 0.510 E G L
LC 029BB 14 31.75 1.250 2.74 15.67 14.29 0.563 E G L
LC 029BB 15 34.93 1.375 2.48 14.19 15.63 0.615 F H M
LC 029BB 16 38.10 1.500 2.24 12.80 16.97 0.668 F H M
LC 029BB 17 44.45 1.750 1.93 11.04 19.65 0.774 F H M
LC 029BB 18 50.80 2.000 1.68 9.62 22.33 0.879 F H M
LC 032BB 01 0.81 0.032 2.92 0.115 62.75 14.11 6.35 0.250 26.53 151.54 3.99 0.157 C E J
LC 032BB 02 7.95 0.313 19.82 113.20 4.77 0.188 C E J
LC 032BB 03 9.53 0.375 15.87 90.63 5.54 0.218 C E J
LC 032BB 04 11.13 0.438 13.20 75.36 6.32 0.249 C E J
LC 032BB 05 12.70 0.500 11.32 64.65 7.09 0.279 D F K
LC 032BB 06 14.30 0.563 9.89 56.49 7.87 0.310 D F K
LC 032BB 07 15.88 0.625 8.80 50.24 8.64 0.340 D F K
LC 032BB 08 17.48 0.688 7.91 45.17 9.43 0.371 D F K
LC 032BB 09 19.05 0.750 7.19 41.09 10.20 0.401 D F K
LC 032BB 10 20.65 0.813 6.59 37.63 10.98 0.432 E G L
LC 032BB 11 22.23 0.875 6.09 34.75 11.75 0.463 E G L
LC 032BB 12 23.83 0.938 5.65 32.25 12.53 0.493 E G L
LC 032BB 13 25.40 1.000 5.27 30.11 13.30 0.524 E G L
LC 032BB 14 28.58 1.125 4.65 26.57 14.86 0.585 F H M
LC 032BB 15 31.75 1.250 4.16 23.77 16.41 0.646 F H M
LC 032BB 16 34.93 1.375 3.76 21.50 17.96 0.707 F H M
LC 032BB 17 38.10 1.500 3.40 19.40 19.51 0.768 F H M
LC 032BB 18 44.45 1.750 2.93 16.72 22.62 0.891 G J N
LC 032BB 19 50.80 2.000 2.55 14.56 25.73 1.013 G J N
LCM080BB 01† 4.80 0.189 5.30 0.209 0.80 0.032 2.80 0.110 43.60 9.80 6.90 0.272 18.91 107.99 4.39 0.173 F H SPECIAL
LCM080BB 02† 9.70 0.382 12.03 68.72 5.99 0.236 F H SPECIAL
LCM080BB 03† 14.00 0.551 7.79 44.47 8.41 0.331 F H SPECIAL
LCM080BB 04† 19.50 0.768 5.29 30.24 11.61 0.457 F H SPECIAL
LCM080BB 05† 28.00 1.102 3.58 20.43 16.41 0.646 F H SPECIAL
LC 018BC 01 5.33 0.210 5.56 0.219 0.46 0.018 4.19 0.165 8.90 2.00 6.35 0.250 1.94 11.10 1.88 0.074 C E J
LC 018BC 02 7.95 0.313 1.51 8.60 2.16 0.085 C E J
LC 018BC 03 9.53 0.375 1.23 7.00 2.44 0.096 C E J
LC 018BC 04 11.13 0.438 1.03 5.90 2.72 0.107 C E J
LC 018BC 05 12.70 0.500 0.89 5.10 2.97 0.117 D F K
LC 018BC 06 14.30 0.563 0.79 4.50 3.25 0.128 D F K
LC 018BC 07 15.88 0.625 0.70 4.00 3.53 0.139 D F K
LC 018BC 08 17.48 0.688 0.65 3.70 3.81 0.150 D F K
LC 018BC 09 19.05 0.750 0.58 3.30 4.09 0.161 E G L
LC 018BC 10 20.65 0.813 0.54 3.10 4.37 0.172 E G L
LC 018BC 11 22.35 0.880 0.49 2.80 4.65 0.183 E G L
LC 018BC 12 25.40 1.000 0.44 2.50 5.18 0.204 E G L
LC 018BC 13 31.75 1.250 0.35 2.00 6.27 0.247 F H M
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 55
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
56 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 018BD 10 5.54 0.218 5.94 0.234 0.46 0.018 4.42 0.174 4.37 0.98 25.40 1.000 0.25 1.40 7.54 0.297 E G L
LC 018BD 11 31.75 1.250 0.20 1.12 9.25 0.364 F H M
LC 018BD 12 34.93 1.375 0.18 1.01 10.11 0.398 F H M
LC 018BD 13 38.10 1.500 0.16 0.92 10.96 0.432 F H M
LC 018BD 14 44.45 1.750 0.14 0.79 12.67 0.499 G J N
LC 020BD 01 0.51 0.020 4.29 0.169 10.57 2.38 6.35 0.250 2.53 14.43 2.17 0.085 C E J
LC 020BD 02 7.95 0.313 1.94 11.10 2.50 0.099 C E J
LC 020BD 03 9.53 0.375 1.58 9.05 2.83 0.112 C E J
LC 020BD 04 11.13 0.438 1.33 7.61 3.17 0.125 C E J
LC 020BD 05 12.70 0.500 1.15 6.59 3.50 0.138 D F K
LC 020BD 06 14.30 0.563 1.01 5.79 3.84 0.151 D F K
LC 020BD 07 15.88 0.625 0.91 5.18 4.17 0.164 D F K
LC 020BD 08 17.48 0.688 0.82 4.68 4.50 0.177 E G L
LC 020BD 09 19.05 0.750 0.75 4.27 4.84 0.190 E G L
LC 020BD 10 22.23 0.875 0.64 3.63 5.50 0.217 E G L
LC 020BD 11 25.40 1.000 0.55 3.16 6.17 0.243 F H M
LC 020BD 12 31.75 1.250 0.44 2.50 7.51 0.296 F H M
LC 020BD 13 34.93 1.375 0.40 2.27 8.17 0.322 F H M
LC 020BD 14 38.10 1.500 0.36 2.08 8.84 0.348 G J N
LC 020BD 15 44.45 1.750 0.31 1.77 10.17 0.401 G J N
LC 028BD 01 0.71 0.028 3.91 0.154 29.58 6.65 6.35 0.250 9.58 54.73 3.26 0.129 C E J
LC 028BD 02 7.95 0.313 7.23 41.31 3.85 0.152 C E J
LC 028BD 03 9.53 0.375 5.83 33.29 4.42 0.174 C E J
LC 028BD 04 11.13 0.438 4.87 27.80 5.01 0.197 C E J
LC 028BD 05 12.70 0.500 4.19 23.91 5.58 0.220 D F K
LC 028BD 06 14.30 0.563 3.67 20.94 6.16 0.243 D F K
LC 028BD 07 15.88 0.625 3.27 18.66 6.74 0.265 D F K
LC 028BD 08 17.48 0.688 2.94 16.80 7.33 0.288 E G L
LC 028BD 09 19.05 0.750 2.68 15.30 7.90 0.311 E G L
LC 028BD 10 22.23 0.875 2.27 12.96 9.06 0.357 E G L
LC 028BD 11 25.40 1.000 1.97 11.25 10.22 0.402 F H M
LC 028BD 12 31.75 1.250 1.56 8.89 12.54 0.494 F H M
LC 028BD 13 34.93 1.375 1.41 8.05 13.70 0.539 F H M
LC 028BD 14 38.10 1.500 1.29 7.35 14.85 0.585 G J N
LC 028BD 15 44.45 1.750 1.10 6.27 17.17 0.676 G J N
LCM063BE 01† 5.63 0.222 6.10 0.240 0.63 0.025 3.90 0.154 18.02 4.05 8.50 0.335 3.72 21.26 3.45 0.136 F H SPECIAL
LCM063BE 02† 12.50 0.492 2.37 13.53 4.72 0.186 F H SPECIAL
LCM063BE 03† 18.50 0.728 1.52 8.68 6.60 0.260 F H SPECIAL
LCM063BE 04† 26.00 1.024 1.04 5.95 9.14 0.360 F H SPECIAL
LCM063BE 05† 38.50 1.516 0.70 4.02 12.90 0.508 F H SPECIAL
LCM080BF 01† 5.80 0.228 6.30 0.248 0.80 0.032 3.80 0.150 36.28 8.16 8.30 0.327 9.68 55.29 4.39 0.173 G J SPECIAL
LCM080BF 02† 12.00 0.472 6.07 34.66 5.99 0.236 G J SPECIAL
LCM080BF 03† 17.50 0.689 3.99 22.77 8.41 0.331 G J SPECIAL
LCM080BF 04† 24.50 0.965 2.71 15.48 11.61 0.457 G J SPECIAL
LCM080BF 05† 36.00 1.417 1.83 10.46 16.41 0.646 G J SPECIAL
LCM050C 01 6.00 0.236 6.40 0.252 0.50 0.020 4.60 0.180 8.85 1.99 6.50 0.256 1.96 11.18 1.98 0.078 C E SPECIAL
LCM050C 02 8.00 0.315 1.54 8.79 2.26 0.089 C E SPECIAL
LCM050C 03 9.50 0.374 1.27 7.24 2.54 0.100 C E SPECIAL
LCM050C 04 11.00 0.433 1.08 6.15 2.79 0.110 D F SPECIAL
LCM050C 05 12.50 0.492 0.94 5.35 3.07 0.121 D F SPECIAL
LCM050C 06 14.00 0.551 0.83 4.73 3.35 0.132 D F SPECIAL
LCM050C 07 15.50 0.610 0.74 4.24 3.61 0.142 D F SPECIAL
LCM050C 08 17.00 0.669 0.67 3.84 3.89 0.153 D F SPECIAL
LCM050C 09 19.00 0.748 0.60 3.42 4.24 0.167 E G SPECIAL
LCM050C 10 25.00 0.984 0.45 2.56 5.33 0.210 E G SPECIAL
LCM050C 11 27.50 1.083 0.41 2.32 5.77 0.227 E G SPECIAL
LCM050C 12 30.00 1.181 0.37 2.12 6.22 0.245 F H SPECIAL
LCM050C 13 35.00 1.378 0.32 1.81 7.14 0.281 F H SPECIAL
LCM050C 14 40.00 1.575 0.28 1.58 8.03 0.316 F H SPECIAL
LCM050C 15 45.00 1.772 0.25 1.40 8.94 0.352 F H SPECIAL
LCM050C 16 50.00 1.969 0.22 1.26 9.83 0.387 F H SPECIAL
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 57
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
58 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 016C 01 6.10 0.240 6.35 0.250 0.41 0.016 4.98 0.196 5.34 1.20 6.35 0.250 1.09 6.20 1.42 0.056 C E J
LC 016C 02 7.95 0.313 0.84 4.80 1.60 0.063 C E J
LC 016C 03 9.53 0.375 0.68 3.90 1.78 0.070 C E J
LC 016C 04 11.13 0.438 0.58 3.30 1.93 0.076 D F K
LC 016C 05 12.70 0.500 0.51 2.90 2.11 0.083 D F K
LC 016C 06 14.30 0.563 0.46 2.60 2.26 0.089 D F K
LC 016C 07 15.88 0.625 0.40 2.30 2.44 0.096 D F K
LC 016C 08 17.48 0.688 0.37 2.10 2.62 0.103 D F K
LC 016C 09 19.05 0.750 0.33 1.90 2.79 0.110 E G L
LC 016C 10 20.65 0.813 0.30 1.70 2.95 0.116 E G L
LC 016C 11 22.23 0.875 0.28 1.60 3.12 0.123 E G L
LC 016C 12 23.83 0.938 0.26 1.50 3.28 0.129 E G L
LC 016C 13 25.40 1.000 0.25 1.40 3.45 0.136 F H M
LC 016C 14 31.75 1.250 0.19 1.10 4.14 0.163 F H M
LC 016C 15 38.10 1.500 0.16 0.90 4.83 0.190 F H M
LC 016C 16 44.45 1.750 0.14 0.80 5.41 0.213 G J N
LC 016C 17 50.80 2.000 0.12 0.70 6.07 0.239 G J N
LC 018C 01 0.46 0.018 4.90 0.193 7.78 1.75 6.35 0.250 1.65 9.40 1.65 0.065 C E J
LC 018C 02 7.95 0.313 1.28 7.30 1.88 0.074 C E J
LC 018C 03 9.53 0.375 1.03 5.90 2.08 0.082 C E J
LC 018C 04 11.13 0.438 0.88 5.00 2.31 0.091 D F K
LC 018C 05 12.70 0.500 0.75 4.30 2.51 0.099 D F K
LC 018C 06 14.30 0.563 0.67 3.80 2.72 0.107 D F K
LC 018C 07 15.88 0.625 0.60 3.40 2.92 0.115 D F K
LC 018C 08 17.48 0.688 0.54 3.10 3.15 0.124 D F K
LC 018C 09 19.05 0.750 0.49 2.80 3.35 0.132 E G L
LC 018C 10 20.65 0.813 0.46 2.60 3.56 0.140 E G L
LC 018C 11 22.23 0.875 0.42 2.40 3.76 0.148 E G L
LC 018C 12 23.83 0.938 0.39 2.20 3.99 0.157 E G L
LC 018C 13 25.40 1.000 0.37 2.10 4.19 0.165 F H M
LC 018C 14 31.75 1.250 0.30 1.70 5.03 0.198 F H M
LC 018C 15 38.10 1.500 0.23 1.30 5.87 0.231 F H M
LC 018C 16 44.45 1.750 0.21 1.20 6.58 0.259 G J N
LC 018C 17 50.80 2.000 0.18 1.00 7.72 0.304 G J N
LC 020C 01 0.51 0.020 4.85 0.191 8.90 2.00 6.35 0.250 1.93 11.00 2.08 0.082 C E J
LC 020C 02 7.95 0.313 1.51 8.60 2.39 0.094 C E J
LC 020C 03 9.53 0.375 1.19 6.80 2.74 0.108 C E J
LC 020C 04 11.13 0.438 0.98 5.60 3.05 0.120 D F K
LC 020C 05 12.70 0.500 0.86 4.90 3.35 0.132 D F K
LC 020C 06 14.30 0.563 0.77 4.40 3.66 0.144 D F K
LC 020C 07 15.88 0.625 0.67 3.80 4.01 0.158 D F K
LC 020C 08 17.48 0.688 0.61 3.50 4.32 0.170 D F K
LC 020C 09 19.05 0.750 0.56 3.20 4.62 0.182 E G L
LC 020C 10 20.65 0.813 0.51 2.90 4.93 0.194 E G L
LC 020C 11 22.23 0.875 0.47 2.70 5.28 0.208 E G L
LC 020C 12 25.40 1.000 0.42 2.40 5.89 0.232 F H M
LC 020C 13 31.75 1.250 0.33 1.90 7.16 0.282 F H M
LC 020C 14 38.10 1.500 0.28 1.60 8.43 0.332 F H M
LC 020C 15 44.45 1.750 0.23 1.30 9.70 0.382 G J N
LC 020C 16 50.80 2.000 0.21 1.20 10.97 0.432 G J N
LC 022C 00 0.56 0.022 4.75 0.187 14.68 3.30 6.35 0.250 3.20 18.30 2.16 0.085 C E J
LC 022C 0 7.95 0.313 2.47 14.10 2.46 0.097 C E J
LC 022C 01 9.53 0.375 2.10 12.00 2.82 0.111 C E J
LC 022C 02 11.13 0.438 1.75 10.00 3.10 0.122 D F K
LC 022C 03 12.70 0.500 1.58 9.00 3.38 0.133 D F K
LC 022C 04 14.30 0.563 1.40 8.00 3.66 0.144 D F K
LC 022C 05 15.88 0.625 1.23 7.00 3.94 0.155 D F K
LC 022C 06 17.48 0.688 1.05 6.00 4.50 0.177 D F K
LC 022C 07 19.05 0.750 0.96 5.50 4.78 0.188 E G L
LC 022C 08 20.65 0.813 0.88 5.00 5.05 0.199 E G L
LC 022C 09 25.40 1.000 0.75 4.30 5.72 0.225 F H L
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 59
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
60 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 032C 14 6.10 0.240 6.35 0.250 0.81 0.032 4.27 0.168 44.48 10.00 34.93 1.375 2.10 12.00 13.94 0.549 F H M
LC 032C 15 38.10 1.500 1.93 11.00 14.94 0.588 F H M
LC 032C 16 44.45 1.750 1.68 9.60 17.27 0.680 G J N
LC 032C 17 50.80 2.000 1.47 8.40 19.61 0.772 G J N
LC 035C 01 0.89 0.035 4.11 0.162 53.38 12.00 7.95 0.313 15.76 90.00 4.88 0.192 C E J
LC 035C 02 9.53 0.375 12.87 73.50 5.28 0.208 C E J
LC 035C 03 11.13 0.438 10.68 61.00 5.94 0.234 D F K
LC 035C 04 12.70 0.500 9.11 52.00 6.60 0.260 D F K
LC 035C 05 14.30 0.563 7.88 45.00 7.26 0.286 D F K
LC 035C 06 15.88 0.625 7.00 40.00 7.95 0.313 D F K
LC 035C 07 17.48 0.688 6.30 36.00 8.61 0.339 D F K
LC 035C 08 19.05 0.750 5.60 32.00 9.27 0.365 E G L
LC 035C 09 20.65 0.813 5.13 29.30 9.96 0.392 E G L
LC 035C 10 22.23 0.875 4.73 27.00 10.62 0.418 E G L
LC 035C 11 23.83 0.938 4.27 24.40 11.73 0.462 E G L
LC 035C 12 25.40 1.000 4.03 23.00 12.45 0.490 F H M
LC 035C 13 31.75 1.250 3.15 18.00 15.16 0.597 F H M
LC 035C 14 34.93 1.375 2.80 16.00 16.51 0.650 F H M
LC 035C 15 38.10 1.500 2.59 14.80 17.83 0.702 F H M
LC 035C 16 44.45 1.750 2.17 12.40 20.50 0.807 G J N
LC 035C 17 50.80 2.000 1.93 11.00 23.19 0.913 G J N
LC 035C 18 57.15 2.250 1.72 9.80 25.83 1.017 H K P
LC 035C 19 63.50 2.500 1.56 8.90 28.47 1.121 H K P
LC 038C 01 0.97 0.038 3.96 0.156 71.17 16.00 7.95 0.313 22.24 127.00 4.85 0.191 C E J
LC 038C 02 9.53 0.375 17.69 101.00 5.56 0.219 C E J
LC 038C 03 11.13 0.438 14.71 84.00 6.30 0.248 D F K
LC 038C 04 12.70 0.500 12.61 72.00 7.26 0.286 D F K
LC 038C 05 14.30 0.563 11.21 64.00 7.75 0.305 D F K
LC 038C 06 15.88 0.625 9.98 57.00 8.48 0.334 D F K
LC 038C 07 17.48 0.688 8.93 51.00 9.19 0.362 D F K
LC 038C 08 19.05 0.750 8.05 46.00 9.91 0.390 E G L
LC 038C 09 20.65 0.813 7.35 42.00 10.64 0.419 E G L
LC 038C 10 22.23 0.875 6.65 38.00 11.61 0.457 E G L
LC 038C 11 23.83 0.938 6.13 35.00 12.60 0.496 E G L
LC 038C 12 25.40 1.000 5.78 33.00 13.31 0.524 F H M
LC 038C 13 28.58 1.125 5.08 29.00 14.76 0.581 F H M
LC 038C 14 31.75 1.250 4.55 26.00 16.43 0.647 F H M
LC 038C 15 34.93 1.375 4.03 23.00 18.16 0.715 F H M
LC 038C 16 38.10 1.500 3.68 21.00 19.61 0.772 F H M
LC 038C 17 44.45 1.750 3.15 18.00 22.33 0.879 G J N
LC 038C 18 50.80 2.000 2.80 16.00 25.25 0.994 G J N
LC 038C 19 57.15 2.250 2.49 14.20 28.96 1.140 H K P
LC 038C 20 63.50 2.500 2.21 12.60 31.50 1.240 H K P
LC 040C 01 1.02 0.040 3.86 0.152 75.62 17.00 7.95 0.313 27.14 155.00 5.44 0.214 E G L
LC 040C 02 9.53 0.375 21.36 122.00 6.30 0.248 E G L
LC 040C 03 11.13 0.438 17.51 100.00 7.16 0.282 E G L
LC 040C 04 12.70 0.500 14.71 84.00 7.98 0.314 E G L
LC 040C 05 14.30 0.563 12.96 74.00 8.89 0.350 F H M
LC 040C 06 15.88 0.625 11.73 67.00 9.70 0.382 F H M
LC 040C 07 17.48 0.688 10.51 60.00 10.52 0.414 F H M
LC 040C 08 19.05 0.750 9.98 57.00 10.92 0.430 F H M
LC 040C 09 20.65 0.813 8.49 48.50 12.24 0.482 G J N
LC 040C 10 22.23 0.875 8.05 46.00 13.06 0.514 G J N
LC 040C 11 23.83 0.938 7.35 42.00 13.97 0.550 G J N
LC 040C 12 25.40 1.000 6.88 39.30 14.78 0.582 H K P
LC 040C 13 28.58 1.125 6.13 35.00 16.51 0.650 H K P
LC 040C 14 31.75 1.250 5.43 31.00 18.16 0.715 H K P
LC 040C 15 34.93 1.375 4.82 27.50 19.86 0.782 J L Q
LC 040C 16 38.10 1.500 4.50 25.70 21.97 0.865 J L Q
LC 040C 17 44.45 1.750 3.80 21.70 24.94 0.982 J L Q
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 61
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
62 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 026CD 05 6.35 0.250 6.76 0.266 0.66 0.026 4.78 0.188 26.53 5.96 15.88 0.625 2.31 13.18 4.51 0.177 D F K
LC 026CD 06 17.48 0.688 2.07 11.81 4.87 0.192 E G L
LC 026CD 07 19.05 0.750 1.87 10.70 5.23 0.206 E G L
LC 026CD 08 20.65 0.813 1.71 9.76 5.61 0.221 E G L
LC 026CD 09 22.23 0.875 1.57 8.98 5.98 0.235 E G L
LC 026CD 10 23.83 0.938 1.45 8.29 6.36 0.251 F H M
LC 026CD 11 25.40 1.000 1.30 7.40 6.84 0.269 F H M
LC 026CD 12 31.75 1.250 1.12 6.37 7.87 0.310 F H M
LC 026CD 13 38.10 1.500 0.92 5.27 9.23 0.363 G J N
LC 026CD 14 44.45 1.750 0.79 4.50 10.58 0.417 G J N
LC 026CD 15 50.80 2.000 0.69 3.92 11.94 0.470 G J N
LC 035CD 01 0.89 0.035 4.37 0.172 44.10 9.91 7.95 0.313 13.14 75.05 4.59 0.181 C E J
LC 035CD 02 9.53 0.375 10.47 59.80 5.30 0.209 C E J
LC 035CD 03 11.13 0.438 8.68 49.56 6.01 0.237 D F K
LC 035CD 04 12.70 0.500 7.43 42.41 6.72 0.265 D F K
LC 035CD 05 14.30 0.563 6.48 36.99 7.44 0.293 D F K
LC 035CD 06 15.88 0.625 5.75 32.86 8.14 0.321 D F K
LC 035CD 07 17.48 0.688 5.17 29.51 8.86 0.349 D F K
LC 035CD 08 19.05 0.750 4.70 26.82 9.56 0.377 E G L
LC 035CD 09 20.65 0.813 4.30 24.55 10.28 0.405 E G L
LC 035CD 10 22.23 0.875 3.97 22.66 10.98 0.432 E G L
LC 035CD 11 23.83 0.938 3.68 21.01 11.70 0.461 E G L
LC 035CD 12 25.40 1.000 3.43 19.61 12.41 0.488 F H M
LC 035CD 13 31.75 1.250 2.71 15.46 15.25 0.600 F H M
LC 035CD 14 34.93 1.375 2.45 13.98 16.67 0.656 F H M
LC 035CD 15 38.10 1.500 2.23 12.75 18.09 0.712 F H M
LC 035CD 16 44.45 1.750 1.90 10.86 20.93 0.824 G J N
LC 035CD 17 50.80 2.000 1.65 9.45 23.78 0.936 G J N
LC 035CD 18 57.15 2.250 1.46 8.37 26.62 1.048 H K P
LC 035CD 19 63.50 2.500 1.31 7.51 29.46 1.160 H K P
LCM050CE 01 6.80 0.268 7.50 0.295 0.50 0.020 5.30 0.209 7.60 1.71 13.50 0.531 0.74 4.22 2.74 0.108 F H SPECIAL
LCM050CE 02 20.00 0.787 0.47 2.68 3.76 0.148 F H SPECIAL
LCM050CE 03 30.00 1.181 0.30 1.74 5.26 0.207 F H SPECIAL
LCM050CE 04 44.00 1.732 0.21 1.18 7.24 0.285 F H SPECIAL
LCM050CE 05 65.00 2.559 0.14 0.80 10.26 0.404 F H SPECIAL
LCM063CF 01 6.93 0.273 7.60 0.299 0.63 0.025 5.10 0.201 14.54 3.27 11.50 0.453 1.86 10.63 3.45 0.136 F H SPECIAL
LCM063CF 02 17.00 0.669 1.18 6.76 4.72 0.186 F H SPECIAL
LCM063CF 03 25.50 1.004 0.77 4.38 6.60 0.260 F H SPECIAL
LCM063CF 04 36.50 1.437 0.52 2.98 9.14 0.360 F H SPECIAL
LCM063CF 05 54.00 2.126 0.35 2.01 12.90 0.508 F H SPECIAL
LCM080CG 01 7.10 0.280 7.70 0.303 0.80 0.032 5.00 0.197 29.00 6.52 10.50 0.413 4.84 27.64 4.39 0.173 G J SPECIAL
LCM080CG 02 15.50 0.610 3.08 17.59 5.99 0.236 G J SPECIAL
LCM080CG 03 23.00 0.906 1.99 11.38 8.41 0.331 G J SPECIAL
LCM080CG 04 33.00 1.299 1.36 7.74 11.61 0.457 G J SPECIAL
LCM080CG 05 48.00 1.890 0.92 5.23 16.41 0.646 G J SPECIAL
LC 028CE 01 7.14 0.281 7.95 0.313 0.71 0.028 5.51 0.217 18.00 4.05 6.35 0.250 5.17 29.55 2.87 0.113 C E J
LC 028CE 02 7.95 0.313 3.91 22.31 3.33 0.131 C E J
LC 028CE 03 9.53 0.375 3.15 17.97 3.78 0.149 C E J
LC 028CE 04 11.13 0.438 2.63 15.01 4.23 0.167 C E J
LC 028CE 05 12.70 0.500 2.26 12.91 4.68 0.184 D F K
LC 028CE 06 14.30 0.563 1.98 11.31 5.14 0.202 D F K
LC 028CE 07 15.88 0.625 1.76 10.08 5.59 0.220 D F K
LC 028CE 08 19.05 0.750 1.45 8.26 6.50 0.256 E G L
LC 028CE 09 22.23 0.875 1.23 7.00 7.40 0.292 E G L
LC 028CE 10 25.40 1.000 1.06 6.07 8.31 0.327 F H M
LC 028CE 11 31.75 1.250 0.84 4.80 10.12 0.399 F H M
LC 028CE 12 34.93 1.375 0.76 4.35 11.03 0.434 F H M
LC 028CE 13 38.10 1.500 0.70 3.97 11.94 0.470 G J N
LCM100CH 01 7.30 0.287 7.80 0.307 1.00 0.039 4.90 0.193 52.64 11.83 10.00 0.394 11.82 67.48 5.51 0.217 G J SPECIAL
LCM100CH 02 14.50 0.571 7.52 42.94 7.49 0.295 G J SPECIAL
LCM100CH 03 21.50 0.846 4.87 27.79 10.49 0.413 G J SPECIAL
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 63
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
64 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LCM095D 01 7.50 0.295 8.00 0.315 0.95 0.037 5.10 0.201 54.00 12.14 9.50 0.374 10.84 61.91 4.52 0.178 C E SPECIAL
LCM095D 02 11.00 0.433 9.05 51.71 5.05 0.199 C E SPECIAL
LCM095D 03 12.50 0.492 7.77 44.39 5.56 0.219 C E SPECIAL
LCM095D 04 14.00 0.551 6.81 38.89 6.07 0.239 D F SPECIAL
LCM095D 05 15.50 0.610 6.06 34.60 6.60 0.260 D F SPECIAL
LCM095D 06 17.00 0.669 5.46 31.16 7.11 0.280 D F SPECIAL
LCM095D 07 19.00 0.748 4.82 27.52 7.80 0.307 D F SPECIAL
LCM095D 08 21.00 0.827 4.31 24.64 8.51 0.335 E G SPECIAL
LCM095D 09 23.00 0.906 3.90 22.30 9.19 0.362 E G SPECIAL
LCM095D 10 25.00 0.984 3.57 20.37 9.88 0.389 E G SPECIAL
LCM095D 11 27.50 1.083 3.22 18.38 10.74 0.423 F H SPECIAL
LCM095D 12 30.00 1.181 2.93 16.75 11.61 0.457 F H SPECIAL
LCM095D 13 35.00 1.378 2.49 14.22 13.34 0.525 F H SPECIAL
LCM095D 14 40.00 1.575 2.16 12.35 15.06 0.593 G J SPECIAL
LCM095D 15 45.00 1.772 1.91 10.92 16.79 0.661 G J SPECIAL
LCM095D 16 50.00 1.969 1.71 9.78 18.52 0.729 G J SPECIAL
LCM095D 17 55.00 2.165 1.55 8.86 20.24 0.797 H K SPECIAL
LCM095D 18 60.00 2.362 1.42 8.10 21.97 0.865 H K SPECIAL
LCM095D 19 65.00 2.559 1.31 7.46 23.70 0.933 H K SPECIAL
LCM125DA 01† 7.55 0.297 8.10 0.319 1.25 0.049 4.70 0.185 140.35 31.55 12.00 0.472 28.85 164.74 6.88 0.271 G J SPECIAL
LCM125DA 02† 17.00 0.669 18.36 104.84 9.37 0.369 G J SPECIAL
LCM125DA 03† 25.00 0.984 11.77 67.20 13.13 0.517 G J SPECIAL
LCM125DA 04† 35.50 1.398 8.09 46.20 18.14 0.714 G J SPECIAL
LCM125DA 05† 51.50 2.028 5.46 31.17 25.63 1.009 G J SPECIAL
LC 022D 00 7.62 0.300 7.95 0.313 0.56 0.022 6.10 0.240 11.12 2.50 9.53 0.375 1.44 8.20 2.24 0.088 C E J
LC 022D 0 11.13 0.438 1.19 6.80 2.46 0.097 C E J
LC 022D 01 12.70 0.500 1.14 6.50 2.69 0.106 C E J
LC 022D 02 14.30 0.563 1.05 6.00 2.82 0.111 D F K
LC 022D 03 15.88 0.625 0.88 5.00 3.10 0.122 D F K
LC 022D 04 17.48 0.688 0.79 4.50 3.25 0.128 D F K
LC 022D 05 19.05 0.750 0.70 4.00 3.38 0.133 D F K
LC 022D 06 20.65 0.813 0.61 3.50 3.94 0.155 E G L
LC 022D 07 22.23 0.875 0.53 3.00 4.22 0.166 E G L
LC 022D 08 25.40 1.000 0.49 2.80 4.60 0.181 E G L
LC 022D 09 31.75 1.250 0.40 2.30 5.26 0.207 F H M
LC 022D 10 38.10 1.500 0.35 2.00 5.79 0.228 F H M
LC 022D 11 44.45 1.750 0.30 1.70 6.83 0.269 G J N
LC 022D 12 50.80 2.000 0.25 1.40 7.95 0.313 G J N
LC 022D 13 57.15 2.250 0.21 1.20 9.07 0.357 H K P
LC 022D 14 63.50 2.500 0.19 1.10 9.93 0.391 H K P
LC 026D 01 0.66 0.026 5.94 0.234 19.13 4.30 11.13 0.438 2.28 13.00 3.00 0.118 C E J
LC 026D 02 12.70 0.500 2.01 11.50 3.33 0.131 C E J
LC 026D 03 14.30 0.563 1.75 10.00 3.66 0.144 D F K
LC 026D 04 15.88 0.625 1.58 9.00 3.84 0.151 D F K
LC 026D 05 17.48 0.688 1.40 8.00 4.17 0.164 D F K
LC 026D 06 19.05 0.750 1.31 7.50 4.32 0.170 D F K
LC 026D 07 20.65 0.813 1.23 7.00 4.65 0.183 E G L
LC 026D 08 22.23 0.875 1.05 6.00 5.23 0.206 E G L
LC 026D 09 23.83 0.938 0.96 5.50 5.31 0.209 E G L
LC 026D 10 25.40 1.000 0.88 5.00 5.82 0.229 F H M
LC 026D 11 31.75 1.250 0.75 4.30 6.48 0.255 F H M
LC 026D 12 38.10 1.500 0.61 3.50 7.65 0.301 F H M
LC 026D 13 44.45 1.750 0.53 3.00 8.71 0.343 G J N
LC 026D 14 50.80 2.000 0.46 2.60 9.75 0.384 G J N
LC 026D 15 57.15 2.250 0.40 2.30 11.07 0.436 H K P
LC 026D 16 63.50 2.500 0.37 2.10 12.17 0.479 H K P
LC 030D 01 0.76 0.030 5.79 0.228 26.69 6.00 11.13 0.438 3.50 20.00 3.89 0.153 C E J
LC 030D 02 12.70 0.500 2.98 17.00 4.27 0.168 C E J
LC 030D 03 14.30 0.563 2.63 15.00 4.65 0.183 D F K
LC 030D 04 15.88 0.625 2.33 13.30 5.03 0.198 D F K
LC 030D 05 17.48 0.688 2.10 12.00 5.41 0.213 D F K
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 65
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
66 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 038D 16 7.62 0.300 7.95 0.313 0.97 0.038 5.38 0.212 54.71 12.30 44.45 1.750 1.98 11.30 16.81 0.662 G J N
LC 038D 17 50.80 2.000 1.66 9.50 19.61 0.772 H K P
LC 038D 18 57.15 2.250 1.51 8.60 21.79 0.858 H K P
LC 038D 19 63.50 2.500 1.35 7.70 23.98 0.944 H K P
LC 040D 01 1.02 0.040 5.31 0.209 64.50 14.50 9.53 0.375 14.01 80.00 4.95 0.195 E G L
LC 040D 02 11.13 0.438 11.91 68.00 5.54 0.218 E G L
LC 040D 03 12.70 0.500 9.98 57.00 6.15 0.242 E G L
LC 040D 04 14.30 0.563 8.58 49.00 6.65 0.262 F H M
LC 040D 05 15.88 0.625 7.70 44.00 7.37 0.290 F H M
LC 040D 06 17.48 0.688 6.83 39.00 7.98 0.314 F H M
LC 040D 07 19.05 0.750 6.13 35.00 8.69 0.342 F H M
LC 040D 08 20.65 0.813 5.60 32.00 9.30 0.366 G J N
LC 040D 09 22.23 0.875 5.25 30.00 10.01 0.394 G J N
LC 040D 10 23.83 0.938 4.90 28.00 10.16 0.400 G J N
LC 040D 11 25.40 1.000 4.55 26.00 10.92 0.430 H K P
LC 040D 12 28.58 1.125 4.03 23.00 12.04 0.474 H K P
LC 040D 13 31.75 1.250 3.50 20.00 13.00 0.512 H K P
LC 040D 14 34.93 1.375 3.15 18.00 13.97 0.550 H K P
LC 040D 15 38.10 1.500 2.80 16.00 16.51 0.650 J L Q
LC 040D 16 44.45 1.750 2.45 14.00 17.53 0.690 J L Q
LC 040D 17 50.80 2.000 2.10 12.00 20.57 0.810 K M R
LC 040D 18 57.15 2.250 1.87 10.70 23.04 0.907 K M R
LC 040D 19 63.50 2.500 1.68 9.60 25.40 1.000 K M R
LC 042D 01 1.07 0.042 5.21 0.205 72.50 16.30 9.53 0.375 18.39 105.00 5.11 0.201 E G L
LC 042D 02 11.13 0.438 15.41 88.00 5.59 0.220 E G L
LC 042D 03 12.70 0.500 12.26 70.00 6.43 0.253 E G L
LC 042D 04 14.30 0.563 10.51 60.00 7.24 0.285 F H M
LC 042D 05 15.88 0.625 9.11 52.00 8.03 0.316 F H M
LC 042D 06 17.48 0.688 8.05 46.00 8.56 0.337 F H M
LC 042D 07 19.05 0.750 7.35 42.00 9.09 0.358 F H M
LC 042D 08 20.65 0.813 6.65 38.00 9.91 0.390 G J N
LC 042D 09 22.23 0.875 5.95 34.00 10.69 0.421 G J N
LC 042D 10 23.83 0.938 5.60 32.00 11.48 0.452 G J N
LC 042D 11 25.40 1.000 5.25 30.00 12.04 0.474 H K P
LC 042D 12 28.58 1.125 4.90 28.00 12.85 0.506 H K P
LC 042D 13 31.75 1.250 4.20 24.00 14.71 0.579 H K P
LC 042D 14 34.93 1.375 3.85 22.00 16.03 0.631 H K P
LC 042D 15 38.10 1.500 3.50 20.00 17.09 0.673 J L Q
LC 042D 16 44.45 1.750 2.89 16.50 19.96 0.786 J L Q
LC 042D 17 50.80 2.000 2.54 14.50 22.45 0.884 K M R
LC 042D 18 57.15 2.250 2.28 13.00 25.27 0.995 K M R
LC 042D 19 63.50 2.500 2.03 11.60 27.41 1.079 K M R
LC 045D 01 1.14 0.045 5.05 0.199 88.07 19.80 9.53 0.375 21.71 124.00 5.74 0.226 E G L
LC 045D 02 11.13 0.438 18.04 103.00 6.60 0.260 E G L
LC 045D 03 12.70 0.500 15.76 90.00 6.88 0.271 E G L
LC 045D 04 14.30 0.563 13.48 77.00 8.03 0.316 F H M
LC 045D 05 15.88 0.625 12.08 69.00 8.61 0.339 F H M
LC 045D 06 17.48 0.688 10.68 61.00 9.45 0.372 F H M
LC 045D 07 19.05 0.750 9.63 55.00 10.31 0.406 F H M
LC 045D 08 20.65 0.813 8.93 51.00 10.59 0.417 G J N
LC 045D 09 22.23 0.875 8.05 46.00 11.46 0.451 G J N
LC 045D 10 23.83 0.938 7.35 42.00 12.60 0.496 G J N
LC 045D 11 25.40 1.000 7.00 40.00 13.16 0.518 H K P
LC 045D 12 28.58 1.125 6.30 36.00 14.33 0.564 H K P
LC 045D 13 31.75 1.250 5.60 32.00 16.03 0.631 H K P
LC 045D 14 34.93 1.375 5.08 29.00 16.87 0.664 H K P
LC 045D 15 38.10 1.500 4.55 26.00 18.87 0.743 J L Q
LC 045D 16 44.45 1.750 3.85 22.00 21.84 0.860 J L Q
LC 045D 17 50.80 2.000 3.33 19.00 24.38 0.960 K M R
LC 045D 18 57.15 2.250 2.98 17.00 27.43 1.080 K M R
LC 045D 19 63.50 2.500 2.68 15.30 30.25 1.191 K M R
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 67
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
68 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 016DE 01 7.92 0.312 8.33 0.328 0.41 0.016 6.76 0.266 2.46 0.55 6.35 0.250 0.50 2.84 1.39 0.055 C E J
LC 016DE 02 7.95 0.313 0.39 2.21 1.55 0.061 C E J
LC 016DE 03 9.53 0.375 0.32 1.80 1.72 0.068 C E J
LC 016DE 04 11.13 0.438 0.27 1.52 1.88 0.074 C E J
LC 016DE 05 12.70 0.500 0.23 1.32 2.04 0.080 D F K
LC 016DE 06 14.30 0.563 0.20 1.17 2.19 0.086 D F K
LC 016DE 07 15.88 0.625 0.18 1.04 2.36 0.093 D F K
LC 016DE 08 17.48 0.688 0.17 0.94 2.52 0.099 D F K
LC 016DE 09 19.05 0.750 0.15 0.86 2.68 0.105 E G L
LC 016DE 10 20.65 0.813 0.14 0.79 2.84 0.112 E G L
LC 016DE 11 22.23 0.875 0.13 0.73 3.00 0.118 E G L
LC 016DE 12 23.83 0.938 0.12 0.68 3.16 0.124 E G L
LC 016DE 13 25.40 1.000 0.11 0.64 3.32 0.131 F H M
LC 016DE 14 31.75 1.250 0.09 0.51 3.96 0.156 F H M
LC 016DE 15 38.10 1.500 0.07 0.42 4.60 0.181 F H M
LC 016DE 16 44.45 1.750 0.06 0.36 5.24 0.206 G J N
LC 016DE 17 50.80 2.000 0.06 0.31 5.89 0.232 G J N
LC 023DE 01 0.58 0.023 6.48 0.255 5.32 1.20 9.53 0.375 0.86 4.91 3.34 0.131 C E J
LC 023DE 02 11.13 0.438 0.72 4.12 3.74 0.147 C E J
LC 023DE 03 12.70 0.500 0.62 3.55 4.15 0.163 D F K
LC 023DE 04 14.30 0.563 0.55 3.12 4.55 0.179 D F K
LC 023DE 05 15.88 0.625 0.49 2.79 4.96 0.195 D F K
LC 023DE 06 17.48 0.688 0.44 2.51 5.36 0.211 D F K
LC 023DE 07 19.05 0.750 0.40 2.29 5.77 0.227 E G L
LC 023DE 08 20.65 0.813 0.37 2.10 6.17 0.243 E G L
LC 023DE 09 22.23 0.875 0.34 1.95 6.58 0.259 E G L
LC 023DE 10 23.83 0.938 0.32 1.81 6.99 0.275 E G L
LC 023DE 11 25.40 1.000 0.30 1.69 7.39 0.291 F H M
LC 023DE 12 31.75 1.250 0.23 1.34 9.01 0.355 F H M
LC 023DE 13 34.93 1.375 0.21 1.21 9.82 0.387 F H M
LC 023DE 14 38.10 1.500 0.19 1.11 10.63 0.419 G J N
LC 023DE 15 44.45 1.750 0.17 0.95 12.25 0.482 G J N
LC 023DE 16 50.80 2.000 0.14 0.83 13.87 0.546 G J N
LC 023DE 17 57.15 2.250 0.13 0.73 15.49 0.610 H K P
LC 023DE 18 63.50 2.500 0.12 0.66 17.11 0.674 H K P
LC 026DE 01 0.66 0.026 6.30 0.248 10.75 2.42 11.13 0.438 1.46 8.33 3.75 0.148 D F K
LC 026DE 02 12.70 0.500 1.26 7.18 4.14 0.163 D F K
LC 026DE 03 14.30 0.563 1.10 6.29 4.53 0.178 D F K
LC 026DE 04 15.88 0.625 0.98 5.61 4.91 0.193 D F K
LC 026DE 05 17.48 0.688 0.88 5.05 5.30 0.209 E G L
LC 026DE 06 19.05 0.750 0.81 4.61 5.69 0.224 E G L
LC 026DE 07 20.65 0.813 0.74 4.22 6.08 0.239 E G L
LC 026DE 08 22.23 0.875 0.68 3.91 6.46 0.254 E G L
LC 026DE 09 23.83 0.938 0.64 3.63 6.85 0.270 F H M
LC 026DE 10 25.40 1.000 0.59 3.39 7.24 0.285 F H M
LC 026DE 11 31.75 1.250 0.47 2.68 8.79 0.346 F H M
LC 026DE 12 38.10 1.500 0.39 2.22 10.34 0.407 G J N
LC 026DE 13 44.45 1.750 0.33 1.89 11.89 0.468 G J N
LC 026DE 14 50.80 2.000 0.29 1.65 13.44 0.529 G J N
LC 026DE 15 57.15 2.250 0.26 1.46 14.99 0.590 H K P
LC 026DE 16 63.50 2.500 0.23 1.31 16.54 0.651 H K P
LC 047DE 01 1.19 0.047 5.28 0.208 59.08 13.28 9.53 0.375 20.35 116.19 6.62 0.261 E G L
LC 047DE 02 11.13 0.438 16.62 94.91 7.55 0.297 E G L
LC 047DE 03 12.70 0.500 14.08 80.42 8.47 0.334 E G L
LC 047DE 04 14.30 0.563 12.22 69.76 9.39 0.370 E G L
LC 047DE 05 15.88 0.625 10.77 61.49 10.32 0.406 F H M
LC 047DE 06 17.48 0.688 9.64 55.06 11.24 0.443 F H M
LC 047DE 07 19.05 0.750 8.71 49.77 12.17 0.479 F H M
LC 047DE 08 20.65 0.813 7.96 45.47 13.09 0.516 F H M
LC 047DE 09 22.23 0.875 7.32 41.81 14.03 0.552 G J N
LC 047DE 10 23.83 0.938 6.78 38.73 14.95 0.588 G J N
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 69
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
70 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LCM110E 01 9.00 0.354 9.50 0.374 1.10 0.043 6.30 0.248 70.59 15.87 11.00 0.433 11.85 67.70 5.05 0.199 E G SPECIAL
LCM110E 02 12.50 0.492 10.14 57.90 5.54 0.218 E G SPECIAL
LCM110E 03 14.00 0.551 8.84 50.50 6.02 0.237 E G SPECIAL
LCM110E 04 15.50 0.610 7.84 44.80 6.50 0.256 E G SPECIAL
LCM110E 05 17.00 0.669 7.06 40.30 6.99 0.275 F H SPECIAL
LCM110E 06 19.00 0.748 6.22 35.50 7.65 0.301 F H SPECIAL
LCM110E 07 21.00 0.827 5.55 31.70 8.28 0.326 F H SPECIAL
LCM110E 08 23.00 0.906 5.03 28.70 8.94 0.352 F H SPECIAL
LCM110E 09 25.00 0.984 4.57 26.10 9.58 0.377 F H SPECIAL
LCM110E 10 27.50 1.083 4.13 23.60 10.39 0.409 G J SPECIAL
LCM110E 11 30.00 1.181 3.75 21.40 11.20 0.441 G J SPECIAL
LCM110E 12 35.00 1.378 3.19 18.20 12.80 0.504 G J SPECIAL
LCM110E 13 40.00 1.575 2.77 15.80 14.43 0.568 H K SPECIAL
LCM110E 14 45.00 1.772 2.43 13.90 16.05 0.632 H K SPECIAL
LCM110E 15 50.00 1.969 2.19 12.50 17.68 0.696 H K SPECIAL
LCM110E 16 55.00 2.165 1.98 11.29 19.28 0.759 J L SPECIAL
LCM110E 17 60.00 2.362 1.80 10.30 20.90 0.823 J L SPECIAL
LCM110E 18 65.00 2.559 1.66 9.50 22.53 0.887 K M SPECIAL
LC 026E 01 9.14 0.360 9.53 0.375 0.66 0.026 7.39 0.291 15.57 3.50 12.70 0.500 1.58 9.00 2.74 0.108 C E J
LC 026E 02 14.30 0.563 1.40 8.00 2.92 0.115 C E J
LC 026E 03 15.88 0.625 1.23 7.00 3.15 0.124 D F K
LC 026E 04 17.48 0.688 1.14 6.50 3.33 0.131 D F K
LC 026E 05 19.05 0.750 1.05 6.00 3.51 0.138 D F K
LC 026E 06 20.65 0.813 0.96 5.50 3.66 0.144 E G L
LC 026E 07 22.23 0.875 0.88 5.00 3.84 0.151 E G L
LC 026E 08 23.83 0.938 0.79 4.50 3.99 0.157 E G L
LC 026E 09 25.40 1.000 0.70 4.00 4.32 0.170 F H M
LC 026E 10 28.58 1.125 0.61 3.50 4.83 0.190 F H M
LC 026E 11 31.75 1.250 0.58 3.30 5.33 0.210 F H M
LC 026E 12 38.10 1.500 0.47 2.70 6.07 0.239 G J N
LC 026E 13 44.45 1.750 0.42 2.40 6.35 0.250 G J N
LC 026E 14 50.80 2.000 0.37 2.10 7.06 0.278 H K P
LC 026E 15 57.15 2.250 0.33 1.90 8.05 0.317 H K P
LC 029E 01 0.74 0.029 7.32 0.288 20.02 4.50 12.70 0.500 2.14 12.20 3.58 0.141 C E J
LC 029E 02 14.30 0.563 1.87 10.70 3.84 0.151 D F K
LC 029E 03 15.88 0.625 1.68 9.60 4.09 0.161 D F K
LC 029E 04 17.48 0.688 1.51 8.60 4.34 0.171 D F K
LC 029E 05 19.05 0.750 1.33 7.60 4.60 0.181 D F K
LC 029E 06 20.65 0.813 1.23 7.00 4.88 0.192 E G L
LC 029E 07 22.23 0.875 1.14 6.50 5.13 0.202 E G L
LC 029E 08 23.83 0.938 1.07 6.10 5.41 0.213 E G L
LC 029E 09 25.40 1.000 1.00 5.70 5.64 0.222 F H M
LC 029E 10 28.58 1.125 0.88 5.00 6.15 0.242 F H M
LC 029E 11 31.75 1.250 0.77 4.40 6.71 0.264 F H M
LC 029E 12 34.93 1.375 0.70 4.00 7.19 0.283 F H M
LC 029E 13 38.10 1.500 0.65 3.70 7.72 0.304 G J N
LC 029E 14 44.45 1.750 0.56 3.20 8.48 0.334 G J N
LC 029E 15 50.80 2.000 0.47 2.70 9.75 0.384 H K P
LC 032E 0 0.81 0.032 7.16 0.282 28.02 6.30 9.53 0.375 4.47 25.50 3.05 0.120 C E J
LC 032E 01 12.70 0.500 3.15 18.00 3.68 0.145 C E J
LC 032E 02 14.30 0.563 2.80 16.00 4.09 0.161 D F K
LC 032E 03 15.88 0.625 2.54 14.50 4.29 0.169 D F K
LC 032E 04 17.48 0.688 2.28 13.00 4.50 0.177 D F K
LC 032E 05 19.05 0.750 2.10 12.00 4.70 0.185 D F K
LC 032E 06 20.65 0.813 1.93 11.00 5.11 0.201 E G L
LC 032E 07 22.23 0.875 1.75 10.00 5.31 0.209 E G L
LC 032E 08 23.83 0.938 1.66 9.50 5.72 0.225 E G L
LC 032E 09 25.40 1.000 1.49 8.50 6.12 0.241 F H M
LC 032E 10 28.58 1.125 1.31 7.50 6.73 0.265 F H M
LC 032E 11 31.75 1.250 1.23 7.00 7.04 0.277 F H M
LC 032E 12 34.93 1.375 1.14 6.50 7.54 0.297 F H M
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 71
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
72 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 042E 01 9.14 0.360 9.53 0.375 1.07 0.042 6.71 0.264 60.05 13.50 11.13 0.438 9.81 56.00 5.11 0.201 E G L
LC 042E 02 12.70 0.500 8.05 46.00 5.64 0.222 E G L
LC 042E 03 14.30 0.563 7.35 42.00 5.89 0.232 E G L
LC 042E 04 15.88 0.625 6.48 37.00 6.43 0.253 E G L
LC 042E 05 17.48 0.688 5.78 33.00 6.96 0.274 F H M
LC 042E 06 19.05 0.750 5.43 31.00 7.24 0.285 F H M
LC 042E 07 20.65 0.813 4.90 28.00 7.77 0.306 F H M
LC 042E 08 22.23 0.875 4.38 25.00 8.56 0.337 F H M
LC 042E 09 23.83 0.938 4.03 23.00 9.12 0.359 F H M
LC 042E 10 25.40 1.000 3.68 21.00 9.63 0.379 G J N
LC 042E 11 28.58 1.125 3.33 19.00 10.44 0.411 G J N
LC 042E 12 31.75 1.250 2.98 17.00 11.51 0.453 G J N
LC 042E 13 34.93 1.375 2.80 16.00 12.32 0.485 H K P
LC 042E 14 38.10 1.500 2.54 14.50 13.39 0.527 H K P
LC 042E 15 44.45 1.750 2.10 12.00 15.60 0.614 H K P
LC 042E 16 50.80 2.000 1.84 10.50 17.20 0.677 J L Q
LC 042E 17 57.15 2.250 1.58 9.00 19.53 0.769 J L Q
LC 042E 18 63.50 2.500 1.45 8.30 21.59 0.850 J L Q
LC 045E 01 1.14 0.045 6.55 0.258 73.39 16.50 11.13 0.438 13.13 75.00 5.46 0.215 E G L
LC 045E 02 12.70 0.500 11.38 65.00 5.89 0.232 E G L
LC 045E 03 14.30 0.563 9.63 55.00 6.60 0.260 E G L
LC 045E 04 15.88 0.625 8.58 49.00 6.88 0.271 E G L
LC 045E 05 17.48 0.688 7.70 44.00 7.47 0.294 F H M
LC 045E 06 19.05 0.750 7.00 40.00 8.03 0.316 F H M
LC 045E 07 20.65 0.813 6.48 37.00 8.61 0.339 F H M
LC 045E 08 22.23 0.875 5.78 33.00 9.17 0.361 F H M
LC 045E 09 23.83 0.938 5.25 30.00 10.03 0.395 F H M
LC 045E 10 25.40 1.000 4.90 28.00 10.59 0.417 G J N
LC 045E 11 28.58 1.125 4.38 25.00 11.46 0.451 G J N
LC 045E 12 31.75 1.250 3.85 22.00 13.00 0.512 G J N
LC 045E 13 34.93 1.375 3.50 20.00 13.74 0.541 H K P
LC 045E 14 38.10 1.500 3.15 18.00 14.88 0.586 H K P
LC 045E 15 44.45 1.750 2.71 15.50 17.30 0.681 H K P
LC 045E 16 50.80 2.000 2.33 13.30 19.35 0.762 J L Q
LC 045E 17 57.15 2.250 2.07 11.80 21.62 0.851 J L Q
LC 045E 18 63.50 2.500 1.86 10.60 24.00 0.945 J L Q
LC 045E 19 69.85 2.750 1.65 9.40 26.54 1.045 J L Q
LC 047E 01 1.19 0.047 6.45 0.254 92.52 20.80 11.13 0.438 16.28 93.00 5.61 0.221 E G L
LC 047E 02 12.70 0.500 13.80 78.80 6.17 0.243 E G L
LC 047E 03 14.30 0.563 11.94 68.20 6.76 0.266 F H M
LC 047E 04 15.88 0.625 10.54 60.20 7.34 0.289 F H M
LC 047E 05 17.48 0.688 9.42 53.80 7.90 0.311 F H M
LC 047E 06 19.05 0.750 8.54 48.80 8.48 0.334 F H M
LC 047E 07 20.65 0.813 7.79 44.50 9.07 0.357 G J N
LC 047E 08 22.23 0.875 7.18 41.00 9.63 0.379 G J N
LC 047E 09 23.83 0.938 6.64 37.90 10.21 0.402 G J N
LC 047E 10 25.40 1.000 6.18 35.30 10.77 0.424 H K P
LC 047E 11 28.58 1.125 5.43 31.00 11.91 0.469 H K P
LC 047E 12 31.75 1.250 4.85 27.70 13.06 0.514 H K P
LC 047E 13 34.93 1.375 4.38 25.00 14.22 0.560 J L Q
LC 047E 14 38.10 1.500 3.97 22.70 15.37 0.605 J L Q
LC 047E 15 44.45 1.750 3.38 19.30 17.65 0.695 K M R
LC 047E 16 50.80 2.000 2.94 16.80 19.94 0.785 K M R
LC 047E 17 57.15 2.250 2.59 14.80 22.25 0.876 L N S
LC 047E 18 63.50 2.500 2.33 13.30 24.54 0.966 L N S
LC 047E 19 69.85 2.750 2.10 12.00 26.82 1.056 M P T
LC 047E 20 76.20 3.000 1.93 11.00 29.13 1.147 M P T
LC 047E 21 82.55 3.250 1.77 10.10 31.52 1.241 P R V
LC 047E 22 88.90 3.500 1.65 9.40 33.68 1.326 P R V
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 73
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
74 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 055E 20 9.14 0.360 9.53 0.375 1.40 0.055 6.07 0.239 136.78 30.75 82.55 3.250 3.24 18.50 40.51 1.595 P R V
LC 055E 21 88.90 3.500 2.99 17.10 43.59 1.716 P R V
LC 059E 01 1.50 0.059 5.87 0.231 155.90 35.05 11.13 0.438 40.64 232.10 7.52 0.296 G J N
LC 059E 02 12.70 0.500 34.06 194.50 8.36 0.329 G J N
LC 059E 03 14.30 0.563 29.29 167.30 9.22 0.363 G J N
LC 059E 04 15.88 0.625 25.65 146.50 10.08 0.397 G J N
LC 059E 05 17.48 0.688 22.85 130.50 10.95 0.431 H K P
LC 059E 06 19.05 0.750 20.57 117.50 11.81 0.465 H K P
LC 059E 07 20.65 0.813 18.84 107.60 12.67 0.499 H K P
LC 059E 08 22.23 0.875 17.19 98.20 13.54 0.533 H K P
LC 059E 09 25.40 1.000 14.74 84.20 15.27 0.601 J L Q
LC 059E 10 28.58 1.125 12.92 73.80 16.99 0.669 J L Q
LC 059E 11 31.75 1.250 11.49 65.60 18.72 0.737 J L Q
LC 059E 12 34.93 1.375 10.35 59.10 20.45 0.805 K M R
LC 059E 13 38.10 1.500 9.42 53.80 22.17 0.873 K M R
LC 059E 14 44.45 1.750 7.97 45.50 25.63 1.009 L N S
LC 059E 15 50.80 2.000 6.92 39.50 29.08 1.145 L N S
LC 059E 16 57.15 2.250 6.11 34.90 32.54 1.281 M P T
LC 059E 17 63.50 2.500 5.46 31.20 35.99 1.417 M P T
LC 059E 18 69.85 2.750 4.94 28.20 39.45 1.553 N Q U
LC 059E 19 76.20 3.000 4.52 25.80 42.90 1.689 N Q U
LC 059E 20 82.55 3.250 4.15 23.70 46.51 1.831 P R V
LC 059E 21 88.90 3.500 3.82 21.80 50.27 1.979 P R V
LCM125EB 01† 9.25 0.364 9.90 0.390 1.25 0.049 6.10 0.240 114.47 25.74 15.00 0.591 14.32 81.76 6.88 0.271 G J SPECIAL
LCM125EB 02† 22.00 0.866 8.96 51.20 9.37 0.369 G J SPECIAL
LCM125EB 03† 33.00 1.299 5.80 33.13 13.13 0.517 G J SPECIAL
LCM125EB 04† 47.00 1.850 3.94 22.53 18.14 0.714 G J SPECIAL
LCM125EB 05† 69.00 2.717 2.67 15.22 25.63 1.009 G J SPECIAL
LC 026EE 01 9.53 0.375 9.93 0.391 0.66 0.026 7.85 0.309 10.47 2.35 12.70 0.500 1.09 6.24 3.12 0.123 D F K
LC 026EE 02 14.30 0.563 0.96 5.47 3.37 0.133 D F K
LC 026EE 03 15.88 0.625 0.85 4.88 3.61 0.142 D F K
LC 026EE 04 17.48 0.688 0.77 4.39 3.86 0.152 D F K
LC 026EE 05 19.05 0.750 0.70 4.00 4.10 0.161 E G L
LC 026EE 06 20.65 0.813 0.64 3.67 4.35 0.171 E G L
LC 026EE 07 22.23 0.875 0.59 3.40 4.59 0.181 E G L
LC 026EE 08 23.83 0.938 0.55 3.15 4.84 0.190 E G L
LC 026EE 09 25.40 1.000 0.52 2.95 5.08 0.200 F H M
LC 026EE 10 28.58 1.125 0.46 2.60 5.57 0.219 F H M
LC 026EE 11 31.75 1.250 0.41 2.33 6.06 0.239 F H M
LC 026EE 12 38.10 1.500 0.34 1.93 7.04 0.277 G J N
LC 026EE 13 44.45 1.750 0.29 1.65 8.02 0.316 G J N
LC 026EE 14 50.80 2.000 0.25 1.43 9.00 0.355 H K P
LC 026EE 15 57.15 2.250 0.22 1.27 9.99 0.393 H K P
LC 032EE 01 0.81 0.032 7.59 0.299 16.94 3.81 9.53 0.375 2.89 16.48 3.65 0.144 D F K
LC 032EE 02 12.70 0.500 2.06 11.75 4.45 0.175 D F K
LC 032EE 03 14.30 0.563 1.80 10.27 4.85 0.191 D F K
LC 032EE 04 15.88 0.625 1.60 9.13 5.25 0.207 D F K
LC 032EE 05 17.48 0.688 1.44 8.21 5.65 0.222 E G L
LC 032EE 06 19.05 0.750 1.31 7.47 6.04 0.238 E G L
LC 032EE 07 20.65 0.813 1.20 6.84 6.44 0.254 E G L
LC 032EE 08 22.23 0.875 1.11 6.32 6.84 0.269 E G L
LC 032EE 09 23.83 0.938 1.03 5.86 7.24 0.285 F H M
LC 032EE 10 25.40 1.000 0.96 5.47 7.63 0.301 F H M
LC 032EE 11 28.58 1.125 0.85 4.83 8.43 0.332 F H M
LC 032EE 12 31.75 1.250 0.76 4.32 9.23 0.363 F H M
LC 032EE 13 34.93 1.375 0.68 3.91 10.02 0.395 G J N
LC 032EE 14 38.10 1.500 0.62 3.57 10.82 0.426 G J N
LC 032EE 15 44.45 1.750 0.53 3.04 12.41 0.489 G J N
LC 032EE 16 50.80 2.000 0.46 2.65 14.00 0.551 H K P
LC 032EE 17 57.15 2.250 0.41 2.34 15.59 0.614 H K P
LC 032EE 18 63.50 2.500 0.37 2.10 17.19 0.677 H K P
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 75
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
76 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 038F 01 10.67 0.420 11.13 0.438 0.96 0.038 8.53 0.336 36.23 8.00 12.70 0.500 4.03 23.00 4.37 0.172 C E J
LC 038F 02 15.88 0.625 3.15 18.00 5.08 0.200 C E J
LC 038F 03 19.05 0.750 2.45 14.00 5.82 0.229 D F K
LC 038F 04 22.23 0.875 2.10 12.00 6.55 0.258 D F K
LC 038F 05 25.40 1.000 1.93 11.00 7.26 0.286 E G L
LC 038F 06 31.75 1.250 1.49 8.50 8.71 0.343 E G L
LC 038F 07 38.10 1.500 1.23 7.00 9.68 0.381 F H M
LC 038F 08 44.45 1.750 1.05 6.00 11.13 0.438 F H M
LC 038F 09 50.80 2.000 0.91 5.20 12.60 0.496 G J N
LC 038F 10 57.15 2.250 0.81 4.60 13.97 0.550 G J N
LC 038F 11 63.50 2.500 0.74 4.20 15.09 0.594 H K P
LC 042F 01 1.07 0.042 8.20 0.323 48.93 11.00 12.70 0.500 5.95 34.00 4.83 0.190 E G L
LC 042F 02 15.88 0.625 4.73 27.00 5.59 0.220 E G L
LC 042F 03 19.05 0.750 3.85 22.00 6.43 0.253 F H M
LC 042F 04 22.23 0.875 3.24 18.50 7.24 0.285 F H M
LC 042F 05 25.40 1.000 2.80 16.00 8.03 0.316 G J N
LC 042F 06 31.75 1.250 2.28 13.00 9.37 0.369 G J N
LC 042F 07 38.10 1.500 1.84 10.50 11.23 0.442 H K P
LC 042F 08 44.45 1.750 1.58 9.00 12.67 0.499 H K P
LC 042F 09 50.80 2.000 1.31 7.50 14.73 0.580 J L Q
LC 042F 10 57.15 2.250 1.17 6.70 16.15 0.636 J L Q
LC 042F 11 63.50 2.500 1.05 6.00 17.75 0.699 K M R
LC 045F 01 1.14 0.045 8.05 0.317 57.82 13.00 12.70 0.500 7.77 44.40 5.56 0.219 E G L
LC 045F 02 15.88 0.625 5.95 34.00 6.48 0.255 E G L
LC 045F 03 19.05 0.750 4.83 27.60 7.39 0.291 F H M
LC 045F 04 22.23 0.875 4.06 23.20 8.31 0.327 F H M
LC 045F 05 25.40 1.000 3.50 20.00 9.22 0.363 G J N
LC 045F 06 31.75 1.250 2.75 15.70 11.05 0.435 G J N
LC 045F 07 38.10 1.500 2.26 12.90 12.88 0.507 H K P
LC 045F 08 44.45 1.750 1.93 11.00 14.66 0.577 H K P
LC 045F 09 50.80 2.000 1.68 9.60 16.43 0.647 J L Q
LC 045F 10 57.15 2.250 1.47 8.40 18.42 0.725 J L Q
LC 045F 11 63.50 2.500 1.33 7.60 20.09 0.791 K M R
LC 047F 01 1.19 0.047 7.98 0.314 68.94 15.50 12.70 0.500 9.46 54.00 5.54 0.218 F H M
LC 047F 02 15.88 0.625 7.18 41.00 6.60 0.260 F H M
LC 047F 03 19.05 0.750 5.95 34.00 7.19 0.283 G J N
LC 047F 04 22.23 0.875 4.90 28.00 8.38 0.330 G J N
LC 047F 05 25.40 1.000 4.38 25.00 9.58 0.377 J L Q
LC 047F 06 31.75 1.250 3.33 19.00 11.35 0.447 J L Q
LC 047F 07 38.10 1.500 2.71 15.50 13.18 0.519 K M R
LC 047F 08 44.45 1.750 2.36 13.50 14.71 0.579 L N S
LC 047F 09 50.80 2.000 2.01 11.50 17.35 0.683 M P T
LC 051F 01 1.30 0.051 7.77 0.306 83.18 18.70 12.70 0.500 12.62 72.10 6.48 0.255 F H M
LC 051F 02 15.88 0.625 9.61 54.90 7.62 0.300 F H M
LC 051F 03 19.05 0.750 7.76 44.30 8.76 0.345 G J N
LC 051F 04 22.23 0.875 6.50 37.10 9.91 0.390 G J N
LC 051F 05 25.40 1.000 5.60 32.00 11.02 0.434 J L Q
LC 051F 06 31.75 1.250 4.38 25.00 13.34 0.525 J L Q
LC 051F 07 38.10 1.500 3.59 20.50 15.62 0.615 K M R
LC 051F 08 44.45 1.750 3.05 17.40 17.91 0.705 L N S
LC 051F 09 50.80 2.000 2.64 15.10 20.19 0.795 M P T
LC 051F 10 57.15 2.250 2.35 13.40 22.38 0.881 N Q U
LC 051F 11 63.50 2.500 2.10 12.00 24.66 0.971 P R V
LC 055F 01 1.40 0.055 7.57 0.298 106.75 24.00 12.70 0.500 16.63 95.00 7.01 0.276 F H M
LC 055F 02 15.88 0.625 13.13 75.00 8.05 0.317 F H M
LC 055F 03 19.05 0.750 10.68 61.00 9.47 0.373 G J N
LC 055F 04 22.23 0.875 9.11 52.00 10.52 0.414 G J N
LC 055F 05 25.40 1.000 7.70 44.00 11.91 0.469 H K P
LC 055F 06 31.75 1.250 6.13 35.00 14.00 0.551 J L Q
LC 055F 07 38.10 1.500 4.90 28.00 16.79 0.661 K M R
LC 055F 08 44.45 1.750 4.20 24.00 19.43 0.765 L N S
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 77
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
78 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LCM130F 01 10.80 0.425 11.30 0.445 1.30 0.051 7.70 0.303 83.62 18.80 12.50 0.492 12.94 73.90 6.07 0.239 F H SPECIAL
LCM130F 02 14.00 0.551 11.24 64.20 6.58 0.259 F H SPECIAL
LCM130F 03 15.50 0.610 9.93 56.70 7.11 0.280 F H SPECIAL
LCM130F 04 17.00 0.669 8.90 50.80 7.62 0.300 F H SPECIAL
LCM130F 05 19.00 0.748 7.81 44.60 8.33 0.328 G J SPECIAL
LCM130F 06 21.00 0.827 6.97 39.80 9.02 0.355 G J SPECIAL
LCM130F 07 23.00 0.906 6.29 35.90 9.73 0.383 G J SPECIAL
LCM130F 08 25.00 0.984 5.73 32.70 10.44 0.411 H K SPECIAL
LCM130F 09 27.50 1.083 5.15 29.40 11.30 0.445 H K SPECIAL
LCM130F 10 30.00 1.181 4.68 26.70 12.17 0.479 J L SPECIAL
LCM130F 11 35.00 1.378 3.96 22.60 13.92 0.548 J L SPECIAL
LCM130F 12 40.00 1.575 3.43 19.60 15.67 0.617 K M SPECIAL
LCM130F 13 45.00 1.772 3.03 17.30 17.42 0.686 L N SPECIAL
LCM130F 14 50.00 1.969 2.70 15.40 19.15 0.754 M P SPECIAL
LCM130F 15 55.00 2.165 2.45 14.00 20.90 0.823 N Q SPECIAL
LCM130F 16 60.00 2.362 2.24 12.80 22.66 0.892 P R SPECIAL
LCM100FC 01† 11.00 0.433 11.80 0.465 1.00 0.039 8.40 0.331 34.68 7.80 17.50 0.689 2.95 16.87 5.51 0.217 G J SPECIAL
LCM100FC 02† 26.00 1.024 1.88 10.74 7.49 0.295 G J SPECIAL
LCM100FC 03† 39.00 1.535 1.22 6.95 10.49 0.413 H K SPECIAL
LCM100FC 04† 56.00 2.205 0.83 4.72 14.50 0.571 H K SPECIAL
LCM100FC 05† 81.50 3.209 0.56 3.19 20.50 0.807 J L SPECIAL
LC 032FF 01 11.10 0.437 11.91 0.469 0.81 0.032 9.12 0.359 17.16 3.86 12.70 0.500 1.87 10.68 3.53 0.139 C E J
LC 032FF 02 15.88 0.625 1.45 8.30 4.06 0.160 C E J
LC 032FF 03 19.05 0.750 1.19 6.79 4.59 0.181 D F K
LC 032FF 04 22.23 0.875 1.01 5.74 5.12 0.202 D F K
LC 032FF 05 25.40 1.000 0.87 4.98 5.66 0.223 E G L
LC 032FF 06 31.75 1.250 0.69 3.93 6.72 0.265 E G L
LC 032FF 07 38.10 1.500 0.57 3.24 7.79 0.307 F H M
LC 032FF 08 44.45 1.750 0.48 2.76 8.85 0.348 F H M
LC 032FF 09 50.80 2.000 0.42 2.41 9.91 0.390 G J N
LC 032FF 10 53.98 2.125 0.40 2.26 10.44 0.411 G J N
LC 041FF 01 1.04 0.041 8.71 0.343 34.56 7.77 12.70 0.500 4.49 25.64 5.00 0.197 E G L
LC 041FF 02 15.88 0.625 3.46 19.74 5.85 0.231 E G L
LC 041FF 03 19.05 0.750 2.81 16.04 6.71 0.264 F H M
LC 041FF 04 22.23 0.875 2.37 13.51 7.56 0.298 F H M
LC 041FF 05 25.40 1.000 2.04 11.67 8.42 0.331 G J N
LC 041FF 06 27.00 1.063 1.91 10.90 8.86 0.349 G J N
LC 041FF 07 31.75 1.250 1.60 9.15 10.14 0.399 H K P
LC 041FF 08 38.10 1.500 1.32 7.54 11.85 0.467 H K P
LC 041FF 09 44.45 1.750 1.12 6.41 13.56 0.534 J L Q
LC 041FF 10 50.80 2.000 0.98 5.58 15.28 0.601 J L Q
LC 054FF 01 1.37 0.054 8.08 0.318 73.53 16.53 12.70 0.500 13.13 75.00 7.10 0.280 F H M
LC 054FF 02 15.88 0.625 9.96 56.87 8.46 0.333 F H M
LC 054FF 03 19.05 0.750 8.02 45.80 9.83 0.387 G J N
LC 054FF 04 22.23 0.875 6.71 38.33 11.19 0.441 G J N
LC 054FF 05 25.40 1.000 5.77 32.96 12.56 0.494 H K P
LC 054FF 06 31.75 1.250 4.51 25.75 15.28 0.602 J L Q
LC 054FF 07 38.10 1.500 3.70 21.12 18.01 0.709 K M R
LC 054FF 08 44.45 1.750 3.14 17.91 20.74 0.816 L N S
LC 054FF 09 50.80 2.000 2.72 15.54 23.46 0.924 M P T
LC 054FF 10 57.15 2.250 2.40 13.73 26.19 1.031 N Q U
LC 054FF 11 63.50 2.500 2.15 12.29 28.92 1.139 P R V
LCM125FF 01† 11.25 0.443 11.90 0.469 1.25 0.049 8.20 0.323 93.19 20.95 20.00 0.787 7.21 41.19 6.88 0.271 G J SPECIAL
LCM125FF 02† 29.50 1.161 4.59 26.21 9.37 0.369 G J SPECIAL
LCM125FF 03† 44.50 1.752 2.97 16.96 13.13 0.517 K M SPECIAL
LCM125FF 04† 64.00 2.520 2.02 11.53 18.14 0.714 L N SPECIAL
LCM125FF 05† 93.50 3.681 1.36 7.79 25.63 1.009 L N SPECIAL
LC 039FG 01 11.56 0.455 11.91 0.469 0.99 0.039 9.25 0.364 31.14 7.00 12.70 0.500 3.50 20.00 4.37 0.172 E G L
LC 039FG 02 15.88 0.625 2.75 15.70 5.05 0.199 E G L
LC 039FG 03 19.05 0.750 2.21 12.60 5.74 0.226 F H M
LC 039FG 04 22.23 0.875 1.89 10.80 6.45 0.254 F H M
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 79
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
80 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 036G 10 12.19 0.480 12.70 0.500 0.91 0.036 9.96 0.392 25.35 5.70 57.15 2.250 0.54 3.10 10.67 0.420 M P T
LC 036G 11 63.50 2.500 0.49 2.80 11.68 0.460 N Q U
LC 036G 12 69.85 2.750 0.44 2.50 12.67 0.499 P R V
LC 036G 13 76.20 3.000 0.40 2.30 13.69 0.539 Q S W
LC 038G 01 0.97 0.038 9.88 0.389 32.47 7.30 12.70 0.500 3.50 20.00 3.66 0.144 E G L
LC 038G 02 15.88 0.625 2.63 15.00 4.37 0.172 F H M
LC 038G 03 19.05 0.750 2.19 12.50 4.85 0.191 F H M
LC 038G 04 22.23 0.875 1.84 10.50 5.33 0.210 G J N
LC 038G 05 25.40 1.000 1.58 9.00 5.82 0.229 G J N
LC 038G 06 31.75 1.250 1.31 7.50 6.78 0.267 H K P
LC 038G 07 38.10 1.500 1.05 6.00 8.00 0.315 J L Q
LC 038G 08 41.28 1.625 0.96 5.50 8.43 0.332 K M R
LC 038G 09 44.45 1.750 0.86 4.90 9.17 0.361 L N S
LC 038G 10 50.80 2.000 0.75 4.30 10.34 0.407 M P T
LC 038G 11 57.15 2.250 0.65 3.70 11.68 0.460 N Q U
LC 038G 12 63.50 2.500 0.58 3.30 12.78 0.503 P R V
LC 038G 13 69.85 2.750 0.53 3.00 13.87 0.546 Q S W
LC 038G 14 76.20 3.000 0.47 2.70 14.96 0.589 R T X
LC 042G 01 1.07 0.042 9.68 0.381 42.26 9.50 12.70 0.500 4.90 28.00 4.29 0.169 E G L
LC 042G 02 15.88 0.625 3.85 22.00 5.11 0.201 F H M
LC 042G 03 19.05 0.750 3.15 18.00 5.64 0.222 F H M
LC 042G 04 22.23 0.875 2.63 15.00 6.30 0.248 G J N
LC 042G 05 25.40 1.000 2.28 13.00 6.96 0.274 G J N
LC 042G 06 31.75 1.250 1.75 10.00 8.31 0.327 H K P
LC 042G 07 38.10 1.500 1.49 8.50 9.63 0.379 J L Q
LC 042G 08 41.28 1.625 1.35 7.70 10.16 0.400 K M R
LC 042G 09 44.45 1.750 1.21 6.90 11.13 0.438 L N S
LC 042G 10 50.80 2.000 1.05 6.00 12.45 0.490 M P T
LC 042G 11 57.15 2.250 0.96 5.50 12.80 0.504 N Q U
LC 042G 12 63.50 2.500 0.88 5.00 14.27 0.562 P R V
LC 042G 13 69.85 2.750 0.79 4.50 15.49 0.610 Q S W
LC 042G 14 76.20 3.000 0.72 4.10 16.74 0.659 R T X
LC 045G 01 1.14 0.045 9.55 0.376 51.15 11.50 12.70 0.500 6.13 35.00 4.88 0.192 F H M
LC 045G 02 15.88 0.625 4.90 28.00 5.46 0.215 F H M
LC 045G 03 19.05 0.750 3.85 22.00 6.30 0.248 G J N
LC 045G 04 22.23 0.875 3.33 19.00 6.88 0.271 G J N
LC 045G 05 25.40 1.000 2.98 17.00 7.44 0.293 H K P
LC 045G 06 31.75 1.250 2.28 13.00 9.17 0.361 J L Q
LC 045G 07 38.10 1.500 1.93 11.00 10.26 0.404 K M R
LC 045G 08 41.28 1.625 1.72 9.80 11.33 0.446 K M R
LC 045G 09 44.45 1.750 1.58 9.00 12.24 0.482 L N S
LC 045G 10 50.80 2.000 1.35 7.70 13.74 0.541 M P T
LC 045G 11 57.15 2.250 1.17 6.70 15.49 0.610 N Q U
LC 045G 12 63.50 2.500 1.09 6.20 16.92 0.666 P R V
LC 045G 13 69.85 2.750 0.98 5.60 17.42 0.686 Q S W
LC 045G 14 76.20 3.000 0.89 5.10 18.85 0.742 R T X
LC 051G 01 1.30 0.051 9.27 0.365 71.17 16.00 12.70 0.500 9.98 57.00 5.56 0.219 F H M
LC 051G 02 15.88 0.625 7.53 43.00 6.48 0.255 F H M
LC 051G 03 19.05 0.750 6.48 37.00 7.39 0.291 G J N
LC 051G 04 22.23 0.875 5.17 29.50 8.15 0.321 G J N
LC 051G 05 25.40 1.000 4.38 25.00 9.40 0.370 H K P
LC 051G 06 31.75 1.250 3.41 19.50 11.15 0.439 J L Q
LC 051G 07 38.10 1.500 2.80 16.00 12.95 0.510 K M R
LC 051G 08 41.28 1.625 2.59 14.80 13.97 0.550 K M R
LC 051G 09 44.45 1.750 2.42 13.80 14.88 0.586 L N S
LC 051G 10 50.80 2.000 2.10 12.00 16.84 0.663 M P T
LC 051G 11 57.15 2.250 1.84 10.50 18.80 0.740 N Q U
LC 051G 12 63.50 2.500 1.66 9.50 20.73 0.816 P R V
LC 051G 13 69.85 2.750 1.45 8.30 22.86 0.900 Q S W
LC 051G 14 76.20 3.000 1.33 7.60 24.77 0.975 R T X
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 81
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
82 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 072G 08 12.19 0.480 12.70 0.500 1.83 0.072 8.23 0.324 198.64 44.66 44.45 1.750 9.70 55.40 23.93 0.942 Q S W
LC 072G 09 50.80 2.000 8.40 48.00 27.08 1.066 R T X
LC 072G 10 57.15 2.250 7.41 42.30 30.23 1.190 S U Y
LC 072G 11 63.50 2.500 6.62 37.80 33.35 1.313 T V Z
LC 072G 12 69.85 2.750 5.99 34.20 36.50 1.437 U W BA
LC 072G 13 76.20 3.000 5.46 31.20 39.62 1.560 V X BB
LC 072G 14 82.55 3.250 5.03 28.70 42.72 1.682 W Y BC
LC 072G 15 88.90 3.500 4.64 26.50 45.95 1.809 X Z BD
LC 075G 01 1.91 0.075 8.10 0.319 204.61 46.00 12.70 0.500 50.62 289.10 8.76 0.345 L N SPECIAL
LC 075G 02 15.88 0.625 37.75 215.60 10.41 0.410 M P SPECIAL
LC 075G 03 19.05 0.750 29.61 169.10 12.22 0.481 M P SPECIAL
LC 075G 04 22.23 0.875 24.34 139.00 14.02 0.552 N Q SPECIAL
LC 075G 05 25.40 1.000 20.91 119.40 15.67 0.617 N Q SPECIAL
LC 075G 06 31.75 1.250 16.16 92.30 19.10 0.752 P R SPECIAL
LC 075G 07 38.10 1.500 13.19 75.30 22.53 0.887 Q S SPECIAL
LC 075G 08 44.45 1.750 11.12 63.50 26.01 1.024 R T SPECIAL
LC 075G 09 50.80 2.000 9.63 55.00 29.41 1.158 S U SPECIAL
LC 075G 10 57.15 2.250 8.47 48.40 32.89 1.295 T V SPECIAL
LC 075G 11 63.50 2.500 7.58 43.30 36.30 1.429 U W SPECIAL
LC 075G 12 69.85 2.750 6.85 39.10 39.78 1.566 V X SPECIAL
LC 075G 13 76.20 3.000 6.25 35.70 43.18 1.700 W Y SPECIAL
LC 075G 14 82.55 3.250 5.74 32.80 46.66 1.837 X Z SPECIAL
LC 075G 15 88.90 3.500 5.32 30.40 50.04 1.970 Y BA SPECIAL
LC 080G 01 2.03 0.080 7.82 0.308 302.46 68.00 12.70 0.500 74.58 425.90 8.64 0.340 M P SPECIAL
LC 080G 02 15.88 0.625 54.53 311.40 10.34 0.407 N Q SPECIAL
LC 080G 03 19.05 0.750 42.97 245.40 12.01 0.473 N Q SPECIAL
LC 080G 04 22.23 0.875 35.46 202.50 13.69 0.539 P R SPECIAL
LC 080G 05 25.40 1.000 30.19 172.40 15.39 0.606 P R SPECIAL
LC 080G 06 31.75 1.250 23.25 132.80 18.75 0.738 Q S SPECIAL
LC 080G 07 38.10 1.500 18.93 108.10 22.12 0.871 R T SPECIAL
LC 080G 08 44.45 1.750 15.95 91.10 25.48 1.003 S U SPECIAL
LC 080G 09 50.80 2.000 13.78 78.70 28.85 1.136 T V SPECIAL
LC 080G 10 57.15 2.250 12.13 69.30 32.23 1.269 U W SPECIAL
LC 080G 11 63.50 2.500 10.84 61.90 35.59 1.401 V X SPECIAL
LC 080G 12 69.85 2.750 9.79 55.90 38.96 1.534 W Y SPECIAL
LC 080G 13 76.20 3.000 8.93 51.00 42.32 1.666 X Z SPECIAL
LC 041GG 01 12.70 0.500 13.49 0.531 1.04 0.041 10.31 0.406 24.72 5.56 12.70 0.500 3.12 17.83 4.78 0.188 E G L
LC 041GG 02 15.88 0.625 2.40 13.72 5.57 0.219 F H M
LC 041GG 03 19.05 0.750 1.95 11.15 6.36 0.250 F H M
LC 041GG 04 22.23 0.875 1.65 9.40 7.15 0.281 G J N
LC 041GG 05 25.40 1.000 1.42 8.12 7.94 0.313 G J N
LC 041GG 06 31.75 1.250 1.12 6.38 9.51 0.375 H K P
LC 041GG 07 38.10 1.500 0.92 5.25 11.09 0.437 J L Q
LC 041GG 08 44.45 1.750 0.78 4.47 12.67 0.499 L M R
LC 041GG 09 50.80 2.000 0.68 3.88 14.25 0.561 M N S
LC 041GG 10 57.15 2.250 0.60 3.44 15.82 0.623 N P T
LC 041GG 11 63.50 2.500 0.54 3.08 17.40 0.685 P Q U
LC 041GG 12 69.85 2.750 0.49 2.79 18.98 0.747 Q R V
LC 041GG 13 76.20 3.000 0.45 2.55 20.56 0.809 R S W
LC 062GG 01 1.59 0.062 9.22 0.363 78.22 17.58 12.70 0.500 16.59 94.76 7.99 0.314 G J N
LC 062GG 02 15.88 0.625 12.44 71.07 9.56 0.376 H K P
LC 062GG 03 19.05 0.750 9.96 56.86 11.13 0.438 H K P
LC 062GG 04 22.23 0.875 8.30 47.38 12.70 0.500 J L Q
LC 062GG 05 25.40 1.000 7.11 40.61 14.27 0.562 J L Q
LC 062GG 06 31.75 1.250 5.53 31.59 17.42 0.686 K M R
LC 062GG 07 38.10 1.500 4.53 25.84 20.56 0.810 L N S
LC 062GG 08 44.45 1.750 3.83 21.87 23.71 0.933 M P T
LC 062GG 09 50.80 2.000 3.32 18.95 26.85 1.057 M P T
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 83
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
84 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 046GH 10 13.72 0.540 14.27 0.562 1.17 0.046 10.82 0.426 44.48 10.00 57.15 2.250 1.03 5.90 13.54 0.533 N Q U
LC 046GH 11 63.50 2.500 0.93 5.30 14.81 0.583 P R V
LC 046GH 12 69.85 2.750 0.84 4.80 16.08 0.633 Q S W
LC 046GH 13 76.20 3.000 0.77 4.40 17.35 0.683 R T X
LC 054GH 01 1.37 0.054 10.46 0.412 71.17 16.00 12.70 0.500 10.03 57.30 5.66 0.223 F H M
LC 054GH 02 15.88 0.625 7.60 43.40 6.50 0.256 F H M
LC 054GH 03 19.05 0.750 6.13 35.00 7.37 0.290 G J N
LC 054GH 04 22.23 0.875 5.13 29.30 8.20 0.323 G J N
LC 054GH 05 25.40 1.000 4.41 25.20 9.04 0.356 H K P
LC 054GH 06 31.75 1.250 3.45 19.70 10.74 0.423 J L Q
LC 054GH 07 38.10 1.500 2.82 16.10 12.45 0.490 K M R
LC 054GH 08 44.45 1.750 2.40 13.70 14.15 0.557 L N S
LC 054GH 09 50.80 2.000 2.08 11.90 15.85 0.624 M P T
LC 054GH 10 57.15 2.250 1.84 10.50 17.55 0.691 N Q U
LC 054GH 11 63.50 2.500 1.65 9.40 19.23 0.757 P R V
LC 054GH 12 69.85 2.750 1.49 8.50 20.93 0.824 Q S W
LC 054GH 13 76.20 3.000 1.37 7.80 22.63 0.891 R T X
LC 058GH 01 1.47 0.058 10.26 0.404 88.96 20.00 12.70 0.500 13.27 75.80 6.15 0.242 F H M
LC 058GH 02 15.88 0.625 10.02 57.20 7.11 0.280 F H M
LC 058GH 03 19.05 0.750 8.04 45.90 8.08 0.318 G J N
LC 058GH 04 22.23 0.875 6.72 38.40 9.02 0.355 G J N
LC 058GH 05 25.40 1.000 5.78 33.00 9.98 0.393 H K P
LC 058GH 06 31.75 1.250 4.50 25.70 11.91 0.469 J L Q
LC 058GH 07 38.10 1.500 3.68 21.00 13.82 0.544 K M R
LC 058GH 08 44.45 1.750 3.12 17.80 15.75 0.620 L N S
LC 058GH 09 50.80 2.000 2.71 15.50 17.65 0.695 M P T
LC 058GH 10 57.15 2.250 2.40 13.70 19.58 0.771 N Q U
LC 058GH 11 63.50 2.500 2.14 12.20 21.49 0.846 P R V
LC 058GH 12 69.85 2.750 1.93 11.00 23.42 0.922 Q S W
LC 058GH 13 76.20 3.000 1.77 10.10 25.32 0.997 R T X
LC 063GH 01 1.60 0.063 10.01 0.394 111.20 25.00 12.70 0.500 18.46 105.40 6.76 0.266 G J N
LC 063GH 02 15.88 0.625 13.83 79.00 7.87 0.310 G J N
LC 063GH 03 19.05 0.750 11.07 63.20 8.97 0.353 H K P
LC 063GH 04 22.23 0.875 9.21 52.60 10.08 0.397 H K P
LC 063GH 05 25.40 1.000 7.90 45.10 11.18 0.440 J L Q
LC 063GH 06 31.75 1.250 6.15 35.10 13.39 0.527 K M R
LC 063GH 07 38.10 1.500 5.03 28.70 15.60 0.614 L N S
LC 063GH 08 44.45 1.750 4.25 24.30 17.81 0.701 M P T
LC 063GH 09 50.80 2.000 3.68 21.00 20.02 0.788 N Q U
LC 063GH 10 57.15 2.250 3.26 18.60 22.23 0.875 P R V
LC 063GH 11 63.50 2.500 2.91 16.60 24.43 0.962 Q S W
LC 063GH 12 69.85 2.750 2.63 15.00 26.64 1.049 R T X
LC 063GH 13 76.20 3.000 2.40 13.70 28.85 1.136 S U Y
LC 067GH 01 1.70 0.067 9.83 0.387 133.44 30.00 12.70 0.500 23.99 137.00 7.21 0.284 H K P
LC 067GH 02 15.88 0.625 17.86 102.00 8.43 0.332 H K P
LC 067GH 03 19.05 0.750 14.22 81.20 9.65 0.380 J L Q
LC 067GH 04 22.23 0.875 11.82 67.50 10.87 0.428 J L Q
LC 067GH 05 25.40 1.000 10.10 57.70 12.09 0.476 K M R
LC 067GH 06 31.75 1.250 7.84 44.80 14.50 0.571 L N S
LC 067GH 07 38.10 1.500 6.41 36.60 16.94 0.667 M P T
LC 067GH 08 44.45 1.750 5.43 31.00 19.38 0.763 N Q U
LC 067GH 09 50.80 2.000 4.69 26.80 21.79 0.858 P R V
LC 067GH 10 57.15 2.250 4.13 23.60 24.23 0.954 Q S W
LC 067GH 11 63.50 2.500 3.69 21.10 26.67 1.050 R T X
LC 067GH 12 69.85 2.750 3.34 19.10 29.11 1.146 S U Y
LC 067GH 13 76.20 3.000 3.06 17.50 31.52 1.241 T V Z
LCM125GJ 01† 13.75 0.541 14.60 0.575 1.25 0.049 10.60 0.417 74.33 16.71 27.00 1.063 3.69 21.09 6.88 0.271 H K SPECIAL
LCM125GJ 02† 41.50 1.634 2.35 13.42 9.37 0.369 K M SPECIAL
LCM125GJ 03† 62.50 2.461 1.52 8.69 13.13 0.517 P R SPECIAL
LCM125GJ 04† 90.50 3.563 1.03 5.91 18.14 0.714 S U SPECIAL
LCM125GJ 05† 130.00 5.118 0.70 3.99 25.63 1.009 W Y SPECIAL
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 85
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
86 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LCM160H 06 15.00 0.591 16.00 0.630 1.60 0.063 11.00 0.433 101.99 22.93 35.00 1.378 4.62 26.40 12.95 0.510 K M SPECIAL
LCM160H 07 40.00 1.575 3.99 22.80 14.48 0.570 K M SPECIAL
LCM160H 08 45.00 1.772 3.52 20.10 16.00 0.630 L N SPECIAL
LCM160H 09 50.00 1.969 3.13 17.90 17.55 0.691 L N SPECIAL
LCM160H 10 55.00 2.165 2.84 16.20 19.08 0.751 M P SPECIAL
LCM160H 11 60.00 2.362 2.59 14.80 20.60 0.811 N Q SPECIAL
LCM160H 12 65.00 2.559 2.38 13.60 22.15 0.872 P R SPECIAL
LCM160H 13 70.00 2.756 2.21 12.60 23.67 0.932 Q S SPECIAL
LCM160H 14 80.00 3.150 1.91 10.90 26.75 1.053 R T SPECIAL
LCM160H 15 90.00 3.543 1.69 9.67 29.79 1.173 S U SPECIAL
LC 045H 0 15.24 0.600 15.88 0.625 1.14 0.045 12.40 0.488 32.47 7.30 12.70 0.500 3.80 21.70 4.32 0.170 F H M
LC 045H 01 15.88 0.625 3.15 18.00 4.60 0.181 F H M
LC 045H 02 19.05 0.750 2.63 15.00 5.18 0.204 G J N
LC 045H 03 22.23 0.875 2.10 12.00 5.74 0.226 G J N
LC 045H 04 25.40 1.000 1.84 10.50 6.32 0.249 H K P
LC 045H 05 31.75 1.250 1.40 8.00 7.47 0.294 J L Q
LC 045H 06 38.10 1.500 1.14 6.50 8.89 0.350 K M R
LC 045H 07 44.45 1.750 0.96 5.50 9.83 0.387 L N S
LC 045H 08 50.80 2.000 0.84 4.80 11.25 0.443 M P T
LC 045H 09 57.15 2.250 0.74 4.20 12.34 0.486 N Q U
LC 045H 10 63.50 2.500 0.67 3.80 13.51 0.532 P R V
LC 045H 11 69.85 2.750 0.60 3.40 14.63 0.576 Q S W
LC 045H 12 76.20 3.000 0.54 3.10 15.80 0.622 R T X
LC 045H 13 82.55 3.250 0.51 2.90 16.94 0.667 S U Y
LC 045H 14 88.90 3.500 0.47 2.70 18.06 0.711 T V Z
LC 049H 01 1.24 0.049 12.17 0.479 53.38 12.00 15.88 0.625 4.90 28.00 5.08 0.200 F H M
LC 049H 02 19.05 0.750 4.03 23.00 5.61 0.221 G J N
LC 049H 03 22.23 0.875 3.33 19.00 6.22 0.245 G J N
LC 049H 04 25.40 1.000 2.80 16.00 6.86 0.270 H K P
LC 049H 05 31.75 1.250 2.28 13.00 7.72 0.304 J L Q
LC 049H 06 38.10 1.500 1.75 10.00 9.35 0.368 K M R
LC 049H 07 44.45 1.750 1.49 8.50 10.59 0.417 L N S
LC 049H 08 50.80 2.000 1.31 7.50 11.46 0.451 M R T
LC 049H 09 57.15 2.250 1.14 6.50 12.70 0.500 N Q U
LC 049H 10 63.50 2.500 1.02 5.80 13.97 0.550 P R V
LC 049H 11 69.85 2.750 0.89 5.10 15.39 0.606 Q S W
LC 049H 12 76.20 3.000 0.81 4.60 16.61 0.654 R T X
LC 055H 01 1.40 0.055 11.89 0.468 72.50 16.30 15.88 0.625 7.00 40.00 5.79 0.228 F H M
LC 055H 02 19.05 0.750 5.78 33.00 6.32 0.249 G J N
LC 055H 03 22.23 0.875 4.73 27.00 7.37 0.290 G J N
LC 055H 04 25.40 1.000 4.20 24.00 8.05 0.317 H K P
LC 055H 05 31.75 1.250 3.33 19.00 9.12 0.359 J L Q
LC 055H 06 38.10 1.500 2.63 15.00 10.87 0.428 K M R
LC 055H 07 44.45 1.750 2.24 12.80 12.14 0.478 L N S
LC 055H 08 50.80 2.000 1.93 11.00 13.77 0.542 M P T
LC 055H 09 57.15 2.250 1.72 9.80 15.21 0.599 N Q U
LC 055H 10 63.50 2.500 1.56 8.90 16.69 0.657 P R V
LC 055H 11 69.85 2.750 1.35 7.70 18.42 0.725 Q S W
LC 055H 12 76.20 3.000 1.24 7.10 19.81 0.780 R T X
LC 059H 01 1.50 0.059 11.71 0.461 86.74 19.50 15.88 0.625 9.28 53.00 6.55 0.258 F H M
LC 059H 02 19.05 0.750 7.35 42.00 7.32 0.288 G J N
LC 059H 03 22.23 0.875 6.13 35.00 8.05 0.317 G J N
LC 059H 04 25.40 1.000 5.25 30.00 8.94 0.352 H K P
LC 059H 05 31.75 1.250 4.20 24.00 10.80 0.425 J L Q
LC 059H 06 38.10 1.500 3.33 19.00 12.24 0.482 K M R
LC 059H 07 44.45 1.750 2.80 16.00 14.12 0.556 L N S
LC 059H 08 50.80 2.000 2.45 14.00 15.62 0.615 M P T
LC 059H 09 57.15 2.250 2.19 12.50 17.91 0.705 N Q U
LC 059H 10 63.50 2.500 1.98 11.30 19.74 0.777 P R V
LC 059H 11 69.85 2.750 1.63 9.30 21.77 0.857 Q S W
LC 059H 12 76.20 3.000 1.49 8.50 23.47 0.924 R T X
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 87
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
88 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 085H 08 15.24 0.600 15.88 0.625 2.16 0.085 10.41 0.410 290.68 65.35 50.80 2.000 10.91 62.30 24.89 0.980 R T SPECIAL
LC 085H 09 57.15 2.250 9.60 54.80 27.69 1.090 S U SPECIAL
LC 085H 10 63.50 2.500 8.58 49.00 30.48 1.200 T V SPECIAL
LC 085H 11 69.85 2.750 7.74 44.20 33.27 1.310 U W SPECIAL
LC 085H 12 76.20 3.000 7.06 40.30 36.07 1.420 V X SPECIAL
LC 085H 13 82.55 3.250 6.48 37.00 38.91 1.532 X Z SPECIAL
LC 085H 14 88.90 3.500 6.00 34.25 41.66 1.640 Y BA SPECIAL
LC 085H 15 95.25 3.750 5.59 31.90 43.10 1.697 Y BA SPECIAL
LC 085H 16 101.60 4.000 5.22 29.80 45.85 1.805 Z BB SPECIAL
LC 092H 01 2.34 0.092 10.06 0.396 397.43 89.35 15.88 0.625 65.42 373.60 10.08 0.397 N Q SPECIAL
LC 092H 02 19.05 0.750 50.95 291.00 11.58 0.456 P R SPECIAL
LC 092H 03 22.23 0.875 41.74 238.40 13.08 0.515 P R SPECIAL
LC 092H 04 25.40 1.000 35.35 201.90 14.58 0.574 Q S SPECIAL
LC 092H 05 31.75 1.250 27.05 154.50 17.58 0.692 R T SPECIAL
LC 092H 06 38.10 1.500 21.92 125.20 20.57 0.810 S U SPECIAL
LC 092H 07 44.45 1.750 18.42 105.20 23.57 0.928 T V SPECIAL
LC 092H 08 50.80 2.000 15.88 90.70 26.57 1.046 U W SPECIAL
LC 092H 09 57.15 2.250 13.97 79.80 29.57 1.164 V X SPECIAL
LC 092H 10 63.50 2.500 12.45 71.10 32.54 1.281 W Y SPECIAL
LC 092H 11 69.85 2.750 11.24 64.20 35.53 1.399 X Z SPECIAL
LC 092H 12 76.20 3.000 10.24 58.50 38.53 1.517 Y BA SPECIAL
LC 092H 13 82.55 3.250 9.42 53.80 41.48 1.633 Z BB SPECIAL
LC 092H 14 88.90 3.500 8.70 49.70 44.50 1.752 BA BC SPECIAL
LC 092H 15 95.25 3.750 8.11 46.30 47.42 1.867 BB BD SPECIAL
LC 092H 16 101.60 4.000 7.56 43.20 50.50 1.988 BC BE SPECIAL
LC 098H 01 2.49 0.098 9.78 0.385 462.15 103.90 19.05 0.750 67.90 387.80 12.37 0.487 P R SPECIAL
LC 098H 02 22.23 0.875 55.00 314.10 14.05 0.553 P R SPECIAL
LC 098H 03 25.40 1.000 46.79 267.20 15.62 0.615 Q S SPECIAL
LC 098H 04 31.75 1.250 35.70 203.90 18.87 0.743 R T SPECIAL
LC 098H 05 38.10 1.500 28.86 164.80 22.15 0.872 S U SPECIAL
LC 098H 06 44.45 1.750 24.22 138.30 25.40 1.000 T V SPECIAL
LC 098H 07 50.80 2.000 20.85 119.10 28.68 1.129 U W SPECIAL
LC 098H 08 57.15 2.250 18.32 104.60 31.93 1.257 V X SPECIAL
LC 098H 09 63.50 2.500 16.34 93.30 35.18 1.385 W Y SPECIAL
LC 098H 10 69.85 2.750 14.73 84.10 38.48 1.515 X Z SPECIAL
LC 098H 11 76.20 3.000 13.41 76.60 41.73 1.643 Y BA SPECIAL
LC 098H 12 82.55 3.250 12.33 70.40 44.96 1.770 Z BB SPECIAL
LC 098H 13 88.90 3.500 11.38 65.00 48.26 1.900 BA BC SPECIAL
LC 098H 14 95.25 3.750 10.59 60.50 51.49 2.027 BB BD SPECIAL
LC 098H 15 101.60 4.000 9.89 56.50 54.76 2.156 BC BE SPECIAL
LC 120HH 01 15.88 0.625 16.66 0.656 3.05 0.120 9.32 0.367 552.33 124.18 22.23 0.875 114.42 653.47 17.40 0.685 Q S SPECIAL
LC 120HH 02 25.40 1.000 95.60 545.99 19.59 0.771 R T SPECIAL
LC 120HH 03 31.75 1.250 71.94 410.84 23.96 0.944 S U SPECIAL
LC 120HH 04 38.10 1.500 57.67 329.33 28.34 1.116 T V SPECIAL
LC 120HH 05 44.45 1.750 48.12 274.80 32.72 1.288 U W SPECIAL
LC 120HH 06 50.80 2.000 41.28 235.77 37.10 1.461 V X SPECIAL
LC 120HH 07 57.15 2.250 36.15 206.44 41.48 1.633 W Y SPECIAL
LC 120HH 08 63.50 2.500 32.15 183.61 45.85 1.805 X Z SPECIAL
LC 120HH 09 69.85 2.750 28.95 165.32 50.23 1.978 Y BA SPECIAL
LC 120HH 10 76.20 3.000 26.33 150.35 54.61 2.150 Z BB SPECIAL
LC 120HH 11 82.55 3.250 24.14 137.86 58.99 2.322 BA BC SPECIAL
LC 120HH 12 88.90 3.500 22.29 127.29 63.36 2.495 BB BD SPECIAL
LC 120HH 13 101.60 4.000 19.32 110.36 72.12 2.839 BC BE SPECIAL
LC 049HJ 01 16.76 0.660 17.45 0.687 1.24 0.049 13.67 0.538 44.48 10.00 15.88 0.625 4.08 23.30 4.62 0.182 J L Q
LC 049HJ 02 19.05 0.750 3.19 18.20 5.33 0.210 J L Q
LC 049HJ 03 22.23 0.875 2.68 15.30 5.84 0.230 K M R
LC 049HJ 04 25.40 1.000 2.31 13.20 6.32 0.249 K M R
LC 049HJ 05 31.75 1.250 1.80 10.30 7.32 0.288 K M R
LC 049HJ 06 38.10 1.500 1.49 8.50 8.33 0.328 L N S
LC 049HJ 07 44.45 1.750 1.26 7.20 9.32 0.367 L N S
LC 049HJ 08 50.80 2.000 1.10 6.30 10.31 0.406 M P T
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 89
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
90 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 105HK 05 17.48 0.688 18.26 0.719 2.67 0.105 11.66 0.459 393.86 88.55 44.45 1.750 21.11 120.57 25.58 1.007 U W SPECIAL
LC 105HK 06 50.80 2.000 18.16 103.73 28.84 1.136 V X SPECIAL
LC 105HK 07 57.15 2.250 15.94 91.02 32.11 1.264 W Y SPECIAL
LC 105HK 08 63.50 2.500 14.20 81.08 35.37 1.392 X Z SPECIAL
LC 105HK 09 69.85 2.750 12.80 73.10 38.63 1.521 Y BA SPECIAL
LC 105HK 10 76.20 3.000 11.65 66.55 41.89 1.649 Z BB SPECIAL
LC 105HK 11 82.55 3.250 10.69 61.08 45.15 1.778 BA BC SPECIAL
LC 105HK 12 88.90 3.500 9.88 56.44 48.41 1.906 BB BD SPECIAL
LC 105HK 13 101.60 4.000 8.58 48.99 54.94 2.163 BC BE SPECIAL
LC 150HK 01 3.76 0.150 9.40 0.370 981.00 220.55 22.23 0.875 291.60 1665.33 18.86 0.743 R T SPECIAL
LC 150HK 02 25.40 1.000 239.53 1367.95 21.25 0.837 S U SPECIAL
LC 150HK 03 27.00 1.063 219.75 1255.00 22.46 0.884 T V SPECIAL
LC 150HK 04 31.75 1.250 176.49 1007.96 26.04 1.025 U W SPECIAL
LC 150HK 05 38.10 1.500 139.72 797.97 30.83 1.214 V X SPECIAL
LC 150HK 06 44.45 1.750 115.63 660.39 35.62 1.402 W Y SPECIAL
LC 150HK 07 50.80 2.000 98.63 563.27 40.41 1.591 X Z SPECIAL
LC 150HK 08 57.15 2.250 85.98 491.06 45.19 1.779 Y BA SPECIAL
LC 150HK 09 63.50 2.500 76.21 435.26 49.98 1.968 Z BB SPECIAL
LC 150HK 10 76.20 3.000 62.10 354.65 59.56 2.345 BA BC SPECIAL
LC 150HK 11 82.55 3.250 56.84 324.60 64.35 2.533 BB BD SPECIAL
LC 150HK 12 88.90 3.500 52.40 299.24 69.13 2.722 BC BE SPECIAL
LCM160HM 01† 17.60 0.693 18.50 0.728 1.60 0.063 13.70 0.539 118.16 26.57 34.00 1.339 4.73 27.00 8.79 0.346 R T SPECIAL
LCM160HM 02† 51.50 2.028 2.96 16.91 11.99 0.472 V X SPECIAL
LCM160HM 03† 77.50 3.051 1.95 11.12 16.79 0.661 Z BB SPECIAL
LCM160HM 04† 110.00 4.331 1.32 7.56 23.19 0.913 BC BE SPECIAL
LCM160HM 05† 165.00 6.496 0.89 5.11 32.79 1.291 BD BH SPECIAL
LCM200HN 01† 18.00 0.709 18.60 0.732 2.00 0.079 13.40 0.528 220.35 49.54 30.00 1.181 11.54 65.91 11.00 0.433 S U SPECIAL
LCM200HN 02† 45.00 1.772 7.34 41.94 15.01 0.591 U W SPECIAL
LCM200HN 03† 68.00 2.677 4.75 27.14 21.01 0.827 Y BA SPECIAL
LCM200HN 04† 98.00 3.858 3.23 18.46 29.01 1.142 BC BE SPECIAL
LCM200HN 05† 145.00 5.709 2.18 12.47 41.00 1.614 BF BH SPECIAL
LC 055J 0 18.29 0.720 19.05 0.750 1.40 0.055 14.86 0.585 57.82 13.00 15.88 0.625 5.03 28.70 5.16 0.203 L N S
LC 055J 01 19.05 0.750 4.03 23.00 5.61 0.221 L N S
LC 055J 02 22.23 0.875 3.50 20.00 6.15 0.242 M P T
LC 055J 03 25.40 1.000 3.24 18.50 6.32 0.249 M P T
LC 055J 04 31.75 1.250 2.45 14.00 7.72 0.304 M P T
LC 055J 05 38.10 1.500 2.01 11.50 8.41 0.331 N Q U
LC 055J 06 44.45 1.750 1.58 9.00 10.16 0.400 N Q U
LC 055J 07 50.80 2.000 1.49 8.50 10.69 0.421 P R V
LC 055J 08 57.15 2.250 1.28 7.30 11.86 0.467 P R V
LC 055J 09 63.50 2.500 1.16 6.60 13.11 0.516 Q S W
LC 055J 10 69.85 2.750 1.05 6.00 13.92 0.548 Q S W
LC 055J 11 76.20 3.000 0.96 5.50 14.91 0.587 R T X
LC 059J 01 1.50 0.059 14.68 0.578 75.62 17.00 19.05 0.750 5.76 32.90 6.05 0.238 M P T
LC 059J 02 22.23 0.875 4.78 27.30 6.65 0.262 M P T
LC 059J 03 25.40 1.000 4.11 23.50 7.21 0.284 N Q U
LC 059J 04 31.75 1.250 3.20 18.30 8.41 0.331 N Q U
LC 059J 05 38.10 1.500 2.63 15.00 9.58 0.377 P R V
LC 059J 06 44.45 1.750 2.22 12.70 10.74 0.423 P R V
LC 059J 07 50.80 2.000 1.93 11.00 11.91 0.469 Q S W
LC 059J 08 57.15 2.250 1.70 9.70 13.11 0.516 Q S W
LC 059J 09 63.50 2.500 1.52 8.70 14.25 0.561 R T X
LC 063J 0 1.60 0.063 14.55 0.573 68.94 15.50 15.88 0.625 7.27 41.50 6.68 0.263 N Q U
LC 063J 01 19.05 0.750 5.78 33.00 7.21 0.284 N Q U
LC 063J 02 22.23 0.875 4.90 28.00 8.03 0.316 P R V
LC 063J 03 25.40 1.000 4.20 24.00 9.02 0.355 P R V
LC 063J 04 31.75 1.250 3.33 19.00 11.20 0.441 P R V
LC 063J 05 38.10 1.500 2.63 15.00 12.42 0.489 Q S W
LC 063J 06 44.45 1.750 2.28 13.00 13.61 0.536 Q S W
LC 063J 07 50.80 2.000 1.93 11.00 15.65 0.616 R T X
LC 063J 08 57.15 2.250 1.75 10.00 17.09 0.673 R T X
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 91
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
92 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 085J 09 18.29 0.720 19.05 0.750 2.16 0.085 13.44 0.529 242.42 54.50 69.85 2.750 5.46 31.20 26.24 1.033 V Y SPECIAL
LC 085J 10 76.20 3.000 4.97 28.40 28.37 1.117 W Z SPECIAL
LC 085J 11 88.90 3.500 4.24 24.20 32.59 1.283 X BA SPECIAL
LC 085J 12 101.60 4.000 3.68 21.00 36.80 1.449 Y BB SPECIAL
LC 095J 0 2.41 0.095 12.93 0.509 341.16 76.70 19.05 0.750 38.17 218.00 10.36 0.408 P Q SPECIAL
LC 095J 01 22.23 0.875 31.26 178.50 11.66 0.459 R V SPECIAL
LC 095J 02 25.40 1.000 26.42 150.90 12.88 0.507 S V SPECIAL
LC 095J 03 31.75 1.250 20.19 115.30 15.29 0.602 S V SPECIAL
LC 095J 04 38.10 1.500 16.35 93.40 17.73 0.698 T W SPECIAL
LC 095J 05 44.45 1.750 13.73 78.40 20.17 0.794 T W SPECIAL
LC 095J 06 50.80 2.000 11.84 67.60 22.61 0.890 U X SPECIAL
LC 095J 07 57.15 2.250 10.40 59.40 25.04 0.986 V Y SPECIAL
LC 095J 08 63.50 2.500 9.26 52.90 27.48 1.082 W Z SPECIAL
LC 095J 09 69.85 2.750 8.37 47.80 29.92 1.178 X BA SPECIAL
LC 095J 10 76.20 3.000 7.62 43.50 32.36 1.274 Y BB SPECIAL
LC 095J 11 88.90 3.500 6.48 37.00 37.24 1.466 Z BC SPECIAL
LC 095J 12 101.60 4.000 5.62 32.10 42.11 1.658 BA BD SPECIAL
LC 105J 0 2.67 0.105 12.45 0.490 446.13 100.30 19.05 0.750 59.13 337.70 11.28 0.444 U Y SPECIAL
LC 105J 01 22.23 0.875 48.08 274.60 13.34 0.525 U Y SPECIAL
LC 105J 02 25.40 1.000 40.47 231.10 14.81 0.583 U Y SPECIAL
LC 105J 03 31.75 1.250 30.75 175.60 17.75 0.699 V Z SPECIAL
LC 105J 04 38.10 1.500 24.78 141.50 20.70 0.815 V Z SPECIAL
LC 105J 05 44.45 1.750 20.75 118.50 23.65 0.931 W BA SPECIAL
LC 105J 06 50.80 2.000 17.86 102.00 26.59 1.047 W BA SPECIAL
LC 105J 07 57.15 2.250 15.67 89.50 29.54 1.163 X BB SPECIAL
LC 105J 08 63.50 2.500 13.97 79.80 32.49 1.279 Y BC SPECIAL
LC 105J 09 69.85 2.750 12.59 71.90 35.43 1.395 Z BD SPECIAL
LC 105J 10 76.20 3.000 11.47 65.50 38.38 1.511 BA BE SPECIAL
LC 105J 11 88.90 3.500 9.72 55.50 44.27 1.743 BB BF SPECIAL
LC 105J 12 101.60 4.000 8.44 48.20 50.17 1.975 BC BG SPECIAL
LC 112J 0 2.84 0.112 12.09 0.476 578.68 130.10 19.05 0.750 80.69 460.80 11.91 0.469 U Y SPECIAL
LC 112J 01 22.23 0.875 65.28 372.80 14.45 0.569 U Y SPECIAL
LC 112J 02 25.40 1.000 54.77 312.80 16.03 0.631 U Y SPECIAL
LC 112J 03 31.75 1.250 41.43 236.60 19.23 0.757 V Z SPECIAL
LC 112J 04 38.10 1.500 33.30 190.20 22.40 0.882 V Z SPECIAL
LC 112J 05 44.45 1.750 27.84 159.00 25.58 1.007 W BA SPECIAL
LC 112J 06 50.80 2.000 23.94 136.70 28.78 1.133 W BA SPECIAL
LC 112J 07 57.15 2.250 20.98 119.80 31.95 1.258 X BB SPECIAL
LC 112J 08 63.50 2.500 18.67 106.60 35.13 1.383 Y BC SPECIAL
LC 112J 09 69.85 2.750 16.83 96.10 38.33 1.509 Z BD SPECIAL
LC 112J 10 76.20 3.000 15.30 87.40 41.50 1.634 BA BE SPECIAL
LC 112J 11 88.90 3.500 12.97 74.10 47.88 1.885 BB BF SPECIAL
LC 112J 12 101.60 4.000 11.26 64.30 54.25 2.136 BC BG SPECIAL
LCM140J 01 18.30 0.720 19.00 0.748 1.40 0.055 14.70 0.579 57.82 13.00 15.50 0.610 5.46 31.20 4.90 0.193 L N SPECIAL
LCM140J 02 19.00 0.748 4.28 24.45 5.49 0.216 L N SPECIAL
LCM140J 03 22.00 0.866 3.61 20.60 5.99 0.236 M P SPECIAL
LCM140J 04 25.00 0.984 3.12 17.80 6.48 0.255 M P SPECIAL
LCM140J 05 30.00 1.181 2.56 14.60 7.32 0.288 M P SPECIAL
LCM140J 06 35.00 1.378 2.15 12.30 8.15 0.321 N Q SPECIAL
LCM140J 07 40.00 1.575 1.87 10.70 8.97 0.353 N Q SPECIAL
LCM140J 08 45.00 1.772 1.65 9.40 9.80 0.386 N Q SPECIAL
LCM140J 09 50.00 1.969 1.47 8.40 10.64 0.419 P R SPECIAL
LCM140J 10 55.00 2.165 1.33 7.60 11.46 0.451 P R SPECIAL
LCM140J 11 60.00 2.362 1.21 6.90 12.29 0.484 P R SPECIAL
LCM140J 12 65.00 2.559 1.12 6.40 13.13 0.517 Q S SPECIAL
LCM140J 13 70.00 2.756 1.03 5.90 13.97 0.550 Q S SPECIAL
LCM140J 14 80.00 3.150 0.90 5.13 15.62 0.615 R T SPECIAL
LCM200J 01 2.00 0.079 13.50 0.532 172.58 38.80 22.00 0.866 13.83 79.00 9.53 0.375 Q T SPECIAL
LCM200J 02 25.00 0.984 11.85 67.70 10.44 0.411 Q T SPECIAL
LCM200J 03 30.00 1.181 9.58 54.70 11.99 0.472 R U SPECIAL
LCM200J 04 35.00 1.378 8.04 45.90 13.51 0.532 R U SPECIAL
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 93
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
94 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 067K 01 21.46 0.845 22.23 0.875 1.70 0.067 17.48 0.688 71.17 16.00 19.05 0.750 5.99 34.20 6.86 0.270 Q T X
LC 067K 02 22.23 0.875 4.97 28.40 7.49 0.295 Q T X
LC 067K 03 25.40 1.000 4.25 24.30 8.15 0.321 R U Y
LC 067K 04 31.75 1.250 3.31 18.90 9.45 0.372 R U Y
LC 067K 05 38.10 1.500 2.70 15.40 10.74 0.423 R U Y
LC 067K 06 50.80 2.000 1.98 11.30 13.36 0.526 S V Z
LC 067K 07 63.50 2.500 1.56 8.90 15.95 0.628 T W BA
LC 067K 08 76.20 3.000 1.28 7.30 18.54 0.730 U X BB
LC 067K 09 88.90 3.500 1.10 6.30 21.13 0.832 V Y BC
LC 067K 10 101.60 4.000 0.96 5.50 23.72 0.934 W Z BD
LC 072K 01 1.83 0.072 17.20 0.677 102.30 23.00 22.23 0.875 7.11 40.60 7.85 0.309 Q T X
LC 072K 02 25.40 1.000 6.11 34.90 8.48 0.334 R U Y
LC 072K 03 31.75 1.250 4.71 26.90 9.86 0.388 R U Y
LC 072K 04 38.10 1.500 3.82 21.80 11.23 0.442 R U Y
LC 072K 05 44.45 1.750 3.22 18.40 12.60 0.496 S V Z
LC 072K 06 50.80 2.000 2.80 16.00 13.89 0.547 S V Z
LC 072K 07 63.50 2.500 2.19 12.50 16.71 0.658 T W BA
LC 072K 08 76.20 3.000 1.82 10.40 19.28 0.759 U Y BC
LC 072K 09 88.90 3.500 1.54 8.80 21.97 0.865 V Z BD
LC 075K 01 1.91 0.075 17.12 0.674 93.68 21.06 22.35 0.880 7.02 40.10 9.01 0.355 Q T SPECIAL
LC 075K 02 25.40 1.000 6.03 34.44 9.85 0.388 R U SPECIAL
LC 075K 03 31.75 1.250 4.66 26.61 11.59 0.456 R U SPECIAL
LC 075K 04 38.10 1.500 3.80 21.68 13.33 0.525 R U SPECIAL
LC 075K 05 44.45 1.750 3.20 18.30 15.07 0.593 S V SPECIAL
LC 075K 06 50.80 2.000 2.77 15.82 16.81 0.662 S V SPECIAL
LC 075K 07 57.15 2.250 2.44 13.94 18.56 0.731 T W SPECIAL
LC 075K 08 63.50 2.500 2.18 12.46 20.30 0.799 T W SPECIAL
LC 075K 09 69.85 2.750 1.97 11.26 22.04 0.868 U Y SPECIAL
LC 075K 10 76.20 3.000 1.80 10.27 23.78 0.936 U Y SPECIAL
LC 075K 11 88.90 3.500 1.53 8.74 27.27 1.074 V Z SPECIAL
LC 080K 001 2.03 0.080 16.84 0.663 133.44 30.00 19.05 0.750 11.85 67.70 8.18 0.322 L M SPECIAL
LC 080K 00 22.23 0.875 10.02 57.20 9.19 0.362 R U SPECIAL
LC 080K 0 25.40 1.000 8.49 48.50 10.08 0.397 R U SPECIAL
LC 080K 01 31.75 1.250 6.65 38.00 11.61 0.457 R U SPECIAL
LC 080K 02 34.93 1.375 5.95 34.00 12.45 0.490 S V SPECIAL
LC 080K 03 38.10 1.500 5.43 31.00 13.26 0.522 S V SPECIAL
LC 080K 04 44.45 1.750 4.55 26.00 15.11 0.595 S V SPECIAL
LC 080K 05 50.80 2.000 3.85 22.00 17.02 0.670 T X SPECIAL
LC 080K 06 57.15 2.250 3.41 19.50 18.36 0.723 U Y SPECIAL
LC 080K 07 63.50 2.500 3.06 17.50 19.96 0.786 V Z SPECIAL
LC 080K 08 69.85 2.750 2.71 15.50 21.97 0.865 W BA SPECIAL
LC 080K 09 76.20 3.000 2.54 14.50 23.62 0.930 X BB SPECIAL
LC 080K 10 88.90 3.500 2.10 12.00 27.51 1.083 Y BC SPECIAL
LC 085K 00 2.16 0.085 16.61 0.654 155.68 35.00 19.05 0.750 15.08 86.10 9.04 0.356 R U SPECIAL
LC 085K 0 25.40 1.000 10.68 61.00 10.80 0.425 R U SPECIAL
LC 085K 01 31.75 1.250 8.05 46.00 12.88 0.507 R U SPECIAL
LC 085K 02 34.93 1.375 7.35 42.00 13.64 0.537 S V SPECIAL
LC 085K 03 38.10 1.500 6.65 38.00 14.71 0.579 S V SPECIAL
LC 085K 04 44.45 1.750 5.60 32.00 16.89 0.665 S V SPECIAL
LC 085K 05 50.80 2.000 4.73 27.00 18.69 0.736 T X SPECIAL
LC 085K 06 57.15 2.250 4.20 24.00 20.85 0.821 U Y SPECIAL
LC 085K 07 63.50 2.500 3.76 21.50 22.81 0.898 V Z SPECIAL
LC 085K 08 69.85 2.750 3.41 19.50 24.41 0.961 W BA SPECIAL
LC 085K 09 76.20 3.000 3.15 18.00 26.04 1.025 X BB SPECIAL
LC 085K 10 88.90 3.500 2.63 15.00 30.23 1.190 Y BC SPECIAL
LC 085K 11 101.60 4.000 2.28 13.00 34.11 1.343 Z BD SPECIAL
LC 091K 00 2.31 0.091 16.31 0.642 186.82 42.00 22.23 0.875 16.28 93.00 10.59 0.417 R X SPECIAL
LC 091K 0A 25.40 1.000 13.83 79.00 11.63 0.458 R X SPECIAL
LC 091K 0 31.75 1.250 10.58 60.40 13.82 0.544 S Y SPECIAL
LC 091K 01 38.10 1.500 8.58 49.00 16.43 0.647 S Y SPECIAL
LC 091K 02 44.45 1.750 7.18 41.00 18.54 0.730 T Y SPECIAL
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 95
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
96 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 148KK 06 22.23 0.875 23.01 0.906 3.76 0.148 14.20 0.559 932.44 209.63 69.85 2.750 34.92 199.44 42.59 1.677 Z BB SPECIAL
LC 148KK 07 76.20 3.000 31.69 181.00 46.14 1.817 BA BC SPECIAL
LC 148KK 08 88.90 3.500 26.75 152.75 53.24 2.096 BB BD SPECIAL
LC 148KK 09 101.60 4.000 23.14 132.13 60.34 2.376 BC BE SPECIAL
LC 148KK 10 114.30 4.500 20.38 116.42 67.44 2.655 BD BF SPECIAL
LC 148KK 11 127.00 5.000 18.22 104.04 74.54 2.935 BE BG SPECIAL
LC 148KK 12 139.70 5.500 16.47 94.05 81.64 3.214 BF BH SPECIAL
LC 148KK 13 152.40 6.000 15.02 85.80 88.74 3.494 BG BJ SPECIAL
LC 105KL 01 23.01 0.906 23.83 0.938 2.67 0.105 17.02 0.670 259.24 58.28 22.23 0.875 25.27 144.30 11.97 0.471 U W SPECIAL
LC 105KL 02 25.40 1.000 21.27 121.47 13.18 0.519 U W SPECIAL
LC 105KL 03 31.75 1.250 16.16 92.27 15.62 0.615 V X SPECIAL
LC 105KL 04 38.10 1.500 13.03 74.39 18.05 0.711 V X SPECIAL
LC 105KL 05 44.45 1.750 10.91 62.31 20.48 0.806 W Y SPECIAL
LC 105KL 06 50.80 2.000 9.39 53.61 22.91 0.902 W Y SPECIAL
LC 105KL 07 57.15 2.250 8.24 47.04 25.35 0.998 X Z SPECIAL
LC 105KL 08 63.50 2.500 7.34 41.90 27.78 1.094 X Z SPECIAL
LC 105KL 09 69.85 2.750 6.62 37.78 30.21 1.190 Y BA SPECIAL
LC 105KL 10 76.20 3.000 6.02 34.39 32.65 1.285 Y BA SPECIAL
LC 105KL 11 88.90 3.500 5.11 29.17 37.51 1.477 Z BB SPECIAL
LC 105KL 12 101.60 4.000 4.43 25.32 42.38 1.669 BA BC SPECIAL
LC 080KM 01 23.83 0.938 24.61 0.969 2.03 0.080 18.92 0.745 156.73 35.24 19.05 0.750 12.94 73.91 6.94 0.273 R U SPECIAL
LC 080KM 02 25.40 1.000 9.09 51.91 8.11 0.319 R U SPECIAL
LC 080KM 03 31.75 1.250 7.01 40.01 9.27 0.365 R U SPECIAL
LC 080KM 04 38.10 1.500 5.70 32.54 10.44 0.411 S V SPECIAL
LC 080KM 05 44.45 1.750 4.80 27.43 11.61 0.457 S V SPECIAL
LC 080KM 06 50.80 2.000 4.15 23.70 12.78 0.503 T W SPECIAL
LC 080KM 07 57.15 2.250 3.65 20.86 13.94 0.549 U X SPECIAL
LC 080KM 08 63.50 2.500 3.26 18.64 15.11 0.595 V Y SPECIAL
LC 080KM 09 69.85 2.750 2.95 16.84 16.28 0.641 W Z SPECIAL
LC 080KM 10 74.61 2.938 2.75 15.70 17.15 0.675 X BA SPECIAL
LC 080KM 11 76.20 3.000 2.69 15.35 17.44 0.687 X BA SPECIAL
LC 080KM 12 88.90 3.500 2.29 13.06 19.78 0.779 Y BB SPECIAL
LC 080KM 13 101.60 4.000 1.99 11.36 22.11 0.871 Z BC SPECIAL
LC 063L 01 24.64 0.970 25.40 1.000 1.60 0.063 20.55 0.809 62.27 14.00 19.05 0.750 4.48 25.60 5.33 0.210 U X BB
LC 063L 02 25.40 1.000 3.20 18.30 6.22 0.245 U X BB
LC 063L 03 31.75 1.250 2.49 14.20 7.01 0.276 V Y BC
LC 063L 04 38.10 1.500 2.03 11.60 7.80 0.307 V Y BC
LC 063L 05 44.45 1.750 1.73 9.90 8.61 0.339 W Z BD
LC 063L 06 50.80 2.000 1.49 8.50 9.40 0.370 W Z BD
LC 063L 07 57.15 2.250 1.31 7.50 10.19 0.401 X BA BE
LC 063L 08 63.50 2.500 1.17 6.70 10.97 0.432 X BA BE
LC 063L 09 69.85 2.750 1.07 6.10 11.76 0.463 Y BB BF
LC 063L 10 76.20 3.000 0.97 5.56 12.57 0.495 Z BC BG
LC 063L 11 88.90 3.500 0.82 4.70 14.15 0.557 BA BD BH
LC 063L 12 101.60 4.000 0.72 4.10 15.72 0.619 BB BE BJ
LC 072L 01 1.83 0.072 20.17 0.794 88.96 20.00 19.05 0.750 6.92 39.50 6.22 0.245 U X BB
LC 072L 02 25.40 1.000 4.90 28.00 7.54 0.297 U X BB
LC 072L 03 31.75 1.250 3.78 21.60 8.61 0.339 V Y BC
LC 072L 04 38.10 1.500 3.10 17.70 9.68 0.381 V Y BC
LC 072L 05 44.45 1.750 2.61 14.90 10.74 0.423 W Z BD
LC 072L 06 50.80 2.000 2.26 12.90 11.81 0.465 W Z BD
LC 072L 07 57.15 2.250 2.00 11.40 12.88 0.507 X BA BE
LC 072L 08 63.50 2.500 1.79 10.20 13.92 0.548 X BA BE
LC 072L 09 69.85 2.750 1.61 9.20 14.99 0.590 Y BB BF
LC 072L 10 76.20 3.000 1.47 8.40 16.05 0.632 Z BC BG
LC 072L 11 88.90 3.500 1.24 7.10 18.19 0.716 BA BD BH
LC 072L 12 101.60 4.000 1.09 6.20 20.32 0.800 BB BE BJ
LC 080L 01 2.03 0.080 19.79 0.779 133.44 30.00 19.05 0.750 10.59 60.50 6.86 0.270 U Y SPECIAL
LC 080L 02 25.40 1.000 7.63 43.60 8.38 0.330 U Y SPECIAL
LC 080L 03 31.75 1.250 5.94 33.90 9.55 0.376 V X SPECIAL
LC 080L 04 38.10 1.500 4.83 27.60 10.74 0.423 V X SPECIAL
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 97
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
98 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 112L 06 24.64 0.970 25.40 1.000 2.84 0.112 18.29 0.720 289.12 65.00 69.85 2.750 7.53 43.00 31.42 1.237 Z BC SPECIAL
LC 112L 07 76.20 3.000 6.83 39.00 34.24 1.348 BA BD SPECIAL
LC 112L 08 88.90 3.500 5.78 33.00 39.75 1.565 BB BE SPECIAL
LC 112L 09 101.60 4.000 5.01 28.64 41.50 1.634 BC BF SPECIAL
LC 115L 01 2.92 0.115 18.14 0.714 320.26 72.00 44.45 1.750 13.66 78.00 21.29 0.838 X BA SPECIAL
LC 115L 02 50.80 2.000 11.91 68.00 23.62 0.930 Y BB SPECIAL
LC 115L 03 57.15 2.250 10.33 59.00 26.54 1.045 Z BC SPECIAL
LC 115L 04 63.50 2.500 9.11 52.00 28.70 1.130 Z BC SPECIAL
LC 115L 05 76.20 3.000 7.53 43.00 33.78 1.330 BA BD SPECIAL
LC 115L 06 88.90 3.500 6.30 36.00 38.61 1.520 BB BE SPECIAL
LC 115L 07 101.60 4.000 5.60 32.00 43.94 1.730 BC BF SPECIAL
LC 120L 0 3.05 0.120 17.88 0.704 355.84 80.00 38.10 1.500 19.91 113.70 19.94 0.785 X BA SPECIAL
LC 120L 01 44.45 1.750 16.63 95.00 22.99 0.905 X BA SPECIAL
LC 120L 02 50.80 2.000 14.36 82.00 25.78 1.015 Y BB SPECIAL
LC 120L 03 57.15 2.250 12.43 71.00 28.78 1.133 Z BC SPECIAL
LC 120L 04 63.50 2.500 11.21 64.00 31.85 1.254 Z BC SPECIAL
LC 120L 05 76.20 3.000 9.11 52.00 36.98 1.456 BA BD SPECIAL
LC 120L 06 88.90 3.500 7.70 44.00 42.80 1.685 BB BE SPECIAL
LC 120L 07 01.60 4.000 6.65 38.00 48.90 1.925 BC BF SPECIAL
LC 125L 00 3.18 0.125 17.63 0.694 445.02 100.05 22.23 0.875 48.33 276.00 13.44 0.529 V X SPECIAL
LC 125L 0A 25.40 1.000 40.27 230.00 14.81 0.583 V X SPECIAL
LC 125L 0 31.75 1.250 30.20 172.50 17.58 0.692 W Z SPECIAL
LC 125L 01 38.10 1.500 24.20 138.20 19.71 0.776 X BA SPECIAL
LC 125L 02 44.45 1.750 20.17 115.20 22.38 0.881 X BA SPECIAL
LC 125L 03 50.80 2.000 17.28 98.70 25.07 0.987 Y BB SPECIAL
LC 125L 04 57.15 2.250 15.13 86.40 27.74 1.092 Z BC SPECIAL
LC 125L 05 63.50 2.500 13.45 76.80 30.40 1.197 Z BC SPECIAL
LC 125L 06 76.20 3.000 11.00 62.80 35.74 1.407 BA BD SPECIAL
LC 125L 07 88.90 3.500 9.32 53.20 41.10 1.618 BB BE SPECIAL
LC 125L 08 101.60 4.000 8.07 46.10 46.43 1.828 BC BF SPECIAL
LC 135L 00 3.43 0.135 17.15 0.675 471.49 106.00 22.23 0.875 64.09 366.00 14.99 0.590 W Z SPECIAL
LC 135L 0 25.40 1.000 53.06 303.00 16.61 0.654 X BA SPECIAL
LC 135L 01 38.10 1.500 31.52 180.00 23.16 0.912 Y BC SPECIAL
LC 135L 02 44.45 1.750 26.19 149.60 26.42 1.040 Z BD SPECIAL
LC 135L 03 50.80 2.000 22.41 128.00 29.69 1.169 BA BE SPECIAL
LC 135L 04 57.15 2.250 19.58 111.80 32.97 1.298 BB BF SPECIAL
LC 135L 05 63.50 2.500 17.39 99.30 36.25 1.427 BB BF SPECIAL
LC 135L 06 76.20 3.000 14.20 81.10 42.77 1.684 BC BG SPECIAL
LC 135L 07 88.90 3.500 12.01 68.60 49.33 1.942 BD BH SPECIAL
LC 135L 08 101.60 4.000 10.40 59.40 55.85 2.199 BE BJ SPECIAL
LC 148L 01 3.76 0.148 16.51 0.650 618.27 139.00 25.40 1.000 80.37 459.00 18.21 0.717 Y BB SPECIAL
LC 148L 02 38.10 1.500 47.00 268.40 25.65 1.010 Z BC SPECIAL
LC 148L 03 50.80 2.000 33.20 189.60 33.10 1.303 BA BD SPECIAL
LC 148L 04 63.50 2.500 25.67 146.60 40.54 1.596 BB BE SPECIAL
LC 148L 05 76.20 3.000 20.92 119.50 47.98 1.889 BC BF SPECIAL
LC 148L 06 88.90 3.500 17.67 100.90 55.40 2.181 BD BG SPECIAL
LC 148L 07 101.60 4.000 15.27 87.20 62.89 2.476 BE BH SPECIAL
LC 162L 01 4.11 0.162 15.80 0.622 818.43 184.00 38.10 1.500 72.70 415.20 27.64 1.088 BA BD SPECIAL
LC 162L 02 50.80 2.000 51.01 291.30 35.79 1.409 BB BE SPECIAL
LC 162L 03 63.50 2.500 39.29 224.40 43.92 1.729 BC BF SPECIAL
LC 162L 04 76.20 3.000 31.96 182.50 52.07 2.050 BD BG SPECIAL
LC 162L 05 88.90 3.500 26.91 153.70 60.22 2.371 BE BH SPECIAL
LC 162L 06 101.60 4.000 23.25 132.80 68.38 2.692 BF BJ SPECIAL
LC 120LL 01 25.81 1.016 28.58 1.125 3.05 0.120 19.05 0.750 339.48 76.32 25.40 1.000 29.67 169.42 13.96 0.550 W Z SPECIAL
LC 120LL 02 38.10 1.500 17.89 102.19 19.01 0.748 X BA SPECIAL
LC 120LL 03 50.80 2.000 12.81 73.16 24.05 0.947 Y BB SPECIAL
LC 120LL 04 57.15 2.250 11.22 64.06 26.59 1.047 Z BC SPECIAL
LC 120LL 05 65.09 2.563 9.71 55.44 29.74 1.171 Z BC SPECIAL
LC 120LL 06 69.85 2.750 8.98 51.30 31.64 1.246 BA BD SPECIAL
LC 120LL 07 76.20 3.000 8.17 46.65 34.16 1.345 BA BD SPECIAL
LC 120LL 08 88.90 3.500 6.92 39.50 39.22 1.544 BB BE SPECIAL
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 99
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
100 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE SPRING
STOCK IN HOLE WIRE OVER ROD LOAD AT FREE SOLID
DIAMETER RATE Music 302 316
NUMBER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH HEIGHT Wire Stainless Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/mm
LB/IN MM IN M S S316
LC 120M 09 27.81 1.095 28.58 1.125 3.05 0.120 21.01 0.827 346.94 78.00 101.60 4.000 5.43 31.00 38.05 1.498 BC BG SPECIAL
LC 120M 10 114.30 4.500 4.78 27.30 42.32 1.666 BD BH SPECIAL
LC 125M 00 3.18 0.125 20.90 0.823 400.35 90.00 22.23 0.875 39.22 224.00 12.17 0.479 V X SPECIAL
LC 125M 0A 25.40 1.000 32.66 186.50 13.28 0.523 V X SPECIAL
LC 125M 0B 31.75 1.250 24.51 140.00 15.52 0.611 W Z SPECIAL
LC 125M 0 38.10 1.500 19.61 112.00 17.15 0.675 W BA SPECIAL
LC 125M 01 44.45 1.750 15.93 91.00 19.51 0.768 X BB SPECIAL
LC 125M 02 50.80 2.000 13.83 79.00 21.72 0.855 Y BC SPECIAL
LC 125M 03 57.15 2.250 12.08 69.00 24.26 0.955 Z BD SPECIAL
LC 125M 04 63.50 2.500 10.68 61.00 26.52 1.044 Z BD SPECIAL
LC 125M 05 76.20 3.000 8.76 50.00 30.30 1.193 BA BE SPECIAL
LC 125M 06 88.90 3.500 7.35 42.00 37.08 1.460 BB BF SPECIAL
LC 125M 07 101.60 4.000 6.30 36.00 39.80 1.567 BC BG SPECIAL
LC 125M 08 114.30 4.500 5.60 32.00 44.58 1.755 BD BH SPECIAL
LC 135M 0 3.43 0.135 20.29 0.799 444.80 100.00 38.10 1.500 24.51 140.00 19.89 0.783 Z BD SPECIAL
LC 135M 01 50.80 2.000 17.51 100.00 25.40 1.000 BA BE SPECIAL
LC 135M 02 57.15 2.250 15.41 88.00 27.89 1.098 BB BF SPECIAL
LC 135M 03 63.50 2.500 13.66 78.00 30.61 1.205 BB BF SPECIAL
LC 135M 04 76.20 3.000 11.21 64.00 36.20 1.425 BC BG SPECIAL
LC 135M 05 88.90 3.500 9.28 53.00 42.29 1.665 BD BH SPECIAL
LC 135M 06 101.60 4.000 8.05 46.00 47.45 1.868 BE BJ SPECIAL
LC 135M 07 114.30 4.500 7.00 40.00 52.40 2.063 BF BK SPECIAL
LC 135M 08 127.00 5.000 6.30 36.00 58.47 2.302 BG BL SPECIAL
LC 085N 01 30.94 1.218 31.75 1.250 2.16 0.085 25.70 1.012 93.41 21.00 22.23 0.875 6.41 36.60 7.72 0.304 V Z SPECIAL
LC 085N 02 25.40 1.000 5.45 31.10 8.31 0.327 V Z SPECIAL
LC 085N 03 38.10 1.500 3.40 19.40 10.62 0.418 W BA SPECIAL
LC 085N 04 50.80 2.000 2.47 14.10 12.93 0.509 X BB SPECIAL
LC 085N 05 63.50 2.500 1.94 11.10 15.24 0.600 Y BC SPECIAL
LC 085N 06 76.20 3.000 1.59 9.10 17.60 0.693 Z BD SPECIAL
LC 085N 07 88.90 3.500 1.37 7.80 19.79 0.779 BA BE SPECIAL
LC 085N 08 101.60 4.000 1.17 6.70 22.33 0.879 BB BF SPECIAL
LC 085N 09 114.30 4.500 1.05 6.00 24.41 0.961 BC BG SPECIAL
LC 085N 10 127.00 5.000 0.93 5.30 27.03 1.064 BD BH SPECIAL
LC 095N 01 2.41 0.095 25.20 0.992 142.34 32.00 22.23 0.875 10.44 59.60 8.56 0.337 W BA SPECIAL
LC 095N 02 25.40 1.000 8.83 50.40 9.22 0.363 W BA SPECIAL
LC 095N 03 31.75 1.250 6.74 38.50 10.54 0.415 X BB SPECIAL
LC 095N 04 38.10 1.500 5.45 31.10 11.86 0.467 X BB SPECIAL
LC 095N 05 44.45 1.750 4.57 26.10 13.18 0.519 X BB SPECIAL
LC 095N 06 50.80 2.000 3.94 22.50 14.50 0.571 Z BD SPECIAL
LC 095N 07 57.15 2.250 3.47 19.80 15.80 0.622 Z BD SPECIAL
LC 095N 08 63.50 2.500 3.08 17.60 17.15 0.675 Z BD SPECIAL
LC 095N 09 69.85 2.750 2.78 15.90 18.47 0.727 BA BE SPECIAL
LC 095N 10 76.20 3.000 2.54 14.50 19.76 0.778 BA BE SPECIAL
LC 095N 11 88.90 3.500 2.15 12.30 22.40 0.882 BB BF SPECIAL
LC 095N 12 101.60 4.000 1.87 10.70 25.02 0.985 BC BG SPECIAL
LC 095N 13 114.30 4.500 1.66 9.50 27.53 1.084 BD BH SPECIAL
LC 095N 14 127.00 5.000 1.49 8.50 30.20 1.189 BE BJ SPECIAL
LC 105N 01 2.67 0.105 24.74 0.974 182.37 41.00 22.23 0.875 14.45 82.50 9.70 0.382 X BB SPECIAL
LC 105N 02 25.40 1.000 12.17 69.50 10.52 0.414 X BB SPECIAL
LC 105N 03 31.75 1.250 9.25 52.80 12.09 0.476 Y BC SPECIAL
LC 105N 04 38.10 1.500 7.44 42.50 13.69 0.539 Y BC SPECIAL
LC 105N 05 50.80 2.000 5.38 30.70 16.84 0.663 Z BD SPECIAL
LC 105N 06 63.50 2.500 4.20 24.00 19.99 0.787 BA BE SPECIAL
LC 105N 07 76.20 3.000 3.45 19.70 23.16 0.912 BB BF SPECIAL
LC 105N 08 88.90 3.500 2.92 16.70 26.34 1.037 BC BG SPECIAL
LC 105N 09 101.60 4.000 2.54 14.50 29.51 1.162 BD BH SPECIAL
LC 105N 10 114.30 4.500 2.24 12.80 32.69 1.287 BE BJ SPECIAL
LC 105N 11 127.00 5.000 2.01 11.50 35.76 1.408 BF BK SPECIAL
LC 112N 00 2.84 0.112 24.38 0.960 231.30 52.00 22.23 0.875 19.04 108.75 10.36 0.408 Y BC SPECIAL
LC 112N 0A 25.40 1.000 15.96 91.12 11.23 0.442 Y BC SPECIAL
LC 112N 0 31.75 1.250 12.08 69.00 12.95 0.510 Z BD SPECIAL
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 101
C O M P R E S S I O N S P R I N G S : S TA N D A R D S E R I E S
● End Coils Closed and Ground Square ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302 316
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless Stainless
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098
102 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : H E AV Y D U T Y S E R I E S
● End Coils Closed and Ground Square ● Oil Tempered MB* (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/MM LB/IN MM IN M S
LHC 142H 01 27.81 1.095 28.58 1.125 3.61 0.142 20.04 0.789 444.83 100.00 50.80 2.000 20.14 115.00 28.45 1.120 BA BG
LHC 142H 02 55.56 2.188 17.51 100.00 30.48 1.200 BB BG
LHC 142H 03 63.50 2.500 15.41 88.00 34.54 1.360 BC BH
LHC 142H 04 69.85 2.750 13.66 78.00 38.10 1.500 BD BJ
LHC 142H 05 84.15 3.313 11.21 64.00 45.34 1.785 BE BK
LHC 142H 06 101.60 4.000 9.28 53.00 54.36 2.140 BF BL
LHC 142H 07 114.30 4.500 8.06 46.00 60.12 2.367 BG BM
LHC 142H 08 127.00 5.000 7.36 42.00 67.06 2.640 BH BN
LHC 142J 0 3.61 0.142 20.04 0.789 533.80 120.00 44.45 1.750 26.27 150.00 23.95 0.943 BA BF
LHC 142J 01 50.80 2.000 22.59 129.00 26.92 1.060 BB BF
LHC 142J 02 57.15 2.250 19.44 111.00 29.72 1.170 BB BG
LHC 142J 03 63.50 2.500 17.16 98.00 32.64 1.285 BC BH
LHC 142J 04 69.85 2.750 15.41 88.00 35.56 1.400 BD BJ
LHC 142J 05 76.20 3.000 14.01 80.00 38.35 1.510 BD BK
LHC 142J 06 88.90 3.500 11.73 67.00 43.69 1.720 BE BL
LHC 142J 07 101.60 4.000 10.33 59.00 49.53 1.950 BF BM
LHC 142J 08 114.30 4.500 8.93 51.00 54.97 2.164 BG BN
LHC 142J 09 127.00 5.000 8.06 46.00 61.47 2.420 BH BP
LHC 148J 0 3.76 0.148 19.74 0.777 600.52 135.00 44.45 1.750 30.65 175.00 25.40 1.000 BA BG
LHC 148J 01 50.80 2.000 26.09 149.00 28.58 1.125 BB BG
LHC 148J 02 57.15 2.250 22.77 130.00 31.50 1.240 BB BH
LHC 148J 03 63.50 2.500 20.14 115.00 34.54 1.360 BC BJ
LHC 148J 04 69.85 2.750 18.04 103.00 37.47 1.475 BD BK
LHC 148J 05 76.20 3.000 16.46 94.00 40.51 1.595 BD BL
LHC 148J 06 88.90 3.500 13.84 79.00 46.48 1.830 BE BM
LHC 148J 07 101.60 4.000 11.91 68.00 52.58 2.070 BF BP
LHC 148J 08 114.30 4.500 10.51 60.00 58.55 2.305 BG BQ
LHC 148J 09 127.00 5.000 9.46 54.00 64.52 2.540 BH BS
LHC 148M 00 30.94 1.218 31.75 1.250 3.76 0.148 22.61 0.890 512.00 115.00 22.23 0.875 61.67 352.00 13.94 0.549 BA BD
LHC 148M 0A 25.40 1.000 50.72 289.50 15.27 0.601 BA BD
LHC 148M 0B 31.75 1.250 37.40 213.50 17.95 0.707 BB BE
LHC 148M 0C 38.10 1.500 29.69 169.50 20.60 0.811 BB BE
LHC 148M 0D 50.80 2.000 20.93 119.50 25.99 1.023 BC BF
LHC 148M 01 57.15 2.250 18.27 104.30 28.65 1.128 BC BP
LHC 148M 02 63.50 2.500 16.19 92.47 31.32 1.233 BD BP
LHC 148M 03 76.20 3.000 13.20 75.37 36.68 1.444 BD BP
LHC 148M 04 88.90 3.500 11.14 63.61 42.01 1.654 BE BQ
LHC 148M 05 95.25 3.750 10.33 59.01 44.68 1.759 BF BQ
LHC 148M 06 101.60 4.000 9.64 55.02 47.37 1.865 BF BQ
LHC 148M 07 114.30 4.500 8.49 48.48 52.71 2.075 BG BT
LHC 148M 08 127.00 5.000 7.59 43.33 58.06 2.286 BH BU
LHC 148M 09 139.70 5.500 6.86 39.16 63.40 2.496 BJ BU
LHC 148M 10 152.40 6.000 6.26 35.73 68.76 2.707 BK BW
LHC 156M 01 3.96 0.156 22.33 0.879 622.76 140.00 57.15 2.250 22.77 130.00 29.59 1.165 BC BP
LHC 156M 02 63.50 2.500 19.79 113.00 32.84 1.293 BD BP
LHC 156M 03 76.20 3.000 16.29 93.00 38.20 1.504 BD BS
LHC 156M 04 88.90 3.500 13.66 78.00 44.07 1.735 BE BT
LHC 156M 05 95.25 3.750 12.61 72.00 47.04 1.852 BF BU
LHC 156M 06 101.60 4.000 11.91 68.00 49.53 1.950 BF BW
LHC 156M 07 114.30 4.500 10.51 60.00 54.99 2.165 BG BW
LHC 156M 08 127.00 5.000 9.28 53.00 61.06 2.404 BH BW
LHC 156M 09 139.70 4.500 10.51 60.00 54.99 2.165 BJ BW
LHC 156M 10 152.40 6.000 7.71 44.00 73.91 2.910 BK BY
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 103
C O M P R E S S I O N S P R I N G S : H E AV Y D U T Y S E R I E S
● End Coils Closed and Ground Square ● Oil Tempered MB* (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING SOLID
STOCK Music 302
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE HEIGHT
NUMBER Wire Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/MM LB/IN MM IN M S
LHC 162N 0A 30.94 1.218 31.75 1.250 4.11 0.162 22.02 0.867 712.00 160.00 25.40 1.000 75.07 428.50 16.79 0.661 BB BS
LHC 162N 0B 38.10 1.500 43.18 246.50 22.93 0.903 BB BS
LHC 162N 0C 50.80 2.000 30.31 173.00 29.07 1.145 BC BS
LHC 162N 0 57.15 2.250 26.27 150.00 31.75 1.250 BC BS
LHC 162N 01 63.50 2.500 23.29 133.00 34.24 1.348 BK BS
LHC 162N 02 76.20 3.000 19.26 110.00 39.67 1.562 BD BT
LHC 162N 03 88.90 3.500 15.94 91.00 46.25 1.821 BE BT
LHC 162N 04 95.25 3.750 14.89 85.00 48.92 1.926 BF BW
LHC 162N 05 101.60 4.000 13.84 79.00 52.02 2.048 BF BW
LHC 162N 06 114.30 4.500 12.26 70.00 57.66 2.270 BG BW
LHC 162N 07 127.00 5.000 11.03 63.00 63.12 2.485 BH BY
LHC 162N 08 133.35 5.250 10.51 60.00 65.89 2.594 BH BY
LHC 162N 09 139.70 5.500 9.81 56.00 70.61 2.780 BJ CB
LHC 162N 10 152.40 6.000 8.93 51.00 76.58 3.015 BK CD
LHC 177N 01 4.50 0.177 21.18 0.834 779.00 175.00 38.10 1.500 61.84 353.00 25.67 1.011 BC BQ
LHC 177N 02 50.80 2.000 43.06 245.80 32.82 1.292 BC BQ
LHC 177N 03 63.50 2.500 33.02 188.50 39.99 1.574 BD BT
LHC 177N 04 76.20 3.000 26.79 152.90 47.14 1.856 BE BU
LHC 177N 05 88.90 3.500 22.53 128.60 54.30 2.138 BF BW
LHC 177N 06 101.60 4.000 19.43 110.90 61.48 2.421 BG BW
LHC 177N 07 114.30 4.500 17.10 97.60 68.60 2.701 BH BY
LHC 177N 08 127.00 5.000 15.26 87.10 75.75 2.982 BJ CA
LHC 192N 01 4.88 0.192 20.42 0.804 962.00 216.00 38.10 1.500 90.41 516.10 27.65 1.089 BD BS
LHC 192N 02 50.80 2.000 62.44 356.40 35.54 1.399 BD BT
LHC 192N 03 63.50 2.500 47.69 272.20 43.42 1.710 BE BU
LHC 192N 04 76.20 3.000 38.58 220.20 51.31 2.020 BF BU
LHC 192N 05 88.90 3.500 32.37 184.80 59.21 2.331 BG BU
LHC 192N 06 101.60 4.000 27.91 159.30 67.08 2.641 BH BY
LHC 192N 07 114.30 4.500 24.51 139.90 74.99 2.952 BJ BY
LHC 192N 08 127.00 5.000 21.86 124.80 82.85 3.262 BK CB
LHC 207N 01 5.26 0.207 19.69 0.775 1124.00 252.50 50.80 2.000 88.43 504.80 38.23 1.505 BE CB
LHC 207N 02 63.50 2.500 67.24 383.80 46.87 1.845 BF CD
LHC 207N 03 76.20 3.000 54.24 309.60 55.51 2.185 BG CD
LHC 207N 04 88.90 3.500 45.44 259.40 64.15 2.526 BH CF
LHC 207N 05 101.60 4.000 39.10 223.20 72.80 2.866 BJ CF
LHC 207N 06 114.30 4.500 34.32 195.90 81.44 3.206 BK CH
LHC 207N 07 127.00 5.000 30.59 174.60 90.05 3.545 BL CJ
LHC 162P 0 35.56 1.400 36.50 1.438 4.11 0.162 26.52 1.044 622.76 140.00 57.15 2.250 20.32 116.00 27.31 1.075 BE BS
LHC 162P 01 63.50 2.500 17.86 102.00 29.72 1.170 BF BS
LHC 162P 02 76.20 3.000 14.54 83.00 34.54 1.360 BF BT
LHC 162P 03 88.90 3.500 12.26 70.00 39.37 1.550 BG BU
LHC 162P 04 101.60 4.000 10.51 60.00 44.20 1.740 BH BW
LHC 162P 05 107.95 4.250 9.98 57.00 46.48 1.830 BH BW
LHC 162P 06 114.30 4.500 9.28 53.00 48.90 1.925 BJ BW
LHC 162P 07 127.00 5.000 8.41 48.00 53.72 2.115 BK BY
LHC 162P 08 133.35 5.250 7.88 45.00 56.13 2.210 BK CA
LHC 177P 0 4.50 0.177 25.76 1.014 800.00 180.00 57.15 2.250 29.60 169.00 30.10 1.185 BE BU
LHC 177P 01 63.50 2.500 26.09 149.00 32.89 1.295 BF BU
LHC 177P 02 76.20 3.000 21.02 120.00 38.30 1.508 BF BW
LHC 177P 03 88.90 3.500 17.51 100.00 43.69 1.720 BG BW
LHC 177P 04 101.60 4.000 15.24 87.00 49.02 1.930 BH BY
LHC 177P 05 107.95 4.250 14.19 81.00 51.79 2.039 BH CA
LHC 177P 06 114.30 4.500 13.31 76.00 54.64 2.151 BJ CA
LHC 177P 07 127.00 5.000 12.08 69.00 59.94 2.360 BK CB
LHC 177P 08 133.35 5.250 11.38 65.00 62.99 2.480 BK CD
104 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : H E AV Y D U T Y S E R I E S
● End Coils Closed and Ground Square ● Oil Tempered MB* (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/MM LB/IN MM IN M S
LHC 148R 01 37.08 1.460 38.10 1.500 3.76 0.148 28.58 1.125 400.00 90.00 38.10 1.500 19.92 113.70 18.14 0.714 BB BG
LHC 148R 02 50.80 2.000 14.07 80.30 22.47 0.885 BC BK
LHC 148R 03 63.50 2.500 10.88 62.10 26.79 1.055 BD BK
LHC 148R 04 76.20 3.000 8.86 50.60 31.11 1.225 BE BL
LHC 148R 05 88.90 3.500 7.48 42.70 35.44 1.395 BF BM
LHC 148R 06 101.60 4.000 6.48 37.00 39.70 1.563 BG BQ
LHC 162R 01 4.11 0.162 27.89 1.098 512.00 115.00 38.10 1.500 28.45 162.40 20.29 0.799 BC BS
LHC 162R 02 50.80 2.000 19.97 114.00 25.31 0.996 BD BS
LHC 162R 03 63.50 2.500 15.38 87.80 30.33 1.194 BE BS
LHC 162R 04 76.20 3.000 12.51 71.40 35.35 1.392 BF BT
LHC 162R 05 88.90 3.500 10.53 60.10 40.40 1.591 BG BT
LHC 162R 06 101.60 4.000 9.11 52.00 45.38 1.786 BH BW
LHC 162R 07 114.30 4.500 8.01 45.70 50.46 1.987 BJ BW
LHC 162R 08 127.00 5.000 7.15 40.80 55.51 2.185 BK BW
LHC 187R 01 4.75 0.187 26.77 1.054 890.00 200.00 63.50 2.500 29.42 168.00 33.96 1.337 BF BW
LHC 187R 02 76.20 3.000 24.17 138.00 39.27 1.546 BF BW
LHC 187R 03 88.90 3.500 20.32 116.00 44.93 1.769 BG CA
LHC 187R 04 101.60 4.000 17.34 99.00 51.00 2.008 BH CB
LHC 187R 05 107.95 4.250 16.11 92.00 54.13 2.131 BH CD
LHC 187R 06 114.30 4.500 15.06 86.00 57.28 2.255 BJ CE
LHC 187R 07 127.00 5.000 13.49 77.00 62.84 2.474 BK CE
LHC 187R 08 133.35 5.250 12.78 73.00 65.79 2.590 BK CE
LHC 207S 01 40.13 1.580 41.28 1.625 5.26 0.207 28.55 1.124 1023.00 230.00 63.50 2.500 36.78 210.00 36.07 1.420 BG CF
LHC 207S 02 76.20 3.000 29.77 170.00 42.06 1.656 BH CF
LHC 207S 03 88.90 3.500 24.87 142.00 48.26 1.900 BJ CG
LHC 207S 04 101.60 4.000 21.19 121.00 54.84 2.159 BK CG
LHC 207S 05 114.30 4.500 18.74 107.00 60.60 2.386 BL CH
LHC 207S 06 127.00 5.000 16.64 95.00 66.93 2.635 BM CJ
LHC 207S 07 139.70 5.500 15.06 86.00 71.27 2.806 BP CK
LHC 207S 08 152.40 6.000 13.84 79.00 78.38 3.086 BQ CL
LHC 148T 01 42.85 1.687 44.45 1.750 3.76 0.148 34.01 1.339 355.00 79.80 38.10 1.500 15.71 89.70 15.91 0.626 BE BJ
LHC 148T 02 50.80 2.000 11.11 63.40 19.30 0.760 BE BL
LHC 148T 03 63.50 2.500 8.58 49.00 22.70 0.894 BF BL
LHC 148T 04 76.20 3.000 6.99 39.90 26.11 1.028 BF BM
LHC 148T 05 88.90 3.500 5.90 33.70 29.48 1.161 BG BP
LHC 148T 06 101.60 4.000 5.10 29.10 32.92 1.296 BG BQ
LHC 148T 07 114.30 4.500 4.50 25.70 36.25 1.427 BH BQ
LHC 148T 08 127.00 5.000 4.01 22.90 39.74 1.564 BH BR
LHC 162T 01 4.11 0.162 33.32 1.312 445.00 100.00 38.10 1.500 22.04 125.80 17.88 0.704 BF BR
LHC 162T 02 50.80 2.000 15.45 88.20 21.89 0.862 BF BR
LHC 162T 03 63.50 2.500 11.91 68.00 25.88 1.019 BG BR
LHC 162T 04 76.20 3.000 9.69 55.30 29.87 1.176 BG BT
LHC 162T 05 88.90 3.500 8.16 46.60 33.87 1.333 BH BU
LHC 162T 06 101.60 4.000 7.04 40.20 37.91 1.492 BH BW
LHC 162T 07 114.30 4.500 6.20 35.40 41.90 1.650 BJ BW
LHC 162T 08 127.00 5.000 5.54 31.60 45.92 1.808 BJ BY
LHC 177T 01 4.50 0.177 32.61 1.284 570.00 128.00 38.10 1.500 31.13 177.70 19.94 0.785 BF BU
LHC 177T 02 50.80 2.000 21.67 123.70 24.60 0.969 BG BU
LHC 177T 03 63.50 2.500 16.63 94.90 29.26 1.152 BG BU
LHC 177T 04 76.20 3.000 13.47 76.90 33.94 1.336 BH BW
LHC 177T 05 88.90 3.500 11.33 64.70 38.59 1.519 BH BY
LHC 177T 06 101.60 4.000 9.78 55.80 43.27 1.704 BH CA
LHC 177T 07 114.30 4.500 8.60 49.10 47.91 1.886 BJ CA
LHC 177T 08 127.00 5.000 7.67 43.80 52.59 2.070 BJ CB
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 105
C O M P R E S S I O N S P R I N G S : H E AV Y D U T Y S E R I E S
● End Coils Closed and Ground Square ● Oil Tempered MB* (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING SOLID
STOCK Music 302
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE HEIGHT
NUMBER Wire Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/MM LB/IN MM IN M S
LHC 192T 01 42.85 1.687 44.45 1.750 4.88 0.192 31.88 1.255 707.60 159.00 38.10 1.500 43.34 247.40 21.92 0.863 BG BT
LHC 192T 02 50.80 2.000 29.94 170.90 27.23 1.072 BG BW
LHC 192T 03 63.50 2.500 22.86 130.50 32.55 1.281 BH CB
LHC 192T 04 76.20 3.000 18.50 105.60 37.86 1.490 BH CB
LHC 192T 05 88.90 3.500 15.52 88.60 43.19 1.700 BJ CA
LHC 192T 06 101.60 4.000 13.38 76.40 48.48 1.909 BJ CD
LHC 192T 07 114.30 4.500 11.76 67.10 53.81 2.119 BK CG
LHC 192T 08 127.00 5.000 10.48 59.80 59.16 2.329 BK CG
LHC 218T 01 5.54 0.218 30.71 1.209 1112.00 250.00 63.50 2.500 39.93 228.00 35.94 1.415 BG CF
LHC 218T 02 76.20 3.000 31.70 181.00 42.88 1.688 BH CF
LHC 218T 03 88.90 3.500 26.62 152.00 48.34 1.903 BJ CG
LHC 218T 04 101.60 4.000 22.77 130.00 54.66 2.152 BL CH
LHC 218T 05 114.30 4.500 19.96 114.00 60.63 2.387 BM CJ
LHC 218T 06 127.00 5.000 17.86 102.00 66.68 2.625 BP CK
LHC 218T 07 139.70 5.500 15.94 91.00 73.38 2.889 BQ CL
LHC 218T 08 152.40 6.000 14.71 84.00 78.56 3.093 BS CL
LHC 234T 01 5.94 0.234 29.90 1.177 1334.00 300.00 63.50 2.500 54.25 309.76 38.84 1.529 BL CG
LHC 234T 02 76.20 3.000 43.54 248.59 45.49 1.791 BM CG
LHC 234T 03 88.90 3.500 36.36 207.60 52.12 2.052 BN CH
LHC 234T 04 101.60 4.000 31.21 178.21 58.75 2.313 BP CJ
LHC 234T 05 114.30 4.500 27.34 156.11 65.38 2.574 BS CL
LHC 234T 06 127.00 5.000 24.32 138.89 72.01 2.835 BS CM
LHC 234T 07 139.70 5.500 21.91 125.09 78.64 3.096 BT CN
LHC 234T 08 152.40 6.000 19.93 113.78 85.27 3.357 BU CN
LHC 148U 01 49.20 1.937 50.80 2.000 3.76 0.148 39.85 1.569 312.00 70.00 50.80 2.000 9.04 51.60 16.78 0.661 BG BM
LHC 148U 02 63.50 2.500 6.99 39.90 19.43 0.765 BG BP
LHC 148U 03 76.20 3.000 5.69 32.50 22.09 0.870 BH BQ
LHC 148U 04 88.90 3.500 4.80 27.40 24.77 0.975 BH BS
LHC 148U 05 101.60 4.000 4.15 23.70 27.42 1.080 BJ BT
LHC 148U 06 114.30 4.500 3.66 20.90 30.06 1.183 BJ BU
LHC 148U 07 127.00 5.000 3.28 18.70 32.69 1.287 BK BW
LHC 148U 08 139.70 5.500 2.96 16.90 35.34 1.391 BK BY
LHC 162U 01 4.11 0.162 39.22 1.544 396.00 89.00 50.80 2.000 12.40 70.80 19.07 0.751 BH BT
LHC 162U 02 63.50 2.500 9.55 54.50 22.24 0.876 BH BU
LHC 162U 03 76.20 3.000 7.76 44.30 25.41 1.001 BJ BW
LHC 162U 04 88.90 3.500 6.55 37.40 28.54 1.124 BL BY
LHC 162U 05 101.60 4.000 5.66 32.30 31.71 1.248 BM CA
LHC 162U 06 114.30 4.500 4.98 28.40 34.90 1.374 BM CA
LHC 162U 07 127.00 5.000 4.45 25.40 38.02 1.497 BN CB
LHC 162U 08 139.70 5.500 4.01 22.90 41.24 1.624 BP CD
LHC 177U 01 4.50 0.177 38.48 1.515 503.00 113.00 63.50 2.500 13.12 74.90 25.26 0.995 BJ BU
LHC 177U 02 76.20 3.000 10.65 60.80 28.97 1.141 BJ BW
LHC 177U 03 88.90 3.500 8.95 51.10 32.71 1.288 BK BY
LHC 177U 04 101.60 4.000 7.73 44.10 36.44 1.434 BM CA
LHC 177U 05 114.30 4.500 6.80 38.80 40.15 1.581 BN CB
LHC 177U 06 127.00 5.000 6.06 34.60 43.90 1.728 BP CD
LHC 177U 07 139.70 5.500 5.47 31.20 47.67 1.877 BR CE
LHC 177U 08 152.40 6.000 4.99 28.50 51.31 2.020 BT CF
106 Spring rates and maximum loads relate only to music wire. When using stainless steel multiply by 0.833
C O M P R E S S I O N S P R I N G S : H E AV Y D U T Y S E R I E S
● End Coils Closed and Ground Square ● Oil Tempered MB* (Plated) or Stainless Steel (Passivated)
LEE TO WORK NOMINAL TO WORK APPROXIMATE NOMINAL APPROXIMATE PRICE GROUP
OUTSIDE IN HOLE WIRE OVER ROD LOAD AT FREE SPRING
STOCK SOLID Music 302
DIAMETER DIA. MIN DIAMETER DIA. MAX. SOLID HEIGHT LENGTH RATE
NUMBER HEIGHT Wire Stainless
MM IN MM IN MM IN MM IN N LB MM IN N/MM LB/IN MM IN M S
LHC 192U 01 49.20 1.937 50.80 2.000 4.88 0.192 37.77 1.487 628.00 141.00 63.50 2.500 17.76 101.40 28.26 1.113 BK CB
LHC 192U 02 76.20 3.000 14.37 82.00 32.57 1.282 BK CB
LHC 192U 03 88.90 3.500 12.05 68.80 36.89 1.452 BL CD
LHC 192U 04 101.60 4.000 10.39 59.30 41.19 1.622 BP CE
LHC 192U 05 114.30 4.500 9.13 52.10 45.49 1.791 BQ CE
LHC 192U 06 127.00 5.000 8.15 46.50 49.76 1.959 BS CG
LHC 192U 07 139.70 5.500 7.34 41.90 54.12 2.131 BT CH
LHC 192U 08 152.40 6.000 6.69 38.20 58.39 2.299 BU CJ
LHC 207U 01 5.26 0.207 37.62 1.481 890.00 200.00 63.50 2.500 25.66 146.50 28.80 1.134 BL CF
LHC 207U 02 76.20 3.000 20.68 118.10 33.20 1.307 BM CF
LHC 207U 03 88.90 3.500 17.34 99.00 37.59 1.480 BN CG
LHC 207U 04 101.60 4.000 14.92 85.20 41.99 1.653 BP CH
LHC 207U 05 114.30 4.500 13.10 74.80 46.36 1.825 BR CJ
LHC 207U 06 127.00 5.000 11.66 66.60 50.75 1.998 BS CK
LHC 207U 07 139.70 5.500 10.53 60.10 55.14 2.171 BT CL
LHC 207U 08 152.40 6.000 9.58 54.70 59.51 2.343 BU CL
LHC 250U 01 6.35 0.250 35.43 1.395 1334.00 300.00 63.50 2.500 51.92 296.48 37.74 1.486 BL CL
LHC 250U 02 76.20 3.000 41.54 237.19 44.02 1.733 BM CL
LHC 250U 03 88.90 3.500 34.62 197.66 50.27 1.979 BR CM
LHC 250U 04 101.60 4.000 29.67 169.42 56.54 2.226 BS CM
LHC 250U 05 114.30 4.500 25.96 148.24 62.79 2.472 BT CM
LHC 250U 06 127.00 5.000 23.08 131.77 69.06 2.719 BU CN
LHC 250U 07 139.70 5.500 20.77 118.59 75.31 2.965 BW CN
LHC 250U 08 152.40 6.000 18.88 107.80 81.58 3.212 BY CN
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 107
COMPRESSION SPRINGS: HIGH PRESSURE SERIES
Solid Height
LHP 063E 03S 19.05 0.750 2.606 145.95 11.86 0.467 Y
normal working conditions. LHP 063E 04S
LHP 063E 05S
25.40
31.75
1.000
1.250
1.862
1.448
104.25 15.32
81.08 18.80
0.603
0.740
Y
Z
LHP 063E 06S
LHP 068E 01S 1.73 0.068 2758 400 25.002 55.12
38.10
9.53
1.500
0.375
1.185
10.126
66.34 22.25
567.03 7.06
0.876
0.278
Z
Y
Length when fully compressed.
LHP 068E 02S 12.70 0.500 6.649 372.31 8.94 0.352 Y
LHP 068E 03S 19.05 0.750 3.942 220.72 12.70 0.500 Y
LHP 068E 04S 25.40 1.000 2.801 156.85 16.46 0.648 Z
LHP 068E 05S 31.75 1.250 2.172 121.65 20.24 0.797 Z
LHP 068E 06S 38.10 1.500 1.774 99.35 24.00 0.945 BA
LHP 072E 01S 1.83 0.072 3447 500 31.239 68.87 9.53 0.375 13.947 780.97 7.29 0.287 Z
LHP 072E 02S 12.70 0.500 9.050 506.75 9.25 0.364 Z
LHP 072E 03S 19.05 0.750 5.316 297.70 13.18 0.519 BA
LHP 072E 04S 25.40 1.000 3.764 210.75 17.09 0.673 BA
LHP 072E 05S
LHP 072E 06S
31.75
38.10
1.250
1.500
2.913
2.376
163.11 21.01
133.04 24.94
0.827
0.982
BA
BB Spring Rate
LHP 085G 01S 12.19 0.480 12.70 0.500 6.35 0.250 2.16 0.085 2068 300 33.335 73.49 11.13 0.438 11.503 644.12 8.23 0.324 BC
LHP 085G 02S
LHP 085G 03S
12.70
19.05
0.500
0.750
9.342
5.315
523.10 9.14
297.63 12.78
0.360
0.503
BC
BC
change in load or force per
LHP 085G 04S 25.40 1.000 3.714 207.98 16.41 0.646 BD
LHP 085G 05S
LHP 085G 06S
31.75
38.10
1.250
1.500
2.854
2.318
159.84 20.07
129.79 23.70
0.790
0.933
BD
BE
unit of deflection
LHP 091G 01S 2.32 0.092 2758 400 44.412 97.91 11.13 0.438 17.408 974.79 8.59 0.338 BC
LHP 091G 02S 12.70 0.500 14.003 784.13 9.53 0.375 BC
LHP 091G 03S 19.05 0.750 7.829 438.40 13.39 0.527 BD
LHP 091G 04S 25.40 1.000 5.433 304.25 17.22 0.678 BD
LHP 091G 05S 31.75 1.250 4.160 232.96 21.06 0.829 BE
LHP 091G 06S 38.10 1.500 3.371 188.74 24.89 0.980 BE
Spring Rate and Approx. load at Solid Height are pre-calculated for Type 17-7 PH Stainless Steel.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 109
ADDITIONAL INFORMATION load; S is the spring rate; ∆ L is the deflection from free length).
1 The new Lee Spring High Pressure series is offered so that, for The surface area over the nominal hole diameter would be x times
a given length and outside diameter, there is a series of springs the diameter squared divided by 4.
that has higher spring rates or workable load ratings than in the
5 The resultant pressure would then be determined by dividing the
standard series.
calculated load by the surface area.
4 To find the load at any working length, when free length and page 207
spring rate are given, use the formula F = S x ∆ L (where F is the
108 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
COMPRESSION SPRINGS: HIGH PRESSURE SERIES
Spring Rate and Approx. load at Solid Height are pre-calculated for Type 17-7 PH Stainless Steel.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 109
COMPRESSION SPRINGS: HIGH PRESSURE SERIES
Spring Rate and Approx. load at Solid Height are pre-calculated for Type 17-7 PH Stainless Steel.
110 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
COMPRESSION SPRINGS: HIGH PRESSURE SERIES
Spring Rate and Approx. load at Solid Height are pre-calculated for Type 17-7 PH Stainless Steel.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 111
Global flexibility:
What you need.
When you need it.
Where you need it.
Our expanding global presence and in-depth
knowledge of the worldwide market
place puts Lee Spring at the leading
edge of market specific solutions
for customer needs. Lee Spring
partners with you to find a
resolution that meets local,
regional and geographical
requirements.
Serving Industries
Worldwide
Our products serve a broad base of
international industries including:
• Aerospace
• Oil and Gas
• Transportation
• Valves and Pumps
• Robotics and Automation
• Instrumentation and Controls
• Industrial and Manufacturing Equipment
• Computer and Telecommunications
• Pharmaceutical Delivery Systems
• Medical, Dental and Veterinary Devices
• Sporting Goods and Toys
• Stamping and Machining
• Tools and Hardware
• Defence and Munitions
112 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
DIE SPRINGS
Guide to using tables
Outside Diameter
Maximum Rod Diameter Nominal Wire Diameter
arranged through the pages
over which the spring will of the spring.
in ascending order of size
effectively operate.
Nominal Free Length
the overall length of the spring
in the unloaded position.
DIE SPRINGS
Lee Stock Number Medium Load – Grey Price Group
ordering reference. ● Ideal Operating Range 25% to 35% of Free Length ● Music Wire (MW), Chrome Silicon (CS)
LEE TO WORK TO WORK NOMINAL NOMINAL NOMINAL LOAD AT 50% APPROX. APPROX.
reference to the price list.
MATERIAL NOMINAL PRICE
STOCK IN HOLE OVER ROD OUTSIDE WIRE FREE DEFLECTION SOLID NO. OF
RATE GROUP
NUMBER DIA. MIN DIAMETER DIAMETER DIAMETER LENGTH (see footnote) HEIGHT COILS
MM IN MM IN MM IN MM IN MM IN N/MM LB/IN N LB MM IN
LHL 375A 01 MW 9.53 0.375 4.76 0.188 8.74 0.344 1.32 0.052 25.40 1.00 9.82 56.0 125 28.0 12.6 0.50 9.5 AA Number of Coils
LHL 375A 02 8.48 0.334 1.32 0.052 31.75 1.25 8.41 48.0 134 30.0 15.6 0.62 11.8 AA
LHL 375A 03
LHL 375A 04
8.61
8.41
0.339
0.331
1.32
1.32
0.052
0.052
38.10
44.45
1.50
1.75
6.66
5.96
38.0
34.0
127
132
28.5
29.8
18.2
21.6
0.72
0.85
13.8
16.3
AA
AA total coils in each spring.
LHL 375A 05 8.61 0.339 1.32 0.052 50.80 2.00 4.91 28.0 125 28.0 23.7 0.94 18.0 AB
LHL 375A 06 8.31 0.327 1.32 0.052 63.50 2.50 4.21 24.0 134 30.0 30.5 1.20 23.1 AB
LHL 375A 07 8.53 0.336 1.32 0.052 76.20 3.00 3.16 18.0 120 27.0 36.2 1.43 27.4 AC
LHL 375A 08
LHL 500A 01 MW 12.70 0.500 7.14 0.281
8.38
12.19
0.330
0.480
1.32
1.78
0.052
0.070
152.40
25.40
6.00
1.00
1.67
17.53
9.5
100.0
127
223
28.5
50.0
71.0
12.4
2.80
0.49
53.8
7.0
AE
AA
Solid Height
LHL 500A 02 11.96 0.471 1.83 0.072 31.75 1.25 16.13 92.0 256 57.5 15.7 0.62 8.6 AA
LHL 500A 03 11.81 0.465 1.83 0.072 38.10 1.50 13.32 76.0 254 57.0 19.1 0.75 10.4 AA length when
LHL 500A 04 11.58 0.456 1.83 0.072 44.45 1.75 11.92 68.0 265 59.5 22.1 0.87 12.1 AA
LHL 500A 05 12.01 0.473 1.91 0.075 50.80 2.00 11.22 64.0 285 64.0 25.3 1.00 13.3 AB
fully compressed
Material LHL 500A 06
LHL 500A 07
11.86
12.07
0.467
0.475
1.91
1.91
0.075
0.075
63.50
76.20
2.50
3.00
9.12
7.01
52.0
40.0
289
267
65.0
60.0
31.5
37.8
1.24
1.49
16.5
19.9
AB
AC
LHL 500A 08 11.84 0.466 1.83 0.072 88.90 3.50 5.26 30.0 234 52.5 42.4 1.67 23.2 AC
MW = Music Wire or LHL 500A 09 12.14 0.478 1.91 0.075 114.30 4.50 4.38 25.0 250 56.3 56.8 2.24 29.8 AD
LHL 500A 10 12.01 0.473 1.91 0.075 139.70 5.50 3.68 21.0 257 57.8 69.2 2.73 36.3 AE Load at % Deflection
CS =Chrome Silicon. LHL 500A 11 11.63 0.458 1.83 0.072 165.10 6.50 2.80 16.0 232 52.0 80.6 3.18 44.1 AF
LHL 500A 12
LHL 625A 01 MW 15.88 0.625 8.73 0.344
11.84
14.76
0.466
0.581
1.78
2.08
0.070
0.082
190.50
25.40
7.50
1.00
1.93
22.96
11.0
131.0
184
292
41.3
65.5
93.5
12.6
3.68
0.50
52.6
6.0
AG
AB
the load required to deflect
LHL 625A 02 14.94 0.588 2.21 0.087 31.75 1.25 22.44 128.0 356 80.0 15.7 0.62 7.1 AB
LHL 625A 03 14.66 0.577 2.21 0.087 38.10 1.50 18.93 108.0 361 81.0 18.8 0.74 8.5 AB the spring to a point
LHL 625A 04 14.27 0.562 2.21 0.087 44.45 1.75 16.83 96.0 374 84.0 22.1 0.87 10.0 AB
LHL 625A 05 14.78 0.582 2.29 0.090 50.80 2.00 15.43 88.0 392 88.0 25.1 0.99 11.0 AC
expressed as a percentage
Minimum Hole Diameter LHL 625A 06
LHL 625A 07
14.53
14.68
0.572
0.578
2.21
2.29
0.087
0.090
63.50
76.20
2.50
3.00
10.52
9.82
60.0
56.0
334
374
75.0
84.0
31.1
37.8
1.23
1.49
14.1
16.6
AC
AD
LHL 625A 08 14.61 0.575 2.29 0.090 88.90 3.50 8.41 48.0 374 84.0 44.2 1.74 19.3 AD of its free length.
required for the effective LHL 625A 09 14.35 0.565 2.29 0.090 101.60 4.00 7.71 44.0 392 88.0 50.4 1.99 22.1 AE
LHL 625A 10 14.61 0.575 2.29 0.090 152.40 6.00 4.91 28.0 374 84.0 72.4 2.85 31.7 AF
LHL 750A 01 MW 19.05 0.750 9.52 0.375 18.29 0.720 2.41 0.095 25.40 1.00 28.05 160.0 356 80.0 12.2 0.48 5.1 AD
operation of the spring. LHL 750A 02 18.42 0.725 2.49 0.098 31.75 1.25 22.79 130.0 362 81.3 15.4 0.61 6.2 AD
LHL 750A 03 18.42 0.725 2.54 0.100 38.10 1.50 20.16 115.0 384 86.3 18.3 0.72 7.2 AD Nominal Rate
LHL 750A 04 18.29 0.720 2.54 0.100 44.45 1.75 17.53 100.0 390 87.5 20.6 0.81 8.1 AD
LHL 750A 05 18.29 0.720 2.59 0.102 50.80 2.00 15.78 90.0 401 90.0 24.4 0.96 9.4 AE
LHL 750A 06 18.29 0.720 2.59 0.102 63.50 2.50 12.27 70.0 390 87.5 29.7 1.17 11.5 AE change in load or force per
LHL 750A 07 18.29 0.720 2.59 0.102 76.20 3.00 10.52 60.0 401 90.0 33.8 1.33 13.0 AF
LHL 750A 08
LHL 750A 09
18.36
18.36
0.723
0.723
2.67
2.67
0.105
0.105
88.90
101.60
3.50
4.00
9.64
8.76
55.0
50.0
429
445
96.3
100.0
41.4
45.1
1.63
1.78
15.5
16.9
AF
AG
unit of deflection.
LHL 750A 10 18.16 0.715 2.67 0.105 114.30 4.50 7.89 45.0 451 101.3 51.2 2.02 19.2 AG
LHL 750A 11 18.03 0.710 2.67 0.105 127.00 5.00 7.01 40.0 445 100.0 58.2 2.29 21.8 AH
LHL 750A 12 18.03 0.710 2.67 0.105 139.70 5.50 6.14 35.0 429 96.3 65.8 2.59 24.7 AH
LHL 750A 13 18.03 0.710 2.67 0.105 152.40 6.00 5.61 32.0 434 97.5 70.4 2.77 26.4 AJ
112 Deflection is expressed as a percentage of free length, with the approximate load required to attain that position.
Additional Information
1 Determine if the springs are to be used for low stress, medium stress or high stress applications, and refer to
the relevant section, i.e. Medium Load, Heavy Load etc.
2 The more rapidly the springs are cycled, the greater the need to ensure operation is within the ideal operating
ranges detailed at the head of each page.
3 Ensure that the hole diameter and/or the rod diameter suitably match your application as faulty spring guidance
will cause buckling and possible failure of the springs and risk damage to the die itself. Use as many springs in
the die as space permits, with the least amount of deflection.
4 Preventative maintenance of dies should be performed on a regular basis and die springs should be replaced at
appropriate intervals to reduce downtime. Replace all springs in a die at the same time. This will ensure an even
distribution of the applied load.
Deflection is expressed as a percentage of free length, with the approximate load required to attain that position. 113
DIE SPRINGS
Medium Load – Grey
● Ideal Operating Range 25% to 35% of Free Length ● Music Wire (MW), Chrome Silicon (CS)
LEE TO WORK TO WORK NOMINAL NOMINAL NOMINAL LOAD AT 50% APPROX. APPROX.
MATERIAL NOMINAL PRICE
STOCK IN HOLE OVER ROD OUTSIDE WIRE FREE DEFLECTION SOLID NO. OF
RATE GROUP
NUMBER DIA. MIN DIAMETER DIAMETER DIAMETER LENGTH (see footnote) HEIGHT COILS
MM IN MM IN MM IN MM IN MM IN N/MM LB/IN N LB MM IN
LHL 375A 01 MW 9.53 0.375 4.76 0.188 8.74 0.344 1.32 0.052 25.40 1.00 9.82 56.0 125 28.0 12.6 0.50 9.5 AA
LHL 375A 02 8.48 0.334 1.32 0.052 31.75 1.25 8.41 48.0 134 30.0 15.6 0.62 11.8 AA
LHL 375A 03 8.61 0.339 1.32 0.052 38.10 1.50 6.66 38.0 127 28.5 18.2 0.72 13.8 AA
LHL 375A 04 8.41 0.331 1.32 0.052 44.45 1.75 5.96 34.0 132 29.8 21.6 0.85 16.3 AA
LHL 375A 05 8.61 0.339 1.32 0.052 50.80 2.00 4.91 28.0 125 28.0 23.7 0.94 18.0 AB
LHL 375A 06 8.31 0.327 1.32 0.052 63.50 2.50 4.21 24.0 134 30.0 30.5 1.20 23.1 AB
LHL 375A 07 8.53 0.336 1.32 0.052 76.20 3.00 3.16 18.0 120 27.0 36.2 1.43 27.4 AC
LHL 375A 08 8.38 0.330 1.32 0.052 152.40 6.00 1.67 9.5 127 28.5 71.0 2.80 53.8 AE
LHL 500A 01 MW 12.70 0.500 7.14 0.281 12.19 0.480 1.78 0.070 25.40 1.00 17.53 100.0 223 50.0 12.4 0.49 7.0 AA
LHL 500A 02 11.96 0.471 1.83 0.072 31.75 1.25 16.13 92.0 256 57.5 15.7 0.62 8.6 AA
LHL 500A 03 11.81 0.465 1.83 0.072 38.10 1.50 13.32 76.0 254 57.0 19.1 0.75 10.4 AA
LHL 500A 04 11.58 0.456 1.83 0.072 44.45 1.75 11.92 68.0 265 59.5 22.1 0.87 12.1 AA
LHL 500A 05 12.01 0.473 1.91 0.075 50.80 2.00 11.22 64.0 285 64.0 25.3 1.00 13.3 AB
LHL 500A 06 11.86 0.467 1.91 0.075 63.50 2.50 9.12 52.0 289 65.0 31.5 1.24 16.5 AB
LHL 500A 07 12.07 0.475 1.91 0.075 76.20 3.00 7.01 40.0 267 60.0 37.8 1.49 19.9 AC
LHL 500A 08 11.84 0.466 1.83 0.072 88.90 3.50 5.26 30.0 234 52.5 42.4 1.67 23.2 AC
LHL 500A 09 12.14 0.478 1.91 0.075 114.30 4.50 4.38 25.0 250 56.3 56.8 2.24 29.8 AE
LHL 500A 10 12.01 0.473 1.91 0.075 139.70 5.50 3.68 21.0 257 57.8 69.2 2.73 36.3 AG
LHL 500A 11 11.63 0.458 1.83 0.072 165.10 6.50 2.80 16.0 232 52.0 80.6 3.18 44.1 AG
LHL 500A 12 11.84 0.466 1.78 0.070 190.50 7.50 1.93 11.0 184 41.3 93.5 3.68 52.6 AG
LHL 625A 01 MW 15.88 0.625 8.73 0.344 14.76 0.581 2.08 0.082 25.40 1.00 22.96 131.0 292 65.5 12.6 0.50 6.0 AB
LHL 625A 02 14.94 0.588 2.21 0.087 31.75 1.25 22.44 128.0 356 80.0 15.7 0.62 7.1 AB
LHL 625A 03 14.66 0.577 2.21 0.087 38.10 1.50 18.93 108.0 361 81.0 18.8 0.74 8.5 AB
LHL 625A 04 14.27 0.562 2.21 0.087 44.45 1.75 16.83 96.0 374 84.0 22.1 0.87 10.0 AB
LHL 625A 05 14.78 0.582 2.29 0.090 50.80 2.00 15.43 88.0 392 88.0 25.1 0.99 11.0 AC
LHL 625A 06 14.53 0.572 2.21 0.087 63.50 2.50 10.52 60.0 334 75.0 31.1 1.23 14.1 AC
LHL 625A 07 14.68 0.578 2.29 0.090 76.20 3.00 9.82 56.0 374 84.0 37.8 1.49 16.6 AD
LHL 625A 08 14.61 0.575 2.29 0.090 88.90 3.50 8.41 48.0 374 84.0 44.2 1.74 19.3 AD
LHL 625A 09 14.35 0.565 2.29 0.090 101.60 4.00 7.71 44.0 392 88.0 50.4 1.99 22.1 AE
LHL 625A 10 14.61 0.575 2.29 0.090 152.40 6.00 4.91 28.0 374 84.0 72.4 2.85 31.7 AF
LHL 625A 14 14.68 0.578 2.29 0.090 304.80 12.00 2.54 14.5 387 87.0 145.1 5.71 60.4 AJ
LHL 750A 01 MW 19.05 0.750 9.52 0.375 18.29 0.720 2.41 0.095 25.40 1.00 28.05 160.0 356 80.0 12.2 0.48 5.1 AD
LHL 750A 02 18.42 0.725 2.49 0.098 31.75 1.25 22.79 130.0 362 81.3 15.4 0.61 6.2 AD
LHL 750A 03 18.42 0.725 2.54 0.100 38.10 1.50 20.16 115.0 384 86.3 18.3 0.72 7.2 AD
LHL 750A 04 18.29 0.720 2.54 0.100 44.45 1.75 17.53 100.0 390 87.5 20.6 0.81 8.1 AD
LHL 750A 05 18.29 0.720 2.59 0.102 50.80 2.00 15.78 90.0 401 90.0 24.4 0.96 9.4 AE
LHL 750A 06 18.29 0.720 2.59 0.102 63.50 2.50 12.27 70.0 390 87.5 29.7 1.17 11.5 AE
LHL 750A 07 18.29 0.720 2.59 0.102 76.20 3.00 10.52 60.0 401 90.0 33.8 1.33 13.0 AF
LHL 750A 08 18.36 0.723 2.67 0.105 88.90 3.50 9.64 55.0 429 96.3 41.4 1.63 15.5 AF
LHL 750A 09 18.36 0.723 2.67 0.105 101.60 4.00 8.76 50.0 445 100.0 45.1 1.78 16.9 AG
LHL 750A 10 18.16 0.715 2.67 0.105 114.30 4.50 7.89 45.0 451 101.3 51.2 2.02 19.2 AG
LHL 750A 11 18.03 0.710 2.67 0.105 127.00 5.00 7.01 40.0 445 100.0 58.2 2.29 21.8 AH
LHL 750A 12 18.03 0.710 2.67 0.105 139.70 5.50 6.14 35.0 429 96.3 65.8 2.59 24.7 AH
LHL 750A 13 18.03 0.710 2.67 0.105 152.40 6.00 5.61 32.0 434 97.5 70.4 2.77 26.4 AJ
LHL 750A 13A 18.03 0.710 2.67 0.105 165.10 6.50 5.17 29.5 426 95.9 78.2 3.08 28.8 AR
LHL 750A 17 18.03 0.710 2.67 0.105 304.80 12.00 2.78 15.9 424 95.4 144.0 5.67 51.6 AR
114 Deflection is expressed as a percentage of free length, with the approximate load required to attain that position.
DIE SPRINGS
Medium Load – Grey
● Ideal Operating Range 25% to 35% of Free Length ● Music Wire (MW), Chrome Silicon (CS)
LEE TO WORK TO WORK NOMINAL NOMINAL NOMINAL LOAD AT 50% APPROX. APPROX.
MATERIAL NOMINAL PRICE
STOCK IN HOLE OVER ROD OUTSIDE WIRE FREE DEFLECTION SOLID NO. OF
RATE GROUP
NUMBER DIA. MIN DIAMETER DIAMETER DIAMETER LENGTH (see footnote) HEIGHT COILS
MM IN MM IN MM IN MM IN MM IN N/MM LB/IN N LB MM IN
LHL 1000A 01 CS 25.40 1.000 12.70 0.500 24.38 0.960 3.18 0.125 25.40 1.00 47.33 270.0 601 135.0 12.7 0.50 4.0 AF
LHL 1000A 02 24.51 0.965 3.25 0.128 31.75 1.25 39.44 225.0 626 140.6 15.9 0.63 4.9 AF
LHL 1000A 03 24.51 0.965 3.25 0.128 38.10 1.50 31.55 180.0 601 135.0 18.7 0.74 5.7 AF
LHL 1000A 04 24.13 0.950 3.25 0.128 44.45 1.75 27.17 155.0 604 135.6 21.2 0.84 6.5 AF
LHL 1000A 05 23.88 0.940 3.25 0.128 50.80 2.00 23.66 135.0 601 135.0 24.0 0.95 7.4 AG
LHL 1000A 06 24.51 0.965 3.43 0.135 63.50 2.50 21.03 120.0 668 150.0 30.9 1.22 9.0 AG
LHL 1000A 07 24.38 0.960 3.43 0.135 76.20 3.00 17.53 100.0 668 150.0 36.3 1.43 10.6 AH
LHL 1000A 08 24.38 0.960 3.43 0.135 88.90 3.50 14.90 85.0 662 148.8 41.4 1.63 12.1 AH
LHL 1000A 09 24.38 0.960 3.43 0.135 101.60 4.00 13.15 75.0 668 150.0 46.0 1.81 13.4 AJ
LHL 1000A 10 23.88 0.940 3.43 0.135 114.30 4.50 12.27 70.0 701 157.5 52.1 2.05 15.2 AJ
LHL 1000A 11 23.88 0.940 3.43 0.135 127.00 5.00 10.87 62.0 696 156.3 57.4 2.26 16.7 AK
LHL 1000A 12 23.88 0.940 3.43 0.135 139.70 5.50 9.64 55.0 673 151.3 64.1 2.53 18.7 AK
LHL 1000A 13 23.88 0.940 3.43 0.135 152.40 6.00 8.76 50.0 668 150.0 70.0 2.76 20.4 AL
LHL 1000A 14 23.88 0.940 3.43 0.135 177.80 7.00 7.44 42.5 662 148.8 83.8 3.30 23.5 AM
LHL 1250A 01 CS 31.75 1.250 15.88 0.625 30.48 1.200 3.96 0.156 38.10 1.50 47.33 270.0 902 202.5 18.9 0.75 4.8 AJ
LHL 1250A 02 30.48 1.200 3.96 0.156 44.45 1.75 38.56 220.0 857 192.5 21.6 0.85 5.4 AJ
LHL 1250A 03 30.48 1.200 3.96 0.156 50.80 2.00 33.30 190.0 846 190.0 23.7 0.94 6.0 AK
LHL 1250A 04 30.48 1.200 4.11 0.162 63.50 2.50 29.80 170.0 946 212.5 29.8 1.18 7.3 AK
LHL 1250A 05 30.86 1.215 4.32 0.170 76.20 3.00 27.52 157.0 1,052 236.3 37.6 1.48 8.7 AL
LHL 1250A 06 30.48 1.200 4.32 0.170 88.90 3.50 24.54 140.0 1,091 245.0 42.8 1.69 9.9 AL
LHL 1250A 07 30.48 1.200 4.32 0.170 101.60 4.00 21.03 120.0 1,069 240.0 48.4 1.91 11.2 AM
LHL 1250A 08 29.97 1.180 4.32 0.170 114.30 4.50 19.28 110.0 1,102 247.5 54.6 2.15 12.6 AM
LHL 1250A 09 29.72 1.170 4.32 0.170 127.00 5.00 17.53 100.0 1,113 250.0 60.7 2.39 14.1 AN
LHL 1250A 10 29.72 1.170 4.32 0.170 139.70 5.50 15.78 90.0 1,102 247.5 66.5 2.62 15.4 AN
LHL 1250A 11 29.72 1.170 4.32 0.170 152.40 6.00 14.37 82.0 1,094 246.0 71.8 2.83 16.6 AP
LHL 1250A 12 29.72 1.170 4.32 0.170 177.80 7.00 12.22 69.8 1,087 244.3 82.9 3.26 19.2 AQ
LHL 1500A 01 CS 38.10 1.500 19.05 0.750 36.32 1.430 4.75 0.187 50.80 2.00 49.08 280.0 1,247 280.0 25.1 0.99 5.3 AL
LHL 1500A 02 36.32 1.430 4.88 0.192 63.50 2.50 42.07 240.0 1,336 300.0 30.9 1.22 6.3 AL
LHL 1500A 03 35.31 1.390 4.95 0.195 76.20 3.00 38.56 220.0 1,469 330.0 37.5 1.48 7.6 AM
LHL 1500A 04 34.54 1.360 4.95 0.195 88.90 3.50 34.18 195.0 1,519 341.3 43.6 1.72 8.8 AM
LHL 1500A 05 36.83 1.450 5.26 0.207 101.60 4.00 32.43 185.0 1,647 370.0 49.8 1.96 9.5 AN
LHL 1500A 06 36.83 1.450 5.26 0.207 114.30 4.50 28.05 160.0 1,603 360.0 56.0 2.21 10.7 AN
LHL 1500A 07 36.32 1.430 5.26 0.207 127.00 5.00 26.29 150.0 1,670 375.0 61.3 2.42 11.7 AP
LHL 1500A 08 35.81 1.410 5.26 0.207 139.70 5.50 24.54 140.0 1,714 385.0 67.8 2.67 12.9 AP
LHL 1500A 09 35.18 1.385 5.26 0.207 152.40 6.00 23.14 132.0 1,770 397.5 74.9 2.95 14.3 AQ
LHL 1500A 10 35.18 1.385 5.26 0.207 177.80 7.00 20.14 115.0 1,790 402.5 84.3 3.32 16.0 AR
LHL 2000A 01 CS 50.80 2.000 25.40 1.000 49.28 1.940 6.65 0.262 63.50 2.50 78.88 450.0 2,504 562.5 31.8 1.25 4.8 AP
LHL 2000A 02 47.75 1.880 6.65 0.262 76.20 3.00 70.12 400.0 2,671 600.0 38.1 1.50 5.7 AQ
LHL 2000A 03 47.24 1.860 6.65 0.262 88.90 3.50 59.60 340.0 2,649 595.0 43.6 1.72 6.5 AQ
LHL 2000A 04 46.74 1.840 6.65 0.262 101.60 4.00 52.59 300.0 2,671 600.0 50.0 1.97 7.5 AR
LHL 2000A 05 46.74 1.840 6.65 0.262 114.30 4.50 46.45 265.0 2,655 596.3 55.1 2.17 8.3 AR
LHL 2000A 06 46.48 1.830 6.65 0.262 127.00 5.00 41.19 235.0 2,616 587.5 61.0 2.40 9.2 AS
LHL 2000A 07 46.48 1.830 6.65 0.262 139.70 5.50 37.69 215.0 2,632 591.3 68.1 2.68 10.2 AS
LHL 2000A 08 45.59 1.795 6.65 0.262 152.40 6.00 35.93 205.0 2,738 615.0 74.7 2.94 11.2 AT
LHL 2000A 09 45.59 1.795 6.65 0.262 177.80 7.00 30.74 175.5 2,732 614.3 84.6 3.33 12.7 AW
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 115
DIE SPRINGS
Medium Load Plus – Beige
● Ideal Operating Range 25% to 35% of Free Length ● Music Wire (MW), Chrome Silicon (CS)
LEE TO WORK TO WORK NOMINAL NOMINAL NOMINAL LOAD AT 37% APPROX. APPROX.
MATERIAL NOMINAL PRICE
STOCK IN HOLE OVER ROD OUTSIDE WIRE FREE DEFLECTION SOLID NO. OF
RATE GROUP
NUMBER DIA. MIN DIAMETER DIAMETER DIAMETER LENGTH (see footnote) HEIGHT COILS
MM IN MM IN MM IN MM IN MM IN N/mm
LB/IN N LB MM IN
LHL 375AB 01 MW 9.53 0.375 4.76 0.188 8.64 0.340 1.40 0.055 25.40 1.00 12.80 73.0 120 27.0 14.6 0.57 10.4 AA
LHL 375AB 02 8.64 0.340 1.40 0.055 31.75 1.25 10.52 60.0 124 27.8 17.1 0.67 12.3 AA
LHL 375AB 03 8.64 0.340 1.40 0.055 38.10 1.50 9.12 52.0 128 28.9 19.3 0.76 13.8 AA
LHL 375AB 04 8.64 0.340 1.40 0.055 44.45 1.75 8.06 46.0 133 29.8 21.4 0.84 15.3 AA
LHL 375AB 05 8.64 0.340 1.45 0.057 50.80 2.00 6.84 39.0 128 28.9 29.7 1.17 20.5 AB
LHL 375AB 06 8.64 0.340 1.45 0.057 63.50 2.50 5.78 33.0 136 30.5 34.6 1.36 23.9 AB
LHL 375AB 07 8.64 0.340 1.45 0.057 76.21 3.00 4.21 24.0 119 26.6 46.4 1.83 32.0 AC
LHL 375AB 08 8.64 0.340 1.45 0.057 152.40 6.00 2.28 13.0 128 28.9 86.3 3.40 59.6 AE
LHL 500AB 01 MW 12.70 0.500 7.14 0.281 12.07 0.475 1.91 0.075 25.40 1.00 23.49 134.0 221 49.6 14.8 0.58 7.8 AB
LHL 500AB 02 12.07 0.475 1.91 0.075 31.75 1.25 18.93 108.0 222 50.0 17.4 0.69 9.1 AB
LHL 500AB 03 12.07 0.475 1.98 0.078 38.10 1.50 17.18 98.0 242 54.4 22.6 0.89 11.4 AB
LHL 500AB 04 12.07 0.475 1.98 0.078 44.45 1.75 15.07 86.0 248 55.7 25.4 1.00 12.8 AB
LHL 500AB 05 12.07 0.475 1.98 0.078 50.80 2.00 13.32 76.0 250 56.2 28.0 1.10 14.1 AC
LHL 500AB 06 12.07 0.475 1.98 0.078 63.50 2.50 10.52 60.0 247 55.5 34.3 1.35 17.3 AC
LHL 500AB 07 12.07 0.475 1.98 0.078 76.20 3.00 8.41 48.0 237 53.3 41.9 1.65 21.1 AD
LHL 500AB 08 12.07 0.475 1.98 0.078 88.90 3.50 6.66 38.0 219 49.2 52.3 2.06 26.4 AD
LHL 500AB 09 12.07 0.475 1.98 0.078 152.40 6.00 3.51 20.0 198 44.4 94.6 3.73 47.8 AF
LHL 625AB 01 MW 15.88 0.625 8.73 0.344 14.76 0.581 2.31 0.091 25.40 1.00 34.18 195.0 321 72.2 15.5 0.61 6.7 AC
LHL 625AB 02 14.86 0.585 2.36 0.093 31.75 1.25 29.45 168.0 346 77.7 18.6 0.73 7.9 AC
LHL 625AB 03 14.73 0.580 2.41 0.095 38.10 1.50 26.12 149.0 368 82.7 23.0 0.91 9.5 AC
LHL 625AB 04 14.48 0.570 2.41 0.095 44.45 1.75 22.44 128.0 369 82.9 27.1 1.07 11.2 AC
LHL 625AB 05 14.99 0.590 2.49 0.098 50.80 2.00 20.68 118.0 389 87.3 30.4 1.20 12.2 AD
LHL 625AB 06 14.99 0.590 2.49 0.098 63.50 2.50 15.43 88.0 362 81.4 39.0 1.54 15.7 AD
LHL 625AB 07 14.99 0.590 2.49 0.098 76.20 3.00 13.67 78.0 385 86.6 43.3 1.71 17.4 AE
LHL 625AB 08 14.73 0.580 2.49 0.098 88.90 3.50 11.74 67.0 386 86.8 52.8 2.08 21.2 AE
LHL 625AB 09 14.73 0.580 2.49 0.098 101.60 4.00 10.52 60.0 395 88.8 57.9 2.28 23.3 AF
LHL 625AB 10 14.73 0.580 2.54 0.100 152.40 6.00 6.84 39.0 385 86.6 96.2 3.79 37.9 AH
LHL 750AB 01 MW 19.05 0.750 9.52 0.375 18.42 0.725 2.84 0.112 25.40 1.00 47.85 273.0 450 101.0 16.4 0.65 5.8 AE
LHL 750AB 02 18.29 0.720 2.92 0.115 31.75 1.25 42.07 240.0 494 111.0 20.2 0.80 6.9 AE
LHL 750AB 03 18.29 0.720 2.92 0.115 38.10 1.50 33.83 193.0 477 107.1 23.7 0.93 8.1 AE
LHL 750AB 04 17.65 0.695 2.92 0.115 44.45 1.75 31.73 181.0 522 117.2 27.4 1.08 9.4 AE
LHL 750AB 05 17.27 0.680 2.92 0.115 50.80 2.00 28.40 162.0 534 119.9 31.9 1.26 10.9 AF
LHL 750AB 06 17.40 0.685 2.92 0.115 63.50 2.50 21.56 123.0 507 113.8 39.2 1.54 13.4 AF
LHL 750AB 07 17.78 0.700 2.92 0.115 76.20 3.00 17.88 102.0 504 113.2 44.7 1.76 15.3 AG
LHL 750AB 08 17.78 0.700 2.92 0.115 88.90 3.50 15.78 90.0 519 116.6 47.9 1.89 16.4 AG
LHL 750AB 09 17.53 0.690 3.00 0.118 101.60 4.00 14.90 85.0 560 125.8 65.7 2.59 21.9 AH
LHL 750AB 10 17.27 0.680 3.00 0.118 114.30 4.50 12.80 73.0 541 121.6 72.0 2.84 24.0 AH
LHL 750AB 11 17.02 0.670 3.00 0.118 127.00 5.00 11.74 67.0 552 124.0 81.6 3.21 27.2 AJ
LHL 750AB 12 17.02 0.670 3.00 0.118 139.70 5.50 10.69 61.0 553 124.1 89.5 3.52 29.9 AJ
LHL 750AB 13 17.27 0.680 3.00 0.118 152.40 6.00 9.82 56.0 554 124.3 96.5 3.80 32.2 AK
116 Deflection is expressed as a percentage of free length, with the approximate load required to attain that position.
DIE SPRINGS
Medium Load Plus – Beige
● Ideal Operating Range 25% to 35% of Free Length ● Music Wire (MW), Chrome Silicon (CS)
LEE TO WORK TO WORK NOMINAL NOMINAL NOMINAL LOAD AT 37% APPROX. APPROX.
MATERIAL NOMINAL PRICE
STOCK IN HOLE OVER ROD OUTSIDE WIRE FREE DEFLECTION SOLID NO. OF
RATE GROUP
NUMBER DIA. MIN DIAMETER DIAMETER DIAMETER LENGTH (see footnote) HEIGHT COILS
MM IN MM IN MM IN MM IN MM IN N/mm
LB/IN N LB MM IN
LHL 1000AB 01 CS 25.40 1.000 12.70 0.500 24.51 0.965 3.61 0.142 25.40 1.00 75.90 433.0 713 160.2 16.1 0.63 4.5 AG
LHL 1000AB 02 23.75 0.935 3.61 0.142 31.75 1.25 64.16 366.0 754 169.3 19.3 0.76 5.4 AG
LHL 1000AB 03 22.86 0.900 3.66 0.144 38.10 1.50 57.67 329.0 813 182.6 23.9 0.94 6.5 AG
LHL 1000AB 04 23.75 0.935 3.76 0.148 44.45 1.75 51.18 292.0 842 189.1 26.5 1.04 7.0 AG
LHL 1000AB 05 23.75 0.935 3.76 0.148 50.80 2.00 44.00 251.0 827 185.7 29.6 1.16 7.9 AH
LHL 1000AB 06 23.50 0.925 3.76 0.148 63.50 2.50 35.76 204.0 840 188.7 35.7 1.40 9.5 AH
LHL 1000AB 07 23.50 0.925 3.76 0.148 76.20 3.00 29.10 166.0 820 184.3 42.0 1.66 11.2 AJ
LHL 1000AB 08 22.86 0.900 3.76 0.148 88.90 3.50 26.29 150.0 865 194.3 49.6 1.95 13.2 AJ
LHL 1000AB 09 24.13 0.950 3.96 0.156 101.60 4.00 22.79 130.0 857 192.4 61.6 2.42 15.5 AK
LHL 1000AB 10 24.64 0.970 3.96 0.156 114.30 4.50 19.46 111.0 823 184.6 66.2 2.61 16.7 AK
LHL 1000AB 11 24.64 0.970 3.96 0.156 127.00 5.00 18.05 103.0 848 190.6 70.7 2.78 17.8 AL
LHL 1000AB 12 24.64 0.970 3.96 0.156 139.70 5.50 16.13 92.0 834 187.2 78.2 3.08 19.7 AL
LHL 1000AB 13 24.64 0.970 3.96 0.156 152.40 6.00 14.20 81.0 801 179.8 87.7 3.45 22.1 AM
LHL 1250AB 01 CS 31.75 1.250 15.88 0.625 30.48 1.200 4.57 0.180 38.10 1.50 82.04 468.0 1,156 259.7 23.7 0.93 5.2 AK
LHL 1250AB 02 30.23 1.190 4.57 0.180 44.45 1.75 70.82 404.0 1,165 261.6 26.5 1.04 5.8 AK
LHL 1250AB 03 29.72 1.170 4.57 0.180 50.80 2.00 62.93 359.0 1,183 265.7 29.8 1.18 6.5 AL
LHL 1250AB 04 29.97 1.180 4.75 0.187 63.50 2.50 55.74 318.0 1,310 294.2 37.4 1.47 7.9 AL
LHL 1250AB 05 29.72 1.170 4.88 0.192 76.20 3.00 50.31 287.0 1,418 318.6 46.5 1.83 9.5 AM
LHL 1250AB 06 29.72 1.170 4.88 0.192 88.90 3.50 43.30 247.0 1,424 319.9 52.6 2.07 10.8 AM
LHL 1250AB 07 29.72 1.170 4.88 0.192 101.60 4.00 37.86 216.0 1,423 319.7 58.6 2.31 12.0 AN
LHL 1250AB 08 29.46 1.160 4.88 0.192 114.30 4.50 34.01 194.0 1,428 323.0 65.4 2.58 13.4 AN
LHL 1250AB 09 29.21 1.150 4.88 0.192 127.00 5.00 30.85 176.0 1,450 325.6 73.6 2.90 15.1 AP
LHL 1250AB 10 29.46 1.160 4.88 0.192 139.70 5.50 27.52 157.0 1,423 319.5 79.0 3.11 16.2 AP
LHL 1250AB 11 29.46 1.160 4.88 0.192 152.40 6.00 25.24 144.0 1,423 319.7 85.2 3.35 17.5 AQ
LHL 1500AB 01 CS 38.10 1.500 19.05 0.750 36.58 1.440 5.54 0.218 50.80 2.00 89.75 512.0 1,687 378.9 31.2 1.23 5.6 AM
LHL 1500AB 02 36.58 1.440 5.54 0.218 63.50 2.50 67.31 384.0 1,581 355.2 37.8 1.49 6.8 AM
LHL 1500AB 03 36.58 1.440 5.72 0.225 76.20 3.00 61.53 351.0 1,735 389.6 46.2 1.82 8.1 AN
LHL 1500AB 04 36.58 1.440 5.94 0.234 88.90 3.50 63.28 361.0 2,081 467.5 53.9 2.12 9.1 AN
LHL 1500AB 05 36.58 1.440 5.94 0.234 101.60 4.00 51.71 295.0 1,944 436.6 63.2 2.49 10.6 AP
LHL 1500AB 06 36.58 1.440 5.94 0.234 114.30 4.50 45.05 257.0 1,905 427.9 70.7 2.79 11.9 AP
LHL 1500AB 07 36.58 1.440 5.94 0.234 127.00 5.00 43.82 250.0 2,059 462.5 72.4 2.85 12.2 AQ
LHL 1500AB 08 36.58 1.440 5.94 0.234 139.70 5.50 36.81 210.0 1,903 427.4 83.9 3.30 14.1 AQ
LHL 1500AB 09 36.58 1.440 5.94 0.234 152.40 6.00 35.06 200.0 1,977 444.0 87.4 3.44 14.7 AR
LHL 2000AB 01 CS 50.80 2.000 25.40 1.000 48.01 1.890 7.19 0.283 63.50 2.50 121.48 693.0 2,584 641.0 38.6 1.52 5.4 AQ
LHL 2000AB 02 46.99 1.850 7.19 0.283 76.20 3.00 103.07 588.0 2,906 652.7 45.0 1.77 6.3 AR
LHL 2000AB 03 45.72 1.800 7.19 0.283 88.90 3.50 90.62 517.0 2,981 669.5 52.7 2.07 7.3 AR
LHL 2000AB 04 45.47 1.790 7.19 0.283 101.60 4.00 79.58 454.0 2,992 671.9 58.7 2.31 8.2 AS
LHL 2000AB 05 44.70 1.760 7.19 0.283 114.30 4.50 71.87 410.0 3,039 682.7 66.4 2.62 9.2 AS
LHL 2000AB 06 43.94 1.730 7.19 0.283 127.00 5.00 65.56 374.0 3,081 691.9 75.0 2.95 10.4 AT
LHL 2000AB 07 43.69 1.720 7.19 0.283 139.70 5.50 60.12 343.0 3,108 698.0 82.0 3.23 11.4 AT
LHL 2000AB 08 43.18 1.700 7.19 0.283 152.40 6.00 55.39 316.0 3,123 701.5 90.7 3.57 12.6 AU
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 117
DIE SPRINGS
Medium Heavy Load – Purple
● Ideal Operating Range 20% to 25% of Free Length ● Music Wire (MW), Chrome Silicon (CS)
LEE TO WORK TO WORK NOMINAL NOMINAL NOMINAL LOAD AT 37% APPROX. APPROX.
MATERIAL NOMINAL PRICE
STOCK IN HOLE OVER ROD OUTSIDE WIRE FREE DEFLECTION SOLID NO. OF
RATE GROUP
NUMBER DIA. MIN DIAMETER DIAMETER DIAMETER LENGTH (see footnote) HEIGHT COILS
MM IN MM IN MM IN MM IN MM IN N/mm
LB/IN N LB MM IN
LHL 375B 01 MW 9.53 0.375 4.76 0.188 8.71 0.343 1.47 0.058 25.40 1.00 15.78 90.0 148 33.3 14.9 0.59 10.1 AA
LHL 375B 02 8.56 0.337 1.47 0.058 31.75 1.25 12.80 73.0 150 33.8 18.5 0.73 12.6 AA
LHL 375B 03 8.26 0.325 1.47 0.058 38.10 1.50 11.74 67.0 166 37.2 22.2 0.88 15.1 AA
LHL 375B 04 8.38 0.330 1.50 0.059 44.45 1.75 10.17 58.0 167 37.6 26.4 1.04 17.6 AA
LHL 375B 05 8.36 0.329 1.50 0.059 50.80 2.00 8.76 50.0 165 37.0 30.1 1.19 20.1 AB
LHL 375B 06 8.31 0.327 1.50 0.059 63.50 2.50 7.36 42.0 173 38.9 36.1 1.42 24.1 AB
LHL 375B 07 8.33 0.328 1.47 0.058 76.20 3.00 5.26 30.0 148 33.3 44.5 1.75 30.2 AC
LHL 375B 08 8.38 0.330 1.47 0.058 152.40 6.00 2.63 15.0 148 33.3 84.3 3.32 57.2 AE
LHL 500B 01 MW 12.70 0.500 7.14 0.281 11.71 0.461 1.98 0.078 25.40 1.00 29.45 168.0 277 62.2 15.4 0.61 7.8 AB
LHL 500B 02 11.84 0.466 2.03 0.080 31.75 1.25 24.37 139.0 286 64.3 19.4 0.77 9.6 AB
LHL 500B 03 11.56 0.455 2.03 0.080 38.10 1.50 21.03 120.0 297 66.6 23.4 0.92 11.5 AB
LHL 500B 04 11.68 0.460 2.03 0.080 44.45 1.75 18.23 104.0 300 67.3 25.7 1.01 12.6 AB
LHL 500B 05 11.71 0.461 2.03 0.080 50.80 2.00 15.25 87.0 287 64.4 29.7 1.17 14.6 AC
LHL 500B 06 11.71 0.461 2.03 0.080 63.50 2.50 11.92 68.0 280 62.9 36.8 1.45 18.1 AC
LHL 500B 07 11.71 0.461 2.03 0.080 76.20 3.00 9.99 57.0 282 63.3 42.9 1.69 21.1 AD
LHL 500B 08 11.71 0.461 2.03 0.080 88.90 3.50 8.24 47.0 271 60.9 51.3 2.02 25.3 AD
LHL 500B 09 11.71 0.461 2.03 0.080 152.40 6.00 4.73 27.0 267 59.9 86.4 3.40 42.5 AF
LHL 625B 01 MW 15.88 0.625 8.73 0.344 14.76 0.581 2.49 0.098 25.40 1.00 48.55 277.0 456 102.5 15.6 0.62 6.3 AC
LHL 625B 02 14.68 0.578 2.49 0.098 31.75 1.25 36.46 208.0 428 96.2 19.4 0.77 7.8 AC
LHL 625B 03 14.50 0.571 2.54 0.100 38.10 1.50 33.30 190.0 469 105.5 23.6 0.93 9.3 AC
LHL 625B 04 14.73 0.580 2.59 0.102 44.45 1.75 29.45 168.0 484 108.8 27.4 1.08 10.6 AC
LHL 625B 05 14.58 0.574 2.59 0.102 50.80 2.00 25.94 148.0 488 109.5 31.2 1.23 12.1 AD
LHL 625B 06 14.53 0.572 2.59 0.102 63.50 2.50 20.16 115.0 474 106.4 39.0 1.54 15.0 AD
LHL 625B 07 14.88 0.586 2.67 0.105 76.20 3.00 17.53 100.0 494 111.0 47.4 1.87 17.8 AE
LHL 625B 08 14.88 0.586 2.67 0.105 88.90 3.50 14.90 85.0 490 110.1 54.9 2.16 20.6 AE
LHL 625B 09 14.78 0.582 2.67 0.105 101.60 4.00 13.32 76.0 501 112.5 62.2 2.45 23.3 AF
LHL 625B 10 14.66 0.577 2.67 0.105 152.40 6.00 8.76 50.0 494 111.0 94.4 3.72 35.4 AH
LHL 750B 01 CS 19.05 0.750 9.52 0.375 18.03 0.710 3.05 0.120 25.40 1.00 78.88 450.0 741 166.5 16.0 0.63 5.3 AE
LHL 750B 02 18.42 0.725 3.18 0.125 31.75 1.25 67.49 385.0 793 178.1 19.8 0.78 6.2 AE
LHL 750B 03 18.16 0.715 3.18 0.125 38.10 1.50 56.09 320.0 791 177.6 23.5 0.93 7.4 AE
LHL 750B 04 17.65 0.695 3.18 0.125 44.45 1.75 50.48 288.0 830 186.5 27.4 1.08 8.6 AE
LHL 750B 05 17.53 0.690 3.18 0.125 50.80 2.00 43.47 248.0 817 183.5 31.5 1.24 9.9 AF
LHL 750B 06 17.53 0.690 3.18 0.125 63.50 2.50 33.66 192.0 791 177.6 38.7 1.53 12.2 AF
LHL 750B 07 18.03 0.710 3.18 0.125 76.20 3.00 25.24 144.0 712 159.8 45.2 1.78 14.2 AG
LHL 750B 08 17.78 0.700 3.18 0.125 88.90 3.50 22.44 128.0 738 165.8 52.5 2.07 16.5 AG
LHL 750B 09 17.27 0.680 3.18 0.125 101.60 4.00 21.03 120.0 791 177.6 61.0 2.40 19.2 AH
LHL 750B 10 16.89 0.665 3.18 0.125 114.30 4.50 19.63 112.0 830 186.5 69.9 2.75 22.0 AH
LHL 750B 11 16.64 0.655 3.18 0.125 127.00 5.00 18.23 104.0 857 192.4 78.6 3.10 24.8 AJ
LHL 750B 12 16.51 0.650 3.18 0.125 139.70 5.50 16.83 96.0 870 195.4 86.9 3.42 27.4 AJ
LHL 750B 13 17.15 0.675 3.18 0.125 152.40 6.00 14.02 80.0 791 177.6 90.4 3.56 28.5 AK
118 Deflection is expressed as a percentage of free length, with the approximate load required to attain that position.
DIE SPRINGS
Medium Heavy Load – Purple
● Ideal Operating Range 20% to 25% of Free Length ● Music Wire (MW), Chrome Silicon (CS)
LEE TO WORK TO WORK NOMINAL NOMINAL NOMINAL LOAD AT 37% APPROX. APPROX.
MATERIAL NOMINAL PRICE
STOCK IN HOLE OVER ROD OUTSIDE WIRE FREE DEFLECTION SOLID NO. OF
RATE GROUP
NUMBER DIA. MIN DIAMETER DIAMETER DIAMETER LENGTH (see footnote) HEIGHT COILS
MM IN MM IN MM IN MM IN MM IN N/mm
LB/IN N LB MM IN
LHL 1000B 01 CS 25.40 1.000 12.70 0.500 23.88 0.940 3.76 0.148 25.40 1.00 108.68 620.0 1,021 229.4 16.0 0.63 4.3 AG
LHL 1000B 02 24.26 0.955 3.96 0.156 31.75 1.25 98.16 560.0 1,153 259.0 19.8 0.78 5.0 AG
LHL 1000B 03 23.11 0.910 3.96 0.156 38.10 1.50 86.94 496.0 1,226 275.3 23.9 0.94 6.0 AG
LHL 1000B 04 24.00 0.945 4.11 0.162 44.45 1.75 77.13 440.0 1,268 284.9 27.7 1.09 6.7 AG
LHL 1000B 05 24.13 0.950 4.11 0.162 50.80 2.00 64.51 368.0 1,212 272.3 31.1 1.23 7.6 AH
LHL 1000B 06 24.00 0.945 4.11 0.162 63.50 2.50 50.48 288.0 1,186 266.4 38.0 1.50 9.2 AH
LHL 1000B 07 24.00 0.945 4.11 0.162 76.20 3.00 40.67 232.0 1,147 257.5 45.2 1.78 11.0 AJ
LHL 1000B 08 23.11 0.910 4.11 0.162 88.90 3.50 37.86 216.0 1,245 279.7 53.6 2.11 13.0 AJ
LHL 1000B 09 23.24 0.915 4.11 0.162 101.60 4.00 32.25 184.0 1,212 272.3 60.5 2.38 14.7 AK
LHL 1000B 10 23.75 0.935 4.11 0.162 114.30 4.50 26.64 152.0 1,127 253.1 66.5 2.62 16.2 AK
LHL 1000B 11 23.24 0.915 4.11 0.162 127.00 5.00 25.24 144.0 1,186 266.4 74.8 2.95 18.2 AL
LHL 1000B 12 23.37 0.920 4.11 0.162 139.70 5.50 22.44 128.0 1,160 260.5 81.7 3.22 19.8 AL
LHL 1000B 13 23.75 0.935 4.11 0.162 152.40 6.00 19.63 112.0 1,107 248.6 87.4 3.44 21.2 AM
LHL 1000B 14 23.75 0.935 4.11 0.162 177.80 7.00 16.69 95.3 1,098 246.8 100.8 3.97 24.5 AN
LHL 1250B 01 CS 31.75 1.250 15.88 0.625 30.48 1.200 4.95 0.195 38.10 1.50 127.08 725.0 1,792 402.4 24.0 0.95 4.8 AK
LHL 1250B 02 30.23 1.190 4.95 0.195 44.45 1.75 105.17 600.0 1,730 388.5 27.4 1.08 5.5 AK
LHL 1250B 03 29.46 1.160 4.95 0.195 50.80 2.00 94.66 540.0 1,779 399.6 31.4 1.24 6.3 AL
LHL 1250B 04 30.35 1.195 5.26 0.207 63.50 2.50 87.64 500.0 2,059 462.5 39.5 1.56 7.5 AL
LHL 1250B 05 29.59 1.165 5.26 0.207 76.20 3.00 75.37 430.0 2,125 477.3 47.4 1.87 9.0 AM
LHL 1250B 06 29.46 1.160 5.26 0.207 88.90 3.50 63.98 365.0 2,105 472.7 54.6 2.15 10.4 AM
LHL 1250B 07 29.46 1.160 5.26 0.207 101.60 4.00 55.22 315.0 2,076 466.2 61.6 2.43 11.7 AN
LHL 1250B 08 29.08 1.145 5.26 0.207 114.30 4.50 49.96 285.0 2,113 474.5 69.9 2.75 13.3 AN
LHL 1250B 09 28.96 1.140 5.26 0.207 127.00 5.00 44.70 255.0 2,100 471.8 77.9 3.07 14.8 AP
LHL 1250B 10 29.21 1.150 5.26 0.207 139.70 5.50 39.44 225.0 2,039 457.9 84.3 3.32 16.0 AP
LHL 1250B 11 29.21 1.150 5.26 0.207 152.40 6.00 35.93 205.0 2,026 455.1 91.6 3.61 17.4 AQ
LHL 1250B 12 29.21 1.150 5.26 0.207 177.80 7.00 30.47 174.0 2,005 450.7 105.6 4.16 20.1 AR
LHL 1500B 01 CS 38.10 1.500 19.05 0.750 36.20 1.425 5.94 0.234 50.80 2.00 130.59 745.0 2,455 551.3 31.8 1.25 5.3 AM
LHL 1500B 02 35.94 1.415 6.17 0.243 63.50 2.50 122.70 700.0 2,883 647.5 39.9 1.57 6.5 AM
LHL 1500B 03 35.81 1.410 6.17 0.243 76.20 3.00 98.16 560.0 2,768 621.6 47.4 1.87 7.7 AN
LHL 1500B 04 35.94 1.415 6.35 0.250 88.90 3.50 92.55 528.0 3,044 683.8 55.6 2.19 8.8 AN
LHL 1500B 05 35.18 1.385 6.35 0.250 101.60 4.00 84.14 480.0 3,163 710.4 63.6 2.51 10.0 AP
LHL 1500B 06 34.80 1.370 6.35 0.250 114.30 4.50 75.72 432.0 3,202 719.3 71.6 2.82 11.3 AP
LHL 1500B 07 35.31 1.390 6.35 0.250 127.00 5.00 64.51 368.0 3,031 680.8 78.4 3.09 12.3 AQ
LHL 1500B 08 34.80 1.370 6.35 0.250 139.70 5.50 60.30 344.0 3,117 700.0 86.7 3.42 13.7 AQ
LHL 1500B 09 35.18 1.385 6.35 0.250 152.40 6.00 53.29 304.0 3,005 674.9 93.2 3.67 14.7 AR
LHL 1500B 10 35.18 1.385 6.35 0.250 177.80 7.00 45.53 260.0 2,995 673.4 106.5 4.19 16.8 AT
LHL 2000B 01 CS 50.80 2.000 25.40 1.000 49.53 1.950 7.92 0.312 63.50 2.50 179.67 1025.0 4,221 948.1 39.9 1.57 5.0 AQ
LHL 2000B 02 48.26 1.900 7.92 0.312 76.20 3.00 149.00 850.0 4,201 943.5 47.8 1.88 6.0 AR
LHL 2000B 03 46.74 1.840 7.92 0.312 88.90 3.50 134.97 770.0 4,440 997.2 55.4 2.18 7.0 AR
LHL 2000B 04 46.48 1.830 7.92 0.312 101.60 4.00 116.39 664.0 4,376 982.8 62.5 2.46 7.9 AS
LHL 2000B 05 45.72 1.800 7.92 0.312 114.30 4.50 105.17 600.0 4,448 999.0 70.7 2.79 8.9 AS
LHL 2000B 06 49.53 1.950 8.41 0.331 127.00 5.00 98.16 560.0 4,613 1036.0 78.2 3.08 9.3 AT
LHL 2000B 07 49.53 1.950 8.41 0.331 139.70 5.50 88.35 504.0 4,566 1025.6 85.0 3.35 10.1 AT
LHL 2000B 08 49.02 1.930 8.41 0.331 152.40 6.00 82.74 472.0 4,665 1047.8 92.3 3.64 11.0 AU
LHL 2000B 09 49.02 1.930 8.41 0.331 177.80 7.00 69.62 397.5 4,580 1029.5 106.1 4.18 12.6 AW
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 119
DIE SPRINGS
Heavy Load – Black
● Ideal Operating Range 15% to 20% of Free Length ● Music Wire (MW), Chrome Silicon (CS)
LEE TO WORK TO WORK NOMINAL NOMINAL NOMINAL LOAD AT 30% APPROX. APPROX.
MATERIAL NOMINAL PRICE
STOCK IN HOLE OVER ROD OUTSIDE WIRE FREE DEFLECTION SOLID NO. OF
RATE GROUP
NUMBER DIA. MIN DIAMETER DIAMETER DIAMETER LENGTH (see footnote) HEIGHT COILS
MM IN MM IN MM IN MM IN MM IN N/mm
LB/IN N LB MM IN
LHL 375C 01 MW 9.53 0.375 4.76 0.188 8.69 0.342 1.57 0.062 25.40 1.00 21.74 124.0 166 37.2 15.9 0.63 10.1 AB
LHL 375C 02 8.76 0.345 1.57 0.062 31.75 1.25 17.18 98.0 164 36.8 18.7 0.74 11.9 AB
LHL 375C 03 8.84 0.348 1.65 0.065 38.10 1.50 16.83 96.0 192 43.2 23.4 0.92 14.2 AB
LHL 375C 04 8.76 0.345 1.65 0.065 44.45 1.75 14.72 84.0 196 44.1 26.9 1.06 16.3 AB
LHL 375C 05 8.76 0.345 1.65 0.065 50.80 2.00 12.62 72.0 192 43.2 30.9 1.22 18.7 AC
LHL 375C 06 9.02 0.355 1.70 0.067 63.50 2.50 10.52 60.0 200 45.0 38.7 1.53 22.8 AC
LHL 375C 07 9.02 0.355 1.65 0.065 76.20 3.00 7.36 42.0 168 37.8 45.7 1.80 27.7 AD
LHL 375C 08 8.76 0.345 1.65 0.065 152.40 6.00 3.94 22.5 180 40.5 91.2 3.59 55.2 AF
LHL 500C 01 MW 12.70 0.500 7.14 0.281 12.07 0.475 2.16 0.085 25.40 1.00 41.37 236.0 315 70.8 16.3 0.64 7.5 AC
LHL 500C 02 12.07 0.475 2.16 0.085 31.75 1.25 32.60 186.0 311 69.8 19.4 0.77 9.0 AC
LHL 500C 03 12.12 0.477 2.21 0.087 38.10 1.50 28.75 164.0 329 73.8 23.7 0.94 10.7 AC
LHL 500C 04 12.12 0.477 2.21 0.087 44.45 1.75 24.19 138.0 323 72.5 27.3 1.08 12.4 AC
LHL 500C 05 12.07 0.475 2.16 0.085 50.80 2.00 19.28 110.0 294 66.0 34.3 1.35 15.9 AD
LHL 500C 06 12.07 0.475 2.16 0.085 63.50 2.50 14.72 84.0 280 63.0 37.7 1.49 17.5 AD
LHL 500C 07 12.12 0.477 2.21 0.087 76.20 3.00 12.97 74.0 297 66.6 47.1 1.86 21.3 AE
LHL 500C 08 12.12 0.477 2.21 0.087 88.90 3.50 11.22 64.0 299 67.2 53.6 2.11 24.3 AE
LHL 500C 09 12.12 0.477 2.21 0.087 152.40 6.00 6.49 37.0 297 66.6 89.5 3.53 40.5 AG
LHL 625C 01 MW 15.88 0.625 8.73 0.344 15.04 0.592 2.77 0.109 25.40 1.00 74.32 424.0 566 127.2 17.4 0.69 6.3 AD
LHL 625C 02 15.24 0.600 2.77 0.109 31.75 1.25 51.89 296.0 494 111.0 21.7 0.86 7.8 AD
LHL 625C 03 14.81 0.583 2.77 0.109 38.10 1.50 47.68 272.0 545 122.4 25.0 0.99 9.0 AD
LHL 625C 04 15.11 0.595 2.84 0.112 44.45 1.75 42.07 240.0 561 126.0 29.6 1.17 10.4 AD
LHL 625C 05 14.96 0.589 2.84 0.112 50.80 2.00 36.46 208.0 556 124.8 34.3 1.35 12.1 AE
LHL 625C 06 14.99 0.590 2.84 0.112 63.50 2.50 29.80 170.0 568 127.5 40.6 1.60 14.3 AE
LHL 625C 07 14.99 0.590 2.84 0.112 76.20 3.00 25.24 144.0 577 129.6 46.7 1.84 16.4 AF
LHL 625C 08 14.99 0.590 2.84 0.112 88.90 3.50 21.39 122.0 570 128.1 54.2 2.14 19.1 AF
LHL 625C 09 15.11 0.595 2.92 0.115 101.60 4.00 18.93 108.0 577 129.6 67.6 2.66 23.1 AG
LHL 625C 10 15.11 0.595 2.92 0.115 152.40 6.00 12.27 70.0 561 126.0 101.0 3.98 34.6 AJ
LHL 750C 01 CS 19.05 0.750 9.52 0.375 18.03 0.710 3.43 0.135 25.40 1.00 139.35 795.0 1,062 238.5 17.8 0.70 5.2 AF
LHL 750C 02 18.29 0.720 3.61 0.142 31.75 1.25 127.96 730.0 1,219 273.8 22.2 0.88 6.2 AF
LHL 750C 03 18.03 0.710 3.61 0.142 38.10 1.50 106.05 605.0 1,212 272.3 26.4 1.04 7.3 AF
LHL 750C 04 18.03 0.710 3.61 0.142 44.45 1.75 87.64 500.0 1,169 262.5 30.5 1.20 8.5 AF
LHL 750C 05 18.03 0.710 3.61 0.142 50.80 2.00 74.50 425.0 1,134 255.0 34.5 1.36 9.6 AG
LHL 750C 06 18.03 0.710 3.61 0.142 63.50 2.50 57.85 330.0 1,102 247.5 42.4 1.67 11.8 AG
LHL 750C 07 18.54 0.730 3.76 0.148 76.20 3.00 52.59 300.0 1,202 270.0 51.6 2.03 13.7 AH
LHL 750C 08 18.54 0.730 3.76 0.148 88.90 3.50 44.70 255.0 1,192 267.8 59.4 2.34 15.8 AH
LHL 750C 09 18.54 0.730 3.76 0.148 101.60 4.00 38.56 220.0 1,175 264.0 67.6 2.66 18.0 AJ
LHL 750C 10 18.54 0.730 3.76 0.148 114.30 4.50 34.18 195.0 1,172 263.3 75.3 2.97 20.0 AJ
LHL 750C 11 18.42 0.725 3.76 0.148 127.00 5.00 30.85 176.0 1,175 264.0 84.6 3.33 22.5 AK
LHL 750C 12 18.42 0.725 3.76 0.148 139.70 5.50 28.05 160.0 1,175 264.0 92.2 3.63 24.5 AK
LHL 750C 13 18.42 0.725 3.76 0.148 152.40 6.00 25.24 144.0 1,154 259.2 101.9 4.01 27.1 AL
LHL 750C 17 18.42 0.725 3.76 0.148 304.80 12.00 12.61 72.0 1,153 259.2 201.3 7.93 51.9 AV
120 Deflection is expressed as a percentage of free length, with the approximate load required to attain that position.
DIE SPRINGS
Heavy Load – Black
● Ideal Operating Range 15% to 20% of Free Length ● Music Wire (MW), Chrome Silicon (CS)
LEE TO WORK TO WORK NOMINAL NOMINAL NOMINAL LOAD AT 30% APPROX. APPROX.
MATERIAL NOMINAL PRICE
STOCK IN HOLE OVER ROD OUTSIDE WIRE FREE DEFLECTION SOLID NO. OF
RATE GROUP
NUMBER DIA. MIN DIAMETER DIAMETER DIAMETER LENGTH (see footnote) HEIGHT COILS
MM IN MM IN MM IN MM IN MM IN N/mm
LB/IN N LB MM IN
LHL 1000C 01 CS 25.40 1.000 12.70 0.500 24.77 0.975 4.32 0.170 25.40 1.00 192.82 1100.0 1,469 330.0 17.8 0.70 4.1 AH
LHL 1000C 02 24.51 0.965 4.50 0.177 31.75 1.25 175.29 1000.0 1,670 375.0 22.0 0.87 4.9 AH
LHL 1000C 03 23.24 0.915 4.50 0.177 38.10 1.50 157.76 900.0 1,803 405.0 26.5 1.05 5.9 AH
LHL 1000C 04 22.61 0.890 4.50 0.177 44.45 1.75 140.23 800.0 1,870 420.0 31.0 1.22 6.9 AH
LHL 1000C 05 23.24 0.915 4.65 0.183 50.80 2.00 128.84 735.0 1,963 441.0 35.4 1.40 7.6 AJ
LHL 1000C 06 23.75 0.935 4.75 0.187 63.50 2.50 103.42 590.0 1,970 442.5 43.6 1.72 9.2 AJ
LHL 1000C 07 23.75 0.935 4.75 0.187 76.20 3.00 84.14 480.0 1,923 432.0 51.3 2.02 10.8 AK
LHL 1000C 08 23.75 0.935 4.75 0.187 88.90 3.50 70.12 400.0 1,870 420.0 59.7 2.35 12.6 AK
LHL 1000C 09 23.75 0.935 4.75 0.187 101.60 4.00 60.47 345.0 1,843 414.0 67.6 2.66 14.2 AL
LHL 1000C 10 23.75 0.935 4.75 0.187 114.30 4.50 53.46 305.0 1,833 411.8 75.2 2.96 15.8 AL
LHL 1000C 11 24.38 0.960 4.88 0.192 127.00 5.00 49.96 285.0 1,903 427.5 83.8 3.30 17.2 AM
LHL 1000C 12 24.38 0.960 4.88 0.192 139.70 5.50 45.58 260.0 1,910 429.0 90.9 3.58 18.6 AM
LHL 1000C 13 24.38 0.960 4.88 0.192 152.40 6.00 41.19 235.0 1,883 423.0 99.4 3.92 20.4 AN
LHL 1000C 14 24.38 0.960 4.88 0.192 177.80 7.00 35.03 200.0 1,868 420.0 114.9 4.52 23.6 AP
LHL 1250C 01 CS 31.75 1.250 15.88 0.625 30.23 1.190 5.72 0.225 38.10 1.50 236.64 1350.0 2,705 607.5 26.5 1.05 4.6 AL
LHL 1250C 02 30.23 1.190 5.72 0.225 44.45 1.75 192.82 1100.0 2,571 577.5 30.1 1.19 5.3 AL
LHL 1250C 03 30.23 1.190 5.72 0.225 50.80 2.00 175.29 1000.0 2,671 600.0 35.1 1.38 6.1 AM
LHL 1250C 04 30.23 1.190 5.94 0.234 63.50 2.50 159.51 910.0 3,039 682.5 44.2 1.74 7.4 AM
LHL 1250C 05 29.97 1.180 5.94 0.234 76.20 3.00 131.47 750.0 3,005 675.0 52.3 2.06 8.8 AN
LHL 1250C 06 30.48 1.200 6.17 0.243 88.90 3.50 125.33 715.0 3,343 750.8 61.8 2.44 10.0 AN
LHL 1250C 07 30.35 1.195 6.17 0.243 101.60 4.00 109.56 625.0 3,339 750.0 70.0 2.76 11.3 AP
LHL 1250C 08 30.35 1.195 6.17 0.243 114.30 4.50 95.53 545.0 3,276 735.8 78.4 3.09 12.7 AP
LHL 1250C 09 30.35 1.195 6.17 0.243 127.00 5.00 84.14 480.0 3,206 720.0 87.2 3.44 14.1 AQ
LHL 1250C 10 30.35 1.195 6.17 0.243 139.70 5.50 75.37 430.0 3,159 709.5 96.0 3.78 15.6 AQ
LHL 1250C 11 30.35 1.195 6.17 0.243 152.40 6.00 68.36 390.0 3,126 702.0 104.5 4.12 16.9 AR
LHL 1250C 12 30.35 1.195 6.17 0.243 177.80 7.00 59.19 338.0 3,157 709.8 118.4 4.66 19.2 AS
LHL 1500C 01 CS 38.10 1.500 19.05 0.750 36.70 1.445 6.65 0.262 50.80 2.00 219.11 1250.0 3,339 750.0 35.2 1.39 5.3 AN
LHL 1500C 02 36.96 1.455 6.93 0.273 63.50 2.50 197.20 1125.0 3,757 843.8 43.8 1.73 6.3 AN
LHL 1500C 03 35.56 1.400 6.93 0.273 76.20 3.00 175.29 1000.0 4,007 900.0 52.7 2.08 7.6 AP
LHL 1500C 04 36.32 1.430 7.19 0.283 88.90 3.50 163.02 930.0 4,348 976.5 61.7 2.43 8.6 AP
LHL 1500C 05 36.07 1.420 7.19 0.283 101.60 4.00 142.86 815.0 4,354 978.0 70.0 2.76 9.7 AQ
LHL 1500C 06 36.07 1.420 7.19 0.283 114.30 4.50 124.45 710.0 4,268 958.5 78.2 3.08 10.9 AQ
LHL 1500C 07 35.94 1.415 7.19 0.283 127.00 5.00 111.31 635.0 4,241 952.5 86.5 3.41 12.0 AR
LHL 1500C 08 35.94 1.415 7.19 0.283 139.70 5.50 99.91 570.0 4,187 940.5 94.9 3.74 13.2 AR
LHL 1500C 09 35.94 1.415 7.19 0.283 152.40 6.00 90.27 515.0 4,127 927.0 103.5 4.08 14.4 AS
LHL 1500C 10 35.94 1.415 7.19 0.283 177.80 7.00 77.06 440.0 4,110 924.0 118.2 4.65 16.5 AU
LHL 2000C 01 CS 50.80 2.000 25.40 1.000 48.13 1.895 8.71 0.343 63.50 2.50 302.37 1725.0 5,760 1293.8 44.3 1.75 5.1 AR
LHL 2000C 02 46.74 1.840 8.71 0.343 76.20 3.00 254.17 1450.0 5,810 1305.0 53.1 2.09 6.1 AS
LHL 2000C 03 46.74 1.840 8.71 0.343 88.90 3.50 210.35 1200.0 5,610 1260.0 60.7 2.39 7.0 AS
LHL 2000C 04 46.23 1.820 8.71 0.343 101.60 4.00 184.05 1050.0 5,610 1260.0 69.0 2.72 7.9 AT
LHL 2000C 05 49.02 1.930 9.19 0.362 114.30 4.50 177.92 1015.0 6,101 1370.3 76.6 3.02 8.3 AT
LHL 2000C 06 47.75 1.880 9.19 0.362 127.00 5.00 168.28 960.0 6,411 1440.0 86.4 3.40 9.4 AU
LHL 2000C 07 47.50 1.870 9.19 0.362 139.70 5.50 153.38 875.0 6,428 1443.8 94.4 3.72 10.3 AU
LHL 2000C 08 47.24 1.860 9.19 0.362 152.40 6.00 140.23 800.0 6,411 1440.0 103.1 4.06 11.2 AV
LHL 2000C 09 47.24 1.860 9.19 0.362 177.80 7.00 118.21 675.0 6,305 1417.5 118.4 4.66 12.9 AX
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 121
DIE SPRINGS
Extra Heavy Load – Orange
● Ideal Operating Range 10% to 15% of Free Length ● Music Wire (MW), Chrome Silicon (CS)
LEE TO WORK TO WORK NOMINAL NOMINAL NOMINAL LOAD AT 25% APPROX. APPROX.
MATERIAL NOMINAL PRICE
STOCK IN HOLE OVER ROD OUTSIDE WIRE FREE DEFLECTION SOLID NO. OF
RATE GROUP
NUMBER DIA. MIN DIAMETER DIAMETER DIAMETER LENGTH (see footnote) HEIGHT COILS
MM IN MM IN MM IN MM IN MM IN N/mm
LB/IN N LB MM IN
LHL 375D 01 MW 9.53 0.375 4.76 0.188 8.76 0.345 1.78 0.070 25.40 1.00 38.56 220.0 245 55.0 17.4 0.69 9.8 AC
LHL 375D 02 8.76 0.345 1.78 0.070 31.75 1.25 29.80 170.0 237 53.1 21.5 0.85 12.1 AC
LHL 375D 03 8.81 0.347 1.80 0.071 38.10 1.50 25.42 145.0 242 54.4 25.9 1.02 14.4 AC
LHL 375D 04 8.99 0.354 1.80 0.071 44.45 1.75 20.16 115.0 224 50.3 29.5 1.16 16.3 AC
LHL 375D 05 8.76 0.345 1.78 0.070 50.80 2.00 17.53 100.0 223 50.0 34.0 1.34 19.1 AD
LHL 375D 06 8.94 0.352 1.80 0.071 63.50 2.50 14.02 80.0 223 50.0 41.8 1.65 23.2 AD
LHL 375D 07 8.97 0.353 1.80 0.071 76.20 3.00 11.39 65.0 217 48.8 49.8 1.96 27.6 AE
LHL 375D 08 8.97 0.353 1.80 0.071 152.40 6.00 5.61 32.0 214 48.0 97.7 3.85 54.2 AG
LHL 375D 12 8.97 0.353 1.80 0.071 304.80 12.00 2.73 15.6 208 46.8 213.9 8.42 111.0 AP
LHL 500D 01 MW 12.70 0.500 7.14 0.281 12.19 0.480 2.34 0.092 25.40 1.00 56.09 320.0 356 80.0 17.7 0.70 7.6 AD
LHL 500D 02 12.19 0.480 2.34 0.092 31.75 1.25 42.07 240.0 334 75.0 22.0 0.87 9.4 AD
LHL 500D 03 12.19 0.480 2.34 0.092 38.10 1.50 35.06 200.0 334 75.0 25.4 1.00 10.9 AD
LHL 500D 04 12.19 0.480 2.34 0.092 44.45 1.75 29.80 170.0 331 74.4 29.1 1.15 12.4 AD
LHL 500D 05 12.19 0.480 2.34 0.092 50.80 2.00 24.54 140.0 312 70.0 34.3 1.35 14.7 AE
LHL 500D 06 12.19 0.480 2.34 0.092 63.50 2.50 20.16 115.0 320 71.9 40.8 1.61 17.4 AE
LHL 500D 07 12.19 0.480 2.34 0.092 76.20 3.00 15.78 90.0 301 67.5 50.7 2.00 21.7 AF
LHL 500D 08 12.19 0.480 2.34 0.092 88.90 3.50 14.02 80.0 312 70.0 56.4 2.22 24.1 AF
LHL 500D 09 12.19 0.480 2.34 0.092 152.40 6.00 7.89 45.0 301 67.5 96.5 3.80 41.3 AH
LHL 625D 01 MW 15.88 0.625 8.73 0.344 15.24 0.600 3.00 0.118 25.40 1.00 110.43 630.0 701 157.5 17.9 0.71 6.0 AE
LHL 625D 02 15.24 0.600 3.00 0.118 31.75 1.25 82.39 470.0 654 146.9 22.0 0.87 7.3 AE
LHL 625D 03 15.24 0.600 3.00 0.118 38.10 1.50 66.61 380.0 634 142.5 25.8 1.02 8.6 AE
LHL 625D 04 15.24 0.600 3.00 0.118 44.45 1.75 56.09 320.0 623 140.0 29.5 1.16 9.8 AE
LHL 625D 05 15.24 0.600 3.05 0.120 50.80 2.00 50.83 290.0 646 145.0 34.7 1.37 11.4 AF
LHL 625D 06 15.24 0.600 3.05 0.120 63.50 2.50 38.56 220.0 612 137.5 43.7 1.72 14.3 AF
LHL 625D 07 15.24 0.600 3.05 0.120 76.20 3.00 31.55 180.0 601 135.0 51.9 2.05 17.0 AG
LHL 625D 08 15.24 0.600 3.05 0.120 88.90 3.50 28.05 160.0 623 140.0 57.7 2.27 18.9 AG
LHL 625D 09 15.24 0.600 3.05 0.120 101.60 4.00 23.66 135.0 601 135.0 67.2 2.65 22.0 AH
LHL 625D 10 15.24 0.600 3.05 0.120 152.40 6.00 15.78 90.0 601 135.0 97.7 3.85 32.0 AK
LHL 750D 01 CS 19.05 0.750 9.52 0.375 18.54 0.730 3.76 0.148 25.40 1.00 201.58 1150.0 1,280 287.5 19.1 0.75 5.1 AG
LHL 750D 02 18.54 0.730 3.91 0.154 31.75 1.25 184.93 1055.0 1,468 329.7 23.6 0.93 6.0 AG
LHL 750D 03 18.54 0.730 3.91 0.154 38.10 1.50 144.61 825.0 1,377 309.4 28.1 1.11 7.2 AG
LHL 750D 04 18.54 0.730 3.91 0.154 44.45 1.75 119.20 680.0 1,325 297.5 32.5 1.28 8.3 AG
LHL 750D 05 18.54 0.730 3.91 0.154 50.80 2.00 102.54 585.0 1,302 292.5 36.3 1.43 9.3 AH
LHL 750D 06 18.54 0.730 3.91 0.154 63.50 2.50 78.88 450.0 1,252 281.3 44.8 1.77 11.5 AH
LHL 750D 07 18.54 0.730 3.96 0.156 76.20 3.00 68.36 390.0 1,302 292.5 54.0 2.13 13.6 AJ
LHL 750D 08 18.54 0.730 3.96 0.156 88.90 3.50 57.85 330.0 1,286 288.8 62.2 2.45 15.7 AJ
LHL 750D 09 18.54 0.730 3.96 0.156 101.60 4.00 49.96 285.0 1,269 285.0 70.9 2.79 17.9 AK
LHL 750D 10 18.54 0.730 3.96 0.156 114.30 4.50 43.82 250.0 1,252 281.3 79.6 3.14 20.1 AK
LHL 750D 11 18.54 0.730 3.96 0.156 127.00 5.00 38.56 220.0 1,224 275.0 89.3 3.52 22.5 AL
LHL 750D 12 18.54 0.730 3.96 0.156 139.70 5.50 35.06 200.0 1,224 275.0 97.4 3.84 24.6 AL
LHL 750D 13 18.54 0.730 3.96 0.156 152.40 6.00 31.55 180.0 1,202 270.0 107.3 4.23 27.1 AM
122 Deflection is expressed as a percentage of free length, with the approximate load required to attain that position.
DIE SPRINGS
Extra Heavy Load – Orange
● Ideal Operating Range 10% to 15% of Free Length ● Music Wire (MW), Chrome Silicon (CS)
LEE TO WORK TO WORK NOMINAL NOMINAL NOMINAL LOAD AT 25% APPROX. APPROX.
MATERIAL NOMINAL PRICE
STOCK IN HOLE OVER ROD OUTSIDE WIRE FREE DEFLECTION SOLID NO. OF
RATE GROUP
NUMBER DIA. MIN DIAMETER DIAMETER DIAMETER LENGTH (see footnote) HEIGHT COILS
MM IN MM IN MM IN MM IN MM IN N/mm
LB/IN N LB MM IN
LHL 1000D 01 CS 25.40 1.000 12.70 0.500 24.89 0.980 5.03 0.198 38.10 1.50 224.37 1280.0 2,137 480.0 28.1 1.11 5.6 AJ
LHL 1000D 02 24.77 0.975 5.26 0.207 50.80 2.00 199.83 1140.0 2,538 570.0 37.5 1.48 7.1 AK
LHL 1000D 03 24.77 0.975 5.26 0.207 63.50 2.50 150.75 860.0 2,393 537.5 46.4 1.83 8.8 AK
LHL 1000D 04 24.77 0.975 5.26 0.207 76.20 3.00 122.70 700.0 2,337 525.0 54.5 2.15 10.4 AL
LHL 1000D 05 24.77 0.975 5.26 0.207 88.90 3.50 102.54 585.0 2,279 511.9 63.1 2.49 12.0 AL
LHL 1000D 06 24.77 0.975 5.26 0.207 101.60 4.00 88.52 505.0 2,248 505.0 71.5 2.82 13.6 AM
LHL 1000D 07 24.77 0.975 5.26 0.207 114.30 4.50 77.13 440.0 2,204 495.0 80.4 3.17 15.3 AM
LHL 1000D 08 24.51 0.965 5.26 0.207 127.00 5.00 69.24 395.0 2,198 493.8 88.4 3.48 16.8 AN
LHL 1000D 09 24.51 0.965 5.26 0.207 152.40 6.00 56.09 320.0 2,137 480.0 106.7 4.20 20.3 AP
LHL 1250D 01 CS 31.75 1.250 15.88 0.625 30.61 1.205 6.35 0.250 50.80 2.00 284.84 1625.0 3,618 812.5 38.0 1.50 6.0 AN
LHL 1250D 02 30.61 1.205 6.35 0.250 63.50 2.50 212.10 1210.0 3,367 756.3 46.7 1.84 7.4 AN
LHL 1250D 03 30.99 1.220 6.65 0.262 76.20 3.00 207.54 1184.0 3,954 888.0 56.8 2.24 8.5 AP
LHL 1250D 04 30.73 1.210 6.65 0.262 88.90 3.50 176.69 1008.0 3,927 882.0 66.0 2.60 9.9 AP
LHL 1250D 05 30.99 1.220 6.65 0.262 101.60 4.00 147.24 840.0 3,740 840.0 74.5 2.94 11.2 AQ
LHL 1250D 06 30.35 1.195 6.65 0.262 114.30 4.50 137.43 784.0 3,927 882.0 84.3 3.32 12.7 AQ
LHL 1250D 07 30.61 1.205 6.65 0.262 127.00 5.00 119.20 680.0 3,784 850.0 92.6 3.65 13.9 AR
LHL 1250D 08 30.48 1.200 6.65 0.262 152.40 6.00 98.16 560.0 3,740 840.0 111.1 4.38 16.7 AS
LHL 1250D 10 30.48 1.200 6.65 0.262 203.20 8.00 72.68 415.0 3,692 830.0 144.9 5.71 21.8 AV
LHL 1500D 01 CS 38.10 1.500 19.05 0.750 37.21 1.465 7.49 0.295 50.80 2.00 386.51 2205.0 4,909 1102.5 38.1 1.50 5.1 AP
LHL 1500D 02 36.96 1.455 7.77 0.306 63.50 2.50 345.32 1970.0 5,482 1231.3 47.5 1.87 6.1 AP
LHL 1500D 03 36.83 1.450 7.92 0.312 76.20 3.00 302.37 1725.0 5,760 1293.8 56.8 2.24 7.2 AQ
LHL 1500D 04 36.83 1.450 7.92 0.312 88.90 3.50 248.03 1415.0 5,513 1238.1 65.8 2.59 8.3 AR
LHL 1500D 05 37.21 1.465 7.92 0.312 101.60 4.00 210.35 1200.0 5,343 1200.0 74.7 2.94 9.4 AS
LHL 1500D 06 37.21 1.465 7.92 0.312 114.30 4.50 183.18 1045.0 5,234 1175.6 83.4 3.29 10.5 AS
LHL 1500D 07 37.21 1.465 7.92 0.312 127.00 5.00 161.27 920.0 5,120 1150.0 92.7 3.65 11.7 AT
LHL 1500D 08 37.21 1.465 7.92 0.312 152.40 6.00 131.47 750.0 5,009 1125.0 110.0 4.33 13.9 AV
LHL 1500D 10 37.21 1.465 7.92 0.312 203.20 8.00 95.80 547.0 4,866 1094.0 144.6 5.69 18.3 AY
LHL 2000D 01 CS 50.80 2.000 25.40 1.000 49.28 1.940 9.53 0.375 63.50 2.50 438.22 2500.0 6,957 1562.5 47.4 1.87 5.0 AT
LHL 2000D 02 47.63 1.875 9.53 0.375 76.20 3.00 376.87 2150.0 7,179 1612.5 56.5 2.23 5.9 AU
LHL 2000D 03 49.78 1.960 9.98 0.393 88.90 3.50 341.81 1950.0 7,597 1706.3 65.8 2.59 6.6 AU
LHL 2000D 04 49.78 1.960 9.98 0.393 101.60 4.00 289.23 1650.0 7,346 1650.0 74.0 2.92 7.4 AV
LHL 2000D 05 49.78 1.960 9.98 0.393 114.30 4.50 249.79 1425.0 7,138 1603.1 82.7 3.26 8.3 AW
LHL 2000D 06 49.78 1.960 9.98 0.393 127.00 5.00 219.11 1250.0 6,957 1562.5 91.4 3.60 9.2 AW
LHL 2000D 07 49.78 1.960 9.98 0.393 152.40 6.00 177.92 1015.0 6,779 1522.5 108.0 4.25 10.8 AX
LHL 2000D 09 49.78 1.960 9.98 0.393 203.20 8.00 128.55 734.0 6,530 1468.0 141.2 5.56 14.1 AZ
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 123
R E D U X ™ WAV E S P R I N G S
Guide to using tables
Free Height
Wire Thickness
is the overall height of a spring in Radial Wall
Rod Diameter is the thickness of flat wire
the unloaded position. is the width of flat
is the outside diameter of used to make a wave spring
wire used to make a
an assembly over which a
wave spring.
wave spring is installed.
R E D U X ™ Wav E s p R i n g s
Price Group
Lee Stock Number ● Stainless Steel 17-7 PH
LEE HOLE ROD NOMINaL LOaD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNS WaVES SPRING RaTE PRICE reference to the price list.
ordering reference. STOCK
NUMBER
DIaMETER DIaMETER RaDIaL WaLL PER
TURN
GROUP
a spring that causes LW 025 02 0150S 1.91 0.075 3.81 0.150 6 4.73 27.000 N are the number of circular
LW 025 02 0175S 2.16 0.085 4.45 0.175 7 3.85 22.000 P
deflection to working
LW 025 02 0200S
LW 025 02 0225S
2.41
3.05
0.095
0.120
5.08
5.72
0.200
0.225
8
9
3.33
3.33
19.000
19.000
Q
Q
turns of flat wire formed
LW 025 02 0275S 3.56 0.140 6.99 0.275 11 2.63 15.000 R
height. LW 025 02 0325S 4.32 0.170 8.26 0.325 13 2.28 13.000 T in a wave spring.
LW 025 05 0075S 6.35 0.250 3.81 0.150 22.24 5.00 0.94 0.037 1.91 0.075 0.20 x 0.61 0.008 x 0.024 3 2.5 23.12 132.000 L
LW 025 05 0100S 1.22 0.048 2.54 0.100 4 16.81 96.000 L
2 Produced in stainless steel type 17-7 PH and featuring a uniform outside diameter and wave heights our wave springs
offer optimum performance in static or slightly dynamic applications where space is critical or where radial and axial
tolerances are tight. Constructed from a single strand of pre-tempered flat wire and passivated finish the springs have
12 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
maximum temperature resistance of 340° C (650° F).
3 Stock sizes range from Rod sizes of 4.00 mm (0.157”) to 35.00 mm (1.378”) with Hole diameters from 6.00 mm (0.236”)
to 45 mm (1.772”) and in Spring Rates from 1.51 N/mm (8.62 lb/in) to 114.95 N/mm (656.350 lb/in).
124 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LWM06 006 0152S 6.00 0.236 4.00 0.157 6.00 1.35 0.61 0.024 1.52 0.060 0.13 x 0.51 0.005 x 0.020 3 2.5 6.56 37.460 K
LWM06 006 0203S 0.81 0.032 2.03 0.080 4 4.92 28.090 L
LWM06 006 0254S 1.02 0.040 2.54 0.100 5 3.94 22.500 L
LWM06 006 0305S 1.22 0.048 3.05 0.120 6 3.28 18.730 L
LWM06 006 0356S 1.42 0.056 3.56 0.140 7 2.81 16.040 M
LWM06 006 0406S 1.63 0.064 4.06 0.160 8 2.46 14.050 N
LWM06 006 0457S 1.83 0.072 4.57 0.180 9 2.19 12.500 P
LWM06 006 0559S 2.24 0.088 5.59 0.220 11 1.79 10.220 Q
LWM06 006 0660S 2.64 0.104 6.60 0.260 13 1.51 8.620 R
LWM06 012 0152S 6.00 0.236 4.00 0.157 12.00 2.70 0.74 0.029 1.52 0.060 0.15 x 0.61 0.006 x 0.024 3 2.5 15.24 87.020 K
LWM06 012 0203S 0.97 0.038 2.03 0.080 4 11.25 64.240 L
LWM06 012 0254S 1.22 0.048 2.54 0.100 5 9.09 51.900 L
LWM06 012 0305S 1.47 0.058 3.05 0.120 6 7.62 43.510 L
LWM06 012 0356S 1.70 0.067 3.56 0.140 7 6.47 36.940 M
LWM06 012 0406S 1.96 0.077 4.06 0.160 8 5.69 32.490 N
LWM06 012 0457S 2.18 0.086 4.57 0.180 9 5.03 28.720 P
LWM06 012 0559S 2.69 0.106 5.59 0.220 11 4.14 23.640 Q
LWM06 012 0660S 3.18 0.125 6.60 0.260 13 3.50 19.980 R
LW 025 02 0075S 6.35 0.250 3.81 0.150 8.90 2.00 0.84 0.033 1.91 0.075 0.15 x 0.61 0.006 x 0.024 3 2.5 8.41 48.000 L
LW 025 02 0100S 1.27 0.050 2.54 0.100 4 7.01 40.000 L
LW 025 02 0125S 1.52 0.060 3.18 0.125 5 5.43 31.000 L
LW 025 02 0150S 1.91 0.075 3.81 0.150 6 4.73 27.000 N
LW 025 02 0175S 2.16 0.085 4.45 0.175 7 3.85 22.000 P
LW 025 02 0200S 2.41 0.095 5.08 0.200 8 3.33 19.000 Q
LW 025 02 0225S 3.05 0.120 5.72 0.225 9 3.33 19.000 Q
LW 025 02 0275S 3.56 0.140 6.99 0.275 11 2.63 15.000 R
LW 025 02 0325S 4.32 0.170 8.26 0.325 13 2.28 13.000 T
LW 025 05 0075S 6.35 0.250 3.81 0.150 22.24 5.00 0.94 0.037 1.91 0.075 0.20 x 0.61 0.008 x 0.024 3 2.5 23.12 132.000 L
LW 025 05 0100S 1.22 0.048 2.54 0.100 4 16.81 96.000 L
LW 025 05 0125S 1.65 0.065 3.18 0.125 5 14.54 83.000 L
LW 025 05 0150S 1.91 0.075 3.81 0.150 6 11.73 67.000 N
LW 025 05 0175S 2.29 0.090 4.45 0.175 7 10.33 59.000 P
LW 025 05 0200S 2.54 0.100 5.08 0.200 8 8.76 50.000 Q
LW 025 05 0225S 3.05 0.120 5.72 0.225 9 8.41 48.000 R
LW 025 05 0275S 3.76 0.148 6.99 0.275 11 6.83 39.000 T
LW 025 05 0325S 4.45 0.175 8.26 0.325 13 5.78 33.000 W
LW 031 03 0114S 7.92 0.312 5.08 0.200 13.34 3.00 1.78 0.070 2.90 0.114 0.20 x 0.81 0.008 x 0.032 3 2.5 11.91 68.000 L
LW 031 03 0152S 2.44 0.096 3.86 0.152 4 9.46 54.000 L
LW 031 03 0190S 3.00 0.118 4.83 0.190 5 7.36 42.000 L
LW 031 03 0228S 3.68 0.145 5.79 0.228 6 6.30 36.000 N
LW 031 03 0266S 4.19 0.165 6.76 0.266 7 5.25 30.000 N
LW 031 03 0304S 4.95 0.195 7.72 0.304 8 4.90 28.000 P
LW 031 03 0342S 5.46 0.215 8.69 0.342 9 4.20 24.000 Q
LW 031 03 0418S 6.65 0.262 10.62 0.418 11 3.33 19.000 V
LW 031 03 0494S 7.85 0.309 12.55 0.494 13 2.80 16.000 V
LW 031 06 0114S 7.92 0.312 5.08 0.200 26.69 6.00 1.83 0.072 2.90 0.114 0.25 x 0.81 0.010 x 0.032 3 2.5 25.04 143.000 L
LW 031 06 0152S 2.44 0.096 3.86 0.152 4 18.74 107.000 L
LW 031 06 0190S 3.12 0.123 4.83 0.190 5 15.76 90.000 N
LW 031 06 0228S 3.66 0.144 5.79 0.228 6 12.43 71.000 P
LW 031 06 0266S 4.47 0.176 6.76 0.266 7 11.73 67.000 Q
LW 031 06 0304S 5.00 0.197 7.72 0.304 8 9.81 56.000 Q
LW 031 06 0342S 5.77 0.227 8.69 0.342 9 9.11 52.000 T
LW 031 06 0418S 7.06 0.278 10.62 0.418 11 7.53 43.000 T
LW 031 06 0494S 8.53 0.336 12.55 0.494 13 6.65 38.000 W
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 125
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LWM08 015 0282S 8.00 0.315 5.00 0.197 15.00 3.37 1.70 0.067 2.82 0.111 0.20 x 0.81 0.008 x 0.032 3 2.5 13.42 76.630 L
LWM08 015 0376S 2.39 0.094 3.76 0.148 4 10.94 62.470 L
LWM08 015 0470S 2.74 0.108 4.70 0.185 5 7.67 43.790 L
LWM08 015 0564S 3.56 0.140 5.64 0.222 6 7.20 41.110 N
LWM08 015 0658S 4.01 0.158 6.58 0.259 7 5.85 33.400 N
LWM08 015 0752S 4.57 0.180 7.52 0.296 8 5.09 29.060 P
LWM08 015 0846S 5.26 0.207 8.46 0.333 9 4.69 26.780 Q
LWM08 015 1034S 6.35 0.250 10.34 0.407 11 3.76 21.470 V
LWM08 015 1222S 7.37 0.290 12.22 0.481 13 3.09 17.640 V
LWM08 030 0282S 8.00 0.315 5.00 0.197 30.00 6.74 1.78 0.070 2.82 0.111 0.25 x 0.81 0.010 x 0.032 3 2.5 28.81 164.500 L
LWM08 030 0376S 2.54 0.100 3.76 0.148 4 24.61 140.520 L
LWM08 030 0470S 3.05 0.120 4.70 0.185 5 18.17 103.750 L
LWM08 030 0564S 3.81 0.150 5.64 0.222 6 16.40 93.640 N
LWM08 030 0658S 4.32 0.170 6.58 0.259 7 13.27 75.770 N
LWM08 030 0752S 4.95 0.195 7.52 0.296 8 11.69 66.750 P
LWM08 030 0846S 5.59 0.220 8.46 0.333 9 10.45 59.670 Q
LWM08 030 1034S 6.86 0.270 10.34 0.407 11 8.62 49.220 V
LWM08 030 1222S 7.87 0.310 12.22 0.481 13 6.91 39.460 V
LW 038 04 0150S 9.53 0.375 6.35 0.250 17.79 4.00 1.57 0.062 3.81 0.150 0.20 x 0.81 0.008 x 0.032 3 2.5 7.88 45.000 M
LW 038 04 0200S 2.49 0.098 5.08 0.200 4 6.83 39.000 M
LW 038 04 0250S 2.74 0.108 6.35 0.250 5 4.90 28.000 M
LW 038 04 0300S 3.43 0.135 7.62 0.300 6 4.20 24.000 N
LW 038 04 0350S 3.81 0.150 8.89 0.350 7 3.50 20.000 P
LW 038 04 0400S 4.67 0.184 10.16 0.400 8 3.33 19.000 R
LW 038 04 0450S 4.95 0.195 11.43 0.450 9 2.80 16.000 S
LW 038 04 0500S 5.79 0.228 12.70 0.500 10 2.63 15.000 T
LW 038 04 0550S 6.10 0.240 13.97 0.550 11 2.28 13.000 T
LW 038 07 0150S 9.53 0.375 6.35 0.250 31.14 7.00 2.06 0.081 3.81 0.150 0.28 x 0.81 0.011 x 0.032 3 2.5 17.69 101.000 M
LW 038 07 0200S 3.02 0.119 5.08 0.200 4 15.06 86.000 N
LW 038 07 0250S 3.68 0.145 6.35 0.250 5 11.73 67.000 P
LW 038 07 0300S 4.57 0.180 7.62 0.300 6 10.16 58.000 Q
LW 038 07 0350S 5.13 0.202 8.89 0.350 7 8.23 47.000 Q
LW 038 07 0400S 6.10 0.240 10.16 0.400 8 7.71 44.000 Q
LW 038 07 0450S 6.65 0.262 11.43 0.450 9 6.48 37.000 T
LW 038 07 0500S 7.57 0.298 12.70 0.500 10 6.13 35.000 T
LW 038 07 0550S 8.31 0.327 13.97 0.550 11 5.43 31.000 T
LWM10 018 0396S 10.00 0.394 7.00 0.276 18.00 4.05 1.91 0.075 3.96 0.156 0.20 x 0.81 0.008 x 0.032 3 2.5 8.75 49.960 L
LWM10 018 0528S 2.54 0.100 5.28 0.208 4 6.56 37.460 M
LWM10 018 0660S 3.15 0.124 6.60 0.260 5 5.21 29.750 M
LWM10 018 0792S 3.78 0.149 7.92 0.312 6 4.35 24.840 N
LWM10 018 0925S 4.42 0.174 9.25 0.364 7 3.73 21.300 P
LWM10 018 1057S 5.05 0.199 10.57 0.416 8 3.27 18.670 R
LWM10 018 1189S 5.69 0.224 11.89 0.468 9 2.90 16.560 S
LWM10 018 1321S 6.32 0.249 13.21 0.520 10 2.61 14.900 T
LWM10 018 1453S 6.96 0.274 14.53 0.572 11 2.38 13.590 U
LWM10 035 0396S 10.00 0.394 7.00 0.276 35.00 7.87 2.03 0.080 3.96 0.156 0.28 x 0.81 0.011 x 0.032 3 2.5 18.13 103.520 L
LWM10 035 0528S 2.79 0.110 5.28 0.208 4 14.06 80.280 M
LWM10 035 0660S 3.56 0.140 6.60 0.260 5 11.48 65.550 M
LWM10 035 0792S 4.32 0.170 7.92 0.312 6 9.70 55.390 N
LWM10 035 0925S 5.08 0.200 9.25 0.364 7 8.40 47.960 P
LWM10 035 1057S 5.84 0.230 10.57 0.416 8 7.41 42.310 R
LWM10 035 1189S 6.60 0.260 11.89 0.468 9 6.62 37.800 S
LWM10 035 1321S 7.37 0.290 13.21 0.520 10 5.99 34.200 T
LWM10 035 1453S 8.13 0.320 14.53 0.572 11 5.47 31.230 U
126 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LW 044 04 0165S 11.10 0.437 7.14 0.281 17.79 4.00 1.60 0.063 4.19 0.165 0.20 x 1.02 0.008 x 0.040 3 2.5 6.83 39.000 M
LW 044 04 0220S 2.36 0.093 5.59 0.220 4 5.43 31.000 N
LW 044 04 0275S 2.77 0.109 6.99 0.275 5 4.20 24.000 P
LW 044 04 0330S 3.63 0.143 8.38 0.330 6 3.68 21.000 Q
LW 044 04 0385S 4.06 0.160 9.78 0.385 7 3.15 18.000 Q
LW 044 04 0440S 4.95 0.195 11.18 0.440 8 2.80 16.000 Q
LW 044 04 0495S 5.33 0.210 12.57 0.495 9 2.45 14.000 R
LW 044 04 0550S 6.10 0.240 13.97 0.550 10 2.28 13.000 S
LW 044 04 0605S 6.60 0.260 15.37 0.605 11 2.10 12.000 T
LW 044 08 0165S 11.10 0.437 7.14 0.281 35.59 8.00 2.08 0.082 4.19 0.165 0.28 x 1.17 0.011 x 0.046 3 2.5 16.81 96.000 M
LW 044 08 0220S 2.92 0.115 5.59 0.220 4 13.31 76.000 N
LW 044 08 0275S 3.61 0.142 6.99 0.275 5 10.51 60.000 Q
LW 044 08 0330S 4.55 0.179 8.38 0.330 6 9.28 53.000 R
LW 044 08 0385S 5.03 0.198 9.78 0.385 7 7.53 43.000 R
LW 044 08 0440S 5.87 0.231 11.18 0.440 8 6.65 38.000 R
LW 044 08 0495S 6.48 0.255 12.57 0.495 9 5.78 33.000 T
LW 044 08 0550S 7.37 0.290 13.97 0.550 10 5.43 31.000 T
LW 044 08 0605S 8.10 0.319 15.37 0.605 11 4.90 28.000 X
LWM12 020 0434S 12.00 0.472 9.00 0.354 20.00 4.50 1.47 0.058 4.34 0.171 0.20 x 1.02 0.008 x 0.040 3 2.5 6.97 39.800 M
LWM12 020 0579S 1.98 0.078 5.79 0.228 4 5.25 29.980 N
LWM12 020 0724S 2.46 0.097 7.24 0.285 5 4.19 23.920 Q
LWM12 020 0869S 2.95 0.116 8.69 0.342 6 3.48 19.870 R
LWM12 020 1013S 3.45 0.136 10.13 0.399 7 2.99 17.070 R
LWM12 020 1158S 3.94 0.155 11.58 0.456 8 2.62 14.960 S
LWM12 020 1303S 4.45 0.175 13.03 0.513 9 2.33 13.300 T
LWM12 020 1448S 4.93 0.194 14.48 0.570 10 2.09 11.930 Y
LWM12 020 1593S 5.44 0.214 15.93 0.627 11 1.91 10.910 Z
LWM12 040 0434S 12.00 0.472 8.50 0.335 40.00 8.99 2.36 0.093 4.34 0.171 0.28 x 1.17 0.011 x 0.046 3 2.5 20.19 115.280 M
LWM12 040 0579S 3.18 0.125 5.79 0.228 4 15.29 87.300 N
LWM12 040 0724S 3.96 0.156 7.24 0.285 5 12.21 69.720 Q
LWM12 040 0869S 4.75 0.187 8.69 0.342 6 10.16 58.010 R
LWM12 040 1013S 5.54 0.218 10.13 0.399 7 8.70 49.680 R
LWM12 040 1158S 6.32 0.249 11.58 0.456 8 7.61 43.450 S
LWM12 040 1303S 7.11 0.280 13.03 0.513 9 6.76 38.600 T
LWM12 040 1448S 7.92 0.312 14.48 0.570 10 6.10 34.830 Y
LWM12 040 1593S 8.71 0.343 15.93 0.627 11 5.55 31.690 Z
LWM12 060 0434S 12.00 0.472 8.50 0.335 60.00 13.49 1.98 0.078 4.34 0.171 0.30 x 1.14 0.012 x 0.045 3 2.5 25.40 145.030 P
LWM12 060 0579S 2.64 0.104 5.79 0.228 4 19.05 108.770 R
LWM12 060 0724S 3.30 0.130 7.24 0.285 5 15.24 87.020 S
LWM12 060 0869S 3.99 0.157 8.69 0.342 6 12.77 72.920 T
LWM12 060 1013S 4.65 0.183 10.13 0.399 7 10.94 62.470 U
LWM12 060 1158S 5.31 0.209 11.58 0.456 8 9.56 54.590 V
LWM12 060 1303S 5.97 0.235 13.03 0.513 9 8.50 48.530 X
LWM12 060 1448S 6.63 0.261 14.48 0.570 10 7.64 43.620 Z
LWM12 060 1593S 7.29 0.287 15.93 0.627 11 6.95 39.680 BA
LW 050 05 0180S 12.70 0.500 7.92 0.312 22.24 5.00 1.57 0.062 4.57 0.180 0.20 x 1.42 0.008 x 0.056 3 2.5 7.36 42.000 M
LW 050 05 0240S 2.29 0.090 6.10 0.240 4 5.78 33.000 N
LW 050 05 0300S 2.72 0.107 7.62 0.300 5 4.55 26.000 Q
LW 050 05 0360S 3.45 0.136 9.14 0.360 6 3.85 22.000 R
LW 050 05 0420S 3.81 0.150 10.67 0.420 7 3.33 19.000 R
LW 050 05 0480S 4.57 0.180 12.19 0.480 8 2.98 17.000 T
LW 050 05 0540S 4.95 0.195 13.72 0.540 9 2.45 14.000 V
LW 050 05 0600S 5.59 0.220 15.24 0.600 10 2.28 13.000 Z
LW 050 05 0660S 6.10 0.240 16.76 0.660 11 2.10 12.000 Z
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 127
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LW 050 10 0180S 12.70 0.500 7.92 0.312 44.48 10.00 1.65 0.065 4.57 0.180 0.25 x 1.47 0.010 x 0.058 3 2.5 15.24 87.000 N
LW 050 10 0240S 2.34 0.092 6.10 0.240 4 11.91 68.000 Q
LW 050 10 0300S 2.90 0.114 7.62 0.300 5 9.46 54.000 R
LW 050 10 0360S 3.73 0.147 9.14 0.360 6 8.23 47.000 S
LW 050 10 0420S 4.11 0.162 10.67 0.420 7 6.83 39.000 T
LW 050 10 0480S 4.98 0.196 12.19 0.480 8 6.13 35.000 W
LW 050 10 0540S 5.26 0.207 13.72 0.540 9 5.25 30.000 Y
LW 050 10 0600S 6.25 0.246 15.24 0.600 10 4.90 28.000 Z
LW 050 10 0660S 6.71 0.264 16.76 0.660 11 4.38 25.000 Z
LW 050 15 0180S 12.70 0.500 7.92 0.312 66.72 15.00 1.91 0.075 4.57 0.180 0.30 x 1.52 0.012 x 0.060 3 2.5 25.04 143.000 P
LW 050 15 0240S 2.79 0.110 6.10 0.240 4 20.14 115.000 R
LW 050 15 0300S 3.45 0.136 7.62 0.300 5 15.94 91.000 S
LW 050 15 0360S 4.24 0.167 9.14 0.360 6 13.66 78.000 T
LW 050 15 0420S 4.62 0.182 10.67 0.420 7 11.03 63.000 V
LW 050 15 0480S 5.49 0.216 12.19 0.480 8 9.98 57.000 X
LW 050 15 0540S 6.10 0.240 13.72 0.540 9 8.76 50.000 X
LW 050 15 0600S 7.11 0.280 15.24 0.600 10 8.23 47.000 BC
LW 050 15 0660S 7.92 0.312 16.76 0.660 11 7.53 43.000 BA
LWM14 022 0495S 14.00 0.551 10.00 0.394 22.00 4.95 2.18 0.086 4.95 0.195 0.23 x 1.47 0.009 x 0.058 3 2.5 7.95 45.390 P
LWM14 022 0660S 2.95 0.116 6.60 0.260 4 6.01 34.320 P
LWM14 022 0826S 3.71 0.146 8.26 0.325 5 4.84 27.640 R
LWM14 022 0991S 4.52 0.178 9.91 0.390 6 4.09 23.350 S
LWM14 022 1156S 5.33 0.210 11.56 0.455 7 3.54 20.210 V
LWM14 022 1321S 6.17 0.243 13.21 0.520 8 3.13 17.870 W
LWM14 022 1486S 7.01 0.276 14.86 0.585 9 2.80 15.990 X
LWM14 022 1651S 7.85 0.309 16.51 0.650 10 2.54 14.500 Z
LWM14 022 1816S 8.71 0.343 18.16 0.715 11 2.33 13.300 Z
LWM14 050 0495S 14.00 0.551 10.00 0.394 50.00 11.24 2.18 0.086 4.95 0.195 0.30 x 1.52 0.012 x 0.060 3 2.5 18.06 103.120 Q
LWM14 050 0660S 2.95 0.116 6.60 0.260 4 13.67 78.050 R
LWM14 050 0826S 3.71 0.146 8.26 0.325 5 11.00 62.810 V
LWM14 050 0991S 4.52 0.178 9.91 0.390 6 9.29 53.040 V
LWM14 050 1156S 5.33 0.210 11.56 0.455 7 8.03 45.850 X
LWM14 050 1321S 6.17 0.243 13.21 0.520 8 7.11 40.600 Z
LWM14 050 1486S 7.01 0.276 14.86 0.585 9 6.37 36.370 Z
LWM14 050 1651S 7.85 0.309 16.51 0.650 10 5.77 32.950 BC
LWM14 050 1816S 8.71 0.343 18.16 0.715 11 5.29 30.210 BD
LWM14 080 0495S 14.00 0.551 9.00 0.354 80.00 17.98 3.15 0.124 4.95 0.195 0.38 x 1.52 0.015 x 0.060 3 2.5 44.36 253.290 Q
LWM14 080 0660S 4.19 0.165 6.60 0.260 4 33.15 189.280 R
LWM14 080 0826S 5.26 0.207 8.26 0.325 5 26.69 152.400 V
LWM14 080 0991S 6.30 0.248 9.91 0.390 6 22.18 126.650 V
LWM14 080 1156S 7.34 0.289 11.56 0.455 7 18.97 108.320 X
LWM14 080 1321S 8.41 0.331 13.21 0.520 8 16.66 95.130 Z
LWM14 080 1486S 9.45 0.372 14.86 0.585 9 14.79 84.450 Z
LWM14 080 1651S 10.49 0.413 16.51 0.650 10 13.29 75.880 BC
LWM14 080 1816S 11.56 0.455 18.16 0.715 11 12.11 69.150 BD
LW 056 05 0195S 14.27 0.562 9.53 0.375 22.24 5.00 2.03 0.080 4.95 0.195 0.23 x 1.47 0.009 x 0.058 3 2.5 7.53 43.000 P
LW 056 05 0260S 3.18 0.125 6.60 0.260 4 6.48 37.000 P
LW 056 05 0325S 3.43 0.135 8.26 0.325 5 4.55 26.000 P
LW 056 05 0390S 4.57 0.180 9.91 0.390 6 4.20 24.000 S
LW 056 05 0455S 4.83 0.190 11.56 0.455 7 3.33 19.000 V
LW 056 05 0520S 5.84 0.230 13.21 0.520 8 2.98 17.000 W
LW 056 05 0585S 6.60 0.260 14.86 0.585 9 2.63 15.000 Y
LW 056 05 0650S 7.24 0.285 16.51 0.650 10 2.45 14.000 Z
LW 056 05 0715S 8.00 0.315 18.16 0.715 11 2.28 13.000 Z
128 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LW 056 11 0195S 14.27 0.562 9.53
0.375 48.93 11.00 2.18 0.086 4.95 0.195 0.30 x 1.52 0.012 x 0.060 3 2.5 17.69 101.000 P
LW 056 11 0260S 3.12 0.123 6.60 0.260 4 14.01 80.000 P
LW 056 11 0325S 3.68 0.145 8.26 0.325 5 10.68 61.000 P
LW 056 11 0390S 4.75 0.187 9.91 0.390 6 9.46 54.000 S
LW 056 11 0455S 5.31 0.209 11.56 0.455 7 7.88 45.000 V
LW 056 11 0520S 6.43 0.253 13.21 0.520 8 7.18 41.000 W
LW 056 11 0585S 6.93 0.273 14.86 0.585 9 6.13 35.000 Y
LW 056 11 0650S 8.08 0.318 16.51 0.650 10 5.78 33.000 Z
LW 056 11 0715S 8.71 0.343 18.16 0.715 11 5.25 30.000 BA
LW 056 18 0195S 14.27 0.562 9.53 0.375 80.07 18.00 2.36 0.093 4.95 0.195 0.38 x 1.52 0.015 x 0.060 3 2.5 30.82 176.000 Q
LW 056 18 0260S 3.45 0.136 6.60 0.260 4 25.39 145.000 R
LW 056 18 0325S 4.19 0.165 8.26 0.325 5 19.79 113.000 V
LW 056 18 0390S 5.38 0.212 9.91 0.390 6 17.69 101.000 V
LW 056 18 0455S 6.22 0.245 11.56 0.455 7 15.06 86.000 X
LW 056 18 0520S 7.16 0.282 13.21 0.520 8 13.31 76.000 Z
LW 056 18 0585S 8.20 0.323 14.86 0.585 9 12.08 69.000 Z
LW 056 18 0650S 9.14 0.360 16.51 0.650 10 10.86 62.000 BC
LW 056 18 0715S 10.36 0.408 18.16 0.715 11 10.33 59.000 BD
LWM15 025 0518S 15.00 0.591 11.00 0.433 25.00 5.62 2.57 0.101 5.18 0.204 0.25 x 1.47 0.010 x 0.058 3 2.5 9.56 54.590 T
LWM15 025 0691S 3.43 0.135 6.91 0.272 4 7.18 41.000 U
LWM15 025 0864S 4.27 0.168 8.64 0.340 5 5.72 32.660 W
LWM15 025 1036S 5.13 0.202 10.36 0.408 6 4.78 27.290 Y
LWM15 025 1209S 5.99 0.236 12.09 0.476 7 4.10 23.410 Z
LWM15 025 1382S 6.83 0.269 13.82 0.544 8 3.58 20.440 Z
LWM15 025 1554S 7.70 0.303 15.54 0.612 9 3.19 18.210 Z
LWM15 025 1727S 8.53 0.336 17.27 0.680 10 2.86 16.330 BA
LWM15 025 1900S 9.40 0.370 19.00 0.748 11 2.60 14.850 BB
LWM15 050 0518S 15.00 0.591 10.00 0.394 50.00 11.24 3.43 0.135 5.18 0.204 0.23 x 1.47 0.009 x 0.058 3 3.5 28.53 162.900 T
LWM15 050 0691S 4.57 0.180 6.91 0.272 4 21.40 122.190 U
LWM15 050 0864S 5.72 0.225 8.64 0.340 5 17.12 97.750 W
LWM15 050 1036S 6.86 0.270 10.36 0.408 6 14.26 81.420 Y
LWM15 050 1209S 8.00 0.315 12.09 0.476 7 12.23 69.830 Z
LWM15 050 1382S 9.14 0.360 13.82 0.544 8 10.70 61.100 Z
LWM15 050 1554S 10.29 0.405 15.54 0.612 9 9.51 54.300 Z
LWM15 050 1727S 11.43 0.450 17.27 0.680 10 8.56 48.880 BA
LWM15 050 1900S 12.57 0.495 19.00 0.748 11 7.78 44.420 BB
LWM15 080 0518S 15.00 0.591 10.00 0.394 80.00 17.98 3.20 0.126 5.18 0.204 0.25 x 1.47 0.010 x 0.058 3 3.5 40.38 230.570 W
LWM15 080 0691S 4.19 0.165 6.91 0.272 4 29.44 168.100 X
LWM15 080 0864S 5.23 0.206 8.64 0.340 5 23.50 134.180 Y
LWM15 080 1036S 6.27 0.247 10.36 0.408 6 19.56 111.690 Z
LWM15 080 1209S 7.32 0.288 12.09 0.476 7 16.75 95.640 BB
LWM15 080 1382S 8.36 0.329 13.82 0.544 8 14.65 83.650 BC
LWM15 080 1554S 9.40 0.370 15.54 0.612 9 13.01 74.290 BC
LWM15 080 1727S 10.46 0.412 17.27 0.680 10 11.75 67.090 BD
LWM15 080 1900S 11.51 0.453 19.00 0.748 11 10.68 60.980 BE
LW 063 06 0180S 15.88 0.625 11.43 0.450 26.69 6.00 1.40 0.055 4.57 0.180 0.25 x 1.47 0.010 x 0.058 3 2.5 8.41 48.000 S
LW 063 06 0240S 1.73 0.068 6.10 0.240 4 6.13 35.000 T
LW 063 06 0300S 2.16 0.085 7.62 0.300 5 4.90 28.000 W
LW 063 06 0360S 2.69 0.106 9.14 0.360 6 4.20 24.000 Y
LW 063 06 0420S 3.25 0.128 10.67 0.420 7 3.68 21.000 Z
LW 063 06 0540S 4.19 0.165 13.72 0.540 9 2.80 16.000 Z
LW 063 06 0660S 5.13 0.202 16.76 0.660 11 2.28 13.000 Z
LW 063 06 0780S 6.05 0.238 19.81 0.780 13 1.93 11.000 BB
LW 063 12 0180S 15.88 0.625 11.43 0.450 53.38 12.00 2.64 0.104 4.57 0.180 0.25 x 1.47 0.010 x 0.058 3 3.5 27.67 158.000 T
LW 063 12 0240S 3.30 0.130 6.10 0.240 4 19.09 109.000 V
LW 063 12 0300S 4.45 0.175 7.62 0.300 5 16.81 96.000 W
LW 063 12 0360S 5.23 0.206 9.14 0.360 6 13.66 78.000 X
LW 063 12 0420S 6.25 0.246 10.67 0.420 7 12.08 69.000 Y
LW 063 12 0540S 8.05 0.317 13.72 0.540 9 9.46 54.000 Z
LW 063 12 0660S 9.80 0.386 16.76 0.660 11 7.71 44.000 BA
LW 063 12 0780S 11.53 0.454 19.81 0.780 13 6.48 37.000 BA
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 129
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LW 063 20 0180S 15.88 0.625 11.43
0.450 88.96 20.00 2.59 0.102 4.57 0.180 0.30 x 1.52 0.012 x 0.060 3 3.5 44.83 256.000 V
LW 063 20 0240S 3.43 0.135 6.10 0.240 4 33.27 190.000 W
LW 063 20 0300S 4.45 0.175 7.62 0.300 5 28.02 160.000 Y
LW 063 20 0360S 5.21 0.205 9.14 0.360 6 22.59 129.000 Y
LW 063 20 0420S 6.22 0.245 10.67 0.420 7 19.96 114.000 Z
LW 063 20 0540S 8.00 0.315 13.72 0.540 9 15.59 89.000 BC
LW 063 20 0660S 9.91 0.390 16.76 0.660 11 12.96 74.000 BC
LW 063 20 0780S 11.81 0.465 19.81 0.780 13 11.03 63.000 BE
LWM16 025 0541S 16.00 0.630 11.00 0.433 25.00 5.62 2.11 0.083 5.41 0.213 0.25 x 1.47 0.010 x 0.058 3 2.5 7.57 43.220 T
LWM16 025 0721S 2.79 0.110 7.21 0.284 4 5.66 32.320 U
LWM16 025 0902S 3.51 0.138 9.02 0.355 5 4.54 25.920 W
LWM16 025 1082S 4.19 0.165 10.82 0.426 6 3.77 21.530 Z
LWM16 025 1262S 4.90 0.193 12.62 0.497 7 3.24 18.500 Z
LWM16 025 1623S 6.30 0.248 16.23 0.639 9 2.52 14.390 Z
LWM16 025 1984S 7.70 0.303 19.84 0.781 11 2.06 11.760 BB
LWM16 025 2344S 9.09 0.358 23.44 0.923 13 1.74 9.940 BC
LWM16 055 0541S 16.00 0.630 11.00 0.433 55.00 12.36 3.63 0.143 5.41 0.213 0.25 x 1.47 0.010 x 0.058 3 3.5 30.93 176.610 U
LWM16 055 0721S 4.83 0.190 7.21 0.284 4 23.04 131.560 W
LWM16 055 0902S 6.05 0.238 9.02 0.355 5 18.51 105.690 X
LWM16 055 1082S 7.24 0.285 10.82 0.426 6 15.36 87.700 Y
LWM16 055 1262S 8.46 0.333 12.62 0.497 7 13.20 75.370 Z
LWM16 055 1623S 10.87 0.428 16.23 0.639 9 10.26 58.580 BA
LWM16 055 1984S 13.28 0.523 19.84 0.781 11 8.39 47.910 BA
LWM16 055 2344S 15.70 0.618 23.44 0.923 13 7.10 40.540 BB
LWM16 090 0541S 16.00 0.630 11.00 0.433 90.00 20.23 3.30 0.130 5.41 0.213 0.30 x 1.52 0.012 x 0.060 3 3.5 42.69 243.760 V
LWM16 090 0721S 4.57 0.180 7.21 0.284 4 34.07 194.540 X
LWM16 090 0902S 5.59 0.220 9.02 0.355 5 26.25 149.880 Y
LWM16 090 1082S 6.86 0.270 10.82 0.426 6 22.71 129.670 Z
LWM16 090 1262S 7.87 0.310 12.62 0.497 7 18.95 108.200 BA
LWM16 090 1623S 10.16 0.400 16.23 0.639 9 14.83 84.680 BC
LWM16 090 1984S 12.45 0.490 19.84 0.781 11 12.18 69.550 BC
LWM16 090 2344S 14.73 0.580 23.44 0.923 13 10.33 58.980 BE
LWM18 030 0572S 18.00 0.709 13.00 0.512 30.00 6.74 3.63 0.143 5.72 0.225 0.20 x 1.80 0.008 x 0.071 3 3.5 14.40 82.220 S
LWM18 030 0762S 4.75 0.187 7.62 0.300 4 10.45 59.670 S
LWM18 030 0953S 5.94 0.234 9.53 0.375 5 8.38 47.850 T
LWM18 030 1143S 7.14 0.281 11.43 0.450 6 6.99 39.910 T
LWM18 030 1334S 8.31 0.327 13.34 0.525 7 5.97 34.090 U
LWM18 030 1715S 10.69 0.421 17.15 0.675 9 4.65 26.550 Y
LWM18 030 2286S 14.25 0.561 22.86 0.900 12 3.48 19.870 Z
LWM18 055 0572S 18.00 0.709 13.00 0.512 55.00 12.36 3.68 0.145 5.72 0.225 0.25 x 1.83 0.010 x 0.072 3 3.5 27.07 154.570 T
LWM18 055 0762S 4.98 0.196 7.62 0.300 4 20.82 118.880 T
LWM18 055 0953S 6.22 0.245 9.53 0.375 5 16.66 95.130 U
LWM18 055 1143S 7.47 0.294 11.43 0.450 6 13.88 79.250 U
LWM18 055 1334S 8.74 0.344 13.34 0.525 7 11.96 68.290 V
LWM18 055 1715S 11.23 0.442 17.15 0.675 9 9.29 53.040 X
LWM18 055 2286S 14.96 0.589 22.86 0.900 12 6.96 39.740 BA
LWM18 090 0572S 18.00 0.709 13.00 0.512 90.00 20.23 3.84 0.151 5.72 0.225 0.30 x 1.83 0.012 x 0.072 3 3.5 47.88 273.390 V
LWM18 090 0762S 5.13 0.202 7.62 0.300 4 36.16 206.470 W
LWM18 090 0953S 6.40 0.252 9.53 0.375 5 28.81 164.500 X
LWM18 090 1143S 7.70 0.303 11.43 0.450 6 24.10 137.610 Y
LWM18 090 1334S 8.97 0.353 13.34 0.525 7 20.60 117.620 BA
LWM18 090 1715S 11.53 0.454 17.15 0.675 9 16.03 91.530 BC
LWM18 090 2286S 15.37 0.605 22.86 0.900 12 12.01 68.580 BD
LW 075 07 0250S 19.05 0.750 13.97 0.550 31.14 7.00 3.61 0.142 6.35 0.250 0.20 x 1.8 0.008 x 0.071 3 3.5 11.38 65.000 R
LW 075 07 0333S 4.75 0.187 8.46 0.333 4 8.41 48.000 S
LW 075 07 0417S 6.25 0.246 10.59 0.417 5 7.18 41.000 S
LW 075 07 0500S 7.24 0.285 12.70 0.500 6 5.78 33.000 T
LW 075 07 0583S 8.84 0.348 14.81 0.583 7 5.25 30.000 T
LW 075 07 0750S 11.33 0.446 19.05 0.750 9 4.03 23.000 Z
LW 075 07 1000S 14.73 0.580 25.40 1.000 12 2.98 17.000 BB
130 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LW 075 13 0250S 19.05 0.750 13.97 0.550 57.83 13.00 4.04 0.159 6.35 0.250 0.25 x 1.98 0.010 x 0.078 3 3.5 25.04 143.000 T
LW 075 13 0333S 5.16 0.203 8.46 0.333 4 17.51 100.000 T
LW 075 13 0417S 6.86 0.270 10.59 0.417 5 15.41 88.000 X
LW 075 13 0500S 7.98 0.314 12.70 0.500 6 12.26 70.000 Z
LW 075 13 0583S 9.68 0.381 14.81 0.583 7 11.21 64.000 BA
LW 075 13 0750S 12.42 0.489 19.05 0.750 9 8.76 50.000 BB
LW 075 13 1000S 16.48 0.649 25.40 1.000 12 6.48 37.000 BD
LW 075 22 0250S 19.05 0.750 13.97 0.550 97.86 22.00 4.29 0.169 6.35 0.250 0.33 x 2.01 0.013 x 0.079 3 3.5 47.63 272.000 V
LW 075 22 0333S 5.46 0.215 8.46 0.333 4 32.57 186.000 X
LW 075 22 0417S 7.39 0.291 10.59 0.417 5 30.65 175.000 Y
LW 075 22 0500S 8.51 0.335 12.70 0.500 6 23.29 133.000 BA
LW 075 22 0583S 10.29 0.405 14.81 0.583 7 21.72 124.000 BB
LW 075 22 0750S 13.36 0.526 19.05 0.750 9 17.16 98.000 BD
LW 075 22 1000S 17.75 0.699 25.40 1.000 12 12.78 73.000 BE
LWM20 035 0632S 20.00 0.787 15.00 0.591 35.00 7.87 2.72 0.107 6.32 0.249 0.20 x 1.80 0.008 x 0.071 3 3.5 9.70 55.390 T
LWM20 035 0843S 3.61 0.142 8.43 0.332 4 7.25 41.400 T
LWM20 035 1054S 4.52 0.178 10.54 0.415 5 5.81 33.170 U
LWM20 035 1265S 5.41 0.213 12.65 0.498 6 4.83 27.580 U
LWM20 035 1476S 6.32 0.249 14.76 0.581 7 4.15 23.700 U
LWM20 035 1897S 8.13 0.320 18.97 0.747 9 3.23 18.440 Z
LWM20 035 2530S 10.82 0.426 25.30 0.996 12 2.42 13.820 BB
LWM20 070 0632S 20.00 0.787 14.00 0.551 70.00 15.74 3.05 0.120 6.32 0.249 0.25 x 1.98 0.010 x 0.078 3 3.5 21.36 121.960 U
LWM20 070 0843S 4.06 0.160 8.43 0.332 4 16.02 91.470 V
LWM20 070 1054S 5.08 0.200 10.54 0.415 5 12.82 73.200 X
LWM20 070 1265S 6.27 0.247 12.65 0.498 6 10.98 62.690 Z
LWM20 070 1476S 7.32 0.288 14.76 0.581 7 9.41 53.730 BA
LWM20 070 1897S 9.17 0.361 18.97 0.747 9 7.14 40.770 BB
LWM20 070 2530S 12.22 0.481 25.30 0.996 12 5.35 30.550 BD
LWM20 100 0632S 20.00 0.787 14.00 0.551 100.00 22.48 4.24 0.167 6.32 0.249 0.33 x 2.01 0.013 x 0.079 3 3.5 48.01 274.130 V
LWM20 100 0843S 5.66 0.223 8.43 0.332 4 36.12 206.240 X
LWM20 100 1054S 7.06 0.278 10.54 0.415 5 28.74 164.100 Y
LWM20 100 1265S 8.48 0.334 12.65 0.498 6 24.01 137.090 Z
LWM20 100 1476S 9.91 0.390 14.76 0.581 7 20.61 117.680 BB
LWM20 100 1897S 12.73 0.501 18.97 0.747 9 16.00 91.360 BD
LWM20 100 2530S 16.97 0.668 25.30 0.996 12 12.00 68.520 BE
LW 088 12 0250S 22.23 0.875 15.24 0.600 53.38 12.00 2.97 0.117 6.35 0.250 0.25 x 2.18 0.010 x 0.086 3 3.5 15.76 90.000 S
LW 088 12 0333S 4.01 0.158 8.46 0.333 4 12.08 69.000 X
LW 088 12 0417S 5.26 0.207 10.59 0.417 5 9.98 57.000 X
LW 088 12 0500S 6.15 0.242 12.70 0.500 6 8.23 47.000 Y
LW 088 12 0583S 7.29 0.287 14.81 0.583 7 7.18 41.000 Z
LW 088 12 0750S 9.60 0.378 19.05 0.750 9 5.60 32.000 BC
LW 088 12 1000S 12.65 0.498 25.40 1.000 12 4.20 24.000 BC
LW 088 18 0250S 22.23 0.875 15.24 0.600 80.07 18.00 3.15 0.124 6.35 0.250 0.20 x 2.39 0.012 x 0.094 3 3.5 25.92 148.000 T
LW 088 18 0333S 4.17 0.164 8.46 0.333 4 18.91 108.000 V
LW 088 18 0417S 5.44 0.214 10.59 0.417 5 15.59 89.000 X
LW 088 18 0500S 6.40 0.252 12.70 0.500 6 13.31 76.000 X
LW 088 18 0583S 7.52 0.296 14.81 0.583 7 11.56 66.000 X
LW 088 18 0750S 9.78 0.385 19.05 0.750 9 8.76 50.000 X
LW 088 18 1000S 12.93 0.509 25.40 1.000 12 6.65 38.000 Z
LW 088 25 0250S 22.23 0.875 15.24 0.600 111.21 25.00 4.22 0.166 6.35 0.250 0.68 x 2.39 0.015 x 0.094 3 3.5 52.19 298.000 V
LW 088 25 0333S 5.44 0.214 8.46 0.333 4 36.78 210.000 Y
LW 088 25 0417S 7.06 0.278 10.59 0.417 5 31.52 180.000 Y
LW 088 25 0500S 8.31 0.327 12.70 0.500 6 25.39 145.000 Z
LW 088 25 0583S 10.03 0.395 14.81 0.583 7 23.29 133.000 Z
LW 088 25 0750S 12.95 0.510 19.05 0.750 9 18.21 104.000 BC
LW 088 25 1000S 17.02 0.670 25.40 1.000 12 13.66 78.000 BC
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 131
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LWM25 050 0663S 25.00 0.984 19.00 0.748 50.00 11.24 2.06 0.081 6.63 0.261 0.25 x 2.18 0.010 x 0.086 3 3.5 10.94 62.470 T
LWM25 050 0884S 2.74 0.108 8.84 0.348 4 8.20 46.820 V
LWM25 050 1105S 3.43 0.135 11.05 0.435 5 6.56 37.460 X
LWM25 050 1326S 4.11 0.162 13.26 0.522 6 5.47 31.230 Y
LWM25 050 1547S 4.80 0.189 15.47 0.609 7 4.69 26.780 Y
LWM25 050 1989S 6.20 0.244 19.89 0.783 9 3.65 20.840 Z
LWM25 050 2652S 8.26 0.325 26.52 1.044 12 2.74 15.650 BD
LWM25 080 0663S 25.00 0.984 19.00 0.748 80.00 17.98 2.95 0.116 6.63 0.261 0.30 x 2.39 0.012 x 0.094 3 3.5 21.72 124.020 U
LWM25 080 0884S 3.94 0.155 8.84 0.348 4 16.32 93.190 V
LWM25 080 1105S 4.90 0.193 11.05 0.435 5 13.01 74.290 X
LWM25 080 1326S 5.89 0.232 13.26 0.522 6 10.86 62.010 Y
LWM25 080 1547S 6.88 0.271 15.47 0.609 7 9.32 53.220 Z
LWM25 080 1989S 8.84 0.348 19.89 0.783 9 7.24 41.340 BA
LWM25 080 2652S 11.79 0.464 26.52 1.044 12 5.43 31.000 BD
LWM25 110 0663S 25.00 0.984 19.00 0.748 110.00 24.73 4.04 0.159 6.63 0.261 0.38 x 2.39 0.015 x 0.094 3 3.5 42.46 242.440 V
LWM25 110 0884S 5.38 0.212 8.84 0.348 4 31.84 181.800 W
LWM25 110 1105S 6.73 0.265 11.05 0.435 5 25.47 145.430 Y
LWM25 110 1326S 8.08 0.318 13.26 0.522 6 21.23 121.220 Z
LWM25 110 1547S 9.40 0.370 15.47 0.609 7 18.12 103.460 BC
LWM25 110 1989S 12.12 0.477 19.89 0.783 9 14.15 80.800 BE
LWM25 110 2652S 16.15 0.636 26.52 1.044 12 10.61 60.580 BF
LW 100 12 0250S 25.40 1.000 18.54 0.730 53.38 12.00 2.13 0.084 6.35 0.250 0.25 x 2.18 0.010 x 0.086 3 3.5 12.61 72.000 S
LW 100 12 0333S 2.74 0.108 8.46 0.333 4 9.28 53.000 V
LW 100 12 0417S 3.68 0.145 10.59 0.417 5 7.71 44.000 W
LW 100 12 0500S 4.19 0.165 12.70 0.500 6 6.30 36.000 X
LW 100 12 0583S 5.11 0.201 14.81 0.583 7 5.43 31.000 Y
LW 100 12 0750S 6.55 0.258 19.05 0.750 9 4.20 24.000 Y
LW 100 12 1000S 8.69 0.342 25.40 1.000 12 3.15 18.000 BB
LW 100 12 1250S 11.30 0.445 31.75 1.250 15 2.63 15.000 BE
LW 100 12 1500S 13.18 0.519 38.10 1.500 18 2.10 12.000 BG
LW 100 12 1750S 16.08 0.633 44.45 1.750 21 1.93 11.000 BH
LW 100 12 2000S 18.03 0.710 50.80 2.000 24 1.58 9.000 BK
LW 100 18 0250S 25.40 1.000 18.54 0.730 80.07 18.00 2.21 0.087 6.35 0.250 0.30 x 2.39 0.012 x 0.094 3 3.5 19.26 110.000 T
LW 100 18 0333S 2.87 0.113 8.46 0.333 4 14.36 82.000 V
LW 100 18 0417S 3.76 0.148 10.59 0.417 5 11.73 67.000 X
LW 100 18 0500S 4.45 0.175 12.70 0.500 6 9.63 55.000 X
LW 100 18 0583S 5.38 0.212 14.81 0.583 7 8.58 49.000 Y
LW 100 18 0750S 7.01 0.276 19.05 0.750 9 6.66 38.000 BB
LW 100 18 1000S 9.14 0.360 25.40 1.000 12 4.90 28.000 BD
LW 100 18 1250S 11.48 0.452 31.75 1.250 15 4.03 23.000 BE
LW 100 18 1500S 13.94 0.549 38.10 1.500 18 3.33 19.000 BF
LW 100 18 1750S 16.51 0.650 44.45 1.750 21 2.80 16.000 BJ
LW 100 18 2000S 18.29 0.720 50.80 2.000 24 2.45 14.000 BL
LW 100 25 0250S 25.40 1.000 18.54 0.730 111.21 25.00 3.33 0.131 6.35 0.250 0.38 x 2.39 0.015 x 0.094 3 3.5 36.78 210.000 V
LW 100 25 0333S 4.42 0.174 8.46 0.333 4 27.50 157.000 X
LW 100 25 0417S 5.77 0.227 10.59 0.417 5 23.12 132.000 Y
LW 100 25 0500S 6.76 0.266 12.70 0.500 6 18.74 107.000 Z
LW 100 25 0583S 8.10 0.319 14.81 0.583 7 16.64 95.000 BC
LW 100 25 0750S 10.31 0.406 19.05 0.750 9 12.78 73.000 BD
LW 100 25 1000S 13.74 0.541 25.40 1.000 12 9.46 54.000 BF
LW 100 25 1250S 17.48 0.688 31.75 1.250 15 7.88 45.000 BG
LW 100 25 1500S 20.65 0.813 38.10 1.500 18 6.30 36.000 BE
LW 100 25 1750S 24.31 0.957 44.45 1.750 21 5.60 32.000 BH
LW 100 25 2000S 27.51 1.083 50.80 2.000 24 4.73 27.000 BH
132 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LWM28 050 0724S 28.00 1.102 22.00 0.866 50.00 11.24 3.76 0.148 7.24 0.285 0.30 x 2.39 0.012 x 0.094 3 3.5 14.37 82.050 Y
LWM28 050 0965S 5.00 0.197 9.65 0.380 4 10.76 61.440 Y
LWM28 050 1207S 6.27 0.247 12.07 0.475 5 8.63 49.280 Y
LWM28 050 1448S 7.52 0.296 14.48 0.570 6 7.18 41.000 Z
LWM28 050 1689S 8.79 0.346 16.89 0.665 7 6.17 35.230 BA
LWM28 050 1930S 10.03 0.395 19.30 0.760 8 5.39 30.780 BB
LWM28 050 2172S 11.28 0.444 21.72 0.855 9 4.79 27.350 BC
LWM28 050 2654S 13.79 0.543 26.54 1.045 11 3.92 22.380 BE
LWM28 050 3137S 16.31 0.642 31.37 1.235 13 3.32 18.960 BG
LWM28 080 0724S 28.00 1.102 22.00 0.866 80.00 17.98 4.39 0.173 7.24 0.285 0.38 x 2.39 0.015 x 0.094 3 3.5 28.12 160.560 Y
LWM28 080 0965S 5.84 0.230 9.65 0.380 4 21.00 119.910 Z
LWM28 080 1207S 7.32 0.288 12.07 0.475 5 16.84 96.150 Z
LWM28 080 1448S 8.79 0.346 14.48 0.570 6 14.06 80.280 BA
LWM28 080 1689S 10.24 0.403 16.89 0.665 7 12.02 68.630 BB
LWM28 080 1930S 11.71 0.461 19.30 0.760 8 10.53 60.130 BC
LWM28 080 2172S 13.18 0.519 21.72 0.855 9 9.37 53.500 BD
LWM28 080 2654S 16.10 0.634 26.54 1.045 11 7.66 43.740 BF
LWM28 080 3137S 19.02 0.749 31.37 1.235 13 6.48 37.000 BH
LWM28 130 0724S 28.00 1.102 22.00 0.866 130.00 29.23 4.57 0.180 7.24 0.285 0.46 x 2.39 0.018 x 0.094 3 3.5 48.74 278.300 Z
LWM28 130 0965S 6.07 0.239 9.65 0.380 4 36.30 207.270 BA
LWM28 130 1207S 7.59 0.299 12.07 0.475 5 29.08 166.040 BA
LWM28 130 1448S 9.12 0.359 14.48 0.570 6 24.26 138.520 BB
LWM28 130 1689S 10.64 0.419 16.89 0.665 7 20.81 118.820 BC
LWM28 130 1930S 12.17 0.479 19.30 0.760 8 18.21 103.980 BD
LWM28 130 2172S 13.69 0.539 21.72 0.855 9 16.20 92.500 BE
LWM28 130 2654S 16.71 0.658 26.54 1.045 11 13.23 75.540 BG
LWM28 130 3137S 19.76 0.778 31.37 1.235 13 11.20 63.950 BJ
LW 112 12 0300S 28.58 1.125 21.59 0.850 53.38 12.00 3.71 0.146 7.62 0.300 0.30 x 2.39 0.012 x 0.094 3 3.5 13.66 78.000 S
LW 112 12 0400S 4.72 0.186 10.16 0.400 4 9.81 56.000 V
LW 112 12 0500S 6.35 0.250 12.70 0.500 5 8.41 48.000 X
LW 112 12 0600S 7.49 0.295 15.24 0.600 6 6.83 39.000 Y
LW 112 12 0700S 8.74 0.344 17.78 0.700 7 5.95 34.000 Z
LW 112 12 0800S 9.96 0.392 20.32 0.800 8 5.08 29.000 Z
LW 112 12 1000S 12.40 0.488 25.40 1.000 10 4.03 23.000 BA
LW 112 12 1300S 16.74 0.659 33.02 1.300 13 3.33 19.000 BD
LW 112 12 1600S 20.50 0.807 40.64 1.600 16 2.63 15.000 BE
LW 112 12 2000S 25.83 1.017 50.80 2.000 20 2.10 12.000 BH
LW 112 20 0300S 28.58 1.125 21.59 0.850 88.96 20.00 4.06 0.160 7.62 0.300 0.38 x 2.39 0.015 x 0.094 3 3.5 25.04 143.000 V
LW 112 20 0400S 5.13 0.202 10.16 0.400 4 17.69 101.000 W
LW 112 20 0500S 6.86 0.270 12.70 0.500 5 15.24 87.000 X
LW 112 20 0600S 8.08 0.318 15.24 0.600 6 12.43 71.000 Y
LW 112 20 0700S 9.68 0.381 17.78 0.700 7 11.03 63.000 Z
LW 112 20 0800S 10.85 0.427 20.32 0.800 8 9.46 54.000 BA
LW 112 20 1000S 13.61 0.536 25.40 1.000 10 7.53 43.000 BC
LW 112 20 1300S 17.98 0.708 33.02 1.300 13 5.95 34.000 BF
LW 112 20 1600S 21.87 0.861 40.64 1.600 16 4.73 27.000 BJ
LW 112 20 2000S 27.64 1.088 50.80 2.000 20 3.85 22.000 BM
LW 112 30 0300S 28.58 1.125 21.59 0.850 133.45 30.00 4.52 0.178 7.62 0.300 0.46 x 2.39 0.018 x 0.094 3 3.5 43.08 246.000 X
LW 112 30 0400S 5.82 0.229 10.16 0.400 4 30.65 175.000 Y
LW 112 30 0500S 7.70 0.303 12.70 0.500 5 26.62 152.000 BA
LW 112 30 0600S 8.89 0.350 15.24 0.600 6 21.02 120.000 BB
LW 112 30 0700S 10.69 0.421 17.78 0.700 7 18.91 108.000 BD
LW 112 30 0800S 11.94 0.470 20.32 0.800 8 15.94 91.000 BE
LW 112 30 1000S 15.06 0.593 25.40 1.000 10 12.96 74.000 BG
LW 112 30 1300S 19.99 0.787 33.02 1.300 13 10.16 58.000 BH
LW 112 30 1600S 24.28 0.956 40.64 1.600 16 8.23 47.000 BK
LW 112 30 2000S 30.53 1.202 50.80 2.000 20 6.65 38.000 BM
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 133
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LWM30 050 0762S 30.00 1.181 24.00 0.945 50.00 11.24 3.18 0.125 7.62 0.300 0.30 x 2.39 0.012 x 0.094 3 3.5 11.25 64.240 Y
LWM30 050 1016S 4.22 0.166 10.16 0.400 4 8.41 48.020 Y
LWM30 050 1270S 5.28 0.208 12.70 0.500 5 6.74 38.480 Y
LWM30 050 1524S 6.32 0.249 15.24 0.600 6 5.61 32.030 Z
LWM30 050 1778S 7.39 0.291 17.78 0.700 7 4.81 27.460 BA
LWM30 050 2032S 8.43 0.332 20.32 0.800 8 4.21 24.040 BB
LWM30 050 2286S 9.50 0.374 22.86 0.900 9 3.74 21.360 BC
LWM30 050 2794S 11.61 0.457 27.94 1.100 11 3.06 17.470 BE
LWM30 050 3302S 13.72 0.540 33.02 1.300 13 2.59 14.790 BG
LWM30 090 0762S 30.00 1.181 24.00 0.945 90.00 20.23 3.51 0.138 7.62 0.300 0.38 x 2.39 0.015 x 0.094 3 3.5 21.87 124.880 Y
LWM30 090 1016S 4.70 0.185 10.16 0.400 4 16.48 94.100 Z
LWM30 090 1270S 5.87 0.231 12.70 0.500 5 13.17 75.200 Z
LWM30 090 1524S 7.04 0.277 15.24 0.600 6 10.97 62.640 BA
LWM30 090 1778S 8.20 0.323 17.78 0.700 7 9.40 53.670 BB
LWM30 090 2032S 9.37 0.369 20.32 0.800 8 8.22 46.940 BC
LWM30 090 2286S 10.54 0.415 22.86 0.900 9 7.31 41.740 BD
LWM30 090 2794S 12.90 0.508 27.94 1.100 11 5.99 34.200 BF
LWM30 090 3302S 15.24 0.600 33.02 1.300 13 5.06 28.890 BH
LWM30 130 0762S 30.00 1.181 24.00 0.945 130.00 29.23 4.19 0.165 7.62 0.300 0.46 x 2.39 0.018 x 0.094 3 3.5 37.91 216.460 Z
LWM30 130 1016S 5.59 0.220 10.16 0.400 4 28.43 162.330 BA
LWM30 130 1270S 6.99 0.275 12.70 0.500 5 22.75 129.900 BA
LWM30 130 1524S 8.38 0.330 15.24 0.600 6 18.96 108.260 BB
LWM30 130 1778S 9.78 0.385 17.78 0.700 7 16.25 92.790 BC
LWM30 130 2032S 11.18 0.440 20.32 0.800 8 14.22 81.190 BD
LWM30 130 2286S 12.57 0.495 22.86 0.900 9 12.64 72.170 BE
LWM30 130 2794S 15.37 0.605 27.94 1.100 11 10.34 59.040 BG
LWM30 130 3302S 18.16 0.715 33.02 1.300 13 8.75 49.960 BJ
LW 125 12 0300S 31.75 1.250 25.40 1.000 53.38 12.00 2.13 0.084 7.62 0.300 0.30 x 2.39 0.012 x 0.094 3 3.5 9.81 56.000 W
LW 125 12 0400S 2.87 0.113 10.16 0.400 4 7.36 42.000 W
LW 125 12 0500S 3.78 0.149 12.70 0.500 5 5.95 34.000 W
LW 125 12 0600S 4.37 0.172 15.24 0.600 6 4.90 28.000 X
LW 125 12 0700S 5.26 0.207 17.78 0.700 7 4.20 24.000 BC
LW 125 12 0800S 5.77 0.227 20.32 0.800 8 3.68 21.000 Z
LW 125 12 1000S 7.65 0.301 25.40 1.000 10 2.98 17.000 BA
LW 125 12 1300S 10.03 0.395 33.02 1.300 13 2.28 13.000 BA
LW 125 12 1600S 11.86 0.467 40.64 1.600 16 1.93 11.000 BB
LW 125 12 2000S 15.01 0.591 50.80 2.000 20 1.58 9.000 BD
LW 125 20 0300S 31.75 1.250 25.40 1.000 88.96 20.00 3.15 0.124 7.62 0.300 0.38 x 3.29 0.015 x 0.094 3 3.5 19.96 114.000 X
LW 125 20 0400S 4.19 0.165 10.16 0.400 4 14.89 85.000 X
LW 125 20 0500S 5.46 0.215 12.70 0.500 5 12.26 70.000 Y
LW 125 20 0600S 6.43 0.253 15.24 0.600 6 10.16 58.000 Z
LW 125 20 0700S 7.70 0.303 17.78 0.700 7 8.76 50.000 BA
LW 125 20 0800S 8.66 0.341 20.32 0.800 8 7.71 44.000 BA
LW 125 20 1000S 10.85 0.427 25.40 1.000 10 6.13 35.000 BB
LW 125 20 1300S 14.66 0.577 33.02 1.300 13 4.90 28.000 BB
LW 125 20 1600S 17.58 0.692 40.64 1.600 16 3.85 22.000 BF
LW 125 20 2000S 22.00 0.866 50.80 2.000 20 3.15 18.000 BL
LW 125 30 0300S 31.75 1.250 25.40 1.000 133.45 30.00 4.01 0.158 7.62 0.300 0.48 x 2.39 0.019 x 0.094 3 3.5 36.78 210.000 Y
LW 125 30 0400S 5.33 0.210 10.16 0.400 4 27.67 158.000 Y
LW 125 30 0500S 6.91 0.272 12.70 0.500 5 23.12 132.000 Y
LW 125 30 0600S 8.13 0.320 15.24 0.600 6 18.74 107.000 BC
LW 125 30 0700S 9.75 0.384 17.78 0.700 7 16.64 95.000 BB
LW 125 30 0800S 11.00 0.433 20.32 0.800 8 14.36 82.000 BB
LW 125 30 1000S 13.67 0.538 25.40 1.000 10 11.38 65.000 BE
LW 125 30 1300S 18.21 0.717 33.02 1.300 13 8.93 51.000 BH
LW 125 30 1600S 22.30 0.878 40.64 1.600 16 7.36 42.000 BK
LW 125 30 2000S 28.02 1.103 50.80 2.000 20 5.78 33.000 BL
134 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LW 138 15 0300S 34.93 1.375 26.16 1.030 66.72 15.00 1.91 0.075 7.62 0.300 0.30 x 3.01 0.012 x 0.122 3 3.5 11.73 67.000 Y
LW 138 15 0400S 2.51 0.099 10.16 0.400 4 8.76 50.000 Y
LW 138 15 0500S 3.28 0.129 12.70 0.500 5 7.01 40.000 Y
LW 138 15 0600S 3.94 0.155 15.24 0.600 6 5.95 34.000 Z
LW 138 15 0700S 4.55 0.179 17.78 0.700 7 5.08 29.000 BA
LW 138 15 0800S 5.23 0.206 20.32 0.800 8 4.38 25.000 BC
LW 138 15 1000S 6.50 0.256 25.40 1.000 10 3.50 20.000 BE
LW 138 15 1300S 8.66 0.341 33.02 1.300 13 2.80 16.000 BG
LW 138 15 1600S 10.77 0.424 40.64 1.600 16 2.28 13.000 BH
LW 138 15 2000S 13.46 0.530 50.80 2.000 20 1.75 10.000 BK
LW 138 25 0300S 34.93 1.375 26.16 1.030 111.21 25.00 3.61 0.142 7.62 0.300 0.41 x 3.38 0.016 x 0.133 3 3.5 27.67 158.000 Y
LW 138 25 0400S 4.72 0.186 10.16 0.400 4 20.49 117.000 Y
LW 138 25 0500S 6.10 0.240 12.70 0.500 5 16.81 96.000 Y
LW 138 25 0600S 7.14 0.281 15.24 0.600 6 13.66 78.000 BA
LW 138 25 0700S 8.64 0.340 17.78 0.700 7 12.08 69.000 BC
LW 138 25 0800S 9.75 0.384 20.32 0.800 8 10.51 60.000 BD
LW 138 25 1000S 12.34 0.486 25.40 1.000 10 8.58 49.000 BE
LW 138 25 1300S 16.05 0.632 33.02 1.300 13 6.48 37.000 BF
LW 138 25 1600S 20.02 0.788 40.64 1.600 16 5.43 31.000 BH
LW 138 25 2000S 24.94 0.982 50.80 2.000 20 4.38 25.000 BK
LW 138 35 0300S 34.93 1.375 26.16 1.030 155.69 35.00 3.78 0.149 7.62 0.300 0.46 x 3.38 0.018 x 0.133 3 3.5 40.63 232.000 Y
LW 138 35 0400S 4.80 0.189 10.16 0.400 4 29.07 166.000 Z
LW 138 35 0500S 6.27 0.247 12.70 0.500 5 24.17 138.000 Z
LW 138 35 0600S 7.29 0.287 15.24 0.600 6 19.62 112.000 BB
LW 138 35 0700S 8.71 0.343 17.78 0.700 7 17.16 98.000 BC
LW 138 35 0800S 9.91 0.390 20.32 0.800 8 14.89 85.000 BD
LW 138 35 1000S 12.45 0.490 25.40 1.000 10 12.08 69.000 BE
LW 138 35 1300S 16.41 0.646 33.02 1.300 13 9.46 54.000 BG
LW 138 35 1600S 20.14 0.793 40.64 1.600 16 7.53 43.000 BH
LW 138 35 2000S 25.40 1.000 50.80 2.000 20 6.13 35.000 BK
LWM35 070 0838S 35.00 1.378 27.00 1.063 70.00 15.74 3.94 0.155 8.38 0.330 0.36 x 3.18 0.014 x 0.125 3 3.5 15.75 89.930 Z
LWM35 070 1118S 5.23 0.206 11.18 0.440 4 11.78 67.260 Z
LWM35 070 1397S 6.55 0.258 13.97 0.550 5 9.44 53.900 BA
LWM35 070 1676S 7.87 0.310 16.76 0.660 6 7.87 44.940 BB
LWM35 070 1956S 9.17 0.361 19.56 0.770 7 6.74 38.480 BC
LWM35 070 2235S 10.49 0.413 22.35 0.880 8 5.90 33.690 BD
LWM35 070 2515S 11.81 0.465 25.15 0.990 9 5.25 29.980 BE
LWM35 070 3073S 14.43 0.568 30.73 1.210 11 4.29 24.500 BF
LWM35 070 3632S 17.04 0.671 36.32 1.430 13 3.63 20.730 BG
LWM35 110 0838S 35.00 1.378 27.00 1.063 110.00 24.73 4.14 0.163 8.38 0.330 0.41 x 3.38 0.016 x 0.133 3 3.5 25.93 148.060 Z
LWM35 110 1118S 5.51 0.217 11.18 0.440 4 19.42 110.890 Z
LWM35 110 1397S 6.88 0.271 13.97 0.550 5 15.52 88.620 BA
LWM35 110 1676S 8.26 0.325 16.76 0.660 6 12.93 73.830 BB
LWM35 110 1956S 9.63 0.379 19.56 0.770 7 11.08 63.270 BC
LWM35 110 2235S 11.02 0.434 22.35 0.880 8 9.71 55.440 BD
LWM35 110 2515S 12.40 0.488 25.15 0.990 9 8.63 49.280 BE
LWM35 110 3073S 15.14 0.596 30.73 1.210 11 7.05 40.250 BF
LWM35 110 3632S 17.91 0.705 36.32 1.430 13 5.97 34.090 BG
LWM35 160 0838S 35.00 1.378 27.00 1.063 160.00 35.97 4.04 0.159 8.38 0.330 0.46 x 3.38 0.018 x 0.133 3 3.5 36.84 210.350 Z
LWM35 160 1118S 5.38 0.212 11.18 0.440 4 27.63 157.760 Z
LWM35 160 1397S 6.73 0.265 13.97 0.550 5 22.10 126.190 BA
LWM35 160 1676S 8.08 0.318 16.76 0.660 6 18.42 105.180 BB
LWM35 160 1956S 9.42 0.371 19.56 0.770 7 15.79 90.160 BC
LWM35 160 2235S 10.77 0.424 22.35 0.880 8 13.81 78.850 BD
LWM35 160 2515S 12.12 0.477 25.15 0.990 9 12.28 70.120 BDE
LWM35 160 3073S 14.81 0.583 30.73 1.210 11 10.05 57.380 BF
LWM35 160 3632S 17.50 0.689 36.32 1.430 13 8.50 48.530 BG
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 135
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LW 150 20 0300S 38.10 1.500 28.96 1.140 88.96 20.00 3.28 0.129 7.62 0.300 0.41 x 3.38 0.016 x 0.133 3 3.5 20.49 117.000 Y
LW 150 20 0400S 4.17 0.164 10.16 0.400 4 14.89 85.000 Z
LW 150 20 0500S 5.41 0.213 12.70 0.500 5 12.26 70.000 BA
LW 150 20 0600S 6.27 0.247 15.24 0.600 6 9.98 57.000 BB
LW 150 20 0700S 7.65 0.301 17.78 0.700 7 8.76 50.000 BB
LW 150 20 0800S 8.56 0.337 20.32 0.800 8 7.53 43.000 BD
LW 150 20 1000S 10.92 0.430 25.40 1.000 10 6.13 35.000 BE
LW 150 20 1300S 14.35 0.565 33.02 1.300 13 4.73 27.000 BJ
LW 150 20 1600S 17.63 0.694 40.64 1.600 16 3.85 22.000 BM
LW 150 20 2000S 22.00 0.866 50.80 2.000 20 3.15 18.000 BP
LW 150 35 0300S 38.10 1.500 28.96 1.140 155.69 35.00 3.10 0.122 7.62 0.300 0.46 x 3.38 0.018 x 0.133 3 3.5 34.50 197.000 Y
LW 150 35 0400S 4.01 0.158 10.16 0.400 4 25.39 145.000 Z
LW 150 35 0500S 5.23 0.206 12.70 0.500 5 20.84 119.000 BA
LW 150 35 0600S 6.12 0.241 15.24 0.600 6 16.99 97.000 BB
LW 150 35 0700S 7.39 0.291 17.78 0.700 7 15.06 86.000 BB
LW 150 35 0800S 8.23 0.324 20.32 0.800 8 12.96 74.000 BD
LW 150 35 1000S 10.39 0.409 25.40 1.000 10 10.33 59.000 BE
LW 150 35 1300S 13.72 0.540 33.02 1.300 13 8.06 46.000 BJ
LW 150 35 1600S 16.69 0.657 40.64 1.600 16 6.48 37.000 BM
LW 150 35 2000S 21.21 0.835 50.80 2.000 20 5.25 30.000 BQ
LW 150 60 0300S 38.10 1.500 28.96 1.140 266.89 60.00 4.22 0.166 7.62 0.300 0.46 x 3.38 0.018 x 0.133 3 4.5 78.46 448.000 BB
LW 150 60 0400S 5.49 0.216 10.16 0.400 4 57.09 326.000 BB
LW 150 60 0500S 7.06 0.278 12.70 0.500 5 47.28 270.000 BB
LW 150 60 0600S 8.36 0.329 15.24 0.600 6 38.70 221.000 BB
LW 150 60 0700S 9.91 0.390 17.78 0.700 7 33.97 194.000 BB
LW 150 60 0800S 11.25 0.443 20.32 0.800 8 29.42 168.000 BD
LW 150 60 1000S 14.10 0.555 25.40 1.000 10 23.64 135.000 BE
LW 150 60 1300S 18.44 0.726 33.02 1.300 13 18.39 105.000 BJ
LW 150 60 1600S 22.61 0.890 40.64 1.600 16 14.89 85.000 BM
LW 150 60 2000S 28.42 1.119 50.80 2.000 20 11.91 68.000 BQ
LWM40 100 0914S 40.00 1.575 30.00 1.181 100.00 22.48 2.90 0.114 9.14 0.360 0.41 x 3.38 0.016 x 0.133 3 3.5 16.00 91.360 Z
LWM40 100 1219S 3.86 0.152 12.19 0.480 4 12.00 68.520 BA
LWM40 100 1524S 4.80 0.189 15.24 0.600 5 9.58 54.700 BB
LWM40 100 1829S 5.77 0.227 18.29 0.720 6 7.99 45.620 BB
LWM40 100 2134S 6.73 0.265 21.34 0.840 7 6.85 39.110 BC
LWM40 100 2438S 7.70 0.303 24.38 0.960 8 5.99 34.200 BE
LWM40 100 2743S 8.66 0.341 27.43 1.080 9 5.33 30.430 BG
LWM40 100 3353S 10.59 0.417 33.53 1.320 11 4.36 24.900 BJ
LWM40 100 3962S 12.52 0.493 39.62 1.560 13 3.69 21.070 BL
LWM40 150 0914S 40.00 1.575 30.00 1.181 150.00 33.72 5.44 0.214 9.14 0.360 0.53 x 3.63 0.021 x 0.143 3 3.5 40.45 230.970 Z
LWM40 150 1219S 7.24 0.285 12.19 0.480 4 30.28 172.900 BA
LWM40 150 1524S 9.04 0.356 15.24 0.600 5 24.20 138.180 BB
LWM40 150 1829S 10.85 0.427 18.29 0.720 6 20.16 115.110 BB
LWM40 150 2134S 12.65 0.498 21.34 0.840 7 17.27 98.610 BC
LWM40 150 2438S 14.48 0.570 24.38 0.960 8 15.14 86.450 BE
LWM40 150 2743S 16.28 0.641 27.43 1.080 9 13.45 76.800 BG
LWM40 150 3353S 19.89 0.783 33.53 1.320 11 11.00 62.810 BJ
LWM40 150 3962S 23.50 0.925 39.62 1.560 13 9.30 53.100 BL
136 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LWM40 300 0914S 40.00 1.575 30.00 1.181 300.00 67.44 5.66 0.223 9.14 0.360 0.46 x 3.38 0.018 x 0.133 3 4.5 86.21 492.250 BB
LWM40 300 1219S 7.54 0.297 12.19 0.480 4 64.54 368.520 BB
LWM40 300 1524S 9.42 0.371 15.24 0.600 5 51.58 294.520 BB
LWM40 300 1829S 11.33 0.446 18.29 0.720 6 43.11 246.150 BC
LWM40 300 2134S 13.21 0.520 21.34 0.840 7 36.91 210.750 BD
LWM40 300 2438S 15.09 0.594 24.38 0.960 8 32.27 184.260 BD
LWM40 300 2743S 16.97 0.668 27.43 1.080 9 28.67 163.700 BF
LWM40 300 3353S 20.75 0.817 33.53 1.320 11 23.48 134.070 BJ
LWM40 300 3962S 24.54 0.966 39.62 1.560 13 19.88 113.510 BL
LW 175 25 0375S 44.45 1.750 34.04 1.340 111.21 25.00 3.94 0.155 9.53 0.375 0.46 x 3.63 0.018 x 0.143 3 3.5 19.96 114.000 Y
LW 175 25 0500S 5.08 0.200 12.70 0.500 4 14.54 83.000 BA
LW 175 25 0625S 6.73 0.265 15.88 0.625 5 12.08 69.000 BB
LW 175 25 0750S 7.87 0.310 19.05 0.750 6 9.98 57.000 BB
LW 175 25 0870S 9.32 0.367 22.10 0.870 7 8.76 50.000 BB
LW 175 25 1000S 10.54 0.415 25.40 1.000 8 7.53 43.000 BD
LW 175 25 1250S 13.28 0.523 31.75 1.250 10 5.95 34.000 BE
LW 175 25 1500S 16.21 0.638 38.10 1.500 12 5.08 29.000 BJ
LW 175 25 1750S 18.72 0.737 44.45 1.750 14 4.38 25.000 BM
LW 175 25 2000S 21.44 0.844 50.80 2.000 16 3.85 22.000 BQ
LW 175 50 0375S 44.45 1.750 34.04 1.340 222.41 50.00 4.78 0.188 9.53 0.375 0.46 x 3.63 0.018 x 0.143 3 4.5 46.76 267.000 Y
LW 175 50 0500S 6.20 0.244 12.70 0.500 4 34.15 195.000 BA
LW 175 50 0625S 8.00 0.315 15.88 0.625 5 28.20 161.000 BB
LW 175 50 0750S 9.50 0.374 19.05 0.750 6 23.29 133.000 BB
LW 175 50 0870S 11.48 0.452 22.10 0.870 7 21.02 120.000 BB
LW 175 50 1000S 12.83 0.505 25.40 1.000 8 17.69 101.000 BD
LW 175 50 1250S 15.98 0.629 31.75 1.250 10 14.19 81.000 BE
LW 175 50 1500S 19.51 0.768 38.10 1.500 12 11.91 68.000 BJ
LW 175 50 1750S 22.83 0.899 44.45 1.750 14 10.33 59.000 BM
LW 175 50 2000S 26.06 1.026 50.80 2.000 16 8.93 51.000 BQ
LW 175 90 0375S 44.45 1.750 34.04 1.340 400.34 90.00 5.89 0.232 9.53 0.375 0.61 x 3.76 0.024 x 0.148 3 4.5 110.15 629.000 Y
LW 175 90 0500S 7.98 0.314 12.70 0.500 4 84.77 484.000 BA
LW 175 90 0625S 10.39 0.409 15.88 0.625 5 73.03 417.000 BB
LW 175 90 0750S 12.24 0.482 19.05 0.750 6 58.85 336.000 BB
LW 175 90 0870S 14.66 0.577 22.10 0.870 7 53.76 307.000 BB
LW 175 90 1000S 16.54 0.651 25.40 1.000 8 45.18 258.000 BD
LW 175 90 1250S 20.65 0.813 31.75 1.250 10 36.08 206.000 BE
LW 175 90 1500S 24.89 0.980 38.10 1.500 12 30.30 173.000 BJ
LW 175 90 1750S 29.13 1.147 44.45 1.750 14 26.09 149.000 BM
LW 175 90 2000S 33.45 1.317 50.80 2.000 16 23.12 132.000 BQ
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 137
R E D U X ™ Wav e s p r i n g s
● Stainless Steel 17-7 PH
LEE Hole ROD NOMINAL LOAD WORKING HEIGHT FREE HEIGHT WIRE THICKNESS X TURNSWAVES Spring RATE PRICE
STOCK Diameter DIAMETER RADIAL WALL PER GROUP
NUMBER TURN
MM IN MM IN N LB MM IN MM IN MM IN No. No. N/MM LB/IN
LWM45 110 0991S 45.00 1.772 35.00 1.378 110.00 24.73 3.38 0.133 9.91 0.390 0.46 x 3.63 0.018 x 0.143 3 3.5 16.85 96.210 Y
LWM45 110 1321S 4.52 0.178 13.21 0.520 4 12.66 72.290 Z
LWM45 110 1651S 5.64 0.222 16.51 0.650 5 10.12 57.780 BB
LWM45 110 1981S 6.76 0.266 19.81 0.780 6 8.43 48.130 BB
LWM45 110 2311S 7.90 0.311 23.11 0.910 7 7.23 41.280 BC
LWM45 110 2642S 9.02 0.355 26.42 1.040 8 6.32 36.090 BD
LWM45 110 2972S 10.16 0.400 29.72 1.170 9 5.62 32.090 BE
LWM45 110 3632S 12.40 0.488 36.32 1.430 11 4.60 26.270 BJ
LWM45 110 4293S 14.66 0.577 42.93 1.690 13 3.89 22.210 BM
LWM45 225 0991S 45.00 1.772 35.00 1.378 225.00 50.58 5.33 0.210 9.91 0.390 0.46 x 3.63 0.018 x 0.143 3 4.5 49.21 280.980 Y
LWM45 225 1321S 6.99 0.275 13.21 0.520 4 36.16 206.470 Z
LWM45 225 1651S 9.14 0.360 16.51 0.650 5 30.55 174.440 BB
LWM45 225 1981S 10.80 0.425 19.81 0.780 6 24.95 142.460 BB
LWM45 225 2311S 12.70 0.500 23.11 0.910 7 21.61 123.390 BC
LWM45 225 2642S 14.48 0.570 26.42 1.040 8 18.85 107.630 BD
LWM45 225 2972S 16.26 0.640 29.72 1.170 9 16.71 95.410 BE
LWM45 225 3632S 19.81 0.780 36.32 1.430 11 13.63 77.830 BJ
LWM45 225 4293S 23.37 0.920 42.93 1.690 13 11.50 65.660 BM
LWM45 400 0991S 45.00 1.772 35.00 1.378 400.00 89.92 6.43 0.253 9.91 0.390 0.61 x 3.76 0.024 x 0.148 3 4.5 114.95 656.350 Y
LWM45 400 1321S 8.38 0.330 13.21 0.520 4 82.88 473.240 Z
LWM45 400 1651S 11.20 0.441 16.51 0.650 5 75.35 430.240 BB
LWM45 400 1981S 12.95 0.510 19.81 0.780 6 58.33 333.060 BB
LWM45 400 2311S 15.37 0.605 23.11 0.910 7 51.63 294.800 BC
LWM45 400 2642S 17.27 0.680 26.42 1.040 8 43.74 249.750 BD
LWM45 400 2972S 19.68 0.775 29.72 1.170 9 39.87 227.650 BE
LWM45 400 3632S 24.26 0.955 36.32 1.430 11 33.15 189.280 BJ
LWM45 400 4293S 28.45 1.120 42.93 1.690 13 27.63 157.760 BM
138 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
B E L L E V I L L E S P R I N G WA S H E R S
Guide to using tables
Outside Diameter Thickness
maximum size of outside of the Spring Section
diameter. If the spring is to be
enclosed hole sizes must be Overall Height Unloaded
greater than this dimension. of a single spring washer
B E L L E V I L L E S P R I N G WA S H E R S
Price Group
● Manufactured from 300 series stainless steel and passivated to ASTM A967
Lee Stock Number
LEE
reference to the price list
INSIDE DIAMETER OUTSIDE DIAMETER THICKNESS OVERALL HEIGHT CALCULATED PRICE
ordering reference. STOCK
NUMBER
MINIMUM MAXIMUM UNLOADED LOAD AT FLAT GROUP
MM IN MM IN MM IN MM IN N LB
093-005-188 2.36 .093 4.78 .188 .13 .005 .36 .014 25 5.7 L
093-006-188 .15 .006 .38 .015 44 9.8 L
093-007-188 .18 .007 .36 .014 54 12.2 L
093-009-188
093-010-188
.23
.25
.009
.010
.36
.38
.014
.015
82
113
18.4
25.3
L
L
Calculated Load at Flat
125-008-250 3.18 .125 6.35 .250 .20 .008 .41 .016 52 11.8 K
125-013-250 .33 .013 .51 .020 197 44.3 K load when the spring
138-010-281 3.51 .138 7.14 .281 .25 .010 .51 .020 100 22.6 K
138-013-281
138-015-281
.33
.38
.013
.015
.53
.58
.021
.023
176
271
39.7
60.9
K
K
washer is fully compressed
148-015-281 3.76 .148 7.14 .281 .38 .015 .61 .024 318 71.4 K
156-009-312 3.96 .156 7.92 .312 .23 .009 .51 .020 66 14.8 K
156-010-312 .25 .010 .51 .020 82 18.5 K
156-011-312 .28 .011 .55 .022 116 26.1 K
156-015-312 .38 .015 .58 .023 222 49.9 K
156-017-312 .43 .017 .64 .025 323 72.6 K
Inside Diameter 187-012-375
187-015-375
4.75 .187 9.53 .375 .30
.38
.012
.015
.61
.64
.024
.025
118
192
26.5
43.1
K
K
187-017-375 .43 .017 .66 .026 251 56.5 K
minimum size of hole at 187-020-375 .51 .020 .74 .029 409 92.0 K
187-022-375 .56 .022 .76 .030 484 108.8 K
1 Our Belleville Spring Washers are manufactured from 300 series stainless steel with passivation finish in
375-030-750 .76 .030 1.12 .044 538 120.9 L
375-035-750 .89 .035 1.40 .055 1,220 274.2 L
375-038-750 .97 .038 1.22 .048 781 175.5 L
accordance with ASTM A967.
375-040-750 1.02 .040 1.50 .059 1,730 388.9 L
375-042-750 1.07 .042 1.32 .052 1,054 236.9 L
375-044-750 1.12 .044 1.37 .054 1,212 272.4 L
2 A Belleville Spring Washer is a washer in the form of a cone, having constant material thickness, and
375-057-750
375-062-750
1.45
1.57
.057
.062
1.396
1.98
.070
.078
3,426
5,426
769.9
1,219.4
N
N
used as a compression spring.
3 Unlike compression springs Belleville Spring Washers provide exceptionally high loads in restricted spaces.
160 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
4 Load flexibility can be varied by stacking the washers in various configurations (see below).
5 To minimise friction and optimise load ensure stacks of springs are guided over a shaft or in a cylinder.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 139
B E L L E V I L L E S P R I N G WA S H E R S
● Manufactured from 300 series stainless steel and passivated to ASTM A967
LEE INSIDE DIAMETER OUTSIDE DIAMETER THICKNESS OVERALL HEIGHT CALCULATED PRICE
STOCK MINIMUM MAXIMUM UNLOADED LOAD AT FLAT GROUP
NUMBER
MM IN MM IN MM IN MM IN N LB
093-005-188 2.36 0.093 4.78 0.188 0.13 0.005 0.36 0.014 26 5.7 W2
093-006-188 2.36 0.093 4.78 0.188 0.15 0.006 0.38 0.015 44 9.8 W2
093-007-188 2.36 0.093 4.78 0.188 0.18 0.007 0.36 0.014 54 12.1 W2
093-009-188 2.36 0.093 4.78 0.188 0.23 0.009 0.36 0.014 82 18.4 W2
093-010-188 2.36 0.093 4.78 0.188 0.25 0.010 0.38 0.015 113 25.3 W2
125-012-236 3.18 0.125 5.99 0.236 0.30 0.012 0.46 0.018 154 34.7 W1
125-008-250 3.18 0.125 6.35 0.250 0.20 0.008 0.41 0.016 52 11.8 W1
125-013-250 3.18 0.125 6.35 0.250 0.33 0.013 0.51 0.020 197 44.3 W1
125-012-394 3.18 0.125 10.01 0.394 0.30 0.012 0.66 0.026 111 24.9 W2
125-016-394 3.18 0.125 10.01 0.394 0.41 0.016 0.71 0.028 225 50.6 W2
125-020-394 3.18 0.125 10.01 0.394 0.51 0.020 0.76 0.030 367 82.3 W2
138-010-281 3.51 0.138 7.14 0.281 0.25 0.010 0.51 0.020 100 22.6 W1
138-013-281 3.51 0.138 7.14 0.281 0.33 0.013 0.53 0.021 177 39.7 W1
138-015-281 3.51 0.138 7.14 0.281 0.38 0.015 0.58 0.023 271 60.9 W1
138-022-437 3.51 0.138 11.10 0.437 0.56 0.022 0.81 0.032 396 89.1 W3
148-015-281 3.76 0.148 7.14 0.281 0.38 0.015 0.61 0.024 318 71.4 W1
156-009-312 3.96 0.156 7.92 0.312 0.23 0.009 0.51 0.020 66 14.8 W1
156-010-312 3.96 0.156 7.92 0.312 0.25 0.010 0.51 0.020 82 18.5 W1
156-011-312 3.96 0.156 7.92 0.312 0.28 0.011 0.56 0.022 121 27.1 W1
156-015-312 3.96 0.156 7.92 0.312 0.38 0.015 0.58 0.023 222 49.9 W1
156-017-312 3.96 0.156 7.92 0.312 0.43 0.017 0.61 0.024 283 63.6 W1
165-013-343 4.19 0.165 8.71 0.343 0.33 0.013 0.61 0.024 161 36.2 W2
165-016-343 4.19 0.165 8.71 0.343 0.41 0.016 0.66 0.026 273 61.4 W2
165-018-343 4.19 0.165 8.71 0.343 0.46 0.018 0.71 0.028 388 87.4 W3
165-016-394 4.19 0.165 10.01 0.394 0.41 0.016 0.71 0.028 235 52.9 W2
165-020-394 4.19 0.165 10.01 0.394 0.51 0.020 0.76 0.030 384 86.1 W3
165-016-472 4.19 0.165 11.99 0.472 0.41 0.016 0.79 0.031 198 44.5 W2
165-020-472 4.19 0.165 11.99 0.472 0.51 0.020 0.84 0.033 335 75.2 W3
165-024-472 4.19 0.165 11.99 0.472 0.61 0.024 0.99 0.039 667 150.0 W3
187-012-375 4.75 0.187 9.53 0.375 0.30 0.012 0.61 0.024 118 26.5 W1
187-015-375 4.75 0.187 9.53 0.375 0.38 0.015 0.64 0.025 192 43.1 W1
187-017-375 4.75 0.187 9.53 0.375 0.43 0.017 0.66 0.026 251 56.5 W1
187-020-375 4.75 0.187 9.53 0.375 0.51 0.020 0.74 0.029 409 92.0 W1
187-022-375 4.75 0.187 9.53 0.375 0.56 0.022 0.76 0.030 485 108.8 W1
187-030-375 4.75 0.187 9.53 0.375 0.76 0.030 0.91 0.036 921 206.9 W2
187-020-562 4.75 0.187 14.27 0.562 0.51 0.020 0.94 0.037 307 69.0 W3
187-028-562 4.75 0.187 14.27 0.562 0.71 0.028 1.07 0.042 695 156.0 W3
205-010-394 5.21 0.205 10.01 0.394 0.25 0.010 0.56 0.022 64 14.2 W2
205-016-394 5.21 0.205 10.01 0.394 0.41 0.016 0.71 0.028 260 58.3 W2
205-020-394 5.21 0.205 10.01 0.394 0.51 0.020 0.76 0.030 423 94.9 W3
205-020-472 5.21 0.205 11.99 0.472 0.51 0.020 0.89 0.035 405 91.1 W3
205-024-472 5.21 0.205 11.99 0.472 0.61 0.024 0.94 0.037 607 136.4 W3
205-024-591 5.21 0.205 15.01 0.591 0.61 0.024 1.04 0.041 482 108.3 W3
218-016-437 5.54 0.218 11.10 0.437 0.41 0.016 0.79 0.031 257 57.8 W2
218-020-437 5.54 0.218 11.10 0.437 0.51 0.020 0.81 0.032 402 90.3 W2
218-023-437 5.54 0.218 11.10 0.437 0.58 0.023 0.86 0.034 560 125.9 W3
218-035-687 5.54 0.218 17.45 0.687 0.89 0.035 1.27 0.050 969 217.7 W3
250-024-472 6.20 0.250 11.99 0.472 0.61 0.024 0.94 0.037 669 150.4 W3
250-017-500 6.35 0.250 12.70 0.500 0.43 0.017 0.74 0.029 188 42.4 W1
250-018-500 6.35 0.250 12.70 0.500 0.46 0.018 0.76 0.030 224 50.4 W1
250-020-500 6.35 0.250 12.70 0.500 0.51 0.020 0.81 0.032 307 69.1 W1
250-023-500 6.35 0.250 12.70 0.500 0.58 0.023 0.91 0.036 506 113.8 W1
250-024-500 6.35 0.250 12.70 0.500 0.61 0.024 0.97 0.038 620 139.3 W2
250-025-500 6.35 0.250 12.70 0.500 0.64 0.025 0.99 0.039 700 157.4 W2
250-038-500 6.35 0.250 12.70 0.500 0.97 0.038 1.19 0.047 1,581 355.3 W3
250-042-562 6.35 0.250 14.27 0.562 1.07 0.042 1.40 0.055 2,314 520.0 W3
250-020-591 6.35 0.250 15.01 0.591 0.51 0.020 0.99 0.039 325 73.0 W3
250-024-591 6.35 0.250 15.01 0.591 0.61 0.024 1.04 0.041 502 112.8 W3
250-028-591 6.35 0.250 15.01 0.591 0.71 0.028 1.09 0.043 703 158.1 W3
140 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
B E L L E V I L L E S P R I N G WA S H E R S
● Manufactured from 300 series stainless steel and passivated to ASTM A967
LEE INSIDE DIAMETER OUTSIDE DIAMETER THICKNESS OVERALL HEIGHT CALCULATED PRICE
STOCK MINIMUM MAXIMUM UNLOADED LOAD AT FLAT GROUP
NUMBER
MM IN MM IN MM IN MM IN N LB
250-032-637 6.35 0.250 16.18 0.637 0.81 0.032 1.22 0.048 946 212.4 W3
250-052-687 6.35 0.250 17.45 0.687 1.32 0.052 1.75 0.069 3,653 820.9 W7
250-025-750 6.35 0.250 19.05 0.750 0.64 0.025 1.24 0.049 476 106.9 W2
250-036-750 6.35 0.250 19.05 0.750 0.91 0.036 1.37 0.054 1,065 239.4 W3
250-052-750 6.35 0.250 19.05 0.750 1.32 0.052 1.65 0.065 2,319 521.1 W9
250-061-812 6.35 0.250 20.62 0.812 1.55 0.061 2.13 0.084 5,621 1263.3 W11
250-050-875 6.35 0.250 22.23 0.875 1.27 0.050 1.68 0.066 1,852 416.1 W9
250-075-875 6.35 0.250 22.23 0.875 1.91 0.075 2.18 0.086 4,297 965.6 W11
250-070-937 6.35 0.250 23.80 0.937 1.78 0.070 2.54 0.100 8,316 1868.8 W11
283-014-551 7.19 0.283 14.00 0.551 0.36 0.014 0.79 0.031 125 28.1 W2
283-020-551 7.19 0.283 14.00 0.551 0.51 0.020 0.89 0.035 322 72.2 W3
283-031-551 7.19 0.283 14.00 0.551 0.79 0.031 1.09 0.043 957 215.2 W3
283-050-875 7.19 0.283 22.23 0.875 1.27 0.050 1.68 0.066 1,860 417.9 W9
283-075-875 7.19 0.283 22.23 0.875 1.91 0.075 2.18 0.086 4,314 969.7 W11
312-024-625 7.92 0.312 15.88 0.625 0.61 0.024 1.02 0.040 453 101.8 W3
312-030-625 7.92 0.312 15.88 0.625 0.76 0.030 1.12 0.044 774 173.9 W3
312-031-625 7.92 0.312 15.88 0.625 0.79 0.031 1.22 0.048 1,037 233.0 W3
312-047-625 7.92 0.312 15.88 0.625 1.19 0.047 1.50 0.059 2,551 573.2 W6
312-052-687 7.92 0.312 17.45 0.687 1.32 0.052 1.73 0.068 3,645 819.3 W9
312-040-875 7.92 0.312 22.23 0.875 1.02 0.040 1.45 0.057 1,022 229.6 W5
312-030-937 7.92 0.312 23.80 0.937 0.76 0.030 1.52 0.060 658 147.9 W6
312-045-937 7.92 0.312 23.80 0.937 1.14 0.045 1.70 0.067 1,629 366.2 W7
312-070-937 7.92 0.312 23.80 0.937 1.78 0.070 2.39 0.094 6,690 1503.5 W13
312-080-1000 7.92 0.312 25.40 1.000 2.03 0.080 2.82 0.111 11,275 2533.9 W14
323-020-709 8.20 0.323 18.01 0.709 0.51 0.020 1.09 0.043 281 63.0 W3
323-028-709 8.20 0.323 18.01 0.709 0.71 0.028 1.24 0.049 702 157.8 W3
323-031-709 8.20 0.323 18.01 0.709 0.79 0.031 1.30 0.051 907 204.0 W4
323-039-709 8.20 0.323 18.01 0.709 0.99 0.039 1.40 0.055 1,446 324.9 W6
323-028-787 8.20 0.323 19.99 0.787 0.71 0.028 1.35 0.053 655 147.3 W3
323-035-787 8.20 0.323 19.99 0.787 0.89 0.035 1.45 0.057 1,126 253.1 W4
323-028-906 8.20 0.323 23.01 0.906 0.71 0.028 1.50 0.059 596 134.0 W4
323-035-906 8.20 0.323 23.01 0.906 0.89 0.035 1.60 0.063 1,052 236.3 W4
344-090-1000 8.74 0.344 25.40 1.000 2.29 0.090 2.59 0.102 6,263 1407.4 W19
344-062-1125 8.74 0.344 28.58 1.125 1.57 0.062 2.11 0.083 2,807 630.8 W12
375-028-750 9.53 0.375 19.05 0.750 0.71 0.028 1.07 0.042 438 98.3 W3
375-030-750 9.53 0.375 19.05 0.750 0.76 0.030 1.12 0.044 538 120.9 W3
375-035-750 9.53 0.375 19.05 0.750 0.89 0.035 1.40 0.055 1,220 274.2 W3
375-038-750 9.53 0.375 19.05 0.750 0.97 0.038 1.22 0.048 781 175.5 W4
375-040-750 9.53 0.375 19.05 0.750 1.02 0.040 1.50 0.059 1,730 388.9 W4
375-042-750 9.53 0.375 19.05 0.750 1.07 0.042 1.32 0.052 1,055 236.9 W5
375-044-750 9.53 0.375 19.05 0.750 1.12 0.044 1.37 0.054 1,213 272.4 W5
375-057-750 9.53 0.375 19.05 0.750 1.45 0.057 1.78 0.070 3,426 769.9 W8
375-062-750 9.53 0.375 19.05 0.750 1.57 0.062 1.98 0.078 5,426 1219.4 W8
375-076-750 9.53 0.375 19.05 0.750 1.93 0.076 2.74 0.108 19,989 4492.1 W14
375-047-950 9.53 0.375 24.13 0.950 1.19 0.047 1.73 0.068 1,770 397.7 W8
375-042-970 9.53 0.375 24.64 0.970 1.07 0.042 1.45 0.057 861 193.6 W6
375-080-1000 9.53 0.375 25.40 1.000 2.03 0.080 2.77 0.109 10,763 2418.8 W6
375-053-1125 9.53 0.375 28.58 1.125 1.35 0.053 2.03 0.080 2,266 509.3 W11
375-078-1125 9.53 0.375 28.58 1.125 1.98 0.078 2.46 0.097 5,084 1142.5 W14
375-089-1188 9.53 0.375 30.18 1.188 2.26 0.089 3.07 0.121 11,362 2553.3 W18
406-062-875 10.31 0.406 22.23 0.875 1.57 0.062 1.88 0.074 2,882 647.7 W11
406-089-875 10.31 0.406 22.23 0.875 2.26 0.089 2.54 0.100 7,815 1756.3 W18
406-109-875 10.31 0.406 22.23 0.875 2.77 0.109 3.15 0.124 19,577 4399.6 W22
406-062-1000 10.31 0.406 25.40 1.000 1.57 0.062 2.34 0.092 5,273 1185.1 W12
406-105-1000 10.31 0.406 25.40 1.000 2.67 0.105 3.00 0.118 11,099 2494.3 W22
406-098-1188 10.31 0.406 30.18 1.188 2.49 0.098 3.02 0.119 10,018 2251.4 W21
406-105-1188 10.31 0.406 30.18 1.188 2.67 0.105 3.18 0.125 11,735 2637.3 W22
406-074-1250 10.31 0.406 31.75 1.250 1.88 0.074 2.49 0.098 4,432 996.1 W14
437-031-875 11.10 0.437 22.23 0.875 0.79 0.031 1.50 0.059 871 195.9 W4
437-042-875 11.10 0.437 22.23 0.875 1.07 0.042 1.57 0.062 1,548 347.9 W5
437-059-875 11.10 0.437 22.23 0.875 1.50 0.059 2.11 0.083 5,150 1157.3 W10
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 141
B E L L E V I L L E S P R I N G WA S H E R S
● Manufactured from 300 series stainless steel and passivated to ASTM A967
LEE INSIDE DIAMETER OUTSIDE DIAMETER THICKNESS OVERALL HEIGHT CALCULATED PRICE
STOCK MINIMUM MAXIMUM UNLOADED LOAD AT FLAT GROUP
NUMBER
MM IN MM IN MM IN MM IN N LB
437-035-1000 11.10 0.437 25.40 1.000 0.89 0.035 1.70 0.067 1,034 232.5 W4
437-040-1000 11.10 0.437 25.40 1.000 1.02 0.040 1.80 0.071 1,496 336.2 W5
437-050-1000 11.10 0.437 25.40 1.000 1.27 0.050 2.16 0.085 3,298 741.3 W9
437-080-1000 11.10 0.437 25.40 1.000 2.03 0.080 2.69 0.106 10,037 2255.6 W14
480-049-906 12.19 0.480 23.01 0.906 1.24 0.049 1.85 0.073 2,854 641.2 W8
480-028-984 12.19 0.480 24.99 0.984 0.71 0.028 1.60 0.063 627 140.9 W4
480-049-984 12.19 0.480 24.99 0.984 1.24 0.049 1.96 0.077 2,688 604.0 W9
480-059-1240 12.19 0.480 31.50 1.240 1.50 0.059 2.36 0.093 3,313 744.4 W12
500-042-830 12.70 0.500 21.08 0.830 1.07 0.042 1.70 0.067 2,489 559.3 W5
500-089-928 12.70 0.500 23.57 0.928 2.26 0.089 2.72 0.107 12,367 2779.3 W18
500-033-1000 12.70 0.500 25.40 1.000 0.84 0.033 1.32 0.052 546 122.8 W3
500-035-1000 12.70 0.500 25.40 1.000 0.89 0.035 1.45 0.057 755 169.7 W4
500-045-1000 12.70 0.500 25.40 1.000 1.14 0.045 1.55 0.061 1,167 262.3 W8
500-050-1000 12.70 0.500 25.40 1.000 1.27 0.050 1.91 0.075 2,502 562.1 W9
500-073-1000 12.70 0.500 25.40 1.000 1.85 0.073 2.31 0.091 5,604 1259.6 W13
500-080-1000 12.70 0.500 25.40 1.000 2.03 0.080 2.62 0.103 9,425 2118.3 W14
500-100-1063 12.70 0.500 27.00 1.063 2.54 0.100 2.95 0.116 10,991 2470.1 W19
500-039-1100 12.70 0.500 27.94 1.100 0.99 0.039 1.88 0.074 1,313 295.0 W6
500-049-1100 12.70 0.500 27.94 1.100 1.24 0.049 2.11 0.083 2,529 568.4 W9
500-059-1100 12.70 0.500 27.94 1.100 1.50 0.059 2.21 0.087 3,636 817.1 W12
500-062-1125 12.70 0.500 28.58 1.125 1.57 0.062 2.11 0.083 3,000 674.1 W12
500-125-1125 12.70 0.500 28.58 1.125 3.18 0.125 3.68 0.145 23,411 5261.1 W25
500-060-1262 12.70 0.500 32.05 1.262 1.52 0.060 2.31 0.091 3,082 692.7 W12
500-098-1312 12.70 0.500 33.32 1.312 2.49 0.098 3.33 0.131 13,119 2948.3 W22
500-104-1312 12.70 0.500 33.32 1.312 2.64 0.104 3.66 0.144 19,005 4271.1 W22
500-112-1312 12.70 0.500 33.32 1.312 2.84 0.112 3.58 0.141 17,210 3867.5 W22
500-030-1375 12.70 0.500 34.93 1.375 0.76 0.030 1.68 0.066 371 83.3 W6
500-032-1375 12.70 0.500 34.93 1.375 0.81 0.032 1.78 0.070 475 106.7 W6
500-087-1375 12.70 0.500 34.93 1.375 2.21 0.087 3.12 0.123 9,043 2032.1 W16
500-047-1500 12.70 0.500 38.10 1.500 1.19 0.047 2.36 0.093 1,515 340.4 W13
500-070-1500 12.70 0.500 38.10 1.500 1.78 0.070 2.64 0.104 3,698 831.2 W13
500-080-1500 12.70 0.500 38.10 1.500 2.03 0.080 2.49 0.098 2,923 656.9 W18
500-102-1500 12.70 0.500 38.10 1.500 2.59 0.102 3.25 0.128 8,751 1966.6 W21
500-140-1625 12.70 0.500 41.28 1.625 3.56 0.140 4.27 0.168 20,656 4642.2 W32
531-062-1000 13.49 0.531 25.40 1.000 1.57 0.062 2.16 0.085 4,554 1023.4 W12
531-090-1063 13.49 0.531 27.00 1.063 2.29 0.090 2.69 0.106 8,258 1855.8 W19
531-062-1125 13.49 0.531 28.58 1.125 1.57 0.062 2.11 0.083 3,074 690.9 W12
531-074-1218 13.49 0.531 30.94 1.218 1.88 0.074 2.64 0.104 6,173 1387.3 W14
531-062-1250 13.49 0.531 31.75 1.250 1.57 0.062 2.34 0.092 3,419 768.2 W12
531-078-1250 13.49 0.531 31.75 1.250 1.98 0.078 2.62 0.103 5,672 1274.7 W14
531-090-1250 13.49 0.531 31.75 1.250 2.29 0.090 2.90 0.114 8,365 1879.8 W19
531-125-1250 13.49 0.531 31.75 1.250 3.18 0.125 3.63 0.143 16,808 3777.3 W25
531-100-1375 13.49 0.531 34.93 1.375 2.54 0.100 3.05 0.120 7,712 1733.1 W21
531-095-1500 13.49 0.531 38.10 1.500 2.41 0.095 3.18 0.125 8,212 1845.6 W20
562-038-1125 14.27 0.562 28.58 1.125 0.97 0.038 1.85 0.073 1,214 272.8 W5
562-057-1125 14.27 0.562 28.58 1.125 1.45 0.057 2.13 0.084 3,161 710.3 W11
562-105-1625 14.27 0.562 41.28 1.625 2.67 0.105 3.43 0.135 9,421 2117.1 W23
593-089-1188 15.06 0.593 30.18 1.188 2.26 0.089 2.92 0.115 10,385 2333.9 W18
625-050-1125 15.88 0.625 28.58 1.125 1.27 0.050 1.73 0.068 1,527 343.2 W10
625-040-1250 15.88 0.625 31.75 1.250 1.02 0.040 2.08 0.082 1,377 309.5 W6
625-062-1250 15.88 0.625 31.75 1.250 1.57 0.062 2.34 0.092 3,663 823.1 W12
625-089-1250 15.88 0.625 31.75 1.250 2.26 0.089 2.82 0.111 7,945 1785.5 W19
625-050-1375 15.88 0.625 34.93 1.375 1.27 0.050 2.41 0.095 2,276 511.5 W11
625-062-1375 15.88 0.625 34.93 1.375 1.57 0.062 2.79 0.110 4,629 1040.3 W12
625-078-1375 15.88 0.625 34.93 1.375 1.98 0.078 2.54 0.100 4,224 949.4 W14
625-112-1500 15.88 0.625 38.10 1.500 2.84 0.112 3.76 0.148 16,696 3752.1 W25
142 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
B E L L E V I L L E S P R I N G WA S H E R S
● Manufactured from 300 series stainless steel and passivated to ASTM A967
LEE INSIDE DIAMETER OUTSIDE DIAMETER THICKNESS OVERALL HEIGHT CALCULATED PRICE
STOCK MINIMUM MAXIMUM UNLOADED LOAD AT FLAT GROUP
NUMBER
MM IN MM IN MM IN MM IN N LB
625-062-1625 15.88 0.625 41.28 1.625 1.57 0.062 2.13 0.084 1,446 325.0 W13
625-140-1625 15.88 0.625 41.28 1.625 3.56 0.140 4.27 0.168 21,194 4762.9 W32
625-057-1875 15.88 0.625 47.63 1.875 1.45 0.057 2.92 0.115 2,180 490.0 W13
625-086-1875 15.88 0.625 47.63 1.875 2.18 0.086 3.28 0.129 5,551 1247.6 W20
625-127-1875 15.88 0.625 47.63 1.875 3.23 0.127 4.01 0.158 12,889 2896.6 W29
656-098-1312 16.66 0.656 33.32 1.312 2.49 0.098 3.20 0.126 12,255 2753.9 W22
656-085-1625 16.66 0.656 41.28 1.625 2.16 0.085 2.67 0.105 3,426 769.8 W19
656-140-1750 16.66 0.656 44.45 1.750 3.56 0.140 4.65 0.183 27,926 6275.9 W32
656-150-2000 16.66 0.656 50.80 2.000 3.81 0.150 5.23 0.206 33,672 7567.2 W33
692-156-1250 17.58 0.692 31.75 1.250 3.96 0.156 4.39 0.173 35,384 7951.8 W33
692-044-1375 17.58 0.692 34.93 1.375 1.12 0.044 2.24 0.088 1,592 357.9 W11
692-067-1375 17.58 0.692 34.93 1.375 1.70 0.067 2.57 0.101 4,345 976.5 W13
692-140-1375 17.58 0.692 34.93 1.375 3.56 0.140 4.83 0.190 58,299 13101.7 W32
692-125-2000 17.58 0.692 50.80 2.000 3.18 0.125 4.09 0.161 12,592 2829.8 W28
692-187-2375 17.58 0.692 60.33 2.375 4.75 0.187 5.77 0.227 32,875 7388.1 W39
750-040-1500 19.05 0.750 38.10 1.500 1.02 0.040 1.73 0.068 638 143.3 W13
750-045-1500 19.05 0.750 38.10 1.500 1.14 0.045 2.36 0.093 1,556 349.7 W13
750-060-1500 19.05 0.750 38.10 1.500 1.52 0.060 2.72 0.107 3,611 811.6 W14
750-072-1500 19.05 0.750 38.10 1.500 1.83 0.072 2.77 0.109 4,913 1104.1 W18
750-107-1500 19.05 0.750 38.10 1.500 2.72 0.107 3.40 0.134 11,766 2644.3 W23
750-125-1500 19.05 0.750 38.10 1.500 3.18 0.125 4.06 0.160 24,318 5465.1 W27
750-150-2000 19.05 0.750 50.80 2.000 3.81 0.150 5.16 0.203 32,415 7284.8 W35
750-068-2250 19.05 0.750 57.15 2.250 1.73 0.068 3.48 0.137 3,058 687.3 W18
750-150-2250 19.05 0.750 57.15 2.250 3.81 0.150 4.78 0.188 18,078 4062.7 W35
875-057-1750 22.23 0.875 44.45 1.750 1.45 0.057 2.90 0.114 2,759 620.0 W13
875-085-1750 22.23 0.875 44.45 1.750 2.16 0.085 3.25 0.128 6,902 1551.1 W21
875-131-1750 22.23 0.875 44.45 1.750 3.33 0.131 4.24 0.167 21,152 4753.6 W30
875-150-2000 22.23 0.875 50.80 2.000 3.81 0.150 5.03 0.198 30,547 6865.0 W35
1000-049-1969 25.40 1.000 50.01 1.969 1.24 0.049 2.84 0.112 1,544 347.0 W14
1000-059-1969 25.40 1.000 50.01 1.969 1.50 0.059 3.10 0.122 2,695 605.7 W14
1000-065-2000 25.40 1.000 50.80 2.000 1.65 0.065 3.30 0.130 3,572 802.7 W14
1000-078-2000 25.40 1.000 50.80 2.000 1.98 0.078 3.51 0.138 5,698 1280.4 W18
1000-097-2000 25.40 1.000 50.80 2.000 2.46 0.097 3.68 0.145 8,766 1970.1 W25
1000-078-2375 25.40 1.000 60.33 2.375 1.98 0.078 3.99 0.157 4,952 1112.8 W20
1016-118-2000 25.81 1.016 50.80 2.000 3.00 0.118 4.19 0.165 15,594 3504.4 W30
1016-090-3000 25.81 1.016 76.20 3.000 2.29 0.090 4.57 0.180 5,210 1170.9 W30
1063-219-3500 27.00 1.063 88.90 3.500 5.56 0.219 7.14 0.281 37,722 8477.4 W40
1125-059-2250 28.58 1.125 57.15 2.250 1.50 0.059 3.45 0.136 2,501 561.9 W19
1125-073-2250 28.58 1.125 57.15 2.250 1.85 0.073 3.76 0.148 4,613 1036.7 W20
1130-206-2750 28.70 1.130 69.85 2.750 5.23 0.206 6.91 0.272 56,447 12685.3 W39
1250-219-2250 31.75 1.250 57.15 2.250 5.56 0.219 6.40 0.252 58,816 13217.9 W39
1250-080-2500 31.75 1.250 63.50 2.500 2.03 0.080 4.06 0.160 5,245 1178.9 W35
1255-187-2500 31.88 1.255 63.50 2.500 4.75 0.187 6.12 0.241 45,324 10185.8 W39
1255-168-3750 31.88 1.255 95.25 3.750 4.27 0.168 6.38 0.251 19,978 4489.8 W39
1406-132-2750 35.71 1.406 69.85 2.750 3.35 0.132 4.98 0.196 15,782 3546.7 W37
1755-133-3000 44.58 1.755 76.20 3.000 3.38 0.133 5.66 0.223 21,143 4751.6 W38
2063-125-3375 52.40 2.063 85.73 3.375 3.18 0.125 5.16 0.203 12,576 2826.3 W38
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 143
EXTENSION SPRINGS
Guide to using tables
Maximum Load Initial Tension
each spring will accept, excess the force that keeps the coils of an extension
load will cause damage spring closed and which must be overcome
(See note 5). before the coils start to open.
Free Length
length of the spring in
EXTENSION SPRINGS
Lee Stock Number the unloaded position,
● Loops at Random Position ●●Music
MusicWire
Wire(Plated*),
(Plated), or Stainless Steel (Passivated)
Please add suffix M for Music LEE OUTSIDE
NOMINAL
MAXIMUM INITIAL
NOMINAL
SPRING MAXIMUM PRICE GROUP
measured from inside the
STOCK WIRE FREE
DIAMETER LOAD TENSION RATE EXTENDED LENGTH Music 302
NUMBER DIAMETER LENGTH
end loops.
Wire Stainless
*Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
free length inside loops
144 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
Additional Information
1 To find the load at any working length, when free length, spring rate and initial tension are given, use the
formula F = (S x L) + Fo
(where F is the load; S is the spring rate; L is the deflection from free length; Fo is the initial tension).
2 The free length of an extension spring is measured from inside the end loops. To obtain the overall length add
two wire diameters to the given length.
3 As with compression springs, in order to achieve long life and service, good design suggests that extension
springs are not extended beyond 80% of their deflective capability.
5 Please note that the spring rates and maximum loads listed in the following extension spring tables relate only
to music wire. When choosing stainless steel multiply the factors by 0.833.
144 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
EI 007A 01 1.60 0.063 0.18 0.007 1.42 0.32 0.13 0.03 6.35 0.250 0.175 1.00 13.72 0.540 K M
EI 007A 02 7.95 0.313 0.121 0.69 18.62 0.733 K M
EI 007A 03 9.53 0.375 0.093 0.53 23.50 0.925 K M
EI 007A 04 11.13 0.438 0.075 0.43 28.14 1.108 K M
EI 007A 05 12.70 0.500 0.063 0.36 33.27 1.310 K M
EI 008A 01 0.20 0.008 2.00 0.45 0.18 0.04 6.35 0.250 0.350 2.00 11.68 0.460 K M
EI 008A 02 7.95 0.313 0.245 1.40 15.32 0.603 K M
EI 008A 03 9.53 0.375 0.193 1.10 18.92 0.745 K M
EI 008A 04 11.13 0.438 0.154 0.88 23.06 0.908 K M
EI 008A 05 12.70 0.500 0.130 0.74 26.67 1.050 K M
EI 008A 06 15.88 0.625 0.100 0.57 34.16 1.345 K M
EI 008A 07 19.05 0.750 0.081 0.46 41.66 1.640 K M
EI 008A 08 22.23 0.875 0.067 0.38 49.66 1.955 K M
EI 009A 01 0.23 0.009 2.76 0.62 0.27 0.06 6.35 0.250 0.648 3.70 10.16 0.400 K M
EI 009A 02 7.95 0.313 0.473 2.70 13.28 0.523 K M
EI 009A 03 9.53 0.375 0.368 2.10 16.38 0.645 K M
EI 009A 04 11.13 0.438 0.298 1.70 19.51 0.768 K M
EI 009A 05 12.70 0.500 0.245 1.40 22.86 0.900 K M
EI 009A 06 15.88 0.625 0.193 1.10 28.83 1.135 K M
EI 009A 07 19.05 0.750 0.151 0.86 35.56 1.400 K M
EI 009A 08 22.23 0.875 0.126 0.72 42.04 1.655 K M
EI 011A 01 0.28 0.011 5.07 1.14 0.44 0.10 6.35 0.250 1.944 11.10 8.74 0.344 K M
EI 011A 02 7.95 0.313 1.384 7.90 11.30 0.445 K M
EI 011A 03 9.53 0.375 1.033 5.90 14.00 0.551 K M
EI 011A 04 11.13 0.438 0.841 4.80 16.64 0.655 K M
EI 011A 05 12.70 0.500 0.718 4.10 19.15 0.754 K M
EI 011A 06 15.88 0.625 0.560 3.20 24.13 0.950 K M
EI 011A 07 19.05 0.750 0.438 2.50 29.62 1.166 K M
EI 007AA 01 1.98 0.078 0.18 0.007 1.14 0.26 0.11 0.03 6.35 0.250 0.107 0.61 16.00 0.630 J L
EI 007AA 02 7.95 0.313 0.069 0.39 22.91 0.902 J L
EI 007AA 03 9.53 0.375 0.051 0.29 29.69 1.169 J L
EI 007AA 04 11.13 0.438 0.040 0.23 36.60 1.441 J L
EI 007AA 05 12.70 0.500 0.034 0.19 43.41 1.709 J L
EI 008AA 01 0.20 0.008 1.72 0.39 0.16 0.04 6.35 0.250 0.212 1.21 13.72 0.540 J L
EI 008AA 02 7.95 0.313 0.138 0.79 19.28 0.759 J L
EI 008AA 03 9.53 0.375 0.103 0.59 24.71 0.973 J L
EI 008AA 04 11.13 0.438 0.082 0.47 30.28 1.192 J L
EI 008AA 05 12.70 0.500 0.068 0.39 35.74 1.407 J L
EI 008AA 06 15.88 0.625 0.051 0.29 46.74 1.840 J L
EI 008AA 07 19.05 0.750 0.040 0.23 57.73 2.273 J L
EI 008AA 08 22.23 0.875 0.034 0.19 68.73 2.706 J L
EI 009AA 01 0.23 0.009 2.47 0.56 0.22 0.05 6.35 0.250 0.389 2.22 12.12 0.477 J L
EI 009AA 02 7.95 0.313 0.256 1.46 16.74 0.659 J L
EI 009AA 03 9.53 0.375 0.191 1.09 21.29 0.838 J L
EI 009AA 04 11.13 0.438 0.152 0.87 25.91 1.020 J L
EI 009AA 05 12.70 0.500 0.127 0.72 30.43 1.198 J L
EI 009AA 06 15.88 0.625 0.095 0.54 39.60 1.559 J L
EI 009AA 07 19.05 0.750 0.076 0.43 48.74 1.919 J L
EI 009AA 08 22.23 0.875 0.063 0.36 57.91 2.280 J L
EI 011AA 01 0.28 0.011 4.58 1.03 0.40 0.09 6.35 0.250 1.104 6.30 10.13 0.399 J L
EI 011AA 02 7.95 0.313 0.737 4.21 13.61 0.536 J L
EI 011AA 03 9.53 0.375 0.556 3.17 17.04 0.671 J L
EI 011AA 04 11.13 0.438 0.444 2.54 20.52 0.808 J L
EI 011AA 05 12.70 0.500 0.371 2.12 23.95 0.943 J L
EI 011AA 06 15.88 0.625 0.279 1.59 30.89 1.216 J L
EI 011AA 07 19.05 0.750 0.223 1.27 37.80 1.488 J L
EI 011AA 08 22.23 0.875 0.186 1.06 44.70 1.760 J L
*Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 145
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
EIM020A 01 2.00 0.079 0.20 0.008 1.70 0.38 0.13 0.03 10.00 0.394 0.099 0.56 25.86 1.018 K M
EIM020A 02 12.50 0.492 0.070 0.40 34.75 1.368 K M
EIM020A 03 15.00 0.591 0.055 0.31 43.64 1.718 K M
EIM020A 04 17.50 0.689 0.045 0.26 52.55 2.069 K M
EIM020A 05 20.00 0.787 0.038 0.22 61.44 2.419 K M
EIM025A 01 0.25 0.010 3.37 0.76 0.27 0.06 10.00 0.394 0.325 1.86 19.53 0.769 K M
EIM025A 02 12.50 0.492 0.232 1.33 25.83 1.017 K M
EIM025A 03 15.00 0.591 0.181 1.03 32.16 1.266 K M
EIM025A 04 17.50 0.689 0.148 0.84 38.48 1.515 K M
EIM025A 05 20.00 0.787 0.125 0.71 44.78 1.763 K M
EIM025A 06 22.50 0.886 0.108 0.62 51.10 2.012 K M
EIM025A 07 25.00 0.984 0.096 0.55 57.43 2.261 K M
EI 010B 01 2.39 0.094 0.25 0.010 2.67 0.60 0.22 0.05 9.53 0.375 0.210 1.20 21.21 0.835 K M
EI 010B 02 11.13 0.438 0.165 0.94 26.11 1.028 J L
EI 010B 03 12.70 0.500 0.133 0.76 30.99 1.220 J L
EI 010B 04 15.88 0.625 0.098 0.56 40.77 1.605 J L
EI 010B 05 19.05 0.750 0.077 0.44 50.80 2.000 J L
EI 010B 06 22.23 0.875 0.063 0.36 61.09 2.405 J L
EI 010B 07 25.40 1.000 0.054 0.31 70.36 2.770 J L
EI 011B 01 0.28 0.011 3.56 0.80 0.31 0.07 9.53 0.375 0.350 2.00 18.92 0.745 J L
EI 011B 02 11.13 0.438 0.268 1.53 23.32 0.918 J L
EI 011B 03 12.70 0.500 0.221 1.26 27.43 1.080 J L
EI 011B 04 15.88 0.625 0.163 0.93 35.69 1.405 J L
EI 011B 05 19.05 0.750 0.128 0.73 44.45 1.750 J L
EI 011B 06 22.23 0.875 0.105 0.60 53.21 2.095 J L
EI 011B 07 25.40 1.000 0.091 0.52 60.96 2.400 J L
EI 012B 01 0.30 0.012 4.45 1.00 0.44 0.10 9.53 0.375 0.560 3.20 16.64 0.655 J L
EI 012B 02 11.13 0.438 0.420 2.40 20.78 0.818 J L
EI 012B 03 12.70 0.500 0.350 2.00 24.13 0.950 J L
EI 012B 04 15.88 0.625 0.263 1.50 31.12 1.225 J L
EI 012B 05 19.05 0.750 0.210 1.20 38.10 1.500 J L
EI 012B 06 22.23 0.875 0.168 0.96 46.10 1.815 J L
EI 012B 07 25.40 1.000 0.144 0.82 53.34 2.100 J L
EI 013B 01 0.33 0.013 5.56 1.25 0.58 0.13 9.53 0.375 0.841 4.80 15.37 0.605 J L
EI 013B 02 11.13 0.438 0.648 3.70 18.75 0.738 J L
EI 013B 03 12.70 0.500 0.543 3.10 21.84 0.860 J L
EI 013B 04 15.88 0.625 0.396 2.26 28.58 1.125 J L
EI 013B 05 19.05 0.750 0.315 1.80 34.80 1.370 J L
EI 013B 06 22.23 0.875 0.263 1.50 41.28 1.625 J L
EI 013B 07 25.40 1.000 0.222 1.27 47.75 1.880 J L
EI 014B 01 0.36 0.014 6.67 1.50 0.76 0.17 9.53 0.375 1.243 7.10 14.35 0.565 J L
EI 014B 02 11.13 0.438 0.963 5.50 17.22 0.678 J L
EI 014B 03 12.70 0.500 0.806 4.60 20.07 0.790 J L
EI 014B 04 15.88 0.625 0.595 3.40 25.78 1.015 J L
EI 014B 05 19.05 0.750 0.473 2.70 31.50 1.240 J L
EI 014B 06 22.23 0.875 0.385 2.20 37.47 1.475 J L
EI 014B 07 25.40 1.000 0.333 1.90 43.18 1.700 J L
EI 016B 01 0.41 0.016 10.05 2.26 0.85 0.19 9.53 0.375 2.487 14.20 13.23 0.521 J L
EI 016B 02 11.13 0.438 1.926 11.00 15.90 0.626 J L
EI 016B 03 12.70 0.500 1.611 9.20 18.42 0.725 J L
EI 016B 04 15.88 0.625 1.191 6.80 23.60 0.929 J L
EI 016B 05 19.05 0.750 0.928 5.30 28.98 1.141 J L
EI 016B 06 22.23 0.875 0.771 4.40 34.16 1.345 J L
EI 016B 07 25.40 1.000 0.648 3.70 39.60 1.559 J L
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
146 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
EIM025B 01 2.50 0.098 0.25 0.010 2.45 0.55 0.18 0.04 9.50 0.374 0.168 0.96 22.96 0.904 K M
EIM025B 02 11.00 0.433 0.131 0.75 28.27 1.113 K M
EIM025B 03 12.50 0.492 0.107 0.61 33.83 1.332 K M
EIM025B 04 15.50 0.610 0.079 0.45 44.20 1.740 K M
EIM025B 05 19.00 0.748 0.060 0.34 57.10 2.248 K M
EIM025B 06 22.00 0.866 0.051 0.29 66.70 2.626 K M
EIM025B 07 25.00 0.984 0.042 0.24 79.10 3.114 K M
EIM030B 01 0.30 0.012 4.61 1.04 0.40 0.09 10.00 0.394 0.490 2.80 18.59 0.732 K M
EIM030B 02 12.50 0.492 0.333 1.90 25.12 0.989 K M
EIM030B 03 15.00 0.591 0.253 1.44 31.65 1.246 K M
EIM030B 04 17.50 0.689 0.203 1.16 38.18 1.503 K M
EIM030B 05 20.00 0.787 0.170 0.97 44.70 1.760 K M
EIM030B 06 22.50 0.886 0.146 0.84 51.23 2.017 K M
EIM030B 07 25.00 0.984 0.128 0.73 57.76 2.274 K M
EI 010C 01 2.77 0.109 0.25 0.010 2.34 0.53 0.22 0.05 9.53 0.375 0.144 0.82 24.26 0.955 J L
EI 010C 02 11.13 0.438 0.107 0.61 30.84 1.214 J L
EI 010C 03 12.70 0.500 0.086 0.49 37.29 1.468 J L
EI 010C 04 15.88 0.625 0.061 0.35 50.34 1.982 J L
EI 010C 05 19.05 0.750 0.048 0.27 63.40 2.496 J L
EI 010C 06 22.23 0.875 0.039 0.22 76.45 3.010 J L
EI 010C 07 25.40 1.000 0.033 0.19 89.51 3.524 J L
EI 011C 01 0.28 0.011 3.13 0.70 0.29 0.07 9.53 0.375 0.235 1.34 21.62 0.851 J L
EI 011C 02 11.13 0.438 0.176 1.01 27.23 1.072 J L
EI 011C 03 12.70 0.500 0.141 0.81 32.77 1.290 J L
EI 011C 04 15.88 0.625 0.101 0.58 43.92 1.729 J L
EI 011C 05 19.05 0.750 0.079 0.45 55.09 2.169 J L
EI 011C 06 22.23 0.875 0.064 0.37 66.24 2.608 J L
EI 011C 07 25.40 1.000 0.055 0.31 77.39 3.047 J L
EI 012C 01 0.30 0.012 4.07 0.92 0.38 0.09 9.53 0.375 0.368 2.10 19.56 0.770 J L
EI 012C 02 11.13 0.438 0.277 1.58 24.43 0.962 J L
EI 012C 03 12.70 0.500 0.223 1.27 29.24 1.151 J L
EI 012C 04 15.88 0.625 0.160 0.91 38.94 1.533 J L
EI 012C 05 19.05 0.750 0.125 0.71 48.62 1.914 J L
EI 012C 06 22.23 0.875 0.102 0.58 58.32 2.296 J L
EI 012C 07 25.40 1.000 0.087 0.50 68.00 2.677 J L
EI 013C 01 0.33 0.013 5.19 1.17 0.47 0.11 9.53 0.375 0.558 3.19 17.98 0.708 J L
EI 013C 02 11.13 0.438 0.422 2.41 22.30 0.878 J L
EI 013C 03 12.70 0.500 0.340 1.94 26.57 1.046 J L
EI 013C 04 15.88 0.625 0.245 1.40 35.15 1.384 J L
EI 013C 05 19.05 0.750 0.191 1.09 43.74 1.722 J L
EI 013C 06 22.23 0.875 0.157 0.90 52.32 2.060 J L
EI 013C 07 25.40 1.000 0.133 0.76 60.91 2.398 J L
EI 014C 01 0.36 0.014 6.51 1.46 0.58 0.13 9.53 0.375 0.821 4.69 16.74 0.659 J L
EI 014C 02 11.13 0.438 0.623 3.56 20.65 0.813 J L
EI 014C 03 12.70 0.500 0.504 2.88 24.46 0.963 J L
EI 014C 04 15.88 0.625 0.363 2.07 32.21 1.268 J L
EI 014C 05 19.05 0.750 0.284 1.62 39.93 1.572 J L
EI 014C 06 22.23 0.875 0.233 1.33 47.65 1.876 J L
EI 014C 07 25.40 1.000 0.198 1.13 55.37 2.180 J L
EIM030C 01 3.00 0.118 0.30 0.012 3.74 0.84 0.33 0.08 10.00 0.394 0.323 1.85 20.52 0.808 K M
EIM030C 02 12.50 0.492 0.205 1.17 29.13 1.147 K M
EIM030C 03 15.00 0.591 0.150 0.86 37.74 1.486 K M
EIM030C 04 17.50 0.689 0.118 0.67 46.33 1.824 K M
EIM030C 05 20.00 0.787 0.097 0.56 54.94 2.163 K M
EIM030C 06 22.50 0.886 0.083 0.47 63.55 2.502 K M
EIM030C 07 25.00 0.984 0.072 0.41 72.16 2.841 K M
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 147
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
EIM030D 01 4.00 0.157 0.30 0.012 2.73 0.61 0.25 0.06 10.00 0.394 0.234 1.34 20.65 0.813 K M
EIM030D 02 12.50 0.492 0.113 0.64 34.57 1.361 K M
EIM030D 03 15.00 0.591 0.074 0.42 48.49 1.909 K M
EIM030D 04 17.50 0.689 0.055 0.32 62.41 2.457 K M
EIM030D 05 20.00 0.787 0.044 0.25 76.33 3.005 K M
EIM030D 06 22.50 0.886 0.037 0.21 90.25 3.553 K M
EIM030D 07 25.00 0.984 0.031 0.18 104.17 4.101 K M
EIM030D 08 27.50 1.083 0.027 0.16 118.08 4.649 K M
EIM030D 09 30.00 1.181 0.024 0.14 132.00 5.197 K M
LEM050ZA 01† 2.50 0.098 0.50 0.020 16.10 3.62 2.45 0.55 7.90 0.311 7.980 45.57 9.61 0.378 K M
LEM050ZA 02† 10.90 0.429 4.980 28.44 13.64 0.537 K M
LEM050ZA 03† 15.40 0.606 3.190 18.22 19.68 0.775 K M
LEM055ZB 01† 2.80 0.110 0.55 0.022 19.00 4.27 2.79 0.63 8.80 0.346 8.180 46.71 10.78 0.424 J L
LEM055ZB 02† 12.10 0.476 5.110 29.18 15.27 0.601 J L
LEM055ZB 03† 17.00 0.669 3.270 18.67 21.96 0.865 J L
LEM035A 01 3.00 0.118 0.35 0.014 4.90 1.10 0.53 0.12 12.50 0.492 0.387 2.21 23.67 0.932 J L
LEM035A 02 14.00 0.551 0.322 1.84 27.46 1.081 J L
LEM035A 03 15.50 0.610 0.277 1.58 31.24 1.230 J L
LEM035A 04 17.00 0.669 0.242 1.38 35.03 1.379 J L
LEM035A 05 19.00 0.748 0.208 1.19 39.83 1.568 J L
LEM035A 06 21.00 0.827 0.182 1.04 44.88 1.767 J L
LEM035A 07 23.00 0.906 0.161 0.92 50.19 1.976 J L
LEM035A 08 25.00 0.984 0.145 0.83 54.97 2.164 J L
LEM035A 09 30.00 1.181 0.117 0.67 67.08 2.641 K M
LEM035A 10 35.00 1.378 0.096 0.55 80.21 3.158 K M
LEM035A 11 40.00 1.575 0.084 0.48 91.82 3.615 K M
LEM063A 01† 0.63 0.25 26.2 05.89 4.19 0.94 9.70 0.382 12.100 69.09 11.55 0.455 J L
LEM063A 02† 13.50 0.531 7.510 42.88 16.46 0.648 J L
LEM063A 03† 19.20 0.756 4.810 27.47 23.82 0.938 J L
LE 014A 01 3.18 0.125 0.36 0.014 4.89 1.10 0.53 0.12 12.70 0.500 0.350 2.00 25.15 0.990 J L
LE 014A 02 14.30 0.563 0.289 1.65 29.29 1.153 J L
LE 014A 03 15.88 0.625 0.245 1.40 33.66 1.325 J L
LE 014A 04 19.05 0.750 0.189 1.08 42.16 1.660 J L
LE 014A 05 20.65 0.813 0.170 0.97 46.30 1.823 J L
LE 014A 06 22.23 0.875 0.154 0.88 50.42 1.985 J L
LE 014A 07 23.83 0.938 0.142 0.81 54.56 2.148 J L
LE 014A 08 25.40 1.000 0.131 0.75 58.67 2.310 K M
LE 014A 09 28.58 1.125 0.113 0.64 67.44 2.655 K M
LE 014A 10 31.75 1.250 0.099 0.57 75.44 2.970 K M
LE 014A 11 34.93 1.375 0.088 0.50 84.71 3.335 K M
LE 014A 12 38.10 1.500 0.080 0.46 92.81 3.654 K M
LE 016A 002 0.41 0.016 7.12 1.60 0.89 0.20 12.70 0.500 0.718 4.10 21.34 0.840 J L
LE 016A 001 15.88 0.625 0.501 2.86 28.32 1.115 J L
LE 016A 00 19.05 0.750 0.368 2.10 36.07 1.420 J L
LE 016A 0 22.23 0.875 0.306 1.75 42.55 1.675 J L
LE 016A 01 25.40 1.000 0.263 1.50 49.02 1.930 K L
LE 016A 02 28.58 1.125 0.228 1.30 56.01 2.205 K L
LE 016A 03 31.75 1.250 0.210 1.20 61.47 2.420 K L
LE 016A 04 34.93 1.375 0.175 1.00 70.49 2.775 K L
LE 016A 05 38.10 1.500 0.158 0.90 77.72 3.060 L N
LE 016A 06 44.45 1.750 0.137 0.78 89.92 3.540 L N
LE 016A 07 50.80 2.000 0.118 0.68 103.12 4.060 M P
LE 018A 002 0.46 0.018 9.79 2.20 1.33 0.30 12.70 0.500 1.328 7.58 19.05 0.750 J L
LE 018A 001 15.88 0.625 0.937 5.35 25.02 0.985 J L
LE 018A 00 19.05 0.750 0.701 4.00 31.24 1.230 J L
LE 018A 0 22.23 0.875 0.578 3.30 36.96 1.455 J L
LE 018A 01 25.40 1.000 0.508 2.90 42.16 1.660 K M
LE 018A 02 28.58 1.125 0.438 2.50 47.88 1.885 K M
LE 018A 03 31.75 1.250 0.385 2.20 53.59 2.110 K M
LE 018A 04 34.93 1.375 0.350 2.00 59.06 2.325 K M
* Finish may be based on Pre-coated Tin wire, or Pre-coated Zinc wire, at Lee Spring’s discretion.
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
148 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 018A 05 3.18 0.125 0.46 0.018 9.79 2.20 1.33 0.30 38.10 1.500 0.315 1.80 65.02 2.560 L N
LE 018A 06 44.45 1.750 0.263 1.50 76.71 3.020 L N
LE 018A 07 50.80 2.000 0.228 1.30 87.88 3.460 M P
LE 018A 08 57.15 2.250 0.198 1.13 99.82 3.930 M P
LE 020A 002 0.51 0.020 12.90 2.90 1.78 0.40 12.70 0.500 2.343 13.38 17.53 0.690 J L
LE 020A 001 15.88 0.625 1.650 9.42 22.73 0.895 J L
LE 020A 00 19.05 0.750 1.313 7.50 27.43 1.080 J L
LE 020A 0 22.23 0.875 1.051 6.00 32.89 1.295 J L
LE 020A 01 25.40 1.000 0.893 5.10 37.85 1.490 K M
LE 020A 02 28.58 1.125 0.771 4.40 43.05 1.695 K M
LE 020A 03 31.75 1.250 0.683 3.90 48.01 1.890 K M
LE 020A 04 34.93 1.375 0.613 3.50 52.96 2.085 K M
LE 020A 05 38.10 1.500 0.560 3.20 57.91 2.280 L N
LE 020A 06 44.45 1.750 0.473 2.70 68.07 2.680 L N
LE 020A 07 50.80 2.000 0.403 2.30 78.49 3.090 M P
LE 020A 08 57.15 2.250 0.350 2.00 88.90 3.500 M P
LE 022A 01 0.56 0.022 17.35 3.90 2.00 0.45 15.88 0.625 2.820 16.10 21.21 0.835 J L
LE 022A 02 19.05 0.750 2.172 12.40 26.16 1.030 J L
LE 022A 03 22.23 0.875 1.786 10.20 30.86 1.215 J L
LE 022A 04 25.40 1.000 1.524 8.70 35.56 1.400 K M
LE 022A 05 28.58 1.125 1.313 7.50 40.26 1.585 K M
LE 022A 06 31.75 1.250 1.156 6.60 44.96 1.770 K M
LE 022A 07 34.93 1.375 1.051 6.00 49.40 1.945 K M
LE 022A 08 38.10 1.500 0.946 5.40 54.36 2.140 L N
LE 022A 09 44.45 1.750 0.788 4.50 64.01 2.520 L N
LE 022A 10 50.80 2.000 0.683 3.90 73.15 2.880 M P
LE 022A 11 57.15 2.250 0.599 3.42 82.80 3.260 M P
LE 022A 12 63.50 2.500 0.534 3.05 92.20 3.630 M P
LEM050AB 01† 3.50 0.138 0.50 0.020 12.00 2.7 1.77 0.4 9.50 0.374 2.350 13.42 13.82 0.544 J L
LEM050AB 02† 12.50 0.492 1.470 8.39 19.41 0.764 J L
LEM050AB 03† 17.00 0.669 0.940 5.37 27.80 1.094 J L
LEM050AB 04† 24.50 0.965 0.590 3.37 41.80 1.646 K M
LEM050AB 05† 290.00 11.417 0.050 0.29 500.00 19.685 BC BD
LEM055AB 01† 0.55 0.022 15.70 3.5 32.38 0.54 9.90 0.390 3.630 20.73 13.58 0.535 J L
LEM055AB 02† 13.20 0.520 2.270 12.96 19.09 0.752 J L
LEM055AB 03† 18.10 0.713 1.450 8.28 27.30 1.075 J L
LEM055AB 04† 26.40 1.039 0.900 5.14 41.10 1.618 K M
LEM070AB 01† 0.70 0.28 30.70 6.90 4.47 1.01 11.10 0.437 11.100 63.38 13.46 0.530 K M
LEM070AB 02† 15.30 0.602 6.950 39.69 19.08 0.751 K M
LEM070AB 03† 21.60 0.850 4.440 25.35 27.50 1.083 K M
LEM080AC 01† 4.00 0.157 0.80 0.031 39.90 8.97 5.96 1.34 12.60 0.496 12.700 72.52 15.26 0.601 J L
LEM080AC 02† 17.40 0.685 8.000 45.68 21.66 0.853 J L
LEM080AC 03† 24.60 0.969 5.100 29.12 31.26 1.231 K M
LEM045B 01 4.50 0.177 0.45 0.018 6.85 1.54 0.62 0.14 15.50 0.610 0.366 2.09 32.51 1.280 J L
LEM045B 02 17.00 0.669 0.306 1.75 37.31 1.469 J L
LEM045B 03 19.00 0.748 0.252 1.44 43.64 1.718 J L
LEM045B 04 21.00 0.827 0.215 1.23 49.96 1.967 K M
LEM045B 05 23.00 0.906 0.187 1.07 56.29 2.216 K M
LEM045B 06 25.00 0.984 0.166 0.95 62.33 2.454 K M
LEM045B 07 30.00 1.181 0.128 0.73 78.77 3.101 K M
LEM045B 08 35.00 1.378 0.105 0.60 94.18 3.708 L N
LEM045B 09 40.00 1.575 0.089 0.51 109.86 4.325 L N
LEM045B 10 45.00 1.772 0.077 0.44 125.78 4.952 L N
LEM045B 11 50.00 1.969 0.068 0.39 141.20 5.559 M P
LEM045B 12 55.00 2.165 0.061 0.35 156.59 6.165 M P
LEM045B 13 60.00 2.362 0.054 0.31 174.80 6.882 M P
LEM060B 01 0.60 0.024 15.70 3.53 1.87 0.4 15.50 0.610 1.632 9.32 23.88 0.940 J L
LEM060B 02 17.00 0.669 1.384 7.90 26.90 1.059 J L
LEM060B 03 19.00 0.748 1.149 6.56 30.94 1.218 J L
LEM060B 04 21.00 0.827 0.982 5.61 34.98 1.377 K M
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 149
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LEM060B 05 4.50 0.177 0.60 0.024 15.70 3.53 1.87 0.42 23.00 0.906 0.858 4.90 39.01 1.536 K M
LEM060B 06 25.00 0.984 0.762 4.35 43.03 1.694 K M
LEM060B 07 30.00 1.181 0.594 3.39 53.37 2.101 K M
LEM060B 08 35.00 1.378 0.487 2.78 63.45 2.498 L N
LEM060B 09 40.00 1.575 0.413 2.36 73.53 2.895 L N
LEM060B 10 45.00 1.772 0.359 2.05 83.62 3.292 L N
LEM060B 11 50.00 1.969 0.317 1.81 93.70 3.689 M P
LEM060B 12 55.00 2.165 0.284 1.62 103.76 4.085 M P
LEM060B 13 60.00 2.362 0.257 1.47 113.84 4.482 M P
LEM063B 01† 0.63 0.025 18.30 4.11 2.61 0.59 12.10 0.476 2.770 15.82 17.75 0.699 J L
LEM063B 02† 15.90 0.626 1.730 9.88 24.94 0.982 J L
LEM063B 03† 21.60 0.850 1.110 6.34 35.70 1.406 K M
LEM063B 04† 31.00 1.220 0.700 4.00 53.60 2.110 K M
LEM090B 01† 0.90 0.035 49.70 11.17 7.45 1.68 14.20 0.559 14.300 81.66 17.15 0.675 J L
LEM090B 02† 19.60 0.772 8.960 51.16 24.32 0.957 K M
LEM090B 03† 27.70 1.091 5.730 32.72 35.08 1.381 K M
LE 014B 01 4.78 0.188 0.36 0.014 3.56 0.80 0.18 0.04 15.88 0.625 0.093 0.53 52.20 2.055 J L
LE 014B 02 22.23 0.875 0.049 0.28 91.06 3.585 J L
LE 014B 03 25.40 1.000 0.040 0.23 109.22 4.300 K M
LE 014B 04 28.58 1.125 0.033 0.19 130.18 5.125 K M
LE 014B 05 31.75 1.250 0.030 0.17 145.29 5.720 K M
LE 014B 06 34.93 1.375 0.026 0.15 163.70 6.445 K M
LE 014B 07 38.10 1.500 0.023 0.13 186.69 7.350 L N
LE 014B 08 41.28 1.625 0.021 0.12 202.06 7.955 L N
LE 014B 09 44.45 1.750 0.019 0.11 219.96 8.660 L N
LE 014B 10 47.63 1.875 0.018 0.10 240.67 9.475 L N
LE 014B 11 50.80 2.000 0.016 0.09 265.18 10.440 M P
LE 014B 12 57.15 2.250 0.014 0.08 298.45 11.750 M P
LE 014B 13 63.50 2.500 0.012 0.07 339.34 13.360 M P
LE 016B 01 0.41 0.016 5.34 1.20 0.36 0.08 15.88 0.625 0.182 1.04 43.31 1.705 J L
LE 016B 02 22.23 0.875 0.100 0.57 72.14 2.840 J L
LE 016B 03 25.40 1.000 0.081 0.46 87.12 3.430 K M
LE 016B 04 28.58 1.125 0.068 0.39 101.47 3.995 K M
LE 016B 05 31.75 1.250 0.060 0.34 115.32 4.540 K M
LE 016B 06 34.93 1.375 0.053 0.30 129.67 5.105 K M
LE 016B 07 38.10 1.500 0.046 0.26 147.57 5.810 L N
LE 016B 08 41.28 1.625 0.042 0.24 159.89 6.295 L N
LE 016B 09 44.45 1.750 0.039 0.22 173.74 6.840 L N
LE 016B 10 47.63 1.875 0.035 0.20 189.87 7.475 L N
LE 016B 11 50.80 2.000 0.032 0.18 208.79 8.220 M P
LE 016B 12 57.15 2.250 0.028 0.16 234.95 9.250 M P
LE 016B 13 63.50 2.500 0.025 0.14 266.70 10.500 M P
LE 018B 01 0.46 0.018 6.67 1.50 0.62 0.14 15.88 0.625 0.333 1.90 34.16 1.345 J L
LE 018B 02 22.23 0.875 0.184 1.05 55.25 2.175 J L
LE 018B 03 25.40 1.000 0.151 0.86 65.53 2.580 K M
LE 018B 04 28.58 1.125 0.128 0.73 75.82 2.985 K M
LE 018B 05 31.75 1.250 0.110 0.63 86.61 3.410 K M
LE 018B 06 34.93 1.375 0.096 0.55 97.66 3.845 K M
LE 018B 07 38.10 1.500 0.088 0.50 107.19 4.220 L N
LE 018B 08 41.28 1.625 0.079 0.45 117.98 4.645 L N
LE 018B 09 44.45 1.750 0.072 0.41 128.78 5.070 L N
LE 018B 10 47.63 1.875 0.067 0.38 138.56 5.455 L N
LE 018B 11 50.80 2.000 0.061 0.35 149.61 5.890 M P
LE 018B 12 57.15 2.250 0.053 0.30 172.21 6.780 M P
LE 018B 13 63.50 2.500 0.047 0.27 191.52 7.540 M P
LE 020B 01 0.51 0.020 8.90 2.00 0.98 0.22 15.88 0.625 0.578 3.30 29.59 1.165 J L
LE 020B 02 22.23 0.875 0.315 1.80 47.37 1.865 J L
LE 020B 03 25.40 1.000 0.263 1.50 55.63 2.190 K M
LE 020B 04 28.58 1.125 0.228 1.30 63.37 2.495 K M
LE 020B 05 31.75 1.250 0.193 1.10 72.90 2.870 K M
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
150 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 020B 06 4.78 0.188 0.51 0.020 8.90 2.00 0.98 0.22 34.93 1.375 0.170 0.97 81.66 3.215 K M
LE 020B 07 38.10 1.500 0.152 0.87 90.17 3.550 L N
LE 020B 08 41.28 1.625 0.138 0.79 98.43 3.875 L N
LE 020B 09 44.45 1.750 0.126 0.72 107.19 4.220 L N
LE 020B 10 47.63 1.875 0.116 0.66 116.21 4.575 L N
LE 020B 11 50.80 2.000 0.107 0.61 124.97 4.920 M P
LE 020B 12 57.15 2.250 0.093 0.53 142.49 5.610 M P
LE 020B 13 63.50 2.500 0.082 0.47 159.77 6.290 M P
LE 022B 002 0.56 0.022 11.12 2.50 1.33 0.30 12.70 0.500 1.524 8.70 19.05 0.750 J L
LE 022B 001 15.88 0.625 0.946 5.40 26.29 1.035 J L
LE 022B 00 19.05 0.750 0.666 3.80 33.78 1.330 J L
LE 022B 0 22.23 0.875 0.560 3.20 39.75 1.565 K M
LE 022B 01 25.40 1.000 0.438 2.50 47.75 1.880 K M
LE 022B 02 28.58 1.125 0.368 2.10 55.25 2.175 K M
LE 022B 03 31.75 1.250 0.315 1.80 62.74 2.470 K M
LE 022B 04 34.93 1.375 0.280 1.60 69.98 2.755 K M
LE 022B 05 38.10 1.500 0.245 1.40 77.98 3.070 L N
LE 022B 06 44.45 1.750 0.210 1.20 90.93 3.580 L N
LE 022B 07 50.80 2.000 0.175 1.00 106.68 4.200 M P
LE 022B 08 57.15 2.250 0.156 0.89 119.89 4.720 M P
LE 022B 09 63.50 2.500 0.137 0.78 135.13 5.320 M P
LE 024B 01 0.61 0.024 15.12 3.40 1.78 0.40 15.88 0.625 1.489 8.50 24.77 0.975 J L
LE 024B 02 17.48 0.688 1.261 7.20 28.14 1.108 J L
LE 024B 03 19.05 0.750 1.051 6.00 31.75 1.250 J L
LE 024B 04 20.65 0.813 0.928 5.30 35.13 1.383 K M
LE 024B 05 22.23 0.875 0.841 4.80 38.23 1.505 K M
LE 024B 06 23.83 0.938 0.753 4.30 41.61 1.638 K M
LE 024B 07 25.40 1.000 0.701 4.00 44.45 1.750 K M
LE 024B 08 28.58 1.125 0.588 3.36 51.18 2.015 K M
LE 024B 09 31.75 1.250 0.510 2.91 57.91 2.280 K M
LE 024B 10 34.93 1.375 0.450 2.57 64.64 2.545 L N
LE 024B 11 38.10 1.500 0.403 2.30 71.12 2.800 L N
LE 024B 12 44.45 1.750 0.333 1.90 84.58 3.330 M P
LE 024B 13 50.80 2.000 0.284 1.62 97.79 3.850 M P
LE 024B 14 57.15 2.250 0.249 1.42 110.74 4.360 M P
LE 024B 15 63.50 2.500 0.221 1.26 123.95 4.880 M P
LE 026B 002 0.66 0.026 19.13 4.30 2.22 0.50 12.70 0.500 3.590 20.50 17.53 0.690 J L
LE 026B 001 15.88 0.625 2.212 12.63 23.50 0.925 J L
LE 026B 00 19.05 0.750 1.664 9.50 29.21 1.150 K M
LE 026B 0 22.23 0.875 1.296 7.40 35.18 1.385 K M
LE 026B 01 25.40 1.000 1.068 6.10 41.15 1.620 K M
LE 026B 02 28.58 1.125 0.893 5.10 47.63 1.875 K M
LE 026B 03 31.75 1.250 0.788 4.50 53.09 2.090 K M
LE 026B 04 34.93 1.375 0.701 4.00 59.06 2.325 L N
LE 026B 05 38.10 1.500 0.613 3.50 65.79 2.590 L N
LE 026B 06 44.45 1.750 0.508 2.90 77.72 3.060 M P
LE 026B 07 50.80 2.000 0.438 2.50 89.41 3.520 M P
LE 026B 08 57.15 2.250 0.385 2.20 101.09 3.980 M P
LE 026B 09 63.50 2.500 0.338 1.93 113.54 4.470 M P
LE 029B 01 0.74 0.029 25.80 5.80 3.34 0.75 15.88 0.625 3.923 22.40 21.72 0.855 J L
LE 029B 02 17.48 0.688 3.363 19.20 24.08 0.948 J L
LE 029B 03 19.05 0.750 2.942 16.80 26.67 1.050 K M
LE 029B 04 20.65 0.813 2.609 14.90 29.29 1.153 K M
LE 029B 05 22.23 0.875 2.294 13.10 32.13 1.265 K M
LE 029B 06 23.83 0.938 2.102 12.00 34.49 1.358 K M
LE 029B 07 25.40 1.000 1.926 11.00 37.08 1.460 K M
LE 029B 08 28.58 1.125 1.625 9.28 42.29 1.665 K M
LE 029B 09 31.75 1.250 1.417 8.09 47.50 1.870 L N
LE 029B 10 34.93 1.375 1.256 7.17 52.71 2.075 L N
LE 029B 11 38.10 1.500 1.128 6.44 57.91 2.280 M P
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 151
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 029B 12 4.78 0.188 0.74 0.029 25.80 5.80 3.34 0.75 44.45 1.750 0.933 5.33 68.58 2.700 M P
LE 029B 13 50.80 2.000 0.799 4.56 78.99 3.110 M P
LE 029B 14 57.15 2.250 0.702 4.01 89.15 3.510 M P
LE 029B 15 63.50 2.500 0.620 3.54 99.82 3.930 M P
LE 031B 002 0.79 0.031 31.14 7.00 3.78 0.85 12.70 0.500 9.107 52.00 15.75 0.620 J L
LE 031B 001 15.88 0.625 5.555 31.72 20.70 0.815 J L
LE 031B 00 19.05 0.750 4.221 24.10 25.65 1.010 K M
LE 031B 0 22.23 0.875 3.328 19.00 30.35 1.195 K M
LE 031B 01 25.40 1.000 2.767 15.80 35.31 1.390 K M
LE 031B 02 28.58 1.125 2.364 13.50 40.26 1.585 L N
LE 031B 03 31.75 1.250 2.049 11.70 45.21 1.780 L N
LE 031B 04 34.93 1.375 1.821 10.40 49.91 1.965 L N
LE 031B 05 38.10 1.500 1.611 9.20 55.12 2.170 M P
LE 031B 06 44.45 1.750 1.349 7.70 64.77 2.550 M P
LE 031B 07 50.80 2.000 1.156 6.60 74.42 2.930 M P
LE 031B 08 57.15 2.250 0.998 5.70 84.58 3.330 M P
LE 031B 09 63.50 2.500 0.893 5.10 94.23 3.710 N Q
LE 031B 10 69.85 2.750 0.788 4.50 104.65 4.120 N Q
LE 034B 01 0.86 0.034 40.03 9.00 4.00 0.90 15.88 0.625 9.335 53.30 19.69 0.775 J L
LE 034B 02 19.05 0.750 7.005 40.00 24.13 0.950 K M
LE 034B 03 22.23 0.875 5.429 31.00 28.83 1.135 K M
LE 034B 04 25.40 1.000 4.553 26.00 33.27 1.310 K M
LE 034B 05 28.58 1.125 3.923 22.40 37.72 1.485 L N
LE 034B 06 31.75 1.250 3.380 19.30 42.42 1.670 L N
LE 034B 07 34.93 1.375 3.012 17.20 46.86 1.845 L N
LE 034B 08 38.10 1.500 2.715 15.50 51.31 2.020 M P
LE 034B 09 44.45 1.750 2.259 12.90 60.45 2.380 M P
LE 034B 10 50.80 2.000 1.926 11.00 69.60 2.740 M P
LE 034B 11 57.15 2.250 1.681 9.60 78.49 3.090 M P
LE 034B 12 63.50 2.500 1.489 8.50 87.63 3.450 N Q
LE 034B 13 69.85 2.750 1.331 7.60 97.03 3.820 N Q
LEM070BA 01† 5.00 0.197 0.70 0.028 22.60 5.08 3.39 0.76 13.50 0.531 3.070 17.53 19.75 0.778 J L
LEM070BA 02† 17.70 0.697 1.920 10.96 27.70 1.091 J L
LEM070BA 03† 24.00 0.945 1.230 7.02 39.60 1.559 K L
LEM070BA 04† 34.50 1.358 0.770 4.40 59.50 2.343 L N
LEM100BA 01† 1.00 0.039 60.80 13.67 7.52 1.69 15.80 0.622 15.900 90.79 19.05 0.750 J L
LEM100BA 02† 21.80 0.858 9.900 56.53 27.00 1.063 K M
LEM100BA 03† 30.80 1.213 6.370 36.37 38.90 1.531 L N
LEM050BB 01† 5.50 0.217 0.50 0.020 7.80 1.75 1.02 0.23 12.70 0.500 0.510 2.91 25.80 1.016 J L
LEM050BB 02† 15.70 0.618 0.310 1.77 36.60 1.441 J L
LEM050BB 03† 20.20 0.795 0.210 1.20 52.90 2.083 J L
LEM050BB 04† 27.70 1.091 0.130 0.74 80.00 3.150 K M
LEM050BB 05† 37.70 1.484 0.090 0.51 116.10 4.571 L N
LEM080BB 01† 0.80 0.031 30.20 6.79 4.79 1.08 15.00 0.591 4.000 22.84 21.40 0.843 J L
LEM080BB 02† 19.80 0.780 2.500 14.28 30.00 1.181 K M
LEM080BB 03† 27.00 1.063 1.600 9.14 43.00 1.693 L N
LEM080BB 04† 39.00 1.535 1.000 5.71 64.60 2.543 M P
LEM080BB 05† 290.00 11.417 0.110 0.63 515.00 20.276 BC BD
LEM110BB 01† 1.10 0.043 72.80 16.37 10.77 2.42 17.40 0.685 17.500 99.93 20.94 0.824 K M
LEM110BB 02† 24.00 0.945 11.000 62.81 29.66 1.168 L N
LEM110BB 03† 33.90 1.335 7.000 39.97 42.74 1.683 L N
LEM055BC 01† 6.00 0.236 0.55 0.022 9.50 2.14 1.09 0.25 13.90 0.547 0.580 3.31 28.00 1.102 J L
LEM055BC 02† 17.20 0.677 0.360 2.06 39.70 1.563 J L
LEM055BC 03† 22.10 0.870 0.230 1.31 57.20 2.252 J L
LEM055BC 04† 30.40 1.197 0.150 0.86 86.60 3.409 K M
LEM055BC 05† 41.40 1.630 0.110 0.63 125.70 4.949 L N
LEM120BC 01† 1.20 0.047 85.30 19.18 12.63 2.84 19.00 0.748 19.100 109.06 22.80 0.898 K M
LEM120BC 02† 26.20 1.031 12.000 68.52 32.28 1.271 L N
LEM120BC 03† 37.00 1.457 7.630 43.57 46.50 1.831 M P
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
152 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LEM055C 01 6.30 0.248 0.55 0.022 8.80 1.98 0.85 0.19 15.50 0.610 0.602 3.44 28.70 1.130 J L
LEM055C 02 19.00 0.748 0.340 1.94 42.37 1.668 J L
LEM055C 03 22.00 0.866 0.247 1.41 54.25 2.136 J L
LEM055C 04 25.00 0.984 0.194 1.11 65.89 2.594 K M
LEM055C 05 30.00 1.181 0.144 0.82 85.37 3.361 K M
LEM055C 06 35.00 1.378 0.114 0.65 104.85 4.128 K M
LEM055C 07 40.00 1.575 0.095 0.54 124.08 4.885 L N
LEM055C 08 45.00 1.772 0.081 0.46 143.81 5.662 L N
LEM055C 09 50.00 1.969 0.070 0.40 163.55 6.439 M P
LEM055C 10 55.00 2.165 0.061 0.35 184.79 7.275 M P
LEM055C 11 60.00 2.362 0.056 0.32 201.98 7.952 N Q
LEM055C 12 65.00 2.559 0.051 0.29 221.72 8.729 N Q
LEM075C 01 0.75 0.030 19.60 4.41 2.45 0.55 15.50 0.610 2.786 15.91 21.59 0.850 J L
LEM075C 02 19.00 0.748 1.658 9.47 29.41 1.158 J L
LEM075C 03 22.00 0.866 1.231 7.03 35.97 1.416 J L
LEM075C 04 25.00 0.984 0.979 5.59 42.52 1.674 K M
LEM075C 05 30.00 1.181 0.730 4.17 53.62 2.111 K M
LEM075C 06 35.00 1.378 0.581 3.32 64.47 2.538 K M
LEM075C 07 40.00 1.575 0.483 2.76 75.57 2.975 L N
LEM075C 08 45.00 1.772 0.415 2.37 86.41 3.402 L N
LEM075C 09 50.00 1.969 0.363 2.07 97.26 3.829 M P
LEM075C 10 55.00 2.165 0.322 1.84 108.33 4.265 M P
LEM075C 11 60.00 2.362 0.289 1.65 119.43 4.702 N Q
LEM075C 12 65.00 2.559 0.263 1.50 130.28 5.129 N Q
LEM080C 01 0.80 0.031 24.50 5.51 3.25 0.73 15.50 0.610 3.842 21.94 21.08 0.830 J L
LEM080C 02 19.00 0.748 2.313 13.21 28.14 1.108 J L
LEM080C 03 22.00 0.866 1.725 9.85 34.44 1.356 J L
LEM080C 04 25.00 0.984 1.377 7.86 40.49 1.594 K M
LEM080C 05 30.00 1.181 1.028 5.87 50.57 1.991 K M
LEM080C 06 35.00 1.378 0.821 4.69 60.91 2.398 K M
LEM080C 07 40.00 1.575 0.683 3.90 71.25 2.805 L N
LEM080C 08 45.00 1.772 0.585 3.34 81.33 3.202 L N
LEM080C 09 50.00 1.969 0.511 2.92 91.67 3.609 M P
LEM080C 10 55.00 2.165 0.455 2.60 101.73 4.005 M P
LEM080C 11 60.00 2.362 0.408 2.33 112.06 4.412 N Q
LEM080C 12 65.00 2.559 0.371 2.12 122.15 4.809 N Q
LEM080C 13 70.00 2.756 0.340 1.94 132.49 5.216 N Q
LEM080C 14 75.00 2.953 0.313 1.79 142.82 5.623 N Q
LEM090C 01† 0.90 0.035 37.10 8.34 5.58 1.25 17.10 0.673 4.230 24.15 24.53 0.966 J L
LEM090C 02† 22.50 0.886 2.650 15.13 34.40 1.354 J L
LEM090C 03† 30.60 1.205 1.700 9.71 49.20 1.937 K M
LEM090C 04† 44.10 1.736 1.060 6.05 73.80 2.906 L N
LE 018C 01 6.35 0.250 0.46 0.018 4.89 1.10 0.44 0.10 15.88 0.625 0.222 1.27 35.94 1.415 J L
LE 018C 02 19.05 0.750 0.130 0.74 53.34 2.100 J L
LE 018C 03 22.23 0.875 0.093 0.53 70.23 2.765 J L
LE 018C 04 25.40 1.000 0.072 0.41 87.38 3.440 K M
LE 018C 05 28.58 1.125 0.060 0.34 103.51 4.075 K M
LE 018C 06 31.75 1.250 0.049 0.28 122.68 4.830 K M
LE 018C 07 34.93 1.375 0.044 0.25 136.78 5.385 K M
LE 018C 08 38.10 1.500 0.037 0.21 159.26 6.270 L N
LE 018C 09 44.45 1.750 0.030 0.17 194.06 7.640 L N
LE 018C 10 50.80 2.000 0.025 0.14 232.66 9.160 L N
LE 018C 11 57.15 2.250 0.023 0.13 252.98 9.960 M P
LE 018C 12 63.50 2.500 0.019 0.11 294.89 11.610 M P
LE 018C 13 69.85 2.750 0.018 0.10 324.36 12.770 M P
LE 022C 01 0.56 0.022 9.34 2.10 0.89 0.20 15.88 0.625 0.578 3.30 30.61 1.205 J L
LE 022C 02 19.05 0.750 0.350 2.00 43.18 1.700 J L
LE 022C 03 22.23 0.875 0.263 1.50 54.48 2.145 J L
LE 022C 04 25.40 1.000 0.200 1.14 67.82 2.670 K M
LE 022C 05 28.58 1.125 0.165 0.94 79.88 3.145 K M
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 153
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 022C 06 6.35 0.250 0.56 0.022 9.34 2.10 0.89 0.20 31.75 1.250 0.140 0.80 92.20 3.630 K M
LE 022C 07 34.93 1.375 0.123 0.70 103.76 4.085 K M
LE 022C 08 38.10 1.500 0.105 0.60 118.62 4.670 L N
LE 022C 09 44.45 1.750 0.088 0.50 140.97 5.550 L N
LE 022C 10 50.80 2.000 0.070 0.40 171.45 6.750 L N
LE 022C 11 57.15 2.250 0.063 0.36 191.26 7.530 M P
LE 022C 12 63.50 2.500 0.056 0.32 214.38 8.440 M P
LE 022C 13 69.85 2.750 0.049 0.28 242.32 9.540 M P
LE 026C 002 0.66 0.026 13.79 3.10 1.78 0.40 12.70 0.500 3.555 20.30 16.00 0.630 J L
LE 026C 001 15.88 0.625 1.331 7.60 25.02 0.985 J L
LE 026C 00 19.05 0.750 0.841 4.80 33.27 1.310 J L
LE 026C 0 22.23 0.875 0.613 3.50 41.78 1.645 K M
LE 026C 01 25.40 1.000 0.490 2.80 49.78 1.960 K M
LE 026C 02 28.58 1.125 0.403 2.30 58.29 2.295 K M
LE 026C 03 31.75 1.250 0.333 1.90 67.82 2.670 K M
LE 026C 04 34.93 1.375 0.298 1.70 75.31 2.965 K M
LE 026C 05 38.10 1.500 0.263 1.50 83.82 3.300 L N
LE 026C 06 44.45 1.750 0.210 1.20 101.60 4.000 L N
LE 026C 07 50.80 2.000 0.175 1.00 119.38 4.700 L N
LE 026C 08 57.15 2.250 0.151 0.86 136.91 5.390 M P
LE 026C 09 63.50 2.500 0.133 0.76 153.67 6.050 M P
LE 026C 10 69.85 2.750 0.119 0.68 170.69 6.720 M P
LE 026C 11 76.20 3.000 0.105 0.60 190.50 7.500 N Q
LE 029C 001 0.74 0.029 19.13 4.30 2.45 0.55 15.88 0.625 2.294 13.10 23.24 0.915 J L
LE 029C 00 19.05 0.750 1.384 7.90 30.99 1.220 J L
LE 029C 0 22.23 0.875 1.051 6.00 38.23 1.505 K M
LE 029C 01 25.40 1.000 0.823 4.70 45.72 1.800 K M
LE 029C 02 28.58 1.125 0.683 3.90 52.96 2.085 K M
LE 029C 03 31.75 1.250 0.595 3.40 59.69 2.350 K M
LE 029C 04 34.93 1.375 0.508 2.90 67.69 2.665 K M
LE 029C 05 38.10 1.500 0.447 2.55 75.44 2.970 L N
LE 029C 06 44.45 1.750 0.368 2.10 89.92 3.540 L N
LE 029C 07 50.80 2.000 0.315 1.80 103.63 4.080 L N
LE 029C 08 57.15 2.250 0.280 1.60 116.59 4.590 M P
LE 029C 09 63.50 2.500 0.240 1.37 133.10 5.240 M P
LE 029C 10 69.85 2.750 0.214 1.22 147.83 5.820 M P
LE 029C 11 76.20 3.000 0.193 1.10 162.81 6.410 N Q
LE 031C 001 0.79 0.031 23.13 5.20 3.11 0.70 15.88 0.625 3.300 18.84 21.97 0.865 J L
LE 031C 00 19.05 0.750 2.102 12.00 28.70 1.130 J L
LE 031C 0 22.23 0.875 1.541 8.80 35.18 1.385 K M
LE 031C 01 25.40 1.000 1.208 6.90 41.91 1.650 K M
LE 031C 02 28.58 1.125 0.998 5.70 48.64 1.915 K M
LE 031C 03 31.75 1.250 0.858 4.90 55.12 2.170 K M
LE 031C 04 34.93 1.375 0.753 4.30 61.60 2.425 K M
LE 031C 05 38.10 1.500 0.666 3.80 68.07 2.680 L N
LE 031C 06 44.45 1.750 0.525 3.00 82.55 3.250 L N
LE 031C 07 50.80 2.000 0.455 2.60 94.74 3.730 L N
LE 031C 08 57.15 2.250 0.385 2.20 109.22 4.300 M P
LE 031C 09 63.50 2.500 0.350 2.00 120.65 4.750 M P
LE 031C 10 69.85 2.750 0.306 1.75 135.13 5.320 M P
LE 031C 11 76.20 3.000 0.275 1.57 149.10 5.870 N Q
LE 034C 001 0.86 0.034 30.25 6.80 3.78 0.85 15.88 0.625 4.974 28.40 21.21 0.835 J L
LE 034C 00 19.05 0.750 3.117 17.80 27.43 1.080 J L
LE 034C 0 22.23 0.875 2.364 13.50 33.40 1.315 K M
LE 034C 01 25.40 1.000 1.891 10.80 39.37 1.550 K M
LE 034C 02 28.58 1.125 1.594 9.10 45.09 1.775 K M
LE 034C 03 31.75 1.250 1.384 7.90 50.80 2.000 K M
LE 034C 04 34.93 1.375 1.173 6.70 57.53 2.265 K M
LE 034C 05 38.10 1.500 1.068 6.10 62.99 2.480 L N
LE 034C 06 44.45 1.750 0.858 4.90 75.18 2.960 L N
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
154 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 034C 07 6.35 0.250 0.86 0.034 30.25 6.80 3.78 0.85 50.80 2.000 0.736 4.20 86.87 3.420 L N
LE 034C 08 57.15 2.250 0.630 3.60 99.06 3.900 M P
LE 034C 09 63.50 2.500 0.560 3.20 110.74 4.360 M P
LE 034C 10 69.85 2.750 0.499 2.85 122.94 4.840 M P
LE 034C 11 76.20 3.000 0.455 2.60 134.37 5.290 N Q
LE 037C 00 0.94 0.037 37.81 8.50 4.45 1.00 15.88 0.625 7.828 44.70 20.19 0.795 J L
LE 037C 0 19.05 0.750 5.096 29.10 25.65 1.010 J L
LE 037C 01 25.40 1.000 3.100 17.70 36.07 1.420 K M
LE 037C 02 28.58 1.125 2.627 15.00 41.28 1.625 K M
LE 037C 03 31.75 1.250 2.224 12.70 46.74 1.840 K M
LE 037C 04 34.93 1.375 1.926 11.00 52.20 2.055 K M
LE 037C 05 38.10 1.500 1.699 9.70 57.66 2.270 L N
LE 037C 06 44.45 1.750 1.401 8.00 68.33 2.690 L N
LE 037C 07 50.80 2.000 1.173 6.70 79.25 3.120 L N
LE 037C 08 57.15 2.250 1.016 5.80 89.92 3.540 M P
LE 037C 09 63.50 2.500 0.893 5.10 100.84 3.970 M P
LE 037C 10 69.85 2.750 0.806 4.60 111.25 4.380 M P
LE 037C 11 76.20 3.000 0.718 4.10 122.68 4.830 N Q
LE 037C 12 82.55 3.250 0.657 3.75 133.35 5.250 N Q
LE 037C 13 88.90 3.500 0.599 3.42 144.53 5.690 N Q
LE 041C 01 1.04 0.041 52.04 11.70 4.67 1.05 19.05 0.750 9.037 51.60 24.38 0.960 J L
LE 041C 02 25.40 1.000 5.254 30.00 34.54 1.360 K M
LE 041C 03 28.58 1.125 4.378 25.00 39.50 1.555 K M
LE 041C 04 31.75 1.250 3.765 21.50 44.45 1.750 K M
LE 041C 05 34.93 1.375 3.328 19.00 49.15 1.935 K M
LE 041C 06 38.10 1.500 2.942 16.80 54.10 2.130 L N
LE 041C 07 44.45 1.750 2.417 13.80 64.01 2.520 L N
LE 041C 08 50.80 2.000 2.049 11.70 73.91 2.910 L N
LE 041C 09 57.15 2.250 1.769 10.10 83.82 3.300 M P
LE 041C 10 63.50 2.500 1.559 8.90 93.98 3.700 M P
LE 041C 11 69.85 2.750 1.401 8.00 103.63 4.080 M P
LE 041C 12 76.20 3.000 1.270 7.25 113.54 4.470 N Q
LE 041C 13 88.90 3.500 1.068 6.10 133.35 5.250 N Q
LEM063CA 01† 7.00 0.276 0.63 0.025 12.20 2.74 1.67 0.38 16.10 0.634 0.620 3.54 32.70 1.287 J L
LEM063CA 02† 19.90 0.783 0.390 2.23 46.50 1.831 J L
LEM063CA 03† 25.60 1.008 0.250 1.43 67.20 2.646 K M
LEM063CA 04† 35.00 1.378 0.160 0.91 101.50 3.996 K M
LEM063CA 05† 47.60 1.874 0.110 0.63 147.30 5.799 L N
LEM100CA 01† 1.00 0.039 45.30 10.18 5.70 1.28 19.00 0.748 4.710 26.89 27.17 1.070 J L
LEM100CA 02† 25.00 0.984 2.940 16.79 38.10 1.500 K M
LEM100CA 03† 34.00 1.339 1.830 10.45 54.40 2.142 K M
LEM100CA 04† 49.00 1.929 1.180 6.74 81.70 3.217 L N
LEM100CA 05† 290.00 11.417 0.180 1.03 510.00 20.079 BC BD
LEM140CA 01† 1.40 0.055 114.00 25.63 16.88 3.80 22.10 0.870 22.300 127.34 26.46 1.042 L N
LEM140CA 02† 30.50 1.201 13.900 79.37 37.48 1.476 M P
LEM140CA 03† 43.10 1.697 8.910 50.88 54.00 2.126 N Q
LEM070CB 01† 7.50 0.295 0.70 0.028 15.40 3.46 2.18 0.49 17.50 0.689 0.780 4.45 34.40 1.354 K M
LEM070CB 02† 21.70 0.854 0.490 2.80 48.70 1.917 K M
LEM070CB 03† 28.00 1.102 0.310 1.77 70.20 2.764 K M
LEM070CB 04† 38.50 1.516 0.200 1.14 106.00 4.173 L N
LEM070CB 05† 52.50 2.067 0.130 0.74 153.50 6.043 M P
LEM110CB 01† 1.10 0.043 55.50 12.48 8.25 1.86 20.60 0.811 5.690 32.49 28.90 1.138 K M
LEM110CB 02† 27.20 1.071 3.550 20.27 40.50 1.594 K M
LEM110CB 03† 37.10 1.461 2.280 13.02 57.90 2.280 L N
LEM110CB 04† 53.60 2.110 1.420 8.11 86.80 3.417 M P
LE 030CD 01 7.95 0.313 0.76 0.030 17.79 4.00 1.78 0.40 25.40 1.000 0.613 3.50 51.56 2.030 K M
LE 030CD 02 28.58 1.125 0.473 2.70 62.36 2.455 K M
LE 030CD 03 31.75 1.250 0.403 2.30 71.63 2.820 K M
LE 030CD 04 34.93 1.375 0.333 1.90 82.93 3.265 K M
LE 030CD 05 38.10 1.500 0.298 1.70 91.95 3.620 L N
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 155
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 030CD 06 7.95 0.313 0.76 0.030 17.79 4.00 1.78 0.40 44.45 1.750 0.228 1.30 114.81 4.520 L N
LE 030CD 07 50.80 2.000 0.193 1.10 133.86 5.270 L N
LE 030CD 08 57.15 2.250 0.165 0.94 154.43 6.080 M P
LE 030CD 09 63.50 2.500 0.145 0.83 173.74 6.840 M P
LE 037CD 01 0.94 0.037 31.14 7.00 3.69 0.83 25.40 1.000 1.576 9.00 42.93 1.690 K M
LE 037CD 02 28.58 1.125 1.226 7.00 50.93 2.005 K M
LE 037CD 03 31.75 1.250 1.051 6.00 57.91 2.280 K M
LE 037CD 04 34.93 1.375 0.911 5.20 65.15 2.565 K M
LE 037CD 05 38.10 1.500 0.806 4.60 72.14 2.840 L N
LE 037CD 06 44.45 1.750 0.630 3.60 87.88 3.460 L N
LE 037CD 07 50.80 2.000 0.543 3.10 101.35 3.990 L N
LE 037CD 08 57.15 2.250 0.455 2.60 117.35 4.620 M P
LE 037CD 09 63.50 2.500 0.420 2.40 128.78 5.070 M P
LE 037CD 10 69.85 2.750 0.368 2.10 144.53 5.690 M P
LE 037CD 11 76.20 3.000 0.333 1.90 158.75 6.250 N Q
LE 043CD 01 1.09 0.043 45.81 10.30 5.78 1.30 25.40 1.000 3.928 22.43 35.56 1.400 K M
LE 043CD 02 28.58 1.125 3.149 17.98 41.28 1.625 K M
LE 043CD 03 31.75 1.250 2.627 15.00 46.99 1.850 K M
LE 043CD 04 34.93 1.375 2.254 12.87 52.71 2.075 K M
LE 043CD 05 38.10 1.500 1.974 11.27 58.42 2.300 L N
LE 043CD 06 44.45 1.750 1.581 9.03 69.85 2.750 L N
LE 043CD 07 50.80 2.000 1.319 7.53 81.28 3.200 L N
LE 043CD 08 57.15 2.250 1.131 6.46 92.46 3.640 M P
LE 043CD 09 63.50 2.500 0.990 5.65 103.89 4.090 M P
LE 043CD 10 69.85 2.750 0.879 5.02 115.32 4.540 M P
LE 043CD 11 76.20 3.000 0.792 4.52 126.75 4.990 N Q
LE 049CD 01 1.24 0.049 66.72 15.00 8.01 1.80 25.40 1.000 6.305 36.00 34.80 1.370 K M
LE 049CD 02 28.58 1.125 5.254 30.00 39.75 1.565 K M
LE 049CD 03 31.75 1.250 4.553 26.00 44.70 1.760 K M
LE 049CD 04 34.93 1.375 4.028 23.00 49.40 1.945 K M
LE 049CD 05 38.10 1.500 3.678 21.00 54.10 2.130 L N
LE 049CD 06 44.45 1.750 2.890 16.50 64.77 2.550 L N
LE 049CD 07 50.80 2.000 2.452 14.00 74.68 2.940 L N
LE 049CD 08 57.15 2.250 2.102 12.00 85.09 3.350 M P
LE 049CD 09 63.50 2.500 1.926 11.00 93.98 3.700 M P
LE 049CD 10 69.85 2.750 1.751 10.00 103.38 4.070 M P
LE 049CD 11 76.20 3.000 1.576 9.00 113.54 4.470 N Q
LE 055CD 01 1.40 0.055 93.41 21.00 13.34 3.00 25.40 1.000 14.398 82.21 30.99 1.220 L N
LE 055CD 02 28.58 1.125 11.695 66.78 35.43 1.395 L N
LE 055CD 03 31.75 1.250 9.846 56.22 39.88 1.570 M P
LE 055CD 04 34.93 1.375 8.503 48.55 44.32 1.745 M P
LE 055CD 05 38.10 1.500 7.482 42.72 48.77 1.920 N Q
LE 055CD 06 44.45 1.750 6.033 34.45 57.66 2.270 N Q
LE 055CD 07 50.80 2.000 5.053 28.85 66.55 2.620 N Q
LE 055CD 08 57.15 2.250 4.349 24.83 75.44 2.970 P R
LE 055CD 09 63.50 2.500 3.816 21.79 84.58 3.330 P R
LE 055CD 10 69.85 2.750 3.399 19.41 93.47 3.680 P R
LE 055CD 11 76.20 3.000 3.065 17.50 102.36 4.030 Q S
LEM075CD 01 8.00 0.315 0.75 0.030 16.70 3.75 1.65 0.37 25.00 0.984 0.573 3.27 51.16 2.014 K M
LEM075CD 02 30.00 1.181 0.396 2.26 68.10 2.681 K M
LEM075CD 03 35.00 1.378 0.303 1.73 84.53 3.328 K M
LEM075CD 04 40.00 1.575 0.245 1.40 101.22 3.985 L N
LEM075CD 05 45.00 1.772 0.207 1.18 117.65 4.632 L N
LEM075CD 06 50.00 1.969 0.177 1.01 135.10 5.319 L N
LEM075CD 07 55.00 2.165 0.156 0.89 151.51 5.965 M P
LEM075CD 08 60.00 2.362 0.138 0.79 168.71 6.642 M P
LEM075CD 09 65.00 2.559 0.126 0.72 184.12 7.249 M P
LEM160CD 01† 1.60 0.063 146.00 32.82 21.81 4.90 25.30 0.996 25.400 145.04 30.18 1.188 L N
LEM160CD 02† 34.90 1.374 15.900 90.79 42.71 1.681 L N
LEM160CD 03† 49.30 1.941 10.200 58.24 61.50 2.421 M P
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
156 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LEM120CE 01† 8.50 0.335 1.20 0.047 62.80 14.12 9.22 2.07 23.00 0.906 5.430 31.01 32.85 1.293 L N
LEM120CE 02† 30.20 1.189 3.390 19.36 46.00 1.811 L N
LEM120CE 03† 41.00 1.614 2.170 12.39 65.60 2.583 M P
LEM120CE 04† 59.00 2.323 1.350 7.71 98.60 3.882 M P
LEM120CE 05† 290.00 11.417 0.240 1.37 515.00 20.276 BD BE
LEM080CF 01† 9.00 0.354 0.80 0.031 19.00 4.27 2.73 0.61 20.60 0.811 0.760 4.34 42.00 1.654 J L
LEM080CF 02† 25.40 1.000 0.470 2.68 59.70 2.350 K M
LEM080CF 03† 32.60 1.283 0.300 1.71 86.10 3.390 K M
LEM080CF 04† 44.60 1.756 0.190 1.08 130.20 5.126 L N
LEM080CF 05† 60.60 2.386 0.130 0.74 188.60 7.425 M P
LEM180CF 01† 1.80 0.071 180.00 40.47 26.47 5.95 28.40 1.118 28.600 163.31 33.77 1.330 N R
LEM180CF 02† 39.20 1.543 17.800 101.64 47.79 1.881 Q T
LEM180CF 03† 55.40 2.181 11.500 65.67 68.80 2.709 R U
LEM095D 01 9.50 0.374 0.95 0.037 26.00 5.84 3.15 0.71 19.00 0.748 4.492 25.65 24.08 0.948 J L
LEM095D 02 22.00 0.866 2.187 12.49 32.41 1.276 J L
LEM095D 03 25.00 0.984 1.447 8.26 40.74 1.604 K M
LEM095D 04 30.00 1.181 0.925 5.28 54.64 2.151 K M
LEM095D 05 35.00 1.378 0.680 3.88 68.53 2.698 K M
LEM095D 06 40.00 1.575 0.536 3.06 82.68 3.255 L N
LEM095D 07 45.00 1.772 0.443 2.53 96.57 3.802 L N
LEM095D 08 50.00 1.969 0.378 2.16 110.46 4.349 L N
LEM095D 09 55.00 2.165 0.329 1.88 124.33 4.895 M P
LEM095D 10 60.00 2.362 0.292 1.67 137.97 5.432 M P
LEM095D 11 65.00 2.559 0.263 1.50 151.87 5.979 M P
LEM095D 12 70.00 2.756 0.238 1.36 165.76 6.526 N Q
LEM120D 01 1.20 0.047 54.00 12.14 6.85 1.54 25.00 0.984 4.686 26.76 35.15 1.384 L N
LEM120D 02 30.00 1.181 3.082 17.60 45.24 1.781 M P
LEM120D 03 35.00 1.378 2.296 13.11 55.58 2.188 M P
LEM120D 04 40.00 1.575 1.828 10.44 65.91 2.595 N Q
LEM120D 05 45.00 1.772 1.520 8.68 76.00 2.992 N Q
LEM120D 06 50.00 1.969 1.301 7.43 86.33 3.399 P R
LEM120D 07 55.00 2.165 1.137 6.49 96.39 3.795 P R
LEM120D 08 60.00 2.362 1.009 5.76 106.73 4.202 P R
LEM120D 09 70.00 2.756 0.825 4.71 127.15 5.006 Q S
LEM120D 10 80.00 3.150 0.697 3.98 147.57 5.810 Q S
LEM120D 11 90.00 3.543 0.602 3.44 168.22 6.623 Q S
LEM120D 12 100.00 3.937 0.532 3.04 188.65 7.427 R T
LEM120D 13 115.00 4.528 0.452 2.58 219.41 8.638 R T
LEM150D 01 1.50 0.059 98.00 22.05 14.70 3.30 30.00 1.181 9.893 56.49 38.38 1.511 P R
LEM150D 03 35.00 1.378 7.480 42.71 46.18 1.818 Q S
LEM150D 04 40.00 1.575 6.014 34.34 53.98 2.125 Q S
LEM150D 05 45.00 1.772 5.028 28.71 61.52 2.422 Q S
LEM150D 06 50.00 1.969 4.320 24.67 69.32 2.729 R T
LEM150D 07 55.00 2.165 3.786 21.62 77.09 3.035 R T
LEM150D 08 60.00 2.362 3.370 19.24 84.63 3.332 R T
LEM150D 09 70.00 2.756 2.764 15.78 100.23 3.946 R T
LEM150D 10 80.00 3.150 2.341 13.37 115.57 4.550 S U
LE 026D 01 9.53 0.375 0.66 0.026 10.23 2.30 0.98 0.22 25.40 1.000 0.228 1.30 66.04 2.600 J L
LE 026D 02 28.58 1.125 0.161 0.92 85.98 3.385 K M
LE 026D 03 31.75 1.250 0.126 0.72 105.16 4.140 K M
LE 026D 04 34.93 1.375 0.105 0.60 123.06 4.845 K M
LE 026D 05 38.10 1.500 0.088 0.50 143.76 5.660 L N
LE 026D 06 44.45 1.750 0.068 0.39 179.83 7.080 L N
LE 031D 0 0.79 0.031 15.12 3.40 1.33 0.30 22.23 0.875 0.851 4.86 38.48 1.515 J L
LE 031D 01 25.40 1.000 0.543 3.10 50.80 2.000 J L
LE 031D 02 28.58 1.125 0.403 2.30 62.87 2.475 K M
LE 031D 03 31.75 1.250 0.315 1.80 75.44 2.970 K M
LE 031D 04 34.93 1.375 0.263 1.50 87.50 3.445 K M
LE 031D 05 38.10 1.500 0.228 1.30 98.55 3.880 L N
LE 031D 06 44.45 1.750 0.168 0.96 126.49 4.980 L N
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 157
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 031D 07 9.53 0.375 0.79 0.031 15.12 3.40 1.33 0.30 50.80 2.000 0.137 0.78 151.64 5.970 L N
LE 031D 08 57.15 2.250 0.116 0.66 176.53 6.950 M P
LE 031D 09 63.50 2.500 0.100 0.57 201.68 7.940 M P
LE 031D 10 69.85 2.750 0.088 0.50 227.33 8.950 M P
LE 031D 11 76.20 3.000 0.079 0.45 251.21 9.890 N Q
LE 034D 01 0.86 0.034 20.46 4.60 2.22 0.50 25.40 1.000 0.841 4.80 46.99 1.850 J L
LE 034D 02 28.58 1.125 0.630 3.60 57.53 2.265 K M
LE 034D 03 31.75 1.250 0.490 2.80 68.83 2.710 K M
LE 034D 04 34.93 1.375 0.420 2.40 78.36 3.085 K M
LE 034D 05 38.10 1.500 0.350 2.00 90.17 3.550 L N
LE 034D 06 44.45 1.750 0.280 1.60 109.47 4.310 L N
LE 034D 07 50.80 2.000 0.228 1.30 130.81 5.150 M P
LE 037D 0 0.94 0.037 25.80 5.80 3.11 0.70 19.05 0.750 4.256 24.30 24.38 0.960 J L
LE 037D 01 25.40 1.000 1.349 7.70 42.16 1.660 J L
LE 037D 02 28.58 1.125 0.981 5.60 51.69 2.035 K M
LE 037D 03 31.75 1.250 0.771 4.40 61.21 2.410 K M
LE 037D 04 34.93 1.375 0.648 3.70 69.98 2.755 K M
LE 037D 05 38.10 1.500 0.560 3.20 78.49 3.090 L N
LE 037D 06 44.45 1.750 0.420 2.40 98.55 3.880 L N
LE 037D 07 50.80 2.000 0.350 2.00 115.57 4.550 M P
LE 037D 08 57.15 2.250 0.298 1.70 133.35 5.250 M P
LE 037D 09 63.50 2.500 0.245 1.40 155.96 6.140 M P
LE 037D 10 69.85 2.750 0.221 1.26 172.72 6.800 M P
LE 037D 11 76.20 3.000 0.200 1.14 189.74 7.470 N Q
LE 039D 01 0.99 0.039 30.25 6.80 3.56 0.80 25.40 1.000 1.681 9.60 41.40 1.630 J L
LE 039D 02 28.58 1.125 1.226 7.00 50.42 1.985 K M
LE 039D 03 31.75 1.250 0.998 5.70 58.42 2.300 K M
LE 039D 04 34.93 1.375 0.841 4.80 66.68 2.625 K M
LE 039D 05 38.10 1.500 0.718 4.10 75.18 2.960 L N
LE 039D 06 44.45 1.750 0.560 3.20 92.20 3.630 L N
LE 039D 07 50.80 2.000 0.455 2.60 109.47 4.310 M P
LE 039D 08 57.15 2.250 0.385 2.20 126.49 4.980 M P
LE 039D 09 63.50 2.500 0.333 1.90 143.76 5.660 M P
LE 039D 10 69.85 2.750 0.296 1.69 160.02 6.300 M P
LE 039D 11 76.20 3.000 0.264 1.51 177.04 6.970 N Q
LE 041D 0 1.04 0.041 34.69 7.80 4.00 0.90 19.05 0.750 6.655 38.00 23.62 0.930 L P
LE 041D 01 25.40 1.000 2.224 12.70 39.12 1.540 L P
LE 041D 02 28.58 1.125 1.664 9.50 47.12 1.855 M Q
LE 041D 03 31.75 1.250 1.331 7.60 54.86 2.160 M Q
LE 041D 04 34.93 1.375 1.121 6.40 62.36 2.455 M Q
LE 041D 05 38.10 1.500 0.963 5.50 69.85 2.750 N R
LE 041D 06 44.45 1.750 0.736 4.20 86.11 3.390 N R
LE 041D 07 50.80 2.000 0.595 3.40 102.36 4.030 N R
LE 041D 08 57.15 2.250 0.508 2.90 117.60 4.630 P S
LE 041D 09 63.50 2.500 0.438 2.50 133.60 5.260 P S
LE 041D 10 69.85 2.750 0.384 2.19 149.86 5.900 P S
LE 041D 11 76.20 3.000 0.343 1.96 165.61 6.520 Q T
LE 041D 12 88.90 3.500 0.285 1.63 196.34 7.730 Q T
LE 041D 13 101.60 4.000 0.242 1.38 228.52 8.997 R U
LE 041D 14 114.30 4.500 0.210 1.20 260.35 10.250 R U
LE 041D 15 127.00 5.000 0.187 1.07 290.83 11.450 R U
LE 045D 0 1.14 0.045 44.48 10.00 5.34 1.20 19.05 0.750 9.983 57.00 22.86 0.900 L P
LE 045D 01 25.40 1.000 3.538 20.20 36.58 1.440 L P
LE 045D 02 28.58 1.125 2.732 15.60 42.80 1.685 M Q
LE 045D 03 31.75 1.250 2.137 12.20 50.04 1.970 M Q
LE 045D 04 34.93 1.375 1.769 10.10 57.02 2.245 M Q
LE 045D 05 38.10 1.500 1.541 8.80 63.50 2.500 N R
LE 045D 06 44.45 1.750 1.313 7.50 74.17 2.920 N R
LE 045D 07 50.80 2.000 0.981 5.60 90.68 3.570 N R
LE 045D 08 57.15 2.250 0.841 4.80 103.63 4.080 P S
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
158 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 045D 09 9.53 0.375 1.14 0.045 44.48 10.00 5.34 1.20 63.50 2.500 0.718 4.10 118.11 4.650 P S
LE 045D 10 69.85 2.750 0.630 3.60 131.83 5.190 P S
LE 045D 11 76.20 3.000 0.560 3.20 146.05 5.750 Q T
LE 045D 12 88.90 3.500 0.455 2.60 174.75 6.880 Q T
LE 045D 13 101.60 4.000 0.394 2.25 200.91 7.910 R U
LE 045D 14 114.30 4.500 0.347 1.98 227.08 8.940 R U
LE 045D 15 127.00 5.000 0.308 1.76 254.00 10.000 S V
LE 045D 16 139.70 5.500 0.277 1.58 281.18 11.070 S V
LE 045D 17 152.40 6.000 0.250 1.43 308.71 12.154 S V
LE 049D 01 1.24 0.049 57.82 13.00 6.67 1.50 25.40 1.000 5.254 30.00 35.05 1.380 L P
LE 049D 02 28.58 1.125 4.151 23.70 41.02 1.615 M Q
LE 049D 03 31.75 1.250 3.328 19.00 47.24 1.860 M Q
LE 049D 04 34.93 1.375 2.802 16.00 53.21 2.095 M Q
LE 049D 05 38.10 1.500 2.434 13.90 59.18 2.330 N R
LE 049D 06 44.45 1.750 1.891 10.80 71.37 2.810 N R
LE 049D 07 50.80 2.000 1.576 9.00 83.31 3.280 N R
LE 049D 08 57.15 2.250 1.313 7.50 96.01 3.780 P S
LE 049D 09 63.50 2.500 1.121 6.40 109.22 4.300 P S
LE 049D 10 69.85 2.750 1.016 5.80 120.14 4.730 P S
LE 049D 11 76.20 3.000 0.911 5.20 132.33 5.210 Q T
LE 049D 12 88.90 3.500 0.736 4.20 158.50 6.240 Q T
LE 049D 13 101.60 4.000 0.630 3.60 182.63 7.190 R U
LE 049D 14 114.30 4.500 0.560 3.20 205.49 8.090 R U
LE 049D 15 127.00 5.000 0.485 2.77 232.41 9.150 S V
LE 049D 16 139.70 5.500 0.438 2.50 256.54 10.100 T W
LE 049D 17 152.40 6.000 0.398 2.27 281.08 11.066 T W
LE 052D 01 1.32 0.052 68.94 15.50 7.78 1.75 25.40 1.000 7.128 40.70 34.04 1.340 N R
LE 052D 02 28.58 1.125 5.429 31.00 39.75 1.565 P S
LE 052D 03 31.75 1.250 4.378 25.00 45.72 1.800 P S
LE 052D 04 34.93 1.375 3.800 21.70 50.93 2.005 P S
LE 052D 05 38.10 1.500 3.257 18.60 56.90 2.240 Q T
LE 052D 06 44.45 1.750 2.539 14.50 68.58 2.700 Q T
LE 052D 07 50.80 2.000 2.294 13.10 77.47 3.050 R U
LE 052D 08 57.15 2.250 1.786 10.20 91.44 3.600 R U
LE 052D 09 63.50 2.500 1.541 8.80 103.12 4.060 R U
LE 052D 10 69.85 2.750 1.366 7.80 114.55 4.510 R U
LE 052D 11 76.20 3.000 1.226 7.00 125.98 4.960 S V
LE 055D 0 1.40 0.055 77.84 17.50 8.90 2.00 25.40 1.000 9.772 55.80 32.51 1.280 N R
LE 055D 01 31.75 1.250 6.095 34.80 43.18 1.700 P S
LE 055D 02 34.93 1.375 5.219 29.80 48.13 1.895 P S
LE 055D 03 38.10 1.500 4.448 25.40 53.59 2.110 Q T
LE 055D 04 44.45 1.750 3.485 19.90 64.26 2.530 Q T
LE 055D 05 50.80 2.000 2.872 16.40 74.93 2.950 Q T
LE 055D 06 57.15 2.250 2.434 13.90 85.60 3.370 R U
LE 055D 07 63.50 2.500 2.084 11.90 96.52 3.800 R U
LE 055D 08 69.85 2.750 1.856 10.60 106.93 4.210 R U
LE 055D 09 76.20 3.000 1.664 9.50 117.60 4.630 S V
LE 055D 10 88.90 3.500 1.384 7.90 138.68 5.460 S V
LE 055D 11 101.60 4.000 1.191 6.80 159.51 6.280 T W
LE 055D 12 114.30 4.500 1.033 5.90 181.10 7.130 T W
LE 055D 13 127.00 5.000 0.928 5.30 201.17 7.920 U X
LE 055D 14 139.70 5.500 0.820 4.68 223.77 8.810 U X
LE 055D 15 152.40 6.000 0.741 4.23 245.36 9.660 V Y
LE 058D 01 1.47 0.058 88.96 20.00 11.12 2.50 25.40 1.000 12.452 71.10 31.75 1.250 N R
LE 058D 02 28.58 1.125 9.825 56.10 36.45 1.435 P S
LE 058D 03 31.75 1.250 7.776 44.40 41.66 1.640 P S
LE 058D 04 34.93 1.375 6.673 38.10 46.61 1.835 P S
LE 058D 05 38.10 1.500 5.832 33.30 51.56 2.030 Q T
LE 058D 06 44.45 1.750 4.553 26.00 61.47 2.420 Q T
LE 058D 07 50.80 2.000 3.818 21.80 71.12 2.800 Q T
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 159
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 058D 08 9.53 0.375 1.47 0.058 88.96 20.00 11.12 2.50 57.15 2.250 3.222 18.40 81.28 3.200 R U
LE 058D 09 63.50 2.500 2.785 15.90 91.44 3.600 R U
LE 058D 10 69.85 2.750 2.487 14.20 101.09 3.980 R U
LE 058D 11 76.20 3.000 2.224 12.70 111.25 4.380 S V
LE 058D 12 88.90 3.500 1.851 10.57 130.96 5.156 S V
LE 058D 13 101.60 4.000 1.581 9.03 150.83 5.938 T W
LE 058D 14 114.30 4.500 1.380 7.88 170.71 6.721 T W
LE 058D 15 127.00 5.000 1.224 6.99 190.60 7.504 U X
LE 058D 16 139.70 5.500 1.100 6.28 210.49 8.287 U X
LE 058D 17 152.40 6.000 0.998 5.70 230.38 9.070 V Y
LEM090DB 01† 10.00 0.394 0.90 0.035 24.00 5.4 3.46 0.78 23.00 0.906 0.880 5.02 46.10 1.815 J L
LEM090DB 02† 28.40 1.118 0.550 3.14 65.30 2.571 K M
LEM090DB 03† 36.50 1.437 0.350 2.00 94.10 3.705 L N
LEM090DB 04† 50.00 1.969 0.230 1.31 142.20 5.598 M P
LEM090DB 05† 68.00 2.677 0.150 0.86 206.00 8.110 M P
LEM140DB 01† 1.40 0.055 83.60 18.79 12.66 2.85 26.90 1.059 6.140 35.06 38.50 1.516 N R
LEM140DB 02† 35.30 1.390 3.830 21.87 53.80 2.118 P S
LEM140DB 03† 47.90 1.886 2.460 14.05 76.80 3.024 Q T
LEM140DB 04† 68.90 2.713 1.540 8.79 115.10 4.531 R U
LEM140DB 05† 290.00 11.417 0.320 1.83 510.00 20.079 BD BE
LEM200DB 01† 2.00 0.079 220.00 49.46 32.94 7.41 31.60 1.244 31.800 181.58 37.46 1.475 Q T
LEM200DB 02† 43.60 1.717 19.900 113.63 52.98 2.086 Q T
LEM200DB 03† 61.60 2.425 12.800 73.09 76.30 3.004 R U
LE 037DD 01 10.67 0.420 0.94 0.037 21.48 4.83 2.22 0.50 25.40 1.000 1.541 8.80 37.90 1.492 L N
LE 037DD 02 28.58 1.125 0.963 5.50 48.56 1.912 L N
LE 037DD 03 31.75 1.250 0.683 3.90 59.94 2.360 L N
LE 037DD 04 34.93 1.375 0.543 3.10 70.41 2.772 M P
LE 037DD 05 38.10 1.500 0.438 2.50 82.09 3.232 M P
LE 037DD 06 44.45 1.750 0.333 1.90 102.31 4.028 M P
LE 037DD 07 50.80 2.000 0.263 1.50 124.10 4.886 N Q
LE 037DD 08 57.15 2.250 0.210 1.20 148.79 5.858 N Q
LE 037DD 09 63.50 2.500 0.175 1.00 173.38 6.826 N Q
LE 037DD 10 69.85 2.750 0.158 0.90 191.95 7.557 P R
LE 037DD 11 76.20 3.000 0.140 0.80 213.66 8.412 P R
LE 055DD 01 1.40 0.055 71.66 16.11 6.23 1.40 25.40 1.000 9.913 56.60 32.00 1.260 N R
LE 055DD 02 28.58 1.125 6.795 38.80 38.20 1.504 N R
LE 055DD 03 31.75 1.250 5.079 29.00 44.63 1.757 P S
LE 055DD 04 34.93 1.375 4.116 23.50 50.80 2.000 P S
LE 055DD 05 38.10 1.500 3.415 19.50 57.25 2.254 Q T
LE 055DD 06 44.45 1.750 2.574 14.70 69.88 2.751 Q T
LE 055DD 07 50.80 2.000 2.067 11.80 82.47 3.247 Q T
LE 055DD 08 57.15 2.250 1.716 9.80 95.28 3.751 R U
LE 055DD 09 63.50 2.500 1.471 8.40 107.98 4.251 R U
LE 055DD 10 69.85 2.750 1.296 7.40 120.35 4.738 R U
LE 055DD 11 76.20 3.000 1.156 6.60 132.82 5.229 S V
LEM100DE 01† 11.00 0.433 1.00 0.039 29.60 6.65 4.18 0.94 25.40 1.000 1.020 5.82 50.20 1.976 L N
LEM100DE 02† 31.40 1.236 0.640 3.65 71.00 2.795 M P
LEM100DE 03† 40.40 1.591 0.410 2.34 102.30 4.028 N Q
LEM100DE 04† 55.40 2.181 0.260 1.48 154.40 6.079 P R
LEM100DE 05† 75.40 2.969 0.170 0.97 224.40 8.835 Q S
LEM160DE 01† 1.60 0.063 111.00 24.95 16.91 3.80 30.10 1.185 8.040 45.91 41.80 1.646 P S
LEM160DE 02† 39.70 1.563 5.020 28.66 58.40 2.299 Q T
LEM160DE 03† 54.10 2.130 3.220 18.39 83.40 3.283 R U
LEM160DE 04† 78.10 3.075 2.010 11.48 124.90 4.917 S V
LE 037DE 01 11.13 0.438 0.94 0.037 24.46 5.50 2.45 0.55 25.40 1.000 0.666 3.80 58.42 2.300 L N
LE 037DE 02 28.58 1.125 0.525 3.00 70.49 2.775 M P
LE 037DE 03 31.75 1.250 0.420 2.40 84.07 3.310 M P
LE 037DE 04 34.93 1.375 0.350 2.00 97.92 3.855 M P
LE 037DE 05 38.10 1.500 0.306 1.75 109.98 4.330 N Q
LE 037DE 06 44.45 1.750 0.245 1.40 134.37 5.290 N Q
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
160 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 037DE 07 11.13 0.438 0.94 0.037 24.46 5.50 2.45 0.55 50.80 2.000 0.193 1.10 165.10 6.500 N Q
LE 037DE 08 57.15 2.250 0.170 0.97 186.69 7.350 P R
LE 037DE 09 63.50 2.500 0.149 0.85 211.33 8.320 P R
LE 037DE 10 69.85 2.750 0.131 0.75 237.49 9.350 P R
LE 037DE 11 76.20 3.000 0.116 0.66 266.70 10.500 Q S
LE 046DE 01 1.17 0.046 44.48 10.00 4.45 1.00 25.40 1.000 3.275 18.70 37.59 1.480 N R
LE 046DE 02 28.58 1.125 2.312 13.20 45.85 1.805 P S
LE 046DE 03 31.75 1.250 1.708 9.75 55.12 2.170 P S
LE 046DE 04 34.93 1.375 1.401 8.00 63.63 2.505 P S
LE 046DE 05 38.10 1.500 1.191 6.80 71.63 2.820 Q T
LE 046DE 06 44.45 1.750 0.893 5.10 89.15 3.510 Q T
LE 046DE 07 50.80 2.000 0.718 4.10 106.68 4.200 Q T
LE 046DE 08 57.15 2.250 0.595 3.40 124.46 4.900 R U
LE 046DE 09 63.50 2.500 0.508 2.90 142.24 5.600 R U
LE 046DE 10 69.85 2.750 0.447 2.55 159.51 6.280 R U
LE 046DE 11 76.20 3.000 0.394 2.25 177.80 7.000 S V
LE 055DE 01 1.40 0.055 66.72 15.00 6.67 1.50 25.40 1.000 5.079 29.00 37.34 1.470 N R
LE 055DE 02 28.58 1.125 3.940 22.50 43.82 1.725 P S
LE 055DE 03 31.75 1.250 3.328 19.00 49.78 1.960 P S
LE 055DE 04 34.93 1.375 2.802 16.00 56.26 2.215 P S
LE 055DE 05 38.10 1.500 2.452 14.00 62.48 2.460 Q T
LE 055DE 06 44.45 1.750 1.926 11.00 75.69 2.980 Q T
LE 055DE 07 50.80 2.000 1.629 9.30 87.63 3.450 Q T
LE 055DE 08 57.15 2.250 1.401 8.00 100.08 3.940 R U
LE 055DE 09 63.50 2.500 1.191 6.80 114.05 4.490 R U
LE 055DE 10 69.85 2.750 1.051 6.00 127.00 5.000 R U
LE 055DE 11 76.20 3.000 0.946 5.40 139.70 5.500 S V
LEM110DF 01† 12.00 0.472 1.10 0.043 35.80 8.05 5.26 1.18 27.80 1.094 1.150 6.57 54.20 2.134 M Q
LEM110DF 02† 34.40 1.354 0.720 4.11 76.70 3.020 M Q
LEM110DF 03† 44.30 1.744 0.460 2.63 110.40 4.346 N R
LEM110DF 04† 60.80 2.394 0.280 1.60 166.80 6.567 P S
LEM110DF 05† 82.80 3.260 0.200 1.14 241.80 9.520 Q T
LEM180DF 01† 1.80 0.071 141.00 31.70 21.43 4.82 33.20 1.307 10.100 57.67 45.10 1.776 P S
LEM180DF 02† 44.00 1.732 6.280 35.86 63.00 2.480 Q T
LEM180DF 03† 60.20 2.370 4.020 22.95 89.90 3.539 R U
LEM180DF 04† 87.20 3.433 2.520 14.39 134.80 5.307 S V
LEM180DF 05† 290.00 11.417 0.680 3.88 465.00 18.307 BE BF
LEM120E 01 12.50 0.492 1.20 0.047 39.20 8.82 3.90 0.88 30.00 1.181 2.074 11.84 47.02 1.851 M Q
LEM120E 02 40.00 1.575 0.958 5.47 76.84 3.025 N R
LEM120E 03 50.00 1.969 0.623 3.56 106.65 4.199 N R
LEM120E 04 55.00 2.165 0.531 3.03 121.54 4.785 P S
LEM120E 05 60.00 2.362 0.462 2.64 136.45 5.372 P S
LEM120E 06 65.00 2.559 0.410 2.34 151.10 5.949 P S
LEM120E 07 70.00 2.756 0.366 2.09 166.52 6.556 Q T
LEM120E 08 80.00 3.150 0.305 1.74 195.83 7.710 Q T
LEM120E 09 90.00 3.543 0.259 1.48 226.14 8.903 Q T
LEM120E 10 100.00 3.937 0.228 1.30 255.19 10.047 R U
LEM160E 01 1.60 0.063 88.25 19.84 11.80 2.65 30.00 1.181 8.543 48.78 38.89 1.531 P S
LEM160E 02 35.00 1.378 5.657 32.30 48.46 1.908 P S
LEM160E 03 40.00 1.575 4.228 24.14 58.04 2.285 Q T
LEM160E 04 45.00 1.772 3.377 19.28 67.61 2.662 Q T
LEM160E 05 50.00 1.969 2.809 16.04 77.19 3.039 Q T
LEM160E 06 55.00 2.165 2.406 13.74 86.74 3.415 R U
LEM160E 07 60.00 2.362 2.103 12.01 96.32 3.792 R U
LEM160E 08 65.00 2.559 1.869 10.67 105.89 4.169 R U
LEM160E 09 70.00 2.756 1.681 9.60 115.47 4.546 S V
LEM160E 10 80.00 3.150 1.399 7.99 134.62 5.300 S V
LEM160E 11 90.00 3.543 1.200 6.85 153.75 6.053 S V
LEM160E 12 100.00 3.937 1.049 5.99 172.90 6.807 T W
LEM160E 13 115.00 4.528 0.883 5.04 201.63 7.938 U X
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 161
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 034E 01 12.70 0.500 0.86 0.034 16.01 3.60 1.33 0.30 31.75 1.250 0.331 1.89 76.20 3.000 M P
LE 034E 02 34.93 1.375 0.249 1.42 93.85 3.695 M P
LE 034E 03 38.10 1.500 0.193 1.10 114.30 4.500 N Q
LE 034E 04 44.45 1.750 0.138 0.79 150.62 5.930 N Q
LE 034E 05 50.80 2.000 0.107 0.61 188.21 7.410 P R
LE 034E 06 57.15 2.250 0.088 0.50 224.79 8.850 P R
LE 037E 01 0.94 0.037 19.13 4.30 1.78 0.40 31.75 1.250 0.525 3.00 64.77 2.550 M P
LE 037E 02 34.93 1.375 0.385 2.20 79.88 3.145 M P
LE 037E 03 38.10 1.500 0.298 1.70 96.27 3.790 N Q
LE 037E 04 44.45 1.750 0.210 1.20 127.00 5.000 N Q
LE 037E 05 50.80 2.000 0.158 0.90 160.78 6.330 P R
LE 037E 06 57.15 2.250 0.135 0.77 185.67 7.310 P R
LE 037E 07 63.50 2.500 0.123 0.70 205.03 8.072 P S
LE 037E 08 69.85 2.750 0.105 0.60 234.90 9.248 Q T
LE 037E 09 76.20 3.000 0.088 0.50 274.14 10.793 Q T
LE 037E 10 88.90 3.500 0.070 0.40 335.94 13.226 Q T
LE 037E 11 101.60 4.000 0.053 0.30 431.70 16.996 R U
LE 037E 12 114.30 4.500 0.051 0.29 457.10 17.996 R U
LE 037E 13 127.00 5.000 0.035 0.20 620.22 24.418 S V
LE 041E 01 1.04 0.041 25.80 5.80 2.22 0.50 31.75 1.250 0.858 4.90 59.18 2.330 M Q
LE 041E 02 34.93 1.375 0.648 3.70 71.25 2.805 M Q
LE 041E 03 38.10 1.500 0.508 2.90 84.58 3.330 N R
LE 041E 04 44.45 1.750 0.368 2.10 108.46 4.270 N R
LE 041E 05 50.80 2.000 0.280 1.60 134.87 5.310 P S
LE 041E 06 57.15 2.250 0.228 1.30 160.78 6.330 P S
LE 041E 07 63.50 2.500 0.194 1.11 184.66 7.270 Q T
LE 041E 08 69.85 2.750 0.168 0.96 210.06 8.270 Q T
LE 041E 09 76.20 3.000 0.140 0.80 244.55 9.628 Q T
LE 041E 10 88.90 3.500 0.123 0.70 281.20 11.071 Q T
LE 041E 11 101.60 4.000 0.105 0.60 325.91 12.831 R U
LE 041E 12 114.30 4.500 0.088 0.50 383.29 15.090 R U
LE 041E 13 127.00 5.000 0.070 0.40 462.74 18.218 S V
LE 045E 00 1.14 0.045 33.36 7.50 3.11 0.70 25.40 1.000 3.818 21.80 33.27 1.310 M Q
LE 045E 0 31.75 1.250 1.349 7.70 54.10 2.130 M Q
LE 045E 01 34.93 1.375 0.998 5.70 65.15 2.565 M Q
LE 045E 02 38.10 1.500 0.823 4.70 74.93 2.950 N R
LE 045E 03 44.45 1.750 0.595 3.40 95.25 3.750 N R
LE 045E 04 50.80 2.000 0.455 2.60 117.35 4.620 P S
LE 045E 05 57.15 2.250 0.368 2.10 139.45 5.490 P S
LE 045E 06 63.50 2.500 0.315 1.80 159.51 6.280 P S
LE 045E 07 69.85 2.750 0.271 1.55 181.36 7.140 Q T
LE 045E 08 76.20 3.000 0.240 1.37 202.18 7.960 Q T
LE 045E 09 88.90 3.500 0.193 1.10 245.85 9.679 Q T
LE 045E 10 101.60 4.000 0.158 0.90 293.50 11.555 R U
LE 045E 11 114.30 4.500 0.140 0.80 330.20 13.000 R U
LE 045E 12 127.00 5.000 0.123 0.70 373.71 14.713 S V
LE 049E 01 1.24 0.049 44.48 10.00 3.91 0.88 31.75 1.250 2.067 11.80 51.31 2.020 M Q
LE 049E 02 38.10 1.500 1.271 7.26 70.10 2.760 N R
LE 049E 03 44.45 1.750 0.918 5.24 88.65 3.490 N R
LE 049E 04 50.80 2.000 0.701 4.00 108.71 4.280 P S
LE 049E 05 57.15 2.250 0.578 3.30 127.25 5.010 P S
LE 049E 06 63.50 2.500 0.490 2.80 146.30 5.760 P S
LE 049E 07 69.85 2.750 0.420 2.40 166.37 6.550 Q T
LE 049E 08 76.20 3.000 0.375 2.14 184.40 7.260 Q T
LE 049E 09 88.90 3.500 0.306 1.75 221.23 8.710 Q T
LE 049E 10 101.60 4.000 0.257 1.47 259.08 10.200 R U
LE 055E 0 1.40 0.055 58.71 13.20 5.78 1.30 31.75 1.250 3.615 20.64 46.48 1.830 P S
LE 055E 01 34.93 1.375 2.732 15.60 54.23 2.135 P S
LE 055E 02 38.10 1.500 2.277 13.00 61.47 2.420 Q T
LE 055E 03 44.45 1.750 1.646 9.40 76.71 3.020 Q T
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
162 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 055E 04 12.70 0.500 1.40 0.055 58.71 13.20 5.78 1.30 50.80 2.000 1.296 7.40 91.69 3.610 Q T
LE 055E 05 57.15 2.250 1.068 6.10 106.68 4.200 R U
LE 055E 06 63.50 2.500 0.911 5.20 121.67 4.790 R U
LE 055E 07 69.85 2.750 0.788 4.50 136.91 5.390 R U
LE 055E 08 76.20 3.000 0.683 3.90 153.67 6.050 S V
LE 055E 09 88.90 3.500 0.560 3.20 183.39 7.220 S V
LE 055E 10 101.60 4.000 0.473 2.70 213.61 8.410 T W
LE 055E 11 114.30 4.500 0.403 2.30 245.62 9.670 U X
LE 055E 12 127.00 5.000 0.363 2.07 273.05 10.750 U X
LE 063E 0 1.60 0.063 84.51 19.00 8.90 2.00 31.75 1.250 7.116 40.63 42.42 1.670 P S
LE 063E 01 34.93 1.375 5.499 31.40 48.64 1.915 P S
LE 063E 02 38.10 1.500 4.501 25.70 54.86 2.160 P S
LE 063E 03 44.45 1.750 3.310 18.90 67.31 2.650 Q T
LE 063E 04 50.80 2.000 2.609 14.90 79.76 3.140 Q T
LE 063E 05 57.15 2.250 2.154 12.30 92.20 3.630 Q T
LE 063E 06 63.50 2.500 1.874 10.70 103.89 4.090 R U
LE 063E 07 69.85 2.750 1.594 9.10 117.35 4.620 R U
LE 063E 08 76.20 3.000 1.436 8.20 128.78 5.070 S V
LE 063E 09 88.90 3.500 1.173 6.70 153.42 6.040 S V
LE 063E 10 101.60 4.000 0.981 5.60 178.82 7.040 T W
LE 063E 11 114.30 4.500 0.841 4.80 204.22 8.040 U X
LE 063E 12 127.00 5.000 0.753 4.30 227.33 8.950 U X
LE 067E 01 1.70 0.067 106.84 24.02 15.57 3.50 31.75 1.250 9.687 55.31 41.15 1.620 P S
LE 067E 02 38.10 1.500 6.231 35.58 52.83 2.080 P S
LE 067E 03 44.45 1.750 4.594 26.23 64.26 2.530 Q T
LE 067E 04 50.80 2.000 3.638 20.77 75.95 2.990 Q T
LE 067E 05 57.15 2.250 3.011 17.19 87.38 3.440 R U
LE 067E 06 63.50 2.500 2.567 14.66 99.06 3.900 R U
LE 067E 07 69.85 2.750 2.238 12.78 110.74 4.360 S V
LE 067E 08 76.20 3.000 1.984 11.33 122.17 4.810 S V
LE 067E 09 88.90 3.500 1.616 9.23 145.29 5.720 T W
LE 067E 10 101.60 4.000 1.364 7.79 168.40 6.630 U X
LE 067E 11 114.30 4.500 1.180 6.74 191.52 7.540 V Y
LE 067E 12 127.00 5.000 1.040 5.94 214.63 8.450 W Z
LE 075E 01 1.91 0.075 155.68 35.00 22.24 5.00 31.75 1.250 17.096 97.62 39.62 1.560 R U
LE 075E 02 38.10 1.500 11.202 63.96 50.04 1.970 R U
LE 075E 03 44.45 1.750 8.329 47.56 60.45 2.380 S V
LE 075E 04 50.80 2.000 6.629 37.85 70.87 2.790 S V
LE 075E 05 57.15 2.250 5.506 31.44 81.28 3.200 T W
LE 075E 06 63.50 2.500 4.694 26.80 91.95 3.620 T W
LE 075E 07 69.85 2.750 4.112 23.48 102.36 4.030 U X
LE 075E 08 76.20 3.000 3.650 20.84 112.78 4.440 U X
LE 075E 09 88.90 3.500 2.981 17.02 133.60 5.260 V Y
LE 075E 10 101.60 4.000 2.518 14.38 154.69 6.090 W Z
LE 075E 11 114.30 4.500 2.180 12.45 175.51 6.910 X BA
LE 075E 12 127.00 5.000 1.921 10.97 196.34 7.730 Y BB
LEM120EB 01† 13.00 0.512 1.20 0.047 42.20 9.49 6.56 1.48 30.20 1.189 1.280 7.31 58.10 2.287 M Q
LEM120EB 02† 37.40 1.472 0.800 4.57 82.10 3.232 N R
LEM120EB 03† 48.20 1.898 0.510 2.91 118.00 4.646 P S
LEM120EB 04† 66.20 2.606 0.320 1.83 178.20 7.016 P S
LEM120EB 05† 90.20 3.551 0.210 1.20 258.20 10.165 Q T
LEM200EC 01† 14.00 0.551 2.00 0.079 164.00 36.87 25.25 5.68 38.00 1.496 9.420 53.79 52.70 2.075 R U
LEM200EC 02† 50.00 1.969 5.880 33.58 73.60 2.898 S V
LEM200EC 03† 68.00 2.677 3.770 21.53 104.90 4.130 U X
LEM200EC 04† 98.00 3.858 2.350 13.42 157.00 6.181 W Z
LEM140ED 01† 15.00 0.591 1.40 0.055 57.10 12.84 8.50 1.91 34.90 1.374 1.550 8.85 66.10 2.602 N R
LEM140ED 02† 43.30 1.705 0.970 5.54 93.30 3.673 N R
LEM140ED 03† 55.90 2.201 0.620 3.54 134.00 5.276 P S
LEM140ED 04† 76.90 3.028 0.390 2.23 201.90 7.949 R U
LEM140ED 05† 105.00 4.134 0.260 1.48 292.00 11.496 T W
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 163
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 055F 00 15.88 0.625 1.40 0.055 46.70 10.50 4.45 1.00 38.10 1.500 1.720 9.82 62.74 2.470 N R
LE 055F 0 44.45 1.750 1.074 6.13 83.82 3.300 N R
LE 055F 01 50.80 2.000 0.788 4.50 104.39 4.110 P S
LE 055F 02 57.15 2.250 0.613 3.50 125.98 4.960 P S
LE 055F 03 63.50 2.500 0.508 2.90 146.81 5.780 Q T
LE 055F 04 69.85 2.750 0.438 2.50 166.37 6.550 Q T
LE 055F 05 76.20 3.000 0.368 2.10 191.01 7.520 R U
LE 055F 06 88.90 3.500 0.298 1.70 230.89 9.090 S V
LE 055F 07 101.60 4.000 0.245 1.40 274.07 10.790 T W
LE 063F 01 1.60 0.063 66.72 15.00 6.67 1.50 50.80 2.000 1.559 8.90 89.41 3.520 R U
LE 063F 02 57.15 2.250 1.173 6.70 108.20 4.260 R U
LE 063F 03 63.50 2.500 1.016 5.80 122.68 4.830 S V
LE 063F 04 69.85 2.750 0.858 4.90 139.95 5.510 S V
LE 063F 05 76.20 3.000 0.753 4.30 155.96 6.140 T W
LE 063F 06 88.90 3.500 0.595 3.40 189.74 7.470 U X
LE 063F 07 101.60 4.000 0.508 2.90 219.96 8.660 V Y
LE 063F 08 114.30 4.500 0.420 2.40 257.30 10.130 W Z
LE 063F 09 127.00 5.000 0.373 2.13 288.04 11.340 X BA
LE 069F 01 1.75 0.069 84.51 19.00 8.90 2.00 50.80 2.000 2.469 14.10 81.53 3.210 R U
LE 069F 02 57.15 2.250 1.979 11.30 95.25 3.750 R U
LE 069F 03 63.50 2.500 1.646 9.40 109.47 4.310 S V
LE 069F 04 69.85 2.750 1.419 8.10 123.19 4.850 S V
LE 069F 05 76.20 3.000 1.243 7.10 136.91 5.390 T W
LE 069F 06 88.90 3.500 0.981 5.60 166.12 6.540 U X
LE 069F 07 101.60 4.000 0.806 4.60 195.58 7.700 V Y
LE 069F 08 114.30 4.500 0.701 4.00 222.25 8.750 W Z
LE 069F 09 127.00 5.000 0.608 3.47 251.46 9.900 X BA
LEM160FC 01† 17.00 0.669 1.60 0.063 74.00 16.64 11.62 2.61 39.70 1.563 1.820 10.39 74.00 2.913 R V
LEM160FC 02† 49.30 1.941 1.140 6.51 104.10 4.098 R V
LEM160FC 03† 63.70 2.508 0.730 4.17 149.30 5.878 S W
LEM160FC 04† 87.70 3.453 0.460 2.63 224.70 8.846 T Y
LEM160FC 05† 120.00 4.724 0.300 1.71 325.00 12.795 V BA
LEM160G 01 19.00 0.748 1.60 0.063 56.90 12.79 5.40 1.21 50.00 1.969 1.224 6.99 92.18 3.629 R V
LEM160G 02 55.00 2.165 0.944 5.39 109.60 4.315 R V
LEM160G 03 60.00 2.362 0.767 4.38 127.05 5.002 S W
LEM160G 04 65.00 2.559 0.648 3.70 144.50 5.689 S W
LEM160G 05 70.00 2.756 0.559 3.19 162.20 6.386 S W
LEM160G 06 80.00 3.150 0.440 2.51 197.10 7.760 T Y
LEM160G 07 90.00 3.543 0.363 2.07 231.98 9.133 T Y
LEM160G 08 100.00 3.937 0.308 1.76 267.13 10.517 U Z
LEM160G 09 115.00 4.528 0.252 1.44 319.23 12.568 V BA
LEM160G 10 130.00 5.118 0.212 1.21 373.08 14.688 W BC
LEM160G 11 145.00 5.709 0.184 1.05 425.17 16.739 X BD
LE 049G 01 19.05 0.750 1.24 0.049 29.36 6.60 2.62 0.59 50.80 2.000 0.403 2.30 117.09 4.610 R V
LE 049G 02 57.15 2.250 0.263 1.50 159.00 6.260 R V
LE 049G 03 63.50 2.500 0.210 1.20 190.75 7.510 R V
LE 049G 04 69.85 2.750 0.158 0.90 239.52 9.430 S X
LE 049G 05 76.20 3.000 0.140 0.80 266.95 10.510 S X
LE 049G 06 82.55 3.250 0.123 0.70 300.74 11.840 T Z
LE 049G 07 88.90 3.500 0.105 0.60 343.41 13.520 T Z
LE 055G 01 1.40 0.055 39.14 8.80 3.56 0.80 50.80 2.000 0.595 3.40 110.49 4.350 R V
LE 055G 02 57.15 2.250 0.438 2.50 138.43 5.450 R V
LE 055G 03 63.50 2.500 0.350 2.00 165.10 6.500 R V
LE 055G 04 69.85 2.750 0.280 1.60 196.85 7.750 S X
LE 055G 05 76.20 3.000 0.245 1.40 221.23 8.710 S X
LE 055G 06 88.90 3.500 0.175 1.00 292.10 11.500 T Z
LE 063G 01 1.60 0.063 56.93 12.80 5.34 1.20 50.80 2.000 1.156 6.60 95.50 3.760 R V
LE 063G 02 57.15 2.250 0.858 4.90 117.35 4.620 R V
LE 063G 03 63.50 2.500 0.666 3.80 140.97 5.550 S W
LE 063G 04 69.85 2.750 0.560 3.20 162.05 6.380 S W
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
164 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 063G 05 19.05 0.750 1.60 0.063 56.93 12.80 5.34 1.20 76.20 3.000 0.473 2.70 185.42 7.300 T Y
LE 063G 06 88.90 3.500 0.368 2.10 229.11 9.020 T Y
LE 063G 07 101.60 4.000 0.298 1.70 274.83 10.820 U Z
LE 063G 08 114.30 4.500 0.245 1.40 324.87 12.790 V BA
LE 063G 09 127.00 5.000 0.210 1.20 372.62 14.670 W BC
LE 063G 10 139.70 5.500 0.193 1.10 407.67 16.050 X BD
LE 069G 01 1.75 0.069 73.39 16.50 7.12 1.60 50.80 2.000 1.795 10.25 87.63 3.450 S W
LE 069G 02 57.15 2.250 1.349 7.70 106.43 4.190 S W
LE 069G 03 63.50 2.500 1.077 6.15 124.97 4.920 T X
LE 069G 04 69.85 2.750 0.898 5.13 143.51 5.650 T X
LE 069G 05 76.20 3.000 0.755 4.31 164.08 6.460 U Z
LE 069G 06 88.90 3.500 0.590 3.37 201.17 7.920 U Z
LE 069G 07 101.60 4.000 0.478 2.73 240.28 9.460 V BA
LE 069G 08 114.30 4.500 0.406 2.32 277.37 10.920 W BB
LE 069G 09 127.00 5.000 0.350 2.00 316.23 12.450 X BC
LE 069G 10 139.70 5.500 0.310 1.77 353.57 13.920 Y BD
LE 075G 01 1.91 0.075 92.07 20.70 8.90 2.00 50.80 2.000 2.837 16.20 80.01 3.150 S W
LE 075G 02 57.15 2.250 2.067 11.80 97.28 3.830 S W
LE 075G 03 63.50 2.500 1.629 9.30 114.55 4.510 T X
LE 075G 04 69.85 2.750 1.384 7.90 130.05 5.120 T X
LE 075G 05 76.20 3.000 1.173 6.70 147.07 5.790 U Z
LE 075G 06 88.90 3.500 0.911 5.20 180.34 7.100 V BA
LE 075G 07 101.60 4.000 0.753 4.30 212.09 8.350 W BB
LE 075G 08 114.30 4.500 0.630 3.60 246.13 9.690 X BC
LE 075G 09 127.00 5.000 0.543 3.10 280.16 11.030 Y BD
LE 075G 10 139.70 5.500 0.478 2.73 313.69 12.350 Z BE
LE 075G 11 152.40 6.000 0.429 2.45 346.20 13.630 BA BF
LE 085G 01 2.16 0.085 140.11 31.50 12.45 2.80 50.80 2.000 5.492 31.36 74.17 2.920 T X
LE 085G 02 57.15 2.250 4.060 23.18 88.65 3.490 T X
LE 085G 03 63.50 2.500 3.219 18.38 103.12 4.060 U Z
LE 085G 04 69.85 2.750 2.594 14.81 119.13 4.690 U Z
LE 085G 05 76.20 3.000 2.277 13.00 132.33 5.210 V BA
LE 085G 06 88.90 3.500 1.751 10.00 161.80 6.370 W BB
LE 085G 07 101.60 4.000 1.436 8.20 190.50 7.500 X BC
LE 085G 08 114.30 4.500 1.212 6.92 219.71 8.650 Y BD
LE 085G 09 127.00 5.000 1.061 6.06 247.40 9.740 Z BE
LE 093G 01 2.36 0.093 177.92 40.00 15.57 3.50 50.80 2.000 7.969 45.50 71.12 2.800 T X
LE 093G 02 57.15 2.250 6.165 35.20 83.57 3.290 T X
LE 093G 03 63.50 2.500 4.834 27.60 97.03 3.820 U Z
LE 093G 04 69.85 2.750 4.116 23.50 109.22 4.300 U Z
LE 093G 05 76.20 3.000 3.573 20.40 121.67 4.790 V BA
LE 093G 06 88.90 3.500 2.767 15.80 147.57 5.810 W BB
LE 093G 07 101.60 4.000 2.259 12.90 173.48 6.830 X BC
LE 093G 08 114.30 4.500 1.909 10.90 199.39 7.850 Y BD
LE 093G 09 127.00 5.000 1.681 9.60 223.52 8.800 Z BE
LE 105G 01 2.67 0.105 249.18 56.02 26.69 6.00 50.80 2.000 14.711 84.00 66.04 2.600 V BB
LE 105G 02 57.15 2.250 11.279 64.40 76.96 3.030 V BB
LE 105G 03 63.50 2.500 9.121 52.08 87.88 3.460 W BC
LE 105G 04 69.85 2.750 7.650 43.68 99.06 3.900 W BD
LE 105G 05 76.20 3.000 6.571 37.52 109.98 4.330 X BE
LE 105G 06 88.90 3.500 5.198 29.68 131.83 5.190 Y BF
LE 105G 07 101.60 4.000 4.217 24.08 154.43 6.080 Z BG
LE 105G 08 114.30 4.500 3.629 20.72 175.51 6.910 BA BH
LE 105G 09 127.00 5.000 3.138 17.92 197.87 7.790 BB BJ
LE 112G 01 2.84 0.112 306.91 69.00 35.58 8.00 50.80 2.000 20.436 116.69 64.01 2.520 X BE
LE 112G 02 57.15 2.250 15.732 89.83 74.42 2.930 X BE
LE 112G 03 63.50 2.500 12.788 73.02 84.84 3.340 Y BF
LE 112G 04 69.85 2.750 10.772 61.51 95.00 3.740 Y BF
LE 112G 05 76.20 3.000 9.305 53.13 105.41 4.150 Z BG
LE 112G 06 88.90 3.500 7.314 41.76 125.98 4.960 BA BH
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 165
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 112G 07 19.05 0.750 2.84 0.112 306.91 69.00 35.58 8.00 101.60 4.000 6.025 34.40 146.56 5.770 BB BJ
LE 112G 08 114.30 4.500 5.121 29.24 167.39 6.590 BC BK
LE 112G 09 127.00 5.000 4.454 25.43 187.96 7.400 BD BL
LEM180GH 01† 20.00 0.787 1.80 0.071 87.00 19.56 13.05 2.93 46.00 1.811 1.780 10.16 87.90 3.461 S W
LEM180GH 02† 56.80 2.236 1.110 6.34 123.80 4.874 S W
LEM180GH 03† 73.00 2.874 0.710 4.05 178.00 7.008 U Z
LEM180GH 04† 100.00 3.937 0.440 2.51 267.00 10.512 W BB
LEM180GH 05† 136.00 5.354 0.290 1.66 387.00 15.236 Z BE
LE 055H 01 21.59 0.850 1.40 0.055 34.69 7.80 3.11 0.70 50.80 2.000 0.560 3.20 107.19 4.220 T X
LE 055H 02 57.15 2.250 0.368 2.10 143.00 5.630 T X
LE 055H 03 63.50 2.500 0.280 1.60 176.28 6.940 U Z
LE 055H 04 69.85 2.750 0.210 1.20 220.22 8.670 U Z
LE 063H 01 1.60 0.063 50.26 11.3 4.45 1.00 57.15 2.250 0.683 3.90 124.21 4.890 T X
LE 063H 02 63.50 2.500 0.508 2.90 153.67 6.050 T X
LE 063H 03 69.85 2.750 0.403 2.30 183.64 7.230 U Z
LE 063H 04 76.20 3.000 0.333 1.90 213.87 8.420 W BA
LE 063H 05 88.90 3.500 0.245 1.40 275.84 10.860 X BB
LE 075H 01 1.91 0.075 81.84 18.40 7.56 1.70 57.15 2.250 1.699 9.70 100.84 3.970 T Y
LE 075H 02 63.50 2.500 1.313 7.50 120.14 4.730 T Y
LE 075H 03 69.85 2.750 1.051 6.00 140.46 5.530 U Z
LE 075H 04 76.20 3.000 0.876 5.00 161.04 6.340 V BA
LE 075H 05 88.90 3.500 0.666 3.80 200.41 7.890 W BB
LE 075H 06 101.60 4.000 0.525 3.00 243.08 9.570 X BC
LE 075H 07 114.30 4.500 0.438 2.50 283.97 11.180 Y BD
LE 075H 08 120.65 4.750 0.403 2.30 305.05 12.010 Z BE
LE 075H 09 127.00 5.000 0.385 2.20 319.79 12.590 BA BF
LE 085H 0 2.16 0.085 115.20 25.90 10.68 2.40 50.80 2.000 4.729 27.00 72.90 2.870 S X
LE 085H 01 57.15 2.250 3.363 19.20 88.14 3.470 T Y
LE 085H 02 63.50 2.500 2.452 14.00 106.17 4.180 T Y
LE 085H 03 69.85 2.750 1.944 11.10 123.70 4.870 U Z
LE 085H 04 76.20 3.000 1.664 9.50 138.94 5.470 V BA
LE 085H 05 88.90 3.500 1.278 7.30 170.69 6.720 W BB
LE 085H 06 101.60 4.000 1.016 5.80 204.47 8.050 X BC
LE 085H 07 114.30 4.500 0.858 4.90 236.22 9.300 Y BD
LE 085H 08 120.65 4.750 0.788 4.50 253.24 9.970 Z BE
LE 085H 09 127.00 5.000 0.718 4.10 272.54 10.730 BA BF
LE 085H 10 139.70 5.500 0.630 3.60 305.56 12.030 BB BG
LE 085H 11 152.40 6.000 0.569 3.25 336.04 13.230 BC BH
LEM200HB 01† 22.00 0.866 2.00 0.079 107.00 24.05 16.11 3.62 50.80 2.000 2.030 11.59 95.50 3.760 S X
LEM200HB 02† 62.80 2.472 1.270 7.25 134.30 5.287 T Y
LEM200HB 03† 80.80 3.181 0.810 4.63 192.80 7.591 W BB
LEM200HB 04† 111.00 4.370 0.510 2.91 290.00 11.417 Y BD
LEM200HB 05† 151.00 5.945 0.340 1.94 419.00 16.496 BC BH
LE 063J 01 25.40 1.000 1.60 0.063 43.15 9.70 4.00 0.90 63.50 2.500 0.455 2.60 149.35 5.880 Y BC
LE 063J 02 69.85 2.750 0.333 1.90 187.45 7.380 Y BC
LE 063J 03 76.20 3.000 0.263 1.50 225.30 8.870 Z BD
LE 063J 04 82.55 3.250 0.210 1.20 268.73 10.580 Z BD
LE 075J 01 1.91 0.075 69.83 15.70 6.23 1.40 63.50 2.500 1.103 6.30 121.16 4.770 Y BE
LE 075J 02 69.85 2.750 0.806 4.60 148.84 5.860 Y BE
LE 075J 03 76.20 3.000 0.630 3.60 177.04 6.970 Z BF
LE 075J 04 88.90 3.500 0.455 2.60 228.60 9.000 Z BF
LE 075J 05 101.60 4.000 0.350 2.00 283.21 11.150 BA BG
LE 075J 06 114.30 4.500 0.298 1.70 327.91 12.910 BB BG
LE 075J 07 127.00 5.000 0.245 1.40 386.33 15.210 BC BJ
LE 085J 01 2.16 0.085 99.19 22.30 8.90 2.00 69.85 2.750 1.489 8.50 130.56 5.140 Y BE
LE 085J 02 76.20 3.000 1.191 6.80 152.15 5.990 Z BF
LE 085J 03 88.90 3.500 0.876 5.00 192.02 7.560 Z BF
LE 085J 04 101.60 4.000 0.683 3.90 233.93 9.210 BA BG
LE 085J 05 114.30 4.500 0.560 3.20 275.34 10.840 BB BH
LE 085J 06 127.00 5.000 0.473 2.70 318.01 12.520 BC BJ
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
166 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 095J 0 25.40 1.000 2.41 0.095 133.44 30.00 12.01 2.70 63.50 2.500 4.221 24.10 92.28 3.633 Y BD
LE 095J 01 69.85 2.750 2.627 15.00 116.08 4.570 Y BE
LE 095J 02 76.20 3.000 2.137 12.20 133.10 5.240 Z BF
LE 095J 03 88.90 3.500 1.524 8.70 168.66 6.640 Z BF
LE 095J 04 101.60 4.000 1.208 6.90 202.18 7.960 BA BG
LE 095J 05 114.30 4.500 0.981 5.60 238.25 9.380 BB BH
LE 095J 06 127.00 5.000 0.841 4.80 271.53 10.690 BC BJ
LE 095J 07 139.70 5.500 0.722 4.12 308.10 12.130 BD BK
LE 095J 08 152.40 6.000 0.641 3.66 341.88 13.460 BE BL
LE 095J 09 165.10 6.500 0.573 3.27 377.19 14.850 BF BM
LE 095J 10 177.80 7.000 0.518 2.96 411.99 16.220 BG BN
LE 095J 11 203.20 8.000 0.420 2.40 492.07 19.373 BH BN
LE 095J 12 228.60 9.000 0.368 2.10 558.80 22.000 BJ BP
LE 105J 0 2.67 0.105 177.92 40.00 17.79 4.00 63.50 2.500 6.830 39.00 86.94 3.423 Z BE
LE 105J 01 69.85 2.750 4.063 23.20 109.22 4.300 Z BE
LE 105J 02 76.20 3.000 3.415 19.50 123.19 4.850 BA BF
LE 105J 03 88.90 3.500 2.434 13.90 154.69 6.090 BB BG
LE 105J 04 101.60 4.000 1.944 11.10 183.90 7.240 BC BH
LE 105J 05 114.30 4.500 1.580 9.02 215.65 8.490 BD BJ
LE 105J 06 127.00 5.000 1.354 7.73 245.36 9.660 BE BK
LE 105J 07 139.70 5.500 1.168 6.67 276.86 10.900 BF BL
LE 105J 08 152.40 6.000 1.028 5.87 308.10 12.130 BG BM
LE 105J 09 165.10 6.500 0.930 5.31 337.31 13.280 BH BP
LE 105J 10 177.80 7.000 0.842 4.81 367.79 14.480 BJ BQ
LE 105J 11 203.20 8.000 0.736 4.20 420.90 16.571 BK BQ
LE 105J 12 228.60 9.000 0.630 3.60 482.60 19.000 BL BR
LE 115J 0 2.92 0.115 222.40 50.00 22.24 5.00 63.50 2.500 10.578 60.40 82.42 3.245 Z BE
LE 115J 01 69.85 2.750 6.690 38.20 99.82 3.930 BA BF
LE 115J 02 76.20 3.000 5.289 30.20 114.05 4.490 BA BF
LE 115J 03 88.90 3.500 3.976 22.70 139.19 5.480 BB BG
LE 115J 04 101.60 4.000 3.100 17.70 166.12 6.540 BC BH
LE 115J 05 114.30 4.500 2.539 14.50 193.04 7.600 BD BJ
LE 115J 06 127.00 5.000 2.189 12.50 218.44 8.600 BE BK
LE 115J 07 139.70 5.500 1.891 10.80 245.62 9.670 BF BL
LE 115J 08 152.40 6.000 1.664 9.50 272.80 10.740 BG BM
LE 115J 09 165.10 6.500 1.506 8.60 297.94 11.730 BJ BQ
LE 115J 10 177.80 7.000 1.366 7.80 324.36 12.770 BL BS
LE 115J 11 203.20 8.000 1.173 6.70 373.79 14.716 BM BS
LE 115J 12 228.60 9.000 1.016 5.80 425.68 16.759 BN BT
LE 125J 0 3.18 0.125 311.36 70.00 31.14 7.00 63.50 2.500 15.289 87.30 81.84 3.222 BB BF
LE 125J 01 69.85 2.750 10.194 58.21 97.28 3.830 BC BJ
LE 125J 02 76.20 3.000 8.340 47.62 109.73 4.320 BD BK
LE 125J 03 88.90 3.500 6.116 34.92 134.62 5.300 BE BL
LE 125J 04 101.60 4.000 4.828 27.57 159.77 6.290 BF BM
LE 125J 05 114.30 4.500 3.990 22.78 184.66 7.270 BG BN
LE 125J 06 127.00 5.000 3.398 19.40 209.55 8.250 BH BP
LE 125J 07 139.70 5.500 2.960 16.90 234.44 9.230 BJ BQ
LE 125J 08 152.40 6.000 2.622 14.97 259.33 10.210 BK BR
LE 125J 09 165.10 6.500 2.417 13.80 281.05 11.065 BK BQ
LE 125J 10 177.80 7.000 2.189 12.50 305.82 12.040 BL BR
LE 125J 11 203.20 8.000 1.839 10.50 355.60 14.000 BM BS
LE 125J 12 228.60 9.000 1.576 9.00 406.40 16.000 BN BT
LE 135J 0 3.43 0.135 378.08 85.00 40.03 9.00 63.50 2.500 23.496 134.16 77.90 3.067 BE BL
LE 135J 01 69.85 2.750 15.102 86.23 92.20 3.630 BE BL
LE 135J 02 76.20 3.000 12.413 70.88 103.38 4.070 BF BM
LE 135J 03 88.90 3.500 9.156 52.28 125.73 4.950 BG BN
LE 135J 04 101.60 4.000 7.252 41.41 148.34 5.840 BH BP
LE 135J 05 114.30 4.500 6.004 34.28 170.69 6.720 BJ BQ
LE 135J 06 127.00 5.000 5.123 29.25 193.04 7.600 BK BR
LE 135J 07 139.70 5.500 4.466 25.50 215.39 8.480 BL BS
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 167
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 135J 08 25.40 1.000 3.43 0.135 378.08 85.00 40.03 9.00 152.40 6.000 3.960 22.61 237.74 9.360 BM BT
LE 135J 09 165.10 6.500 3.643 20.80 257.91 10.154 BN BT
LE 135J 10 177.80 7.000 3.310 18.90 279.93 11.021 BP BT
LE 135J 11 203.20 8.000 2.785 15.90 324.61 12.780 BQ BU
LE 135J 12 228.60 9.000 2.399 13.70 369.49 14.547 BR BU
LE 148J 01 3.76 0.148 498.40 112.05 43.06 9.68 63.50 2.500 35.517 202.80 76.20 3.000 BF BL
LE 148J 02 69.85 2.750 27.899 159.30 86.18 3.393 BG BM
LE 148J 03 76.20 3.000 21.699 123.90 97.18 3.826 BH BN
LE 148J 04 88.90 3.500 16.270 92.90 116.89 4.602 BJ BP
LE 148J 05 101.60 4.000 12.592 71.90 137.77 5.424 BK BQ
LE 148J 06 114.30 4.500 10.280 58.70 158.60 6.244 BL BR
LE 148J 07 127.00 5.000 8.687 49.60 179.43 7.064 BM BS
LE 148J 08 139.70 5.500 7.653 43.70 199.21 7.843 BN BT
LE 148J 09 152.40 6.000 6.743 38.50 219.94 8.659 BP BU
LE 148J 10 165.10 6.500 6.007 34.30 240.92 9.485 BQ BV
LE 148J 11 177.80 7.000 5.429 31.00 261.67 10.302 BR BW
LE 148J 12 203.20 8.000 4.588 26.20 302.44 11.907 BS BX
LE 148J 13 228.60 9.000 3.940 22.50 344.17 13.550 BT BY
LE 085JK 01 28.58 1.125 2.16 0.085 93.41 21.00 8.41 1.89 76.20 3.000 1.226 7.00 145.54 5.730 BA BF
LE 085JK 02 88.90 3.500 0.753 4.30 201.68 7.940 BB BG
LE 085JK 03 101.60 4.000 0.543 3.10 258.06 10.160 BC BH
LE 085JK 04 114.30 4.500 0.438 2.50 308.36 12.140 BD BJ
LE 085JK 05 127.00 5.000 0.350 2.00 369.82 14.560 BE BK
LE 085JK 06 139.70 5.500 0.298 1.70 425.20 16.740 BF BL
LE 085JK 07 152.40 6.000 0.263 1.50 476.00 18.740 BG BM
LE 085JK 08 165.10 6.500 0.228 1.30 538.48 21.200 BH BN
LE 085JK 09 177.80 7.000 0.210 1.20 582.42 22.930 BJ BQ
LE 105JK 01 2.67 0.105 168.13 37.80 15.12 3.40 76.20 3.000 3.433 19.60 120.90 4.760 BA BF
LE 105JK 02 88.90 3.500 2.189 12.50 158.75 6.250 BB BG
LE 105JK 03 101.60 4.000 1.611 9.20 196.60 7.740 BC BH
LE 105JK 04 114.30 4.500 1.278 7.30 233.93 9.210 BD BJ
LE 105JK 05 127.00 5.000 1.051 6.00 272.54 10.730 BE BK
LE 105JK 06 139.70 5.500 0.893 5.10 311.15 12.250 BF BL
LE 105JK 07 152.40 6.000 0.788 4.50 346.46 13.640 BG BM
LE 105JK 08 165.10 6.500 0.683 3.90 389.13 15.320 BH BN
LE 105JK 09 177.80 7.000 0.613 3.50 427.48 16.830 BJ BQ
LE 125JK 01 3.18 0.125 265.10 59.60 24.51 5.51 76.20 3.000 8.091 46.20 105.94 4.171 BD BJ
LE 125JK 02 88.90 3.500 5.307 30.30 134.24 5.285 BE BK
LE 125JK 03 101.60 4.000 3.940 22.50 162.66 6.404 BF BL
LE 125JK 04 114.30 4.500 3.135 17.90 191.06 7.522 BG BM
LE 125JK 05 127.00 5.000 2.609 14.90 219.20 8.630 BH BN
LE 125JK 06 139.70 5.500 2.224 12.70 247.88 9.759 BJ BP
LE 125JK 07 152.40 6.000 1.944 11.10 276.17 10.873 BK BQ
LE 125JK 08 165.10 6.500 1.734 9.90 303.89 11.964 BL BR
LE 125JK 09 177.80 7.000 1.559 8.90 332.16 13.077 BM BS
LE 095K 01 31.75 1.250 2.41 0.095 115.65 26.00 10.45 2.35 82.55 3.250 1.275 7.28 165.10 6.500 BB BH
LE 095K 02 88.90 3.500 1.026 5.86 191.52 7.540 BB BH
LE 095K 03 101.60 4.000 0.739 4.22 243.84 9.600 BC BJ
LE 095K 04 114.30 4.500 0.578 3.30 296.42 11.670 BD BK
LE 095K 05 127.00 5.000 0.475 2.71 348.74 13.730 BE BL
LE 095K 06 139.70 5.500 0.403 2.30 400.81 15.780 BF BM
LE 095K 07 152.40 6.000 0.349 1.99 454.15 17.880 BG BN
LE 095K 08 165.10 6.500 0.308 1.76 506.48 19.940 BH BP
LE 095K 09 177.80 7.000 0.275 1.57 560.32 22.060 BJ BQ
LE 095K 10 190.50 7.500 0.250 1.43 610.62 24.040 BK BR
LE 115K 01 2.92 0.115 200.16 45.00 18.90 4.25 82.55 3.250 3.163 18.06 139.95 5.510 BF BK
LE 115K 02 88.90 3.500 2.574 14.70 159.26 6.270 BF BK
LE 115K 03 101.60 4.000 1.877 10.72 198.12 7.800 BG BL
LE 115K 04 114.30 4.500 1.476 8.43 236.98 9.330 BH BM
LE 115K 05 127.00 5.000 1.217 6.95 275.84 10.860 BJ BN
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
168 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 115K 06 31.75 1.250 2.92 0.115 200.16 45.00 18.90 4.25 139.70 5.500 1.035 5.91 314.96 12.400 BK BP
LE 115K 07 152.40 6.000 0.900 5.14 353.82 13.930 BK BQ
LE 115K 08 165.10 6.500 0.797 4.55 392.68 15.460 BL BR
LE 115K 09 177.80 7.000 0.715 4.08 431.55 16.990 BM BS
LE 115K 10 190.50 7.500 0.648 3.70 470.15 18.510 BN BT
LE 135K 01 3.43 0.135 289.12 65.00 27.58 6.20 82.55 3.250 7.093 40.50 119.38 4.700 BJ BL
LE 135K 02 88.90 3.500 6.025 34.40 132.33 5.210 BJ BL
LE 135K 03 101.60 4.000 4.466 25.50 160.27 6.310 BK BM
LE 135K 04 114.30 4.500 3.450 19.70 189.99 7.480 BK BM
LE 135K 05 127.00 5.000 2.872 16.40 218.19 8.590 BL BP
LE 135K 06 139.70 5.500 2.382 13.60 249.43 9.820 BL BP
LE 135K 07 152.40 6.000 2.084 11.90 277.88 10.940 BM BR
LE 135K 08 165.10 6.500 1.856 10.60 306.07 12.050 BM BR
LE 135K 09 177.80 7.000 1.664 9.50 335.03 13.190 BN BS
LE 135K 10 190.50 7.500 1.506 8.60 364.24 14.340 BP BT
LE 125L 01 38.10 1.500 3.18 0.125 200.16 45.00 18.68 4.2 114.30 4.500 1.576 9.00 229.36 9.030 BJ BN
LE 125L 02 127.00 5.000 1.243 7.10 273.05 10.750 BK BP
LE 125L 03 139.70 5.500 1.028 5.87 316.23 12.450 BL BQ
LE 125L 04 152.40 6.000 0.876 5.00 359.66 14.160 BM BR
LE 125L 05 165.10 6.500 0.762 4.35 403.35 15.880 BN BS
LE 125L 06 177.80 7.000 0.676 3.86 446.28 17.570 BP BT
LE 125L 07 190.50 7.500 0.606 3.46 489.97 19.290 BQ BU
LE 125L 08 203.20 8.000 0.550 3.14 533.15 20.990 BR BV
LE 148L 01 3.76 0.148 314.16 70.63 29.80 6.7 114.30 4.500 4.256 24.30 181.13 7.131 BP BS
LE 148L 02 127.00 5.000 3.275 18.70 213.84 8.419 BQ BT
LE 148L 03 139.70 5.500 2.680 15.30 245.82 9.678 BR BU
LE 148L 04 152.40 6.000 2.259 12.90 278.28 10.956 BS BV
LE 148L 05 165.10 6.500 1.961 11.20 310.08 12.208 BT BW
LE 148L 06 177.80 7.000 1.716 9.80 343.48 13.523 BU BX
LE 148L 07 190.50 7.500 1.541 8.80 375.03 14.765 BV BY
LE 148L 08 203.20 8.000 1.384 7.90 408.74 16.092 BW BZ
LE 177L 01 4.50 0.177 538.03 120.96 48.79 10.97 114.30 4.500 10.490 59.90 160.93 6.336 BQ BW
LE 177L 02 127.00 5.000 8.214 46.90 186.56 7.345 BR BX
LE 177L 03 139.70 5.500 6.743 38.50 212.27 8.357 BS BY
LE 177L 04 152.40 6.000 5.727 32.70 237.85 9.364 BT BZ
LE 177L 05 165.10 6.500 4.974 28.40 263.47 10.373 BU CA
LE 177L 06 177.80 7.000 4.396 25.10 289.10 11.382 BV CB
LE 177L 07 190.50 7.500 3.940 22.50 314.66 12.388 BW CC
LE 177L 08 203.20 8.000 3.555 20.30 340.82 13.418 BX CD
LE 148N 01 44.45 1.750 3.76 0.148 286.14 64.33 25.75 5.79 127.00 5.000 2.627 15.00 226.14 8.903 BR BX
LE 148N 02 139.70 5.500 2.014 11.50 268.99 10.590 BS BY
LE 148N 03 152.40 6.000 1.646 9.40 310.59 12.228 BT BZ
LE 148N 04 165.10 6.500 1.384 7.90 353.31 13.910 BU CA
LE 148N 05 177.80 7.000 1.191 6.80 396.47 15.609 BV CB
LE 148N 06 190.50 7.500 1.051 6.00 438.30 17.256 BW CC
LE 148N 07 203.20 8.000 0.928 5.30 483.74 19.045 BX CD
LE 148N 08 228.60 9.000 0.771 4.40 566.52 22.304 BY CE
LE 177N 01 4.50 0.177 469.31 105.51 42.26 9.5 127.00 5.000 6.410 36.60 193.62 7.623 BS BY
LE 177N 02 139.70 5.500 4.991 28.50 225.27 8.869 BT BZ
LE 177N 03 152.40 6.000 4.081 23.30 257.07 10.121 BU CA
LE 177N 04 165.10 6.500 3.450 19.70 288.90 11.374 BV CB
LE 177N 05 177.80 7.000 2.995 17.10 320.42 12.615 BW CC
LE 177N 06 190.50 7.500 2.645 15.10 351.99 13.858 BX CD
LE 177N 07 203.20 8.000 2.364 13.50 383.84 15.112 BY CE
LE 177N 08 228.60 9.000 1.961 11.20 446.33 17.572 BZ CF
LE 207N 01 5.26 0.207 723.02 162.55 64.90 14.59 127.00 5.000 14.046 80.20 173.86 6.845 BT BZ
LE 207N 02 139.70 5.500 11.068 63.20 199.16 7.841 BU CA
LE 207N 03 152.40 6.000 9.124 52.10 224.54 8.840 BV CB
LE 207N 04 165.10 6.500 7.758 44.30 249.94 9.840 BW CC
LE 207N 05 177.80 7.000 6.760 38.60 275.16 10.833 BX CD
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 169
EXTENSION SPRINGS
free length inside loops
MM IN MM IN N LB N LB MM IN N/mm LB/IN MM IN M S
LE 207N 06 44.45 1.750 5.26 0.207 723.02 162.55 64.90 14.59 190.50 7.500 5.990 34.20 300.38 11.826 BY CE
LE 207N 07 203.20 8.000 5.359 30.60 326.01 12.835 BZ CF
LE 207N 08 228.60 9.000 4.448 25.40 376.56 14.825 CA CG
LE 177P 01 50.80 2.000 4.50 0.177 413.44 92.95 37.23 8.37 139.70 5.500 4.238 24.20 228.47 8.995 BU CA
LE 177P 02 152.40 6.000 3.275 18.70 267.28 10.523 BV CB
LE 177P 03 165.10 6.500 2.680 15.30 305.51 12.028 BW CC
LE 177P 04 177.80 7.000 2.259 12.90 344.35 13.557 BX CD
LE 177P 05 190.50 7.500 1.944 11.10 384.05 15.120 BY CE
LE 177P 06 203.20 8.000 1.716 9.80 422.43 16.631 BZ CF
LE 177P 07 228.60 9.000 1.384 7.90 500.53 19.706 CA CG
LE 177P 08 254.00 10.000 1.156 6.60 579.50 22.815 CB CH
LE 207P 01 5.26 0.207 636.60 143.12 57.29 12.88 139.70 5.500 9.194 52.50 202.72 7.981 BV CB
LE 207P 02 152.40 6.000 7.198 41.10 232.89 9.169 BW CC
LE 207P 03 165.10 6.500 5.919 33.80 262.97 10.353 BX CD
LE 207P 04 177.80 7.000 5.026 28.70 293.07 11.538 BY CE
LE 207P 05 190.50 7.500 4.361 24.90 323.37 12.731 BZ CF
LE 207P 06 203.20 8.000 3.853 22.00 353.57 13.920 CA CG
LE 207P 07 228.60 9.000 3.135 17.90 413.41 16.276 CB CH
LE 207P 08 254.00 10.000 2.627 15.00 474.55 18.683 CC CJ
† Indicates DIN Compression Springs meeting the design parameters outlined in Standard DIN 2098.
170 Spring rates and maximum loads relate only to music wire. When using stainless steel, multiply by 0.833.
TORSION SPRINGS
Tolerances
Tolerances on Outside Diameter
INCHES MILLIMETERS
.093” – .125” ± .004” 2.36 – 3.17 ± .10mm
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 171
TORSION SPRINGS
Radius
Guide to using tables
please note that R (radius) where force is Outside Diameter
Length of Leg
applied, is always 1/2 of A (length of leg). of spring body.
lengths of leg are shown on A in
Dotted lines of legs show loaded position
the sketches below. Suggested Mandrel
where values of T (Torque) will be achieved at R
size allows approximately
(Radius)
a 10% clearance for the
TORSION SPRINGS 90º various deflections shown in
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated) examples below. If greater
Lee Stock Number
LEE NOMINAL (T) MAXIMUM (A) SUGGESTED (L) BODY
deflections are required, we
DEFLECTION PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
Please add suffix M for Music Wire NUMBER DIAMETER (see footnotes) TORQUE
RADIUS
OF LEG
DIAMETER
SIZE APPROX. NO. OF
COILS
Music
Wire
302
Stainless
Deflection to LTMR050E 01
LTML050E 07 17.90 0.159 45 10.00 0.394 20.00 0.787 4.50 0.177 3.00 0.118 1.50 0.059 2.25
L
L
M
M
LTMR050E 07 L M
Maximum Torque LTML050J 01 17.90 0.159 139 10.00 0.394 20.00 0.787 7.00 0.276 5.00 0.197 2.49 0.098 4.25 L M
LTMR050J 01 L M
2 To calculate torque values other than those listed (Position of Ends), a direct proportion may be used.
F Approx
Body
90 Deflection 180 270 360 Length
L
R
A
Mandrel Size
A A
6 Please note that the torque listed in the following torsion spring tables relates only to music wire.
When choosing stainless steel multiply the factors by 0.933.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 172
TORSION SPRINGS 90º
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL012A 01 0.30 0.012 5.65 0.050 90 4.76 0.188 9.53 0.375 2.67 0.105 1.65 0.065 1.37 0.054 3.25 L M
LTR012A 01 L M
LTL012A 07 5.42 0.048 90 6.35 0.250 12.70 0.500 3.71 0.146 2.39 0.094 0.99 0.039 2.25 L M
LTR012A 07 L M
LTL014A 01 0.36 0.014 8.47 0.075 90 6.35 0.250 12.70 0.500 3.15 0.124 1.57 0.062 1.65 0.065 3.25 L M
LTR014A 01 L M
LTL014A 07 8.47 0.075 90 6.35 0.250 12.70 0.500 4.37 0.172 3.18 0.125 1.17 0.046 2.25 L M
LTR014A 07 L M
LTL015B 01 0.38 0.015 11.30 0.100 90 6.35 0.250 12.70 0.500 2.82 0.111 1.57 0.062 1.73 0.068 3.25 L M
LTR015B 01 L M
LTL015B 07 11.30 0.100 90 6.35 0.250 12.70 0.500 4.34 0.171 2.39 0.094 1.24 0.049 2.25 L M
LTR015B 07 L M
LTML040A 01 0.40 0.016 9.97 0.088 68 8.00 0.315 16.00 0.630 2.80 0.110 1.50 0.059 2.01 0.079 4.25 L M
LTMR040A 01 L M
LTML040A 07 9.97 0.088 36 8.00 0.315 16.00 0.630 2.80 0.110 1.50 0.059 1.19 0.047 2.25 L M
LTMR040A 07 L M
LTML040C 01 9.97 0.088 96 8.00 0.315 16.00 0.630 3.80 0.150 2.50 0.098 2.01 0.079 4.25 L M
LTMR040C 01 L M
LTML040C 07 9.97 0.088 51 8.00 0.315 16.00 0.630 3.80 0.150 2.50 0.098 1.19 0.047 2.25 L M
LTMR040C 07 L M
LTML040G 01 9.97 0.088 153 8.00 0.315 16.00 0.630 5.80 0.228 4.00 0.157 2.01 0.079 4.25 L M
LTMR040G 01 L M
LTML040G 07 9.97 0.088 81 8.00 0.315 16.00 0.630 5.80 0.228 4.00 0.157 1.19 0.047 2.25 L M
LTMR040G 07 L M
LTL017C 01 0.43 0.017 14.12 0.125 90 6.35 0.250 12.70 0.500 4.06 0.160 2.36 0.093 1.96 0.077 3.25 L M
LTR017C 01 L M
LTL017C 07 14.12 0.125 90 9.53 0.375 19.05 0.750 5.66 0.223 3.96 0.156 1.40 0.055 2.25 L M
LTR017C 07 L M
LTL018C 01 0.46 0.018 16.95 0.150 90 6.35 0.250 12.70 0.500 4.52 0.178 2.77 0.109 2.03 0.080 3.25 L M
LTR018C 01 L M
LTL018C 07 16.95 0.150 90 9.53 0.375 19.05 0.750 5.94 0.234 3.96 0.156 1.47 0.058 2.25 L M
LTR018C 07 L M
LTML050B 01 0.50 0.020 17.90 0.159 64 10.00 0.394 20.00 0.787 3.50 0.138 2.00 0.079 2.49 0.098 4.25 L M
LTMR050B 01 L M
LTML050B 07 17.90 0.159 34 10.00 0.394 20.00 0.787 3.50 0.138 2.00 0.079 1.50 0.059 2.25 L M
LTMR050B 07 L M
LTML050E 01 17.90 0.159 86 10.00 0.394 20.00 0.787 4.50 0.177 3.00 0.118 2.49 0.098 4.25 L M
LTMR050E 01 L M
LTML050E 07 17.90 0.159 45 10.00 0.394 20.00 0.787 4.50 0.177 3.00 0.118 1.50 0.059 2.25 L M
LTMR050E 07 L M
LTML050J 01 17.90 0.159 139 10.00 0.394 20.00 0.787 7.00 0.276 5.00 0.197 2.49 0.098 4.25 L M
LTMR050J 01 L M
LTML050J 07 17.90 0.159 74 10.00 0.394 20.00 0.787 7.00 0.276 5.00 0.197 1.50 0.059 2.25 L M
LTMR050J 07 L M
LTL020D 01 0.51 0.020 22.60 0.200 90 9.53 0.375 19.05 0.750 4.85 0.191 3.05 0.120 2.29 0.090 3.25 L M
LTR020D 01 L M
LTL020D 07 22.60 0.200 90 12.70 0.500 25.40 1.000 6.78 0.267 4.78 0.188 1.65 0.065 2.25 L M
LTR020D 07 L M
LTL021D 01 0.53 0.021 28.25 0.250 90 9.53 0.375 19.05 0.750 5.08 0.200 3.05 0.120 2.41 0.095 3.25 L M
LTR021D 01 L M
LTL021D 07 28.25 0.250 90 12.70 0.500 25.40 1.000 6.63 0.261 4.78 0.188 1.73 0.068 2.25 L M
LTR021D 07 L M
LTL023D 01 0.58 0.023 37.28 0.330 90 9.53 0.375 19.05 0.750 5.18 0.204 3.18 0.125 2.62 0.103 3.25 L K
LTR023D 01 L K
LTL023D 07 37.28 0.330 90 12.70 0.500 25.40 1.000 7.24 0.285 4.78 0.188 1.91 0.075 2.25 L M
LTR023D 07 L M
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 173
90º TORSION SPRINGS
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTML060D 01 0.60 0.024 31.94 0.283 63 11.00 0.433 22.00 0.866 4.20 0.165 2.50 0.098 3.00 0.118 4.25 L M
LTMR060D 01 L M
LTML060D 07 31.94 0.283 34 11.00 0.433 22.00 0.866 4.20 0.165 2.50 0.098 1.80 0.071 2.25 L M
LTMR060D 07 L M
LTML060H 01 31.94 0.283 99 11.00 0.433 22.00 0.866 6.20 0.244 4.00 0.157 3.00 0.118 4.25 L M
LTMR060H 01 L M
LTML060H 07 31.94 0.283 52 11.00 0.433 22.00 0.866 6.20 0.244 4.00 0.157 1.80 0.071 2.25 L M
LTMR060H 07 L M
LTML060L 01 31.94 0.283 134 11.00 0.433 22.00 0.866 8.20 0.323 6.00 0.236 3.00 0.118 4.25 M N
LTMR060L 01 M N
LTML060L 07 31.94 0.283 71 11.00 0.433 22.00 0.866 8.20 0.323 6.00 0.236 1.80 0.071 2.25 L M
LTMR060L 07 L M
LTL025E 01 0.64 0.025 47.45 0.420 90 9.53 0.375 19.05 0.750 5.99 0.236 3.56 0.140 2.79 0.110 3.25 L M
LTR025E 01 L M
LTL025E 07 47.45 0.420 90 12.70 0.500 25.40 1.000 7.92 0.312 5.56 0.219 2.06 0.081 2.25 M N
LTR025E 07 M N
LTL028E 01 0.71 0.028 62.14 0.550 90 12.70 0.500 25.40 1.000 6.78 0.267 4.45 0.175 3.18 0.125 3.25 M N
LTR028E 01 M N
LTL028E 07 62.14 0.550 90 12.70 0.500 25.40 1.000 9.47 0.373 6.35 0.250 2.31 0.091 2.25 M P
LTR028E 07 M P
LTML075F 01 0.75 0.030 58.84 0.521 59 12.50 0.492 25.00 0.984 5.00 0.197 3.00 0.118 3.76 0.148 4.25 L M
LTMR075F 01 L M
LTML075F 07 58.84 0.521 31 12.50 0.492 25.00 0.984 5.00 0.197 3.00 0.118 2.26 0.089 2.25 L M
LTMR075F 07 L M
LTML075K 01 58.84 0.521 94 12.50 0.492 25.00 0.984 7.50 0.295 5.00 0.197 3.76 0.148 4.25 L M
LTMR075K 01 L M
LTML075K 07 58.84 0.521 50 12.50 0.492 25.00 0.984 7.50 0.295 5.00 0.197 2.26 0.089 2.25 L M
LTMR075K 07 L M
LTML075Q 01 58.84 0.521 135 12.50 0.492 25.00 0.984 10.50 0.413 8.00 0.315 3.76 0.148 4.25 R S
LTMR075Q 01 R S
LTML075Q 07 58.84 0.521 72 12.50 0.492 25.00 0.984 10.50 0.413 8.00 0.315 2.26 0.089 2.25 P Q
LTMR075Q 07 P Q
LTL030F 01 0.76 0.030 76.83 0.680 90 12.70 0.500 25.40 1.000 7.75 0.305 5.21 0.205 3.35 0.132 3.25 M N
LTR030F 01 M N
LTL030F 07 76.83 0.680 90 12.70 0.500 25.40 1.000 10.11 0.398 7.14 0.281 2.49 0.098 2.25 N P
LTR030F 07 N P
LTL032F 01 0.81 0.032 98.86 0.875 90 12.70 0.500 25.40 1.000 7.32 0.288 4.57 0.180 3.68 0.145 3.25 M N
LTR032F 01 M N
LTL032F 07 98.86 0.875 90 12.70 0.500 25.40 1.000 10.21 0.402 7.14 0.281 2.64 0.104 2.25 N P
LTR032F 07 N P
LTL035G 01 0.89 0.035 120.89 1.070 90 15.88 0.625 31.75 1.250 8.03 0.316 4.75 0.187 3.89 0.153 3.25 M N
LTR035G 01 M N
LTL035G 07 120.89 1.070 90 15.88 0.625 31.75 1.250 11.89 0.468 8.74 0.344 2.90 0.114 2.25 Q R
LTR035G 07 Q R
LTL038G 01 0.97 0.038 144.62 1.280 90 15.88 0.625 31.75 1.250 9.80 0.386 6.35 0.250 4.32 0.170 3.25 N P
LTR038G 01 N P
LTL038G 07 144.62 1.280 90 15.88 0.625 31.75 1.250 13.74 0.541 10.31 0.406 3.15 0.124 2.25 S T
LTR038G 07 S T
LTML100J 01 1.00 0.039 136.12 1.205 61 17.50 0.689 35.00 1.378 7.00 0.276 4.00 0.157 5.00 0.197 4.25 L M
LTMR100J 01 L M
LTML100J 07 136.12 1.205 32 17.50 0.689 35.00 1.378 7.00 0.276 4.00 0.157 3.00 0.118 2.25 L M
LTMR100J 07 L M
LTML100N 01 136.12 1.205 81 17.50 0.689 35.00 1.378 9.00 0.354 6.00 0.236 5.00 0.197 4.25 N P
LTMR100N 01 N P
LTML100N 07 136.12 1.205 43 17.50 0.689 35.00 1.378 9.00 0.354 6.00 0.236 3.00 0.118 2.25 M N
LTMR100N 07 M N
LTML100T 01 136.12 1.205 132 17.50 0.689 35.00 1.378 14.00 0.551 10.00 0.394 5.00 0.197 4.25 U V
LTMR100T 01 U V
LTML100T 07 136.12 1.205 70 17.50 0.689 35.00 1.378 14.00 0.551 10.00 0.394 3.00 0.118 2.25 T U
LTMR100T 07 T U
174 Torque shown relates only to music wire. When using stainless steel, multiply by 0.933.
TORSION SPRINGS 90º
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL040H 01 1.02 0.040 169.48 1.500 90 15.88 0.625 31.75 1.250 8.51 0.335 5.38 0.212 5.59 0.220 4.25 M N
LTR040H 01 M N
LTL040H 07 169.48 1.500 90 12.70 0.500 25.40 1.000 10.29 0.405 7.14 0.281 4.32 0.170 3.25 N P
LTR040H 07 N P
LTL045H 01 1.14 0.045 242.92 2.150 90 15.88 0.625 31.75 1.250 9.04 0.356 5.72 0.225 6.22 0.245 4.25 N P
LTR045H 01 N P
LTL045H 07 242.92 2.150 90 15.88 0.625 31.75 1.250 11.51 0.453 7.92 0.312 4.85 0.191 3.25 Q R
LTR045H 07 Q R
LTL048J 01 1.22 0.048 310.71 2.750 90 15.88 0.625 31.75 1.250 9.86 0.388 5.84 0.230 6.60 0.260 4.25 N P
LTR048J 01 N P
LTL048J 07 310.71 2.750 90 15.88 0.625 31.75 1.250 11.68 0.460 7.92 0.312 5.18 0.204 3.25 Q R
LTR048J 07 Q R
LTML125M 01 1.25 0.049 255.09 2.258 57 20.00 0.787 40.00 1.575 8.50 0.335 5.00 0.197 6.25 0.246 4.25 N P
LTMR125M 01 N P
LTML125M 07 255.09 2.258 30 20.00 0.787 40.00 1.575 8.50 0.335 5.00 0.197 3.76 0.148 2.25 M N
LTMR125M 07 M N
LTML125R 01 255.09 2.258 80 20.00 0.787 40.00 1.575 11.50 0.453 8.00 0.315 6.25 0.246 4.25 R S
LTMR125R 01 R S
LTML125R 07 255.09 2.258 42 20.00 0.787 40.00 1.575 11.50 0.453 8.00 0.315 3.76 0.148 2.25 R S
LTMR125R 07 R S
LTML125V 01 255.09 2.258 119 20.00 0.787 40.00 1.575 16.50 0.650 12.00 0.472 6.25 0.246 4.25 W Y
LTMR125V 01 W Y
LTML125V 07 255.09 2.258 63 20.00 0.787 40.00 1.575 16.50 0.650 12.00 0.472 3.76 0.148 2.25 V X
LTMR125V 07 V X
LTL051J 01 1.30 0.051 350.25 3.100 90 25.40 1.000 50.80 2.000 10.36 0.408 6.35 0.250 6.99 0.275 4.25 Q R
LTR051J 01 Q R
LTL051J 07 350.25 3.100 90 15.88 0.625 31.75 1.250 13.13 0.517 9.53 0.375 5.51 0.217 3.25 S T
LTR051J 07 S T
LTL054K 01 1.37 0.054 395.45 3.500 90 25.40 1.000 50.80 2.000 12.29 0.484 8.00 0.315 7.49 0.295 4.25 R R
LTR054K 01 R R
LTL054K 07 395.45 3.500 90 15.88 0.625 31.75 1.250 14.55 0.573 10.31 0.406 5.84 0.230 3.25 T U
LTR054K 07 T U
LTL059K 01 1.50 0.059 508.43 4.500 90 25.40 1.000 50.80 2.000 12.67 0.499 7.92 0.312 8.13 0.320 4.25 S T
LTR059K 01 S T
LTL059K 07 508.43 4.500 90 25.40 1.000 50.80 2.000 16.10 0.634 11.91 0.469 6.38 0.251 3.25 U V
LTR059K 07 U V
LTML150P 01 425.51 3.767 53 22.50 0.886 45.00 1.772 10.00 0.394 6.00 0.236 7.49 0.295 4.25 P Q
LTMR150P 01 P Q
LTML150P 07 425.51 3.767 28 22.50 0.886 45.00 1.772 10.00 0.394 6.00 0.236 4.50 0.177 2.25 P Q
LTMR150P 07 P Q
LTML150U 01 425.51 3.767 85 22.50 0.886 45.00 1.772 15.00 0.591 10.00 0.394 7.49 0.295 4.25 V W
LTMR150U 01 V W
LTML150U 07 425.51 3.767 45 22.50 0.886 45.00 1.772 15.00 0.591 10.00 0.394 4.50 0.177 2.25 U V
LTMR150U 07 U V
LTML150X 01 425.51 3.767 116 22.50 0.886 45.00 1.772 20.00 0.787 15.00 0.591 7.49 0.295 4.25 X Z
LTMR150X 01 X Z
LTML150X 07 425.51 3.767 62 22.50 0.886 45.00 1.772 20.00 0.787 15.00 0.591 4.50 0.177 2.25 X Z
LTMR150X 07 X Z
LTL063L 01 1.60 0.063 621.42 5.500 90 25.40 1.000 50.80 2.000 14.22 0.560 9.53 0.375 8.89 0.350 4.25 T V
LTR063L 01 T V
LTL063L 07 621.42 5.500 90 25.40 1.000 50.80 2.000 17.15 0.675 11.91 0.469 6.81 0.268 3.25 W X
LTR063L 07 W X
LTL070M 01 1.78 0.070 847.39 7.500 90 25.40 1.000 50.80 2.000 15.06 0.593 9.78 0.385 9.53 0.375 4.25 V X
LTR070M 01 V X
LTL070M 07 847.39 7.500 90 25.40 1.000 50.80 2.000 19.15 0.754 13.49 0.531 7.57 0.298 3.25 X Z
LTR070M 07 X Z
LTL075M 01 1.91 0.075 1039.80 9.203 90 25.40 1.000 50.80 2.000 16.18 0.637 9.91 0.390 10.21 0.402 4.25 X Z
LTR075M 01 X Z
LTL075M 07 1039.80 9.203 90 25.40 1.000 50.80 2.000 20.57 0.810 15.09 0.594 8.10 0.319 3.25 Z BB
LTR075M 07 Z BB
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 175
90º TORSION SPRINGS
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL078N 01 1.98 0.078
1180.69 10.450 90 25.40 1.000 50.80 2.000 16.69 0.657 10.21 0.402 10.62 0.418 4.25 Z BB
LTR078N 01 Z BB
LTL078N 07 1180.69 10.450 90 25.40 1.000 50.80 2.000 21.21 0.835 15.09 0.594 8.43 0.332 3.25 BB DD
LTR078N 07 BB DD
LTML200S 01 2.00 0.079 978.56 8.663 50 30.00 1.181 60.00 2.362 13.00 0.512 8.00 0.315 10.01 0.394 4.25 T U
LTMR200S 01 T U
LTML200S 07 978.56 8.663 27 30.00 1.181 60.00 2.362 13.00 0.512 8.00 0.315 5.99 0.236 2.25 T U
LTMR200S 07 T U
LTML200W 01 978.56 8.663 73 30.00 1.181 60.00 2.362 18.00 0.709 12.00 0.472 10.01 0.394 4.25 X Z
LTMR200W 01 X Z
LTML200W 07 978.56 8.663 39 30.00 1.181 60.00 2.362 18.00 0.709 12.00 0.472 5.99 0.236 2.25 X Z
LTMR200W 07 X Z
LTML200Y 01 978.56 8.663 114 30.00 1.181 60.00 2.362 27.00 1.063 20.00 0.787 10.01 0.394 4.25 Z BA
LTMR200Y 01 Z BA
LTML200Y 07 978.56 8.663 60 30.00 1.181 60.00 2.362 27.00 1.063 20.00 0.787 5.99 0.236 2.25 Y BA
LTMR200Y 07 Y BA
LTL085N 01 2.16 0.085 1453.10 12.861 90 31.75 1.250 63.50 2.500 19.00 0.748 11.86 0.467 11.56 0.455 4.25 BB BD
LTR085N 01 BB BD
LTL085N 07 1452.98 12.860 90 31.75 1.250 63.50 2.500 24.18 0.952 17.48 0.688 9.17 0.361 3.25 BD BF
LTR085N 07 BD BF
LTL095P 01 2.41 0.095 1937.46 17.148 90 38.10 1.500 76.20 3.000 22.12 0.871 14.07 0.554 12.93 0.509 4.25 BD BF
LTR095P 01 BD BF
LTL095P 07 1936.56 17.140 90 38.10 1.500 76.20 3.000 28.19 1.110 20.62 0.812 10.26 0.404 3.25 BF BH
LTR095P 07 BF BH
LTL105Q 01 2.67 0.105 2372.68 21.000 90 44.45 1.750 88.90 3.500 21.54 0.848 12.70 0.500 16.67 0.656 5.25 BE BG
LTR105Q 01 BE BG
LTL105Q 07 2372.68 21.000 90 44.45 1.750 88.90 3.500 34.09 1.342 26.19 1.031 11.33 0.446 3.25 BF BH
LTR105Q 07 BF BH
LTL115R 01 2.92 0.115 3163.58 28.000 90 50.80 2.000 101.60 4.000 24.84 0.978 15.09 0.594 18.25 0.719 5.25 BF BH
LTR115R 01 BF BH
LTL115R 07 3163.58 28.000 90 50.80 2.000 101.60 4.000 36.83 1.450 27.79 1.094 12.42 0.489 3.25 BG BJ
LTR115R 07 BG BJ
LTL125S 01 3.18 0.125 3615.51 32.000 90 50.80 2.000 101.60 4.000 25.12 0.989 15.01 0.591 23.02 0.906 6.25 BG BJ
LTR125S 01 BG BJ
LTL125S 07 3615.51 32.000 90 50.80 2.000 101.60 4.000 34.85 1.372 26.19 1.031 16.66 0.656 4.25 BH BK
LTR125S 07 BH BK
LTL135T 01 3.43 0.135 4519.39 40.000 90 50.80 2.000 101.60 4.000 27.99 1.102 16.92 0.666 24.84 0.978 6.25 BJ BL
LTR135T 01 BJ BL
LTL135T 07 4519.39 40.000 90 50.80 2.000 101.60 4.000 37.90 1.492 28.58 1.125 18.01 0.709 4.25 BK BM
LTR135T 07 BK BM
176 Torque shown relates only to music wire. When using stainless steel, multiply by 0.933.
TORSION SPRINGS 180º
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL012A 02 0.30 0.012 5.65 0.050 180 4.76 0.188 9.53 0.375 2.79 0.110 1.70 0.067 2.18 0.086 6.00 L M
LTR012A 02 L M
LTL012A 04 5.65 0.050 180 6.35 0.250 12.70 0.500 4.24 0.167 2.77 0.109 1.50 0.059 4.00 L M
LTR012A 04 L M
LTL014A 02 0.36 0.014 8.47 0.075 180 6.35 0.250 12.70 0.500 3.38 0.133 1.57 0.062 2.62 0.103 6.00 L M
LTR014A 02 L M
LTL014A 04 8.47 0.075 180 9.53 0.375 19.05 0.750 4.93 0.194 2.77 0.109 1.91 0.075 4.00 L M
LTR014A 04 L M
LTL015B 02 0.38 0.015 11.30 0.100 180 6.35 0.250 12.70 0.500 3.33 0.131 1.98 0.078 2.72 0.107 6.00 L M
LTR015B 02 L M
LTL015B 04 11.30 0.100 180 9.53 0.375 19.05 0.750 4.67 0.184 2.77 0.109 1.91 0.075 4.00 L M
LTR015B 04 L M
LTML040A 02 0.40 0.016 9.97 0.088 192 8.00 0.315 16.00 0.630 2.80 0.110 1.50 0.059 5.21 0.205 12.00 L M
LTMR040A 02 L M
LTML040A 04 9.97 0.088 48 8.00 0.315 16.00 0.630 2.80 0.110 1.50 0.059 1.60 0.063 3.00 L M
LTMR040A 04 L M
LTML040C 02 9.97 0.088 272 8.00 0.315 16.00 0.630 3.80 0.150 2.50 0.098 5.21 0.205 12.00 L M
LTMR040C 02 L M
LTML040C 04 9.97 0.088 68 8.00 0.315 16.00 0.630 3.80 0.150 2.50 0.098 1.60 0.063 3.00 L M
LTMR040C 04 L M
LTML040G 02 9.97 0.088 432 8.00 0.315 16.00 0.630 5.80 0.228 4.00 0.157 5.21 0.205 12.00 L M
LTMR040G 02 L M
LTML040G 04 9.97 0.088 108 8.00 0.315 16.00 0.630 5.80 0.228 4.00 0.157 1.60 0.063 3.00 L M
LTMR040G 04 L M
LTL017C 02 0.43 0.017 14.12 0.125 180 6.35 0.250 12.70 0.500 4.37 0.172 2.67 0.105 3.18 0.125 6.00 L M
LTR017C 02 L M
LTL017C 04 14.12 0.125 180 9.53 0.375 19.05 0.750 6.32 0.249 4.32 0.170 2.29 0.090 4.00 L M
LTR017C 04 L M
LTL018C 02 0.46 0.018 16.95 0.150 180 6.35 0.250 12.70 0.500 4.19 0.165 2.77 0.109 3.81 0.150 7.00 L M
LTR018C 02 L M
LTL018C 04 16.95 0.150 180 9.53 0.375 19.05 0.750 5.51 0.217 3.56 0.140 2.77 0.109 5.00 L M
LTR018C 04 L M
LTML050B 02 0.50 0.020 17.90 0.159 181 10.00 0.394 20.00 0.787 3.50 0.138 2.00 0.079 6.50 0.256 12.00 L M
LTMR050B 02 L M
LTML050B 04 17.90 0.159 45 10.00 0.394 20.00 0.787 3.50 0.138 2.00 0.079 2.01 0.079 3.00 L M
LTMR050B 04 L M
LTML050E 02 17.90 0.159 242 10.00 0.394 20.00 0.787 4.50 0.177 3.00 0.118 6.50 0.256 12.00 L M
LTMR050E 02 L M
LTML050E 04 17.90 0.159 60 10.00 0.394 20.00 0.787 4.50 0.177 3.00 0.118 2.01 0.079 3.00 L M
LTMR050E 04 L M
LTML050J 02 17.90 0.159 391 10.00 0.394 20.00 0.787 7.00 0.276 5.00 0.197 6.50 0.256 12.00 M N
LTMR050J 02 M N
LTML050J 04 17.90 0.159 98 10.00 0.394 20.00 0.787 7.00 0.276 5.00 0.197 2.01 0.079 3.00 M N
LTMR050J 04 M N
LTL020D 02 0.51 0.020 22.60 0.200 180 9.53 0.375 19.05 0.750 4.55 0.179 2.67 0.105 4.19 0.165 7.00 L M
LTR020D 02 L M
LTL020D 04 22.60 0.200 180 12.70 0.500 25.40 1.000 6.15 0.242 4.06 0.160 3.18 0.125 5.00 L M
LTR020D 04 L M
LTL021D 02 0.53 0.021 28.25 0.250 180 9.53 0.375 19.05 0.750 4.72 0.186 2.77 0.109 4.39 0.173 7.00 L M
LTR021D 02 L M
LTL021D 04 28.25 0.250 180 12.70 0.500 25.40 1.000 6.30 0.248 3.96 0.156 3.23 0.127 5.00 L M
LTR021D 04 L M
LTL023D 02 0.58 0.023 37.28 0.330 180 9.53 0.375 19.05 0.750 4.85 0.191 2.92 0.115 4.83 0.190 7.00 L K
LTR023D 02 L K
LTL023D 04 37.28 0.330 180 12.70 0.500 25.40 1.000 6.58 0.259 4.32 0.170 3.68 0.145 5.00 L M
LTR023D 04 L M
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 177
180º TORSION SPRINGS
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTML060D 02 0.60 0.024 31.94 0.283 179 11.00 0.433 22.00 0.866 4.20 0.165 2.50 0.098 7.80 0.307 12.00 L M
LTMR060D 02 L M
LTML060D 04 31.94 0.283 45 11.00 0.433 22.00 0.866 4.20 0.165 2.50 0.098 2.39 0.094 3.00 L M
LTMR060D 04 L M
LTML060H 02 31.94 0.283 278 11.00 0.433 22.00 0.866 6.20 0.244 4.00 0.157 7.80 0.307 12.00 M N
LTMR060H 02 M N
LTML060H 04 31.94 0.283 70 11.00 0.433 22.00 0.866 6.20 0.244 4.00 0.157 2.39 0.094 3.00 L M
LTMR060H 04 L M
LTML060L 02 31.94 0.283 378 11.00 0.433 22.00 0.866 8.20 0.323 6.00 0.236 7.80 0.307 12.00 N P
LTMR060L 02 N P
LTML060L 04 31.94 0.283 94 11.00 0.433 22.00 0.866 8.20 0.323 6.00 0.236 2.39 0.094 3.00 N M
LTMR060L 04 N M
LTL025E 02 0.64 0.025 47.45 0.420 180 9.53 0.375 19.05 0.750 5.72 0.225 3.56 0.140 5.23 0.206 7.00 L M
LTR025E 02 L M
LTL025E 04 47.45 0.420 180 12.70 0.500 25.40 1.000 7.75 0.305 5.16 0.203 3.84 0.151 5.00 L M
LTR025E 04 L M
LTL028E 02 0.71 0.028 62.14 0.550 180 12.70 0.500 25.40 1.000 6.32 0.249 3.96 0.156 5.97 0.235 7.00 M N
LTR028E 02 M N
LTL028E 04 62.14 0.550 180 12.70 0.500 25.40 1.000 8.64 0.340 5.97 0.235 4.45 0.175 5.00 M P
LTR028E 04 M P
LTML075F 02 0.75 0.030 58.84 0.521 167 12.50 0.492 25.00 0.984 5.00 0.197 3.00 0.118 9.75 0.384 12.00 M N
LTMR075F 02 M N
LTML075F 04 58.84 0.521 42 12.50 0.492 25.00 0.984 5.00 0.197 3.00 0.118 3.00 0.118 3.00 L M
LTMR075F 04 L M
LTML075K 02 58.84 0.521 265 12.50 0.492 25.00 0.984 7.50 0.295 5.00 0.197 9.75 0.384 12.00 N P
LTMR075K 02 N P
LTML075K 04 58.84 0.521 66 12.50 0.492 25.00 0.984 7.50 0.295 5.00 0.197 3.00 0.118 3.00 N M
LTMR075K 04 N M
LTML075Q 02 58.84 0.521 382 12.50 0.492 25.00 0.984 10.50 0.413 8.00 0.315 9.75 0.384 12.00 P Q
LTMR075Q 02 P Q
LTML075Q 04 58.84 0.521 96 12.50 0.492 25.00 0.984 10.50 0.413 8.00 0.315 3.00 0.118 3.00 P Q
LTMR075Q 04 P Q
LTL030F 02 0.76 0.030 76.83 0.680 180 12.70 0.500 25.40 1.000 6.93 0.273 4.37 0.172 6.30 0.248 7.00 M N
LTR030F 02 M N
LTL030F 04 76.83 0.680 180 12.70 0.500 25.40 1.000 10.03 0.395 6.35 0.250 4.60 0.181 5.00 M P
LTR030F 04 M P
LTL032F 02 0.81 0.032 98.86 0.875 180 12.70 0.500 25.40 1.000 6.86 0.270 4.32 0.170 6.73 0.265 7.00 M N
LTR032F 02 M N
LTL032F 04 98.86 0.875 180 12.70 0.500 25.40 1.000 9.30 0.366 6.35 0.250 5.08 0.200 5.00 M P
LTR032F 04 M P
LTL035G 02 0.89 0.035 120.89 1.070 180 15.88 0.625 31.75 1.250 7.72 0.304 4.75 0.187 7.37 0.290 7.00 M N
LTR035G 02 M N
LTL035G 04 120.89 1.070 180 15.88 0.625 31.75 1.250 11.46 0.451 7.14 0.281 5.38 0.212 5.00 M P
LTR035G 04 M P
LTL038G 02 0.97 0.038 144.62 1.280 180 15.88 0.625 31.75 1.250 9.22 0.363 6.10 0.240 8.00 0.315 7.00 N P
LTR038G 02 N P
LTL038G 04 144.62 1.280 180 15.88 0.625 31.75 1.250 12.37 0.487 8.64 0.340 6.05 0.238 5.00 N P
LTR038G 04 N P
LTML100J 02 1.00 0.039 136.12 1.205 172 17.50 0.689 35.00 1.378 7.00 0.276 4.00 0.157 13.00 0.512 12.00 N P
LTMR100J 02 N P
LTML100J 04 136.12 1.205 43 17.50 0.689 35.00 1.378 7.00 0.276 4.00 0.157 3.99 0.157 3.00 N M
LTMR100J 04 N M
LTML100N 02 136.12 1.205 229 17.50 0.689 35.00 1.378 9.00 0.354 6.00 0.236 13.00 0.512 12.00 M P
LTMR100N 02 M P
LTML100N 04 136.12 1.205 57 17.50 0.689 35.00 1.378 9.00 0.354 6.00 0.236 3.99 0.157 3.00 M N
LTMR100N 04 M N
LTML100T 02 136.12 1.205 372 17.50 0.689 35.00 1.378 14.00 0.551 10.00 0.394 13.00 0.512 12.00 S T
LTMR100T 02 S T
LTML100T 04 136.12 1.205 93 17.50 0.689 35.00 1.378 14.00 0.551 10.00 0.394 3.99 0.157 3.00 R S
LTMR100T 04 R S
178 Torque shown relates only to music wire. When using stainless steel, multiply by 0.933.
TORSION SPRINGS 180º
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL040H 02 1.02 0.040 169.48 1.500 180 15.88 0.625 31.75 1.250 8.86 0.349 5.54 0.218 9.50 0.374 8.00 N S
LTR040H 02 N S
LTL040H 04 169.48 1.500 180 25.40 1.000 50.80 2.000 13.18 0.519 8.71 0.343 6.15 0.242 5.00 N P
LTR040H 04 N P
LTL045H 02 1.14 0.045 242.92 2.150 180 15.88 0.625 31.75 1.250 9.58 0.377 6.10 0.240 10.54 0.415 8.00 N P
LTR045H 02 N P
LTL045H 04 242.92 2.150 180 25.40 1.000 50.80 2.000 14.61 0.575 9.91 0.390 7.11 0.280 5.00 N P
LTR045H 04 N P
LTL048J 02 1.22 0.048 310.71 2.750 180 15.88 0.625 31.75 1.250 10.29 0.405 6.35 0.250 11.43 0.450 8.00 N P
LTR048J 02 N P
LTL048J 04 310.71 2.750 180 25.40 1.000 50.80 2.000 15.72 0.619 10.31 0.406 7.42 0.292 5.00 Q R
LTR048J 04 Q R
LTML125M 02 1.25 0.049 255.09 2.258 160 20.00 0.787 40.00 1.575 8.50 0.335 5.00 0.197 16.26 0.640 12.00 N P
LTMR125M 02 N P
LTML125M 04 255.09 2.258 40 20.00 0.787 40.00 1.575 8.50 0.335 5.00 0.197 5.00 0.197 3.00 N M
LTMR125M 04 N M
LTML125R 02 255.09 2.258 226 20.00 0.787 40.00 1.575 11.50 0.453 8.00 0.315 16.26 0.640 12.00 R S
LTMR125R 02 R S
LTML125R 04 255.09 2.258 57 20.00 0.787 40.00 1.575 11.50 0.453 8.00 0.315 5.00 0.197 3.00 P R
LTMR125R 04 P R
LTML125V 02 255.09 2.258 337 20.00 0.787 40.00 1.575 16.50 0.650 12.00 0.472 16.26 0.640 12.00 W X
LTMR125V 02 W X
LTML125V 04 255.09 2.258 84 20.00 0.787 40.00 1.575 16.50 0.650 12.00 0.472 5.00 0.197 3.00 R S
LTMR125V 04 R S
LTL051J 02 1.30 0.051 350.25 3.100 180 25.40 1.000 50.80 2.000 10.92 0.430 6.99 0.275 11.94 0.470 8.00 Q R
LTR051J 02 Q R
LTL051J 04 350.25 3.100 180 25.40 1.000 50.80 2.000 14.12 0.556 9.53 0.375 9.27 0.365 6.00 Q R
LTR051J 04 Q R
LTL054K 02 1.37 0.054 395.45 3.500 180 25.40 1.000 50.80 2.000 12.93 0.509 8.76 0.345 12.70 0.500 8.00 R R
LTR054K 02 R R
LTL054K 04 395.45 3.500 180 25.40 1.000 50.80 2.000 16.61 0.654 11.68 0.460 9.91 0.390 6.00 R T
LTR054K 04 R T
LTL059K 02 1.50 0.059 508.43 4.500 180 25.40 1.000 50.80 2.000 13.36 0.526 8.51 0.335 13.72 0.540 8.00 S T
LTR059K 02 S T
LTL059K 04 508.43 4.500 180 25.40 1.000 50.80 2.000 17.30 0.681 11.94 0.470 10.80 0.425 6.00 T V
LTR059K 04 T V
LTML150P 02 425.51 3.767 151 22.50 0.886 45.00 1.772 10.00 0.394 6.00 0.236 19.51 0.768 12.00 P Q
LTMR150P 02 P Q
LTML150P 04 425.51 3.767 38 22.50 0.886 45.00 1.772 10.00 0.394 6.00 0.236 5.99 0.236 3.00 P Q
LTMR150P 04 P Q
LTML150U 02 425.51 3.767 239 22.50 0.886 45.00 1.772 15.00 0.591 10.00 0.394 19.51 0.768 12.00 U V
LTMR150U 02 U V
LTML150U 04 425.51 3.767 60 22.50 0.886 45.00 1.772 15.00 0.591 10.00 0.394 5.99 0.236 3.00 R S
LTMR150U 04 R S
LTML150X 02 425.51 3.767 328 22.50 0.886 45.00 1.772 20.00 0.787 15.00 0.591 19.51 0.768 12.00 Y BA
LTMR150X 02 Y BA
LTML150X 04 425.51 3.767 82 22.50 0.886 45.00 1.772 20.00 0.787 15.00 0.591 5.99 0.236 3.00 V X
LTMR150X 04 V X
LTL063L 02 1.60 0.063 621.42 5.500 180 25.40 1.000 50.80 2.000 15.01 0.591 9.91 0.390 14.73 0.580 8.00 T V
LTR063L 02 T V
LTL063L 04 621.42 5.500 180 25.40 1.000 50.80 2.000 19.48 0.767 13.89 0.547 11.68 0.460 6.00 V X
LTR063L 04 V X
LTL070M 02 1.78 0.070 847.39 7.500 180 25.40 1.000 50.80 2.000 15.88 0.625 10.31 0.406 16.26 0.640 8.00 V X
LTR070M 02 V X
LTL070M 04 847.39 7.500 180 25.40 1.000 50.80 2.000 20.57 0.810 14.35 0.565 12.70 0.500 6.00 X Z
LTR070M 04 X Z
LTL075M 02 1.91 0.075 1039.80 9.203 180 25.40 1.000 50.80 2.000 17.07 0.672 10.62 0.418 17.50 0.689 8.00 X Z
LTR075M 02 X Z
LTL075M 04 1039.80 9.203 180 25.40 1.000 50.80 2.000 19.23 0.757 12.34 0.486 15.54 0.612 7.00 Z BB
LTR075M 04 Z BB
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 179
180º TORSION SPRINGS
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL078N 02 1.98 0.078
1180.69 10.450 180 25.40 1.000 50.80 2.000 17.60 0.693 10.95 0.431 18.19 0.716 8.00 Z BB
LTR078N 02 Z BB
LTL078N 04 1180.69 10.450 180 25.40 1.000 50.80 2.000 19.84 0.781 12.70 0.500 16.18 0.637 7.00 BB BD
LTR078N 04 BB BD
LTML200S 02 2.00 0.079 978.56 8.663 142 30.00 1.181 60.00 2.362 13.00 0.512 8.00 0.315 26.01 1.024 12.00 R S
LTMR200S 02 R S
LTML200S 04 978.56 8.663 35 30.00 1.181 60.00 2.362 13.00 0.512 8.00 0.315 8.00 0.315 3.00 P Q
LTMR200S 04 P Q
LTML200W 02 978.56 8.663 206 30.00 1.181 60.00 2.362 18.00 0.709 12.00 0.472 26.01 1.024 12.00 X Z
LTMR200W 02 X Z
LTML200W 04 978.56 8.663 52 30.00 1.181 60.00 2.362 18.00 0.709 12.00 0.472 8.00 0.315 3.00 V X
LTMR200W 04 V X
LTML200Y 02 978.56 8.663 323 30.00 1.181 60.00 2.362 27.00 1.063 20.00 0.787 26.01 1.024 12.00 Z BB
LTMR200Y 02 Z BB
LTML200Y 04 978.56 8.663 81 30.00 1.181 60.00 2.362 27.00 1.063 20.00 0.787 8.00 0.315 3.00 Y BA
LTMR200Y 04 Y BA
LTL085N 02 2.16 0.085 1453.10 12.861 180 31.75 1.250 63.50 2.500 20.07 0.790 12.70 0.500 19.81 0.780 8.00 BB BD
LTR085N 02 BB BD
LTL085N 04 1453.10 12.861 180 31.75 1.250 63.50 2.500 22.63 0.891 14.73 0.580 17.63 0.694 7.00 BD BF
LTR085N 04 BD BF
LTL095P 02 2.41 0.095 1937.46 17.148 180 38.10 1.500 76.20 3.000 23.37 0.920 15.06 0.593 22.15 0.872 8.00 BD BF
LTR095P 02 BD BF
LTL095P 04 1937.46 17.148 180 38.10 1.500 76.20 3.000 26.37 1.038 17.42 0.686 19.69 0.775 7.00 BF BH
LTR095P 04 BF BH
LTL105Q 02 2.67 0.105 2372.68 21.000 180 44.45 1.750 88.90 3.500 24.94 0.982 15.47 0.609 26.67 1.050 9.00 BE BG
LTR105Q 02 BE BG
LTL105Q 04 2372.68 21.000 180 44.45 1.750 88.90 3.500 31.70 1.248 20.65 0.813 21.34 0.840 7.00 BF BH
LTR105Q 04 BF BH
LTL115R 02 2.92 0.115 3163.58 28.000 180 50.80 2.000 101.60 4.000 26.49 1.043 16.28 0.641 29.21 1.150 9.00 BF BH
LTR115R 02 BF BH
LTL115R 04 3163.58 28.000 180 50.80 2.000 101.60 4.000 34.24 1.348 21.82 0.859 23.37 0.920 7.00 BG BJ
LTR115R 04 BG BJ
LTL125S 02 3.18 0.125 3615.51 32.000 180 50.80 2.000 101.60 4.000 27.48 1.082 16.92 0.666 38.10 1.500 11.00 BG BJ
LTR125S 02 BG BJ
LTL125S 04 3615.51 32.000 180 50.80 2.000 101.60 4.000 34.44 1.356 22.48 0.885 28.58 1.125 8.00 BH BK
LTR125S 04 BH BK
LTL135T 02 3.43 0.135 4519.39 40.000 180 50.80 2.000 101.60 4.000 30.20 1.189 18.67 0.735 41.15 1.620 11.00 BJ BL
LTR135T 02 BJ BL
LTL135T 04 4519.39 40.000 180 50.80 2.000 101.60 4.000 37.87 1.491 24.82 0.977 30.86 1.215 8.00 BK BM
LTR135T 04 BK BM
180 Torque shown relates only to music wire. When using stainless steel, multiply by 0.933.
TORSION SPRINGS 270º
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL012A 03 0.30 0.012 5.65 0.050 270 4.76 0.188 9.53 0.375 2.62 0.103 1.57 0.062 3.53 0.139 9.75 L M
LTR012A 03 L M
LTL012A 05 5.65 0.050 270 6.35 0.250 12.70 0.500 4.34 0.171 2.77 0.109 2.18 0.086 5.75 L M
LTR012A 05 L M
LTL014A 03 0.36 0.014 8.47 0.075 270 6.35 0.250 12.70 0.500 3.15 0.124 1.57 0.062 3.96 0.156 9.75 L M
LTR014A 03 L M
LTL014A 05 8.47 0.075 270 9.53 0.375 19.05 0.750 5.11 0.201 2.77 0.109 2.54 0.100 5.75 L M
LTR014A 05 L M
LTL015B 03 0.38 0.015 11.30 0.100 270 6.35 0.250 12.70 0.500 3.18 0.125 1.98 0.078 4.39 0.173 9.75 L M
LTR015B 03 L M
LTL015B 05 11.30 0.100 270 9.53 0.375 19.05 0.750 5.08 0.200 2.77 0.109 2.72 0.107 5.75 L M
LTR015B 05 L M
LTML040A 03 0.40 0.016 9.97 0.088 140 8.00 0.315 16.00 0.630 2.80 0.110 1.50 0.059 3.99 0.157 8.75 L M
LTMR040A 03 L M
LTML040A 05 9.97 0.088 44 8.00 0.315 16.00 0.630 2.80 0.110 1.50 0.059 1.60 0.063 2.75 L M
LTMR040A 05 L M
LTML040C 03 9.97 0.088 198 8.00 0.315 16.00 0.630 3.80 0.150 2.50 0.098 3.99 0.157 8.75 L M
LTMR040C 03 L M
LTML040C 05 9.97 0.088 62 8.00 0.315 16.00 0.630 3.80 0.150 2.50 0.098 1.60 0.063 2.75 L M
LTMR040C 05 L M
LTML040G 03 9.97 0.088 315 8.00 0.315 16.00 0.630 5.80 0.228 4.00 0.157 3.99 0.157 8.75 L M
LTMR040G 03 L M
LTML040G 05 9.97 0.088 99 8.00 0.315 16.00 0.630 5.80 0.228 4.00 0.157 1.60 0.063 2.75 L M
LTMR040G 05 L M
LTL017C 03 0.43 0.017 14.12 0.125 270 6.35 0.250 12.70 0.500 4.06 0.160 2.36 0.093 4.78 0.188 9.75 L M
LTR017C 03 L M
LTL017C 05 14.12 0.125 270 9.53 0.375 19.05 0.750 6.58 0.259 4.45 0.175 3.05 0.120 5.75 L M
LTR017C 05 L M
LTL018C 03 0.46 0.018 16.95 0.150 270 6.35 0.250 12.70 0.500 4.06 0.160 2.77 0.109 5.79 0.228 10.75 L M
LTR018C 03 L M
LTL018C 05 16.95 0.150 270 9.53 0.375 19.05 0.750 6.25 0.246 3.96 0.156 3.81 0.150 6.75 L M
LTR018C 05 L M
LTML050B 03 0.50 0.020 17.90 0.159 132 10.00 0.394 20.00 0.787 3.50 0.138 2.00 0.079 5.00 0.197 8.75 L M
LTMR050B 03 L M
LTML050B 05 17.90 0.159 42 10.00 0.394 20.00 0.787 3.50 0.138 2.00 0.079 2.01 0.079 2.75 L M
LTMR050B 05 L M
LTML050E 03 17.90 0.159 176 10.00 0.394 20.00 0.787 4.50 0.177 3.00 0.118 5.00 0.197 8.75 L M
LTMR050E 03 L M
LTML050E 05 17.90 0.159 55 10.00 0.394 20.00 0.787 4.50 0.177 3.00 0.118 2.01 0.079 2.75 L M
LTMR050E 05 L M
LTML050J 03 17.90 0.159 286 10.00 0.394 20.00 0.787 7.00 0.276 5.00 0.197 5.00 0.197 8.75 M P
LTMR050J 03 M P
LTML050J 05 17.90 0.159 90 10.00 0.394 20.00 0.787 7.00 0.276 5.00 0.197 2.01 0.079 2.75 M N
LTMR050J 05 M N
LTL020D 03 0.51 0.020 22.60 0.200 270 9.53 0.375 19.05 0.750 4.45 0.175 2.67 0.105 6.10 0.240 10.75 L M
LTR020D 03 L M
LTL020D 05 22.60 0.200 270 12.70 0.500 25.40 1.000 6.81 0.268 4.75 0.187 4.06 0.160 6.75 L M
LTR020D 05 L M
LTL021D 03 0.53 0.021 28.25 0.250 270 9.53 0.375 19.05 0.750 4.70 0.185 2.77 0.109 6.76 0.266 10.75 L M
LTR021D 03 L M
LTL021D 05 28.25 0.250 270 12.70 0.500 25.40 1.000 6.25 0.246 3.76 0.148 4.95 0.195 7.75 L M
LTR021D 05 L M
LTL023D 03 0.58 0.023 37.28 0.330 270 9.53 0.375 19.05 0.750 4.75 0.187 2.77 0.109 7.11 0.280 10.75 L M
LTR023D 03 L M
LTL023D 05 37.28 0.330 270 12.70 0.500 25.40 1.000 6.38 0.251 4.11 0.162 5.33 0.210 7.75 L M
LTR023D 05 L M
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 181
270º TORSION SPRINGS
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTML060D 03 0.60 0.024 31.94 0.283 130 11.00 0.433 22.00 0.866 4.20 0.165 2.50 0.098 5.99 0.236 8.75 L M
LTMR060D 03 L M
LTML060D 05 31.94 0.283 41 11.00 0.433 22.00 0.866 4.20 0.165 2.50 0.098 2.39 0.094 2.75 L M
LTMR060D 05 L M
LTML060H 03 31.94 0.283 203 11.00 0.433 22.00 0.866 6.20 0.244 4.00 0.157 5.99 0.236 8.75 L M
LTMR060H 03 L M
LTML060H 05 31.94 0.283 64 11.00 0.433 22.00 0.866 6.20 0.244 4.00 0.157 2.39 0.094 2.75 L M
LTMR060H 05 L M
LTML060L 03 31.94 0.283 275 11.00 0.433 22.00 0.866 8.20 0.323 6.00 0.236 5.99 0.236 8.75 N P
LTMR060L 03 N P
LTML060L 05 31.94 0.283 87 11.00 0.433 22.00 0.866 8.20 0.323 6.00 0.236 2.39 0.094 2.75 M N
LTMR060L 05 M N
LTL025E 03 0.64 0.025 47.45 0.420 270 9.53 0.375 19.05 0.750 5.59 0.220 3.56 0.140 7.72 0.304 10.75 L M
LTR025E 03 L M
LTL025E 05 47.45 0.420 270 12.70 0.500 25.40 1.000 8.66 0.341 5.54 0.218 5.23 0.206 6.75 L M
LTR025E 05 L M
LTL028E 03 0.71 0.028 62.14 0.550 270 12.70 0.500 25.40 1.000 6.22 0.245 3.96 0.156 8.64 0.340 10.75 M N
LTR028E 03 M N
LTL028E 05 62.14 0.550 270 12.70 0.500 25.40 1.000 8.36 0.329 5.72 0.225 6.48 0.255 7.75 M P
LTR028E 05 M P
LTML075F 03 0.75 0.030 58.84 0.521 121 12.50 0.492 25.00 0.984 5.00 0.197 3.00 0.118 7.49 0.295 8.75 L M
LTMR075F 03 L M
LTML075F 05 58.84 0.521 38 12.50 0.492 25.00 0.984 5.00 0.197 3.00 0.118 3.00 0.118 2.75 L M
LTMR075F 05 L M
LTML075K 03 58.84 0.521 193 12.50 0.492 25.00 0.984 7.50 0.295 5.00 0.197 7.49 0.295 8.75 N P
LTMR075K 03 N P
LTML075K 05 58.84 0.521 61 12.50 0.492 25.00 0.984 7.50 0.295 5.00 0.197 3.00 0.118 2.75 M N
LTMR075K 05 M N
LTML075Q 03 58.84 0.521 279 12.50 0.492 25.00 0.984 10.50 0.413 8.00 0.315 7.49 0.295 8.75 P Q
LTMR075Q 03 P Q
LTML075Q 05 58.84 0.521 88 12.50 0.492 25.00 0.984 10.50 0.413 8.00 0.315 3.00 0.118 2.75 P Q
LTMR075Q 05 P Q
LTL030F 03 0.76 0.030 76.83 0.680 270 12.70 0.500 25.40 1.000 6.88 0.271 4.37 0.172 9.27 0.365 10.75 M N
LTR030F 03 M N
LTL030F 05 76.83 0.680 270 12.70 0.500 25.40 1.000 9.58 0.377 6.35 0.250 7.11 0.280 7.75 M P
LTR030F 05 M P
LTL032F 03 0.81 0.032 98.86 0.875 270 12.70 0.500 25.40 1.000 6.71 0.264 4.11 0.162 9.78 0.385 10.75 M N
LTR032F 03 M N
LTL032F 05 98.86 0.875 270 12.70 0.500 25.40 1.000 8.99 0.354 6.10 0.240 7.37 0.290 7.75 M P
LTR032F 05 M P
LTL035G 03 0.89 0.035 120.89 1.070 270 15.88 0.625 31.75 1.250 7.92 0.312 4.75 0.187 10.80 0.425 10.75 M N
LTR035G 03 N P
LTL035G 05 120.89 1.070 270 15.88 0.625 31.75 1.250 11.07 0.436 7.14 0.281 8.00 0.315 7.75 M N
LTR035G 05 N P
LTL038G 03 0.97 0.038 144.62 1.280 270 15.88 0.625 31.75 1.250 9.02 0.355 5.84 0.230 11.56 0.455 10.75 N P
LTR038G 03 N P
LTL038G 05 144.62 1.280 270 15.88 0.625 31.75 1.250 12.12 0.477 8.38 0.330 8.69 0.342 7.75 N P
LTR038G 05 N P
LTML100J 03 1.00 0.039 136.12 1.205 125 17.50 0.689 35.00 1.378 7.00 0.276 4.00 0.157 10.01 0.394 8.75 M N
LTMR100J 03 M N
LTML100J 05 136.12 1.205 39 17.50 0.689 35.00 1.378 7.00 0.276 4.00 0.157 3.99 0.157 2.75 M N
LTMR100J 05 M N
LTML100N 03 136.12 1.205 167 17.50 0.689 35.00 1.378 9.00 0.354 6.00 0.236 10.01 0.394 8.75 M N
LTMR100N 03 M N
LTML100N 05 136.12 1.205 52 17.50 0.689 35.00 1.378 9.00 0.354 6.00 0.236 3.99 0.157 2.75 M N
LTMR100N 05 M N
LTML100T 03 136.12 1.205 271 17.50 0.689 35.00 1.378 14.00 0.551 10.00 0.394 10.01 0.394 8.75 R S
LTMR100T 03 R S
LTML100T 05 136.12 1.205 85 17.50 0.689 35.00 1.378 14.00 0.551 10.00 0.394 3.99 0.157 2.75 P Q
LTMR100T 05 P Q
182 Torque shown relates only to music wire. When using stainless steel, multiply by 0.933.
TORSION SPRINGS 270º
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL040H 03 1.02 0.040 169.48 1.500 270 15.88 0.625 31.75 1.250 9.12 0.359 5.54 0.218 13.34 0.525 11.75 S T
LTR040H 03 S T
LTL040H 05 169.48 1.500 270 25.40 1.000 50.80 2.000 13.00 0.512 8.71 0.343 9.14 0.360 7.75 N P
LTR040H 05 N P
LTL045H 03 1.14 0.045 242.92 2.150 270 15.88 0.625 31.75 1.250 9.70 0.382 6.10 0.240 14.86 0.585 11.75 N P
LTR045H 03 N P
LTL045H 05 242.92 2.150 270 25.40 1.000 50.80 2.000 14.12 0.556 9.53 0.375 10.29 0.405 7.75 N P
LTR045H 05 N P
LTL048J 03 1.22 0.048 310.71 2.750 270 15.88 0.625 31.75 1.250 10.59 0.417 6.35 0.250 16.00 0.630 11.75 Q R
LTR048J 03 Q R
LTL048J 05 310.71 2.750 270 25.40 1.000 50.80 2.000 15.27 0.601 10.31 0.406 11.05 0.435 7.75 Q R
LTR048J 05 Q R
LTML125M 03 1.25 0.049 255.09 2.258 117 20.00 0.787 40.00 1.575 8.50 0.335 5.00 0.197 12.50 0.492 8.75 N P
LTMR125M 03 N P
LTML125M 05 255.09 2.258 37 20.00 0.787 40.00 1.575 8.50 0.335 5.00 0.197 5.00 0.197 2.75 L M
LTMR125M 05 L M
LTML125R 03 255.09 2.258 165 20.00 0.787 40.00 1.575 11.50 0.453 8.00 0.315 12.50 0.492 8.75 P Q
LTMR125R 03 P Q
LTML125R 05 255.09 2.258 52 20.00 0.787 40.00 1.575 11.50 0.453 8.00 0.315 5.00 0.197 2.75 P R
LTMR125R 05 P R
LTML125V 03 255.09 2.258 245 20.00 0.787 40.00 1.575 16.50 0.650 12.00 0.472 12.50 0.492 8.75 S T
LTMR125V 03 S T
LTML125V 05 255.09 2.258 77 20.00 0.787 40.00 1.575 16.50 0.650 12.00 0.472 5.00 0.197 2.75 P Q
LTMR125V 05 P Q
LTL051J 03 1.30 0.051 350.25 3.100 270 25.40 1.000 50.80 2.000 11.15 0.439 7.11 0.280 16.76 0.660 11.75 Q R
LTR051J 03 Q R
LTL051J 05 350.25 3.100 270 25.40 1.000 50.80 2.000 14.50 0.571 9.91 0.390 12.95 0.510 8.75 Q R
LTR051J 05 Q R
LTL054K 03 1.37 0.054 395.45 3.500 270 25.40 1.000 50.80 2.000 13.06 0.514 8.76 0.345 17.78 0.700 11.75 R S
LTR054K 03 R S
LTL054K 05 395.45 3.500 270 25.40 1.000 50.80 2.000 16.87 0.664 12.07 0.475 13.72 0.540 8.75 R T
LTR054K 05 R T
LTL059K 03 1.50 0.059 508.43 4.500 270 25.40 1.000 50.80 2.000 13.64 0.537 8.89 0.350 19.43 0.765 11.75 T U
LTR059K 03 T U
LTL059K 05 508.43 4.500 270 25.40 1.000 50.80 2.000 17.75 0.699 12.32 0.485 14.86 0.585 8.75 T V
LTR059K 05 T V
LTML150P 03 425.51 3.767 110 22.50 0.886 45.00 1.772 10.00 0.394 6.00 0.236 15.01 0.591 8.75 P Q
LTMR150P 03 P Q
LTML150P 05 425.51 3.767 35 22.50 0.886 45.00 1.772 10.00 0.394 6.00 0.236 5.99 0.236 2.75 M N
LTMR150P 05 M N
LTML150U 03 425.51 3.767 175 22.50 0.886 45.00 1.772 15.00 0.591 10.00 0.394 15.01 0.591 8.75 R S
LTMR150U 03 R S
LTML150U 05 425.51 3.767 55 22.50 0.886 45.00 1.772 15.00 0.591 10.00 0.394 5.99 0.236 2.75 P Q
LTMR150U 05 P Q
LTML150X 03 425.51 3.767 239 22.50 0.886 45.00 1.772 20.00 0.787 15.00 0.591 15.01 0.591 8.75 V X
LTMR150X 03 V X
LTML150X 05 425.51 3.767 75 22.50 0.886 45.00 1.772 20.00 0.787 15.00 0.591 5.99 0.236 2.75 U W
LTMR150X 05 U W
LTL063L 03 1.60 0.063 621.42 5.500 270 25.40 1.000 50.80 2.000 15.24 0.600 10.31 0.406 20.83 0.820 11.75 T V
LTR063L 03 T V
LTL063L 05 621.42 5.500 270 25.40 1.000 50.80 2.000 19.91 0.784 14.27 0.562 16.00 0.630 8.75 V X
LTR063L 05 V X
LTL070M 03 1.78 0.070 847.39 7.500 270 25.40 1.000 50.80 2.000 16.23 0.639 10.67 0.420 20.45 0.805 11.75 V X
LTR070M 03 V X
LTL070M 05 847.39 7.500 270 25.40 1.000 50.80 2.000 20.98 0.826 14.73 0.580 20.07 0.790 8.75 X Z
LTR070M 05 X Z
LTL075M 03 1.91 0.075 1039.80 9.203 270 25.40 1.000 50.80 2.000 17.40 0.685 12.50 0.492 24.77 0.975 11.75 X Z
LTR075M 03 X Z
LTL075M 05 1039.80 9.203 270 25.40 1.000 50.80 2.000 20.57 0.810 13.39 0.527 20.88 0.822 9.75 Z BB
LTR075M 05 Z BB
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 183
270º TORSION SPRINGS
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL078N 03 1.98 0.078
1180.69 10.450 270 25.40 1.000 50.80 2.000 17.93 0.706 12.88 0.507 25.78 1.015 11.75 Z BB
LTR078N 03 Z BB
LTL078N 05 1180.69 10.450 270 25.40 1.000 50.80 2.000 21.21 0.835 13.79 0.543 21.72 0.855 9.75 BB BD
LTR078N 05 BB BD
LTML200S 03 2.00 0.079 978.56 8.663 103 30.00 1.181 60.00 2.362 13.00 0.512 8.00 0.315 19.99 0.787 8.75 Q R
LTMR200S 03 Q R
LTML200S 05 978.56 8.663 33 30.00 1.181 60.00 2.362 13.00 0.512 8.00 0.315 8.00 0.315 2.75 P Q
LTMR200S 05 P Q
LTML200W 03 978.56 8.663 151 30.00 1.181 60.00 2.362 18.00 0.709 12.00 0.472 19.99 0.787 8.75 V X
LTMR200W 03 V X
LTML200W 05 978.56 8.663 47 30.00 1.181 60.00 2.362 18.00 0.709 12.00 0.472 8.00 0.315 2.75 V X
LTMR200W 05 V X
LTML200Y 03 978.56 8.663 235 30.00 1.181 60.00 2.362 27.00 1.063 20.00 0.787 19.99 0.787 8.75 X Z
LTMR200Y 03 X Z
LTML200Y 05 978.56 8.663 74 30.00 1.181 60.00 2.362 27.00 1.063 20.00 0.787 8.00 0.315 2.75 W Y
LTMR200Y 05 W Y
LTL085N 03 2.16 0.085 1453.10 12.861 270 31.75 1.250 63.50 2.500 20.45 0.805 14.83 0.584 28.09 1.106 11.75 BB BD
LTR085N 03 BB BD
LTL085N 05 1453.10 12.861 270 31.75 1.250 63.50 2.500 24.18 0.952 15.95 0.628 23.67 0.932 9.75 BD BF
LTR085N 05 BD BF
LTL095P 03 2.41 0.095 1937.46 17.148 270 38.10 1.500 76.20 3.000 23.80 0.937 17.45 0.687 31.37 1.235 11.75 BD BF
LTR095P 03 BD BF
LTL095P 05 1937.46 17.148 270 38.10 1.500 76.20 3.000 28.19 1.110 18.87 0.743 26.47 1.042 9.75 BF BH
LTR095P 05 BF BH
LTL105Q 03 2.67 0.105 2372.68 21.000 270 44.45 1.750 88.90 3.500 27.69 1.090 17.86 0.703 34.01 1.339 11.75 BE BG
LTR105Q 03 BE BG
LTL105Q 05 2372.68 21.000 270 44.45 1.750 88.90 3.500 34.09 1.342 22.63 0.891 28.68 1.129 9.75 BF BH
LTR105Q 05 BF BH
LTL115R 03 2.92 0.115 3163.58 28.000 270 50.80 2.000 101.60 4.000 27.58 1.086 17.48 0.688 43.08 1.696 13.75 BF BH
LTR115R 03 BF BH
LTL115R 05 3163.58 28.000 270 50.80 2.000 101.60 4.000 36.45 1.435 23.83 0.938 31.40 1.236 9.75 BG BJ
LTR115R 05 BG BJ
LTL125S 03 3.18 0.125 3615.51 32.000 270 50.80 2.000 101.60 4.000 30.20 1.189 19.08 0.751 50.00 1.969 14.75 BG BJ
LTR125S 03 BG BJ
LTL125S 05 3615.51 32.000 270 50.80 2.000 101.60 4.000 38.51 1.516 25.73 1.013 40.48 1.594 11.75 BH BK
LTR125S 05 BH BK
LTL135T 03 3.43 0.135 4519.39 40.000 270 50.80 2.000 101.60 4.000 33.05 1.301 20.96 0.825 54.01 2.126 14.75 BJ BL
LTR135T 03 BJ BL
LTL135T 05 4519.39 40.000 270 50.80 2.000 101.60 4.000 42.16 1.660 28.24 1.112 43.72 1.721 11.75 BK BM
LTR135T 05 BK BM
184 Torque shown relates only to music wire. When using stainless steel, multiply by 0.933.
TORSION SPRINGS 360º
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL012A 06 0.30 0.012 5.65 0.050 360 6.35 0.250 12.70 0.500 4.42 0.174 2.77 0.109 2.84 0.112 7.50 L M
LTR012A 06 L M
LTL012A 08 5.65 0.050 360 9.53 0.375 19.05 0.750 5.61 0.221 3.96 0.156 1.98 0.078 5.50 L M
LTR012A 08 L M
LTL014A 06 0.36 0.014 8.47 0.075 360 9.53 0.375 19.05 0.750 5.18 0.204 2.77 0.109 3.15 0.124 7.50 L M
LTR014A 06 L M
LTL014A 08 8.47 0.075 360 9.53 0.375 19.05 0.750 6.93 0.273 4.78 0.188 2.31 0.091 5.50 L M
LTR014A 08 L M
LTL015B 06 0.38 0.015 11.30 0.100 360 9.53 0.375 19.05 0.750 5.28 0.208 2.77 0.109 3.35 0.132 7.50 L M
LTR015B 06 L M
LTL015B 08 11.30 0.100 360 12.70 0.500 25.40 1.000 6.88 0.271 4.78 0.188 2.49 0.098 5.50 L M
LTR015B 08 L M
LTML040A 06 0.40 0.016 9.97 0.088 104 8.00 0.315 16.00 0.630 2.80 0.110 1.50 0.059 2.79 0.110 6.50 L M
LTMR040A 06 L M
LTML040A 08 9.97 0.088 40 8.00 0.315 16.00 0.630 2.80 0.110 1.50 0.059 1.19 0.047 2.50 L M
LTMR040A 08 L M
LTML040C 06 9.97 0.088 147 8.00 0.315 16.00 0.630 3.80 0.150 2.50 0.098 2.79 0.110 6.50 L M
LTMR040C 06 L M
LTML040C 08 9.97 0.088 57 8.00 0.315 16.00 0.630 3.80 0.150 2.50 0.098 1.19 0.047 2.50 L M
LTMR040C 08 L M
LTML040G 06 9.97 0.088 234 8.00 0.315 16.00 0.630 5.80 0.228 4.00 0.157 2.79 0.110 6.50 L M
LTMR040G 06 L M
LTML040G 08 9.97 0.088 90 8.00 0.315 16.00 0.630 5.80 0.228 4.00 0.157 1.19 0.047 2.50 L M
LTMR040G 08 L M
LTL017C 06 0.43 0.017 14.12 0.125 360 9.53 0.375 19.05 0.750 5.97 0.235 3.96 0.156 4.24 0.167 8.50 L M
LTR017C 06 L M
LTL017C 08 14.12 0.125 360 12.70 0.500 25.40 1.000 7.70 0.303 5.56 0.219 3.25 0.128 6.50 L M
LTR017C 08 L M
LTL018C 06 0.46 0.018 16.95 0.150 360 9.53 0.375 19.05 0.750 5.94 0.234 3.96 0.156 5.08 0.200 9.50 L M
LTR018C 06 L M
LTL018C 08 16.95 0.150 360 12.70 0.500 25.40 1.000 9.42 0.371 6.76 0.266 2.97 0.117 5.50 M N
LTR018C 08 M N
LTML050B 06 0.50 0.020 17.90 0.159 98 10.00 0.394 20.00 0.787 3.50 0.138 2.00 0.079 3.51 0.138 6.50 L M
LTMR050B 06 L M
LTML050B 08 17.90 0.159 38 10.00 0.394 20.00 0.787 3.50 0.138 2.00 0.079 1.50 0.059 2.50 L M
LTMR050B 08 L M
LTML050E 06 17.90 0.159 131 10.00 0.394 20.00 0.787 4.50 0.177 3.00 0.118 3.51 0.138 6.50 L M
LTMR050E 06 L M
LTML050E 08 17.90 0.159 50 10.00 0.394 20.00 0.787 4.50 0.177 3.00 0.118 1.50 0.059 2.50 L M
LTMR050E 08 L M
LTML050J 06 17.90 0.159 213 10.00 0.394 20.00 0.787 7.00 0.276 5.00 0.197 3.51 0.138 6.50 M N
LTMR050J 06 M N
LTML050J 08 17.90 0.159 82 10.00 0.394 20.00 0.787 7.00 0.276 5.00 0.197 1.50 0.059 2.50 M N
LTMR050J 08 M N
LTL020D 06 0.51 0.020 22.60 0.200 360 12.70 0.500 25.40 1.000 6.45 0.254 4.37 0.172 5.46 0.215 9.50 L M
LTR020D 06 L M
LTL020D 08 22.60 0.200 360 15.88 0.625 31.75 1.250 10.77 0.424 7.92 0.312 3.30 0.130 5.50 M N
LTR020D 08 M N
LTL021D 06 0.53 0.021 28.25 0.250 360 12.70 0.500 25.40 1.000 6.91 0.272 4.75 0.187 5.84 0.230 9.50 L M
LTR021D 06 L M
LTL021D 08 28.25 0.250 360 12.70 0.500 25.40 1.000 10.52 0.414 7.54 0.297 3.45 0.136 5.50 L N
LTR021D 08 L N
LTL023D 06 0.58 0.023 37.28 0.330 360 12.70 0.500 25.40 1.000 6.88 0.271 4.57 0.180 6.35 0.250 9.50 L M
LTR023D 06 L M
LTL023D 08 37.28 0.330 360 15.88 0.625 31.75 1.250 11.46 0.451 8.33 0.328 3.81 0.150 5.50 M N
LTR023D 08 M N
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 185
360º TORSION SPRINGS
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTML060D 06 0.60 0.024 31.94 0.283 97 11.00 0.433 22.00 0.866 4.20 0.165 2.50 0.098 4.19 0.165 6.50 L M
LTMR060D 06 L M
LTML060D 08 31.94 0.283 37 11.00 0.433 22.00 0.866 4.20 0.165 2.50 0.098 1.80 0.071 2.50 L M
LTMR060D 08 L M
LTML060H 06 31.94 0.283 151 11.00 0.433 22.00 0.866 6.20 0.244 4.00 0.157 4.19 0.165 6.50 L M
LTMR060H 06 L M
LTML060H 08 31.94 0.283 58 11.00 0.433 22.00 0.866 6.20 0.244 4.00 0.157 1.80 0.071 2.50 L M
LTMR060H 08 L M
LTML060L 06 31.94 0.283 205 11.00 0.433 22.00 0.866 8.20 0.323 6.00 0.236 4.19 0.165 6.50 M N
LTMR060L 06 M N
LTML060L 08 31.94 0.283 79 11.00 0.433 22.00 0.866 8.20 0.323 6.00 0.236 1.80 0.071 2.50 M N
LTMR060L 08 M N
LTL025E 06 0.64 0.025 47.45 0.420 360 12.70 0.500 25.40 1.000 8.26 0.325 5.54 0.218 6.99 0.275 9.50 LM MN
LTR025E 06 LM MN
LTL025E 08 47.45 0.420 360 15.88 0.625 31.75 1.250 12.57 0.495 9.12 0.359 4.11 0.162 5.50 M N
LTR025E 08 M N
LTL028E 06 0.71 0.028 62.14 0.550 360 12.70 0.500 25.40 1.000 9.02 0.355 6.22 0.245 7.75 0.305 9.50 M P
LTR028E 06 M P
LTL028E 08 62.14 0.550 360 25.40 1.000 50.80 2.000 15.04 0.592 11.13 0.438 4.62 0.182 5.50 Q R
LTR028E 08 Q R
LTML075F 06 0.75 0.030 58.84 0.521 90 12.50 0.492 25.00 0.984 5.00 0.197 3.00 0.118 5.26 0.207 6.50 L M
LTMR075F 06 L M
LTML075F 08 58.84 0.521 35 12.50 0.492 25.00 0.984 5.00 0.197 3.00 0.118 2.26 0.089 2.50 L M
LTMR075F 08 L M
LTML075K 06 58.84 0.521 143 12.50 0.492 25.00 0.984 7.50 0.295 5.00 0.197 5.26 0.207 6.50 L M
LTMR075K 06 L M
LTML075K 08 58.84 0.521 55 12.50 0.492 25.00 0.984 7.50 0.295 5.00 0.197 2.26 0.089 2.50 L M
LTMR075K 08 L M
LTML075Q 06 58.84 0.521 207 12.50 0.492 25.00 0.984 10.50 0.413 8.00 0.315 5.26 0.207 6.50 M N
LTMR075Q 06 M N
LTML075Q 08 58.84 0.521 80 12.50 0.492 25.00 0.984 10.50 0.413 8.00 0.315 2.26 0.089 2.50 M N
LTMR075Q 08 M N
LTL030F 06 0.76 0.030 76.83 0.680 360 12.70 0.500 25.40 1.000 10.41 0.410 6.35 0.250 8.26 0.325 9.50 M P
LTR030F 06 M P
LTL030F 08 76.83 0.680 360 25.40 1.000 50.80 2.000 16.05 0.632 11.51 0.453 4.95 0.195 5.50 Q Q
LTR030F 08 Q Q
LTL032F 06 0.81 0.032 98.86 0.875 360 12.70 0.500 25.40 1.000 9.70 0.382 6.35 0.250 8.76 0.345 9.50 M P
LTR032F 06 M P
LTL032F 08 98.86 0.875 360 25.40 1.000 50.80 2.000 16.18 0.637 11.91 0.469 5.28 0.208 5.50 R S
LTR032F 08 R S
LTL035G 06 0.89 0.035 120.89 1.070 360 15.88 0.625 31.75 1.250 11.99 0.472 7.92 0.312 9.65 0.380 9.50 N P
LTR035G 06 N P
LTL035G 08 120.89 1.070 360 25.40 1.000 50.80 2.000 18.87 0.743 13.89 0.547 5.79 0.228 5.50 U V
LTR035G 08 U V
LTL038G 06 0.97 0.038 144.62 1.280 360 15.88 0.625 31.75 1.250 13.06 0.514 9.02 0.355 10.41 0.410 9.50 N P
LTR038G 06 N P
LTL038G 08 144.62 1.280 360 25.40 1.000 50.80 2.000 21.87 0.861 15.88 0.625 6.27 0.247 5.50 X Z
LTR038G 08 X Z
LTML100J 06 1.00 0.039 136.12 1.205 93 17.50 0.689 35.00 1.378 7.00 0.276 4.00 0.157 7.01 0.276 6.50 L M
LTMR100J 06 L M
LTML100J 08 136.12 1.205 36 17.50 0.689 35.00 1.378 7.00 0.276 4.00 0.157 3.00 0.118 2.50 L M
LTMR100J 08 L M
LTML100N 06 136.12 1.205 124 17.50 0.689 35.00 1.378 9.00 0.354 6.00 0.236 7.01 0.276 6.50 M N
LTMR100N 06 M N
LTML100N 08 136.12 1.205 48 17.50 0.689 35.00 1.378 9.00 0.354 6.00 0.236 3.00 0.118 2.50 M N
LTMR100N 08 M N
LTML100T 06 136.12 1.205 201 17.50 0.689 35.00 1.378 14.00 0.551 10.00 0.394 7.01 0.276 6.50 P R
LTMR100T 06 P R
LTML100T 08 136.12 1.205 77 17.50 0.689 35.00 1.378 14.00 0.551 10.00 0.394 3.00 0.118 2.50 N P
LTMR100T 08 N P
186 Torque shown relates only to music wire. When using stainless steel, multiply by 0.933.
TORSION SPRINGS 360º
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL040H 06 1.02 0.040 169.48 1.500 360 25.40 1.000 50.80 2.000 12.90 0.508 8.71 0.343 11.94 0.470 10.50 N P
LTR040H 06 N P
LTL040H 08 169.48 1.500 360 25.40 1.000 50.80 2.000 17.07 0.672 12.70 0.500 8.64 0.340 7.50 R S
LTR040H 08 R S
LTL045H 06 1.14 0.045 242.92 2.150 360 25.40 1.000 50.80 2.000 13.94 0.549 9.53 0.375 13.46 0.530 10.50 N P
LTR045H 06 N P
LTL045H 08 242.92 2.150 360 25.40 1.000 50.80 2.000 19.08 0.751 14.27 0.562 9.70 0.382 7.50 U V
LTR045H 08 U V
LTL048J 06 1.22 0.048 310.71 2.750 360 25.40 1.000 50.80 2.000 15.11 0.595 10.31 0.406 14.48 0.570 10.50 Q R
LTR048J 06 Q R
LTL048J 08 310.71 2.750 360 25.40 1.000 50.80 2.000 19.38 0.763 14.27 0.562 10.36 0.408 7.50 T U
LTR048J 08 T U
LTML125M 06 1.25 0.049 255.09 2.258 87 20.00 0.787 40.00 1.575 8.50 0.335 5.00 0.197 8.74 0.344 6.50 M N
LTMR125M 06 M N
LTML125M 08 255.09 2.258 33 20.00 0.787 40.00 1.575 8.50 0.335 5.00 0.197 3.76 0.148 2.50 M N
LTMR125M 08 M N
LTML125R 06 255.09 2.258 123 20.00 0.787 40.00 1.575 11.50 0.453 8.00 0.315 8.74 0.344 6.50 M N
LTMR125R 06 M N
LTML125R 08 255.09 2.258 47 20.00 0.787 40.00 1.575 11.50 0.453 8.00 0.315 3.76 0.148 2.50 M N
LTMR125R 08 M N
LTML125V 06 255.09 2.258 182 20.00 0.787 40.00 1.575 16.50 0.650 12.00 0.472 8.74 0.344 6.50 S T
LTMR125V 06 S T
LTML125V 08 255.09 2.258 70 20.00 0.787 40.00 1.575 16.50 0.650 12.00 0.472 3.76 0.148 2.50 S T
LTMR125V 08 S T
LTL051J 06 1.30 0.051 350.25 3.100 360 25.40 1.000 50.80 2.000 15.95 0.628 11.10 0.437 15.24 0.600 10.50 Q R
LTR051J 06 Q R
LTL051J 08 350.25 3.100 360 25.40 1.000 50.80 2.000 21.82 0.859 16.28 0.641 11.02 0.434 7.50 X X
LTR051J 08 X X
LTL054K 06 1.37 0.054 395.45 3.500 360 25.40 1.000 50.80 2.000 17.63 0.694 12.70 0.500 17.53 0.690 11.50 S T
LTR054K 06 S T
LTL054K 08 395.45 3.500 360 25.40 1.000 50.80 2.000 21.54 0.848 16.28 0.641 13.03 0.513 8.50 X X
LTR054K 08 X X
LTL059K 06 1.50 0.059 508.43 4.500 360 25.40 1.000 50.80 2.000 18.01 0.709 12.45 0.490 19.05 0.750 11.50 T V
LTR059K 06 T V
LTL059K 08 508.43 4.500 360 25.40 1.000 50.80 2.000 23.85 0.939 17.86 0.703 14.22 0.560 8.50 X Y
LTR059K 08 X Y
LTML150P 06 425.51 3.767 82 22.50 0.886 45.00 1.772 10.00 0.394 6.00 0.236 10.49 0.413 6.50 M N
LTMR150P 06 M N
LTML150P 08 425.51 3.767 31 22.50 0.886 45.00 1.772 10.00 0.394 6.00 0.236 4.50 0.177 2.50 M N
LTMR150P 08 M N
LTML150U 06 425.51 3.767 130 22.50 0.886 45.00 1.772 15.00 0.591 10.00 0.394 10.49 0.413 6.50 R S
LTMR150U 06 R S
LTML150U 08 425.51 3.767 50 22.50 0.886 45.00 1.772 15.00 0.591 10.00 0.394 4.50 0.177 2.50 Q R
LTMR150U 08 Q R
LTML150X 06 425.51 3.767 178 22.50 0.886 45.00 1.772 20.00 0.787 15.00 0.591 10.49 0.413 6.50 V X
LTMR150X 06 V X
LTML150X 08 425.51 3.767 68 22.50 0.886 45.00 1.772 20.00 0.787 15.00 0.591 4.50 0.177 2.50 U W
LTMR150X 08 U W
LTL063L 08 1.52 0.060 621.42 5.500 360 25.40 1.000 50.80 2.000 21.08 0.830 15.47 0.609 14.48 0.570 8.50 W Y
LTR063L 08 W Y
LTL063L 06 1.60 0.063 621.42 5.500 360 25.40 1.000 50.80 2.000 20.27 0.798 14.68 0.578 20.45 0.805 11.50 V X
LTR063L 06 V X
LTL070M 06 1.78 0.070 847.39 7.500 360 25.40 1.000 50.80 2.000 21.41 0.843 15.06 0.593 22.61 0.890 11.50 X Z
LTR070M 06 X Z
LTL070M 08 847.39 7.500 360 38.10 1.500 76.20 3.000 28.35 1.116 21.44 0.844 16.89 0.665 8.50 Y BA
LTR070M 08 Y BA
LTL075M 06 1.91 0.075 1039.80 9.203 360 25.40 1.000 50.80 2.000 25.02 0.985 16.76 0.660 22.35 0.880 10.50 Z BB
LTR075M 06 Z BB
LTL075M 08 1039.80 9.203 360 44.45 1.750 88.90 3.500 34.24 1.348 25.81 1.016 16.21 0.638 7.50 BA BC
LTR075M 08 BA BC
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 187
360º TORSION SPRINGS
● Left Hand or Right Helix ● Music Wire (Plated) or Stainless Steel (Passivated)
LEE NOMINAL (T) MAXIMUM DEFLECTION (A) SUGGESTED (L) BODY PRICE GROUP
(R) OUTSIDE TOTAL
STOCK WIRE TORQUE TO MAX. LENGTH MANDREL LENGTH
RADIUS DIAMETER NO. OF Music 302
NUMBER DIAMETER (see footnotes) TORQUE OF LEG SIZE APPROX. Wire Stainless
COILS
MM IN N-MM IN-LB DEG (°) MM IN MM IN MM IN MM IN MM IN M S
LTL078N 06 1.98 0.078
1180.69 10.450 360 25.40 1.000 50.80 2.000 25.78 1.015 17.27 0.680 23.24 0.915 10.50 BB BD
LTR078N 06 BB BD
LTL078N 08 1180.69 10.450 360 44.45 1.750 88.90 3.500 35.31 1.390 26.59 1.047 16.84 0.663 7.50 BC BE
LTR078N 08 BC BE
LTML200S 06 2.00 0.079 978.56 8.663 77 30.00 1.181 60.00 2.362 13.00 0.512 8.00 0.315 14.00 0.551 6.50 P Q
LTMR200S 06 P Q
LTML200S 08 978.56 8.663 30 30.00 1.181 60.00 2.362 13.00 0.512 8.00 0.315 5.99 0.236 2.50 N P
LTMR200S 08 N P
LTML200W 06 978.56 8.663 112 30.00 1.181 60.00 2.362 18.00 0.709 12.00 0.472 14.00 0.551 6.50 V X
LTMR200W 06 V X
LTML200W 08 978.56 8.663 43 30.00 1.181 60.00 2.362 18.00 0.709 12.00 0.472 5.99 0.236 2.50 U W
LTMR200W 08 U W
LTML200Y 06 978.56 8.663 175 30.00 1.181 60.00 2.362 27.00 1.063 20.00 0.787 14.00 0.551 6.50 Y BA
LTMR200Y 06 Y BA
LTML200Y 08 978.56 8.663 67 30.00 1.181 60.00 2.362 27.00 1.063 20.00 0.787 5.99 0.236 2.50 X X
LTMR200Y 08 X X
LTL085N 06 2.16 0.085 1453.10 12.861 360 31.75 1.250 63.50 2.500 27.08 1.066 18.16 0.715 27.53 1.084 11.50 BD BF
LTR085N 06 BD BF
LTL085N 08 1452.98 12.860 360 50.80 2.000 101.60 4.000 35.86 1.412 27.38 1.078 20.52 0.808 8.50 BE BF
LTR085N 08 BE BF
LTL095P 06 2.41 0.095 1937.46 17.148 360 38.10 1.500 76.20 3.000 31.57 1.243 21.46 0.845 30.76 1.211 11.50 BF BH
LTR095P 06 BF BH
LTL095P 08 1936.56 17.140 360 50.80 2.000 101.60 4.000 41.86 1.648 31.75 1.250 22.91 0.902 8.50 BG BJ
LTR095P 08 BG BJ
LTL105Q 06 2.67 0.105 2372.68 21.000 360 44.45 1.750 88.90 3.500 34.77 1.369 23.01 0.906 36.00 1.418 12.50 BF BH
LTR105Q 06 BF BH
LTL105Q 08 2372.68 21.000 360 50.80 2.000 101.60 4.000 45.64 1.797 34.93 1.375 27.99 1.102 9.50 BG BJ
LTR105Q 08 BG BJ
LTL115R 06 2.92 0.115 3163.58 28.000 360 50.80 2.000 101.60 4.000 37.21 1.465 24.61 0.969 39.43 1.553 12.50 BG BJ
LTR115R 06 BG BJ
LTL115R 08 3163.58 28.000 360 50.80 2.000 101.60 4.000 49.30 1.941 37.69 1.484 30.68 1.208 9.50 BH BK
LTR115R 08 BH BK
LTL125S 06 3.18 0.125 3615.51 32.000 360 50.80 2.000 101.60 4.000 40.77 1.605 27.53 1.084 49.21 1.938 14.50 BH BK
LTR125S 06 BH BK
LTL125S 08 3615.51 32.000 360 50.80 2.000 101.60 4.000 49.99 1.968 38.51 1.516 39.67 1.562 11.50 BJ BL
LTR125S 08 BJ BL
LTL135T 06 3.43 0.135 4519.39 40.000 360 50.80 2.000 101.60 4.000 44.58 1.755 30.18 1.188 53.15 2.093 14.50 BK BM
LTR135T 06 BK BM
LTL135T 08 4519.39 40.000 360 53.98 2.125 107.95 4.250 54.38 2.141 42.06 1.656 42.88 1.688 11.50 BL BP
LTR135T 08 BL BP
188 Torque shown relates only to music wire. When using stainless steel, multiply by 0.933.
C o n s ta n t f o r c e s p r i n g s
Guide to using tables
Width
Inside Diameter
is the width of material
is the natural inside diameter
used to make a spring.
of a spring before
assembling with a drum.
C o n s ta n t f o r C e s p r i n g s
Price Group
Lee Stock Number ● Stainless Steel 301
reference to price list.
ordering reference. LEE LIfE CyCLES ThICKNESS (T) WIDTh (W) LENGTh INITAL WORKING INSIDE DRUM PRICE
STOCK DEfLECTION (If) DEfLECTION (Wf) DIAMETER (ID) DIAMETER (DD) LOAD (P) + 20% GROUP
NUMBER
MM IN MM IN MM IN MM IN MM IN MM IN MM IN N LB
LCF 025 06 038S 2500 0.15 0.006 9.53 0.375 533.40 21.000 19.81 0.780 457.20 18.000 11.13 0.438 13.28 0.523 6.59 1.48 Y Load
LCF 025 06 050S 0.15 0.006 12.70 0.500 533.40 21.000 19.81 0.780 457.20 18.000 11.11 0.438 13.28 0.523 8.77 1.97 Z
LCF 025 08 050S
LCF 025 10 063S
0.20
0.25
0.008
0.010
12.70
15.88
0.500
0.625
711.20
736.60
28.000 26.92
29.000 33.27
1.060 609.60 24.000
1.310 609.60 24.000
14.68
18.65
0.578
0.734
17.70
22.17
0.697
0.873
11.70
18.33
2.63
4.12
BC
BG
is the force applied to a
LCF 025 12 075S 0.30 0.012 19.05 0.750 914.40 36.000 39.62 1.560 762.00 30.000 22.23 0.875 26.67 1.050 26.43 5.94 BG
Life Cycles LCF 025 12 100S 0.30 0.012 25.40 1.000 914.40 36.000 39.62 1.560 762.00 30.000 22.23 0.875 26.67 1.050 35.24 7.92 BH spring that causes a deflection.
LCF 025 16 100S 0.41 0.016 25.40 1.000 965.20 38.000 53.34 2.100 762.00 30.000 29.37 1.156 35.56 1.400 47.17 10.60 BW
LCF 025 20 125S 0.51 0.020 31.75 1.250 1,193.80 47.000 66.04 2.600 914.40 36.000 37.31 1.469 44.45 1.750 73.42 16.50 CD
is the number of times a LCF 040 04 025S 4000 0.10 0.004 6.35 0.250 381.00 15.000 15.49 0.610 304.80 12.000 8.64 0.340 10.16 0.400 2.22 0.50 Z
LCF 040 05 031S 0.13 0.005 7.94 0.313 431.80 17.000 19.05 0.750 304.80 12.000 9.40 0.370 12.70 0.500 4.58 1.03 Z DRUM DIAMETER
LCF 040 06 038S 0.15 0.006 9.53 0.375 609.60 24.000 23.88 0.940 457.20 18.000 11.43 0.450 15.75 0.620 6.59 1.48 Z
spring can be loaded and LCF 040 06 050S
LCF 040 08 050S
0.15
0.20
0.006
0.008
12.70
12.70
0.500
0.500
635.00
762.00
25.000 24.64
30.000 31.50
0.970 457.20 18.000
1.240 609.60 24.000
11.43
14.99
0.450
0.590
16.51
20.83
0.650
0.820
8.77
11.70
1.97
2.63
BA
BC is the outside diameter of
unloaded between two LCF 040 10 063S 0.25 0.010 15.88 0.625 838.20 33.000 37.85 1.490 609.60 24.000 18.54 0.730 25.15 0.990 18.33 4.12 BG
LCF 040 12 075S 0.30 0.012 19.05 0.750 990.60 39.000 45.47 1.790 762.00 30.000 22.35 0.880 30.23 1.190 26.43 5.94 BG a drum/shaft over which a
LCF 040 12 100S 0.30 0.012 25.40 1.000 990.60 39.000 45.72 1.800 762.00 30.000 22.35 0.880 30.48 1.200 35.24 7.92 BJ
points without permanently LCF 040 16 100S 0.41 0.016 25.40 1.000 1,016.00 40.000 57.91 2.280 762.00 30.000 30.48 1.200 38.61 1.520 47.17 10.60 BR
LCF 040 20 125S 0.51 0.020 31.75 1.250 1,270.00 50.000 71.88 2.830 914.40 36.000 37.34 1.470 48.01 1.890 73.42 16.50 BY spring fits firmly.
changing its properties. LCF 130 04 025S
LCF 130 05 031S
13000 0.10
0.13
0.004
0.005
6.35
7.94
0.250
0.313
381.00
406.40
15.000 20.32
16.000 25.40
0.800 304.80 12.000
1.000 304.80 12.000
11.13
14.30
0.438
0.563
13.54
16.89
0.533
0.665
1.42
2.18
0.32
0.49
Z
Z
LCF 130 06 038S 0.15 0.006 9.53 0.375 584.20 23.000 30.48 1.200 457.20 18.000 17.07 0.672 20.27 0.798 3.16 0.71 BA Working Deflection
LCF 130 06 050S 0.15 0.006 12.70 0.500 584.20 23.000 30.48 1.200 457.20 18.000 17.07 0.672 20.27 0.798 4.23 0.95 BA
LCF 130 08 050S 0.20 0.008 12.70 0.500 762.00 30.000 40.39 1.590 609.60 24.000 22.23 0.875 26.92 1.060 5.61 1.26 BG
is the deflection to which a
Thickness LCF 130 10 063S
LCF 130 12 075S
0.25
0.30
0.010
0.012
15.88
19.05
0.625
0.750
812.80
1,016.00
32.000 50.80
40.000 60.45
2.000 609.60 24.000
2.380 762.00 30.000
28.18
34.13
1.109
1.344
33.78
40.39
1.330
1.590
8.81
12.64
1.98
2.84
BM
BQ
LCF 130 12 100S 0.30 0.012 25.40 1.000 1,016.00 40.000 60.45 2.380 762.00 30.000 34.13 1.344 40.39 1.590 16.86 3.79 BQ spring can be safely subjected
is the thickness of material LCF 130 15 100S 0.38 0.015 25.40 1.000 1,066.80 42.000 75.69 2.980 762.00 30.000 42.47 1.672 50.55 1.990 21.09 4.74 BW
LCF 130 20 125S 0.51 0.020 31.75 1.250 1,320.80 52.000 100.84 3.970 914.40 36.000 56.36 2.219 67.31 2.650 42.18 9.48 CE
to without permanently
used to make a spring. LCF 250 04 025S
LCF 250 05 038S
25000 0.10
0.13
0.004
0.005
6.35
7.94
0.250
0.375
558.80
736.60
22.000 22.35
29.000 27.69
0.880 457.20 18.000
1.090 609.60 24.000
13.46
16.51
0.530
0.650
14.99
18.54
0.590
0.730
1.02
1.91
0.23
0.43
Z
BA
LCF 250 06 038S 0.15 0.006 9.53 0.375 762.00 30.000 33.02 1.300 609.60 24.000 19.56 0.770 21.84 0.860 2.31 0.52 BA changing its properties.
LCF 250 06 050S 0.15 0.006 12.70 0.500 762.00 30.000 34.54 1.360 609.60 24.000 20.32 0.800 22.86 0.900 3.11 0.70 BB
fully unwound. LCF 250 20 125S 0.51 0.020 31.75 1.250 1,524.00 60.000 107.95 4.250 1,066.80 42.000 64.26 2.530 71.88 2.830 25.94 5.83 CE
is the minimum deflection of
a spring needed to attain the
specified load.
Additional Information
Manufactured from high yield 301 stainless steel strip our constant force springs exert a near constant restraining force
to resist uncoiling. This natural inbuilt stress resists load at an even rate and so makes the springs suitable for use in
retractor mechanisms. Common applications include counterbalance springs, car seat belt and cable retractors.
Four life cycle ranges are offered: 2,500, 4,000, 13,000 and 25,000 covering loads from 1.02 to 73.42N (0.23 to 16.50lb).
Mounting
Constant force springs are generally tightly
Call: +44 (0)118 coiled
978 1800 | Visit: on a drum
www.leespring.com with either
or www.leespring.co.uk the
| Fax: +44 free
(0)118 end
977 4832 orsales@leespring.co.uk
| Email: the drum attached 19 to the load.
This relationship can also be reversed.
1 The drum diameter should be 10 to 20% larger than the inside diameter of the spring
2 A minimum of one and one-half coils should remain on the drum at maximum extension
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 189
C o n s ta n t f o r c e s p r i n g s
● Stainless Steel 301
LEE Life Cycles Thickness (T) WIDTH (W) Length INITAL Working Inside Drum PRICE
STOCK DEFLECTION (If) Deflection (Wf) Diameter (ID) Diameter (DD) Load (P) + 20% GROUP
NUMBER
MM IN MM IN MM IN MM IN MM IN MM IN MM IN N LB
LCF 025 04 025S 2500 0.10 0.004 6.35 0.250 355.60 14.000 13.21 0.520 304.80 12.000 7.54 0.297 8.86 0.349 2.94 0.66 Y
LCF 025 05 031S 0.13 0.005 7.94 0.313 381.00 15.000 16.51 0.650 304.80 12.000 9.12 0.359 11.07 0.436 4.58 1.03 Y
LCF 025 06 038S 0.15 0.006 9.53 0.375 533.40 21.000 19.81 0.780 457.20 18.000 11.13 0.438 13.28 0.523 6.59 1.48 Y
LCF 025 06 050S 0.15 0.006 12.70 0.500 533.40 21.000 19.81 0.780 457.20 18.000 11.11 0.438 13.28 0.523 8.77 1.97 Z
LCF 025 08 050S 0.20 0.008 12.70 0.500 711.20 28.000 26.92 1.060 609.60 24.000 14.68 0.578 17.70 0.697 11.70 2.63 BC
LCF 025 10 063S 0.25 0.010 15.88 0.625 736.60 29.000 33.27 1.310 609.60 24.000 18.65 0.734 22.17 0.873 18.33 4.12 BG
LCF 025 12 075S 0.30 0.012 19.05 0.750 914.40 36.000 39.62 1.560 762.00 30.000 22.23 0.875 26.67 1.050 26.43 5.94 BG
LCF 025 12 100S 0.30 0.012 25.40 1.000 914.40 36.000 39.62 1.560 762.00 30.000 22.23 0.875 26.67 1.050 35.24 7.92 BH
LCF 025 16 100S 0.41 0.016 25.40 1.000 965.20 38.000 53.34 2.100 762.00 30.000 29.37 1.156 35.56 1.400 47.17 10.60 BW
LCF 025 20 125S 0.51 0.020 31.75 1.250 1,193.80 47.000 66.04 2.600 914.40 36.000 37.31 1.469 44.45 1.750 73.42 16.50 CD
LCF 040 04 025S 4000 0.10 0.004 6.35 0.250 381.00 15.000 15.49 0.610 304.80 12.000 8.64 0.340 10.16 0.400 2.22 0.50 Z
LCF 040 05 031S 0.13 0.005 7.94 0.313 431.80 17.000 19.05 0.750 304.80 12.000 9.40 0.370 12.70 0.500 4.58 1.03 Z
LCF 040 06 038S 0.15 0.006 9.53 0.375 609.60 24.000 23.88 0.940 457.20 18.000 11.43 0.450 15.75 0.620 6.59 1.48 Z
LCF 040 06 050S 0.15 0.006 12.70 0.500 635.00 25.000 24.64 0.970 457.20 18.000 11.43 0.450 16.51 0.650 8.77 1.97 BA
LCF 040 08 050S 0.20 0.008 12.70 0.500 762.00 30.000 31.50 1.240 609.60 24.000 14.99 0.590 20.83 0.820 11.70 2.63 BC
LCF 040 10 063S 0.25 0.010 15.88 0.625 838.20 33.000 37.85 1.490 609.60 24.000 18.54 0.730 25.15 0.990 18.33 4.12 BG
LCF 040 12 075S 0.30 0.012 19.05 0.750 990.60 39.000 45.47 1.790 762.00 30.000 22.35 0.880 30.23 1.190 26.43 5.94 BG
LCF 040 12 100S 0.30 0.012 25.40 1.000 990.60 39.000 45.72 1.800 762.00 30.000 22.35 0.880 30.48 1.200 35.24 7.92 BJ
LCF 040 16 100S 0.41 0.016 25.40 1.000 1,016.00 40.000 57.91 2.280 762.00 30.000 30.48 1.200 38.61 1.520 47.17 10.60 BR
LCF 040 20 125S 0.51 0.020 31.75 1.250 1,270.00 50.000 71.88 2.830 914.40 36.000 37.34 1.470 48.01 1.890 73.42 16.50 BY
LCF 130 04 025S 13000 0.10 0.004 6.35 0.250 381.00 15.000 20.32 0.800 304.80 12.000 11.13 0.438 13.54 0.533 1.42 0.32 Z
LCF 130 05 031S 0.13 0.005 7.94 0.313 406.40 16.000 25.40 1.000 304.80 12.000 14.30 0.563 16.89 0.665 2.18 0.49 Z
LCF 130 06 038S 0.15 0.006 9.53 0.375 584.20 23.000 30.48 1.200 457.20 18.000 17.07 0.672 20.27 0.798 3.16 0.71 BA
LCF 130 06 050S 0.15 0.006 12.70 0.500 584.20 23.000 30.48 1.200 457.20 18.000 17.07 0.672 20.27 0.798 4.23 0.95 BA
LCF 130 08 050S 0.20 0.008 12.70 0.500 762.00 30.000 40.39 1.590 609.60 24.000 22.23 0.875 26.92 1.060 5.61 1.26 BG
LCF 130 10 063S 0.25 0.010 15.88 0.625 812.80 32.000 50.80 2.000 609.60 24.000 28.18 1.109 33.78 1.330 8.81 1.98 BM
LCF 130 12 075S 0.30 0.012 19.05 0.750 1,016.00 40.000 60.45 2.380 762.00 30.000 34.13 1.344 40.39 1.590 12.64 2.84 BQ
LCF 130 12 100S 0.30 0.012 25.40 1.000 1,016.00 40.000 60.45 2.380 762.00 30.000 34.13 1.344 40.39 1.590 16.86 3.79 BQ
LCF 130 15 100S 0.38 0.015 25.40 1.000 1,066.80 42.000 75.69 2.980 762.00 30.000 42.47 1.672 50.55 1.990 21.09 4.74 BW
LCF 130 20 125S 0.51 0.020 31.75 1.250 1,320.80 52.000 100.84 3.970 914.40 36.000 56.36 2.219 67.31 2.650 42.18 9.48 CE
LCF 250 04 025S 25000 0.10 0.004 6.35 0.250 558.80 22.000 22.35 0.880 457.20 18.000 13.46 0.530 14.99 0.590 1.02 0.23 Z
LCF 250 05 038S 0.13 0.005 7.94 0.375 736.60 29.000 27.69 1.090 609.60 24.000 16.51 0.650 18.54 0.730 1.91 0.43 BA
LCF 250 06 038S 0.15 0.006 9.53 0.375 762.00 30.000 33.02 1.300 609.60 24.000 19.56 0.770 21.84 0.860 2.31 0.52 BA
LCF 250 06 050S 0.15 0.006 12.70 0.500 762.00 30.000 34.54 1.360 609.60 24.000 20.32 0.800 22.86 0.900 3.11 0.70 BB
LCF 250 08 050S 0.20 0.008 12.70 0.500 965.20 38.000 45.72 1.800 762.00 30.000 27.18 1.070 30.48 1.200 4.14 0.93 BG
LCF 250 10 063S 0.25 0.010 15.88 0.625 1,016.00 40.000 57.91 2.280 762.00 30.000 34.54 1.360 38.61 1.520 6.50 1.46 BG
LCF 250 12 075S 0.30 0.012 19.05 0.750 1,219.20 48.000 68.33 2.690 914.40 36.000 40.64 1.600 45.47 1.790 9.30 2.09 BM
LCF 250 12 100S 0.30 0.012 25.40 1.000 1,219.20 48.000 68.33 2.690 914.40 36.000 40.64 1.600 45.47 1.790 12.46 2.80 BQ
LCF 250 15 100S 0.38 0.015 25.40 1.000 1,422.40 56.000 83.82 3.300 1,066.80 42.000 49.78 1.960 55.88 2.200 15.57 3.50 BW
LCF 250 20 125S 0.51 0.020 31.75 1.250 1,524.00 60.000 107.95 4.250 1,066.80 42.000 64.26 2.530 71.88 2.830 25.94 5.83 CE
190 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
B AT T E R Y S P R I N G S
Guide to using tables
Free Length
ID Top
OD Base
length of the spring in
inside diameter at
outside diameter at the
the unloaded position.
the top of the spring.
base of the spring.
ID Eyelet
Wire Diameter inside diameter of the
B AT T E R Y S P R I N G S
in ascending order of size. eyelet inside the base
● Interior Mount Battery Springs ● Nickel Coated Music Wire
LEE
BATTERY WIRE OD ID FREE ID APPROX INSTALLED CENTRE TO PRICE
of the spring.
STOCK
SIZE DIAMETER BASE TOP LENGTH EYELET LOAD HEIGHT CENTRE LENGTH GROUP
NUMBER
MM IN MM IN MM IN MM IN MM IN N LB MM IN MM IN
Music Wire
Lee Stock Number LB 024A 01 AA AA 0.61 0.024 9.91 0.390 5.59 0.220 11.18 0.440 2.79 0.110 7.79 1.75 3.61 0.142 N/A N/A P
LB 024A 01 AAA AAA 0.61 0.024 9.14 0.360 4.06 0.160 9.02 0.355 2.79 0.110 6.67 1.50 4.95 0.195 N/A N/A P
ordering reference. LB 032A 01 c c 0.81 0.032 13.72 0.540 8.38 0.330 13.21 0.520 4.45 0.175 4.45 1.00 8.64 0.340 N/A N/A P Price Group
LB 036A 01 D D 0.91 0.036 16.76 0.660 9.14 0.360 18.29 0.720 4.45 0.175 13.35 3.00 4.45 0.175 N/A N/A P
BeryLLiuM coPPer
LBc 028A 01 AA AA 0.71 0.028 9.91 0.390 5.59 0.220 11.18 0.440 2.79 0.110 7.79 1.75 3.61 0.142 N/A N/A s
reference to the price list.
LBc 028A 01 AAA AAA 0.71 0.028 9.14 0.360 4.06 0.160 9.02 0.355 2.79 0.110 6.67 1.50 4.95 0.195 N/A N/A s
LBc 038A 01 c c 0.97 0.038 13.72 0.540 8.38 0.330 13.21 0.520 4.45 0.175 4.45 1.00 8.64 0.340 N/A N/A u
LBc 040A 01 D D 1.02 0.040 16.76 0.660 9.14 0.360 18.29 0.720 4.45 0.175 13.35 3.00 4.45 0.175 N/A N/A X
Battery Size MM IN MM IN MM IN MM IN MM IN N LB MM IN MM IN
Music Wire distance between points
size of battery the springs LB 024B 01 AA AA 0.61 0.024 9.91 0.390 5.59 0.220 11.18 0.440 2.79 0.110 7.79 1.75 3.61 0.142 13.84 0.545 P
LB 024B 01 AAA
LB 032B 01 c
AAA
c
0.61
0.81
0.024
0.032
9.14
13.72
0.360
0.540
4.06
8.38
0.160
0.330
9.02
13.21
0.355
0.520
2.79
4.45
0.110
0.175
6.67
4.45
1.50
1.00
4.95
8.64
0.195
0.340
12.14
24.99
0.478
0.984
P
P
as shown in graphical
have been to designed to LB 036B 01 D D 0.91 0.036 16.76 0.660 9.14 0.360 18.29 0.720 4.45 0.175 13.35 3.00 4.45 0.175 30.94 1.218 P
BeryLLiuM coPPer images below.
work with. LBc 028B 01 AA
LBc 028B 01 AAA
AA
AAA
0.71
0.71
0.028
0.028
9.91
9.14
0.390
0.360
5.59
4.06
0.220
0.160
11.18
9.02
0.440
0.355
2.79
2.79
0.110
0.110
7.79
6.67
1.75
1.50
3.61
4.95
0.142
0.195
13.84
12.14
0.545
0.478
s
s
LBc 038B 01 c c 0.97 0.038 13.72 0.540 8.38 0.330 13.21 0.520 4.45 0.175 4.45 1.00 8.64 0.340 24.99 0.984 u
LBc 040B 01 D D 1.02 0.040 16.76 0.660 9.14 0.360 18.29 0.720 4.45 0.175 13.35 3.00 4.45 0.175 30.94 1.218 X
Most alkaline batteries use nickel plated containers and so nickel coatings on the load or force
● Double Mount Battery Springs
contact surfaces are STOCKgenerally
LEE
BATTERY preferred.
WIRE OD The use ID of similar
FREE materials
ID also removes
APPROX INSTALLED CENTRE TO PRICE required to reach the
SIZE DIAMETER BASE TOP LENGTH EYELET LOAD HEIGHT CENTRE LENGTH GROUP
NUMBER
the possibility of galvanic corrosion MM IN and
MM enhances
IN MM IN resistance
MM IN MM toINwear. N Additionally,
LB MM IN MM IN
installed height.
Music Wire
nickel helps to break down
LB 024D 01 AA AA the
0.61 oxide
0.024 that
9.91 0.390 can5.59 form on 0.440
0.220 11.18 batteryN/A contact
N/A 7.79 1.75 surfaces,
3.61 0.142 15.75 0.620 T
LB 024D 01 AAA AAA 0.61 0.024 9.14 0.360 4.06 0.160 9.02 0.355 N/A N/A 6.67 1.50 4.95 0.195 11.84 0.466 T
it offers excellent corrosion
LB 032D 01 c c resistance
0.81 0.032 13.72and 0.540 is 8.38
an 0.330excellent
13.21 0.520 conductor
N/A N/A 4.45 of 1.00 electricity.
8.64 0.340 27.18 1.070 T
LB 036D 01 D D 0.91 0.036 16.76 0.660 9.14 0.360 18.29 0.720 N/A N/A 13.35 3.00 4.45 0.175 34.04 1.340 T
BeryLLiuM coPPer
3 We can now offer our battery springs in silver coated beryllium copper. Beryllium
LBc 028D 01 AA
LBc 028D 01 AAA
AA
AAA
0.71
0.71
0.028
0.028
9.91
9.14
0.390
0.360
5.59
4.06
0.220
0.160
11.18
9.02
0.440
0.355
N/A
N/A
N/A
N/A
7.79
V
6.67
y
1.75
1.50
3.61
4.95
0.142
0.195
15.75
11.84
0.620
0.466
alloys. Silver coating further enhances electrical and thermal conductivity. Electric
conductivity is 65 to 70% that of copper while strength and fatigue resistance are
158 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
comparable with higher beryllium alloys. The light silver-plating also facilitates easy
soldering. Beryllium copper is corrosion resistance in many environments, and is
both non-magnetic and non-sparking.
● Double Mount
● Exterior Mount Battery Springs
Battery Springs
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 191
B AT T E R Y S P R I N G S
● Interior Mount Battery Springs
LEE
BATTERY WIRE OD ID FREE ID APPROX INSTALLED CENTRE TO PRICE
STOCK
SIZE DIAMETER BASE TOP LENGTH EYELET LOAD HEIGHT CENTRE LENGTH GROUP
NUMBER
MM IN MM IN MM IN MM IN MM IN N LB MM IN MM IN
Music Wire – nickel coated
LB 024A 01 AA AA 0.61 0.024 9.91 0.390 5.59 0.220 11.18 0.440 2.79 0.110 7.79 1.75 3.61 0.142 N/A N/A P
LB 024A 01 AAA AAA 0.61 0.024 9.14 0.360 4.06 0.160 9.02 0.355 2.79 0.110 6.67 1.50 4.95 0.195 N/A N/A P
LB 032A 01 C C 0.81 0.032 13.72 0.540 8.38 0.330 13.21 0.520 4.45 0.175 4.45 1.00 8.64 0.340 N/A N/A P
LB 036A 01 D D 0.91 0.036 16.76 0.660 9.14 0.360 18.29 0.720 4.45 0.175 13.35 3.00 4.45 0.175 N/A N/A P
Beryllium Copper – Silver Coated
LBC 028A 01 AA AA 0.71 0.028 9.91 0.390 5.59 0.220 11.18 0.440 2.79 0.110 7.79 1.75 3.61 0.142 N/A N/A S
LBC 028A 01 AAA AAA 0.71 0.028 9.14 0.360 4.06 0.160 9.02 0.355 2.79 0.110 6.67 1.50 4.95 0.195 N/A N/A S
LBC 038A 01 C C 0.97 0.038 13.72 0.540 8.38 0.330 13.21 0.520 4.45 0.175 4.45 1.00 8.64 0.340 N/A N/A U
LBC 040A 01 D D 1.02 0.040 16.76 0.660 9.14 0.360 18.29 0.720 4.45 0.175 13.35 3.00 4.45 0.175 N/A N/A X
192 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
CONTINUOUS LENGTH EXTENSION SPRINGS
MM IN MM IN MM IN N LB MM IN K M S
LEC 014A 12 3.18 0.125 0.36 0.014 304.80 12 0.53 0.12 2.8 71.4 42.1 Y Y
LEC 014A 24
LEC 014A 36
609.60
914.40
24
36
BA
BC
BA
BC Price Group
Outside Diameter LEC 016A 12 0.41 0.016 304.80 12 0.89 0.20 2.5 62.5 75.9 Y Y
LEC 016A 24 609.60 24 BA BA reference to the price list.
arranged through the pages in LEC 016A 36
LEC 018A 12 0.46 0.018
914.40
304.80
36
12 1.33 0.30 2.2 55.5 128.5
BC
Y
BC
Y
LEC 018A 24 609.60 24 BA BA
ascending order of size. LEC 018A 36 914.40 36 BC BC
LEC 020A 12 0.51 0.020 304.80 12 1.78 0.40 2.0 50.0 207.3 Y Y Stiffness
LEC 020A 24 609.60 24 BA BA
Wire Diameter
LEC 020A 36
LEC 022A 12 0.56 0.022
914.40
304.80
36
12 2.00 0.45 1.8 45.4 321.6
BC
Y
BC
Y
factor used to calculate
LEC 022A 24 609.60 24 BA BA
Additional Information
LEC 031C 24 609.60 24 BB BB
LEC 031C 36 914.40 36 BC BE
LEC 034C 12 0.86 0.034 304.80 12 3.78 0.85 1.2 29.4 198.9 Y Y
1 Continuous length extension springs are available in three lengths: 12, 24 & 36 inch.
LEC 034C 24
LEC 034C 36
609.60
914.40
24
36
BB
BC
BB
BE
LEC 037C 12 0.94 0.037 304.80 12 4.45 1.00 1.1 27.0 290.9 Y Y
2 Continuous length extension springs are designed to be cut to the length required by the user.
LEC 037C 24
LEC 037C 36
609.60
914.40
24
36
BB
BC
BB
BE
LEC 041C 12 1.04 0.041 304.80 12 4.67 1.05 1.0 24.3 464.3 Y Y
4
LEC 026D 24 609.60 24 BB BC
Material specification, finishes and tolerances are detailed on the specification page 207.
LEC 026D 36 914.40 36 BC BE
LEC 031D 12 0.79 0.031 304.80 12 1.33 0.30 1.3 32.2 34.0 Y Z
LEC 031D 24 609.60 24 BB BC
5 Please note that the stiffness and initial tension listed in the following extension spring tables relate only
LEC 031D 36
LEC 034D 12 0.86 0.034 2.22
914.40
304.80
0.50 1.2 29.4
36
12 50.6
BC
Y
BE
Z
to music wire. When choosing stainless steel multiply the factors by 0.833.
LEC 034D 24 609.60 24 BB BC
LEC 034D 36 914.40 36 BC BE
LEC 037D 12 0.94 0.037 304.80 12 3.11 0.70 1.1 27.0 72.8 Y Z
6 To determine the spring rate (Newtons per mm of extension) at the final cut length use the following formula:
LEC 037D 24
LEC 037D 36
609.60
914.40
24
36
BB
BC
BC
BE
7 To determine load at an extended length multiply deflection by the spring rate and add initial tension.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 149
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 193
CONTINUOUS LENGTH EXTENSION SPRINGS
MM IN MM IN MM IN N LB MM IN K M S
LEC 014A 12 3.18 0.125 0.36 0.014 304.80 12 0.53 0.12 2.8 71.4 42.1 BB BB
LEC 014A 24 609.60 24 BC BC
LEC 014A 36 914.40 36 BD BF
LEC 016A 12 0.41 0.016 304.80 12 0.89 0.20 2.5 62.5 75.9 BB BB
LEC 016A 24 609.60 24 BC BC
LEC 016A 36 914.40 36 BD BF
LEC 018A 12 0.46 0.018 304.80 12 1.33 0.30 2.2 55.5 128.5 BB BB
LEC 018A 24 609.60 24 BC BC
LEC 018A 36 914.40 36 BD BF
LEC 020A 12 0.51 0.020 304.80 12 1.78 0.40 2.0 50.0 207.3 BB BB
LEC 020A 24 609.60 24 BC BC
LEC 020A 36 914.40 36 BD BF
LEC 022A 12 0.56 0.022 304.80 12 2.00 0.45 1.8 45.4 321.6 BB BB
LEC 022A 24 609.60 24 BC BC
LEC 022A 36 914.40 36 BD BF
LEC 018C 12 6.35 0.250 0.41 0.018 304.80 12 0.44 0.10 2.2 55.5 12.6 BC BC
LEC 018C 24 609.60 24 BD BE
LEC 018C 36 914.40 36 BE BJ
LEC 022C 12 0.56 0.022 304.80 12 0.89 0.20 1.8 45.4 29.6 BC BC
LEC 022C 24 609.60 24 BD BE
LEC 022C 36 914.40 36 BE BJ
LEC 026C 12 0.66 0.026 304.80 12 1.78 0.40 1.5 38.4 61.0 BC BC
LEC 026C 24 609.60 24 BD BE
LEC 026C 36 914.40 36 BE BJ
LEC 029C 12 0.74 0.029 304.80 12 2.45 0.55 1.4 34.4 98.3 BC BC
LEC 029C 24 609.60 24 BD BE
LEC 029C 36 914.40 36 BE BJ
LEC 031C 12 0.79 0.031 304.80 12 3.11 0.70 1.3 32.2 131.9 BC BC
LEC 031C 24 609.60 24 BD BE
LEC 031C 36 914.40 36 BE BJ
LEC 034C 12 0.86 0.034 304.80 12 3.78 0.85 1.2 29.4 198.9 BC BC
LEC 034C 24 609.60 24 BD BE
LEC 034C 36 914.40 36 BE BJ
LEC 037C 12 0.94 0.037 304.80 12 4.45 1.00 1.1 27.0 290.9 BC BC
LEC 037C 24 609.60 24 BD BE
LEC 037C 36 914.40 36 BE BJ
LEC 041C 12 1.04 0.041 304.80 12 4.67 1.05 1.0 24.3 464.3 BC BC
LEC 041C 24 609.60 24 BD BE
LEC 041C 36 914.40 36 BE BJ
LEC 026D 12 9.53 0.375 0.66 0.026 304.80 12 0.98 0.22 1.5 38.4 16.1 BD BE
LEC 026D 24 609.60 24 BE BH
LEC 026D 36 914.40 36 BG BL
LEC 031D 12 0.79 0.031 304.80 12 1.33 0.30 1.3 32.2 34.0 BD BE
LEC 031D 24 609.60 24 BE BH
LEC 031D 36 914.40 36 BG BL
LEC 034D 12 0.86 0.034 304.80 12 2.22 0.50 1.2 29.4 50.6 BD BE
LEC 034D 24 609.60 24 BE BH
LEC 034D 36 914.40 36 BG BL
LEC 037D 12 0.94 0.037 304.80 12 3.11 0.70 1.1 27.0 72.8 BD BE
LEC 037D 24 609.60 24 BE BH
LEC 037D 36 914.40 36 BG BL
194 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
CONTINUOUS LENGTH EXTENSION SPRINGS
MM IN MM IN MM IN N LB MM IN K M S
LEC 039D 12 9.53 0.375 0.99 0.039 304.80 12 3.56 0.80 1.0 25.6 91.5 BD BE
LEC 039D 24 609.60 24 BE BH
LEC 039D 36 914.40 36 BG BL
LEC 041D 12 1.04 0.041 304.80 12 4.00 0.90 1.0 24.3 113.8 BD BE
LEC 041D 24 609.60 24 BE BH
LEC 041D 36 914.40 36 BG BL
LEC 045D 12 1.14 0.045 304.80 12 5.34 1.20 0.9 22.2 171.2 BD BE
LEC 045D 24 609.60 24 BE BH
LEC 045D 36 914.40 36 BG BL
LEC 049D 12 1.24 0.049 304.80 12 6.67 1.50 0.8 20.4 249.6 BD BE
LEC 049D 24 609.60 24 BF BH
LEC 049D 36 914.40 36 BG BL
LEC 052D 12 1.32 0.052 304.80 12 7.79 1.75 0.8 19.2 325.5 BD BE
LEC 052D 24 609.60 24 BF BH
LEC 052D 36 914.40 36 BH BM
LEC 055D 12 1.40 0.055 304.80 12 8.90 2.00 0.7 18.1 418.9 BD BE
LEC 055D 24 609.60 24 BF BH
LEC 055D 36 914.40 36 BH BM
LEC 058D 12 1.47 0.058 304.80 12 11.12 2.50 0.7 17.2 532.9 BD BE
LEC 058D 24 609.60 24 BF BH
LEC 058D 36 914.40 36 BH BM
LEC 034E 12 12.70 0.500 0.86 0.034 304.80 12 1.33 0.30 1.2 29.4 19.8 BE BG
LEC 034E 24 609.60 24 BG BK
LEC 034E 36 914.40 36 BJ BP
LEC 037E 12 0.94 0.037 304.80 12 1.78 0.40 1.1 27.0 28.3 BE BG
LEC 037E 24 609.60 24 BG BK
LEC 037E 36 914.40 36 BJ BP
LEC 041E 12 1.04 0.041 304.80 12 2.22 0.50 1.0 24.3 43.8 BE BG
LEC 041E 24 609.60 24 BG BK
LEC 041E 36 914.40 36 BJ BP
LEC 045E 12 1.14 0.045 304.80 12 3.11 0.70 0.9 22.2 65.3 BE BG
LEC 045E 24 609.60 24 BG BK
LEC 045E 36 914.40 36 BJ BP
LEC 049E 12 1.24 0.049 304.80 12 3.92 0.88 0.8 20.4 94.3 BE BG
LEC 049E 24 609.60 24 BG BK
LEC 049E 36 914.40 36 BJ BP
LEC 055E 12 1.40 0.055 304.80 12 5.78 1.30 0.7 18.1 155.8 BE BG
LEC 055E 24 609.60 24 BH BL
LEC 055E 36 914.40 36 BK BQ
LEC 063E 12 1.60 0.063 304.80 12 8.90 2.00 0.6 16.0 273.3 BF BG
LEC 063E 24 609.60 24 BH BL
LEC 063E 36 914.40 36 BK BQ
LEC 067E 12 1.70 0.067 304.80 12 15.57 3.50 0.6 14.9 372.3 BF BG
LEC 067E 24 609.60 24 BH BM
LEC 067E 36 914.40 36 BK BR
LEC 075E 12 1.91 0.075 304.80 12 22.25 5.00 0.5 13.3 618.3 BF BJ
LEC 075E 24 609.60 24 BH BN
LEC 075E 36 914.40 36 BL BS
LEC 049G 12 19.05 0.750 1.24 0.049 304.80 12 2.63 0.59 0.8 20.4 25.1 BK BM
LEC 049G 24 609.60 24 BN BR
LEC 049G 36 914.40 36 BP BV
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 195
CONTINUOUS LENGTH EXTENSION SPRINGS
MM IN MM IN MM IN N LB MM IN K M S
LEC 055G 12 19.05 0.750 1.40 0.055 304.80 12 3.56 0.80 0.7 18.1 40.9 BK BM
LEC 055G 24 609.60 24 BN BR
LEC 055G 36 914.40 36 BQ BV
LEC 063G 12 1.60 0.063 304.80 12 5.34 1.20 0.6 16.0 70.4 BK BM
LEC 063G 24 609.60 24 BN BS
LEC 063G 36 914.40 36 BQ BX
LEC 069G 12 1.75 0.069 304.80 12 7.12 1.60 0.6 14.5 107.7 BL BP
LEC 069G 24 609.60 24 BN BS
LEC 069G 36 914.40 36 BQ BZ
LEC 075G 12 1.91 0.075 304.80 12 8.90 2.00 0.5 13.3 154.3 BL BP
LEC 075G 24 609.60 24 BP BT
LEC 075G 36 914.40 36 BS BZ
LEC 085G 12 2.16 0.085 304.80 12 12.46 2.80 0.5 11.7 266.3 BL BP
LEC 085G 24 609.60 24 BP BT
LEC 085G 36 914.40 36 BS BZ
LEC 093G 12 2.36 0.093 304.80 12 15.57 3.50 0.4 10.7 395.7 BM BP
LEC 093G 24 609.60 24 BP BT
LEC 093G 36 914.40 36 BT CC
LEC 105G 12 2.67 0.105 304.80 12 26.70 6.00 0.4 9.5 651.2 BM BQ
LEC 105G 24 609.60 24 BQ BV
LEC 105G 36 914.40 36 BT CD
LEC 112G 12 2.84 0.112 304.80 12 35.60 8.00 0.4 8.9 871.0 BM BQ
LEC 112G 24 609.60 24 BQ BV
LEC 112G 36 914.40 36 BT CD
LEC 085JK 12 28.58 1.125 2.16 0.085 304.80 12 8.41 1.89 0.5 11.7 69.6 BN BS
LEC 085JK 24 609.60 24 BS BZ
LEC 085JK 36 914.40 36 BV CG
LEC 105JK 12 2.67 0.105 304.80 12 15.13 3.40 0.4 9.5 164.7 BP BT
LEC 105JK 24 609.60 24 BT CD
LEC 105JK 36 914.40 36 BZ CH
LEC 125JK 12 3.18 0.125 304.80 12 24.52 5.51 0.3 8.0 351.0 BR BV
LEC 125JK 24 609.60 24 BX CE
LEC 125JK 36 914.40 36 CD CJ
196 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
C U S T O M S P R I N G D E S I G N & M A N U FA C T U R E
Springs can be designed to an almost unlimited variety of configurations and over the years Lee Spring has
manufactured literally tens of thousands of ‘custom’ designed springs.
Custom designs are usually considered when either the performance characteristics required (e.g. environmental
conditions, product life cycle, and load capabilities) or physical size and configuration requirements exceed the
scope of what is available from Lee Spring’s comprehensive stock range.
On page 208 you will find a Glossary which will help explain
the terminology used when specifying custom
springs as well as specification forms (from page
198) for several types of common springs.
We have included brief guidelines to further
assist selection.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 197
W A V E S P R I N G S S P E C I F I C AT I O N F O R M
Equal Deflection
LOAD and Load LOAD
Reduced
Operating
Height REDUXTM Wave Spring
Coil Spring
RADIAL
WALL
WIRE
FREE HEIGHT THICKNESS
OPERATES CLEARS
IN HOLE ROD
DIAMETER DIAMETER TURNS
INDICATE UNITS OF MEASURE (IN. & LB.), (MM & N) 9. HOLE DIAMETER__________________________________
DATE TO SUPPLIER:
CUSTOMER CONTACT
198 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
C O N S TA N T F O R C E S P R I N G S S P E C I F I C AT I O N F O R M
If Wf
T B DIA.
DD I.D.
T B DIA. A
I.D. INDICATE UNITS OF MEASURE (IN. & LB.), (MM & N) 8. LIFE CYCLES_______________________________________
DATE TO SUPPLIER:
CUSTOMER CONTACT
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 199
C O M P R E S S I O N S P R I N G S S P E C I F I C AT I O N F O R M
Compression springs are generally specified to work in a bore or over a rod. They
can be supplied with end coils closed and ground square for optimum alignment
and reduced solid height. Springs can also be pre-stressed during manufacture to
maintain length at elevated stress levels.
I II III IV
RH LH
INSIDE DIAMETER
+/-
OR WORKS OVER
OUTSIDE DIAMETER
OR WORKS IN
QUANTITY14.
TO OTHER:
QUOTE FOR ____________________________________________________________________________________________
DATE TO SUPPLIER:
CUSTOMER CONTACT
200 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
C O N I C A L S P R I N G S S P E C I F I C AT I O N F O R M
Conical springs are specified where the large end is designed to work in a bore and
the small end fits over a rod. Springs of this type offer reduced solid height compared
to straight compression springs, especially when they are capable of ‘telescoping’.
I II
FREE LENGTH
INSIDE DIAMETER
+/-
+/-
OUTSIDE DIAMETER
+/-
INDICATE UNITS OF MEASURE (IN & LB), (mm & kg)
1. MATERIAL
INDICATE UNITS OF MEASURE (IN & LB), (MM & N) 8. No. OF ACTIVE COILS
COMPANY:
2. WIRE DIA.
1. MATERIAL 9. TOTAL No. OF COILS
ADDRESS:
3. DIRECTION OF WIND OPT, LH, RH
2. WIRE DIA. 4. END STYLE I, II 10. FINISH
TOWN: POSTCODE:
5. RATE +/- BETWEEN &
3. DIRECTION OF WIND OPT LH RH 11. FREQUENCY OF COMPRESSION CYCLES/SEC
CONTACT:
6. LOAD 1 +/- @
4. STYLE OF END I II PHONE: RANGE
AND WORKING LENGTH 1 TO LENGTH 2
7. LOAD 2 +/- @ 12. OPERATING TEMP °c
FAX:
5. RATE +/- ACTIVE COILS
8. No. OF BETWEEN &
EMAIL:
13. OTHER
9. TOTAL No. OF COILS
6. LOAD 1 +/- @ QUANTITIES TO
10. FINISH BE QUOTED:
7. LOAD 2 +/-OF COMPRESSION@
11. FREQUENCY CYCLES/SEC.
AND WORKING RANGE IN. TO IN. OF LENGTH
END USE OR
o
12. OPERATING TEMP. F APPLICATION :
13.QUOTE
QUANTITY TO OTHER:FOR ____________________________________________________________________________________________
DATE TO SUPPLIER:
CUSTOMER CONTACT
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 201
E X T E N S I O N S P R I N G S S P E C I F I C AT I O N F O R M
Extension springs feature a close wound body with loops on both ends to facilitate
attachment. They are supplied wound with initial tension that can be varied within a
limited range to achieve different loading characteristics. Other features such as loop
diameter, opening and relative position can be modified to ensure a proper fit.
END I II III IV
STYLE MACHINE LOOPS CROSSOVER SIDE LOOPS EXTENDED HOOKS
LOOP
TYPE A LENGTH
B
OPENING
FREE LENGTH
RECOMMENDED LOOP LENGTH.
MIN 1/2 I.D. I.D. I.D. 1.1 x I.D.
MAX 1.1 x I.D. I.D. I.D. AS REQUIRED
ACTIVE COILS
A B
OUTSIDE DIAMETER
+/-
OPENINGS
INDICATE
INDICATE UNITS
UNITS OF MEASURE
OF MEASURE (IN & (IN
LB),&(mm
LB),&(MM
kg) & N) 9. MAXIMUM EXTENDED LENGTH (INSIDE ENDS) WITHOUT SET
o
1. MATERIAL 13. OPERATING TEMP. F
1. MATERIAL
2. WIRE DIA. 14. OTHER:
2. WIRE DIA. 10. RELATIVE LOOP POSITION RANDOM OR ALIGNED
3. DIRECTION OF WIND OPT, LH, RH
4. 3.
ENDDIRECTION
STYLE OF
A WIND
I, II, III, IV OPT
B I, II, LH RH ABOVE)
III, IV (SEE AT
COMPANY: DEGREES +/- DEGREES
5. IT +/- ADDRESS:
4. END STYLE A I II III IV B I II III IV (SEE ABOVE) 11. FINISH
6. RATE +/- BETWEEN &
5. Inital Tension +/- 12. FREQUENCY OF
TOWN: EXTENSION
POSTCODE: CYCLES/SEC
7. LOAD 1 +/- @
CONTACT:
8. LOAD 2
6. RATE +/- +/- @
BETWEEN & AND
PHONE: WORKING RANGE LENGTH 1 TO LENGTH 2
9. MAXIMUM EXTENDED LENGTH (INSIDE ENDS) WITHOUT SET FAX:
7. LOAD 1 +/- @ 13. OPERATING TEMP °c
EMAIL:
11. FINISH
END USE OR
APPLICATION :
12. FREQUENCY OF EXTENSION CYCLES/SEC.
QUANTITY TO QUOTE FOR ____________________________________________________________________________________________
AND WORKING RANGE IN. TO IN. OF LENGTH
DATE TO SUPPLIER:
CUSTOMER CONTACT
202 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
S W I V E L H O O K S P R I N G S S P E C I F I C AT I O N F O R M
Swivel hook springs are best suited to heavy duty or high cycle applications.
Unlike standard extension springs of similar dimension the hooks on these springs
can be designed for optimum life cycle requirements and can also rotate to suit
alignment conditions.
HOOKS
WIRE DIAMETER HOOK ID
HOOK OPENING
1. MATERIAL
2. WIRE DIA.
OUTSIDE DIAMETER
3. HOOK A ID +/- OPENING . +/-
1. MATERIAL COMPANY:
1. MATERIAL
2. WIRE DIA.
ADDRESS:
2. WIRE DIA.
3. DIRECTION OF WIND OPT, LH, RH
9. FINISH
4. ITOF WIND
3. DIRECTION OPT +/- LH RH TOWN: POSTCODE:
5. RATE +/- BETWEEN & 10. FREQUENCY OF EXTENSION CYCLES/SEC
4. Inital Tension +/- CONTACT:
6. LOAD 1 +/- @ AND WORKING RANGE LENGTH 1 TO LENGTH 2
PHONE:
5. RATE 7. LOAD 2 +/- BETWEEN
+/- @ &
FAX:
11. OPERATING TEMP °c
8. MAXIMUM EXTENDED LENGTH (INSIDE ENDS) WITHOUT SET EMAIL:
6. LOAD 1 +/- @
12. OTHER
QUANTITIES TO
7. LOAD 29. FINISH +/- @ BE QUOTED:
10. FREQUENCY OF COMPRESSION CYCLES/SEC.
AND WORKING RANGE IN. TO IN. OF LENGTH
END USE OR
QUANTITY
11.TO QUOTE FOR
OPERATING ____________________________________________________________________________________________
TEMP.
o
F APPLICATION :
12. OTHER:
DATE TO SUPPLIER:
CUSTOMER CONTACT
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 203
T O R S I O N S P R I N G S S P E C I F I C AT I O N F O R M
Torsion springs are designed to operate over a mandrel. They are wound left or right
hand as required to withstand the loads applied. Spring legs are specified to ensure
proper fit and function.
TABLE 1
I II III TABLE 2
DIRECTION OF WIND
BODY LENGTH
LENGTH OF LEG A
A B
F
# OF COILS
+/-
P
1
OUTSIDE DIAMETER
+/- LENGTH OF LEG B
+/-
INDICATE UNITS OF MEASURE (IN & LB), (mm & kg)
1. MATERIAL
INDICATE UNITS OF MEASURE (IN & LB), (MM & N) 8. TORQUE 2
COMPANY: +/- AT 2 °
2. WIRE DIA.
1. MATERIAL ADDRESS:
9. LENGTH OF SPACE AVAILABLE
3. DIRECTION OF WIND LH, RH SEE TABLE 2
2. WIRE DIA. 4. END STYLE A I, II, III, IV, V, VI 10. MAXIMUM WOUND POSITION ° FROM FREE POSITION
SEE TABLE 1 TOWN: POSTCODE:
5. STYLE OF END B I, II, III, IV, V, VI
3. DIRECTION OF WIND LH RH (SEE TABLE 2) 11. FCONTACT: FREE ANGLE OR POSITION
6. RATE +/- PER TURN (360 )
o
o FAX:
5. STYLE OF END 8. BTORQUE
I II 2III IV V VI +/-
(SEE TABLE 1) AT 2 13. FREQUENCY OF ROTATION CYCLES/SEC
EMAIL:
9. LENGTH OF SPACE AVAILABLE
6. RATE +/- BETWEEN PER
o TURN (360°)
AND WORKING RANGE
QUANTITIES TO ° TO °DEFLECTION
10. MAXIMUM WOUND POSITION FROM FREE POSITION. BE QUOTED:
7. TORQUE 1 11. F +/- FREE 1
AT ANGLE OR POSITON
° 13. OPERATING TEMP °c
12. FINISH
END USE OR
13. FREQUENCY OF ROTATION CYCLES/SEC. APPLICATION :
QUANTITY TO QUOTE FOR ____________________________________________________________________________________________
o o
AND WORKING RANGE TO DEFLECTION.
o
14. OPERATING TEMP. F
CUSTOMER NAME: A/C No: ENQUIRY TAKEN BY:
DATE TO SUPPLIER:
CUSTOMER CONTACT
204 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
B AT T E R Y S P R I N G S S P E C I F I C AT I O N F O R M
Battery springs can be configured to meet custom specifications and materials.
When designing Battery springs, determine contact location based on the American
National Standards Institute’s and IEC standard dimensions. Refer to ANSI Standard
C18 and International Electrotechnical Commission IEC86.
______________________________________________________
CUSTOMER NAME: A/C No: ENQUIRY TAKEN BY:
______________________________________________________
DATE TO SUPPLIER:
CUSTOMER CONTACT
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 205
B E L L E V I L L E S P R I N G S S P E C I F I C AT I O N F O R M
When a compression spring application requires a high load in a small space Bellville washers
provide a solution. The conical form of these springs enables them to support high loads with
relatively small deflections and solid heights compared with helical springs. Belleville springs are
often used to solve vibration, thermal expansion, relaxation and bolt creep problems. Lee S
ID OD h
ID h
Ho
t
Ho
t
ARRANGEMENT TYPE
A. Single Disk ARRANGEMENT
B. Parallel TYPE
C. Series D. Series-Parallel
A. Single Disk B. Parallel C. Series D. Series-Parallel
Disks in Disks in
Series: Series:
Disks: Disks:
Disks: Disks: Disks in Disks in
Parallel: Parallel:
Load: Load:
Load: Load:
Load: Load:
@ Deflection Load:
@
@ Deflection @@ Deflection
Deflection Load:
Deflection @ Deflection
Flat@ @ Deflection
Flat FlatFlat Deflection
Flat Flat Flat
Flat
DATE TO SUPPLIER:
CUSTOMER CONTACT
206 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
S P E C I F I C AT I O N S & T O L E R A N C E S
All the 19,000 + different types of Stock springs listed in this All our stock springs are RoHS compliant.
catalogue have been selected to reflect the most popular sizes
ordered. Design and manufacturing tolerances generally follow the
guideline requirements of:
BS EN 2516:1997 or ASTM A967. Standard compression, heavy duty and die springs have ends closed
Zinc plating is in accordance with specification BS EN 12329:2000 or and ground square (tolerance 3°).
ASTM B633 Class Fe/Zn 5 Type III (0.0002" thick with clear chromate) Extension springs have full loops, random position.
and baked for hydrogen embrittlement relief.
Die springs are painted different colours to denote duty: Direction of Helix
Medium Load – Grey Lee Spring Lite Pressure™, compression, die and extension springs
Medium Load Plus – Beige maybe left or right-hand wound at the company's discretion. If
Medium Heavy Load – Purple direction of wind is critical, please specify at time of ordering.
Note:
Other special finishes may be supplied on request at additional cost.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 207
GLOSSARY
Active coils (effective coils, working coils). The coils of a spring Modulus of elasticity. The ratio of stress to strain within the
that at any instant are contributing to the rate of the spring. elastic range.
Buckling. The unstable lateral distortion of the major axis of a NOTE. The modulus of elasticity in tension or compression is also known as
spring when compressed. Young's modulus and that in shear as the modulus of rigidity.
Closed end. The end of a helical spring in which the helix angle Open end. The end of an open coiled helical spring in which the
of the end coil has been progressively reduced until the end coil helix angle of the end coil has not been progressively reduced.
touches the adjacent coil. Outside coil diameter. The diameter of the cylindrical envelope
Compression spring. A spring whose dimension, in the direction of formed by the outside surface of the coils of a spring.
the applied force, reduces under the action of that force. Permanent set (set). The permanent deformation of a spring after
Compression test. A test carried out by pressing a spring to a the application and removal of a force.
specified length a specified number of times. Pitch. The distance from any point in the section of any one coil to
Creep. The change in length of a spring over time when subjected the corresponding point in the next coil when measured parallel to
to a constant force. the axis of the spring.
Deflection. The relative displacement of the ends of a spring under Prestressing (scragging). A process during which internal stresses
the application of a force. are induced into a spring.
Elastic deformation. The deformation that takes place when a NOTE. It is achieved by subjecting the spring to a stress greater than that to
material is subjected to any stress up to its elastic limit. On removal which it is subjected under working conditions and higher than the elastic
of the force causing this deformation the material returns to its limit of the material. The plastically deformed areas resulting from this stress
original size and shape. cause an advantageous redistribution of the stresses within the spring.
Elastic limit (limit of proportionality). The highest stress Prestressing can only be performed in the direction of applied force.
that can be applied to a material without producing permanent Rate (stiffness). The force that has to be applied in order to
deformation. produce unit deflection.
End fixation factor. A factor used in the calculation of Relaxation. Loss of force of a spring with time when deflected to
buckling to take account of the method of locating the end of a fixed position.
the spring. NOTE. The degree of relaxation is dependent upon, and increases with, the
Extension spring. A spring whose length, in the direction of the magnitude of stress, temperature and time.
applied force, increases under the application of that force. Safe deflection. The maximum deflection that can be applied to a
Fatigue. The phenomenon that gives rise to a type of failure which spring without exceeding the elastic limit of the material.
takes place under conditions involving repeated or fluctuating Screw insert. A plug screwed into the ends of a helical extension
stresses below the elastic limit of the material. spring as a means of attaching a spring to another component. The
Fatigue limit. The value, which may be statistically determined, of plug has an external thread, the diameter, pitch and form of which
the stress condition below which material may endure an infinite match those of the spring.
number of stress cycles. Shot peening. A cold working process in which shot is impacted
Fatigue strength (endurance limit). A stress condition under on to the surfaces of springs thereby inducing residual stresses in
which a material will have a life of a given number of cycles. the outside fibres of the material.
Fatigue test. A test to determine the number of cycles of stress NOTE. The effect of this is that the algebraic sum of the residual and applied
that will produce failure of a component or test piece. stresses in the outside fibres of the material is lower than the applied stress,
Finish. A coating applied to protect or decorate springs. resulting in improved fatigue life of the component.
Free length. The length of a spring when it is not loaded. Solid length. The overall length of a helical spring when each and
every coil is in contact with the next.
NOTE. In the case of extension springs this may include the anchor ends.
Solid force. The theoretical force of a spring when compressed to
Grinding. The removal of metal from the end faces of a spring by its solid length.
the use of abrasive wheels to obtain a flat surface which is square
with the spring axis. Space (gap). The distance between one coil and the next coil in
an open coiled helical spring measured parallel to the axis of the
Helical spring. A spring made by forming material into a helix. spring.
Helix angle. The angle of the helix of a helical coil spring. Spring seat. The part of a mechanism that receives the ends of
Hysteresis. The lagging of the effect behind the cause of the a spring and which may include a bore or spigot to centralise
effect. A measure of hysteresis in a spring is represented by the area the spring.
between the loading and unloading curves produced when the Stress (bonding stress, shear stress). The force divided by the
spring is stressed within the elastic range. area over which it acts. This is applied to the material of the spring,
Index. The ratio of the mean coil diameter of a spring to the and for compression and extension springs is in torsion or shear, and
material diameter for circular sections or radial width of cross for torsion springs is in tension or bending.
section for rectangular or trapezoidal sections. Stress correction factor. A factor that is introduced to make
Initial tension. The part of the force exerted, when a close coiled allowance for the fact that the distribution of shear stress across the
spring is axially extended, that is not attributable to the product of wire diameter is not symmetrical. NOTE. This
the theoretical rate and the measured deflection. stress is higher on the inside of the coil than it is on the outside.
Inside coil diameter of a spring. The diameter of the Stress relieving. A low temperature heat treatment carried out at
cylindrical envelope formed by the inside surface of the coils temperatures where there is no apparent range in the metallurgical
of a spring. structure of the material. The purpose of the treatment is to relieve
Loop (eye, hook). The formed anchoring point of a helical spring stresses induced during manufacturing processes.
or wire form. When applied to an extension spring, it is usually Variable pitch spring. A helical spring in which the pitch of the
called a loop. If closed, it may be termed an eye and if partially open active coils is not constant.
may be termed a hook.
208 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
USING MICRONS
Particle of Cigarette Smoke
0.0025mm (0.000098")
od will
h by Particle of Dust
") at a 0.004mm (0.000157")
ge of NOT SHOWN TO SCALE
C
0.0254mm
(0.001")
0.001mm (0.00003937")
THE MICRON
GEOMETRIC SOLUTIONS
The Diameter of a Circle equal in area to a given Square - multiply one side of the Square by 1.12838
The Side of a Hexagon inscribed in a Circle - multiply the Circle Diameter by 0.5
The Diameter of a Circle inscribed in a Hexagon - multiply one side of the Hexagon by 1.7321
The Side of an Equilateral Triangle inscribed in a Circle - multiply the Circle Diameter by 0.866
The Diameter of a Circle inscribed in an Equilateral Triangle - multiply one Side of the Triangle by 0.57735
The Area of a Square or Rectangle - multiply the base by the height
The Area of a Triangle - multiply the Base by half the Perpendicular
The Area of a Trapezoid - multiply half the sum of Parallel sides by the Perpendicular
The Area of a Regular Hexagon - multiply the square of one side by 2.598
The Area of a Regular Octagon - multiply the square of one side by 4.828
The Area of a Regular Polygon - multiply half the sum of Sides by the Inside Radius
The Circumference of a Circle - multiply the Diameter by 3.1416
The Diameter of a Circle, multiply the Circumference by 0.31831
The Square Root of the Area of a Circle x 1.12838 = the Diameter
The Circumference of a Circle x 0.159155 = the Radius
The Square Root of the area of a Circle x 0.56419 = the Radius
The Area of a Circle - multiply the Square of the Diameter by 0.7854
The Square of the Circumference of a circle x 0.07958 = the Area
Half the circumference of a Circle x half its diameter = the Area
The Area of the Surface of a Sphere - multiply the Diameter Squared by 3.1416
The Volume of a Sphere - multiply the Diameter Cubed by 0.5236
The Area of an Ellipse - multiply the Long Diameter by the Short Diameter by 0.78540
To find the Side of a Square inscribed in a Circle - multiply the Circle Diameter by 0.7071
To find the Side of a Square Equal in Area to a given Circle - multiply the Diameter by 0.8862
The information given in this catalogue is as complete and accurate as possible at the time of publication. However, Lee Spring
reserve the right to modify this data at any time without prior notice should this become necessary.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 209
C O N V E R S I O N D ATA
Quantity To convert from To Multiply by
Length Feet (ft) Metres .3048
Millimetres 304.8
Metres (m) Feet 3.2808
Inches 39.3701
Inches (in) Metres 0.0254
Millimetres 25.4
Area Square Inches (in2) Square Millimetres 645.16
Square Millimetres (mm 2) Square Inches 0.00155
Volume Cubic Inches (in 3) Cubic Millimetres 16387.064
Cubic Millimetres (mm 3) Cubic Inches 0.000061024
Force Pounds Force (lbf) Newtons 4.4480
Kilograms Force 0.4536
Newtons (N) Pounds Force 0.2249
Kilograms Force 0.102
Kilograms Force (kgf) Newtons 9.807
Pounds Force 2.2046
Rate Pounds Force per Inch (Ibf/in) Kilograms Force per Millimetre 0.017858
Newtons per Millimetre 0.1751
Newtons per Millimetre (N/mm) Pounds Force per Inch 5.7099
Kilograms Force per Millimetre 0.102
Kilograms Force per Millimetre Newtons per Millimetre 9.807
(kgf/mm) Pounds Force per Inch 55.998
Torque Pound Force-inch (Ibf/in) Kilogram Force-Millimetre 11.52136
Newton-Metre 0.11302
Newton-Metre (Nm) Pound Force-inch 8.84763
Ounce Force-inch 141.562
Kilogram Force-Millimetre 101.937
Kilogram Force-Millimetre Pound Force-inch 0.086796
(kgf/mm) Newton-Metre 0.00981
Ounce Force-inch 1.3887
Ounce Force-inch (ozf/in) Pound Force-inch 0.0625
Newton-Metre 0.007064
Kilogram Force-Millimetre 0.72
Stress Pound Force per Square Inch kgf/mm 0.000703
2
M AT H E M AT I C A L S Y M B O L S
+ plus or positive ≈ approximately equal to √ square root
-- minus or negative ~ of the order of ∞ infinity
± plus or minus, or similar to ∝ proportional to
positive or negative > greater than ∑ sum of
x multiplied by < less than Π product of
÷ divided by > not greater than ∆ difference
= equal to < not less than ∴ therefore
≡ identically equal to ≥ greater than or equal to ∠ angle
≠ not equal to ≤ less than or equal to || parallel to
/ not identically equal to >> much greater than ⊥ perpendicular to
<< much less than : is to
210 Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk
CONDITIONS OF SALE
TERMS: SHORTAGES:
Net 30 days from date of invoice to all accredited All claims for shortages must be filed within 15
customers. All purchases are subject to Lee days from customer's receipt of shipment.
Spring's Standard Terms and Conditions of Sale,
as described below and on our website. No other RETURNS AND RESTOCKING:
terms and conditions apply to any purchase order. All returns require a Return Material Authorisation
All prices are in £ (pound sterling) or € (Euro). For (RMA) number. Returns may incur restocking
non-account holders we accept Master Card (MC) charges.
and Visa.
Please call Lee Spring Customer +44 (0)118 978
CERTIFICATES OF CONFORMITY: 1800 to obtain an RMA number prior to returning
Lee Spring will supply Certificates of Conformity at any merchandise.
no charge.
PRICING:
ADDITIONAL DOCUMENTATION: All Prices are subject to change without notice.
Any additional document requirements must be Prices are based on Lee Spring's standard packaging.
discussed before an order is placed as additional
charges may be payable or parts reclassified as MINIMUM ORDER:
Custom items. 10 of the same Lee Stock Number per item
ordered and £30.00 or €40.00 minimum
POSTAGE: order applies.
Free Postage of Stock Springs to many locations.
SMALL ORDER SHIPPING & PROCESSING CHARGE:
INTERNATIONAL DELIVERIES: Prices for orders of less than £30.00 (€40.00) are
F.O.B. to a UK port or other UK business address. subject to a shipping and handling fee of £12.50
(€15.00). This is charged at our discretion.
Guidance on pricing
See separate Stock Spring Price List
1
After selecting your stock springs from
the catalogue refer to the column headed
‘Price Group’ and note the relevant
2
Using the price list, cross refer the
price group letter(s) to the relevant
quantity column and read off the
letter(s) shown for the material required. price of your springs.
3
Prices for quantities greater than
those covered on the price list are
available on request.
Call: +44 (0)118 978 1800 | Visit: www.leespring.com or www.leespring.co.uk | Fax: +44 (0)118 977 4832 | Email: sales@leespring.co.uk 211
European Headquarters
Lee Spring Limited
Latimer Road, Wokingham,
Berkshire, RG41 2WA, UK
International Locations
NORTH AMERICA MEXICO AND LATIN AMERICA ASIA INDIA
Lee Spring Lee Spring de México Lee Spring (Suzhou) Co. Ltd Lee Spring Company India Pvt. Ltd.
140 58th Street Ave. Apolo 519, Edificio 22 2nd Floor, Building 1, 21/10B, 1st Floor Konankunte Cross,
Unit 3C Parque Industrial Kalos del Poniente 15 Ding Hong Road, Kanakapura Main Road,
Brooklyn, NY 11220 Carretera Monterray-Salltiullo Km.9 Suzhou Industrial Park, Suzhou, Bangalore 560062
USA Santa Catarina, N.L. 66367 Jiangsu China, 215123 India
Phone: 888-777-4647 Phone: 01 (800) 590 0717 (Mexico) Phone: (011) 86 512 6706 7227/8 Phone: (91) 80 49376666
(011) 52 818 308 7070
Fax: 888-462-6655 Fax: (011) 86 512 6706 7225 Fax: (91) 80 49376699
Fax: (011) 52 818 308 7080
Email: sales@leespring.com Email: sales@leespring.cn Email: india-sales@leespring.com
Email: ventas@leespring.com
Rev1 052014