LS Catalog

Leading Solution
LS FTTH Solutions
Highway to the Ubiquitous Life
FTTH Team
12F~17F, LS Tower, 1026-6, Hogye-dong, Dongan-gu, Anyang-si, Gyeonggi-do, 431-080, Korea
www.lscable.com Tel. 82-2-2189-9114
www.lsftth.com
Ⓒ2009 LS Cable, Ltd. All right reserved. This product or document is protected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation.
No part of this product or document may be reproduced in any form by any means without prior written authorization of LS Cable and its licensors, if any.
Products shown on this catalog are subject to change without any prior notice.
Always with our customers
LS Cable is leading the cable, telecommunication industry.
It also represents the LS Group. With its company vision,
“Always with our customers.” LS Cable continuously drives towards
becoming the global leading company providing the technology as
required by customers and the solution that others cannot offer.
Towards the global leading company

All employees of LS Cable stand behind the vision of becoming Your No.1
Creative Partner and are doing their best to realize our customers’
satisfaction. Securing and establishing a firm growth engine, LS Cable will
be reborn as an enterprise to leap worldwide
Leading Solution Electric Power

Business
LS aims to develop into a company that provides its clients with a Leading Solution,
Human communication
connecting minds
contributes to the overall society,
and offers a business environment where the employees can realize their dreams.
Main energy artery
lightening the world
Telecommunication
Business
Awakening and changing

Research &
prime power Development
Broadband Access Fiber Optic Broadband Network
Network Equipment Cable & Connectivity Integration Service
GPON Solution Optical Fibers Consulting Services

• All ITU-T G.984.x Standard compatible • Zero Water Peak Fiber • Suggesting Optimized Business Models
• Layer 2 and Layer 3 Switch functions • Bend Intensity Fiber • Advanced Network Architecture Design
• support full redundancies • Non-Zero DSF • Customizing Services for Customers
• Web-based management • Laser Optimized Multimode Fiber
• support TDM services Constructions
Outdoor & Indoor Cables
• Integrating Various Services
EPON Solution • All areas applicable
• All IEEE802.3ah Standard compatible • Effective Network Deployment
• High-density and Cost-effective Air Blown Solutions • Providing Stable Network Maintenance
• ABF, ABC, Blown Tube Cables
P2P Solution
• Layer2, 3 Switches FTTH Drop Cables
• Aggregate sub-networks • Flexible and Various
• Customer Premise Equipment Passive Optical Solutions
VoIP Solution • Fiber Distribution Hub
• s upport all voice service through • Optical Splitter
Ethernet network • Fiber Optic Splice Closure
• Optical Distribution Frame
• Optical Termination Box
• Fiber Optic Outlet
• Rack & Cabinet
• Field Installable Connector
Introduction • Optical Patch Cords & Adapters
LS Cable is proud to carry total FTTH solution products ranged from Network Core, RAS, Media
Gateways, G-PON, E-PON, Switching Router, IT Security, IP/VPN Service System, NG SDH/SONET
to Home networks solutions as well as diverse Fiber-optic cables, DATA and Coax cables and
OSP materials. With a long history of serving customers in the industry worldwide, we have
been bringing the total solutions and services to the world by integrating data, voice and video
to build the most innovative and reliable networks for world’s Telco Carriers, ISPs, Government
and enterprise market. With outstanding performance and value-added services, we are
confident in creating the best networking solutions to meet customers’ maximum benefits, and
to foster and guarantee a better quality of service
With the fast development on information and networks infrastructure, broadband applications
such as high definition television (HDTV), video on demand (VOD) and etc are getting popular.
Compared with other communication media, optical fiber obviously has superiority because of
its high bandwidth and tremendously low data loss. Due to these advantageous features, it has
been rapidly developed and gradually replacing with copper wire-based transmission system. At
present, the WAN and MAN markets have been saturated with optical fiber and now the LAN
has also been slowly developed towards the optical fiber transmission. Only the network access
speeds between MAN and LAN markets are still slow, which is commonly called the “Last Mile
Bottleneck”. To solve this problem, optical fiber has increasingly penetrated to the customer
premises. Today, everyone knows that optical fiber is a better solution for increasing network
bandwidth
Thus, now we’re going to propose these value added FTTH solutions to help you to achieve your
prospective last mile solution.
In this product literature, we introduce the turn-key solutions from supply, installation to
maintenance of the FTTH/FTTB equipment and other elements of networking that is necessary
to enable the FTTH network
We aim to create a “Leading Solution” for our customers

Realization of FTTx Total Solution by LS Cable
FTTH
(Residential)
Outlet
Field Installable
optical connector
FTTC FTTH Outlet

(multi-residentail)
GPON ONU
ABF Solution Housing AREA
GPON ONT (FTTH, VDSL)
Splitter
Distrlbution
Apt, Area Drop Cable
(FTTH, VDSL)
cabinet
Optical Termination Box
Metro Ring
GPON OLT Closure & Splitter
GPON ONU
Field Installable
optical connector
Optical Distribution Frame

VoIP Gateway
FTTO Fiber Distribution Hub
cabinet
Access Ring
Telephone Co. FOC Solution FDF Patch panel
Router Switch
Distrlbution CATV Co.
Mobile Co.
Closure & Splitter
ANT
Manhole Feeder
Duct
GPON Solution EPON Solution VoIP Solution P2P Solution
LS GPON provides downstream capacity of LS EPON provides various types of Interfaces LS VoIP solution is fully compatible with LS LS P2P solution provides intelligent
2.488 Gbps and an upstream capacity of and it is designed to fit in any service GPON/GPON equipments to complete networking services like advanced QoS,
1.244 Gbps. It is designed to provide high provider’s plan and/or environments. service provider’s faultless Triple Play Service rate limiting, high availability, and security
speed internet service for subscribers and solutions. (VoIP, Video, and Data) to enhance network operations while
optimized environments for service simple network configuration is still
providers. maintained.
Broadband Access Network Equipment

GPON Solution
GPON OLT LST20016 10
GPON ONU LST2024 12
GPON ONT LST402 14
GPON ONT LST110G/111G 15
GPON ONT LST400F 16
GPON ONT LST020G/022G 17
GPON ONT LST442E/422E 18
GPON ONT LST412V 19
GPON ONT LST204A 20
GPON EMS 21
EPON Solution
EPON OLT LSTE9024 22
EPON ONU LSTE2024FE/LSTE400 24
EPON ONU LSTE2024DSL 25
P2P Solution
Router Switch LST3524G 26
VoIP Solution
VoIP Gateway LST320VEF 28
GPON Solution
GPON OLT LST20016
Descriptions Specification
LST20016 GPON OLT is a full carrier-class, future-proof GPON system that provides General Protocols and Standards RFC 2271 SNMP Management frameworks
Ethernet, video, TDM and voice services in a single platform with the open L2/ 3 wire speed forwarding rate 802.1D Bridge standard(STP)1998 edition RFC 1643 Ethernet MIB
architecture to easily accommodate future service requirements. Based on the ASIC Full or half duplex operation 802.1p Priority and Class of Service RFC2233 Interface MIB
standard RFC3195 Syslog
for GPON functionality, it is flexible and efficient solution for the optical last-mile Max. 40 1000Base-X or 1000
Base-T) or Max. 2 ports 10Giga interface 802.1Q VLAN standard Enterprise MIB
network.
40 Ports PON interface 802.1s Multiple STP configuration Web-based Management
3 Built-in fans 1000RPM/26.8CFM 802.1w Rapid STP configuration
Key Features 802.1x Authentication
802.3 10BaseT Ethernet standard Management
Full support of telco-grade power, cooling, reliability and management Switching Architecture 802.3u Fast Ethernet standard RFC 854 Telnet
•Rack-mountable front-access chassis 802.3z Gigabit Ethernet standard RFC 959 FTP
High speed non-blocking switch fabric
802.3ab Gigabit UTP standard RFC 783 TFTP
•Modular design with dual power, built-in FAN, controller & uplink redundancy Store and Forward switching
802.3x Flow control standard RFC 1157 SNMPv1/v2c
•Universal slot for flexible network design 32K MAC address
802.3ad Port trunking RFC 1213 MIB-II
•GPON modularity with SFP type transceiver 4K Active 802.1Q VLAN support
RFC 768 UDP RFC 1493 Bridge MIB
216Gbps switching capacity
Environment-friendly and future-enable system RFC 783 TFTP
RFC 791, 950, 919, 922 IP
•Lower CO2 emission due to minimized power consumption
Features RFC 792 ICMP Physical and Environmental
•Support of user-friendly linux-based EMS RFC 793 TCP
ITU-T G.984 compliant Dimension (WxHxD) :482x399x240(mm)
Scalable architecture RFC 826 ARP
802.1D STP Operating Temperature : 0℃ to 50℃
RFC 854, 855 Telnet
•Non-blocking 216Gbps throughput switching capacity 802.1w RSTP Storage Temperature : -30℃ to 70℃
RFC 959 FTP
•Selective uplink of 10Gbps XFP and 4x1Gbps SFP 802.1s MSTP Humidity : 10% to 90% non-condensing
RFC 1112 IGMP
•Up to 40 GPON port (ex, 2560 subscriber @64 splitting ratio) 802.1Q tagged VLAN Power : 110/220VAC 50/60Hz Free Volt,
RFC 2236 IGMP v2
Q-in-Q Stacked VLAN DC -44 ~ 60VDC
•Support of splitting ratio up to 128 RFC 3376 IGMP v3
IGMP snooping Power Consumption: Max 450W
RFC 1157 SNMP v1, RFC 1905 SNMP v2
QoS management for triple play service IGMP report proxy when option modules populated
RFC 1213 MIB-II
•L2/L3 switching/routing protocol including RIP, OSPF, BGP Broadcast/Multicast storm filtering ETSI (Many ETSI Environmental specs)
RFC 1293 Inverse ARP
Port/ Flow Base mirroring IEC 60950/ EN 60950-1
•Multicast protocol of PIM-SM & IGMP RFC 1305 NTPv3
Per-port MAC address limiting ETSI/EN 300-019–2.3
•Tailor-made S/W feature set including PPPoE intermediate agent, DHCP option82 RFC 1350 TFTP
MAC address filtering ETSI/EN 300-019–2.1
RFC 1492 TACACS+
DHCP Server/ Relay/ Client EN 300 386 V1.3.2
RFC 2328 OSPFv2
DHCP Filtering EN 55022
RFC 1058 RIP v1, 2
NetBIOS, NetBEUI, NBT filtering EN 61000-4-2, 3, 4, 5, 6
RFC 1771 BGPv4
Ordering Information 802.3ad Link aggregation FCC Part 15B
RFC 2131 DHCP
RIPv1,2/ OSPF v2/ BGP4/ IS-IS CE/MIC EMI/EMC compliant
RFC 2474 DiffServ
LST20016 GPON OLT with max. 40 PON ports IP Multicasting (PIM-SM/ SSM, RFC 4601 PIM-SM
Part Name Description IGMP v2/3, RFC 3569 PIM-SSM
SHF LST20016 GPON Shelf with 16 slot and FAN
IGMP Snooping) RFC 2663 NAT
Bandwidth Control (100Kbps unit) RFC 2096 IP Forwarding
SCU Packet switching and CPU management
Rate limiting per port and Flow RFC 2338 VRRP
GPU 4-port GPON ports with SFP type
ACL (Access-Control-List) ISO10589 IS-IS
GEU 4-ports 1000BaseX SFP type
QoS, CoS traffic management RFC 2516
XEU 1-port 10Gbit Ethernet with XFP type CPU protection RFC 1757 RMON MIB (4 groups)
TDU Circuit Emulation with 16 E1 ports
RFC 2021, 2074 RMON II
PSU-AC Power conversion from 110/220VAC to 12VDC
PSU-DC Power conversion from -48VDC to 12VDC
10 LS FTTH Solutions LS FTTH Solutions 11

GPON Solution
GPON ONU LST2024
LST2024 GPON ONU is modular type GPON ONU used in small / medium size business building structures allowing the service General Protocols and Standards Management
provider to select uplink-interface card for each selected service. The uplink-interface contains GPON interface card and Gigabit L2 wire speed forwarding rate 802.1D Bridge standard(STP)1998 edition RFC 854 Telnet
Ethernet interface card. Full or half duplex operation 802.1p Priority and Class of Service standard RFC 959 FTP
24 ports All Fast Ethernet(100Base-T) 802.1Q VLAN standard RFC 783 TFTP
Auto MDI/MDI-X 802.1s Multiple STP configuration RFC 1157 SNMPv1/v2c
2 slot for various type of uplink 802.1w Rapid STP configuration RFC 1213 MIB-II
802.1x Authentication RFC 1493 Bridge MIB
802.3 10BaseT Ethernet standard
Switching Architecture 802.3u Fast Ethernet standard
High speed non-blocking switch fabric 802.3z Gigabit Ethernet standard Physical and Environmental
Store and Forward switching 802.3ab Gigabit UTP standard Dimension (WxHxD) :483x44x240 (mm)
Key Features 16K MAC address 802.3x Flow control standard Operating Temperature : -20℃ to 60℃
4K Active 802.1Q VLAN support 802.3ad Port trunking Storage Temperature : -30℃ to 70℃
Flexible architecture for business user RFC 768 UDP Humidity : 10% to 90% non-condensing
•Rack-mountable main frame with 19” 1RU height RFC 783 TFTP Power : 110/220VAC 50/60Hz Free Volt,
•Modular design with various uplink Features RFC 791, 950, 919, 922 IP Power Consumption: Max 40W
- GPON uplink interface with 2.5G for downstream, 1.25G for upstream ITU-T G.984 compliant RFC 792 ICMP when option modules fully loaded
802.1D STP RFC 793 TCP
- Gigabit uplink interface as 1000BaseT or 1000BaseF
802.1w RSTP RFC 826 ARP
Environment-friendly and cost-effective design 802.1s MSTP RFC 854, 855 Telnet
•Lower CO2 emission due to minimized power consumption 802.1Q tagged VLAN RFC 959 FTP
Q-in-Q Stacked VLAN RFC 1112 IGMP
•24 Built-in 10/100BaseT ports for subscriber
IGMP snooping RFC 2236 IGMP v2
Fully compatible S/W architecture IGMP report proxy RFC 3376 IGMP v3
•Compliant to ITU-T G.984: AES, FEC, DBA, 8 T-cont, 32 Port-ID Broadcast/Multicast storm filtering RFC 1157 SNMP v1, RFC 1905 SNMP v2
Port/ Flow Base mirroring RFC 1213 MIB-II
•L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
Per-port MAC address limiting RFC 1293 Inverse ARP
•Remote OAM: Remote download, Alarm, Optical monitoring
MAC address filtering RFC 1305 NTPv3
Environment-hardened HW DHCP Server/ Relay/ Client RFC 1350 TFTP
•100/220VAC free voltage input (power consumption < 40W) DHCP Filtering RFC 1492 TACACS+
NetBIOS, NetBEUI, NBT filtering RFC 2663 NAT
•Temperature -20~60℃, Humidity 10~90% (Non condensing)
802.3ad Link aggregation RFC 2096 IP Forwarding
IP Multicasting (IGMP Snooping) RFC 2338 VRRP
Bandwidth Control (100Kbps unit) ISO10589 IS-IS
Rate limiting per port and Flow RFC 1757 RMON MIB (4 groups)
ACL (Access-Control-List) RFC 2021, 2074 RMON II
QoS, CoS traffic management RFC 2271 SNMP Management frameworks
CPU protection RFC 1643 Ethernet MIB
RFC2233 Interface MIB
RFC3195 Syslog
Ordering Information Enterprise MIB
Web-based Management
LST2024 GPON ONU with 24 port FE and various uplink card
Part Name Description
LMF LST2024 Main Frame with 24FE and 2 uplink slot
GPM 1-port GPON card for uplink
GEM 1-port 1000BaseT card for uplink
GFM 1-port 1000BaseF card for uplink as SFP type

GPON Solution GPON Solution
GPON ONT LST402 GPON ONT LST110G/LST111G
Descriptions Descriptions
LST402 GPON ONT is wall-mountable residential equipment supporting the both 4 FE and 2 VoIP interface. This model are LST110G/LST111G GPON ONT is wall-mountable residential equipment supporting the 1 FE and 1GE or 1 FE, 1 GE and 2 VoIP
adaptive to deliver IP based service such as high speed data, IPTV, and VoIP. interface, respectively. These model are adaptive to deliver IP based service such as high speed data, IPTV, and VoIP.
Specification Specification
Simple architecture with user-friendly interface Simple architecture with user-friendly interface
•Wall/Desktop mountable indoor ONT (DxWxH) :127x170x40 (mm) •Wall/Desktop mountable indoor ONT (DxWxH) :127x170x40 (mm)
•Support of triple service •Supports triple service
- 4 x 10/100BaseT ports for subscriber - 1 x 10/100BaseT port and 1 x 10/100/1000BaseT port for subscriber
- 2 x VoIP ports for subscriber - 2 x VoIP ports for subscriber
•Remote OAM: Remote download, Alarm, Optical monitoring •Remote OAM: Remote download, Alarm, Optical monitoring
ITU-T G.984 GPON fully complying GPON interface ITU-T G.984 standard fully complying GPON interface LST110G
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+ •SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+
- 2.5Gbps downstream/1.25G upstream (1490nm/1310nm) - 2.5Gbps downstream/1.25G upstream (1490nm/1310nm)
- Min. 20Km length - Min. 20Km length
•Support single T-CONT mode and multiple T-CONTs mode •Support single T-CONT mode and multiple T-CONTs mode
•Support of ASE-128, FEC, DBA and 802.1p mapper service •Support of ASE-128, FEC, DBA and 802.1p mapper service
•Enhanced GPON performance with max. 40 T-cont and 256 Port-ID •Enhanced GPON performance with max. 40 T-cont and 256 Port-ID
•OMCI interface fully meets ITU-T G.984.4 and 983.2 •Standard compliant OMCI interface as defined by ITU-T G.984.4 and G.983.2
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
LST111G
•Up to 256 MAC address and 4 VLAN group •Up to 256 MAC address and 4 VLAN group
•VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q) •VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q)
•MAC address limit and Rate limit •MAC address limit and Rate limit
•IGMP v2/v3 snooping for IP-TV multicast service • IGMP v2/v3 snooping for multicasting IP-TV service
VoIP service connecting to analog telephone with RJ11 connector VoIP service connecting to analog telephone with RJ11 connector for LST111G
•Embedded DSP for two VoIP protocol (H.248 or SIP) •Embedded DSP for two VoIP protocol (H.248 or SIP)
•Multiple codecs including G.711/G.729/G.723.1 •Multiple codecs including G.711/G.729/G.723.1
•5-REN per line, blanced ring at 55V RMS and 54ms Echo cancellation •5-REN per line, blanced ring at 55V RMS and 54ms Echo cancellation
•Support various CLASS services - Caller ID, Call Waiting, Call Forwarding, Call Transfer, Call Toggle, Three Way Calling, Distinctive •Support various CLASS services - Caller ID, Call Waiting, Call Forwarding, Call Transfer, Call Toggle, Three Way Calling, Distinctive
Ringing, etc Ringing, etc
•G.711 for FAX and T.38 FAX •G.711 for FAX and T.38 FAX
Environment-hardened HW Environment-hardened HW
•12V 3A, AC adaptor (Power consumption <15W) •12V 3A, AC adaptor (Power consumption <15W)
•Temperature -5~50℃ pt, Humidity 10~85% (Non condensing) •Temperature -5~50℃, Humidity 10~85% (Non condensing)
•ETSI, CE certified •ETSI, CE certified
Ordering Information Ordering Information

LST402 GPON ONT with 4FE and 2VoIP LST402 GPON ONT with 4FE and 2VoIP
LST110G GPON ONT with 1GEand 1FE LST110G GPON ONT with 1GEand 1FE
LST111G GPON ONT with 1GE, 1FE and 1VoIP LST111G GPON ONT with 1GE, 1FE and 1VoIP

GPON ONT LST400F GPON ONT LST020G/LST022G
LST400F GPON ONT is the wall-mountable residential equipment optimized for LST110G/LST111G GPON ONT is wall-mountable residential equipment
data only subscriber. It is Isupporting the both of 4 FE and 2 VoIP interface. This supporting the 1 FE and 1GE or 1 FE, 1 GE and 2 VoIP interface, respectively.
model are adaptive to deliver IP based service such as high speed data, IPTV, and These model are adaptive to deliver IP based service such as high speed data, IPTV,
VoIP. and VoIP.
Specification
Specification
Simple architecture with user-friendly interface
•Wall/Desktop mountable indoor ONT (DxWxH) :110x160x35 (mm)
•Wall/Desktop mountable indoor ONT (DxWxH) : 110x160x35 (mm)
•Support of triple service
•Support of triple service
- 4 x 10/100BaseT ports for subscriber
- 2 x 10/100/1000BaseT ports for subscriber
- 2 x VoIP ports for subscriber
GPON interface fully compliant with ITU-T G.984 standard •Remote OAM: Remote download, Alarm, Optical monitoring
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+
GPON interface fully compliant with ITU-T G.984 standard
- 2.5Gbps downstream/1.25G upstream (1490nm/1310nm)
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+
- Min. 20Km length
•Support of ASE-128, FEC, DBA and 802.1p mapper service
- Min. 20Km length
•Enhanced GPON performance with max. 8 T-cont and 256 Port-ID
•Support of ASE-128, FEC, DBA and 802.1p mapper service
•Standard compliant OMCI interface as defined by ITU-T G.984.4 and G.983.2
•Enhanced GPON performance with max. 8 T-cont and 256 Port-ID
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping •Standard compliant OMCI interface as defined by ITU-T G.984.4 and G.983.2
•Up to 1K MAC address and 4 VLAN group
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
•VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q)
•Up to 1K MAC address and 4 VLAN group
•IEEE 802.1x port-based and MAC-based network access control
•VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q)
•IGMP v2/v3 snooping/proxy for multicasting IP-TV service
•IEEE 802.1x port-based and MAC-based network access control
•MAC address flood guard for DoS attack prevention
•IGMP v2/v3 snooping/proxy for multicasting IP-TV service
Environment-hardened HW •MAC address flood guard for DoS attack prevention
•5V 2A, AC adaptor (Power consumption <10W) •Classification by L2/L3/L4 field in the packet incoming
•Temperature 0~50℃, Humidity 5~90% (Non condensing) •Marking and remarking of COS, DSCP or IP precedence
•ETSI, CE certified
POTS interface with RJ11 connector for LST022G
•Embedded DSP for two VoIP protocol (H.248, H.323v4 or MGCP)
•Multiple codecs including G.711/G.729/G.723.1
•5-REN per line, blanced ring at 55V RMS
•Max of 64msec fixed, adaptive echo cancellation buffer
•CID, DTMF, VAC, CNF, G.168 & T.38 Fax relay
•G.711 for FAX and T.38 FAX
Ordering Information
Environment-hardened HW
LST400F GPON ONT with 4FE
•5V 2A, AC adaptor (Power consumption <10W)
LST020G GPON ONT with 2GE
•Temperature 0~50℃, Humidity 5~90% (Non condensing)
LST022G GPON ONT with 2GE and 2VoIP

GPON ONT LST442E/LST422E GPON ONT LST412V
As GPON SBU (Single Business Unit) equipment, ONT LST442E/LST422E incorporates interoperability, key customers’ specific LST412V GPON ONT is wall-mountable residential equipment supporting the 4FE, 2VoIP as well as 1 RF video.
requirements and cost-efficiency. Equipped with ITU-T G.984 compliant, supporting both 4FE and VoIP interface including voice,
video, and high speed internet access. To serve the business customers, it also supports E1 transmission over the PON network,
based on CES (Circuit Emulation) technology. Specification
Specification •Wall/Desktop mountable indoor ONT (DxWxH) :200x267x66 (mm)
•Supports triple and TDM service
Simple architecture with user-friendly interface - 4 x 10/100BaseT ports and 2xVoIP ports for subscriber
•Wall/Desktop mountable indoor ONT (DxWxH) :200x267x66 (mm) - 2 or 4 E1 interface for subscriber
- Support of triple service as well as TDM service
- 4 x 10/100BaseT ports and 2xVoIP ports for subscriber ITU-T G.984 standard fully complying GPON interface
- 2 or 4 E1 interface for subscriber •SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+
LST442E - 2.5Gbps downstream/1.25G upstream (1490nm/1310nm)
ITU-T G.984 fully complying GPON interface •Support of ASE-128, FEC, DBA and 802.1p mapper service
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+ •Enhanced GPON performance with max. 8 T-cont and 256 Port-ID
•Support of ASE-128, FEC, DBA and 802.1p mapper service L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
•Enhanced GPON performance with max. 8 T-cont and 256 Port-ID •VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q)
•IGMP snooping for IP-TV multicast service
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping LST422E
•VLAN tagging per Ethernet port and VLAN stacking (Q-in-Q) VoIP service connecting to analog telephone with RJ11 connector
•IGMP snooping v2/v3 for IP-TV multicast service •Embedded DSP for two VoIP protocol (H.248 or SIP)
VoIP service connecting to analog telephone with RJ11 connector •Supports various CLASS services
•Embedded DSP for two VoIP protocol (H.248 or SIP) •CID, CW, CF, CT, Call Toggle, Three Way Calling, etc
•Supports various CLASS services – CID, CW, CF, CT, Call Toggle, Three Way Calling, etc Analog RF video interface with 75Ohm F connector
•Compliant to ITU-T G.984.2 for optical specification
E1 TDM interface with RJ48 connector using CES technology - Wavelength: 1540nm~1560nm and Optical input power: -8 ~ +2dBm
•IETF, MEF and ITU-T standard compliant encapsulation •Full RF range 46MHz~870MHz with 14dBmV
•Conformance with ITU-T G.703 and G.704 •Stability and accuracy
•Multiple timing recovering mode
•Selectable system timing sources when applicable Environment-hardened HW
•Compliant with G.823, ETSI EN 300 912 or G.824 specifications clauses dealing with frequency stability and accuracy •12V 3A, AC adaptor (Power consumption <15W)
Environment-hardened HW •ETSI, CE certified
LST442E GPON ONT with 4FE, 2VoIP and 4 E1
LST422E GPON ONT with 4FE, 2VoIP and 2 E1
LST412V GPON ONT with 4FE, 2VoIP and 1 RF video

Outdoor GPON ONT LST204A GPON EMS
LST204 is located on the subscriber side over the GPON network to provide multiple services LS EMS will provide the service operator centrally monitoring and
such as Internet data service, voice service, video service, IPTV, and CATV overlay. This system management by using fully redundant single application software with the
is adequate for Fiber To The Home (FTTH). required hardware platform (Unix platform) with high availability capability
LST204 is outdoor cabinet type, which basically provides Ethernet 2 ports and POTS (VoIP) 4 of software, application, database and hardware to proactively manage and
ports and mainly installed on the outside of a detached house or a townhouse,. Additionally, monitor all Active EMS network elements, namely the OLT and the ONU
the CATV is available for the option. and its services
Simple architecture with user-friendly interface Management and monitoring of all the NE with following functionalities:
•Wall mountable outdoor ONT •Fault Management
•Support of triple service and optional RF video TDM service •Performance Management
- 2 x 10/100BaseT ports for subscriber •Configuration Management
- 4 VoIP interface for subscriber •Security Management
GPON interface is fully compliant with ITU-T G.984 standard User-friendly GUI interface in unix-based platform.
•SFF type laser compliant with ITU-T G.984.2 Amd1, Class B+ •Topology Management : physical and logical graphical topology view.
- 2.5Gbps downstream/1.25G upstream (1490nm/1310nm) •Resource Management :record the inventory of the network resources and the service creation.
•Support of ASE-128, FEC, DBA •EMS Log Management: record of all network and EMS activities and the security audit trail.
L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q) •Report Form Management: report for fault alarm, network performance, EMS performance, network activities, service creation
•MAC management and port-based rate limiting and security audit trail.
•IGMP v2 snooping for multicasting IP-TV service Centralized operation and maintenance (O&M) of the NE
VoIP service connecting to analog telephone with RJ11 connector •Single EMS platform with In-band management
•Embedded DSP for two VoIP protocol (H.248 or SIP) •Interface and integration with other existing or B/OSS (Business/Operation Support EMS)
•Multiple codecs including G.711/G.729/G.723.1 1+1 active-active server redundancy for high reliability
•Support various CLASS services – CID, CW, CF, CT, Three Way Calling, etc •High Availability (HA) features in primary and secondary location with its connectivity for southbound and northbound interface.
Environment-hardened HW Web based client access
•Water-proof outdoor closure
•Built-in splicing tray
•CE certified
Ordering Information Ordering Information

LST204A Outdoor GPON ONT with 2FE and 4VoIP
UNES2000 LS Element Management System
GPON ONT ODBK Outdoor closure for GPON ONT

EPON Solution
EPON OLT LSTE9024
LSTE9024 EPON OLT is L3 based multi service platform providing flexible General Protocols and Standards ISO10589 IS-IS
number of GEPON ports and GE ports combination up to 24 ports including L2/ 3 wire speed forwarding rate 802.1D Bridge standard(STP)1998 edition RFC 1757 RMON MIB (4 groups)
2 x 10G uplink ports for future migration. Full or half duplex operation 802.1p Priority and Class of Service RFC 2021, 2074 RMON II
8 ports All Giga(1000Base-X or 1000 standard RFC 2271 SNMP Management frameworks
Key Features Base-T or 100Base-Fx) Installed 802.1Q VLAN standard RFC 1643 Ethernet MIB
Auto MDI/MDI-X 802.1s Multiple STP configuration RFC2233 Interface MIB
OLT configuration
20 Ports PON interface 802.1w Rapid STP configuration RFC3195 Syslog
•19” rack-mountable main frame: 482mm x 177(mm) x 280(mm), (W x H x D)
802.1x Authentication Enterprise MIB
•Up to 20 GEPON ports supports for max 640 subscriber accommodation 802.3 10BaseT Ethernet standard Web-based Management
•Flexible GE(Gigabit Ethernet) uplink interface up to 10xGE ports Switching Architecture 802.3u Fast Ethernet standard
•FAN is integrated with main shelf, but it is detachable High speed non-blocking switch fabric 802.3z Gigabit Ethernet standard
Switching & routing function Store and Forward switching 802.3ab Gigabit UTP standard Management
•Non-block 24G L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping 32K MAC address 802.3x Flow control standard RFC 854 Telnet
•L3 routing protocol: RIP v1/v2, OSPF v1/v2, BGP+ 4K Active 802.1Q VLAN support 802.3ad Port trunking RFC 959 FTP
RFC 768 UDP RFC 783 TFTP
•IP multicast with PIM-SM/SSM, IGMP v2/3, IGMP snooping
RFC 783 TFTP RFC 1157 SNMPv1/v2c
•32K MAC address table & 4K 802.1Q VLAN
Features RFC 791, 950, 919, 922 IP RFC 1213 MIB-II
•8 ports /group link aggregation (802.3ad)
802.3ah GEPON RFC 792 ICMP RFC 1493 Bridge MIB
Dual mode operation of GEPON and Turbo GEPON 802.1D STP RFC 793 TCP
•IEEE802.3ah MPCP, OAM compliant 802.1w RSTP RFC 826 ARP
•1.25G(DS)/1.25G(US) GEPON for 32 splits (max. 30Mbps BW allocation for subscriber) 802.1s MSTP RFC 854, 855 Telnet Physical and Environmental
•State-of-art 2.5G(DS)/1.25(US) GEPON for 64 splits 802.1Q tagged VLAN RFC 959 FTP Dimension (WxDxH) :440x325x44 (mm)
Q-in-Q Stacked VLAN RFC 1112 IGMP Operating Temperature : 0℃to 50℃
Network management
IGMP snooping RFC 2236 IGMP v2 Storage Temperature : -30℃ to 70℃
•CLI, telnet & SNMP v1/2 based network control
IGMP report proxy RFC 3376 IGMP v3 Humidity : 10% to 90% non-condensing
•Remote system upgrade using FTP, TFTP protocol
Broadcast/Multicast storm filtering RFC 1157 SNMP v1, RFC 1905 SNMP v2 Power : 110/220VAC 50/60Hz Free Volt,
Environment-hardened HW Port/ Flow Base mirroring RFC 1213 MIB-II DC -42 ~ 54VDC
•AC 200~240VAC or DC -42.5~-56.5V (power consumption < 700W) Per-port MAC address limiting RFC 1293 Inverse ARP Power Consumption: Max 500W
•Temperature 0~40℃, Humidity 20~80% (Non condensing) MAC address filtering RFC 1305 NTPv3 when option modules fully loaded
DHCP Server/ Relay/ Client RFC 1350 TFTP
DHCP Filtering RFC 1492 TACACS+
Ordering Information NetBIOS, NetBEUI, NBT filtering RFC 2328 OSPFv2
802.3ad Link aggregation RFC 1058 RIP v1, 2
LSTE9024 EPON OLT with 4FE, 2VoIP and 1 RF video port
RIPv1,2/ OSPF v2/ BGP4/ IS-IS RFC 1771 BGPv4

Part Name Description IP Multicasting (PIM-SM/ SSM, RFC 2131 DHCP
SHF LST9024 GEPON Shelf with FAN IGMP v2/3,
PIU-E1 1.25G GEPON Line card IGMP Snooping) RFC 2474 DiffServ
PIU-E2 Turbo(2.5G) GEPON Line card Bandwidth Control (100Kbps unit) RFC 4601 PIM-SM
SCU SCU-PC CPU unit Rate limiting per port and Flow RFC 3569 PIM-SSM
SCU-PS Switch unit
ACL (Access-Control-List) RFC 2663 NAT
LIU 4-ports 000BaseX SFP Type
QoS, CoS traffic management RFC 2096 IP Forwarding
XIU 1-port 10G Ethernet XFP type
CPU protection RFC 2338 VRRP
PSU-PA AC power unit
PSU-PD DC power unit

EPON Solution EPON Solution
EPON ONU/ONT LSTE2024FE/LSTE400 EPON ONU LSTE2024DSL
LSTE2024FE provide the EPON uplink and 24FE. LST2024DSL provide the EPON uplink and 24 VDSL lines, respectively.
Specification
Architecture
•19” Rack mounted ONU: 440mm x 280mm x 44mm
•GEPON uplink interface with 1.25G for down and 1.25G for up
•24 x VDSL ports
Key Feature
LSTE2024 LSTE400
•Compliant to IEEE 802.3ah: AES, FEC, DBA
•L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping, STP
Specification •Remote OAM: Remote download, Alarm, Optical monitoring
Architecture •QoS : Classification, Marking/Remarking, SPQ, WRR, WFQ
•19” Rack mounted ONU: 440mm x 280mm x 44mm •DHCP relay
•GEPON uplink interface with 1.25G for down and 1.25G for up Power Supply
•24 x 10/100BaseT ports •220V AC (Power consumption <100W)
Key Feature •Dying Gasp
•Compliant to IEEE 802.3ah: AES, FEC, DBA Operation Environment
•L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping, STP •Temperature -5~50℃, Humidity 10~85% (Non condensing)
•QoS : Classification, Marking/Remarking, SPQ, WRR, WFQ
•DHCP relay
Power Supply
•220V AC (Power consumption <100W)
•Dying Gasp
Operation Environment

LSTE2024FE EPON ONU with 24FE port
LSTE400 EPON ONT with 4FE port
LSTE2024DSL EPON ONU with 24 VDSL port

P2P Solution
Router Switch LST3524G
LST3524G Router Switch is the intelligent Ethernet router General Protocols and Standards RFC 1757 RMON MIB (4 groups)
switch to provide the broadband multimedia service. L2/ 3 wire speed forwarding rate 802.1D Bridge standard(STP)1998 edition RFC 2021, 2074 RMON II
LST3524G support the carrier-class availability, flexible Full or half duplex operation 802.1p Priority and Class of Service RFC 2271 SNMP Management frameworks
scalability and strong security function accommodated by 24 ports All Giga(1000Base-X or 1000 standard RFC 1643 Ethernet MIB
the professional experience. Base-T or 100Base-Fx) Installed 802.1Q VLAN standard RFC2233 Interface MIB
Auto MDI/MDI-X 802.1s Multiple STP configuration RFC3195 Syslog
4 Ports Gigabit(1000Base-T) Combo 802.1w Rapid STP configuration Enterprise MIB
Ports 802.1x Authentication Web-based Management
802.3 10BaseT Ethernet standard
Key Features
802.3u Fast Ethernet standard
Flexible architecture for business user Switching Architecture 802.3z Gigabit Ethernet standard Management
•Rack-mountable main frame with 19” 1RU height High speed non-blocking switch fabric 802.3ab Gigabit UTP standard RFC 854 Telnet
•24 port Gigabit interface with 4 port combo interface Store and Forward switching 802.3x Flow control standard RFC 959 FTP
32K MAC address 802.3ad Port trunking RFC 783 TFTP
Switching & routing function
4K Active 802.1Q VLAN support RFC 768 UDP RFC 1157 SNMPv1/v2c
•L2 bridge/switching: 802.1q(VLAN), 802.1p(4Q), IGMP snooping
RFC 783 TFTP RFC 1213 MIB-II
•L3 routing protocol: RIP, OSPF, BGP
RFC 791, 950, 919, 922 IP RFC 1493 Bridge MIB
•IP multicast with PIM-SM/SSM, IGMP v2/3, IGMP snooping
Features RFC 792 ICMP
•32K MAC address table & 4K 802.1Q VLAN 802.1D STP RFC 793 TCP
•8 ports /group link aggregation (802.3ad) 802.1w RSTP Physical and Environmental
RFC 826 ARP
•802.1w/1s Fast/Multiple Spanning Tree Protocol 지원 802.1s MSTP RFC 854, 855 Telnet Dimension (WxDxH) :440x325x44 (mm)
Traffic & security management 802.1Q tagged VLAN RFC 959 FTP Operating Temperature : 0℃ to 50℃
•Bandwidth management for each port Q-in-Q Stacked VLAN RFC 1112 IGMP Storage Temperature : -30℃ to 70℃
•Prevention of CPU overflow IGMP snooping RFC 2236 IGMP v2 Humidity : 10% to 90% non-condensing
IGMP report proxy RFC 3376 IGMP v3 Power : 110/220VAC 50/60Hz Free Volt,
•Broadcast/Multicast storm control
Broadcast/Multicast storm filtering RFC 1157 SNMP v1, RFC 1905 SNMP v2 DC -42 ~ 54VDC
•MAC, DHCP, NetBIOS, NetBEUI, NBT filtering
Port/ Flow Base mirroring RFC 1213 MIB-II Power Consumption: Max 74W
•MAC address learning limiting per port
Per-port MAC address limiting RFC 1293 Inverse ARP when option modules populated
•Support of TACACS+
MAC address filtering RFC 1305 NTPv3
Network management DHCP Server/ Relay/ Client RFC 1350 TFTP
•CLI & telnet based control DHCP Filtering RFC 1492 TACACS+
•SNMP v1/2c based network control NetBIOS, NetBEUI, NBT filtering RFC 2328 OSPFv2
•Support of MIB-II, RMON MIB, Bridge MIB 802.3ad Link aggregation RFC 1058 RIP v1, 2
•Remote system upgrade using FTP, TFTP protocol RIPv1,2/ OSPF v2/ BGP4/ IS-IS RFC 1771 BGPv4
IP Multicasting (PIM-SM/ SSM, RFC 2131 DHCP
IGMP v2/3, RFC 2474 DiffServ
•100~240VAC free voltage input (power consumption < 72W)
IGMP Snooping) RFC 4601 PIM-SM
Bandwidth Control (100Kbps unit) RFC 3569 PIM-SSM
Rate limiting per port and Flow RFC 2663 NAT
ACL (Access-Control-List) RFC 2096 IP Forwarding
QoS, CoS traffic management RFC 2338 VRRP
Ordering Information CPU protection ISO10589 IS-IS

LST3524G 24 SFP Ports and 4 Ports combo Uplink

VoIP Solution
VoIP Gateway LST320VEF
Descriptions
LST320VEF is the 1.5U rack-mountable voice gateway subsidiary to make
phone call over IP network with various signaling protocol such as SIP, MGCP.
LST320VEF has 2 slots for pluggable I/O interface card for user interface which
is composed of 16 voice port with RJ-11 connector. LST320VEF secures high
quality of voice and provides stable performance. For the purpose of
expanding voice port LST320VEF is cascaded to LST300U ONU and managed
by a GUI based Management System.
Key Features
Flexible architecture for business user
•Rack-mountable main frame with 19” 1.5RU height :193.8mm x 43.7mm x 255.9mm
•Modular design with 2 pl
•2 pluggable I/O slots for VoIP service (Max. 32 port)
•Internal fan controled by temperature sensor
Switching & additional function
•VLAN and bridge feature
•User security by IP access-list
•Remote software upgrade using FTP & TFTP
•IEEE 802.1p packet prioritization
Voice feature
•Various voice codecs: G.723.1, G.729a, G.729b, G.711
•RFC 3261 SIP protocol, H.248 and MGCP
•CID, DTMF, VAD, CNG, G.168 and T.38 G3 Fax Relay
•Max. 32ms fixed, adaptive jitter buffering
•Echo Canceller Length – max. 128ms
•Traffic quering and SNMP MIB v2 for Network Management
•Noise suppression, G.168-2002 Echo cencellation
•Voice quality of over MOS 4.0
LST320VEF VoIP Gateway for business users

Part Name Description
MDU LST320VEF Main Frame with 2 slot
VC16 Voice Card with 16 VoIP interfaces

Optical Fibers and Cables Air Blown Solutions FTTH Drop Cables Connectivity
LS Cable brings you from G652D to G657 LS Cable’s Ez blowing system, our own cost LS Cable’s various types of Drop Cables are LS Cable’s various types of Drop Cables are
Optical Fibers and various Optical Fiber Cables effective and time saving ABF solution, featuring the last mile FTTH network. featuring the last mile FTTH network.
at its best quality simply made the optical network so easy.
Fiber Optic Cable and Connectivity

Optical Fibers and Cables
Zero Water Peak Fiber (G652.D) 32
Bend Insensitive Fiber (G657) 33
Nivzero DSF (G655) 34
Laser Optimized Multimode Fiber 35
Outdoor Cable/Indoor Cable 36
Air Blown Solutions

Air Blown Solutions Overview 38
Air Blown Fiber Unit (EPFU) 40
3.5/5mm Outdoor Micro Duct 42
3.5/5mm Indoor Micro Duct (LSZH) 43
Air Blown Cable (Ez Blow® Micro ABC) 44
Micro Duct (Direct Install) for Ez Blow® Micro ABC 46
Micro Duct (Direct Bury) for Ez Blow® Micro ABC 47
FTTH Drop Cables

Flat Type Drop Cable Overview 48
Flat Type Drop Cable
Figure-8 Type Aerial Drop Cable
Round Type Drop Cable
Connectivity
Fiber Distribution Hub (FDH) 50
Splitter & Panout Splitter 52
Mount Splitter on ODF 53
Fiber Optic Splice Closure 54
Optical Distribution Frame (ODF) 56
Optical Termination Box 57
Fiber Optic Outlet 58
Fiber Distribution Rack 59
Ez-SC, Field Installable Optical Connector 62
Ez-SC Assembly Procedure 63
Optical Patch Cords & Adapters 64
Optical Fibers and Cables Optical Fibers and Cables
Zero Water Peak Fiber (G652.D) Bend Insensitive Fiber (G657)
WAVE-s WAVE-s
•Extremely low water peak •Germanium doped core and silica cladding
•Full spectrum from 1260nm to 1625nm •Dual protective arylate coating applied over fiber
•Designed to cover the entire wavelength •Environmental-proof tested and complying ITU-T Standards
Key Features Key Features

•Long term attenuation reliability by absence of hydrogen aging defects
•Bend Insensitivity at 20Φ bending Maximum bending radius (G652.D vs. G657)
•Excellent geometrical properties for active alignment splicing technique
•Low water peak grade attenuation
•Extremely low PMD performance
•G657.A : Compatible with G652.D
•G657.B : FTTH optimized bending performance
60 G652.D
PMD[ps/ km]
Attennation (dB/km)
0.6
Over 50% More spectrum 0.50
•Optimum dispersion 40Gb/s
0.5 For 10 Gb/s
•Low cost operation 0.20
10Gb/s
0.4 0.10
2.5Gb/s
Average 0.280dB/km 30
0.3 @1383±3nm G657

0.05
0.2
0.03
0.1
1100 1200 1300 1400 1500 1600 0.01
3 5 7
10 10 10 10
Wavelength (nm)
Transmission [km]
The PMD link design value is a term used to describe the PMD of concatenated
lengths of fiber (also known as PMDQ). This value represents a statistical upper limit
for total link PMD. Individual PMD values may change when cabled.
Optical Properties
Optical Properties
1310nm ≤0.34 dB/km
1383nm ≤0.31 dB/km G657.A G657.B
Attenuation 1490nm ≤0.21 dB/km 1310nm ≤0.35 dB/km
1550nm ≤0.20 dB/km 1383nm ≤0.34 dB/km
1625nmâ ≤0.21 dB/km Attenuation 1490nm ≤0.21 dB/km
1310nm (typical) 9.2 ㎛ 1550nm ≤0.21 dB/km
Mode Field Diameter
1550nm (typical) 10.4 ㎛ 1625nm ≤0.22 dB/km
Cutoff Wavelength Cable ≤1260 nm Mode Field Diameter 1310nm (typical) 8.9 8.6 ㎛
1550nm ≤18 ps/(nm·km) Cutoff Wavelength Cable ≤1260 nm
1625nm ≤22 Ps/(nm·km) 1550n ≤18 ps/(nm·km)
Chromatic Dispersion
Zero Dispersion Wavelength 1310~1324 nm 1625nm ≤22 ps/(nm·km)
Slope @λo ≤0.092 ps/(nm2·km) Zero Dispersion Wavelength 1310~1324 nm
ø32mm 1550nm ≤0.03 dB Slope @λo ≤0.092 ps/(nm2·km)
Macrobending Attenuation1turns, 100turns,ø50mm 1310nm & 1550nm ≤0.03 dB Macrobending 1 turn, ø20mm 1550nm ≤0.3 ≤0.05 dB
100turns, ø60mm 1625m ≤0.03 dB Attenuation 1 turn, ø20mm 1625nm ≤1.0 ≤0.2 dB
Link Design Valueâ ≤0.06 ps/√km Link Design Value ≤0.06 ps/√km
PMD PMD
Maximum Individual Fiberâ ≤0.2 ps/√km Maximum Individual Fiber ≤0.2 ps/√km

Optical Fibers and Cables Optical Fibers and Cables
Nonzero DSF (G655) Laser Optimized Multimode Fiber
DreamLightTM GigaTM
LSC DreamLightTM is designed for long-haul, high data rate and high capacity DWDM system. •High performance Laser Optimized MMF produced using sophisticated MCVD process
By optimizing dispersion and effective area, the generation of non-linear effects in 50 GHz channel spacing system is successfully •High bandwidth and low attenuation to ensure attenuation margin in LAN/WAN
surpassed. •Uniform DMD profile for 10Giga data rate
Key Features
DMD~0.17 ps/m
•Provide optimum performance for 10Gb/s 50GHz channel spacing in the C band SAN WAN/MAN LAN Enterprise
Internet Data Cerral/Office
•Make it feasible the next generation 40 Gb/s transmission system Center
-23
•Compatible with future DWDM amplifier regions such as S band DWCM LAN
Switch
•Wide band design provide CWDM application Servers
Fiber Offset(µm)
•Enhanced PMD performance
0
Transmission experiment set-up Eye diagram of ch1 & ch16

DreamLight Enhanced
TM
Switch
ch.1
ch.1 ch.16 23
ch.2 10Gb/s
80
80
80
80
ch.3
10~40km Servers
ch.4
Access 0.0 1.0 2.0 3.0 4.0 5.0
ch.5
DCF DCF Model Delay(ns)
ch.6 Disk Array
ch.7
ch.8 10Gb/s
ch.9 MOD 50 ps/div 50 ps/div
ch.10
ch.11 DCF Measured spectra after 320 km
ch.12
ch.13
10Gb/s PIN Receiver
ch.14
ch.15 Optical Properties
ch.16
1550.92 ~ 1556.55 nm Characteristics Units 50㎛ 62.5um OM3 (50um)

OSNR ~ 25.5 dB
Q-factor > 21dB Attenuation coefficient dB/km
B E R ~ 1 0 -29
850nm ≤2.4 ≤ 2.8 ≤2.4
1300nm ≤0.6 ≤ 0.7 ≤0.6
Bandwidth MHz.km
Optical Properties
Premium
A B 850nm / 1300nm ≥500 / 1000 ≥ 200 / 600 ≥1500 / 500
1550nm ≤0.22 dB/km Standard
Attenuation
1625nm ≤0.24 dB/km 850nm / 1300nm ≥ 400 / 800 ≥140 / 400 ≥400 / 800
Mode Field Diameter 1310nm (typical) 9.6 9.3 ㎛ Laser Bandwidth MHz.km
Cutoff Wavelength Cable ≤1480 nm 850nm ≥2000
1530~1565nm 2~6 5.5~10 ps/(nm·km) Numerical Aperture (typical) 0.2 0.275 0.2
Zero Dispersion Wavelength ≤1520 ≤1440 nm DMD ps/m ≤0.30
Link Design Value ≤0.1 ps/√km 10G Transmission m 300
PMD
Maximum Individual Fiber ≤0.2 ps/√km Distance

Optical Fibers and Cables
Outdoor Cable/Indoor Cable
Outdoor Cable
Type Construction Fiber count Feature Type Construction Fiber count Feature
Figue-8 type optical cables are self-supporting aerial cables that are designed for
The Loose tube designs from LS Cable meet the needs for customer's easy and economical installation.
requirements, and provide excellent performance.
Figure-8 type
Multi Loose Tub 2~576 2~288 The loose tube design provides stable performance over a wide temperature
LS offers various cables with increased fiber density and easy deployment for a range and is compatible with any grade optical fiber.
wide range of installations, including duct, aerial (lashed and self-supporting),
direct buried, and outdoor/indoor.
The LS's Marine and Offshore fiber optic cables is designed especially for the
harsh environments of commercial marine vessels, oil platforms and other similar
Marine &
2~48 applications.
Off-Shore
Ribbon The Central Ribbon Cable designs meet the needs of the variety of applications.
24~432 L ow smoke/zero halogen, flame retardant cables offer the versatility and ease of
CentralLoose Tube
These cables are available in all dry designs with dielectric and metallic sheath. use of our other offshore cables in a construction suited for marine applications.
Indoor Cable
The Central Ribbon Cable designs meet the needs of the variety of applications.
Type Construction Fiber count Feature
Ribbon Ribbon cable can be deployed in a limited space, while streamlining fiber
72~864
Multi Loose termination and saving time and money with easy mass fusion splicing.
These cables are available in all dry designs with dielectric and metallic sheath. S hort Run Office & Computer Room Cabling Patch cords, Pigtails and Jumpers
Simplex &
1 or 2 Equipment Interconnects
Duplex cord
OFNR(riser rated), OFNP(plenum rated) or LSZH(low smoke zero halogen rated)
LS's ribbon slot cable provides excellent optical transmission and physical
performance. Ribbon slot cable is a design that has high tensile strength and
Ribbon Slot 4~1000
flexibility in a compact cable size for use in conduit, direct buried and aerial T Distribution cables are rugged, high performance optical communication cables
applications. Distribution for inside plant installations Backbone & Computer Room Cabling Compact
2 ~ 24
(single Unit) design for limited conduit space OFNR(riser rated), OFNP(plenum rated) or LSZH
(low smoke zero halogen rated)
High capacity & fiber density Advanced "dry"water blocking materials

Virtually gel-free design Rapid installation (small & lightweight) The Central Ribbon Cable designs meet the needs of the variety of applications.
Micro Unit 2~144
Easy break-out of bundles & tubes (QAW) Distribution Ribbon cable can be deployed in a limited space, while streamlining fiber
24 or 144 termination and saving time and money with easy mass fusion splicing.
(Sub Unit)
These cables are available in all dry designs with dielectric and metallic sheath.
istribution cables are rugged, high performance optical communication cables

D
DSS Optical Cables are all-dielectric, self-supporting aerial cables designed for
A for inside plant installations
ADSS easy and economical installation.
2~288 Backbone & Computer Room Cabling
Breakeout 2~12
High modulus aramid yarns provides high tensile strength and long term Compact design for limited conduit space
reliability.
OFNR(riser rated), OFNP(plenum rated) or LSZH (low smoke zero halogen rated)
Direct Termination on 2.0 mm Sub-Unitsns.

Air Blown Solutions
Air Blown Solutions Overview
Air Compressor
Air Compressor
Air Blown Cable
Blowing Head
Blowing Head
Blown tube Cable
Blown tube unit

Blown tube Cable
Direct Install Tub

Cable(in Duct)
Access Chamber
CSSP
Gas-Seal Unit Customer Splice and Spilt
Customer Premises (various capacities)
Internal Customer Lead-In
TELECOM Fibre Optic Cable

to ONU or ONT
External Customer Lead-In
Low Fire Hazard Tube Cable
Exchange, or Optical Node
4DI or 7DI
4DI or 7DI
4DI or 7DI
Direct Bury Tube Cable
4DI or 7DI

Air Blown Solutions
Air Blown Fiber Unit (EPFU)
2 Fiber Unit (with ripcord) Optical Properties

Diameter 1.02 ± 0.06 LWPF Multi Mode Multi Mode Multi Mode Multi Mode
Wavelength
single Mode Single Mode (62.5/125) (50/125) (50/125) (50/125)
Weight 0.90 ±0.05 (nm) (G. 652b)

(G.652d) OM1 OM2 OM3 OM3+
Fibers colors Blue, Orange
850 - - 3.5 2.6 2.6 2.6
Fiber Type SM, 50MMF, 62.5MMF
Maximum 1300/1310 0.38 0.36 1.0 0.8 0.8 0.8
Attenuation
[dB/km] 1383 - 0.36 - - - -
1550 0.28 0.25 - - - -
850nm
- - 200 500 1500 3500
Min. Modal
Bandwidth 850nm
4

Fiber Unit [Mhz.km] Effective - - - 2000 4700
Modal
Diameter 1.02 ± 0.06
Weight 0.90 ±0.05 1300/1310 - - 600 500 500 500
Fibers colors Blue, Orange, Green, Red
Fiber Type SM, 50MMF, 62.5MMF
Mechanical & Environmental Properties
8

Fiber Unit Item Standard Test Condition Performance
PASS
Fiber strain Max. load: ≤ 0.4%
Weight 1.70 ±0.05 9.81 X W N

Tensile Strength IEC 60794-1-2 E1 Residual Fiber strain: ≤ 0.05%
Fibers colors Blue, Orange, Green, Red, Grey, Yellow, Brown, Violet (W: mass of 1km)
No change in Attenuation After test
Fiber Type SM, 50MMF, 62.5MMF No significant damage

PASS
Crush IEC 60794-1-2 E3 100N 60seconds No change in Attenuation After test
No significant damage
ASS
40mm (2 & 4 F)P
Bend IEC 60794-1-2 E11 No change in Attenuation After test
60mm (8 F)
12

Fiber Unit No significant damage
PASS
Cold Test BS EN 60068-2-1 -20 °C 96hrs SMF ≤ ±0.5dB/km (1310, 1550nm)
Weight 2.20 ±0.05
MMF ≤ ±0.25dB/km (850, 1300nm)
Fibers colors Blue, Orange, Green, Red, Grey, Yellow,
Brown, Violet, Black, White, Pink, Turquoise -10 °C ~ 65 °C PASS

Change of
for 10cycles SMF ≤ ±0.07dB/km (1310, 1550nm)
Fiber Type SM, 50MMF, 62.5MMF Temperature BS EN 60068-2-38
(Condensation) RH : 93% MMF ≤ ±0.25dB/km (850, 1300nm)
Cycle Duration: 24Hrs
PASS
-10 °C ~ 60 °C
Temperature Cycle
IEC 60794-1-2 F1 SMF ≤ ±0.07dB/km (1310, 1550nm)
for 3cycles
MMF ≤ ±0.25dB/km (850, 1300nm)
PASS
+20°C ± 2.0°C
Water Immersion
CW 1500 Part4 3.2.4 SMF ≤ ±0.07dB/km (1310, 1550nm)
for 2000Hrs
MMF ≤ ±0.25dB/km (850, 1300nm)

Air Blown Solutions Air Blown Solutions
3.5/5mm Out door Micro Duct 3.5/5mm Indoor Micro Duct (LSZH)
Features & Benefits Features & Benefits

•The tube bundle is protected by a polyethylene sheath with an •The tube cables with flame retardant material
aluminum water barrier bonded inside. •No tensile risk to fibers, since they are installed
2 later, when required-2 Low Smoke Emission
2 2
•No tensile risk to fibers, since they are installed later. and no contains halogens- Low installation
7 tension
3 required 7 3
7 3 7 3
•Can be customized to suit user requirements 1 1 •Can be customized to suit user requirements 1 1
4 6 4
•Low weight, low cost product, with great flexibility 6 4 6 4
6
5 5
•DB bundles have all the advantages of the DI design, but with an 5 5
additional tough sheath that acts like a subduct once buried, with
superior resistance to crush, distortion and corrosion.
Product List and Installation Guide Line (Direct Install)

Product List and Installation Guide Line
Nom. O.D. Min. Bend Tensile Nom. Weight Max. Drum
No. of Tube
(mm) Radius (mm) (N) (kg) Length (m) Nom. O.D. Min. Bend Tensile Nom. Weight Max. Drum
No. of Tube
(mm) Radius (mm) (N) (kg) Length (m)
1 8.4 85 500 50 4000
2 8.5 X 13.5 135 800 78 4000 1 7.4 75 100 35 4000
4 15.4 300 1200 121 4000 2 7.4 x 12.4 150 250 80 4000
7 18.5 280 1700 167 4000 4 14.5 290 400 130 4000
12 23.7 355 2500 247 2000 7 17.4 265 600 195 4000
19 27.8 420 3300 338 2000 12 22.8 345 900 310 2000
24 33.0 500 3800 440 2000
19 26.7 400 1300 440 2000
24 32.5 490 1800 585 2000
Product List and Installation Guide Line (Direct Bury)
Nom. O.D. Min. Bend Tensile Nom. Weight Max. Drum
No. of Tube
(mm) Radius (mm) (N) (kg) Length (m)
1 10.0 85 600 67 4000
2 10.5X15.5 135 800 115 4000
4 19.4 300 1500 162 4000
7 22.3 280 1800 208 4000 Mechanical Properties
12 28.3 355 2700 377 2000
Item Standard Test Condition Performance
19 31.1 420 3500 485 2000
24 36.8 500 4400 560 2000 Applied load
PASS
refer to Tensile
Tensile Strength IEC 60794-1-2 E1 No permanent damage, or localized
above Table
Mechanical Properties 5 minute
diameter reductions greater than 7%

Item Standard Test Condition Performance PASS
300N 60seconds
Applied load No permanent residual deformation
PASS Crush IEC 60794-1-2 E3 then removed.
Wait 1hour
refer to Tensile greater than 15%, no splitting,
Tensile Strength IEC 60794-1-2 E1 No permanent damage, or localized
above Table nor permanent damage
5 minute diameter reductions greater than 7%
Flame retardant IEC60332-1 & 3 PASS
700N 60seconds for PASS Smoke emission IEC61034-1/2 PASS
Direct In stall type No permanent residual deformation
Crush IEC 60794-1 E2 Halogen contents IEC60754-1 PASS
and 1,000N 60seconds for greater than 15%, no splitting,
Acidity IEC60754 PASS
Direct In Bury type nor permanent damage

Air Blown Solutions
Air Blown Cable (Ez Blow® Micro ABC)
Features & Benefits Schematic Air blown cable installation route (96 F Ez Blow™ Micro ABC)
•All dielectric Single Jacket Multi Loose Tube cables are UV-stabilized,
fully water blocked for Micro duct applications.
•Loose tube design provides stable and highly reliable transmission Optical Fiber
Filling Compound
parameters for a variety of voice, data, video and imaging Start
Loose Buffer Tubes
applications. Strength Member
•This lightweight cable offers durability and flexibility required for Water Blocking Yarn
many outside plant uses. Binder Yarn
Ripcord
•RoHS (Restriction of the use of Certain Hazardous Substances Jacket
Bending Diameter : 1.2m
Directive)
•Telcordia GR-20-CORE
End
•IEC 60793 / IEC 60794
Specification Sheet
Items Specifications Route Length Remark
Fiber Counts Max 24 Max 72 96 144 A 150m Straight
Outer Diameter (mm) Nom. 4.5 Nom. 5.8 Nom. 6.8 Nom. 8.9 B, D, F Diameter 1.2m 360°turn in a manhole
Cable Weight (kg/km) 19 28 48 67 C 400m Straight
Minimum Bending Installation 90 120 140 180 E 40m Entering street side cabinet making 180°turn in the cabinet
Radius (mm) Residual 45 60 70 90 G 500m Straight
Maximum Tensile Incidental 450 600 900 1000
Loading (N) Residual 150 150 250 300
Installation -10℃ ~ +40℃ -10℃ ~ +40℃ -10℃ ~ +40℃ -10℃ ~ +40℃
Test Result from Blowing of 96F Ez Blow™ Micro ABC in Test Site (Micro duct size O.D/I.D: 10/8mm)
Temperature Range Operation -40℃ ~ +70℃ -40℃ ~ +70℃ -40℃ ~ +70℃ -40℃ ~ +70℃
Storage -40℃ ~ +70℃ -40℃ ~ +70℃ -40℃ ~ +70℃ -40℃ ~ +70℃
•The micro cable was blown the total length of 1100 m in just over 35 minutes in this test.

•The cable comparing with others in the market has excellent blowing performance.
Sheath material Nylon or HDPE
Fiber Type G.652b & d SMF, 62.5MMF(OM1), 50MMF(OM2, OM3, OM3+)
Installation Speed Time
5.5/7 50
Installation Speed (m/mim)
Time (mim)
120
Recommendation of Duct Size 8/10 10/12 Items Specifications
6/8 8/10 100
(ID/OD mm) 10/12 12/14 40
•PR-140 from Plumettaz with 6.1~6.5mm
8/10 Equipment
80
30 steel tire (U-groove)
1000m 1000m
Blowing Distance 2000m 2000m 60 •KAESER M12E
2000m 2000m 20
40 Compressor - Air capacity (FAD) : 0.82 m³/min
10 - Working pressure : 13.0 bar (g)
20
•Start to install the cable 100m without any air (120m/mim)
0 0
Installation

0 200 400 600 800 1000 1200 •Gradually increase the airflow as shown
method
Shipping Information Distance (m)
in the installation manual

* Graph showing test result from blowing of micro ABC in test site.
Standard Reel Length 4000m
* Other Cable lengths may be available upon request.

Air Blown Solutions Air Blown Solutions
Micro Duct (Direct Install) for Ez Blow® Micro ABC Micro Duct (Direct Bury) for Ez Blow® Micro ABC
Features & Benefits Features & Benefits

•The tube bundle is protected by a polyethylene sheath with an aluminum water barrier •DB bundles have all the advantages of the DI design, but with an additional tough sheath
bonded inside. that acts like a subduct once buried, with superior resistance to crush, distortion and
2 2 2 2
•No tensile risk to fibers, since they are installed later. corrosion.
7 3 7 3 7 3 7 3
•Can be customized to suit user requirements •No tensile risk to fibers, since they are installed later.
1 1 1 1
•Low weight, low cost product, with great flexibility 6 4
•Can be customized to suit user requirements 6 4
6 4 6 4
5 5 5 5
Product List and Installation Guide Line Product List and Installation Guide Line
Tube Size No. of Nom. O.D. Min. Bend Tensile Max. Drum Tube Size No. of Nom. O.D. Min. Bend Tensile Max. Drum
(O.D./I.D.) Tube (mm) Radius (mm) (N) Length (m) (O.D./I.D.) Tube (mm) Radius (mm) (N) Length (m)
1 13.7 150 800 2000 1 13.7 170 1000 2000
2 13.7 X 23.7 150 1200 2000 2 26.6 X 16.6 170 1500 2000
10/8 10/8
4 27.9 420 2000 2000 4 30.9 470 2200 2000
7 33.8 510 2700 2000 7 36.6 560 3000 1000
1 15.4 160 1100 2000 1 20.8 250 1800 2000
2 15.4 X 27.4 160 1800 2000 2 20.8 X 32.8 250 2700 2000
12/10 12/10
4 32.8 500 2700 2000 4 37.8 570 3300 1000
7 39.8 600 3500 1000 7 44.8 680 4700 1000
Mechanical Properties Mechanical Properties
Item Standard Test Condition Performance Item Standard Test Condition Performance
Applied load Applied load
PASS PASS
refer to Tensile refer to Tensile
Tensile Strength IEC 60794-1-2 E1 No permanent damage, or localized Tensile Strength IEC 60794-1-2 E1 No permanent damage, or localized
above Table above Table
diameter reductions greater than 7% diameter reductions greater than 7%
5 minute 5 minute
PASS PASS
700N 60seconds 1000N 60seconds
No permanent residual deformation No permanent residual deformation
Crush IEC 60794-1-2 E3
then removed. Crush IEC 60794-1-2 E3
then removed.
Wait 1hour greater than 15%, no splitting, Wait 1hour greater than 15%, no splitting,
nor permanent damage nor permanent damage

FTTH Drop Cables
FTTH Drop Cable Overview
Figure-8 Type Aerial Drop Cable

- Suitable outdoor application (Aerial Installation)
- Flame Retardant PU or LSZH jacket is available
- Metal or dielectric messenger wire is available
- Field installable connector (Ez-SC) is available
- It is possible to supply Pre-connectorized type
- ITU-T G.657A, B fiber is available
I Mechanical Characteristics
Nominal Nominal Maximum

Fiber Crush Load
Diameter Weight Tensile Load
Count [N/cm]
[mm] [kg/km] [N]
1, 2 5.0 x 2.9 11 1000N 50kg/50mm

Outet
(page 60)
Terminal Box I Environmental Characteristics

(page 표시)
Operation Temperature - 40 to +70°C
Storage Temperature - 40 to +70°C
Patch cord
(page 표시)
Patch cord Drop Cable

(page 63) Filed Installable connector
(page 61)
Round Type Drop Cable
Flat Type Drop Cable - Suitable In/outdoor application
(Duct and Aerial Installation is possible)
- Suitable for Indoor & duct application
- Flame Retardant PU jacket is applied
- Flame Retardant LSZH jacket is applied
- Small size and light weight
- Excellent crush and impact resistance
- Field installable connector (Ez-SC) is available
- Field installable connector (Ez-SC) is available Termination Box
(page 59) - It is possible to supply Pre-connectorized type
- It is possible to supply Pre-connectorized type
Nominal Nominal Maximum
Fiber Crush Load
Nominal Nominal Maximum Diameter Weight Tensile Load
Fiber Crush Load Count [N/cm]
[mm] [kg/km] [N]
Diameter Weight Tensile Load
Count [N/cm]
[mm] [kg/km] [N]
Street Cabinet 1 3.0 8 500 50kg/50mm
1, 2 1.9 x 3.5 10 150 50kg/50mm
PDF (page 표시) I Environmental Characteristics

Rack (page 표시) Closure
I Environmental Characteristics ODF (page 58) (page 56) Operation Temperature - 40 to +70°C
Operation Temperature - 20 to +70°C
Manhole
Closure

Connectivity
Fiber Distribution Hub (FDH)
Descriptions Distribution Type

LS Cable Fiber Distribution Hub is designed to provide a local convergence point
for outside plant FTTH application, housing optical splitters that connect feeder
cables from the central office to distribution cables serving customer premises. The
FDH can accommodate trays for splitter modules, they provide termination and
storage functions. The FDH has splitter capacity for 1x32, 1x16 and dual 1x8
modules. All splitter modules are compatible with all sized of FDH. All components
of the FDH shall be of high quality design, workmanship and finish.
Features
•Intelligent design
FODH Series
•Simple and clearly arranged cable management
•Integrated slack storage spool
•All front access
•Accommodates 12 or 24 splitter modules
•IEC 529 IP-54 Protected
Specification
PARAMETER FODH-288-A FODH-432-A
Dimension(H x W x D) 1100mm x 720mm x 520mm 990mm x 1320mm x 520mm
Max. Capacity 288 432
No. of Splitter Module 12 24
Splitter Module Type 1:4 / 1:8 / 1:16 / 1:32
Cable port(In/Out) 1/2 2/4
Cable Diameter Max.20 mm
Adaptor Type SC / FC
No. of Adaptor 288 432 Splitter Module Specification
Input Parking Lot Max.12 Max.24
Output Parking Lot Max.48 Max.96 Part Number ODFH-SPMD - ① - ②
Material Aluminum Stainless Steel

Material
Mounting Options Ground / Pedestal / Pole Module (*other material available)
Case Dimension 150 x 80 x 15
(L x W x D, mm) (*other type available)
SC/APC
Connector Type
(*other type available)
① Splitter Module type ② Connector type

A : 1:4 SC/PC
B : 1:8 SC/APC
C : 1:16 FC/PC
D : 1:32 FC/APC
* Other type available

Connectivity Connectivity
Splitter & Panout Splitter Mount Splitter on ODF
LS Cable supply high performance PLC (Planar Lightwave Circuit) •Rackmount Type Splitter is FTTH-Ready component and useful to set-up at a rack type system in a central office such as
Splitter Modules which are GR-1209-CORE, GR-1221-CORE Equipment Room (ER) or Telecommunication Room (TR).
requirements compliant. A single mode 1 x N Splitter has one input •There is no need to handle splitter module or optical fiber because all components are inside the frame.
port and output ports (N) for dividing an optical signal. •It includes a splitter inside the rackmount. (4ch, 8ch, 16ch, 32ch available)
Key Features
Key Features •Same as LS’s Panout Splitter
•Fiber Termination/Connection Ports Option
•Low Insertion Loss
•Optical Splice Capability
•Good Uniformity
•Compact Design
•Wide Operation Wavelength Range
•Compatible with most cable management system
•Ultra Small Design
•Low P01 1XN Splitter Chip
Silcon Molding
•GR-1209 & 1221-CORE Compliant Applications
•Fine Tuning of FHD & PECVD
•Same as LS’s Panout Splitter
1ch Silcon Fiber array Lid Nch Slicon Fiber array
Part Number
Applications
FOSP-①-②-③④
•FTTH, FTTB, FTTC
•CATV networks ① Mount type ② In x out
•PON (Passive Optical Network) System S: Splitter 1x4
•Fiber Optic Equipment and System F: PANOUT type splitter 1x8
R: mount Splitter on Rack mount ODF 1x16
W: mount Splitter on wall mount cassette 1x32
C: mount Splitter on closure tray 1x64
Specification Sheet 2x4
2x8
Model FOSP1x4 FOSP1x8 FOSP1x16 FOSP1x32 FOSP1x64 FOSP2x4 FOSP2x8 FOSP2x16 FOSP2x32
2x16
1xN or 2xN 1 x 4 1 x 8 1 x 16 1 x 32 1 x 64 2 x 4 2 x 8 2 x 16 2 x 32
2x32
40 x 4 x 4 50 x 5 x 4 40 x 4 x4
Packing
40 x 4 x 4 or or 55 x 7 x 4 70 x 22 x 8 40 x 4 x 4 or 50 x 5 x 4 60 x 7 x 4
Size (mm)
50 x 5 x 4 55 x 7 x 4 50 x 5 x 4
③ Connector Type ④ Polishing type
N : None SP : PC or SPC (RL ≥40dB) for SM
Return Loss ≥ 55dB
LC : LC Simplex DLC : LC Duplex UP : UPC (RL ≥55dB) for SM
Directivity ≥ 55dB
SC : SC Simplex DSC : SC Duplex AP : APC (RL ≥60dB) for SM
Operating
1.26 ~ 1.60 ㎛ ST : ST Simplex FC : FC Simplex
Wavelength
MU : MU Simplex
Temperature -40 ~ 80℃
Input 250 ㎛ dia. and output/ribbon fiber normal length :
Pigtails
1m or customer specified (un-connectorized or connectorized)

Connectivity
Fiber Optic Splice Closure
Aerial/Manhole/Mounted Closure Dome Type Closure
LS Cable Fiber Optic Closures are designed for efficient and scalable operation. It is meant to be infrastructure solutions for FTTH •Fiber Optic Splice Closures FOSC-D are designed for operational efficiency and
networks. The closure simplifies FTTH network installation, maintenance and management from central office to the each outside scalability for FTTx infrastructure network solutions. The closure simplifies FTTx
plants. The Closures provide for connections between fiber optic cables and passive optical splitters in the outside plant. The network installation, maintenance and management from central office to the each
closure protects fiber optic splicing point and can be mounted to support aerial applications. outside plants.
The special feature of FOSC-S-XX-YY-B/C is easy installation applying handle-locking structure which is non-bolt system to closure
assembly. One-body structure supports easy and fast aerial installation. The cone type gasket allows to adjust the its diameter and •FOSC-D provides connections between fiber optic cables and passive optical splitters
completely protect water. in the outside plant. The closure protects fiber optic splicing point and can be
FOSC-T series is designed to terminate, splice and interconnect fiber optic cables in an outdoor environment. This enclosure mounted to support aerial and duct applications. FOSC-D have high mechanical
accommodates FTTH applications by mounting to the exterior surface of a dwelling and connecting between the feeder cable strength against any environmental conditions and allows rapid network
and distribution cable to individual living units. installation.
FOSC-D Series
Features
•Simple and clearly arranged cable management.
FOSC-S-XX-YY-B/C series FOSC-S-3.3-72-A FOSC-T-3.3-144-A •Engineered fiber routing protects bend radius throughout the unit to ensure signal integrity.
•Enough work space and efficient splicing.
Features •Double-layered sleeve guide
•Qualified to GR-771-CORE for FOSC-S series

•Maximum 16 sc connecter can be mounted for FOSC-S series
•Easy installation, specially for FOSC-S-XX-YY-B/C by applying handle-locking structure
•Accommodate any size of cable diameter
•Compact Design and High Strength
•Connector mounting available
•Environmental conservation structure and material
Specification
Specification
Part Number FOSC-D-5.1-144-A FOSC-D-6.1-288-A
Part Number FOSC-S-3.3-72-B FOSC-S-3.3-192-C FOSC-S-3.3-72-A FOSC-T-3.3-144-A Dimension (H*R) 560mm xø175mm 710mm xø210mm
Dimension(LxWxH) 430 x 190 x 100 430 x 190 x 135 430 x 170 x 110 375 x 340 x 145 Weight 3.5kg 7.0kg
Weight(kg) 3.0 4.2 3.0 8.5 Entrance Single : 5 Oval : 1 Single : 6 Oval : 1
Max. Capacity 72C(144C) 192C(384C) 72C 144C Single : less than ø20mm Single : less than 26mm
Suitable cable dia.
No. of Splice Tray 3 8 3 6 Oval : ø8-28mm Oval : less than 52mm
Splice capacity per tray 24C(48C) Max. No. of Splice tray 6 12

Cable port(In/Out) 3/3(Standard Sheath Gasket) 3/3 Capacity of tray Max : 24 cores
Cable Diameter(In/Out) 8-26mm 8-22mm Max. Capacity 144 288
No. of optical adaptor 16 sc type - Splice method Fusion
Mount to exterior Cable Blocking Heat Shrinkable Tube
Installation Type Aerial / Manhole
surface Material PP, ABS

Optical Distribution Frame (ODF) Optical Termination Box
•LS ODFs (Optical Distribution Frame) provide efficient •LS Cable Optical Termination Box is mounted to outside or
cable connections between outside plant cable and inside wall of building to distribute and connect optical cable for
equipment in the buildings and communication distribution of subscriber. It is designed with controls that
facilities, ODF integrates fiber splicing, storage and maintain the fiber bend radius throughout the unit on the
cable connections together in single unit. The frontal segregated customer and provider sides. For convenient cable
access and the unique adaptor arrangement design FODF-R-S-SC-12 FODF-R-F-FC-24 management, they provide termination, splicing and storage
will increase your work speed and maintenance functions for fiber optic cable systems.
efficiency.
FOTB-I-N-96-A FOTB-I-N-24-A
Application
Application
•Outdoor installation.
•Indoor installation.
•Wall / Pole Mountable Type.
•Rack Mountable Type.
•Distribution point for subscriber.
•FTTH.
•FTTH.
•Data communications.
•Data communications.
FODF-R-D-SC-96 FODF-R-S-SC-144
FOTB-E-N-96-A FOTB-E-N-24-A
Descriptions
Features
•Durable and rust free housings
•Simple and clearly arranged cable management.
•Efficient distribution capacity per unit space
•Engineered fiber routing protects bend radius throughout the unit to ensure signal integrity.
•Easy identification, distribution and connection
•Enough work space and efficient splicing.
•Low loss variation while operation
•Splice tray has 4 way of in/outlet for easy installation.
•All steel constructions except splice tray that is plastic
Part Number FODF-R-S-SC-12 FODF-R-F-FC-24 FODF-R-D-SC-96 FODF-R-S-SC-144 PPart Number FOTB-I-N-96-A FOTB-E-N-96-A FOTB-I-N-24-A FOTB-E-N-24-A
Type Swing Fixed Draw Swing Dimension(mm) 530 x 410 x 170 525 x 600 x 225 250 x 240 x 65 370 x 270 x 100
Dimension Capacity 96 96 24 24
483x310x44 483x310x133 435x310x220 435x310x176
(WxDxH, mm) No. of Splice Tray 4 4 1 1
Fiber capacity 12 fibers 24 fibers 96 fibers 144 fibers Splice capacity per tray 24 24 24 24
Unit 1U 3U 5U 4U Cable port(In/Out) 3/12 12/5 2/2 2/2
Cable port 1 2 3 2 Cable Diameter(In/Out) 8-22mm / 3-6mm Max.8mm 8-22mm 8-22mm
Cable diameter ø8~32 ø8~32 ø8~32 ø8~32 Splice Method Fusion
Number of splice tray 1 1 4 2 Color Ivory Grey Ivory Ivory
Splice tray capacity 12fiber/tray 24fiber/tray Material Steel Aluminum Steel Aluminum
Adaptor type SC/FC FC SC SC Installation Type Wall / Pole
Splice method Fusion Fusion Fusion Fusion

Fiber Optic Outlet Fiber Distribution Rack
Cabinet Rack
Descriptions Description & Application

•LS Cable Fiber Optic Outlet FOOL-SCX-N-X is mounted to All standard 19" cabinets generally conform to (IEC297-Part1,2,3), (EIA RS-310-C), (DIN 41494
inside wall of building to distribute and connect optical cable 100) 19" standard. LS SimpleTM Cabinet Rack provides unsurpassed strength, stability and
for distribution of subscriber. FOOL-SCX-N-X is designed with durability for supporting FDF, patch panels, high-density blocks, cabling and other
controls that maintain the fiber bend radius throughout the telecommunication equipment.
unit on the segregated customer and provider sides. For •ULight Weight
convenient cable management, they support termination, Material : 6063-T5 Aluminum Construction - 5.0T safety glass front door / slide latch type
splicing and storage functions for fiber optic cable systems. side door / 1.2T
The outlet has a simple design and enough work space to steel rear door / side, rear cable bracket / ground bar / caster and level foot
arrange clearly for cable management, and engineered fiber •UFinish : Ivory Powder Coat
routing protect bend radius through the unit to ensure signal FOOL-SC2-N-A FOOL-SC2-R1-A
integrity.
Dimension
Dimension (H x D x W)
No. Part Number
Application H U D W"
1 1,000 18 750 600 (19") LS-CR-1000
•Outdoor installation. 22 750 600 (19") LS-CR-1200
2 1,200
•Wall / Pole Mountable Type. 3 1,400 27 750 600 (19") LS-CR-1400
•Distribution point for subscriber. 4 1,600 31 750 600 (19") LS-CR-1600
•FTTH. 5 1,800 36 750 600 (19") LS-CR-1800
•Data communications. 6 2,000 40 750 600 (19") LS-CR-2000
FOOL-SC2-N-B FOOL-SC8-N-A 7 2,200 45 750 600 (19") LS-CR-2200
Configuration
Specification
Part Number FOOL-SC2-N-A FOOL-SC2-N-B FOOL-SC8-N-A FOOL-SC2-R1-A

Material Plastic
Interface Color White / Grey Top View
Dimension(L x W x D) 93mmx185mmx28mm 90mmx150mmx25mm 135mmx170mmx45mm 120mm x 70mm x 16mm

Capacity 2 FO 8 FO 2 FO / 1 Copper
Fusion splice Fusion splice
Splicing
/ Field Assembly Connector /Field Installable Connector
Radius bending: ≥15 mm
Performance Surplus Fiber Storage Radius bending: ≥30 mm
(G.657 fiber applied)
Adaptor Capacity 2 SC 8 SC 2 SC adaptor
Cable Entry 2 1 2 2(Rear and Bottom)
Applied Cable dia. 3 ~ 6 mm
Installation Type Wall-flat type
Circumstance Operating Temperature -20 ~ +50°C
Application Indoor Indoor use
Front (Inner) View Front View Side View Rear View

Connectivity
Fiber Distribution Rack
Open Rack Rack Management
Description & Application

All standard 19", 23" rack generally conform to (IEC297-Part1,2,3), (EIA RS-310-C), (DIN 41494
100) 19" standard. LS SimpleTM Open Rack provides unsurpassed strength, stability and
durability for supporting FDF, patch panels, high-density blocks, cabling and other
telecommunication equipment. Available various accessories.
•ULight weight
Material : 6063-T5 Aluminum Construction. All 2 post vertical frames / 3.0T insulated plate / 19", 1U (2Hole, 4Hole) Front Filler Plate (1, 2, 3, 4, 5, 6U) Rear Cable Bracket 19｡ｱ Rack Type
ground bar / rear cable bracket Improve Cable Routing Rear Cable Arrangement Fixed 110 Block, 25 & 50P and
Jumper Trough (1U)
•UOptions
Rack Support(Min. 600 ~ Max.1200 mm)
Plinths (H200, 250, 300mm)
Vertical Cable Management
Cable Bracket and Panels
•UFinish : Black Powder Coat
Dimensions
Dimension (H x D x W)
No. Description Part Number
H U D W” 19" Rack Type Surge Protector BRT Ringrun Panel 19" Wire Cable Bracket
Fixed 110 Block, 100P 19", 23" Rack Type 19", 23" Rack Type 19" Rack Type 1U
1 Open Rack 19" 1,800 36 360 600 (19") LS-OR-19-1800
Jumper Trough (2U, 4U, 6U) Improve Cable Routing (1U, 2U) Improve Cable Routing
2 Open Rack 19" 2,000 40 360 600 (19") LS-OR-19-2000
3 Open Rack 19" 2,200 46 360 600 (19") LS-OR-19-2200
4 Open Rack 23" 1,800 36 360 700 (23") LS-OR-23-1800
5 Open Rack 23" 2,000 40 360 700 (23") LS-OR-23-2000
6 Open Rack 23" 2,200 46 360 700 (23") LS-OR-23-2200
7 Vertical Rack 1,800 - 160 150 LS-VR-1800
23" 110 Block Wire Bracket Shelf Ground Bar (100mm) Cable Duct
Configuration Fixed 110 Block 300P 19" Rack Type (D300mm) Grounding, Included Insulator Vertical Cable Routing
(Leg Type)
200
W 100
A60635-T5 t=7.0
Open-Rack
H
A60635-T5 t=4.0 Rack Supporter Plinth Power Strip

Open Rack Supporter Open Rack Plinth 15A, 110/220V
Min. 600 ~ Max. 1200 mm (H200, 250, 300 mm)
A60635-T5 t=7.0
300
Open-Rack

Ez-SC, Field Installable Optical Connector Ez-SC Assembly Procedure
Descriptions
•Easy installation in the field without adhesive & polishing
•Compatible with conventional SC connector
•Performance exceeds ANSI/TIA/EIA-568-A
•Telcordia GR-1081-CORE
1. Boot insert in cable as above 2. Stripping coating around 20mm 3. Inserting cord after cleaning alcohol and fiber cutting(10mm) using tool
picture
Key Features
•Easy operation & Quick assembly EZ-SC(UPC/APC)
•Connector & fiber re-use available
•Neither adhesive nor polishing necessary
•Additional tool does not necessary
•Can be installed to 0.25mm, 0.9mm and 3.0mm cord
4. Inserting connector to Assembly tool 5. Inserting cable(fiber) until bending

occurs (important)
Specification
Item PCA PC 50 APC 60 NOTE 1)
Insertion Loss
(against master plug) ≤ Max. 0.5dB ≤Max. 0.5dB ≤ Max. 0.5dB
Return Loss ≥ 45 ≥ 50 ≥ 60
Cable retention ≥10N
0.25mm fiber, 0.9mm tight buffer,
Application cable diameter
3.0mm cord or cable, 2.0mm Flat type cable
IEC61754-4
Standard
GR-1081-CORE 6. Push push-holder toward front 7-1. Connect Ez-SC to patch cord and beaming light (SUCCESS)
Operation Temperature -40℃ ~ 70℃ 7-2. Connect Ez-SC to patch cord and beaming light (FAILUER)
* Note 1) 3.5° Cleaving Modify
Specification Sheet
FOFC-①-②-③
① Connector Type ② Polishing type ③ Cable outer Diameter
SC : SC connector PC : PC type 025 : Fiber
8. Inserting boot 9. Inserting housing 10. Connection completed
LC : LC connector A5 : APC type (Return 090 : 900㎛ Tight buffer
loss ≥ 50) 200 : 2.0mm Flat
A6 : APC type (Return 300 : 3.0mm cord
loss ≥ 60)

Connectivity
Optical Patch Cords & Adaptor
SC type Patch Cord & Adaptor Performance requirements for Optical Patch Cord
Connector type Fiber Type SM (1310/1550nm) MM (850/1310nm)
Polishing Type SPC UPC APC PC
SC, ST, FC Insertion Loss ≤ 0.3 dB ≤ 0.4 dB
Return Loss ≥ 40 dB ≥ 55 dB ≥ 60 dB ≥ 25 dB
Polishing Type SPC UP PC
LC, MU Insertion Loss ≤ 0.3 dB ≤ 0.4 dB
Return Loss ≥ 40 dB ≥ 55 dB ≥ 25 dB
Polishing Type SPC PC
•The most popular connector with 0.25mm diameter ferrule MT-RJ Insertion Loss ≤ 0.75 dB ≤ 0.75 dB
•Used in a wide range of application Return Loss ≥ 40 dB ≥ 25 dB
•Push-on design makes easy to connect or dis-connect
Note : SPC(Super Physical Contact), UPC(Ultra Physical Contact), APC(Angled Physical Contact)
•RoHS compliant
LC type Patch Cord & Adaptor
Part Number Information

Adapter Patchcord
•Small form factor (SFF) connector with 1.25mm diameter ferrule FOAD-①-②-③ FOPC-① ④-①④-⑤⑥⑦-⑧
•Used in a wide range of application
① Adapter/Connector Type ② Sleeve Material ④ Polishing Type
•Simple push-on design same as RJ45 connector
LC : LC Simplex DLC : LC Duplex PB : Phosphor Bronze PC : PC for MM
•RoHS compliant SC : SC Simplex DSC : SC Duplex ZC : Zirconia Ceramic SP : SPC for SM
ST : ST Simplex FC : FC Adapter OO : No Alignment Sleeve UP : UPC for SM
MU : MU Simplex MTRJ : MTRJ Adapter AP : APC for SM
BICON : Biconic Adapter ③ Housing Material
FC type Patch Cord & Adaptor PIG: Open (pigtail) P : Plastic Housing
M : Metal Housing
⑤ Fiber Type ⑥ Cable Type ⑦ Cable Outer Diameter

SC : Conventional Single Mode Fiber (G.652B) S : Simplex Cord 09 : 0.9mm Tight Buffer
SE : Enhanced Single Mode Fiber (G.652D) Z : Duplex Zipcord 16 : 1.6mm Sheath Cable
BE : Bend Insensitive Fiber (G.657) 18 : 1.8mm Sheath Cable
MC 50MMF Conventional ⑥ Jacket Material 20 : 2.0mm Sheath Cable
MG : 50MMF Giga Grade (OM2) V : PVC 24 : 2.4mm Sheath Cable
MX : 50MMF 10 Giga Grade (OM3) Z : LSZH 30 : 3.0mm Sheath Cable
•Screw-coupled connector
HC : 62.5MMF Conventional (OM1)
•Unsed in a wide range of application ⑥ Jacket Material
HG : 62.5MMF 1 Giga Grade
•RoHS compliant V : PVC
Z : LSZH

LS FTTH Activities
LS Cable is a proud vendor member of the Full Service Access Network Group, FSAN which is an interest group for
the world's leading telecommunications services providers, independent test labs, and equipment suppliers to work
towards a common goal of truly broadband fiber access networks. The Mission of FSAN is to drive applicable
standards, where they already exist, into the services and products in the industry, while simultaneously advancing its
own specifications into the appropriate standard bodies to provide further definition to the Full Service Access
Network. FSAN has more than 50 members representing the leading implementers of Gigabit rate G-PON and
B-PON Passive Optical Networking. LS Cable has been actively testing Interoperability and Assessing the
Implementation of ITU G.984 Standards, and also participating to establish Standards for FSAN members.
As a proud foundation member of FTTH council Asia Pacific, LS Cable has been enthusiastic board member FTTH Leading
representing all areas of broadband industries, including telecommunications, computing, networking, system
integration, engineering and content-provider companies, as well as traditional telecommunications service
Solution Provider
providers, utilities and municipalities. Our aim is to educate, promote and accelerate FTTH and resulting economic
and quality of life enhancements.
ASIA PACIFIC
Vendor Member Foundation Member

Test Interoperability and Assess the BoD Member
Implementation of ITU G.984 Standards Regional Committee Technical Committee
Participates establishing FSAN Committee Market Development Committee
Standards

Products & Systems of LS Cable
Power Transmission & Distribution System Telecommunication System

Extra High Voltage Cable System Optical Fiber
Overhead Transmission Line System Optical Fiber Cable
OPGW I Busduct System RF Feeder Cable
Onshore & Offshore Cable System LAN Cable
Medium & Low Voltage Cable FTTH
Control & Instrumentation Cable HFC (Hybrid Fiber Coaxial Cable)
Global Network

LS Catalog

Uploaded by

Document Informationclick to expand document informationLS Cable is leading the cable, telecommunication industry. It also represents the LS Group. LS Cable aims to develop into a company that provides its clients with a leading Solution.

Document Informationclick to expand document information

Copyright:

Available Formats

LS Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

LS Catalog

Uploaded by

Copyright:

Available Formats

Leading Solution

Towards the global leading company

Leading Solution Electric Power

Awakening and changing

GPON Solution Optical Fibers Consulting Services

Introduction • Optical Patch Cords & Adapters

We aim to create a “Leading Solution” for our customers

FTTC FTTH Outlet

Optical Distribution Frame

Distrlbution CATV Co.

Broadband Access Network Equipment

10 LS FTTH Solutions LS FTTH Solutions 11

12 LS FTTH Solutions LS FTTH Solutions 13

Ordering Information Ordering Information

14 LS FTTH Solutions LS FTTH Solutions 15

16 LS FTTH Solutions LS FTTH Solutions 17

18 LS FTTH Solutions LS FTTH Solutions 19

Ordering Information Ordering Information

20 LS FTTH Solutions LS FTTH Solutions 21

22 LS FTTH Solutions LS FTTH Solutions 23

24 LS FTTH Solutions LS FTTH Solutions 25

26 LS FTTH Solutions LS FTTH Solutions 27

28 LS FTTH Solutions LS FTTH Solutions 29

Fiber Optic Cable and Connectivity

Air Blown Solutions

FTTH Drop Cables

Key Features Key Features

0.3 @1383±3nm G657

32 LS FTTH Solutions LS FTTH Solutions 33

Transmission experiment set-up Eye diagram of ch1 & ch16

1550.92 ~ 1556.55 nm Characteristics Units 50㎛ 62.5um OM3 (50um)

34 LS FTTH Solutions LS FTTH Solutions 35

High capacity & fiber density Advanced "dry"water blocking materials

 istribution cables are rugged, high performance optical communication cables

36 LS FTTH Solutions LS FTTH Solutions 37

Air Blown Cable

Blown tube unit

Direct Install Tub

Internal Customer Lead-In

TELECOM Fibre Optic Cable

Low Fire Hazard Tube Cable

Exchange, or Optical Node

Direct Bury Tube Cable

38 LS FTTH Solutions LS FTTH Solutions 39

2 Fiber Unit (with ripcord) Optical Properties

Mechanical & Environmental Properties

40 LS FTTH Solutions LS FTTH Solutions 41

Features & Benefits Features & Benefits

Product List and Installation Guide Line (Direct Install)

42 LS FTTH Solutions LS FTTH Solutions 43

Installation Speed (m/mim)

44 LS FTTH Solutions LS FTTH Solutions 45

Features & Benefits Features & Benefits

Mechanical Properties Mechanical Properties

46 LS FTTH Solutions LS FTTH Solutions 47

Figure-8 Type Aerial Drop Cable

Nominal Nominal Maximum

1, 2 5.0 x 2.9 11 1000N 50kg/50mm

istribution cables are rugged, high performance optical communication cables

4. Inserting connector to Assembly tool 5. Inserting cable(fiber) until bending