Model type:

IDL500EU.2
Commercial code:
40885
 General notes

Technical Documentation guidelines

----------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------
You can find herewith some generic information to simplify cunsulting of technical documentation:

1. Models of same range share the same exploded views, which report the richest set of spare parts:generally, a model does not
necessarly have a related spare part for each particular shown on exploded views.

2. Some spare parts can not be represented directly on the exploded views (instruction booklets, specific kit, etc...). You can find
those codes in the spare parts list with the same reference of particular where spares are installed or with references 099, 999.
Instruction booklets, once managed, appear with 000 reference.

3. On the higher right site of each exploded view there is a serial number which indicates the beginning of the production of
certain range:some models might have more than an exploded view for a given category, each distinguished by a different serial
no.and linked to another spare parts list, In this case, serial no. is required to supply the right spare part code. Exploded view to be
considered is the one with a more recent serial no. but previous than the one of the model that needs assistance.

4.Exploded views might require further updates even after publishing. Addition of new spares will go on following the already
existing numeration references. Revision number of an exploded view is shown into last four digits of serial number into upper
right hand corner.

5.The spare parts list associated to an exploded view shows related codes of spares managed for a certain model; for each spare
part other informations are available:

REF: reference no of spare into a table; SUBSTITUTE: list of spare(s) which can replace a code but that keeps same functional
characteristics

INDUSTRIAL CODE: list of variables of a model (shown into model label) where such spare is used; NOTICE: code of
information(s) to refer to complete technical intervention, track for changes or to find correct spare part code.

6. Some notices, into a same section are generic therefore cannot be directly linked to a spare part. In order to assist a model in
the best way as possible, it is helpful to pay attention to all notices and constantly verify documentation updates

7.Technical documentation cover shows model name and its commercial codes

mod.IDL500EU.2 page 2
2220110 Exploded views

mod.IDL500EU.2 page 3
2220110 Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

000 C00143764 instruction book it-gb-fr-de-nl-es-
000 C00143765 instruction book pl-bg-hr-sr-sl-el-
001 C00092417 1 x C00093154 left side panel lh polar
002 C00075715 rear cover
003 C00033591 rear support - top
004 C00142986 cover white(pw) 'indesit evo3'
005 C00057504 hook - top cover retention
006 C00085024 catch plate (cabinet)
007 C00141317 top and side door seal (1638mm)
009 C00092418 1 x C00093154 right side panel polar
010 C00094117 rail back stop evo3
011 C00094116 1 x C00094112 basket runner - upper evo3
012 C00094112 runner assembly
013 C00094118 runner end stop
014 C00108980 upper basket noclik/clak markii
015 C00053522 flap upper basket white27
016 C00056397 1 x C00054825 lower basket 'lsv61ix'
017 C00091600 rear support - middle
018 C00091601 lower rear support hot or cold
019 C00143383 radio interference suppressor rohs
020 C00054830 drain hose fastener
021 C00143005 plinth panel swell
022 C00109991 adjustable foot
023 C00056010 foot support x
024 C00092555 foot 155mm
025 C00118842 tray on bottom of tub 60cm
026 C00119016 front support lower 60cm npe
029 C00079013 door spring adjuster
030 C00054932 frame support for tub seal 60cm n1045047
032 C00104638 basket roller axis
033 C00056347 lower basket wheel
034 C00078869 cutlery basket divider
035 C00094191 1 x C00109840 upper basket roller evo3
036 C00094189 roller axle upper basket
038 C00079023 cutlery basket

mod.IDL500EU.2 page 4
2220110 Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

042 C00054833 top for front support

mod.IDL500EU.2 page 5
2220210 Exploded views

mod.IDL500EU.2 page 6
2220210 Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

001 C00054925 upper was basket guide casing
002 C00144315 top spray arm nut with seal (rohs)
003 C00110526 water supply distribution assembly
004 C00110527 upper wash arm feed pipe
005 C00075746 upper wash arm curved set
006 C00143371 1 x C00280937 supply cable schuko rohs
007 C00009415 1 x C00144176 mains inlet hose hot 1500mm
010 C00097871 lock nut m8 + washer 'lvs'
011 C00063792 seal o-ring
012 C00063791 temperature sensor
013 C00041086 thermostat safety 78ønc (dw)
015 C00054863 1 x C00142344 central filter
016 C00145075 stainless steel outlet filter
017 C00081164 1 x C00142344 filter cylindrical
018 C00061929 outer fine rotating polyester filter
019 C00054854 sump fixing ferrule
021 C00143766 drain pump (td)
022 C00054869 drain hose
023 C00081162 container - overflow unit
024 C00143107 microswitch acquastop rohs
025 C00058843 float - overflow unit
026 C00095801 pressure hose clip evo3
027 C00094154 pipe pressostat lvs evo3
028 C00143740 pressure switch 90 71 evo3 rohs
029 C00111855 1 x C00115348 tube water inlet electrovalve/air-
030 C00094171 water softener adjustable evo3
032 C00144235 retaining ring - softener rohs
033 C00041088 salt cap
034 C00005819 salt funnel
035 C00055005 pump cover
036 C00054868 tube - softener/sump l.(480mm)
038 C00110611 inlet valve
039 C00086801 protection electrovalve
040 C00076628 tub spring
041 C00076627 wash motor/pump assy 220v-60w

mod.IDL500EU.2 page 7
2220210 Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

042 C00094159 60903... overflow connector evo3
042 C00196353 60904... overflow connector evo3
043 C00075695 connection gasket overflow
044 C00143580 60903... bodytop overflow evo3 rohs
044 C00196352 60904... 1 x C00094159 bodytop overflow evo3 rohs
1 x C00143580
045 C00054917 seal 'o'ring (23,81x2,62)
046 C00094143 1 x C00141158 set sump evo3
047 C00079016 pipe rubber sump-pump
048 C00142435 high pressure sensor assembly
049 C00144189 cap corner for supp.wash.blade
050 C00144196 support - lower wash arm bush
051 C00066642 1 x C00075111 ring-nut for fastening bottom
052 C00075108 lower wash arm inox 60cm
054 C00074714 terminal protection - heating
055 C00046319 1 x C00066598 heating element 2000w/230v
056 C00054872 support bracket - heating element
057 C00076233 pump junction pipe
059 C00054927 1 x C00144335 ring-nut for air-flow body
060 C00084600 o ring seal 38 mm
061 C00141308 1 x C00141655 air break + turbine evo3
062 C00056001 upper wash arm feed pipe
067 C00098769 upper wash arm seal
099 C00040005 1 x C00033026 grease amblig ta 1 gr.
099 C00073917 clamp for pump cover
099 C00075678 clamp for electrovalve evo3
099 C00075879 clamp
099 C00084479 hose clamp

mod.IDL500EU.2 page 8
2220310B Exploded views

mod.IDL500EU.2 page 9
2220310B Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

001 C00098134 door detergent electrodispenser
002 C00051755 rinse aid cap (pair) raised & flush
003 C00143377 detergent / rinse aid dispenser
004 C00108981 inner door panel
005 C00085358 microswitch
006 C00094128 1 x C00195887 locking assembly evo3
007 C00143211 timer bit100.1 's1' rohs +
009 C00143369 8 functions selector rohs
010 C00140607 on-off switch (unipolar)
011 C00143758 parallel wiring harness assembly
012 C00096881 pilot light red 230v ra2,5 ind.
013 C00143757 dashboard white(pw) idl500eu.2
014 C00143541 start/reset pcb card
015 C00097419 light track lamp 'indesit' evo3
016 C00143006 on-off push button - white
017 C00143007 white(pw) push-button indesit
018 C00143003 knob - white
019 C00143000 bowed outer door shell - white
020 C00065127 1 x C00054815 hinge item, right
021 C00096996 hinge assembly 'lvs evo3'
022 C00058776 washer d = 6 mm
023 C00048504 hinge pin
024 C00065128 1 x C00054817 hinge item, left
025 C00075689 door spring
026 C00066426 tube hinge spring
027 C00075693 gaffel x door spring
028 C00108978 door spacer assy indesit evo3
030 C00140679 seal spring
099 C00076108 screw x canoe klip
099 C00084911 screw 3.5x9.5
099 C00094120 fixing bolt inner door/dashboard
099 C00094141 fixing screw inner/outer door

mod.IDL500EU.2 page 10
 Notices

n1045048: BIT 100 CARD INITIALIZATION

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Free-standing dishwasher

1- Close the door and switch the dishwasher on.

2- Wait for the test cycle to start ( 2 LEDs light up or "ROD" appears on dishwashers with display).
3- Wait 10 seconds ( dishwasher will start to fill water...)
N.B. If the cycle fails to start the card has probably already initialized, so proceed to point 5.
4- To reset the test cycle turn the programme button to reset or hold down the start/reset button for 5 seconds. (Wait for the
buzzer to beep three times or if the dishwasher does not have a buzzer, wait for the programme LEDs to switch off.)
5- To check the aforementioned steps have completed successfully, select a programme and see if it starts; (reset it after this
check).
6- The dishwasher is ready for the customer.

Built-in dishwashers

1- Close the door and switch the dishwasher on.

2- Wait for the test cycle to start
3- Wait 10 seconds ( the dishwasher will start to fill...)
N.B. If the cycle fails to start the card has probably already initialized, so proceed to point 5.
4- To reset the cycle, open the door (2 LEDs lit up) and press the programme button for three bips of the buzzer (or until the
programme LEDs go off for dishwashers with no buzzer).
5- To check the aforementioned steps have completed successfully, press the select programme button and check that the
indicator light beside the corresponding programme comes on.
6- The dishwasher is ready for thecustomer.

mod.IDL500EU.2 page 11
 Electric schemes and links
Cod. 16002095300

mod.IDL500EU.2 page 12
 Legend

Legend: 16002095300

A.. Timer contact LPA Door open

AQS Aquastop electrovalve LPR Prewash LED
B.. Timer contact LRI Rinse LED
C Condensor LS Mains LED -Pilot lampe On/Off
C.. Timer contact LSB Polisher LED
CL Slow cam LSC Cycle ranning lamp
CM Wash pump motor connector LSE Acquastop LED
CN Connector LSS Salt LED
CV Fast cam LV Fan off lamp
D-ED Dispenser - Electric dosing device M Terminal box
D.. Timer contact MB Polisher dip-switch
DB Brightener dispenser ME Acquastop dip-switch
DD Display - Detergent dispenser ML Wash motor
E1 Cold water electrovalve MM Handle dip-switch
E2 Regeneration electrovalve MP Door dip-switch
E3 Hot water electrovalve MR Delay-timer motor - Terminal board
ECO Saving switch MT Timer motor
ED Detergent/Brightener dispenser MTR Fast forward timer motor
EV1 Cold water electrovalve MM- Handle dip-switch MV Motor fan
EV1/2 Half-load electrovalve P Pressure switch
EV2 Regeneration electrovalve P.. Pressure switch contact
EV3 Hot water electrovalve P1 Stage 1 pressure
EVC Hot water electrovalve P2 Stage 2 pressure switch
EVF Cold water electrovalve PAP High pressure switch
EVR Regeneration water electrovalve PO Overflow pressure switch
F Anti-interference filter ML- Wash motor PS Drain pump
FA Radio interferences PULS Push-button panel
I1 On/Off switch - Plus cycle switch -IEC cycle R Heating element
I1/2 Switch half-load R.D. Delay rotary selector
I2 Fast switch -IEC cycle switch (standard) - RA Heating element drying
I2H 2-hour delay switch ROT D Delay rotary selector
I3 Saving switch- Switch for cycle with no pre- ROT. Rotary selector
I4 Switch for cycle fresh dirty S Motor overload cutout

mod.IDL500EU.2 page 13
 I4H 4-hour delay switch SC Selector cycli
I5-ICR Fast cycle switch SS Salt detector
I6 Soak cycle switch ST START
I6H 6-hour delay switch T.. Delay-tymer contact
IAQS Aquastop switch T1 Power supply earth cable -Thermostat 45?C
ID Switch display T2 Lid earth -Thermostat 55?C
IE Saving switch T3 Timer earth -Thermostat 65?C
IEXD Exstra dray switch T36 36?C N.O. Thermostat
IG Main switch T4 Heating element earth
IMV Off motor fan switch T46 46?C N.O. Thermostat
IP High temperature switch T5 Drain pump earth
IS Cut-off switch T57 57?C N.O. Thermostat
ISB Polisher led switch T6 Wash motor earth
ISS Salt LED switch T8 External lid earth
ITR Heating element switch TE Relay switch
L Mains LED THP Thermoprotector
L1 Cycle 1 lamp TM Timer
L1/2 Lamp cjcle half-load TS Safety thermostat
L2 Cycle 2 lamp TS 40 Thermostat 40 ?C
L3 Cycle 3 lamp TS 50 Thermostat 50 ?C
L4 Cycle 4 lamp TS 62 Thermostat 62 ?C
L5 Cycle 5 lamp TS1 Min. temperature thermostat
L6 Cycle 6 lamp TS2 Max. temperature thermostat
LA Drying LED TT Terminal box support earth
LAQ Aquastop on lamp Tcp nner-door earthing connection
LC Cycle ranning lamp Tfa Radio interference
LD Delay activated lamp Tml Pump wash motor earthing connection
LE Saving cycle Tpg Large door earthing connection
LH2 2-hour delay lamp Tpi Inspection door earthing connection
LH4 4-hour delay lamp Tpr Pressure switch
LH6 6-hour delay lamp Tps Discharge pump earthing connection
LL Wash LED Tr Heating element
LP High temperature LED Tte Delay-timer earthing connection

mod.IDL500EU.2 page 14