This device is an emulator immo that replaces a damaged immobilizer or lost car keys for certain Mercedes models including Sprinter, ML, and CR2. It works by making changes to the memory content of the Engine Control Module (ECM) to enable driving the car to a service center. It provides a low-cost alternative to replacing an immo or duplicating car keys. Connecting it to the ECM involves accessing memory 5P08C3 and changing values at specific addresses.
This device is an emulator immo that replaces a damaged immobilizer or lost car keys for certain Mercedes models including Sprinter, ML, and CR2. It works by making changes to the memory content of the Engine Control Module (ECM) to enable driving the car to a service center. It provides a low-cost alternative to replacing an immo or duplicating car keys. Connecting it to the ECM involves accessing memory 5P08C3 and changing values at specific addresses.
This device is an emulator immo that replaces a damaged immobilizer or lost car keys for certain Mercedes models including Sprinter, ML, and CR2. It works by making changes to the memory content of the Engine Control Module (ECM) to enable driving the car to a service center. It provides a low-cost alternative to replacing an immo or duplicating car keys. Connecting it to the ECM involves accessing memory 5P08C3 and changing values at specific addresses.
This device is an emulator immo that replaces a damaged immobilizer or lost car keys for certain Mercedes models including Sprinter, ML, and CR2. It works by making changes to the memory content of the Engine Control Module (ECM) to enable driving the car to a service center. It provides a low-cost alternative to replacing an immo or duplicating car keys. Connecting it to the ECM involves accessing memory 5P08C3 and changing values at specific addresses.
Emulator immo to the car group of Mercedes CR2 replaces damaged immobilizer or the car key for Mercedes Sprinter, ML 5 plugs.
It function after made changes in memory
content of Engine Control Module ECM.
In case of losing the car keys or a car burglary,
it enable to drive off from the road to the car service.
Due to a low cost you can leave it in the car
instead of buying a new immo or making car keys duplicate. There is a possibility of using it as the additional security!! Red LED indicating about transmission: will light up permanently after properly working. Connecting emulator to ECM 5 plugs Sprinter and ML: GND 1.04, 1.05, 1.06 ACC 2.13 CAN H 2.11 CAN L 2.12 In the ECM of Sprinter, ML CR2 engine, 5 plugs, find memory 5P08C3 (read and type as SPI 95040). In memory 5P08C3 in address 1D0 to 1D4 type: 02 02 00 FF FF. Warning!!
Due to possible construction changes of the
cars, before connecting the device check signals by multimeter on the ECM plug.