Introduction To Data Warehouse: Unit I: Data Warehousing

www.Vidyarthiplus.
com
UNIT I: DATA WAREHOUSING

Introduction to Data warehouse
A data warehouse is a collection of data marts representing historical data from
different operations in the company. This data is stored in a structure optimized for querying and
data analysis as a data warehouse. Table design, dimensions and organization should be
consistent throughout a data warehouse so that reports or queries across the data warehouse are
consistent. A data warehouse can also be viewed as a database for historical data from different
functions within a company.
The term Data Warehouse was coined by Bill Inmon in 1990, which he defined in the
following way: "A warehouse is a subject-oriented, integrated, time-variant and non-volatile
collection of data in support of management's decision making process". He defined the terms in
the sentence as follows:
Subject Oriented: Data that gives information about a particular subject instead of about a
company's ongoing operations.
Integrated: Data that is gathered into the data warehouse from a variety of sources and merged
into a coherent whole.
Time-variant: All data in the data warehouse is identified with a particular time period.
Non-volatile: Data is stable in a data warehouse. More data is added but data is never removed.
This enables management to gain a consistent picture of the business. It is a single, complete and
consistent store of data obtained from a variety of different sources made available to end users
in what they can understand and use in a business context. It can be
Used for decision Support
Used to manage and control business
Used by managers and end-users to understand the business and make judgments
Data Warehousing is an architectural construct of information systems that provides users with
current and historical decision support information that is hard to access or present in traditional
operational data stores
Other important terminology
Enterprise Data warehouse: It collects all information about subjects (customers, products,
sales, assets, personnel) that span the entire organization
Data Mart: Departmental subsets that focus on selected subjects. A data mart is a segment of a
data warehouse that can provide data for reporting and analysis on a section, unit, department or
operation in the company, e.g. sales, payroll, production. Data marts are sometimes complete
individual data warehouses which are usually smaller than the corporate data warehouse.
Decision Support System (DSS): Information technology to help the knowledge worker
(executive, manager, and analyst) makes faster & better decisions
Drill-down: Traversing the summarization levels from highly summarized data to the underlying
current or old detail
Metadata: Data about data. Containing location and description of warehouse system
components: names, definition, structure…
Benefits of data warehousing
Data warehouses are designed to perform well with aggregate queries running on large
amounts of data.
The structure of data warehouses is easier for end users to navigate, understand and query
against unlike the relational databases primarily designed to handle lots of transactions.
Data warehouses enable queries that cut across different segments of a company's
operation. E.g. production data could be compared against inventory data even if they
were originally stored in different databases with different structures.
www.Vidyarthiplus.com
Queries that would be complex in very normalized databases could be easier to build and
maintain in data warehouses, decreasing the workload on transaction systems.
Data warehousing is an efficient way to manage and report on data that is from a variety
of sources, non uniform and scattered throughout a company.
Data warehousing is an efficient way to manage demand for lots of information from lots
of users.
Data warehousing provides the capability to analyze large amounts of historical data for
nuggets of wisdom that can provide an organization with competitive advantage.
Operational and informational Data
• Operational Data:
Focusing on transactional function such as bank card withdrawals and deposits
Detailed
Updateable
Reflects current data
• Informational Data:
Focusing on providing answers to problems posed by decision makers
Summarized
Non updateable
DATA WAREHOUSE ARCHITECTURE AND ITS SEVEN COMPONENTS
1. Data sourcing, cleanup, transformation, and migration tools
2. Metadata repository
3. Warehouse/database technology
4. Data marts
5. Data query, reporting, analysis, and mining tools
6. Data warehouse administration and management
7. Information delivery system
1 Data warehouse database
This is the central part of the data warehousing environment. This is the item number 2 in the
above arch. diagram. This is implemented based on RDBMS technology.
2 Sourcing, Acquisition, Clean up, and Transformation Tools
This is item number 1 in the above arch diagram. They perform conversions, summarization, key
changes, structural changes and condensation. The data transformation is required so that the
information can by used by decision support tools. The transformation produces programs,
control statements, JCL code, COBOL code, UNIX scripts, and SQL DDL code etc., to move the
data into data warehouse from multiple operational systems.
The functionalities of these tools are listed below:
To remove unwanted data from operational db
Converting to common data names and attributes
Calculating summaries and derived data
Establishing defaults for missing data
Accommodating source data definition changes
3 Meta data
It is data about data. It is used for maintaining, managing and using the data warehouse. It is
classified into two:
Technical Meta data: It contains information about data warehouse data used by warehouse
designer, administrator to carry out development and management tasks. It includes,
Info about data stores

Transformation descriptions. That is mapping methods from operational db to warehouse
db
Warehouse Object and data structure definitions for target data
The rules used to perform clean up, and data enhancement
Data mapping operations
Access authorization, backup history, archive history, info delivery history, data
acquisition history, data access etc.,
Business Meta data: It contains info that gives info stored in data warehouse to users. It
includes,
Subject areas, and info object type including queries, reports, images, video, audio clips
etc.
Internet home pages
Info related to info delivery system
Data warehouse operational info such as ownerships, audit trails etc.,
4 Access tools
Its purpose is to provide info to business users for decision making. There are five categories:
Data query and reporting tools
Application development tools
Executive info system tools (EIS)
OLAP tools
Data mining tools
5 Data marts
Departmental subsets that focus on selected subjects. They are independent used by
dedicated user group. They are used for rapid delivery of enhanced decision support functionality
to end users. Data mart is used in the following situation:
Extremely urgent user requirement
The absence of a budget for a full scale data warehouse strategy
The decentralization of business needs
The attraction of easy to use tools and mind sized project
Data mart presents two problems:
1. Scalability: A small data mart can grow quickly in multi dimensions. So that while
designing it, the organization has to pay more attention on system scalability, consistency
and manageability issues
2. Data integration
6 Data warehouse admin and management
The management of data warehouse includes,
Security and priority management
Monitoring updates from multiple sources
Data quality checks
Managing and updating meta data
Auditing and reporting data warehouse usage and status
Purging data
Replicating, sub setting and distributing data
Backup and recovery
Data warehouse storage management which includes capacity planning, hierarchical
storage management and purging of aged data etc.,
7 Information delivery system

• It is used to enable the process of subscribing for data warehouse info.
• Delivery to one or more destinations according to specified scheduling algorithm
Building a Data warehouse:

There are two reasons why organizations consider data warehousing a critical need. In
other words, there are two factors that drive you to build and use data warehouse. They are:
Business factors:
Business users want to make decision quickly and correctly using all available data.
Technological factors:
To address the incompatibility of operational data stores
IT infrastructure is changing rapidly. Its capacity is increasing and cost is decreasing so
that building a data warehouse is easy
There are several things to be considered while building a successful data warehouse
Business considerations:
Organizations interested in development of a data warehouse can choose one of the
following two approaches:
Top - Down Approach (Suggested by Bill Inmon)
Bottom - Up Approach (Suggested by Ralph Kimball)
Top - Down Approach
In the top down approach suggested by Bill Inmon, we build a centralized repository to
house corporate wide business data. This repository is called Enterprise Data Warehouse (EDW).
The data in the EDW is stored in a normalized form in order to avoid redundancy.
The central repository for corporate wide data helps us maintain one version of truth of
the data. The data in the EDW is stored at the most detail level. The reason to build the EDW on
the most detail level is to leverage
1. Flexibility to be used by multiple departments.
2. Flexibility to cater for future requirements.
The disadvantages of storing data at the detail level are
1. The complexity of design increases with increasing level of detail.
2. It takes large amount of space to store data at detail level, hence increased cost.
Once the EDW is implemented we start building subject area specific data marts which contain
data in a de normalized form also called star schema. The data in the marts are usually
summarized based on the end users analytical requirements.
The reason to de normalize the data in the mart is to provide faster access to the data for
the end users analytics. If we were to have queried a normalized schema for the same analytics,
we would end up in a complex multiple level joins that would be much slower as compared to
the one on the de normalized schema.
We should implement the top-down approach when
1. The business has complete clarity on all or multiple subject areas data warehosue
requirements.
2. The business is ready to invest considerable time and money.
The advantage of using the Top Down approach is that we build a centralized repository to cater
for one version of truth for business data. This is very important for the data to be reliable,
consistent across subject areas and for reconciliation in case of data related contention between
subject areas.
The disadvantage of using the Top Down approach is that it requires more time and initial
investment. The business has to wait for the EDW to be implemented followed by building the
data marts before which they can access their reports.
Bottom Up Approach
The bottom up approach suggested by Ralph Kimball is an incremental approach to build
a data warehouse. Here we build the data marts separately at different points of time as and when
the specific subject area requirements are clear. The data marts are integrated or combined
together to form a data warehouse. Separate data marts are combined through the use of
conformed dimensions and conformed facts. A conformed dimension and a conformed fact is
one that can be shared across data marts.
A Conformed dimension has consistent dimension keys, consistent attribute names and
consistent values across separate data marts. The conformed dimension means exact same thing
with every fact table it is joined.
A Conformed fact has the same definition of measures, same dimensions joined to it and
at the same granularity across data marts.
The bottom up approach helps us incrementally build the warehouse by developing and
integrating data marts as and when the requirements are clear. We don’t have to wait for
knowing the overall requirements of the warehouse. We should implement the bottom up
approach when
1. We have initial cost and time constraints.
2. The complete warehouse requirements are not clear. We have clarity to only one data
mart.
The advantage of using the Bottom Up approach is that they do not require high initial costs
and have a faster implementation time; hence the business can start using the marts much earlier
as compared to the top-down approach.
The disadvantages of using the Bottom Up approach is that it stores data in the de normalized
format, hence there would be high space usage for detailed data. We have a tendency of not
keeping detailed data in this approach hence losing out on advantage of having detail data .i.e.
flexibility to easily cater to future requirements.
Bottom up approach is more realistic but the complexity of the integration may become a
serious obstacle.
Design considerations
To be a successful data warehouse designer must adopt a holistic approach that is
considering all data warehouse components as parts of a single complex system, and take into
account all possible data sources and all known usage requirements.
Most successful data warehouses that meet these requirements have these common
characteristics:
Are based on a dimensional model
Contain historical and current data
Include both detailed and summarized data
Consolidate disparate data from multiple sources while retaining consistency
Data warehouse is difficult to build due to the following reason:
Heterogeneity of data sources
Use of historical data
Growing nature of data base
Data warehouse design approach muse be business driven, continuous and iterative engineering
approach. In addition to the general considerations there are following specific points relevant to
the data warehouse design:
Data content
The content and structure of the data warehouse are reflected in its data model. The data
model is the template that describes how information will be organized within the integrated
warehouse framework. The data warehouse data must be a detailed data. It must be formatted,
cleaned up and transformed to fit the warehouse data model.
Meta data
It defines the location and contents of data in the warehouse. Meta data is searchable by
users to find definitions or subject areas. In other words, it must provide decision support
oriented pointers to warehouse data and thus provides a logical link between warehouse data and
decision support applications.
Data distribution
One of the biggest challenges when designing a data warehouse is the data placement and
distribution strategy. Data volumes continue to grow in nature. Therefore, it becomes necessary
to know how the data should be divided across multiple servers and which users should get
access to which types of data. The data can be distributed based on the subject area, location
(geographical region), or time (current, month, year).
Tools
A number of tools are available that are specifically designed to help in the
implementation of the data warehouse. All selected tools must be compatible with the given data
warehouse environment and with each other. All tools must be able to use a common Meta data
repository.
Design steps
The following nine-step method is followed in the design of a data warehouse:
1. Choosing the subject matter
2. Deciding what a fact table represents
3. Identifying and conforming the dimensions
4. Choosing the facts
5. Storing pre calculations in the fact table
6. Rounding out the dimension table
7. Choosing the duration of the db
8. The need to track slowly changing dimensions
9. Deciding the query priorities and query models
Mapping the Data Warehouse to a Multiprocessor Architecture

Shared Memory Architecture
Tightly coupled shared memory systems, illustrated in following figure have the following
characteristics:
Multiple PUs share memory.
Each PU has full access to all shared memory through a common bus.
Communication between nodes occurs via shared memory.
Performance is limited by the bandwidth of the memory bus.
Symmetric multiprocessor (SMP) machines are often nodes in a cluster. Multiple SMP
nodes can be used with Oracle Parallel Server in a tightly coupled system, where memory is
shared among the multiple PUs, and is accessible by all the PUs through a memory bus.
Examples of tightly coupled systems include the Pyramid, Sequent, and Sun SparcServer.
Performance is potentially limited in a tightly coupled system by a number of factors. These
include various system components such as the memory bandwidth, PU to PU communication
bandwidth, the memory available on the system, the I/O bandwidth, and the bandwidth of the
common bus.
Parallel processing advantages of shared memory systems are these:
Memory access is cheaper than inter-node communication. This means that internal
synchronization is faster than using the Lock Manager.
Shared memory systems are easier to administer than a cluster.
A disadvantage of shared memory systems for parallel processing is as follows:
Scalability is limited by bus bandwidth and latency, and by available memory.
Shared Disk Architecture
Shared disk systems are typically loosely coupled. Such systems, illustrated in following
figure, have the following characteristics:
Each node consists of one or more PUs and associated memory.
Memory is not shared between nodes.
Communication occurs over a common high-speed bus.
Each node has access to the same disks and other resources.
A node can be an SMP if the hardware supports it.
Bandwidth of the high-speed bus limits the number of nodes (scalability) of the system.
The cluster illustrated in figure is composed of multiple tightly coupled nodes. The
Distributed Lock Manager (DLM ) is required. Examples of loosely coupled systems are
VAXclusters or Sun clusters.
Since the memory is not shared among the nodes, each node has its own data cache.
Cache consistency must be maintained across the nodes and a lock manager is needed to
maintain the consistency. Additionally, instance locks using the DLM on the Oracle level must
be maintained to ensure that all nodes in the cluster see identical data.
There is additional overhead in maintaining the locks and ensuring that the data caches
are consistent. The performance impact is dependent on the hardware and software components,
such as the bandwidth of the high-speed bus through which the nodes communicate, and DLM
performance.
Parallel processing advantages of shared disk systems are as follows:
Shared disk systems permit high availability. All data is accessible even if one node dies.
These systems have the concept of one database, which is an advantage over shared
nothing systems.
Shared disk systems provide for incremental growth.
Parallel processing disadvantages of shared disk systems are these:
Inter-node synchronization is required, involving DLM overhead and greater dependency
on high-speed interconnect.
If the workload is not partitioned well, there may be high synchronization overhead.
There is operating system overhead of running shared disk software.
Shared Nothing Architecture
Shared nothing systems are typically loosely coupled. In shared nothing systems only one
CPU is connected to a given disk. If a table or database is located on that disk, access depends
entirely on the PU which owns it. Shared nothing systems can be represented as follows:
Shared nothing systems are concerned with access to disks, not access to memory.
Nonetheless, adding more PUs and disks can improve scaleup. Oracle Parallel Server can access
the disks on a shared nothing system as long as the operating system provides transparent disk
access, but this access is expensive in terms of latency.
Shared nothing systems have advantages and disadvantages for parallel processing:
Advantages
Shared nothing systems provide for incremental growth.
System growth is practically unlimited.
MPPs are good for read-only databases and decision support applications.
Failure is local: if one node fails, the others stay up.
Disadvantages
More coordination is required.
More overhead is required for a process working on a disk belonging to another node.
If there is a heavy workload of updates or inserts, as in an online transaction processing
system, it may be worthwhile to consider data-dependent routing to alleviate contention.
Parallel DBMS features

Scope and techniques of parallel DBMS operations
Optimizer implementation
Application transparency
Parallel environment which allows the DBMS server to take full advantage of the
existing facilities on a very low level
DBMS management tools help to configure, tune, admin and monitor a parallel RDBMS
as effectively as if it were a serial RDBMS
Price / Performance: The parallel RDBMS can demonstrate a non linear speed up and
scale up at reasonable costs.
DBMS schemas for decision support

: The basic concepts of dimensional modeling are: facts, dimensions and measures. A fact
is a collection of related data items, consisting of measures and context data. It typically
represents business items or business transactions. A dimension is a collection of data that
describe one business dimension. Dimensions determine the contextual background for the facts;
they are the parameters over which we want to perform OLAP. A measure is a numeric attribute
of a fact, representing the performance or behavior of the business relative to the dimensions.
Considering Relational context, there are three basic schemas that are used in dimensional
modeling:
1. Star schema
2. Snowflake schema
3. Fact constellation schema
Star schema
The multidimensional view of data that is expressed using relational data base semantics is
provided by the data base schema design called star schema. The basic of stat schema is that
information can be classified into two groups:
Facts
Dimension
Star schema has one large central table (fact table) and a set of smaller tables (dimensions)
arranged in a radial pattern around the central table.
Facts are core data element being analyzed while dimensions are attributes about the facts.
The determination of which schema model should be used for a data warehouse should be based
upon the analysis of project requirements, accessible tools and project team preferences.
What is star schema? The star schema architecture is the simplest data warehouse schema. It is
called a star schema because the diagram resembles a star, with points radiating from a center.
The center of the star consists of fact table and the points of the star are the dimension tables.
Usually the fact tables in a star schema are in third normal form(3NF) whereas dimensional
tables are de-normalized. Despite the fact that the star schema is the simplest architecture, it is
most commonly used nowadays and is recommended by Oracle.
Fact Tables:
A fact table is a table that contains summarized numerical and historical data (facts) and a
multipart index composed of foreign keys from the primary keys of related dimension tables.
A fact table typically has two types of columns: foreign keys to dimension tables and measures
those that contain numeric facts. A fact table can contain fact's data on detail or aggregated level.
Dimension Tables:
Dimensions are categories by which summarized data can be viewed. E.g. a profit summary in a
fact table can be viewed by a Time dimension (profit by month, quarter, year), Region dimension
(profit by country, state, city), Product dimension (profit for product1, product2).
A dimension is a structure usually composed of one or more hierarchies that categorizes data. If
a dimension hasn't got a hierarchies and levels it is called flat dimension or list. The primary
keys of each of the dimension tables are part of the composite primary key of the fact table.
Dimensional attributes help to describe the dimensional value. They are normally descriptive,
textual values. Dimension tables are generally small in size then fact table.
Typical fact tables store data about sales while dimension tables data about geographic region
(markets, cities), clients, products, times, channels.
Measures:
a. Measures are numeric data based on columns in a fact table. They are the primary data
which end users are interested in. E.g. a sales fact table may contain a profit measure which
represents profit on each sale.
b. Aggregations are pre calculated numeric data. By calculating and storing the answers to a
query before users ask for it, the query processing time can be reduced. This is key in
providing fast query performance in OLAP.
c. Cubes are data processing units composed of fact tables and dimensions from the data
warehouse. They provide multidimensional views of data, querying and analytical
capabilities to clients.
The main characteristics of star schema:
Simple structure -> easy to understand schema
Great query effectives -> small number of tables to join
Relatively long time of loading data into dimension tables -> de-normalization,
redundancy data caused that size of the table could be large.
The most commonly used in the data warehouse implementations -> widely
supported by a large number of business intelligence tools
Snowflake schema: is the result of decomposing one or more of the dimensions. The many-to-
one relationships among sets of attributes of a dimension can separate new dimension tables,
forming a hierarchy. The decomposed snowflake structure visualizes the hierarchical structure of
dimensions very well.
Fact constellation schema: For each star schema it is possible to construct fact constellation
schema (for example by splitting the original star schema into more star schemes each of them
describes facts on another level of dimension hierarchies). The fact constellation architecture
contains multiple fact tables that share many dimension tables.
The main shortcoming of the fact constellation schema is a more complicated design because
many variants for particular kinds of aggregation must be considered and selected. Moreover,
dimension tables are still large.
Multi relational Database:
The relational implementation of multidimensional data base systems are referred to as multi
relational database systems
Data Cleaning
 Remove noise
 Correct inconsistencies.
 By filling missing values, smoothing noisy data
 Identify outliers
 Resolve inconsistencies
Metadata:
• Location & Description of data warehouse system and data components.
• Names, definitions, structure & content of data warehouse.
• Identification of authorized sources.
• Subscription information
• Data warehouse operational information
• Security authorization & access control list
• Integration & transformation rules.
• Mapping methods
– Meta data used for maintaining, building, managing and using data warehouse.
– Helps the user to understand the data
Meta Data Interchange Initiative:

• To develop the standard specification for meta data inter change format and support its
mechanism called meta data interchange initiative.
Goal of a Charter:
• Creating a vendor independent, industry defined and maintained standard access
mechanism.
• Enabling the users to control and manage the access manipulate the meta data by using
interchange complaint tools.
• Allow the users to build the tools to meet their needs
• Enabling the tools to satisfy their meta data access requirements freely.
• Define clear and simple infrastructure.
• Minimize the amount of modification.
• Creating a procedure for establishing, maintaining, extending, updating.
Core set components:
• Represent the minimum common denominator of the meta data element.
• Represent minimum point of integration.
• Approve optional and extension components.
Defines 2 distinct meta models.
• Application meta model.
– Load the meta data for particular application.
• Meta data meta model.
– Set of objects to describe meta data.
Meta Data Interchange Standard Framework:
• Approaches:
– Procedural approach.
– ASCII batch approach
– Hybrid approach.
Meta Data Interchange Standard Framework:
• Standard Meta Data Model:

– Refers to the ASCII file format Used to represent the meta data.
• Standard Access Frame Work:
– Describe the minimum number of API function.
• Tool Profile:
– Provides by tool vendor.
– Mention the aspect of interchange standard meta model.
• User Configuration:
– Mention the interchange path.
– Allow the customers to control the flow of meta data from tool to tool
Meta Data Repository
• Meta data is housed in and manages by meta data repository.
• Meta data repository management software can be used to map the source data request to
the target database, generate code, integrate, transform the data control.
• Meta data defines the location of data in the ware house, business view relationships
between operational data ware house.
• Meta data provides logic link between ware house and application.
• Provides decision support.
• All access paths to the warehouse should have meta data as an entry point.
• Data warehouse should have a mechanism to populate and maintain the repository.
Various paths available to the warehouse:
• The data warehouse should not provide direct access.
• Via meta data.
Benefits of data warehouse framework:
• Provides a suite of tools for meta data management,
• Reduces redundancy.
• Reduces inconsistency.
• Simplifies management.
• Improves organization control.
• Increases identification.
• Understanding co-ordination.
• Increase flexibility
• Provides effective data management.
• Enforces CASE development.
Meta Data Integration Points
Meta data management:

 The data warehousing is the inability to communicate to the end users.
 The users and application should be provided with a road map to the information stored
the warehouse. The road map is meta data.
 Meta data defines all the elements, attributes, data sources, timing and the rules that
govern data use and the data transformation.
 Copy of meta data will be available to all tools.
 Meta data should guide the users in data warehouse
Implementation Examples:
• Platinum technologies
• R&O
• Prism
• Logic Works
1. Platinum Repository:
a. Client/server repository
b. Open system solution
c. Allows the company to manage, maintain and access corporate data application.
d. Users and data warehouse administrators can manage data by the integration.
e. Platinum has a global data dictionary a data junction to all corporate information
f. Gives a consistent view
g. Supported in OS/2 windows 95, NT, UNIX, Sun Solaris.
2. R & O Repository
a. Client/server repository
b. Supports many platforms.
c. Performance: sub second response time.
d. Scalability  Laptop to mainframe
e. Capacity: support very large repository.
f. Drawback:
g. Meta data storage.
3. Prism
a. Prism’s directory manager is meta data.
i. Import business models
ii. Import meta data from ware house manager.
iii. Export meta data into catalogs.
iv. Create flexible customized views.
b. Directory manager has three components:
i. Information builder  all entries
ii. Directory builder  meta data relationships
iii. Directory navigator  provides extensive view & gives better understanding.
Prism directory manager answers question like:
• What data exists
• Where to find data
• What are the original sources of data.
Advantages of single integration point
• Simplifies the population of data
• Accuracy
• Navigation and access is so easiest task.
4. Logic Works Universal Directory

• Meta data repository tool
• Acts as a hub
• Centralizing meta data
– Improves the way of managing.
• Activities:
– Inventorying source data
– Designing the data warehouse
– Mapping source to target data
– Populating the ware house
– Analyzing the data in the data warehouse
– Evolving the data warehouse content.
Universal directory components:
• Universal explorer
– Provides the users with a set of tools (browsing)
– Act as a search engine
– Allow the user to visualize the data warehouse using STAR schema.
• Directory administrator Maintain security
UNIT II
BUSINESS ANALYSIS
Reporting Query tools and Applications
The data warehouse is accessed using an end-user query and reporting tool from Business
Objects. Business Objects provides several tools to securely access the data warehouse or
personal data files with a point-and-click interface including the following:
BusinessObjects (Reporter and Explorer) ? a Microsoft Windows based query and reporting tool.
InfoView - a web based tool, that allows reports to be refreshed on demand (but can not create
new reports).
InfoBurst - a web based server tool, that allows reports to be refreshed, scheduled and
distributed. It can be used to distribute reports and data to users or servers in various formats (e.g.
Text, Excel, PDF, HTML, etc.). For more information, see the documentation below:
o InfoBurst Usage Notes (PDF)
o InfoBurst User Guide (PDF)
Data Warehouse List Upload - a web based tool, that allows lists of data to be uploaded into
the data warehouse for use as input to queries. For more information, see the documentation
below:
o Data Warehouse List Upload Instructions (PDF)
WSU has negotiated a contract with Business Objects for purchasing these tools at a
discount. View BusObj Rates.
Selecting your Query Tool:
a. The query tools discussed in the next several slides represent the most commonly used
query tools at Penn State.
b. A Data Warehouse user is free to select any query tool, and is not limited to the ones
mentioned.
c. What is a ―Query Tool‖?
d. A query tool is a software package that allows you to connect to the data warehouse from
your PC and develop queries and reports.
There are many query tools to choose from. Below is a listing of what is currently being
used on the PC:
1. Microsoft Access
2. Microsoft Excel
3. Cognos Impromptu
Data Warehousing Tools and Technologies
a. Building a data warehouse is a complex task because there is no vendor that provides
an ‗end-to-end‘ set of tools.
b. Necessitates that a data warehouse is built using multiple products from different
vendors.
c. Ensuring that these products work well together and are fully integrated is a major
challenge.
Cognos impromptu
Query Tabs:
Data
 Identify what to query
 Click and drag
Sort
 Hierarchy presentation
 Ascending or descending order
Group
 Summarized data by group order
Filter
 Defines criteria
 Specifies query range
Administrative
 Access
 Profile
 Client/Server
Generating reports:
Edit features on the toolbar allowed changes to report data after the query has been
completed
 Modify existing data
 Format numerical and date fields
 Perform calculations
 Group data
 Sort columns.
Catalog Query:
General Ledger System Data:

 Data Elements
 Table Format
 Balances – Summary information
 Lines – Journal entry detail
 Numeric
 Detail and summary
 Include calculations
 Descriptive
 Accounting string segment values
Cognous Impromptu
What is impromptu?
Impromptu is an interactive database reporting tool. It allows Power Users to query data without
programming knowledge. When using the Impromptu tool, no data is written or changed in the
database. It is only capable of reading the data.
Impromptu's main features includes,
Interactive reporting capability

Enterprise-wide scalability
Superior user interface
Fastest time to result
Lowest cost of ownership
Catalogs
Impromptu stores metadata in subject related folders. This metadata is what will be used to
develop a query for a report. The metadata set is stored in a file called a ‗catalog‘. The catalog
does not contain any data. It just contains information about connecting to the database and the
fields that will be accessible for reports.
A catalog contains:
• Folders—meaningful groups of information representing columns from one or more
tables
• Columns—individual data elements that can appear in one or more folders
• Calculations—expressions used to compute required values from existing data
• Conditions—used to filter information so that only a certain type of information is
displayed
• Prompts—pre-defined selection criteria prompts that users can include in reports they
create
• Other components, such as metadata, a logical database name, join information, and
user classes
You can use catalogs to
• view, run, and print reports
• export reports to other applications
• disconnect from and connect to the database
• create reports
• change the contents of the catalog
• add user classes
Online Analytical Processing (OLAP), OLAP Need, Multidimensional Data Model:
The Multidimensional data Model
The multidimensional data model is an integral part of On-Line Analytical Processing, or OLAP.
Because OLAP is on-line, it must provide answers quickly; analysts pose iterative queries during
interactive sessions, not in batch jobs that run overnight. And because OLAP is also analytic, the
queries are complex. The multidimensional data model is designed to solve complex queries in
real time.
Multidimensional data model is to view it as a cube. The cable at the left contains detailed sales
data by product, market and time. The cube on the right associates sales number (unit sold) with
dimensions-product type, market and time with the unit variables organized as cell in an array.
This cube can be expended to include another array-price-which can be associates with all or
only some dimensions. As number of dimensions increases number of cubes cell increase
exponentially.
Dimensions are hierarchical in nature i.e. time dimension may contain hierarchies for years,
quarters, months, weak and day. GEOGRAPHY may contain country, state, city etc.
In this cube we can observe, that each side of the cube represents one of the elements of the
question. The x-axis represents the time, the y-axis represents the products and the z-axis
represents different centers. The cells of in the cube represents the number of product sold or can
represent the price of the items.
This Figure also gives a different understanding to the drilling down operations. The relations
defined must not be directly related, they related directly.
The size of the dimension increase, the size of the cube will also increase exponentially. The
time response of the cube depends on the size of the cube.
Operations in Multidimensional Data Model:
• Aggregation (roll-up)
– dimension reduction: e.g., total sales by city
– summarization over aggregate hierarchy: e.g., total sales by city and year -> total
sales by region and by year
• Selection (slice) defines a subcube
– e.g., sales where city = Palo Alto and date = 1/15/96
• Navigation to detailed data (drill-down)
– e.g., (sales - expense) by city, top 3% of cities by average income
• Visualization Operations (e.g., Pivot or dice)
OLAP
OLAP stands for Online Analytical Processing. It uses database tables (fact and dimension
tables) to enable multidimensional viewing, analysis and querying of large amounts of data. E.g.
OLAP technology could provide management with fast answers to complex queries on their
operational data or enable them to analyze their company's historical data for trends and patterns.
Online Analytical Processing (OLAP) applications and tools are those that are designed to ask
―complex queries of large multidimensional collections of data.‖ Due to that OLAP is
accompanied with data warehousing.
Need
The key driver of OLAP is the multidimensional nature of the business problem. These problems
are characterized by retrieving a very large number of records that can reach gigabytes and
terabytes and summarizing this data into a form information that can by used by business
analysts.
One of the limitations that SQL has, it cannot represent these complex problems. A query will be
translated in to several SQL statements. These SQL statements will involve multiple joins,
intermediate tables, sorting, aggregations and a huge temporary memory to store these tables.
These procedures required a lot of computation which will require a long time in computing. The
second limitation of SQL is its inability to use mathematical models in these SQL statements. If
an analyst, could create these complex statements using SQL statements, still there will be a
large number of computation and huge memory needed. Therefore the use of OLAP is preferable
to solve this kind of problem.
CATEGORIES OF OLAP TOOLS

MOLAP
This is the more traditional way of OLAP analysis. In MOLAP, data is stored in a
multidimensional cube. The storage is not in the relational database, but in proprietary formats.
That is, data stored in array-based structures.
Advantages:
Excellent performance: MOLAP cubes are built for fast data retrieval, and are optimal for
slicing and dicing operations.
Can perform complex calculations: All calculations have been pre-generated when the
cube is created. Hence, complex calculations are not only doable, but they return quickly.
Disadvantages:
Limited in the amount of data it can handle: Because all calculations are performed when
the cube is built, it is not possible to include a large amount of data in the cube itself. This
is not to say that the data in the cube cannot be derived from a large amount of data.
Indeed, this is possible. But in this case, only summary-level information will be included
in the cube itself.
Requires additional investment: Cube technology are often proprietary and do not already
exist in the organization. Therefore, to adopt MOLAP technology, chances are additional
investments in human and capital resources are needed.
Examples: Hyperion Essbase, Fusion (Information Builders)

ROLAP
This methodology relies on manipulating the data stored in the relational database to give the
appearance of traditional OLAP's slicing and dicing functionality. In essence, each action of
slicing and dicing is equivalent to adding a "WHERE" clause in the SQL statement. Data stored
in relational tables
Advantages:
Can handle large amounts of data: The data size limitation of ROLAP technology is the
limitation on data size of the underlying relational database. In other words, ROLAP
itself places no limitation on data amount.
Can leverage functionalities inherent in the relational database: Often, relational database
already comes with a host of functionalities. ROLAP technologies, since they sit on top
of the relational database, can therefore leverage these functionalities.
Disadvantages:
Performance can be slow: Because each ROLAP report is essentially a SQL query (or
multiple SQL queries) in the relational database, the query time can be long if the
underlying data size is large.
Limited by SQL functionalities: Because ROLAP technology mainly relies on generating
SQL statements to query the relational database, and SQL statements do not fit all needs
(for example, it is difficult to perform complex calculations using SQL), ROLAP
technologies are therefore traditionally limited by what SQL can do. ROLAP vendors
have mitigated this risk by building into the tool out-of-the-box complex functions as
well as the ability to allow users to define their own functions.
Examples: Microstrategy Intelligence Server, MetaCube (Informix/IBM)
HOLAP (MQE: Managed Query Environment)
HOLAP technologies attempt to combine the advantages of MOLAP and ROLAP. For
summary-type information, HOLAP leverages cube technology for faster performance. It stores
only the indexes and aggregations in the multidimensional form while the rest of the data is
stored in the relational database.
Examples: PowerPlay (Cognos), Brio, Microsoft Analysis Services, Oracle Advanced Analytic
Services.
OLAP Guidelines:
Dr. E.F. Codd the ―father‖ of the relational model, created a list of rules to deal with the OLAP
systems. Users should priorities these rules according to their needs to match their business
requirements (reference 3). These rules are:
1) Multidimensional conceptual view: The OLAP should provide an appropriate
multidimensional Business model that suits the Business problems and Requirements.
2) Transparency: The OLAP tool should provide transparency to the input data for the users.
3) Accessibility: The OLAP tool should only access the data required only to the analysis
needed.
4) Consistent reporting performance: The Size of the database should not affect in any way
the performance.
5) Client/server architecture: The OLAP tool should use the client server architecture to
ensure better performance and flexibility.
6) Generic dimensionality: Data entered should be equivalent to the structure and operation
requirements.
7) Dynamic sparse matrix handling: The OLAP too should be able to manage the sparse
matrix and so maintain the level of performance.
8) Multi-user support: The OLAP should allow several users working concurrently to work
together.
9) Unrestricted cross-dimensional operations: The OLAP tool should be able to perform
operations across the dimensions of the cube.
10) Intuitive data manipulation. ―Consolidation path re-orientation, drilling down across
columns or rows, zooming out, and other manipulation inherent in the consolidation path
outlines should be accomplished via direct action upon the cells of the analytical model,
and should neither require the use of a menu nor multiple trips across the user
interface.‖(Reference 4)
11) Flexible reporting: It is the ability of the tool to present the rows and column in a manner
suitable to be analyzed.
12) Unlimited dimensions and aggregation levels: This depends on the kind of Business,
where multiple dimensions and defining hierarchies can be made.
In addition to these guidelines an OLAP system should also support:

Comprehensive database management tools: This gives the database management to
control distributed Businesses
The ability to drill down to detail source record level: Which requires that The OLAP
tool should allow smooth transitions in the multidimensional database.
Incremental database refresh: The OLAP tool should provide partial refresh.
Structured Query Language (SQL interface): the OLAP system should be able to
integrate effectively in the surrounding enterprise environment.
OLTP vs OLAP
OLTP stands for On Line Transaction Processing and is a data modeling approach
typically used to facilitate and manage usual business applications. Most of applications you see
and use are OLTP based. OLTP technology used to perform updates on operational or
transactional systems (e.g., point of sale systems)
OLAP stands for On Line Analytic Processing and is an approach to answer multi-
dimensional queries. OLAP was conceived for Management Information Systems and Decision
Support Systems. OLAP technology used to perform complex analysis of the data in a data
warehouse.
The following table summarizes the major differences between OLTP and OLAP system
design.
OLTP System OLAP System

Online Transaction Processing Online Analytical Processing
(Operational System) (Data Warehouse)
Operational data; OLTPs are the Consolidation data; OLAP data comes
Source of data
original source of the data. from the various OLTP Databases
Purpose of To control and run fundamental To help with planning, problem solving,
data business tasks and decision support
Reveals a snapshot of ongoing Multi-dimensional views of various
What the data
business processes kinds of business activities
Inserts and Short and fast inserts and updates Periodic long-running batch jobs refresh
Updates initiated by end users the data
Relatively standardized and simple
Often complex queries involving
Queries queries Returning relatively few
aggregations
records
Depends on the amount of data involved;
Processing batch data refreshes and complex queries
Typically very fast
Speed may take many hours; query speed can
be improved by creating indexes
Larger due to the existence of
Space Can be relatively small if historical
aggregation structures and history data;
Requirements data is archived
requires more indexes than OLTP
Typically de-normalized with fewer

Database
Highly normalized with many tables tables; use of star and/or snowflake
Design
schemas
Backup religiously; operational data Instead of regular backups, some
Backup and is critical to run the business, data environments may consider simply
Recovery loss is likely to entail significant reloading the OLTP data as a recovery
monetary loss and legal liability method
Multidimensional versus Multi relational OLAP, Categories of Tools
Notes:
Representation of Multi-Dimensional Data:
 OLAP database servers use multi-dimensional structures to store data and relationships between data.
 Multi-dimensional structures are best-visualized as cubes of data, and cubes within cubes of data. Each
side of a cube is a dimension.
Mrs. R.Sudha M.Tech.,(Ph.D)
Assistant Professor,
Department of Computer Science and Engineering,
 Multi-dimensional databases are a compact and easy-to-understand way of visualizing and
manipulating data elements that have many inter-relationships. Dr. Pauls Engineering College,
NH-66, Pulichapallam Village, Vanur Taluk,
 The cube can be expanded to include another dimension, for example, the number of sales staff in
Villupuram District – 605109
each city.
E-mail Address: jsudha16@yahoo.com
 The response time of a multi-dimensional query depends on how many cells have to be added on-
the-fly.
 As the number of dimensions increases, the number of cube‘s cells increases exponentially.
Multi-dimensional OLAP supports common analytical operations, such as:
o Consolidation: involves the aggregation of data such as ‗roll-ups‘ or complex expressions
involving interrelated data. Foe example, branch offices can be rolled up to cities and
rolled up to countries.
o Drill-Down: is the reverse of consolidation and involves displaying the detailed data that
comprises the consolidated data.
o Slicing and dicing: refers to the ability to look at the data from different viewpoints.
Slicing and dicing is often performed along a time axis in order to analyze trends and find
patterns.
Relational OLAP (ROLAP)
 ROLAP is the fastest-growing type of OLAP tools.

 ROLAP supports RDBMS products through the use of a metadata layer, thus avoiding the
requirement to create a static multi-dimensional data structure.
 This facilitates the creation of multiple multi-dimensional views of the two-dimensional relation.
 To improve performance, some ROLAP products have enhanced SQL engines to support the
complexity of multi-dimensional analysis, while others recommend, or require, the use of highly
denormalized database designs such as the star schema.
 The development issues associated with ROLAP technology:
 Performance problems associated with the processing of complex queries that require
multiple passes through the relational data.
 Development of middleware to facilitate the development of multi-dimensional
applications.
 Development of an option to create persistent multi-dimensional structures, together with
facilities o assist in the administration of these structures.
OLAP Tools and the Internet
Categorization of OLAP Tools

OLAP tools are designed to manipulate and control multi-dimensional databases and help the
sophisticated user to analyze the data using clear multidimensional complex views. Their typical
applications include product performance and profitability, effectiveness of a sales program or a
marketing campaign, sales forecasting, and capacity planning.
Describes The Relation of the MOLAP with the server and end user.
ROLAP
OLAP Tools and the internet:

The mainly comprehensive premises in computing have been the internet and data warehousing thus
the integration of these two giant technologies is a necessity. The advantages of using the Web for access
are inevitable.(Reference 3) These advantages are:
The internet provides connectivity between countries acting as a free resource.
The web eases administrative tasks of managing scattered locations.
The Web allows users to store and manage data and applications on servers that can be managed,
maintained and updated centrally.
These reasons indicate the importance of the Web in data storage and manipulation. The Web-enabled
data access has many significant features, such as:
The first
The second
The emerging third
HTML publishing
Helper applications
Plug-ins
Server-centric components
Java and active-x applications
Products for OLAP

Microsoft Analysis Services (previously called OLAP Services, part of SQL Server), IBM's DB2
OLAP Server, SAP BW and products from Brio, Business Objects, Cognos, Micro Strategy and others.
Companies using OLAP
MIS AG Overview
MIS AG is the leading European provider of business intelligence solutions and services,
providing development, implementation, and service of systems for budgeting, reporting,
consolidation, and analysis. MIS AG products include industry and platform independent
software for efficient corporate controlling.
Poet Overview
With FastObjects™, German Poet Software GmbH (Poet) provides developers with a flexible
Object-oriented Database Management System (ODBMS) solution optimized for managing
complexity in high-performance applications using Java technology, C++ and .NET.
UNIT III
DATA MINING
.
What motivated data mining? Why is it important?
The major reason that data mining has attracted a great deal of attention in information industry in recent
years is due to the wide availability of huge amounts of data and the imminent need for turning such data
into useful information and knowledge. The information and knowledge gained can be used for
applications ranging from business management, production control, and market analysis, to engineering
design and science exploration.
The evolution of database technology
What is data mining?
Data mining refers to extracting or mining" knowledge from large amounts of data. There are many other
terms related to data mining, such as knowledge mining, knowledge extraction, data/pattern analysis, data
archaeology, and data dredging. Many people treat data mining as a synonym for another popularly used
term, Knowledge Discovery in Databases", or KDD
Essential step in the process of knowledge discovery in databases
Knowledge discovery as a process is depicted in following figure and consists of an iterative sequence of
the following steps:
 data cleaning: to remove noise or irrelevant data

 data integration: where multiple data sources may be combined
 data selection: where data relevant to the analysis task are retrieved from the database
 data transformation: where data are transformed or consolidated into forms appropriate for
mining by performing summary or aggregation operations
 data mining :an essential process where intelligent methods are applied in order to extract data
patterns
 Pattern evaluation to identify the truly interesting patterns representing knowledge based on
some interestingness measures knowledge presentation: where visualization and knowledge
representation techniques are used to present the mined knowledge to the user.
Architecture of a typical data mining system/Major Components
Data mining is the process of discovering interesting knowledge from large amounts of data stored either
in databases, data warehouses, or other information repositories. Based on this view, the architecture of a
typical data mining system may have the following major components:
1. A database, data warehouse, or other information repository, which consists of the set of
databases, data warehouses, spreadsheets, or other kinds of information repositories
containing the student and course information.
2. A database or data warehouse server which fetches the relevant data based on users‟ data
mining requests.
3. A knowledge base that contains the domain knowledge used to guide the search or to evaluate
the interestingness of resulting patterns. For example, the knowledge base may contain
metadata which describes data from multiple heterogeneous sources.
4. A data mining engine, which consists of a set of functional modules for tasks such as
classification, association, classification, cluster analysis, and evolution and deviation
analysis.
5. A pattern evaluation module that works in tandem with the data mining modules by
employing interestingness measures to help focus the search towards interestingness patterns.
6. A graphical user interface that allows the user an interactive approach to the data mining
system.
How is a data warehouse different from a database? How are they similar?
• Differences between a data warehouse and a database: A data warehouse is a repository of information
collected from multiple sources, over a history of time, stored under a unified schema, and used for data
analysis and decision support; whereas a database, is a collection of interrelated data that represents the
current status of the stored data. There could be multiple heterogeneous databases where the schema of
one database may not agree with the schema of another. A database system supports ad-hoc query and on-
line transaction processing. For more details, please refer to the section “Differences between
operational database systems and data warehouses.”
• Similarities between a data warehouse and a database: Both are repositories of information, storing huge
amounts of persistent data.
Data mining: on what kind of data?
Describe the following advanced database systems and applications: object-relational databases,
spatial databases, text databases, multimedia databases, the World Wide Web.
In principle, data mining should be applicable to any kind of information repository. This includes
relational databases, data warehouses, transactional databases, advanced database systems,
flat files, and the World-Wide Web. Advanced database systems include object-oriented and object-
relational databases, and special c application-oriented databases, such as spatial databases, time-series
databases, text databases, and multimedia databases.
Flat files: Flat files are actually the most common data source for data mining algorithms, especially at
the research level. Flat files are simple data files in text or binary format with a structure known by the
data mining algorithm to be applied. The data in these files can be transactions, time-series data, scientific
measurements, etc.
Relational Databases: a relational database consists of a set of tables containing either values of entity
attributes, or values of attributes from entity relationships. Tables have columns and rows, where columns
represent attributes and rows represent tuples. A tuple in a relational table corresponds to either an object
or a relationship between objects and is identified by a set of attribute values representing a unique key. In
following figure it presents some relations Customer, Items, and Borrow representing business activity in
a video store. These relations are just a subset of what could be a database for the video store and is given
as an example.
The most commonly used query language for relational database is SQL, which allows retrieval and
manipulation of the data stored in the tables, as well as the calculation of aggregate functions such as
average, sum, min, max and count. For instance, an SQL query to select the videos grouped by category
would be:
SELECT count(*) FROM Items WHERE type=video GROUP BY category.
Data mining algorithms using relational databases can be more versatile than data mining algorithms
specifically written for flat files, since they can take advantage of the structure inherent to relational
databases. While data mining can benefit from SQL for data selection, transformation and consolidation,
it goes beyond what SQL could provide, such as predicting, comparing, detecting deviations, etc.
Data warehouses
A data warehouse is a repository of information collected from multiple sources, stored under a unified
schema, and which usually resides at a single site. Data warehouses are constructed via a process of data
cleansing, data transformation, data integration, data loading, and periodic data refreshing. The figure
shows the basic architecture of a data warehouse
In order to facilitate decision making, the data in a data warehouse are organized around major subjects,
such as customer, item, supplier, and activity. The data are stored to provide information from a historical
perspective and are typically summarized.
A data warehouse is usually modeled by a multidimensional database structure, where each dimension
corresponds to an attribute or a set of attributes in the schema, and each cell stores the value of some
aggregate measure, such as count or sales amount. The actual physical structure of a data warehouse may
be a relational data store or a multidimensional data cube. It provides a multidimensional view of data and
allows the pre computation and fast accessing of summarized data.
The data cube structure that stores the primitive or lowest level of information is called a base cuboid. Its
corresponding higher level multidimensional (cube) structures are called (non-base) cuboids. A base
cuboid together with all of its corresponding higher level cuboids form a data cube. By providing
multidimensional data views and the precomputation of summarized data, data warehouse systems are
well suited for On-Line Analytical Processing, or OLAP. OLAP operations make use of background
knowledge regarding the domain of the data being studied in order to allow the presentation of data at
different levels of abstraction. Such operations accommodate different user viewpoints. Examples of
OLAP operations include drill-down and roll-up, which allow the user to view the data at differing
degrees of summarization, as illustrated in above figure.
Transactional databases
In general, a transactional database consists of a flat file where each record represents a transaction. A
transaction typically includes a unique transaction identity number (trans ID), and a list of the items
making up the transaction (such as items purchased in a store) as shown below:
Advanced database systems and advanced database applications
• An objected-oriented database is designed based on the object-oriented programming paradigm where

data are a large number of objects organized into classes and class hierarchies. Each entity in the database
is considered as an object. The object contains a set of variables that describe the object, a set of messages
that the object can use to communicate with other objects or with the rest of the database system and a set
of methods where each method holds the code to implement a message.
• A spatial database contains spatial-related data, which may be represented in the form of raster or
vector data. Raster data consists of n-dimensional bit maps or pixel maps, and vector data are represented
by lines, points, polygons or other kinds of processed primitives, Some examples of spatial databases
include geographical (map) databases, VLSI chip designs, and medical and satellite images databases.
• Time-Series Databases: Time-series databases contain time related data such stock market data or
logged activities. These databases usually have a continuous flow of new data coming in, which
sometimes causes the need for a challenging real time analysis. Data mining in such databases commonly
includes the study of trends and correlations between evolutions of different variables, as well as the
prediction of trends and movements of the variables in time.
• A text database is a database that contains text documents or other word descriptions in the form of
long sentences or paragraphs, such as product specifications, error or bug reports, warning messages,
summary reports, notes, or other documents.
• A multimedia database stores images, audio, and video data, and is used in applications such as picture
content-based retrieval, voice-mail systems, video-on-demand systems, the World Wide Web, and
speech-based user interfaces.
• The World-Wide Web provides rich, world-wide, on-line information services, where data objects are
linked together to facilitate interactive access. Some examples of distributed information services
associated with the World-Wide Web include America Online, Yahoo!, AltaVista, and Prodigy.
Data mining functionalities/Data mining tasks: what kinds of patterns can be mined?
Data mining functionalities are used to specify the kind of patterns to be found in data mining tasks. In
general, data mining tasks can be classified into two categories:
• Descriptive
• predictive
Descriptive mining tasks characterize the general properties of the data in the database. Predictive mining
tasks perform inference on the current data in order to make predictions.
Describe data mining functionalities, and the kinds of patterns they can discover
(or)
Define each of the following data mining functionalities: characterization, discrimination, association and
correlation analysis, classification, prediction, clustering, and evolution analysis. Give examples of each
data mining functionality, using a real-life database that you are familiar with.
1 Concept/class description: characterization and discrimination
Data can be associated with classes or concepts. It describes a given set of data in a concise and
summarative manner, presenting interesting general properties of the data. These descriptions can be
derived via
1. data characterization, by summarizing the data of the class under study (often called the
target class)
2. data discrimination, by comparison of the target class with one or a set of comparative
classes
3. both data characterization and discrimination
Data characterization
It is a summarization of the general characteristics or features of a target class of data.
Example:
A data mining system should be able to produce a description summarizing the characteristics of a student
who has obtained more than 75% in every semester; the result could be a general profile of the student.
Data Discrimination is a comparison of the general features of target class data objects with the general
features of objects from one or a set of contrasting classes.
Example
The general features of students with high GPA‟s may be compared with the general features of students
with low GPA‟s. The resulting description could be a general comparative profile of the students such as
75% of the students with high GPA‟s are fourth-year computing science students while 65% of the
students with low GPA‟s are not.
The output of data characterization can be presented in various forms. Examples include pie charts, bar
charts, curves, multidimensional data cubes, and multidimensional tables, including crosstabs. The
resulting descriptions can also be presented as generalized relations, or in rule form called characteristic
rules.
Discrimination descriptions expressed in rule form are referred to as discriminant rules.
2 Association
It is the discovery of association rules showing attribute-value conditions that occur frequently together in
a given set of data. For example, a data mining system may find association rules like
major(X, “computing science””) ⇒owns(X, “personal computer”)
[support = 12%, confidence = 98%]
where X is a variable representing a student. The rule indicates that of the students under study, 12%
(support) major in computing science and own a personal computer. There is a 98% probability
(confidence, or certainty) that a student in this group owns a personal computer.
Example:
A grocery store retailer to decide whether to but bread on sale. To help determine the impact of this
decision, the retailer generates association rules that show what other products are frequently purchased
with bread. He finds 60% of the times that bread is sold so are pretzels and that 70% of the time jelly is
also sold. Based on these facts, he tries to capitalize on the association between bread, pretzels, and jelly
by placing some pretzels and jelly at the end of the aisle where the bread is placed. In addition, he decides
not to place either of these items on sale at the same time.
3 Classification and prediction
Classification:
Classification:
 It predicts categorical class labels

 It classifies data (constructs a model) based on the training set and the values (class labels) in a
classifying attribute and uses it in classifying new data
 Typical Applications
o credit approval
o target marketing
o medical diagnosis
o treatment effectiveness analysis
Classification can be defined as the process of finding a model (or function) that describes and
distinguishes data classes or concepts, for the purpose of being able to use the model to predict the class
of objects whose class label is unknown. The derived model is based on the analysis of a set of training
data (i.e., data objects whose class label is known).
Example:
An airport security screening station is used to deter mine if passengers are potential terrorist or criminals.
To do this, the face of each passenger is scanned and its basic pattern(distance between eyes, size, and
shape of mouth, head etc) is identified. This pattern is compared to entries in a database to see if it
matches any patterns that are associated with known offenders
A classification model can be represented in various forms, such as
1) IF-THEN rules,
student ( class , "undergraduate") AND concentration ( level, "high") ==> class A
student (class ,"undergraduate") AND concentrtion (level,"low") ==> class B
student (class , "post graduate") ==> class C
2) Decision tree
3) Neural network.
Prediction:
Find some missing or unavailable data values rather than class labels referred to as prediction. Although
prediction may refer to both data value prediction and class label prediction, it is usually confined to data
value prediction and thus is distinct from classification. Prediction also encompasses the identification of
distribution trends based on the available data.
Example:
Predicting flooding is difficult problem. One approach is uses monitors placed at various points in the
river. These monitors collect data relevant to flood prediction: water level, rain amount, time, humidity
etc. These water levels at a potential flooding point in the river can be predicted based on the data
collected by the sensors upriver from this point. The prediction must be made with respect to the time the
data were collected.
Classification vs. Prediction
Classification differs from prediction in that the former is to construct a set of models (or functions) that
describe and distinguish data class or concepts, whereas the latter is to predict some missing or
unavailable, and often numerical, data values. Their similarity is that they are both tools for prediction:
Classification is used for predicting the class label of data objects and prediction is typically used for
predicting missing numerical data values.
4 Clustering analysis
Clustering analyzes data objects without consulting a known class label.
The objects are clustered or grouped based on the principle of maximizing the intraclass similarity and
minimizing the interclass similarity.
Each cluster that is formed can be viewed as a class of objects.
Clustering can also facilitate taxonomy formation, that is, the organization of observations into a
hierarchy of classes that group similar events together as shown below:
Are All the “Discovered” Patterns Interesting?
 A data mining system/query may generate thousands of patterns, not all of them are interesting.
o Suggested approach: Human-centered, query-based, focused mining
 Interestingness measures: A pattern is interesting if it is easily understood by humans, valid on new or

test data with some degree of certainty, potentially useful, novel, or validates some hypothesis that a user
seeks to confirm
 Objective vs. subjective interestingness measures:
o Objective: based on statistics and structures of patterns, e.g., support, confidence, etc.
o Subjective: based on user‟s belief in the data, e.g., unexpectedness, novelty, actionability, etc.
 Find all the interesting patterns: Completeness
o Can a data mining system find all the interesting patterns?
o Association vs. classification vs. clustering
 Search for only interesting patterns: Optimization
o Can a data mining system find only the interesting patterns?
o Highly desirable, progress has been made, but still a challenge
o Approaches
 First general all the patterns and then filter out the uninteresting ones.
 Generate only the interesting patterns—mining query optimization
Pattern evaluation: refers to interestingness of pattern: A data mining system can uncover thousands
of patterns. Many of the patterns discovered may be uninteresting to the given user, representing common
knowledge or lacking novelty. Several challenges remain regarding the development of techniques to
assess the interestingness of discovered patterns,
 Performance issues. These include efficiency, scalability, and parallelization of data mining
algorithms.
 Efficiency and scalability of data mining algorithms: To effectively extract information from
a huge amount of data in databases, data mining algorithms must be efficient and scalable.
 Parallel, distributed, and incremental updating algorithms: Such algorithms divide the data
into partitions, which are processed in parallel. The results from the partitions are then merged.
 3. Issues relating to the diversity of database types
 Handling of relational and complex types of data: Since relational databases and data
warehouses are widely used, the development of efficient and effective data mining systems for
such data is important.
 _ Mining information from heterogeneous databases and global information systems: Local
and wide-area computer networks (such as the Internet) connect many sources of data, forming
huge, distributed, and heterogeneous databases. The discovery of knowledge from different
sources of structured, semi-structured, or unstructured data with diverse data semantics poses
great challenges to data mining.
Consider a classic example of the following rule:
 IF (patient is pregnant) THEN (patient is female).
 This rule is very accurate and comprehensible, but it is not interesting, since it represents the
obvious. Another Example from real world data set,
 IF (used_seat_belt = „yes‟) THEN (injury = „no‟).......................................................(1)
 IF ((used_seat_belt = „yes‟) Λ (passenger = child)) THEN (injury = „yes‟)...............(2)
 Rule (1) is a general and an obvious rule. But rule (2) contradicts the knowledge represented
by rule (1) and so the user's belief. This kind of knowledge is unexpected from users preset
beliefs and it is always interesting to extract this interesting (or surprising) knowledge from
data sets. “Unexpectedness” means knowledge which is unexpected from the beliefs of users
i.e. A decision rule is considered to be interesting (or surprising) if it represents knowledge
that was not only previously unknown to the users but also contradicts the original beliefs of
the users.
 I hope, these examples may help you to understand the concept more clearly.
 Edit
Yes, firstly, discover the general rules and then discover exceptions to these general rules.
For example,
 A general rule : If bird then fly
 However, there are few exceptional birds like emu and penguin that do not fly. It would
definitely be valuable to discover such exceptions along with the rule, making the rule more
accurate, comprehensible as well as interesting.
Classification of data mining systems
There are many data mining systems available or being developed. Some are specialized systems
dedicated to a given data source or are confined to limited data mining functionalities, other are more
versatile and comprehensive. Data mining systems can be categorized according to various criteria among
other classification are the following:
· Classification according to the type of data source mined: this classification categorizes data mining
systems according to the type of data handled such as spatial data, multimedia data, time-series data, text
data, World Wide Web, etc.
· Classification according to the data model drawn on: this classification categorizes data mining
systems based on the data model involved such as relational database, object-oriented database, data
warehouse, transactional, etc.
· Classification according to the king of knowledge discovered: this classification categorizes data
mining systems based on the kind of knowledge discovered or data mining functionalities, such as
characterization, discrimination, association, classification, clustering, etc. Some systems tend to be
comprehensive systems offering several data mining functionalities together.
· Classification according to mining techniques used: Data mining systems employ and provide
different techniques. This classification categorizes data mining systems according to the data analysis
approach used such as machine learning, neural networks, genetic algorithms, statistics, visualization,
database oriented or data warehouse-oriented, etc. The classification can also take into account the degree
of user interaction involved in the data mining process such as query-driven systems, interactive
exploratory systems, or autonomous systems. A comprehensive system would provide a wide variety of
data mining techniques to fit different situations and options, and offer different degrees of user
interaction.
Five primitives for specifying a data mining task
• Task-relevant data: This primitive specifies the data upon which mining is to be performed. It involves
specifying the database and tables or data warehouse containing the relevant data, conditions for selecting
the relevant data, the relevant attributes or dimensions for exploration, and instructions regarding the
ordering or grouping of the data retrieved.
• Knowledge type to be mined: This primitive specifies the specific data mining function to be
performed, such as characterization, discrimination, association, classification, clustering, or evolution
analysis. As well, the user can be more specific and provide pattern templates that all discovered patterns
must match. These templates or meta patterns (also called meta rules or meta queries), can be used to
guide the discovery process.
• Background knowledge: This primitive allows users to specify knowledge they have about the domain
to be mined. Such knowledge can be used to guide the knowledge discovery process and evaluate the
patterns that are found. Of the several kinds of background knowledge, this chapter focuses on concept
hierarchies.
• Pattern interestingness measure: This primitive allows users to specify functions that are used to
separate uninteresting patterns from knowledge and may be used to guide the mining process, as well as
to evaluate the discovered patterns. This allows the user to confine the number of uninteresting patterns
returned by the process, as a data mining process may generate a large number of patterns. Interestingness
measures can be specified for such pattern characteristics as simplicity, certainty, utility and novelty.
• Visualization of discovered patterns: This primitive refers to the form in which discovered patterns
are to be displayed. In order for data mining to be effective in conveying knowledge to users, data mining
systems should be able to display the discovered patterns in multiple forms such as rules, tables, cross
tabs (cross-tabulations), pie or bar charts, decision trees, cubes or other visual representations.
Major issues in data mining
Major issues in data mining is regarding mining methodology, user interaction, performance, and diverse
data types
1 Mining methodology and user-interaction issues:
_ Mining different kinds of knowledge in databases: Since different users can be interested in different
kinds of knowledge, data mining should cover a wide spectrum of data analysis and knowledge discovery
tasks, including data characterization, discrimination, association, classification, clustering, trend and
deviation analysis, and similarity analysis. These tasks may use the same database in different ways and
require the development of numerous data mining techniques.
_ Interactive mining of knowledge at multiple levels of abstraction: Since it is difficult to know

exactly what can be discovered within a database, the data mining process should be interactive.
_ Incorporation of background knowledge: Background knowledge, or information regarding the

domain under study, may be used to guide the discovery patterns. Domain knowledge related to
databases, such as integrity constraints and deduction rules, can help focus and speed up a data mining
process, or judge the interestingness of discovered patterns.
_ Data mining query languages and ad-hoc data mining: Knowledge in Relational query languages
(such as SQL) required since it allow users to pose ad-hoc queries for data retrieval.
_ Presentation and visualization of data mining results: Discovered knowledge should be expressed in
high-level languages, visual representations, so that the knowledge can be easily understood and directly
usable by humans
_ Handling outlier or incomplete data: The data stored in a database may reflect outliers: noise,
exceptional cases, or incomplete data objects. These objects may confuse the analysis process, causing
over fitting of the data to the knowledge model constructed. As a result, the accuracy of the discovered
patterns can be poor. Data cleaning methods and data analysis methods which can handle outliers are
required.
_ Pattern evaluation: refers to interestingness of pattern: A data mining system can uncover
thousands of patterns. Many of the patterns discovered may be uninteresting to the given user,
representing common knowledge or lacking novelty. Several challenges remain regarding the
development of techniques to assess the interestingness of discovered patterns,
2. Performance issues. These include efficiency, scalability, and parallelization of data mining
algorithms.
_ Efficiency and scalability of data mining algorithms: To effectively extract information from a huge
amount of data in databases, data mining algorithms must be efficient and scalable.
_ Parallel, distributed, and incremental updating algorithms: Such algorithms divide the data into
partitions, which are processed in parallel. The results from the partitions are then merged.
3. Issues relating to the diversity of database types
_ Handling of relational and complex types of data: Since relational databases and data warehouses are
widely used, the development of efficient and effective data mining systems for such data is important.
_ Mining information from heterogeneous databases and global information systems: Local and
wide-area computer networks (such as the Internet) connect many sources of data, forming huge,
distributed, and heterogeneous databases. The discovery of knowledge from different sources of
structured, semi-structured, or unstructured data with diverse data semantics poses great challenges to
data mining.
Data Integration Information
Data Integration
Data integration involves combining data from several disparate sources, which are stored using various
technologies and provide a unified view of the data. Data integration becomes increasingly important in
cases of merging systems of two companies or consolidating applications within one company to provide
a unified view of the company's data assets.
Data Migration
Data Migration is the process of transferring data from one system to another while changing the storage,
database or application. In reference to the ETL (Extract-Transform-Load) process, data migration always
requires at least Extract and Load steps.
Data Synchronization
Data Synchronization is a process of establishing consistency among systems and subsequent continuous
updates to maintain consistency. The word 'continuous' should be stressed here as the data
synchronization should not be considered as a one-time task.
ETL
ETL comes from Data Warehousing and stands for Extract-Transform-Load. ETL covers a process of
how the data are loaded from the source system to the data warehouse.
Business Intelligence
Business Intelligence (BI) is a set of tools supporting the transformation of raw data into useful
information which can support decision making. Business Intelligence provides reporting functionality,
tools for identifying data clusters, support for data mining techniques, business performance management
and predictive analysis.
Master Data Management

Master Data Management (MDM) represents a set of tools and processes used by an enterprise to
consistently manage their non-transactional data.
DW and OLAP are essential elements of decision support. They are complementary technologies
- a DW stores and manages data while OLAP transforms the data into possibly strategic information.
Decision support usually requires consolidating data from many heterogeneous sources: these might
include external sources in addition to several operational databases. The different sources might contain
data of varying quality, or use inconsistent representations, codes and formats, which have to be
reconciled. Since data warehouses contain consolidated data, perhaps from several operational databases,
over potentially long periods of time, they tend to be orders of magnitude larger than operational
databases. In data warehouses historical and summarized data is more important than detailed. Many
organizations want to implement an integrated enterprise warehouse that collects information about all
subjects spanning the whole organization. Some organizations are settling for data marts instead, which
are departmental subsets focused on selected subjects (e.g., a marketing data mart, personnel data mart).
A popular conceptual model that influences the front-end tools, database design, and the query
engines for OLAP is the multidimensional view of data in the warehouse. In a multidimensional data
model, there is a set of numeric measures that are the objects of analysis. Examples of such measures are
sales, revenue, and profit. Each of the numeric measures depends on a set of dimensions, which provide
the context for the measure. For example, the dimensions associated with a sale amount can be the store,
product, and the date when the sale was made.
The dimensions together are assumed to uniquely determine the measure. Thus, the
multidimensional data views a measure as a value in the multidimensional space of dimensions. Often,
dimensions are hierarchical; time of sale may be organized as a day-month-quarter-year hierarchy,
product as a product-category-industry hierarchy [4].
Typical OLAP operations, also called cubing operation, include rollup (increasing the level of
aggregation) and drill-down (decreasing the level of aggregation or increasing detail) along one or more
dimension hierarchies, slicing (the extraction from a data cube of summarized data for a given dimension-
value), dicing (the extraction of a “sub-cube”, or intersection of several slices), and pivot (rotating of the
axes of a data cube so that one may examine a cube from different angles). Other technology, that can be
used for querying the warehouse is Data Mining.
Knowledge Discovery (KD) is a nontrivial process of identifying valid, novel, potentially useful,
and ultimately understandable patterns from large collections of data [6]. One of the KD steps is Data
Mining (DM). DM is the step that is concerned with the actual extraction of knowledge from data, in
contrast to the KD process that is concerned with many other things like understanding and preparation of
the data, verification of the mining results etc. In practice, however, people use terms DM and KD as
synonymous.
STORE ALL
(ALL, ALL, ALL)
Sofia
Toronto
ALL
food (ALL, books, Sofia)

PRODUCT
books
sports (ALL, clothing, ALL)
clothing
2001 2002 2003 2004 ALL

TIME
Mining Methodology & User Interaction Issues
1. Mining different kinds of knowledge in database.
 Different users-different knowledge-different way (with same database)
2. Interactive Mining of knowledge at multiple levels of abstraction.
 Focus the search patterns.
 Different angles.
3. Incorporation of background knowledge.
 Background & Domain knowledge.
4. Data mining query languages and ad hoc data mining
 High level data mining query language
 Conditions and constraints.
5. Presentation and visualization of data mining results.
 Use visual representations.
 Expressive forms like graph, chart, matrices, curves, tables, etc…
6. Handling noisy or incomplete data.
 Confuse the process
 Over fit the data (apply any outlier analysis, data cleaning methods)
7. Pattern evaluation- the interestingness problem.
 Pattern may be uninteresting to the user.
 Solve by user specified constraints.
Performance Issues
• Efficiency and scalability of data mining algorithms.
 Running time.
 Should be opt for huge amount of data.
• Parallel, Distributed and incremental mining algorithms.
 Huge size of database
 Wide distribution of data
 High cost
 Computational complexity
 Data mining methods
 Solve by; efficient algorithms.
Diversity of data Types Issues
• Handling of relational and complex types of data.
 One system-> to mine all kinds of data
 Specific data mining system should be constructed.
• Mining information from heterogeneous databases and global information systems.
 Web mining uncover knowledge about web contents, web structure, web usage and
web dynamics
Data preprocessing
Data preprocessing describes any type of processing performed on raw data to prepare it for another
processing procedure. Commonly used as a preliminary data mining practice, data preprocessing
transforms the data into a format that will be more easily and effectively processed for the purpose of the
user.
Data preprocessing describes any type of processing performed on raw data to prepare it for another
processing procedure. Commonly used as a preliminary data mining practice, data preprocessing
transforms the data into a format that will be more easily and effectively processed for the purpose of the
user
Why Data Preprocessing?
Data in the real world is dirty. It can be in incomplete, noisy and inconsistent from. These data needs to
be preprocessed in order to help improve the quality of the data, and quality of the mining results.
 If no quality data, then no quality mining results. The quality decision is always based on the quality
data.
 If there is much irrelevant and redundant information present or noisy and unreliable data, then
knowledge discovery during the training phase is more difficult
Incomplete data: lacking attribute values, lacking certain attributes of interest, or containing only
aggregate data. e.g., occupation=“ ”.
Noisy data: containing errors or outliers data. e.g., Salary=“-10”
Inconsistent data: containing discrepancies in codes or names. e.g., Age=“42” Birthday=“03/07/1997”
 Incomplete data may come from

 “Not applicable” data value when collected
 Different considerations between the time when the data was collected and when it is analyzed.
 Human/hardware/software problems
 Noisy data (incorrect values) may come from
 Faulty data collection by instruments
 Human or computer error at data entry
 Errors in data transmission
 Inconsistent data may come from
 Different data sources
 Functional dependency violation (e.g., modify some linked data)
Major Tasks in Data Preprocessing
 Data cleaning
 Fill in missing values, smooth noisy data, identify or remove outliers, and resolve inconsistencies
 Data integration
 Integration of multiple databases, data cubes, or files
 Data transformation
 Normalization and aggregation
 Data reduction
 Obtains reduced representation in volume but produces the same or similar analytical results
 Data discretization
 Part of data reduction but with particular importance, especially for numerical data
Forms of Data Preprocessing
Data cleaning:
Data cleaning routines attempt to fill in missing values, smooth out noise while identifying outliers, and
correct inconsistencies in the data.
Various methods for handling this problem:
The various methods for handling the problem of missing values in data tuples include:
(a) Ignoring the tuple: This is usually done when the class label is missing (assuming the mining task
involves classification or description). This method is not very effective unless the tuple contains several
attributes with missing values. It is especially poor when the percentage of missing values per attribute
varies considerably.
(b) Manually filling in the missing value: In general, this approach is time-consuming and may not be a
reasonable task for large data sets with many missing values, especially when the value to be filled in is
not easily determined.
(c) Using a global constant to fill in the missing value: Replace all missing attribute values by the same
constant, such as a label like “Unknown,” or −∞. If missing values are replaced by, say, “Unknown,” then
the mining program may mistakenly think that they form an interesting concept, since they all have a
value in common — that of “Unknown.” Hence, although this method is simple, it is not recommended.
(d) Using the attribute mean for quantitative (numeric) values or attribute mode for categorical
(nominal) values, for all samples belonging to the same class as the given tuple: For example, if
classifying customers according to credit risk, replace the missing value with the average income value
for customers in the same credit risk category as that of the given tuple.
(e) Using the most probable value to fill in the missing value: This may be determined with regression,
inference-based tools using Bayesian formalism, or decision tree induction. For example, using the other
customer attributes in your data set, you may construct a decision tree to predict the missing values for
income.
Noisy data:
Noise is a random error or variance in a measured variable. Data smoothing tech is used for removing
such noisy data.
Several Data smoothing techniques:
1 Binning methods: Binning methods smooth a sorted data value by consulting the neighborhood", or
values around it. The sorted values are distributed into a number of 'buckets', or bins. Because binning
methods consult the neighborhood of values, they perform local smoothing.
In this technique,
1. The data for first sorted

2. Then the sorted list partitioned into equi-depth of bins.
3. Then one can smooth by bin means, smooth by bin median, smooth by bin boundaries, etc.
a. Smoothing by bin means: Each value in the bin is replaced by the mean value of the bin.
b. Smoothing by bin medians: Each value in the bin is replaced by the bin median.
c. Smoothing by boundaries: The min and max values of a bin are identified as the bin
boundaries. Each bin value is replaced by the closest boundary value.
 Example: Binning Methods for Data Smoothing
o Sorted data for price (in dollars): 4, 8, 9, 15, 21, 21, 24, 25, 26, 28, 29, 34
o Partition into (equi-depth) bins(equi depth of 3 since each bin contains three values):
- Bin 1: 4, 8, 9, 15
- Bin 2: 21, 21, 24, 25
- Bin 3: 26, 28, 29, 34
o Smoothing by bin means:

- Bin 1: 9, 9, 9, 9
- Bin 2: 23, 23, 23, 23
- Bin 3: 29, 29, 29, 29
o Smoothing by bin boundaries:

- Bin 1: 4, 4, 4, 15
- Bin 2: 21, 21, 25, 25
- Bin 3: 26, 26, 26, 34
In smoothing by bin means, each value in a bin is replaced by the mean value of the bin. For example, the
mean of the values 4, 8, and 15 in Bin 1 is 9. Therefore, each original value in this bin is replaced by the
value 9. Similarly, smoothing by bin medians can be employed, in which each bin value is replaced by the
bin median. In smoothing by bin boundaries, the minimum and maximum values in a given bin are
identified as the bin boundaries. Each bin value is then replaced by the closest boundary value.
Suppose that the data for analysis include the attribute age. The age values for the data tuples are (in
increasing order): 13, 15, 16, 16, 19, 20, 20, 21, 22, 22, 25, 25, 25, 25, 30, 33, 33, 35, 35, 35, 35, 36, 40,
45, 46, 52, 70.
(a) Use smoothing by bin means to smooth the above data, using a bin depth of 3. Illustrate your steps.
Comment on the effect of this technique for the given data.
The following steps are required to smooth the above data using smoothing by bin means with a bin
depth of 3.
• Step 1: Sort the data. (This step is not required here as the data are already sorted.)
• Step 2: Partition the data into equidepth bins of depth 3.

Bin 1: 13, 15, 16 Bin 2: 16, 19, 20 Bin 3: 20, 21, 22
Bin 4: 22, 25, 25 Bin 5: 25, 25, 30 Bin 6: 33, 33, 35
Bin 7: 35, 35, 35 Bin 8: 36, 40, 45 Bin 9: 46, 52, 70
• Step 3: Calculate the arithmetic mean of each bin.
• Step 4: Replace each of the values in each bin by the arithmetic mean calculated for the bin.
Bin 1: 14, 14, 14 Bin 2: 18, 18, 18 Bin 3: 21, 21, 21
Bin 4: 24, 24, 24 Bin 5: 26, 26, 26 Bin 6: 33, 33, 33
Bin 7: 35, 35, 35 Bin 8: 40, 40, 40 Bin 9: 56, 56, 56
2 Clustering: Outliers in the data may be detected by clustering, where similar values are organized into
groups, or „clusters‟. Values that fall outside of the set of clusters may be considered outliers.
3 Regression : smooth by fitting the data into regression functions.
 Linear regression involves finding the best of line to fit two variables, so that one variable
can be used to predict the other.
 Multiple linear regression is an extension of linear regression, where more than two
variables are involved and the data are fit to a multidimensional surface.
Using regression to find a mathematical equation to fit the data helps smooth out the noise.
Field overloading: is a kind of source of errors that typically occurs when developers compress new
attribute definitions into unused portions of already defined attributes.
Unique rule is a rule says that each value of the given attribute must be different from all other values of
that attribute
Consecutive rule is a rule says that there can be no missing values between the lowest and highest values
of the attribute and that all values must also be unique.
Null rule specifies the use of blanks, question marks, special characters or other strings that may indicate
the null condition and how such values should be handled.
UNIT IV
ASSOCIATION RULE MINING AND CLASSIFICATION
Market Basket Analysis: A Motivating Example
A typical example of frequent itemset mining is market basket analysis. This process analyzes customer
buying habits by finding associations between the different items that customers place in their ―shopping
baskets‖ (Figure 5.1). The discovery of such associations can help retailers develop marketing strategies by
gaining insight into which items are frequently purchased together by customers. For instance, if customers are
buying milk, how likely are they to also buy bread (and what kind of bread) on the same trip to the supermarket?
Such information can lead to increased sales by helping retailers do selective marketing and plan their shelf
space.
If we think of the universe as the set of items available at the store, then each item has a Boolean
variable representing the presence or absence of that item. Each basket can then be represented by a Boolean
vector of values assigned to these variables. The Boolean vectors can be analyzed for buying patterns that reflect
items that are frequently associated or purchased together. These patterns can be represented in the form of
association rules. For example, the information that customers who purchase computers also tend to buy
antivirus software at the same time is represented in Association Rule (5.1) below:
Computer =>antivirus software [support = 2%; confidence = 60%] (5.1)
Rule support and confidence are two measures of rule interestingness. They respectively reflect the usefulness and
certainty of discovered rules. A support of 2% for Association Rule (5.1) means that 2% of all the transactions under
analysis show that computer and antivirus software are purchased together. A confidence of 60% means that 60% of the
customers who purchased a computer also bought the software. Typically, association rules are considered interesting if they
satisfy both a minimum support threshold and a minimum confidence threshold. Such thresholds can be set by users or
domain experts. Additional analysis can be performed to uncover interesting statistical correlations between associated
items.
Frequent Itemsets, Closed Itemsets, and Association Rules
 A set of items is referred to as an itemset.

 An itemset that contains k items is a k-itemset.
 The set {computer, antivirus software} is a 2-itemset.
 The occurrence frequency of an itemset is the number of transactions that contain the itemset.
This is also known, simply, as the frequency, support count, or count of the itemset.
\
 Rules that satisfy both a minimum support threshold (min sup) and a minimum confidence
threshold (min conf) are called Strong Association Rules.
In general, association rule mining can be viewed as a two-step process:
1. Find all frequent itemsets: By definition, each of these itemsets will occur at least as frequently as a
predetermined minimum support count, min_sup.
2. Generate strong association rules from the frequent itemsets: By definition, these rules must satisfy
minimum support and minimum confidence.
The Apriori Algorithm: Finding Frequent Itemsets Using Candidate Generation

Apriori is a seminal algorithm proposed by R. Agrawal and R. Srikant in 1994 for mining frequent itemsets for
Boolean association rules. The name of the algorithm is based on the fact that the algorithm uses prior knowledge
of frequent itemset properties, as we shall see following. Apriori employs an iterative approach known as a level-
wise search, where k-itemsets are used to explore (k+1)-itemsets. First, the set of frequent 1-itemsets is found by
scanning the database to accumulate the count for each item, and collecting those items that satisfy minimum
support. The resulting set is denoted L1.Next, L1 is used to find L2, the set of frequent 2-itemsets, which is used to
find L3, and so on, until no more frequent k-itemsets can be found. The finding of each Lk requires one full scan of
the database.
To improve the efficiency of the level-wise generation of frequent itemsets, an important property called the
Apriori property, presented below, is used to reduce the search space. We will first describe this property, and then
show an example illustrating its use.
Apriori property: All nonempty subsets of a frequent itemset must also be frequent.
A two-step process is followed, consisting of join and prune actions
Generating Association Rules from Frequent Itemsets
Once the frequent itemsets from transactions in a database D have been found, it is straightforward to generate
strong association rules from them (where strong association rules satisfy both minimum support and minimum
confidence). This can be done using Equation (5.4) for confidence, which we show again here for completeness:
FP-Growth Method: Mining Frequent Itemsets without Candidate Generation
As we have seen, in many cases the Apriori candidate generate-and-test method significantly reduces the size of
candidate sets, leading to good performance gain.
An interesting method in this attempt is called frequent-pattern growth, or simply FP-growth, which adopts a
divide-and-conquer strategy as follows. First, it compresses the database representing frequent items into a
frequent-pattern tree, or FP-tree, which retains the itemset association information. It then divides the compressed
database into a set of conditional databases (a special kind of projected database), each associated with one
frequent item or ―pattern fragment,‖ and mines each such database separately. You’ll see how it works with the
following example.
Example 5.5 FP-growth (finding frequent itemsets without candidate generation). We re-examine the mining of
transaction database, D, of Table 5.1 in Example 5.3 using the frequent pattern growth approach.
Figure 5.7 An FP-tree registers compressed, frequent pattern information.
Figure 5.9 The FP-growth algorithm for discovering frequent item sets without candidate generation.
Mining Various Kinds of Association Rules

1) Mining Multilevel Association Rules
For many applications, it is difficult to find strong associations among data items at low or primitive levels of
abstraction due to the sparsity of data at those levels. Strong associations discovered at high levels of abstraction may
represent commonsense knowledge. Moreover, what may represent common sense to one user may seem novel to another.
Therefore, data mining systems should provide capabilities for mining association rules at multiple levels of abstraction,
with sufficient flexibility for easy traversal among different abstraction spaces.
Let’s examine the following example.
Mining multilevel association rules. Suppose we are given the task-relevant set of transactional data in Table for
sales in an AllElectronics store, showing the items purchased for each transaction. The concept hierarchy for the items is
shown in Figure 5.10. A concept hierarchy defines a sequence of mappings from a set of low-level concepts to higher level,
more general concepts. Data can be generalized by replacing low-level concepts
within the data by their higher-level concepts, or ancestors, from a concept hierarchy.
Figure 5.10 A concept hierarchy for AllElectronics computer items.
Association rules generated from mining data at multiple levels of abstraction are called multiple-level or
multilevel association rules. Multilevel association rules can be mined efficiently using concept hierarchies under a support-
confidence framework. In general, a top-down strategy is employed, where counts are accumulated for the calculation of
frequent itemsets at each concept level, starting at the concept level 1 and working downward in the hierarchy toward the
more specific concept levels, until no more frequent itemsets can be found. For each level, any algorithm for discovering
frequent itemsets may be used, such as Apriori or its variations.
 Using uniform minimum support for all levels (referred to as uniform support): The same minimum
support threshold is used when mining at each level of abstraction. For example, in Figure 5.11, a
minimum support threshold of 5% is used throughout (e.g., for mining from “computer” down to “laptop
computer”). Both “computer” and “laptop computer” are found to be frequent, while “desktop
computer” is not.
When a uniform minimum support threshold is used, the search procedure is simplified. The method is
also simple in that users are required to specify only one minimum support threshold. An Apriori-like
optimization technique can be adopted, based on the knowledge that an ancestor is a superset of its
descendants: The search avoids examining itemsets containing any item whose ancestors do not have
minimum support.
 Using reduced minimum support at lower levels (referred to as reduced support): Each level of
abstraction has its own minimum support threshold. The deeper the level of abstraction, the smaller the
corresponding threshold is. For example, in Figure, the minimum support thresholds for levels 1 and 2 are
5% and 3%, respectively. In this way, “computer,” “laptop computer,” and “desktop computer” are all
considered frequent.
 Using item or group-based minimum support (referred to as group-based support): Because users or
experts often have insight as to which groups are more important than others, it is sometimes more
desirable to set up user-specific, item, or group based minimal support thresholds when mining multilevel
rules. For example, a user could set up the minimum support thresholds based on product price, or on
items of interest, such as by setting particularly low support thresholds for laptop computers and flash
drives in order to pay particular attention to the association patterns containing items in these categories.
2) Mining Multidimensional Association Rules from Relational Databases and DataWarehouses
We have studied association rules that imply a single predicate, that is, the predicate buys. For instance, in mining our
AllElectronics database, we may discover the Boolean association rule
Following the terminology used in multidimensional databases, we refer to each distinct predicate in a rule as a
dimension. Hence, we can refer to Rule above as a single dimensional or intra dimensional association rule because it
contains a single distinct predicate (e.g., buys)with multiple occurrences (i.e., the predicate occurs more than once within the
rule). As we have seen in the previous sections of this chapter, such rules are commonly mined from transactional data.
Considering each database attribute or warehouse dimension as a predicate, we can therefore mine association rules
containing multiple predicates, such as
Association rules that involve two or more dimensions or predicates can be referred to as multidimensional
association rules. Rule above contains three predicates (age, occupation, and buys), each of which occurs only once in the
rule. Hence, we say that it has no repeated predicates. Multidimensional association rules with no repeated predicates are
called inter dimensional association rules. We can also mine multidimensional association rules with repeated predicates,
which contain multiple occurrences of some predicates. These rules are called hybrid-dimensional association rules. An
example of such a rule is the following, where the predicate buys is repeated:
Note that database attributes can be categorical or quantitative. Categorical attributes have a finite number of
possible values, with no ordering among the values (e.g., occupation, brand, color). Categorical attributes are also called
nominal attributes, because their values are ―names of things.‖ Quantitative attributes are numeric and have an implicit
ordering among values (e.g., age, income, price). Techniques for mining multidimensional association rules can be
categorized into two basic approaches regarding the treatment of quantitative attributes.
Mining Multidimensional Association Rules Using Static Discretization of

Quantitative Attributes
Quantitative attributes, in this case, are discretized before mining using predefined concept hierarchies or data
discretization techniques, where numeric values are replaced by interval labels. Categorical attributes may also be
generalized to higher conceptual levels if desired. If the resulting task-relevant data are stored in a relational table, then any
of the frequent itemset mining algorithms we have discussed can be modified easily so as to find all frequent predicate sets
rather than frequent itemsets. In particular, instead of searching on only one attribute like buys, we need to search through
all of the relevant attributes, treating each attribute-value pair as an itemset.
Mining Quantitative Association Rules

Quantitative association rules are multidimensional association rules in which the numeric attributes are
dynamically discretized during the mining process so as to satisfy some mining criteria, such as maximizing the confidence
or compactness of the rules mined. In this section, we focus specifically on how to mine quantitative association rules
having two quantitative attributes on the left-hand side of the rule and one categorical attribute on the right-hand side of the
rule. That is,
where Aquan1 and Aquan2 are tests on quantitative attribute intervals (where the intervals are dynamically determined), and
Acat tests a categorical attribute from the task-relevant data. Such rules have been referred to as two-dimensional quantitative
association rules, because they contain two quantitative dimensions. For instance, suppose you are curious about the
association relationship between pairs of quantitative attributes, like customer age and income, and the type of television
(such as high-definition TV, i.e., HDTV) that customers like to buy. An example of such a 2-D quantitative association rule
is
Binning: Quantitative attributes can have a very wide range of values defining their domain. Just think about how big a 2-D
grid would be if we plotted age and income as axes, where each possible value of age was assigned a unique position on one
axis, and similarly, each possible value of income was assigned a unique position on the other axis! To keep grids down to a
manageable size, we instead partition the ranges of quantitative attributes into intervals. These intervals are dynamic in that
they may later be further combined during the mining process. The partitioning process is referred to as binning, that is,
where the intervals are considered ―bins.‖ Three common binning strategies area as follows:
Finding frequent predicate sets: Once the 2-D array containing the count distribution for each category is set up, it can be
scanned to find the frequent predicate sets (those satisfying minimum support) that also satisfy minimum confidence. Strong
association rules can then be generated from these predicate sets, using a rule generation algorithm.
From Association Mining to Correlation Analysis

Most association rule mining algorithms employ a support-confidence framework. Often, many interesting rules
can be found using low support thresholds. Although minimum support and confidence thresholds help weed out or exclude
the exploration of a good number of uninteresting rules, many rules so generated are still not interesting to the users.
Unfortunately, this is especially true when mining at low support thresholds or mining for long patterns. This has been one
of the major bottlenecks for successful application of association rule mining.
1)Strong Rules Are Not Necessarily Interesting: An Example
Whether or not a rule is interesting can be assessed either subjectively or objectively. Ultimately, only the user can
judge if a given rule is interesting, and this judgment, being subjective, may differ from one user to another. However,
objective interestingness measures, based on the statistics ―behind‖ the data, can be used as one step toward the goal of
weeding out uninteresting rules from presentation to the user.
The support and confidence measures are insufficient at filtering out uninteresting association rules. To tackle this
weakness, a correlation measure can be used to augment the support-confidence framework for association rules. This leads
to correlation rules of the form
That is, a correlation rule is measured not only by its support and confidence but also by the correlation between
itemsets A and B. There are many different correlation measures from which to choose. In this section, we study various
correlation measures to determine which would be good for mining large data sets.
Constraint-Based Association Mining

A data mining process may uncover thousands of rules from a given set of data, most of which end up being
unrelated or uninteresting to the users. Often, users have a good sense of which ―direction‖ of mining may lead to interesting
patterns and the ―form‖ of the patterns or rules they would like to find. Thus, a good heuristic is to have the users specify
such intuition or expectations as constraints to confine the search space. This strategy is known as constraint-based mining.
The constraints can include the following:
1) Metarule-Guided Mining of Association Rules

“How are metarules useful?” Metarules allow users to specify the syntactic form of rules that they are interested in
mining. The rule forms can be used as constraints to help improve the efficiency of the mining process. Metarules may be
based on the analyst’s experience, expectations, or intuition regarding the data or may be automatically generated based on
the database schema.
Metarule-guided mining:- Suppose that as a market analyst for AllElectronics, you have access to the data describing
customers (such as customer age, address, and credit rating) as well as the list of customer transactions. You are interested
in finding associations between customer traits and the items that customers buy. However, rather than finding all of the
association rules reflecting these relationships, you are particularly interested only in determining which pairs of customer
traits promote the sale of office software.A metarule can be used to specify this information describing the form of rules you
are interested in finding. An example of such a metarule is
where P1 and P2 are predicate variables that are instantiated to attributes from the given database during the mining
process, X is a variable representing a customer, and Y and W take on values of the attributes assigned to P1 and P2,
respectively. Typically, a user will specify a list of attributes to be considered for instantiation with P1 and P2. Otherwise, a
default set may be used.
2) Constraint Pushing: Mining Guided by Rule Constraints

Rule constraints specify expected set/subset relationships of the variables in the mined rules, constant initiation of
variables, and aggregate functions. Users typically employ their knowledge of the application or data to specify rule
constraints for the mining task. These rule constraints may be used together with, or as an alternative to, metarule-guided
mining. In this section, we examine rule constraints as to how they can be used to make the mining process more efficient.
Let’s study an example where rule constraints are used to mine hybrid-dimensional association rules.
Our association mining query is to “Find the sales of which cheap items (where the sum of the prices is less than $100)
may promote the sales of which expensive items (where the minimum price is $500) of the same group for Chicago
customers in 2004.” This can be expressed in the DMQL data mining query language as follows,
Classification and Prediction
What Is Classification? What Is Prediction?
A bank loans officer needs analysis of her data in order to learn which loan applicants are ―safe‖ and
which are ―risky‖ for the bank. A marketing manager at AllElectronics needs data analysis to help guess whether
a customer with a given profile will buy a new computer. A medical researcher wants to analyze breast cancer
data in order to predict which one of three specific treatments a patient should receive. In each of these examples,
the data analysis task is classification, where a model or classifier is constructed to predict categorical labels,
such as ―safe‖ or ―risky‖ for the loan application data; ―yes‖ or ―no‖ for the marketing data; or ―treatment A,‖
―treatment B,‖ or ―treatment C‖ for the medical data. These categories can be represented by discrete values,
where the ordering among values has no meaning. For example, the values 1, 2, and 3 may be used to represent
treatments A, B, and C, where there is no ordering implied among this group of treatment regimes.
Suppose that the marketing manager would like to predict how much a given customer will spend during
a sale at AllElectronics. This data analysis task is an example of numeric prediction, where the model constructed
predicts a continuous-valued function, or ordered value, as opposed to a categorical label. This model is a
predictor
“How does classification work? Data classification is a two-step process, as shown for the loan
application data of Figure 6.1. (The data are simplified for illustrative purposes. In reality, we may expect many
more attributes to be considered.) In the first step, a classifier is built describing a predetermined set of data
classes or concepts. This is the learning step (or training phase), where a classification algorithm builds the
classifier by analyzing or ―learning from‖ a training set made up of database tuples and their associated class
labels.
Issues Regarding Classification and Prediction
Data cleaning: This refers to the preprocessing of data in order to remove or reduce noise (by applying
smoothing techniques, for example) and the treatment of missing values (e.g., by replacing a missing
value with the most commonly occurring value for that attribute, or with the most probable value based
on statistics). Although most classification algorithms have some mechanisms for handling noisy or
missing data, this step can help reduce confusion during learning.
 Relevance analysis: Many of the attributes in the data may be redundant. Correlation analysis can be
used to identify whether any two given attributes are statistically related. For example, a strong
correlation between attributes A1 and A2 would suggest that one of the two could be removed from
further analysis. A database may also contain irrelevant attributes. Attribute subset selection4 can be
used in these cases to find a reduced set of attributes such that the resulting probability distribution of the
data classes is as close as possible to the original distribution obtained using all attributes. Hence,
relevance analysis, in the form of correlation analysis and attribute subset selection, can be used to detect
attributes that do not contribute to the classification or prediction task. Including such attributes may
otherwise slow down, and possibly mislead, the learning step. Ideally, the time spent on relevance
analysis, when added to the time spent on learning from the resulting ―reduced‖ attribute (or feature)
subset, should be less than the time that would have been spent on learning from the original set of
attributes. Hence, such analysis can help improve classification efficiency and scalability.
 Data transformation and reduction: The data may be transformed by normalization, particularly when
neural networks or methods involving distance measurements are used in the learning step.
Normalization involves scaling all values for a given attribute so that they fall within a small specified
range, such as -1.0 to 1.0, or 0.0 to 1.0. In methods that use distance measurements, for example, this
would prevent attributes with initially large ranges (like, say, income) from out weighing attributes with
initially smaller ranges (such as binary attributes).
Comparing Classification and Prediction Methods
Classification and prediction methods can be compared and evaluated according to the following criteria:
 Accuracy
 Speed
 Robustness
 Scalability
 Interpretability
Learning Systems
 Learning systems consider
 Solved cases - cases assigned to a class
 Information from the solved cases - general decision rules
 Rules - implemented in a model
 Model - applied to new cases
 Different types of models - present their results in various forms
 Linear discriminant model - mathematical equation (p = ax1 + bx2 + cx3 + dx4 + ex5).
 Presentation comprehensibility
Decision Trees
An Algorithm for Building Decision Trees
1. Let T be the set of training instances.
2. Choose an attribute that best differentiates the instances contained in T.
3. Create a tree node whose value is the chosen attribute. Create child links from this node where each link
represents a unique value for the chosen attribute. Use the child link values to further subdivide the instances
into subclasses
4. For each subclass created in step 3:
a. If the instances in the subclass satisfy predefined criteria or if the set of remaining attribute choices for
this path of the tree is null, specify the classification for new instances following this decision path.
b. If the subclass does not satisfy the predefined criteria and there is at least one attribute to further
subdivide the path of the tree, let T be the current set of subclass instances and return to step 2.
Information gain
ID3 uses information gain as its attribute selection measure.
Information gain is defined as the difference between the original information requirement (i.e., based on just the
proportion of classes) and the new requirement (i.e., obtained after partitioning on A). That is,
In other words, Gain(A) tells us how much would be gained by branching on A. It is the expected reduction in the
information requirement caused by knowing the value of A. The attribute A with the highest information gain, (Gain(A)), is
chosen as the splitting attribute at node N.
Decision Tree Rules
IF Age <= 43 & Sex = Male & Credit Card Insurance = No
THEN Life Insurance Promotion = No
IF Sex = Male & Credit Card Insurance = No
THEN Life Insurance Promotion = No
General Considerations
Here is a list of a few of the many advantages decision trees have to offer.
 Decision trees are easy to understand and map nicely to a set of production rules.
 Decision trees have been successfully applied to real problems.
 Decision trees make no prior assumptions about the nature of the data.
Decision trees are able to build models with datasets containing numerical as well as categorical data.
As with all data mining algorithms, there are several issues surrounding decision tree usage. Specifically,
• Output attributes must be categorical, and multiple output attributes are not allowed.
• Decision tree algorithms are unstable in that slight variations in the training data can result in different
attribute selections at each choice point with in the tree. The effect can be significant as attribute choices
affect all descendent subtrees.
• Trees created from numeric datasets can be quite complex as attribute splits for numeric data are
typically binary.
Classification by Decision Tree Induction
• Decision tree
– A flow-chart-like tree structure
– Internal node denotes a test on an attribute
– Branch represents an outcome of the test
– Leaf nodes represent class labels or class distribution
• Decision tree generation consists of two phases
– Tree construction
• At start, all the training examples are at the root
• Partition examples recursively based on selected attributes
– Tree pruning
• Identify and remove branches that reflect noise or outliers
• Use of decision tree: Classifying an unknown sample
Test the attribute values of the sample against the decision tree.
Classification in Large Databases
• Classification—a classical problem extensively studied by statisticians and machine learning researchers
• Scalability: Classifying data sets with millions of examples and hundreds of attributes with reasonable
speed
• Why decision tree induction in data mining?
– relatively faster learning speed (than other classification methods)
– convertible to simple and easy to understand classification rules
– can use SQL queries for accessing databases Comparable classification accuracy with other
methods
Bayesian Classification: Why?
 Probabilistic learning: Calculate explicit probabilities for hypothesis, among the most practical
approaches to certain types of learning problems
 Incremental: Each training example can incrementally increase/decrease the probability that a
hypothesis is correct. Prior knowledge can be combined with observed data.
 Probabilistic prediction: Predict multiple hypotheses, weighted by their probabilities
 Standard: Even when Bayesian methods are computationally intractable, they can provide a standard of
optimal decision making against which other methods can be measured
Bayesian Theorem
 Given training data D, posteriori probability of a hypothesis h, P(h|D) follows the Bayes theorem
P(h | D)  P(D | h)P(h)

P(D)
 MAP (maximum posteriori) hypothesis
h  arg max P(h | D)  arg max P(D | h)P(h).

MAP hH hH
 Practical difficulty: require initial knowledge of many probabilities, significant computational cost
Naïve Bayes Classifier (I)
 A simplified assumption: attributes are conditionally independent:

n
P (C j | V )  P (C j ) P (vi | C j )
i 1
 Greatly reduces the computation cost, only count the class distribution.
Naive Bayesian Classifier (II)
 Given a training set, we can compute the probabilities

Outlook P N Humidity P N
sunny 2/9 3/5 high 3/9 4/5
overcast 4/9 0 normal 6/9 1/5
rain 3/9 2/5
Tempreature W indy
hot 2/9 2/5 true 3/9 3/5
mild 4/9 2/5 false 6/9 2/5
cool 3/9 1/5
Bayesian classification
 The classification problem may be formalized using a-posteriori probabilities:

 P(C|X) = prob. that the sample tuple X=<x1,…,xk> is of class C.
 E.g. P(class=N | outlook=sunny,windy=true,…)
 Idea: assign to sample X the class label C such that P(C|X) is maximal
Estimating a-posteriori probabilities
 Bayes theorem:
o P(C|X) = P(X|C)·P(C) / P(X)
 P(X) is constant for all classes
 P(C) = relative freq of class C samples
 C such that P(C|X) is maximum =

C such that P(X|C)·P(C) is maximum
 Problem: computing P(X|C) is unfeasible!
Naïve Bayesian Classification
 Naïve assumption: attribute independence
o P(x1,…,xk|C) = P(x1|C)·…·P(xk|C)
 If i-th attribute is categorical:

P(xi|C) is estimated as the relative freq of samples having value xi as i-th attribute in class C
 If i-th attribute is continuous:

P(xi|C) is estimated thru a Gaussian density function
 Computationally easy in both cases
Play-tennis example: estimating P(xi|C) Outlook Temperature Humidity Windy Class

Outlook Temperature Humidity Windy Class sunny hot high false N
sunny hot high false N sunny hot high true N
sunny hot high true N overcast hot high false P
overcast hot high false P rain mild high false P
rain mild high false P
rain cool normal false P
rain cool normal false P
rain cool normal true N
rain cool normal true N
overcast cool normal true P overcast cool normal true P
sunny mild high false N sunny mild high false N
sunny cool normal false P sunny cool normal false P
rain mild normal false P rain mild normal false P
sunny mild normal true P sunny mild normal true P
overcast mild high true P overcast mild high true P
overcast hot normal false P
overcast hot normal false P
rain mild high true N
rain mild high true N
P(p) = 9/14
P(n) = 5/14
Play-tennis example: classifying X
 An unseen sample X = <rain, hot, high, false>

 P(X|p)·P(p) =
P(rain|p)·P(hot|p)·P(high|p)·P(false|p)·P(p) = 3/9·2/9·3/9·6/9·9/14 = 0.010582
 P(X|n)·P(n) =
P(rain|n)·P(hot|n)·P(high|n)·P(false|n)·P(n) = 2/5·2/5·4/5·2/5·5/14 = 0.018286
 Sample X is classified in class n (don’t play)
The independence hypothesis…
 … makes computation possible
 … yields optimal classifiers when satisfied
 … but is seldom satisfied in practice, as attributes (variables) are often correlated.
 Attempts to overcome this limitation:
o Bayesian networks, that combine Bayesian reasoning with causal relationships between
attributes
o Decision trees, that reason on one attribute at the time, considering most important
attributes first
Bayesian Belief Networks (I)
Bayesian Belief Networks (II)
 Bayesian belief network allows a subset of the variables conditionally independent

 A graphical model of causal relationships
 Several cases of learning Bayesian belief networks
o Given both network structure and all the variables: easy
o Given network structure but only some variables
o When the network structure is not known in advance.
Classification Rules
�“if…then…” rules
(Blood Type=Warm) ∧ (Lay Eggs=Yes) → Birds
(Taxable_Income < 50K) ∧ (Refund=Yes) → Evade=No
�Rule: (Condition) → y
– where
�Condition is a conjunction of attribute tests
(A1 = v1) and (A2 = v2) and … and (An = vn)
�y is the class label
– LHS: rule antecedent or condition
– RHS: rule consequent
Rule-based Classifier (Example)
Neural Networks
 Advantages
o prediction accuracy is generally high
o robust, works when training examples contain errors
o output may be discrete, real-valued, or a vector of several discrete or real-valued attributes
o fast evaluation of the learned target function
 Criticism
o long training time
o difficult to understand the learned function (weights)
o not easy to incorporate domain knowledge
A Neuron:
 The n-dimensional input vector x is mapped into variable y by means of the scalar product and a
nonlinear function mapping
Network Training:
 The ultimate objective of training
o obtain a set of weights that makes almost all the tuples in the training data classified correctly
 Steps
o Initialize weights with random values
o Feed the input tuples into the network one by one
o For each unit
 Compute the net input to the unit as a linear combination of all the inputs to the unit
 Compute the output value using the activation function
 Compute the error
 Update the weights and the bias.
Multi-Layer Perceptron
Network Pruning and Rule Extraction:
 Network pruning
o Fully connected network will be hard to articulate
o N input nodes, h hidden nodes and m output nodes lead to h(m+N) weights
o Pruning: Remove some of the links without affecting classification accuracy of the network
 Extracting rules from a trained network
o Discretize activation values; replace individual activation value by the cluster average
maintaining the network accuracy
o Enumerate the output from the discretized activation values to find rules between activation
value and output
o Find the relationship between the input and activation value
o Combine the above two to have rules relating the output to input.
Outline
• What do we mean with classification, why is it useful
• Machine learning- basic concept
• Support Vector Machines (SVM)
– Linear SVM – basic terminology and some formulas
– Non-linear SVM – the Kernel trick
• An example: Predicting protein subcellular location with SVM
• Performance measurments
Classification
• Everyday, all the time we classify things.
• Eg crossing the street:
– Is there a car coming?
– At what speed?
– How far is it to the other side?
– Classification: Safe to walk or not!!!
Classification tasks
• Learning Task
– Given: Expression profiles of leukemia patients and healthy persons.
– Compute: A model distinguishing if a person has leukemia from expression data.
• Classification Task
– Given: Expression profile of a new patient + a learned model
– Determine: If a patient has leukemia or not.
Problems in classifying data
• Often high dimension of data.
• Hard to put up simple rules.
• Amount of data.
• Need automated ways to deal with the data.
• Use computers – data processing, statistical analysis, try to learn patterns from the data (Machine Learning)
Black box view of Machine Learning
Training data: -Expression patterns of some cancer + expression data from healty person
Model: - The model can distinguish between healty and sick persons. Can be used for prediction.
Tennis example 2
Linearly Separable Classes
Linear Support Vector Machines
Selection of a Good Hyper-Plane:
Problems with linear SVM
Associative Classification: Classification by Association Rule Analysis

Frequent patterns and their corresponding association or correlation rules characterize interesting
relationships between attribute conditions and class labels, and thus have been recently used for effective
classification. Association rules show strong associations between attribute-value pairs (or items) that occur
frequently in a given data set. Association rules are commonly used to analyze the purchasing patterns of
customers in a store. Such analysis is useful in many decision-making processes, such as product placement,
catalog design, and cross-marketing.
The discovery of association rules is based on frequent item set mining. Many methods for frequent item
set mining and the generation of association rules were described in Chapter 5. In this section, we look at
associative classification, where association rules are generated and analyzed for use in classification. The
general idea is that we can search for strong associations between frequent patterns (conjunctions of attribute-
value pairs) and class labels. Because association rules explore highly confident associations among multiple
attributes, this approach may overcome some constraints introduced by decision tree induction, which considers
only one attribute at a time. In many studies, associative classification has been found to be more accurate than
some traditional classification methods, such as C4.5. In particular, we study three main methods: CBA, CMAR,
and CPAR.
Association-Based Classification:
 Several methods for association-based classification

o ARCS: Quantitative association mining and clustering of association rules (Lent et al’97)
 It beats C4.5 in (mainly) scalability and also accuracy
o Associative classification: (Liu et al’98)
 It mines high support and high confidence rules in the form of ―cond_set => y‖, where y
is a class label
o CAEP (Classification by aggregating emerging patterns) (Dong et al’99)
 Emerging patterns (EPs): the itemsets whose support increases significantly from one
class to another
 Mine Eps based on minimum support and growth rate.
Lazy Learners (or Learning from Your Neighbors)

The classification methods discussed so far in this chapter—decision tree induction, Bayesian
classification, rule-based classification, classification by back propagation, support vector machines, and
classification based on association rule mining—are all examples of eager learners. Eager learners, when given a
set of training tuples, will construct a generalization (i.e., classification) model before receiving new (e.g., test)
tuples to classify. We can think of the learned model as being ready and eager to classify previously unseen
tuples.
Other Classification Methods

 k-nearest neighbor classifier
 case-based reasoning
 Genetic algorithm
 Rough set approach
 Fuzzy set approaches
1) k-Nearest-Neighbor Classifiers
The k-nearest-neighbor method was first described in the early 1950s. The method is labor intensive when
given large training sets, and did not gain popularity until the 1960s when increased computing power became
available. It has since been widely used in the area of pattern recognition.
Nearest-neighbor classifiers are based on learning by analogy, that is, by comparing a given test tuple
with training tuples that are similar to it. The training tuples are described by n attributes. Each tuple represents a
point in an n-dimensional space. In this way, all of the training tuples are stored in an n-dimensional pattern
space. When given an unknown tuple, a k-nearest-neighbor classifier searches the pattern space for the k training
tuples that are closest to the unknown tuple. These k training tuples are the k ―nearest neighbors‖ of the unknown
tuple.
―Closeness‖ is defined in terms of a distance metric, such as Euclidean distance. The Euclidean distance
between two points or tuples, say, X1 = (x11, x12, : : : , x1n) and X2 = (x21, x22, : : : , x2n), is
2) Case-Based Reasoning
Case-based reasoning (CBR) classifiers use a database of problem solutions to solve new problems.
Unlike nearest-neighbor classifiers, which store training tuples as points in Euclidean space, CBR stores the
tuples or ―cases‖ for problem solving as complex symbolic descriptions. Business applications of CBR include
problem resolution for customer service help desks, where cases describe product-related diagnostic problems.
CBR has also been applied to areas such as engineering and law, where cases are either technical designs or legal
rulings, respectively. Medical education is another area for CBR, where patient case histories and treatments are
used to help diagnose and treat new patients.
When given a new case to classify, a case-based reasoner will first check if an identical training case
exists. If one is found, then the accompanying solution to that case is returned. If no identical case is found, then
the case-based reasoner will search for training cases having components that are similar to those of the new
case. Conceptually, these training cases may be considered as neighbors of the new case. If cases are represented
as graphs, this involves searching for subgraphs that are similar to subgraphs within the new case. The case-
based reasoner tries to combine the solutions of the neighboring training cases in order to propose a solution for
the new case. If incompatibilities arise with the individual solutions, then backtracking to search for other
solutions may be necessary. The case-based reasoner may employ background knowledge and problem-solving
strategies in order to propose a feasible combined solution.
Instance-Based Methods
 Instance-based learning:
o Store training examples and delay the processing (“lazy evaluation”) until a new instance
must be classified
 Typical approaches
o k-nearest neighbor approach
 Instances represented as points in a Euclidean space.
o Locally weighted regression
 Constructs local approximation
o Case-based reasoning
 Uses symbolic representations and knowledge-based inference
Remarks on Lazy vs. Eager Learning

 Instance-based learning: lazy evaluation
 Decision-tree and Bayesian classification: eager evaluation
 Key differences
o Lazy method may consider query instance xq when deciding how to generalize beyond the
training data D
o Eager method cannot since they have already chosen global approximation when seeing the
query
 Efficiency: Lazy - less time training but more time predicting
 Accuracy
o Lazy method effectively uses a richer hypothesis space since it uses many local linear functions
to form its implicit global approximation to the target function
o Eager: must commit to a single hypothesis that covers the entire instance space
What Is Prediction?
 Prediction is similar to classification
o First, construct a model
o Second, use model to predict unknown value
 Major method for prediction is regression
 Linear and multiple regression
 Non-linear regression
 Prediction is different from classification
o Classification refers to predict categorical class label
o Prediction models continuous-valued functions
 Predictive modeling: Predict data values or construct generalized linear models based on the database
data.
 One can only predict value ranges or category distributions
 Method outline:
 Minimal generalization
 Attribute relevance analysis
 Generalized linear model construction
 Prediction
 Determine the major factors which influence the prediction
o Data relevance analysis: uncertainty measurement, entropy analysis, expert judgement, etc.
 Multi-level prediction: drill-down and roll-up analysis
Prediction: Categorical Data:
UNIT V
CLUSTERING, APPLICATIONS AND TRENDS IN DATA MINING
What is Cluster Analysis?
 Cluster: a collection of data objects
 Similar to one another within the same cluster
 Dissimilar to the objects in other clusters
 Cluster analysis
 Grouping a set of data objects into clusters
 Clustering is unsupervised classification: no predefined classes
 Typical applications
 As a stand-alone tool to get insight into data distribution
 As a preprocessing step for other algorithms
General Applications of Clustering:
 Pattern Recognition
 Spatial Data Analysis
 create thematic maps in GIS by clustering feature spaces
 detect spatial clusters and explain them in spatial data mining
 Image Processing
 Economic Science (especially market research)
 WWW
 Document classification
 Cluster Weblog data to discover groups of similar access patterns
Examples of Clustering Applications:
 Marketing: Help marketers discover distinct groups in their customer bases, and then use this knowledge
to develop targeted marketing programs
 Land use: Identification of areas of similar land use in an earth observation database
 Insurance: Identifying groups of motor insurance policy holders with a high average claim cost
 City-planning: Identifying groups of houses according to their house type, value, and geographical
location
 Earth-quake studies: Observed earth quake epicenters should be clustered along continent faults
What Is Good Clustering?
 A good clustering method will produce high quality clusters with
 high intra-class similarity
 low inter-class similarity
 The quality of a clustering result depends on both the similarity measure used by the method and its
implementation.
 The quality of a clustering method is also measured by its ability to discover some or all of the hidden
patterns.
Requirements of Clustering in Data Mining:
 Scalability
 Ability to deal with different types of attributes
 Discovery of clusters with arbitrary shape
 Minimal requirements for domain knowledge to determine input parameters
 Able to deal with noise and outliers
 Insensitive to order of input records
 High dimensionality
 Incorporation of user-specified constraints
 Interpretability and usability
What is Cluster Analysis?
The process of grouping a set of physical or abstract objects into classes of similar objects is called
clustering. A cluster is a collection of data objects that are similar to one another within the same cluster
and are dissimilar to the objects in other clusters. A cluster of data objects can be treated collectively as
one group and so may be considered as a form of data compression. Although classification is an
effective means for distinguishing groups or classes of objects, it requires the often costly collection and
labeling of a large set of training tuples or patterns, which the classifier uses to model each group. It is
often more desirable to proceed in the reverse direction: First partition the set of data into groups based on
data similarity (e.g., using clustering), and then assign labels to the relatively small number of groups.
Additional advantages of such a clustering-based process are that it is adaptable to changes and helps
single out useful features that distinguish different groups.
Clustering is a challenging field of research in which its potential applications pose their own special
requirements. The following are typical requirements of clustering in data mining: Scalability: Many
clustering algorithms work well on small data sets containing fewer than several hundred data objects;
however, a large database may contain millions of objects. Clustering on a sample of a given large data
set may lead to biased results. Highly scalable clustering algorithms are needed.
Ability to deal with different types of attributes: Many algorithms are designed to cluster interval-based
(numerical) data. However, applications may require clustering other types of data, such as binary,
categorical (nominal), and ordinal data, or mixtures of these data types.
Discovery of clusters with arbitrary shape: Many clustering algorithms determine clusters based on
Euclidean or Manhattan distance measures. Algorithms based on such distance measures tend to find
spherical clusters with similar size and density. However, a cluster could be of any shape. It is important
to develop algorithms that can detect clusters of arbitrary shape. Minimal requirements for domain
knowledge to determine input parameters: Many clustering algorithms require users to input certain
parameters in cluster analysis (such as the number of desired clusters). The clustering results can be quite
sensitive to input parameters. Parameters are often difficult to determine, especially for data sets
containing high-dimensional objects. This not only burdens users, but it also makes the quality of
clustering difficult to control.
Ability to deal with noisy data: Most real-world databases contain outliers or missing, unknown, or
erroneous data. Some clustering algorithms are sensitive to such data and may lead to clusters of poor
quality. Incremental clustering and insensitivity to the order of input records: Some clustering algorithms
cannot incorporate newly inserted data (i.e., database updates) into existing clustering structures and,
instead, must determine a new clustering from scratch. Some clustering algorithms are sensitive to the
order of input data. That is, given a set of data objects, such an algorithm may return dramatically
different clustering’s depending on the order of presentation of the input objects. It is important to
develop incremental clustering algorithms and algorithms that are insensitive to the order of input.
High dimensionality: A database or a data warehouse can contain several dimensions or attributes. Many
clustering algorithms are good at handling low-dimensional data, involving only two to three dimensions.
Human eyes are good at judging the quality of clustering for up to three dimensions. Finding clusters of
data objects in high dimensional space is challenging, especially considering that such data can be sparse
and highly skewed. Constraint-based clustering: Real-world applications may need to perform clustering
under various kinds of constraints. Suppose that your job is to choose the locations for a given number of
new automatic banking machines (ATMs) in a city. To decide upon this, you may cluster households
while considering constraints such as the city’s rivers and highway networks, and the type and number of
customers per cluster. A challenging task is to find groups of data with good clustering behavior that
satisfy specified constraints.
Interpretability and usability: Users expect clustering results to be interpretable, comprehensible, and
usable. That is, clustering may need to be tied to specific semantic interpretations and applications. It is
important to study how an application goal may influence the selection of clustering features and
methods.
Type of data in clustering analysis: x ... x ... x 

 11 1f 1p 
Data Structures:  ... ... ... ... ... 
x ... x ... x 
 Data matrix  i1 if ip 
 ... ... ... ... ... 
 (two modes)  
 xn1 ... x
nf
... x 
np 
 Dissimilarity matrix  0 
d(2,1) 0 
 (one mode)  
d(3,1) d (3,2) 0 
 
 : : : 
d (n,1) d (n,2) ... ... 0
Measure the Quality of Clustering:
 Dissimilarity/Similarity metric: Similarity is expressed in terms of a distance function, which is typically

metric: d(i, j)
 There is a separate “quality” function that measures the “goodness” of a cluster.
 The definitions of distance functions are usually very different for interval-scaled, boolean, categorical,
ordinal and ratio variables.
 Weights should be associated with different variables based on applications and data semantics.
 It is hard to define “similar enough” or “good enough”
 The answer is typically highly subjective.
Type of data in clustering analysis:
 Interval-scaled variables:
 Binary variables:
 Nominal, ordinal, and ratio variables:
 Variables of mixed types:
Interval-valued variables:
 Standardize data
 Calculate the mean absolute deviation:
sf  1
n (| x1 f  m f |  | x2 f  m f | ... | xnf  m f |)
Where
mf  1
n (x1 f  x2 f  ...  xnf )
.
 Calculate the standardized measurement (z-score)

xif  m f
zif  sf
 Using mean absolute deviation is more robust than using standard deviation
Similarity and Dissimilarity between Objects:
 Distances are normally used to measure the similarity or dissimilarity between two data objects
 Some popular ones include: Minkowski distance:
d (i, j)  q (| x  x |q  | x  x |q ... | x  x |q )
i1 j1 i2 j2 ip jp
where i = (xi1, xi2, …, xip) and j = (xj1, xj2, …, xjp) are two p-dimensional data objects, and q is a positive integer
 If q = 1, d is Manhattan distance
d (i, j) | x  x |  | x  x | ... | x  x |
i1 j1 i2 j2 ip jp
 If q = 2, d is Euclidean distance:
d (i, j)  (| x  x |2  | x  x |2 ... | x  x |2 )
i1 j1 i2 j2 ip jp
 Properties
 d(i,j)  0
 d(i,i) = 0
 d(i,j) = d(j,i)
 d(i,j)  d(i,k) + d(k,j)
 Also one can use weighted distance, parametric Pearson product moment correlation, or other
dissimilarity measures.
Nominal Variables:
 A generalization of the binary variable in that it can take more than 2 states, e.g., red, yellow, blue, green
 Method 1: Simple matching
 m: # of matches, p: total # of variables d (i, j)  p 

p
m
 Method 2: use a large number of binary variables
 creating a new binary variable for each of the M nominal states
Ordinal Variables:
 An ordinal variable can be discrete or continuous
 order is important, e.g., rank
 Can be treated like interval-scaled
 replacing xif by their rank

rif {1,...,M f }
 map the range of each variable onto [0, 1] by replacing i-th object in the f-th variable by
rif 1
zif 
M f 1
 compute the dissimilarity using methods for interval-scaled variables
Major Clustering Approaches:
 Partitioning algorithms: Construct various partitions and then evaluate them by some criterion
 Hierarchy algorithms: Create a hierarchical decomposition of the set of data (or objects) using some
criterion
 Density-based: based on connectivity and density functions
 Grid-based: based on a multiple-level granularity structure
 Model-based: A model is hypothesized for each of the clusters and the idea is to find the best fit of that
model to each other.
A Categorization of Major Clustering Methods:
 Partitioning approach:
 Construct various partitions and then evaluate them by some criterion, e.g., minimizing the sum
of square errors
 Typical methods: k-means, k-medoids, CLARANS
 Hierarchical approach:
 Create a hierarchical decomposition of the set of data (or objects) using some criterion
 Typical methods: Diana, Agnes, BIRCH, ROCK, CHAMELEON
 Density-based approach:
 Based on connectivity and density functions
 Typical methods: DBSCAN, OPTICS, DenClue
 Grid-based approach:
 based on a multiple-level granularity structure
 Typical methods: STING, WaveCluster, CLIQUE
 Model-based:
 A model is hypothesized for each of the clusters and tries to find the best fit of that model to
each other
 Typical methods: EM, SOM, COBWEB
 Frequent pattern-based:
 Based on the analysis of frequent patterns
 Typical methods: pCluster
 User-guided or constraint-based:
 Clustering by considering user-specified or application-specific constraints
 Typical methods: COD (obstacles), constrained clustering
Typical Alternatives to Calculate the Distance between Clusters:
 Single link: smallest distance between an element in one cluster and an element in the other, i.e., dis(K i,
Kj) = min(tip, tjq)
 Complete link: largest distance between an element in one cluster and an element in the other, i.e.,
dis(Ki, Kj) = max(tip, tjq)
 Average: avg distance between an element in one cluster and an element in the other, i.e., dis(K i, Kj) =
avg(tip, tjq)
 Centroid: distance between the centroids of two clusters, i.e., dis(Ki, Kj) = dis(Ci, Cj)
 Medoid: distance between the medoids of two clusters, i.e., dis(Ki, Kj) = dis(Mi, Mj)
 Medoid: one chosen, centrally located object in the cluster
Centroid, Radius and Diameter of a Cluster (for numerical data sets):
 Centroid: the “middle” of a cluster
iN 1(t
Cm  ip )
N
 Radius: square root of average distance from any point of the cluster to its centroid
 N (t  cm ) 2
Rm  i 1 ip
N
 Diameter: square root of average mean squared distance between all pairs of points in the cluster
 N  N (t  t ) 2
Dm  i 1 i 1 ip iq
N ( N 1)
Partitioning Methods:
 Partitioning method: Construct a partition of a database D of n objects into a set of k clusters, s.t., some
objective is minimized. E.g., min sum of squared distance in k-means
km1tmiKm (Cm  tmi )2

 Given a k, find a partition of k clusters that optimizes the chosen partitioning criterion
 Global optimal: exhaustively enumerate all partitions
 Heuristic methods: k-means and k-medoids algorithms
 k-means (MacQueen’67): Each cluster is represented by the center of the cluster
 k-medoids or PAM (Partition around medoids) (Kaufman & Rousseeuw’87): Each cluster is
represented by one of the objects in the cluster
The K-Means Clustering Method:
 Given k, the k-means algorithm is implemented in four steps:
 Partition objects into k nonempty subsets
 Compute seed points as the centroids of the clusters of the current partition (the centroid is the
center, i.e., mean point, of the cluster)
 Assign each object to the cluster with the nearest seed point
 Go back to Step 2, stop when no more new assignment
The K-Means Clustering Method:
Comments on the K-Means Method:
 Strength: Relatively efficient: O(tkn), where n is # objects, k is # clusters, and t is # iterations.

Normally, k, t << n.
 Comparing: PAM: O(k(n-k)2 ), CLARA: O(ks2 + k(n-k))
 Comment: Often terminates at a local optimum. The global optimum may be found using techniques
such as: deterministic annealing and genetic algorithms
 Weakness
 Applicable only when mean is defined, then what about categorical data?
 Need to specify k, the number of clusters, in advance
 Unable to handle noisy data and outliers
 Not suitable to discover clusters with non-convex shapes
Variations of the K-Means Method:
 A few variants of the k-means which differ in
 Selection of the initial k means
 Dissimilarity calculations
 Strategies to calculate cluster means
 Handling categorical data: k-modes (Huang’98)
 Replacing means of clusters with modes
 Using new dissimilarity measures to deal with categorical objects
 Using a frequency-based method to update modes of clusters
 A mixture of categorical and numerical data: k-prototype method
What Is the Problem of the K-Means Method?:
 The k-means algorithm is sensitive to outliers !
 Since an object with an extremely large value may substantially distort the distribution of the
data.
 K-Medoids: Instead of taking the mean value of the object in a cluster as a reference point, medoids can
be used, which is the most centrally located object in a cluster.
The K-Medoids Clustering Method:
 Find representative objects, called medoids, in clusters
 PAM (Partitioning Around Medoids, 1987)
 starts from an initial set of medoids and iteratively replaces one of the medoids by one of
the non-medoids if it improves the total distance of the resulting clustering
 PAM works effectively for small data sets, but does not scale well for large data sets
 CLARA (Kaufmann & Rousseeuw, 1990)
 CLARANS (Ng & Han, 1994): Randomized sampling
 Focusing + spatial data structure (Ester et al., 1995)
A Typical K-Medoids Algorithm (PAM):
What Is the Problem with PAM?
 PAM is more robust than k-means in the presence of noise and outliers because a medoid is less
influenced by outliers or other extreme values than a mean
 Pam works efficiently for small data sets but does not scale well for large data sets.
 O(k(n-k)2 ) for each iteration
where n is # of data, k is # of clusters
 Sampling based method,
CLARA(Clustering LARge Applications)
CLARA (Clustering Large Applications) (1990):
 CLARA (Kaufmann and Rousseeuw in 1990)
 Built in statistical analysis packages, such as S+
 It draws multiple samples of the data set, applies PAM on each sample, and gives the best
clustering as the output
 Strength: deals with larger data sets than PAM
 Weakness:
 Efficiency depends on the sample size
 A good clustering based on samples will not necessarily represent a good clustering of the
whole data set if the sample is biased
CLARANS (“Randomized” CLARA) (1994):
 CLARANS (A Clustering Algorithm based on Randomized Search) (Ng and Han’94)
 CLARANS draws sample of neighbors dynamically
 The clustering process can be presented as searching a graph where every node is a potential
solution, that is, a set of k medoids
 If the local optimum is found, CLARANS starts with new randomly selected node in search for a
new local optimum
 It is more efficient and scalable than both PAM and CLARA
 Focusing techniques and spatial access structures may further improve its performance (Ester et
al.’95)
Hierarchical Clustering:
 Use distance matrix. This method does not require the number of clusters k as an input, but needs
a termination condition
AGNES (Agglomerative Nesting):
 Introduced in Kaufmann and Rousseeuw (1990)
 Implemented in statistical analysis packages, e.g., Splus
 Use the Single-Link method and the dissimilarity matrix.
 Merge nodes that have the least dissimilarity
 Go on in a non-descending fashion
 Eventually all nodes belong to the same cluster
Dendrogram: Shows How the Clusters are Merged :
Decompose data objects into a several levels of nested partitioning (tree of clusters), called a dendrogram.
A clustering of the data objects is obtained by cutting the dendrogram at the desired level, then each
connected component forms a cluster.
DIANA (Divisive Analysis):
 Introduced in Kaufmann and Rousseeuw (1990)
 Implemented in statistical analysis packages, e.g., Splus
 Inverse order of AGNES
 Eventually each node forms a cluster on its own
Recent Hierarchical Clustering Methods:
 Major weakness of agglomerative clustering methods
 do not scale well: time complexity of at least O(n2), where n is the number of total objects
 can never undo what was done previously
 Integration of hierarchical with distance-based clustering
 BIRCH (1996): uses CF-tree and incrementally adjusts the quality of sub-clusters
 ROCK (1999): clustering categorical data by neighbor and link analysis
 CHAMELEON (1999): hierarchical clustering using dynamic modeling
BIRCH (1996):
 Birch: Balanced Iterative Reducing and Clustering using Hierarchies (Zhang, Ramakrishnan &
Livny, SIGMOD’96)
 Incrementally construct a CF (Clustering Feature) tree, a hierarchical data structure for

multiphase clustering
 Phase 1: scan DB to build an initial in-memory CF tree (a multi-level compression of the

data that tries to preserve the inherent clustering structure of the data)
 Phase 2: use an arbitrary clustering algorithm to cluster the leaf nodes of the CF-tree
 Scales linearly: finds a good clustering with a single scan and improves the quality with a few
additional scans
 Weakness: handles only numeric data, and sensitive to the order of the data record.
Clustering Feature Vector in BIRCH :
Clustering Feature: CF = (N, LS, SS)
N: Number of data points
LS (linear sum): Ni=1 Xi
SS (square sum): Ni=1 Xi2
CF-Tree in BIRCH:
 Clustering feature:
 summary of the statistics for a given subcluster: the 0-th, 1st and 2nd moments of the
subcluster from the statistical point of view.
 registers crucial measurements for computing cluster and utilizes storage efficiently
A CF tree is a height-balanced tree that stores the clustering features for a hierarchical clustering
 A nonleaf node in a tree has descendants or “children”
 The nonleaf nodes store sums of the CFs of their children
 A CF tree has two parameters
 Branching factor: specify the maximum number of children.
 threshold: max diameter of sub-clusters stored at the leaf nodes
 If memory not enough, rebuild the tree from leaf node by adjusting threshold
Clustering Categorical Data: The ROCK Algorithm:
 ROCK: RObust Clustering using linKs
 S. Guha, R. Rastogi & K. Shim, ICDE’99
 Major ideas
 Use links to measure similarity/proximity
 Not distance-based
 Computational complexity:
 Algorithm: sampling-based clustering
 Draw random sample
 Cluster with links
 Label data in disk
 Experiments
 Congressional voting, mushroom data
Similarity Measure in ROCK:
 Traditional measures for categorical data may not work well, e.g., Jaccard coefficient
 Example: Two groups (clusters) of transactions
 C1. <a, b, c, d, e>: {a, b, c}, {a, b, d}, {a, b, e}, {a, c, d}, {a, c, e}, {a, d, e}, {b, c, d}, {b,
c, e}, {b, d, e}, {c, d, e}
 C2. <a, b, f, g>: {a, b, f}, {a, b, g}, {a, f, g}, {b, f, g}
 Jaccard co-efficient may lead to wrong clustering result

T1  T2
 C1: 0.2 ({a, b, c}, {b, d, e}} to 0.5 ({a, b, c}, {a, b, d})
Sim(T1 , T2 ) 
T1  T2
 C1 & C2: could be as high as 0.5 ({a, b, c}, {a, b, f})
 Jaccard co-efficient-based similarity function:
 Ex. Let T1 = {a, b, c}, T2 = {c, d, e}
{c} 1
Sim(T 1, T 2)    0.2
{a, b, c, d , e} 5
Link Measure in ROCK:
 Links: # of common neighbors
 C1 <a, b, c, d, e>: {a, b, c}, {a, b, d}, {a, b, e}, {a, c, d}, {a, c, e}, {a, d, e}, {b, c, d}, {b,
c, e}, {b, d, e}, {c, d, e}
 C2 <a, b, f, g>: {a, b, f}, {a, b, g}, {a, f, g}, {b, f, g}
 Let T1 = {a, b, c}, T2 = {c, d, e}, T3 = {a, b, f}
 link(T1, T2) = 4, since they have 4 common neighbors
 {a, c, d}, {a, c, e}, {b, c, d}, {b, c, e}
 link(T1, T3) = 3, since they have 3 common neighbors
 {a, b, d}, {a, b, e}, {a, b, g}
 Thus link is a better measure than Jaccard coefficient
CHAMELEON: Hierarchical Clustering Using Dynamic Modeling (1999):
 CHAMELEON: by G. Karypis, E.H. Han, and V. Kumar’99
 Measures the similarity based on a dynamic model
 Two clusters are merged only if the interconnectivity and closeness (proximity) between
two clusters are high relative to the internal interconnectivity of the clusters and
closeness of items within the clusters
 Cure ignores information about interconnectivity of the objects, Rock ignores

information about the closeness of two clusters
 A two-phase algorithm
 Use a graph partitioning algorithm: cluster objects into a large number of relatively small
sub-clusters
 Use an agglomerative hierarchical clustering algorithm: find the genuine clusters by

repeatedly combining these sub-clusters
Overall Framework of CHAMELEON:
Density-Based Clustering Methods:
 Clustering based on density (local cluster criterion), such as density-connected points
 Major features:
 Discover clusters of arbitrary shape
 Handle noise
 One scan
 Need density parameters as termination condition
 Several interesting studies:
 DBSCAN: Ester, et al. (KDD’96)
 OPTICS: Ankerst, et al (SIGMOD’99).
 DENCLUE: Hinneburg & D. Keim (KDD’98)
 CLIQUE: Agrawal, et al. (SIGMOD’98) (more grid-based)
DBSCAN: The Algorithm:
 Arbitrary select a point p
 Retrieve all points density-reachable from p w.r.t. Eps and MinPts.
 If p is a core point, a cluster is formed.
 If p is a border point, no points are density-reachable from p and DBSCAN visits the next point
of the database.
 Continue the process until all of the points have been processed.
Grid-Based Clustering Method:
 Using multi-resolution grid data structure
 Several interesting methods
 STING (a STatistical INformation Grid approach) by Wang, Yang and Muntz (1997)
 WaveCluster by Sheikholeslami, Chatterjee, and Zhang (VLDB’98)
 A multi-resolution clustering approach using wavelet method
 CLIQUE: Agrawal, et al. (SIGMOD’98)
 On high-dimensional data (thus put in the section of clustering high-dimensional

data
STING: A Statistical Information Grid Approach:
 Wang, Yang and Muntz (VLDB’97)
 The spatial area area is divided into rectangular cells
 There are several levels of cells corresponding to different levels of resolution
The STING Clustering Method:
 Each cell at a high level is partitioned into a number of smaller cells in the next lower
level
 Statistical info of each cell is calculated and stored beforehand and is used to answer
queries
 Parameters of higher level cells can be easily calculated from parameters of lower level
cell
 count, mean, s, min, max
 type of distribution—normal, uniform, etc.
 Use a top-down approach to answer spatial data queries
 Start from a pre-selected layer—typically with a small number of cells
 For each cell in the current level compute the confidence interval
Comments on STING:
 Remove the irrelevant cells from further consideration
 When finish examining the current layer, proceed to the next lower level
 Repeat this process until the bottom layer is reached
 Advantages:
 Query-independent, easy to parallelize, incremental update
 O(K), where K is the number of grid cells at the lowest level
 Disadvantages:
 All the cluster boundaries are either horizontal or vertical, and no diagonal boundary is
detected
Model-Based Clustering?:
 What is model-based clustering?
 Attempt to optimize the fit between the given data and some mathematical model
 Based on the assumption: Data are generated by a mixture of underlying probability

distribution
 Typical methods
 Statistical approach
 EM (Expectation maximization), AutoClass
 Machine learning approach
 COBWEB, CLASSIT
 Neural network approach
 SOM (Self-Organizing Feature Map)
Conceptual Clustering:
 Conceptual clustering
 A form of clustering in machine learning
 Produces a classification scheme for a set of unlabeled objects
 Finds characteristic description for each concept (class)
 COBWEB (Fisher’87)
 A popular a simple method of incremental conceptual learning
 Creates a hierarchical clustering in the form of a classification tree
 Each node refers to a concept and contains a probabilistic description of that concept
Neural Network Approach:
 Neural network approaches
 Represent each cluster as an exemplar, acting as a “prototype” of the cluster
 New objects are distributed to the cluster whose exemplar is the most similar according to
some distance measure
 Typical methods
 SOM (Soft-Organizing feature Map)
 Competitive learning
 Involves a hierarchical architecture of several units (neurons)
 Neurons compete in a “winner-takes-all” fashion for the object currently being

presented
CLIQUE: The Major Steps:
 Partition the data space and find the number of points that lie inside each cell of the partition.
 Identify the subspaces that contain clusters using the Apriori principle
 Identify clusters
 Determine dense units in all subspaces of interests
 Determine connected dense units in all subspaces of interests.
 Generate minimal description for the clusters
 Determine maximal regions that cover a cluster of connected dense units for each cluster
 Determination of minimal cover for each cluster
Frequent Pattern-Based Approach:
 Clustering high-dimensional space (e.g., clustering text documents, microarray data)
 Projected subspace-clustering: which dimensions to be projected on?
 CLIQUE, ProClus
 Feature extraction: costly and may not be effective?
 Using frequent patterns as “features”
 “Frequent” are inherent features
 Mining freq. patterns may not be so expensive
 Typical methods
 Frequent-term-based document clustering
 Clustering by pattern similarity in micro-array data (pClustering)
Why Constraint-Based Cluster Analysis?:
 Need user feedback: Users know their applications the best
 Less parameters but more user-desired constraints, e.g., an ATM allocation problem: obstacle &
desired clusters
A Classification of Constraints in Cluster Analysis:
 Clustering in applications: desirable to have user-guided (i.e., constrained) cluster analysis
 Different constraints in cluster analysis:
 Constraints on individual objects (do selection first)
 Cluster on houses worth over $300K
 Constraints on distance or similarity functions
 Weighted functions, obstacles (e.g., rivers, lakes)
 Constraints on the selection of clustering parameters
 # of clusters, MinPts, etc.
 User-specified constraints
 Contain at least 500 valued customers and 5000 ordinary ones
 Semi-supervised: giving small training sets as “constraints” or hints
Clustering with User-Specified Constraints:
 Example: Locating k delivery centers, each serving at least m valued customers and n ordinary
ones
 Proposed approach
 Find an initial “solution” by partitioning the data set into k groups and satisfying user-
constraints
 Iteratively refine the solution by micro-clustering relocation (e.g., moving δ μ-clusters

from cluster Ci to Cj) and “deadlock” handling (break the microclusters when necessary)
 Efficiency is improved by micro-clustering
 How to handle more complicated constraints?
 E.g., having approximately same number of valued customers in each cluster?! — Can
you solve it?
What Is Outlier Discovery?:
 What are outliers?
 The set of objects are considerably dissimilar from the remainder of the data
 Example: Sports: Michael Jordon, Wayne Gretzky, ...
 Problem: Define and find outliers in large data sets
 Applications:
 Credit card fraud detection
 Telecom fraud detection
 Customer segmentation
 Medical analysis
Outlier Discovery: Statistical Approaches
 Assume a model underlying distribution that generates data set (e.g. normal distribution)
 Use discordancy tests depending on
 data distribution
 distribution parameter (e.g., mean, variance)
 number of expected outliers
 Drawbacks
 most tests are for single attribute
 In many cases, data distribution may not be known
Outlier Discovery: Distance-Based Approach:
 Introduced to counter the main limitations imposed by statistical methods
 We need multi-dimensional analysis without knowing data distribution
 Distance-based outlier: A DB(p, D)-outlier is an object O in a dataset T such that at least a

fraction p of the objects in T lies at a distance greater than D from O
 Algorithms for mining distance-based outliers
 Index-based algorithm
 Nested-loop algorithm
 Cell-based algorithm
Density-Based Local Outlier Detection:
 Distance-based outlier detection is based on global distance distribution
 It encounters difficulties to identify outliers if data is not uniformly distributed
 Ex. C1 contains 400 loosely distributed points, C2 has 100 tightly condensed points, 2 outlier
points o1, o2
 Distance-based method cannot identify o2 as an outlier
 Need the concept of local outlier
Outlier Discovery: Deviation-Based Approach:
 Identifies outliers by examining the main characteristics of objects in a group
 Objects that “deviate” from this description are considered outliers
 Sequential exception technique
 simulates the way in which humans can distinguish unusual objects from among a series
of supposedly like objects
 OLAP data cube technique
 uses data cubes to identify regions of anomalies in large multidimensional data
Summary:
 Cluster analysis groups objects based on their similarity and has wide applications
 Measure of similarity can be computed for various types of data
 Clustering algorithms can be categorized into partitioning methods, hierarchical methods,

density-based methods, grid-based methods, and model-based methods
 Outlier detection and analysis are very useful for fraud detection, etc. and can be performed by
statistical, distance-based or deviation-based approaches
 There are still lots of research issues on cluster analysis
Problems and Challenges:
 Considerable progress has been made in scalable clustering methods
 Partitioning: k-means, k-medoids, CLARANS
 Hierarchical: BIRCH, ROCK, CHAMELEON
 Density-based: DBSCAN, OPTICS, DenClue
 Grid-based: STING, WaveCluster, CLIQUE
 Model-based: EM, Cobweb, SOM
 Frequent pattern-based: pCluster
 Constraint-based: COD, constrained-clustering
 Current clustering techniques do not address all the requirements adequately, still an active area
of research

Introduction To Data Warehouse: Unit I: Data Warehousing

Uploaded by

Copyright:

Available Formats

Introduction To Data Warehouse: Unit I: Data Warehousing

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Introduction To Data Warehouse: Unit I: Data Warehousing

Uploaded by

Copyright:

Available Formats

www.Vidyarthiplus.

UNIT I: DATA WAREHOUSING

Info about data stores

7 Information delivery system

Building a Data warehouse:

Mapping the Data Warehouse to a Multiprocessor Architecture

Parallel DBMS features

DBMS schemas for decision support

Meta Data Interchange Initiative:

• Standard Meta Data Model:

Meta Data Integration Points

Meta data management:

4. Logic Works Universal Directory

Reporting Query tools and Applications

General Ledger System Data:

Impromptu's main features includes,

Interactive reporting capability

Online Analytical Processing (OLAP), OLAP Need, Multidimensional Data Model:

The Multidimensional data Model

Operations in Multidimensional Data Model:

CATEGORIES OF OLAP TOOLS

Examples: Hyperion Essbase, Fusion (Information Builders)

Examples: Microstrategy Intelligence Server, MetaCube (Informix/IBM)

HOLAP (MQE: Managed Query Environment)

In addition to these guidelines an OLAP system should also support:

OLTP System OLAP System

Typically de-normalized with fewer

Multidimensional versus Multi relational OLAP, Categories of Tools

Mrs. R.Sudha M.Tech.,(Ph.D)

 ROLAP is the fastest-growing type of OLAP tools.

OLAP Tools and the Internet

Categorization of OLAP Tools

OLAP Tools and the internet:

Products for OLAP

The evolution of database technology

What is data mining?

Essential step in the process of knowledge discovery in databases

 data cleaning: to remove noise or irrelevant data

Architecture of a typical data mining system/Major Components

Data mining: on what kind of data?

SELECT count(*) FROM Items WHERE type=video GROUP BY category.

Advanced database systems and advanced database applications

• An objected-oriented database is designed based on the object-oriented programming paradigm where

1 Concept/class description: characterization and discrimination

3. both data characterization and discrimination

It is a summarization of the general characteristics or features of a target class of data.

Discrimination descriptions expressed in rule form are referred to as discriminant rules.

major(X, “computing science””) ⇒owns(X, “personal computer”)

[support = 12%, confidence = 98%]

3 Classification and prediction

 It predicts categorical class labels

A classification model can be represented in various forms, such as

student ( class , "undergraduate") AND concentration ( level, "high") ==> class A

student (class ,"undergraduate") AND concentrtion (level,"low") ==> class B

student (class , "post graduate") ==> class C

Classification vs. Prediction

Clustering analyzes data objects without consulting a known class label.

Each cluster that is formed can be viewed as a class of objects.