Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 120 views

    Products Heat Transfer Fluids Marlotherm

    Uploaded by

    Evans Azka F
    Marlotherm SH is a clear liquid heat transfer fluid with a density of 1.04-1.05 g/ml and viscosity of 42-52 mm2/s at 20°C. It has a boiling range of approximately 385-395°C, flash point of around 200°C, and pour point below -34°C, making it suitable for use up to temperatures of 350°C for heaters and 380°C for films.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Products Heat Transfer Fluids Marlotherm

    Uploaded by

    Evans Azka F
    120 views1 page
    Marlotherm SH is a clear liquid heat transfer fluid with a density of 1.04-1.05 g/ml and viscosity of 42-52 mm2/s at 20°C. It has a boiling range of approximately 385-395°C, flash point of around 200°C, and pour point below -34°C, making it suitable for use up to temperatures of 350°C for heaters and 380°C for films.

    Original Description:

    Products Heat Transfer Fluids Marlotherm

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Marlotherm SH is a clear liquid heat transfer fluid with a density of 1.04-1.05 g/ml and viscosity of 42-52 mm2/s at 20°C. It has a boiling range of approximately 385-395°C, flash point of around 200°C, and pour point below -34°C, making it suitable for use up to temperatures of 350°C for heaters and 380°C for films.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    120 views1 page

    Products Heat Transfer Fluids Marlotherm

    Uploaded by

    Evans Azka F
    Marlotherm SH is a clear liquid heat transfer fluid with a density of 1.04-1.05 g/ml and viscosity of 42-52 mm2/s at 20°C. It has a boiling range of approximately 385-395°C, flash point of around 200°C, and pour point below -34°C, making it suitable for use up to temperatures of 350°C for heaters and 380°C for films.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Marlotherm® SH

    Heat Transfer Fluid

    Typical Properties

    Appearance Clear Liquid

    Chlorine (ppm) <10

    Acid Number (mg KOH/g) ≤0.02

    Density at 20°C (g/ml) 1.04-1.05

    Viscosity at 20°C mm²/s 42-52

    Boiling Range °C (°F) App. 385-395 (725-743)

    Pour Point °C (°F) <-34 (-29)

    Flash Point °C (°F) App. 200 (392)

    Ignition Temperature °C (°F) App. 500 (932)

    Permissible Heater Outlet Temp. °C (°F) 350 (662)

    Permissible Heater Film Temp. °C (°F) 380 (716)

    Pumpability Limit °C (°F) -5 (23)

    You might also like