Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
157 views

BSC Commands

This document contains 68 commands related to operating and monitoring an EAW EBS cellular network. Some key commands include: 1. rlcrp:cell=all; - To know the status of all cells in the BSC. 2. rlcfp:cell=all; - To know the allocation frequencies for all cells. 3. rlnrp:cell=all; - To know the external and internal neighbors for all cells. 4. rxmfp:moty=rxotg,faulty; - To get all alarms for sites in the BSC. 5. rldep:cell=all - To get the CGI, BCCH, and BSIC information for all cells

Uploaded by

fashiondsnn
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
157 views

BSC Commands

This document contains 68 commands related to operating and monitoring an EAW EBS cellular network. Some key commands include: 1. rlcrp:cell=all; - To know the status of all cells in the BSC. 2. rlcfp:cell=all; - To know the allocation frequencies for all cells. 3. rlnrp:cell=all; - To know the external and internal neighbors for all cells. 4. rxmfp:moty=rxotg,faulty; - To get all alarms for sites in the BSC. 5. rldep:cell=all - To get the CGI, BCCH, and BSIC information for all cells

Uploaded by

fashiondsnn
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

# OSS Commands

21/Jun/2011

EAW EBS<BSC no>SH


1 rlcrp:cell=all; to know
all cell including in the BSC if =1 mean ON
if=0 mean OFF

2 rlcrp:cell=cell name;
to know all properties of any cell we want

3 rlcfp:cell=all; to know
allocation frequencies

4 rldep:cell=all to know
all cells information

5 rllhp:cell=all; to know
HCS for cells

6 rllhc:cell=cell name,layer=value,layerthr=value;
to change HCS threshold for a cell

7 rlnrp:cell=cell name,cellr=all;
to know all neighbors for a cell inside the same BSC
8 rlnrp:cell=cell name,cellr=all;
to know all neighbors for a cell in all BSCs

9 rlacp:cell=cell name; to know


adaptive configuration for a cell

10 rlaci:cell=cell name; make ada


ptive configuration ON

11 rlace:cell=cell name; make ada


ptive configuration OFF

12 rlacc:cell=cell name; to chang


e S-level and S-time

13 rlmfp:cell=cell name; to know


BCCH for all neighbors & check handover

14 rlmfc:cell=cell name,mbcchno=value;
to change MBCCH value

15 rxtcp:moty=rxotg,cell=cell name;
to know TG for the site

16 rxmfp:mo=rxocf-TG value
change TG value for site/To view the alarm in the site

17 rxcdp:mo=rxotg-TG value
to check TRX working or not

18 rxmop:mo=rxotg to know
the type of RBS software
19 rxasp:mo=rxotg-TG; value
to know RBS faults

20 rldhp:cell=cell name; to know


HR if ON or OFF

21 rlcfp:cell=cell name; to know


the frequncy for any cell

22 rlcfi:cell=cell name,chgr=1,dchno=freq.add;
to add frequncy

23 rlcfe:cell=cell name,chgr=1,dchno=freq.delete;
delete frequncy

24 rlcrp=cell name; to know


ICMB

25 rlssp:cell=cell name; to know


the value of ACCMIN

26 rlnrp:cell=cell name,cellr=all,nodata;
NEIGHBOUR RELATION DATA
check E1 quality

27 rxtcp:moty=rxotg,cell=cell name;
to find TG of cell

28 rxapp:mo=rxotg-TG; to choos
e rblt2 for the cell

29 radep:dev=rblt2-?; to find
ETM2

30 ntcop:snt=ETM2-?; to find
the range of rblt

31 dtqup:dip=range of rblt;
SLIP should be zero

32 rxelp:mo=rxotg-TG; to check
history alarms for E1 quality

33 dtstp:dip=TGrbl2; to check
the E1 working or not (BSC1)

34 dtstp:dip=TGrb2; to check
the E1 working or not (BSC2,3 and4)

35 Rlstp:cell=cellname; (to chec


k the status of the site halted or active)

36.RLSTC:CELL=cellname,STATE=ACTIVE; This example changes the cell LIN1 to the


state ACTIVE. Any channel groups within the cell are set to the state ACTIVE.
37.RLSTC:CELL=cellname,STATE=HALTED; This example changes the cell LIN1 to the
state HALTED. Any channel groups within the cell are set to the state HALTED.
36 Rxasp:moty=rxotg; To check
the alarms for all sites in the BSC
37 rxmfp:moty=rxotg,faulty;
Commands to get all the alarms in TG

rxmfp:mo=rxocf-414,subord,faulty;
38 rxmfp:moty=rxocf,faulty;
Commands to get all the alarms in CF

39 rxmfp:moty=rxotrx,faulty;
Commands to get all the alarms in TRX

40 rxmfp:moty=rxorx,faulty;
Commands to get all the alarms in RX

41 rxmfp:moty=rxotx,faulty;
Commands to get all the alarms in TX

42 rxmfp:moty=rxots,faulty;
Commands to get all the alarms in TS

43 RXTCP:MOTY=RXOTG; Find TG
for each site

44 RLCPP:CELL=ALL; To know the BSPW


RB BSPWRT MSTXPWR

45 RLLOP:CELL=ALL;

rxmop:mo=rxotx-<TG>-0&&-11;

46 RXMOP:MOTY=RXOTG;

47 RXMOP:MOTY=RXOCF;

48 RXMOP:MOTY=RXOTF;

49 RXMOP:MOTY=RXOTRX; TRX

50 RXMOP:MOTY=RXOTX;

51 RXMOP:MOTY=RXORX;

52 RXAPP:MOTY=RXOTG; TG

53 allip:acl=o1; Alarms check

54 RLDGP:CELL=ALL; To know
the band for the cells

55 RLCRP:CELL=ALL; To know
the TCH no.

56 rlnrp:cell=all; To know all the


External and Internal neighbour for all cells

57 saaep:sae=1153; To know No. of T


RX in BSC

58 rlnrp:cell=nj5071a,cellr=nj5053a;
To know offset value
rxelp:morxotg-tg;

rxmfp:mo=rxocf-tg; RBS type


___________________________________________________________________
get . poweroffset -- offset 3g
lget ubg3717 pwradm -- power admission
get utranCell=xxxxx maximumTransmissionPower or get UBGxxxxx maxi
get . maxtotaloutputpower
lget .3 maxdl -- maxDlPowerCapability
60 RXESI:MO=RXOTG-1,subord; To brings into service the TG1 MO
61 RXESE:MO=RXOTG-1,subord; To take out the TG1 MO from service
62 raclp; .....BSC license check/ must not be morethan 90%/
63 m3asp; .....to check BSC to M3UA connection
64 m3rsp:dest=all;........to check BSC to M3UA connection in detail
65 rrbvp:nsei=all; .......to check the Gb interface configuration of all site with
all the SGSNs in pool.
66 rxmop:mo=rxotx-TG-0&&-11;.....to check the configuration
67 rxmfp:mo=rxocf-tg;.....to check the installed RRU type & its serial no.
68 rldep:cell=all; ......to get the cGI, BCCH and BSIC info

You might also like