Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
1K views

4.sampling Theorem Matlab Program

The document verifies the sampling theorem by generating a cosine waveform with a frequency of 1/4 Hz and sampling it at rates below, at, and above twice the highest frequency. When sampled at 1.6/4 Hz, aliasing occurs as seen by the red plotted samples. When sampled at 2/4 Hz, the samples reconstruct the original signal as predicted by the sampling theorem. When sampled at 8/4 Hz, more samples are taken than needed but still reconstruct the original signal.

Uploaded by

rambabu
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views

4.sampling Theorem Matlab Program

The document verifies the sampling theorem by generating a cosine waveform with a frequency of 1/4 Hz and sampling it at rates below, at, and above twice the highest frequency. When sampled at 1.6/4 Hz, aliasing occurs as seen by the red plotted samples. When sampled at 2/4 Hz, the samples reconstruct the original signal as predicted by the sampling theorem. When sampled at 8/4 Hz, more samples are taken than needed but still reconstruct the original signal.

Uploaded by

rambabu
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SAMPLING THEOREM

AIM: To verify the waveforms of sampling theorem.

APPARATUS

1. Personal computer
2. Matlab2010

PROGRAM

clc;
clear all;
close all;
t=-10:0.01:10;
T=4;
fm=1/T;
x=cos(2*pi*fm*t);
subplot(2,2,1);
plot(t,x);
title('msg signal');
xlabel('time');
ylabel('amplitude');
fs1=1.6*fm;
fs2=2*fm;
fs3=8*fm;
n1=-4:1:4;
x1=cos(2*pi*fm/fs1*n1);
subplot(2,2,2);
stem(n1,x1);
hold on;
subplot(2,2,2);
plot(n1,x1,'r');
title('sampling when fs<2fm');
xlabel('sample');
ylabel('amplitude');
n2=-5:1:5;
x2=cos(2*pi*fm/fs2*n2);
subplot(2,2,3);
stem(n2,x2);
hold on;
subplot(2,2,3);
SAMPLING THEOREM
plot(n2,x2,'r');
title('sampling when fs=2fm');
xlabel('sample');
ylabel('amplitude');
n3=-20:1:20;
x3=cos(2*pi*fm/fs3*n3);
subplot(2,2,4);
stem(n3,x3);
hold on;
subplot(2,2,4);
plot(n3,x3,'r');
title('sampling when fs>2fm');
xlabel('sample');
ylabel('amplitude');

RESULT:

You might also like