486.

5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 8

Cable ladder systems

Cable ladder systems

Metstrut cable ladder systems have been
developed to provide cost effective
solutions for the support of cables in a
wide range of market sectors.
These sectors include: Metstrut is a leading manufacturer of cable
* Commercial ladder for not only the UK market, but also
* Education manufactures for export. European widths of
* Health cable ladder are available in increments of
* Oil and Gas 100mm up to 900mm wide.
* Petrochemical
Rung configurations are traditionally with open
* Power Generation
faces alternately positioned up and down at
* Retail
300mm centres. Cable ladders with rungs
* Telecoms
facing all down or all up are also available to
* Tunnels
order.
The comprehensive Metstrut cable ladder range
Offering comprehensive design solutions and
consists of four systems commencing with the
flexible production through lean manufacturing
50mm deep light duty, up to the150mm deep
principles, and with a very high on-time and in-
extra heavy duty, all with a wide offering of
full delivery performance, Metstrut has earned
accessories.
the reputation for its high level of service.
Slotted side rails whilst allowing easy
Development and testing
connection to each other also allows site cut
Metstrut cable ladder systems have been
ladders to be connected generally without the
developed in house and fully supported by
need to drill. Additionally, Metstrut cable
independent testing in the Department of
ladders have an excellent strength to weight
Mechanical Engineering at the University of
ratio providing a versatile approach to the
Strathclyde.
support of cables.
Further verification testing has also been
For projects requiring long, straight runs of
carried out under the requirements of
cable ladder, Metstrut manufactures to order 6m
BS EN 61537:2007 - cable management -
lengths of straight ladder that speeds up the
cable tray systems and cable ladder systems.
installation process and reduces the number of
These tests include: impact resistance,
splice plates required for an even more cost
marking, connection of re-usable components,
effective solution. This would be particularly
safe working load tests, electrical continuity,
applicable to tunnel projects and large power
and performance of steel at extreme
stations or petrochemical installations.
temperature ranges.

8
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 9

Cable ladder systems

Load tables Ladder table

Safe load tables are LOAD TYPE
provided in a unique
w 50mm deep 100mm deep 125mm deep 150mm deep
format for easy comparison
kg/m s d dp s d dp s d dp s d dp
and cost optimisation.
Load tables assume an 25 3.931 19.7 19.7 6.000 19.6 30.0 6.000 8.7 30.0 6.000 5.4 30.0

even distribution of load 50 3.120 15.6 15.6 5.487 27.4 27.4 6.000 17.3 30.0 6.000 10.9 30.0
across the width of the 75 2.725 13.6 13.6 4.564 19.7 22.8 6.000 26.0 30.0 6.000 16.3 30.0
ladder fixed in a horizontal 100 2.396 10.9 12.0 3.952 14.8 19.8 5.321 21.4 26.6 6.000 21.8 30.0
plane, and that the loading 125 2.143 8.7 10.7 3.535 11.8 17.7 4.760 17.1 23.8 5.476 18.9 27.4
is similar on at least two or
150 1.956 7.2 9.8 3.227 9.8 16.1 4.345 14.3 21.7 4.999 15.7 25.0
more continuous spans.
175 1.811 6.2 9.1 2.988 8.4 14.9 4.023 12.2 20.1 4.628 13.5 23.1
For non-uniform loads or
spans/loadings outside the 200 1.694 5.4 8.5 2.795 7.4 14.0 3.763 10.7 18.8 4.329 11.8 21.6

scope of the tables, please 225 1.597 4.8 8.0 2.635 6.6 13.2 3.548 9.5 17.7 4.081 10.5 20.4
contact Metstrut for advice. 250 1.515 4.3 7.6 2.500 5.9 12.5 3.366 8.6 16.8 3.872 9.4 19.4
275 1.445 3.9 7.2 2.383 5.4 11.9 3.209 7.8 16.0 3.692 8.6 18.5
300 1.383 3.6 6.9 2.282 4.9 11.4 3.072 7.1 15.4 3.535 7.9 17.7

‘s’– maximum spacing of supports in metres

‘d’– maximum deflection in end span in mm
‘dp’– allowable deflection (span/200) in mm
‘w’– safe working load in kg per linear metre

Example:-
Load required = 100kg per linear metre
Options available:-
1. 50mm deep ladder will span up to a maximum of 2.396m with a deflection of 10.9mm
2. 100mm deep ladder will span up to a maximum of 3.952m with a deflection of 14.8mm
3. 125mm deep ladder will span up to a maximum of 5.321m with a deflection of 21.4mm
4. 150mm deep ladder will span up to a maximum of 6.000m with a deflection of 21.8mm

9
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 10

Cable ladder systems

Cable ladder systems

System configuration and support
Metstrut cable ladders are designed
as a complete system with simple
accessories for ease of installation.
Equal tee
Splice plates are supplied complete
with M10 cup square bolts, shake
proof washers, and nuts with a high
tolerance fit for optimum structural
performance. Straight length

When installing Metstrut cable

ladders, care should be taken to Splice plates
ensure the support is within 600mm
of a joint. Accessories (e.g. bends,
tees, crossovers etc.) should have
adequate support with additional
supports for larger components.

Technical construction details

Whilst rungs are alternately
reversed as standard, other rung
orientations can be produced to
Straight length
order. Additionally alternative
widths are also available to meet
the requirements of the European
markets.

Straight ladder

Rungs alternately 11.0mm x 38mm long slot holes Left hand reducer
reversed as standard at at 60mm centres in side rails
300mm max. centres
15

28 Crossover

Rung types Splice plate

50mm deep ladder range 100, 125 & 150mm deep ladder ranges
rung type: 28mm x 15mm channel rung type: 41mm x 21mm channel

21
15
30mm x 11mm slots at 50mm crs 22mm x 11mm slots at 25mm crs
28 41

10
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 11

Cable ladder systems

Cable ladder systems

Materials and finishes

90° Flat bend
Materials and finishes available are
mild steel hot dip galvanised after
manufacture as standard and stainless
steel grade 316 to order.
Mild steel hot dip galvanised:
manufactured from steel complying
Splice plates
with BS EN 10025-2:2004 and hot dip
galvanised after manufacture to
BS EN 1461:1999.
21 steel: manufactured from
Stainless 21

stainless steel grade 316L complying

31
with
50 BS EN 10088-2:2005 (pickling
and passivating on request).
Splice plates
50mm deep range
125
(1.5mm thick side rails)

Ladder profiles
21
21 21
External riser
45
75 31
50
Splice plate 21
50mm deep range
75mmthick
deepside
range 125
(1.5mm rails)
(1.5mm thick side rails)
Light duty
Internal riser 21

150
45
75 70
Splice plates 100
21

75mm deep range

(1.5mm thick side rails)
100mm deep range
21 (1.5mm thick side rails)
Medium duty
150
21 21

Splice plates 70
31 100
50
90° flat bend
95
50mm deep range
Splice plates 125
(1.5mm thick side rails)
100mm deep range
(1.5mm thick side rails)
21

Splice plates 125mm deep range

45 (2.0mm thick side rails)
75 Heavy duty

21

75mm deep range

(1.5mm thick side rails)

Splice plates21 120

150
Straight reducer
70
100

External riser
150mm deep range
(2.0mm thick side rails)
100mm deep range
(1.5mm thick side rails) Extra heavy duty

11
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 12

Cable ladder systems

Standards
Metstrut Cable Ladder Systems generally conform to 6.3 According to electrical continuity characteristics
BS EN 61537:2007 Cable management - cable tray 6.3.2 Metstrut cable ladder systems have electrical
systems and cable ladder systems continuity characteristics
Information relating to compliance is detailed/highlighted 6.4 According to electrical conductivity
within the following sections of the standard: 6.4.1 Metstrut cable ladder systems are electrically
conductive system components
6 Classification
6.1 According to material 6.5 According to resistance against corrosion
6.1.1 Metstrut cable ladder systems are metallic system 6.5.2 Metstrut cable ladder systems are made of steel with
components metallic finishes or stainless steel
( R e s i s t a n c e t o c or r o s i o n i s c l a s s i f i e d ac c o r d i n g t o
6.2 According to resistance to flame propagation

Ta b le 8 , wit h co mpli an ce a cco rd in g to Ta ble 7..)

Ta b le 1 . a n d fo llo w t he re le va n t sp ecif ica tio n in
6.6.2 Metstrut cable ladder systems are non - flame
propagating system components

Table 1 - classification for resistance against corrosion

Class Reference - material and finish
0 (a) None
1 Electroplated to a minimum thickness of 5 µm
2 Electroplated to a minimum thickness of 12 µm
3 Pre - galvanised to grade 275 to EN 10327 and EN 10326
4 Pre - galvanised to grade 350 to EN 10327 and EN 10326
5 Post - galvanised to a zinc mean coating thickness (minimum) of 45 µm according to ISO 1461 for zinc thickness only
6 Post - galvanised to a zinc mean coating thickness (minimum) of 55 µm according to ISO 1461 for zinc thickness only
7 Post - galvanised to a zinc mean coating thickness (minimum) of 70 µm according to ISO 1461 for zinc thickness only
8 Post - galvanised to a zinc mean coating thickness (minimum) of 85 µm according to ISO 1461 for zinc thickness only
9A Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S30400 or EN 10088 grade 1 - 4301 without a post treatment (b)
9B Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S31603 or EN 10088 grade 1 - 4404 without a post treatment (b)
9C Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S30400 or EN 10088 grade 1 - 4301 with a post treatment (b)
9D Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S31603 or EN 10088 grade 1 - 4404 with a post treatment (b)
(a) For materials which have no declared corrosion resistance classification
(b) The post - treatment process is used to improve the protection against crevice crack corrosion and the contamination by other steels

Table 7 - System component compliance and classification for Table 8 - Zinc coating thickness of reference
resistance against corrosion materials
System component Classification Compliance Subclause for Class Minimum Minimum coating Mean coating
Material and finishes according to compliance check thickness thickness as given in thickness (minimum)
EN 10327 or EN 10326 to ISO 1461
Non - metallic 6.5.1 Declaration 14.2.1
µm µm µm
Reference - 6.5.2 Table 1 Declaration 14.2.2 0 (a) - - -
zinc coating classes 1 to 8 or measurement 1 5 - -
as in Table 1. 2 12 - -
Non - referenced zinc 6.5.2 Table 1 By neutral salt 14.2.3 3 - 15 -
coating classes 1 to 8 spray test NSS 4 - 19 -
Reference - stainless 6.5.2 Table 1 Declaration 14.2.2 5 - - 45
steel as in Table 1. Class 9A to 9D 6 - - 55
7 - - 70
Non-referenced Not classified Declaration None 8 - - 85
stainless steel
(a) As declared by the manufacturer or responsible vendor
Other metallic coatings 6.5.2 Table 1 By neutral salt 14.2.3
Column 1 classes spray test NSS
1 to 8
Aluminium alloys or other 6.5.3 Under Under 14.2.4
metals consideration consideration
Organic coatings 6.5.4 Under Under 14.2.5
consideration consideration

12
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 13

Cable ladder systems

6.6 According to temperature Minimum internal radius of fittings

6.6.1 Minimum temperature for the system components is Minimal internal radius of fittings available for the
given in Table 2. accommodation of cables is 300 mm.
6.6.2 Maximum temperature for the system components is
9 Construction
given in Table 3.
9.1 Surfaces of system components which are likely to
Table 3 - Maximum come into contact with cables during installation are
Table 2 - Minimum
temperature classification temperature classification inspected to ensure they shall not cause damage to the
cables when installed correctly.
Minimum transport, storage Maximum transport, storage
installation and application installation and application 9.2 As with all metallic system components, care should be
temperature °C temperature °C exercised that handling is in accordance with the relative
+5 +40 COSHH regulations and gloves should be worn.
-5 +60
- 15 +90 9.3 Screwed connections have been designed to withstand
- 20 +105 the mechanical stresses occurring during installations and
- 40 +120 normal use and will not cause damage to cables when
- 50 +150 correctly inserted. Screwed connections are in general ISO
metric threads fully compliant to tests in accordance with
6.8 According to the free base area of the cable ladder
9.3.1 and 9.3.2 of the standard. Metstrut Cable Ladder
length as given in Table 5.
Systems are usually assembled using M10 cup square
Table 5 - Free base area classification bolts and hex nuts with lock washers for couplers etc
Classification Perforation in the free base area tightened to a torque of 45N/m. Other connections require
X Up to 80 % M10 hex bolts for clamps etc tightened to a torque of
Y Over 80 % and up to 90 %
Z More than 90 %
25N/m.
Note Classification Z relates to IEC 60364 - 5 - 52 10 Mechanical properties
Subclause A.52.6.2 third paragraph
Cable ladder lengths have been tested generally in
6.9 According to impact resistance accordance with the standard under 10.2 and 10.3 for
6.9.5 System component offering impact resistance up to verification of the loading graphs. It should be noted that
50 J (as verified by testing in accordance with 10.9 Test for independent testing has been carried out to verify the
impact resistance.) structural performance of the cable ladders at the

7.1 Each system component is marked by a label. Labels

7 Marking and documentation minimum and maximum temperature classifications for
test conditions under 10.2.2.
used fully comply with the rubbing test. Boxed items are All accessories eg bends, tees etc should be directly
labelled on the packaging supported by a suitable support device or devices at
8 Dimensions appropriate positions.

Key cross sectional dimensions for straight cable ladders

Part No. External Internal External Internal X-sectional
depth mm depth mm width mm width mm area mm2
(Internal)
LSL050/0150# 50 31.0 192 150 4650
LSL050/0300# 50 31.0 342 300 9300
LSL050/0450# 50 31.0 492 450 13950
LSL100/0150# 100 70.0 192 150 10500
LSL100/0300# 100 70.0 342 300 21000
LSL100/0450# 100 70.0 492 450 31500
LSL100/0600# 100 70.0 642 600 42000
LSL100/0750# 100 70.0 792 750 52500
LSL100/0900# 100 70.0 942 900 63000
LSL125/0150# 125 95.0 192 150 14250
LSL125/0300# 125 95.0 342 300 28500
LSL125/0450# 125 95.0 492 450 42750
LSL125/0600# 125 95.0 642 600 57000
LSL125/0750# 125 95.0 792 750 71250
LSL125/0900# 125 95.0 942 900 85500
LSL150/0150# 150 120.0 192 150 18000
LSL150/0300# 150 120.0 342 300 36000
LSL150/0450# 150 120.0 492 450 54000
LSL150/0600# 150 120.0 642 600 72000
LSL150/0750# 150 120.0 792 750 90000
LSL150/0900# 150 120.0 942 900 108000

13
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 14

Cable ladder systems

Cable ladder systems

Accessory footprint

Cable ladder — accessory foot print

standard radius is 300mm

90 90
DegDeg
flat flat
bendbend Crossover
Crossover

150150

Width Radius
Radius
Width Radius
Radius

Length = 150mm
Length = 150mm Length = 300mm
Length = 300mm
Width
Width + 2 x radius + width
+ radius + width
+ radius + width + 2 x radius + width
Radius
Radius
Radius
Radius Radius
Radius

150150 Radius
Radius Radius
Radius
150150
Width
Width Radius
Radius 150150
150150Radius Width Radius
Radius Width Radius150150
Length = 150mm
Length + radius
= 150mm + width
+ radius + width Length = 300mm
Length + 2+x2radius
= 300mm + width
x radius + width

Equal teetee
Equal Unequal teetee
Unequal

Width
Width

Length = 150mm
Length = 150mm Width 1 1
Width
+ radius + width
+ radius + width
Radius
Radius Length = 150mm
Length = 150mm
+ radius + width
+ radius 1 1
+ width
Radius
Radius Radius
Radius
150150
Radius
Radius
150150Radius
Radius Width
Width Radius
Radius150150
Length = 300mm
Length + 2+x2radius
= 300mm + width
x radius + width Radius
Radius Radius
Radius
150150
150150Radius
Radius Width 2 2 Radius
Width Radius150150
Length = 300mm
Length + 2+x2radius
= 300mm + width
x radius 2 2
+ width

90 90
DegDeg
riser
riser Straight or right/left
Straight hand
or right/left reducer
hand reducer

500500
200200 200200

Width 1 1
Width Width 2 2
Width
Length = 80(Radius-30)
= 80
Length (Radius-30)
+ (Radius-30)
+ (Radius-30) Radius
Radius

500500
80 80 200200 200200
80 80 (Radius-30)
(Radius-30)
Length = 80mm
Length + (Radius-30)
= 80mm + (Radius-30)
Width 1 1
Width
Width 2 2
Width

Footprints are identical for all ranges

14
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 15

Cable ladder systems

Straight lengths

Straight length - light duty - 50mm deep

Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width 50mm deep Weight 50mm deep Weight

mm 3m long kg 6m long kg
150 LSL050/0150HDG/3 9.0 N/A N/A
300 LSL050/0300HDG/3 10.3 N/A N/A
450 LSL050/0450HDG/3 11.6 N/A N/A

Straight length - medium duty - 100mm deep

Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width 100mm deep Weight 100mm deep Weight

mm 3m long kg 6m long kg
150 LSL100/0150HDG/3 12.7 LSL100/0150HDG/6 25.4
300 LSL100/0300HDG/3 14.4 LSL100/0300HDG/6 28.8
450 LSL100/0450HDG/3 16.1 LSL100/0450HDG/6 32.2
600 LSL100/0600HDG/3 17.9 LSL100/0600HDG/6 35.8
750 LSL100/0750HDG/3 19.6 LSL100/0750HDG/6 39.2
900 LSL100/0900HDG/3 21.3 LSL100/0900HDG/6 42.6

Straight length - heavy duty - 125mm deep

Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width 125mm deep Weight 125mm deep Weight

mm 3m long kg 6m long kg
150 LSL125/0150HDG/3 19.1 LSL125/0150HDG/6 38.2
300 LSL125/0300HDG/3 20.8 LSL125/0300HDG/6 41.6
450 LSL125/0450HDG/3 22.5 LSL125/0450HDG/6 45.0
600 LSL125/0600HDG/3 24.2 LSL125/0600HDG/6 48.4
750 LSL125/0750HDG/3 26.0 LSL125/0750HDG/6 52.0
900 LSL125/0900HDG/3 27.7 LSL125/0900HDG/6 55.4

Straight length - extra heavy duty - 150mm deep

Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width 150mm deep Weight 150mm deep Weight

mm 3m long kg 6m long kg
150 LSL150/0150HDG/3 21.4 LSL150/0150HDG/6 42.8
300 LSL150/0300HDG/3 23.1 LSL150/0300HDG/6 46.2
450 LSL150/0450HDG/3 24.9 LSL150/0450HDG/6 49.8
600 LSL150/0600HDG/3 26.6 LSL150/0600HDG/6 53.2
750 LSL150/0750HDG/3 28.3 LSL150/0750HDG/6 56.6
900 LSL150/0900HDG/3 30.0 LSL150/0900HDG/6 60.0

15
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 16

Cable ladder systems

Cable ladder systems

Flat bends

90° Flat bend

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LFB050/0150HDG/90R300 LFB100/0150HDG/90R300 LFB125/0150HDG/90R300 LFB150/0150HDG/90R300
300 LFB050/0300HDG/90R300 LFB100/0300HDG/90R300 LFB125/0300HDG/90R300 LFB150/0300HDG/90R300
450 LFB050/0450HDG/90R300 LFB100/0450HDG/90R300 LFB125/0450HDG/90R300 LFB150/0450HDG/90R300
600 N/A LFB100/0600HDG/90R300 LFB125/0600HDG/90R300 LFB150/0600HDG/90R300
750 N/A LFB100/0750HDG/90R300 LFB125/0750HDG/90R300 LFB150/0750HDG/90R300
900 N/A LFB100/0900HDG/90R300 LFB125/0900HDG/90R300 LFB150/0900HDG/90R300

60 º Flat bend
Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LFB050/0150HDG/60R300 LFB100/0150HDG/60R300 LFB125/0150HDG/60R300 LFB150/0150HDG/60R300
300 LFB050/0300HDG/60R300 LFB100/0300HDG/60R300 LFB125/0300HDG/60R300 LFB150/0300HDG/60R300
450 LFB050/0450HDG/60R300 LFB100/0450HDG/60R300 LFB125/0450HDG/60R300 LFB150/0450HDG/60R300
600 N/A LFB100/0600HDG/60R300 LFB125/0600HDG/60R300 LFB150/0600HDG/60R300
750 N/A LFB100/0750HDG/60R300 LFB125/0750HDG/60R300 LFB150/0750HDG/60R300
900 N/A LFB100/0900HDG/60R300 LFB125/0900HDG/60R300 LFB150/0900HDG/60R300

45 º Flat bend
Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LFB050/0150HDG/45R300 LFB100/0150HDG/45R300 LFB125/0150HDG/45R300 LFB150/0150HDG/45R300
300 LFB050/0300HDG/45R300 LFB100/0300HDG/45R300 LFB125/0300HDG/45R300 LFB150/0300HDG/45R300
450 LFB050/0450HDG/45R300 LFB100/0450HDG/45R300 LFB125/0450HDG/45R300 LFB150/0450HDG/45R300
600 N/A LFB100/0600HDG/45R300 LFB125/0600HDG/45R300 LFB150/0600HDG/45R300
750 N/A LFB100/0750HDG/45R300 LFB125/0750HDG/45R300 LFB150/0750HDG/45R300
900 N/A LFB100/0900HDG/45R300 LFB125/0900HDG/45R300 LFB150/0900HDG/45R300

30º Flat bend

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LFB050/0150HDG/30R300 LFB100/0150HDG/30R300 LFB125/0150HDG/30R300 LFB150/0150HDG/30R300
300 LFB050/0300HDG/30R300 LFB100/0300HDG/30R300 LFB125/0300HDG/30R300 LFB150/0300HDG/30R300
450 LFB050/0450HDG/30R300 LFB100/0450HDG/30R300 LFB125/0450HDG/30R300 LFB150/0450HDG/30R300
600 N/A LFB100/0600HDG/30R300 LFB125/0600HDG/30R300 LFB150/0600HDG/30R300
750 N/A LFB100/0750HDG/30R300 LFB125/0750HDG/30R300 LFB150/0750HDG/30R300
900 N/A LFB100/0900HDG/30R300 LFB125/0900HDG/30R300 LFB150/0900HDG/30R300

16
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 17

Cable ladder systems

Equal tee
Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LET050/0150HDGR300 LET100/0150HDGR300 LET125/0150HDGR300 LET150/0150HDGR300
300 LET050/0300HDGR300 LET100/0300HDGR300 LET125/0300HDGR300 LET150/0300HDGR300
450 LET050/0450HDGR300 LET100/0450HDGR300 LET125/0450HDGR300 LET150/0450HDGR300
600 N/A LET100/0600HDGR300 LET125/0600HDGR300 LET150/0600HDGR300
750 N/A LET100/0750HDGR300 LET125/0750HDGR300 LET150/0750HDGR300
900 N/A LET100/0900HDGR300 LET125/0900HDGR300 LET150/0900HDGR300

Unequal tee (made to order)

Standard radius 300mm = R300, other radii R450, R600, R750 and R900.
Finish: Hot Dip Galvanised = HDG, substitute SS within part number for stainless steel grade 316

How to generate the part number - LUT (depth)/W1/W2(finish) (radius)

Example - LUT100/300/150/HDGR300
Table below shows a complete list of W1 and W2 combinations.
W1 W2 W1 W2 W1 W2 W1 W2
150 300 300 750 600 300 750 900
150 450 300 900 600 450 900 150 W1
150 600 450 150 600 750 900 300 W2
150 750 450 300 600 900 900 450
150 900 450 600 750 150 900 600
300 150 450 750 750 300 900 750
300 450 450 900 750 450
300 600 600 150 750 600

Crossover
Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LCO050/0150HDGR300 LCO100/0150HDGR300 LCO125/0150HDGR300 LCO150/0150HDGR300
300 LCO050/0300HDGR300 LCO100/0300HDGR300 LCO125/0300HDGR300 LCO150/0300HDGR300
450 LCO050/0450HDGR300 LCO100/0450HDGR300 LCO125/0450HDGR300 LCO150/0450HDGR300
600 N/A LCO100/0600HDGR300 LCO125/0600HDGR300 LCO150/0600HDGR300
750 N/A LCO100/0750HDGR300 LCO125/0750HDGR300 LCO150/0750HDGR300
900 N/A LCO100/0900HDGR300 LCO125/0900HDGR300 LCO150/0900HDGR300

17
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 18

Cable ladder systems

Cable ladder systems

Straight reducer
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316 W2

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
W1 W2
300 150 LSR050/0300/0150HDG LSR100/0300/0150HDG LSR125/0300/0150HDG LSR150/0300/0150HDG
W1
450 150 LSR050/0450/0150HDG LSR100/0450/0150HDG LSR125/0450/0150HDG LSR150/0450/0150HDG
600 150 LSR050/0600/0150HDG LSR100/0600/0150HDG LSR125/0600/0150HDG LSR150/0600/0150HDG
750 150 N/A LSR100/0750/0150HDG LSR125/0750/0150HDG LSR150/0750/0150HDG
900 150 N/A LSR100/0900/0150HDG LSR125/0900/0150HDG LSR150/0900/0150HDG
450 300 LSR050/0450/0300HDG LSR100/0450/0300HDG LSR125/0450/0300HDG LSR150/0450/0300HDG
600 300 LSR050/0600/0300HDG LSR100/0600/0300HDG LSR125/0600/0300HDG LSR150/0600/0300HDG
750 300 N/A LSR100/0750/0300HDG LSR125/0750/0300HDG LSR150/0750/0300HDG
900 300 N/A LSR100/0900/0300HDG LSR125/0900/0300HDG LSR150/0900/0300HDG
600 450 LSR050/0600/0450HDG LSR100/0600/0450HDG LSR125/0600/0450HDG LSR150/0600/0450HDG
750 450 N/A LSR100/0750/0450HDG LSR125/0750/0450HDG LSR150/0750/0450HDG
900 450 N/A LSR100/0900/0450HDG LSR125/0900/0450HDG LSR150/0900/0450HDG
750 600 N/A LSR100/0750/0600HDG LSR125/0750/0600HDG LSR150/0750/0600HDG
900 600 N/A LSR100/0900/0600HDG LSR125/0900/0600HDG LSR150/0900/0600HDG
900 750 N/A LSR100/0900/0750HDG LSR125/0900/0750HDG LSR150/0900/0750HDG

Left hand reducer

Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316 W2

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
W1 W2
W1
300 150 LLR050/0300/0150HDG LLR100/0300/0150HDG LLR125/0300/0150HDG LLR150/0300/0150HDG
450 150 LLR050/0450/0150HDG LLR100/0450/0150HDG LLR125/0450/0150HDG LLR150/0450/0150HDG
600 150 LLR050/0600/0150HDG LLR100/0600/0150HDG LLR125/0600/0150HDG LLR150/0600/0150HDG
750 150 N/A LLR100/0750/0150HDG LLR125/0750/0150HDG LLR150/0750/0150HDG
900 150 N/A LLR100/0900/0150HDG LLR125/0900/0150HDG LLR150/0900/0150HDG
450 300 LLR050/0450/0300HDG LLR100/0450/0300HDG LLR125/0450/0300HDG LLR150/0450/0300HDG
600 300 LLR050/0600/0300HDG LLR100/0600/0300HDG LLR125/0600/0300HDG LLR150/0600/0300HDG
750 300 N/A LLR100/0750/0300HDG LLR125/0750/0300HDG LLR150/0750/0300HDG
900 300 N/A LLR100/0900/0300HDG LLR125/0900/0300HDG LLR150/0900/0300HDG
600 450 LLR050/0600/0450HDG LLR100/0600/0450HDG LLR125/0600/0450HDG LLR150/0600/0450HDG
750 450 N/A LLR100/0750/0450HDG LLR125/0750/0450HDG LLR150/0750/0450HDG
900 450 N/A LLR100/0900/0450HDG LLR125/0900/0450HDG LLR150/0900/0450HDG
750 600 N/A LLR100/0750/0600HDG LLR125/0750/0600HDG LLR150/0750/0600HDG
900 600 N/A LLR100/0900/0600HDG LLR125/0900/0600HDG LLR150/0900/0600HDG
900 750 N/A LLR100/0900/0750HDG LLR125/0900/0750HDG LLR150/0900/0750HDG

18
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 19

Cable ladder systems

Right hand reducer

W2
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
W1 W2
300 150 LRR050/0300/0150HDG LRR100/0300/0150HDG LRR125/0300/0150HDG LRR150/0300/0150HDG
450 150 LRR050/0450/0150HDG LRR100/0450/0150HDG LRR125/0450/0150HDG LRR150/0450/0150HDG
W1
600 150 LRR050/0600/0150HDG LRR100/0600/0150HDG LRR125/0600/0150HDG LRR150/0600/0150HDG
750 150 N/A LRR100/0750/0150HDG LRR125/0750/0150HDG LRR150/0750/0150HDG
900 150 N/A LRR100/0900/0150HDG LRR125/0900/0150HDG LRR150/0900/0150HDG
450 300 LRR050/0450/0300HDG LRR100/0450/0300HDG LRR125/0450/0300HDG LRR150/0450/0300HDG
600 300 LRR050/0600/0300HDG LRR100/0600/0300HDG LRR125/0600/0300HDG LRR150/0600/0300HDG
750 300 N/A LRR100/0750/0300HDG LRR125/0750/0300HDG LRR150/0750/0300HDG
900 300 N/A LRR100/0900/0300HDG LRR125/0900/0300HDG LRR150/0900/0300HDG
600 450 LRR050/0600/0450HDG LRR100/0600/0450HDG LRR125/0600/0450HDG LRR150/0600/0450HDG
750 450 N/A LRR100/0750/0450HDG LRR125/0750/0450HDG LRR150/0750/0450HDG
900 450 N/A LRR100/0900/0450HDG LRR125/0900/0450HDG LRR150/0900/0450HDG
750 600 N/A LRR100/0750/0600HDG LRR125/0750/0600HDG LRR150/0750/0600HDG
900 600 N/A LRR100/0900/0600HDG LRR125/0900/0600HDG LRR150/0900/0600HDG
900 750 N/A LRR100/0900/0750HDG LRR125/0900/0750HDG LRR150/0900/0750HDG

90º External riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LER050/0150HDG/90R300 LER100/0150HDG/90R300 LER125/0150HDG/90R300 LER150/0150HDG/90R300
300 LER050/0300HDG/90R300 LER100/0300HDG/90R300 LER125/0300HDG/90R300 LER150/0300HDG/90R300
450 LER050/0450HDG/90R300 LER100/0450HDG/90R300 LER125/0450HDG/90R300 LER150/0450HDG/90R300
600 N/A LER100/0600HDG/90R300 LER125/0600HDG/90R300 LER150/0600HDG/90R300
750 N/A LER100/0750HDG/90R300 LER125/0750HDG/90R300 LER150/0750HDG/90R300
900 N/A LER100/0900HDG/90R300 LER125/0900HDG/90R300 LER150/0900HDG/90R300

60º External riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LER050/0150HDG/60R300 LER100/0150HDG/60R300 LER125/0150HDG/60R300 LER150/0150HDG/60R300
300 LER050/0300HDG/60R300 LER100/0300HDG/60R300 LER125/0300HDG/60R300 LER150/0300HDG/60R300
450 LER050/0450HDG/60R300 LER100/0450HDG/60R300 LER125/0450HDG/60R300 LER150/0450HDG/60R300
600 N/A LER100/0600HDG/60R300 LER125/0600HDG/60R300 LER150/0600HDG/60R300
750 N/A LER100/0750HDG/60R300 LER125/0750HDG/60R300 LER150/0750HDG/60R300
900 N/A LER100/0900HDG/60R300 LER125/0900HDG/60R300 LER150/0900HDG/60R300

19
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 20

Cable ladder systems

Cable ladder systems

45º External riser
Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LER050/0150HDG/45R300 LER100/0150HDG/45R300 LER125/0150HDG/45R300 LER150/0150HDG/45R300
300 LER050/0300HDG/45R300 LER100/0300HDG/45R300 LER125/0300HDG/45R300 LER150/0300HDG/45R300
450 LER050/0450HDG/45R300 LER100/0450HDG/45R300 LER125/0450HDG/45R300 LER150/0450HDG/45R300
600 N/A LER100/0600HDG/45R300 LER125/0600HDG/45R300 LER150/0600HDG/45R300
750 N/A LER100/0750HDG/45R300 LER125/0750HDG/45R300 LER150/0750HDG/45R300
900 N/A LER100/0900HDG/45R300 LER125/0900HDG/45R300 LER150/0900HDG/45R300

30º External riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LER050/0150HDG/30R300 LER100/0150HDG/30R300 LER125/0150HDG/30R300 LER150/0150HDG/30R300
300 LER050/0300HDG/30R300 LER100/0300HDG/30R300 LER125/0300HDG/30R300 LER150/0300HDG/30R300
450 LER050/0450HDG/30R300 LER100/0450HDG/30R300 LER125/0450HDG/30R300 LER150/0450HDG/30R300
600 N/A LER100/0600HDG/30R300 LER125/0600HDG/30R300 LER150/0600HDG/30R300
750 N/A LER100/0750HDG/30R300 LER125/0750HDG/30R300 LER150/0750HDG/30R300
900 N/A LER100/0900HDG/30R300 LER125/0900HDG/30R300 LER150/0900HDG/30R300

90º Internal riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LIR050/0150HDG/90R300 LIR100/0150HDG/90R300 LIR125/0150HDG/90R300 LIR150/0150HDG/90R300
300 LIR050/0300HDG/90R300 LIR100/0300HDG/90R300 LIR125/0300HDG/90R300 LIR150/0300HDG/90R300
450 LIR050/0450HDG/90R300 LIR100/0450HDG/90R300 LIR125/0450HDG/90R300 LIR150/0450HDG/90R300
600 N/A LIR100/0600HDG/90R300 LIR125/0600HDG/90R300 LIR150/0600HDG/90R300
750 N/A LIR100/0750HDG/90R300 LIR125/0750HDG/90R300 LIR150/0750HDG/90R300
900 N/A LIR100/0900HDG/90R300 LIR125/0900HDG/90R300 LIR150/0900HDG/90R300

60º Internal riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LIR050/0150HDG/60R300 LIR100/0150HDG/60R300 LIR125/0150HDG/60R300 LIR150/0150HDG/60R300
300 LIR050/0300HDG/60R300 LIR100/0300HDG/60R300 LIR125/0300HDG/60R300 LIR150/0300HDG/60R300
450 LIR050/0450HDG/60R300 LIR100/0450HDG/60R300 LIR125/0450HDG/60R300 LIR150/0450HDG/60R300
600 N/A LIR100/0600HDG/60R300 LIR125/0600HDG/60R300 LIR150/0600HDG/60R300
750 N/A LIR100/0750HDG/60R300 LIR125/0750HDG/60R300 LIR150/0750HDG/60R300
900 N/A LIR100/0900HDG/60R300 LIR125/0900HDG/60R300 LIR150/0900HDG/60R300

20
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 21

Cable ladder systems

45º Internal riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LIR050/0150HDG/45R300 LIR100/0150HDG/45R300 LIR125/0150HDG/45R300 LIR150/0150HDG/45R300
300 LIR050/0300HDG/45R300 LIR100/0300HDG/45R300 LIR125/0300HDG/45R300 LIR150/0300HDG/45R300
450 LIR050/0450HDG/45R300 LIR100/0450HDG/45R300 LIR125/0450HDG/45R300 LIR150/0450HDG/45R300
600 N/A LIR100/0600HDG/45R300 LIR125/0600HDG/45R300 LIR150/0600HDG/45R300
750 N/A LIR100/0750HDG/45R300 LIR125/0750HDG/45R300 LIR150/0750HDG/45R300
900 N/A LIR100/0900HDG/45R300 LIR125/0900HDG/45R300 LIR150/0900HDG/45R300

30º Internal riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LIR050/0150HDG/30R300 LIR100/0150HDG/30R300 LIR125/0150HDG/30R300 LIR150/0150HDG/30R300
300 LIR050/0300HDG/30R300 LIR100/0300HDG/30R300 LIR125/0300HDG/30R300 LIR150/0300HDG/30R300
450 LIR050/0450HDG/30R300 LIR100/0450HDG/30R300 LIR125/0450HDG/30R300 LIR150/0450HDG/30R300
600 N/A LIR100/0600HDG/30R300 LIR125/0600HDG/30R300 LIR150/0600HDG/30R300
750 N/A LIR100/0750HDG/30R300 LIR125/0750HDG/30R300 LIR150/0750HDG/30R300
900 N/A LIR100/0900HDG/30R300 LIR125/0900HDG/30R300 LIR150/0900HDG/30R300

Articulated riser
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 N/A L/AR100/0150HDG L/AR125/0150HDG L/AR150/0150HDG
300 N/A L/AR100/0300HDG L/AR125/0300HDG L/AR150/0300HDG
450 N/A L/AR100/0450HDG L/AR125/0450HDG L/AR150/0450HDG
600 N/A L/AR100/0600HDG L/AR125/0600HDG L/AR150/0600HDG
750 N/A L/AR100/0750HDG L/AR125/0750HDG L/AR150/0750HDG
900 N/A L/AR100/0900HDG L/AR125/0900HDG L/AR150/0900HDG

21
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 22

Cable ladder systems

Cable ladder systems

Cover - straight length - 1.5m long (and fixing clamps)
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners, 2 covers required for 3m ladder, 4 covers for 6m ladder

Width Extra fixing clamps

mm Pack of 10 (includes fasteners)
150 LSLC/0150HDG/1.5 Standard cover clip

300 LSLC/0300HDG/1.5 L/CCC

450 LSLC/0450HDG/1.5
600 LSLC/0600HDG/1.5
750 LSLC/0750HDG/1.5
900 LSLC/0900HDG/1.5 Ventilated cover clip
L/CCV

Cover - 90º flat bend

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width
mm
150 LFBC/0150HDG/90R300
300 LFBC/0300HDG/90R300
450 LFBC/0450HDG/90R300
600 LFBC/0600HDG/90R300
750 LFBC/0750HDG/90R300
900 LFBC/0900HDG/90R300

Cover - 60º flat bend

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width
mm
150 LFBC/0150HDG/60R300
300 LFBC/0300HDG/60R300
450 LFBC/0450HDG/60R300
600 LFBC/0600HDG/60R300
750 LFBC/0750HDG/60R300
900 LFBC/0900HDG/60R300

Cover - 45º flat bend

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width
mm
150 LFBC/0150HDG/45R300
300 LFBC/0300HDG/45R300
450 LFBC/0450HDG/45R300
600 LFBC/0600HDG/45R300
750 LFBC/0750HDG/45R300
900 LFBC/0900HDG/45R300

22
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 23

Cable ladder systems

Cover - 30º flat bend

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width
mm
150 LFBC/0150HDG/30R300
300 LFBC/0300HDG/30R300
450 LFBC/0450HDG/30R300
600 LFBC/0600HDG/30R300
750 LFBC/0750HDG/30R300
900 LFBC/0900HDG/30R300

Cover - equal tee

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 6 fixing clamps and fasteners

Width
mm
150 LETC/0150HDGR300
300 LETC/0300HDGR300
450 LETC/0450HDGR300
600 LETC/0600HDGR300
750 LETC/0750HDGR300
900 LETC/0900HDGR300

Cover - unequal tee (made to order)

Standard radius 300mm = R300, other radii R450, R600, R750 and R900.
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 6 fixing clamps and fasteners

How to generate the part number - LUT (cover type)/W1/W2(finish) (radius)

Example - LUTC/300/150/HDGR300
Table below shows a complete list of W1 and W2 combinations.
W1 W2 W1 W2 W1 W2 W1 W2 W2
W1
150 300 300 750 600 300 750 900
150 450 300 900 600 450 900 150
150 600 450 150 600 750 900 300
150 750 450 300 600 900 900 450
150 900 450 600 750 150 900 600
300 150 450 750 750 300 900 750
300 450 450 900 750 450
300 600 600 150 750 600

Cover - crossover
Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order).
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 8 fixing clamps and fasteners

Width
mm
150 LCOC/0150HDGR300
300 LCOC/0300HDGR300
450 LCOC/0450HDGR300
600 LCOC/0600HDGR300
750 LCOC/0750HDGR300
900 LCOC/0900HDGR300

23
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 24

Cable ladder systems

Cable ladder systems

Cover - straight reducer
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316 W2
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width
mm W1
W1 W2
300 150 LSRC/0300/0150HDG
450 150 LSRC/0450/0150HDG
600 150 LSRC/0600/0150HDG
750 150 LSRC/0750/0150HDG
900 150 LSRC/0900/0150HDG
450 300 LSRC/0450/0300HDG
600 300 LSRC/0600/0300HDG
750 300 LSRC/0750/0300HDG
900 300 LSRC/0900/0300HDG
600 450 LSRC/0600/0450HDG
750 450 LSRC/0750/0450HDG
900 450 LSRC/0900/0450HDG
750 600 LSRC/0750/0600HDG
900 600 LSRC/0900/0600HDG
900 750 LSRC/0900/0750HDG

Cover - left hand reducer

Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316 W2
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width W1
mm
W1 W2
300 150 LLRC/0300/0150HDG
450 150 LLRC/0450/0150HDG
600 150 LLRC/0600/0150HDG
750 150 LLRC/0750/0150HDG
900 150 LLRC/0900/0150HDG
450 300 LLRC/0450/0300HDG
600 300 LLRC/0600/0300HDG
750 300 LLRC/0750/0300HDG
900 300 LLRC/0900/0300HDG
600 450 LLRC/0600/0450HDG
750 450 LLRC/0750/0450HDG
900 450 LLRC/0900/0450HDG
750 600 LLRC/0750/0600HDG
900 600 LLRC/0900/0600HDG
900 750 LLRC/0900/0750HDG

24
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 25

Cable ladder systems

Cover - right hand reducer

W2
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width
mm W1
W1 W2
300 150 LRRC/0300/0150HDG
450 150 LRRC/0450/0150HDG
600 150 LRRC/0600/0150HDG
750 150 LRRC/0750/0150HDG
900 150 LRRC/0900/0150HDG
450 300 LRRC/0450/0300HDG
600 300 LRRC/0600/0300HDG
750 300 LRRC/0750/0300HDG
900 300 LRRC/0900/0300HDG
600 450 LRRC/0600/0450HDG
750 450 LRRC/0750/0450HDG
900 450 LRRC/0900/0450HDG
750 600 LRRC/0750/0600HDG
900 600 LRRC/0900/0600HDG
900 750 LRRC/0900/0750HDG

Cover - 90º external riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (Made to order)
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LERC050/0150HDG/90R300 LERC100/0150HDG/90R300 LERC125/0150HDG/90R300 LERC150/0150HDG/90R300
300 LERC050/0300HDG/90R300 LERC100/0300HDG/90R300 LERC125/0300HDG/90R300 LERC150/0300HDG/90R300
450 LERC050/0450HDG/90R300 LERC100/0450HDG/90R300 LERC125/0450HDG/90R300 LERC150/0450HDG/90R300
600 N/A LERC100/0600HDG/90R300 LERC125/0600HDG/90R300 LERC150/0600HDG/90R300
750 N/A LERC100/0750HDG/90R300 LERC125/0750HDG/90R300 LERC150/0750HDG/90R300
900 N/A LERC100/0900HDG/90R300 LERC125/0900HDG/90R300 LERC150/0900HDG/90R300

Cover - 60º external riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (Made to order)
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LERC050/0150HDG/60R300 LERC100/0150HDG/60R300 LERC125/0150HDG/60R300 LERC150/0150HDG/60R300
300 LERC050/0300HDG/60R300 LERC100/0300HDG/60R300 LERC125/0300HDG/60R300 LERC150/0300HDG/60R300
450 LERC050/0450HDG/60R300 LERC100/0450HDG/60R300 LERC125/0450HDG/60R300 LERC150/0450HDG/60R300
600 N/A LERC100/0600HDG/60R300 LERC125/0600HDG/60R300 LERC150/0600HDG/60R300
750 N/A LERC100/0750HDG/60R300 LERC125/0750HDG/60R300 LERC150/0750HDG/60R300
900 N/A LERC100/0900HDG/60R300 LERC125/0900HDG/60R300 LERC150/0900HDG/60R300

25
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 26

Cable ladder systems

Cable ladder systems

Cover - 45º external riser
Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order)
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LERC050/0150HDG/45R300 LERC100/0150HDG/45R300 LERC125/0150HDG/45R300 LERC150/0150HDG/45R300
300 LERC050/0300HDG/45R300 LERC100/0300HDG/45R300 LERC125/0300HDG/45R300 LERC150/0300HDG/45R300
450 LERC050/0450HDG/45R300 LERC100/0450HDG/45R300 LERC125/0450HDG/45R300 LERC150/0450HDG/45R300
600 N/A LERC100/0600HDG/45R300 LERC125/0600HDG/45R300 LERC150/0600HDG/45R300
750 N/A LERC100/0750HDG/45R300 LERC125/0750HDG/45R300 LERC150/0750HDG/45R300
900 N/A LERC100/0900HDG/45R300 LERC125/0900HDG/45R300 LERC150/0900HDG/45R300

Cover - 30º external riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order)
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 LERC050/0150HDG/30R300 LERC100/0150HDG/30R300 LERC125/0150HDG/30R300 LERC150/0150HDG/30R300
300 LERC050/0300HDG/30R300 LERC100/0300HDG/30R300 LERC125/0300HDG/30R300 LERC150/0300HDG/30R300
450 LERC050/0450HDG/30R300 LERC100/0450HDG/30R300 LERC125/0450HDG/30R300 LERC150/0450HDG/30R300
600 N/A LERC100/0600HDG/30R300 LERC125/0600HDG/30R300 LERC150/0600HDG/30R300
750 N/A LERC100/0750HDG/30R300 LERC125/0750HDG/30R300 LERC150/0750HDG/30R300
900 N/A LERC100/0900HDG/30R300 LERC125/0900HDG/30R300 LERC150/0900HDG/30R300

Cover - 90º internal riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order)
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width
mm
150 LIRC/0150HDG/90R300
300 LIRC/0300HDG/90R300
450 LIRC/0450HDG/90R300
600 LIRC/0600HDG/90R300
750 LIRC/0750HDG/90R300
900 LIRC/0900HDG/90R300

26
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 27

Cable ladder systems

Cover - 60º internal riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order)
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width
mm
150 LIRC/0150HDG/60R300
300 LIRC/0300HDG/60R300
450 LIRC/0450HDG/60R300
600 LIRC/0600HDG/60R300
750 LIRC/0750HDG/60R300
900 LIRC/0900HDG/60R300

Cover - 45º internal riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order)
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width
mm
150 LIRC/0150HDG/45R300
300 LIRC/0300HDG/45R300
450 LIRC/0450HDG/45R300
600 LIRC/0600HDG/45R300
750 LIRC/0750HDG/45R300
900 LIRC/0900HDG/45R300

Cover - 30º internal riser

Standard radius 300mm = R300, other radii R450, R600, R750 and R900 (made to order)
Finish: hot dip galvanised = HDG, substitute SS within part number for stainless steel grade 316
Standard closed covers = C, ventilated cover = CV
Includes 4 fixing clamps and fasteners

Width
mm
150 LIRC/0150HDG/30R300
300 LIRC/0300HDG/30R300
450 LIRC/0450HDG/30R300
600 LIRC/0600HDG/30R300
750 LIRC/0750HDG/30R300
900 LIRC/0900HDG/30R300

27
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 28

Cable ladder systems

Cable ladder systems

Splice plates
Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/SSP100SSPR

Ladder depth Sold in pairs

mm (includes 16 nuts, bolts and washers)
50 L/SSP50PR
100 L/SSP100PR
125 L/SSP125PR
150 L/SSP150PR

Vertical splice plates

Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/VSP100SSPR

Ladder depth Sold in pairs

mm (includes 16 nuts, bolts and washers)
50 L/VSP50PR
100 L/VSP100PR
125 L/VSP125PR
150 L/VSP150PR

Horizontal splice plates

Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/HSP100SSPR

Ladder depth Sold in pairs

mm (includes 16 nuts, bolts and washers)
50 L/HSP50PR
100 L/HSP100PR
125 L/HSP125PR
150 L/HSP150PR

Reducer plate
Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/RSP100SS

Ladder depth Sold as single item

mm (includes 8 nuts, bolts and washers)
50 L/RSP50
100 L/RSP100
125 L/RSP125
150 L/RSP150

Hold down bracket

Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/HDB100SS

Ladder depth Sold as single item

mm (fasteners excluded)
50 L/HDB50
100 L/HDB100
125 L/HDB125
150 L/HDB150

28
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 29

Cable ladder systems

Suspension clip
Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/SC100SS

Ladder depth Sold as single item

depth mm (Fasteners excluded)
50 L/SC50
100 L/SC100
125 L/SC125
150 L/SC150

Hold down clip

Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/HDC/ASS

Sold as single item

(Fasteners excluded)
L/HDC/A

Bolted hold down clip

Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/HDC/BSS

Sold as single item

(Fasteners excluded)
L/HDC/B

Side rail clamp

Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/SRC/SS

Sold as single item

(Fasteners excluded)
L/SRC

Expansion couplers
Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/EC/100SSPR

Ladder depth Sold in pairs

mm (includes 16 nuts, bolts and washers)
50 L/EC/50PR
100 L/EC/100PR
125 L/EC/125PR
150 L/EC/150PR

29
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 30

Cable ladder systems

Cable ladder systems

Bendable splice plates
Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/BSP100/SSPR

Ladder depth Sold in pairs

mm (includes 16 nuts, bolts and washers)
50 L/BSP050/PR
100 L/BSP100/PR
125 L/BSP125/PR
150 L/BSP150/PR

End connectors
Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/ECO100SSPR

Ladder depth Sold in pairs

mm (fasteners excluded)
50 L/ECO50PR
100 L/ECO100PR
125 L/ECO125PR
150 L/ECO150PR

Stop ends
Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/SE100/0300SS

Sold as single item (fasteners excluded)

Width Light duty Medium duty Heavy duty Extra heavy duty
mm 50mm deep 100mm deep 125mm deep 150mm deep
150 L/SE050/0150 L/SE100/0150 L/SE125/0150 L/SE150/0150
300 L/SE050/0300 L/SE100/0300 L/SE125/0300 L/SE150/0300
450 L/SE050/0450 L/SE100/0450 L/SE125/0450 L/SE150/0450
600 N/A L/SE100/0600 L/SE125/0600 L/SE150/0600
750 N/A L/SE100/0750 L/SE125/0750 L/SE150/0750
900 N/A L/SE100/0900 L/SE125/0900 L/SE150/0900

Drop out plates

Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/DOP300SS

Ladder width Sold as single item

mm (fasteners excluded)
150 L/DOP150
300 L/DOP300
450 L/DOP450
600 L/DOP600
750 L/DOP750
900 L/DOP900

30
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 31

Cable ladder systems

Drop out brackets

Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/RTR100SS

Ladder depth Sold in pairs

mm (fasteners excluded)
50 N/A
100 L/RTR100/PR
125 L/RTR125/PR
150 L/RTR150/PR

Wall brackets
Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. L/WSB100SSPR

Ladder depth Sold in pairs

depth mm (fasteners excluded)
50 L/WSB050PR
100 L/WSB100PR
125 L/WSB125PR
150 L/WSB150PR

Straight divider – 3m long

Finish: hot dip galvanised as standard. For stainless steel grade 316 add SS e.g. LSD100/3SS

Ladder depth Sold as single item

mm (fasteners excluded)
50 LSD050/3
100 LSD100/3
125 LSD125/3
150 LSD150/3

Bendable divider – 1m long

Finish: Hot Dip Galvanised as standard. For stainless steel grade 316 add SS e.g. LBD100/SS

Ladder depth Sold as single item

depth mm (fasteners excluded)
50 LBD050
100 LBD100
125 LBD125
150 LBD150

Earth straps
Finish: copper braid electrotinned – 16mm2

250mm long
(fasteners excluded)
L/ES250

31
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 6

Introduction

Product range summary

Manufacturing solutions
Metstrut manufactures a broad range of cable
management products that includes Cable Tray,
Cable Ladder, Cable Trunking, Metal Framing
and Rapid Installation systems.

Centrally located within the West Midlands

close to major motorway networks, Metstrut is
able to offer a National service through major
electrical and mechanical distributors.

With over 10,000 m2 of manufacturing and

warehouse space, and state of the art
equipment, a strong emphasis is placed on
service, and a high level of ‘on-time in-full’
delivery performance is maintained.

Comprehensive stocks are carried at all times

and replenished through lean manufacturing
principles.

With the ever-increasing demand from clients

for value added products and services, Metstrut
offers a comprehensive pre-fabrication facility
that ranges from cut lengths of channel to Significant cost savings can be achieved by opting for prefabrication
bolted or welded frames both in 2D and 3D off site and skilled electricians are released to do what they are
configuration. Cable tray, ladder and trunking best at.
can be pre-installed if required. This allows the
contractor to schedule his requirements to Metstrut also offers a full design service for its products and services
overcome space and labour restrictions on site. to ensure the correct selection is made for the most cost effective
Waste is also greatly reduced and site safety solution. When required, CAD drawings are produced to ensure a
enhanced. full understanding of the solution is achieved.

6
 “
486.5 Metstrut final-04:Layout 1 20/4/10 17:11 Page 7

Product range summary

Product range
Cable ladder systems

Metstrut cable ladder systems are widely

accepted due to their strength to weight ratio
and simplicity of design. Easily installed and
with a comprehensive range of accessories,
Metstrut cable ladder systems can be found in
applications throughout the UK, Ireland and
mainland Europe.

Cable tray systems

Metstrut cable tray systems have been designed

after considerable consultation with end users
and installers to arrive at a final design that
satisfies all of their requirements. Each cable
tray range features a unique slotting pattern in
the base and the return flange ranges have
slotted sides. Additionally, each tray range has
the same footprint to aid setting out when final
loadings are not yet available.

Cable trunking systems

Metstrut cable trunking systems are available

as standard distribution trunking and also as
lighting trunking. Manufactured on state of
the art computer controlled equipment with a
high level of automation, Metstrut cable
trunking is of economic design to provide
competitive solutions.

Metal framing systems

Metstrut offers the traditional channel system in

a variety of profiles and gauges with a large
range of fittings and fasteners. The fully tested
system can be reliably used for a wide
application base for the support of mechanical
and electrical services.

A Rapid Installation version is also available

with a unique channel profile and pre-
assembled fittings with integral fixings.
By using this product range, installation times
are drastically reduced.

Both systems can be fully integrated for total

flexibility.