Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

322.720 MSDS

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Page 1 / 2

FLUOFOAM3@SAFETY .
. BIO FLUOFOAM 3 .
#3

SAFETY DATA SHEET


1 PRODUCT AND COMPANY IDENTIFICATION
TRADE NAME BIO FLUOFOAM 3
Recommended use Fire Fighting Foam Concentrate
MANUFACTURER BIO-EX SAS
∗ Address Z.I. La Petite Olivière - 69770 MONTROTTIER - FRANCE
∗ Phone n° +33-474.702.381.
∗ Fax n° +33-474.702.394.
∗ E-mail labo@bio-ex.fr

2 COMPOSITION / INFORMATION ON INGREDIENTS


Chemical characterisation Aqueous solution of surfactants
Hazardous components ButylDiGlycol Ether ( ButylCarbitol ) [5-10%]
Xi ; R36 / CAS N° : 112-34-5 / EINECS 203-961-6
AlkylSulfate [1-5%]
Xi ; R36/38
FluoroSurfactant [<1%]
F ; R10
3 HAZARDS IDENTIFICATION
Health hazards May cause mild irritation to eyes
Physical and chemical hazards Not flammable
Specific risks This product is not classified hazardous under European directive 1999/45/EC
4 FIRST AID MEASURES
After skin contact Wash off with water. Remove contaminated soaked clothing and rinse with water
After eye contact Flush eye with plenty of water for at least 10 minutes
After swallowing Wash mouth with water. Seek medical advice should pain occur and persist
5 FIRE FIGHTING MEASURES
Extinguishing media Not applicable. Fire fighting foam concentrate
Protective equipment for fire fighters Standard equipment against fires
6 ACCIDENTAL RELEASE MEASURES
Personal precautions Wear gloves and goggles
Environmental protection Absorb onto sand or other absorbent material and shovel into container for disposal
CLEANING MEASURES
∗ Collecting Pump into clearly identified unbreakable containers
∗ Cleaning Wash thoroughly with water
∗ Disposal Incineration according to local regulations
7 HANDLING AND STORAGE
HANDLING Standard equipment against chemicals
STORAGE
∗ Technical measures Storage area should contain accidental spill
∗ Storage conditions Sealed containers in normal cool warehouse
∗ Storage recommendations Product in bulk : stainless steel, polyester or mild steel protected with epoxy or
polyurethane coating. Tanks in PE, PP
Packaging material
∗ Recommended Polyethylene, Polypropylene, stainless steel
∗ Not advised Mild steel, iron, aluminium, copper and its alloys
∗ Recommended sealing Viton, Kevlar, Teflon

8 EXPOSURE CONTROL AND PERSONAL PROTECTION


PERSONAL PROTECTIVE EQUIPMENT
∗ Hand protection Impermeable gloves (PVC) if continual handling
∗ Eye protection Goggles
∗ Body protection Working clothes
HYGIENIC MEASURES DO NOT eat, drink or smoke while handling the product. Clean hands after working
Page 2 / 2

FLUOFOAM3@SAFETY .
. BIO FLUOFOAM 3 .
#3

SAFETY DATA SHEET

9 PHYSICAL AND CHEMICAL PROPERTIES


APPEARANCE
∗ Physical form Liquid
∗ Colour / Odour Yellow, synthetic smell
PH 8.0 +/- 1.0
Freezing point - 5°C
Boiling point + 100 °C
Flammability / oxidising / explosive properties None
Specific gravity at 20°C 1010 +/- 20 Kg / m3
Solubility Completely soluble in water

10 STABILITY AND REACTIVITY


Thermal decomposition Stable under normal conditions of use and storage
Hazardous reactions None expected in standard use
11 TOXICOLOGICAL DATA
Acute toxicity None to be expected
Local effects on the eye and skin Not irritant at the recommended concentration of use

12 ECOLOGICAL DATA
ENVIRONMENTAL BEHAVIOUR
* Biodegradation data ( 3% volume ) COD = 8686 mg O2 / l [ Test CE C5 ]
BOD5 = 6350 mg O2 / l [ Test CE C6 ]
* Biodegradation rate = 73% after 5 days : BIO FLUOFOAM 3 is readily biodegradable
Foaming agent if discharged in water
PerFluorinated Organic Compounds persist in environment
* Bio accumulative PFCs are suspected to bio accumulate in living beings
ECOTOXICITY
Aquatic life toxicity Not expected to be toxic after dilution

13 DISPOSAL CONDITIONS
PRODUCT
∗ Prohibition Do not discharge in the environment
∗ Disposal Small amounts of product do not interfere with water treatment facilities. If released in
sewage system, it is recommended to control the flow rate in order to avoid any
foaming excess. Big quantities should be treated as chemical waste according to local
regulations
PACKAGING
∗ Prohibition Do not discharge in the environment
* Cleaning Rinse with plenty of water
∗ Disposal Incineration or an agreed method for package recycling

14 TRANSPORT INFORMATION
INTERNATIONAL REGULATIONS
∗ Road - RID/ADR Non hazardous
∗ Sea - OMI/IMDG Non hazardous
∗ Air - ICAO/IATA Non hazardous

15 REGULATORY INFORMATION
LABELLING
CE regulations Not classified
∗ Hazard symbols /
∗ S phrases S20/21 : When using do not eat, drink or smoke

16 OTHER INFORMATIONS
Rules of drafting This Material Safety Data Sheet complies with ISO 11014-1. It is redacted in
accordance to European directive 2001/58/EC
Edition date 30/01/2003
Printing date 10/11/2005

You might also like