Hempadur XP 87550: Description
Hempadur XP 87550: Description
HEMPADUR XP 87550
87550: BASE 87559: CURING AGENT 98550
Description: HEMPADUR XP 87550 is an amine-adduct cured epoxy coating. It is hard, impact and abrasion
resistant with excellent temperature resistance and cathodic disbondment resistance. The product can
be applied by standard heavy duty airless spray equipment.
Recommended use: As a self-primed, high build coating primarily for protection of exterior of steel pipes in severely
corrosive environment, including burried pipelines in wet grounds.
For new constructions as well as a field-applied renovation and repair coating.
Can be applied to lines while in service at temperatures up to 90°C/194°F.
Service temperature: Maximum, dry exposure only: 130°C/266°F.
Wet (as external coating on hot pipes only): 110°C/230°F.
Availability: Subject to special agreement.
PHYSICAL CONSTANTS:
Shade nos/Colours: 59700 / Red.
Finish: glossy
Volume solids, %: 90 ± 1
Theoretical spreading rate: 1.5 m2/l [60.2 sq.ft./US gallon] - 600 micron/24 mils
Flash point: 14 °C [57.2 °F]
Specific gravity: 1.6 kg/litre [13 lbs/US gallon]
Dry to touch: 7 hour(s) 20°C/68°F
Fully cured: 7 day(s) 20°C/68°F
VOC content: 193 g/l [1.6 lbs/US gallon]
- The physical constants stated are nominal data according to the HEMPEL Group's approved formulas.
APPLICATION DETAILS:
Version; mixed product: 87550
Mixing ratio: BASE 87559: CURING AGENT 98550
4 : 1 By volume
Application method: Airless spray
Thinner (max.vol.): 08450 (2%)
Pot life: 1.5 hour(s) 20°C/68°F
Nozzle orifice: 0.023 - 0.025 "
Nozzle pressure: 250 [3625 psi]
(Airless spray data are indicative and subject to adjustment)
Cleaning of tools: HEMPEL'S TOOL CLEANER 99610
Indicated film thickness, dry: 600 micron [24 mils]
Indicated film thickness, wet: 675 micron [27 mils]
Recoat interval, min: According to specification.
Recoat interval, max: According to specification.
Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers,
consult HEMPEL Safety Data Sheets and follow all local or national safety regulations.
Recoating note: The indicated over coating interval will normally only apply in connection with touch-up of areas with too
low dry film thickness.
If the maximum over coating interval is exceeded, roughening of the surface is necessary to ensure
intercoat adhesion.
Nota: HEMPADUR XP 87550 For professional use only.
ISSUED BY: HEMPEL A/S 8755059700