Al-Jazeera Firedamp 263

Technical Data Sheet
JI-35003
AL-JAZEERA FIREDAMP 263 Solvent Based, High Solids, Acrylic Intumescent Fireproofing Coating
DESCRIPTION: APPLICATION METHOD AND THINNING:

"Al-Jazeera Firedamp 263" A high quality, solvent based, high THINNER:Normally not required, if required use up to 10% of
solid acrylic fireproofing coating by intumescent technology . "Al-Jazeera Thinner 507" according to the local VOC
regulations.
RECOMMENDED USE: Application
Method Airless Spray Brush/Roller**
As a fire proofing paint for structural steel works like beams, Thinning
columns and hollow sections for protection from cellulosic fires. (by volume)* (0) % 10%
CHARACTERISTICS: Nozzle Orifice (0.48-0.59)mm N/A
"Al-Jazeera Firedamp 263" has the following features:
•Tested and certified by (ECI) Exova Warringtonfire in Nozzle Pressure 246 bar (approx.3567 psi) N/A
accordance with BS 476:Part 21 1987.
•Fast drying & rapid recoatable, hence suitable for application Spray Angle 40-800 N/A
in the ready steel fabrication.
•Fire protection up to 2 hours for structural steel work like 'I' * Depends on the weather condition at work place.
section beams, columns and Circular & Rectangular hollow ** Suitable, for small areas only.
sections. Up to 400 microns (WFT) can be achieved in single coat.
•For exterior application, top coat is necessary. (Multiple coats may be required to achieve the specified
PHYSICAL CONSTANTS: thickness).
Notes:
Finish: Matt •Conventional spray is not recommended to apply this product.
Colour: Produces in white color. •Always mix the product thoroughly with a power agitator
Volume Solid: 75% ± 2 (ASTM D2697) before application.
Viscosity: 50 poise @ 31 oC (ASTM D562) "Al-Jazeera Firedamp 263" should be applied by trained
Specific Gravity: 1.37 @ 25oC (ASTM D1475) industrial paint applicators only
Theoretical 1 m2/ltr @ 750 µm DFT (40.1 ft2/US gal @
30 mils).Please refer to the current loading DRYING TIME AND RECOATING
Spreading Rate: tables or contact TSD. Drying times are generally related to air circulation, tempera-
VOC: 298 g/ltr tested. ture, film thickness and number of coats, and will be affected
SURFACE PREPARATION: correspondingly.
PRE-CLEANING: Temperature 25°C/77°F
Remove all visible surface deposits such as grease, oils and
Relative Humidity 50%
soils with suitable detergent. Remove salt and other contami-
nants by washing using high pressure fresh water. Where Surface Dry 30 minutes
necessary, work to remedy or alleviate design or fabrication Hard Dry 16 hours
defects such as weld spatter, and where required smooth
weld seams and sharp edges before abrasive blasting. Dry to recoat, minimum 4 hours
NEW STEEL: Dry to recoat, maximum* Extended
Refer to pre-cleaning, the surface must be prepared accord-
ing to Sa 2½ (NACE No.2/SSPC-SP 10) or Sa 2 (NACE No. Note: All records given in the table are typical at: recom-
3/SSPC-SP 6) . mended film thickness, good ventilation and one coat
APPLICATION CONDITION: system.
*The surface should be dry and clean prior to application.
The product should not be applied at temperatures below The best time to recoat is before previous coat is cured. If
5oC Surface temperature must be a minimum of 3oC above this time is exceeded, the surface may need to be
dew point. roughened slightly.
Relative humidity should not exceed 85%.
In confined areas good ventilation is required during applica- Limitations:
tion and drying. * Finish depends on the method of application. For aesthetic
look, surface must be prepared once again before applying
PAINT SYSTEM topcoat.
Primers: Self-priming, or can be use any suitable primers for * Al-Jazeera Firedamp 263 should be protected from water
more information, consult Al-Jazeera TSD. immersion or running water.
Topcoats: "Al-Jazeera Firedamp 275"
Disclaimer 2017
To the best of our knowledge the technical data listed herein is true and accurate up to publication date and is subject to change without prior notice. User must
contact Al-Jazeera Paints Company to verify of any modifications before specifying or ordering the product. Thus, information given in this sheet is not intended
to be exhaustive and any person using the product other than the recommendations in this sheet or without reverting to our Al-Jazeera TSD, he should take his
accountability in this connection.
Technical Data Sheet
JI-35003
AL-JAZEERA FIREDAMP 263
Solvent Based, High Solids, Acrylic Intumescent Fireproofing Coating
HANDLING AND SAFETY :

Clean up: Use "Al-Jazeera Thinner 507" for tools
cleaning and in case of spillage, absorb and
dispose.
Handling: Handle with care. Stir very well before use.
Health
and safety: Please read and follow the precautionary
notices displayed on the container, and all
caution statements on the MSDS of this
product. During application of paint, contact
of liquid paint with eyes, skin, inhalation of
paint mist and paint vapor should be strongly
avoided. For spray application systems;
applicator should wear protective clothing,
Ventilation: When used in enclosed areas, thorough

air circulation must be used during and after
application until the coating is cured. In
addition, respirators must be used by all
applicator.
Caution: This product contains flammable solvents,
keep away from sparks and open flame.
For information on LEL and TLV, please
read the MSDS.
Environmental
safety: Please donate the leftover paint and
packaging to your local authorized institution
for usage or recycling purpose.
Note: Wastes and empty containers should be
disposed of in accordance with local
regulations made under the Control of
P ollut ion A ct and t he E nv i ro n m e n ta l
Protection Act.
Packing :
Drum : 18 Ltr .
SHELF LIFE & Storage:

Shelf life : 24 months @ 25 °C.
Storage: The container should be kept in sealed, dry, cool, well
-ventilated place and stored in accordance with national regulations.
Disclaimer 2017
To the best of our knowledge the technical data listed herein is true and accurate up to publication date and is subject to change without prior notice. User must
contact Al-Jazeera Paints Company to verify of any modifications before specifying or ordering the product. Thus, information given in this sheet is not intended
to be exhaustive and any person using the product other than the recommendations in this sheet or without reverting to our Al-Jazeera TSD, he should take his
accountability in this connection.

Al-Jazeera Firedamp 263

Uploaded by

Copyright:

Available Formats

Al-Jazeera Firedamp 263

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Al-Jazeera Firedamp 263

Uploaded by

Copyright:

Available Formats

Technical Data Sheet

DESCRIPTION: APPLICATION METHOD AND THINNING:

HANDLING AND SAFETY :

Ventilation: When used in enclosed areas, thorough

SHELF LIFE & Storage:

You might also like