Manual Bell 220C
Manual Bell 220C
Manual Bell 220C
VIN :
PARTS MANUAL
Technical Documentation
BELL EQUIPMENT COMPANY
Richards Bay
IMPORTANT
Due to BELL’s policy of continuous product improvement, the information contained in this manual was correct
upto the time of printing (Issue date of manual). Any changes after this date will only be included in the next
update of this manual.
Illustrations in this manual are pictorial representations of the component and are not drawn to scale.
INTRODUCTION
This manual has been produced to assist you in ordering of parts for the maintenance of your BELL machine.
The information contained in the manual is in a logical sequence. Each illustrated breakdown is supported with
a parts list.
The parts manual has been produced by the Technical Documentation Department of BELL EQUIPMENT Co.
Every effort has been made to ensure that the information in this manual was correct at the time of publication.
BELL EQUIPMENT Co. has a policy of continuous product development, improvement and design. BELL
EQUIPMENT Co. reserves the right to change, amend and update the design of its product at any time without
prior notice. With this policy, changes may have occurred that are not included in this manual.
Whilst every endeavor has been made to provide accurate and reliable information, BELL EQUIPMENT Co.
specifically disclaims any actual or implied warranty and under no circumstances shall be liable for any loss,
damage or injury to person or property suffered, whether direct, or indirect or consequential, arising from the
use of this manual. In particular and without detracting from the above, the disclaimer also applies in the event
of any specification, warning, or representation contained in this manual being inadequate, inaccurate, or
unintentionally misleading.
The user is urged to strictly comply with the instructions and warnings that are given in the interests of general
safety. Please do not hesitate to contact your BELL Product Support Representative whenever you have a query
on you BELL product or this manual. The address of your nearest BELL branch or dealer is as follows:-
R.S.A.
RICHARDS BAY (HEAD OFFICE):
Carbonode Cell ☎ (0351)9079111 P.O. Box 198
Alton Fax : (0351) 974336 RICHARDS BAY
RICHARDS BAY Telex: 661011 3900
3900
BLOEMFONTEIN:
23 George Lubbe Street ☎ (051) 353900/1 P.O. Box 1878
Hamilton A/H : (051) 478888 BLOEMFONTEIN
BLOEMFONTEIN Radio Page 7255 (Parts) 9300
9300 Fax : (051) 353899
CAPE TOWN:
Milan St. ☎ (021) 3862252 P.O. Box 162
Airport Industria A/H : (021) 9811425 EPPINGDUST
CAPE TOWN Fax : (021) 3862260 7475
7525
EMPANGENI:
15 Brons Street ☎ (0351) 26106 P.O. Box 7332
EMPANGENI RAIL A/H : (0351) 923391 EMPANGENI RAIL
3910 Fax : (0351) 924342 3910
GEORGE:
Pioneer Road ☎ (0441) 8780930/1 P.O. Box 1697
Pacaltsdorp A/H : (0441) 741996 GEORGE
GEORGE Fax : (0441) 8780932 6530
6534
JOHANNESBURG (SALES):
Griffith Road ☎ (011) 928 9700 to 22 P.O. Box 25391
Jet Park Fax : (011) 928 9730 EAST RAND MALL
KEMPTON PARK BOKSBURG
1619 1462
KURUMAN:
8 Acacia Street ☎ (05373) 30698 P.O. Box 1396
KURUMAN Fax : (05373) 30697 KURUMAN
1619 8460
MIDDLEBURG:
9 Celcius Street ☎ (0132) 461169 P.O. Box 2821
Building B A/H : (0132) 29877 MIDDLEBURG
Industrial Area Fax : (0132)461229 1050
MIDDLEBURG
1050
NELSPRUIT:
3 Christie Crescent ☎ (01311) 552110 to 6 P.O. Box 1672
Vintonia 2 A/H : (01311) 551560 NELSPRUIT
NELSPRUIT Fax : (01311) 552117 1200
1200 Radio Page 8036 (Store)
Radio Page 8037 (W/Shop)
PIET RETIEF:
6A Retief Street ☎ (01343) 4110 P.O. Box 1221
PIET RETIEF ☎ (01343) 50916 VRYHEID
2380 ☎ (01343) 3467 3100
A/H (01343) 807029
A/H (01343) 3550
Fax : (01343) 4110
PIETERMARITZBURG:
7 Van Eck Place ☎ (0331) 69319 P.O. Box 100436
MKONDENI A/H : (0331) 964601 SCOTSVILLE
3201 Fax : (0331) 61837 3209
PONGOLA:
☎ (03841) 31720 P.O. Box 681
A/H : (03841) 31162 PONGOLA
Fax : (03841) 31735 3170
PORT ELIZABETH:
134 Patterson Road ☎ (041) 541721/2 P.O. Box 3443
NORTH END ☎ (041) 541794/5 NORTH END
6056 ☎ (041) 541732/9 6056
A/H : (041) 514526
Fax : (041) 542060
PORT SHEPSTONE:
Shop 5 Industrial Park ☎ (0391) 4124/5 P.O. Box 560
Cnr. Main Harding and A/H : (0391) 77821 PORT SHEPSTONE
Isotsha Road Fax : (0391) 815155 4240
PORT SHEPSTONE
4240
RUSTENBURG:
No. 16 Vanadium Street ☎ (0142) 961003/4/5 P.O. Box 3701
Border Industry A/H : (0142) 28364 RUSTENBURG
RUSTENBURG Fax : (0142) 961005 0300
0300 Radio Page 610 (Parts)
Radio Page 600 (W/Shop)
SPRINGBOK:
Drive Inn Road ☎ (0251) 23710 P.O. Box 618
Industrial Park ☎ (0251) 21124 SPRINGBOK
SPRINGBOK ☎ (0251) 21130 8240
8240 A/H (0251) 23344
A/H (0251) 22556
Fax : (0251) 81314
TZANEEN:
8 Impala Street ☎ (0152) 3071129 P.O. Box 2102
Industrial Sites ☎ (0152) 3071180 TZANEEN
TZANEEN ☎ (0152) 3074812 0850
0850 A/H (0152) 3074503
Fax : (0152) 3073095
UMHLALI:
Old Main Road ☎ (0322) 71637 P.O. Box 39
UMHLALI Fax : (0322) 71367 UMHLALI
4390 4390
VRYHEID:
Bloekom Street ☎ (0381) 5541/2 P.O. Box 1221
VRYHEID ☎ (0381) 5555 VRYHEID
3100 A/H (0381) 808112 3100
Fax : (0381) 809752
U.S.A.
GARDEN CITY (HEAD OFFICE):
2843 Hwy 80 ☎ (912) 966-2615
Garden City Fax : (912) 964-1594
GEORGIA
GA 31408
NEW ZEALAND
NEW ZEALAND (BELL EQUIPMENT (NZ) LTD):
19 Nikau Road ☎ (09) 276-2424 P.O. Box 22585
Otahuhu Fax : (09) 276-6379 Otahuhu
AUCKLAND AUCKLAND
AUSTRALIA
AUSTRALIA (BELL EQUIPMENT):
12 Granite Place ☎ (0961) 3561033 P.O. Box 34 SPC
Welshpool Fax : (0961) 3565229 Welshpool
WESTERN AUSTRALIA WESTERN AUSTRALIA
6106 6986
SOUTH AMERICA
ARGENTINA:
Avda Santa Fe 1838, 9 Piso ☎ 54 1 811-9630
C.P. 1123 Fax : 54 1 811-9630
Capital Federal
Buenos Aires
ARGENTINA
EUROPE
BELL FRANCE SARL:
Z.A. Rte d’ Argenton-sur-Creuse ☎ (09) 33 55 89 23 56
23800 Fax : (09) 33 55 89 23 24
Dun-Le-Palestel
FRANCE
SPAIN:
MYCSA ☎ (09) 34 594 1328
Sierra de Guadarram, 2-A Fax : (09) 34 6 594 1631
Apartado 225
28850
TORREJON DE ARDOZ (MADRID)
Spain
DEALER
Please supply your dealer details here:
USER’S COMMENT FORM
Should you , as user of this manual, have any suggestion for improving the manual, or you find any errors or
omissions, then we would like to know.
Please complete a facsimile of this form and hand it in to your nearest BELL Product Support Representive or
post it directly to your nearest BELL Branch. Addresses are given at the beginning of this manual.
MACHINE MODEL:
SERIAL NUMBER:
VIN:
PAGE NUMBER:
DID YOU FIND THE INFORMATION EASY TO READ AND UNDERSTAND ? YES NO
NAME:
COMPANY:
TITLE:
ADDRESS:
TELEPHONE NUMBER:
SECTION 2. ENGINE
SECTION 4. SYSTEMS
SECTION 1
GENERAL INFORMATION
870148 MAY 96
1-2 SECTION 1. GENERAL INFORMATION
870148 MAY 96
SECTION 1. GENERAL INFORMATION 1-3
BULLETINS
Record the relevant information from the Technical Documentation Bulletins, Service Bulletins and Parts Bul-
letins into this manual as follows:-
i. Ensure the manual number (87——) reflected in the bulletin is the same as the 87—— number at
the bottom right hand corner of this page.
INSERTED BY
BULLETIN NO. DATE RECEIVED
NAME SIGNATURE
870148 MAY 96
1-4 SECTION 1. GENERAL INFORMATION
INSERTED BY
BULLETIN NO. DATE RECEIVED
NAME SIGNATURE
870148 MAY 96
SECTION 1. GENERAL INFORMATION 1-5
LIST OF ABBREVIATIONS
870148 MAY 96
1-6 SECTION 1. GENERAL INFORMATION
PTO Power Take Off USGAL United States Gallon (3.7854 litre)
870148 MAY 96
SECTION 1. GENERAL INFORMATION 1-7
ORDERING OF PARTS
To facilitate the ordering of parts, the following information is required to determine the correct part for your
BELL product.
Any other information which will assist us in getting the parts to you with the least amount of trouble or delay
should be given. This information will be noted and filed for future reference.
870148 MAY 96
1-8 SECTION 1. GENERAL INFORMATION
870148 MAY 96
SECTION 1. GENERAL INFORMATION 1-9
6m
5m
4m
5 765 (18' 11")
3m
4 297 (14' 1")
2m
2 929 (9' 7")
460 (1' 6")
1m
607
(2')
(1' 11")
0 1m 2m
598
X000352
2 622 (8' 7")
3 910 (12' 10")
1 329 (4' 4")
Figure 1
870148 MAY 96
1-10 SECTION 1. GENERAL INFORMATION
6m
5m
4m
6 123 (20' 1")
3m
4 656 (15' 3")
2m
2 929 (9' 7")
460 (1' 6")
1m
607
(2')
0 1m 2m
1 224 (4')
Figure 2
870148 MAY 96
SECTION 1. GENERAL INFORMATION 1-11
HYDROSTATIC MACHINE
MACHINE BUILD No. SERIAL NUMBERS:
MACHINE MODEL
ENGINE MODEL
TRANSMISSION PUMP
AUXILLIARY PUMP
L/H WHEEL MOTOR SERIES
R/H WHEEL MOTOR SERIES
ATTACHMENT
MADE IN GERMANY
GV 11
Max. axial load 10000 kg
Manufactured 1995
Weight 56 kg
Indexator
S-922 21 Vindeln SWEDEN
BRUENINGHAUS HYDROMATIK
Brueninghaus Hydromatik GmbH
D-72160 Horb
A 10 V O 71 DFR1/31R-
PCS62N00 -SO 52
Ident-Nr. 00964563 Baujahr 09 95
Fabr-
3872234 MINERALOL
Nr Dreh-
Vg = 65cm3 n = 2200 min-1
DR = 170 bar FR = 14 bar LR = kW richtung
MADE IN GERMANY
Manufactured in U.S.A. for : Cert. I.D. C.I.D./ L. Series CPL Engine Serial Number.
i ns Cummins
u mm Engine Company, Inc Timing- TDC Injector P/N.
Box 3005
Columbus Indiana Valve lash cold Cust. Spec.
47202-3005
Warning:Injury May Result and Warrenty Is Voided Engine Serial Number. Rated HP at RPM
If Fuel Rate RPM or Altitudes Exceed
Published Maximum Values For This Model Low Idle RPM Fuel rate at rated HP mm3/stroke
and Application.
X000370
Figure 3
870148 MAY 96
1-12 SECTION 1. GENERAL INFORMATION
870148 MAY 96
SECTION 1. GENERAL INFORMATION 1-13
870148 MAY 96
1-14 SECTION 1. GENERAL INFORMATION
140017 1 SEAL
280016 1 LOCTITE
870148 MAY 96
SECTION 2
ENGINE
3 4
1
6
7
5
P003042
6
26
25
8
26
1
4 3
22 21
2
9
29 30
23 24
10 20
5
15
13 14
18
7
16 19
15
31 11,12
28
17
27
4 3
10
6
7
8
3
8
9
10
5 11
12
6 13
12
1
14
P002954
6 16
17
RH
14
3
AXLE HOUSING
5 1
13 13 13 9
LH POST
10
15
2 6
5
4
11
6 13 8
LH 13
LH RH
13
7
12
12
P002157
4
3
3
1
6 7
10
12
5
8
10
10
16 15
14
11 2
7 13
11
12
9
4
10
NOT ILLUSTRATED
4
12
111
2,3
5
13 P003043
6,7,8
13 4 22 4
7 22 22
28 27 34 32
33
31
31
10 24 8
18 11 29
37 35 15
28 36
27 26 26
23
27
27 TANK
19
44 28
28 12
27 1
28
38
45
29 40 28 46
19 28 21
9 11 14 20
41
2
28 26 27
27 6
TO CASE DRAIN FELLING HEAD
18 27 5 10
39 25 26
43 16 15
17
7 3 10 30
42
20
P002997
13 4 22 4
7 22 22
28 27 34 32
33
31
31
10 24 8
18 11 29
37 35 15
28 36
27 26 26
23
27
27 TANK
19
44 28
28 12
27 1
28
38
45
29 40 28 46
19 28 21
9 11 14 20
41
2
28 26 27
27 6
TO CASE DRAIN FELLING HEAD
18 27 5 10
39 25 26
43 16 15
17
7 3 10 30
42
20
P002997
13 4 22 4
7 22 22
28 27 34 32
33
31
31
10 24 8
18 11 29
47 37 35 15
28 36
27 26 26
23
27
27 TANK
19
44 28
28 12
27 1
28 38
45
47 40
29 28 46
19 28 21
9 11 14 20
41
2
28 26 27
27 6
TO CASE DRAIN FELLING HEAD
18 27 5 10
39 25 26
43 16 15
17
7 3 10 30
42
20
P002998
13 4 22 4
7 22 22
28 27 34 32
33
31
31
10 24 8
18 11 29
47 37 35 15
28 36
27 26 26
23
27
27 TANK
19
44 28
28 12
27 1
28 38
45
47 40
29 28 46
19 28 21
9 11 14 20
41
2
28 26 27
27 6
TO CASE DRAIN FELLING HEAD
18 27 5 10
39 25 26
43 16 15
17
7 3 10 30
42
20
P002998
17
10
11 14 1
12 13
11
16
4
8
9
7
6
18
6 3 15
5
1
2
4
3
P002958
24
1
10 22
7 20
19
4
6
3 25
21
12 9
15
5
14
12 11
13
16
18
P003001
17
15
17
P002968
13
P002960
1
18
19
16
12
20
21
22
25
23
2 24
4
23
14
15
14
8 22
9
3
11
10
26
5
7 13
P 002957
210672 3-33
ROTARY GROUP
ITEM PART NUMBER QTY DESCRIPTION REMARKS
1 NSI (See Remarks) 1 ROTARY GROUP Not Supplied as a complete assembly
2 223521 9 PAD, Piston Slipper
3 223607 1 STACK, Cup Spring
4 223608 1 CRADLE
5 223609 1 RING, Slide
6 223610 1 SHAFT, Drive
7 223615 1 BEARING, Liner (Pair)
8 223009 1 WIRE
9 223277 A/R SHIM
9 223278 A/R SHIM
9 223279 A/R SHIM
9 223280 A/R SHIM
10 223613 1 PLATE, Retaining
11 223614 1 BALL, Retaining
12 223283 1 BEARING, Roller
13 223618 1 CRADLE BEARING ASSY(Set)
14 223619 1 RING, Retaining
15 223620 1 SEAL, Shaft
16 223285 1 RING, Retaining
17 223621 1 RING, Retaining
18 223603 1 HOUSING
19 223026 2 PIN, Double Break Off
20 223189 1 SCREW, Eccentric
21 223190 1 NUT, Seat, locking
22 223644 1 CYLINDER WITH CONTROL PLATE
23 223616 2 WASHER
24 223617 1 SPRING
25 223621 1 RING, Retaining
26 223612 1 WIRE
210672 3-34
INTERNAL GEAR PUMP ASSEMBLY
14
13
4
10
7
5
8 9
11 12
P003010
10
9
1,2
6
8
3
6
23
16 7
15
12
5
14
15
4
16
24 6
17
11
13
6
18
21 7
16 14 20 22
15 15 19
16
12 17
39 38
40
1 6
3 28
2
24 23
11 25
10 26
22
9
7 8
5 13 21
4 19
18 20
12
35 27
29
34
15
17
15 16 37
14
36
33
31
41 32 50 42 51 43 44 45 46 47 48
30
29
P002963
49 52
39 38
40
1 6
3 28
2
24 23
11 25
10 26
22
9
7 8
5 13 21
4 19
18 20
12
35 27
29
34
15
17
15 16 37
14
36
33
31
41 32 50 42 51 43 44 45 46 47 48
30
29
P002963
49 52
39 38
40
1 6
3 28
2
24 23
11 25
10 26
22
9
7 8
5 13 21
4 19
18 20
12
35 27
29
34
15
17
15 16 37
14
36
33
31
41 32 50 42 51 43 44 45 46 47 48
30
29
P002962
49
39 38
40
1 6
3 28
2
24 23
11 25
10 26
22
9
7 8
5 13 21
4 19
18 20
12
35 27
29
34
15
17
15 16 37
14
36
33
31
41 32 50 42 51 43 44 45 46 47 48
30
29
P002962
49
13
26 3
14
2
15
4 16
5
18
6 17
26
27
9 7
19
21
8
11
20
10
22
12
23
24
25
7
3 4
1 5 6
8 9
11
10
16
17 12
13 21
22
14
23
14
15
18
19
20
P002405
14 2
1
13
12
11
10
9 3
1 5
16
7
4
15
14
8
10
17 2
11
9
12
13
1 2
3
4
10
12
9,11
6,7
4
P003044
2 13
6
10
5
7
3 11
14
12
15 TO TANK
4 16
P002178
2 13
6
10
5
7
3 11
14
12
15 TO TANK
4 16
P003058
3 4 7
4 6
4
5 10
8
1
ORANGE
9 10 11
GREY
PURPLE 10
BROWN
YELLOW
3 4
2
6
4
4
5
P002292
GREEN
RED
2
9
3 4
6 1
4
5 9
BROWN
BLUE
P002314
8
13
2 3
12
9 5 15
6
7 1
11
8
14
3
6 10 4
16 15
18
17 16 15
P002437
8
13
2 3
12
9 5 15
6
7 1
11
8
14
3
6 10 4
P002437
3 3
1
1
8 9
4 4
6
13 5
15 11
9
14 16 12
10
P003002
April 2, 1996 3WHLC052 4-19
HYDRAULIC FILTER ASSEMBLY
ITEM PART NUMBER QTY DESCRIPTION REMARKS
1 202914 2 FILTER ELEMENT
2 4 NUT
3 190712 2 CAP
4 210341 2 STRAINER
5 240243 1 HOSE
6 240453 1 HOSE
7 120241 1 CONNECTOR
8 120242 1 CONNECTOR
9 160941 1 FITTING
10 140119 1 O RING
11 160942 1 FITTING
12 200945 1 O RING
13 120311 1 BULKHEAD
14 140378 1 O RING
15 120298 1 BULKHEAD
16 140378 1 O RING
2 3 2 1 2 3 2
4
2
P003003
5 8 11 12 6 7 6 5 4
10
9 2
P003004
11
1
5
8 17
20 21
4 19
3 12 16
40
23
7
6 15
33
24
2
27 14 39
22 38
27
23
32 18
27
25
37
9
35
36
10
13
19 34
26
28 20
29 31 P002951
30
11
1
5
8 17
20 21
4 19
3 12 16
40
23
7
6 15
33
24
2
27 14 39
22 38
27
23
32 18
27
25
37
9
35
36
10
13
19 34
26
28 20
29 31 P002951
30
3
15
2 4
14 13
26
5
27
28
6 7 8
16 16
9 36
17 30 29
31
11
35 32
38 33 34
10 11
12
39
39
18
19
18 37
20, 21, 22, 23
24
25
P003758
3
15
2 4
14 13
26
5
27
28
6 7 8
16 16
9 36
17 30 29
31
11
35 32
38 33 34
10 11
12
39
39
18
19
18 37
20, 21, 22, 23
24
25
P003758
P003045
P002985
CB
0
1
MANUAL RESET THERMAL CIRCUIT BREAKER (PRESS TO RESET /PULL TO SWITCH OFF)
CB
MANUAL RESET THERMAL CIRCUIT BREAKER (PRESS TO RESET)
KEY SYMBOL INDICATING THE IGNITION SWITCH(THIS IS ALWAYS SHOWN
ALONG WITH SCEMATIC SYMBOL FOR THE TYPE OF SWITCH USED)
IGNITION SWITCH
P002986
NORMALLY OPEN PRESSURE ACTUATED SWITCH WITH DUAL CONNECTORS G COMBINATION PRESSURE ACTUATED SENDER AND SWITCH(N/C) WITH INPUT
P
(SWITCH CONTACTS ARE OPEN WHEN THERE IS NO APPLIED PRESSURE CONNECTORS AND COMMON CHASSIS EARTH(BODY OF THE SWITCH/SENDER
E.G : BRAKE LIGHT SWITCH) ACTS AS THE EARTH WIRE."G" INDICATES THE SENDER CONNECTION;"W" OR
P "WK" INDICATES THE SWITCH CONNECTION.N.B : NEVER CONNECT +12/24 DIRECTLY
W TO THESE TERMINALS AS THIS WILL DESTROY THE RESISTOR AND SWITCH CONTACT)
EG: OIL PRESSURE SENDER.
CHANGE OVER PRESSURE ACTUATED SWITCH WITH THREE TERMINAL CONNECTIONS PRESSURE SENDER WITH SINGLE TERMINAL AND CHASSIS EARTH.
P I.E :COMMON "C" ; NORMALLY OPEN(CONTACTS OPEN WHEN NO PRESSURE)"N/O" ; P
NORMALLY CLOSED (CONTACTS CLOSED WHEN NO PRESSURE) "N/C".
P002987
+ +
TEMPERATURE GAUGE 40 TO 120 DEGREES CELCIUS."+"= 12/24 VOLT IN;"-"= EARTH
40 120 S ;"S"= SIGNAL TO SENDER UNIT- NEVER CONNECT 12/24 VOLTS DIRECTLY TO THE S ELECTRONIC TACHOMETER. ."+"= 12/24 VOLT IN;"-"= EARTH
"S" TERMINAL. ;"S"= SIGNAL FROM ALTERNATOR "W" TERMINAL .
_ _
C RPM
+ +
50 150 S TEMPERATURE GAUGE 50 TO 150 DEGREES CELCIUS."+"= 12/24 VOLT IN;"-"= EARTH S FUEL GAUGE.."+"= 12/24 VOLT IN;"-"= EARTH
;"S"= SIGNAL TO SENDER UNIT- NEVER CONNECT 12/24 VOLTS DIRECTLY TO THE
;"S"= SIGNAL TO SENDER UNIT- NEVER CONNECT 12/24 VOLTS DIRECTLY TO THE
_ "S" TERMINAL.
_ "S" TERMINAL.
C
+ +
TEMPERATURE GAUGE 60 TO 200 DEGREES CELCIUS."+"= 12/24 VOLT IN;"-"= EARTH
60 200 S
;"S"= SIGNAL TO SENDER UNIT- NEVER CONNECT 12/24 VOLTS DIRECTLY TO THE
HOURMETER "+"= 12/24 VOLT IN FROM ALTERNATOR "D+" TERMINAL;"-"= EARTH
_ "S" TERMINAL. _
C
+
PRESSURE GAUGE 0 TO 10 KILOPASCAL ."+"= 12/24 VOLT IN;"-"= EARTH
S ;"S"= SIGNAL TO SENDER UNIT- NEVER CONNECT 12/24 VOLTS DIRECTLY TO THE
"S" TERMINAL.
_ 10
KPA
+
PRESSURE GAUGE 0 TO 5 KILOPASCAL ."+"= 12/24 VOLT IN;"-"= EARTH
S ;"S"= SIGNAL TO SENDER UNIT- NEVER CONNECT 12/24 VOLTS DIRECTLY TO THE
_ "S" TERMINAL.
5
KPA
P002988
1
2
3 BIPOLAR TRANSISTOR (NPN)
4 ELECTRONIC MODULE (E- MODULE ) WITH 7 WAY CONNECTOR.
5
6
7
F
ELECTRONIC FLASHER UNIT WITH 2 CONNECTORS.
+
POLAR CAPACITOR(USUALLY OF THE ELECTRLYTIC TYPE WHERE "+" OR "-"
TERMINAL IS INDICATED ON THE PRINTING OF THE CAN.)
ZENER DIODE
TRANSZORB DIODE
P002989
1
BODY MOUNT HEAVY DUTY SOLENOID .RATED FOR INTERMITTANT DUTY .
HYDRAULIC SOLENOID VALVE WITH TWO CONNECTORS INT EG : STARTER SOLENOID TRACKED SLEW BOOM.
2
BODY MOUNT HEAVY DUTY SOLENOID .RATED FOR CONTINUOS DUTY .
CONT EG : IGNITION SOLENOID- TRACKED SLEW BOOM.
87a
30 87
CHANGEOVER RELAY."85"& "86" ARE THESOLENOID CONNECTIONS OF
THE RELAY."30" IS COMMON & "87" ,"87a" ARE N/O AND N/C RESPECTIVLY.
85 86
P002990
RD/BL 1.6 WIRE WITH COLOUR AND SIZE ABBREVIATION (IN THIS CASE RED WITH
A BLUE TRACER STRIPE AND A SIZE OF 1.6 mm) COMPONENT OUTLINE .ANYTHING INSIDE THIS IS INSIDE THE COMPONENT.
A
ARROW :WIRE GOES TO ANOTHER PAGE(SHEET 2) TO THE CORRESPONDING
HAZARD 1 2
NUMBER / LETTER AND FLIGHTS.
THREE CONTACTS FROM A MULTIWAY CONNECTOR WITH MORE THAN TREE CONTACTS
B
FLIGHTS :WIRE COMING FROM ANOTHER PAGE(SHEET 1) FROM AN ARROW SHOWING TERMINAL NUMBERING IF PRESENT. "P1" ISTHE PLUG /CONNECTOR NUMBER
HAZARD . 1 1
WITH THE CORRESPONDING NUMBER/ LETTER AND CAN BE FOUND ON THE LIST OF PLUGS PROVIDED WITH THE SCHEMATIC DIAGRAMS
C
SHEET NUMBER -IE: A COMPLETE MACHINE SCHEMATIC WILL CONSIST OF A
NUMBER OF SEPARATE A4 PAGES .THEY COLLECTIVELY HAVE A 700 NUMBER
1 eg:700190/1 WHERE THE" /1" IS THE PAGE OR SHEET NUMBER.THIS CAN BE
FOUND IN THE LOWER RIGHT CORNER OF THE DRAWING WHEN IT IS HELD P4
IN THE " LANDSCAPE " POSITION .
COMPLETE SINGLE WAY CONNECTOR NUMBER "4".
MALE CONTACT
P002991
M
ELECTRIC PUMP (EG. WINDSCREEN WASHER PUMP)
12 VOLT BATTERY (TWO OF THESE CONNECTED IN SERIES = 24 VOLT )
D+ W
B+ A
ALTERNATOR UNIT
ALTERNATOR
STARTER MOTOR /CRANKING MOTOR SHOWING THE SOLENOID CONTACTOR BLACK =BK
M
BLUE=BL
BROWN=BN
STARTER GREEN=GN
GREY=GY
ORANGE=OR
PINK=PK
M PURPLE=PL
FAN / BLOWER MOTOR OR UNIT
RED=RD
WHITE=WH
FAN/BLOWER YELLOW=YL
1 + +
M
P SINGLE SPEED WINDSCREEN WIPER MOTOR WITH PARK FUNCTION
_
1
M +
g
TWO SPEED WINDSCREEN WIPER MOTOR WITH PARK FUNCTION
P
_
P002992
CONT
IGNITION SWITCH
BK/WH 2.5
YL 1.6 B 5 WIPER MOTOR & WASHER PUMP
GN 10
30
85
GN 2.5 7 COLD START & HORN
3
BATTERY 12V
13
INJECTOR PUMP
12 1
87a
86
87
STARTER
SOLENOID
BUTTON
GN/RD 1.6
0
8 2
GN 2.5
BATTERY ISOLATOR
5
1
PARK BRAKE
BK/WH 2.5 0 1 YL/RD1.6 1 2 TO CHARGE LIGHT & HOUR METER
SWITCH
SWITCH
1 0
P01
GY/RD 1.6 2
BK/WH 2.5
3 TO TACHOMETER
5
GN 2.5
E2
E1
11
BK 2.5
10
9 1
PARK BRAKE
14,15
SOLENOID
D+ W
B+ A
M
P01
2
GN 2.5
STARTER MOTOR 1
ALTERNATOR
P002980
4
3
LEVEL
SWITCH
COOLANT
SWITCH
P
P
AIR FILTER
8
HYDRAULIC BYPASS
ENGINE OIL PRESSURE SWITCH
P02
BL/WH 1.6
OR 1.6
PL/BL 1.6
BK/BL 1.6
BN/BL 1.6
85 86
87
WH/BL 1.6 30
LARGE RED
87a
2
WARNING LIGHT
3,4
87a
PK 1.6
PK 1.6
87 30
2
86 85
CAUTION
3WHLC041
BYPASS COOLANT
LEVEL
PK/BK 1.6 WH/BL 1.6 COOLANT LEVEL
PK/BK 1.6
ALTERNATOR
CHARGE
EARTH
- BUZZER
+ BUZZER
IGN POS
1
BK 1.6
BK 1.6
RD 1.6
RD 1.6
RD 1.6
5,6
YL/RD1.6
GN/BK1.6
YL/RD 1.6
PK/BK 1.6
PK/BK 1.6
BK/RD 1.6
E2
BEEPER
7
6
1
7
CB 6
1
E
P002981
2
1
4-71
WARNING LIGHT CIRCUIT
ITEM PART NUMBER QTY DESCRIPTION REMARKS
1 203810 1 INTERFACE UNIT
2 201085 2 RELAY, Change Over, 12V
3 200364 1 LAMP, Tail Stop
4 200412 1 BULB, 12V 20.5W
5 201695 6 INDICATOR, Warning Light
6 NSI 6 BULB
7 203571 1 BUZZER, Warning, 12.24V
8 202485 1 SWITCH, Cooling Water Level
4 3 5
LIGHT CIRCUIT
ENGINE TEMP W/L
RD 1.6 RD 1.6 CB 6 F 1
HYDRAULIC OIL ENGINE COOLANT
7 TEMPERATURE TEMPERATURE
6
+
150 + 120
50 S 40 S
_ _
C C
BK 1.6
BK 1.6
+
S
_ 5
BK 1.6 KPA 5
ENGINE OIL
RD 1.6 PRESSURE / VOLTAGE E2
+
CLUSTER
10 18 S
RD 1.6 _
V
RD/WH 1.6
BN/WH 1.6
PL/WH 1.6
BN/BL 1.6
PL/BL 1.6
RD 1.6
BL 1.6
KL31
_
4
KL15
1 2 3 KLW + TACHOURMETER
S
KL51
_
G
G
W
RPM
P
t
BK 1.6
3
P002976
86 85
WH/BK 1.6 RD 1.6
1
LIGHTING OPTION CIRCUIT
E4
2,3
RIGHT HAND SIDE LIGHTS
& DASH LIGHTS RELAY
RIGHT HAND SIDE LIGHTS 87a
87 30
WH 2.5 WH 2.5 P03 WH 2.5
BL 2.5 86 85
RD 1.6
1
BK 2.5 BK 2.5
2,3
E3
3WHLC043
INSTRUMENT
AND SWITCH LIGHTS
BK 1.6
WH/BK 1.6
BL 1.6
BL 1.6
BL 1.6
BL 1.6
BL 1.6
BL 1.6
BL 1.6
BL 1.6
BL 1.6
E2
BK 1.6
FROM CB5
FROM CB7
1 0
LIGHT SWITCH
BK 1.6
4,5
4
5
D
G
3
1
1
P002979
4-75
LIGHTING OPTION CIRCUIT
ITEM PART NUMBER QTY DESCRIPTION REMARKS
1 201085 2 RELAY,Change Over
2 200222 5 BEAM, Sealed
3 200221 5 LAMP, Housing
4 202408 1 SWITCH, 2 Position
5 202415 1 LENS, Headlight Switch
RD/WH 2.5
2 1 BLOWER FAN
0 1 2 SWITCH
(NOT USED
WITH AIRCON)
8 6 3
3
RD/BK
BL/RD
1
NOTE !
AIRCON COMPRESSOR
E2
GY 2.5
0
7
1
4
5 YL 1.6
M
WIPER MOTOR
GY 2.5
WASHER SWITCH
M
0
WASHER PUMP 6
1
+
_
YL 1.6 B 1
P04 YL 1.6
P04 BK 1.6
WIPER SWITCH
5
P002974
RD 4.0 RD 4.0 I 1
BLOWER
SWITCH
2 1
0 1 2
1 8 6 3
BLOWER FAN
2
M
NOTE !
MACHINES HAVE EITHER AIRCONDITIONERS OR BLOWER FANS
BL/RD 2.5 BUT NOT BOTH.
RD/BK 2.5
E2
0
5
1
4
3
YL 1.6
M
WASHER SWITCH
WIPER MOTOR
GY 2.5
M
0
WASHER PUMP 6
1
+
_
YL 1.6 B 1
P04 YL 1.6
WIPER SWITCH
P04 BK 1.6
5a
P002975
85 86
WH/BL 1.6
BK 1.6
5 LEFT JOYSTICK
SWITCH
SAW OPEN 1
RELAY 0
87a 2
30 87
WH/GN 1.6 RD 1.6
85 86
WH/GN 1.6
RD 1.6
RD 1.6
RD 1.6
0
SAW/ SHEAR
SWITCH RIGHT JOYSTICK
BK 1.6
1
SKID-LINK SWITCH
RELAY 1
0
87a 2
30 87
BL/WH 1.6 4
BL/WH 1.6
3
85 86 BL/WH 1.6
P05
P05
P05
1 2
SKID VALVE SOLENOID
1
SOLENOID
SAW / CUT
2
BK 1.6
P05
P05
P05
BK 1.6
BK 1.6 BK 1.6 E2
6
P002978
0
3
1
1
87a
87 GN 1.6
30
86
85
YL/RD 1.6
GN 1.6
BK 1.6
RD 1.6
E2 ALTERNATOR D+ 6 2
HORN BUTTON
0
COLD START
1
1
VALVE 5
RD 1.6 CB 4 H 1
4 GN/BK 1.6
2
H
HORN
7
P002977
P01 2 WAY PLASTIC CONNECTOR -MAIN HARNESS TO PARK BRAKE SOLENOID P04 4 WAY PLASTIC CONNECTOR -DISTRIBUTION HARNESS TO WIPER
NOTE : PIN / SOCKET NUMBERING IS NOT RELATED TO POSITION MOTOR .(INSIDE CAB ).
ON THE CONNECTOR. WIRE COLOUR IS CLEARLY VISIBLE ON THIS NOTE : PIN / SOCKET NUMBERING IS NOT RELATED TO POSITION
TYPE OF CONNECTOR. ON THE CONNECTOR. WIRE COLOUR IS CLEARLY VISIBLE ON THIS
TYPE OF CONNECTOR.
PIN/SOCKET
?
WIRE WIRE ?
WIRE WIRE
1 1 GREEN 2.5 12V POSITIVE FROM START RELAY "87" SWITCHED
SOLENOIDS
? NOTE : PIN / SOCKET NUMBERING IS NOT RELATED TO POSITION
WIRE WIRE ON THE CONNECTOR. WIRE COLOUR IS CLEARLY VISIBLE ON THIS
TYPE OF CONNECTOR.
1 2 RED 1.6 12V SUPPLY FROM CB 6
2 2 BL/WH 1.6 SIGNAL TO LOW COOLANT RELAY"85" *
3 2 BK 1.6 EARTH
PIN/SOCKET
P03
NOTE : PIN / SOCKET NUMBERING IS NOT RELATED TO POSITION
P02/AB
ON THE CONNECTOR. WIRE COLOUR IS CLEARLY VISIBLE ON THIS
TYPE OF CONNECTOR. ?
WIRE WIRE
8
P002984
E1
ENGINE TO CHASSIS
EARTH STRAP
E2
MAIN CHASSIS EART
P002983
6,7
2
3,4 OFF ON
PRE HEAT
BRAKE OFF
5 28
8 IGNITION
START
9 Cels Cels
60 100 60 100
BRAKE ON 14
12 40 120 40 120
HORN
9
13
VDO VDO
9 HYD OIL TEMP WATER TEMPERATURE
ENG OIL PRESS
16 17,18
0 10
9
19,20
0 18 FAN LIGHTS
10 15
BATTERY 21,22
1/min x 100
9 15
27 10 20 23,24
WASHER WIPER
9
5 25
1
9
0 30
VDO
9 25,26
SHEAR
TACHOURMETER
SAW
11
P002143
13
4
16
2 12 15
8 14
11
10
19
17
20
6
7
21
5
18
1
9,10,11,12 1
13
7
15,16
14
P003046
27 44 44 26 21,22
49
27 44 44 26 21,22
49
27 44 44 26 21,22
49
5
15
16
13
16
13 9 12 1
6
13
14
8
11
2 10
13
14
13
3
26 15
1 16
20
8
21 18
17
2
19
20 3
21
23
20
24
21
5 4 9
7
6
24
23
12
13
14
21
22
10
25
21
11
46 45
43
44
46 45
43
44
32
31
34
33
38
39
30
35
6
P004592
36
37
32
31
34
33
38
39
30
35
6
P004592
36
37
24
15
14 21 5
7
16
21
24
13 5
1
24
10 22
15 13
14
20
16
12 16
4 9
19
11 2
8
17
18
12 P002133
4
11
23
21 21
20
20 11
21
3
2
1
5
7 4 3 7
8,9,10,11,12,13
NOT ILLUSTRATED
6
2
P002701
7
8
10
11
12
14
1
4 13
9 P002229
8
5
11
7 1
2 6
12
10
9
P002231
10
ULTRA C TELE LOGGER 1. Engine oil: check level. Do not overfill. (Refer to OMM,
Recommended Lubricants).
2. Engine Air-filter: renew elements only when indicated. Check
for leaks and damage connections. FUEL WATER
BOOM PIVOTS
10 SMR
ENGINE OIL
10 SMR
ENGINE FUEL
FILTER 1 000 SMR
3. Engine Cooling System: Check for dirt build-up on cylinder TRAP 10 SMR
fins.
Check fan belt condition.
4. Lubricate grease points. ENGINE OIL
5. Tyres: Check inflation pressure. Drive wheels; 103-138 kPa FILTER 250 SMR
(15-20 PSI). Tail wheel; 138-172 kPa (20-25 PSI).
6. Fuel Water Trap: Remove water.
7. Hydraulic Fluid: Check level.
3 8. General: Check for loose or broken parts, damaged seatbelt or FUEL FILTER ENGINE OIL
SERVICE 250 SMR operator protection. Check instrument operation, loose 1 000 SMR 250 SMR
wheelnuts, engine oil leaks, alternator drive belt and battery GREASE POINT LIFT CYLINDER
condition. ENGINE VALVE 50 SMR 10 SMR
8 9. Control and Brakes: Check operation, adjust as needed.
10. Cutting Head Maintenance: Fill bar lube. Check condition of bar
1 000 SMR
BOOM PIVOTS
ENGINE COOLING 10 SMR
and chain. SYSTEM 10 SMR
BATTERY
GREASE POINT
EVERY 250 SMR HYDRAULIC 50 SMR
OIL 1 000 SMR
1. Drain Engine Oil hot and renew oil filter.
2. Renew secondary oil filter.
LOCATED BELOW FLOOR PANEL 3.
4.
Check wheel drive motor for leaks and security.
Check auxiliary pump for leaks and security.
TAILWHEEL
BEARINGS
INSPECT SECURING BOLTS AND 5.
6.
Check treadle rod adjustment.
Renew main pump supply filter.
2 000 SMR
4
THROTTLE
1
7
5
FORWARD - IDLE IMPORTANT
HYDRAULIC
BACK - MAXIMUM
REV/MIN
LUBE POINT OIL P/N 201586
ONE SHOT OF
GREASE EVERY
10 SMR SERVICE 10 SMR
FUEL FILTER
9
DRAIN WATER
6 CHANGE FUEL FILTER AT A
P/N 201587
P003041
7
WARNING 8 MOVEMENT OF THE MACHINE Part No. 203073
IMPORTANT
P/N 203084
WARNING
P/N 203075
AIR CLEANER ENGINE
RESTRICTION PREHEAT
READY
4
1 BATTERY ACID CAUSES SEVERE BURNS
SHOULD ACID CONTACT SKIN OR CLOTHING, FLUSH WELL WITH WATER HYDRAULIC HIGH ENGINE
CHARGE OIL TEMP.
WEAR GOGGLES. SHOULD ACID CONTACT EYES, FLUSH WITH WATER FILTER BY-PASS
AND SEEK MEDICAL ATTENTION
BATTERIES MAKE EXPLOSIVE GAS RETURN 11
FILTER
KEEP ARCS, NAKED FLAMES AND SPARKS AWAY
P/N 203077
BY-PASS
3
204284 P002155