Garment Specification Sheet
Garment Specification Sheet
Garment Specification Sheet
Submitted by:-
Merchandise group:- Men’s Sleeve less Jacket Selling period:- Spring summer 2010
Body type:- Teen and Adult men’s Size range:- M,L,XL Sample size- M(100cms)
Fabrics:- Shell fabric- blended polyester fabric , Lining fabric:- Quilted nylon fabric , nylon pocket fabric
Special instructions :-
PRODUCT OVERVIEW
FRONT BACK
FRONT
1 Full-Length 25”
2 Shoulder length 17 ½ “
4 Armhole round 24 ¾”
6. Neck round 19 ½ “
7 Side seam 15 ¼”
MEAUREMENT DETAILS OF THE SIZE SET
S.NO PARAMETER DIMENSION (INCHES)
MEAUREMENT
BACK DETAILS OF THE SIZE SET
1 Centre Back Length 30”
S.NO PARAMETER DIMENSION (INCHES)
2 Yoke length 16 ¼ “
Lining
The lining fabric is a readily available quilted fabric. The lining patterns do not consist of the shoulder pieces present in the front and back
panels of the shell fabric.
Facing
Inside the fronts there is a facing of body fabric attached in front inside which has dimension as follow:
1 20 ½”
Length along C.F
2 2”
Width at hem
3 1”
Width at shoulder
Yoke on back Lining
A yoke in shape of a patch is present along the neckline attached to the back body lining fabric on which the size/company label is stitched.
The dimensions of the yoke are as follows:-
2 Length at bottom 5 ¾”
4 Width at shoulders 1”
POCKETS
CHEST POCKET
There is a single lip opening patch pocket on the left front at the chest level. The pocket is located at 3
inches down along the zipper and 2 inches across on the left front panel. The zip sliders have woven fabric
loopers attached
1 Length 6”
2 Width 5”
1 Length 8 ½”
2 Width 7 5/8”
3 Flap width 2 ¾”
1 Length 7 ½”
2 Width 7 3/8 “
ZIPPERS
Front closure zipper:- There shall be a nylon, non-reflective non-freeze 1-way zipper from the bottom of the jacket to
the top edge of the collar.
Pocket zippers – Pocket zippers are to be of nylon, non reflective short closed end zippers as per pocket lip sizes
required.
HANGER LOOP
A hanger loop is to be attached at the centre front between the collar and the back lining . The material to be used for the the loop can be
of the fabric used in the outer fabric.
VELCRO
Three Velcros , two in front lower pockets and 1 in the inner patch pocket with waist band in back side with loop. Velcro dimensions are as
follows:
1 Length 1 ½”
2 Width 1”
Garment Label Information Style Number:- JacSty112
Label /Ticket information
Brand Label
Type :- Embossed on rubber/Rexene Size – 2 3/8” X 3 3/8” Location:- on back patch
yoke(lining)
Size Label
Type :- Embossed on rubber/Rexene Size – 1 X 1 ¼” Location:- on back patch yoke(lining)
Wording:-
Wording:-
Preparation of Single lip + zipper attachment (chest pocket) 9 301 SNLS SSs,SSc
Cover + lower pocket attachment to front (left and right) 9 301 SNLS LSd
Overall appearance:- Appealing and salable to young and teenage men LSa
Facing + back patch & label attachment to lining 8 301 SNLS
Finishing armhole
9,9 301,301(DN) SNLS+DNLS