Aco 8
Aco 8
Aco 8
t
CODE PART NAME REMARKS
ACO-00-024 aco-8as Cleveland open Cup Flash Point Tester, asphalt version
STANDARD ACCESSORIES
t
CODE PART NAME Qty REMARKS
ACO-02-001 Test Cup Assembly 1
OPTIONAL ACCESSORIES
The flash detector rings and the temperature sensor are permanently mounted on a swing-arm assembly, TYPE All –in one, microprocessor controlled
which allows an easy setting of the specimen
TEST STANDARDS ISO 2592, ASTM D92, IP36
EASY OPERATION
MEASURING RANGE Ambient to 400℃
Select a test mode and enter the expected flash point; while the instrument executes the test, you are free to
ISO CRM, ISO Normal, ISO SPE, ISO Flash & Fire, ISO Skim*,
do other lab work. The instrument follows the exact procedures prescribed in the test method, and the
MEASUREMENT MODES ASTM Normal, ASTM SPE, ASTM Flash & Fire, ASTM Skim*,
completion of the test cycle is signaled by beeps. The test result is brightly shown on the color LCD module.
and User custom *: asphalt version only
AUTO FIRE POINT DETECTION
HEATER Nichrome Coil heater: 800W@100V or 800W@220V
In addition to the flash point, fire point can be determined automatically. The fire point is detected when the
COOLING DEVICE Forced air cooling by sirocco fan
double Ionization rings detects 5 sec of continuous burning.
DISPLAY 5.7 inch (117 x 88mm) color LCD with LED back light
AUTO FIRE CONTAINMENT
Teflon Paddle rotates to skim the surface film off specimen.
The fire containment lid activates automatically to help putting out fire when aco-8 detects a fire point or SKIMMING MECHANISM
Skimming start temperature and interval are programmable. When not in use,
specimen is burning up heavily. (asphalt version only)
the paddle can be removed.
SKIMMER FOR SURFACE SKIN (Asphalt Version Only) POWER CONSUMPTION 1000W MAX.
For aco-8 asphalt version, a unique skimmer was added to ELECTRICITY CONSUMPTION 160Wh for 1 test (about 20 min), 60.48gCO2 (@ 0.378kgCO2/1kWh)