Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

ESI-Case-Study-Enagas-PLM-Pipeline Trainer

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

Cas Case Study – Enagas S.A.

builds multi-platform
simulation system based on PipelineManager™

Challenge
Enagas S.A is the leading Natural Gas Transportation Company in Spain.

The company's main mission is to ensure competition and security of the Spanish Gas
System. It has around 10,000 km of gas pipelines throughout the Spanish territory,
three underground storage facilities and four regasification plants. Enagas terminals in
Spain total2.6465 million cubic meters of LNG storage capacity and the system has an
output capacity of 6,250,000 Nm ³ / h. (Fig. 1)

Enagas required a multi-platform simulation system for training purposes that could
provide their operations personnel with the ability to simulate realistic scenarios for
routine training and provide regular performance evaluation metrics for the pipeline
controllers and new apprentices. The simulation system needed to allow Enagas to
simulate normal and abnormal operation of the pipeline based on a detailed model of
the actual pipeline network. The scenarios had to be submitted to the pipeline
operators as a mirror image of the actual SCADA system and its environment via the
same graphical user interface. All SCADA system functionality needed to be available
for the trainees as it would be in real world operations.

Figure 1 - Enagas Gas Network

Energy Solutions International – All Rights Reserved Page 1


On a complex gas network with high consequences in the event of an accident, the
controllers and operators of the pipelines and storage facilities need to be well trained
for all scenarios, understanding the implication of each scenario and actions to take,
similar to a flight simulator for airline pilots. The simulator would also enable Enagas to
certify and re-certify controllers and operators on a regular basis.

Solution
ESI worked closely with Enagas to implement the simulator using ESI’s
PipelineManager™ (PLM) training module called PLM PipelineTrainer™. The concept of
The PLM PipelineTrainer is based on four main elements, a fully thermo-hydraulic
detailed transient model of the actual Enagas network; an instructor interface; an
operator interface; an automatic evaluation module and a trainer session.
The PLM PipelineTrainer application comprises a set of software modules providing the
following main functions:
• Offline dynamic real time (or faster than real time) pipeline modeling
• Detailed compressor modeling
• Detailed valves modeling
• Detailed regulator modeling
• Simulation of relevant SCADA data and alarms
• Separate Instructor environment that allows for sudden changes i.e.
compressor failure
• Trainee evaluation environment that keeps track of individual Trainees’ training
results
The Trainee Interface (Operator) uses an off-line copy of the SCADA environment,
allowing the operator to interactively enter the same type of commands as in the real
SCADA system, e.g. change of set-points, start/stop of pumps/compressors, close/open
valves. Such entries from the Trainee will have a direct impact on the Model in a
similar manner as control output from the real SCADA system. Thus, the trainee can
observe the reactions of the pipeline as if he/she was operating the real pipeline. This
gives the operator the possibility to perform operations within a safe offline
environment. The solution is described in the graphic below:

Energy Solutions International – All Rights Reserved Page 2


Trainer / Instructor
Console

Process
PLM Communication Scada SCADA
PLM
OPC Server
OPC Unit + OPC Database
Training simulator Training Populate
Training
Clients

Global Network
Model
Data Warehouse
Text file via ftp Training

Key Capabilities

The Key features found in the PLM PipelineTrainer solution are:

• The PLM Trainer solution is based on a fully transient pipeline model built in
PipelineManager capable of providing a mirror image of the actual pipeline
network and related SCADA operations, including:
o Accurate transient simulation of the pipeline network
o Realistic simulation of actual pipeline events
o Adjustable execution speed
o Pause and fast forward functions
o Supports OQ regulation requirements
o Training session with or without instructor interaction
o Session initiation from archives or Real Time (if it is available)
o Enhanced displays, profiling & trending
o Alarm handling
o Chronological Event Log

The system also supports the following operational scenarios to test the response and
performance of the trainees, whether advanced personnel undergoing routine,
periodic training and testing or new personnel learning about the pipeline network for
the first time:

• Start-up and shutdown procedures


• Valve opening and closing sequences
• Set-point controls
• Batch operations
• Pump/Compressor operations
• Normal and abnormal operating conditions
• Emergency simulation operations
Energy Solutions International – All Rights Reserved Page 3
The Trainer can be also used to simulate many incidents, including both leak detection
and theft detection. The following list contains typical training scenarios that the
Trainer is capable of handling:

• Leak simulation
• High/low pressure alarms
• Regulator operations
• Pump/Compressor unit shutdown/startup
• Control valve operation
• Unexpected valve operations
• Valve failure
• Pump/Compressor Failure
• Instrument Failure

Expected Results

Enagas became operational on the new PLM PipelineTrainer solution and quickly began
utilizing the solution for a range of training and testing needs within their organization.
The solution exceeded their expectations in terms of both capabilities and precision in
accurately modeling the real-world network.

Expected Benefits

The PLM Trainer solution will deliver the following benefits for years to come:

 Enable Enagas can train future operators in a controlled and isolated system,
without compromising the safety of the real world transportation network.
 Provides a highly accurate, fully responsive model to interactively train
operators under critical conditions that could not be generated under real
world simulations.
 Offers the operator the feeling of operating the real network, given the high
definition responses the transient application can emulate, without the risk.
 Gives the instructor an objective criterion to measure the performance and
development of the operator’s skills.
 Eliminates the use of special purpose displays created to replicate the SCADA
screens in the operator GUI.

Energy Solutions International – All Rights Reserved Page 4


About Energy Solutions International

Energy Solutions International (ESI) is the leading global supplier of pipeline and energy
transportation design, planning, management and optimization solutions. The company’s
broad range of highly integrated software products and services drive greater operational
efficiency and ROI through optimized design and precise, real-time control to deliver improved
efficiency, transaction management, throughput management, and pipeline safety.

Founded in 1976, ESI offers focused industry expertise and dedicated service to more than 500
clients in 70 countries throughout the Americas, Europe, the Middle East, Asia and Africa. Our
solutions are designed and custom implemented to enhance essential pipeline and energy
transportation work flows, and integrate fully with leading 3rd-party ERP applications as well as
all major SCADA systems.

For more information go to: www.energy-solutions.com

Energy Solutions International – All Rights Reserved Page 5

You might also like