TEST PERMISSABLE TEST PERMISSABLE

ERROR ERROR
____________ ___________
ACTUAL ACTUAL
ERROR ERROR

1 Max. Reading 5 Total Indicator

along length of Reading at end
Bed of 6” Test Bar:
0.0005” 0 to 0.0006” At
In 48 in. end of Spindle
Nose:
____________
0 to 0.0003”
___________

0.000_
0.000_
TAILSTOCK WAY ALIGNMENT
(Use ‘Virgin’ Shear for reference, 0.000_
dependent on Narrow or Wide Guide SPINDLE TAPER RUNOUT
saddle)

2 Total 6 High at end of

Indicator 6” Test Bar
Reading rising towards
Tailstock End
0 to 0.0004”
0 to 0.0005”
____________
___________

0.000_

0,000_
SPINDLE CENTER RUNOUT HEADSTOCK ALIGNMENT - VERTICAL

3 Total 7 At end of 6”
Indicator Test Bar
Reading 0 to 0.0006”
0 to 0.0003” Toward tool
____________ pressure

__________
0.000_
0.000_
SPINDLE NOSE RUNOUT HEADSTOCK ALIGNMENT -
HORIZONTAL

4 Total 8 Forward at end

Indicator of Spindle when
Reading on fully extended
Face of 0 to 0.0006”
Spindle __________
0 to 0.0003
___________ 0.000_

TAILSTOCK SPINDLE ALIGNMENT

CAM ACTION OF SPINDLE 0.000 HORIZONTAL
 TEST PERMISSABLE TEST PERMISSABL
ERROR E ERROR
____________ ___________
ACTUAL ACTUAL
ERROR ERROR

9 High at end of 13 Maximum

Spindle when 0.0003”
fully extended
0 to 0.0005”
____________
___________

0.000_

TAILSTOCK SPINDLE ALIGNMENT 0.000_

VERTICAL
LEADSCREW CAM ACTION

10 End of 6” Test 14 To face

Bar hollow or
0 to 0.0008” concave only
toward tool on 7”
pressure diameter
____________ 0 to 0.0005”
___________

0.000_

TAILSTOCK TAPER ALIGNMENT 0,000_ CROSS SLIDE ALIGNMENT

HORIZONTAL

11 High end of 6” 15 On diameter

or 12” Test Bar 0 to 0.005”
0 to 0.0005” On face at
toward tool normal
pressure diameter
0 to 0.001”
____________ __________

0 000
0.000_
TAILSTOCK TAPER ALIGNMENT 0.000_ FACE PLATE RUNOUT
VERTICAL 0.000_

12 High at 16 Max.
Tailstock deviation from
0 to 0.0008” true
___________ roundness
0.0001”
Must turn
cylindrical 6”
0.000_ length of
12” workpiece
0 to 0.0008”
VERTICAL ALIGMENT OF HEAD AND __________
TAIL CENTERS WORK MOUNTED IN CHUCK 0.000_
0.000_
 TEST PERMISSABLE TEST PERMISSABLE
ERROR ERROR
____________ ___________
ACTUAL ACTUAL
ERROR ERROR

17 Must turn 21 Maximum

cylindrical on a deviation from
12 in. length of reference
work piece 0.003”
.0004” _________
____________ 0.000_
0.000_
12” 0.000_
0 000
0.000_ 0.000_
FRONT WAY WIDTH MEASUREMENT
WORK MOUNTED IN CENTERS (Every 3” along the bed length, use far 0.000_
right of the way as reference) 0.000_

18 +/- 0.001” 22 Maximum

deviation from
reference
0.003”
0.00_ _________
LEAD SCREW LEAD PER FT 0.000_
0.000_
0.000_
REAR WAY WIDTH MEASUREMENT 0.000_
(Every 3” along the bed length, use far 0.000_
right of the way as reference) 0.000_

19 23 M i
Maximum
deviation from
BACK LASH ON CROSS FEED SCREW 0.004” reference
0.00_ 0.003”
____________ _________
0.000_
ON COMPOUND REST SCREW 0.004” 0.000_
0.00_ FRONT TO REAR WAY OVERAL WIDTH 0.000_
MEASUREMENT 0.000_
(Every 3” along the bed length, use far 0.000_
right of the way as reference) 0.000_

20 Indicator 24 Maximum
Reading deviation from
0.001” reference
___________ 0.005”
INDEXING OF SQUARE TURRET __________
Front / Rear
0.00_ 0.00_ 0.00_
0.00_ 0.00_
0.00_ 0.00_
FRONT & REAR WAY OVERAL 0.00_ 0.00_
THICKNESS MEASUREMENT 0.00_ 0.00_
(Every 3” along the bed length, use far 0.00_ 0.00_
right of the way as reference)