Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    320B Excavator Hydraulic System

    Uploaded by

    john ayengah
    This document provides instructions for testing and adjusting the relief valve for the swing function of a 320B excavator hydraulic system. The steps include connecting a pressure gauge, operating the swing control lever in both directions to check the pressure settings, and adjusting the relief valves as needed to maintain a pressure of 24000 ± 980 kPa (3500 ± 140 psi). Adjustments are made by loosening a locknut and turning an adjustment plug clockwise or counterclockwise.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    320B Excavator Hydraulic System

    Uploaded by

    john ayengah
    1K views4 pages
    This document provides instructions for testing and adjusting the relief valve for the swing function of a 320B excavator hydraulic system. The steps include connecting a pressure gauge, operating the swing control lever in both directions to check the pressure settings, and adjusting the relief valves as needed to maintain a pressure of 24000 ± 980 kPa (3500 ± 140 psi). Adjustments are made by loosening a locknut and turning an adjustment plug clockwise or counterclockwise.

    Original Description:

    320B Excavator Hydraulic System

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for testing and adjusting the relief valve for the swing function of a 320B excavator hydraulic system. The steps include connecting a pressure gauge, operating the swing control lever in both directions to check the pressure settings, and adjusting the relief valves as needed to maintain a pressure of 24000 ± 980 kPa (3500 ± 140 psi). Adjustments are made by loosening a locknut and turning an adjustment plug clockwise or counterclockwise.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    1K views4 pages

    320B Excavator Hydraulic System

    Uploaded by

    john ayengah
    This document provides instructions for testing and adjusting the relief valve for the swing function of a 320B excavator hydraulic system. The steps include connecting a pressure gauge, operating the swing control lever in both directions to check the pressure settings, and adjusting the relief valves as needed to maintain a pressure of 24000 ± 980 kPa (3500 ± 140 psi). Adjustments are made by loosening a locknut and turning an adjustment plug clockwise or counterclockwise.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    320B Excavator Hydraulic System / Relief Valve (Swing) - Test and Adjust

    Relief Valve (Swing) - Test and Adjust

    1. Position the machine on level ground.

    2. Stop the engine.

    3. Release the pressure in the hydraulic system. Refer to Testing And Adjusting, "Hydraulic
    System Pressure - Release".

    Pump compartment
    (1) Pressure tap (power shift pressure)
    (2) Pressure tap (upper pump delivery pressure)(3) Pressure tap (lower pump delivery
    pressure)

    4. Connect a 60000 kPa (8700 psi) pressure gauge to pressure tap (3) .
    Swing motor
    (26) Connector(27) Solenoid valve for swing parking brake

    5. Disconnect connector (26) from the solenoid valve for swing parking brake (27) .

    6. Start the engine.

    7. Place the machine controls at the following settings: Power Mode, engine speed dial "10"
    and AEC switch OFF.Reference: Make reference to Testing And Adjusting,
    "Operational Checks" for engine rpm settings.

    8. Increase the hydraulic oil temperature to 55° ± 5°C (131° ± 9°F).

    9. Move the swing control lever slowly and ensure that the swing parking brake is operating
    properly.
    Relief valves (swing motor)
    (22) Adjustment plug
    (23) Locknut
    (24) Relief valve (right swing)(25) Relief valve (left swing)

    10. Slowly move the swing control lever for a full RIGHT swing operation and check the
    pressure setting for relief valve (24) at pressure tap (3) .

    11. Return the swing control lever to the NEUTRAL position.

    12. The pressure setting for the swing relief valve is 24000 ± 980 kPa (3500 ± 140 psi). If the
    pressure setting of the swing relief valve is not within the specification, adjust the swing
    relief valve.

    13. In order to adjust the swing relief valve, loosen locknut (23). Turn adjustment plug (22)
    until the pressure gauge reading at pressure tap (3) is 24000 ± 980 kPa (3500 ± 140
    psi).Note: Turning adjustment plug (22) clockwise increases the pressure. Turning
    adjustment plug (22) counterclockwise decreases the pressure.

    14. Tighten locknut (23) to a torque of 160 ± 30 N·m (120 ± 22 lb ft).

    15. Slowly move the swing control lever for a full LEFT swing operation and check the
    pressure for relief valve (25) at pressure tap (3) .

    16. Return the swing control lever to the NEUTRAL position.

    17. The pressure setting for the swing relief valve is 24000 ± 980 kPa (3500 ± 140 psi). If the
    pressure setting of the swing relief valve is not within the specification, adjust the swing
    relief valve.
    18. Adjust relief valve (25) for left swing in the same manner as relief valve (24) for right
    swing.Note: Always make final pressure adjustments on pressure rise.

    You might also like