Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Is 875 2015 Wind Loads Calculation Typical Frame

    Uploaded by

    Mangesh Chorge
    The document provides details on calculating wind loads for a structural analysis project. It includes dimensions and geometry of the building, wind speed and pressure calculations considering various factors, and wind coefficients for walls, roof, frames, and other building elements. The wind loads and coefficients will be used to model and analyze the structural response of the building to wind forces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Is 875 2015 Wind Loads Calculation Typical Frame

    Uploaded by

    Mangesh Chorge
    1K views2 pages
    The document provides details on calculating wind loads for a structural analysis project. It includes dimensions and geometry of the building, wind speed and pressure calculations considering various factors, and wind coefficients for walls, roof, frames, and other building elements. The wind loads and coefficients will be used to model and analyze the structural response of the building to wind forces.

    Original Description:

    Wind Loads Calculation as Is 875 2015

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides details on calculating wind loads for a structural analysis project. It includes dimensions and geometry of the building, wind speed and pressure calculations considering various factors, and wind coefficients for walls, roof, frames, and other building elements. The wind loads and coefficients will be used to model and analyze the structural response of the building to wind forces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views2 pages

    Is 875 2015 Wind Loads Calculation Typical Frame

    Uploaded by

    Mangesh Chorge
    The document provides details on calculating wind loads for a structural analysis project. It includes dimensions and geometry of the building, wind speed and pressure calculations considering various factors, and wind coefficients for walls, roof, frames, and other building elements. The wind loads and coefficients will be used to model and analyze the structural response of the building to wind forces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Page 1 Wind Load Calcs

    Wind Loading for STAAD For (IS-875-Part-3-2015) Developed by


    Project M135
    Building Usage All other General Bldg
    Offshore Wind Velocity No Yellow
    L-Length of building (Greater hoz dim. Of bldg.) m 125 colour is
    W-Width of building (Lesser hoz dim. Of bldg.) m 60.23 Input
    h1-Height of plinth m 1.2
    h2-Eaves height from FFL m 10.1
    h-Eaves height from FGL m 11.3
    Building Geometry Area (m2) >>>>> Raft
    S - Bay spacing of frame (Trib. of Frame Raft. & Col.) m 8 80.8 col 481.84
    Sp - Purlin Tributary m 1.4 11.2
    Sg - Girt Tributary m 1.4 11.2

    Roof Slope 1.0: 10.0


    Vb-Basic wind speed m/sec 44 44
    N-Design life of structure; mean probable Years 50
    Terrain Category 2
    Category1- Exposed open terrain with few or no obstructions in the structure.
    Category2- Open terrain with well scattered obstructions in the structure.
    Category3- Terrain with numerous closely spaced obstructions in the structure.
    Category4- Terrain with numerous closely spaced high obstructions in the structure.

    Upwind Slope side length 60.23 m From Flat terrain


    Ground height in hill area 0 m From Flat terrain
    Upwind Slope 0 Deg. From Flat terrain

    K1-Risk Coeff. (Propability Factor) 1


    HT Max Height of building from FGL m 11.3

    Table 2-IS-875 (Part3)-2015


    K2-Terrain,Str-height &size factor Category 2

    K2-Terrain Roughness & Height Factor 1.013


    K3-Topography Factor 1
    K4- Impotance Factor for Cyclonic Region 1
    Shape of Structure Triangular,Square,Rectangular
    Kd - Wind directionality factor 0.9
    Ka - Area averaging factor 0.8 0.8 0.9 0.9
    Frame Raft. Frame Col Purlin Girt
    Kc - Combination factor (ref. clause no - 7.3.3.13) 0.9

    Vz-Design wind speed m/sec 44.572 Vz = k1 x k2 x k3 x k4


    Pz- Wind pressure KN/m^2 1.192 Pz = 0.6 x Vz x Vz
    Pd-Design wind pressure, For Frame Raft KN/m^2 0.772 Pd = Kd x Ka x Kc x Pz
    For Frame Col KN/m^2 0.772
    For Purlin KN/m^2 0.869
    For Girt KN/m^2 0.869

    Min Pd as per Codal Provision KN/m^2 0.834 Pd Min = 0.7 x Pz


    (Actual Consideration of Design Wind Pressure below)
    Pd-Design wind pressure, For Frame Raft KN/m^2 0.834
    For Frame Col KN/m^2 0.834
    For Purlin KN/m^2 0.869
    For Girt KN/m^2 0.869

    Percentage of Openings 0-5 % Ref. From other excel sheet

    Cpe-External Pressure coeff for walls w C


    Table No.5 IS 875 (Part3) -2015
    A B
    h
    D
    Elevation Plan
    Page 2 Wind Load Calcs

    h/w 0.188
    L/w 2.075

    Wind Angle A B C D Local


    0o to wall 0.7 -0.25 -0.6 -0.6 -1
    90oII to wall -0.5 -0.5 0.7 -0.1 -1

    Cpe-External Pressure coeff for Pitched Roof of Single Span Bldg.


    Table No.6 IS 875 (Part3) -2015
    Roof Angle in degrees 5.71
    Wind Angle 0o  to ridge

    EF GH

    Elevation

    E G

    L
    Wind
    F H

    w
    Plan
    Roof Angle 0
    Roof Angle-1 5
    Roof Angle-2 10

    Roof Wind Angle= 0o Wind Angle= 90o


    Angle EF GH EG FH
    5 -0.90 -0.40 -0.80 -0.40
    10 -1.20 -0.40 -0.80 -0.60
    5.71 -0.94 -0.40 -0.80 -0.43

    Local coeff = -2.0

    Wind Drag

    Cpi-Internal Pressure Coeff 0.2 +/-0.2


    Opennings not more than 5% of wall area 0.2
    Opennings between 5% to 20% of wall area 0.5
    Opennings larger than than 20% of wall area 0.7

    Parapet Wind/ Force Coefficient +/- 1.30 1.3


    Tota Local Coefficient for Wall -1.2 -1.2
    Tota Local Coefficient for Roof -2.2 -2.2

    C/C of Frames/Portal/Columns m 8
    C/C of Gable end columns m 6.0
    Wind Load due to Internal +ve Eves Col KN/m 1.34
    Wind Load due to Internal +ve Gable Col KN/m 1.00

    +ve sign indicates force acting towards the member, -ve sign indicates force acting away from member

    RIGID FRAME COEFFICIENT

    *(23) WIND COEFFICIENTS


    *Surf Wind_ 1 Wind_ 2 Long _Wind Surface
    *Id Left Right Left Right 1 2 Friction
    1 0.5 -0.45 0.9 -0.05 -0.7 -0.3 0
    2 -1.14 -0.60 -0.74 -0.20 -1.00 -0.60 0
    3 -0.60 -1.14 -0.20 -0.74 -1.00 -0.60 0
    4 -0.45 0.5 -0.05 0.9 -0.7 -0.3 0

    You might also like