Aims Brochure
Aims Brochure
Aims Brochure
Water Engineering
v
STP v
ETP v
WTP v
RO v
DM etc.,
www.aimschennai.in Mail: info@aimschennai.in
ABOUT AIMS
? AIMS is registered as a private limited company, under Company Act 1956. It is, fundamentally, a
strong engineering organization carrying experience of more than a decade in water engineering.
? AIMS is a young, vibrant organization with strong technical expertise and experience, in the chosen
field of business. It has a combination of youthful jest bonded with practical, “in field” experience.
? We are in the water treatment, Sewage Treatment and management business. Whatever your
requirements on water & effluent treatment; we try to bring about clear, technically superior and
cost effective solutions. Water treatment and Sewage Treatment have evolved as a business, but
we believe that there is tremendous scope to improve the quality of products, services and solutions
offered to the customer. These aspects are, till date, not fully made available to the end user.
? We are ready to bring a paradigm shift in the way this business is currently conducted, through our
team, our conceptualization, execution, through our service, through relentless R & D by its Sister
Concern AIMS O & M SERVICES to bring about real CUSTOMER SATISFACTION.
? The Company provides consultancy services, manufactures equipment and executes turkey projects
in the field of water engineering (Water/ Wastewater/ Sewage/Evaporator plants). Water
Engineering is a highly specialized process; therefore we keep on upgrading our
technologies to compete in the Indian market.
?
Through our advanced in-house design and engineering capabilities, we have recently evolved in the
market as a leading company, supplying systems and equipment that provide end to end solutions
for Water Treatment, Waste Water Treatment, Sewage Treatment and Effluent Evaporation. In our
endeavour to purify water / wastewater and contribute in the efforts to have pollution free
environment, we ensure that our machines are eco-friendly and conform to stringent laws set by the
Government of India
.
The combined staff strength is around 30 all dedicated persons headed by a dynamic and hands on
Managing Director and Executive Director.
The service engineers around 15 are ably guided and being updated training by the Vice President
– Projects to execute and complete projects in high engineering standards and in time.
AIMS IS
Members
OUR INFRASTRUCTURE
Source Investigation
Supply erection and commissioning of Sprinkler System
Our core touch point therefore is a dedicated PHONE LINE for attending
service calls and our coordinator will cooperate with clients to ensure services
in time.
More than 60% of our staff strength are exclusively assigned to attend
service calls. With this in view, we have opened up service centres at
Bangalore, Trichy and Coimbatore to reach our customers in the shortest
time. We have also planned to open a Service Centre at Hyderabad.
What's more, this entire initiative is executed from our subsidiary company
(AIMS O & M Services) just formed to handle services.
Our commitment to serve our customers will remain our driving force for the
years to come.
PRODUCTS IN INDUSTRIAL DIVISION
Polyelectrolyte
SERVICES AND O&M
Cleaning and chemical dosing - Sumps, Overhead Tanks and Civil Tanks
t
DETAILS OF THE PRODUCT
In today’s environment,
chemical addition is
becoming less acceptable
due to more stringent
regulations.
AEORA-tech (EC) is cheaper than conventional system when the cost of STP – (plant and
machinery + Civil) is compared
AEORA-tech (EC) is “area – free”. It requires less civil works and the units are modular
and can be kept anywhere –under ground, above ground, basement, terrace.....
AEORA-tech (EC) is “quantity-free”. All biological systems fail when they need to operate
at lesser than design loads-say at30% of load. AEORA-tech can operate at ANY LOAD
AEORA-tech (EC) is modular. Based on needs, customers can add additional trains
of AEORA-tech.
AEORA-tech (EC) has been running for MORE THAN 6 Years in more than
100+installations in India.
AEORA-tech( EC) is available for our customers, from 10.0M3/day (AEORA-tech for
a house) to 1000 M3/day (1MLD) plant.
Reduces dependence on external source for water supply for various uses
SAFF is “safe”. It is time tested, reliable and one of the very few biological
systems wherein control of STP Performance is within the manageable
range.
SAFF provides relatively clear treated water with consistent outlet BOD
SAFF generates lesser bacterial sloughing and does not require extensive
sludge management systems.
Submerged Aerobic Fixed Film [SAFF]
tSAFF is the biological process alternative to FBR (Fluidized Bed Reactor), RBC
(Rotating Biological Contactors) and other such attached growth processes
SBR (SEQUENCING BATCH REACTOR)
tSequencing batch reactors (SBR) are Industrial processing tanks for the
treatment of wastewater. SBR reactor treat waste water such as sewage or
output from anaerobic digesters or mechanical biological treatment facilities
in batches.
tWhile there are several configurations of SBRs the basic process is similar.
The installation consists of at least two identically equipped tanks with a
common inlet, Which can be switched between them.
tThe tanks gave a “flow through” system, with raw wastewater (influent) coming
in at one end and treated water (effluent) flowing out the other. While one tank
is in settle/decent mode the other is aerating and filling. At the inlet is a section
of the tank known as the bio-selector. This consists of a series of walls of
baffles which direct the flow either from side to side of the tank or under and
over consecutive baffles.
tThis helps to mix the incoming Influent and the returned activated sludge,
beginning the biological digestion process before the liquor enters the main part
of the tank.
FBBR (FLUIDISED BED BIO REACTOR)
AIMS developed the in-house state of the art Fluidised Bed Bio-reactor
AIMS FBBR which can be used for any type of process wastewater and
municipal wastewater achieving high efficiency.
It offers features like, quick start up, self cleaning, fully automatic
once in operation, automatic sludge separation, and "mess free"
robust operation with central up-front control, systems for both
sewage and industrial wastewater.
Air generated from air blower is diffused into the bottom of the reactor vessel. The
oxygen supply is automatically adjusted to maintain the proper dissolved oxygen
level in the vessel. A high concentration of biomass develops because of the large
media surface area, abundant oxygen and optimized mass transfer conditions.
Excess biomass is automatically sheared at the discharge point for removal.
FOOT PRINT – FLOW CHART FOR CIVIL TANK OF STP
tIn the Process the pressure needed to push water through the membrane,
even as the membrane rejects the passage of salt through it. Typical
pressures for Raw / brackish water range from 8.0 to 26 bar. In the case of
seawater, they range from 55 to 81.0 bar .This requires a large amount of
energy. Hence High Pressure pumps are mandatory and considered to be
heart of the system.
Suspended Particle Filtration : Clarifier or Multi-grade Sand filter is vital part during the pre-
v
tVisual monitoring system (VMS) for ease of trouble-shooting if required.
treatment to remove or minimize the load of the suspended particles, dirt, mud etc. thus protecting the
Micron cartridge filters and membranes.
tStainless steel multistage centrifugal pump; inline suction and delivery allows easy
maintenance
De-chlorination
v & and access
De-colourisation : It is necessary to remove colour, odour and chlorine from the
water and hence Activated Carbon filter is considered . In some cases Sodium meta bi-sulphite
t Membrane
chemical and pump
is been dosed in the protection
filtered waterfeatures
to ensure the water is free from dissolved chlorine thus
protecting the Reverse Osmosis membranes from the possible damage!
t'RO Advantage' enhanced through minimum pipe length to reduce system
Scale Prevention : Ion exchange resin for softening of water plays key role to reduce the load of total
v
resistance
hardness. The Calcium and magnesium salts has been removed and replaced with sodium salts by
means of water softener. In some cases Antiscalent chemical is been dosed in the filtered water to
t Easy servicing with QRC (Quick Release Coupling)
ensure the water with lesser load of total hardness in the feed water , thus protecting the Reverse
Osmosis membranes from the possible damage !
tMaterial of construction: CPVC/SS
Treatment Stages during Reverse Osmosis Process
Pre-Treatment:
Sedimentation : High molecular weight chemicals such as alum or polyelectrolyte is been dosed in the
v
raw water to increase filtration efficiency
Chlorination : Bleaching Powder or Sodium Hypochlorite solution is been dosed in the raw water to
v
decrease the bacterial & Viral contamination
Suspended Particle Filtration : Clarifier or Multi-grade Sand filter is vital part during the pre-
v
treatment to remove or minimize the load of the suspended particles, dirt, mud etc. thus protecting the
Micron cartridge filters and membranes.
De-chlorination & De-colourisation : It is necessary to remove colour, odour and chlorine from the
v
water and hence Activated Carbon filter is considered . In some cases Sodium meta bi-sulphite
chemical is been dosed in the filtered water to ensure the water is free from dissolved chlorine thus
protecting the Reverse Osmosis membranes from the possible damage!
Scale Prevention : Ion exchange resin for softening of water plays key role to reduce the load of total
v
hardness. The Calcium and magnesium salts has been removed and replaced with sodium salts by
means of water softener. In some cases Antiscalent chemical is been dosed in the filtered water to
ensure the water with lesser load of total hardness in the feed water , thus protecting the Reverse
Osmosis membranes from the possible damage !
Treatment Stages during Reverse Osmosis Process
tMicron Filtration : Micron cartridges of different ratings is the vital part in the pretreatment
which removes particle sizes upto 1micron to ensure efficient and safe operation of RO water
plant.
OR
tUltra Filtration : This is most efficient membrane filtration technology in pretreatment which
efficiently remove a wide range of microscopic particles, colloidal matter and pathogens, including
viruses and bacteria , and total hardness in the raw water thus substantially improving the
recovery and performance of RO water plant.
UV
UV : Ultraviolet water purification lamps produce UV-C or "germicidal UV," radiation of much
greater intensity than sunlight. Almost all of a UV lamp's output is concentrated in the 254
nanometers (nm) region in order to take full advantage of the germicidal properties of this
wavelength. Most ultraviolet purification systems are combined with various forms of filtration, as
UV light is only capable of killing microorganisms such as bacteria, viruses, molds, algae, yeast,
and oocysts like cryptosporidium and giardia. UV light generally has no impact on chlorine, VOCs,
heavy metals, and other chemical contaminants. Nevertheless, it is probably the most cost
effective and efficient technology available to homeowners to eliminate a wide range of biological
contaminants from their water supply. Recent testing has also shown that UV can be effective at
destroying certain VOC's, although we would not specifically recommend the technology for VOC
reduction.
REVAMPING OF WATER &
WASTEWATER SYSTEMS
Manufacturing
v
Supplying
v
Servicing
v
Revamping
v
Repairing
v
O & M Services
v
ISO 9001:2008 CERTICATION
MEMBERSHIP CERTICATES
MEMBERSHIP CERTICATES
OUR GROUPS
AIMS P. LTD.
10-A, Dr.Raja Annamalai Road, Chennai 600 084.
H.O. 044 - 26610990/26613151, Admin : 26400654/655
www.aimschennai.in / Mail : info@aimschennai.in