Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 435 views

    Datasheet Feroform T814

    Uploaded by

    njsmith5
    FEROFORM T814 is a composite bearing material made from woven fiber, resin, and PTFE. It has been developed for high performance in wet or dry service, making it useful for hydro and marine applications. T814 replaces traditional grease lubricated bearings by promoting a cleaner environment and reducing operating costs. The material is available in sheets and tubes of various sizes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Datasheet Feroform T814

    Uploaded by

    njsmith5
    435 views1 page
    FEROFORM T814 is a composite bearing material made from woven fiber, resin, and PTFE. It has been developed for high performance in wet or dry service, making it useful for hydro and marine applications. T814 replaces traditional grease lubricated bearings by promoting a cleaner environment and reducing operating costs. The material is available in sheets and tubes of various sizes.

    Original Description:

    feroform t814

    Original Title

    Datasheet-Feroform-T814

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    FEROFORM T814 is a composite bearing material made from woven fiber, resin, and PTFE. It has been developed for high performance in wet or dry service, making it useful for hydro and marine applications. T814 replaces traditional grease lubricated bearings by promoting a cleaner environment and reducing operating costs. The material is available in sheets and tubes of various sizes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    435 views1 page

    Datasheet Feroform T814

    Uploaded by

    njsmith5
    FEROFORM T814 is a composite bearing material made from woven fiber, resin, and PTFE. It has been developed for high performance in wet or dry service, making it useful for hydro and marine applications. T814 replaces traditional grease lubricated bearings by promoting a cleaner environment and reducing operating costs. The material is available in sheets and tubes of various sizes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    FEROFORM T814

    High Performance Bearing Material


    TENMAT FEROFORM T814 is a composite
    material made from woven fibre bonded with
    resin and PTFE as a friction modifier.

    FEROFORM T814 has been developed as a


    high performance bearing material for both wet
    and dry service, making it extremely useful in
    Hydro and Marine applications.

    TENMAT FEROFORM T814 replaces


    traditional grease lubricated bearings,
    promoting a cleaner environment whilst
    reducing operating cost.

    The material is available as sheets (48”x48”) with various thicknesses and tubes (48” long) with
    diameters ranging from 1” up to 38”.

    PROPERTY UNITS T814


    Coefficient of Friction Dry 0.07 - 0.10
    Compressive Strength MPa @ ambient (A/B) 310 / >400

    Normal Working Pressure MPa 75

    Compressive Yield % @ 68.9 MPa 4.3

    Impact Strength kJ/m2 83

    Shear Strength MPa 72


    Brinell Hardness 17

    Swell in Water % @ 20 °C 0.25


    Technical Data Sheet

    Density g / cm3 1.31

    10-6/°C Normal 43
    Coefficient of Thermal Expansion
    10-6/°C Parallel 31
    Maximum Continuous Operating
    °C 100
    Temperature
    Maximum Intermittent Operating
    °C 120
    Temperature
    *A tested on BS2782 on 25 x 25 x 25 sample
    *B tested on 50 x 50 x 5 sample, 400 MP is limit of test equipment
    Tested on sheets samples, PR18 tested on tube samples
    The information contained in this data sheet is presented in good faith. They are typical test results tested generally in accordance with BS 2782 and ASTM test methods and should not be
    used for specifications. TENMAT does not warrant the conformity of its materials to the listed properties or their suitability for any particular purpose.
    For further information please contact our Technical Sales Department on +44 161 872 2181.

    TENMAT Ltd. Ashburton Road West Manchester M17 1TD T: +44 161 872 2181 E: info@tenmat.com www.TENMAT.com

    You might also like